diff options
Diffstat (limited to 'drivers/media/video')
185 files changed, 36101 insertions, 6373 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index aa021600e9df..4498b944dec8 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -42,8 +42,30 @@ config VIDEO_TUNER config V4L2_MEM2MEM_DEV tristate - depends on VIDEOBUF_GEN + depends on VIDEOBUF2_CORE +config VIDEOBUF2_CORE + tristate + +config VIDEOBUF2_MEMOPS + tristate + +config VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + tristate + +config VIDEOBUF2_VMALLOC + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + tristate + + +config VIDEOBUF2_DMA_SG + #depends on HAS_DMA + select VIDEOBUF2_CORE + select VIDEOBUF2_MEMOPS + tristate # # Multimedia Video device configuration # @@ -527,7 +549,7 @@ config VIDEO_VIVI depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE select FONT_8x16 - select VIDEOBUF_VMALLOC + select VIDEOBUF2_VMALLOC default n ---help--- Enables a virtual video driver. This device shows a color bar @@ -718,10 +740,30 @@ config VIDEO_VIA_CAMERA Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems with ov7670 sensors. +config VIDEO_NOON010PC30 + tristate "NOON010PC30 CIF camera sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This driver supports NOON010PC30 CIF camera from Siliconfile + +config VIDEO_OMAP3 + tristate "OMAP 3 Camera support (EXPERIMENTAL)" + select OMAP_IOMMU + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL + ---help--- + Driver for an OMAP 3 camera controller. + +config VIDEO_OMAP3_DEBUG + bool "OMAP 3 Camera debug messages" + depends on VIDEO_OMAP3 + ---help--- + Enable debug messages on OMAP 3 camera controller driver. + config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C select VIDEOBUF_GEN + select VIDEOBUF2_CORE help SoC Camera is a common API to several cameras, not connecting over a bus like PCI or USB. For example some i2c camera connected @@ -809,6 +851,12 @@ config SOC_CAMERA_OV9640 help This is a ov9640 camera driver +config SOC_CAMERA_OV9740 + tristate "ov9740 camera support" + depends on SOC_CAMERA && I2C + help + This is a ov9740 camera driver + config MX1_VIDEO bool @@ -848,7 +896,7 @@ config VIDEO_SH_MOBILE_CSI2 config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG ---help--- This is a v4l2 driver for the SuperH Mobile CEU Interface @@ -967,7 +1015,7 @@ if V4L_MEM2MEM_DRIVERS config VIDEO_MEM2MEM_TESTDEV tristate "Virtual test device for mem2mem framework" depends on VIDEO_DEV && VIDEO_V4L2 - select VIDEOBUF_VMALLOC + select VIDEOBUF2_VMALLOC select V4L2_MEM2MEM_DEV default n ---help--- @@ -977,7 +1025,7 @@ config VIDEO_MEM2MEM_TESTDEV config VIDEO_SAMSUNG_S5P_FIMC tristate "Samsung S5P FIMC (video postprocessor) driver" depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV help This is a v4l2 driver for the S5P camera interface diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index a509d317e258..ace5d8b57221 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -11,7 +11,7 @@ stkwebcam-objs := stk-webcam.o stk-sensor.o omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ - v4l2-event.o v4l2-ctrls.o + v4l2-event.o v4l2-ctrls.o v4l2-subdev.o # V4L2 core modules @@ -67,6 +67,7 @@ obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o +obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o @@ -78,6 +79,7 @@ obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o +obj-$(CONFIG_SOC_CAMERA_OV9740) += ov9740.o obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o @@ -111,6 +113,12 @@ obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o +obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o +obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o +obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o +obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o +obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o + obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o @@ -121,6 +129,8 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o +obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/ + obj-$(CONFIG_USB_ZR364XX) += zr364xx.o obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c index 41b2930d0ce4..021fab23070d 100644 --- a/drivers/media/video/adv7343.c +++ b/drivers/media/video/adv7343.c @@ -29,6 +29,7 @@ #include <media/adv7343.h> #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> #include "adv7343_regs.h" @@ -41,15 +42,13 @@ MODULE_PARM_DESC(debug, "Debug level 0-1"); struct adv7343_state { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; u8 reg00; u8 reg01; u8 reg02; u8 reg35; u8 reg80; u8 reg82; - int bright; - int hue; - int gain; u32 output; v4l2_std_id std; }; @@ -59,6 +58,11 @@ static inline struct adv7343_state *to_state(struct v4l2_subdev *sd) return container_of(sd, struct adv7343_state, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct adv7343_state, hdl)->sd; +} + static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -268,111 +272,22 @@ static int adv7343_log_status(struct v4l2_subdev *sd) return 0; } -static int adv7343_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, ADV7343_BRIGHTNESS_MIN, - ADV7343_BRIGHTNESS_MAX, 1, - ADV7343_BRIGHTNESS_DEF); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, ADV7343_HUE_MIN, - ADV7343_HUE_MAX, 1 , - ADV7343_HUE_DEF); - case V4L2_CID_GAIN: - return v4l2_ctrl_query_fill(qc, ADV7343_GAIN_MIN, - ADV7343_GAIN_MAX, 1, - ADV7343_GAIN_DEF); - default: - break; - } - - return 0; -} - -static int adv7343_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct adv7343_state *state = to_state(sd); - int err = 0; - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - if (ctrl->value < ADV7343_BRIGHTNESS_MIN || - ctrl->value > ADV7343_BRIGHTNESS_MAX) { - v4l2_dbg(1, debug, sd, - "invalid brightness settings %d\n", - ctrl->value); - return -ERANGE; - } - - state->bright = ctrl->value; - err = adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS, - state->bright); - break; - - case V4L2_CID_HUE: - if (ctrl->value < ADV7343_HUE_MIN || - ctrl->value > ADV7343_HUE_MAX) { - v4l2_dbg(1, debug, sd, "invalid hue settings %d\n", - ctrl->value); - return -ERANGE; - } - - state->hue = ctrl->value; - err = adv7343_write(sd, ADV7343_SD_HUE_REG, state->hue); - break; - - case V4L2_CID_GAIN: - if (ctrl->value < ADV7343_GAIN_MIN || - ctrl->value > ADV7343_GAIN_MAX) { - v4l2_dbg(1, debug, sd, "invalid gain settings %d\n", - ctrl->value); - return -ERANGE; - } - - if ((ctrl->value > POSITIVE_GAIN_MAX) && - (ctrl->value < NEGATIVE_GAIN_MIN)) { - v4l2_dbg(1, debug, sd, - "gain settings not within the specified range\n"); - return -ERANGE; - } - - state->gain = ctrl->value; - err = adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, state->gain); - break; - - default: - return -EINVAL; - } - - if (err < 0) - v4l2_err(sd, "Failed to set the encoder controls\n"); - - return err; -} - -static int adv7343_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int adv7343_s_ctrl(struct v4l2_ctrl *ctrl) { - struct adv7343_state *state = to_state(sd); + struct v4l2_subdev *sd = to_sd(ctrl); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ctrl->value = state->bright; - break; + return adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS, + ctrl->val); case V4L2_CID_HUE: - ctrl->value = state->hue; - break; + return adv7343_write(sd, ADV7343_SD_HUE_REG, ctrl->val); case V4L2_CID_GAIN: - ctrl->value = state->gain; - break; - - default: - return -EINVAL; + return adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, ctrl->val); } - - return 0; + return -EINVAL; } static int adv7343_g_chip_ident(struct v4l2_subdev *sd, @@ -383,12 +298,20 @@ static int adv7343_g_chip_ident(struct v4l2_subdev *sd, return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0); } +static const struct v4l2_ctrl_ops adv7343_ctrl_ops = { + .s_ctrl = adv7343_s_ctrl, +}; + static const struct v4l2_subdev_core_ops adv7343_core_ops = { - .log_status = adv7343_log_status, - .g_chip_ident = adv7343_g_chip_ident, - .g_ctrl = adv7343_g_ctrl, - .s_ctrl = adv7343_s_ctrl, - .queryctrl = adv7343_queryctrl, + .log_status = adv7343_log_status, + .g_chip_ident = adv7343_g_chip_ident, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, }; static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) @@ -468,6 +391,7 @@ static int adv7343_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adv7343_state *state; + int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; @@ -490,15 +414,46 @@ static int adv7343_probe(struct i2c_client *client, state->std = V4L2_STD_NTSC; v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops); - return adv7343_initialize(&state->sd); + + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_BRIGHTNESS, ADV7343_BRIGHTNESS_MIN, + ADV7343_BRIGHTNESS_MAX, 1, + ADV7343_BRIGHTNESS_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_HUE, ADV7343_HUE_MIN, + ADV7343_HUE_MAX, 1, + ADV7343_HUE_DEF); + v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops, + V4L2_CID_GAIN, ADV7343_GAIN_MIN, + ADV7343_GAIN_MAX, 1, + ADV7343_GAIN_DEF); + state->sd.ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); + + err = adv7343_initialize(&state->sd); + if (err) { + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + } + return err; } static int adv7343_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct adv7343_state *state = to_state(sd); v4l2_device_unregister_subdev(sd); - kfree(to_state(sd)); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); return 0; } diff --git a/drivers/media/video/adv7343_regs.h b/drivers/media/video/adv7343_regs.h index 3431045b33da..446606764346 100644 --- a/drivers/media/video/adv7343_regs.h +++ b/drivers/media/video/adv7343_regs.h @@ -102,10 +102,6 @@ struct adv7343_std_info { /* Bit masks for DAC output levels */ #define DAC_OUTPUT_LEVEL_MASK (0xFF) -#define POSITIVE_GAIN_MAX (0x40) -#define POSITIVE_GAIN_MIN (0x00) -#define NEGATIVE_GAIN_MAX (0xFF) -#define NEGATIVE_GAIN_MIN (0xC0) /* Bit masks for soft reset register */ #define SOFT_RESET (0x02) @@ -178,8 +174,8 @@ struct adv7343_std_info { #define ADV7343_HUE_MAX (255) #define ADV7343_HUE_MIN (0) #define ADV7343_HUE_DEF (127) -#define ADV7343_GAIN_MAX (255) -#define ADV7343_GAIN_MIN (0) +#define ADV7343_GAIN_MAX (64) +#define ADV7343_GAIN_MIN (-64) #define ADV7343_GAIN_DEF (0) #endif diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 01be89fa5c78..39fc923fc46b 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -185,8 +185,7 @@ void au0828_card_setup(struct au0828_dev *dev) static u8 eeprom[256]; struct tuner_setup tun_setup; struct v4l2_subdev *sd; - unsigned int mode_mask = T_ANALOG_TV | - T_DIGITAL_TV; + unsigned int mode_mask = T_ANALOG_TV; dprintk(1, "%s()\n", __func__); diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index f1edf1d4afe8..518216743c9c 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -96,7 +96,6 @@ static struct tda18271_config hauppauge_woodbury_tunerconfig = { /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { - u8 *ptr; struct au0828_dev *dev = purb->context; int ptype = usb_pipetype(purb->pipe); @@ -114,8 +113,6 @@ static void urb_completion(struct urb *purb) return; } - ptr = (u8 *)purb->transfer_buffer; - /* Feed the transport payload into the kernel demux */ dvb_dmx_swfilter_packets(&dev->dvb.demux, purb->transfer_buffer, purb->actual_length / 188); diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c index 9c475c600fc9..6ad83a15d073 100644 --- a/drivers/media/video/au0828/au0828-video.c +++ b/drivers/media/video/au0828/au0828-video.c @@ -1177,10 +1177,6 @@ static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, int ret; int width = format->fmt.pix.width; int height = format->fmt.pix.height; - unsigned int maxwidth, maxheight; - - maxwidth = 720; - maxheight = 480; if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index c38300fc0b1d..f87204461cb4 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -37,6 +37,7 @@ #include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> #include <media/bt819.h> MODULE_DESCRIPTION("Brooktree-819 video decoder driver"); @@ -52,16 +53,13 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct bt819 { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; unsigned char reg[32]; v4l2_std_id norm; int ident; int input; int enable; - int bright; - int contrast; - int hue; - int sat; }; static inline struct bt819 *to_bt819(struct v4l2_subdev *sd) @@ -69,6 +67,11 @@ static inline struct bt819 *to_bt819(struct v4l2_subdev *sd) return container_of(sd, struct bt819, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct bt819, hdl)->sd; +} + struct timing { int hactive; int hdelay; @@ -333,71 +336,35 @@ static int bt819_s_stream(struct v4l2_subdev *sd, int enable) return 0; } -static int bt819_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - break; - - case V4L2_CID_CONTRAST: - v4l2_ctrl_query_fill(qc, 0, 511, 1, 256); - break; - - case V4L2_CID_SATURATION: - v4l2_ctrl_query_fill(qc, 0, 511, 1, 256); - break; - - case V4L2_CID_HUE: - v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - break; - - default: - return -EINVAL; - } - return 0; -} - -static int bt819_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int bt819_s_ctrl(struct v4l2_ctrl *ctrl) { + struct v4l2_subdev *sd = to_sd(ctrl); struct bt819 *decoder = to_bt819(sd); int temp; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - if (decoder->bright == ctrl->value) - break; - decoder->bright = ctrl->value; - bt819_write(decoder, 0x0a, decoder->bright); + bt819_write(decoder, 0x0a, ctrl->val); break; case V4L2_CID_CONTRAST: - if (decoder->contrast == ctrl->value) - break; - decoder->contrast = ctrl->value; - bt819_write(decoder, 0x0c, decoder->contrast & 0xff); - bt819_setbit(decoder, 0x0b, 2, ((decoder->contrast >> 8) & 0x01)); + bt819_write(decoder, 0x0c, ctrl->val & 0xff); + bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01)); break; case V4L2_CID_SATURATION: - if (decoder->sat == ctrl->value) - break; - decoder->sat = ctrl->value; - bt819_write(decoder, 0x0d, (decoder->sat >> 7) & 0xff); - bt819_setbit(decoder, 0x0b, 1, ((decoder->sat >> 15) & 0x01)); + bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff); + bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01)); /* Ratio between U gain and V gain must stay the same as the ratio between the default U and V gain values. */ - temp = (decoder->sat * 180) / 254; + temp = (ctrl->val * 180) / 254; bt819_write(decoder, 0x0e, (temp >> 7) & 0xff); bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01); break; case V4L2_CID_HUE: - if (decoder->hue == ctrl->value) - break; - decoder->hue = ctrl->value; - bt819_write(decoder, 0x0f, decoder->hue); + bt819_write(decoder, 0x0f, ctrl->val); break; default: @@ -406,29 +373,6 @@ static int bt819_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return 0; } -static int bt819_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct bt819 *decoder = to_bt819(sd); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = decoder->bright; - break; - case V4L2_CID_CONTRAST: - ctrl->value = decoder->contrast; - break; - case V4L2_CID_SATURATION: - ctrl->value = decoder->sat; - break; - case V4L2_CID_HUE: - ctrl->value = decoder->hue; - break; - default: - return -EINVAL; - } - return 0; -} - static int bt819_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) { struct bt819 *decoder = to_bt819(sd); @@ -439,11 +383,19 @@ static int bt819_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops bt819_ctrl_ops = { + .s_ctrl = bt819_s_ctrl, +}; + static const struct v4l2_subdev_core_ops bt819_core_ops = { .g_chip_ident = bt819_g_chip_ident, - .g_ctrl = bt819_g_ctrl, - .s_ctrl = bt819_s_ctrl, - .queryctrl = bt819_queryctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = bt819_s_std, }; @@ -505,23 +457,40 @@ static int bt819_probe(struct i2c_client *client, decoder->norm = V4L2_STD_NTSC; decoder->input = 0; decoder->enable = 1; - decoder->bright = 0; - decoder->contrast = 0xd8; /* 100% of original signal */ - decoder->hue = 0; - decoder->sat = 0xfe; /* 100% of original signal */ i = bt819_init(sd); if (i < 0) v4l2_dbg(1, debug, sd, "init status %d\n", i); + + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_CONTRAST, 0, 511, 1, 0xd8); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_SATURATION, 0, 511, 1, 0xfe); + v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); return 0; } static int bt819_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct bt819 *decoder = to_bt819(sd); v4l2_device_unregister_subdev(sd); - kfree(to_bt819(sd)); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); return 0; } diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 7f58756d72c8..242f0d512238 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3616,7 +3616,7 @@ void __devinit bttv_init_tuner(struct bttv *btv) &btv->c.i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); - tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.mode_mask = T_ANALOG_TV; tun_setup.type = btv->tuner_type; tun_setup.addr = addr; diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index e8b64bca9db2..677d70c0e1ce 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -193,12 +193,10 @@ static void bttv_rc5_timer_end(unsigned long data) { struct bttv_ir *ir = (struct bttv_ir *)data; struct timeval tv; - unsigned long current_jiffies; u32 gap; u32 rc5 = 0; /* get time */ - current_jiffies = jiffies; do_gettimeofday(&tv); /* avoid overflow with gap >1s */ diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index aaffca8e13fd..ee91e295c90a 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -519,22 +519,16 @@ int cpia2_do_command(struct camera_data *cam, * cpia2_send_command * *****************************************************************************/ + +#define DIR(cmd) ((cmd->direction == TRANSFER_WRITE) ? "Write" : "Read") +#define BINDEX(cmd) (cmd->req_mode & 0x03) + int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) { u8 count; u8 start; - u8 block_index; u8 *buffer; int retval; - const char* dir; - - if (cmd->direction == TRANSFER_WRITE) { - dir = "Write"; - } else { - dir = "Read"; - } - - block_index = cmd->req_mode & 0x03; switch (cmd->req_mode & 0x0c) { case CAMERAACCESS_TYPE_RANDOM: @@ -542,32 +536,32 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) start = 0; buffer = (u8 *) & cmd->buffer; if (debugs_on & DEBUG_REG) - DBG("%s Random: Register block %s\n", dir, - block_name[block_index]); + DBG("%s Random: Register block %s\n", DIR(cmd), + block_name[BINDEX(cmd)]); break; case CAMERAACCESS_TYPE_BLOCK: count = cmd->reg_count; start = cmd->start; buffer = cmd->buffer.block_data; if (debugs_on & DEBUG_REG) - DBG("%s Block: Register block %s\n", dir, - block_name[block_index]); + DBG("%s Block: Register block %s\n", DIR(cmd), + block_name[BINDEX(cmd)]); break; case CAMERAACCESS_TYPE_MASK: count = cmd->reg_count * sizeof(struct cpia2_reg_mask); start = 0; buffer = (u8 *) & cmd->buffer; if (debugs_on & DEBUG_REG) - DBG("%s Mask: Register block %s\n", dir, - block_name[block_index]); + DBG("%s Mask: Register block %s\n", DIR(cmd), + block_name[BINDEX(cmd)]); break; case CAMERAACCESS_TYPE_REPEAT: /* For patch blocks only */ count = cmd->reg_count; start = cmd->start; buffer = cmd->buffer.block_data; if (debugs_on & DEBUG_REG) - DBG("%s Repeat: Register block %s\n", dir, - block_name[block_index]); + DBG("%s Repeat: Register block %s\n", DIR(cmd), + block_name[BINDEX(cmd)]); break; default: LOG("%s: invalid request mode\n",__func__); @@ -584,10 +578,10 @@ int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) for (i = 0; i < cmd->reg_count; i++) { if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_BLOCK) KINFO("%s Block: [0x%02X] = 0x%02X\n", - dir, start + i, buffer[i]); + DIR(cmd), start + i, buffer[i]); if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_RANDOM) KINFO("%s Random: [0x%02X] = 0x%02X\n", - dir, cmd->buffer.registers[i].index, + DIR(cmd), cmd->buffer.registers[i].index, cmd->buffer.registers[i].value); } } diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 9bad39842936..5111bbcefad5 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -395,10 +395,15 @@ static int sync(struct camera_data *cam, int frame_nr) * *****************************************************************************/ -static int ioctl_set_gpio(void *arg, struct camera_data *cam) +static long cpia2_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) { + struct camera_data *cam = video_drvdata(file); __u32 gpio_val; + if (cmd != CPIA2_CID_GPIO) + return -EINVAL; + gpio_val = *(__u32*) arg; if (gpio_val &~ 0xFFU) @@ -415,11 +420,10 @@ static int ioctl_set_gpio(void *arg, struct camera_data *cam) * *****************************************************************************/ -static int ioctl_querycap(void *arg, struct camera_data *cam) +static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *vc) { - struct v4l2_capability *vc = arg; + struct camera_data *cam = video_drvdata(file); - memset(vc, 0, sizeof(*vc)); strcpy(vc->driver, "cpia2"); if (cam->params.pnp_id.product == 0x151) @@ -479,22 +483,26 @@ static int ioctl_querycap(void *arg, struct camera_data *cam) * *****************************************************************************/ -static int ioctl_input(unsigned int ioclt_nr,void *arg,struct camera_data *cam) +static int cpia2_enum_input(struct file *file, void *fh, struct v4l2_input *i) { - struct v4l2_input *i = arg; - - if(ioclt_nr != VIDIOC_G_INPUT) { - if (i->index != 0) - return -EINVAL; - } - - memset(i, 0, sizeof(*i)); + if (i->index) + return -EINVAL; strcpy(i->name, "Camera"); i->type = V4L2_INPUT_TYPE_CAMERA; + return 0; +} +static int cpia2_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; return 0; } +static int cpia2_s_input(struct file *file, void *fh, unsigned int i) +{ + return i ? -EINVAL : 0; +} + /****************************************************************************** * * ioctl_enum_fmt @@ -503,9 +511,9 @@ static int ioctl_input(unsigned int ioclt_nr,void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_enum_fmt(void *arg,struct camera_data *cam) +static int cpia2_enum_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_fmtdesc *f) { - struct v4l2_fmtdesc *f = arg; int index = f->index; if (index < 0 || index > 1) @@ -539,12 +547,10 @@ static int ioctl_enum_fmt(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_try_fmt(void *arg,struct camera_data *cam) +static int cpia2_try_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) { - struct v4l2_format *f = arg; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; + struct camera_data *cam = video_drvdata(file); if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG && f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) @@ -603,12 +609,17 @@ static int ioctl_try_fmt(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_set_fmt(void *arg,struct camera_data *cam, struct cpia2_fh *fh) +static int cpia2_s_fmt_vid_cap(struct file *file, void *_fh, + struct v4l2_format *f) { - struct v4l2_format *f = arg; + struct camera_data *cam = video_drvdata(file); + struct cpia2_fh *fh = _fh; int err, frame; - err = ioctl_try_fmt(arg, cam); + err = v4l2_prio_check(&cam->prio, fh->prio); + if (err) + return err; + err = cpia2_try_fmt_vid_cap(file, _fh, f); if(err != 0) return err; @@ -658,12 +669,10 @@ static int ioctl_set_fmt(void *arg,struct camera_data *cam, struct cpia2_fh *fh) * *****************************************************************************/ -static int ioctl_get_fmt(void *arg,struct camera_data *cam) +static int cpia2_g_fmt_vid_cap(struct file *file, void *fh, + struct v4l2_format *f) { - struct v4l2_format *f = arg; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; + struct camera_data *cam = video_drvdata(file); f->fmt.pix.width = cam->width; f->fmt.pix.height = cam->height; @@ -686,9 +695,9 @@ static int ioctl_get_fmt(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_cropcap(void *arg,struct camera_data *cam) +static int cpia2_cropcap(struct file *file, void *fh, struct v4l2_cropcap *c) { - struct v4l2_cropcap *c = arg; + struct camera_data *cam = video_drvdata(file); if (c->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -715,9 +724,9 @@ static int ioctl_cropcap(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_queryctrl(void *arg,struct camera_data *cam) +static int cpia2_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *c) { - struct v4l2_queryctrl *c = arg; + struct camera_data *cam = video_drvdata(file); int i; for(i=0; i<NUM_CONTROLS; ++i) { @@ -783,12 +792,9 @@ static int ioctl_queryctrl(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_querymenu(void *arg,struct camera_data *cam) +static int cpia2_querymenu(struct file *file, void *fh, struct v4l2_querymenu *m) { - struct v4l2_querymenu *m = arg; - - memset(m->name, 0, sizeof(m->name)); - m->reserved = 0; + struct camera_data *cam = video_drvdata(file); switch(m->id) { case CPIA2_CID_FLICKER_MODE: @@ -837,9 +843,9 @@ static int ioctl_querymenu(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_g_ctrl(void *arg,struct camera_data *cam) +static int cpia2_g_ctrl(struct file *file, void *fh, struct v4l2_control *c) { - struct v4l2_control *c = arg; + struct camera_data *cam = video_drvdata(file); switch(c->id) { case V4L2_CID_BRIGHTNESS: @@ -955,9 +961,9 @@ static int ioctl_g_ctrl(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_s_ctrl(void *arg,struct camera_data *cam) +static int cpia2_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) { - struct v4l2_control *c = arg; + struct camera_data *cam = video_drvdata(file); int i; int retval = 0; @@ -1031,9 +1037,9 @@ static int ioctl_s_ctrl(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_g_jpegcomp(void *arg,struct camera_data *cam) +static int cpia2_g_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompression *parms) { - struct v4l2_jpegcompression *parms = arg; + struct camera_data *cam = video_drvdata(file); memset(parms, 0, sizeof(*parms)); @@ -1072,9 +1078,9 @@ static int ioctl_g_jpegcomp(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_s_jpegcomp(void *arg,struct camera_data *cam) +static int cpia2_s_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompression *parms) { - struct v4l2_jpegcompression *parms = arg; + struct camera_data *cam = video_drvdata(file); DBG("S_JPEGCOMP APP_len:%d COM_len:%d\n", parms->APP_len, parms->COM_len); @@ -1121,9 +1127,9 @@ static int ioctl_s_jpegcomp(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_reqbufs(void *arg,struct camera_data *cam) +static int cpia2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *req) { - struct v4l2_requestbuffers *req = arg; + struct camera_data *cam = video_drvdata(file); if(req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || req->memory != V4L2_MEMORY_MMAP) @@ -1144,9 +1150,9 @@ static int ioctl_reqbufs(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_querybuf(void *arg,struct camera_data *cam) +static int cpia2_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - struct v4l2_buffer *buf = arg; + struct camera_data *cam = video_drvdata(file); if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || buf->index > cam->num_frames) @@ -1192,9 +1198,9 @@ static int ioctl_querybuf(void *arg,struct camera_data *cam) * *****************************************************************************/ -static int ioctl_qbuf(void *arg,struct camera_data *cam) +static int cpia2_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - struct v4l2_buffer *buf = arg; + struct camera_data *cam = video_drvdata(file); if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || buf->memory != V4L2_MEMORY_MMAP || @@ -1248,9 +1254,9 @@ static int find_earliest_filled_buffer(struct camera_data *cam) * *****************************************************************************/ -static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) +static int cpia2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - struct v4l2_buffer *buf = arg; + struct camera_data *cam = video_drvdata(file); int frame; if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || @@ -1296,210 +1302,56 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) return 0; } -/****************************************************************************** - * - * cpia2_ioctl - * - *****************************************************************************/ -static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) +static int cpia2_g_priority(struct file *file, void *_fh, enum v4l2_priority *p) { - struct camera_data *cam = video_drvdata(file); - long retval = 0; - - if (!cam) - return -ENOTTY; - - if (!cam->present) - return -ENODEV; - - /* Priority check */ - switch (cmd) { - case VIDIOC_S_FMT: - { - struct cpia2_fh *fh = file->private_data; - retval = v4l2_prio_check(&cam->prio, fh->prio); - if (retval) - return retval; - break; - } - default: - break; - } - - switch (cmd) { - /* CPIA2 extension to Video4Linux API */ - case CPIA2_IOC_SET_GPIO: - retval = ioctl_set_gpio(arg, cam); - break; - case VIDIOC_QUERYCAP: - retval = ioctl_querycap(arg,cam); - break; - - case VIDIOC_ENUMINPUT: - case VIDIOC_G_INPUT: - case VIDIOC_S_INPUT: - retval = ioctl_input(cmd, arg, cam); - break; - - case VIDIOC_ENUM_FMT: - retval = ioctl_enum_fmt(arg,cam); - break; - case VIDIOC_TRY_FMT: - retval = ioctl_try_fmt(arg,cam); - break; - case VIDIOC_G_FMT: - retval = ioctl_get_fmt(arg,cam); - break; - case VIDIOC_S_FMT: - retval = ioctl_set_fmt(arg,cam,file->private_data); - break; + struct cpia2_fh *fh = _fh; - case VIDIOC_CROPCAP: - retval = ioctl_cropcap(arg,cam); - break; - case VIDIOC_G_CROP: - case VIDIOC_S_CROP: - // TODO: I think cropping can be implemented - SJB - retval = -EINVAL; - break; - - case VIDIOC_QUERYCTRL: - retval = ioctl_queryctrl(arg,cam); - break; - case VIDIOC_QUERYMENU: - retval = ioctl_querymenu(arg,cam); - break; - case VIDIOC_G_CTRL: - retval = ioctl_g_ctrl(arg,cam); - break; - case VIDIOC_S_CTRL: - retval = ioctl_s_ctrl(arg,cam); - break; - - case VIDIOC_G_JPEGCOMP: - retval = ioctl_g_jpegcomp(arg,cam); - break; - case VIDIOC_S_JPEGCOMP: - retval = ioctl_s_jpegcomp(arg,cam); - break; - - case VIDIOC_G_PRIORITY: - { - struct cpia2_fh *fh = file->private_data; - *(enum v4l2_priority*)arg = fh->prio; - break; - } - case VIDIOC_S_PRIORITY: - { - struct cpia2_fh *fh = file->private_data; - enum v4l2_priority prio; - prio = *(enum v4l2_priority*)arg; - if(cam->streaming && - prio != fh->prio && - fh->prio == V4L2_PRIORITY_RECORD) { - /* Can't drop record priority while streaming */ - retval = -EBUSY; - } else if(prio == V4L2_PRIORITY_RECORD && - prio != fh->prio && - v4l2_prio_max(&cam->prio) == V4L2_PRIORITY_RECORD) { - /* Only one program can record at a time */ - retval = -EBUSY; - } else { - retval = v4l2_prio_change(&cam->prio, &fh->prio, prio); - } - break; - } - - case VIDIOC_REQBUFS: - retval = ioctl_reqbufs(arg,cam); - break; - case VIDIOC_QUERYBUF: - retval = ioctl_querybuf(arg,cam); - break; - case VIDIOC_QBUF: - retval = ioctl_qbuf(arg,cam); - break; - case VIDIOC_DQBUF: - retval = ioctl_dqbuf(arg,cam,file); - break; - case VIDIOC_STREAMON: - { - int type; - DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming); - type = *(int*)arg; - if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - retval = -EINVAL; - - if(!cam->streaming) { - retval = cpia2_usb_stream_start(cam, - cam->params.camera_state.stream_mode); - } else { - retval = -EINVAL; - } - - break; - } - case VIDIOC_STREAMOFF: - { - int type; - DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming); - type = *(int*)arg; - if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - retval = -EINVAL; - - if(cam->streaming) { - retval = cpia2_usb_stream_stop(cam); - } else { - retval = -EINVAL; - } - - break; - } - - case VIDIOC_ENUMOUTPUT: - case VIDIOC_G_OUTPUT: - case VIDIOC_S_OUTPUT: - case VIDIOC_G_MODULATOR: - case VIDIOC_S_MODULATOR: - - case VIDIOC_ENUMAUDIO: - case VIDIOC_G_AUDIO: - case VIDIOC_S_AUDIO: + *p = fh->prio; + return 0; +} - case VIDIOC_ENUMAUDOUT: - case VIDIOC_G_AUDOUT: - case VIDIOC_S_AUDOUT: +static int cpia2_s_priority(struct file *file, void *_fh, enum v4l2_priority prio) +{ + struct camera_data *cam = video_drvdata(file); + struct cpia2_fh *fh = fh; - case VIDIOC_ENUMSTD: - case VIDIOC_QUERYSTD: - case VIDIOC_G_STD: - case VIDIOC_S_STD: + if (cam->streaming && prio != fh->prio && + fh->prio == V4L2_PRIORITY_RECORD) + /* Can't drop record priority while streaming */ + return -EBUSY; - case VIDIOC_G_TUNER: - case VIDIOC_S_TUNER: - case VIDIOC_G_FREQUENCY: - case VIDIOC_S_FREQUENCY: + if (prio == V4L2_PRIORITY_RECORD && prio != fh->prio && + v4l2_prio_max(&cam->prio) == V4L2_PRIORITY_RECORD) + /* Only one program can record at a time */ + return -EBUSY; + return v4l2_prio_change(&cam->prio, &fh->prio, prio); +} - case VIDIOC_OVERLAY: - case VIDIOC_G_FBUF: - case VIDIOC_S_FBUF: +static int cpia2_streamon(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct camera_data *cam = video_drvdata(file); - case VIDIOC_G_PARM: - case VIDIOC_S_PARM: - retval = -EINVAL; - break; - default: - retval = -ENOIOCTLCMD; - break; - } + DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming); + if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; - return retval; + if (!cam->streaming) + return cpia2_usb_stream_start(cam, + cam->params.camera_state.stream_mode); + return -EINVAL; } -static long cpia2_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) +static int cpia2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) { - return video_usercopy(file, cmd, arg, cpia2_do_ioctl); + struct camera_data *cam = video_drvdata(file); + + DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming); + if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->streaming) + return cpia2_usb_stream_stop(cam); + return -EINVAL; } /****************************************************************************** @@ -1550,6 +1402,33 @@ static void reset_camera_struct_v4l(struct camera_data *cam) v4l2_prio_init(&cam->prio); } +static const struct v4l2_ioctl_ops cpia2_ioctl_ops = { + .vidioc_querycap = cpia2_querycap, + .vidioc_enum_input = cpia2_enum_input, + .vidioc_g_input = cpia2_g_input, + .vidioc_s_input = cpia2_s_input, + .vidioc_enum_fmt_vid_cap = cpia2_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = cpia2_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = cpia2_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = cpia2_try_fmt_vid_cap, + .vidioc_queryctrl = cpia2_queryctrl, + .vidioc_querymenu = cpia2_querymenu, + .vidioc_g_ctrl = cpia2_g_ctrl, + .vidioc_s_ctrl = cpia2_s_ctrl, + .vidioc_g_jpegcomp = cpia2_g_jpegcomp, + .vidioc_s_jpegcomp = cpia2_s_jpegcomp, + .vidioc_cropcap = cpia2_cropcap, + .vidioc_reqbufs = cpia2_reqbufs, + .vidioc_querybuf = cpia2_querybuf, + .vidioc_qbuf = cpia2_qbuf, + .vidioc_dqbuf = cpia2_dqbuf, + .vidioc_streamon = cpia2_streamon, + .vidioc_streamoff = cpia2_streamoff, + .vidioc_g_priority = cpia2_g_priority, + .vidioc_s_priority = cpia2_s_priority, + .vidioc_default = cpia2_default, +}; + /*** * The v4l video device structure initialized for this device ***/ @@ -1559,7 +1438,7 @@ static const struct v4l2_file_operations cpia2_fops = { .release = cpia2_close, .read = cpia2_v4l_read, .poll = cpia2_v4l_poll, - .unlocked_ioctl = cpia2_ioctl, + .unlocked_ioctl = video_ioctl2, .mmap = cpia2_mmap, }; @@ -1567,6 +1446,7 @@ static struct video_device cpia2_template = { /* I could not find any place for the old .initialize initializer?? */ .name = "CPiA2 Camera", .fops = &cpia2_fops, + .ioctl_ops = &cpia2_ioctl_ops, .release = video_device_release, }; diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 9358fe77e562..5909f2557ab4 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); MODULE_AUTHOR("Hans Verkuil"); @@ -36,6 +37,20 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); +struct cs5345_state { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; +}; + +static inline struct cs5345_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct cs5345_state, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cs5345_state, hdl)->sd; +} /* ----------------------------------------------------------------------- */ @@ -65,33 +80,20 @@ static int cs5345_s_routing(struct v4l2_subdev *sd, return 0; } -static int cs5345_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int cs5345_s_ctrl(struct v4l2_ctrl *ctrl) { - if (ctrl->id == V4L2_CID_AUDIO_MUTE) { - ctrl->value = (cs5345_read(sd, 0x04) & 0x08) != 0; - return 0; - } - if (ctrl->id != V4L2_CID_AUDIO_VOLUME) - return -EINVAL; - ctrl->value = cs5345_read(sd, 0x07) & 0x3f; - if (ctrl->value >= 32) - ctrl->value = ctrl->value - 64; - return 0; -} + struct v4l2_subdev *sd = to_sd(ctrl); -static int cs5345_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - if (ctrl->id == V4L2_CID_AUDIO_MUTE) { - cs5345_write(sd, 0x04, ctrl->value ? 0x80 : 0); + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + cs5345_write(sd, 0x04, ctrl->val ? 0x80 : 0); + return 0; + case V4L2_CID_AUDIO_VOLUME: + cs5345_write(sd, 0x07, ((u8)ctrl->val) & 0x3f); + cs5345_write(sd, 0x08, ((u8)ctrl->val) & 0x3f); return 0; } - if (ctrl->id != V4L2_CID_AUDIO_VOLUME) - return -EINVAL; - if (ctrl->value > 24 || ctrl->value < -24) - return -EINVAL; - cs5345_write(sd, 0x07, ((u8)ctrl->value) & 0x3f); - cs5345_write(sd, 0x08, ((u8)ctrl->value) & 0x3f); - return 0; + return -EINVAL; } #ifdef CONFIG_VIDEO_ADV_DEBUG @@ -144,11 +146,20 @@ static int cs5345_log_status(struct v4l2_subdev *sd) /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops cs5345_ctrl_ops = { + .s_ctrl = cs5345_s_ctrl, +}; + static const struct v4l2_subdev_core_ops cs5345_core_ops = { .log_status = cs5345_log_status, .g_chip_ident = cs5345_g_chip_ident, - .g_ctrl = cs5345_g_ctrl, - .s_ctrl = cs5345_s_ctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = cs5345_g_register, .s_register = cs5345_s_register, @@ -169,6 +180,7 @@ static const struct v4l2_subdev_ops cs5345_ops = { static int cs5345_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct cs5345_state *state; struct v4l2_subdev *sd; /* Check if the adapter supports the needed features */ @@ -178,11 +190,28 @@ static int cs5345_probe(struct i2c_client *client, v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); - sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL); - if (sd == NULL) + state = kzalloc(sizeof(struct cs5345_state), GFP_KERNEL); + if (state == NULL) return -ENOMEM; + sd = &state->sd; v4l2_i2c_subdev_init(sd, client, &cs5345_ops); + v4l2_ctrl_handler_init(&state->hdl, 2); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -24, 24, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + /* set volume/mute */ + v4l2_ctrl_handler_setup(&state->hdl); + cs5345_write(sd, 0x02, 0x00); cs5345_write(sd, 0x04, 0x01); cs5345_write(sd, 0x09, 0x01); @@ -194,9 +223,11 @@ static int cs5345_probe(struct i2c_client *client, static int cs5345_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct cs5345_state *state = to_state(sd); v4l2_device_unregister_subdev(sd); - kfree(sd); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); return 0; } diff --git a/drivers/media/video/cx18/cx18-av-audio.c b/drivers/media/video/cx18/cx18-av-audio.c index 43d09a24b262..4a24ffb17a7d 100644 --- a/drivers/media/video/cx18/cx18-av-audio.c +++ b/drivers/media/video/cx18/cx18-av-audio.c @@ -342,17 +342,6 @@ void cx18_av_audio_set_path(struct cx18 *cx) } } -static int get_volume(struct cx18 *cx) -{ - /* Volume runs +18dB to -96dB in 1/2dB steps - * change to fit the msp3400 -114dB to +12dB range */ - - /* check PATH1_VOLUME */ - int vol = 228 - cx18_av_read(cx, 0x8d4); - vol = (vol / 2) + 23; - return vol << 9; -} - static void set_volume(struct cx18 *cx, int volume) { /* First convert the volume to msp3400 values (0-127) */ @@ -369,52 +358,18 @@ static void set_volume(struct cx18 *cx, int volume) cx18_av_write(cx, 0x8d4, 228 - (vol * 2)); } -static int get_bass(struct cx18 *cx) -{ - /* bass is 49 steps +12dB to -12dB */ - - /* check PATH1_EQ_BASS_VOL */ - int bass = cx18_av_read(cx, 0x8d9) & 0x3f; - bass = (((48 - bass) * 0xffff) + 47) / 48; - return bass; -} - static void set_bass(struct cx18 *cx, int bass) { /* PATH1_EQ_BASS_VOL */ cx18_av_and_or(cx, 0x8d9, ~0x3f, 48 - (bass * 48 / 0xffff)); } -static int get_treble(struct cx18 *cx) -{ - /* treble is 49 steps +12dB to -12dB */ - - /* check PATH1_EQ_TREBLE_VOL */ - int treble = cx18_av_read(cx, 0x8db) & 0x3f; - treble = (((48 - treble) * 0xffff) + 47) / 48; - return treble; -} - static void set_treble(struct cx18 *cx, int treble) { /* PATH1_EQ_TREBLE_VOL */ cx18_av_and_or(cx, 0x8db, ~0x3f, 48 - (treble * 48 / 0xffff)); } -static int get_balance(struct cx18 *cx) -{ - /* balance is 7 bit, 0 to -96dB */ - - /* check PATH1_BAL_LEVEL */ - int balance = cx18_av_read(cx, 0x8d5) & 0x7f; - /* check PATH1_BAL_LEFT */ - if ((cx18_av_read(cx, 0x8d5) & 0x80) == 0) - balance = 0x80 - balance; - else - balance = 0x80 + balance; - return balance << 8; -} - static void set_balance(struct cx18 *cx, int balance) { int bal = balance >> 8; @@ -431,12 +386,6 @@ static void set_balance(struct cx18 *cx, int balance) } } -static int get_mute(struct cx18 *cx) -{ - /* check SRC1_MUTE_EN */ - return cx18_av_read(cx, 0x8d3) & 0x2 ? 1 : 0; -} - static void set_mute(struct cx18 *cx, int mute) { struct cx18_av_state *state = &cx->av_state; @@ -490,50 +439,33 @@ int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq) return retval; } -int cx18_av_audio_g_ctrl(struct cx18 *cx, struct v4l2_control *ctrl) +static int cx18_av_audio_s_ctrl(struct v4l2_ctrl *ctrl) { - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = get_volume(cx); - break; - case V4L2_CID_AUDIO_BASS: - ctrl->value = get_bass(cx); - break; - case V4L2_CID_AUDIO_TREBLE: - ctrl->value = get_treble(cx); - break; - case V4L2_CID_AUDIO_BALANCE: - ctrl->value = get_balance(cx); - break; - case V4L2_CID_AUDIO_MUTE: - ctrl->value = get_mute(cx); - break; - default: - return -EINVAL; - } - return 0; -} + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx18 *cx = v4l2_get_subdevdata(sd); -int cx18_av_audio_s_ctrl(struct cx18 *cx, struct v4l2_control *ctrl) -{ switch (ctrl->id) { case V4L2_CID_AUDIO_VOLUME: - set_volume(cx, ctrl->value); + set_volume(cx, ctrl->val); break; case V4L2_CID_AUDIO_BASS: - set_bass(cx, ctrl->value); + set_bass(cx, ctrl->val); break; case V4L2_CID_AUDIO_TREBLE: - set_treble(cx, ctrl->value); + set_treble(cx, ctrl->val); break; case V4L2_CID_AUDIO_BALANCE: - set_balance(cx, ctrl->value); + set_balance(cx, ctrl->val); break; case V4L2_CID_AUDIO_MUTE: - set_mute(cx, ctrl->value); + set_mute(cx, ctrl->val); break; default: return -EINVAL; } return 0; } + +const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops = { + .s_ctrl = cx18_av_audio_s_ctrl, +}; diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index a41951cab276..f164b7f610a5 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -129,6 +129,7 @@ static void cx18_av_initialize(struct v4l2_subdev *sd) { struct cx18_av_state *state = to_cx18_av_state(sd); struct cx18 *cx = v4l2_get_subdevdata(sd); + int default_volume; u32 v; cx18_av_loadfw(cx); @@ -247,8 +248,23 @@ static void cx18_av_initialize(struct v4l2_subdev *sd) /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */ /* } */ cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F); - state->default_volume = 228 - cx18_av_read(cx, 0x8d4); - state->default_volume = ((state->default_volume / 2) + 23) << 9; + default_volume = cx18_av_read(cx, 0x8d4); + /* + * Enforce the legacy volume scale mapping limits to avoid + * -ERANGE errors when initializing the volume control + */ + if (default_volume > 228) { + /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ + default_volume = 228; + cx18_av_write(cx, 0x8d4, 228); + } else if (default_volume < 20) { + /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ + default_volume = 20; + cx18_av_write(cx, 0x8d4, 20); + } + default_volume = (((228 - default_volume) >> 1) + 23) << 9; + state->volume->cur.val = state->volume->default_value = default_volume; + v4l2_ctrl_handler_setup(&state->hdl); } static int cx18_av_reset(struct v4l2_subdev *sd, u32 val) @@ -901,126 +917,35 @@ static int cx18_av_s_radio(struct v4l2_subdev *sd) return 0; } -static int cx18_av_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl) { + struct v4l2_subdev *sd = to_sd(ctrl); struct cx18 *cx = v4l2_get_subdevdata(sd); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - if (ctrl->value < 0 || ctrl->value > 255) { - CX18_ERR_DEV(sd, "invalid brightness setting %d\n", - ctrl->value); - return -ERANGE; - } - - cx18_av_write(cx, 0x414, ctrl->value - 128); + cx18_av_write(cx, 0x414, ctrl->val - 128); break; case V4L2_CID_CONTRAST: - if (ctrl->value < 0 || ctrl->value > 127) { - CX18_ERR_DEV(sd, "invalid contrast setting %d\n", - ctrl->value); - return -ERANGE; - } - - cx18_av_write(cx, 0x415, ctrl->value << 1); + cx18_av_write(cx, 0x415, ctrl->val << 1); break; case V4L2_CID_SATURATION: - if (ctrl->value < 0 || ctrl->value > 127) { - CX18_ERR_DEV(sd, "invalid saturation setting %d\n", - ctrl->value); - return -ERANGE; - } - - cx18_av_write(cx, 0x420, ctrl->value << 1); - cx18_av_write(cx, 0x421, ctrl->value << 1); + cx18_av_write(cx, 0x420, ctrl->val << 1); + cx18_av_write(cx, 0x421, ctrl->val << 1); break; case V4L2_CID_HUE: - if (ctrl->value < -128 || ctrl->value > 127) { - CX18_ERR_DEV(sd, "invalid hue setting %d\n", - ctrl->value); - return -ERANGE; - } - - cx18_av_write(cx, 0x422, ctrl->value); + cx18_av_write(cx, 0x422, ctrl->val); break; - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_MUTE: - return cx18_av_audio_s_ctrl(cx, ctrl); - - default: - return -EINVAL; - } - return 0; -} - -static int cx18_av_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct cx18 *cx = v4l2_get_subdevdata(sd); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = (s8)cx18_av_read(cx, 0x414) + 128; - break; - case V4L2_CID_CONTRAST: - ctrl->value = cx18_av_read(cx, 0x415) >> 1; - break; - case V4L2_CID_SATURATION: - ctrl->value = cx18_av_read(cx, 0x420) >> 1; - break; - case V4L2_CID_HUE: - ctrl->value = (s8)cx18_av_read(cx, 0x422); - break; - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_MUTE: - return cx18_av_audio_g_ctrl(cx, ctrl); default: return -EINVAL; } return 0; } -static int cx18_av_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - struct cx18_av_state *state = to_cx18_av_state(sd); - - switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); - case V4L2_CID_CONTRAST: - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - default: - break; - } - - switch (qc->id) { - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, - 65535 / 100, state->default_volume); - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); - default: - return -EINVAL; - } - return -EINVAL; -} - static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) { struct cx18_av_state *state = to_cx18_av_state(sd); @@ -1356,14 +1281,22 @@ static int cx18_av_s_register(struct v4l2_subdev *sd, } #endif +static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = { + .s_ctrl = cx18_av_s_ctrl, +}; + static const struct v4l2_subdev_core_ops cx18_av_general_ops = { .g_chip_ident = cx18_av_g_chip_ident, .log_status = cx18_av_log_status, .load_fw = cx18_av_load_fw, .reset = cx18_av_reset, - .queryctrl = cx18_av_queryctrl, - .g_ctrl = cx18_av_g_ctrl, - .s_ctrl = cx18_av_s_ctrl, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = cx18_av_s_std, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = cx18_av_g_register, @@ -1427,8 +1360,42 @@ int cx18_av_probe(struct cx18 *cx) snprintf(sd->name, sizeof(sd->name), "%s %03x", cx->v4l2_dev.name, (state->rev >> 4)); sd->grp_id = CX18_HW_418_AV; + v4l2_ctrl_handler_init(&state->hdl, 9); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + + state->volume = v4l2_ctrl_new_std(&state->hdl, + &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, + 0, 65535, 65535 / 100, 0); + v4l2_ctrl_new_std(&state->hdl, + &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, + 0, 1, 1, 0); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_BASS, + 0, 65535, 65535 / 100, 32768); + v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, + V4L2_CID_AUDIO_TREBLE, + 0, 65535, 65535 / 100, 32768); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + return err; + } err = v4l2_device_register_subdev(&cx->v4l2_dev, sd); - if (!err) + if (err) + v4l2_ctrl_handler_free(&state->hdl); + else cx18_av_init(cx); return err; } diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 1956991795e3..188c9c3d2db1 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -26,6 +26,7 @@ #define _CX18_AV_CORE_H_ #include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> struct cx18; @@ -95,13 +96,14 @@ enum cx18_av_audio_input { struct cx18_av_state { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl *volume; int radio; v4l2_std_id std; enum cx18_av_video_input vid_input; enum cx18_av_audio_input aud_input; u32 audclk_freq; int audmode; - int default_volume; u32 id; u32 rev; int is_initialized; @@ -347,6 +349,11 @@ static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd) return container_of(sd, struct cx18_av_state, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct cx18_av_state, hdl)->sd; +} + /* ----------------------------------------------------------------------- */ /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); @@ -369,10 +376,9 @@ int cx18_av_loadfw(struct cx18 *cx); /* ----------------------------------------------------------------------- */ /* cx18_av-audio.c */ -int cx18_av_audio_g_ctrl(struct cx18 *cx, struct v4l2_control *ctrl); -int cx18_av_audio_s_ctrl(struct cx18 *cx, struct v4l2_control *ctrl); int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq); void cx18_av_audio_set_path(struct cx18 *cx); +extern const struct v4l2_ctrl_ops cx18_av_audio_ctrl_ops; /* ----------------------------------------------------------------------- */ /* cx18_av-vbi.c */ diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 97d7b7e100a3..282a3d29fdaa 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -30,152 +30,11 @@ #include "cx18-mailbox.h" #include "cx18-controls.h" -/* Must be sorted from low to high control ID! */ -static const u32 user_ctrls[] = { - V4L2_CID_USER_CLASS, - V4L2_CID_BRIGHTNESS, - V4L2_CID_CONTRAST, - V4L2_CID_SATURATION, - V4L2_CID_HUE, - V4L2_CID_AUDIO_VOLUME, - V4L2_CID_AUDIO_BALANCE, - V4L2_CID_AUDIO_BASS, - V4L2_CID_AUDIO_TREBLE, - V4L2_CID_AUDIO_MUTE, - V4L2_CID_AUDIO_LOUDNESS, - 0 -}; - -static const u32 *ctrl_classes[] = { - user_ctrls, - cx2341x_mpeg_ctrls, - NULL -}; - -int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qctrl) -{ - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; - const char *name; - - qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); - if (qctrl->id == 0) - return -EINVAL; - - switch (qctrl->id) { - /* Standard V4L2 controls */ - case V4L2_CID_USER_CLASS: - return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0); - case V4L2_CID_BRIGHTNESS: - case V4L2_CID_HUE: - case V4L2_CID_SATURATION: - case V4L2_CID_CONTRAST: - if (v4l2_subdev_call(cx->sd_av, core, queryctrl, qctrl)) - qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; - return 0; - - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_LOUDNESS: - if (v4l2_subdev_call(cx->sd_av, core, queryctrl, qctrl)) - qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; - return 0; - - default: - if (cx2341x_ctrl_query(&cx->params, qctrl)) - qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; - return 0; - } - strncpy(qctrl->name, name, sizeof(qctrl->name) - 1); - qctrl->name[sizeof(qctrl->name) - 1] = 0; - return 0; -} - -int cx18_querymenu(struct file *file, void *fh, struct v4l2_querymenu *qmenu) +static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; - struct v4l2_queryctrl qctrl; - - qctrl.id = qmenu->id; - cx18_queryctrl(file, fh, &qctrl); - return v4l2_ctrl_query_menu(qmenu, &qctrl, - cx2341x_ctrl_get_menu(&cx->params, qmenu->id)); -} - -static int cx18_try_ctrl(struct file *file, void *fh, - struct v4l2_ext_control *vctrl) -{ - struct v4l2_queryctrl qctrl; - const char * const *menu_items = NULL; - int err; - - qctrl.id = vctrl->id; - err = cx18_queryctrl(file, fh, &qctrl); - if (err) - return err; - if (qctrl.type == V4L2_CTRL_TYPE_MENU) - menu_items = v4l2_ctrl_get_menu(qctrl.id); - return v4l2_ctrl_check(vctrl, &qctrl, menu_items); -} - -static int cx18_s_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) -{ - switch (vctrl->id) { - /* Standard V4L2 controls */ - case V4L2_CID_BRIGHTNESS: - case V4L2_CID_HUE: - case V4L2_CID_SATURATION: - case V4L2_CID_CONTRAST: - return v4l2_subdev_call(cx->sd_av, core, s_ctrl, vctrl); - - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_LOUDNESS: - return v4l2_subdev_call(cx->sd_av, core, s_ctrl, vctrl); - - default: - CX18_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id); - return -EINVAL; - } - return 0; -} - -static int cx18_g_ctrl(struct cx18 *cx, struct v4l2_control *vctrl) -{ - switch (vctrl->id) { - /* Standard V4L2 controls */ - case V4L2_CID_BRIGHTNESS: - case V4L2_CID_HUE: - case V4L2_CID_SATURATION: - case V4L2_CID_CONTRAST: - return v4l2_subdev_call(cx->sd_av, core, g_ctrl, vctrl); - - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_LOUDNESS: - return v4l2_subdev_call(cx->sd_av, core, g_ctrl, vctrl); + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + int type = cxhdl->stream_type->val; - default: - CX18_DEBUG_IOCTL("invalid control 0x%x\n", vctrl->id); - return -EINVAL; - } - return 0; -} - -static int cx18_setup_vbi_fmt(struct cx18 *cx, - enum v4l2_mpeg_stream_vbi_fmt fmt, - enum v4l2_mpeg_stream_type type) -{ - if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) - return -EINVAL; if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; @@ -230,121 +89,43 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, return 0; } -int cx18_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) +static int cx18_s_video_encoding(struct cx2341x_handler *cxhdl, u32 val) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; - struct v4l2_control ctrl; - - if (c->ctrl_class == V4L2_CTRL_CLASS_USER) { - int i; - int err = 0; - - for (i = 0; i < c->count; i++) { - ctrl.id = c->controls[i].id; - ctrl.value = c->controls[i].value; - err = cx18_g_ctrl(cx, &ctrl); - c->controls[i].value = ctrl.value; - if (err) { - c->error_idx = i; - break; - } - } - return err; - } - if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) - return cx2341x_ext_ctrls(&cx->params, 0, c, VIDIOC_G_EXT_CTRLS); - return -EINVAL; + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); + int is_mpeg1 = val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1; + struct v4l2_mbus_framefmt fmt; + + /* fix videodecoder resolution */ + fmt.width = cxhdl->width / (is_mpeg1 ? 