diff options
Diffstat (limited to 'drivers/media/pci/cobalt/cobalt-i2c.c')
| -rw-r--r-- | drivers/media/pci/cobalt/cobalt-i2c.c | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/drivers/media/pci/cobalt/cobalt-i2c.c b/drivers/media/pci/cobalt/cobalt-i2c.c new file mode 100644 index 000000000000..ad16b89b8d0c --- /dev/null +++ b/drivers/media/pci/cobalt/cobalt-i2c.c @@ -0,0 +1,396 @@ +/* + * cobalt I2C functions + * + * Derived from cx18-i2c.c + * + * Copyright 2012-2015 Cisco Systems, Inc. and/or its affiliates. + * All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "cobalt-driver.h" +#include "cobalt-i2c.h" + +struct cobalt_i2c_regs { + /* Clock prescaler register lo-byte */ + u8 prerlo; + u8 dummy0[3]; + /* Clock prescaler register high-byte */ + u8 prerhi; + u8 dummy1[3]; + /* Control register */ + u8 ctr; + u8 dummy2[3]; + /* Transmit/Receive register */ + u8 txr_rxr; + u8 dummy3[3]; + /* Command and Status register */ + u8 cr_sr; + u8 dummy4[3]; +}; + +/* CTR[7:0] - Control register */ + +/* I2C Core enable bit */ +#define M00018_CTR_BITMAP_EN_MSK (1 << 7) + +/* I2C Core interrupt enable bit */ +#define M00018_CTR_BITMAP_IEN_MSK (1 << 6) + +/* CR[7:0] - Command register */ + +/* I2C start condition */ +#define M00018_CR_BITMAP_STA_MSK (1 << 7) + +/* I2C stop condition */ +#define M00018_CR_BITMAP_STO_MSK (1 << 6) + +/* I2C read from slave */ +#define M00018_CR_BITMAP_RD_MSK (1 << 5) + +/* I2C write to slave */ +#define M00018_CR_BITMAP_WR_MSK (1 << 4) + +/* I2C ack */ +#define M00018_CR_BITMAP_ACK_MSK (1 << 3) + +/* I2C Interrupt ack */ +#define M00018_CR_BITMAP_IACK_MSK (1 << 0) + +/* SR[7:0] - Status register */ + +/* Receive acknowledge from slave */ +#define M00018_SR_BITMAP_RXACK_MSK (1 << 7) + +/* Busy, I2C bus busy (as defined by start / stop bits) */ +#define M00018_SR_BITMAP_BUSY_MSK (1 << 6) + +/* Arbitration lost - core lost arbitration */ +#define M00018_SR_BITMAP_AL_MSK (1 << 5) + +/* Transfer in progress */ +#define M00018_SR_BITMAP_TIP_MSK (1 << 1) + +/* Interrupt flag */ +#define M00018_SR_BITMAP_IF_MSK (1 << 0) + +/* Frequency, in Hz */ +#define I2C_FREQUENCY 400000 +#define ALT_CPU_FREQ 83333333 + +static struct cobalt_i2c_regs __iomem * +cobalt_i2c_regs(struct cobalt *cobalt, unsigned idx) +{ + switch (idx) { + case 0: + default: + return (struct cobalt_i2c_regs __iomem *) + (cobalt->bar1 + COBALT_I2C_0_BASE); + case 1: + return (struct cobalt_i2c_regs __iomem *) + (cobalt->bar1 + COBALT_I2C_1_BASE); + case 2: + return (struct cobalt_i2c_regs __iomem *) + (cobalt->bar1 + COBALT_I2C_2_BASE); + case 3: + return (struct cobalt_i2c_regs __iomem *) + (cobalt->bar1 + COBALT_I2C_3_BASE); + case 4: + return (struct cobalt_i2c_regs __iomem *) + (cobalt->bar1 + COBALT_I2C_HSMA_BASE); + } +} + +/* Do low-level i2c byte transfer. + * Returns -1 in case of an error or 0 otherwise. + */ +static int cobalt_tx_bytes(struct cobalt_i2c_regs __iomem *regs, + struct i2c_adapter *adap, bool start, bool stop, + u8 *data, u16 len) +{ + unsigned long start_time; + int status; + int cmd; + int i; + + for (i = 0; i < len; i++) { + /* Setup data */ + iowrite8(data[i], ®s->txr_rxr); + + /* Setup command */ + if (i == 0 && start != 0) { + /* Write + Start */ + cmd = M00018_CR_BITMAP_WR_MSK | + M00018_CR_BITMAP_STA_MSK; + } else if (i == len - 1 && stop != 0) { + /* Write + Stop */ + cmd = M00018_CR_BITMAP_WR_MSK | + M00018_CR_BITMAP_STO_MSK; + } else { + /* Write only */ + cmd = M00018_CR_BITMAP_WR_MSK; + } + + /* Execute command */ + iowrite8(cmd, ®s->cr_sr); + + /* Wait for transfer to complete (TIP = 0) */ + start_time = jiffies; + status = ioread8(®s->cr_sr); + while (status & M00018_SR_BITMAP_TIP_MSK) { + if (time_after(jiffies, start_time + adap->timeout)) + return -ETIMEDOUT; + cond_resched(); + status = ioread8(®s->cr_sr); + } + + /* Verify ACK */ + if (status & M00018_SR_BITMAP_RXACK_MSK) { + /* NO ACK! */ + return -EIO; + } + + /* Verify arbitration */ + if (status & M00018_SR_BITMAP_AL_MSK) { + /* Arbitration lost! */ + return -EIO; + } + } + return 0; +} + +/* Do low-level i2c byte read. + * Returns -1 in case of an error or 0 otherwise. + */ +static int cobalt_rx_bytes(struct cobalt_i2c_regs __iomem *regs, + struct i2c_adapter *adap, bool start, bool stop, + u8 *data, u16 len) +{ + unsigned long start_time; + int status; + int cmd; + int i; + + for (i = 0; i < len; i++) { + /* Setup command */ + if (i == 0 && start != 0) { + /* Read + Start */ + cmd = M00018_CR_BITMAP_RD_MSK | + M00018_CR_BITMAP_STA_MSK; + } else if (i == len - 1 && stop != 0) { + /* Read + Stop */ + cmd = M00018_CR_BITMAP_RD_MSK | + M00018_CR_BITMAP_STO_MSK; + } else { + /* Read only */ + cmd = M00018_CR_BITMAP_RD_MSK; + } + + /* Last byte to read, no ACK */ + if (i == len - 1) + cmd |= M00018_CR_BITMAP_ACK_MSK; + + /* Execute command */ + iowrite8(cmd, ®s->cr_sr); + + /* Wait for transfer to complete (TIP = 0) */ + start_time = jiffies; + status = ioread8(®s->cr_sr); + while (status & M00018_SR_BITMAP_TIP_MSK) { + if (time_after(jiffies, start_time + adap->timeout)) + return -ETIMEDOUT; + cond_resched(); + status = ioread8(®s->cr_sr); + } + + /* Verify arbitration */ + if (status & M00018_SR_BITMAP_AL_MSK) { + /* Arbitration lost! */ + return -EIO; + } + + /* Store data */ + data[i] = ioread8(®s->txr_rxr); + } + return 0; +} + +/* Generate stop condition on i2c bus. + * The m00018 stop isn't doing the right thing (wrong timing). + * So instead send a start condition, 8 zeroes and a stop condition. + */ +static int cobalt_stop(struct cobalt_i2c_regs __iomem *regs, + struct i2c_adapter *adap) +{ + u8 data = 0; + + return cobalt_tx_bytes(regs, adap, true, true, &data, 1); +} + +static int cobalt_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) +{ + struct cobalt_i2c_data *data = adap->algo_data; + struct cobalt_i2c_regs __iomem *regs = data->regs; + struct i2c_msg *pmsg; + unsigned short flags; + int ret = 0; + int i, j; + + for (i = 0; i < num; i++) { + int stop = (i == num - 1); + + pmsg = &msgs[i]; + flags = pmsg->flags; + + if (!