diff options
Diffstat (limited to 'drivers/media/video/planb.c')
| -rw-r--r-- | drivers/media/video/planb.c | 2309 |
1 files changed, 0 insertions, 2309 deletions
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c deleted file mode 100644 index 36047d4e70f6..000000000000 --- a/drivers/media/video/planb.c +++ /dev/null @@ -1,2309 +0,0 @@ -/* - planb - PlanB frame grabber driver - - PlanB is used in the 7x00/8x00 series of PowerMacintosh - Computers as video input DMA controller. - - Copyright (C) 1998 Michel Lanners (mlan@cpu.lu) - - Based largely on the bttv driver by Ralph Metzler (rjkm@thp.uni-koeln.de) - - Additional debugging and coding by Takashi Oe (toe@unlserve.unl.edu) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* $Id: planb.c,v 1.18 1999/05/02 17:36:34 mlan Exp $ */ - -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/vmalloc.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <linux/wait.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/dbdma.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/irq.h> -#include <linux/mutex.h> - -#include "planb.h" -#include "saa7196.h" - -/* Would you mind for some ugly debugging? */ -#if 0 -#define DEBUG(x...) printk(KERN_DEBUG ## x) /* Debug driver */ -#else -#define DEBUG(x...) /* Don't debug driver */ -#endif - -#if 0 -#define IDEBUG(x...) printk(KERN_DEBUG ## x) /* Debug interrupt part */ -#else -#define IDEBUG(x...) /* Don't debug interrupt part */ -#endif - -/* Ever seen a Mac with more than 1 of these? */ -#define PLANB_MAX 1 - -static int planb_num; -static struct planb planbs[PLANB_MAX]; -static volatile struct planb_registers *planb_regs; - -static int def_norm = PLANB_DEF_NORM; /* default norm */ -static int video_nr = -1; - -module_param(def_norm, int, 0); -MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)"); -module_param(video_nr, int, 0); -MODULE_LICENSE("GPL"); - - -/* ------------------ PlanB Exported Functions ------------------ */ -static long planb_write(struct video_device *, const char *, unsigned long, int); -static long planb_read(struct video_device *, char *, unsigned long, int); -static int planb_open(struct video_device *, int); -static void planb_close(struct video_device *); -static int planb_ioctl(struct video_device *, unsigned int, void *); -static int planb_init_done(struct video_device *); -static int planb_mmap(struct video_device *, const char *, unsigned long); -static void release_planb(void); -int init_planbs(struct video_init *); - -/* ------------------ PlanB Internal Functions ------------------ */ -static int planb_prepare_open(struct planb *); -static void planb_prepare_close(struct planb *); -static void saa_write_reg(unsigned char, unsigned char); -static unsigned char saa_status(int, struct planb *); -static void saa_set(unsigned char, unsigned char, struct planb *); -static void saa_init_regs(struct planb *); -static int grabbuf_alloc(struct planb *); -static int vgrab(struct planb *, struct video_mmap *); -static void add_clip(struct planb *, struct video_clip *); -static void fill_cmd_buff(struct planb *); -static void cmd_buff(struct planb *); -static volatile struct dbdma_cmd *setup_grab_cmd(int, struct planb *); -static void overlay_start(struct planb *); -static void overlay_stop(struct planb *); -static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *, unsigned short, - unsigned int); -static inline void tab_cmd_store(volatile struct dbdma_cmd *, unsigned int, - unsigned int); -static inline void tab_cmd_gen(volatile struct dbdma_cmd *, unsigned short, - unsigned short, unsigned int, unsigned int); -static int init_planb(struct planb *); -static int find_planb(void); -static void planb_pre_capture(int, int, struct planb *); -static volatile struct dbdma_cmd *cmd_geo_setup(volatile struct dbdma_cmd *, - int, int, int, int, int, struct planb *); -static inline void planb_dbdma_stop(volatile struct dbdma_regs *); -static unsigned int saa_geo_setup(int, int, int, int, struct planb *); -static inline int overlay_is_active(struct planb *); - -/*******************************/ -/* Memory management functions */ -/*******************************/ - -static int grabbuf_alloc(struct planb *pb) -{ - int i, npage; - - npage = MAX_GBUFFERS * ((PLANB_MAX_FBUF / PAGE_SIZE + 1) -#ifndef PLANB_GSCANLINE - + MAX_LNUM -#endif /* PLANB_GSCANLINE */ - ); - if ((pb->rawbuf = kmalloc(npage - * sizeof(unsigned long), GFP_KERNEL)) == 0) - return -ENOMEM; - for (i = 0; i < npage; i++) { - pb->rawbuf[i] = (unsigned char *)__get_free_pages(GFP_KERNEL - |GFP_DMA, 0); - if (!pb->rawbuf[i]) - break; - SetPageReserved(virt_to_page(pb->rawbuf[i])); - } - if (i-- < npage) { - printk(KERN_DEBUG "PlanB: init_grab: grab buffer not allocated\n"); - for (; i > 0; i--) { - ClearPageReserved(virt_to_page(pb->rawbuf[i])); - free_pages((unsigned long)pb->rawbuf[i], 0); - } - kfree(pb->rawbuf); - return -ENOBUFS; - } - pb->rawbuf_size = npage; - return 0; -} - -/*****************************/ -/* Hardware access functions */ -/*****************************/ - -static void saa_write_reg(unsigned char addr, unsigned char val) -{ - planb_regs->saa_addr = addr; eieio(); - planb_regs->saa_regval = val; eieio(); - return; -} - -/* return status byte 0 or 1: */ -static unsigned char saa_status(int byte, struct planb *pb) -{ - saa_regs[pb->win.norm][SAA7196_STDC] = - (saa_regs[pb->win.norm][SAA7196_STDC] & ~2) | ((byte & 1) << 1); - saa_write_reg (SAA7196_STDC, saa_regs[pb->win.norm][SAA7196_STDC]); - - /* Let's wait 30msec for this one */ - msleep_interruptible(30); - - return (unsigned char)in_8 (&planb_regs->saa_status); -} - -static void saa_set(unsigned char addr, unsigned char val, struct planb *pb) -{ - if(saa_regs[pb->win.norm][addr] != val) { - saa_regs[pb->win.norm][addr] = val; - saa_write_reg (addr, val); - } - return; -} - -static void saa_init_regs(struct planb *pb) -{ - int i; - - for (i = 0; i < SAA7196_NUMREGS; i++) - saa_write_reg (i, saa_regs[pb->win.norm][i]); -} - -static unsigned int saa_geo_setup(int width, int height, int interlace, int bpp, - struct planb *pb) -{ - int ht, norm = pb->win.norm; - - switch(bpp) { - case 2: - /* RGB555+a 1x16-bit + 16-bit transparent */ - saa_regs[norm][SAA7196_FMTS] &= ~0x3; - break; - case 1: - case 4: - /* RGB888 1x24-bit + 8-bit transparent */ - saa_regs[norm][SAA7196_FMTS] &= ~0x1; - saa_regs[norm][SAA7196_FMTS] |= 0x2; - break; - default: - return -EINVAL; - } - ht = (interlace ? height / 2 : height); - saa_regs[norm][SAA7196_OUTPIX] = (unsigned char) (width & 0x00ff); - saa_regs[norm][SAA7196_HFILT] = (saa_regs[norm][SAA7196_HFILT] & ~0x3) - | (width >> 8 & 0x3); - saa_regs[norm][SAA7196_OUTLINE] = (unsigned char) (ht & 0xff); - saa_regs[norm][SAA7196_VYP] = (saa_regs[norm][SAA7196_VYP] & ~0x3) - | (ht >> 8 & 0x3); - /* feed both fields if interlaced, or else feed only even fields */ - saa_regs[norm][SAA7196_FMTS] = (interlace) ? - (saa_regs[norm][SAA7196_FMTS] & ~0x60) - : (saa_regs[norm][SAA7196_FMTS] | 0x60); - /* transparent mode; extended format enabled */ - saa_regs[norm][SAA7196_DPATH] |= 0x3; - - return 0; -} - -/***************************/ -/* DBDMA support functions */ -/***************************/ - -static inline void planb_dbdma_restart(volatile struct dbdma_regs *ch) -{ - out_le32(&ch->control, PLANB_CLR(RUN)); - out_le32(&ch->control, PLANB_SET(RUN|WAKE) | PLANB_CLR(PAUSE)); -} - -static inline void planb_dbdma_stop(volatile struct dbdma_regs *ch) -{ - int i = 0; - - out_le32(&ch->control, PLANB_CLR(RUN) | PLANB_SET(FLUSH)); - while((in_le32(&ch->status) == (ACTIVE | FLUSH)) && (i < 999)) { - IDEBUG("PlanB: waiting for DMA to stop\n"); - i++; - } -} - -static inline void tab_cmd_dbdma(volatile struct dbdma_cmd *ch, - unsigned short command, unsigned int cmd_dep) -{ - st_le16(&ch->command, command); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static inline void tab_cmd_store(volatile struct dbdma_cmd *ch, - unsigned int phy_addr, unsigned int cmd_dep) -{ - st_le16(&ch->command, STORE_WORD | KEY_SYSTEM); - st_le16(&ch->req_count, 4); - st_le32(&ch->phy_addr, phy_addr); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static inline void tab_cmd_gen(volatile struct dbdma_cmd *ch, - unsigned short command, unsigned short req_count, - unsigned int phy_addr, unsigned int cmd_dep) -{ - st_le16(&ch->command, command); - st_le16(&ch->req_count, req_count); - st_le32(&ch->phy_addr, phy_addr); - st_le32(&ch->cmd_dep, cmd_dep); -} - -static volatile struct dbdma_cmd *cmd_geo_setup( - volatile struct dbdma_cmd *c1, int width, int height, int interlace, - int bpp, int clip, struct planb *pb) -{ - int norm = pb->win.norm; - - if((saa_geo_setup(width, height, interlace, bpp, pb)) != 0) - return (volatile struct dbdma_cmd *)NULL; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_FMTS); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_FMTS]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_DPATH); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_DPATH]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->even), - bpp | ((clip)? PLANB_CLIPMASK: 0)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->odd), - bpp | ((clip)? PLANB_CLIPMASK: 0)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_OUTPIX); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_OUTPIX]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_HFILT); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_HFILT]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_OUTLINE); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_OUTLINE]); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_addr), - SAA7196_VYP); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->saa_regval), - saa_regs[norm][SAA7196_VYP]); - return c1; -} - -/******************************/ -/* misc. supporting functions */ -/******************************/ - -static inline void planb_lock(struct planb *pb) -{ - mutex_lock(&pb->lock); -} - -static inline void planb_unlock(struct planb *pb) -{ - mutex_unlock(&pb->lock); -} - -/***************/ -/* Driver Core */ -/***************/ - -static int planb_prepare_open(struct planb *pb) -{ - int i, size; - - /* allocate memory for two plus alpha command buffers (size: max lines, - plus 40 commands handling, plus 1 alignment), plus dummy command buf, - plus clipmask buffer, plus frame grabbing status */ - size = (pb->tab_size*(2+MAX_GBUFFERS*TAB_FACTOR)+1+MAX_GBUFFERS - * PLANB_DUMMY)*sizeof(struct dbdma_cmd) - +(PLANB_MAXLINES*((PLANB_MAXPIXELS+7)& ~7))/8 - +MAX_GBUFFERS*sizeof(unsigned int); - if ((pb->priv_space = kzalloc (size, GFP_KERNEL)) == 0) - return -ENOMEM; - pb->overlay_last1 = pb->ch1_cmd = (volatile struct dbdma_cmd *) - DBDMA_ALIGN (pb->priv_space); - pb->overlay_last2 = pb->ch2_cmd = pb->ch1_cmd + pb->tab_size; - pb->ch1_cmd_phys = virt_to_bus(pb->ch1_cmd); - pb->cap_cmd[0] = pb->ch2_cmd + pb->tab_size; - pb->pre_cmd[0] = pb->cap_cmd[0] + pb->tab_size * TAB_FACTOR; - for (i = 1; i < MAX_GBUFFERS; i++) { - pb->cap_cmd[i] = pb->pre_cmd[i-1] + PLANB_DUMMY; - pb->pre_cmd[i] = pb->cap_cmd[i] + pb->tab_size * TAB_FACTOR; - } - pb->frame_stat=(volatile unsigned int *)(pb->pre_cmd[MAX_GBUFFERS-1] - + PLANB_DUMMY); - pb->mask = (unsigned char *)(pb->frame_stat+MAX_GBUFFERS); - - pb->rawbuf = NULL; - pb->rawbuf_size = 0; - pb->grabbing = 0; - for (i = 0; i < MAX_GBUFFERS; i++) { - pb->frame_stat[i] = GBUFFER_UNUSED; - pb->gwidth[i] = 0; - pb->gheight[i] = 0; - pb->gfmt[i] = 0; - pb->gnorm_switch[i] = 0; -#ifndef PLANB_GSCANLINE - pb->lsize[i] = 0; - pb->lnum[i] = 0; -#endif /* PLANB_GSCANLINE */ - } - pb->gcount = 0; - pb->suspend = 0; - pb->last_fr = -999; - pb->prev_last_fr = -999; - - /* Reset DMA controllers */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - return 0; -} - -static void planb_prepare_close(struct planb *pb) -{ - int i; - - /* make sure the dma's are idle */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - /* free kernel memory of command buffers */ - if(pb->priv_space != 0) { - kfree (pb->priv_space); - pb->priv_space = 0; - pb->cmd_buff_inited = 0; - } - if(pb->rawbuf) { - for (i = 0; i < pb->rawbuf_size; i++) { - ClearPageReserved(virt_to_page(pb->rawbuf[i])); - free_pages((unsigned long)pb->rawbuf[i], 0); - } - kfree(pb->rawbuf); - } - pb->rawbuf = NULL; -} - -/*****************************/ -/* overlay support functions */ -/*****************************/ - -static inline int overlay_is_active(struct planb *pb) -{ - unsigned int size = pb->tab_size * sizeof(struct dbdma_cmd); - unsigned int caddr = (unsigned)in_le32(&pb->planb_base->ch1.cmdptr); - - return (in_le32(&pb->overlay_last1->cmd_dep) == pb->ch1_cmd_phys) - && (caddr < (pb->ch1_cmd_phys + size)) - && (caddr >= (unsigned)pb->ch1_cmd_phys); -} - -static void overlay_start(struct planb *pb) -{ - - DEBUG("PlanB: overlay_start()\n"); - - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - - DEBUG("PlanB: presumably, grabbing is in progress...\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - out_le32 (&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->ch2_cmd)); - planb_dbdma_restart(&pb->planb_base->ch2); - st_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - eieio(); - pb->prev_last_fr = pb->last_fr; - pb->last_fr = -2; - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - IDEBUG("PlanB: became inactive " - "in the mean time... reactivating\n"); - planb_dbdma_stop(&pb->planb_base->ch1); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->ch1_cmd)); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } else { - - DEBUG("PlanB: currently idle, so can do whatever\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - st_le32 (&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->ch2_cmd)); - st_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->ch1_cmd)); - out_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - planb_dbdma_restart(&pb->planb_base->ch2); - planb_dbdma_restart(&pb->planb_base->ch1); - pb->last_fr = -1; - } - return; -} - -static void overlay_stop(struct planb *pb) -{ - DEBUG("PlanB: overlay_stop()\n"); - - if(pb->last_fr == -1) { - - DEBUG("PlanB: no grabbing, it seems...