2 : 1); + fmt.height = cxhdl->height; + fmt.code = V4L2_MBUS_FMT_FIXED; + v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt); + return 0; } -int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) +static int cx18_s_audio_sampling_freq(struct cx2341x_handler *cxhdl, u32 idx) { - struct cx18_open_id *id = fh; - struct cx18 *cx = id->cx; - int ret; - struct v4l2_control ctrl; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; - - if (c->ctrl_class == V4L2_CTRL_CLASS_USER) { - int i; - int err = 0; - - for (i = 0; i < c->count; i++) { - ctrl.id = c->controls[i].id; - ctrl.value = c->controls[i].value; - err = cx18_s_ctrl(cx, &ctrl); - c->controls[i].value = ctrl.value; - if (err) { - c->error_idx = i; - break; - } - } - return err; - } - if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { - static u32 freqs[3] = { 44100, 48000, 32000 }; - struct cx18_api_func_private priv; - struct cx2341x_mpeg_params p = cx->params; - int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), - c, VIDIOC_S_EXT_CTRLS); - unsigned int idx; - - if (err) - return err; + static const u32 freqs[3] = { 44100, 48000, 32000 }; + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); - if (p.video_encoding != cx->params.video_encoding) { - int is_mpeg1 = p.video_encoding == - V4L2_MPEG_VIDEO_ENCODING_MPEG_1; - struct v4l2_mbus_framefmt fmt; - - /* fix videodecoder resolution */ - fmt.width = cx->params.width / (is_mpeg1 ? 2 : 1); - fmt.height = cx->params.height; - fmt.code = V4L2_MBUS_FMT_FIXED; - v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &fmt); - } - priv.cx = cx; - priv.s = &cx->streams[id->type]; - err = cx2341x_update(&priv, cx18_api_func, &cx->params, &p); - if (!err && - (cx->params.stream_vbi_fmt != p.stream_vbi_fmt || - cx->params.stream_type != p.stream_type)) - err = cx18_setup_vbi_fmt(cx, p.stream_vbi_fmt, - p.stream_type); - cx->params = p; - cx->dualwatch_stereo_mode = p.audio_properties & 0x0300; - idx = p.audio_properties & 0x03; - /* The audio clock of the digitizer must match the codec sample - rate otherwise you get some very strange effects. */ - if (idx < ARRAY_SIZE(freqs)) - cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); - return err; - } - return -EINVAL; + /* The audio clock of the digitizer must match the codec sample + rate otherwise you get some very strange effects. */ + if (idx < ARRAY_SIZE(freqs)) + cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); + return 0; } -int cx18_try_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) +static int cx18_s_audio_mode(struct cx2341x_handler *cxhdl, u32 val) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = container_of(cxhdl, struct cx18, cxhdl); - if (c->ctrl_class == V4L2_CTRL_CLASS_USER) { - int i; - int err = 0; - - for (i = 0; i < c->count; i++) { - err = cx18_try_ctrl(file, fh, &c->controls[i]); - if (err) { - c->error_idx = i; - break; - } - } - return err; - } - if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) - return cx2341x_ext_ctrls(&cx->params, - atomic_read(&cx->ana_capturing), - c, VIDIOC_TRY_EXT_CTRLS); - return -EINVAL; + cx->dualwatch_stereo_mode = val; + return 0; } + +struct cx2341x_handler_ops cx18_cxhdl_ops = { + .s_audio_mode = cx18_s_audio_mode, + .s_audio_sampling_freq = cx18_s_audio_sampling_freq, + .s_video_encoding = cx18_s_video_encoding, + .s_stream_vbi_fmt = cx18_s_stream_vbi_fmt, +}; diff --git a/drivers/media/video/cx18/cx18-controls.h b/drivers/media/video/cx18/cx18-controls.h index e46323700b81..cb5dfc7b2054 100644 --- a/drivers/media/video/cx18/cx18-controls.h +++ b/drivers/media/video/cx18/cx18-controls.h @@ -21,9 +21,4 @@ * 02111-1307 USA */ -int cx18_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *a); -int cx18_g_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a); -int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *a); -int cx18_try_ext_ctrls(struct file *file, void *fh, - struct v4l2_ext_controls *a); -int cx18_querymenu(struct file *file, void *fh, struct v4l2_querymenu *a); +extern struct cx2341x_handler_ops cx18_cxhdl_ops; diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index b1c3cbd92743..321c1b79794c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -36,6 +36,7 @@ #include "cx18-scb.h" #include "cx18-mailbox.h" #include "cx18-ioctl.h" +#include "cx18-controls.h" #include "tuner-xc2028.h" #include <media/tveeprom.h> @@ -729,15 +730,22 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) cx->open_id = 1; /* Initial settings */ - cx2341x_fill_defaults(&cx->params); - cx->temporal_strength = cx->params.video_temporal_filter; - cx->spatial_strength = cx->params.video_spatial_filter; - cx->filter_mode = cx->params.video_spatial_filter_mode | - (cx->params.video_temporal_filter_mode << 1) | - (cx->params.video_median_filter_type << 2); - cx->params.port = CX2341X_PORT_MEMORY; - cx->params.capabilities = - CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_SLICED_VBI; + cx->cxhdl.port = CX2341X_PORT_MEMORY; + cx->cxhdl.capabilities = CX2341X_CAP_HAS_TS | CX2341X_CAP_HAS_SLICED_VBI; + cx->cxhdl.ops = &cx18_cxhdl_ops; + cx->cxhdl.func = cx18_api_func; + cx->cxhdl.priv = &cx->streams[CX18_ENC_STREAM_TYPE_MPG]; + ret = cx2341x_handler_init(&cx->cxhdl, 50); + if (ret) + return ret; + cx->v4l2_dev.ctrl_handler = &cx->cxhdl.hdl; + + cx->temporal_strength = cx->cxhdl.video_temporal_filter->cur.val; + cx->spatial_strength = cx->cxhdl.video_spatial_filter->cur.val; + cx->filter_mode = cx->cxhdl.video_spatial_filter_mode->cur.val | + (cx->cxhdl.video_temporal_filter_mode->cur.val << 1) | + (cx->cxhdl.video_median_filter_type->cur.val << 2); + init_waitqueue_head(&cx->cap_w); init_waitqueue_head(&cx->mb_apu_waitq); init_waitqueue_head(&cx->mb_cpu_waitq); @@ -1049,7 +1057,7 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, else cx->is_50hz = 1; - cx->params.video_gop_size = cx->is_60hz ? 15 : 12; + cx2341x_handler_set_50hz(&cx->cxhdl, !cx->is_60hz); if (cx->options.radio > 0) cx->v4l2_cap |= V4L2_CAP_RADIO; @@ -1095,7 +1103,6 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev, /* Load cx18 submodules (cx18-alsa) */ request_modules(cx); - return 0; free_streams: @@ -1278,6 +1285,8 @@ static void cx18_remove(struct pci_dev *pci_dev) for (i = 0; i < CX18_VBI_FRAMES; i++) kfree(cx->vbi.sliced_mpeg_data[i]); + v4l2_ctrl_handler_free(&cx->av_state.hdl); + CX18_INFO("Removed %s\n", cx->card_name); v4l2_device_unregister(v4l2_dev); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index f736679d2517..b86a740c68df 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -50,6 +50,7 @@ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> +#include <media/v4l2-fh.h> #include <media/tuner.h> #include <media/ir-kbd-i2c.h> #include "cx18-mailbox.h" @@ -405,12 +406,22 @@ struct cx18_stream { }; struct cx18_open_id { + struct v4l2_fh fh; u32 open_id; int type; - enum v4l2_priority prio; struct cx18 *cx; }; +static inline struct cx18_open_id *fh2id(struct v4l2_fh *fh) +{ + return container_of(fh, struct cx18_open_id, fh); +} + +static inline struct cx18_open_id *file2id(struct file *file) +{ + return fh2id(file->private_data); +} + /* forward declaration of struct defined in cx18-cards.h */ struct cx18_card; @@ -565,7 +576,7 @@ struct cx18 { struct cx18_av_state av_state; /* codec settings */ - struct cx2341x_mpeg_params params; + struct cx2341x_handler cxhdl; u32 filter_mode; u32 temporal_strength; u32 spatial_strength; @@ -593,7 +604,6 @@ struct cx18 { uninitialized value in the stream->id. */ u32 base_addr; - struct v4l2_prio_state prio; u8 card_rev; void __iomem *enc_mem, *reg_mem; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 9f23b90732f2..e9802d99439b 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -160,13 +160,10 @@ EXPORT_SYMBOL(cx18_release_stream); static void cx18_dualwatch(struct cx18 *cx) { struct v4l2_tuner vt; - u32 new_bitmap; u32 new_stereo_mode; - const u32 stereo_mask = 0x0300; const u32 dual = 0x0200; - u32 h; - new_stereo_mode = cx->params.audio_properties & stereo_mask; + new_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode); memset(&vt, 0, sizeof(vt)); cx18_call_all(cx, tuner, g_tuner, &vt); if (vt.audmode == V4L2_TUNER_MODE_LANG1_LANG2 && @@ -176,25 +173,10 @@ static void cx18_dualwatch(struct cx18 *cx) if (new_stereo_mode == cx->dualwatch_stereo_mode) return; - new_bitmap = new_stereo_mode - | (cx->params.audio_properties & ~stereo_mask); - - CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x. " - "new audio_bitmask=0x%ux\n", - cx->dualwatch_stereo_mode, new_stereo_mode, new_bitmap); - - h = cx18_find_handle(cx); - if (h == CX18_INVALID_TASK_HANDLE) { - CX18_DEBUG_INFO("dualwatch: can't find valid task handle\n"); - return; - } - - if (cx18_vapi(cx, - CX18_CPU_SET_AUDIO_PARAMETERS, 2, h, new_bitmap) == 0) { - cx->dualwatch_stereo_mode = new_stereo_mode; - return; - } - CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n"); + CX18_DEBUG_INFO("dualwatch: change stereo flag from 0x%x to 0x%x.\n", + cx->dualwatch_stereo_mode, new_stereo_mode); + if (v4l2_ctrl_s_ctrl(cx->cxhdl.audio_mode, new_stereo_mode)) + CX18_DEBUG_INFO("dualwatch: changing stereo flag failed\n"); } @@ -603,7 +585,7 @@ start_failed: ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, loff_t *pos) { - struct cx18_open_id *id = filp->private_data; + struct cx18_open_id *id = file2id(filp); struct cx18 *cx = id->cx; struct cx18_stream *s = &cx->streams[id->type]; int rc; @@ -620,7 +602,7 @@ ssize_t cx18_v4l2_read(struct file *filp, char __user *buf, size_t count, unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) { - struct cx18_open_id *id = filp->private_data; + struct cx18_open_id *id = file2id(filp); struct cx18 *cx = id->cx; struct cx18_stream *s = &cx->streams[id->type]; int eof = test_bit(CX18_F_S_STREAMOFF, &s->s_flags); @@ -694,13 +676,15 @@ void cx18_stop_capture(struct cx18_open_id *id, int gop_end) int cx18_v4l2_close(struct file *filp) { - struct cx18_open_id *id = filp->private_data; + struct v4l2_fh *fh = filp->private_data; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; struct cx18_stream *s = &cx->streams[id->type]; CX18_DEBUG_IOCTL("close() of %s\n", s->name); - v4l2_prio_close(&cx->prio, id->prio); + v4l2_fh_del(fh); + v4l2_fh_exit(fh); /* Easy case first: this stream was never claimed by us */ if (s->id != id->open_id) { @@ -724,8 +708,8 @@ int cx18_v4l2_close(struct file *filp) if (atomic_read(&cx->ana_capturing) > 0) { /* Undo video mute */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, - cx->params.video_mute | - (cx->params.video_mute_yuv << 8)); + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute) | + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8))); } /* Done! Unmute and continue. */ cx18_unmute(cx); @@ -746,22 +730,24 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) CX18_DEBUG_FILE("open %s\n", s->name); /* Allocate memory */ - item = kmalloc(sizeof(struct cx18_open_id), GFP_KERNEL); + item = kzalloc(sizeof(struct cx18_open_id), GFP_KERNEL); if (NULL == item) { CX18_DEBUG_WARN("nomem on v4l2 open\n"); return -ENOMEM; } + v4l2_fh_init(&item->fh, s->video_dev); + item->cx = cx; item->type = s->type; - v4l2_prio_open(&cx->prio, &item->prio); item->open_id = cx->open_id++; - filp->private_data = item; + filp->private_data = &item->fh; if (item->type == CX18_ENC_STREAM_TYPE_RAD) { /* Try to claim this stream */ if (cx18_claim_stream(item, item->type)) { /* No, it's already in use */ + v4l2_fh_exit(&item->fh); kfree(item); return -EBUSY; } @@ -771,6 +757,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) /* switching to radio while capture is in progress is not polite */ cx18_release_stream(s); + v4l2_fh_exit(&item->fh); kfree(item); return -EBUSY; } @@ -787,6 +774,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) /* Done! Unmute and continue. */ cx18_unmute(cx); } + v4l2_fh_add(&item->fh); return 0; } diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index c330fb917b50..040aaa87579d 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -96,7 +96,7 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw, /* Our default information for ir-kbd-i2c.c to use */ switch (hw) { case CX18_HW_Z8F0811_IR_RX_HAUP: - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; init_data->name = cx->card_name; diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 7150195740dc..86c30b9963e5 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -148,12 +148,12 @@ u16 cx18_get_service_set(struct v4l2_sliced_vbi_format *fmt) static int cx18_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; - pixfmt->width = cx->params.width; - pixfmt->height = cx->params.height; + pixfmt->width = cx->cxhdl.width; + pixfmt->height = cx->cxhdl.height; pixfmt->colorspace = V4L2_COLORSPACE_SMPTE170M; pixfmt->field = V4L2_FIELD_INTERLACED; pixfmt->priv = 0; @@ -173,7 +173,7 @@ static int cx18_g_fmt_vid_cap(struct file *file, void *fh, static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi; vbifmt->sampling_rate = 27000000; @@ -192,7 +192,7 @@ static int cx18_g_fmt_vbi_cap(struct file *file, void *fh, static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; /* sane, V4L2 spec compliant, defaults */ @@ -221,7 +221,7 @@ static int cx18_g_fmt_sliced_vbi_cap(struct file *file, void *fh, static int cx18_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; @@ -252,7 +252,7 @@ static int cx18_try_fmt_vbi_cap(struct file *file, void *fh, static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; vbifmt->io_size = sizeof(struct v4l2_sliced_vbi_data) * 36; @@ -271,30 +271,26 @@ static int cx18_try_fmt_sliced_vbi_cap(struct file *file, void *fh, static int cx18_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; struct v4l2_mbus_framefmt mbus_fmt; int ret; int w, h; - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; - ret = cx18_try_fmt_vid_cap(file, fh, fmt); if (ret) return ret; w = fmt->fmt.pix.width; h = fmt->fmt.pix.height; - if (cx->params.width == w && cx->params.height == h) + if (cx->cxhdl.width == w && cx->cxhdl.height == h) return 0; if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; - mbus_fmt.width = cx->params.width = w; - mbus_fmt.height = cx->params.height = h; + mbus_fmt.width = cx->cxhdl.width = w; + mbus_fmt.height = cx->cxhdl.height = h; mbus_fmt.code = V4L2_MBUS_FMT_FIXED; v4l2_subdev_call(cx->sd_av, video, s_mbus_fmt, &mbus_fmt); return cx18_g_fmt_vid_cap(file, fh, fmt); @@ -303,14 +299,10 @@ static int cx18_s_fmt_vid_cap(struct file *file, void *fh, static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; int ret; - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; - /* * Changing the Encoder's Raw VBI parameters won't have any effect * if any analog capture is ongoing @@ -337,15 +329,11 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh, static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; int ret; struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; - cx18_try_fmt_sliced_vbi_cap(file, fh, fmt); /* @@ -372,7 +360,7 @@ static int cx18_s_fmt_sliced_vbi_cap(struct file *file, void *fh, static int cx18_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; int err = 0; chip->ident = V4L2_IDENT_NONE; @@ -442,7 +430,7 @@ static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg) static int cx18_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_G_REGISTER, reg); @@ -454,7 +442,7 @@ static int cx18_g_register(struct file *file, void *fh, static int cx18_s_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (v4l2_chip_match_host(®->match)) return cx18_cxc(cx, VIDIOC_DBG_S_REGISTER, reg); @@ -464,26 +452,10 @@ static int cx18_s_register(struct file *file, void *fh, } #endif -static int cx18_g_priority(struct file *file, void *fh, enum v4l2_priority *p) -{ - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; - - *p = v4l2_prio_max(&cx->prio); - return 0; -} - -static int cx18_s_priority(struct file *file, void *fh, enum v4l2_priority prio) -{ - struct cx18_open_id *id = fh; - struct cx18 *cx = id->cx; - - return v4l2_prio_change(&cx->prio, &id->prio, prio); -} - static int cx18_querycap(struct file *file, void *fh, struct v4l2_capability *vcap) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; strlcpy(vcap->driver, CX18_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); @@ -496,14 +468,14 @@ static int cx18_querycap(struct file *file, void *fh, static int cx18_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; return cx18_get_audio_input(cx, vin->index, vin); } static int cx18_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; vin->index = cx->audio_input; return cx18_get_audio_input(cx, vin->index, vin); @@ -511,7 +483,7 @@ static int cx18_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) static int cx18_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (vout->index >= cx->nof_audio_inputs) return -EINVAL; @@ -522,7 +494,7 @@ static int cx18_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) static int cx18_enum_input(struct file *file, void *fh, struct v4l2_input *vin) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; /* set it to defaults from our table */ return cx18_get_input(cx, vin->index, vin); @@ -531,7 +503,7 @@ static int cx18_enum_input(struct file *file, void *fh, struct v4l2_input *vin) static int cx18_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -546,13 +518,8 @@ static int cx18_cropcap(struct file *file, void *fh, static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - int ret; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -562,7 +529,7 @@ static int cx18_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) static int cx18_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -590,7 +557,7 @@ static int cx18_enum_fmt_vid_cap(struct file *file, void *fh, static int cx18_g_input(struct file *file, void *fh, unsigned int *i) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; *i = cx->active_input; return 0; @@ -598,13 +565,8 @@ static int cx18_g_input(struct file *file, void *fh, unsigned int *i) int cx18_s_input(struct file *file, void *fh, unsigned int inp) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - int ret; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; if (inp >= cx->nof_inputs) return -EINVAL; @@ -633,7 +595,7 @@ int cx18_s_input(struct file *file, void *fh, unsigned int inp) static int cx18_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (vf->tuner != 0) return -EINVAL; @@ -644,13 +606,8 @@ static int cx18_g_frequency(struct file *file, void *fh, int cx18_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - int ret; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; if (vf->tuner != 0) return -EINVAL; @@ -664,7 +621,7 @@ int cx18_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) static int cx18_g_std(struct file *file, void *fh, v4l2_std_id *std) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; *std = cx->std; return 0; @@ -672,13 +629,8 @@ static int cx18_g_std(struct file *file, void *fh, v4l2_std_id *std) int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - int ret; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; if ((*std & V4L2_STD_ALL) == 0) return -EINVAL; @@ -696,9 +648,10 @@ int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) cx->std = *std; cx->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0; - cx->params.is_50hz = cx->is_50hz = !cx->is_60hz; - cx->params.width = 720; - cx->params.height = cx->is_50hz ? 576 : 480; + cx->is_50hz = !cx->is_60hz; + cx2341x_handler_set_50hz(&cx->cxhdl, cx->is_50hz); + cx->cxhdl.width = 720; + cx->cxhdl.height = cx->is_50hz ? 576 : 480; cx->vbi.count = cx->is_50hz ? 18 : 12; cx->vbi.start[0] = cx->is_50hz ? 6 : 10; cx->vbi.start[1] = cx->is_50hz ? 318 : 273; @@ -712,13 +665,8 @@ int cx18_s_std(struct file *file, void *fh, v4l2_std_id *std) static int cx18_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; - int ret; - - ret = v4l2_prio_check(&cx->prio, id->prio); - if (ret) - return ret; if (vt->index != 0) return -EINVAL; @@ -729,7 +677,7 @@ static int cx18_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; if (vt->index != 0) return -EINVAL; @@ -750,7 +698,7 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int cx18_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; int set = cx->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; int f, l; @@ -871,7 +819,7 @@ static int cx18_process_idx_data(struct cx18_stream *s, struct cx18_mdl *mdl, static int cx18_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *idx) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_IDX]; s32 tmp; struct cx18_mdl *mdl; @@ -918,7 +866,7 @@ static int cx18_g_enc_index(struct file *file, void *fh, static int cx18_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) { - struct cx18_open_id *id = fh; + struct cx18_open_id *id = fh2id(fh); struct cx18 *cx = id->cx; u32 h; @@ -979,7 +927,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh, static int cx18_try_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; switch (enc->cmd) { case V4L2_ENC_CMD_START: @@ -1011,7 +959,7 @@ static int cx18_try_encoder_cmd(struct file *file, void *fh, static int cx18_log_status(struct file *file, void *fh) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; struct v4l2_input vidin; struct v4l2_audio audin; int i; @@ -1035,7 +983,7 @@ static int cx18_log_status(struct file *file, void *fh) mutex_unlock(&cx->gpio_lock); CX18_INFO("Tuner: %s\n", test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ? "Radio" : "TV"); - cx2341x_log_status(&cx->params, cx->v4l2_dev.name); + v4l2_ctrl_handler_log_status(&cx->cxhdl.hdl, cx->v4l2_dev.name); CX18_INFO("Status flags: 0x%08lx\n", cx->i_flags); for (i = 0; i < CX18_MAX_STREAMS; i++) { struct cx18_stream *s = &cx->streams[i]; @@ -1056,9 +1004,10 @@ static int cx18_log_status(struct file *file, void *fh) return 0; } -static long cx18_default(struct file *file, void *fh, int cmd, void *arg) +static long cx18_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) { - struct cx18 *cx = ((struct cx18_open_id *)fh)->cx; + struct cx18 *cx = fh2id(fh)->cx; switch (cmd) { case VIDIOC_INT_RESET: { @@ -1080,14 +1029,12 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vfd = video_devdata(filp); - struct cx18_open_id *id = filp->private_data; + struct cx18_open_id *id = file2id(filp); struct cx18 *cx = id->cx; long res; mutex_lock(&cx->serialize_lock); - /* FIXME - consolidate v4l2_prio_check()'s here */ - if (cx18_debug & CX18_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; res = video_ioctl2(filp, cmd, arg); @@ -1098,8 +1045,6 @@ long cx18_v4l2_ioctl(struct file *filp, unsigned int cmd, static const struct v4l2_ioctl_ops cx18_ioctl_ops = { .vidioc_querycap = cx18_querycap, - .vidioc_g_priority = cx18_g_priority, - .vidioc_s_priority = cx18_s_priority, .vidioc_s_audio = cx18_s_audio, .vidioc_g_audio = cx18_g_audio, .vidioc_enumaudio = cx18_enumaudio, @@ -1136,11 +1081,6 @@ static const struct v4l2_ioctl_ops cx18_ioctl_ops = { .vidioc_s_register = cx18_s_register, #endif .vidioc_default = cx18_default, - .vidioc_queryctrl = cx18_queryctrl, - .vidioc_querymenu = cx18_querymenu, - .vidioc_g_ext_ctrls = cx18_g_ext_ctrls, - .vidioc_s_ext_ctrls = cx18_s_ext_ctrls, - .vidioc_try_ext_ctrls = cx18_try_ext_ctrls, }; void cx18_set_funcs(struct video_device *vdev) diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index c545f3beef78..9605d54bd083 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -716,9 +716,8 @@ static int cx18_set_filter_param(struct cx18_stream *s) int cx18_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) { - struct cx18_api_func_private *api_priv = priv; - struct cx18 *cx = api_priv->cx; - struct cx18_stream *s = api_priv->s; + struct cx18_stream *s = priv; + struct cx18 *cx = s->cx; switch (cmd) { case CX2341X_ENC_SET_OUTPUT_PORT: diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h index 077952fcbcca..05fe6bdbe062 100644 --- a/drivers/media/video/cx18/cx18-mailbox.h +++ b/drivers/media/video/cx18/cx18-mailbox.h @@ -81,11 +81,6 @@ struct cx18_mailbox { struct cx18_stream; -struct cx18_api_func_private { - struct cx18 *cx; - struct cx18_stream *s; -}; - int cx18_api(struct cx18 *cx, u32 cmd, int args, u32 data[]); int cx18_vapi_result(struct cx18 *cx, u32 data[MAX_MB_ARGUMENTS], u32 cmd, int args, ...); diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 94f5d7967c5c..c6e2ca3b1149 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -207,6 +207,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) s->video_dev->fops = &cx18_v4l2_enc_fops; s->video_dev->release = video_device_release; s->video_dev->tvnorms = V4L2_STD_ALL; + set_bit(V4L2_FL_USE_FH_PRIO, &s->video_dev->flags); cx18_set_funcs(s->video_dev); return 0; } @@ -572,7 +573,7 @@ static void cx18_stream_configure_mdls(struct cx18_stream *s) * Set the MDL size to the exact size needed for one frame. * Use enough buffers per MDL to cover the MDL size */ - s->mdl_size = 720 * s->cx->params.height * 3 / 2; + s->mdl_size = 720 * s->cx->cxhdl.height * 3 / 2; s->bufs_per_mdl = s->mdl_size / s->buf_size; if (s->mdl_size % s->buf_size) s->bufs_per_mdl++; @@ -607,7 +608,6 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) u32 data[MAX_MB_ARGUMENTS]; struct cx18 *cx = s->cx; int captype = 0; - struct cx18_api_func_private priv; struct cx18_stream *s_idx; if (!cx18_stream_enabled(s)) @@ -620,7 +620,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) captype = CAPTURE_CHANNEL_TYPE_MPEG; cx->mpg_data_received = cx->vbi_data_inserted = 0; cx->dualwatch_jiffies = jiffies; - cx->dualwatch_stereo_mode = cx->params.audio_properties & 0x300; + cx->dualwatch_stereo_mode = v4l2_ctrl_g_ctrl(cx->cxhdl.audio_mode); cx->search_pack_header = 0; break; @@ -710,21 +710,21 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle, cx18_stream_enabled(s_idx) ? 7 : 0); /* Call out to the common CX2341x API setup for user controls */ - priv.cx = cx; - priv.s = s; - cx2341x_update(&priv, cx18_api_func, NULL, &cx->params); + cx->cxhdl.priv = s; + cx2341x_handler_setup(&cx->cxhdl); /* * When starting a capture and we're set for radio, * ensure the video is muted, despite the user control. */ - if (!cx->params.video_mute && + if (!cx->cxhdl.video_mute && test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, - (cx->params.video_mute_yuv << 8) | 1); + (v4l2_ctrl_g_ctrl(cx->cxhdl.video_mute_yuv) << 8) | 1); } if (atomic_read(&cx->tot_capturing) == 0) { + cx2341x_handler_set_busy(&cx->cxhdl, 1); clear_bit(CX18_F_I_EOS, &cx->i_flags); cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK); } @@ -826,6 +826,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) if (atomic_read(&cx->tot_capturing) > 0) return 0; + cx2341x_handler_set_busy(&cx->cxhdl, 0); cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); wake_up(&s->waitq); diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h index 7e40035028d2..935f557acbd0 100644 --- a/drivers/media/video/cx18/cx23418.h +++ b/drivers/media/video/cx18/cx23418.h @@ -477,7 +477,7 @@ /* The are no buffers ready. Try again soon! */ #define CXERR_NODATA_AGAIN 0x00001E -/* The stream is stopping. Function not alllowed now! */ +/* The stream is stopping. Function not allowed now! */ #define CXERR_STOPPING_STATUS 0x00001F /* Trying to access hardware when the power is turned OFF */ diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c index fc9526a5b746..f8f0e59cd583 100644 --- a/drivers/media/video/cx231xx/cx231xx-417.c +++ b/drivers/media/video/cx231xx/cx231xx-417.c @@ -942,13 +942,13 @@ static int cx231xx_load_firmware(struct cx231xx *dev) p_current_fw = vmalloc(1884180 * 4); p_fw = p_current_fw; - if (p_current_fw == 0) { + if (p_current_fw == NULL) { dprintk(2, "FAIL!!!\n"); return -1; } p_buffer = vmalloc(4096); - if (p_buffer == 0) { + if (p_buffer == NULL) { dprintk(2, "FAIL!!!\n"); return -1; } diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index c53e97295a0d..62843d39817c 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -759,11 +759,8 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev, case CX231XX_VMUX_TELEVISION: case CX231XX_VMUX_CABLE: default: - switch (dev->model) { - case CX231XX_BOARD_CNXT_CARRAERA: - case CX231XX_BOARD_CNXT_RDE_250: - case CX231XX_BOARD_CNXT_SHELBY: - case CX231XX_BOARD_CNXT_RDU_250: + /* TODO: Test if this is also needed for xc2028/xc3028 */ + if (dev->board.tuner_type == TUNER_XC5000) { /* Disable the use of DIF */ status = vid_blk_read_word(dev, AFE_CTRL, &value); @@ -820,8 +817,7 @@ int cx231xx_set_decoder_video_input(struct cx231xx *dev, MODE_CTRL, FLD_INPUT_MODE, cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0)); - break; - default: + } else { /* Enable the DIF for the tuner */ /* Reinitialize the DIF */ @@ -1275,6 +1271,8 @@ int cx231xx_enable_i2c_port_3(struct cx231xx *dev, bool is_port_3) int status = 0; bool current_is_port_3; + if (dev->board.dont_use_port_3) + is_port_3 = false; status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 4); if (status < 0) @@ -2550,7 +2548,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) case 4: /* ts1 */ cx231xx_info("%s: set ts1 registers", __func__); - if (dev->model == CX231XX_BOARD_CNXT_VIDEO_GRABBER) { + if (dev->board.has_417) { cx231xx_info(" MPEG\n"); value &= 0xFFFFFFFC; value |= 0x3; diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 588f3e8f028b..f49230d170e6 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -261,6 +261,9 @@ struct cx231xx_board cx231xx_boards[] = { .agc_analog_digital_select_gpio = 0x1c, .gpio_pin_status_mask = 0x4001000, .norm = V4L2_STD_PAL, + .no_alt_vanc = 1, + .external_av = 1, + .has_417 = 1, .input = {{ .type = CX231XX_VMUX_COMPOSITE1, @@ -357,19 +360,19 @@ struct cx231xx_board cx231xx_boards[] = { .type = CX231XX_VMUX_TELEVISION, .vmux = CX231XX_VIN_3_1, .amux = CX231XX_AMUX_VIDEO, - .gpio = 0, + .gpio = NULL, }, { .type = CX231XX_VMUX_COMPOSITE1, .vmux = CX231XX_VIN_2_1, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, }, { .type = CX231XX_VMUX_SVIDEO, .vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8) | CX25840_SVIDEO_ON, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, } }, }, [CX231XX_BOARD_HAUPPAUGE_USBLIVE2] = { @@ -382,18 +385,20 @@ struct cx231xx_board cx231xx_boards[] = { .agc_analog_digital_select_gpio = 0x0c, .gpio_pin_status_mask = 0x4001000, .norm = V4L2_STD_NTSC, + .no_alt_vanc = 1, + .external_av = 1, .input = {{ .type = CX231XX_VMUX_COMPOSITE1, .vmux = CX231XX_VIN_2_1, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, }, { .type = CX231XX_VMUX_SVIDEO, .vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8) | CX25840_SVIDEO_ON, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, } }, }, [CX231XX_BOARD_PV_PLAYTV_USB_HYBRID] = { @@ -420,21 +425,50 @@ struct cx231xx_board cx231xx_boards[] = { .type = CX231XX_VMUX_TELEVISION, .vmux = CX231XX_VIN_3_1, .amux = CX231XX_AMUX_VIDEO, - .gpio = 0, + .gpio = NULL, }, { .type = CX231XX_VMUX_COMPOSITE1, .vmux = CX231XX_VIN_2_1, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, }, { .type = CX231XX_VMUX_SVIDEO, .vmux = CX231XX_VIN_1_1 | (CX231XX_VIN_1_2 << 8) | CX25840_SVIDEO_ON, .amux = CX231XX_AMUX_LINE_IN, - .gpio = 0, + .gpio = NULL, } }, }, + [CX231XX_BOARD_PV_XCAPTURE_USB] = { + .name = "Pixelview Xcapture USB", + .tuner_type = TUNER_ABSENT, + .decoder = CX231XX_AVDECODER, + .output_mode = OUT_MODE_VIP11, + .demod_xfer_mode = 0, + .ctl_pin_status_mask = 0xFFFFFFC4, + .agc_analog_digital_select_gpio = 0x0c, + .gpio_pin_status_mask = 0x4001000, + .norm = V4L2_STD_NTSC, + .no_alt_vanc = 1, + .external_av = 1, + .dont_use_port_3 = 1, + + .input = {{ + .type = CX231XX_VMUX_COMPOSITE1, + .vmux = CX231XX_VIN_2_1, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_SVIDEO, + .vmux = CX231XX_VIN_1_1 | + (CX231XX_VIN_1_2 << 8) | + CX25840_SVIDEO_ON, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + } + }, + }, }; const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards); @@ -464,6 +498,8 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_HAUPPAUGE_USBLIVE2}, {USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000, 0x4001), .driver_info = CX231XX_BOARD_PV_PLAYTV_USB_HYBRID}, + {USB_DEVICE(USB_VID_PIXELVIEW, 0x5014), + .driver_info = CX231XX_BOARD_PV_XCAPTURE_USB}, {}, }; @@ -772,7 +808,7 @@ static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev, /* Reset other chips required if they are tied up with GPIO pins */ cx231xx_add_into_devlist(dev); - if (dev->model == CX231XX_BOARD_CNXT_VIDEO_GRABBER) { + if (dev->board.has_417) { printk(KERN_INFO "attach 417 %d\n", dev->model); if (cx231xx_417_register(dev) < 0) { printk(KERN_ERR @@ -844,110 +880,110 @@ static int cx231xx_usb_probe(struct usb_interface *interface, udev = usb_get_dev(interface_to_usbdev(interface)); ifnum = interface->altsetting[0].desc.bInterfaceNumber; - if (ifnum == 1) { - /* - * Interface number 0 - IR interface - */ - /* Check to see next free device and mark as used */ - nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS); - cx231xx_devused |= 1 << nr; - - if (nr >= CX231XX_MAXBOARDS) { - cx231xx_err(DRIVER_NAME - ": Supports only %i cx231xx boards.\n", CX231XX_MAXBOARDS); - cx231xx_devused &= ~(1 << nr); - return -ENOMEM; - } - - /* allocate memory for our device state and initialize it */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (dev == NULL) { - cx231xx_err(DRIVER_NAME ": out of memory!\n"); - cx231xx_devused &= ~(1 << nr); - return -ENOMEM; - } - - snprintf(dev->name, 29, "cx231xx #%d", nr); - dev->devno = nr; - dev->model = id->driver_info; - dev->video_mode.alt = -1; - dev->interface_count++; - - /* reset gpio dir and value */ - dev->gpio_dir = 0; - dev->gpio_val = 0; - dev->xc_fw_load_done = 0; - dev->has_alsa_audio = 1; - dev->power_mode = -1; - atomic_set(&dev->devlist_count, 0); - - /* 0 - vbi ; 1 -sliced cc mode */ - dev->vbi_or_sliced_cc_mode = 0; - - /* get maximum no.of IAD interfaces */ - assoc_desc = udev->actconfig->intf_assoc[0]; - dev->max_iad_interface_count = assoc_desc->bInterfaceCount; - - /* init CIR module TBD */ + /* + * Interface number 0 - IR interface (handled by mceusb driver) + * Interface number 1 - AV interface (handled by this driver) + */ + if (ifnum != 1) + return -ENODEV; - /* store the current interface */ - lif = interface; + /* Check to see next free device and mark as used */ + nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS); + cx231xx_devused |= 1 << nr; - /*mode_tv: digital=1 or analog=0*/ - dev->mode_tv = 0; + if (nr >= CX231XX_MAXBOARDS) { + cx231xx_err(DRIVER_NAME + ": Supports only %i cx231xx boards.\n", CX231XX_MAXBOARDS); + cx231xx_devused &= ~(1 << nr); + return -ENOMEM; + } - dev->USE_ISO = transfer_mode; + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + cx231xx_err(DRIVER_NAME ": out of memory!\n"); + cx231xx_devused &= ~(1 << nr); + return -ENOMEM; + } - switch (udev->speed) { - case USB_SPEED_LOW: - speed = "1.5"; - break; - case USB_SPEED_UNKNOWN: - case USB_SPEED_FULL: - speed = "12"; - break; - case USB_SPEED_HIGH: - speed = "480"; - break; - default: - speed = "unknown"; - } + snprintf(dev->name, 29, "cx231xx #%d", nr); + dev->devno = nr; + dev->model = id->driver_info; + dev->video_mode.alt = -1; + + dev->interface_count++; + /* reset gpio dir and value */ + dev->gpio_dir = 0; + dev->gpio_val = 0; + dev->xc_fw_load_done = 0; + dev->has_alsa_audio = 1; + dev->power_mode = -1; + atomic_set(&dev->devlist_count, 0); + + /* 0 - vbi ; 1 -sliced cc mode */ + dev->vbi_or_sliced_cc_mode = 0; + + /* get maximum no.of IAD interfaces */ + assoc_desc = udev->actconfig->intf_assoc[0]; + dev->max_iad_interface_count = assoc_desc->bInterfaceCount; + + /* init CIR module TBD */ + + /* store the current interface */ + lif = interface; + + /*mode_tv: digital=1 or analog=0*/ + dev->mode_tv = 0; + + dev->USE_ISO = transfer_mode; + + switch (udev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } - if (udev->manufacturer) - strlcpy(descr, udev->manufacturer, sizeof(descr)); + if (udev->manufacturer) + strlcpy(descr, udev->manufacturer, sizeof(descr)); - if (udev->product) { - if (*descr) - strlcat(descr, " ", sizeof(descr)); - strlcat(descr, udev->product, sizeof(descr)); - } + if (udev->product) { if (*descr) strlcat(descr, " ", sizeof(descr)); - - cx231xx_info("New device %s@ %s Mbps " - "(%04x:%04x) with %d interfaces\n", - descr, - speed, - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - dev->max_iad_interface_count); - - /* store the interface 0 back */ - lif = udev->actconfig->interface[0]; - - /* increment interface count */ - dev->interface_count++; - - /* get device number */ - nr = dev->devno; - - assoc_desc = udev->actconfig->intf_assoc[0]; - if (assoc_desc->bFirstInterface != ifnum) { - cx231xx_err(DRIVER_NAME ": Not found " - "matching IAD interface\n"); - return -ENODEV; - } - } else { + strlcat(descr, udev->product, sizeof(descr)); + } + if (*descr) + strlcat(descr, " ", sizeof(descr)); + + cx231xx_info("New device %s@ %s Mbps " + "(%04x:%04x) with %d interfaces\n", + descr, + speed, + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + dev->max_iad_interface_count); + + /* store the interface 0 back */ + lif = udev->actconfig->interface[0]; + + /* increment interface count */ + dev->interface_count++; + + /* get device number */ + nr = dev->devno; + + assoc_desc = udev->actconfig->intf_assoc[0]; + if (assoc_desc->bFirstInterface != ifnum) { + cx231xx_err(DRIVER_NAME ": Not found " + "matching IAD interface\n"); return -ENODEV; } diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c index 7d62d58617f5..abe500feb7dd 100644 --- a/drivers/media/video/cx231xx/cx231xx-core.c +++ b/drivers/media/video/cx231xx/cx231xx-core.c @@ -571,6 +571,8 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) alt]; break; case INDEX_VANC: + if (dev->board.no_alt_vanc) + return 0; usb_interface_index = dev->current_pcb_config.hs_config_info[0].interface_info. vanc_index + 1; @@ -600,8 +602,7 @@ int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) usb_interface_index, alt); /*To workaround error number=-71 on EP0 for videograbber, need add following codes.*/ - if (dev->model != CX231XX_BOARD_CNXT_VIDEO_GRABBER && - dev->model != CX231XX_BOARD_HAUPPAUGE_USBLIVE2) + if (dev->board.no_alt_vanc) return -1; } @@ -1301,8 +1302,7 @@ int cx231xx_dev_init(struct cx231xx *dev) /* init hardware */ /* Note : with out calling set power mode function, afe can not be set up correctly */ - if (dev->model == CX231XX_BOARD_CNXT_VIDEO_GRABBER || - dev->model == CX231XX_BOARD_HAUPPAUGE_USBLIVE2) { + if (dev->board.external_av) { errCode = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ENXTERNAL_AV); if (errCode < 0) { @@ -1322,11 +1322,9 @@ int cx231xx_dev_init(struct cx231xx *dev) } } - /* reset the Tuner */ - if ((dev->model == CX231XX_BOARD_CNXT_CARRAERA) || - (dev->model == CX231XX_BOARD_CNXT_RDE_250) || - (dev->model == CX231XX_BOARD_CNXT_SHELBY) || - (dev->model == CX231XX_BOARD_CNXT_RDU_250)) + /* reset the Tuner, if it is a Xceive tuner */ + if ((dev->board.tuner_type == TUNER_XC5000) || + (dev->board.tuner_type == TUNER_XC2028)) cx231xx_gpio_set(dev, dev->board.tuner_gpio); /* initialize Colibri block */ diff --git a/drivers/media/video/cx231xx/cx231xx-i2c.c b/drivers/media/video/cx231xx/cx231xx-i2c.c index 835670623dfb..925f3a04e53c 100644 --- a/drivers/media/video/cx231xx/cx231xx-i2c.c +++ b/drivers/media/video/cx231xx/cx231xx-i2c.c @@ -54,6 +54,21 @@ do { \ } \ } while (0) +static inline bool is_tuner(struct cx231xx *dev, struct cx231xx_i2c *bus, + const struct i2c_msg *msg, int tuner_type) +{ + if (bus->nr != dev->board.tuner_i2c_master) + return false; + + if (msg->addr != dev->board.tuner_addr) + return false; + + if (dev->tuner_type != tuner_type) + return false; + + return true; +} + /* * cx231xx_i2c_send_bytes() */ @@ -71,9 +86,7 @@ int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap, u16 saddr = 0; u8 need_gpio = 0; - if ((bus->nr == 1) && (msg->addr == 0x61) - && (dev->tuner_type == TUNER_XC5000)) { - + if (is_tuner(dev, bus, msg, TUNER_XC5000)) { size = msg->len; if (size == 2) { /* register write sub addr */ @@ -180,9 +193,7 @@ static int cx231xx_i2c_recv_bytes(struct i2c_adapter *i2c_adap, u16 saddr = 0; u8 need_gpio = 0; - if ((bus->nr == 1) && (msg->addr == 0x61) - && dev->tuner_type == TUNER_XC5000) { - + if (is_tuner(dev, bus, msg, TUNER_XC5000)) { if (msg->len == 2) saddr = msg->buf[0] << 8 | msg->buf[1]; else if (msg->len == 1) @@ -274,9 +285,7 @@ static int cx231xx_i2c_recv_bytes_with_saddr(struct i2c_adapter *i2c_adap, else if (msg1->len == 1) saddr = msg1->buf[0]; - if ((bus->nr == 1) && (msg2->addr == 0x61) - && dev->tuner_type == TUNER_XC5000) { - + if (is_tuner(dev, bus, msg2, TUNER_XC5000)) { if ((msg2->len < 16)) { dprintk1(1, @@ -454,8 +463,8 @@ static char *i2c_devs[128] = { [0x32 >> 1] = "GeminiIII", [0x02 >> 1] = "Aquarius", [0xa0 >> 1] = "eeprom", - [0xc0 >> 1] = "tuner/XC3028", - [0xc2 >> 1] = "tuner/XC5000", + [0xc0 >> 1] = "tuner", + [0xc2 >> 1] = "tuner", }; /* diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index 7e3e8c4f19b7..ffd5af914c44 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -2190,8 +2190,7 @@ static int cx231xx_v4l2_open(struct file *filp) dev->height = norm_maxh(dev); /* Power up in Analog TV mode */ - if (dev->model == CX231XX_BOARD_CNXT_VIDEO_GRABBER || - dev->model == CX231XX_BOARD_HAUPPAUGE_USBLIVE2) + if (dev->board.external_av) cx231xx_set_power_mode(dev, POLARIS_AVMODE_ENXTERNAL_AV); else @@ -2231,9 +2230,7 @@ static int cx231xx_v4l2_open(struct file *filp) if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { /* Set the required alternate setting VBI interface works in Bulk mode only */ - if (dev->model != CX231XX_BOARD_CNXT_VIDEO_GRABBER && - dev->model != CX231XX_BOARD_HAUPPAUGE_USBLIVE2) - cx231xx_set_alt_setting(dev, INDEX_VANC, 0); + cx231xx_set_alt_setting(dev, INDEX_VANC, 0); videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_vbi_qops, NULL, &dev->vbi_mode.slock, @@ -2275,7 +2272,7 @@ void cx231xx_release_analog_resources(struct cx231xx *dev) cx231xx_info("V4L2 device %s deregistered\n", video_device_node_name(dev->vdev)); - if (dev->model == CX231XX_BOARD_CNXT_VIDEO_GRABBER) + if (dev->board.has_417) cx231xx_417_unregister(dev); if (video_is_registered(dev->vdev)) @@ -2302,10 +2299,13 @@ static int cx231xx_v4l2_close(struct file *filp) if (res_check(fh)) res_free(fh); - /*To workaround error number=-71 on EP0 for VideoGrabber, - need exclude following.