(pmsg->flags & I2C_M_NOSTART)) { + u8 addr = pmsg->addr << 1; + + if (flags & I2C_M_RD) + addr |= 1; + if (flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + for (j = 0; j < adap->retries; j++) { + ret = cobalt_tx_bytes(regs, adap, true, false, + &addr, 1); + if (!ret) + break; + cobalt_stop(regs, adap); + } + if (ret < 0) + return ret; + ret = 0; + } + if (pmsg->flags & I2C_M_RD) { + /* read bytes into buffer */ + ret = cobalt_rx_bytes(regs, adap, false, stop, + pmsg->buf, pmsg->len); + if (ret < 0) + goto bailout; + } else { + /* write bytes from buffer */ + ret = cobalt_tx_bytes(regs, adap, false, stop, + pmsg->buf, pmsg->len); + if (ret < 0) + goto bailout; + } + } + ret = i; + +bailout: + if (ret < 0) + cobalt_stop(regs, adap); + return ret; +} + +static u32 cobalt_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +/* template for i2c-bit-algo */ +static struct i2c_adapter cobalt_i2c_adap_template = { + .name = "cobalt i2c driver", + .algo = NULL, /* set by i2c-algo-bit */ + .algo_data = NULL, /* filled from template */ + .owner = THIS_MODULE, +}; + +static const struct i2c_algorithm cobalt_algo = { + .master_xfer = cobalt_xfer, + .functionality = cobalt_func, +}; + +/* init + register i2c algo-bit adapter */ +int cobalt_i2c_init(struct cobalt *cobalt) +{ + int i, err; + int status; + int prescale; + unsigned long start_time; + + cobalt_dbg(1, "i2c init\n"); + + /* Define I2C clock prescaler */ + prescale = ((ALT_CPU_FREQ) / (5 * I2C_FREQUENCY)) - 1; + + for (i = 0; i < COBALT_NUM_ADAPTERS; i++) { + struct cobalt_i2c_regs __iomem *regs = + cobalt_i2c_regs(cobalt, i); + struct i2c_adapter *adap = &cobalt->i2c_adap[i]; + + /* Disable I2C */ + iowrite8(M00018_CTR_BITMAP_EN_MSK, ®s->cr_sr); + iowrite8(0, ®s->ctr); + iowrite8(0, ®s->cr_sr); + + start_time = jiffies; + do { + if (time_after(jiffies, start_time + HZ)) { + if (cobalt_ignore_err) { + adap->dev.parent = NULL; + return 0; + } + return -ETIMEDOUT; + } + status = ioread8(®s->cr_sr); + } while (status & M00018_SR_BITMAP_TIP_MSK); + + /* Disable I2C */ + iowrite8(0, ®s->ctr); + iowrite8(0, ®s->cr_sr); + + /* Calculate i2c prescaler */ + iowrite8(prescale & 0xff, ®s->prerlo); + iowrite8((prescale >> 8) & 0xff, ®s->prerhi); + /* Enable I2C, interrupts disabled */ + iowrite8(M00018_CTR_BITMAP_EN_MSK, ®s->ctr); + /* Setup algorithm for adapter */ + cobalt->i2c_data[i].cobalt = cobalt; + cobalt->i2c_data[i].regs = regs; + *adap = cobalt_i2c_adap_template; + adap->algo = &cobalt_algo; + adap->algo_data = &cobalt->i2c_data[i]; + adap->retries = 3; + sprintf(adap->name + strlen(adap->name), + " #%d-%d", cobalt->instance, i); + i2c_set_adapdata(adap, &cobalt->v4l2_dev); + adap->dev.parent = &cobalt->pci_dev->dev; + err = i2c_add_adapter(adap); + if (err) { + if (cobalt_ignore_err) { + adap->dev.parent = NULL; + return 0; + } + while (i--) + i2c_del_adapter(&cobalt->i2c_adap[i]); + return err; + } + cobalt_info("registered bus %s\n", adap->name); + } + return 0; +} + +void cobalt_i2c_exit(struct cobalt *cobalt) +{ + int i; + + cobalt_dbg(1, "i2c exit\n"); + + for (i = 0; i < COBALT_NUM_ADAPTERS; i++) { + cobalt_err("unregistered bus %s\n", cobalt->i2c_adap[i].name); + i2c_del_adapter(&cobalt->i2c_adap[i]); + } +} |