\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->last_fr = -999; - } else if(pb->last_fr == -2) { - unsigned int cmd_dep; - tab_cmd_dbdma(pb->cap_cmd[pb->prev_last_fr], DBDMA_STOP, 0); - eieio(); - cmd_dep = (unsigned int)in_le32(&pb->overlay_last1->cmd_dep); - if(overlay_is_active(pb)) { - - DEBUG("PlanB: overlay is currently active\n"); - - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - if(cmd_dep != pb->ch1_cmd_phys) { - out_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->overlay_last1)); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } - pb->last_fr = pb->prev_last_fr; - pb->prev_last_fr = -999; - } - return; -} - -static void suspend_overlay(struct planb *pb) -{ - int fr = -1; - struct dbdma_cmd last; - - DEBUG("PlanB: suspend_overlay: %d\n", pb->suspend); - - if(pb->suspend++) - return; - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - if(pb->last_fr == -2) { - fr = pb->prev_last_fr; - memcpy(&last, (void*)pb->last_cmd[fr], sizeof(last)); - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - } - if(overlay_is_active(pb)) { - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->suspended.overlay = 1; - pb->suspended.frame = fr; - memcpy(&pb->suspended.cmd, &last, sizeof(last)); - return; - } - } - pb->suspended.overlay = 0; - pb->suspended.frame = fr; - memcpy(&pb->suspended.cmd, &last, sizeof(last)); - return; -} - -static void resume_overlay(struct planb *pb) -{ - - DEBUG("PlanB: resume_overlay: %d\n", pb->suspend); - - if(pb->suspend > 1) - return; - if(pb->suspended.frame != -1) { - memcpy((void*)pb->last_cmd[pb->suspended.frame], - &pb->suspended.cmd, sizeof(pb->suspended.cmd)); - } - if(ACTIVE & in_le32(&pb->planb_base->ch1.status)) { - goto finish; - } - if(pb->suspended.overlay) { - - DEBUG("PlanB: overlay being resumed\n"); - - st_le16 (&pb->ch1_cmd->command, DBDMA_NOP); - st_le16 (&pb->ch2_cmd->command, DBDMA_NOP); - /* Set command buffer addresses */ - st_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->overlay_last1)); - out_le32(&pb->planb_base->ch2.cmdptr, - virt_to_bus(pb->overlay_last2)); - /* Start the DMA controller */ - out_le32 (&pb->planb_base->ch2.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - out_le32 (&pb->planb_base->ch1.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - } else if(pb->suspended.frame != -1) { - out_le32(&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->last_cmd[pb->suspended.frame])); - out_le32 (&pb->planb_base->ch1.control, - PLANB_CLR(PAUSE) | PLANB_SET(RUN|WAKE)); - } - -finish: - pb->suspend--; - wake_up_interruptible(&pb->suspendq); -} - -static void add_clip(struct planb *pb, struct video_clip *clip) -{ - volatile unsigned char *base; - int xc = clip->x, yc = clip->y; - int wc = clip->width, hc = clip->height; - int ww = pb->win.width, hw = pb->win.height; - int x, y, xtmp1, xtmp2; - - DEBUG("PlanB: clip %dx%d+%d+%d\n", wc, hc, xc, yc); - - if(xc < 0) { - wc += xc; - xc = 0; - } - if(yc < 0) { - hc += yc; - yc = 0; - } - if(xc + wc > ww) - wc = ww - xc; - if(wc <= 0) /* Nothing to do */ - return; - if(yc + hc > hw) - hc = hw - yc; - - for (y = yc; y < yc+hc; y++) { - xtmp1=xc>>3; - xtmp2=(xc+wc)>>3; - base = pb->mask + y*96; - if(xc != 0 || wc >= 8) - *(base + xtmp1) &= (unsigned char)(0x00ff & - (0xff00 >> (xc&7))); - for (x = xtmp1 + 1; x < xtmp2; x++) { - *(base + x) = 0; - } - if(xc < (ww & ~0x7)) - *(base + xtmp2) &= (unsigned char)(0x00ff >> - ((xc+wc) & 7)); - } - - return; -} - -static void fill_cmd_buff(struct planb *pb) -{ - int restore = 0; - volatile struct dbdma_cmd last; - - DEBUG("PlanB: fill_cmd_buff()\n"); - - if(pb->overlay_last1 != pb->ch1_cmd) { - restore = 1; - last = *(pb->overlay_last1); - } - memset ((void *) pb->ch1_cmd, 0, 2 * pb->tab_size - * sizeof(struct dbdma_cmd)); - cmd_buff (pb); - if(restore) - *(pb->overlay_last1) = last; - if(pb->suspended.overlay) { - unsigned long jump_addr = in_le32(&pb->overlay_last1->cmd_dep); - if(jump_addr != pb->ch1_cmd_phys) { - int i; - - DEBUG("PlanB: adjusting ch1's jump address\n"); - - for(i = 0; i < MAX_GBUFFERS; i++) { - if(pb->need_pre_capture[i]) { - if(jump_addr == virt_to_bus(pb->pre_cmd[i])) - goto found; - } else { - if(jump_addr == virt_to_bus(pb->cap_cmd[i])) - goto found; - } - } - - DEBUG("PlanB: not found...\n"); - - goto out; -found: - if(pb->need_pre_capture[i]) - out_le32(&pb->pre_cmd[i]->phy_addr, - virt_to_bus(pb->overlay_last1)); - else - out_le32(&pb->cap_cmd[i]->phy_addr, - virt_to_bus(pb->overlay_last1)); - } - } -out: - pb->cmd_buff_inited = 1; - - return; -} - -static void cmd_buff(struct planb *pb) -{ - int i, bpp, count, nlines, stepsize, interlace; - unsigned long base, jump, addr_com, addr_dep; - volatile struct dbdma_cmd *c1 = pb->ch1_cmd; - volatile struct dbdma_cmd *c2 = pb->ch2_cmd; - - interlace = pb->win.interlace; - bpp = pb->win.bpp; - count = (bpp * ((pb->win.x + pb->win.width > pb->win.swidth) ? - (pb->win.swidth - pb->win.x) : pb->win.width)); - nlines = ((pb->win.y + pb->win.height > pb->win.sheight) ? - (pb->win.sheight - pb->win.y) : pb->win.height); - - /* Do video in: */ - - /* Preamble commands: */ - addr_com = virt_to_bus(c1); - addr_dep = virt_to_bus(&c1->cmd_dep); - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - jump = virt_to_bus(c1+16); /* 14 by cmd_geo_setup() and 2 for padding */ - if((c1 = cmd_geo_setup(c1, pb->win.width, pb->win.height, interlace, - bpp, 1, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered serious problems\n"); - tab_cmd_dbdma(pb->ch1_cmd + 1, DBDMA_STOP, 0); - tab_cmd_dbdma(pb->ch2_cmd + 1, DBDMA_STOP, 0); - return; - } - tab_cmd_store(c1++, addr_com, (unsigned)(DBDMA_NOP | BR_ALWAYS) << 16); - tab_cmd_store(c1++, addr_dep, jump); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - /* (1) wait for field sync to be set */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - /* wait for field sync to be cleared */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - /* if not odd field, wait until field sync is set again */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - /* assert ch_sync to ch2 */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_SET(CH_SYNC)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - base = (pb->frame_buffer_phys + pb->offset + pb->win.y * (pb->win.bpl - + pb->win.pad) + pb->win.x * bpp); - - if (interlace) { - stepsize = 2; - jump = virt_to_bus(c1 + (nlines + 1) / 2); - } else { - stepsize = 1; - jump = virt_to_bus(c1 + nlines); - } - - /* even field data: */ - for (i=0; i < nlines; i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, - count, base + i * (pb->win.bpl + pb->win.pad), jump); - - /* For non-interlaced, we use even fields only */ - if (!interlace) - goto cmd_tab_data_end; - - /* Resync to odd field */ - /* (2) wait for field sync to be set */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - /* wait for field sync to be cleared */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - /* if not odd field, wait until field sync is set again */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - /* assert ch_sync to ch2 */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_SET(CH_SYNC)); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - /* odd field data: */ - jump = virt_to_bus(c1 + nlines / 2); - for (i=1; i < nlines; i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + i * (pb->win.bpl + pb->win.pad), jump); - - /* And jump back to the start */ -cmd_tab_data_end: - pb->overlay_last1 = c1; /* keep a pointer to the last command */ - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch1_cmd)); - - /* Clipmask command buffer */ - - /* Preamble commands: */ - tab_cmd_dbdma(c2++, DBDMA_NOP, 0); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel), - PLANB_SET(CH_SYNC)); - /* wait until ch1 asserts ch_sync */ - tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0); - /* clear ch_sync asserted by ch1 */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.control), - PLANB_CLR(CH_SYNC)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(ODD_FIELD)); - - /* jump to end of even field if appropriate */ - /* this points to (interlace)? pos. C: pos. B */ - jump = (interlace) ? virt_to_bus(c2 + (nlines + 1) / 2 + 2): - virt_to_bus(c2 + nlines + 2); - /* if odd field, skip over to odd field clipmasking */ - tab_cmd_dbdma(c2++, DBDMA_NOP | BR_IFSET, jump); - - /* even field mask: */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(DMA_ABORT)); - /* this points to pos. B */ - jump = (interlace) ? virt_to_bus(c2 + nlines + 1): - virt_to_bus(c2 + nlines); - base = virt_to_bus(pb->mask); - for (i=0; i < nlines; i += stepsize, c2++) - tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96, - base + i * 96, jump); - - /* For non-interlaced, we use only even fields */ - if(!interlace) - goto cmd_tab_mask_end; - - /* odd field mask: */ -/* C */ tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch2.br_sel), - PLANB_SET(DMA_ABORT)); - /* this points to pos. B */ - jump = virt_to_bus(c2 + nlines / 2); - base = virt_to_bus(pb->mask); - for (i=1; i < nlines; i += 2, c2++) /* abort if set */ - tab_cmd_gen(c2, OUTPUT_MORE | KEY_STREAM0 | BR_IFSET, 96, - base + i * 96, jump); - - /* Inform channel 1 and jump back to start */ -cmd_tab_mask_end: - /* ok, I just realized this is kind of flawed. */ - /* this part is reached only after odd field clipmasking. */ - /* wanna clean up? */ - /* wait for field sync to be set */ - /* corresponds to fsync (1) of ch1 */ -/* B */ tab_cmd_dbdma(c2++, DBDMA_NOP | WAIT_IFCLR, 0); - /* restart ch1, meant to clear any dead bit or something */ - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control), - PLANB_CLR(RUN)); - tab_cmd_store(c2++, (unsigned)(&pb->planb_base_phys->ch1.control), - PLANB_SET(RUN)); - pb->overlay_last2 = c2; /* keep a pointer to the last command */ - /* start over even field clipmasking */ - tab_cmd_dbdma(c2, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->ch2_cmd)); - - eieio(); - return; -} - -/*********************************/ -/* grabdisplay support functions */ -/*********************************/ - -static int palette2fmt[] = { - 0, - PLANB_GRAY, - 0, - 0, - 0, - PLANB_COLOUR32, - PLANB_COLOUR15, - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 0, -}; - -#define PLANB_PALETTE_MAX 15 - -static int vgrab(struct planb *pb, struct video_mmap *mp) -{ - unsigned int fr = mp->frame; - unsigned int format; - - if(pb->rawbuf==NULL) { - int err; - if((err=grabbuf_alloc(pb))) - return err; - } - - IDEBUG("PlanB: grab %d: %dx%d(%u)\n", pb->grabbing, - mp->width, mp->height, fr); - - if(pb->grabbing >= MAX_GBUFFERS) - return -ENOBUFS; - if(fr > (MAX_GBUFFERS - 1) || fr < 0) - return -EINVAL; - if(mp->height <= 0 || mp->width <= 0) - return -EINVAL; - if(mp->format < 0 || mp->format >= PLANB_PALETTE_MAX) - return -EINVAL; - if((format = palette2fmt[mp->format]) == 0) - return -EINVAL; - if (mp->height * mp->width * format > PLANB_MAX_FBUF) /* format = bpp */ - return -EINVAL; - - planb_lock(pb); - if(mp->width != pb->gwidth[fr] || mp->height != pb->gheight[fr] || - format != pb->gfmt[fr] || (pb->gnorm_switch[fr])) { - int i; -#ifndef PLANB_GSCANLINE - unsigned int osize = pb->gwidth[fr] * pb->gheight[fr] - * pb->gfmt[fr]; - unsigned int nsize = mp->width * mp->height * format; -#endif - - IDEBUG("PlanB: gwidth = %d, gheight = %d, mp->format = %u\n", - mp->width, mp->height, mp->format); - -#ifndef PLANB_GSCANLINE - if(pb->gnorm_switch[fr]) - nsize = 0; - if (nsize < osize) { - for(i = pb->gbuf_idx[fr]; osize > 0; i++) { - memset((void *)pb->rawbuf[i], 0, PAGE_SIZE); - osize -= PAGE_SIZE; - } - } - for(i = pb->l_fr_addr_idx[fr]; i < pb->l_fr_addr_idx[fr] - + pb->lnum[fr]; i++) - memset((void *)pb->rawbuf[i], 0, PAGE_SIZE); -#else -/* XXX TODO */ -/* - if(pb->gnorm_switch[fr]) - memset((void *)pb->gbuffer[fr], 0, - pb->gbytes_per_line * pb->gheight[fr]); - else { - if(mp-> - for(i = 0; i < pb->gheight[fr]; i++) { - memset((void *)(pb->gbuffer[fr] - + pb->gbytes_per_line * i - } - } -*/ -#endif - pb->gwidth[fr] = mp->width; - pb->gheight[fr] = mp->height; - pb->gfmt[fr] = format; - pb->last_cmd[fr] = setup_grab_cmd(fr, pb); - planb_pre_capture(fr, pb->gfmt[fr], pb); /* gfmt = bpp */ - pb->need_pre_capture[fr] = 1; - pb->gnorm_switch[fr] = 0; - } else - pb->need_pre_capture[fr] = 0; - pb->frame_stat[fr] = GBUFFER_GRABBING; - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - - IDEBUG("PlanB: ch1 inactive, initiating grabbing\n"); - - planb_dbdma_stop(&pb->planb_base->ch1); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->pre_cmd[fr])); - } else { - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - /* let's be on the safe side. here is not timing critical. */ - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), DBDMA_NOP, 0); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->cap_cmd[fr])); - } - planb_dbdma_restart(&pb->planb_base->ch1); - pb->last_fr = fr; - } else { - int i; - - IDEBUG("PlanB: ch1 active, grabbing being queued\n"); - - if((pb->last_fr == -1) || ((pb->last_fr == -2) && - overlay_is_active(pb))) { - - IDEBUG("PlanB: overlay is active, grabbing defered\n"); - - tab_cmd_dbdma(pb->last_cmd[fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_store(pb->pre_cmd[fr], - virt_to_bus(&pb->overlay_last1->cmd_dep), - virt_to_bus(pb->ch1_cmd)); - eieio(); - out_le32 (&pb->overlay_last1->cmd_dep, - virt_to_bus(pb->pre_cmd[fr])); - } else { - tab_cmd_store(pb->cap_cmd[fr], - virt_to_bus(&pb->overlay_last1->cmd_dep), - virt_to_bus(pb->ch1_cmd)); - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - eieio(); - out_le32 (&pb->overlay_last1->cmd_dep, - virt_to_bus(pb->cap_cmd[fr])); - } - for(i = 0; overlay_is_active(pb) && i < 999; i++) - IDEBUG("PlanB: waiting for overlay done\n"); - tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0); - pb->prev_last_fr = fr; - pb->last_fr = -2; - } else if(pb->last_fr == -2) { - - IDEBUG("PlanB: mixed mode detected, grabbing" - " will be done before activating overlay\n"); - - tab_cmd_dbdma(pb->ch1_cmd, DBDMA_NOP, 0); - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->pre_cmd[fr])); - eieio(); - } else { - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - if(pb->gwidth[pb->prev_last_fr] != - pb->gwidth[fr] - || pb->gheight[pb->prev_last_fr] != - pb->gheight[fr] - || pb->gfmt[pb->prev_last_fr] != - pb->gfmt[fr]) - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - else - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr] + 16)); - tab_cmd_dbdma(pb->last_cmd[pb->prev_last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr])); - eieio(); - } - tab_cmd_dbdma(pb->last_cmd[fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->ch1_cmd)); - eieio(); - pb->prev_last_fr = fr; - pb->last_fr = -2; - } else { - - IDEBUG("PlanB: active grabbing session detected\n"); - - if(pb->need_pre_capture[fr]) { - - IDEBUG("PlanB: padding pre-capture sequence\n"); - - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->pre_cmd[fr])); - eieio(); - } else { - tab_cmd_dbdma(pb->last_cmd[fr], DBDMA_STOP, 0); - tab_cmd_dbdma(pb->cap_cmd[fr], DBDMA_NOP, 0); - if(pb->gwidth[pb->last_fr] != pb->gwidth[fr] - || pb->gheight[pb->last_fr] != - pb->gheight[fr] - || pb->gfmt[pb->last_fr] != - pb->gfmt[fr]) - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP, 0); - else - tab_cmd_dbdma((pb->cap_cmd[fr] + 1), - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr] + 16)); - tab_cmd_dbdma(pb->last_cmd[pb->last_fr], - DBDMA_NOP | BR_ALWAYS, - virt_to_bus(pb->cap_cmd[fr])); - eieio(); - } - pb->last_fr = fr; - } - if(!