*/ - if (dev->model != CX231XX_BOARD_CNXT_VIDEO_GRABBER && - dev->model != CX231XX_BOARD_HAUPPAUGE_USBLIVE2) + /* + * To workaround error number=-71 on EP0 for VideoGrabber, + * need exclude following. + * FIXME: It is probably safe to remove most of these, as we're + * now avoiding the alternate setting for INDEX_VANC + */ + if (!dev->board.no_alt_vanc) if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { videobuf_stop(&fh->vb_vidq); videobuf_mmap_free(&fh->vb_vidq); diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h index 72bbea2bcd56..bd4a9cf29577 100644 --- a/drivers/media/video/cx231xx/cx231xx.h +++ b/drivers/media/video/cx231xx/cx231xx.h @@ -64,6 +64,7 @@ #define CX231XX_BOARD_HAUPPAUGE_EXETER 8 #define CX231XX_BOARD_HAUPPAUGE_USBLIVE2 9 #define CX231XX_BOARD_PV_PLAYTV_USB_HYBRID 10 +#define CX231XX_BOARD_PV_XCAPTURE_USB 11 /* Limits minimum and default number of buffers */ #define CX231XX_MIN_BUF 4 @@ -353,7 +354,11 @@ struct cx231xx_board { unsigned int max_range_640_480:1; unsigned int has_dvb:1; + unsigned int has_417:1; unsigned int valid:1; + unsigned int no_alt_vanc:1; + unsigned int external_av:1; + unsigned int dont_use_port_3:1; unsigned char xclk, i2c_speed; @@ -464,7 +469,7 @@ struct cx231xx_fh { #define I2C_STOP 0x0 /* 1-- do not transmit STOP at end of transaction */ #define I2C_NOSTOP 0x1 -/* 1--alllow slave to insert clock wait states */ +/* 1--allow slave to insert clock wait states */ #define I2C_SYNC 0x1 struct cx231xx_i2c { diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 6b4a516addfe..3b6e7f28568e 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -1,6 +1,7 @@ config VIDEO_CX23885 tristate "Conexant cx23885 (2388x successor) support" - depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT + depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND + select SND_PCM select I2C_ALGOBIT select VIDEO_BTCX select VIDEO_TUNER @@ -33,3 +34,12 @@ config VIDEO_CX23885 To compile this driver as a module, choose M here: the module will be called cx23885 +config MEDIA_ALTERA_CI + tristate "Altera FPGA based CI module" + depends on VIDEO_CX23885 && DVB_CORE + select STAPL_ALTERA + ---help--- + An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. + + To compile this driver as a module, choose M here: the + module will be called altera-ci diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile index e2ee95f660d8..23293c7b6ac7 100644 --- a/drivers/media/video/cx23885/Makefile +++ b/drivers/media/video/cx23885/Makefile @@ -5,6 +5,7 @@ cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \ cx23885-f300.o obj-$(CONFIG_VIDEO_CX23885) += cx23885.o +obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o EXTRA_CFLAGS += -Idrivers/media/video EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/cx23885/altera-ci.c b/drivers/media/video/cx23885/altera-ci.c new file mode 100644 index 000000000000..678539b2acfa --- /dev/null +++ b/drivers/media/video/cx23885/altera-ci.c @@ -0,0 +1,838 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * currently cx23885 GPIO's used. + * GPIO-0 ~INT in + * GPIO-1 TMS out + * GPIO-2 ~reset chips out + * GPIO-3 to GPIO-10 data/addr for CA in/out + * GPIO-11 ~CS out + * GPIO-12 AD_RG out + * GPIO-13 ~WR out + * GPIO-14 ~RD out + * GPIO-15 ~RDY in + * GPIO-16 TCK out + * GPIO-17 TDO in + * GPIO-18 TDI out + */ +/* + * Bit definitions for MC417_RWD and MC417_OEN registers + * bits 31-16 + * +-----------+ + * | Reserved | + * +-----------+ + * bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | TDI | TDO | TCK | RDY# | #RD | #WR | AD_RG | #CS | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#include <linux/version.h> +#include <media/videobuf-dma-sg.h> +#include <media/videobuf-dvb.h> +#include "altera-ci.h" +#include "dvb_ca_en50221.h" + +/* FPGA regs */ +#define NETUP_CI_INT_CTRL 0x00 +#define NETUP_CI_BUSCTRL2 0x01 +#define NETUP_CI_ADDR0 0x04 +#define NETUP_CI_ADDR1 0x05 +#define NETUP_CI_DATA 0x06 +#define NETUP_CI_BUSCTRL 0x07 +#define NETUP_CI_PID_ADDR0 0x08 +#define NETUP_CI_PID_ADDR1 0x09 +#define NETUP_CI_PID_DATA 0x0a +#define NETUP_CI_TSA_DIV 0x0c +#define NETUP_CI_TSB_DIV 0x0d +#define NETUP_CI_REVISION 0x0f + +/* const for ci op */ +#define NETUP_CI_FLG_CTL 1 +#define NETUP_CI_FLG_RD 1 +#define NETUP_CI_FLG_AD 1 + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +static unsigned int pid_dbg; +module_param(pid_dbg, int, 0644); +MODULE_PARM_DESC(pid_dbg, "Enable PID filtering debugging"); + +MODULE_DESCRIPTION("altera FPGA CI module"); +MODULE_AUTHOR("Igor M. Liplianin <liplianin@netup.ru>"); +MODULE_LICENSE("GPL"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define pid_dbg_print(args...) \ + do { \ + if (pid_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +struct altera_ci_state; +struct netup_hw_pid_filter; + +struct fpga_internal { + void *dev; + struct mutex fpga_mutex;/* two CI's on the same fpga */ + struct netup_hw_pid_filter *pid_filt[2]; + struct altera_ci_state *state[2]; + struct work_struct work; + int (*fpga_rw) (void *dev, int flag, int data, int rw); + int cis_used; + int filts_used; + int strt_wrk; +}; + +/* stores all private variables for communication with CI */ +struct altera_ci_state { + struct fpga_internal *internal; + struct dvb_ca_en50221 ca; + int status; + int nr; +}; + +/* stores all private variables for hardware pid filtering */ +struct netup_hw_pid_filter { + struct fpga_internal *internal; + struct dvb_demux *demux; + /* save old functions */ + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + + int status; + int nr; +}; + +/* internal params node */ +struct fpga_inode { + /* pointer for internal params, one for each pair of CI's */ + struct fpga_internal *internal; + struct fpga_inode *next_inode; +}; + +/* first internal params */ +static struct fpga_inode *fpga_first_inode; + +/* find chip by dev */ +static struct fpga_inode *find_inode(void *dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + + if (temp_chip == NULL) + return temp_chip; + + /* + Search for the last fpga CI chip or + find it by dev */ + while ((temp_chip != NULL) && + (temp_chip->internal->dev != dev)) + temp_chip = temp_chip->next_inode; + + return temp_chip; +} +/* check demux */ +static struct fpga_internal *check_filter(struct fpga_internal *temp_int, + void *demux_dev, int filt_nr) +{ + if (temp_int == NULL) + return NULL; + + if ((temp_int->pid_filt[filt_nr]) == NULL) + return NULL; + + if (temp_int->pid_filt[filt_nr]->demux == demux_dev) + return temp_int; + + return NULL; +} + +/* find chip by demux */ +static struct fpga_inode *find_dinode(void *demux_dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + struct fpga_internal *temp_int; + + /* + * Search of the last fpga CI chip or + * find it by demux + */ + while (temp_chip != NULL) { + if (temp_chip->internal != NULL) { + temp_int = temp_chip->internal; + if (check_filter(temp_int, demux_dev, 0)) + break; + if (check_filter(temp_int, demux_dev, 1)) + break; + } + + temp_chip = temp_chip->next_inode; + } + + return temp_chip; +} + +/* deallocating chip */ +static void remove_inode(struct fpga_internal *internal) +{ + struct fpga_inode *prev_node = fpga_first_inode; + struct fpga_inode *del_node = find_inode(internal->dev); + + if (del_node != NULL) { + if (del_node == fpga_first_inode) { + fpga_first_inode = del_node->next_inode; + } else { + while (prev_node->next_inode != del_node) + prev_node = prev_node->next_inode; + + if (del_node->next_inode == NULL) + prev_node->next_inode = NULL; + else + prev_node->next_inode = + prev_node->next_inode->next_inode; + } + + kfree(del_node); + } +} + +/* allocating new chip */ +static struct fpga_inode *append_internal(struct fpga_internal *internal) +{ + struct fpga_inode *new_node = fpga_first_inode; + + if (new_node == NULL) { + new_node = kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + fpga_first_inode = new_node; + } else { + while (new_node->next_inode != NULL) + new_node = new_node->next_inode; + + new_node->next_inode = + kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + if (new_node->next_inode != NULL) + new_node = new_node->next_inode; + else + new_node = NULL; + } + + if (new_node != NULL) { + new_node->internal = internal; + new_node->next_inode = NULL; + } + + return new_node; +} + +static int netup_fpga_op_rw(struct fpga_internal *inter, int addr, + u8 val, u8 read) +{ + inter->fpga_rw(inter->dev, NETUP_CI_FLG_AD, addr, 0); + return inter->fpga_rw(inter->dev, 0, val, read); +} + +/* flag - mem/io, read - read/write */ +int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 val) +{ + + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + + u8 store; + int mem = 0; + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_ADDR0, ((addr << 1) & 0xfe), 0); + netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0); + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + store &= 0x0f; + store |= ((state->nr << 7) | (flag << 6)); + + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0); + mem = netup_fpga_op_rw(inter, NETUP_CI_DATA, val, read); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", addr, + (flag == NETUP_CI_FLG_CTL) ? "ctl" : "mem", + (read) ? mem : val); + + return mem; +} + +int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0); +} + +int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, + NETUP_CI_FLG_RD, addr, 0); +} + +int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data); +} + +int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + /* reasonable timeout for CI reset is 10 seconds */ + unsigned long t_out = jiffies + msecs_to_jiffies(9999); + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0xcf) | (1 << (5 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + for (;;) { + mdelay(50); + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + 0, NETUP_CI_FLG_RD); + mutex_unlock(&inter->fpga_mutex); + + if ((ret & (1 << (5 - state->nr))) == 0) + break; + if (time_after(jiffies, t_out)) + break; + } + + + ci_dbg_print("%s: %d msecs\n", __func__, + jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out)); + + return 0; +} + +int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0x0f) | (1 << (3 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct fpga_internal *inter = + container_of(work, struct fpga_internal, work); + int ret; + + ci_dbg_print("%s\n", __func__); + + mutex_lock(&inter->fpga_mutex); + /* ack' irq */ + ret = netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0, NETUP_CI_FLG_RD); + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + mutex_unlock(&inter->fpga_mutex); + + if (inter->state[1] != NULL) { + inter->state[1]->status = + ((ret & 1) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[1] status = 0x%x\n", + __func__, inter->state[1]->status); + }; + + if (inter->state[0] != NULL) { + inter->state[0]->status = + ((ret & 2) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[0] status = 0x%x\n", + __func__, inter->state[0]->status); + }; +} + +/* CI irq handler */ +int altera_ci_irq(void *dev) +{ + struct fpga_inode *temp_int = NULL; + struct fpga_internal *inter = NULL; + + ci_dbg_print("%s\n", __func__); + + if (dev != NULL) { + temp_int = find_inode(dev); + if (temp_int != NULL) { + inter = temp_int->internal; + schedule_work(&inter->work); + } + } + + return 1; +} +EXPORT_SYMBOL(altera_ci_irq); + +int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, + int open) +{ + struct altera_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + return state->status; +} + +void altera_hw_filt_release(void *main_dev, int filt_nr) +{ + struct fpga_inode *temp_int = find_inode(main_dev); + struct netup_hw_pid_filter *pid_filt = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + pid_filt = temp_int->internal->pid_filt[filt_nr - 1]; + /* stored old feed controls */ + pid_filt->demux->start_feed = pid_filt->start_feed; + pid_filt->demux->stop_feed = pid_filt->stop_feed; + + if (((--(temp_int->internal->filts_used)) <= 0) && + ((temp_int->internal->cis_used) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(pid_filt->internal); + } + + kfree(pid_filt); + + } + +} +EXPORT_SYMBOL(altera_hw_filt_release); + +void altera_ci_release(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct altera_ci_state *state = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + state = temp_int->internal->state[ci_nr - 1]; + altera_hw_filt_release(dev, ci_nr); + + + if (((temp_int->internal->filts_used) <= 0) && + ((--(temp_int->internal->cis_used)) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(state->internal); + } + + if (state != NULL) { + if (state->ca.data != NULL) + dvb_ca_en50221_release(&state->ca); + + kfree(state); + } + } + +} +EXPORT_SYMBOL(altera_ci_release); + +static void altera_pid_control(struct netup_hw_pid_filter *pid_filt, + u16 pid, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + + /* pid 0-0x1f always enabled, don't touch them */ + if ((pid == 0x2000) || (pid < 0x20)) + return; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, (pid >> 3) & 0xff, 0); + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((pid >> 11) & 0x03) | (pid_filt->nr << 2), 0); + + store = netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, 0, NETUP_CI_FLG_RD); + + if (onoff)/* 0 - on, 1 - off */ + store |= (1 << (pid & 7)); + else + store &= ~(1 << (pid & 7)); + + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + pid_dbg_print("%s: (%d) set pid: %5d 0x%04x '%s'\n", __func__, + pid_filt->nr, pid, pid, onoff ? "off" : "on"); +} + +static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt, + int filt_nr, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + int i; + + pid_dbg_print("%s: pid_filt->nr[%d] now %s\n", __func__, pid_filt->nr, + onoff ? "off" : "on"); + + if (onoff)/* 0 - on, 1 - off */ + store = 0xff;/* ignore pid */ + else + store = 0;/* enable pid */ + + mutex_lock(&inter->fpga_mutex); + + for (i = 0; i < 1024; i++) { + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, i & 0xff, 0); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((i >> 8) & 0x03) | (pid_filt->nr << 2), 0); + /* pid 0-0x1f always enabled */ + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, + (i > 3 ? store : 0), 0); + } + + mutex_unlock(&inter->fpga_mutex); +} + +int altera_pid_feed_control(void *demux_dev, int filt_nr, + struct dvb_demux_feed *feed, int onoff) +{ + struct fpga_inode *temp_int = find_dinode(demux_dev); + struct fpga_internal *inter = temp_int->internal; + struct netup_hw_pid_filter *pid_filt = inter->pid_filt[filt_nr - 1]; + + altera_pid_control(pid_filt, feed->pid, onoff ? 0 : 1); + /* call old feed proc's */ + if (onoff) + pid_filt->start_feed(feed); + else + pid_filt->stop_feed(feed); + + if (feed->pid == 0x2000) + altera_toggle_fullts_streaming(pid_filt, filt_nr, + onoff ? 0 : 1); + + return 0; +} +EXPORT_SYMBOL(altera_pid_feed_control); + +int altera_ci_start_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 1); + + return 0; +} + +int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 0); + + return 0; +} + +int altera_ci_start_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 1); +} + +int altera_ci_stop_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 1); +} + +int altera_ci_start_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 2); +} + +int altera_ci_stop_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 2); +} + +int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr) +{ + struct netup_hw_pid_filter *pid_filt = NULL; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + + pid_filt = kzalloc(sizeof(struct netup_hw_pid_filter), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!pid_filt) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->filts_used)++; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->filts_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting hw pid filter = %p for ci = %d\n", __func__, + pid_filt, hw_filt_nr - 1); + inter->pid_filt[hw_filt_nr - 1] = pid_filt; + pid_filt->demux = config->demux; + pid_filt->internal = inter; + pid_filt->nr = hw_filt_nr - 1; + /* store old feed controls */ + pid_filt->start_feed = config->demux->start_feed; + pid_filt->stop_feed = config->demux->stop_feed; + /* replace with new feed controls */ + if (hw_filt_nr == 1) { + pid_filt->demux->start_feed = altera_ci_start_feed_1; + pid_filt->demux->stop_feed = altera_ci_stop_feed_1; + } else if (hw_filt_nr == 2) { + pid_filt->demux->start_feed = altera_ci_start_feed_2; + pid_filt->demux->stop_feed = altera_ci_stop_feed_2; + } + + altera_toggle_fullts_streaming(pid_filt, 0, 1); + + return 0; +err: + ci_dbg_print("%s: Can't init hardware filter: Error %d\n", + __func__, ret); + + kfree(pid_filt); + + return ret; +} +EXPORT_SYMBOL(altera_hw_filt_init); + +int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + struct altera_ci_state *state; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + u8 store = 0; + + state = kzalloc(sizeof(struct altera_ci_state), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!state) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->cis_used)++; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->cis_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__, + state, ci_nr - 1); + inter->state[ci_nr - 1] = state; + state->internal = inter; + state->nr = ci_nr - 1; + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = altera_ci_read_attribute_mem; + state->ca.write_attribute_mem = altera_ci_write_attribute_mem; + state->ca.read_cam_control = altera_ci_read_cam_ctl; + state->ca.write_cam_control = altera_ci_write_cam_ctl; + state->ca.slot_reset = altera_ci_slot_reset; + state->ca.slot_shutdown = altera_ci_slot_shutdown; + state->ca.slot_ts_enable = altera_ci_slot_ts_ctl; + state->ca.poll_slot_status = altera_poll_ci_slot_status; + state->ca.data = state; + + ret = dvb_ca_en50221_init(config->adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + altera_hw_filt_init(config, ci_nr); + + if (inter->strt_wrk) { + INIT_WORK(&inter->work, netup_read_ci_status); + inter->strt_wrk = 0; + } + + ci_dbg_print("%s: CI initialized!\n", __func__); + + mutex_lock(&inter->fpga_mutex); + + /* Enable div */ + netup_fpga_op_rw(inter, NETUP_CI_TSA_DIV, 0x0, 0); + netup_fpga_op_rw(inter, NETUP_CI_TSB_DIV, 0x0, 0); + + /* enable TS out */ + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store |= (3 << 4); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + ret = netup_fpga_op_rw(inter, NETUP_CI_REVISION, 0, NETUP_CI_FLG_RD); + /* enable irq */ + netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0x44, 0); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: NetUP CI Revision = 0x%x\n", __func__, ret); + + schedule_work(&inter->work); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + + kfree(state); + + return ret; +} +EXPORT_SYMBOL(altera_ci_init); + +int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct fpga_internal *inter = NULL; + u8 store; + + ci_dbg_print("%s\n", __func__); + + if (temp_int == NULL) + return -1; + + if (temp_int->internal == NULL) + return -1; + + inter = temp_int->internal; + + mutex_lock(&inter->fpga_mutex); + + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store &= ~(4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + msleep(100); + store |= (4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} +EXPORT_SYMBOL(altera_ci_tuner_reset); diff --git a/drivers/media/video/cx23885/altera-ci.h b/drivers/media/video/cx23885/altera-ci.h new file mode 100644 index 000000000000..70e4fd69ad9e --- /dev/null +++ b/drivers/media/video/cx23885/altera-ci.h @@ -0,0 +1,100 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010 NetUP Inc. + * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ALTERA_CI_H +#define __ALTERA_CI_H + +#define ALT_DATA 0x000000ff +#define ALT_TDI 0x00008000 +#define ALT_TDO 0x00004000 +#define ALT_TCK 0x00002000 +#define ALT_RDY 0x00001000 +#define ALT_RD 0x00000800 +#define ALT_WR 0x00000400 +#define ALT_AD_RG 0x00000200 +#define ALT_CS 0x00000100 + +struct altera_ci_config { + void *dev;/* main dev, for example cx23885_dev */ + void *adapter;/* for CI to connect to */ + struct dvb_demux *demux;/* for hardware PID filter to connect to */ + int (*fpga_rw) (void *dev, int ad_rg, int val, int rw); +}; + +#if defined(CONFIG_MEDIA_ALTERA_CI) || (defined(CONFIG_MEDIA_ALTERA_CI_MODULE) \ + && defined(MODULE)) + +extern int altera_ci_init(struct altera_ci_config *config, int ci_nr); +extern void altera_ci_release(void *dev, int ci_nr); +extern int altera_ci_irq(void *dev); +extern int altera_ci_tuner_reset(void *dev, int ci_nr); + +#else + +static inline int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_ci_release(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_ci_irq(void *dev) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif +#if 0 +static inline int altera_hw_filt_init(struct altera_ci_config *config, + int hw_filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_hw_filt_release(void *dev, int filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_pid_feed_control(void *dev, int filt_nr, + struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif /* CONFIG_MEDIA_ALTERA_CI */ + +#endif /* __ALTERA_CI_H */ diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index b298b730943c..ea88722cb4ab 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -24,10 +24,14 @@ #include <linux/pci.h> #include <linux/delay.h> #include <media/cx25840.h> +#include <linux/firmware.h> +#include <staging/altera.h> #include "cx23885.h" #include "tuner-xc2028.h" #include "netup-init.h" +#include "altera-ci.h" +#include "xc5000.h" #include "cx23888-ir.h" static unsigned int enable_885_ir; @@ -90,6 +94,7 @@ struct cx23885_board cx23885_boards[] = { .portc = CX23885_MPEG_DVB, .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, .input = {{ .type = CX23885_VMUX_TELEVISION, .vmux = CX25840_VIN7_CH3 | @@ -187,7 +192,7 @@ struct cx23885_board cx23885_boards[] = { .portb = CX23885_MPEG_DVB, }, [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { - .cimax = 1, + .ci_type = 1, .name = "NetUP Dual DVB-S2 CI", .portb = CX23885_MPEG_DVB, .portc = CX23885_MPEG_DVB, @@ -212,6 +217,7 @@ struct cx23885_board cx23885_boards[] = { .name = "Mygica X8506 DMB-TH", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = { @@ -241,6 +247,7 @@ struct cx23885_board cx23885_boards[] = { .name = "Magic-Pro ProHDTV Extreme 2", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = { @@ -289,6 +296,7 @@ struct cx23885_board cx23885_boards[] = { .porta = CX23885_ANALOG_VIDEO, .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, + .tuner_bus = 1, .input = {{ .type = CX23885_VMUX_TELEVISION, .vmux = CX25840_VIN2_CH1 | @@ -313,6 +321,7 @@ struct cx23885_board cx23885_boards[] = { .name = "GoTView X5 3D Hybrid", .tuner_type = TUNER_XC5000, .tuner_addr = 0x64, + .tuner_bus = 1, .porta = CX23885_ANALOG_VIDEO, .portb = CX23885_MPEG_DVB, .input = {{ @@ -329,6 +338,21 @@ struct cx23885_board cx23885_boards[] = { CX25840_SVIDEO_CHROMA4, } }, }, + [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { + .ci_type = 2, + .name = "NetUP Dual DVB-T/C-CI RF", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .num_fds_portb = 2, + .num_fds_portc = 2, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .input = { { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE1, + } }, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -520,6 +544,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x5654, .subdevice = 0x2390, .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, + }, { + .subvendor = 0x1b55, + .subdevice = 0xe2e4, + .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -740,6 +768,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) /* Tuner Reset Command */ bitmask = 0x02; break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_tuner_reset(dev, port->nr); + break; } if (bitmask) { @@ -998,6 +1029,33 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + /* GPIO-0 ~INT in + GPIO-1 TMS out + GPIO-2 ~reset chips out + GPIO-3 to GPIO-10 data/addr for CA in/out + GPIO-11 ~CS out + GPIO-12 ADDR out + GPIO-13 ~WR out + GPIO-14 ~RD out + GPIO-15 ~RDY in + GPIO-16 TCK out + GPIO-17 TDO in + GPIO-18 TDI out + */ + cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ + /* GPIO-0 as INT, reset & TMS low */ + cx_clear(GP0_IO, 0x00010006); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00000004); /* reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ + /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ + cx_write(MC417_OEN, 0x00005000); + /* ~RD, ~WR high; ADDR low; ~CS high */ + cx_write(MC417_RWD, 0x00000d00); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; } } @@ -1113,6 +1171,31 @@ void cx23885_ir_fini(struct cx23885_dev *dev) } } +int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) +{ + int data; + int tdo = 0; + struct cx23885_dev *dev = (struct cx23885_dev *)device; + /*TMS*/ + data = ((cx_read(GP0_IO)) & (~0x00000002)); + data |= (tms ? 0x00020002 : 0x00020000); + cx_write(GP0_IO, data); + + /*TDI*/ + data = ((cx_read(MC417_RWD)) & (~0x0000a000)); + data |= (tdi ? 0x00008000 : 0); + cx_write(MC417_RWD, data); + if (read_tdo) + tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ + + cx_write(MC417_RWD, data | 0x00002000); + udelay(1); + /*TCK*/ + cx_write(MC417_RWD, data); + + return tdo; +} + void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) { switch (dev->board) { @@ -1212,6 +1295,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; @@ -1271,6 +1355,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_MYGICA_X8506: @@ -1293,6 +1378,29 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: netup_initialize(dev); break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + int ret; + const struct firmware *fw; + const char *filename = "dvb-netup-altera-01.fw"; + char *action = "configure"; + struct altera_config netup_config = { + .dev = dev, + .action = action, + .jtag_io = netup_jtag_io, + }; + + netup_initialize(dev); + + ret = request_firmware(&fw, filename, &dev->pci->dev); + if (ret != 0) + printk(KERN_ERR "did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details " + "on firmware-problems.", filename); + else + altera_init(&netup_config, fw); + + break; + } } } diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 359882419b7f..9933810b4e33 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -29,9 +29,11 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <asm/div64.h> +#include <linux/firmware.h> #include "cx23885.h" #include "cimax2.h" +#include "altera-ci.h" #include "cx23888-ir.h" #include "cx23885-ir.h" #include "cx23885-av.h" @@ -902,8 +904,6 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dev->pci_bus = dev->pci->bus->number; dev->pci_slot = PCI_SLOT(dev->pci->devfn); cx23885_irq_add(dev, 0x001f00); - if (cx23885_boards[dev->board].cimax > 0) - cx23885_irq_add(dev, 0x01800000); /* for CiMaxes */ /* External Master 1 Bus */ dev->i2c_bus[0].nr = 0; @@ -970,11 +970,12 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) /* Assume some sensible defaults */ dev->tuner_type = cx23885_boards[dev->board].tuner_type; dev->tuner_addr = cx23885_boards[dev->board].tuner_addr; + dev->tuner_bus = cx23885_boards[dev->board].tuner_bus; dev->radio_type = cx23885_boards[dev->board].radio_type; dev->radio_addr = cx23885_boards[dev->board].radio_addr; - dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x\n", - __func__, dev->tuner_type, dev->tuner_addr); + dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n", + __func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus); dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", __func__, dev->radio_type, dev->radio_addr); @@ -1004,6 +1005,9 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) } if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portb) + dev->ts1.num_frontends = + cx23885_boards[dev->board].num_fds_portb; if (cx23885_dvb_register(&dev->ts1) < 0) { printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", __func__); @@ -1018,6 +1022,9 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) } if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portc) + dev->ts2.num_frontends = + cx23885_boards[dev->board].num_fds_portc; if (cx23885_dvb_register(&dev->ts2) < 0) { printk(KERN_ERR "%s() Failed to register dvb on VID_C\n", @@ -1034,6 +1041,10 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_dev_checkrevision(dev); + /* disable MSI for NetUP cards, otherwise CI is not working */ + if (cx23885_boards[dev->board].ci_type > 0) + cx_clear(RDR_RDRCTL1, 1 << 8); + return 0; } @@ -1822,14 +1833,13 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) PCI_MSK_IR); } - if (cx23885_boards[dev->board].cimax > 0 && - ((pci_status & PCI_MSK_GPIO0) || - (pci_status & PCI_MSK_GPIO1))) { - - if (cx23885_boards[dev->board].cimax > 0) - handled += netup_ci_slot_status(dev, pci_status); + if (cx23885_boards[dev->board].ci_type == 1 && + (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0))) + handled += netup_ci_slot_status(dev, pci_status); - } + if (cx23885_boards[dev->board].ci_type == 2 && + (pci_status & PCI_MSK_GPIO0)) + handled += altera_ci_irq(dev); if (ts1_status) { if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) @@ -2064,7 +2074,10 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev, switch (dev->board) { case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: - cx23885_irq_add_enable(dev, 0x01800000); /* for NetUP */ + cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO0); break; } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 5958cb882e93..3c315f94cc85 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -58,6 +58,8 @@ #include "atbm8830.h" #include "ds3000.h" #include "cx23885-f300.h" +#include "altera-ci.h" +#include "stv0367.h" static unsigned int debug; @@ -108,6 +110,22 @@ static void dvb_buf_release(struct videobuf_queue *q, cx23885_free_buffer(q, (struct cx23885_buffer *)vb); } +static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + f = &port->frontends; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); +} + static struct videobuf_queue_ops dvb_qops = { .buf_setup = dvb_buf_setup, .buf_prepare = dvb_buf_prepare, @@ -570,12 +588,84 @@ static struct max2165_config mygic_x8558pro_max2165_cfg2 = { .i2c_address = 0x60, .osc_clk = 20 }; +static struct stv0367_config netup_stv0367_config[] = { + { + .demod_address = 0x1c, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, { + .demod_address = 0x1d, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, +}; + +static struct xc5000_config netup_xc5000_config[] = { + { + .i2c_address = 0x61, + .if_khz = 4500, + }, { + .i2c_address = 0x64, + .if_khz = 4500, + }, +}; + +int netup_altera_fpga_rw(void *device, int flag, int data, int read) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)device; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + uint32_t mem = 0; + + mem = cx_read(MC417_RWD); + if (read) + cx_set(MC417_OEN, ALT_DATA); + else { + cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ + mem &= ~ALT_DATA; + mem |= (data & ALT_DATA); + } + + if (flag) + mem |= ALT_AD_RG; + else + mem &= ~ALT_AD_RG; + + mem &= ~ALT_CS; + if (read) + mem = (mem & ~ALT_RD) | ALT_WR; + else + mem = (mem & ~ALT_WR) | ALT_RD; + + cx_write(MC417_RWD, mem); /* start RW cycle */ + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & ALT_RDY) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); + if (read) + return mem & ALT_DATA; + + return 0; +}; static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; - struct videobuf_dvb_frontend *fe0; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ int ret; /* Get the first frontend */ @@ -586,6 +676,12 @@ static int dvb_register(struct cx23885_tsport *port) /* init struct videobuf_dvb */ fe0->dvb.name = dev->name; + /* multi-frontend gate control is undefined or defaults to fe0 */ + port->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + port->gate_ctrl = cx23885_dvb_gate_ctrl; + /* init frontend */ switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: @@ -966,20 +1062,64 @@ static int dvb_register(struct cx23885_tsport *port) break; } break; - + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + i2c_bus = &dev->i2c_bus[0]; + mfe_shared = 1;/* MFE */ + port->frontends.gate = 0;/* not clear for me yet */ + /* ports B, C */ + /* MFE frontend 1 DVB-T */ + fe0->dvb.frontend = dvb_attach(stv0367ter_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (NULL == dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + /* load xc5000 firmware */ + fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend); + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&port->frontends, 2); + if (fe1 == NULL) + goto frontend_detach; + /* DVB-C init */ + fe1->dvb.frontend = dvb_attach(stv0367cab_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe1->dvb.frontend != NULL) { + fe1->dvb.frontend->id = 1; + if (NULL == dvb_attach(xc5000_attach, + fe1->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + } + break; default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", dev->name); break; } - if (NULL == fe0->dvb.frontend) { + + if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { printk(KERN_ERR "%s: frontend initialization failed\n", - dev->name); - return -1; + dev->name); + goto frontend_detach; } + /* define general-purpose callback pointer */ fe0->dvb.frontend->callback = cx23885_tuner_callback; + if (fe1) + fe1->dvb.frontend->callback = cx23885_tuner_callback; +#if 0 + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; +#endif /* Put the analog decoder in standby to keep it quiet */ call_all(dev, core, s_power, 0); @@ -989,10 +1129,10 @@ static int dvb_register(struct cx23885_tsport *port) /* register everything */ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, - &dev->pci->dev, adapter_nr, 0, + &dev->pci->dev, adapter_nr, mfe_shared, cx23885_dvb_fe_ioctl_override); if (ret) - return ret; + goto frontend_detach; /* init CI & MAC */ switch (dev->board) { @@ -1008,6 +1148,17 @@ static int dvb_register(struct cx23885_tsport *port) netup_ci_init(port); break; } + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + struct altera_ci_config netup_ci_cfg = { + .dev = dev,/* magic number to identify*/ + .adapter = &port->frontends.adapter,/* for CI */ + .demux = &fe0->dvb.demux,/* for hw pid filter */ + .fpga_rw = netup_altera_fpga_rw, + }; + + altera_ci_init(&netup_ci_cfg, port->nr); + break; + } case CX23885_BOARD_TEVII_S470: { u8 eeprom[256]; /* 24C02 i2c eeprom */ @@ -1024,6 +1175,11 @@ static int dvb_register(struct cx23885_tsport *port) } return ret; + +frontend_detach: + port->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&port->frontends); + return -EINVAL; } int cx23885_dvb_register(struct cx23885_tsport *port) @@ -1100,8 +1256,13 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port) case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: netup_ci_exit(port); break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_release(port->dev, port->nr); + break; } + port->gate_ctrl = NULL; + return 0; } diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c index 199b9964bbe5..e97cafd83984 100644 --- a/drivers/media/video/cx23885/cx23885-input.c +++ b/drivers/media/video/cx23885/cx23885-input.c @@ -264,7 +264,7 @@ int cx23885_input_init(struct cx23885_dev *dev) driver_type = RC_DRIVER_IR_RAW; allowed_protos = RC_TYPE_ALL; /* The grey Hauppauge RC-5 remote */ - rc_map = RC_MAP_RC5_HAUPPAUGE_NEW; + rc_map = RC_MAP_HAUPPAUGE; break; case CX23885_BOARD_TEVII_S470: /* Integrated CX23885 IR controller */ diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index a28772db11f0..c87ac682ebbe 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -292,6 +292,7 @@ Channel manager Data Structure entry = 20 DWORD #define RDR_CFG0 0x00050000 #define RDR_CFG1 0x00050004 #define RDR_CFG2 0x00050008 +#define RDR_RDRCTL1 0x0005030c #define RDR_TLCTL0 0x00050318 /* APB DMAC Current Buffer Pointer */ diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 644fcb808c0b..ee57f6bedbe3 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1468,16 +1468,17 @@ int cx23885_video_register(struct cx23885_dev *dev) cx23885_irq_add_enable(dev, 0x01); - if (TUNER_ABSENT != dev->tuner_type) { + if ((TUNER_ABSENT != dev->tuner_type) && + ((dev->tuner_bus == 0) || (dev->tuner_bus == 1))) { struct v4l2_subdev *sd = NULL; if (dev->tuner_addr) sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_bus[1].i2c_adap, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, "tuner", dev->tuner_addr, NULL); else sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_bus[1].i2c_adap, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV)); if (sd) { struct tuner_setup tun_setup; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 62e41ab65810..8db2797bc7c3 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -85,6 +85,7 @@ #define CX23885_BOARD_MYGICA_X8558PRO 27 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29 +#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 @@ -204,10 +205,12 @@ typedef enum { struct cx23885_board { char *name; port_t porta, portb, portc; + int num_fds_portb, num_fds_portc; unsigned int tuner_type; unsigned int radio_type; unsigned char tuner_addr; unsigned char radio_addr; + unsigned int tuner_bus; /* Vendors can and do run the PCIe bridge at different * clock rates, driven physically by crystals on the PCBs. @@ -220,7 +223,7 @@ struct cx23885_board { */ u32 clk_freq; struct cx23885_input input[MAX_CX23885_INPUT]; - int cimax; /* for NetUP */ + int ci_type; /* for NetUP */ }; struct cx23885_subid { @@ -303,6 +306,7 @@ struct cx23885_tsport { /* Allow a single tsport to have multiple frontends */ u32 num_frontends; + void (*gate_ctrl)(struct cx23885_tsport *port, int open); void *port_priv; }; @@ -362,6 +366,7 @@ struct cx23885_dev { v4l2_std_id tvnorm; unsigned int tuner_type; unsigned char tuner_addr; + unsigned int tuner_bus; unsigned int radio_type; unsigned char radio_addr; unsigned int has_radio; diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 54b7fcd469a8..423c1af8a782 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -40,6 +40,7 @@ #include <sound/control.h> #include <sound/initval.h> #include <sound/tlv.h> +#include <media/wm8775.h> #include "cx88.h" #include "cx88-reg.h" @@ -577,6 +578,35 @@ static int snd_cx88_volume_get(struct snd_kcontrol *kcontrol, return 0; } +static void snd_cx88_wm8775_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + struct v4l2_control client_ctl; + int left = value->value.integer.value[0]; + int right = value->value.integer.value[1]; + int v, b; + + memset(&client_ctl, 0, sizeof(client_ctl)); + + /* Pass volume & balance onto any WM8775 */ + if (left >= right) { + v = left << 10; + b = left ? (0x8000 * right) / left : 0x8000; + } else { + v = right << 10; + b = right ? 0xffff - (0x8000 * left) / right : 0x8000; + } + client_ctl.value = v; + client_ctl.id = V4L2_CID_AUDIO_VOLUME; + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); + + client_ctl.value = b; + client_ctl.id = V4L2_CID_AUDIO_BALANCE; + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); +} + /* OK - TODO: test it */ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *value) @@ -587,25 +617,28 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol, int changed = 0; u32 old; + if (core->board.audio_chip == V4L2_IDENT_WM8775) + snd_cx88_wm8775_volume_put(kcontrol, value); + left = value->value.integer.value[0] & 0x3f; right = value->value.integer.value[1] & 0x3f; b = right - left; if (b < 0) { - v = 0x3f - left; - b = (-b) | 0x40; + v = 0x3f - left; + b = (-b) | 0x40; } else { - v = 0x3f - right; + v = 0x3f - right; } /* Do we really know this will always be called with IRQs on? */ spin_lock_irq(&chip->reg_lock); old = cx_read(AUD_VOL_CTL); if (v != (old & 0x3f)) { - cx_write(AUD_VOL_CTL, (old & ~0x3f) | v); - changed = 1; + cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v); + changed = 1; } - if (cx_read(AUD_BAL_CTL) != b) { - cx_write(AUD_BAL_CTL, b); - changed = 1; + if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) { + cx_write(AUD_BAL_CTL, b); + changed = 1; } spin_unlock_irq(&chip->reg_lock); @@ -618,7 +651,7 @@ static const struct snd_kcontrol_new snd_cx88_volume = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, - .name = "Playback Volume", + .name = "Analog-TV Volume", .info = snd_cx88_volume_info, .get = snd_cx88_volume_get, .put = snd_cx88_volume_put, @@ -649,7 +682,17 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, vol = cx_read(AUD_VOL_CTL); if (value->value.integer.value[0] != !(vol & bit)) { vol ^= bit; - cx_write(AUD_VOL_CTL, vol); + cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol); + /* Pass mute onto any WM8775 */ + if ((core->board.audio_chip == V4L2_IDENT_WM8775) && + ((1<<6) == bit)) { + struct v4l2_control client_ctl; + + memset(&client_ctl, 0, sizeof(client_ctl)); + client_ctl.value = 0 != (vol & bit); + client_ctl.id = V4L2_CID_AUDIO_MUTE; + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); + } ret = 1; } spin_unlock_irq(&chip->reg_lock); @@ -658,7 +701,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol, static const struct snd_kcontrol_new snd_cx88_dac_switch = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Playback Switch", + .name = "Audio-Out Switch", .info = snd_ctl_boolean_mono_info, .get = snd_cx88_switch_get, .put = snd_cx88_switch_put, @@ -667,13 +710,51 @@ static const struct snd_kcontrol_new snd_cx88_dac_switch = { static const struct snd_kcontrol_new snd_cx88_source_switch = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Switch", + .name = "Analog-TV Switch", .info = snd_ctl_boolean_mono_info, .get = snd_cx88_switch_get, .put = snd_cx88_switch_put, .private_value = (1<<6), }; +static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + struct v4l2_control client_ctl; + + memset(&client_ctl, 0, sizeof(client_ctl)); + client_ctl.id = V4L2_CID_AUDIO_LOUDNESS; + call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl); + value->value.integer.value[0] = client_ctl.value ? 1 : 0; + + return 0; +} + +static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); + struct cx88_core *core = chip->core; + struct v4l2_control client_ctl; + + memset(&client_ctl, 0, sizeof(client_ctl)); + client_ctl.value = 0 != value->value.integer.value[0]; + client_ctl.id = V4L2_CID_AUDIO_LOUDNESS; + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); + + return 0; +} + +static struct snd_kcontrol_new snd_cx88_alc_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line-In ALC Switch", + .info = snd_ctl_boolean_mono_info, + .get = snd_cx88_alc_get, + .put = snd_cx88_alc_put, +}; + /**************************************************************************** Basic Flow for Sound Devices ****************************************************************************/ @@ -724,7 +805,8 @@ static void snd_cx88_dev_free(struct snd_card * card) static int devno; static int __devinit snd_cx88_create(struct snd_card *card, struct pci_dev *pci, - snd_cx88_card_t **rchip) + snd_cx88_card_t **rchip, + struct cx88_core **core_ptr) { snd_cx88_card_t *chip; struct cx88_core *core; @@ -750,7 +832,7 @@ static int __devinit snd_cx88_create(struct snd_card *card, if (!pci_dma_supported(pci,DMA_BIT_MASK(32))) { dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name); err = -EIO; - cx88_core_put(core,pci); + cx88_core_put(core, pci); return err; } @@ -786,6 +868,7 @@ static int __devinit snd_cx88_create(struct snd_card *card, snd_card_set_dev(card, &pci->dev); *rchip = chip; + *core_ptr = core; return 0; } @@ -795,6 +878,7 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, { struct snd_card *card; snd_cx88_card_t *chip; + struct cx88_core *core = NULL; int err; if (devno >= SNDRV_CARDS) @@ -812,7 +896,7 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, card->private_free = snd_cx88_dev_free; - err = snd_cx88_create(card, pci, &chip); + err = snd_cx88_create(card, pci, &chip, &core); if (err < 0) goto error; @@ -830,6 +914,10 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci, if (err < 0) goto error; + /* If there's a wm8775 then add a Line-In ALC switch */ + if (core->board.audio_chip == V4L2_IDENT_WM8775) + snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip)); + strcpy (card->driver, "CX88x"); sprintf(card->shortname, "Conexant CX%x", pci->device); sprintf(card->longname, "%s at %#llx", diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 4e6ee5584cb3..27222c92b603 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -970,7 +970,8 @@ static const struct cx88_board cx88_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .audio_chip = V4L2_IDENT_WM8775, + .audio_chip = V4L2_IDENT_WM8775, + .i2sinputcntl = 2, .input = {{ .type = CX88_VMUX_DVB, .vmux = 0, @@ -1952,6 +1953,18 @@ static const struct cx88_board cx88_boards[] = { } }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_TEVII_S464] = { + .name = "TeVii S464 DVB-S/S2", + .tuner_type = UNSET, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + } }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_OMICOM_SS4_PCI] = { .name = "Omicom SS4 DVB-S/S2 PCI", .tuner_type = UNSET, @@ -2528,6 +2541,10 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0x9022, .card = CX88_BOARD_TEVII_S460, }, { + .subvendor = 0xd464, + .subdevice = 0x9022, + .card = CX88_BOARD_TEVII_S464, + }, { .subvendor = 0xA044, .subdevice = 0x2011, .card = CX88_BOARD_OMICOM_SS4_PCI, @@ -3165,9 +3182,7 @@ static void cx88_card_setup(struct cx88_core *core) { static u8 eeprom[256]; struct tuner_setup tun_setup; - unsigned int mode_mask = T_RADIO | - T_ANALOG_TV | - T_DIGITAL_TV; + unsigned int mode_mask = T_RADIO | T_ANALOG_TV; memset(&tun_setup, 0, sizeof(tun_setup)); @@ -3287,6 +3302,7 @@ static void cx88_card_setup(struct cx88_core *core) } case CX88_BOARD_TEVII_S420: case CX88_BOARD_TEVII_S460: + case CX88_BOARD_TEVII_S464: case CX88_BOARD_OMICOM_SS4_PCI: case CX88_BOARD_TBS_8910: case CX88_BOARD_TBS_8920: diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 90717ee944ec..7b8c9d3b6efc 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -57,6 +57,7 @@ #include "stb6100.h" #include "stb6100_proc.h" #include "mb86a16.h" +#include "ds3000.h" MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); @@ -648,6 +649,20 @@ static const struct cx24116_config tevii_s460_config = { .reset_device = cx24116_reset_device, }; +static int ds3000_set_ts_param(struct dvb_frontend *fe, + int is_punctured) +{ + struct cx8802_dev *dev = fe->dvb->priv; + dev->ts_gen_cntrl = 4; + + return 0; +} + +static struct ds3000_config tevii_ds3000_config = { + .demod_address = 0x68, + .set_ts_params = ds3000_set_ts_param, +}; + static const struct stv0900_config prof_7301_stv0900_config = { .demod_address = 0x6a, /* demod_mode = 0,*/ @@ -1381,6 +1396,14 @@ static int dvb_register(struct cx8802_dev *dev) if (fe0->dvb.frontend != NULL) fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; break; + case CX88_BOARD_TEVII_S464: + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &core->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = + tevii_dvbs_set_voltage; + break; case CX88_BOARD_OMICOM_SS4_PCI: case CX88_BOARD_TBS_8920: case CX88_BOARD_PROF_7300: diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 06f7d1d00944..c820e2f53527 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -283,7 +283,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_PCHDTV_HD3000: case CX88_BOARD_PCHDTV_HD5500: case CX88_BOARD_HAUPPAUGE_IRONLY: - ir_codes = RC_MAP_HAUPPAUGE_NEW; + ir_codes = RC_MAP_HAUPPAUGE; ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: @@ -373,6 +373,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir_codes = RC_MAP_TBS_NEC; ir->sampling = 0xff00; /* address */ break; + case CX88_BOARD_TEVII_S464: case CX88_BOARD_TEVII_S460: case CX88_BOARD_TEVII_S420: ir_codes = RC_MAP_TEVII_NEC; @@ -603,7 +604,7 @@ void cx88_i2c_init_ir(struct cx88_core *core) if (*addrp == 0x71) { /* Hauppauge XVR */ core->init_data.name = "cx88 Hauppauge XVR remote"; - core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW; + core->init_data.ir_codes = RC_MAP_HAUPPAUGE; core->init_data.type = RC_TYPE_RC5; core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 08220de3d74d..770ec05b5e9b 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -786,8 +786,12 @@ void cx88_set_tvaudio(struct cx88_core *core) break; case WW_I2SADC: set_audio_start(core, 0x01); - /* Slave/Philips/Autobaud */ - cx_write(AUD_I2SINPUTCNTL, 0); + /* + * Slave/Philips/Autobaud + * NB on Nova-S bit1 NPhilipsSony appears to be inverted: + * 0= Sony, 1=Philips + */ + cx_write(AUD_I2SINPUTCNTL, core->board.i2sinputcntl); /* Switch to "I2S ADC mode" */ cx_write(AUD_I2SCNTL, 0x1); set_audio_finish(core, EN_I2SIN_ENABLE); diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 508dabbed986..287a41ee1c4f 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -40,6 +40,7 @@ #include "cx88.h" #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/wm8775.h> MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); @@ -989,6 +990,32 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl) ctl->value = c->v.minimum; if (ctl->value > c->v.maximum) ctl->value = c->v.maximum; + + /* Pass changes onto any WM8775 */ + if (core->board.audio_chip == V4L2_IDENT_WM8775) { + struct v4l2_control client_ctl; + memset(&client_ctl, 0, sizeof(client_ctl)); + client_ctl.id = ctl->id; + + switch (ctl->id) { + case V4L2_CID_AUDIO_MUTE: + client_ctl.value = ctl->value; + break; + case V4L2_CID_AUDIO_VOLUME: + client_ctl.value = (ctl->value) ? + (0x90 + ctl->value) << 8 : 0; + break; + case V4L2_CID_AUDIO_BALANCE: + client_ctl.value = ctl->value << 9; + break; + default: + client_ctl.id = 0; + break; + } + if (client_ctl.id) + call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl); + } + mask=c->mask; switch (ctl->id) { case V4L2_CID_AUDIO_BALANCE: @@ -1526,7 +1553,9 @@ static int radio_queryctrl (struct file *file, void *priv, if (c->id < V4L2_CID_BASE || c->id >= V4L2_CID_LASTP1) return -EINVAL; - if (c->id == V4L2_CID_AUDIO_MUTE) { + if (c->id == V4L2_CID_AUDIO_MUTE || + c->id == V4L2_CID_AUDIO_VOLUME || + c->id == V4L2_CID_AUDIO_BALANCE) { for (i = 0; i < CX8800_CTLS; i++) { if (cx8800_ctls[i].v.id == c->id) break; @@ -1672,7 +1701,7 @@ static const struct v4l2_file_operations video_fops = .read = video_read, .poll = video_poll, .mmap = video_mmap, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops video_ioctl_ops = { @@ -1722,7 +1751,7 @@ static const struct v4l2_file_operations radio_fops = .owner = THIS_MODULE, .open = video_open, .release = video_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops radio_ioctl_ops = { @@ -1856,9 +1885,24 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, /* load and configure helper modules */ - if (core->board.audio_chip == V4L2_IDENT_WM8775) - v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap, - "wm8775", 0x36 >> 1, NULL); + if (core->board.audio_chip == V4L2_IDENT_WM8775) { + struct i2c_board_info wm8775_info = { + .type = "wm8775", + .addr = 0x36 >> 1, + .platform_data = &core->wm8775_data, + }; + struct v4l2_subdev *sd; + + if (core->boardnr == CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1) + core->wm8775_data.is_nova_s = true; + else + core->wm8775_data.is_nova_s = false; + + sd = v4l2_i2c_new_subdev_board(&core->v4l2_dev, &core->i2c_adap, + &wm8775_info, NULL); + if (sd != NULL) + sd->grp_id = WM8775_GID; + } if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) { /* This probes for a tda9874 as is used on some @@ -1882,6 +1926,15 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, request_module("ir-kbd-i2c"); } + /* Sets device info at pci_dev */ + pci_set_drvdata(pci_dev, dev); + + /* initial device configuration */ + mutex_lock(&core->lock); + cx88_set_tvnorm(core, core->tvnorm); + init_controls(core); + cx88_video_mux(core, 0); + /* register v4l devices */ dev->video_dev = cx88_vdev_init(core,dev->pci, &cx8800_video_template,"video"); @@ -1923,16 +1976,6 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, core->name, video_device_node_name(dev->radio_dev)); } - /* everything worked */ - pci_set_drvdata(pci_dev,dev); - - /* initial device configuration */ - mutex_lock(&core->lock); - cx88_set_tvnorm(core,core->tvnorm); - init_controls(core); - cx88_video_mux(core,0); - mutex_unlock(&core->lock); - /* start tvaudio thread */ if (core->board.tuner_type != TUNER_ABSENT) { core->kthread = kthread_run(cx88_audio_thread, core, "cx88 tvaudio"); @@ -1942,11 +1985,14 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, core->name, err); } } + mutex_unlock(&core->lock); + return 0; fail_unreg: cx8800_unregister_video(dev); free_irq(pci_dev->irq, dev); + mutex_unlock(&core->lock); fail_core: cx88_core_put(core,dev->pci); fail_free: diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index c9981e77416a..9b3742a7746c 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -33,6 +33,7 @@ #include <media/cx2341x.h> #include <media/videobuf-dvb.h> #include <media/ir-kbd-i2c.h> +#include <media/wm8775.h> #include "btcx-risc.h" #include "cx88-reg.h" @@ -240,6 +241,7 @@ extern const struct sram_channel const cx88_sram_channels[]; #define CX88_BOARD_PROF_7301 83 #define CX88_BOARD_SAMSUNG_SMT_7020 84 #define CX88_BOARD_TWINHAN_VP1027_DVBS 85 +#define CX88_BOARD_TEVII_S464 86 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -273,6 +275,9 @@ struct cx88_board { enum cx88_board_type mpeg; unsigned int audio_chip; int num_frontends; + + /* Used for I2S devices */ + int i2sinputcntl; }; struct cx88_subid { @@ -379,6 +384,7 @@ struct cx88_core { /* I2C remote data */ struct IR_i2c_init_data init_data; + struct wm8775_platform_data wm8775_data; struct mutex lock; /* various v4l controls */ @@ -398,17 +404,21 @@ static inline struct cx88_core *to_core(struct v4l2_device *v4l2_dev) return container_of(v4l2_dev, struct cx88_core, v4l2_dev); } -#define call_all(core, o, f, args...) \ +#define WM8775_GID (1 << 0) + +#define call_hw(core, grpid, o, f, args...) \ do { \ if (!core->i2c_rc) { \ if (core->gate_ctrl) \ core->gate_ctrl(core, 1); \ - v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \ + v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \ if (core->gate_ctrl) \ core->gate_ctrl(core, 0); \ } \ } while (0) +#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args) + struct cx8800_dev; struct cx8802_dev; diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c index 353eadaa823e..71e961e53a56 100644 --- a/drivers/media/video/davinci/vpfe_capture.c +++ b/drivers/media/video/davinci/vpfe_capture.c @@ -1719,7 +1719,7 @@ unlock_out: static long vpfe_param_handler(struct file *file, void *priv, - int cmd, void *param) + bool valid_prio, int cmd, void *param) { struct vpfe_device *vpfe_dev = video_drvdata(file); int ret = 0; diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 87f77a34eeab..69fcea82d01c 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -834,7 +834,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, - .ir_codes = RC_MAP_HAUPPAUGE_NEW, + .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -859,7 +859,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .mts_firmware = 1, - .ir_codes = RC_MAP_HAUPPAUGE_NEW, + .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -885,7 +885,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, - .ir_codes = RC_MAP_HAUPPAUGE_NEW, + .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -911,7 +911,7 @@ struct em28xx_board em28xx_boards[] = { .mts_firmware = 1, .has_dvb = 1, .dvb_gpio = hauppauge_wintv_hvr_900_digital, - .ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW, + .ir_codes = RC_MAP_HAUPPAUGE, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -2430,7 +2430,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)"; break; case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: - dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW; + dev->init_data.ir_codes = RC_MAP_HAUPPAUGE; dev->init_data.get_key = em28xx_get_key_em_haup; dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; break; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index f34d524ccb09..a83131bd00b2 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1387,6 +1387,27 @@ static int vidioc_queryctrl(struct file *file, void *priv, return -EINVAL; } +/* + * FIXME: This is an indirect way to check if a control exists at a + * subdev. Instead of that hack, maybe the better would be to change all + * subdevs to return -ENOIOCTLCMD, if an ioctl is not supported. + */ +static int check_subdev_ctrl(struct em28xx *dev, int id) +{ + struct v4l2_queryctrl qc; + + memset(&qc, 0, sizeof(qc)); + qc.id = id; + + /* enumerate V4L2 device controls */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, queryctrl, &qc); + + if (qc.type) + return 0; + else + return -EINVAL; +} + static int vidioc_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { @@ -1399,7 +1420,6 @@ static int vidioc_g_ctrl(struct file *file, void *priv, return rc; rc = 0; - /* Set an AC97 control */ if (dev->audio_mode.ac97 != EM28XX_NO_AC97) rc = ac97_get_ctrl(dev, ctrl); @@ -1408,6 +1428,9 @@ static int vidioc_g_ctrl(struct file *file, void *priv, /* It were not an AC97 control. Sends it to the v4l2 dev interface */ if (rc == 1) { + if (check_subdev_ctrl(dev, ctrl->id)) + return -EINVAL; + v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl); rc = 0; } @@ -1434,8 +1457,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv, /* It isn't an AC97 control. Sends it to the v4l2 dev interface */ if (rc == 1) { - rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, core, s_ctrl, ctrl); - + rc = check_subdev_ctrl(dev, ctrl->id); + if (!rc) + v4l2_device_call_all(&dev->v4l2_dev, 0, + core, s_ctrl, ctrl); /* * In the case of non-AC97 volume controls, we still need * to do some setups at em28xx, in order to mute/unmute @@ -1452,7 +1477,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, rc = em28xx_audio_analog_set(dev); } } - return rc; + return (rc < 0) ? rc : 0; } static int vidioc_g_tuner(struct file *file, void *priv, diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index dda56ff834f4..eb04e8b59989 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -104,6 +104,15 @@ config USB_GSPCA_MR97310A To compile this driver as a module, choose M here: the module will be called gspca_mr97310a. +config USB_GSPCA_NW80X + tristate "Divio based (NW80x) USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the NW80x chips. + + To compile this driver as a module, choose M here: the + module will be called gspca_nw80x. + config USB_GSPCA_OV519 tristate "OV51x / OVFX2 / W996xCF USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA @@ -346,6 +355,16 @@ config USB_GSPCA_VC032X To compile this driver as a module, choose M here: the module will be called gspca_vc032x. +config USB_GSPCA_VICAM + tristate "ViCam USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for the 3com homeconnect camera + (vicam). + + To compile this driver as a module, choose M here: the + module will be called gspca_vicam. + config USB_GSPCA_XIRLINK_CIT tristate "Xirlink C-It USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 24e695b8b077..855fbc8c9c47 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_JEILINJ) += gspca_jeilinj.o obj-$(CONFIG_USB_GSPCA_KONICA) += gspca_konica.o obj-$(CONFIG_USB_GSPCA_MARS) += gspca_mars.o obj-$(CONFIG_USB_GSPCA_MR97310A) += gspca_mr97310a.o +obj-$(CONFIG_USB_GSPCA_NW80X) += gspca_nw80x.o obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o obj-$(CONFIG_USB_GSPCA_OV534_9) += gspca_ov534_9.o @@ -34,6 +35,7 @@ obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o +obj-$(CONFIG_USB_GSPCA_VICAM) += gspca_vicam.o obj-$(CONFIG_USB_GSPCA_XIRLINK_CIT) += gspca_xirlink_cit.o obj-$(CONFIG_USB_GSPCA_ZC3XX) += gspca_zc3xx.o @@ -47,6 +49,7 @@ gspca_jeilinj-objs := jeilinj.o gspca_konica-objs := konica.o gspca_mars-objs := mars.o gspca_mr97310a-objs := mr97310a.o +gspca_nw80x-objs := nw80x.o gspca_ov519-objs := ov519.o gspca_ov534-objs := ov534.o gspca_ov534_9-objs := ov534_9.o @@ -73,6 +76,7 @@ gspca_sunplus-objs := sunplus.o gspca_t613-objs := t613.o gspca_tv8532-objs := tv8532.o gspca_vc032x-objs := vc032x.o +gspca_vicam-objs := vicam.o gspca_xirlink_cit-objs := xirlink_cit.o gspca_zc3xx-objs := zc3xx.o diff --git a/drivers/media/video/gspca/autogain_functions.h b/drivers/media/video/gspca/autogain_functions.h new file mode 100644 index 000000000000..46777eee678b --- /dev/null +++ b/drivers/media/video/gspca/autogain_functions.h @@ -0,0 +1,179 @@ +/* + * Functions for auto gain. + * + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* auto gain and exposure algorithm based on the knee algorithm described here: + http://ytse.tricolour.net/docs/LowLightOptimization.html + + Returns 0 if no changes were made, 1 if the gain and or exposure settings + where changed. */ +static inline int auto_gain_n_exposure( + struct gspca_dev *gspca_dev, + int avg_lum, + int desired_avg_lum, + int deadzone, + int gain_knee, + int exposure_knee) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, steps, gain, orig_gain, exposure, orig_exposure; + int retval = 0; + + orig_gain = gain = sd->ctrls[GAIN].val; + orig_exposure = exposure = sd->ctrls[EXPOSURE].val; + + /* If we are of a multiple of deadzone, do multiple steps to reach the + desired lumination fast (with the risc of a slight overshoot) */ + steps = abs(desired_avg_lum - avg_lum) / deadzone; + + PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d", + avg_lum, desired_avg_lum, steps); + + for (i = 0; i < steps; i++) { + if (avg_lum > desired_avg_lum) { + if (gain > gain_knee) + gain--; + else if (exposure > exposure_knee) + exposure--; + else if (gain > sd->ctrls[GAIN].def) + gain--; + else if (exposure > sd->ctrls[EXPOSURE].min) + exposure--; + else if (gain > sd->ctrls[GAIN].min) + gain--; + else + break; + } else { + if (gain < sd->ctrls[GAIN].def) + gain++; + else if (exposure < exposure_knee) + exposure++; + else if (gain < gain_knee) + gain++; + else if (exposure < sd->ctrls[EXPOSURE].max) + exposure++; + else if (gain < sd->ctrls[GAIN].max) + gain++; + else + break; + } + } + + if (gain != orig_gain) { + sd->ctrls[GAIN].val = gain; + setgain(gspca_dev); + retval = 1; + } + if (exposure != orig_exposure) { + sd->ctrls[EXPOSURE].val = exposure; + setexposure(gspca_dev); + retval = 1; + } + + if (retval) + PDEBUG(D_FRAM, "autogain: changed gain: %d, expo: %d", + gain, exposure); + return retval; +} + +/* Autogain + exposure algorithm for cameras with a coarse exposure control + (usually this means we can only control the clockdiv to change exposure) + As changing the clockdiv so that the fps drops from 30 to 15 fps for + example, will lead to a huge exposure change (it effectively doubles), + this algorithm normally tries to only adjust the gain (between 40 and + 80 %) and if that does not help, only then changes exposure. This leads + to a much more stable image then using the knee algorithm which at + certain points of the knee graph will only try to adjust exposure, + which leads to oscilating as one exposure step is huge. + + Note this assumes that the sd struct for the cam in question has + exp_too_high_cnt and exp_too_high_cnt int members for use by this function. + + Returns 0 if no changes were made, 1 if the gain and or exposure settings + where changed. */ +static inline int coarse_grained_expo_autogain( + struct gspca_dev *gspca_dev, + int avg_lum, + int desired_avg_lum, + int deadzone) +{ + struct sd *sd = (struct sd *) gspca_dev; + int steps, gain, orig_gain, exposure, orig_exposure; + int gain_low, gain_high; + int retval = 0; + + orig_gain = gain = sd->ctrls[GAIN].val; + orig_exposure = exposure = sd->ctrls[EXPOSURE].val; + + gain_low = (sd->ctrls[GAIN].max - sd->ctrls[GAIN].min) / 5 * 2; + gain_low += sd->ctrls[GAIN].min; + gain_high = (sd->ctrls[GAIN].max - sd->ctrls[GAIN].min) / 5 * 4; + gain_high += sd->ctrls[GAIN].min; + + /* If we are of a multiple of deadzone, do multiple steps to reach the + desired lumination fast (with the risc of a slight overshoot) */ + steps = (desired_avg_lum - avg_lum) / deadzone; + + PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d", + avg_lum, desired_avg_lum, steps); + + if ((gain + steps) > gain_high && + exposure < sd->ctrls[EXPOSURE].max) { + gain = gain_high; + sd->exp_too_low_cnt++; + sd->exp_too_high_cnt = 0; + } else if ((gain + steps) < gain_low && + exposure > sd->ctrls[EXPOSURE].min) { + gain = gain_low; + sd->exp_too_high_cnt++; + sd->exp_too_low_cnt = 0; + } else { + gain += steps; + if (gain > sd->ctrls[GAIN].max) + gain = sd->ctrls[GAIN].max; + else if (gain < sd->ctrls[GAIN].min) + gain = sd->ctrls[GAIN].min; + sd->exp_too_high_cnt = 0; + sd->exp_too_low_cnt = 0; + } + + if (sd->exp_too_high_cnt > 3) { + exposure--; + sd->exp_too_high_cnt = 0; + } else if (sd->exp_too_low_cnt > 3) { + exposure++; + sd->exp_too_low_cnt = 0; + } + + if (gain != orig_gain) { + sd->ctrls[GAIN].val = gain; + setgain(gspca_dev); + retval = 1; + } + if (exposure != orig_exposure) { + sd->ctrls[EXPOSURE].val = exposure; + setexposure(gspca_dev); + retval = 1; + } + + if (retval) + PDEBUG(D_FRAM, "autogain: changed gain: %d, expo: %d", + gain, exposure); + return retval; +} diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c index 4bf2cab98d64..9ddbac680663 100644 --- a/drivers/media/video/gspca/cpia1.c +++ b/drivers/media/video/gspca/cpia1.c @@ -1,7 +1,7 @@ /* * cpia CPiA (1) gspca driver * - * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> * * This module is adapted from the in kernel v4l1 cpia driver which is : * @@ -28,6 +28,7 @@ #define MODULE_NAME "cpia1" +#include <linux/input.h> #include "gspca.h" MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); @@ -653,10 +654,15 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command, break; case CPIA_COMMAND_ReadMCPorts: - if (!sd->params.qx3.qx3_detected) - break; /* test button press */ - sd->params.qx3.button = ((gspca_dev->usb_buf[1] & 0x02) == 0); + a = ((gspca_dev->usb_buf[1] & 0x02) == 0); + if (a != sd->params.qx3.button) { +#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) + input_report_key(gspca_dev->input_dev, KEY_CAMERA, a); + input_sync(gspca_dev->input_dev); +#endif + sd->params.qx3.button = a; + } if (sd->params.qx3.button) { /* button pressed - unlock the latch */ do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, @@ -1400,7 +1406,7 @@ static void monitor_exposure(struct gspca_dev *gspca_dev) if ((sd->exposure_status == EXPOSURE_VERY_DARK || sd->exposure_status == EXPOSURE_DARK) && sd->exposure_count >= DARK_TIME * framerate && - sd->params.sensorFps.divisor < 3) { + sd->params.sensorFps.divisor < 2) { /* dark for too long */ ++sd->params.sensorFps.divisor; @@ -1456,7 +1462,7 @@ static void monitor_exposure(struct gspca_dev *gspca_dev) if ((sd->exposure_status == EXPOSURE_VERY_DARK || sd->exposure_status == EXPOSURE_DARK) && sd->exposure_count >= DARK_TIME * framerate && - sd->params.sensorFps.divisor < 3) { + sd->params.sensorFps.divisor < 2) { /* dark for too long */ ++sd->params.sensorFps.divisor; @@ -1738,6 +1744,8 @@ static int sd_start(struct gspca_dev *gspca_dev) static void sd_stopN(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + command_pause(gspca_dev); /* save camera state for later open (developers guide ch 3.5.3) */ @@ -1748,6 +1756,17 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* Update the camera status */ do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0); + +#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) + /* If the last button state is pressed, release it now! */ + if (sd->params.qx3.button) { + /* The camera latch will hold the pressed state until we reset + the latch, so we do not reset sd->params.qx3.button now, to + avoid a false keypress being reported the next sd_start */ + input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0); + input_sync(gspca_dev->input_dev); + } +#endif } /* this function is called at probe and resume time */ @@ -1852,8 +1871,7 @@ static void sd_dq_callback(struct gspca_dev *gspca_dev) /* Update our knowledge of the camera state */ do_command(gspca_dev, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); - if (sd->params.qx3.qx3_detected) - do_command(gspca_dev, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0); + do_command(gspca_dev, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0); } static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) @@ -2085,6 +2103,9 @@ static const struct sd_desc sd_desc = { .dq_callback = sd_dq_callback, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, +#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) + .other_input = 1, +#endif }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index f21f2a258ae0..9c6a643caf01 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1,7 +1,7 @@ /* * Main USB camera driver * - * Copyright (C) 2008-2010 Jean-François Moine <http://moinejf.free.fr> + * Copyright (C) 2008-2011 Jean-François Moine <http://moinejf.free.fr> * * Camera button input handling by Márton Németh * Copyright (C) 2009-2010 Márton Németh <nm127@freemail.hu> @@ -414,7 +414,6 @@ resubmit: * - 0 or many INTER_PACKETs * - one LAST_PACKET * DISCARD_PACKET invalidates the whole frame. - * On LAST_PACKET, a new frame is returned. */ void gspca_frame_add(struct gspca_dev *gspca_dev, enum gspca_packet_type packet_type, @@ -631,7 +630,8 @@ static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt, ep = &alt->endpoint[i]; attr = ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; if (attr == xfer - && ep->desc.wMaxPacketSize != 0) + && ep->desc.wMaxPacketSize != 0 + && usb_endpoint_dir_in(&ep->desc)) return ep; } return NULL; @@ -1525,10 +1525,12 @@ static int vidioc_reqbufs(struct file *file, void *priv, gspca_dev->usb_err = 0; gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); + + /* Don't restart the stream when switching from read + * to mmap mode */ + if (gspca_dev->memory == GSPCA_MEMORY_READ) + streaming = 0; } - /* Don't restart the stream when switching from read to mmap mode */ - if (gspca_dev->memory == GSPCA_MEMORY_READ) - streaming = 0; /* free the previous allocated buffers, if any */ if (gspca_dev->nframes != 0) @@ -2152,7 +2154,7 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = { .vidioc_g_chip_ident = vidioc_g_chip_ident, }; -static struct video_device gspca_template = { +static const struct video_device gspca_template = { .name = "gspca main driver", .fops = &dev_fops, .ioctl_ops = &dev_ioctl_ops, diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c index 06b777f5379e..36dae38b1e38 100644 --- a/drivers/media/video/gspca/jeilinj.c +++ b/drivers/media/video/gspca/jeilinj.c @@ -183,7 +183,6 @@ static void jlj_dostream(struct work_struct *work) struct sd *dev = container_of(work, struct sd, work_struct); struct gspca_dev *gspca_dev = &dev->gspca_dev; int blocks_left; /* 0x200-sized blocks remaining in current frame. */ - int size_in_blocks; int act_len; int packet_type; int ret; @@ -209,7 +208,6 @@ static void jlj_dostream(struct work_struct *work) act_len, JEILINJ_MAX_TRANSFER); if (ret < 0 || act_len < FRAME_HEADER_LEN) goto quit_stream; - size_in_blocks = buffer[0x0a]; blocks_left = buffer[0x0a] - 1; PDEBUG(D_STREAM, "blocks_left = 0x%x", blocks_left); diff --git a/drivers/media/video/gspca/nw80x.c b/drivers/media/video/gspca/nw80x.c new file mode 100644 index 000000000000..8e754fd4dc5e --- /dev/null +++ b/drivers/media/video/gspca/nw80x.c @@ -0,0 +1,2145 @@ +/* + * DivIO nw80x subdriver + * + * Copyright (C) 2011 Jean-François Moine (http://moinejf.free.fr) + * Copyright (C) 2003 Sylvain Munaut <tnt@246tNt.com> + * Kjell Claesson <keyson@users.sourceforge.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "nw80x" + +#include "gspca.h" + +MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>"); +MODULE_DESCRIPTION("NW80x USB Camera Driver"); +MODULE_LICENSE("GPL"); + +static int webcam; + +/* controls */ +enum e_ctrl { + GAIN, + EXPOSURE, + AUTOGAIN, + NCTRLS /* number of controls */ +}; + +#define AUTOGAIN_DEF 1 + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + + struct gspca_ctrl ctrls[NCTRLS]; + + u32 ae_res; + s8 ag_cnt; +#define AG_CNT_START 13 + u8 exp_too_low_cnt; + u8 exp_too_high_cnt; + + u8 bridge; + u8 webcam; +}; + +enum bridges { + BRIDGE_NW800, /* and et31x110 */ + BRIDGE_NW801, + BRIDGE_NW802, +}; +enum webcams { + Generic800, + SpaceCam, /* Trust 120 SpaceCam */ + SpaceCam2, /* other Trust 120 SpaceCam */ + Cvideopro, /* Conceptronic Video Pro */ + Dlink350c, + DS3303u, + Kr651us, + Kritter, + Mustek300, + Proscope, + Twinkle, + DvcV6, + P35u, + Generic802, + NWEBCAMS /* number of webcams */ +}; + +static const u8 webcam_chip[NWEBCAMS] = { + [Generic800] = BRIDGE_NW800, /* 06a5:0000 + * Typhoon Webcam 100 USB */ + + [SpaceCam] = BRIDGE_NW800, /* 06a5:d800 + * Trust SpaceCam120 or SpaceCam100 PORTABLE */ + + [SpaceCam2] = BRIDGE_NW800, /* 06a5:d800 - pas106 + * other Trust SpaceCam120 or SpaceCam100 PORTABLE */ + + [Cvideopro] = BRIDGE_NW802, /* 06a5:d001 + * Conceptronic Video Pro 'CVIDEOPRO USB Webcam CCD' */ + + [Dlink350c] = BRIDGE_NW802, /* 06a5:d001 + * D-Link NetQam Pro 250plus */ + + [DS3303u] = BRIDGE_NW801, /* 06a5:d001 + * Plustek Opticam 500U or ProLink DS3303u */ + + [Kr651us] = BRIDGE_NW802, /* 06a5:d001 + * Panasonic GP-KR651US */ + + [Kritter] = BRIDGE_NW802, /* 06a5:d001 + * iRez Kritter cam */ + + [Mustek300] = BRIDGE_NW802, /* 055f:d001 + * Mustek Wcam 300 mini */ + + [Proscope] = BRIDGE_NW802, /* 06a5:d001 + * Scalar USB Microscope (ProScope) */ + + [Twinkle] = BRIDGE_NW800, /* 06a5:d800 - hv7121b? (seems pas106) + * Divio Chicony TwinkleCam + * DSB-C110 */ + + [DvcV6] = BRIDGE_NW802, /* 0502:d001 + * DVC V6 */ + + [P35u] = BRIDGE_NW801, /* 052b:d001, 06a5:d001 and 06be:d001 + * EZCam Pro p35u */ + + [Generic802] = BRIDGE_NW802, +}; +/* + * other webcams: + * - nw801 046d:d001 + * Logitech QuickCam Pro (dark focus ring) + * - nw801 0728:d001 + * AVerMedia Camguard + * - nw??? 06a5:d001 + * D-Link NetQam Pro 250plus + * - nw800 065a:d800 + * Showcam NGS webcam + * - nw??? ????:???? + * Sceptre svc300 + */ + +/* + * registers + * nw800/et31x110 nw801 nw802 + * 0000..009e 0000..00a1 0000..009e + * 0200..0211 id id + * 0300..0302 id id + * 0400..0406 (inex) 0400..0406 + * 0500..0505 0500..0506 (inex) + * 0600..061a 0600..0601 0600..0601 + * 0800..0814 id id + * 1000..109c 1000..10a1 1000..109a + */ + +/* resolutions + * nw800: 320x240, 352x288 + * nw801/802: 320x240, 640x480 + */ +static const struct v4l2_pix_format cif_mode[] = { + {320, 240, V4L2_PIX_FMT_JPGL, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 4 / 8, + .colorspace = V4L2_COLORSPACE_JPEG}, + {352, 288, V4L2_PIX_FMT_JPGL, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288 * 4 / 8, + .colorspace = V4L2_COLORSPACE_JPEG} +}; +static const struct v4l2_pix_format vga_mode[] = { + {320, 240, V4L2_PIX_FMT_JPGL, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 4 / 8, + .colorspace = V4L2_COLORSPACE_JPEG}, + {640, 480, V4L2_PIX_FMT_JPGL, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 3 / 8, + .colorspace = V4L2_COLORSPACE_JPEG}, +}; + +/* + * The sequences below contain: + * - 1st and 2nd bytes: either + * - register number (BE) + * - I2C0 + i2c address + * - 3rd byte: data length (=0 for end of sequence) + * - n bytes: data + */ +#define I2C0 0xff + +static const u8 nw800_init[] = { + 0x04, 0x05, 0x01, 0x61, + 0x04, 0x04, 0x01, 0x01, + 0x04, 0x06, 0x01, 0x04, + 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, + 0x05, 0x05, 0x01, 0x00, + 0, 0, 0 +}; +static const u8 nw800_start[] = { + 0x04, 0x06, 0x01, 0xc0, + 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, + 0xef, 0x0e, 0x00, 0x74, 0x01, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x3e, 0x00, 0x24, + 0x03, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xa0, 0x48, 0xc3, 0x02, 0x88, 0x0c, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x06, 0x00, 0x08, + 0x00, 0x32, 0x01, 0x01, 0x00, 0x16, 0x00, 0x04, + 0x00, 0x4b, 0x00, 0x76, 0x00, 0x86, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x61, 0xc0, + 0x05, 0x00, 0x06, 0xe8, 0x00, 0x00, 0x00, 0x20, 0x20, + 0x06, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x83, 0x02, 0x20, 0x00, 0x13, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1d, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x2d, 0x00, 0x62, + 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, 0x20, + 0x01, 0x60, 0x01, 0x00, 0x00, + + 0x04, 0x04, 0x01, 0xff, + 0x04, 0x06, 0x01, 0xc4, + + 0x04, 0x06, 0x01, 0xc0, + 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, + 0xef, 0x0e, 0x00, 0x74, 0x01, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x3e, 0x00, 0x24, + 0x03, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xa0, 0x48, 0xc3, 0x02, 0x88, 0x0c, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x06, 0x00, 0x08, + 0x00, 0x32, 0x01, 0x01, 0x00, 0x16, 0x00, 0x04, + 0x00, 0x4b, 0x00, 0x76, 0x00, 0x86, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x61, 0xc0, + 0x05, 0x00, 0x06, 0xe8, 0x00, 0x00, 0x00, 0x20, 0x20, + 0x06, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x83, 0x02, 0x20, 0x00, 0x13, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1d, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x2d, 0x00, 0x62, + 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, 0x20, + 0x01, 0x60, 0x01, 0x00, 0x00, + + 0x02, 0x00, 0x11, 0x48, 0x58, 0x9e, 0x48, 0x58, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x36, 0x05, 0x01, 0xf2, 0x86, 0x65, + 0x40, + 0x00, 0x80, 0x01, 0xa0, + 0x10, 0x1a, 0x01, 0x00, + 0x00, 0x91, 0x02, 0x6c, 0x01, + 0x00, 0x03, 0x02, 0xc8, 0x01, + 0x10, 0x1a, 0x01, 0x00, + 0x10, 0x00, 0x01, 0x83, + 0x10, 0x8f, 0x0c, 0x62, 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, + 0x20, 0x01, 0x60, 0x01, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x10, 0x1b, 0x02, 0x69, 0x00, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x05, 0x02, 0x01, 0x02, + 0x06, 0x00, 0x02, 0x04, 0xd9, + 0x05, 0x05, 0x01, 0x20, + 0x05, 0x05, 0x01, 0x21, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x08, 0x21, 0x3d, 0x52, 0x63, 0x75, 0x83, + 0x91, 0x9e, 0xaa, 0xb6, 0xc1, 0xcc, 0xd6, 0xe0, + 0xea, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x13, 0x13, + 0x10, 0x03, 0x01, 0x14, + 0x10, 0x41, 0x11, 0x00, 0x08, 0x21, 0x3d, 0x52, 0x63, 0x75, 0x83, + 0x91, 0x9e, 0xaa, 0xb6, 0xc1, 0xcc, 0xd6, 0xe0, + 0xea, + 0x10, 0x0b, 0x01, 0x14, + 0x10, 0x0d, 0x01, 0x20, + 0x10, 0x0c, 0x01, 0x34, + 0x04, 0x06, 0x01, 0xc3, + 0x04, 0x04, 0x01, 0x00, + 0x05, 0x02, 0x01, 0x02, + 0x06, 0x00, 0x02, 0x00, 0x48, + 0x05, 0x05, 0x01, 0x20, + 0x05, 0x05, 0x01, 0x21, + 0, 0, 0 +}; + +/* 06a5:d001 - nw801 - Panasonic + * P35u */ +static const u8 nw801_start_1[] = { + 0x05, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x0e, 0x00, 0x00, 0xf9, 0x02, 0x11, 0x00, 0x0e, + 0x01, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x22, 0xb4, 0x6f, 0x3f, 0x0f, 0x88, 0x20, 0x08, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x69, 0xa8, 0x1f, 0x00, + 0x0d, 0x02, 0x07, 0x00, 0x01, 0x00, 0x19, 0x00, + 0xf2, 0x00, 0x18, 0x06, 0x10, 0x06, 0x10, 0x00, + 0x36, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, + 0x05, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x22, 0x02, 0x80, 0x00, 0x1e, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0a, 0x15, 0x08, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x35, 0xfd, 0x07, 0x3d, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x14, 0x02, + 0x00, 0x01, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x40, 0x20, 0x10, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, 0xf7, + 0x10, 0x40, 0x40, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, 0x80, + 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, 0xa4, + 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, 0xcf, + 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, 0x64, + 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, 0xe2, + 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x10, 0x80, 0x22, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0e, 0x00, 0x82, 0x02, + 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, 0x01, + 0xf0, 0x00, + 0, 0, 0, +}; +static const u8 nw801_start_qvga[] = { + 0x02, 0x00, 0x10, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x18, 0x0b, 0x06, 0xa2, 0x86, 0x78, + 0x02, 0x0f, 0x01, 0x6b, + 0x10, 0x1a, 0x01, 0x15, + 0x00, 0x00, 0x01, 0x1e, + 0x10, 0x00, 0x01, 0x2f, + 0x10, 0x8c, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x11, 0x08, 0x29, 0x00, 0x18, 0x01, 0x1f, 0x00, 0xd2, 0x00, + /* AE window */ + 0, 0, 0, +}; +static const u8 nw801_start_vga[] = { + 0x02, 0x00, 0x10, 0x78, 0xa0, 0x97, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xf0, + 0x02, 0x0f, 0x01, 0xd5, + 0x10, 0x1a, 0x01, 0x15, + 0x00, 0x00, 0x01, 0x0e, + 0x10, 0x00, 0x01, 0x22, + 0x10, 0x8c, 0x08, 0x00, 0x00, 0x7f, 0x02, 0x00, 0x00, 0xdf, 0x01, + 0x10, 0x11, 0x08, 0x51, 0x00, 0x30, 0x02, 0x3d, 0x00, 0xa4, 0x01, + 0, 0, 0, +}; +static const u8 nw801_start_2[] = { + 0x10, 0x04, 0x01, 0x1a, + 0x10, 0x19, 0x01, 0x09, /* clock */ + 0x10, 0x24, 0x06, 0xc0, 0x00, 0x3f, 0x02, 0x00, 0x01, + /* .. gain .. */ + 0x00, 0x03, 0x02, 0x92, 0x03, + 0x00, 0x1d, 0x04, 0xf2, 0x00, 0x24, 0x07, + 0x00, 0x7b, 0x01, 0xcf, + 0x10, 0x94, 0x01, 0x07, + 0x05, 0x05, 0x01, 0x01, + 0x05, 0x04, 0x01, 0x01, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x48, 0x11, 0x00, 0x37, 0x55, 0x6b, 0x7d, 0x8d, 0x9b, 0xa8, + 0xb4, 0xbf, 0xca, 0xd4, 0xdd, 0xe6, 0xef, 0xf0, + 0xf0, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x0c, 0x0c, + 0x10, 0x03, 0x01, 0x08, + 0x10, 0x48, 0x11, 0x00, 0x37, 0x55, 0x6b, 0x7d, 0x8d, 0x9b, 0xa8, + 0xb4, 0xbf, 0xca, 0xd4, 0xdd, 0xe6, 0xef, 0xf0, + 0xf0, + 0x10, 0x0b, 0x01, 0x0b, + 0x10, 0x0d, 0x01, 0x0b, + 0x10, 0x0c, 0x01, 0x1f, + 0x05, 0x06, 0x01, 0x03, + 0, 0, 0 +}; + +/* nw802 (sharp IR3Y38M?) */ +static const u8 nw802_start[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x10, 0x00, 0x00, 0xf9, 0x02, 0x10, 0x00, 0x4d, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb4, 0x6f, 0x3f, 0x0f, 0x88, 0x20, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x01, 0x00, 0x16, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x08, 0x00, 0x18, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x21, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa1, 0x02, 0x80, 0x00, 0x1d, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0xff, 0x01, 0xc0, 0x00, 0x14, + 0x02, 0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x10, 0x02, 0xf2, 0x8f, 0x78, + 0x40, + 0x10, 0x1a, 0x01, 0x00, + 0x10, 0x00, 0x01, 0xad, + 0x00, 0x00, 0x01, 0x08, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x51, 0x00, 0xf0, 0x00, 0x3d, 0x00, 0xb4, 0x00, + 0x10, 0x1d, 0x08, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, + 0x10, 0x0e, 0x01, 0x27, + 0x10, 0x41, 0x11, 0x00, 0x0e, 0x35, 0x4f, 0x62, 0x71, 0x7f, 0x8b, + 0x96, 0xa0, 0xa9, 0xb2, 0xbb, 0xc3, 0xca, 0xd2, + 0xd8, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x14, 0x14, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x41, 0x11, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, 0x64, 0x74, + 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, 0xe2, 0xf1, + 0xff, +/* 0x00, 0x0e, 0x35, 0x4f, 0x62, 0x71, 0x7f, 0x8b, + * 0x96, 0xa0, 0xa9, 0xb2, 0xbb, 0xc3, 0xca, 0xd2, + * 0xd8, */ + 0x10, 0x0b, 0x01, 0x10, + 0x10, 0x0d, 0x01, 0x11, + 0x10, 0x0c, 0x01, 0x1c, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; +/* et31x110 - Trust 120 SpaceCam */ +static const u8 spacecam_init[] = { + 0x04, 0x05, 0x01, 0x01, + 0x04, 0x04, 0x01, 0x01, + 0x04, 0x06, 0x01, 0x04, + 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, + 0x05, 0x05, 0x01, 0x00, + 0, 0, 0 +}; +static const u8 spacecam_start[] = { + 0x04, 0x06, 0x01, 0x44, + 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, + 0xef, 0x0e, 0x00, 0x74, 0x01, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x3e, 0x00, 0x24, + 0x03, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xa0, 0x48, 0xc3, 0x02, 0x88, 0x0c, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x06, 0x00, 0x08, + 0x00, 0x32, 0x01, 0x01, 0x00, 0x16, 0x00, 0x04, + 0x00, 0x4b, 0x00, 0x7c, 0x00, 0x80, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x00, 0x06, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x83, 0x02, 0x20, 0x00, 0x11, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1d, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x2d, 0x00, 0x62, + 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, 0x20, + 0x01, 0x60, 0x01, 0x00, 0x00, + 0x04, 0x06, 0x01, 0xc0, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x02, 0x00, 0x11, 0x48, 0x58, 0x9e, 0x48, 0x58, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x36, 0x05, 0x01, 0xf2, 0x86, 0x65, + 0x40, + 0x00, 0x80, 0x01, 0xa0, + 0x10, 0x1a, 0x01, 0x00, + 0x00, 0x91, 0x02, 0x32, 0x01, + 0x00, 0x03, 0x02, 0x08, 0x02, + 0x10, 0x00, 0x01, 0x83, + 0x10, 0x8f, 0x0c, 0x62, 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, + 0x20, 0x01, 0x60, 0x01, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x64, 0x99, 0xc0, 0xe2, 0xf9, 0xf9, 0xf9, + 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, + 0xf9, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x13, 0x13, + 0x10, 0x03, 0x01, 0x06, + 0x10, 0x41, 0x11, 0x00, 0x64, 0x99, 0xc0, 0xe2, 0xf9, 0xf9, 0xf9, + 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, + 0xf9, + 0x10, 0x0b, 0x01, 0x08, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1f, + 0x04, 0x06, 0x01, 0xc3, + 0x04, 0x05, 0x01, 0x40, + 0x04, 0x04, 0x01, 0x40, + 0, 0, 0 +}; +/* et31x110 - pas106 - other Trust SpaceCam120 */ +static const u8 spacecam2_start[] = { + 0x04, 0x06, 0x01, 0x44, + 0x04, 0x06, 0x01, 0x00, + 0x00, 0x00, 0x40, 0x14, 0x83, 0x00, 0xba, 0x01, 0x10, 0x00, 0x4f, + 0xef, 0x00, 0x00, 0x60, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x06, 0x00, 0xfc, + 0x01, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb8, 0x48, 0x0f, 0x04, 0x88, 0x14, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x01, 0x00, 0x03, + 0x00, 0x24, 0x01, 0x01, 0x00, 0x16, 0x00, 0x04, + 0x00, 0x4b, 0x00, 0x76, 0x00, 0x86, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x61, 0x00, + 0x05, 0x00, 0x06, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x80, 0x02, 0x20, 0x00, 0x13, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1d, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x62, + 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, 0x20, + 0x01, 0x60, 0x01, 0x00, 0x00, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x04, 0x04, 0x01, 0x40, + 0x04, 0x04, 0x01, 0x00, + I2C0, 0x40, 0x0c, 0x02, 0x0c, 0x12, 0x07, 0x00, 0x00, 0x00, 0x05, + 0x00, 0x00, 0x05, 0x05, + I2C0, 0x40, 0x02, 0x11, 0x06, + I2C0, 0x40, 0x02, 0x14, 0x00, + I2C0, 0x40, 0x02, 0x13, 0x01, /* i2c end */ + 0x02, 0x00, 0x11, 0x48, 0x58, 0x9e, 0x48, 0x58, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x36, 0x05, 0x01, 0xf2, 0x86, 0x65, + 0x40, + I2C0, 0x40, 0x02, 0x02, 0x0c, /* pixel clock */ + I2C0, 0x40, 0x02, 0x0f, 0x00, + I2C0, 0x40, 0x02, 0x13, 0x01, /* i2c end */ + 0x10, 0x00, 0x01, 0x01, + 0x10, 0x8f, 0x0c, 0x62, 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, + 0x20, 0x01, 0x60, 0x01, + I2C0, 0x40, 0x02, 0x05, 0x0f, /* exposure */ + I2C0, 0x40, 0x02, 0x13, 0x01, /* i2c end */ + I2C0, 0x40, 0x07, 0x09, 0x0b, 0x0f, 0x05, 0x05, 0x0f, 0x00, + /* gains */ + I2C0, 0x40, 0x03, 0x12, 0x04, 0x01, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x17, 0x3f, 0x69, 0x7b, 0x8c, 0x9a, 0xa7, + 0xb3, 0xbf, 0xc9, 0xd3, 0xdd, 0xe6, 0xef, 0xf7, + 0xf9, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x13, 0x13, + 0x10, 0x03, 0x01, 0x06, + 0x10, 0x41, 0x11, 0x00, 0x17, 0x3f, 0x69, 0x7b, 0x8c, 0x9a, 0xa7, + 0xb3, 0xbf, 0xc9, 0xd3, 0xdd, 0xe6, 0xef, 0xf7, + 0xf9, + 0x10, 0x0b, 0x01, 0x11, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x14, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x05, 0x01, 0x61, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* nw802 - Conceptronic Video Pro */ +static const u8 cvideopro_start[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x54, 0x96, 0x98, 0xf9, 0x02, 0x18, 0x00, 0x4c, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x0b, 0x00, 0x1b, 0x00, 0xc8, 0x00, 0xf4, + 0x05, 0xb4, 0x00, 0xcc, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa2, 0x00, 0xc6, 0x00, 0x60, 0x00, 0xc6, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0xae, 0x00, 0xd2, 0x00, 0xae, 0x00, 0xd2, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa8, 0x00, 0xc0, 0x00, 0x66, 0x00, 0xc0, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x0a, 0x00, 0x54, 0x00, 0x0a, 0x00, 0x54, + 0x00, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, + 0x00, 0x5d, 0x00, 0xc7, 0x00, 0x7e, 0x00, 0x30, + 0x00, 0x80, 0x1f, 0x98, 0x43, 0x3f, 0x0d, 0x88, 0x20, 0x80, 0x3f, + 0x47, 0xaf, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x0c, 0x00, 0x1c, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x24, 0x00, 0x4a, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0xff, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa0, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xe0, 0x00, 0x0c, + 0x00, 0x52, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x8c, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x3f, 0x06, 0xf2, 0x8f, 0xf0, + 0x40, + 0x10, 0x1a, 0x01, 0x03, + 0x10, 0x00, 0x01, 0xac, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x3b, 0x01, + 0x10, 0x11, 0x08, 0x61, 0x00, 0xe0, 0x00, 0x49, 0x00, 0xa8, 0x00, + 0x10, 0x1f, 0x06, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x1d, 0x02, 0x40, 0x06, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x46, 0x62, 0x76, 0x86, 0x94, 0xa0, + 0xab, 0xb6, 0xbf, 0xc8, 0xcf, 0xd7, 0xdc, 0xdc, + 0xdc, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x12, 0x12, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x46, 0x62, 0x76, 0x86, 0x94, 0xa0, + 0xab, 0xb6, 0xbf, 0xc8, 0xcf, 0xd7, 0xdc, 0xdc, + 0xdc, + 0x10, 0x0b, 0x01, 0x09, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x2f, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* nw802 - D-link dru-350c cam */ +static const u8 dlink_start[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x10, 0x00, 0x00, 0x92, 0x03, 0x10, 0x00, 0x4d, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb4, 0x6f, 0x3f, 0x0f, 0x88, 0x20, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x01, 0x00, 0x16, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x10, 0x00, 0x36, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x21, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa1, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xc0, 0x00, 0x14, + 0x02, 0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x01, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x10, 0x02, 0xf2, 0x8f, 0x78, + 0x40, + 0x10, 0x1a, 0x01, 0x00, + 0x10, 0x00, 0x01, 0xad, + 0x00, 0x00, 0x01, 0x08, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x51, 0x00, 0xf0, 0x00, 0x3d, 0x00, 0xb4, 0x00, + 0x10, 0x1d, 0x08, 0x40, 0x06, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x0e, 0x01, 0x20, + 0x10, 0x41, 0x11, 0x00, 0x07, 0x1e, 0x38, 0x4d, 0x60, 0x70, 0x7f, + 0x8e, 0x9b, 0xa8, 0xb4, 0xbf, 0xca, 0xd5, 0xdf, + 0xea, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x11, 0x11, + 0x10, 0x03, 0x01, 0x10, + 0x10, 0x41, 0x11, 0x00, 0x07, 0x1e, 0x38, 0x4d, 0x60, 0x70, 0x7f, + 0x8e, 0x9b, 0xa8, 0xb4, 0xbf, 0xca, 0xd5, 0xdf, + 0xea, + 0x10, 0x0b, 0x01, 0x19, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1e, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* 06a5:d001 - nw801 - Sony + * Plustek Opticam 500U or ProLink DS3303u (Hitachi HD49322BF) */ +/*fixme: 320x240 only*/ +static const u8 ds3303_start[] = { + 0x05, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x16, 0x00, 0x00, 0xf9, 0x02, 0x11, 0x00, 0x0e, + 0x01, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x22, 0xb4, 0x6f, 0x3f, 0x0f, 0x88, 0x20, 0x08, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa9, 0xa8, 0x1f, 0x00, + 0x0d, 0x02, 0x07, 0x00, 0x01, 0x00, 0x19, 0x00, + 0xf2, 0x00, 0x18, 0x06, 0x10, 0x06, 0x10, 0x00, + 0x36, 0x00, + 0x02, 0x00, 0x12, 0x03, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0x50, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x05, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0xff, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x2f, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x1f, 0x10, 0x08, 0x0a, + 0x0a, 0x51, 0x00, 0xf1, 0x00, 0x3c, 0x00, 0xb4, + 0x00, 0x01, 0x15, 0xfd, 0x07, 0x3d, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x8c, 0x04, 0x01, 0x20, + 0x02, 0x00, 0x03, 0x00, 0x20, 0x00, 0x00, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, 0x03, + 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, 0xf7, + 0x10, 0x40, 0x40, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, 0x80, + 0x00, 0x2d, 0x46, 0x58, 0x67, 0x74, 0x7f, 0x88, + 0x94, 0x9d, 0xa6, 0xae, 0xb5, 0xbd, 0xc4, 0xcb, + 0xd1, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, 0x64, + 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, 0xe2, + 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x10, 0x80, 0x22, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x3f, 0x01, + 0x00, 0x00, 0xef, 0x00, 0x02, 0x0a, 0x82, 0x02, + 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, 0x01, + 0xf0, 0x00, + + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x3f, 0x00, 0xf2, 0x8f, 0x81, + 0x40, + 0x10, 0x1a, 0x01, 0x15, + 0x10, 0x00, 0x01, 0x2f, + 0x10, 0x8c, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x61, 0x00, 0xe0, 0x00, 0x49, 0x00, 0xa8, 0x00, + 0x10, 0x26, 0x06, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x24, 0x02, 0x40, 0x06, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x48, 0x11, 0x00, 0x15, 0x40, 0x67, 0x84, 0x9d, 0xb2, 0xc6, + 0xd6, 0xe7, 0xf6, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, + 0xf9, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x16, 0x16, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x48, 0x11, 0x00, 0x15, 0x40, 0x67, 0x84, 0x9d, 0xb2, 0xc6, + 0xd6, 0xe7, 0xf6, 0xf9, 0xf9, 0xf9, 0xf9, 0xf9, + 0xf9, + 0x10, 0x0b, 0x01, 0x26, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1c, + 0x05, 0x06, 0x01, 0x03, + 0x05, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* 06a5:d001 - nw802 - Panasonic + * GP-KR651US (Philips TDA8786) */ +static const u8 kr651_start_1[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x44, 0x96, 0x98, 0xf9, 0x02, 0x18, 0x00, 0x48, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x0b, 0x00, 0x1b, 0x00, 0xc8, 0x00, 0xf4, + 0x05, 0xb4, 0x00, 0xcc, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa2, 0x00, 0xc6, 0x00, 0x60, 0x00, 0xc6, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0xae, 0x00, 0xd2, 0x00, 0xae, 0x00, 0xd2, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa8, 0x00, 0xc0, 0x00, 0x66, 0x00, 0xc0, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x0a, 0x00, 0x54, 0x00, 0x0a, 0x00, 0x54, + 0x00, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, + 0x00, 0x5d, 0x00, 0xc7, 0x00, 0x7e, 0x00, 0x30, + 0x00, 0x80, 0x1f, 0x18, 0x43, 0x3f, 0x0d, 0x88, 0x20, 0x80, 0x3f, + 0x47, 0xaf, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x0c, 0x00, 0x1c, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x24, 0x00, 0x4a, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x02, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x21, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa0, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xe0, 0x00, 0x0c, + 0x00, 0x52, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0, 0, 0 +}; +static const u8 kr651_start_qvga[] = { + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x10, 0x02, 0xf2, 0x8f, 0x78, + 0x40, + 0x10, 0x1a, 0x01, 0x03, + 0x10, 0x00, 0x01, 0xac, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x29, 0x00, 0x18, 0x01, 0x1f, 0x00, 0xd2, 0x00, + 0x10, 0x1d, 0x06, 0xe0, 0x00, 0x0c, 0x00, 0x52, 0x00, + 0x10, 0x1d, 0x02, 0x28, 0x01, + 0, 0, 0 +}; +static const u8 kr651_start_vga[] = { + 0x02, 0x00, 0x11, 0x78, 0xa0, 0x8c, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x30, 0x03, 0x01, 0x82, 0x82, 0x98, + 0x80, + 0x10, 0x1a, 0x01, 0x03, + 0x10, 0x00, 0x01, 0xa0, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x7f, 0x02, 0x00, 0x00, 0xdf, 0x01, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x51, 0x00, 0x30, 0x02, 0x3d, 0x00, 0xa4, 0x01, + 0x10, 0x1d, 0x06, 0xe0, 0x00, 0x0c, 0x00, 0x52, 0x00, + 0x10, 0x1d, 0x02, 0x68, 0x00, +}; +static const u8 kr651_start_2[] = { + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x11, 0x3c, 0x5c, 0x74, 0x88, 0x99, 0xa8, + 0xb7, 0xc4, 0xd0, 0xdc, 0xdc, 0xdc, 0xdc, 0xdc, + 0xdc, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x0c, 0x0c, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x41, 0x11, 0x00, 0x11, 0x3c, 0x5c, 0x74, 0x88, 0x99, 0xa8, + 0xb7, 0xc4, 0xd0, 0xdc, 0xdc, 0xdc, 0xdc, 0xdc, + 0xdc, + 0x10, 0x0b, 0x01, 0x10, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x2d, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* nw802 - iRez Kritter cam */ +static const u8 kritter_start[] = { + 0x04, 0x06, 0x01, 0x06, + 0x00, 0x00, 0x40, 0x44, 0x96, 0x98, 0x94, 0x03, 0x18, 0x00, 0x48, + 0x0f, 0x1e, 0x00, 0x0c, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x0b, 0x00, 0x1b, 0x00, 0x0a, 0x01, 0x28, + 0x07, 0xb4, 0x00, 0xcc, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa2, 0x00, 0xc6, 0x00, 0x60, 0x00, 0xc6, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0xae, 0x00, 0xd2, 0x00, 0xae, 0x00, 0xd2, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa8, 0x00, 0xc0, 0x00, 0x66, 0x00, 0xc0, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x0a, 0x00, 0x54, 0x00, 0x0a, 0x00, 0x54, + 0x00, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, + 0x00, 0x5d, 0x00, 0x0e, 0x00, 0x7e, 0x00, 0x30, + 0x00, 0x80, 0x1f, 0x18, 0x43, 0x3f, 0x0d, 0x88, 0x20, 0x80, 0x3f, + 0x47, 0xaf, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0b, 0x02, 0x0c, 0x00, 0x1c, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x24, 0x00, 0x4a, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x02, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0xff, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa0, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xe0, 0x00, 0x0c, + 0x00, 0x52, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x8c, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x3f, 0x06, 0xf2, 0x8f, 0xf0, + 0x40, + 0x10, 0x1a, 0x01, 0x03, + 0x10, 0x00, 0x01, 0xaf, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x3b, 0x01, + 0x10, 0x11, 0x08, 0x61, 0x00, 0xe0, 0x00, 0x49, 0x00, 0xa8, 0x00, + 0x10, 0x1d, 0x06, 0xe0, 0x00, 0x0c, 0x00, 0x52, 0x00, + 0x10, 0x1d, 0x02, 0x00, 0x00, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x0d, 0x36, 0x4e, 0x60, 0x6f, 0x7b, 0x86, + 0x90, 0x98, 0xa1, 0xa9, 0xb1, 0xb7, 0xbe, 0xc4, + 0xcb, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x0d, 0x0d, + 0x10, 0x03, 0x01, 0x02, + 0x10, 0x41, 0x11, 0x00, 0x0d, 0x36, 0x4e, 0x60, 0x6f, 0x7b, 0x86, + 0x90, 0x98, 0xa1, 0xa9, 0xb1, 0xb7, 0xbe, 0xc4, + 0xcb, + 0x10, 0x0b, 0x01, 0x17, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1e, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* nw802 - Mustek Wcam 300 mini */ +static const u8 mustek_start[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x10, 0x00, 0x00, 0x92, 0x03, 0x10, 0x00, 0x4d, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb4, 0x6f, 0x3f, 0x0f, 0x88, 0x20, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x01, 0x00, 0x16, 0x00, 0x94, + 0x00, 0x10, 0x06, 0xfc, 0x05, 0x0c, 0x06, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x21, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa1, 0x02, 0x80, 0x00, 0x13, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xc0, 0x00, 0x14, + 0x02, 0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x01, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x10, 0x02, 0xf2, 0x8f, 0x78, + 0x40, + 0x10, 0x1a, 0x01, 0x00, + 0x10, 0x00, 0x01, 0xad, + 0x00, 0x00, 0x01, 0x08, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1d, 0x08, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, + 0x10, 0x0e, 0x01, 0x0f, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x29, 0x4a, 0x64, 0x7a, 0x8c, 0x9e, + 0xad, 0xba, 0xc7, 0xd3, 0xde, 0xe8, 0xf1, 0xf9, + 0xff, + 0x10, 0x0f, 0x02, 0x11, 0x11, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x29, 0x4a, 0x64, 0x7a, 0x8c, 0x9e, + 0xad, 0xba, 0xc7, 0xd3, 0xde, 0xe8, 0xf1, 0xf9, + 0xff, + 0x10, 0x0b, 0x01, 0x1c, + 0x10, 0x0d, 0x01, 0x1a, + 0x10, 0x0c, 0x01, 0x34, + 0x04, 0x05, 0x01, 0x61, + 0x04, 0x04, 0x01, 0x40, + 0x04, 0x06, 0x01, 0x03, + 0, 0, 0 +}; + +/* nw802 - Scope USB Microscope M2 (ProScope) (Hitachi HD49322BF) */ +static const u8 proscope_init[] = { + 0x04, 0x05, 0x01, 0x21, + 0x04, 0x04, 0x01, 0x01, + 0, 0, 0 +}; +static const u8 proscope_start_1[] = { + 0x04, 0x06, 0x01, 0x04, + 0x00, 0x00, 0x40, 0x10, 0x01, 0x00, 0xf9, 0x02, 0x10, 0x00, 0x04, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x08, 0x00, 0x17, 0x00, 0xce, 0x00, 0xf4, + 0x05, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0xce, 0x00, 0xf8, 0x03, 0x3e, 0x00, 0x86, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0xb6, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xf6, 0x03, 0x34, 0x04, 0xf6, 0x03, 0x34, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xe8, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb4, 0x6f, 0x1f, 0x0f, 0x08, 0x20, 0xa8, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x01, 0x00, 0x19, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x10, 0x00, 0x36, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x21, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xad, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x1f, 0x10, 0x08, 0x0a, + 0x0a, 0x51, 0x00, 0xf1, 0x00, 0x3c, 0x00, 0xb4, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x8c, 0x04, 0x01, + 0x20, 0x02, 0x00, 0x03, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x2d, 0x46, 0x58, 0x67, 0x74, 0x7f, + 0x88, 0x94, 0x9d, 0xa6, 0xae, 0xb5, 0xbd, 0xc4, + 0xcb, 0xd1, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x3f, + 0x01, 0x00, 0x00, 0xef, 0x00, 0x09, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0, 0, 0 +}; +static const u8 proscope_start_qvga[] = { + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x9e, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x10, 0x02, 0xf2, 0x8f, 0x78, + 0x40, + 0x10, 0x1a, 0x01, 0x06, + 0x00, 0x03, 0x02, 0xf9, 0x02, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1d, 0x08, 0xc0, 0x0d, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x0e, 0x01, 0x10, + 0, 0, 0 +}; +static const u8 proscope_start_vga[] = { + 0x00, 0x03, 0x02, 0xf9, 0x02, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x7f, 0x02, 0x00, 0x00, 0xdf, 0x01, + 0x02, 0x00, 0x11, 0x78, 0xa0, 0x8c, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x16, 0x00, 0x00, 0x82, 0x84, 0x00, + 0x80, + 0x10, 0x1a, 0x01, 0x06, + 0x10, 0x00, 0x01, 0xa1, + 0x10, 0x1b, 0x02, 0x00, 0x00, + 0x10, 0x1d, 0x08, 0xc0, 0x0d, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x7f, 0x02, 0x00, 0x00, 0xdf, 0x01, + 0x10, 0x0e, 0x01, 0x10, + 0x10, 0x41, 0x11, 0x00, 0x10, 0x51, 0x6e, 0x83, 0x93, 0xa1, 0xae, + 0xb9, 0xc3, 0xcc, 0xd4, 0xdd, 0xe4, 0xeb, 0xf2, + 0xf9, + 0x10, 0x03, 0x01, 0x00, + 0, 0, 0 +}; +static const u8 proscope_start_2[] = { + 0x10, 0x0f, 0x02, 0x0c, 0x0c, + 0x10, 0x03, 0x01, 0x0c, + 0x10, 0x41, 0x11, 0x00, 0x10, 0x51, 0x6e, 0x83, 0x93, 0xa1, 0xae, + 0xb9, 0xc3, 0xcc, 0xd4, 0xdd, 0xe4, 0xeb, 0xf2, + 0xf9, + 0x10, 0x0b, 0x01, 0x0b, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1b, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x05, 0x01, 0x21, + 0x04, 0x04, 0x01, 0x00, + 0, 0, 0 +}; + +/* nw800 - hv7121b? (seems pas106) - Divio Chicony TwinkleCam */ +static const u8 twinkle_start[] = { + 0x04, 0x06, 0x01, 0x44, + 0x04, 0x06, 0x01, 0x00, + 0x00, 0x00, 0x40, 0x14, 0x83, 0x00, 0xba, 0x01, 0x10, 0x00, 0x4f, + 0xef, 0x00, 0x00, 0x60, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x06, 0x00, 0xfc, + 0x01, 0x3e, 0x00, 0x86, 0x00, 0x3e, 0x00, 0x86, + 0x00, 0x3e, 0x00, 0x86, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x56, 0x00, 0x9e, + 0x00, 0x56, 0x00, 0x9e, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x6e, 0x00, 0xb6, 0x00, 0x6e, 0x00, 0x78, + 0x04, 0x6e, 0x00, 0xb6, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xca, 0x03, 0x46, 0x04, 0xca, 0x03, 0x46, + 0x04, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x00, 0xf0, + 0x00, 0x3e, 0x00, 0xaa, 0x00, 0x88, 0x00, 0x2e, + 0x00, 0x80, 0x1f, 0xb8, 0x48, 0x0f, 0x04, 0x88, 0x14, 0x68, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xa8, 0x01, 0x00, 0x03, + 0x00, 0x24, 0x01, 0x01, 0x00, 0x16, 0x00, 0x04, + 0x00, 0x4b, 0x00, 0x76, 0x00, 0x86, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0x61, 0x00, + 0x05, 0x00, 0x06, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x1b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0x80, 0x02, 0x20, 0x00, 0x11, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x08, + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x10, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x00, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1d, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x62, + 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, 0x20, + 0x01, 0x60, 0x01, 0x00, 0x00, + + 0x10, 0x85, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + 0x04, 0x04, 0x01, 0x10, + 0x04, 0x04, 0x01, 0x00, + 0x04, 0x05, 0x01, 0x61, + 0x04, 0x04, 0x01, 0x01, + I2C0, 0x40, 0x0c, 0x02, 0x0c, 0x12, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0a, + I2C0, 0x40, 0x02, 0x11, 0x06, + I2C0, 0x40, 0x02, 0x14, 0x00, + I2C0, 0x40, 0x02, 0x13, 0x01, /* i2c end */ + I2C0, 0x40, 0x02, 0x07, 0x01, + 0x02, 0x00, 0x11, 0x48, 0x58, 0x9e, 0x48, 0x58, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x36, 0x05, 0x01, 0xf2, 0x86, 0x65, + 0x40, + I2C0, 0x40, 0x02, 0x02, 0x0c, + I2C0, 0x40, 0x02, 0x13, 0x01, + 0x10, 0x00, 0x01, 0x01, + 0x10, 0x8f, 0x0c, 0x62, 0x01, 0x24, 0x01, 0x62, 0x01, 0x24, 0x01, + 0x20, 0x01, 0x60, 0x01, + I2C0, 0x40, 0x02, 0x05, 0x0f, + I2C0, 0x40, 0x02, 0x13, 0x01, + I2C0, 0x40, 0x08, 0x08, 0x04, 0x0b, 0x01, 0x01, 0x02, 0x00, 0x17, + I2C0, 0x40, 0x03, 0x12, 0x00, 0x01, + 0x10, 0x11, 0x08, 0x00, 0x00, 0x5f, 0x01, 0x00, 0x00, 0x1f, 0x01, + I2C0, 0x40, 0x02, 0x12, 0x00, + I2C0, 0x40, 0x02, 0x0e, 0x00, + I2C0, 0x40, 0x02, 0x11, 0x06, + 0x10, 0x41, 0x11, 0x00, 0x17, 0x3f, 0x69, 0x7b, 0x8c, 0x9a, 0xa7, + 0xb3, 0xbf, 0xc9, 0xd3, 0xdd, 0xe6, 0xef, 0xf7, + 0xf9, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x0c, 0x0c, + 0x10, 0x03, 0x01, 0x06, + 0x10, 0x41, 0x11, 0x00, 0x17, 0x3f, 0x69, 0x7b, 0x8c, 0x9a, 0xa7, + 0xb3, 0xbf, 0xc9, 0xd3, 0xdd, 0xe6, 0xef, 0xf7, + 0xf9, + 0x10, 0x0b, 0x01, 0x19, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x0d, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x05, 0x01, 0x61, + 0x04, 0x04, 0x01, 0x41, + 0, 0, 0 +}; + +/* nw802 dvc-v6 */ +static const u8 dvcv6_start[] = { + 0x04, 0x06, 0x01, 0x06, + 0x00, 0x00, 0x40, 0x54, 0x96, 0x98, 0xf9, 0x02, 0x18, 0x00, 0x4c, + 0x0f, 0x1f, 0x00, 0x0d, 0x02, 0x01, 0x00, 0x19, + 0x00, 0x01, 0x00, 0x19, 0x00, 0x01, 0x00, 0x19, + 0x00, 0x0b, 0x00, 0x1b, 0x00, 0xc8, 0x00, 0xf4, + 0x05, 0xb4, 0x00, 0xcc, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa2, 0x00, 0xc6, 0x00, 0x60, 0x00, 0xc6, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x40, 0x40, 0x00, 0xae, 0x00, 0xd2, 0x00, 0xae, 0x00, 0xd2, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0xa8, 0x00, 0xc0, 0x00, 0x66, 0x00, 0xc0, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x0a, 0x00, 0x54, 0x00, 0x0a, 0x00, 0x54, + 0x00, 0x10, 0x00, 0x36, 0x00, 0xd2, 0x00, 0xee, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, + 0x00, 0x5d, 0x00, 0xc7, 0x00, 0x7e, 0x00, 0x30, + 0x00, 0x80, 0x1f, 0x98, 0x43, 0x3f, 0x0d, 0x88, 0x20, 0x80, 0x3f, + 0x47, 0xaf, 0x00, 0x00, 0xa8, 0x08, 0x00, 0x11, + 0x00, 0x0c, 0x02, 0x0c, 0x00, 0x1c, 0x00, 0x94, + 0x00, 0x10, 0x06, 0x24, 0x00, 0x4a, 0x00, + 0x02, 0x00, 0x12, 0x78, 0xa0, 0x9e, 0x78, 0xa0, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x18, 0x0b, 0x06, 0x62, 0x82, 0xa0, + 0x40, 0x20, + 0x03, 0x00, 0x03, 0x03, 0x00, 0x00, + 0x04, 0x00, 0x07, 0x01, 0x10, 0x00, 0x00, 0x00, 0xff, 0x00, + 0x06, 0x00, 0x02, 0x09, 0x99, + 0x08, 0x00, 0x15, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x40, 0xa0, 0x02, 0x80, 0x00, 0x12, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0x08, 0x0a, + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x49, 0x13, 0x00, 0x00, 0xe0, 0x00, 0x0c, + 0x00, 0x52, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x20, 0x10, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x20, 0x10, 0x06, + 0xf7, 0xee, 0x1c, 0x1c, 0xe9, 0xfc, 0x10, 0x80, + 0x10, 0x40, 0x40, 0x80, 0x00, 0x05, 0x35, 0x5e, 0x78, 0x8b, 0x99, + 0xa4, 0xae, 0xb5, 0xbc, 0xc1, 0xc6, 0xc9, 0xcc, + 0xcf, 0xd0, 0x00, 0x11, 0x22, 0x32, 0x43, 0x54, + 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, 0xd2, + 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, 0x43, + 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, 0xc3, + 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x11, 0x22, 0x32, + 0x43, 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb3, + 0x10, 0x80, 0x1b, 0xc3, 0xd2, 0xe2, 0xf1, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x05, 0x82, + 0x02, 0xe4, 0x01, 0x40, 0x01, 0xf0, 0x00, 0x40, + 0x01, 0xf0, 0x00, + 0x00, 0x03, 0x02, 0x94, 0x03, + 0x00, 0x1d, 0x04, 0x0a, 0x01, 0x28, 0x07, + 0x00, 0x7b, 0x02, 0xe0, 0x00, + 0x10, 0x8d, 0x01, 0x00, + 0x00, 0x09, 0x04, 0x1e, 0x00, 0x0c, 0x02, + 0x00, 0x91, 0x02, 0x0b, 0x02, + 0x10, 0x00, 0x01, 0xaf, + 0x02, 0x00, 0x11, 0x3c, 0x50, 0x8f, 0x3c, 0x50, 0x00, 0x00, 0x00, + 0x00, 0x78, 0x3f, 0x3f, 0x06, 0xf2, 0x8f, 0xf0, + 0x40, + 0x10, 0x1a, 0x01, 0x02, + 0x10, 0x00, 0x01, 0xaf, + 0x10, 0x85, 0x08, 0x00, 0x00, 0x3f, 0x01, 0x00, 0x00, 0xef, 0x00, + 0x10, 0x1b, 0x02, 0x07, 0x01, + 0x10, 0x11, 0x08, 0x61, 0x00, 0xe0, 0x00, 0x49, 0x00, 0xa8, 0x00, + 0x10, 0x1f, 0x06, 0x01, 0x20, 0x02, 0xe8, 0x03, 0x00, + 0x10, 0x1d, 0x02, 0x40, 0x06, + 0x10, 0x0e, 0x01, 0x08, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x54, 0x6f, 0x82, 0x91, 0x9f, 0xaa, + 0xb4, 0xbd, 0xc5, 0xcd, 0xd5, 0xdb, 0xdc, 0xdc, + 0xdc, + 0x10, 0x03, 0x01, 0x00, + 0x10, 0x0f, 0x02, 0x12, 0x12, + 0x10, 0x03, 0x01, 0x11, + 0x10, 0x41, 0x11, 0x00, 0x0f, 0x54, 0x6f, 0x82, 0x91, 0x9f, 0xaa, + 0xb4, 0xbd, 0xc5, 0xcd, 0xd5, 0xdb, 0xdc, 0xdc, + 0xdc, + 0x10, 0x0b, 0x01, 0x16, + 0x10, 0x0d, 0x01, 0x10, + 0x10, 0x0c, 0x01, 0x1a, + 0x04, 0x06, 0x01, 0x03, + 0x04, 0x04, 0x01, 0x00, +}; + +static const u8 *webcam_start[] = { + [Generic800] = nw800_start, + [SpaceCam] = spacecam_start, + [SpaceCam2] = spacecam2_start, + [Cvideopro] = cvideopro_start, + [Dlink350c] = dlink_start, + [DS3303u] = ds3303_start, + [Kr651us] = kr651_start_1, + [Kritter] = kritter_start, + [Mustek300] = mustek_start, + [Proscope] = proscope_start_1, + [Twinkle] = twinkle_start, + [DvcV6] = dvcv6_start, + [P35u] = nw801_start_1, + [Generic802] = nw802_start, +}; + +/* -- write a register -- */ +static void reg_w(struct gspca_dev *gspca_dev, + u16 index, + const u8 *data, + int len) +{ + struct usb_device *dev = gspca_dev->dev; + int ret; + + if (gspca_dev->usb_err < 0) + return; + if (len == 1) + PDEBUG(D_USBO, "SET 00 0000 %04x %02x", index, *data); + else + PDEBUG(D_USBO, "SET 00 0000 %04x %02x %02x ...", + index, *data, data[1]); + memcpy(gspca_dev->usb_buf, data, len); + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x00, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, /* value */ + index, + gspca_dev->usb_buf, + len, + 500); + if (ret < 0) { + err("reg_w err %d", ret); + gspca_dev->usb_err = ret; + } +} + +/* -- read registers in usb_buf -- */ +static void reg_r(struct gspca_dev *gspca_dev, + u16 index, + int len) +{ + struct usb_device *dev = gspca_dev->dev; + int ret; + + if (gspca_dev->usb_err < 0) + return; + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, index, + gspca_dev->usb_buf, len, 500); + if (ret < 0) { + err("reg_r err %d", ret); + gspca_dev->usb_err = ret; + return; + } + if (len == 1) + PDEBUG(D_USBI, "GET 00 0000 %04x %02x", + index, gspca_dev->usb_buf[0]); + else + PDEBUG(D_USBI, "GET 00 0000 %04x %02x %02x ..", + index, gspca_dev->usb_buf[0], + gspca_dev->usb_buf[1]); +} + +static void i2c_w(struct gspca_dev *gspca_dev, + u8 i2c_addr, + const u8 *data, + int len) +{ + u8 val[2]; + int i; + + reg_w(gspca_dev, 0x0600, data + 1, len - 1); + reg_w(gspca_dev, 0x0600, data, len); + val[0] = len; + val[1] = i2c_addr; + reg_w(gspca_dev, 0x0502, val, 2); + val[0] = 0x01; + reg_w(gspca_dev, 0x0501, val, 1); + for (i = 5; --i >= 0; ) { + msleep(4); + reg_r(gspca_dev, 0x0505, 1); + if (gspca_dev->usb_err < 0) + return; + if (gspca_dev->usb_buf[0] == 0) + return; + } + gspca_dev->usb_err = -ETIME; +} + +static void reg_w_buf(struct gspca_dev *gspca_dev, + const u8 *cmd) +{ + u16 reg; + int len; + + for (;;) { + reg = *cmd++ << 8; + reg += *cmd++; + len = *cmd++; + if (len == 0) + break; + if (cmd[-3] != I2C0) + reg_w(gspca_dev, reg, cmd, len); + else + i2c_w(gspca_dev, reg, cmd, len); + cmd += len; + } +} + +static int swap_bits(int v) +{ + int r, i; + + r = 0; + for (i = 0; i < 8; i++) { + r <<= 1; + if (v & 1) + r++; + v >>= 1; + } + return r; +} + +static void setgain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 val, v[2]; + + val = sd->ctrls[GAIN].val; + switch (sd->webcam) { + case P35u: + /* Note the control goes from 0-255 not 0-127, but anything + above 127 just means amplifying noise */ + val >>= 1; /* 0 - 255 -> 0 - 127 */ + reg_w(gspca_dev, 0x1026, &val, 1); + break; + case Kr651us: + /* 0 - 253 */ + val = swap_bits(val); + v[0] = val << 3; + v[1] = val >> 5; + reg_w(gspca_dev, 0x101d, v, 2); /* SIF reg0/1 (AGC) */ + break; + } +} + +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + s16 val; + u8 v[2]; + + val = sd->ctrls[EXPOSURE].val; + switch (sd->webcam) { + case P35u: + v[0] = ((9 - val) << 3) | 0x01; + reg_w(gspca_dev, 0x1019, v, 1); + break; + case Cvideopro: + case DvcV6: + case Kritter: + case Kr651us: + v[0] = val; + v[1] = val >> 8; + reg_w(gspca_dev, 0x101b, v, 2); + break; + } +} + +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int w, h; + + if (gspca_dev->ctrl_dis & (1 << AUTOGAIN)) + return; + if (!sd->ctrls[AUTOGAIN].val) { + sd->ag_cnt = -1; + return; + } + sd->ag_cnt = AG_CNT_START; + + reg_r(gspca_dev, 0x1004, 1); + if (gspca_dev->usb_buf[0] & 0x04) { /* if AE_FULL_FRM */ + sd->ae_res = gspca_dev->width * gspca_dev->height; + } else { /* get the AE window size */ + reg_r(gspca_dev, 0x1011, 8); + w = (gspca_dev->usb_buf[1] << 8) + gspca_dev->usb_buf[0] + - (gspca_dev->usb_buf[3] << 8) - gspca_dev->usb_buf[2]; + h = (gspca_dev->usb_buf[5] << 8) + gspca_dev->usb_buf[4] + - (gspca_dev->usb_buf[7] << 8) - gspca_dev->usb_buf[6]; + sd->ae_res = h * w; + if (sd->ae_res == 0) + sd->ae_res = gspca_dev->width * gspca_dev->height; + } +} + +static int nw802_test_reg(struct gspca_dev *gspca_dev, + u16 index, + u8 value) +{ + /* write the value */ + reg_w(gspca_dev, index, &value, 1); + + /* read it */ + reg_r(gspca_dev, index, 1); + + return gspca_dev->usb_buf[0] == value; +} + +/* this function is called at probe time */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if ((unsigned) webcam >= NWEBCAMS) + webcam = 0; + sd->webcam = webcam; + gspca_dev->cam.reverse_alts = 1; + gspca_dev->cam.ctrls = sd->ctrls; + sd->ag_cnt = -1; + + /* + * Autodetect sequence inspired from some log. + * We try to detect what registers exist or not. + * If 0x0500 does not exist => NW802 + * If it does, test 0x109b. If it doesn't exist, + * then it's a NW801. Else, a NW800 + * If a et31x110 (nw800 and 06a5:d800) + * get the sensor ID + */ + if (!nw802_test_reg(gspca_dev, 0x0500, 0x55)) { + sd->bridge = BRIDGE_NW802; + if (sd->webcam == Generic800) + sd->webcam = Generic802; + } else if (!nw802_test_reg(gspca_dev, 0x109b, 0xaa)) { + sd->bridge = BRIDGE_NW801; + if (sd->webcam == Generic800) + sd->webcam = P35u; + } else if (id->idVendor == 0x06a5 && id->idProduct == 0xd800) { + reg_r(gspca_dev, 0x0403, 1); /* GPIO */ + PDEBUG(D_PROBE, "et31x110 sensor type %02x", + gspca_dev->usb_buf[0]); + switch (gspca_dev->usb_buf[0] >> 1) { + case 0x00: /* ?? */ + if (sd->webcam == Generic800) + sd->webcam = SpaceCam; + break; + case 0x01: /* Hynix? */ + if (sd->webcam == Generic800) + sd->webcam = Twinkle; + break; + case 0x0a: /* Pixart */ + if (sd->webcam == Generic800) + sd->webcam = SpaceCam2; + break; + } + } + if (webcam_chip[sd->webcam] != sd->bridge) { + err("Bad webcam type %d for NW80%d", sd->webcam, sd->bridge); + gspca_dev->usb_err = -ENODEV; + return gspca_dev->usb_err; + } + PDEBUG(D_PROBE, "Bridge nw80%d - type: %d", sd->bridge, sd->webcam); + + if (sd->bridge == BRIDGE_NW800) { + switch (sd->webcam) { + case DS3303u: + gspca_dev->cam.cam_mode = cif_mode; /* qvga */ + break; + default: + gspca_dev->cam.cam_mode = &cif_mode[1]; /* cif */ + break; + } + gspca_dev->cam.nmodes = 1; + } else { + gspca_dev->cam.cam_mode = vga_mode; + switch (sd->webcam) { + case Kr651us: + case Proscope: + case P35u: + gspca_dev->cam.nmodes = ARRAY_SIZE(vga_mode); + break; + default: + gspca_dev->cam.nmodes = 1; /* qvga only */ + break; + } + } + switch (sd->webcam) { + case P35u: +/* sd->ctrls[EXPOSURE].max = 9; + * sd->ctrls[EXPOSURE].def = 9; */ + /* coarse expo auto gain function gain minimum, to avoid + * a large settings jump the first auto adjustment */ + sd->ctrls[GAIN].def = 255 / 5 * 2; + break; + case Cvideopro: + case DvcV6: + case Kritter: + gspca_dev->ctrl_dis = (1 << GAIN) | (1 << AUTOGAIN); + /* fall thru */ + case Kr651us: + sd->ctrls[EXPOSURE].max = 315; + sd->ctrls[EXPOSURE].def = 150; + break; + default: + gspca_dev->ctrl_dis = (1 << GAIN) | (1 << EXPOSURE) + | (1 << AUTOGAIN); + break; + } + +#if AUTOGAIN_DEF + if (!(gspca_dev->ctrl_dis & (1 << AUTOGAIN))) + gspca_dev->ctrl_inac = (1 << GAIN) | (1 << EXPOSURE); +#endif + return gspca_dev->usb_err; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->bridge) { + case BRIDGE_NW800: + switch (sd->webcam) { + case SpaceCam: + reg_w_buf(gspca_dev, spacecam_init); + break; + default: + reg_w_buf(gspca_dev, nw800_init); + break; + } + break; + default: + switch (sd->webcam) { + case Mustek300: + case P35u: + case Proscope: + reg_w_buf(gspca_dev, proscope_init); + break; + } + break; + } + return gspca_dev->usb_err; +} + +/* -- start the camera -- */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + const u8 *cmd; + + cmd = webcam_start[sd->webcam]; + reg_w_buf(gspca_dev, cmd); + switch (sd->webcam) { + case P35u: + if (gspca_dev->width == 320) + reg_w_buf(gspca_dev, nw801_start_qvga); + else + reg_w_buf(gspca_dev, nw801_start_vga); + reg_w_buf(gspca_dev, nw801_start_2); + break; + case Kr651us: + if (gspca_dev->width == 320) + reg_w_buf(gspca_dev, kr651_start_qvga); + else + reg_w_buf(gspca_dev, kr651_start_vga); + reg_w_buf(gspca_dev, kr651_start_2); + break; + case Proscope: + if (gspca_dev->width == 320) + reg_w_buf(gspca_dev, proscope_start_qvga); + else + reg_w_buf(gspca_dev, proscope_start_vga); + reg_w_buf(gspca_dev, proscope_start_2); + break; + } + + setgain(gspca_dev); + setexposure(gspca_dev); + setautogain(gspca_dev); + sd->exp_too_high_cnt = 0; + sd->exp_too_low_cnt = 0; + return gspca_dev->usb_err; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 value; + + /* 'go' off */ + if (sd->bridge != BRIDGE_NW801) { + value = 0x02; + reg_w(gspca_dev, 0x0406, &value, 1); + } + + /* LED off */ + switch (sd->webcam) { + case Cvideopro: + case Kr651us: + case DvcV6: + case Kritter: + value = 0xff; + break; + case Dlink350c: + value = 0x21; + break; + case SpaceCam: + case SpaceCam2: + case Proscope: + case Twinkle: + value = 0x01; + break; + default: + return; + } + reg_w(gspca_dev, 0x0404, &value, 1); +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + /* + * frame header = '00 00 hh ww ss xx ff ff' + * with: + * - 'hh': height / 4 + * - 'ww': width / 4 + * - 'ss': frame sequence number c0..dd + */ + if (data[0] == 0x00 && data[1] == 0x00 + && data[6] == 0xff && data[7] == 0xff) { + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); + gspca_frame_add(gspca_dev, FIRST_PACKET, data + 8, len - 8); + } else { + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + } +} + +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->ctrls[AUTOGAIN].val = val; + if (val) + gspca_dev->ctrl_inac = (1 << GAIN) | (1 << EXPOSURE); + else + gspca_dev->ctrl_inac = 0; + if (gspca_dev->streaming) + setautogain(gspca_dev); + return gspca_dev->usb_err; +} + +#include "autogain_functions.h" + +static void do_autogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int luma; + + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + + /* get the average luma */ + reg_r(gspca_dev, sd->bridge == BRIDGE_NW801 ? 0x080d : 0x080c, 4); + luma = (gspca_dev->usb_buf[3] << 24) + (gspca_dev->usb_buf[2] << 16) + + (gspca_dev->usb_buf[1] << 8) + gspca_dev->usb_buf[0]; + luma /= sd->ae_res; + + switch (sd->webcam) { + case P35u: + coarse_grained_expo_autogain(gspca_dev, luma, 100, 5); + break; + default: + auto_gain_n_exposure(gspca_dev, luma, 100, 5, 230, 0); + break; + } +} + +/* V4L2 controls supported by the driver */ +static const struct ctrl sd_ctrls[NCTRLS] = { +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 253, + .step = 1, + .default_value = 128 + }, + .set_control = setgain + }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 9, + .step = 1, + .default_value = 9 + }, + .set_control = setexposure + }, +[AUTOGAIN] = { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Gain", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = AUTOGAIN_DEF, + .flags = V4L2_CTRL_FLAG_UPDATE + }, + .set = sd_setautogain + }, +}; + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, + .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, +}; + +/* -- module initialisation -- */ +static const struct usb_device_id device_table[] = { + {USB_DEVICE(0x046d, 0xd001)}, + {USB_DEVICE(0x0502, 0xd001)}, + {USB_DEVICE(0x052b, 0xd001)}, + {USB_DEVICE(0x055f, 0xd001)}, + {USB_DEVICE(0x06a5, 0x0000)}, + {USB_DEVICE(0x06a5, 0xd001)}, + {USB_DEVICE(0x06a5, 0xd800)}, + {USB_DEVICE(0x06be, 0xd001)}, + {USB_DEVICE(0x0728, 0xd001)}, + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + return usb_register(&sd_driver); +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); + +module_param(webcam, int, 0644); +MODULE_PARM_DESC(webcam, + "Webcam type\n" + "0: generic\n" + "1: Trust 120 SpaceCam\n" + "2: other Trust 120 SpaceCam\n" + "3: Conceptronic Video Pro\n" + "4: D-link dru-350c\n" + "5: Plustek Opticam 500U\n" + "6: Panasonic GP-KR651US\n" + "7: iRez Kritter\n" + "8: Mustek Wcam 300 mini\n" + "9: Scalar USB Microscope M2 (Proscope)\n" + "10: Divio Chicony TwinkleCam\n" + "11: DVC-V6\n"); diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 8ab2c452c25e..fd1b6082c96d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -1,7 +1,7 @@ /** * OV519 driver * - * Copyright (C) 2008 Jean-Francois Moine (http://moinejf.free.fr) + * Copyright (C) 2008-2011 Jean-François Moine <moinejf@free.fr> * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com> * * This module is adapted from the ov51x-jpeg package, which itself @@ -61,10 +61,12 @@ static int i2c_detect_tries = 10; enum e_ctrl { BRIGHTNESS, CONTRAST, + EXPOSURE, COLORS, HFLIP, VFLIP, AUTOBRIGHT, + AUTOGAIN, FREQ, NCTRL /* number of controls */ }; @@ -118,6 +120,7 @@ struct sd { }; enum sensors { SEN_OV2610, + SEN_OV2610AE, SEN_OV3610, SEN_OV6620, SEN_OV6630, @@ -141,9 +144,11 @@ enum sensors { /* V4L2 controls supported by the driver */ static void setbrightness(struct gspca_dev *gspca_dev); static void setcontrast(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); static void setcolors(struct gspca_dev *gspca_dev); static void sethvflip(struct gspca_dev *gspca_dev); static void setautobright(struct gspca_dev *gspca_dev); +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static void setfreq(struct gspca_dev *gspca_dev); static void setfreq_i(struct sd *sd); @@ -172,6 +177,18 @@ static const struct ctrl sd_ctrls[] = { }, .set_control = setcontrast, }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 127, + }, + .set_control = setexposure, + }, [COLORS] = { { .id = V4L2_CID_SATURATION, @@ -221,6 +238,19 @@ static const struct ctrl sd_ctrls[] = { }, .set_control = setautobright, }, +[AUTOGAIN] = { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Gain", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .flags = V4L2_CTRL_FLAG_UPDATE + }, + .set = sd_setautogain, + }, [FREQ] = { { .id = V4L2_CID_POWER_LINE_FREQUENCY, @@ -237,48 +267,78 @@ static const struct ctrl sd_ctrls[] = { /* table of the disabled controls */ static const unsigned ctrl_dis[] = { -[SEN_OV2610] = (1 << NCTRL) - 1, /* no control */ +[SEN_OV2610] = ((1 << NCTRL) - 1) /* no control */ + ^ ((1 << EXPOSURE) /* but exposure */ + | (1 << AUTOGAIN)), /* and autogain */ + +[SEN_OV2610AE] = ((1 << NCTRL) - 1) /* no control */ + ^ ((1 << EXPOSURE) /* but exposure */ + | (1 << AUTOGAIN)), /* and autogain */ [SEN_OV3610] = (1 << NCTRL) - 1, /* no control */ [SEN_OV6620] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV6630] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV66308AF] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7610] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7620] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7620AE] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7640] = (1 << HFLIP) | (1 << VFLIP) | (1 << AUTOBRIGHT) | - (1 << CONTRAST), + (1 << CONTRAST) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7648] = (1 << HFLIP) | (1 << VFLIP) | (1 << AUTOBRIGHT) | - (1 << CONTRAST), + (1 << CONTRAST) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), -[SEN_OV7660] = (1 << AUTOBRIGHT), +[SEN_OV7660] = (1 << AUTOBRIGHT) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV7670] = (1 << COLORS) | - (1 << AUTOBRIGHT), + (1 << AUTOBRIGHT) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV76BE] = (1 << HFLIP) | - (1 << VFLIP), + (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN), [SEN_OV8610] = (1 << HFLIP) | (1 << VFLIP) | + (1 << EXPOSURE) | + (1 << AUTOGAIN) | (1 << FREQ), }; @@ -428,6 +488,11 @@ static const struct v4l2_pix_format ovfx2_cif_mode[] = { .priv = 0}, }; static const struct v4l2_pix_format ovfx2_ov2610_mode[] = { + {800, 600, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, {1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 1600, .sizeimage = 1600 * 1200, @@ -544,6 +609,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { * buffers, there are some pretty strict real time constraints for * isochronous transfer for larger frame sizes). */ +/*jfm: this value works well for 1600x1200, but not 800x600 - see isoc_init */ #define OVFX2_BULK_SIZE (13 * 4096) /* I2C registers */ @@ -656,6 +722,24 @@ static const struct ov_i2c_regvals norm_2610[] = { { 0x12, 0x80 }, /* reset */ }; +static const struct ov_i2c_regvals norm_2610ae[] = { + {0x12, 0x80}, /* reset */ + {0x13, 0xcd}, + {0x09, 0x01}, + {0x0d, 0x00}, + {0x11, 0x80}, + {0x12, 0x20}, /* 1600x1200 */ + {0x33, 0x0c}, + {0x35, 0x90}, + {0x36, 0x37}, +/* ms-win traces */ + {0x11, 0x83}, /* clock / 3 ? */ + {0x2d, 0x00}, /* 60 Hz filter */ + {0x24, 0xb0}, /* normal colors */ + {0x25, 0x90}, + {0x10, 0x43}, +}; + static const struct ov_i2c_regvals norm_3620b[] = { /* * From the datasheet: "Note that after writing to register COMH @@ -2621,6 +2705,9 @@ static void ov_hires_configure(struct sd *sd) if (high == 0x96 && low == 0x40) { PDEBUG(D_PROBE, "Sensor is an OV2610"); sd->sensor = SEN_OV2610; + } else if (high == 0x96 && low == 0x41) { + PDEBUG(D_PROBE, "Sensor is an OV2610AE"); + sd->sensor = SEN_OV2610AE; } else if (high == 0x36 && (low & 0x0f) == 0x00) { PDEBUG(D_PROBE, "Sensor is an OV3610"); sd->sensor = SEN_OV3610; @@ -3171,6 +3258,13 @@ static void ov519_set_fr(struct sd *sd) ov518_i2c_w(sd, OV7670_R11_CLKRC, clock); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + i2c_w_mask(sd, 0x13, sd->ctrls[AUTOGAIN].val ? 0x05 : 0x00, 0x05); +} + /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) @@ -3295,15 +3389,22 @@ static int sd_init(struct gspca_dev *gspca_dev) } break; case BRIDGE_OVFX2: - if (sd->sensor == SEN_OV2610) { + switch (sd->sensor) { + case SEN_OV2610: + case SEN_OV2610AE: cam->cam_mode = ovfx2_ov2610_mode; cam->nmodes = ARRAY_SIZE(ovfx2_ov2610_mode); - } else if (sd->sensor == SEN_OV3610) { + break; + case SEN_OV3610: cam->cam_mode = ovfx2_ov3610_mode; cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode); - } else if (sd->sif) { - cam->cam_mode = ov519_sif_mode; - cam->nmodes = ARRAY_SIZE(ov519_sif_mode); + break; + default: + if (sd->sif) { + cam->cam_mode = ov519_sif_mode; + cam->nmodes = ARRAY_SIZE(ov519_sif_mode); + } + break; } break; case BRIDGE_W9968CF: @@ -3325,6 +3426,12 @@ static int sd_init(struct gspca_dev *gspca_dev) /* Enable autogain, autoexpo, awb, bandfilter */ i2c_w_mask(sd, 0x13, 0x27, 0x27); break; + case SEN_OV2610AE: + write_i2c_regvals(sd, norm_2610ae, ARRAY_SIZE(norm_2610ae)); + + /* enable autoexpo */ + i2c_w_mask(sd, 0x13, 0x05, 0x05); + break; case SEN_OV3610: write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)); @@ -3397,6 +3504,22 @@ error: return -EINVAL; } +/* function called at start time before URB creation */ +static int sd_isoc_init(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->bridge) { + case BRIDGE_OVFX2: + if (gspca_dev->width == 1600) + gspca_dev->cam.bulk_size = OVFX2_BULK_SIZE; + else + gspca_dev->cam.bulk_size = 7 * 4096; + break; + } + return 0; +} + /* Set up the OV511/OV511+ with the given image parameters. * * Do not put any sensor-specific code in here (including I2C I/O functions) @@ -3827,6 +3950,25 @@ static void mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); return; + case SEN_OV2610AE: { + u8 v; + + /* frame rates: + * 10fps / 5 fps for 1600x1200 + * 40fps / 20fps for 800x600 + */ + v = 80; + if (qvga) { + if (sd->frame_rate < 25) + v = 0x81; + } else { + if (sd->frame_rate < 10) + v = 0x81; + } + i2c_w(sd, 0x11, v); + i2c_w(sd, 0x12, qvga ? 0x60 : 0x20); + return; + } case SEN_OV3610: if (qvga) { xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4); @@ -3975,6 +4117,7 @@ static void set_ov_sensor_window(struct sd *sd) /* mode setup is fully handled in mode_init_ov_sensor_regs for these */ switch (sd->sensor) { case SEN_OV2610: + case SEN_OV2610AE: case SEN_OV3610: case SEN_OV7670: mode_init_ov_sensor_regs(sd); @@ -4110,12 +4253,16 @@ static int sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); if (!(sd->gspca_dev.ctrl_dis & (1 << BRIGHTNESS))) setbrightness(gspca_dev); + if (!(sd->gspca_dev.ctrl_dis & (1 << EXPOSURE))) + setexposure(gspca_dev); if (!(sd->gspca_dev.ctrl_dis & (1 << COLORS))) setcolors(gspca_dev); if (!(sd->gspca_dev.ctrl_dis & ((1 << HFLIP) | (1 << VFLIP)))) sethvflip(gspca_dev); if (!(sd->gspca_dev.ctrl_dis & (1 << AUTOBRIGHT))) setautobright(gspca_dev); + if (!(sd->gspca_dev.ctrl_dis & (1 << AUTOGAIN))) + setautogain(gspca_dev); if (!(sd->gspca_dev.ctrl_dis & (1 << FREQ))) setfreq_i(sd); @@ -4529,6 +4676,14 @@ static void setcontrast(struct gspca_dev *gspca_dev) } } +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (!sd->ctrls[AUTOGAIN].val) + i2c_w(sd, 0x10, sd->ctrls[EXPOSURE].val); +} + static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -4587,6 +4742,22 @@ static void setautobright(struct gspca_dev *gspca_dev) i2c_w_mask(sd, 0x2d, sd->ctrls[AUTOBRIGHT].val ? 0x10 : 0x00, 0x10); } +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->ctrls[AUTOGAIN].val = val; + if (val) { + gspca_dev->ctrl_inac |= (1 << EXPOSURE); + } else { + gspca_dev->ctrl_inac &= ~(1 << EXPOSURE); + sd->ctrls[EXPOSURE].val = i2c_r(sd, 0x10); + } + if (gspca_dev->streaming) + setautogain(gspca_dev); + return gspca_dev->usb_err; +} + static void setfreq_i(struct sd *sd) { if (sd->sensor == SEN_OV7660 @@ -4731,6 +4902,7 @@ static const struct sd_desc sd_desc = { .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, .init = sd_init, + .isoc_init = sd_isoc_init, .start = sd_start, .stopN = sd_stopN, .stop0 = sd_stop0, diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index 04da22802736..0c6369b7fe18 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -1,5 +1,5 @@ /* - * ov534-ov772x gspca driver + * ov534-ov7xxx gspca driver * * Copyright (C) 2008 Antonio Ospite <ospite@studenti.unina.it> * Copyright (C) 2008 Jim Paris <jim@jtan.com> @@ -49,54 +49,59 @@ MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>"); MODULE_DESCRIPTION("GSPCA/OV534 USB Camera Driver"); MODULE_LICENSE("GPL"); +/* controls */ +enum e_ctrl { + BRIGHTNESS, + CONTRAST, + GAIN, + EXPOSURE, + AGC, + AWB, + AEC, + SHARPNESS, + HFLIP, + VFLIP, + COLORS, + LIGHTFREQ, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + + struct gspca_ctrl ctrls[NCTRLS]; + __u32 last_pts; u16 last_fid; u8 frame_rate; - u8 brightness; - u8 contrast; - u8 gain; - u8 exposure; - u8 agc; - u8 awb; - u8 aec; - s8 sharpness; - u8 hflip; - u8 vflip; - u8 freqfltr; + u8 sensor; +}; +enum sensors { + SENSOR_OV767x, + SENSOR_OV772x, + NSENSORS }; /* V4L2 controls supported by the driver */ -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightness(struct gspca_dev *gspca_dev); +static void setcontrast(struct gspca_dev *gspca_dev); +static void setgain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getagc(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setaec(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getaec(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setfreqfltr(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getfreqfltr(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_querymenu(struct gspca_dev *gspca_dev, - struct v4l2_querymenu *menu); +static void setawb(struct gspca_dev *gspca_dev); +static void setaec(struct gspca_dev *gspca_dev); +static void setsharpness(struct gspca_dev *gspca_dev); +static void sethvflip(struct gspca_dev *gspca_dev); +static void setcolors(struct gspca_dev *gspca_dev); +static void setlightfreq(struct gspca_dev *gspca_dev); + +static int sd_start(struct gspca_dev *gspca_dev); +static void sd_stopN(struct gspca_dev *gspca_dev); static const struct ctrl sd_ctrls[] = { - { /* 0 */ +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -104,13 +109,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define BRIGHTNESS_DEF 0 - .default_value = BRIGHTNESS_DEF, + .default_value = 0, }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = setbrightness }, - { /* 1 */ +[CONTRAST] = { { .id = V4L2_CID_CONTRAST, .type = V4L2_CTRL_TYPE_INTEGER, @@ -118,13 +121,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define CONTRAST_DEF 32 - .default_value = CONTRAST_DEF, + .default_value = 32, }, - .set = sd_setcontrast, - .get = sd_getcontrast, + .set_control = setcontrast }, - { /* 2 */ +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, @@ -132,13 +133,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 63, .step = 1, -#define GAIN_DEF 20 - .default_value = GAIN_DEF, + .default_value = 20, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = setgain }, - { /* 3 */ +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, @@ -146,13 +145,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define EXPO_DEF 120 - .default_value = EXPO_DEF, + .default_value = 120, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = setexposure }, - { /* 4 */ +[AGC] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -160,14 +157,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define AGC_DEF 1 - .default_value = AGC_DEF, + .default_value = 1, }, - .set = sd_setagc, - .get = sd_getagc, + .set = sd_setagc }, -#define AWB_IDX 5 - { /* 5 */ +[AWB] = { { .id = V4L2_CID_AUTO_WHITE_BALANCE, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -175,13 +169,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define AWB_DEF 1 - .default_value = AWB_DEF, + .default_value = 1, }, - .set = sd_setawb, - .get = sd_getawb, + .set_control = setawb }, - { /* 6 */ +[AEC] = { { .id = V4L2_CID_EXPOSURE_AUTO, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -189,13 +181,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define AEC_DEF 1 - .default_value = AEC_DEF, + .default_value = 1, }, - .set = sd_setaec, - .get = sd_getaec, + .set_control = setaec }, - { /* 7 */ +[SHARPNESS] = { { .id = V4L2_CID_SHARPNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -203,13 +193,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 63, .step = 1, -#define SHARPNESS_DEF 0 - .default_value = SHARPNESS_DEF, + .default_value = 0, }, - .set = sd_setsharpness, - .get = sd_getsharpness, + .set_control = setsharpness }, - { /* 8 */ +[HFLIP] = { { .id = V4L2_CID_HFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -217,13 +205,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define HFLIP_DEF 0 - .default_value = HFLIP_DEF, + .default_value = 0, }, - .set = sd_sethflip, - .get = sd_gethflip, + .set_control = sethvflip }, - { /* 9 */ +[VFLIP] = { { .id = V4L2_CID_VFLIP, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -231,13 +217,23 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define VFLIP_DEF 0 - .default_value = VFLIP_DEF, + .default_value = 0, }, - .set = sd_setvflip, - .get = sd_getvflip, + .set_control = sethvflip }, - { /* 10 */ +[COLORS] = { + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 6, + .step = 1, + .default_value = 3, + }, + .set_control = setcolors + }, +[LIGHTFREQ] = { { .id = V4L2_CID_POWER_LINE_FREQUENCY, .type = V4L2_CTRL_TYPE_MENU, @@ -245,11 +241,9 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, -#define FREQFLTR_DEF 0 - .default_value = FREQFLTR_DEF, + .default_value = 0, }, - .set = sd_setfreqfltr, - .get = sd_getfreqfltr, + .set_control = setlightfreq }, }; @@ -265,6 +259,16 @@ static const struct v4l2_pix_format ov772x_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; +static const struct v4l2_pix_format ov767x_mode[] = { + {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG}, + {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480 * 3 / 8 + 590, + .colorspace = V4L2_COLORSPACE_JPEG}, +}; static const u8 qvga_rates[] = {125, 100, 75, 60, 50, 40, 30}; static const u8 vga_rates[] = {60, 50, 40, 30, 15}; @@ -280,7 +284,288 @@ static const struct framerates ov772x_framerates[] = { }, }; -static const u8 bridge_init[][2] = { +struct reg_array { + const u8 (*val)[2]; + int len; +}; + +static const u8 bridge_init_767x[][2] = { +/* comments from the ms-win file apollo7670.set */ +/* str1 */ + {0xf1, 0x42}, + {0x88, 0xf8}, + {0x89, 0xff}, + {0x76, 0x03}, + {0x92, 0x03}, + {0x95, 0x10}, + {0xe2, 0x00}, + {0xe7, 0x3e}, + {0x8d, 0x1c}, + {0x8e, 0x00}, + {0x8f, 0x00}, + {0x1f, 0x00}, + {0xc3, 0xf9}, + {0x89, 0xff}, + {0x88, 0xf8}, + {0x76, 0x03}, + {0x92, 0x01}, + {0x93, 0x18}, + {0x1c, 0x00}, + {0x1d, 0x48}, + {0x1d, 0x00}, + {0x1d, 0xff}, + {0x1d, 0x02}, + {0x1d, 0x58}, + {0x1d, 0x00}, + {0x1c, 0x0a}, + {0x1d, 0x0a}, + {0x1d, 0x0e}, + {0xc0, 0x50}, /* HSize 640 */ + {0xc1, 0x3c}, /* VSize 480 */ + {0x34, 0x05}, /* enable Audio Suspend mode */ + {0xc2, 0x0c}, /* Input YUV */ + {0xc3, 0xf9}, /* enable PRE */ + {0x34, 0x05}, /* enable Audio Suspend mode */ + {0xe7, 0x2e}, /* this solves failure of "SuspendResumeTest" */ + {0x31, 0xf9}, /* enable 1.8V Suspend */ + {0x35, 0x02}, /* turn on JPEG */ + {0xd9, 0x10}, + {0x25, 0x42}, /* GPIO[8]:Input */ + {0x94, 0x11}, /* If the default setting is loaded when + * system boots up, this flag is closed here */ +}; +static const u8 sensor_init_767x[][2] = { + {0x12, 0x80}, + {0x11, 0x03}, + {0x3a, 0x04}, + {0x12, 0x00}, + {0x17, 0x13}, + {0x18, 0x01}, + {0x32, 0xb6}, + {0x19, 0x02}, + {0x1a, 0x7a}, + {0x03, 0x0a}, + {0x0c, 0x00}, + {0x3e, 0x00}, + {0x70, 0x3a}, + {0x71, 0x35}, + {0x72, 0x11}, + {0x73, 0xf0}, + {0xa2, 0x02}, + {0x7a, 0x2a}, /* set Gamma=1.6 below */ + {0x7b, 0x12}, + {0x7c, 0x1d}, + {0x7d, 0x2d}, + {0x7e, 0x45}, + {0x7f, 0x50}, + {0x80, 0x59}, + {0x81, 0x62}, + {0x82, 0x6b}, + {0x83, 0x73}, + {0x84, 0x7b}, + {0x85, 0x8a}, + {0x86, 0x98}, + {0x87, 0xb2}, + {0x88, 0xca}, + {0x89, 0xe0}, + {0x13, 0xe0}, + {0x00, 0x00}, + {0x10, 0x00}, + {0x0d, 0x40}, + {0x14, 0x38}, /* gain max 16x */ + {0xa5, 0x05}, + {0xab, 0x07}, + {0x24, 0x95}, + {0x25, 0x33}, + {0x26, 0xe3}, + {0x9f, 0x78}, + {0xa0, 0x68}, + {0xa1, 0x03}, + {0xa6, 0xd8}, + {0xa7, 0xd8}, + {0xa8, 0xf0}, + {0xa9, 0x90}, + {0xaa, 0x94}, + {0x13, 0xe5}, + {0x0e, 0x61}, + {0x0f, 0x4b}, + {0x16, 0x02}, + {0x21, 0x02}, + {0x22, 0x91}, + {0x29, 0x07}, + {0x33, 0x0b}, + {0x35, 0x0b}, + {0x37, 0x1d}, + {0x38, 0x71}, + {0x39, 0x2a}, + {0x3c, 0x78}, + {0x4d, 0x40}, + {0x4e, 0x20}, + {0x69, 0x00}, + {0x6b, 0x4a}, + {0x74, 0x10}, + {0x8d, 0x4f}, + {0x8e, 0x00}, + {0x8f, 0x00}, + {0x90, 0x00}, + {0x91, 0x00}, + {0x96, 0x00}, + {0x9a, 0x80}, + {0xb0, 0x84}, + {0xb1, 0x0c}, + {0xb2, 0x0e}, + {0xb3, 0x82}, + {0xb8, 0x0a}, + {0x43, 0x0a}, + {0x44, 0xf0}, + {0x45, 0x34}, + {0x46, 0x58}, + {0x47, 0x28}, + {0x48, 0x3a}, + {0x59, 0x88}, + {0x5a, 0x88}, + {0x5b, 0x44}, + {0x5c, 0x67}, + {0x5d, 0x49}, + {0x5e, 0x0e}, + {0x6c, 0x0a}, + {0x6d, 0x55}, + {0x6e, 0x11}, + {0x6f, 0x9f}, + {0x6a, 0x40}, + {0x01, 0x40}, + {0x02, 0x40}, + {0x13, 0xe7}, + {0x4f, 0x80}, + {0x50, 0x80}, + {0x51, 0x00}, + {0x52, 0x22}, + {0x53, 0x5e}, + {0x54, 0x80}, + {0x58, 0x9e}, + {0x41, 0x08}, + {0x3f, 0x00}, + {0x75, 0x04}, + {0x76, 0xe1}, + {0x4c, 0x00}, + {0x77, 0x01}, + {0x3d, 0xc2}, + {0x4b, 0x09}, + {0xc9, 0x60}, + {0x41, 0x38}, /* jfm: auto sharpness + auto de-noise */ + {0x56, 0x40}, + {0x34, 0x11}, + {0x3b, 0xc2}, + {0xa4, 0x8a}, /* Night mode trigger point */ + {0x96, 0x00}, + {0x97, 0x30}, + {0x98, 0x20}, + {0x99, 0x20}, + {0x9a, 0x84}, + {0x9b, 0x29}, + {0x9c, 0x03}, + {0x9d, 0x4c}, + {0x9e, 0x3f}, + {0x78, 0x04}, + {0x79, 0x01}, + {0xc8, 0xf0}, + {0x79, 0x0f}, + {0xc8, 0x00}, + {0x79, 0x10}, + {0xc8, 0x7e}, + {0x79, 0x0a}, + {0xc8, 0x80}, + {0x79, 0x0b}, + {0xc8, 0x01}, + {0x79, 0x0c}, + {0xc8, 0x0f}, + {0x79, 0x0d}, + {0xc8, 0x20}, + {0x79, 0x09}, + {0xc8, 0x80}, + {0x79, 0x02}, + {0xc8, 0xc0}, + {0x79, 0x03}, + {0xc8, 0x20}, + {0x79, 0x26}, +}; +static const u8 bridge_start_vga_767x[][2] = { +/* str59 JPG */ + {0x94, 0xaa}, + {0xf1, 0x42}, + {0xe5, 0x04}, + {0xc0, 0x50}, + {0xc1, 0x3c}, + {0xc2, 0x0c}, + {0x35, 0x02}, /* turn on JPEG */ + {0xd9, 0x10}, + {0xda, 0x00}, /* for higher clock rate(30fps) */ + {0x34, 0x05}, /* enable Audio Suspend mode */ + {0xc3, 0xf9}, /* enable PRE */ + {0x8c, 0x00}, /* CIF VSize LSB[2:0] */ + {0x8d, 0x1c}, /* output YUV */ +/* {0x34, 0x05}, * enable Audio Suspend mode (?) */ + {0x50, 0x00}, /* H/V divider=0 */ + {0x51, 0xa0}, /* input H=640/4 */ + {0x52, 0x3c}, /* input V=480/4 */ + {0x53, 0x00}, /* offset X=0 */ + {0x54, 0x00}, /* offset Y=0 */ + {0x55, 0x00}, /* H/V size[8]=0 */ + {0x57, 0x00}, /* H-size[9]=0 */ + {0x5c, 0x00}, /* output size[9:8]=0 */ + {0x5a, 0xa0}, /* output H=640/4 */ + {0x5b, 0x78}, /* output V=480/4 */ + {0x1c, 0x0a}, + {0x1d, 0x0a}, + {0x94, 0x11}, +}; +static const u8 sensor_start_vga_767x[][2] = { + {0x11, 0x01}, + {0x1e, 0x04}, + {0x19, 0x02}, + {0x1a, 0x7a}, +}; +static const u8 bridge_start_qvga_767x[][2] = { +/* str86 JPG */ + {0x94, 0xaa}, + {0xf1, 0x42}, + {0xe5, 0x04}, + {0xc0, 0x80}, + {0xc1, 0x60}, + {0xc2, 0x0c}, + {0x35, 0x02}, /* turn on JPEG */ + {0xd9, 0x10}, + {0xc0, 0x50}, /* CIF HSize 640 */ + {0xc1, 0x3c}, /* CIF VSize 480 */ + {0x8c, 0x00}, /* CIF VSize LSB[2:0] */ + {0x8d, 0x1c}, /* output YUV */ + {0x34, 0x05}, /* enable Audio Suspend mode */ + {0xc2, 0x4c}, /* output YUV and Enable DCW */ + {0xc3, 0xf9}, /* enable PRE */ + {0x1c, 0x00}, /* indirect addressing */ + {0x1d, 0x48}, /* output YUV422 */ + {0x50, 0x89}, /* H/V divider=/2; plus DCW AVG */ + {0x51, 0xa0}, /* DCW input H=640/4 */ + {0x52, 0x78}, /* DCW input V=480/4 */ + {0x53, 0x00}, /* offset X=0 */ + {0x54, 0x00}, /* offset Y=0 */ + {0x55, 0x00}, /* H/V size[8]=0 */ + {0x57, 0x00}, /* H-size[9]=0 */ + {0x5c, 0x00}, /* DCW output size[9:8]=0 */ + {0x5a, 0x50}, /* DCW output H=320/4 */ + {0x5b, 0x3c}, /* DCW output V=240/4 */ + {0x1c, 0x0a}, + {0x1d, 0x0a}, + {0x94, 0x11}, +}; +static const u8 sensor_start_qvga_767x[][2] = { + {0x11, 0x01}, + {0x1e, 0x04}, + {0x19, 0x02}, + {0x1a, 0x7a}, +}; + +static const u8 bridge_init_772x[][2] = { { 0xc2, 0x0c }, { 0x88, 0xf8 }, { 0xc3, 0x69 }, @@ -338,7 +623,7 @@ static const u8 bridge_init[][2] = { { 0xc1, 0x3c }, { 0xc2, 0x0c }, }; -static const u8 sensor_init[][2] = { +static const u8 sensor_init_772x[][2] = { { 0x12, 0x80 }, { 0x11, 0x01 }, /*fixme: better have a delay?*/ @@ -431,7 +716,7 @@ static const u8 sensor_init[][2] = { { 0x8e, 0x00 }, /* De-noise threshold */ { 0x0c, 0xd0 } }; -static const u8 bridge_start_vga[][2] = { +static const u8 bridge_start_vga_772x[][2] = { {0x1c, 0x00}, {0x1d, 0x40}, {0x1d, 0x02}, @@ -442,7 +727,7 @@ static const u8 bridge_start_vga[][2] = { {0xc0, 0x50}, {0xc1, 0x3c}, }; -static const u8 sensor_start_vga[][2] = { +static const u8 sensor_start_vga_772x[][2] = { {0x12, 0x00}, {0x17, 0x26}, {0x18, 0xa0}, @@ -452,7 +737,7 @@ static const u8 sensor_start_vga[][2] = { {0x2c, 0xf0}, {0x65, 0x20}, }; -static const u8 bridge_start_qvga[][2] = { +static const u8 bridge_start_qvga_772x[][2] = { {0x1c, 0x00}, {0x1d, 0x40}, {0x1d, 0x02}, @@ -463,7 +748,7 @@ static const u8 bridge_start_qvga[][2] = { {0xc0, 0x28}, {0xc1, 0x1e}, }; -static const u8 sensor_start_qvga[][2] = { +static const u8 sensor_start_qvga_772x[][2] = { {0x12, 0x40}, {0x17, 0x3f}, {0x18, 0x50}, @@ -646,6 +931,8 @@ static void set_frame_rate(struct gspca_dev *gspca_dev) {30, 0x04, 0x41, 0x04}, }; + if (sd->sensor != SENSOR_OV772x) + return; if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv == 0) { r = rate_0; i = ARRAY_SIZE(rate_0); @@ -669,15 +956,28 @@ static void set_frame_rate(struct gspca_dev *gspca_dev) static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + int val; - sccb_reg_write(gspca_dev, 0x9b, sd->brightness); + val = sd->ctrls[BRIGHTNESS].val; + if (sd->sensor == SENSOR_OV767x) { + if (val < 0) + val = 0x80 - val; + sccb_reg_write(gspca_dev, 0x55, val); /* bright */ + } else { + sccb_reg_write(gspca_dev, 0x9b, val); + } } static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 val; - sccb_reg_write(gspca_dev, 0x9c, sd->contrast); + val = sd->ctrls[CONTRAST].val; + if (sd->sensor == SENSOR_OV767x) + sccb_reg_write(gspca_dev, 0x56, val); /* contras */ + else + sccb_reg_write(gspca_dev, 0x9c, val); } static void setgain(struct gspca_dev *gspca_dev) @@ -685,10 +985,10 @@ static void setgain(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; u8 val; - if (sd->agc) + if (sd->ctrls[AGC].val) return; - val = sd->gain; + val = sd->ctrls[GAIN].val; switch (val & 0x30) { case 0x00: val &= 0x0f; @@ -715,25 +1015,32 @@ static void setexposure(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; u8 val; - if (sd->aec) + if (sd->ctrls[AEC].val) return; - /* 'val' is one byte and represents half of the exposure value we are - * going to set into registers, a two bytes value: - * - * MSB: ((u16) val << 1) >> 8 == val >> 7 - * LSB: ((u16) val << 1) & 0xff == val << 1 - */ - val = sd->exposure; - sccb_reg_write(gspca_dev, 0x08, val >> 7); - sccb_reg_write(gspca_dev, 0x10, val << 1); + val = sd->ctrls[EXPOSURE].val; + if (sd->sensor == SENSOR_OV767x) { + + /* set only aec[9:2] */ + sccb_reg_write(gspca_dev, 0x10, val); /* aech */ + } else { + + /* 'val' is one byte and represents half of the exposure value + * we are going to set into registers, a two bytes value: + * + * MSB: ((u16) val << 1) >> 8 == val >> 7 + * LSB: ((u16) val << 1) & 0xff == val << 1 + */ + sccb_reg_write(gspca_dev, 0x08, val >> 7); + sccb_reg_write(gspca_dev, 0x10, val << 1); + } } static void setagc(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->agc) { + if (sd->ctrls[AGC].val) { sccb_reg_write(gspca_dev, 0x13, sccb_reg_read(gspca_dev, 0x13) | 0x04); sccb_reg_write(gspca_dev, 0x64, @@ -752,15 +1059,17 @@ static void setawb(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->awb) { + if (sd->ctrls[AWB].val) { sccb_reg_write(gspca_dev, 0x13, sccb_reg_read(gspca_dev, 0x13) | 0x02); - sccb_reg_write(gspca_dev, 0x63, + if (sd->sensor == SENSOR_OV772x) + sccb_reg_write(gspca_dev, 0x63, sccb_reg_read(gspca_dev, 0x63) | 0xc0); } else { sccb_reg_write(gspca_dev, 0x13, sccb_reg_read(gspca_dev, 0x13) & ~0x02); - sccb_reg_write(gspca_dev, 0x63, + if (sd->sensor == SENSOR_OV772x) + sccb_reg_write(gspca_dev, 0x63, sccb_reg_read(gspca_dev, 0x63) & ~0xc0); } } @@ -768,14 +1077,22 @@ static void setawb(struct gspca_dev *gspca_dev) static void setaec(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 data; - if (sd->aec) + data = sd->sensor == SENSOR_OV767x ? + 0x05 : /* agc + aec */ + 0x01; /* agc */ + if (sd->ctrls[AEC].val) sccb_reg_write(gspca_dev, 0x13, - sccb_reg_read(gspca_dev, 0x13) | 0x01); + sccb_reg_read(gspca_dev, 0x13) | data); else { sccb_reg_write(gspca_dev, 0x13, - sccb_reg_read(gspca_dev, 0x13) & ~0x01); - setexposure(gspca_dev); + sccb_reg_read(gspca_dev, 0x13) & ~data); + if (sd->sensor == SENSOR_OV767x) + sd->ctrls[EXPOSURE].val = + sccb_reg_read(gspca_dev, 10); /* aech */ + else + setexposure(gspca_dev); } } @@ -784,43 +1101,67 @@ static void setsharpness(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; u8 val; - val = sd->sharpness; + val = sd->ctrls[SHARPNESS].val; sccb_reg_write(gspca_dev, 0x91, val); /* Auto de-noise threshold */ sccb_reg_write(gspca_dev, 0x8e, val); /* De-noise threshold */ } -static void sethflip(struct gspca_dev *gspca_dev) +static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 val; - if (sd->hflip == 0) - sccb_reg_write(gspca_dev, 0x0c, - sccb_reg_read(gspca_dev, 0x0c) | 0x40); - else - sccb_reg_write(gspca_dev, 0x0c, - sccb_reg_read(gspca_dev, 0x0c) & ~0x40); + if (sd->sensor == SENSOR_OV767x) { + val = sccb_reg_read(gspca_dev, 0x1e); /* mvfp */ + val &= ~0x30; + if (sd->ctrls[HFLIP].val) + val |= 0x20; + if (sd->ctrls[VFLIP].val) + val |= 0x10; + sccb_reg_write(gspca_dev, 0x1e, val); + } else { + val = sccb_reg_read(gspca_dev, 0x0c); + val &= ~0xc0; + if (sd->ctrls[HFLIP].val == 0) + val |= 0x40; + if (sd->ctrls[VFLIP].val == 0) + val |= 0x80; + sccb_reg_write(gspca_dev, 0x0c, val); + } } -static void setvflip(struct gspca_dev *gspca_dev) +static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 val; + int i; + static u8 color_tb[][6] = { + {0x42, 0x42, 0x00, 0x11, 0x30, 0x41}, + {0x52, 0x52, 0x00, 0x16, 0x3c, 0x52}, + {0x66, 0x66, 0x00, 0x1b, 0x4b, 0x66}, + {0x80, 0x80, 0x00, 0x22, 0x5e, 0x80}, + {0x9a, 0x9a, 0x00, 0x29, 0x71, 0x9a}, + {0xb8, 0xb8, 0x00, 0x31, 0x87, 0xb8}, + {0xdd, 0xdd, 0x00, 0x3b, 0xa2, 0xdd}, + }; - if (sd->vflip == 0) - sccb_reg_write(gspca_dev, 0x0c, - sccb_reg_read(gspca_dev, 0x0c) | 0x80); - else - sccb_reg_write(gspca_dev, 0x0c, - sccb_reg_read(gspca_dev, 0x0c) & ~0x80); + val = sd->ctrls[COLORS].val; + for (i = 0; i < ARRAY_SIZE(color_tb[0]); i++) + sccb_reg_write(gspca_dev, 0x4f + i, color_tb[val][i]); } -static void setfreqfltr(struct gspca_dev *gspca_dev) +static void setlightfreq(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + u8 val; - if (sd->freqfltr == 0) - sccb_reg_write(gspca_dev, 0x2b, 0x00); - else - sccb_reg_write(gspca_dev, 0x2b, 0x9e); + val = sd->ctrls[LIGHTFREQ].val ? 0x9e : 0x00; + if (sd->sensor == SENSOR_OV767x) { + sccb_reg_write(gspca_dev, 0x2a, 0x00); + if (val) + val = 0x9d; /* insert dummy to 25fps for 50Hz */ + } + sccb_reg_write(gspca_dev, 0x2b, val); } @@ -833,39 +1174,33 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; + cam->ctrls = sd->ctrls; + + /* the auto white balance control works only when auto gain is set */ + if (sd_ctrls[AGC].qctrl.default_value == 0) + gspca_dev->ctrl_inac |= (1 << AWB); + cam->cam_mode = ov772x_mode; cam->nmodes = ARRAY_SIZE(ov772x_mode); - cam->mode_framerates = ov772x_framerates; - - cam->bulk = 1; - cam->bulk_size = 16384; - cam->bulk_nurbs = 2; sd->frame_rate = 30; - sd->brightness = BRIGHTNESS_DEF; - sd->contrast = CONTRAST_DEF; - sd->gain = GAIN_DEF; - sd->exposure = EXPO_DEF; -#if AGC_DEF != 0 - sd->agc = AGC_DEF; -#else - gspca_dev->ctrl_inac |= (1 << AWB_IDX); -#endif - sd->awb = AWB_DEF; - sd->aec = AEC_DEF; - sd->sharpness = SHARPNESS_DEF; - sd->hflip = HFLIP_DEF; - sd->vflip = VFLIP_DEF; - sd->freqfltr = FREQFLTR_DEF; - return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; u16 sensor_id; + static const struct reg_array bridge_init[NSENSORS] = { + [SENSOR_OV767x] = {bridge_init_767x, ARRAY_SIZE(bridge_init_767x)}, + [SENSOR_OV772x] = {bridge_init_772x, ARRAY_SIZE(bridge_init_772x)}, + }; + static const struct reg_array sensor_init[NSENSORS] = { + [SENSOR_OV767x] = {sensor_init_767x, ARRAY_SIZE(sensor_init_767x)}, + [SENSOR_OV772x] = {sensor_init_772x, ARRAY_SIZE(sensor_init_772x)}, + }; /* reset bridge */ ov534_reg_write(gspca_dev, 0xe7, 0x3a); @@ -886,48 +1221,100 @@ static int sd_init(struct gspca_dev *gspca_dev) sensor_id |= sccb_reg_read(gspca_dev, 0x0b); PDEBUG(D_PROBE, "Sensor ID: %04x", sensor_id); + if ((sensor_id & 0xfff0) == 0x7670) { + sd->sensor = SENSOR_OV767x; + gspca_dev->ctrl_dis = (1 << GAIN) | + (1 << AGC) | + (1 << SHARPNESS); /* auto */ + sd->ctrls[BRIGHTNESS].min = -127; + sd->ctrls[BRIGHTNESS].max = 127; + sd->ctrls[BRIGHTNESS].def = 0; + sd->ctrls[CONTRAST].max = 0x80; + sd->ctrls[CONTRAST].def = 0x40; + sd->ctrls[EXPOSURE].min = 0x08; + sd->ctrls[EXPOSURE].max = 0x60; + sd->ctrls[EXPOSURE].def = 0x13; + sd->ctrls[SHARPNESS].max = 9; + sd->ctrls[SHARPNESS].def = 4; + sd->ctrls[HFLIP].def = 1; + gspca_dev->cam.cam_mode = ov767x_mode; + gspca_dev->cam.nmodes = ARRAY_SIZE(ov767x_mode); + } else { + sd->sensor = SENSOR_OV772x; + gspca_dev->ctrl_dis = (1 << COLORS); + gspca_dev->cam.bulk = 1; + gspca_dev->cam.bulk_size = 16384; + gspca_dev->cam.bulk_nurbs = 2; + gspca_dev->cam.mode_framerates = ov772x_framerates; + } + /* initialize */ - reg_w_array(gspca_dev, bridge_init, - ARRAY_SIZE(bridge_init)); + reg_w_array(gspca_dev, bridge_init[sd->sensor].val, + bridge_init[sd->sensor].len); ov534_set_led(gspca_dev, 1); - sccb_w_array(gspca_dev, sensor_init, - ARRAY_SIZE(sensor_init)); - ov534_reg_write(gspca_dev, 0xe0, 0x09); - ov534_set_led(gspca_dev, 0); - set_frame_rate(gspca_dev); + sccb_w_array(gspca_dev, sensor_init[sd->sensor].val, + sensor_init[sd->sensor].len); + if (sd->sensor == SENSOR_OV767x) + sd_start(gspca_dev); + sd_stopN(gspca_dev); +/* set_frame_rate(gspca_dev); */ return gspca_dev->usb_err; } static int sd_start(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; int mode; + static const struct reg_array bridge_start[NSENSORS][2] = { + [SENSOR_OV767x] = {{bridge_start_qvga_767x, + ARRAY_SIZE(bridge_start_qvga_767x)}, + {bridge_start_vga_767x, + ARRAY_SIZE(bridge_start_vga_767x)}}, + [SENSOR_OV772x] = {{bridge_start_qvga_772x, + ARRAY_SIZE(bridge_start_qvga_772x)}, + {bridge_start_vga_772x, + ARRAY_SIZE(bridge_start_vga_772x)}}, + }; + static const struct reg_array sensor_start[NSENSORS][2] = { + [SENSOR_OV767x] = {{sensor_start_qvga_767x, + ARRAY_SIZE(sensor_start_qvga_767x)}, + {sensor_start_vga_767x, + ARRAY_SIZE(sensor_start_vga_767x)}}, + [SENSOR_OV772x] = {{sensor_start_qvga_772x, + ARRAY_SIZE(sensor_start_qvga_772x)}, + {sensor_start_vga_772x, + ARRAY_SIZE(sensor_start_vga_772x)}}, + }; + + /* (from ms-win trace) */ + if (sd->sensor == SENSOR_OV767x) + sccb_reg_write(gspca_dev, 0x1e, 0x04); + /* black sun enable ? */ + + mode = gspca_dev->curr_mode; /* 0: 320x240, 1: 640x480 */ + reg_w_array(gspca_dev, bridge_start[sd->sensor][mode].val, + bridge_start[sd->sensor][mode].len); + sccb_w_array(gspca_dev, sensor_start[sd->sensor][mode].val, + sensor_start[sd->sensor][mode].len); - mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; - if (mode != 0) { /* 320x240 */ - reg_w_array(gspca_dev, bridge_start_qvga, - ARRAY_SIZE(bridge_start_qvga)); - sccb_w_array(gspca_dev, sensor_start_qvga, - ARRAY_SIZE(sensor_start_qvga)); - } else { /* 640x480 */ - reg_w_array(gspca_dev, bridge_start_vga, - ARRAY_SIZE(bridge_start_vga)); - sccb_w_array(gspca_dev, sensor_start_vga, - ARRAY_SIZE(sensor_start_vga)); - } set_frame_rate(gspca_dev); - setagc(gspca_dev); + if (!(gspca_dev->ctrl_dis & (1 << AGC))) + setagc(gspca_dev); setawb(gspca_dev); setaec(gspca_dev); - setgain(gspca_dev); + if (!(gspca_dev->ctrl_dis & (1 << GAIN))) + setgain(gspca_dev); setexposure(gspca_dev); setbrightness(gspca_dev); setcontrast(gspca_dev); - setsharpness(gspca_dev); - setvflip(gspca_dev); - sethflip(gspca_dev); - setfreqfltr(gspca_dev); + if (!(gspca_dev->ctrl_dis & (1 << SHARPNESS))) + setsharpness(gspca_dev); + sethvflip(gspca_dev); + if (!(gspca_dev->ctrl_dis & (1 << COLORS))) + setcolors(gspca_dev); + setlightfreq(gspca_dev); ov534_set_led(gspca_dev, 1); ov534_reg_write(gspca_dev, 0xe0, 0x00); @@ -957,9 +1344,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u32 this_pts; u16 this_fid; int remaining_len = len; + int payload_len; + payload_len = gspca_dev->cam.bulk ? 