(ACTIVE & in_le32(&pb->planb_base->ch1.status))) { - - IDEBUG("PlanB: became inactive in the mean time..." - "reactivating\n"); - - planb_dbdma_stop(&pb->planb_base->ch1); - out_le32 (&pb->planb_base->ch1.cmdptr, - virt_to_bus(pb->cap_cmd[fr])); - planb_dbdma_restart(&pb->planb_base->ch1); - } - } - pb->grabbing++; - planb_unlock(pb); - - return 0; -} - -static void planb_pre_capture(int fr, int bpp, struct planb *pb) -{ - volatile struct dbdma_cmd *c1 = pb->pre_cmd[fr]; - int interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0; - - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace, - bpp, 0, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered some problems\n"); - tab_cmd_dbdma(pb->pre_cmd[fr] + 1, DBDMA_STOP, 0); - return; - } - /* Sync to even field */ - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - /* For non-interlaced, we use even fields only */ - if (pb->gheight[fr] <= pb->maxlines/2) - goto cmd_tab_data_end; - /* Sync to odd field */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); -cmd_tab_data_end: - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(pb->cap_cmd[fr])); - - eieio(); -} - -static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb) -{ - int i, bpp, count, nlines, stepsize, interlace; -#ifdef PLANB_GSCANLINE - int scanline; -#else - int nlpp, leftover1; - unsigned long base; -#endif - unsigned long jump; - int pagei; - volatile struct dbdma_cmd *c1; - volatile struct dbdma_cmd *jump_addr; - - c1 = pb->cap_cmd[fr]; - interlace = (pb->gheight[fr] > pb->maxlines/2)? 1: 0; - bpp = pb->gfmt[fr]; /* gfmt = bpp */ - count = bpp * pb->gwidth[fr]; - nlines = pb->gheight[fr]; -#ifdef PLANB_GSCANLINE - scanline = pb->gbytes_per_line; -#else - pb->lsize[fr] = count; - pb->lnum[fr] = 0; -#endif - - /* Do video in: */ - - /* Preamble commands: */ - tab_cmd_dbdma(c1++, DBDMA_NOP, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, virt_to_bus(c1 + 16)); c1++; - if((c1 = cmd_geo_setup(c1, pb->gwidth[fr], pb->gheight[fr], interlace, - bpp, 0, pb)) == NULL) { - printk(KERN_WARNING "PlanB: encountered serious problems\n"); - tab_cmd_dbdma(pb->cap_cmd[fr] + 1, DBDMA_STOP, 0); - return (pb->cap_cmd[fr] + 2); - } - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.wait_sel), - PLANB_SET(FIELD_SYNC)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFSET, virt_to_bus(c1-3)); c1++; - tab_cmd_dbdma(c1++, DBDMA_NOP | INTR_ALWAYS, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - if (interlace) { - stepsize = 2; - jump_addr = c1 + TAB_FACTOR * (nlines + 1) / 2; - } else { - stepsize = 1; - jump_addr = c1 + TAB_FACTOR * nlines; - } - jump = virt_to_bus(jump_addr); - - /* even field data: */ - - pagei = pb->gbuf_idx[fr]; -#ifdef PLANB_GSCANLINE - for (i = 0; i < nlines; i += stepsize) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pagei - + i * scanline / PAGE_SIZE]), jump); - } -#else - i = 0; - leftover1 = 0; - do { - int j; - - base = virt_to_bus(pb->rawbuf[pagei]); - nlpp = (PAGE_SIZE - leftover1) / count / stepsize; - for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, - count, base + count * j * stepsize + leftover1, jump); - if(i < nlines) { - int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1; - - if(lov0 == 0) - leftover1 = 0; - else { - if(lov0 >= count) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, base - + count * nlpp * stepsize + leftover1, jump); - } else { - pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei] - + count * nlpp * stepsize + leftover1; - pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1; - pb->l_to_next_size[fr][pb->lnum[fr]] = count - lov0; - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr] - + pb->lnum[fr]]), jump); - if(++pb->lnum[fr] > MAX_LNUM) - pb->lnum[fr]--; - } - leftover1 = count * stepsize - lov0; - i += stepsize; - } - } - pagei++; - } while(i < nlines); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump); - c1 = jump_addr; -#endif /* PLANB_GSCANLINE */ - - /* For non-interlaced, we use even fields only */ - if (!interlace) - goto cmd_tab_data_end; - - /* Sync to odd field */ - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFCLR, 0); - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(ODD_FIELD)); - tab_cmd_dbdma(c1++, DBDMA_NOP | WAIT_IFSET, 0); - tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), - PLANB_SET(DMA_ABORT)); - - /* odd field data: */ - jump_addr = c1 + TAB_FACTOR * nlines / 2; - jump = virt_to_bus(jump_addr); -#ifdef PLANB_GSCANLINE - for (i = 1; i < nlines; i += stepsize) { - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pagei - + i * scanline / PAGE_SIZE]), jump); - } -#else - i = 1; - leftover1 = 0; - pagei = pb->gbuf_idx[fr]; - if(nlines <= 1) - goto skip; - do { - int j; - - base = virt_to_bus(pb->rawbuf[pagei]); - nlpp = (PAGE_SIZE - leftover1) / count / stepsize; - if(leftover1 >= count) { - tab_cmd_gen(c1++, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + leftover1 - count, jump); - i += stepsize; - } - for(j = 0; j < nlpp && i < nlines; j++, i += stepsize, c1++) - tab_cmd_gen(c1, INPUT_MORE | KEY_STREAM0 | BR_IFSET, count, - base + count * (j * stepsize + 1) + leftover1, jump); - if(i < nlines) { - int lov0 = PAGE_SIZE - count * nlpp * stepsize - leftover1; - - if(lov0 == 0) - leftover1 = 0; - else { - if(lov0 > count) { - pb->l_to_addr[fr][pb->lnum[fr]] = pb->rawbuf[pagei] - + count * (nlpp * stepsize + 1) + leftover1; - pb->l_to_next_idx[fr][pb->lnum[fr]] = pagei + 1; - pb->l_to_next_size[fr][pb->lnum[fr]] = count * stepsize - - lov0; - tab_cmd_gen(c1++, INPUT_MORE | BR_IFSET, count, - virt_to_bus(pb->rawbuf[pb->l_fr_addr_idx[fr] - + pb->lnum[fr]]), jump); - if(++pb->lnum[fr] > MAX_LNUM) - pb->lnum[fr]--; - i += stepsize; - } - leftover1 = count * stepsize - lov0; - } - } - pagei++; - } while(i < nlines); -skip: - tab_cmd_dbdma(c1, DBDMA_NOP | BR_ALWAYS, jump); - c1 = jump_addr; -#endif /* PLANB_GSCANLINE */ - -cmd_tab_data_end: - tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->intr_stat), - (fr << 9) | PLANB_FRM_IRQ | PLANB_GEN_IRQ); - /* stop it */ - tab_cmd_dbdma(c1, DBDMA_STOP, 0); - - eieio(); - return c1; -} - -static irqreturn_t planb_irq(int irq, void *dev_id) -{ - unsigned int stat, astat; - struct planb *pb = (struct planb *)dev_id; - - IDEBUG("PlanB: planb_irq()\n"); - - /* get/clear interrupt status bits */ - eieio(); - stat = in_le32(&pb->planb_base->intr_stat); - astat = stat & pb->intr_mask; - out_le32(&pb->planb_base->intr_stat, PLANB_FRM_IRQ - & ~astat & stat & ~PLANB_GEN_IRQ); - IDEBUG("PlanB: stat = %X, astat = %X\n", stat, astat); - - if(astat & PLANB_FRM_IRQ) { - unsigned int fr = stat >> 9; -#ifndef PLANB_GSCANLINE - int i; -#endif - IDEBUG("PlanB: PLANB_FRM_IRQ\n"); - - pb->gcount++; - - IDEBUG("PlanB: grab %d: fr = %d, gcount = %d\n", - pb->grabbing, fr, pb->gcount); -#ifndef PLANB_GSCANLINE - IDEBUG("PlanB: %d * %d bytes are being copied over\n", - pb->lnum[fr], pb->lsize[fr]); - for(i = 0; i < pb->lnum[fr]; i++) { - int first = pb->lsize[fr] - pb->l_to_next_size[fr][i]; - - memcpy(pb->l_to_addr[fr][i], - pb->rawbuf[pb->l_fr_addr_idx[fr] + i], - first); - memcpy(pb->rawbuf[pb->l_to_next_idx[fr][i]], - pb->rawbuf[pb->l_fr_addr_idx[fr] + i] + first, - pb->l_to_next_size[fr][i]); - } -#endif - pb->frame_stat[fr] = GBUFFER_DONE; - pb->grabbing--; - wake_up_interruptible(&pb->capq); - return IRQ_HANDLED; - } - /* incorrect interrupts? */ - pb->intr_mask = PLANB_CLR_IRQ; - out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - printk(KERN_ERR "PlanB: IRQ lockup, cleared intrrupts" - " unconditionally\n"); - return IRQ_HANDLED; -} - -/******************************* - * Device Operations functions * - *******************************/ - -static int planb_open(struct video_device *dev, int mode) -{ - struct planb *pb = (struct planb *)dev; - - if (pb->user == 0) { - int err; - if((err = planb_prepare_open(pb)) != 0) - return err; - } - pb->user++; - - DEBUG("PlanB: device opened\n"); - return 0; -} - -static void planb_close(struct video_device *dev) -{ - struct planb *pb = (struct planb *)dev; - - if(pb->user < 1) /* ??? */ - return; - planb_lock(pb); - if (pb->user == 1) { - if (pb->overlay) { - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - pb->overlay = 0; - } - planb_prepare_close(pb); - } - pb->user--; - planb_unlock(pb); - - DEBUG("PlanB: device closed\n"); -} - -static long planb_read(struct video_device *v, char *buf, unsigned long count, - int nonblock) -{ - DEBUG("planb: read request\n"); - return -EINVAL; -} - -static long planb_write(struct video_device *v, const char *buf, - unsigned long count, int nonblock) -{ - DEBUG("planb: write request\n"); - return -EINVAL; -} - -static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - struct planb *pb=(struct planb *)dev; - - switch (cmd) - { - case VIDIOCGCAP: - { - struct video_capability b; - - DEBUG("PlanB: IOCTL VIDIOCGCAP\n"); - - strcpy (b.name, pb->video_dev.name); - b.type = VID_TYPE_OVERLAY | VID_TYPE_CLIPPING | - VID_TYPE_FRAMERAM | VID_TYPE_SCALES | - VID_TYPE_CAPTURE; - b.channels = 2; /* composite & svhs */ - b.audios = 0; - b.maxwidth = PLANB_MAXPIXELS; - b.maxheight = PLANB_MAXLINES; - b.minwidth = 32; /* wild guess */ - b.minheight = 32; - if (copy_to_user(arg,&b,sizeof(b))) - return -EFAULT; - return 0; - } - case VIDIOCSFBUF: - { - struct video_buffer v; - unsigned short bpp; - unsigned int fmt; - - DEBUG("PlanB: IOCTL VIDIOCSFBUF\n"); - - if (!capable(CAP_SYS_ADMIN) - || !capable(CAP_SYS_RAWIO)) - return -EPERM; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - planb_lock(pb); - switch(v.depth) { - case 8: - bpp = 1; - fmt = PLANB_GRAY; - break; - case 15: - case 16: - bpp = 2; - fmt = PLANB_COLOUR15; - break; - case 24: - case 32: - bpp = 4; - fmt = PLANB_COLOUR32; - break; - default: - planb_unlock(pb); - return -EINVAL; - } - if (bpp * v.width > v.bytesperline) { - planb_unlock(pb); - return -EINVAL; - } - pb->win.bpp = bpp; - pb->win.color_fmt = fmt; - pb->frame_buffer_phys = (unsigned long) v.base; - pb->win.sheight = v.height; - pb->win.swidth = v.width; - pb->picture.depth = pb->win.depth = v.depth; - pb->win.bpl = pb->win.bpp * pb->win.swidth; - pb->win.pad = v.bytesperline - pb->win.bpl; - - DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d," - " bpl %d (+ %d)\n", v.base, v.width,v.height, - pb->win.bpp, pb->win.bpl, pb->win.pad); - - pb->cmd_buff_inited = 0; - if(pb->overlay) { - suspend_overlay(pb); - fill_cmd_buff(pb); - resume_overlay(pb); - } - planb_unlock(pb); - return 0; - } - case VIDIOCGFBUF: - { - struct video_buffer v; - - DEBUG("PlanB: IOCTL VIDIOCGFBUF\n"); - - v.base = (void *)pb->frame_buffer_phys; - v.height = pb->win.sheight; - v.width = pb->win.swidth; - v.depth = pb->win.depth; - v.bytesperline = pb->win.bpl + pb->win.pad; - if (copy_to_user(arg, &v, sizeof(v))) - return -EFAULT; - return 0; - } - case VIDIOCCAPTURE: - { - int i; - - if(copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; - if(i==0) { - DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n"); - - if (!(pb->overlay)) - return 0; - planb_lock(pb); - pb->overlay = 0; - overlay_stop(pb); - planb_unlock(pb); - } else { - DEBUG("PlanB: IOCTL VIDIOCCAPTURE Start\n"); - - if (pb->frame_buffer_phys == 0 || - pb->win.width == 0 || - pb->win.height == 0) - return -EINVAL; - if (pb->overlay) - return 0; - planb_lock(pb); - pb->overlay = 1; - if(!(pb->cmd_buff_inited)) - fill_cmd_buff(pb); - overlay_start(pb); - planb_unlock(pb); - } - return 0; - } - case VIDIOCGCHAN: - { - struct video_channel v; - - DEBUG("PlanB: IOCTL VIDIOCGCHAN\n"); - - if(copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - v.flags = 0; - v.tuners = 0; - v.type = VIDEO_TYPE_CAMERA; - v.norm = pb->win.norm; - switch(v.channel) - { - case 0: - strcpy(v.name,"Composite"); - break; - case 1: - strcpy(v.name,"SVHS"); - break; - default: - return -EINVAL; - break; - } - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - - return 0; - } - case VIDIOCSCHAN: - { - struct video_channel v; - - DEBUG("PlanB: IOCTL VIDIOCSCHAN\n"); - - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - - if (v.norm != pb->win.norm) { - int i, maxlines; - - switch (v.norm) - { - case VIDEO_MODE_PAL: - case VIDEO_MODE_SECAM: - maxlines = PLANB_MAXLINES; - break; - case VIDEO_MODE_NTSC: - maxlines = PLANB_NTSC_MAXLINES; - break; - default: - return -EINVAL; - break; - } - planb_lock(pb); - /* empty the grabbing queue */ - wait_event(pb->capq, !pb->grabbing); - pb->maxlines = maxlines; - pb->win.norm = v.norm; - /* Stop overlay if running */ - suspend_overlay(pb); - for(i = 0; i < MAX_GBUFFERS; i++) - pb->gnorm_switch[i] = 1; - /* I know it's an overkill, but.... */ - fill_cmd_buff(pb); - /* ok, now init it accordingly */ - saa_init_regs (pb); - /* restart overlay if it was running */ - resume_overlay(pb); - planb_unlock(pb); - } - - switch(v.channel) - { - case 0: /* Composite */ - saa_set (SAA7196_IOCC, - ((saa_regs[pb->win.norm][SAA7196_IOCC] & - ~7) | 3), pb); - break; - case 1: /* SVHS */ - saa_set (SAA7196_IOCC, - ((saa_regs[pb->win.norm][SAA7196_IOCC] & - ~7) | 4), pb); - break; - default: - return -EINVAL; - break; - } - - return 0; - } - case VIDIOCGPICT: - { - struct video_picture vp = pb->picture; - - DEBUG("PlanB: IOCTL VIDIOCGPICT\n"); - - switch(pb->win.color_fmt) { - case PLANB_GRAY: - vp.palette = VIDEO_PALETTE_GREY; - case PLANB_COLOUR15: - vp.palette = VIDEO_PALETTE_RGB555; - break; - case PLANB_COLOUR32: - vp.palette = VIDEO_PALETTE_RGB32; - break; - default: - vp.palette = 0; - break; - } - - if(copy_to_user(arg,&vp,sizeof(vp))) - return -EFAULT; - return 0; - } - case VIDIOCSPICT: - { - struct video_picture vp; - - DEBUG("PlanB: IOCTL VIDIOCSPICT\n"); - - if(copy_from_user(&vp,arg,sizeof(vp))) - return -EFAULT; - pb->picture = vp; - /* Should we do sanity checks here? */ - saa_set (SAA7196_BRIG, (unsigned char) - ((pb->picture.brightness) >> 8), pb); - saa_set (SAA7196_HUEC, (unsigned char) - ((pb->picture.hue) >> 8) ^ 0x80, pb); - saa_set (SAA7196_CSAT, (unsigned char) - ((pb->picture.colour) >> 9), pb); - saa_set (SAA7196_CONT, (unsigned char) - ((pb->picture.contrast) >> 9), pb); - - return 0; - } - case VIDIOCSWIN: - { - struct video_window vw; - struct video_clip clip; - int i; - - DEBUG("PlanB: IOCTL VIDIOCSWIN\n"); - - if(copy_from_user(&vw,arg,sizeof(vw))) - return -EFAULT; - - planb_lock(pb); - /* Stop overlay if running */ - suspend_overlay(pb); - pb->win.interlace = (vw.height > pb->maxlines/2)? 