2048 : 2040; do { - len = min(remaining_len, 2048); + len = min(remaining_len, payload_len); /* Payloads are prefixed with a UVC-style header. We consider a frame to start when the FID toggles, or the PTS @@ -999,8 +1388,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* If this packet is marked as EOF, end the frame */ } else if (data[1] & UVC_STREAM_EOF) { sd->last_pts = 0; - if (gspca_dev->image_len + len - 12 != - gspca_dev->width * gspca_dev->height * 2) { + if (gspca_dev->pixfmt == V4L2_PIX_FMT_YUYV + && gspca_dev->image_len + len - 12 != + gspca_dev->width * gspca_dev->height * 2) { PDEBUG(D_PACK, "wrong sized frame"); goto discard; } @@ -1026,212 +1416,27 @@ scan_next: } while (remaining_len > 0); } -/* controls */ -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - setgain(gspca_dev); - return 0; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->gain; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - setexposure(gspca_dev); - return 0; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->exposure; - return 0; -} - -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - setbrightness(gspca_dev); - return 0; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->brightness; - return 0; -} - -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->contrast = val; - if (gspca_dev->streaming) - setcontrast(gspca_dev); - return 0; -} - -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->contrast; - return 0; -} - static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->agc = val; - - if (gspca_dev->streaming) { + sd->ctrls[AGC].val = val; - /* the auto white balance control works only - * when auto gain is set */ - if (val) - gspca_dev->ctrl_inac &= ~(1 << AWB_IDX); - else - gspca_dev->ctrl_inac |= (1 << AWB_IDX); - setagc(gspca_dev); + /* the auto white balance control works only + * when auto gain is set */ + if (val) { + gspca_dev->ctrl_inac &= ~(1 << AWB); + } else { + gspca_dev->ctrl_inac |= (1 << AWB); + if (sd->ctrls[AWB].val) { + sd->ctrls[AWB].val = 0; + if (gspca_dev->streaming) + setawb(gspca_dev); + } } - return 0; -} - -static int sd_getagc(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->agc; - return 0; -} - -static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->awb = val; - if (gspca_dev->streaming) - setawb(gspca_dev); - return 0; -} - -static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->awb; - return 0; -} - -static int sd_setaec(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->aec = val; - if (gspca_dev->streaming) - setaec(gspca_dev); - return 0; -} - -static int sd_getaec(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->aec; - return 0; -} - -static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->sharpness = val; - if (gspca_dev->streaming) - setsharpness(gspca_dev); - return 0; -} - -static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->sharpness; - return 0; -} - -static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->hflip = val; - if (gspca_dev->streaming) - sethflip(gspca_dev); - return 0; -} - -static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->hflip; - return 0; -} - -static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->vflip = val; - if (gspca_dev->streaming) - setvflip(gspca_dev); - return 0; -} - -static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->vflip; - return 0; -} - -static int sd_setfreqfltr(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->freqfltr = val; if (gspca_dev->streaming) - setfreqfltr(gspca_dev); - return 0; -} - -static int sd_getfreqfltr(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->freqfltr; - return 0; + setagc(gspca_dev); + return gspca_dev->usb_err; } static int sd_querymenu(struct gspca_dev *gspca_dev, @@ -1302,6 +1507,7 @@ static const struct sd_desc sd_desc = { /* -- module initialisation -- */ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x1415, 0x2000)}, + {USB_DEVICE(0x06f8, 0x3002)}, {} }; diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index fcf29897b713..c431900cd292 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -152,6 +152,13 @@ static const struct dmi_system_id flip_dmi_table[] = { } }, { + .ident = "MSI MS-1633X", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "MS-1633X") + } + }, + { .ident = "MSI MS-1635X", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), @@ -369,7 +376,7 @@ static const struct v4l2_pix_format vga_mode[] = { .priv = SCALE_160x120}, {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 590, + .sizeimage = 320 * 240 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = SCALE_320x240 | MODE_JPEG}, {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, @@ -384,7 +391,7 @@ static const struct v4l2_pix_format vga_mode[] = { .priv = SCALE_320x240}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + .sizeimage = 640 * 480 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = SCALE_640x480 | MODE_JPEG}, {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, @@ -417,7 +424,7 @@ static const struct v4l2_pix_format sxga_mode[] = { .priv = SCALE_160x120}, {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 590, + .sizeimage = 320 * 240 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = SCALE_320x240 | MODE_JPEG}, {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, @@ -432,7 +439,7 @@ static const struct v4l2_pix_format sxga_mode[] = { .priv = SCALE_320x240}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + .sizeimage = 640 * 480 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = SCALE_640x480 | MODE_JPEG}, {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, @@ -884,6 +891,9 @@ static struct i2c_reg_u8 ov7660_init[] = { {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3}, {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40}, {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a}, + /* HDG Set hstart and hstop, datasheet default 0x11, 0x61, using + 0x10, 0x61 and sd->hstart, vstart = 3, fixes ugly colored borders */ + {0x17, 0x10}, {0x18, 0x61}, {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43}, {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6}, {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50}, @@ -1332,10 +1342,8 @@ static int ov7660_init_sensor(struct gspca_dev *gspca_dev) return -ENODEV; } } - /* disable hflip and vflip */ - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX); - sd->hstart = 1; - sd->vstart = 1; + sd->hstart = 3; + sd->vstart = 3; return 0; } @@ -1608,6 +1616,18 @@ static int set_hvflip(struct gspca_dev *gspca_dev) } switch (sd->sensor) { + case SENSOR_OV7660: + value = 0x01; + if (hflip) + value |= 0x20; + if (vflip) { + value |= 0x10; + sd->vstart = 2; + } else + sd->vstart = 3; + reg_w1(gspca_dev, 0x1182, sd->vstart); + i2c_w1(gspca_dev, 0x1e, value); + break; case SENSOR_OV9650: i2c_r1(gspca_dev, 0x1e, &value); value &= ~0x30; @@ -2482,7 +2502,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)}, {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)}, - {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, FLIP_DETECT)}, {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)}, {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)}, @@ -2494,7 +2514,7 @@ static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)}, {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)}, {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)}, - {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)}, + {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, LED_REVERSE)}, {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)}, {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)}, {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)}, diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index c6cd68d66b53..5a08738fba30 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1,9 +1,9 @@ /* * sonix sn9c102 (bayer) library - * Copyright (C) 2003 2004 Michel Xhaard mxhaard@magic.fr - * Add Pas106 Stefano Mozzi (C) 2004 * - * V4L2 by Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2009-2011 Jean-François Moine <http://moinejf.free.fr> + * Copyright (C) 2003 2004 Michel Xhaard mxhaard@magic.fr + * Add Pas106 Stefano Mozzi (C) 2004 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -52,13 +52,26 @@ all: #include <linux/input.h> #include "gspca.h" -MODULE_AUTHOR("Michel Xhaard <mxhaard@users.sourceforge.net>"); +MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("GSPCA/SN9C102 USB Camera Driver"); MODULE_LICENSE("GPL"); +/* controls */ +enum e_ctrl { + BRIGHTNESS, + GAIN, + EXPOSURE, + AUTOGAIN, + FREQ, + NCTRLS /* number of controls */ +}; + /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ + + struct gspca_ctrl ctrls[NCTRLS]; + atomic_t avg_lum; int prev_avg_lum; int exp_too_low_cnt; @@ -66,13 +79,8 @@ struct sd { int header_read; u8 header[12]; /* Header without sof marker */ - unsigned short exposure; - unsigned char gain; - unsigned char brightness; - unsigned char autogain; unsigned char autogain_ignore_frames; unsigned char frames_to_drop; - unsigned char freq; /* light freq filter setting */ __u8 bridge; /* Type of bridge */ #define BRIDGE_101 0 @@ -113,10 +121,9 @@ struct sensor_data { #define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */ /* ctrl_dis helper macros */ -#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << COARSE_EXPOSURE_IDX) | \ - (1 << AUTOGAIN_IDX)) -#define NO_FREQ (1 << FREQ_IDX) -#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) +#define NO_EXPO ((1 << EXPOSURE) | (1 << AUTOGAIN)) +#define NO_FREQ (1 << FREQ) +#define NO_BRIGHTNESS (1 << BRIGHTNESS) #define COMP 0xc7 /* 0x87 //0x07 */ #define COMP1 0xc9 /* 0x89 //0x09 */ @@ -141,20 +148,14 @@ struct sensor_data { #define AUTOGAIN_IGNORE_FRAMES 1 /* V4L2 controls supported by the driver */ -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); +static void setbrightness(struct gspca_dev *gspca_dev); +static void setgain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); +static void setfreq(struct gspca_dev *gspca_dev); -static const struct ctrl sd_ctrls[] = { -#define BRIGHTNESS_IDX 0 - { +static const struct ctrl sd_ctrls[NCTRLS] = { +[BRIGHTNESS] = { { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, @@ -162,14 +163,11 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define BRIGHTNESS_DEF 127 - .default_value = BRIGHTNESS_DEF, + .default_value = 127, }, - .set = sd_setbrightness, - .get = sd_getbrightness, + .set_control = setbrightness }, -#define GAIN_IDX 1 - { +[GAIN] = { { .id = V4L2_CID_GAIN, .type = V4L2_CTRL_TYPE_INTEGER, @@ -177,48 +175,31 @@ static const struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, -#define GAIN_DEF 127 #define GAIN_KNEE 230 - .default_value = GAIN_DEF, + .default_value = 127, }, - .set = sd_setgain, - .get = sd_getgain, + .set_control = setgain }, -#define EXPOSURE_IDX 2 - { +[EXPOSURE] = { { .id = V4L2_CID_EXPOSURE, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Exposure", -#define EXPOSURE_DEF 66 /* 33 ms / 30 fps (except on PASXXX) */ -#define EXPOSURE_KNEE 200 /* 100 ms / 10 fps (except on PASXXX) */ .minimum = 0, .maximum = 1023, .step = 1, - .default_value = EXPOSURE_DEF, + .default_value = 66, + /* 33 ms / 30 fps (except on PASXXX) */ +#define EXPOSURE_KNEE 200 /* 100 ms / 10 fps (except on PASXXX) */ .flags = 0, }, - .set = sd_setexposure, - .get = sd_getexposure, + .set_control = setexposure }, -#define COARSE_EXPOSURE_IDX 3 - { - { - .id = V4L2_CID_EXPOSURE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Exposure", +/* for coarse exposure */ +#define COARSE_EXPOSURE_MIN 2 +#define COARSE_EXPOSURE_MAX 15 #define COARSE_EXPOSURE_DEF 2 /* 30 fps */ - .minimum = 2, - .maximum = 15, - .step = 1, - .default_value = COARSE_EXPOSURE_DEF, - .flags = 0, - }, - .set = sd_setexposure, - .get = sd_getexposure, - }, -#define AUTOGAIN_IDX 4 - { +[AUTOGAIN] = { { .id = V4L2_CID_AUTOGAIN, .type = V4L2_CTRL_TYPE_BOOLEAN, @@ -228,13 +209,11 @@ static const struct ctrl sd_ctrls[] = { .step = 1, #define AUTOGAIN_DEF 1 .default_value = AUTOGAIN_DEF, - .flags = 0, + .flags = V4L2_CTRL_FLAG_UPDATE }, .set = sd_setautogain, - .get = sd_getautogain, }, -#define FREQ_IDX 5 - { +[FREQ] = { { .id = V4L2_CID_POWER_LINE_FREQUENCY, .type = V4L2_CTRL_TYPE_MENU, @@ -245,8 +224,7 @@ static const struct ctrl sd_ctrls[] = { #define FREQ_DEF 0 .default_value = FREQ_DEF, }, - .set = sd_setfreq, - .get = sd_getfreq, + .set_control = setfreq }, }; @@ -553,7 +531,7 @@ static const __u8 tas5130_sensor_init[][8] = { {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, }; -static struct sensor_data sensor_data[] = { +static const struct sensor_data sensor_data[] = { SENS(initHv7131d, hv7131d_sensor_init, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initHv7131r, hv7131r_sensor_init, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), SENS(initOv6650, ov6650_sensor_init, F_GAIN|F_SIF, 0, 0x60), @@ -646,7 +624,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) /* change reg 0x06 */ i2cOV[1] = sensor_data[sd->sensor].sensor_addr; - i2cOV[3] = sd->brightness; + i2cOV[3] = sd->ctrls[BRIGHTNESS].val; if (i2c_w(gspca_dev, i2cOV) < 0) goto err; break; @@ -664,13 +642,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) i2cpdoit[2] = 0x13; } - if (sd->brightness < 127) { + if (sd->ctrls[BRIGHTNESS].val < 127) { /* change reg 0x0b, signreg */ i2cpbright[3] = 0x01; /* set reg 0x0c, offset */ - i2cpbright[4] = 127 - sd->brightness; + i2cpbright[4] = 127 - sd->ctrls[BRIGHTNESS].val; } else - i2cpbright[4] = sd->brightness - 127; + i2cpbright[4] = sd->ctrls[BRIGHTNESS].val - 127; if (i2c_w(gspca_dev, i2cpbright) < 0) goto err; @@ -687,16 +665,16 @@ err: static void setsensorgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - unsigned char gain = sd->gain; + u8 gain = sd->ctrls[GAIN].val; switch (sd->sensor) { case SENSOR_HV7131D: { __u8 i2c[] = {0xc0, 0x11, 0x31, 0x00, 0x00, 0x00, 0x00, 0x17}; - i2c[3] = 0x3f - (sd->gain / 4); - i2c[4] = 0x3f - (sd->gain / 4); - i2c[5] = 0x3f - (sd->gain / 4); + i2c[3] = 0x3f - (gain / 4); + i2c[4] = 0x3f - (gain / 4); + i2c[5] = 0x3f - (gain / 4); if (i2c_w(gspca_dev, i2c) < 0) goto err; @@ -759,11 +737,11 @@ static void setsensorgain(struct gspca_dev *gspca_dev) i2cpdoit[2] = 0x13; } - i2cpgain[3] = sd->gain >> 3; - i2cpcolorgain[3] = sd->gain >> 4; - i2cpcolorgain[4] = sd->gain >> 4; - i2cpcolorgain[5] = sd->gain >> 4; - i2cpcolorgain[6] = sd->gain >> 4; + i2cpgain[3] = gain >> 3; + i2cpcolorgain[3] = gain >> 4; + i2cpcolorgain[4] = gain >> 4; + i2cpcolorgain[5] = gain >> 4; + i2cpcolorgain[6] = gain >> 4; if (i2c_w(gspca_dev, i2cpgain) < 0) goto err; @@ -792,13 +770,13 @@ static void setgain(struct gspca_dev *gspca_dev) } if (sd->bridge == BRIDGE_103) { - gain = sd->gain >> 1; + gain = sd->ctrls[GAIN].val >> 1; buf[0] = gain; /* Red */ buf[1] = gain; /* Green */ buf[2] = gain; /* Blue */ reg_w(gspca_dev, 0x05, buf, 3); } else { - gain = sd->gain >> 4; + gain = sd->ctrls[GAIN].val >> 4; buf[0] = gain << 4 | gain; /* Red and blue */ buf[1] = gain; /* Green */ reg_w(gspca_dev, 0x10, buf, 2); @@ -820,7 +798,8 @@ static void setexposure(struct gspca_dev *gspca_dev) where the framerate starts dropping 2) At 6138 the framerate has already dropped to 2 fps, going any lower makes little sense */ - __u16 reg = sd->exposure * 6; + u16 reg = sd->ctrls[EXPOSURE].val * 6; + i2c[3] = reg >> 8; i2c[4] = reg & 0xff; if (i2c_w(gspca_dev, i2c) != 0) @@ -832,7 +811,8 @@ static void setexposure(struct gspca_dev *gspca_dev) /* register 19's high nibble contains the sn9c10x clock divider The high nibble configures the no fps according to the formula: 60 / high_nibble. With a maximum of 30 fps */ - __u8 reg = sd->exposure; + u8 reg = sd->ctrls[EXPOSURE].val; + reg = (reg << 4) | 0x0b; reg_w(gspca_dev, 0x19, ®, 1); break; @@ -868,7 +848,7 @@ static void setexposure(struct gspca_dev *gspca_dev) } else reg10_max = 0x41; - reg11 = (15 * sd->exposure + 999) / 1000; + reg11 = (15 * sd->ctrls[EXPOSURE].val + 999) / 1000; if (reg11 < 1) reg11 = 1; else if (reg11 > 16) @@ -881,14 +861,16 @@ static void setexposure(struct gspca_dev *gspca_dev) reg11 = 4; /* frame exposure time in ms = 1000 * reg11 / 30 -> - reg10 = (sd->exposure / 2) * reg10_max / (1000 * reg11 / 30) */ - reg10 = (sd->exposure * 15 * reg10_max) / (1000 * reg11); + reg10 = (sd->ctrls[EXPOSURE].val / 2) * reg10_max + / (1000 * reg11 / 30) */ + reg10 = (sd->ctrls[EXPOSURE].val * 15 * reg10_max) + / (1000 * reg11); /* Don't allow this to get below 10 when using autogain, the steps become very large (relatively) when below 10 causing the image to oscilate from much too dark, to much too bright and back again. */ - if (sd->autogain && reg10 < 10) + if (sd->ctrls[AUTOGAIN].val && reg10 < 10) reg10 = 10; else if (reg10 > reg10_max) reg10 = reg10_max; @@ -927,15 +909,16 @@ static void setexposure(struct gspca_dev *gspca_dev) frame exposure times (like we are doing with the ov chips), as that sometimes leads to jumps in the exposure control, which are bad for auto exposure. */ - if (sd->exposure < 200) { - i2cpexpo[3] = 255 - (sd->exposure * 255) / 200; + if (sd->ctrls[EXPOSURE].val < 200) { + i2cpexpo[3] = 255 - (sd->ctrls[EXPOSURE].val * 255) + / 200; framerate_ctrl = 500; } else { /* The PAS202's exposure control goes from 0 - 4095, but anything below 500 causes vsync issues, so scale our 200-1023 to 500-4095 */ - framerate_ctrl = (sd->exposure - 200) * 1000 / 229 + - 500; + framerate_ctrl = (sd->ctrls[EXPOSURE].val - 200) + * 1000 / 229 + 500; } i2cpframerate[3] = framerate_ctrl >> 6; @@ -959,15 +942,15 @@ static void setexposure(struct gspca_dev *gspca_dev) /* For values below 150 use partial frame exposure, above that use framerate ctrl */ - if (sd->exposure < 150) { - i2cpexpo[3] = 150 - sd->exposure; + if (sd->ctrls[EXPOSURE].val < 150) { + i2cpexpo[3] = 150 - sd->ctrls[EXPOSURE].val; framerate_ctrl = 300; } else { /* The PAS106's exposure control goes from 0 - 4095, but anything below 300 causes vsync issues, so scale our 150-1023 to 300-4095 */ - framerate_ctrl = (sd->exposure - 150) * 1000 / 230 + - 300; + framerate_ctrl = (sd->ctrls[EXPOSURE].val - 150) + * 1000 / 230 + 300; } i2cpframerate[3] = framerate_ctrl >> 4; @@ -998,7 +981,7 @@ static void setfreq(struct gspca_dev *gspca_dev) 0x2b register, see ov6630 datasheet. 0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */ __u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}; - switch (sd->freq) { + switch (sd->ctrls[FREQ].val) { default: /* case 0: * no filter*/ /* case 2: * 60 hz */ @@ -1017,7 +1000,7 @@ static void setfreq(struct gspca_dev *gspca_dev) } } -#include "coarse_expo_autogain.h" +#include "autogain_functions.h" static void do_autogain(struct gspca_dev *gspca_dev) { @@ -1025,7 +1008,8 @@ static void do_autogain(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int avg_lum = atomic_read(&sd->avg_lum); - if (avg_lum == -1 || !sd->autogain) + if ((gspca_dev->ctrl_dis & (1 << AUTOGAIN)) || + avg_lum == -1 || !sd->ctrls[AUTOGAIN].val) return; if (sd->autogain_ignore_frames > 0) { @@ -1045,17 +1029,20 @@ static void do_autogain(struct gspca_dev *gspca_dev) } if (sensor_data[sd->sensor].flags & F_COARSE_EXPO) - result = gspca_coarse_grained_expo_autogain(gspca_dev, avg_lum, - sd->brightness * desired_avg_lum / 127, + result = coarse_grained_expo_autogain(gspca_dev, avg_lum, + sd->ctrls[BRIGHTNESS].val + * desired_avg_lum / 127, deadzone); else - result = gspca_auto_gain_n_exposure(gspca_dev, avg_lum, - sd->brightness * desired_avg_lum / 127, + result = auto_gain_n_exposure(gspca_dev, avg_lum, + sd->ctrls[BRIGHTNESS].val + * desired_avg_lum / 127, deadzone, GAIN_KNEE, EXPOSURE_KNEE); if (result) { PDEBUG(D_FRAM, "autogain: gain changed: gain: %d expo: %d", - (int)sd->gain, (int)sd->exposure); + (int) sd->ctrls[GAIN].val, + (int) sd->ctrls[EXPOSURE].val); sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; } } @@ -1074,9 +1061,15 @@ static int sd_config(struct gspca_dev *gspca_dev, /* copy the webcam info from the device id */ sd->sensor = id->driver_info >> 8; sd->bridge = id->driver_info & 0xff; + gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis; +#if AUTOGAIN_DEF + if (!(gspca_dev->ctrl_dis & (1 << AUTOGAIN))) + gspca_dev->ctrl_inac = (1 << GAIN) | (1 << EXPOSURE); +#endif cam = &gspca_dev->cam; + cam->ctrls = sd->ctrls; if (!(sensor_data[sd->sensor].flags & F_SIF)) { cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); @@ -1086,20 +1079,11 @@ static int sd_config(struct gspca_dev *gspca_dev, } cam->npkt = 36; /* 36 packets per ISOC message */ - sd->brightness = BRIGHTNESS_DEF; - sd->gain = GAIN_DEF; if (sensor_data[sd->sensor].flags & F_COARSE_EXPO) { - sd->exposure = COARSE_EXPOSURE_DEF; - gspca_dev->ctrl_dis |= (1 << EXPOSURE_IDX); - } else { - sd->exposure = EXPOSURE_DEF; - gspca_dev->ctrl_dis |= (1 << COARSE_EXPOSURE_IDX); + sd->ctrls[EXPOSURE].min = COARSE_EXPOSURE_MIN; + sd->ctrls[EXPOSURE].max = COARSE_EXPOSURE_MAX; + sd->ctrls[EXPOSURE].def = COARSE_EXPOSURE_DEF; } - if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX)) - sd->autogain = 0; /* Disable do_autogain callback */ - else - sd->autogain = AUTOGAIN_DEF; - sd->freq = FREQ_DEF; return 0; } @@ -1398,65 +1382,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } } -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->brightness = val; - if (gspca_dev->streaming) - setbrightness(gspca_dev); - return 0; -} - -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->brightness; - return 0; -} - -static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->gain = val; - if (gspca_dev->streaming) - setgain(gspca_dev); - return 0; -} - -static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->gain; - return 0; -} - -static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->exposure = val; - if (gspca_dev->streaming) - setexposure(gspca_dev); - return 0; -} - -static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->exposure; - return 0; -} - static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; - sd->autogain = val; + sd->ctrls[AUTOGAIN].val = val; sd->exp_too_high_cnt = 0; sd->exp_too_low_cnt = 0; @@ -1464,9 +1394,10 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) we are on a valid point of the autogain gain / exposure knee graph, and give this change time to take effect before doing autogain. */ - if (sd->autogain && !(sensor_data[sd->sensor].flags & F_COARSE_EXPO)) { - sd->exposure = EXPOSURE_DEF; - sd->gain = GAIN_DEF; + if (sd->ctrls[AUTOGAIN].val + && !(sensor_data[sd->sensor].flags & F_COARSE_EXPO)) { + sd->ctrls[EXPOSURE].val = sd->ctrls[EXPOSURE].def; + sd->ctrls[GAIN].val = sd->ctrls[GAIN].def; if (gspca_dev->streaming) { sd->autogain_ignore_frames = AUTOGAIN_IGNORE_FRAMES; setexposure(gspca_dev); @@ -1474,32 +1405,11 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) } } - return 0; -} - -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - *val = sd->autogain; - return 0; -} - -static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) -{ - struct sd *sd = (struct sd *) gspca_dev; - - sd->freq = val; - if (gspca_dev->streaming) - setfreq(gspca_dev); - return 0; -} - -static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) -{ - struct sd *sd = (struct sd *) gspca_dev; + if (sd->ctrls[AUTOGAIN].val) + gspca_dev->ctrl_inac = (1 << GAIN) | (1 << EXPOSURE); + else + gspca_dev->ctrl_inac = 0; - *val = sd->freq; return 0; } diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index d6f39ce1b7e1..6415aff5cbd1 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -29,8 +29,6 @@ MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("GSPCA/SONIX JPEG USB Camera Driver"); MODULE_LICENSE("GPL"); -static int starcam; - /* controls */ enum e_ctrl { BRIGHTNESS, @@ -57,11 +55,18 @@ struct sd { atomic_t avg_lum; u32 exposure; + struct work_struct work; + struct workqueue_struct *work_thread; + + u32 pktsz; /* (used by pkt_scan) */ + u16 npkt; + u8 nchg; + s8 short_mark; + u8 quality; /* image quality */ -#define QUALITY_MIN 60 -#define QUALITY_MAX 95 -#define QUALITY_DEF 80 - u8 jpegqual; /* webcam quality */ +#define QUALITY_MIN 25 +#define QUALITY_MAX 90 +#define QUALITY_DEF 70 u8 reg01; u8 reg17; @@ -99,6 +104,8 @@ enum sensors { SENSOR_SP80708, }; +static void qual_upd(struct work_struct *work); + /* device flags */ #define F_PDN_INV 0x01 /* inverse pin S_PWR_DN / sn_xxx tables */ #define F_ILLUM 0x02 /* presence of illuminator */ @@ -401,7 +408,7 @@ static const u8 sn_hv7131[0x1c] = { static const u8 sn_mi0360[0x1c] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ - 0x00, 0x61, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20, + 0x00, 0x63, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20, /* reg8 reg9 rega regb regc regd rege regf */ 0x81, 0x5d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ @@ -847,18 +854,8 @@ static const u8 mt9v111_sensor_init[][8] = { {0xb1, 0x5c, 0x01, 0x00, 0x01, 0x00, 0x00, 0x10}, /* IFP select */ {0xb1, 0x5c, 0x08, 0x04, 0x80, 0x00, 0x00, 0x10}, /* output fmt ctrl */ {0xb1, 0x5c, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10}, /* op mode ctrl */ - {0xb1, 0x5c, 0x02, 0x00, 0x16, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x03, 0x01, 0xe1, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x04, 0x02, 0x81, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x05, 0x00, 0x04, 0x00, 0x00, 0x10}, {0xb1, 0x5c, 0x01, 0x00, 0x04, 0x00, 0x00, 0x10}, /* sensor select */ - {0xb1, 0x5c, 0x02, 0x00, 0x16, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x03, 0x01, 0xe6, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x04, 0x02, 0x86, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x05, 0x00, 0x04, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x5c, 0x08, 0x00, 0x08, 0x00, 0x00, 0x10}, /* row start */ - {0xb1, 0x5c, 0x0e, 0x00, 0x08, 0x00, 0x00, 0x10}, {0xb1, 0x5c, 0x02, 0x00, 0x16, 0x00, 0x00, 0x10}, /* col start */ {0xb1, 0x5c, 0x03, 0x01, 0xe7, 0x00, 0x00, 0x10}, /* window height */ {0xb1, 0x5c, 0x04, 0x02, 0x87, 0x00, 0x00, 0x10}, /* window width */ @@ -872,15 +869,10 @@ static const u8 mt9v111_sensor_init[][8] = { {} }; static const u8 mt9v111_sensor_param1[][8] = { - {0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xb1, 0x5c, 0x09, 0x01, 0x2c, 0x00, 0x00, 0x10}, - {0xd1, 0x5c, 0x2b, 0x00, 0x33, 0x00, 0xa0, 0x10}, /* green1 gain */ - {0xd1, 0x5c, 0x2d, 0x00, 0xa0, 0x00, 0x33, 0x10}, /* red gain */ - /*******/ - {0xb1, 0x5c, 0x06, 0x00, 0x1e, 0x00, 0x00, 0x10}, /* vert blanking */ - {0xb1, 0x5c, 0x05, 0x00, 0x0a, 0x00, 0x00, 0x10}, /* horiz blanking */ - {0xd1, 0x5c, 0x2c, 0x00, 0xad, 0x00, 0xad, 0x10}, /* blue gain */ + {0xd1, 0x5c, 0x2b, 0x00, 0x33, 0x00, 0xad, 0x10}, /* G1 and B gains */ + {0xd1, 0x5c, 0x2d, 0x00, 0xad, 0x00, 0x33, 0x10}, /* R and G2 gains */ + {0xb1, 0x5c, 0x06, 0x00, 0x40, 0x00, 0x00, 0x10}, /* vert blanking */ + {0xb1, 0x5c, 0x05, 0x00, 0x09, 0x00, 0x00, 0x10}, /* horiz blanking */ {0xb1, 0x5c, 0x35, 0x01, 0xc0, 0x00, 0x00, 0x10}, /* global gain */ {} }; @@ -1784,7 +1776,12 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->ag_cnt = -1; sd->quality = QUALITY_DEF; - sd->jpegqual = 80; + + /* if USB 1.1, let some bandwidth for the audio device */ + if (gspca_dev->audio && gspca_dev->dev->speed < USB_SPEED_HIGH) + gspca_dev->nbalt--; + + INIT_WORK(&sd->work, qual_upd); return 0; } @@ -1794,7 +1791,7 @@ static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; const u8 *sn9c1xx; - u8 regGpio[] = { 0x29, 0x74 }; /* with audio */ + u8 regGpio[] = { 0x29, 0x70 }; /* no audio */ u8 regF1; /* setup a selector by bridge */ @@ -1806,6 +1803,8 @@ static int sd_init(struct gspca_dev *gspca_dev) if (gspca_dev->usb_err < 0) return gspca_dev->usb_err; PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1); + if (gspca_dev->audio) + regGpio[1] |= 0x04; /* with audio */ switch (sd->bridge) { case BRIDGE_SN9C102P: case BRIDGE_SN9C105: @@ -1838,14 +1837,7 @@ static int sd_init(struct gspca_dev *gspca_dev) case BRIDGE_SN9C102P: reg_w1(gspca_dev, 0x02, regGpio[1]); break; - case BRIDGE_SN9C105: - reg_w(gspca_dev, 0x01, regGpio, 2); - break; - case BRIDGE_SN9C110: - reg_w1(gspca_dev, 0x02, 0x62); - break; - case BRIDGE_SN9C120: - regGpio[1] = 0x70; /* no audio */ + default: reg_w(gspca_dev, 0x01, regGpio, 2); break; } @@ -1944,10 +1936,10 @@ static u32 setexposure(struct gspca_dev *gspca_dev, u8 expo_c1[] = { 0xb1, 0x5c, 0x09, 0x00, 0x00, 0x00, 0x00, 0x10 }; - if (expo > 0x0280) - expo = 0x0280; - else if (expo < 0x0040) - expo = 0x0040; + if (expo > 0x0390) + expo = 0x0390; + else if (expo < 0x0060) + expo = 0x0060; expo_c1[3] = expo >> 8; expo_c1[4] = expo; i2c_w8(gspca_dev, expo_c1); @@ -2004,10 +1996,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) sd->exposure = setexposure(gspca_dev, expo); break; case SENSOR_GC0307: - case SENSOR_MT9V111: expo = brightness; sd->exposure = setexposure(gspca_dev, expo); return; /* don't set the Y offset */ + case SENSOR_MT9V111: + expo = brightness << 2; + sd->exposure = setexposure(gspca_dev, expo); + return; /* don't set the Y offset */ case SENSOR_OM6802: expo = brightness << 2; sd->exposure = setexposure(gspca_dev, expo); @@ -2199,14 +2194,11 @@ static void setillum(struct gspca_dev *gspca_dev) sd->ctrls[ILLUM].val ? 0x64 : 0x60); break; case SENSOR_MT9V111: - if (starcam) - reg_w1(gspca_dev, 0x02, - sd->ctrls[ILLUM].val ? - 0x55 : 0x54); /* 370i */ - else - reg_w1(gspca_dev, 0x02, - sd->ctrls[ILLUM].val ? - 0x66 : 0x64); /* Clip */ + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? 0x77 : 0x74); +/* should have been: */ +/* 0x55 : 0x54); * 370i */ +/* 0x66 : 0x64); * Clip */ break; } } @@ -2271,18 +2263,12 @@ static void setfreq(struct gspca_dev *gspca_dev) static void setjpegqual(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int i, sc; - if (sd->jpegqual < 50) - sc = 5000 / sd->jpegqual; - else - sc = 200 - sd->jpegqual * 2; + jpeg_set_qual(sd->jpeg_hdr, sd->quality); #if USB_BUF_SZ < 64 #error "No room enough in usb_buf for quantization table" #endif - for (i = 0; i < 64; i++) - gspca_dev->usb_buf[i] = - (jpeg_head[JPEG_QT0_OFFSET + i] * sc + 50) / 100; + memcpy(gspca_dev->usb_buf, &sd->jpeg_hdr[JPEG_QT0_OFFSET], 64); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0x08, @@ -2290,9 +2276,7 @@ static void setjpegqual(struct gspca_dev *gspca_dev) 0x0100, 0, gspca_dev->usb_buf, 64, 500); - for (i = 0; i < 64; i++) - gspca_dev->usb_buf[i] = - (jpeg_head[JPEG_QT1_OFFSET + i] * sc + 50) / 100; + memcpy(gspca_dev->usb_buf, &sd->jpeg_hdr[JPEG_QT1_OFFSET], 64); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0x08, @@ -2305,6 +2289,19 @@ static void setjpegqual(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x18, sd->reg18); } +/* JPEG quality update */ +/* This function is executed from a work queue. */ +static void qual_upd(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + + mutex_lock(&gspca_dev->usb_lock); + PDEBUG(D_STREAM, "qual_upd %d%%", sd->quality); + setjpegqual(gspca_dev); + mutex_unlock(&gspca_dev->usb_lock); +} + /* -- start the camera -- */ static int sd_start(struct gspca_dev *gspca_dev) { @@ -2338,7 +2335,6 @@ static int sd_start(struct gspca_dev *gspca_dev) /* create the JPEG header */ jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width, 0x21); /* JPEG 422 */ - jpeg_set_qual(sd->jpeg_hdr, sd->quality); /* initialize the bridge */ sn9c1xx = sn_tb[sd->sensor]; @@ -2619,6 +2615,11 @@ static int sd_start(struct gspca_dev *gspca_dev) setcolors(gspca_dev); setautogain(gspca_dev); setfreq(gspca_dev); + + sd->pktsz = sd->npkt = 0; + sd->nchg = sd->short_mark = 0; + sd->work_thread = create_singlethread_workqueue(MODULE_NAME); + return gspca_dev->usb_err; } @@ -2695,6 +2696,20 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* reg_w1(gspca_dev, 0xf1, 0x01); */ } +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->work_thread != NULL) { + mutex_unlock(&gspca_dev->usb_lock); + destroy_workqueue(sd->work_thread); + mutex_lock(&gspca_dev->usb_lock); + sd->work_thread = NULL; + } +} + static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2732,6 +2747,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) (unsigned int) (expotimes << 8)); break; case SENSOR_OM6802: + case SENSOR_MT9V111: expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 2; if (expotimes < 0) @@ -2744,7 +2760,6 @@ static void do_autogain(struct gspca_dev *gspca_dev) /* case SENSOR_MO4000: */ /* case SENSOR_MI0360: */ /* case SENSOR_MI0360B: */ -/* case SENSOR_MT9V111: */ expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) @@ -2757,6 +2772,29 @@ static void do_autogain(struct gspca_dev *gspca_dev) } } +/* set the average luminosity from an isoc marker */ +static void set_lum(struct sd *sd, + u8 *data) +{ + int avg_lum; + + /* w0 w1 w2 + * w3 w4 w5 + * w6 w7 w8 + */ + avg_lum = (data[27] << 8) + data[28] /* w3 */ + + + (data[31] << 8) + data[32] /* w5 */ + + + (data[23] << 8) + data[24] /* w1 */ + + + (data[35] << 8) + data[36] /* w7 */ + + + (data[29] << 10) + (data[30] << 2); /* w4 * 4 */ + avg_lum >>= 10; + atomic_set(&sd->avg_lum, avg_lum); +} + /* scan the URB packets */ /* This function is run at interrupt level. */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, @@ -2764,70 +2802,141 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int sof, avg_lum; - - /* the image ends on a 64 bytes block starting with - * ff d9 ff ff 00 c4 c4 96 - * and followed by various information including luminosity */ - /* this block may be splitted between two packets */ - /* a new image always starts in a new packet */ - switch (gspca_dev->last_packet_type) { - case DISCARD_PACKET: /* restart image building */ - sof = len - 64; - if (sof >= 0 && data[sof] == 0xff && data[sof + 1] == 0xd9) - gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); - return; - case LAST_PACKET: /* put the JPEG 422 header */ + int i, new_qual; + + /* + * A frame ends on the marker + * ff ff 00 c4 c4 96 .. + * which is 62 bytes long and is followed by various information + * including statuses and luminosity. + * + * A marker may be splitted on two packets. + * + * The 6th byte of a marker contains the bits: + * 0x08: USB full + * 0xc0: frame sequence + * When the bit 'USB full' is set, the frame must be discarded; + * this is also the case when the 2 bytes before the marker are + * not the JPEG end of frame ('ff d9'). + */ + +/*fixme: assumption about the following code: + * - there can be only one marker in a packet + */ + + /* skip the remaining bytes of a short marker */ + i = sd->short_mark; + if (i != 0) { + sd->short_mark = 0; + if (i < 0 /* if 'ff' at end of previous packet */ + && data[0] == 0xff + && data[1] == 0x00) + goto marker_found; + if (data[0] == 0xff && data[1] == 0xff) { + i = 0; + goto marker_found; + } + len -= i; + if (len <= 0) + return; + data += i; + } + + /* count the packets and their size */ + sd->npkt++; + sd->pktsz += len; + + /* search backwards if there is a marker in the packet */ + for (i = len - 1; --i >= 0; ) { + if (data[i] != 0xff) { + i--; + continue; + } + if (data[i + 1] == 0xff) { + + /* (there may be 'ff ff' inside a marker) */ + if (i + 2 >= len || data[i + 2] == 0x00) + goto marker_found; + } + } + + /* no marker found */ + /* add the JPEG header if first fragment */ + if (data[len - 1] == 0xff) + sd->short_mark = -1; + if (gspca_dev->last_packet_type == LAST_PACKET) gspca_frame_add(gspca_dev, FIRST_PACKET, sd->jpeg_hdr, JPEG_HDR_SZ); - break; - } gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + return; + + /* marker found */ + /* if some error, discard the frame and decrease the quality */ +marker_found: + new_qual = 0; + if (i > 2) { + if (data[i - 2] != 0xff || data[i - 1] != 0xd9) { + gspca_dev->last_packet_type = DISCARD_PACKET; + new_qual = -3; + } + } else if (i + 6 < len) { + if (data[i + 6] & 0x08) { + gspca_dev->last_packet_type = DISCARD_PACKET; + new_qual = -5; + } + } - data = gspca_dev->image; - if (data == NULL) - return; - sof = gspca_dev->image_len - 64; - if (data[sof] != 0xff - || data[sof + 1] != 0xd9) - return; + gspca_frame_add(gspca_dev, LAST_PACKET, data, i); - /* end of image found - remove the trailing data */ - gspca_dev->image_len = sof + 2; - gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); - if (sd->ag_cnt < 0) - return; -/* w1 w2 w3 */ -/* w4 w5 w6 */ -/* w7 w8 */ -/* w4 */ - avg_lum = ((data[sof + 29] << 8) | data[sof + 30]) >> 6; -/* w6 */ - avg_lum += ((data[sof + 33] << 8) | data[sof + 34]) >> 6; -/* w2 */ - avg_lum += ((data[sof + 25] << 8) | data[sof + 26]) >> 6; -/* w8 */ - avg_lum += ((data[sof + 37] << 8) | data[sof + 38]) >> 6; -/* w5 */ - avg_lum += ((data[sof + 31] << 8) | data[sof + 32]) >> 4; - avg_lum >>= 4; - atomic_set(&sd->avg_lum, avg_lum); -} + /* compute the filling rate and a new JPEG quality */ + if (new_qual == 0) { + int r; -static int sd_set_jcomp(struct gspca_dev *gspca_dev, - struct v4l2_jpegcompression *jcomp) -{ - struct sd *sd = (struct sd *) gspca_dev; + r = (sd->pktsz * 100) / + (sd->npkt * + gspca_dev->urb[0]->iso_frame_desc[0].length); + if (r >= 85) + new_qual = -3; + else if (r < 75) + new_qual = 2; + } + if (new_qual != 0) { + sd->nchg += new_qual; + if (sd->nchg < -6 || sd->nchg >= 12) { + sd->nchg = 0; + new_qual += sd->quality; + if (new_qual < QUALITY_MIN) + new_qual = QUALITY_MIN; + else if (new_qual > QUALITY_MAX) + new_qual = QUALITY_MAX; + if (new_qual != sd->quality) { + sd->quality = new_qual; + queue_work(sd->work_thread, &sd->work); + } + } + } else { + sd->nchg = 0; + } + sd->pktsz = sd->npkt = 0; - if (jcomp->quality < QUALITY_MIN) - sd->quality = QUALITY_MIN; - else if (jcomp->quality > QUALITY_MAX) - sd->quality = QUALITY_MAX; - else - sd->quality = jcomp->quality; - if (gspca_dev->streaming) - jpeg_set_qual(sd->jpeg_hdr, sd->quality); - return 0; + /* if the marker is smaller than 62 bytes, + * memorize the number of bytes to skip in the next packet */ + if (i + 62 > len) { /* no more usable data */ + sd->short_mark = i + 62 - len; + return; + } + if (sd->ag_cnt >= 0) + set_lum(sd, data + i); + + /* if more data, start a new frame */ + i += 62; + if (i < len) { + data += i; + len -= i; + gspca_frame_add(gspca_dev, FIRST_PACKET, + sd->jpeg_hdr, JPEG_HDR_SZ); + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); + } } static int sd_get_jcomp(struct gspca_dev *gspca_dev, @@ -2891,10 +3000,10 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, .get_jcomp = sd_get_jcomp, - .set_jcomp = sd_set_jcomp, .querymenu = sd_querymenu, #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) .int_pkt_scan = sd_int_pkt_scan, @@ -3004,7 +3113,3 @@ static void __exit sd_mod_exit(void) module_init(sd_mod_init); module_exit(sd_mod_exit); - -module_param(starcam, int, 0644); -MODULE_PARM_DESC(starcam, - "StarCam model. 0: Clip, 1: 370i"); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 7e0661429293..abf1658fa33e 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -525,11 +525,9 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; - struct cam *cam; PDEBUG(D_PROBE, "Configuring camera"); - cam = &gspca_dev->cam; sd->desc = sd_desc; sd->bridge = id->driver_info; gspca_dev->sd_desc = &sd->desc; diff --git a/drivers/media/video/gspca/vicam.c b/drivers/media/video/gspca/vicam.c new file mode 100644 index 000000000000..84dfbab923b5 --- /dev/null +++ b/drivers/media/video/gspca/vicam.c @@ -0,0 +1,381 @@ +/* + * gspca ViCam subdriver + * + * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> + * + * Based on the usbvideo vicam driver, which is: + * + * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), + * Christopher L Cheney (ccheney@cheney.cx), + * Pavel Machek (pavel@ucw.cz), + * John Tyner (jtyner@cs.ucr.edu), + * Monroe Williams (monroe@pobox.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MODULE_NAME "vicam" +#define HEADER_SIZE 64 + +#include <linux/workqueue.h> +#include <linux/slab.h> +#include <linux/firmware.h> +#include <linux/ihex.h> +#include "gspca.h" + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("GSPCA ViCam USB Camera Driver"); +MODULE_LICENSE("GPL"); + +enum e_ctrl { + GAIN, + EXPOSURE, + NCTRL /* number of controls */ +}; + +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + struct work_struct work_struct; + struct workqueue_struct *work_thread; + struct gspca_ctrl ctrls[NCTRL]; +}; + +/* The vicam sensor has a resolution of 512 x 244, with I believe square + pixels, but this is forced to a 4:3 ratio by optics. So it has + non square pixels :( */ +static struct v4l2_pix_format vicam_mode[] = { + { 256, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 122, + .colorspace = V4L2_COLORSPACE_SRGB,}, + /* 2 modes with somewhat more square pixels */ + { 256, 200, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 200, + .colorspace = V4L2_COLORSPACE_SRGB,}, + { 256, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 256, + .sizeimage = 256 * 240, + .colorspace = V4L2_COLORSPACE_SRGB,}, +#if 0 /* This mode has extremely non square pixels, testing use only */ + { 512, 122, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 512, + .sizeimage = 512 * 122, + .colorspace = V4L2_COLORSPACE_SRGB,}, +#endif + { 512, 244, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE, + .bytesperline = 512, + .sizeimage = 512 * 244, + .colorspace = V4L2_COLORSPACE_SRGB,}, +}; + +static const struct ctrl sd_ctrls[] = { +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 200, + }, + }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 2047, + .step = 1, + .default_value = 256, + }, + }, +}; + +static int vicam_control_msg(struct gspca_dev *gspca_dev, u8 request, + u16 value, u16 index, u8 *data, u16 len) +{ + int ret; + + ret = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, data, len, 1000); + if (ret < 0) + err("control msg req %02X error %d", request, ret); + + return ret; +} + +static int vicam_set_camera_power(struct gspca_dev *gspca_dev, int state) +{ + int ret; + + ret = vicam_control_msg(gspca_dev, 0x50, state, 0, NULL, 0); + if (ret < 0) + return ret; + + if (state) + ret = vicam_control_msg(gspca_dev, 0x55, 1, 0, NULL, 0); + + return ret; +} + +/* + * request and read a block of data - see warning on vicam_command. + */ +static int vicam_read_frame(struct gspca_dev *gspca_dev, u8 *data, int size) +{ + struct sd *sd = (struct sd *)gspca_dev; + int ret, unscaled_height, act_len = 0; + u8 *req_data = gspca_dev->usb_buf; + + memset(req_data, 0, 16); + req_data[0] = sd->ctrls[GAIN].val; + if (gspca_dev->width == 256) + req_data[1] |= 0x01; /* low nibble x-scale */ + if (gspca_dev->height <= 122) { + req_data[1] |= 0x10; /* high nibble y-scale */ + unscaled_height = gspca_dev->height * 2; + } else + unscaled_height = gspca_dev->height; + req_data[2] = 0x90; /* unknown, does not seem to do anything */ + if (unscaled_height <= 200) + req_data[3] = 0x06; /* vend? */ + else if (unscaled_height <= 242) /* Yes 242 not 240 */ + req_data[3] = 0x07; /* vend? */ + else /* Up to 244 lines with req_data[3] == 0x08 */ + req_data[3] = 0x08; /* vend? */ + + if (sd->ctrls[EXPOSURE].val < 256) { + /* Frame rate maxed out, use partial frame expo time */ + req_data[4] = 255 - sd->ctrls[EXPOSURE].val; + req_data[5] = 0x00; + req_data[6] = 0x00; + req_data[7] = 0x01; + } else { + /* Modify frame rate */ + req_data[4] = 0x00; + req_data[5] = 0x00; + req_data[6] = sd->ctrls[EXPOSURE].val & 0xFF; + req_data[7] = sd->ctrls[EXPOSURE].val >> 8; + } + req_data[8] = ((244 - unscaled_height) / 2) & ~0x01; /* vstart */ + /* bytes 9-15 do not seem to affect exposure or image quality */ + + mutex_lock(&gspca_dev->usb_lock); + ret = vicam_control_msg(gspca_dev, 0x51, 0x80, 0, req_data, 16); + mutex_unlock(&gspca_dev->usb_lock); + if (ret < 0) + return ret; + + ret = usb_bulk_msg(gspca_dev->dev, + usb_rcvbulkpipe(gspca_dev->dev, 0x81), + data, size, &act_len, 10000); + /* successful, it returns 0, otherwise negative */ + if (ret < 0 || act_len != size) { + err("bulk read fail (%d) len %d/%d", + ret, act_len, size); + return -EIO; + } + return 0; +} + +/* This function is called as a workqueue function and runs whenever the camera + * is streaming data. Because it is a workqueue function it is allowed to sleep + * so we can use synchronous USB calls. To avoid possible collisions with other + * threads attempting to use the camera's USB interface we take the gspca + * usb_lock when performing USB operations. In practice the only thing we need + * to protect against is the usb_set_interface call that gspca makes during + * stream_off as the camera doesn't provide any controls that the user could try + * to change. + */ +static void vicam_dostream(struct work_struct *work) +{ + struct sd *sd = container_of(work, struct sd, work_struct); + struct gspca_dev *gspca_dev = &sd->gspca_dev; + int ret, frame_sz; + u8 *buffer; + + frame_sz = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].sizeimage + + HEADER_SIZE; + buffer = kmalloc(frame_sz, GFP_KERNEL | GFP_DMA); + if (!buffer) { + err("Couldn't allocate USB buffer"); + goto exit; + } + + while (gspca_dev->present && gspca_dev->streaming) { + ret = vicam_read_frame(gspca_dev, buffer, frame_sz); + if (ret < 0) + break; + + /* Note the frame header contents seem to be completely + constant, they do not change with either image, or + settings. So we simply discard it. The frames have + a very similar 64 byte footer, which we don't even + bother reading from the cam */ + gspca_frame_add(gspca_dev, FIRST_PACKET, + buffer + HEADER_SIZE, + frame_sz - HEADER_SIZE); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); + } +exit: + kfree(buffer); +} + +/* This function is called at probe time just before sd_init */ +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct cam *cam = &gspca_dev->cam; + struct sd *sd = (struct sd *)gspca_dev; + + /* We don't use the buffer gspca allocates so make it small. */ + cam->bulk = 1; + cam->bulk_size = 64; + cam->cam_mode = vicam_mode; + cam->nmodes = ARRAY_SIZE(vicam_mode); + cam->ctrls = sd->ctrls; + + INIT_WORK(&sd->work_struct, vicam_dostream); + + return 0; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + int ret; + const struct ihex_binrec *rec; + const struct firmware *uninitialized_var(fw); + u8 *firmware_buf; + + ret = request_ihex_firmware(&fw, "vicam/firmware.fw", + &gspca_dev->dev->dev); + if (ret) { + err("Failed to load \"vicam/firmware.fw\": %d\n", ret); + return ret; + } + + firmware_buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!firmware_buf) { + ret = -ENOMEM; + goto exit; + } + for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { + memcpy(firmware_buf, rec->data, be16_to_cpu(rec->len)); + ret = vicam_control_msg(gspca_dev, 0xff, 0, 0, firmware_buf, + be16_to_cpu(rec->len)); + if (ret < 0) + break; + } + + kfree(firmware_buf); +exit: + release_firmware(fw); + return ret; +} + +/* Set up for getting frames. */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *)gspca_dev; + int ret; + + ret = vicam_set_camera_power(gspca_dev, 1); + if (ret < 0) + return ret; + + /* Start the workqueue function to do the streaming */ + sd->work_thread = create_singlethread_workqueue(MODULE_NAME); + queue_work(sd->work_thread, &sd->work_struct); + + return 0; +} + +/* called on streamoff with alt==0 and on disconnect */ +/* the usb_lock is held at entry - restore on exit */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *dev = (struct sd *)gspca_dev; + + /* wait for the work queue to terminate */ + mutex_unlock(&gspca_dev->usb_lock); + /* This waits for vicam_dostream to finish */ + destroy_workqueue(dev->work_thread); + dev->work_thread = NULL; + mutex_lock(&gspca_dev->usb_lock); + + vicam_set_camera_power(gspca_dev, 0); +} + +/* Table of supported USB devices */ +static const struct usb_device_id device_table[] = { + {USB_DEVICE(0x04c1, 0x009d)}, + {USB_DEVICE(0x0602, 0x1001)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stop0 = sd_stop0, +}; + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, + &sd_desc, + sizeof(struct sd), + THIS_MODULE); +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + return usb_register(&sd_driver); +} + +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/video/gspca/zc3xx-reg.h b/drivers/media/video/gspca/zc3xx-reg.h index bfb559c3b713..a1bd94e8ce52 100644 --- a/drivers/media/video/gspca/zc3xx-reg.h +++ b/drivers/media/video/gspca/zc3xx-reg.h @@ -160,8 +160,6 @@ #define ZC3XX_R1A6_YMEANAFTERAE 0x01a6 #define ZC3XX_R1A7_CALCGLOBALMEAN 0x01a7 -#define ZC3XX_R1A2_BLUEMEANAFTERAGC 0x01a2 - /* Matrixes */ /* Color matrix is like : diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 47236a58bf33..fa164e861cde 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -1,7 +1,7 @@ /* * Z-Star/Vimicro zc301/zc302p/vc30x library * - * Copyright (C) 2009-2010 Jean-Francois Moine <http://moinejf.free.fr> + * Copyright (C) 2009-2011 Jean-Francois Moine <http://moinejf.free.fr> * Copyright (C) 2004 2005 2006 Michel Xhaard mxhaard@magic.fr * * This program is free software; you can redistribute it and/or modify @@ -39,6 +39,7 @@ static int force_sensor = -1; enum e_ctrl { BRIGHTNESS, CONTRAST, + EXPOSURE, GAMMA, AUTOGAIN, LIGHTFREQ, @@ -46,6 +47,8 @@ enum e_ctrl { NCTRLS /* number of controls */ }; +#define AUTOGAIN_DEF 1 + /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ @@ -73,7 +76,7 @@ enum sensors { SENSOR_CS2102K, SENSOR_GC0303, SENSOR_GC0305, - SENSOR_HDCS2020b, + SENSOR_HDCS2020, SENSOR_HV7131B, SENSOR_HV7131R, SENSOR_ICM105A, @@ -92,7 +95,8 @@ enum sensors { /* V4L2 controls supported by the driver */ static void setcontrast(struct gspca_dev *gspca_dev); -static void setautogain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static void setlightfreq(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); @@ -121,6 +125,18 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setcontrast }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0x30d, + .maximum = 0x493e, + .step = 1, + .default_value = 0x927 + }, + .set_control = setexposure + }, [GAMMA] = { { .id = V4L2_CID_GAMMA, @@ -141,9 +157,10 @@ static const struct ctrl sd_ctrls[NCTRLS] = { .minimum = 0, .maximum = 1, .step = 1, - .default_value = 1, + .default_value = AUTOGAIN_DEF, + .flags = V4L2_CTRL_FLAG_UPDATE }, - .set_control = setautogain + .set = sd_setautogain }, [LIGHTFREQ] = { { @@ -1498,7 +1515,7 @@ static const struct usb_action gc0305_NoFliker[] = { {} }; -static const struct usb_action hdcs2020b_InitialScale[] = { +static const struct usb_action hdcs2020_InitialScale[] = { {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x11, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* qtable 0x05 */ @@ -1630,7 +1647,7 @@ static const struct usb_action hdcs2020b_InitialScale[] = { {0xa0, 0x40, ZC3XX_R118_BGAIN}, {} }; -static const struct usb_action hdcs2020b_Initial[] = { +static const struct usb_action hdcs2020_Initial[] = { {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, @@ -1758,7 +1775,7 @@ static const struct usb_action hdcs2020b_Initial[] = { {0xa0, 0x40, ZC3XX_R118_BGAIN}, {} }; -static const struct usb_action hdcs2020b_50HZ[] = { +static const struct usb_action hdcs2020_50HZ[] = { {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */ {0xaa, 0x13, 0x0018}, /* 00,13,18,aa */ {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */ @@ -1779,7 +1796,7 @@ static const struct usb_action hdcs2020b_50HZ[] = { {0xa0, 0x2f, ZC3XX_R01F_HSYNC_2}, /* 00,1f,2f,cc */ {} }; -static const struct usb_action hdcs2020b_60HZ[] = { +static const struct usb_action hdcs2020_60HZ[] = { {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */ {0xaa, 0x13, 0x0031}, /* 00,13,31,aa */ {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */ @@ -1800,7 +1817,7 @@ static const struct usb_action hdcs2020b_60HZ[] = { {0xa0, 0x2c, ZC3XX_R01F_HSYNC_2}, /* 00,1f,2c,cc */ {} }; -static const struct usb_action hdcs2020b_NoFliker[] = { +static const struct usb_action hdcs2020_NoFliker[] = { {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */ {0xaa, 0x13, 0x0010}, /* 00,13,10,aa */ {0xaa, 0x14, 0x0001}, /* 00,14,01,aa */ @@ -2126,7 +2143,6 @@ static const struct usb_action hv7131r_Initial[] = { {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW}, {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH}, {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW}, - {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW}, {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW}, {0xa0, 0x01, ZC3XX_R09B_WINHEIGHTHIGH}, @@ -2878,7 +2894,7 @@ static const struct usb_action mc501cb_Initial[] = { {0xaa, 0x11, 0x0001}, /* 00,11,01,aa */ {0xaa, 0x30, 0x0000}, /* 00,30,00,aa */ {0xaa, 0x60, 0x0000}, /* 00,60,00,aa */ - {0xaa, 0xa0, ZC3XX_R01A_LASTFRAMESTATE}, /* 00,a0,1a,aa */ + {0xaa, 0xa0, 0x001a}, /* 00,a0,1a,aa */ {0xaa, 0xa1, 0x0000}, /* 00,a1,00,aa */ {0xaa, 0xa2, 0x003f}, /* 00,a2,3f,aa */ {0xaa, 0xa3, 0x0028}, /* 00,a3,28,aa */ @@ -2998,7 +3014,7 @@ static const struct usb_action mc501cb_InitialScale[] = { /* 320x240 */ {0xaa, 0x11, 0x0001}, /* 00,11,01,aa */ {0xaa, 0x30, 0x0000}, /* 00,30,00,aa */ {0xaa, 0x60, 0x0000}, /* 00,60,00,aa */ - {0xaa, 0xa0, ZC3XX_R01A_LASTFRAMESTATE}, /* 00,a0,1a,aa */ + {0xaa, 0xa0, 0x001a}, /* 00,a0,1a,aa */ {0xaa, 0xa1, 0x0000}, /* 00,a1,00,aa */ {0xaa, 0xa2, 0x003f}, /* 00,a2,3f,aa */ {0xaa, 0xa3, 0x0028}, /* 00,a3,28,aa */ @@ -3310,7 +3326,7 @@ static const struct usb_action ov7620_50HZ[] = { {0xaa, 0x10, 0x0082}, /* 00,10,82,aa */ {0xaa, 0x76, 0x0003}, /* 00,76,03,aa */ /* {0xa0, 0x40, ZC3XX_R002_CLOCKSELECT}, * 00,02,40,cc - if mode0 (640x480) */ + * if mode0 (640x480) */ {} }; static const struct usb_action ov7620_60HZ[] = { @@ -5828,7 +5844,7 @@ static void setmatrix(struct gspca_dev *gspca_dev) [SENSOR_CS2102K] = NULL, [SENSOR_GC0303] = gc0303_matrix, [SENSOR_GC0305] = gc0305_matrix, - [SENSOR_HDCS2020b] = NULL, + [SENSOR_HDCS2020] = NULL, [SENSOR_HV7131B] = NULL, [SENSOR_HV7131R] = po2030_matrix, [SENSOR_ICM105A] = po2030_matrix, @@ -5927,6 +5943,26 @@ static void setcontrast(struct gspca_dev *gspca_dev) reg_w(gspca_dev, gr[i], 0x0130 + i); /* gradient */ } +static void getexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->ctrls[EXPOSURE].val = (i2c_read(gspca_dev, 0x25) << 9) + | (i2c_read(gspca_dev, 0x26) << 1) + | (i2c_read(gspca_dev, 0x27) >> 7); +} + +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int val; + + val = sd->ctrls[EXPOSURE].val; + i2c_write(gspca_dev, 0x25, val >> 9, 0x00); + i2c_write(gspca_dev, 0x26, val >> 1, 0x00); + i2c_write(gspca_dev, 0x27, val << 7, 0x00); +} + static void setquality(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -5990,10 +6026,10 @@ static void setlightfreq(struct gspca_dev *gspca_dev) {gc0305_NoFliker, gc0305_NoFliker, gc0305_50HZ, gc0305_50HZ, gc0305_60HZ, gc0305_60HZ}, - [SENSOR_HDCS2020b] = - {hdcs2020b_NoFliker, hdcs2020b_NoFliker, - hdcs2020b_50HZ, hdcs2020b_50HZ, - hdcs2020b_60HZ, hdcs2020b_60HZ}, + [SENSOR_HDCS2020] = + {hdcs2020_NoFliker, hdcs2020_NoFliker, + hdcs2020_50HZ, hdcs2020_50HZ, + hdcs2020_60HZ, hdcs2020_60HZ}, [SENSOR_HV7131B] = {hv7131b_NoFliker, hv7131b_NoFlikerScale, hv7131b_50HZ, hv7131b_50HZScale, @@ -6091,7 +6127,7 @@ static void setautogain(struct gspca_dev *gspca_dev) static void send_unknown(struct gspca_dev *gspca_dev, int sensor) { - reg_w(gspca_dev, 0x01, 0x0000); /* led off */ + reg_w(gspca_dev, 0x01, 0x0000); /* bridge reset */ switch (sensor) { case SENSOR_PAS106: reg_w(gspca_dev, 0x03, 0x003a); @@ -6310,6 +6346,7 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev) return 0x0a; /* PB0330 */ } + /* probe gc0303 / gc0305 */ reg_w(gspca_dev, 0x01, 0x0000); reg_w(gspca_dev, 0x01, 0x0001); reg_w(gspca_dev, 0x98, 0x008b); @@ -6414,6 +6451,10 @@ static int sd_config(struct gspca_dev *gspca_dev, gspca_dev->cam.ctrls = sd->ctrls; sd->quality = QUALITY_DEF; + /* if USB 1.1, let some bandwidth for the audio device */ + if (gspca_dev->audio && gspca_dev->dev->speed < USB_SPEED_HIGH) + gspca_dev->nbalt--; + return 0; } @@ -6429,7 +6470,7 @@ static int sd_init(struct gspca_dev *gspca_dev) [SENSOR_CS2102K] = 5, [SENSOR_GC0303] = 3, [SENSOR_GC0305] = 4, - [SENSOR_HDCS2020b] = 4, + [SENSOR_HDCS2020] = 4, [SENSOR_HV7131B] = 4, [SENSOR_HV7131R] = 4, [SENSOR_ICM105A] = 4, @@ -6450,7 +6491,7 @@ static int sd_init(struct gspca_dev *gspca_dev) [SENSOR_CS2102K] = 1, [SENSOR_GC0303] = 1, [SENSOR_GC0305] = 1, - [SENSOR_HDCS2020b] = 1, + [SENSOR_HDCS2020] = 1, [SENSOR_HV7131B] = 1, [SENSOR_HV7131R] = 1, [SENSOR_ICM105A] = 1, @@ -6513,8 +6554,8 @@ static int sd_init(struct gspca_dev *gspca_dev) sd->sensor = SENSOR_CS2102; break; case 0x08: - PDEBUG(D_PROBE, "Find Sensor HDCS2020(b)"); - sd->sensor = SENSOR_HDCS2020b; + PDEBUG(D_PROBE, "Find Sensor HDCS2020"); + sd->sensor = SENSOR_HDCS2020; break; case 0x0a: PDEBUG(D_PROBE, @@ -6619,10 +6660,19 @@ static int sd_init(struct gspca_dev *gspca_dev) sd->ctrls[GAMMA].def = gamma[sd->sensor]; switch (sd->sensor) { + case SENSOR_HV7131R: + break; case SENSOR_OV7630C: - gspca_dev->ctrl_dis = (1 << LIGHTFREQ); + gspca_dev->ctrl_dis = (1 << LIGHTFREQ) | (1 << EXPOSURE); + break; + default: + gspca_dev->ctrl_dis = (1 << EXPOSURE); break; } +#if AUTOGAIN_DEF + if (sd->ctrls[AUTOGAIN].val) + gspca_dev->ctrl_inac = (1 << EXPOSURE); +#endif /* switch off the led */ reg_w(gspca_dev, 0x01, 0x0000); @@ -6644,8 +6694,8 @@ static int sd_start(struct gspca_dev *gspca_dev) {gc0303_Initial, gc0303_InitialScale}, [SENSOR_GC0305] = {gc0305_Initial, gc0305_InitialScale}, - [SENSOR_HDCS2020b] = - {hdcs2020b_Initial, hdcs2020b_InitialScale}, + [SENSOR_HDCS2020] = + {hdcs2020_Initial, hdcs2020_InitialScale}, [SENSOR_HV7131B] = {hv7131b_Initial, hv7131b_InitialScale}, [SENSOR_HV7131R] = @@ -6739,7 +6789,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* set the gamma tables when not set */ switch (sd->sensor) { case SENSOR_CS2102K: /* gamma set in xxx_Initial */ - case SENSOR_HDCS2020b: + case SENSOR_HDCS2020: case SENSOR_OV7630C: break; default: @@ -6768,9 +6818,8 @@ static int sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x40, 0x0117); break; case SENSOR_HV7131R: - i2c_write(gspca_dev, 0x25, 0x04, 0x00); /* exposure */ - i2c_write(gspca_dev, 0x26, 0x93, 0x00); - i2c_write(gspca_dev, 0x27, 0xe0, 0x00); + if (!sd->ctrls[AUTOGAIN].val) + setexposure(gspca_dev); reg_w(gspca_dev, 0x00, ZC3XX_R1A7_CALCGLOBALMEAN); break; case SENSOR_GC0305: @@ -6848,6 +6897,23 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } +static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->ctrls[AUTOGAIN].val = val; + if (val) { + gspca_dev->ctrl_inac |= (1 << EXPOSURE); + } else { + gspca_dev->ctrl_inac &= ~(1 << EXPOSURE); + if (gspca_dev->streaming) + getexposure(gspca_dev); + } + if (gspca_dev->streaming) + setautogain(gspca_dev); + return gspca_dev->usb_err; +} + static int sd_querymenu(struct gspca_dev *gspca_dev, struct v4l2_querymenu *menu) { diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index e53fa55d56a1..2a1ac287591d 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -52,25 +52,36 @@ struct i2c_client *hdpvr_register_ir_rx_i2c(struct hdpvr_device *dev) }; /* Our default information for ir-kbd-i2c.c to use */ - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; init_data->name = "HD-PVR"; + init_data->polling_interval = 405; /* ms, duplicated from Windows */ hdpvr_ir_rx_i2c_board_info.platform_data = init_data; return i2c_new_device(&dev->i2c_adapter, &hdpvr_ir_rx_i2c_board_info); } static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, - unsigned char addr, char *data, int len) + unsigned char addr, char *wdata, int wlen, + char *data, int len) { int ret; - if (len > sizeof(dev->i2c_buf)) + if ((len > sizeof(dev->i2c_buf)) || (wlen > sizeof(dev->i2c_buf))) return -EINVAL; - ret = usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), + if (wlen) { + memcpy(&dev->i2c_buf, wdata, wlen); + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, + (bus << 8) | addr, 0, &dev->i2c_buf, + wlen, 1000); + if (ret < 0) + return ret; + } + + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_READ, CTRL_READ_REQUEST, (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); @@ -92,16 +103,14 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, int bus, return -EINVAL; memcpy(&dev->i2c_buf, data, len); - ret = usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); if (ret < 0) return ret; - ret = usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST, 0, 0, &dev->i2c_buf, 2, 1000); @@ -117,24 +126,49 @@ static int hdpvr_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs, int num) { struct hdpvr_device *dev = i2c_get_adapdata(i2c_adapter); - int retval = 0, i, addr; + int retval = 0, addr; if (num <= 0) return 0; mutex_lock(&dev->i2c_mutex); - for (i = 0; i < num && !retval; i++) { - addr = msgs[i].addr << 1; + addr = msgs[0].addr << 1; - if (msgs[i].flags & I2C_M_RD) - retval = hdpvr_i2c_read(dev, 1, addr, msgs[i].buf, - msgs[i].len); + if (num == 1) { + if (msgs[0].flags & I2C_M_RD) + retval = hdpvr_i2c_read(dev, 1, addr, NULL, 0, + msgs[0].buf, msgs[0].len); else - retval = hdpvr_i2c_write(dev, 1, addr, msgs[i].buf, - msgs[i].len); + retval = hdpvr_i2c_write(dev, 1, addr, msgs[0].buf, + msgs[0].len); + } else if (num == 2) { + if (msgs[0].addr != msgs[1].addr) { + v4l2_warn(&dev->v4l2_dev, "refusing 2-phase i2c xfer " + "with conflicting target addresses\n"); + retval = -EINVAL; + goto out; + } + + if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD)) { + v4l2_warn(&dev->v4l2_dev, "refusing complex xfer with " + "r0=%d, r1=%d\n", msgs[0].flags & I2C_M_RD, + msgs[1].flags & I2C_M_RD); + retval = -EINVAL; + goto out; + } + + /* + * Write followed by atomic read is the only complex xfer that + * we actually support here. + */ + retval = hdpvr_i2c_read(dev, 1, addr, msgs[0].buf, msgs[0].len, + msgs[1].buf, msgs[1].len); + } else { + v4l2_warn(&dev->v4l2_dev, "refusing %d-phase i2c xfer\n", num); } +out: mutex_unlock(&dev->i2c_mutex); return retval ? retval : num; @@ -158,11 +192,11 @@ static struct i2c_adapter hdpvr_i2c_adapter_template = { static int hdpvr_activate_ir(struct hdpvr_device *dev) { - char buffer[8]; + char buffer[2]; mutex_lock(&dev->i2c_mutex); - hdpvr_i2c_read(dev, 0, 0x54, buffer, 1); + hdpvr_i2c_read(dev, 0, 0x54, NULL, 0, buffer, 1); buffer[0] = 0; buffer[1] = 0x8; diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index a221ad68b330..3ab875d036e1 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -55,10 +55,6 @@ static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ -static int hauppauge; -module_param(hauppauge, int, 0644); /* Choose Hauppauge remote */ -MODULE_PARM_DESC(hauppauge, "Specify Hauppauge remote: 0=black, 1=grey (defaults to 0)"); - #define MODULE_NAME "ir-kbd-i2c" #define dprintk(level, fmt, arg...) if (debug >= level) \ @@ -105,10 +101,6 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, /* invalid key press */ return 0; - if (dev!=0x1e && dev!=0x1f) - /* not a hauppauge remote */ - return 0; - if (!range) code += 64; @@ -116,7 +108,7 @@ static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw, start, range, toggle, dev, code); /* return key */ - *ir_key = code; + *ir_key = (dev << 8) | code; *ir_raw = ircode; return 1; } @@ -312,11 +304,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) name = "Hauppauge"; ir->get_key = get_key_haup; rc_type = RC_TYPE_RC5; - if (hauppauge == 1) { - ir_codes = RC_MAP_HAUPPAUGE_NEW; - } else { - ir_codes = RC_MAP_RC5_TV; - } + ir_codes = RC_MAP_HAUPPAUGE; break; case 0x30: name = "KNC One"; @@ -340,7 +328,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) name = "Hauppauge/Zilog Z8"; ir->get_key = get_key_haup_xvr; rc_type = RC_TYPE_RC5; - ir_codes = hauppauge ? RC_MAP_HAUPPAUGE_NEW : RC_MAP_RC5_TV; + ir_codes = RC_MAP_HAUPPAUGE; break; } diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 04bacdbd10bb..84bdf0f42a8e 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -383,7 +383,6 @@ struct ivtv_open_id { u32 open_id; /* unique ID for this file descriptor */ int type; /* stream type */ int yuv_frames; /* 1: started OUT_UDMA_YUV output mode */ - enum v4l2_priority prio; /* priority */ struct ivtv *itv; }; @@ -710,7 +709,6 @@ struct ivtv { /* Miscellaneous */ u32 open_id; /* incremented each time an open occurs, is >= 1 */ - struct v4l2_prio_state prio; /* priority state */ int search_pack_header; /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */ int speed; /* current playback speed setting */ u8 speed_mute_audio; /* 1 if audio should be muted when fast forward */ diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index c57a58523ca8..a7f54b010a5c 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -856,7 +856,6 @@ int ivtv_v4l2_close(struct file *filp) IVTV_DEBUG_FILE("close %s\n", s->name); - v4l2_prio_close(&itv->prio, id->prio); v4l2_fh_del(fh); v4l2_fh_exit(fh); @@ -973,7 +972,6 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) } item->itv = itv; item->type = s->type; - v4l2_prio_open(&itv->prio, &item->prio); item->open_id = itv->open_id++; filp->private_data = &item->fh; @@ -982,6 +980,7 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) /* Try to claim this stream */ if (ivtv_claim_stream(item, item->type)) { /* No, it's already in use */ + v4l2_fh_exit(&item->fh); kfree(item); return -EBUSY; } diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 9fb86a081c0f..d47f41a0ef66 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -205,15 +205,14 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr) break; case IVTV_HW_I2C_IR_RX_HAUP_EXT: case IVTV_HW_I2C_IR_RX_HAUP_INT: - /* Default to old black remote */ - init_data->ir_codes = RC_MAP_RC5_TV; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; init_data->type = RC_TYPE_RC5; init_data->name = itv->card_name; break; case IVTV_HW_Z8F0811_IR_RX_HAUP: /* Default to grey remote */ - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; init_data->name = itv->card_name; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index b686da5e4326..1689783cd19a 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -313,7 +313,7 @@ static int ivtv_video_command(struct ivtv *itv, struct ivtv_open_id *id, static int ivtv_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; vbifmt->reserved[0] = 0; @@ -334,7 +334,7 @@ static int ivtv_g_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_fo static int ivtv_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; @@ -358,7 +358,7 @@ static int ivtv_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f static int ivtv_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; struct v4l2_vbi_format *vbifmt = &fmt->fmt.vbi; vbifmt->sampling_rate = 27000000; @@ -377,7 +377,7 @@ static int ivtv_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; vbifmt->reserved[0] = 0; @@ -398,7 +398,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo static int ivtv_g_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; @@ -439,7 +439,7 @@ static int ivtv_g_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *f static int ivtv_g_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; struct v4l2_window *winfmt = &fmt->fmt.win; if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) @@ -463,7 +463,7 @@ static int ivtv_try_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; int w = fmt->fmt.pix.width; int h = fmt->fmt.pix.height; @@ -492,7 +492,7 @@ static int ivtv_try_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; if (id->type == IVTV_DEC_STREAM_TYPE_VBI) @@ -512,7 +512,7 @@ static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); s32 w = fmt->fmt.pix.width; s32 h = fmt->fmt.pix.height; int field = fmt->fmt.pix.field; @@ -546,7 +546,7 @@ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format static int ivtv_try_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; u32 chromakey = fmt->fmt.win.chromakey; u8 global_alpha = fmt->fmt.win.global_alpha; @@ -565,7 +565,7 @@ static int ivtv_s_fmt_sliced_vbi_out(struct file *file, void *fh, struct v4l2_fo static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct v4l2_mbus_framefmt mbus_fmt; int ret = ivtv_try_fmt_vid_cap(file, fh, fmt); @@ -594,7 +594,7 @@ static int ivtv_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (!ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0) return -EBUSY; @@ -607,7 +607,7 @@ static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_format *fmt) { struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; int ret = ivtv_try_fmt_sliced_vbi_cap(file, fh, fmt); @@ -625,7 +625,7 @@ static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo static int ivtv_s_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct yuv_playback_info *yi = &itv->yuv_info; int ret = ivtv_try_fmt_vid_out(file, fh, fmt); @@ -670,7 +670,7 @@ static int ivtv_s_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *f static int ivtv_s_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_format *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; int ret = ivtv_try_fmt_vid_out_overlay(file, fh, fmt); if (ret == 0) { @@ -683,7 +683,7 @@ static int ivtv_s_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_f static int ivtv_g_chip_ident(struct file *file, void *fh, struct v4l2_dbg_chip_ident *chip) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; chip->ident = V4L2_IDENT_NONE; chip->revision = 0; @@ -727,7 +727,7 @@ static int ivtv_itvc(struct ivtv *itv, unsigned int cmd, void *arg) static int ivtv_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (v4l2_chip_match_host(®->match)) return ivtv_itvc(itv, VIDIOC_DBG_G_REGISTER, reg); @@ -739,7 +739,7 @@ static int ivtv_g_register(struct file *file, void *fh, struct v4l2_dbg_register static int ivtv_s_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (v4l2_chip_match_host(®->match)) return ivtv_itvc(itv, VIDIOC_DBG_S_REGISTER, reg); @@ -750,26 +750,9 @@ static int ivtv_s_register(struct file *file, void *fh, struct v4l2_dbg_register } #endif -static int ivtv_g_priority(struct file *file, void *fh, enum v4l2_priority *p) -{ - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; - - *p = v4l2_prio_max(&itv->prio); - - return 0; -} - -static int ivtv_s_priority(struct file *file, void *fh, enum v4l2_priority prio) -{ - struct ivtv_open_id *id = fh; - struct ivtv *itv = id->itv; - - return v4l2_prio_change(&itv->prio, &id->prio, prio); -} - static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vcap) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); @@ -781,14 +764,14 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc static int ivtv_enumaudio(struct file *file, void *fh, struct v4l2_audio *vin) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; return ivtv_get_audio_input(itv, vin->index, vin); } static int ivtv_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; vin->index = itv->audio_input; return ivtv_get_audio_input(itv, vin->index, vin); @@ -796,7 +779,7 @@ static int ivtv_g_audio(struct file *file, void *fh, struct v4l2_audio *vin) static int ivtv_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (vout->index >= itv->nof_audio_inputs) return -EINVAL; @@ -809,7 +792,7 @@ static int ivtv_s_audio(struct file *file, void *fh, struct v4l2_audio *vout) static int ivtv_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vin) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; /* set it to defaults from our table */ return ivtv_get_audio_output(itv, vin->index, vin); @@ -817,7 +800,7 @@ static int ivtv_enumaudout(struct file *file, void *fh, struct v4l2_audioout *vi static int ivtv_g_audout(struct file *file, void *fh, struct v4l2_audioout *vin) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; vin->index = 0; return ivtv_get_audio_output(itv, vin->index, vin); @@ -825,14 +808,14 @@ static int ivtv_g_audout(struct file *file, void *fh, struct v4l2_audioout *vin) static int ivtv_s_audout(struct file *file, void *fh, struct v4l2_audioout *vout) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; return ivtv_get_audio_output(itv, vout->index, vout); } static int ivtv_enum_input(struct file *file, void *fh, struct v4l2_input *vin) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; /* set it to defaults from our table */ return ivtv_get_input(itv, vin->index, vin); @@ -840,14 +823,14 @@ static int ivtv_enum_input(struct file *file, void *fh, struct v4l2_input *vin) static int ivtv_enum_output(struct file *file, void *fh, struct v4l2_output *vout) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; return ivtv_get_output(itv, vout->index, vout); } static int ivtv_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct yuv_playback_info *yi = &itv->yuv_info; int streamtype; @@ -884,7 +867,7 @@ static int ivtv_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropca static int ivtv_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct yuv_playback_info *yi = &itv->yuv_info; int streamtype; @@ -910,7 +893,7 @@ static int ivtv_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) static int ivtv_g_crop(struct file *file, void *fh, struct v4l2_crop *crop) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct yuv_playback_info *yi = &itv->yuv_info; int streamtype; @@ -952,7 +935,7 @@ static int ivtv_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdes static int ivtv_enum_fmt_vid_out(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; static struct v4l2_fmtdesc formats[] = { { 0, 0, 0, @@ -980,7 +963,7 @@ static int ivtv_enum_fmt_vid_out(struct file *file, void *fh, struct v4l2_fmtdes static int ivtv_g_input(struct file *file, void *fh, unsigned int *i) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; *i = itv->active_input; @@ -989,7 +972,7 @@ static int ivtv_g_input(struct file *file, void *fh, unsigned int *i) int ivtv_s_input(struct file *file, void *fh, unsigned int inp) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (inp < 0 || inp >= itv->nof_inputs) return -EINVAL; @@ -1023,7 +1006,7 @@ int ivtv_s_input(struct file *file, void *fh, unsigned int inp) static int ivtv_g_output(struct file *file, void *fh, unsigned int *i) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; @@ -1035,7 +1018,7 @@ static int ivtv_g_output(struct file *file, void *fh, unsigned int *i) static int ivtv_s_output(struct file *file, void *fh, unsigned int outp) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (outp >= itv->card->nof_outputs) return -EINVAL; @@ -1057,7 +1040,7 @@ static int ivtv_s_output(struct file *file, void *fh, unsigned int outp) static int ivtv_g_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (vf->tuner != 0) return -EINVAL; @@ -1068,7 +1051,7 @@ static int ivtv_g_frequency(struct file *file, void *fh, struct v4l2_frequency * int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (vf->tuner != 0) return -EINVAL; @@ -1082,7 +1065,7 @@ int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf) static int ivtv_g_std(struct file *file, void *fh, v4l2_std_id *std) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; *std = itv->std; return 0; @@ -1091,7 +1074,7 @@ static int ivtv_g_std(struct file *file, void *fh, v4l2_std_id *std) int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std) { DEFINE_WAIT(wait); - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; struct yuv_playback_info *yi = &itv->yuv_info; int f; @@ -1170,7 +1153,7 @@ int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std) static int ivtv_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; if (vt->index != 0) @@ -1183,7 +1166,7 @@ static int ivtv_s_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; if (vt->index != 0) return -EINVAL; @@ -1203,7 +1186,7 @@ static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) static int ivtv_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced_vbi_cap *cap) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; int set = itv->is_50hz ? V4L2_SLICED_VBI_625 : V4L2_SLICED_VBI_525; int f, l; @@ -1233,7 +1216,7 @@ static int ivtv_g_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_sliced static int ivtv_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *idx) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; struct v4l2_enc_idx_entry *e = idx->entry; int entries; int i; @@ -1256,7 +1239,7 @@ static int ivtv_g_enc_index(struct file *file, void *fh, struct v4l2_enc_idx *id static int ivtv_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; @@ -1308,7 +1291,7 @@ static int ivtv_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd static int ivtv_try_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder_cmd *enc) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; switch (enc->cmd) { case V4L2_ENC_CMD_START: @@ -1338,7 +1321,7 @@ static int ivtv_try_encoder_cmd(struct file *file, void *fh, struct v4l2_encoder static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; u32 data[CX2341X_MBOX_MAX_DATA]; struct yuv_playback_info *yi = &itv->yuv_info; @@ -1425,7 +1408,7 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) static int ivtv_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; struct yuv_playback_info *yi = &itv->yuv_info; @@ -1445,7 +1428,7 @@ static int ivtv_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) static int ivtv_overlay(struct file *file, void *fh, unsigned int on) { - struct ivtv_open_id *id = fh; + struct ivtv_open_id *id = fh2id(fh); struct ivtv *itv = id->itv; if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) @@ -1470,7 +1453,7 @@ static int ivtv_subscribe_event(struct v4l2_fh *fh, struct v4l2_event_subscripti static int ivtv_log_status(struct file *file, void *fh) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; u32 data[CX2341X_MBOX_MAX_DATA]; int has_output = itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT; @@ -1795,9 +1778,25 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) return 0; } -static long ivtv_default(struct file *file, void *fh, int cmd, void *arg) +static long ivtv_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) { - struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv; + struct ivtv *itv = fh2id(fh)->itv; + + if (!valid_prio) { + switch (cmd) { + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_SELECT_SOURCE: + case AUDIO_SET_MUTE: + case AUDIO_CHANNEL_SELECT: + case AUDIO_BILINGUAL_CHANNEL_SELECT: + return -EBUSY; + } + } switch (cmd) { case VIDIOC_INT_RESET: { @@ -1836,30 +1835,8 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vfd = video_devdata(filp); - struct ivtv_open_id *id = fh2id(filp->private_data); long ret; - /* check priority */ - switch (cmd) { - case VIDIOC_S_CTRL: - case VIDIOC_S_STD: - case VIDIOC_S_INPUT: - case VIDIOC_S_OUTPUT: - case VIDIOC_S_TUNER: - case VIDIOC_S_FREQUENCY: - case VIDIOC_S_FMT: - case VIDIOC_S_CROP: - case VIDIOC_S_AUDIO: - case VIDIOC_S_AUDOUT: - case VIDIOC_S_EXT_CTRLS: - case VIDIOC_S_FBUF: - case VIDIOC_S_PRIORITY: - case VIDIOC_OVERLAY: - ret = v4l2_prio_check(&itv->prio, id->prio); - if (ret) - return ret; - } - if (ivtv_debug & IVTV_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; ret = video_ioctl2(filp, cmd, arg); @@ -1884,8 +1861,6 @@ long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) static const struct v4l2_ioctl_ops ivtv_ioctl_ops = { .vidioc_querycap = ivtv_querycap, - .vidioc_g_priority = ivtv_g_priority, - .vidioc_s_priority = ivtv_s_priority, .vidioc_s_audio = ivtv_s_audio, .vidioc_g_audio = ivtv_g_audio, .vidioc_enumaudio = ivtv_enumaudio, diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 512607e0cda3..942683336555 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -214,6 +214,7 @@ static int ivtv_prep_dev(struct ivtv *itv, int type) s->vdev->fops = ivtv_stream_info[type].fops; s->vdev->release = video_device_release; s->vdev->tvnorms = V4L2_STD_ALL; + set_bit(V4L2_FL_USE_FH_PRIO, &s->vdev->flags); ivtv_set_funcs(s->vdev); return 0; } diff --git a/drivers/media/video/ivtv/ivtv-udma.c b/drivers/media/video/ivtv/ivtv-udma.c index 1daf1dd65bf7..69cc8166b20b 100644 --- a/drivers/media/video/ivtv/ivtv-udma.c +++ b/drivers/media/video/ivtv/ivtv-udma.c @@ -132,7 +132,12 @@ int ivtv_udma_setup(struct ivtv *itv, unsigned long ivtv_dest_addr, if (user_dma.page_count != err) { IVTV_DEBUG_WARN("failed to map user pages, returned %d instead of %d\n", err, user_dma.page_count); - return -EINVAL; + if (err >= 0) { + for (i = 0; i < err; i++) + put_page(dma->map[i]); + return -EINVAL; + } + return err; } dma->page_count = user_dma.page_count; diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c index 2dfa957b0fd5..b6eb51ce7735 100644 --- a/drivers/media/video/ivtv/ivtv-vbi.c +++ b/drivers/media/video/ivtv/ivtv-vbi.c @@ -174,7 +174,7 @@ ivtv_write_vbi_from_user(struct ivtv *itv, ret = -EFAULT; break; } - ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc); + ivtv_write_vbi_line(itv, &d, &cc, &found_cc); } if (found_cc) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index c0875378acc2..dcbab6ad4c26 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -77,23 +77,51 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, /* Get user pages for DMA Xfer */ down_read(¤t->mm->mmap_sem); y_pages = get_user_pages(current, current->mm, y_dma.uaddr, y_dma.page_count, 0, 1, &dma->map[0], NULL); - uv_pages = get_user_pages(current, current->mm, uv_dma.uaddr, uv_dma.page_count, 0, 1, &dma->map[y_pages], NULL); + uv_pages = 0; /* silence gcc. value is set and consumed only if: */ + if (y_pages == y_dma.page_count) { + uv_pages = get_user_pages(current, current->mm, + uv_dma.uaddr, uv_dma.page_count, 0, 1, + &dma->map[y_pages], NULL); + } up_read(¤t->mm->mmap_sem); - dma->page_count = y_dma.page_count + uv_dma.page_count; - - if (y_pages + uv_pages != dma->page_count) { - IVTV_DEBUG_WARN - ("failed to map user pages, returned %d instead of %d\n", - y_pages + uv_pages, dma->page_count); - - for (i = 0; i < dma->page_count; i++) { - put_page(dma->map[i]); + if (y_pages != y_dma.page_count || uv_pages != uv_dma.page_count) { + int rc = -EFAULT; + + if (y_pages == y_dma.page_count) { + IVTV_DEBUG_WARN + ("failed to map uv user pages, returned %d " + "expecting %d\n", uv_pages, uv_dma.page_count); + + if (uv_pages >= 0) { + for (i = 0; i < uv_pages; i++) + put_page(dma->map[y_pages + i]); + rc = -EFAULT; + } else { + rc = uv_pages; + } + } else { + IVTV_DEBUG_WARN + ("failed to map y user pages, returned %d " + "expecting %d\n", y_pages, y_dma.page_count); } - dma->page_count = 0; - return -EINVAL; + if (y_pages >= 0) { + for (i = 0; i < y_pages; i++) + put_page(dma->map[i]); + /* + * Inherit the -EFAULT from rc's + * initialization, but allow it to be + * overriden by uv_pages above if it was an + * actual errno. + */ + } else { + rc = y_pages; + } + return rc; } + dma->page_count = y_pages + uv_pages; + /* Fill & map SG List */ if (ivtv_udma_fill_sg_list (dma, &uv_dma, ivtv_udma_fill_sg_list (dma, &y_dma, 0)) < 0) { IVTV_DEBUG_WARN("could not allocate bounce buffers for highmem userspace buffers\n"); diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index e7e717800ee2..b03d74e09a3c 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -8,7 +8,7 @@ * operation (via the mem2mem framework). * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * Pawel Osciak, <p.osciak@samsung.com> + * Pawel Osciak, <pawel@osciak.com> * Marek Szyprowski, <m.szyprowski@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -28,12 +28,12 @@ #include <media/v4l2-mem2mem.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> -#include <media/videobuf-vmalloc.h> +#include <media/videobuf2-vmalloc.h> #define MEM2MEM_TEST_MODULE_NAME "mem2mem-testdev" MODULE_DESCRIPTION("Virtual device for mem2mem framework testing"); -MODULE_AUTHOR("Pawel Osciak, <p.osciak@samsung.com>"); +MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>"); MODULE_LICENSE("GPL"); @@ -201,11 +201,6 @@ struct m2mtest_ctx { struct v4l2_m2m_ctx *m2m_ctx; }; -struct m2mtest_buffer { - /* vb must be first! */ - struct videobuf_buffer vb; -}; - static struct v4l2_queryctrl *get_ctrl(int id) { int i; @@ -219,37 +214,41 @@ static struct v4l2_queryctrl *get_ctrl(int id) } static int device_process(struct m2mtest_ctx *ctx, - struct m2mtest_buffer *in_buf, - struct m2mtest_buffer *out_buf) + struct vb2_buffer *in_vb, + struct vb2_buffer *out_vb) { struct m2mtest_dev *dev = ctx->dev; + struct m2mtest_q_data *q_data; u8 *p_in, *p_out; int x, y, t, w; int tile_w, bytes_left; - struct videobuf_queue *src_q; - struct videobuf_queue *dst_q; + int width, height, bytesperline; - src_q = v4l2_m2m_get_src_vq(ctx->m2m_ctx); - dst_q = v4l2_m2m_get_dst_vq(ctx->m2m_ctx); - p_in = videobuf_queue_to_vaddr(src_q, &in_buf->vb); - p_out = videobuf_queue_to_vaddr(dst_q, &out_buf->vb); + q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT); + + width = q_data->width; + height = q_data->height; + bytesperline = (q_data->width * q_data->fmt->depth) >> 3; + + p_in = vb2_plane_vaddr(in_vb, 0); + p_out = vb2_plane_vaddr(out_vb, 0); if (!p_in || !p_out) { v4l2_err(&dev->v4l2_dev, "Acquiring kernel pointers to buffers failed\n"); return -EFAULT; } - if (in_buf->vb.size > out_buf->vb.size) { + if (vb2_plane_size(in_vb, 0) > vb2_plane_size(out_vb, 0)) { v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n"); return -EINVAL; } - tile_w = (in_buf->vb.width * (q_data[V4L2_M2M_DST].fmt->depth >> 3)) + tile_w = (width * (q_data[V4L2_M2M_DST].fmt->depth >> 3)) / MEM2MEM_NUM_TILES; - bytes_left = in_buf->vb.bytesperline - tile_w * MEM2MEM_NUM_TILES; + bytes_left = bytesperline - tile_w * MEM2MEM_NUM_TILES; w = 0; - for (y = 0; y < in_buf->vb.height; ++y) { + for (y = 0; y < height; ++y) { for (t = 0; t < MEM2MEM_NUM_TILES; ++t) { if (w & 0x1) { for (x = 0; x < tile_w; ++x) @@ -301,6 +300,21 @@ static void job_abort(void *priv) ctx->aborting = 1; } +static void m2mtest_lock(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + struct m2mtest_dev *dev = ctx->dev; + mutex_lock(&dev->dev_mutex); +} + +static void m2mtest_unlock(void *priv) +{ + struct m2mtest_ctx *ctx = priv; + struct m2mtest_dev *dev = ctx->dev; + mutex_unlock(&dev->dev_mutex); +} + + /* device_run() - prepares and starts the device * * This simulates all the immediate preparations required before starting @@ -311,7 +325,7 @@ static void device_run(void *priv) { struct m2mtest_ctx *ctx = priv; struct m2mtest_dev *dev = ctx->dev; - struct m2mtest_buffer *src_buf, *dst_buf; + struct vb2_buffer *src_buf, *dst_buf; src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); @@ -322,12 +336,11 @@ static void device_run(void *priv) schedule_irq(dev, ctx->transtime); } - static void device_isr(unsigned long priv) { struct m2mtest_dev *m2mtest_dev = (struct m2mtest_dev *)priv; struct m2mtest_ctx *curr_ctx; - struct m2mtest_buffer *src_buf, *dst_buf; + struct vb2_buffer *src_vb, *dst_vb; unsigned long flags; curr_ctx = v4l2_m2m_get_curr_priv(m2mtest_dev->m2m_dev); @@ -338,31 +351,26 @@ static void device_isr(unsigned long priv) return; } - src_buf = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); - dst_buf = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(curr_ctx->m2m_ctx); + curr_ctx->num_processed++; + spin_lock_irqsave(&m2mtest_dev->irqlock, flags); + v4l2_m2m_buf_done(src_vb, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_vb, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&m2mtest_dev->irqlock, flags); + if (curr_ctx->num_processed == curr_ctx->translen || curr_ctx->aborting) { dprintk(curr_ctx->dev, "Finishing transaction\n"); curr_ctx->num_processed = 0; - spin_lock_irqsave(&m2mtest_dev->irqlock, flags); - src_buf->vb.state = dst_buf->vb.state = VIDEOBUF_DONE; - wake_up(&src_buf->vb.done); - wake_up(&dst_buf->vb.done); - spin_unlock_irqrestore(&m2mtest_dev->irqlock, flags); v4l2_m2m_job_finish(m2mtest_dev->m2m_dev, curr_ctx->m2m_ctx); } else { - spin_lock_irqsave(&m2mtest_dev->irqlock, flags); - src_buf->vb.state = dst_buf->vb.state = VIDEOBUF_DONE; - wake_up(&src_buf->vb.done); - wake_up(&dst_buf->vb.done); - spin_unlock_irqrestore(&m2mtest_dev->irqlock, flags); device_run(curr_ctx); } } - /* * video ioctls */ @@ -423,7 +431,7 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, static int vidioc_g_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) { - struct videobuf_queue *vq; + struct vb2_queue *vq; struct m2mtest_q_data *q_data; vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); @@ -434,7 +442,7 @@ static int vidioc_g_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) f->fmt.pix.width = q_data->width; f->fmt.pix.height = q_data->height; - f->fmt.pix.field = vq->field; + f->fmt.pix.field = V4L2_FIELD_NONE; f->fmt.pix.pixelformat = q_data->fmt->fourcc; f->fmt.pix.bytesperline = (q_data->width * q_data->fmt->depth) >> 3; f->fmt.pix.sizeimage = q_data->sizeimage; @@ -523,7 +531,7 @@ static int vidioc_try_fmt_vid_out(struct file *file, void *priv, static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) { struct m2mtest_q_data *q_data; - struct videobuf_queue *vq; + struct vb2_queue *vq; vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); if (!vq) @@ -533,7 +541,7 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) if (!q_data) return -EINVAL; - if (videobuf_queue_is_busy(vq)) { + if (vb2_is_busy(vq)) { v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__); return -EBUSY; } @@ -543,7 +551,6 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f) q_data->height = f->fmt.pix.height; q_data->sizeimage = q_data->width * q_data->height * q_data->fmt->depth >> 3; - vq->field = f->fmt.pix.field; dprintk(ctx->dev, "Setting format for type %d, wxh: %dx%d, fmt: %d\n", @@ -733,120 +740,94 @@ static const struct v4l2_ioctl_ops m2mtest_ioctl_ops = { * Queue operations */ -static void m2mtest_buf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct m2mtest_ctx *ctx = vq->priv_data; - - dprintk(ctx->dev, "type: %d, index: %d, state: %d\n", - vq->type, vb->i, vb->state); - - videobuf_vmalloc_free(vb); - vb->state = VIDEOBUF_NEEDS_INIT; -} - -static int m2mtest_buf_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) +static int m2mtest_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) { - struct m2mtest_ctx *ctx = vq->priv_data; + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vq); struct m2mtest_q_data *q_data; + unsigned int size, count = *nbuffers; q_data = get_q_data(vq->type); - *size = q_data->width * q_data->height * q_data->fmt->depth >> 3; - dprintk(ctx->dev, "size:%d, w/h %d/%d, depth: %d\n", - *size, q_data->width, q_data->height, q_data->fmt->depth); + size = q_data->width * q_data->height * q_data->fmt->depth >> 3; - if (0 == *count) - *count = MEM2MEM_DEF_NUM_BUFS; + while (size * count > MEM2MEM_VID_MEM_LIMIT) + (count)--; - while (*size * *count > MEM2MEM_VID_MEM_LIMIT) - (*count)--; + *nplanes = 1; + *nbuffers = count; + sizes[0] = size; - v4l2_info(&ctx->dev->v4l2_dev, - "%d buffers of size %d set up.\n", *count, *size); + /* + * videobuf2-vmalloc allocator is context-less so no need to set + * alloc_ctxs array. + */ + + dprintk(ctx->dev, "get %d buffer(s) of size %d each.\n", count, size); return 0; } -static int m2mtest_buf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, - enum v4l2_field field) +static int m2mtest_buf_prepare(struct vb2_buffer *vb) { - struct m2mtest_ctx *ctx = vq->priv_data; + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); struct m2mtest_q_data *q_data; - int ret; - dprintk(ctx->dev, "type: %d, index: %d, state: %d\n", - vq->type, vb->i, vb->state); + dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type); - q_data = get_q_data(vq->type); + q_data = get_q_data(vb->vb2_queue->type); - if (vb->baddr) { - /* User-provided buffer */ - if (vb->bsize < q_data->sizeimage) { - /* Buffer too small to fit a frame */ - v4l2_err(&ctx->dev->v4l2_dev, - "User-provided buffer too small\n"); - return -EINVAL; - } - } else if (vb->state != VIDEOBUF_NEEDS_INIT - && vb->bsize < q_data->sizeimage) { - /* We provide the buffer, but it's already been initialized - * and is too small */ + if (vb2_plane_size(vb, 0) < q_data->sizeimage) { + dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), (long)q_data->sizeimage); return -EINVAL; } - vb->width = q_data->width; - vb->height = q_data->height; - vb->bytesperline = (q_data->width * q_data->fmt->depth) >> 3; - vb->size = q_data->sizeimage; - vb->field = field; - - if (VIDEOBUF_NEEDS_INIT == vb->state) { - ret = videobuf_iolock(vq, vb, NULL); - if (ret) { - v4l2_err(&ctx->dev->v4l2_dev, - "Iolock failed\n"); - goto fail; - } - } - - vb->state = VIDEOBUF_PREPARED; + vb2_set_plane_payload(vb, 0, q_data->sizeimage); return 0; -fail: - m2mtest_buf_release(vq, vb); - return ret; } -static void m2mtest_buf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void m2mtest_buf_queue(struct vb2_buffer *vb) { - struct m2mtest_ctx *ctx = vq->priv_data; - - v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb); + struct m2mtest_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); } -static struct videobuf_queue_ops m2mtest_qops = { - .buf_setup = m2mtest_buf_setup, - .buf_prepare = m2mtest_buf_prepare, - .buf_queue = m2mtest_buf_queue, - .buf_release = m2mtest_buf_release, +static struct vb2_ops m2mtest_qops = { + .queue_setup = m2mtest_queue_setup, + .buf_prepare = m2mtest_buf_prepare, + .buf_queue = m2mtest_buf_queue, }; -static void queue_init(void *priv, struct videobuf_queue *vq, - enum v4l2_buf_type type) +static int queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq) { struct m2mtest_ctx *ctx = priv; - struct m2mtest_dev *dev = ctx->dev; + int ret; - videobuf_queue_vmalloc_init(vq, &m2mtest_qops, dev->v4l2_dev.dev, - &dev->irqlock, type, V4L2_FIELD_NONE, - sizeof(struct m2mtest_buffer), priv, - &dev->dev_mutex); -} + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + src_vq->ops = &m2mtest_qops; + src_vq->mem_ops = &vb2_vmalloc_memops; + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + dst_vq->ops = &m2mtest_qops; + dst_vq->mem_ops = &vb2_vmalloc_memops; + + return vb2_queue_init(dst_vq); +} /* * File operations @@ -866,7 +847,8 @@ static int m2mtest_open(struct file *file) ctx->transtime = MEM2MEM_DEF_TRANSTIME; ctx->num_processed = 0; - ctx->m2m_ctx = v4l2_m2m_ctx_init(ctx, dev->m2m_dev, queue_init); + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); + if (IS_ERR(ctx->m2m_ctx)) { int ret = PTR_ERR(ctx->m2m_ctx); @@ -932,6 +914,8 @@ static struct v4l2_m2m_ops m2m_ops = { .device_run = device_run, .job_ready = job_ready, .job_abort = job_abort, + .lock = m2mtest_lock, + .unlock = m2mtest_unlock, }; static int m2mtest_probe(struct platform_device *pdev) @@ -990,6 +974,7 @@ static int m2mtest_probe(struct platform_device *pdev) return 0; + v4l2_m2m_release(dev->m2m_dev); err_m2m: video_unregister_device(dev->vfd); rel_vdev: diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 48d2c2419c13..b09a3c80a15e 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -1547,7 +1547,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) return 0; } -static long vidioc_default(struct file *file, void *fh, int cmd, void *arg) +static long vidioc_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) { switch (cmd) { case MEYEIOC_G_PARAMS: diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index f7fc88d240e6..e2bbd8c35c98 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -79,7 +79,7 @@ static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { /* Order important - see above */ {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_GREY8_1X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, }; struct mt9m001 { diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 6a784c87e5ff..e313d8390092 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -95,7 +95,7 @@ static const struct mt9v022_datafmt mt9v022_colour_fmts[] = { static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = { /* Order important - see above */ {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, - {V4L2_MBUS_FMT_GREY8_1X8, V4L2_COLORSPACE_JPEG}, + {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, }; struct mt9v022 { @@ -392,7 +392,7 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, * icd->try_fmt(), datawidth is from our supported format list */ switch (mf->code) { - case V4L2_MBUS_FMT_GREY8_1X8: + case V4L2_MBUS_FMT_Y8_1X8: case V4L2_MBUS_FMT_Y10_1X10: if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATM) return -EINVAL; diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index b9cb4a436959..502e2a40964c 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -21,7 +21,7 @@ #include <media/v4l2-common.h> #include <media/v4l2-dev.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-dma-contig.h> #include <media/soc_camera.h> #include <media/soc_mediabus.h> @@ -62,10 +62,16 @@ #define MAX_VIDEO_MEM 16 +enum csi_buffer_state { + CSI_BUF_NEEDS_INIT, + CSI_BUF_PREPARED, +}; + struct mx3_camera_buffer { /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - enum v4l2_mbus_pixelcode code; + struct vb2_buffer vb; + enum csi_buffer_state state; + struct list_head queue; /* One descriptot per scatterlist (per frame) */ struct dma_async_tx_descriptor *txd; @@ -108,6 +114,9 @@ struct mx3_camera_dev { struct list_head capture; spinlock_t lock; /* Protects video buffer lists */ struct mx3_camera_buffer *active; + struct vb2_alloc_ctx *alloc_ctx; + enum v4l2_field field; + int sequence; /* IDMAC / dmaengine interface */ struct idmac_channel *idmac_channel[1]; /* We need one channel */ @@ -130,6 +139,11 @@ static void csi_reg_write(struct mx3_camera_dev *mx3, u32 value, off_t reg) __raw_writel(value, mx3->base + reg); } +static struct mx3_camera_buffer *to_mx3_vb(struct vb2_buffer *vb) +{ + return container_of(vb, struct mx3_camera_buffer, vb); +} + /* Called from the IPU IDMAC ISR */ static void mx3_cam_dma_done(void *arg) { @@ -137,20 +151,20 @@ static void mx3_cam_dma_done(void *arg) struct dma_chan *chan = desc->txd.chan; struct idmac_channel *ichannel = to_idmac_chan(chan); struct mx3_camera_dev *mx3_cam = ichannel->client; - struct videobuf_buffer *vb; dev_dbg(chan->device->dev, "callback cookie %d, active DMA 0x%08x\n", desc->txd.cookie, mx3_cam->active ? sg_dma_address(&mx3_cam->active->sg) : 0); spin_lock(&mx3_cam->lock); if (mx3_cam->active) { - vb = &mx3_cam->active->vb; - - list_del_init(&vb->queue); - vb->state = VIDEOBUF_DONE; - do_gettimeofday(&vb->ts); - vb->field_count++; - wake_up(&vb->done); + struct vb2_buffer *vb = &mx3_cam->active->vb; + struct mx3_camera_buffer *buf = to_mx3_vb(vb); + + list_del_init(&buf->queue); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.field = mx3_cam->field; + vb->v4l2_buf.sequence = mx3_cam->sequence++; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); } if (list_empty(&mx3_cam->capture)) { @@ -165,50 +179,22 @@ static void mx3_cam_dma_done(void *arg) } mx3_cam->active = list_entry(mx3_cam->capture.next, - struct mx3_camera_buffer, vb.queue); - mx3_cam->active->vb.state = VIDEOBUF_ACTIVE; + struct mx3_camera_buffer, queue); spin_unlock(&mx3_cam->lock); } -static void free_buffer(struct videobuf_queue *vq, struct mx3_camera_buffer *buf) -{ - struct soc_camera_device *icd = vq->priv_data; - struct videobuf_buffer *vb = &buf->vb; - struct dma_async_tx_descriptor *txd = buf->txd; - struct idmac_channel *ichan; - - BUG_ON(in_interrupt()); - - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, - vb, vb->baddr, vb->bsize); - - /* - * This waits until this buffer is out of danger, i.e., until it is no - * longer in STATE_QUEUED or STATE_ACTIVE - */ - videobuf_waiton(vq, vb, 0, 0); - if (txd) { - ichan = to_idmac_chan(txd->chan); - async_tx_ack(txd); - } - videobuf_dma_contig_free(vq, vb); - buf->txd = NULL; - - vb->state = VIDEOBUF_NEEDS_INIT; -} - /* * Videobuf operations */ /* * Calculate the __buffer__ (not data) size and number of buffers. - * Called with .vb_lock held */ -static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) +static int mx3_videobuf_setup(struct vb2_queue *vq, + unsigned int *count, unsigned int *num_planes, + unsigned long sizes[], void *alloc_ctxs[]) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx3_camera_dev *mx3_cam = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, @@ -220,162 +206,133 @@ static int mx3_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, if (!mx3_cam->idmac_channel[0]) return -EINVAL; - *size = bytes_per_line * icd->user_height; + *num_planes = 1; + + mx3_cam->sequence = 0; + sizes[0] = bytes_per_line * icd->user_height; + alloc_ctxs[0] = mx3_cam->alloc_ctx; if (!