1: 0; - if (pb->win.x != vw.x || - pb->win.y != vw.y || - pb->win.width != vw.width || - pb->win.height != vw.height || - !pb->cmd_buff_inited) { - pb->win.x = vw.x; - pb->win.y = vw.y; - pb->win.width = vw.width; - pb->win.height = vw.height; - fill_cmd_buff(pb); - } - /* Reset clip mask */ - memset ((void *) pb->mask, 0xff, (pb->maxlines - * ((PLANB_MAXPIXELS + 7) & ~7)) / 8); - /* Add any clip rects */ - for (i = 0; i < vw.clipcount; i++) { - if (copy_from_user(&clip, vw.clips + i, - sizeof(struct video_clip))) - return -EFAULT; - add_clip(pb, &clip); - } - /* restart overlay if it was running */ - resume_overlay(pb); - planb_unlock(pb); - return 0; - } - case VIDIOCGWIN: - { - struct video_window vw; - - DEBUG("PlanB: IOCTL VIDIOCGWIN\n"); - - vw.x=pb->win.x; - vw.y=pb->win.y; - vw.width=pb->win.width; - vw.height=pb->win.height; - vw.chromakey=0; - vw.flags=0; - if(pb->win.interlace) - vw.flags|=VIDEO_WINDOW_INTERLACE; - if(copy_to_user(arg,&vw,sizeof(vw))) - return -EFAULT; - return 0; - } - case VIDIOCSYNC: { - int i; - - IDEBUG("PlanB: IOCTL VIDIOCSYNC\n"); - - if(copy_from_user((void *)&i,arg,sizeof(int))) - return -EFAULT; - - IDEBUG("PlanB: sync to frame %d\n", i); - - if(i > (MAX_GBUFFERS - 1) || i < 0) - return -EINVAL; -chk_grab: - switch (pb->frame_stat[i]) { - case GBUFFER_UNUSED: - return -EINVAL; - case GBUFFER_GRABBING: - IDEBUG("PlanB: waiting for grab" - " done (%d)\n", i); - interruptible_sleep_on(&pb->capq); - if(signal_pending(current)) - return -EINTR; - goto chk_grab; - case GBUFFER_DONE: - pb->frame_stat[i] = GBUFFER_UNUSED; - break; - } - return 0; - } - - case VIDIOCMCAPTURE: - { - struct video_mmap vm; - volatile unsigned int status; - - IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n"); - - if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm))) - return -EFAULT; - status = pb->frame_stat[vm.frame]; - if (status != GBUFFER_UNUSED) - return -EBUSY; - - return vgrab(pb, &vm); - } - - case VIDIOCGMBUF: - { - int i; - struct video_mbuf vm; - - DEBUG("PlanB: IOCTL VIDIOCGMBUF\n"); - - memset(&vm, 0 , sizeof(vm)); - vm.size = PLANB_MAX_FBUF * MAX_GBUFFERS; - vm.frames = MAX_GBUFFERS; - for(i = 0; i<MAX_GBUFFERS; i++) - vm.offsets[i] = PLANB_MAX_FBUF * i; - if(copy_to_user((void *)arg, (void *)&vm, sizeof(vm))) - return -EFAULT; - return 0; - } - - case PLANBIOCGSAAREGS: - { - struct planb_saa_regs preg; - - DEBUG("PlanB: IOCTL PLANBIOCGSAAREGS\n"); - - if(copy_from_user(&preg, arg, sizeof(preg))) - return -EFAULT; - if(preg.addr >= SAA7196_NUMREGS) - return -EINVAL; - preg.val = saa_regs[pb->win.norm][preg.addr]; - if(copy_to_user((void *)arg, (void *)&preg, - sizeof(preg))) - return -EFAULT; - return 0; - } - - case PLANBIOCSSAAREGS: - { - struct planb_saa_regs preg; - - DEBUG("PlanB: IOCTL PLANBIOCSSAAREGS\n"); - - if(copy_from_user(&preg, arg, sizeof(preg))) - return -EFAULT; - if(preg.addr >= SAA7196_NUMREGS) - return -EINVAL; - saa_set (preg.addr, preg.val, pb); - return 0; - } - - case PLANBIOCGSTAT: - { - struct planb_stat_regs pstat; - - DEBUG("PlanB: IOCTL PLANBIOCGSTAT\n"); - - pstat.ch1_stat = in_le32(&pb->planb_base->ch1.status); - pstat.ch2_stat = in_le32(&pb->planb_base->ch2.status); - pstat.saa_stat0 = saa_status(0, pb); - pstat.saa_stat1 = saa_status(1, pb); - - if(copy_to_user((void *)arg, (void *)&pstat, - sizeof(pstat))) - return -EFAULT; - return 0; - } - - case PLANBIOCSMODE: { - int v; - - DEBUG("PlanB: IOCTL PLANBIOCSMODE\n"); - - if(copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - - switch(v) - { - case PLANB_TV_MODE: - saa_set (SAA7196_STDC, - (saa_regs[pb->win.norm][SAA7196_STDC] & - 0x7f), pb); - break; - case PLANB_VTR_MODE: - saa_set (SAA7196_STDC, - (saa_regs[pb->win.norm][SAA7196_STDC] | - 0x80), pb); - break; - default: - return -EINVAL; - break; - } - pb->win.mode = v; - return 0; - } - case PLANBIOCGMODE: { - int v=pb->win.mode; - - DEBUG("PlanB: IOCTL PLANBIOCGMODE\n"); - - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - return 0; - } -#ifdef PLANB_GSCANLINE - case PLANBG_GRAB_BPL: { - int v=pb->gbytes_per_line; - - DEBUG("PlanB: IOCTL PLANBG_GRAB_BPL\n"); - - if(copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - return 0; - } -#endif /* PLANB_GSCANLINE */ - case PLANB_INTR_DEBUG: { - int i; - - DEBUG("PlanB: IOCTL PLANB_INTR_DEBUG\n"); - - if(copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; - - /* avoid hang ups all together */ - for (i = 0; i < MAX_GBUFFERS; i++) { - if(pb->frame_stat[i] == GBUFFER_GRABBING) { - pb->frame_stat[i] = GBUFFER_DONE; - } - } - if(pb->grabbing) - pb->grabbing--; - wake_up_interruptible(&pb->capq); - return 0; - } - case PLANB_INV_REGS: { - int i; - struct planb_any_regs any; - - DEBUG("PlanB: IOCTL PLANB_INV_REGS\n"); - - if(copy_from_user(&any, arg, sizeof(any))) - return -EFAULT; - if(any.offset < 0 || any.offset + any.bytes > 0x400) - return -EINVAL; - if(any.bytes > 128) - return -EINVAL; - for (i = 0; i < any.bytes; i++) { - any.data[i] = - in_8((unsigned char *)pb->planb_base - + any.offset + i); - } - if(copy_to_user(arg,&any,sizeof(any))) - return -EFAULT; - return 0; - } - default: - { - DEBUG("PlanB: Unimplemented IOCTL\n"); - return -ENOIOCTLCMD; - } - /* Some IOCTLs are currently unsupported on PlanB */ - case VIDIOCGTUNER: { - DEBUG("PlanB: IOCTL VIDIOCGTUNER\n"); - goto unimplemented; } - case VIDIOCSTUNER: { - DEBUG("PlanB: IOCTL VIDIOCSTUNER\n"); - goto unimplemented; } - case VIDIOCSFREQ: { - DEBUG("PlanB: IOCTL VIDIOCSFREQ\n"); - goto unimplemented; } - case VIDIOCGFREQ: { - DEBUG("PlanB: IOCTL VIDIOCGFREQ\n"); - goto unimplemented; } - case VIDIOCKEY: { - DEBUG("PlanB: IOCTL VIDIOCKEY\n"); - goto unimplemented; } - case VIDIOCSAUDIO: { - DEBUG("PlanB: IOCTL VIDIOCSAUDIO\n"); - goto unimplemented; } - case VIDIOCGAUDIO: { - DEBUG("PlanB: IOCTL VIDIOCGAUDIO\n"); - goto unimplemented; } -unimplemented: - DEBUG(" Unimplemented\n"); - return -ENOIOCTLCMD; - } - return 0; -} - -static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, const char *adr, unsigned long size) -{ - int i; - struct planb *pb = (struct planb *)dev; - unsigned long start = (unsigned long)adr; - - if (size > MAX_GBUFFERS * PLANB_MAX_FBUF) - return -EINVAL; - if (!pb->rawbuf) { - int err; - if((err=grabbuf_alloc(pb))) - return err; - } - for (i = 0; i < pb->rawbuf_size; i++) { - unsigned long pfn; - - pfn = virt_to_phys((void *)pb->rawbuf[i]) >> PAGE_SHIFT; - if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - if (size <= PAGE_SIZE) - break; - size -= PAGE_SIZE; - } - return 0; -} - -static struct video_device planb_template= -{ - .owner = THIS_MODULE, - .name = PLANB_DEVICE_NAME, - .type = VID_TYPE_OVERLAY, - .open = planb_open, - .close = planb_close, - .read = planb_read, - .write = planb_write, - .ioctl = planb_ioctl, - .mmap = planb_mmap, /* mmap? */ -}; - -static int init_planb(struct planb *pb) -{ - unsigned char saa_rev; - int i, result; - - memset ((void *) &pb->win, 0, sizeof (struct planb_window)); - /* Simple sanity check */ - if(def_norm >= NUM_SUPPORTED_NORM || def_norm < 0) { - printk(KERN_ERR "PlanB: Option(s) invalid\n"); - return -2; - } - pb->win.norm = def_norm; - pb->win.mode = PLANB_TV_MODE; /* TV mode */ - pb->win.interlace=1; - pb->win.x=0; - pb->win.y=0; - pb->win.width=768; /* 640 */ - pb->win.height=576; /* 480 */ - pb->maxlines=576; -#if 0 - btv->win.cropwidth=768; /* 640 */ - btv->win.cropheight=576; /* 480 */ - btv->win.cropx=0; - btv->win.cropy=0; -#endif - pb->win.pad=0; - pb->win.bpp=4; - pb->win.depth=32; - pb->win.color_fmt=PLANB_COLOUR32; - pb->win.bpl=1024*pb->win.bpp; - pb->win.swidth=1024; - pb->win.sheight=768; -#ifdef PLANB_GSCANLINE - if((pb->gbytes_per_line = PLANB_MAXPIXELS * 4) > PAGE_SIZE - || (pb->gbytes_per_line <= 0)) - return -3; - else { - /* page align pb->gbytes_per_line for DMA purpose */ - for(i = PAGE_SIZE; pb->gbytes_per_line < (i>>1);) - i>>=1; - pb->gbytes_per_line = i; - } -#endif - pb->tab_size = PLANB_MAXLINES + 40; - pb->suspend = 0; - mutex_init(&pb->lock); - pb->ch1_cmd = 0; - pb->ch2_cmd = 0; - pb->mask = 0; - pb->priv_space = 0; - pb->offset = 0; - pb->user = 0; - pb->overlay = 0; - init_waitqueue_head(&pb->suspendq); - pb->cmd_buff_inited = 0; - pb->frame_buffer_phys = 0; - - /* Reset DMA controllers */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - saa_rev = (saa_status(0, pb) & 0xf0) >> 4; - printk(KERN_INFO "PlanB: SAA7196 video processor rev. %d\n", saa_rev); - /* Initialize the SAA registers in memory and on chip */ - saa_init_regs (pb); - - /* clear interrupt mask */ - pb->intr_mask = PLANB_CLR_IRQ; - - result = request_irq(pb->irq, planb_irq, 0, "PlanB", pb); - if (result < 0) { - if (result==-EINVAL) - printk(KERN_ERR "PlanB: Bad irq number (%d) " - "or handler\n", (int)pb->irq); - else if (result==-EBUSY) - printk(KERN_ERR "PlanB: I don't know why, " - "but IRQ %d is busy\n", (int)pb->irq); - return result; - } - disable_irq(pb->irq); - - /* Now add the template and register the device unit. */ - memcpy(&pb->video_dev,&planb_template,sizeof(planb_template)); - - pb->picture.brightness=0x90<<8; - pb->picture.contrast = 0x70 << 8; - pb->picture.colour = 0x70<<8; - pb->picture.hue = 0x8000; - pb->picture.whiteness = 0; - pb->picture.depth = pb->win.depth; - - pb->frame_stat=NULL; - init_waitqueue_head(&pb->capq); - for(i=0; i<MAX_GBUFFERS; i++) { - pb->gbuf_idx[i] = PLANB_MAX_FBUF * i / PAGE_SIZE; - pb->gwidth[i]=0; - pb->gheight[i]=0; - pb->gfmt[i]=0; - pb->cap_cmd[i]=NULL; -#ifndef PLANB_GSCANLINE - pb->l_fr_addr_idx[i] = MAX_GBUFFERS * (PLANB_MAX_FBUF - / PAGE_SIZE + 1) + MAX_LNUM * i; - pb->lsize[i] = 0; - pb->lnum[i] = 0; -#endif - } - pb->rawbuf=NULL; - pb->grabbing=0; - - /* enable interrupts */ - out_le32(&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - pb->intr_mask = PLANB_FRM_IRQ; - enable_irq(pb->irq); - - if(video_register_device(&pb->video_dev, VFL_TYPE_GRABBER, video_nr)<0) - return -1; - - return 0; -} - -/* - * Scan for a PlanB controller, request the irq and map the io memory - */ - -static int find_planb(void) -{ - struct planb *pb; - struct device_node *planb_devices; - unsigned char dev_fn, confreg, bus; - unsigned int old_base, new_base; - unsigned int irq; - struct pci_dev *pdev; - int rc; - - if (!machine_is(powermac)) - return 0; - - planb_devices = of_find_node_by_name(NULL, "planb"); - if (planb_devices == 0) { - planb_num=0; - printk(KERN_WARNING "PlanB: no device found!\n"); - return planb_num; - } - - if (planb_devices->next != NULL) - printk(KERN_ERR "Warning: only using first PlanB device!\n"); - pb = &planbs[0]; - planb_num = 1; - - if (planb_devices->n_addrs != 1) { - printk (KERN_WARNING "PlanB: expecting 1 address for planb " - "(got %d)", planb_devices->n_addrs); - of_node_put(planb_devices); - return 0; - } - - if (planb_devices->n_intrs == 0) { - printk(KERN_WARNING "PlanB: no intrs for device %s\n", - planb_devices->full_name); - of_node_put(planb_devices); - return 0; - } else { - irq = planb_devices->intrs[0].line; - } - - /* Initialize PlanB's PCI registers */ - - /* There is a bug with the way OF assigns addresses - to the devices behind the chaos bridge. - control needs only 0x1000 of space, but decodes only - the upper 16 bits. It therefore occupies a full 64K. - OF assigns the planb controller memory within this space; - so we need to change that here in order to access planb. */ - - /* We remap to 0xf1000000 in hope that nobody uses it ! */ - - bus = (planb_devices->addrs[0].space >> 16) & 0xff; - dev_fn = (planb_devices->addrs[0].space >> 8) & 0xff; - confreg = planb_devices->addrs[0].space & 0xff; - old_base = planb_devices->addrs[0].address; - new_base = 0xf1000000; - of_node_put(planb_devices); - - DEBUG("PlanB: Found on bus %d, dev %d, func %d, " - "membase 0x%x (base reg. 0x%x)\n", - bus, PCI_SLOT(dev_fn), PCI_FUNC(dev_fn), old_base, confreg); - - pdev = pci_get_bus_and_slot(bus, dev_fn); - if (!pdev) { - printk(KERN_ERR "planb: cannot find slot\n"); - goto err_out; - } - - /* Enable response in memory space, bus mastering, - use memory write and invalidate */ - rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR "planb: cannot enable PCI device %s\n", - pci_name(pdev)); - goto err_out; - } - rc = pci_set_mwi(pdev); - if (rc) { - printk(KERN_ERR "planb: cannot enable MWI on PCI device %s\n", - pci_name(pdev)); - goto err_out_disable; - } - pci_set_master(pdev); - - /* Set the new base address */ - pci_write_config_dword (pdev, confreg, new_base); - - planb_regs = (volatile struct planb_registers *) - ioremap (new_base, 0x400); - pb->planb_base = planb_regs; - pb->planb_base_phys = (struct planb_registers *)new_base; - pb->irq = irq; - pb->dev = pdev; - - return planb_num; - -err_out_disable: - pci_disable_device(pdev); -err_out: - /* FIXME handle error */ /* comment moved from pci_find_slot, above */ - pci_dev_put(pdev); - return 0; -} - -static void release_planb(void) -{ - int i; - struct planb *pb; - - for (i=0;i<planb_num; i++) - { - pb=&planbs[i]; - - /* stop and flash DMAs unconditionally */ - planb_dbdma_stop(&pb->planb_base->ch2); - planb_dbdma_stop(&pb->planb_base->ch1); - - /* clear and free interrupts */ - pb->intr_mask = PLANB_CLR_IRQ; - out_le32 (&pb->planb_base->intr_stat, PLANB_CLR_IRQ); - free_irq(pb->irq, pb); - - /* make sure all allocated memory are freed */ - planb_prepare_close(pb); - - printk(KERN_INFO "PlanB: unregistering with v4l\n"); - video_unregister_device(&pb->video_dev); - - pci_dev_put(pb->dev); - - /* note that iounmap() does nothing on the PPC right now */ - iounmap ((void *)pb->planb_base); - } -} - -static int __init init_planbs(void) -{ - int i; - - if (find_planb()<=0) - return -EIO; - - for (i=0; i<planb_num; i++) { - if (init_planb(&planbs[i])<0) { - printk(KERN_ERR "PlanB: error registering device %d" - " with v4l\n", i); - release_planb(); - return -EIO; - } - printk(KERN_INFO "PlanB: registered device %d with v4l\n", i); - } - return 0; -} - -static void __exit exit_planbs(void) -{ - release_planb(); -} - -module_init(init_planbs); -module_exit(exit_planbs); |