*count) *count = 32; - if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) - *count = MAX_VIDEO_MEM * 1024 * 1024 / *size; + if (sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024) + *count = MAX_VIDEO_MEM * 1024 * 1024 / sizes[0]; return 0; } -/* Called with .vb_lock held */ -static int mx3_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, enum v4l2_field field) +static int mx3_videobuf_prepare(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx3_camera_dev *mx3_cam = ici->priv; - struct mx3_camera_buffer *buf = - container_of(vb, struct mx3_camera_buffer, vb); + struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; + struct scatterlist *sg; + struct mx3_camera_buffer *buf; size_t new_size; - int ret; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); if (bytes_per_line < 0) return bytes_per_line; - new_size = bytes_per_line * icd->user_height; + buf = to_mx3_vb(vb); + sg = &buf->sg; - /* - * I think, in buf_prepare you only have to protect global data, - * the actual buffer is yours - */ - - if (buf->code != icd->current_fmt->code || - vb->width != icd->user_width || - vb->height != icd->user_height || - vb->field != field) { - buf->code = icd->current_fmt->code; - vb->width = icd->user_width; - vb->height = icd->user_height; - vb->field = field; - if (vb->state != VIDEOBUF_NEEDS_INIT) - free_buffer(vq, buf); - } + new_size = bytes_per_line * icd->user_height; - if (vb->baddr && vb->bsize < new_size) { - /* User provided buffer, but it is too small */ - ret = -ENOMEM; - goto out; + if (vb2_plane_size(vb, 0) < new_size) { + dev_err(icd->dev.parent, "Buffer too small (%lu < %zu)\n", + vb2_plane_size(vb, 0), new_size); + return -ENOBUFS; } - if (vb->state == VIDEOBUF_NEEDS_INIT) { - struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; - struct scatterlist *sg = &buf->sg; - - /* - * The total size of video-buffers that will be allocated / mapped. - * *size that we calculated in videobuf_setup gets assigned to - * vb->bsize, and now we use the same calculation to get vb->size. - */ - vb->size = new_size; - - /* This actually (allocates and) maps buffers */ - ret = videobuf_iolock(vq, vb, NULL); - if (ret) - goto fail; - - /* - * We will have to configure the IDMAC channel. It has two slots - * for DMA buffers, we shall enter the first two buffers there, - * and then submit new buffers in DMA-ready interrupts - */ - sg_init_table(sg, 1); - sg_dma_address(sg) = videobuf_to_dma_contig(vb); - sg_dma_len(sg) = vb->size; + if (buf->state == CSI_BUF_NEEDS_INIT) { + sg_dma_address(sg) = vb2_dma_contig_plane_paddr(vb, 0); + sg_dma_len(sg) = new_size; buf->txd = ichan->dma_chan.device->device_prep_slave_sg( &ichan->dma_chan, sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); - if (!buf->txd) { - ret = -EIO; - goto fail; - } + if (!buf->txd) + return -EIO; buf->txd->callback_param = buf->txd; buf->txd->callback = mx3_cam_dma_done; - vb->state = VIDEOBUF_PREPARED; + buf->state = CSI_BUF_PREPARED; } - return 0; + vb2_set_plane_payload(vb, 0, new_size); -fail: - free_buffer(vq, buf); -out: - return ret; + return 0; } static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc) { /* Add more formats as need arises and test possibilities appear... */ switch (fourcc) { - case V4L2_PIX_FMT_RGB565: - return IPU_PIX_FMT_RGB565; case V4L2_PIX_FMT_RGB24: return IPU_PIX_FMT_RGB24; - case V4L2_PIX_FMT_RGB332: - return IPU_PIX_FMT_RGB332; - case V4L2_PIX_FMT_YUV422P: - return IPU_PIX_FMT_YVU422P; + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_RGB565: default: return IPU_PIX_FMT_GENERIC; } } -/* - * Called with .vb_lock mutex held and - * under spinlock_irqsave(&mx3_cam->lock, ...) - */ -static void mx3_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx3_videobuf_queue(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx3_camera_dev *mx3_cam = ici->priv; - struct mx3_camera_buffer *buf = - container_of(vb, struct mx3_camera_buffer, vb); + struct mx3_camera_buffer *buf = to_mx3_vb(vb); struct dma_async_tx_descriptor *txd = buf->txd; struct idmac_channel *ichan = to_idmac_chan(txd->chan); struct idmac_video_param *video = &ichan->params.video; dma_cookie_t cookie; u32 fourcc = icd->current_fmt->host_fmt->fourcc; - - BUG_ON(!irqs_disabled()); + unsigned long flags; /* This is the configuration of one sg-element */ video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc); - video->out_width = icd->user_width; - video->out_height = icd->user_height; - video->out_stride = icd->user_width; + + if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) { + /* + * If the IPU DMA channel is configured to transport + * generic 8-bit data, we have to set up correctly the + * geometry parameters upon the current pixel format. + * So, since the DMA horizontal parameters are expressed + * in bytes not pixels, convert these in the right unit. + */ + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + BUG_ON(bytes_per_line <= 0); + + video->out_width = bytes_per_line; + video->out_height = icd->user_height; + video->out_stride = bytes_per_line; + } else { + /* + * For IPU known formats the pixel unit will be managed + * successfully by the IPU code + */ + video->out_width = icd->user_width; + video->out_height = icd->user_height; + video->out_stride = icd->user_width; + } #ifdef DEBUG /* helps to see what DMA actually has written */ - memset((void *)vb->baddr, 0xaa, vb->bsize); + if (vb2_plane_vaddr(vb, 0)) + memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0)); #endif - list_add_tail(&vb->queue, &mx3_cam->capture); + spin_lock_irqsave(&mx3_cam->lock, flags); + list_add_tail(&buf->queue, &mx3_cam->capture); - if (!mx3_cam->active) { + if (!mx3_cam->active) mx3_cam->active = buf; - vb->state = VIDEOBUF_ACTIVE; - } else { - vb->state = VIDEOBUF_QUEUED; - } spin_unlock_irq(&mx3_cam->lock); @@ -383,67 +340,87 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq, dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg)); - spin_lock_irq(&mx3_cam->lock); - if (cookie >= 0) return; - /* Submit error */ - vb->state = VIDEOBUF_PREPARED; + spin_lock_irq(&mx3_cam->lock); - list_del_init(&vb->queue); + /* Submit error */ + list_del_init(&buf->queue); if (mx3_cam->active == buf) mx3_cam->active = NULL; + + spin_unlock_irqrestore(&mx3_cam->lock, flags); + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); } -/* Called with .vb_lock held */ -static void mx3_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void mx3_videobuf_release(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx3_camera_dev *mx3_cam = ici->priv; - struct mx3_camera_buffer *buf = - container_of(vb, struct mx3_camera_buffer, vb); + struct mx3_camera_buffer *buf = to_mx3_vb(vb); + struct dma_async_tx_descriptor *txd = buf->txd; unsigned long flags; dev_dbg(icd->dev.parent, - "Release%s DMA 0x%08x (state %d), queue %sempty\n", + "Release%s DMA 0x%08x, queue %sempty\n", mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg), - vb->state, list_empty(&vb->queue) ? "" : "not "); + list_empty(&buf->queue) ? "" : "not "); + spin_lock_irqsave(&mx3_cam->lock, flags); - if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) && - !list_empty(&vb->queue)) { - vb->state = VIDEOBUF_ERROR; - list_del_init(&vb->queue); - if (mx3_cam->active == buf) - mx3_cam->active = NULL; + if (mx3_cam->active == buf) + mx3_cam->active = NULL; + + /* Doesn't hurt also if the list is empty */ + list_del_init(&buf->queue); + buf->state = CSI_BUF_NEEDS_INIT; + + if (txd) { + buf->txd = NULL; + if (mx3_cam->idmac_channel[0]) + async_tx_ack(txd); } + spin_unlock_irqrestore(&mx3_cam->lock, flags); - free_buffer(vq, buf); } -static struct videobuf_queue_ops mx3_videobuf_ops = { - .buf_setup = mx3_videobuf_setup, - .buf_prepare = mx3_videobuf_prepare, - .buf_queue = mx3_videobuf_queue, - .buf_release = mx3_videobuf_release, +static int mx3_videobuf_init(struct vb2_buffer *vb) +{ + struct mx3_camera_buffer *buf = to_mx3_vb(vb); + /* This is for locking debugging only */ + INIT_LIST_HEAD(&buf->queue); + sg_init_table(&buf->sg, 1); + + buf->state = CSI_BUF_NEEDS_INIT; + buf->txd = NULL; + + return 0; +} + +static struct vb2_ops mx3_videobuf_ops = { + .queue_setup = mx3_videobuf_setup, + .buf_prepare = mx3_videobuf_prepare, + .buf_queue = mx3_videobuf_queue, + .buf_cleanup = mx3_videobuf_release, + .buf_init = mx3_videobuf_init, + .wait_prepare = soc_camera_unlock, + .wait_finish = soc_camera_lock, }; -static void mx3_camera_init_videobuf(struct videobuf_queue *q, +static int mx3_camera_init_videobuf(struct vb2_queue *q, struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct mx3_camera_dev *mx3_cam = ici->priv; - - videobuf_queue_dma_contig_init(q, &mx3_videobuf_ops, icd->dev.parent, - &mx3_cam->lock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_NONE, - sizeof(struct mx3_camera_buffer), icd, - &icd->video_lock); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = icd; + q->ops = &mx3_videobuf_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct mx3_camera_buffer); + + return vb2_queue_init(q); } /* First part of ipu_csi_init_interface() */ @@ -538,18 +515,6 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd) icd->devnum); } -static bool channel_change_requested(struct soc_camera_device *icd, - struct v4l2_rect *rect) -{ - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct mx3_camera_dev *mx3_cam = ici->priv; - struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; - - /* Do buffers have to be re-allocated or channel re-configured? */ - return ichan && rect->width * rect->height > - icd->user_width * icd->user_height; -} - static int test_platform_param(struct mx3_camera_dev *mx3_cam, unsigned char buswidth, unsigned long *flags) { @@ -734,18 +699,36 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id if (xlate) { xlate->host_fmt = fmt; xlate->code = code; + dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n", + (fmt->fourcc >> (0*8)) & 0xFF, + (fmt->fourcc >> (1*8)) & 0xFF, + (fmt->fourcc >> (2*8)) & 0xFF, + (fmt->fourcc >> (3*8)) & 0xFF); xlate++; - dev_dbg(dev, "Providing format %x in pass-through mode\n", - xlate->host_fmt->fourcc); } return formats; } static void configure_geometry(struct mx3_camera_dev *mx3_cam, - unsigned int width, unsigned int height) + unsigned int width, unsigned int height, + enum v4l2_mbus_pixelcode code) { u32 ctrl, width_field, height_field; + const struct soc_mbus_pixelfmt *fmt; + + fmt = soc_mbus_get_fmtdesc(code); + BUG_ON(!fmt); + + if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) { + /* + * As the CSI will be configured to output BAYER, here + * the width parameter count the number of samples to + * capture to complete the whole image width. + */ + width *= soc_mbus_samples_per_pixel(fmt); + BUG_ON(width < 0); + } /* Setup frame size - this cannot be changed on-the-fly... */ width_field = width - 1; @@ -772,18 +755,6 @@ static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam) struct dma_chan_request rq = {.mx3_cam = mx3_cam, .id = IDMAC_IC_7}; - if (*ichan) { - struct videobuf_buffer *vb, *_vb; - dma_release_channel(&(*ichan)->dma_chan); - *ichan = NULL; - mx3_cam->active = NULL; - list_for_each_entry_safe(vb, _vb, &mx3_cam->capture, queue) { - list_del_init(&vb->queue); - vb->state = VIDEOBUF_ERROR; - wake_up(&vb->done); - } - } - dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); dma_cap_set(DMA_PRIVATE, mask); @@ -843,19 +814,8 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, return ret; } - if (mf.width != icd->user_width || mf.height != icd->user_height) { - /* - * We now know pixel formats and can decide upon DMA-channel(s) - * So far only direct camera-to-memory is supported - */ - if (channel_change_requested(icd, rect)) { - ret = acquire_dma_channel(mx3_cam); - if (ret < 0) - return ret; - } - - configure_geometry(mx3_cam, mf.width, mf.height); - } + if (mf.width != icd->user_width || mf.height != icd->user_height) + configure_geometry(mx3_cam, mf.width, mf.height, mf.code); dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", mf.width, mf.height); @@ -887,17 +847,13 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, stride_align(&pix->width); dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height); - ret = acquire_dma_channel(mx3_cam); - if (ret < 0) - return ret; - /* * Might have to perform a complete interface initialisation like in * ipu_csi_init_interface() in mxc_v4l2_s_param(). Also consider * mxc_v4l2_s_fmt() */ - configure_geometry(mx3_cam, pix->width, pix->height); + configure_geometry(mx3_cam, pix->width, pix->height, xlate->code); mf.width = pix->width; mf.height = pix->height; @@ -912,12 +868,25 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, if (mf.code != xlate->code) return -EINVAL; + if (!mx3_cam->idmac_channel[0]) { + ret = acquire_dma_channel(mx3_cam); + if (ret < 0) + return ret; + } + pix->width = mf.width; pix->height = mf.height; pix->field = mf.field; + mx3_cam->field = mf.field; pix->colorspace = mf.colorspace; icd->current_fmt = xlate; + pix->bytesperline = soc_mbus_bytes_per_line(pix->width, + xlate->host_fmt); + if (pix->bytesperline < 0) + return pix->bytesperline; + pix->sizeimage = pix->height * pix->bytesperline; + dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height); return ret; @@ -991,7 +960,7 @@ static unsigned int mx3_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; - return videobuf_poll_stream(file, &icd->vb_vidq, pt); + return vb2_poll(&icd->vb2_vidq, file, pt); } static int mx3_camera_querycap(struct soc_camera_host *ici, @@ -1165,7 +1134,7 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = { .set_fmt = mx3_camera_set_fmt, .try_fmt = mx3_camera_try_fmt, .get_formats = mx3_camera_get_formats, - .init_videobuf = mx3_camera_init_videobuf, + .init_videobuf2 = mx3_camera_init_videobuf, .reqbufs = mx3_camera_reqbufs, .poll = mx3_camera_poll, .querycap = mx3_camera_querycap, @@ -1241,6 +1210,12 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev) soc_host->v4l2_dev.dev = &pdev->dev; soc_host->nr = pdev->id; + mx3_cam->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(mx3_cam->alloc_ctx)) { + err = PTR_ERR(mx3_cam->alloc_ctx); + goto eallocctx; + } + err = soc_camera_host_register(soc_host); if (err) goto ecamhostreg; @@ -1251,6 +1226,8 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev) return 0; ecamhostreg: + vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx); +eallocctx: iounmap(base); eioremap: clk_put(mx3_cam->clk); @@ -1280,6 +1257,8 @@ static int __devexit mx3_camera_remove(struct platform_device *pdev) if (WARN_ON(mx3_cam->idmac_channel[0])) dma_release_channel(&mx3_cam->idmac_channel[0]->dma_chan); + vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx); + vfree(mx3_cam); dmaengine_put(); diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index e8846a09b026..0b3850023505 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -643,7 +643,8 @@ static int vidioc_s_register(struct file *file, void *fh, struct v4l2_dbg_regist } #endif -static long vidioc_default(struct file *file, void *fh, int cmd, void *arg) +static long vidioc_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) { struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; struct mxb *mxb = (struct mxb *)dev->ext_priv; diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c new file mode 100644 index 000000000000..35f722a88f76 --- /dev/null +++ b/drivers/media/video/noon010pc30.c @@ -0,0 +1,792 @@ +/* + * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP + * + * Copyright (C) 2010 Samsung Electronics + * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> + * + * Initial register configuration based on a driver authored by + * HeungJun Kim <riverful.kim@samsung.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later vergsion. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <media/noon010pc30.h> +#include <media/v4l2-chip-ident.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-subdev.h> + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); + +#define MODULE_NAME "NOON010PC30" + +/* + * Register offsets within a page + * b15..b8 - page id, b7..b0 - register address + */ +#define POWER_CTRL_REG 0x0001 +#define PAGEMODE_REG 0x03 +#define DEVICE_ID_REG 0x0004 +#define NOON010PC30_ID 0x86 +#define VDO_CTL_REG(n) (0x0010 + (n)) +#define SYNC_CTL_REG 0x0012 +/* Window size and position */ +#define WIN_ROWH_REG 0x0013 +#define WIN_ROWL_REG 0x0014 +#define WIN_COLH_REG 0x0015 +#define WIN_COLL_REG 0x0016 +#define WIN_HEIGHTH_REG 0x0017 +#define WIN_HEIGHTL_REG 0x0018 +#define WIN_WIDTHH_REG 0x0019 +#define WIN_WIDTHL_REG 0x001A +#define HBLANKH_REG 0x001B +#define HBLANKL_REG 0x001C +#define VSYNCH_REG 0x001D +#define VSYNCL_REG 0x001E +/* VSYNC control */ +#define VS_CTL_REG(n) (0x00A1 + (n)) +/* page 1 */ +#define ISP_CTL_REG(n) (0x0110 + (n)) +#define YOFS_REG 0x0119 +#define DARK_YOFS_REG 0x011A +#define SAT_CTL_REG 0x0120 +#define BSAT_REG 0x0121 +#define RSAT_REG 0x0122 +/* Color correction */ +#define CMC_CTL_REG 0x0130 +#define CMC_OFSGH_REG 0x0133 +#define CMC_OFSGL_REG 0x0135 +#define CMC_SIGN_REG 0x0136 +#define CMC_GOFS_REG 0x0137 +#define CMC_COEF_REG(n) (0x0138 + (n)) +#define CMC_OFS_REG(n) (0x0141 + (n)) +/* Gamma correction */ +#define GMA_CTL_REG 0x0160 +#define GMA_COEF_REG(n) (0x0161 + (n)) +/* Lens Shading */ +#define LENS_CTRL_REG 0x01D0 +#define LENS_XCEN_REG 0x01D1 +#define LENS_YCEN_REG 0x01D2 +#define LENS_RC_REG 0x01D3 +#define LENS_GC_REG 0x01D4 +#define LENS_BC_REG 0x01D5 +#define L_AGON_REG 0x01D6 +#define L_AGOFF_REG 0x01D7 +/* Page 3 - Auto Exposure */ +#define AE_CTL_REG(n) (0x0310 + (n)) +#define AE_CTL9_REG 0x032C +#define AE_CTL10_REG 0x032D +#define AE_YLVL_REG 0x031C +#define AE_YTH_REG(n) (0x031D + (n)) +#define AE_WGT_REG 0x0326 +#define EXP_TIMEH_REG 0x0333 +#define EXP_TIMEM_REG 0x0334 +#define EXP_TIMEL_REG 0x0335 +#define EXP_MMINH_REG 0x0336 +#define EXP_MMINL_REG 0x0337 +#define EXP_MMAXH_REG 0x0338 +#define EXP_MMAXM_REG 0x0339 +#define EXP_MMAXL_REG 0x033A +/* Page 4 - Auto White Balance */ +#define AWB_CTL_REG(n) (0x0410 + (n)) +#define AWB_ENABE 0x80 +#define AWB_WGHT_REG 0x0419 +#define BGAIN_PAR_REG(n) (0x044F + (n)) +/* Manual white balance, when AWB_CTL2[0]=1 */ +#define MWB_RGAIN_REG 0x0466 +#define MWB_BGAIN_REG 0x0467 + +/* The token to mark an array end */ +#define REG_TERM 0xFFFF + +struct noon010_format { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; + u16 ispctl1_reg; +}; + +struct noon010_frmsize { + u16 width; + u16 height; + int vid_ctl1; +}; + +static const char * const noon010_supply_name[] = { + "vdd_core", "vddio", "vdda" +}; + +#define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) + +struct noon010_info { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + const struct noon010pc30_platform_data *pdata; + const struct noon010_format *curr_fmt; + const struct noon010_frmsize *curr_win; + unsigned int hflip:1; + unsigned int vflip:1; + unsigned int power:1; + u8 i2c_reg_page; + struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; + u32 gpio_nreset; + u32 gpio_nstby; +}; + +struct i2c_regval { + u16 addr; + u16 val; +}; + +/* Supported resolutions. */ +static const struct noon010_frmsize noon010_sizes[] = { + { + .width = 352, + .height = 288, + .vid_ctl1 = 0, + }, { + .width = 176, + .height = 144, + .vid_ctl1 = 0x10, + }, { + .width = 88, + .height = 72, + .vid_ctl1 = 0x20, + }, +}; + +/* Supported pixel formats. */ +static const struct noon010_format noon010_formats[] = { + { + .code = V4L2_MBUS_FMT_YUYV8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x03, + }, { + .code = V4L2_MBUS_FMT_YVYU8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x02, + }, { + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0, + }, { + .code = V4L2_MBUS_FMT_UYVY8_2X8, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x01, + }, { + .code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .colorspace = V4L2_COLORSPACE_JPEG, + .ispctl1_reg = 0x40, + }, +}; + +static const struct i2c_regval noon010_base_regs[] = { + { WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C }, + /* Color corection and saturation */ + { ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 }, + { YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 }, + { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, + { CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C }, + { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F }, + { CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 }, + { CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 }, + { CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 }, + { CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B }, + { CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 }, + { CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 }, + { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C }, + { CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 }, + { CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 }, + /* Automatic white balance */ + { AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E }, + { AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 }, + /* Auto exposure */ + { AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 }, + { AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 }, + { AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 }, + { AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E }, + { AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 }, + { AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 }, + { AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 }, + /* Lens shading compensation */ + { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, + { LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 }, + { LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E }, + { REG_TERM, 0 }, +}; + +static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) +{ + return container_of(sd, struct noon010_info, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; +} + +static inline int set_i2c_page(struct noon010_info *info, + struct i2c_client *client, unsigned int reg) +{ + u32 page = reg >> 8 & 0xFF; + int ret = 0; + + if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { + ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); + if (!ret) + info->i2c_reg_page = page; + } + return ret; +} + +static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); +} + +static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct noon010_info *info = to_noon010(sd); + int ret = set_i2c_page(info, client, reg_addr); + + if (ret) + return ret; + return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); +} + +static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, + const struct i2c_regval *msg) +{ + while (msg->addr != REG_TERM) { + int ret = cam_i2c_write(sd, msg->addr, msg->val); + + if (ret) + return ret; + msg++; + } + return 0; +} + +/* Device reset and sleep mode control */ +static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) +{ + struct noon010_info *info = to_noon010(sd); + u8 reg = sleep ? 0xF1 : 0xF0; + int ret = 0; + + if (reset) + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); + if (!ret) { + ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); + if (reset && !ret) + info->i2c_reg_page = -1; + } + return ret; +} + +/* Automatic white balance control */ +static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) +{ + int ret; + + ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); + if (!ret) + ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); + return ret; +} + +static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) +{ + struct noon010_info *info = to_noon010(sd); + int reg, ret; + + reg = cam_i2c_read(sd, VDO_CTL_REG(1)); + if (reg < 0) + return reg; + + reg &= 0x7C; + if (hflip) + reg |= 0x01; + if (vflip) + reg |= 0x02; + + ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); + if (!ret) { + info->hflip = hflip; + info->vflip = vflip; + } + return ret; +} + +/* Configure resolution and color format */ +static int noon010_set_params(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + int ret; + + if (!info->curr_win) + return -EINVAL; + + ret = cam_i2c_write(sd, VDO_CTL_REG(0), info->curr_win->vid_ctl1); + + if (!ret && info->curr_fmt) + ret = cam_i2c_write(sd, ISP_CTL_REG(0), + info->curr_fmt->ispctl1_reg); + return ret; +} + +/* Find nearest matching image pixel size. */ +static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf) +{ + unsigned int min_err = ~0; + int i = ARRAY_SIZE(noon010_sizes); + const struct noon010_frmsize *fsize = &noon010_sizes[0], + *match = NULL; + + while (i--) { + int err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + return 0; + } + return -EINVAL; +} + +static int power_enable(struct noon010_info *info) +{ + int ret; + + if (info->power) { + v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); + return 0; + } + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nreset)) { + msleep(50); + gpio_set_value(info->gpio_nreset, 1); + } + if (gpio_is_valid(info->gpio_nstby)) { + udelay(1000); + gpio_set_value(info->gpio_nstby, 1); + } + if (gpio_is_valid(info->gpio_nreset)) { + udelay(1000); + gpio_set_value(info->gpio_nreset, 0); + msleep(100); + gpio_set_value(info->gpio_nreset, 1); + msleep(20); + } + info->power = 1; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__); + return 0; +} + +static int power_disable(struct noon010_info *info) +{ + int ret; + + if (!info->power) { + v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); + return 0; + } + + ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); + if (ret) + return ret; + + if (gpio_is_valid(info->gpio_nstby)) + gpio_set_value(info->gpio_nstby, 0); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_set_value(info->gpio_nreset, 0); + + info->power = 0; + + v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__); + + return 0; +} + +static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + + v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", + __func__, ctrl->id, ctrl->val); + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + return noon010_enable_autowhitebalance(sd, ctrl->val); + case V4L2_CID_BLUE_BALANCE: + return cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); + case V4L2_CID_RED_BALANCE: + return cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); + default: + return -EINVAL; + } +} + +static int noon010_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (!code || index >= ARRAY_SIZE(noon010_formats)) + return -EINVAL; + + *code = noon010_formats[index].code; + return 0; +} + +static int noon010_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) +{ + struct noon010_info *info = to_noon010(sd); + int ret; + + if (!mf) + return -EINVAL; + + if (!info->curr_win || !info->curr_fmt) { + ret = noon010_set_params(sd); + if (ret) + return ret; + } + + mf->width = info->curr_win->width; + mf->height = info->curr_win->height; + mf->code = info->curr_fmt->code; + mf->colorspace = info->curr_fmt->colorspace; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +/* Return nearest media bus frame format. */ +static const struct noon010_format *try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + int i = ARRAY_SIZE(noon010_formats); + + noon010_try_frame_size(mf); + + while (i--) + if (mf->code == noon010_formats[i].code) + break; + + mf->code = noon010_formats[i].code; + + return &noon010_formats[i]; +} + +static int noon010_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + if (!sd || !mf) + return -EINVAL; + + try_fmt(sd, mf); + return 0; +} + +static int noon010_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct noon010_info *info = to_noon010(sd); + + if (!sd || !mf) + return -EINVAL; + + info->curr_fmt = try_fmt(sd, mf); + + return noon010_set_params(sd); +} + +static int noon010_base_config(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + int ret; + + ret = noon010_bulk_write_reg(sd, noon010_base_regs); + if (!ret) { + info->curr_fmt = &noon010_formats[0]; + info->curr_win = &noon010_sizes[0]; + ret = noon010_set_params(sd); + } + if (!ret) + ret = noon010_set_flip(sd, 1, 0); + if (!ret) + ret = noon010_power_ctrl(sd, false, false); + + /* sync the handler and the registers state */ + v4l2_ctrl_handler_setup(&to_noon010(sd)->hdl); + return ret; +} + +static int noon010_s_power(struct v4l2_subdev *sd, int on) +{ + struct noon010_info *info = to_noon010(sd); + const struct noon010pc30_platform_data *pdata = info->pdata; + int ret = 0; + + if (WARN(pdata == NULL, "No platform data!\n")) + return -ENOMEM; + + if (on) { + ret = power_enable(info); + if (ret) + return ret; + ret = noon010_base_config(sd); + } else { + noon010_power_ctrl(sd, false, true); + ret = power_disable(info); + info->curr_win = NULL; + info->curr_fmt = NULL; + } + + return ret; +} + +static int noon010_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return v4l2_chip_ident_i2c_client(client, chip, + V4L2_IDENT_NOON010PC30, 0); +} + +static int noon010_log_status(struct v4l2_subdev *sd) +{ + struct noon010_info *info = to_noon010(sd); + + v4l2_ctrl_handler_log_status(&info->hdl, sd->name); + return 0; +} + +static const struct v4l2_ctrl_ops noon010_ctrl_ops = { + .s_ctrl = noon010_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops noon010_core_ops = { + .g_chip_ident = noon010_g_chip_ident, + .s_power = noon010_s_power, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .log_status = noon010_log_status, +}; + +static const struct v4l2_subdev_video_ops noon010_video_ops = { + .g_mbus_fmt = noon010_g_fmt, + .s_mbus_fmt = noon010_s_fmt, + .try_mbus_fmt = noon010_try_fmt, + .enum_mbus_fmt = noon010_enum_fmt, +}; + +static const struct v4l2_subdev_ops noon010_ops = { + .core = &noon010_core_ops, + .video = &noon010_video_ops, +}; + +/* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ +static int noon010_detect(struct i2c_client *client, struct noon010_info *info) +{ + int ret; + + ret = power_enable(info); + if (ret) + return ret; + + ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); + if (ret < 0) + dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); + + power_disable(info); + + return ret == NOON010PC30_ID ? 0 : -ENODEV; +} + +static int noon010_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct noon010_info *info; + struct v4l2_subdev *sd; + const struct noon010pc30_platform_data *pdata + = client->dev.platform_data; + int ret; + int i; + + if (!pdata) { + dev_err(&client->dev, "No platform data!\n"); + return -EIO; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + sd = &info->sd; + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + v4l2_i2c_subdev_init(sd, client, &noon010_ops); + + v4l2_ctrl_handler_init(&info->hdl, 3); + + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 127, 1, 64); + v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); + + sd->ctrl_handler = &info->hdl; + + ret = info->hdl.error; + if (ret) + goto np_err; + + info->pdata = client->dev.platform_data; + info->i2c_reg_page = -1; + info->gpio_nreset = -EINVAL; + info->gpio_nstby = -EINVAL; + + if (gpio_is_valid(pdata->gpio_nreset)) { + ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_err; + } + info->gpio_nreset = pdata->gpio_nreset; + gpio_direction_output(info->gpio_nreset, 0); + gpio_export(info->gpio_nreset, 0); + } + + if (gpio_is_valid(pdata->gpio_nstby)) { + ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY"); + if (ret) { + dev_err(&client->dev, "GPIO request error: %d\n", ret); + goto np_gpio_err; + } + info->gpio_nstby = pdata->gpio_nstby; + gpio_direction_output(info->gpio_nstby, 0); + gpio_export(info->gpio_nstby, 0); + } + + for (i = 0; i < NOON010_NUM_SUPPLIES; i++) + info->supply[i].supply = noon010_supply_name[i]; + + ret = regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, + info->supply); + if (ret) + goto np_reg_err; + + ret = noon010_detect(client, info); + if (!ret) + return 0; + + /* the sensor detection failed */ + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); +np_reg_err: + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); +np_gpio_err: + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); +np_err: + v4l2_ctrl_handler_free(&info->hdl); + v4l2_device_unregister_subdev(sd); + kfree(info); + return ret; +} + +static int noon010_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct noon010_info *info = to_noon010(sd); + + v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&info->hdl); + + regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply); + + if (gpio_is_valid(info->gpio_nreset)) + gpio_free(info->gpio_nreset); + + if (gpio_is_valid(info->gpio_nstby)) + gpio_free(info->gpio_nstby); + + kfree(info); + return 0; +} + +static const struct i2c_device_id noon010_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, noon010_id); + + +static struct i2c_driver noon010_i2c_driver = { + .driver = { + .name = MODULE_NAME + }, + .probe = noon010_probe, + .remove = noon010_remove, + .id_table = noon010_id, +}; + +static int __init noon010_init(void) +{ + return i2c_add_driver(&noon010_i2c_driver); +} + +static void __exit noon010_exit(void) +{ + i2c_del_driver(&noon010_i2c_driver); +} + +module_init(noon010_init); +module_exit(noon010_exit); + +MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); +MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index 0a2fb2bfdbfb..eab31cbd68eb 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -811,8 +811,8 @@ static irqreturn_t cam_isr(int irq, void *data) spin_lock_irqsave(&pcdev->lock, flags); if (WARN_ON(!buf)) { - dev_warn(dev, "%s: unhandled camera interrupt, status == " - "%#x\n", __func__, it_status); + dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n", + __func__, it_status); suspend_capture(pcdev); disable_capture(pcdev); goto out; @@ -1088,15 +1088,15 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, xlate->host_fmt = &omap1_cam_formats[code]; xlate->code = code; xlate++; - dev_dbg(dev, "%s: providing format %s " - "as byte swapped code #%d\n", __func__, - omap1_cam_formats[code].name, code); + dev_dbg(dev, + "%s: providing format %s as byte swapped code #%d\n", + __func__, omap1_cam_formats[code].name, code); } default: if (xlate) - dev_dbg(dev, "%s: providing format %s " - "in pass-through mode\n", __func__, - fmt->name); + dev_dbg(dev, + "%s: providing format %s in pass-through mode\n", + __func__, fmt->name); } formats++; if (xlate) { @@ -1139,29 +1139,29 @@ static int dma_align(int *width, int *height, return 1; } -#define subdev_call_with_sense(pcdev, dev, icd, sd, function, args...) \ -({ \ - struct soc_camera_sense sense = { \ - .master_clock = pcdev->camexclk, \ - .pixel_clock_max = 0, \ - }; \ - int __ret; \ - \ - if (pcdev->pdata) \ - sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000; \ - icd->sense = &sense; \ - __ret = v4l2_subdev_call(sd, video, function, ##args); \ - icd->sense = NULL; \ - \ - if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { \ - if (sense.pixel_clock > sense.pixel_clock_max) { \ - dev_err(dev, "%s: pixel clock %lu " \ - "set by the camera too high!\n", \ - __func__, sense.pixel_clock); \ - __ret = -EINVAL; \ - } \ - } \ - __ret; \ +#define subdev_call_with_sense(pcdev, dev, icd, sd, function, args...) \ +({ \ + struct soc_camera_sense sense = { \ + .master_clock = pcdev->camexclk, \ + .pixel_clock_max = 0, \ + }; \ + int __ret; \ + \ + if (pcdev->pdata) \ + sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000; \ + icd->sense = &sense; \ + __ret = v4l2_subdev_call(sd, video, function, ##args); \ + icd->sense = NULL; \ + \ + if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { \ + if (sense.pixel_clock > sense.pixel_clock_max) { \ + dev_err(dev, \ + "%s: pixel clock %lu set by the camera too high!\n", \ + __func__, sense.pixel_clock); \ + __ret = -EINVAL; \ + } \ + } \ + __ret; \ }) static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev, @@ -1664,10 +1664,10 @@ static int __exit omap1_cam_remove(struct platform_device *pdev) res = pcdev->res; release_mem_region(res->start, resource_size(res)); - kfree(pcdev); - clk_put(pcdev->clk); + kfree(pcdev); + dev_info(&pdev->dev, "OMAP1 Camera Interface driver unloaded\n"); return 0; diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index 017552762902..f6626e87dbc5 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c @@ -36,6 +36,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/sched.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> diff --git a/drivers/media/video/omap3isp/Makefile b/drivers/media/video/omap3isp/Makefile new file mode 100644 index 000000000000..b1b344774ae7 --- /dev/null +++ b/drivers/media/video/omap3isp/Makefile @@ -0,0 +1,13 @@ +# Makefile for OMAP3 ISP driver + +ifdef CONFIG_VIDEO_OMAP3_DEBUG +EXTRA_CFLAGS += -DDEBUG +endif + +omap3-isp-objs += \ + isp.o ispqueue.o ispvideo.o \ + ispcsiphy.o ispccp2.o ispcsi2.o \ + ispccdc.o isppreview.o ispresizer.o \ + ispstat.o isph3a_aewb.o isph3a_af.o isphist.o + +obj-$(CONFIG_VIDEO_OMAP3) += omap3-isp.o diff --git a/drivers/media/video/omap3isp/cfa_coef_table.h b/drivers/media/video/omap3isp/cfa_coef_table.h new file mode 100644 index 000000000000..c60df0ed075a --- /dev/null +++ b/drivers/media/video/omap3isp/cfa_coef_table.h @@ -0,0 +1,61 @@ +/* + * cfa_coef_table.h + * + * TI OMAP3 ISP - CFA coefficients table + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, +247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, +244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, +247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, +244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, +247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, + 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, + 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, + 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, + 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, + 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, + 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, + 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, + 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, + 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, + 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, + 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, + 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, + 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, + 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, + 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, + 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, + 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, + 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, +244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, +250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, +244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, +250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, +244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, +248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, +250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 diff --git a/drivers/media/video/omap3isp/gamma_table.h b/drivers/media/video/omap3isp/gamma_table.h new file mode 100644 index 000000000000..78deebf7d965 --- /dev/null +++ b/drivers/media/video/omap3isp/gamma_table.h @@ -0,0 +1,90 @@ +/* + * gamma_table.h + * + * TI OMAP3 ISP - Default gamma table for all components + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + 0, 0, 1, 2, 3, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, + 22, 23, 25, 26, 28, 29, 31, 32, 34, 35, 36, 37, 39, 40, 41, 42, + 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 52, 53, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 63, 64, 65, 66, 66, 67, 68, 69, 69, 70, + 71, 72, 72, 73, 74, 75, 75, 76, 77, 78, 78, 79, 80, 81, 81, 82, + 83, 84, 84, 85, 86, 87, 88, 88, 89, 90, 91, 91, 92, 93, 94, 94, + 95, 96, 97, 97, 98, 98, 99, 99, 100, 100, 101, 101, 102, 103, 104, 104, +105, 106, 107, 108, 108, 109, 110, 111, 111, 112, 113, 114, 114, 115, 116, 117, +117, 118, 119, 119, 120, 120, 121, 121, 122, 122, 123, 123, 124, 124, 125, 125, +126, 126, 127, 127, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, 133, 133, +134, 134, 135, 135, 136, 136, 137, 137, 138, 138, 139, 139, 140, 140, 141, 141, +142, 142, 143, 143, 144, 144, 145, 145, 146, 146, 147, 147, 148, 148, 149, 149, +150, 150, 151, 151, 152, 152, 153, 153, 153, 153, 154, 154, 154, 154, 155, 155, +156, 156, 157, 157, 158, 158, 158, 159, 159, 159, 160, 160, 160, 161, 161, 162, +162, 163, 163, 164, 164, 164, 164, 165, 165, 165, 165, 166, 166, 167, 167, 168, +168, 169, 169, 170, 170, 170, 170, 171, 171, 171, 171, 172, 172, 173, 173, 174, +174, 175, 175, 176, 176, 176, 176, 177, 177, 177, 177, 178, 178, 178, 178, 179, +179, 179, 179, 180, 180, 180, 180, 181, 181, 181, 181, 182, 182, 182, 182, 183, +183, 183, 183, 184, 184, 184, 184, 185, 185, 185, 185, 186, 186, 186, 186, 187, +187, 187, 187, 188, 188, 188, 188, 189, 189, 189, 189, 190, 190, 190, 190, 191, +191, 191, 191, 192, 192, 192, 192, 193, 193, 193, 193, 194, 194, 194, 194, 195, +195, 195, 195, 196, 196, 196, 196, 197, 197, 197, 197, 198, 198, 198, 198, 199, +199, 199, 199, 200, 200, 200, 200, 201, 201, 201, 201, 202, 202, 202, 203, 203, +203, 203, 204, 204, 204, 204, 205, 205, 205, 205, 206, 206, 206, 206, 207, 207, +207, 207, 208, 208, 208, 208, 209, 209, 209, 209, 210, 210, 210, 210, 210, 210, +210, 210, 210, 210, 210, 210, 211, 211, 211, 211, 211, 211, 211, 211, 211, 211, +211, 212, 212, 212, 212, 213, 213, 213, 213, 213, 213, 213, 213, 213, 213, 213, +213, 214, 214, 214, 214, 215, 215, 215, 215, 215, 215, 215, 215, 215, 215, 215, +216, 216, 216, 216, 217, 217, 217, 217, 218, 218, 218, 218, 219, 219, 219, 219, +219, 219, 219, 219, 219, 219, 219, 219, 220, 220, 220, 220, 221, 221, 221, 221, +221, 221, 221, 221, 221, 221, 221, 222, 222, 222, 222, 223, 223, 223, 223, 223, +223, 223, 223, 223, 223, 223, 223, 224, 224, 224, 224, 225, 225, 225, 225, 225, +225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, 226, 226, +226, 226, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 227, 228, 228, +228, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 229, 230, 230, 230, +230, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 231, 232, 232, 232, +232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, +233, 233, 233, 233, 234, 234, 234, 234, 234, 234, 234, 234, 234, 234, 234, 235, +235, 235, 235, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, +236, 236, 236, 236, 236, 236, 237, 237, 237, 237, 238, 238, 238, 238, 238, 238, +238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, 238, +238, 238, 238, 238, 238, 239, 239, 239, 239, 240, 240, 240, 240, 240, 240, 240, +240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, 240, +240, 240, 240, 240, 241, 241, 241, 241, 242, 242, 242, 242, 242, 242, 242, 242, +242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, 242, +242, 242, 243, 243, 243, 243, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, +244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, 244, +244, 245, 245, 245, 245, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, +246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, +246, 246, 246, 246, 246, 246, 246, 247, 247, 247, 247, 248, 248, 248, 248, 248, +248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, +248, 248, 248, 248, 248, 248, 249, 249, 249, 249, 250, 250, 250, 250, 250, 250, +250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, +250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, 250, +250, 250, 250, 250, 251, 251, 251, 251, 252, 252, 252, 252, 252, 252, 252, 252, +252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, +252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, +252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252, +252, 252, 252, 252, 252, 252, 252, 252, 253, 253, 253, 253, 253, 253, 253, 253, +253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, +253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, +253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, 253, +253, 254, 254, 254, 254, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, +255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c new file mode 100644 index 000000000000..1a9963bd6d40 --- /dev/null +++ b/drivers/media/video/omap3isp/isp.c @@ -0,0 +1,2220 @@ +/* + * isp.c + * + * TI OMAP3 ISP - Core + * + * Copyright (C) 2006-2010 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * Contributors: + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * David Cohen <dacohen@gmail.com> + * Stanimir Varbanov <svarbanov@mm-sol.com> + * Vimarsh Zutshi <vimarsh.zutshi@gmail.com> + * Tuukka Toivonen <tuukkat76@gmail.com> + * Sergio Aguirre <saaguirre@ti.com> + * Antti Koskipaa <akoskipa@gmail.com> + * Ivan T. Ivanov <iivanov@mm-sol.com> + * RaniSuneela <r-m@ti.com> + * Atanas Filipov <afilipov@mm-sol.com> + * Gjorgji Rosikopulos <grosikopulos@mm-sol.com> + * Hiroshi DOYU <hiroshi.doyu@nokia.com> + * Nayden Kanchev <nkanchev@mm-sol.com> + * Phil Carmody <ext-phil.2.carmody@nokia.com> + * Artem Bityutskiy <artem.bityutskiy@nokia.com> + * Dominic Curran <dcurran@ti.com> + * Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> + * Pallavi Kulkarni <p-kulkarni@ti.com> + * Vaibhav Hiremath <hvaibhav@ti.com> + * Mohit Jalori <mjalori@ti.com> + * Sameer Venkatraman <sameerv@ti.com> + * Senthilvadivu Guruswamy <svadivu@ti.com> + * Thara Gopinath <thara@ti.com> + * Toni Leinonen <toni.leinonen@nokia.com> + * Troy Laramy <t-laramy@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <asm/cacheflush.h> + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/vmalloc.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispccdc.h" +#include "isppreview.h" +#include "ispresizer.h" +#include "ispcsi2.h" +#include "ispccp2.h" +#include "isph3a.h" +#include "isphist.h" + +static unsigned int autoidle; +module_param(autoidle, int, 0444); +MODULE_PARM_DESC(autoidle, "Enable OMAP3ISP AUTOIDLE support"); + +static void isp_save_ctx(struct isp_device *isp); + +static void isp_restore_ctx(struct isp_device *isp); + +static const struct isp_res_mapping isp_res_maps[] = { + { + .isp_rev = ISP_REVISION_2_0, + .map = 1 << OMAP3_ISP_IOMEM_MAIN | + 1 << OMAP3_ISP_IOMEM_CCP2 | + 1 << OMAP3_ISP_IOMEM_CCDC | + 1 << OMAP3_ISP_IOMEM_HIST | + 1 << OMAP3_ISP_IOMEM_H3A | + 1 << OMAP3_ISP_IOMEM_PREV | + 1 << OMAP3_ISP_IOMEM_RESZ | + 1 << OMAP3_ISP_IOMEM_SBL | + 1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 | + 1 << OMAP3_ISP_IOMEM_CSIPHY2, + }, + { + .isp_rev = ISP_REVISION_15_0, + .map = 1 << OMAP3_ISP_IOMEM_MAIN | + 1 << OMAP3_ISP_IOMEM_CCP2 | + 1 << OMAP3_ISP_IOMEM_CCDC | + 1 << OMAP3_ISP_IOMEM_HIST | + 1 << OMAP3_ISP_IOMEM_H3A | + 1 << OMAP3_ISP_IOMEM_PREV | + 1 << OMAP3_ISP_IOMEM_RESZ | + 1 << OMAP3_ISP_IOMEM_SBL | + 1 << OMAP3_ISP_IOMEM_CSI2A_REGS1 | + 1 << OMAP3_ISP_IOMEM_CSIPHY2 | + 1 << OMAP3_ISP_IOMEM_CSI2A_REGS2 | + 1 << OMAP3_ISP_IOMEM_CSI2C_REGS1 | + 1 << OMAP3_ISP_IOMEM_CSIPHY1 | + 1 << OMAP3_ISP_IOMEM_CSI2C_REGS2, + }, +}; + +/* Structure for saving/restoring ISP module registers */ +static struct isp_reg isp_reg_list[] = { + {OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG, 0}, + {OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, 0}, + {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, 0}, + {0, ISP_TOK_TERM, 0} +}; + +/* + * omap3isp_flush - Post pending L3 bus writes by doing a register readback + * @isp: OMAP3 ISP device + * + * In order to force posting of pending writes, we need to write and + * readback the same register, in this case the revision register. + * + * See this link for reference: + * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg08149.html + */ +void omap3isp_flush(struct isp_device *isp) +{ + isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); + isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); +} + +/* + * isp_enable_interrupts - Enable ISP interrupts. + * @isp: OMAP3 ISP device + */ +static void isp_enable_interrupts(struct isp_device *isp) +{ + static const u32 irq = IRQ0ENABLE_CSIA_IRQ + | IRQ0ENABLE_CSIB_IRQ + | IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ + | IRQ0ENABLE_CCDC_LSC_DONE_IRQ + | IRQ0ENABLE_CCDC_VD0_IRQ + | IRQ0ENABLE_CCDC_VD1_IRQ + | IRQ0ENABLE_HS_VS_IRQ + | IRQ0ENABLE_HIST_DONE_IRQ + | IRQ0ENABLE_H3A_AWB_DONE_IRQ + | IRQ0ENABLE_H3A_AF_DONE_IRQ + | IRQ0ENABLE_PRV_DONE_IRQ + | IRQ0ENABLE_RSZ_DONE_IRQ; + + isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); + isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); +} + +/* + * isp_disable_interrupts - Disable ISP interrupts. + * @isp: OMAP3 ISP device + */ +static void isp_disable_interrupts(struct isp_device *isp) +{ + isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); +} + +/** + * isp_set_xclk - Configures the specified cam_xclk to the desired frequency. + * @isp: OMAP3 ISP device + * @xclk: Desired frequency of the clock in Hz. 0 = stable low, 1 is stable high + * @xclksel: XCLK to configure (0 = A, 1 = B). + * + * Configures the specified MCLK divisor in the ISP timing control register + * (TCTRL_CTRL) to generate the desired xclk clock value. + * + * Divisor = cam_mclk_hz / xclk + * + * Returns the final frequency that is actually being generated + **/ +static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) +{ + u32 divisor; + u32 currentxclk; + unsigned long mclk_hz; + + if (!omap3isp_get(isp)) + return 0; + + mclk_hz = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]); + + if (xclk >= mclk_hz) { + divisor = ISPTCTRL_CTRL_DIV_BYPASS; + currentxclk = mclk_hz; + } else if (xclk >= 2) { + divisor = mclk_hz / xclk; + if (divisor >= ISPTCTRL_CTRL_DIV_BYPASS) + divisor = ISPTCTRL_CTRL_DIV_BYPASS - 1; + currentxclk = mclk_hz / divisor; + } else { + divisor = xclk; + currentxclk = 0; + } + + switch (xclksel) { + case 0: + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, + ISPTCTRL_CTRL_DIVA_MASK, + divisor << ISPTCTRL_CTRL_DIVA_SHIFT); + dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n", + currentxclk); + break; + case 1: + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, + ISPTCTRL_CTRL_DIVB_MASK, + divisor << ISPTCTRL_CTRL_DIVB_SHIFT); + dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n", + currentxclk); + break; + default: + omap3isp_put(isp); + dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested " + "xclk. Must be 0 (A) or 1 (B).\n"); + return -EINVAL; + } + + /* Do we go from stable whatever to clock? */ + if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2) + omap3isp_get(isp); + /* Stopping the clock. */ + else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2) + omap3isp_put(isp); + + isp->xclk_divisor[xclksel] = divisor; + + omap3isp_put(isp); + + return currentxclk; +} + +/* + * isp_power_settings - Sysconfig settings, for Power Management. + * @isp: OMAP3 ISP device + * @idle: Consider idle state. + * + * Sets the power settings for the ISP, and SBL bus. + */ +static void isp_power_settings(struct isp_device *isp, int idle) +{ + isp_reg_writel(isp, + ((idle ? ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY : + ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY) << + ISP_SYSCONFIG_MIDLEMODE_SHIFT) | + ((isp->revision == ISP_REVISION_15_0) ? + ISP_SYSCONFIG_AUTOIDLE : 0), + OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); + + if (isp->autoidle) + isp_reg_writel(isp, ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN, + ISP_CTRL); +} + +/* + * Configure the bridge and lane shifter. Valid inputs are + * + * CCDC_INPUT_PARALLEL: Parallel interface + * CCDC_INPUT_CSI2A: CSI2a receiver + * CCDC_INPUT_CCP2B: CCP2b receiver + * CCDC_INPUT_CSI2C: CSI2c receiver + * + * The bridge and lane shifter are configured according to the selected input + * and the ISP platform data. + */ +void omap3isp_configure_bridge(struct isp_device *isp, + enum ccdc_input_entity input, + const struct isp_parallel_platform_data *pdata) +{ + u32 ispctrl_val; + + ispctrl_val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); + ispctrl_val &= ~ISPCTRL_SHIFT_MASK; + ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV; + ispctrl_val &= ~ISPCTRL_PAR_SER_CLK_SEL_MASK; + ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_MASK; + + switch (input) { + case CCDC_INPUT_PARALLEL: + ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; + ispctrl_val |= pdata->data_lane_shift << ISPCTRL_SHIFT_SHIFT; + ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; + ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT; + break; + + case CCDC_INPUT_CSI2A: + ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIA; + break; + + case CCDC_INPUT_CCP2B: + ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIB; + break; + + case CCDC_INPUT_CSI2C: + ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIC; + break; + + default: + return; + } + + ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK; + ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE; + + isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); +} + +/** + * isp_set_pixel_clock - Configures the ISP pixel clock + * @isp: OMAP3 ISP device + * @pixelclk: Average pixel clock in Hz + * + * Set the average pixel clock required by the sensor. The ISP will use the + * lowest possible memory bandwidth settings compatible with the clock. + **/ +static void isp_set_pixel_clock(struct isp_device *isp, unsigned int pixelclk) +{ + isp->isp_ccdc.vpcfg.pixelclk = pixelclk; +} + +void omap3isp_hist_dma_done(struct isp_device *isp) +{ + if (omap3isp_ccdc_busy(&isp->isp_ccdc) || + omap3isp_stat_pcr_busy(&isp->isp_hist)) { + /* Histogram cannot be enabled in this frame anymore */ + atomic_set(&isp->isp_hist.buf_err, 1); + dev_dbg(isp->dev, "hist: Out of synchronization with " + "CCDC. Ignoring next buffer.\n"); + } +} + +static inline void isp_isr_dbg(struct isp_device *isp, u32 irqstatus) +{ + static const char *name[] = { + "CSIA_IRQ", + "res1", + "res2", + "CSIB_LCM_IRQ", + "CSIB_IRQ", + "res5", + "res6", + "res7", + "CCDC_VD0_IRQ", + "CCDC_VD1_IRQ", + "CCDC_VD2_IRQ", + "CCDC_ERR_IRQ", + "H3A_AF_DONE_IRQ", + "H3A_AWB_DONE_IRQ", + "res14", + "res15", + "HIST_DONE_IRQ", + "CCDC_LSC_DONE", + "CCDC_LSC_PREFETCH_COMPLETED", + "CCDC_LSC_PREFETCH_ERROR", + "PRV_DONE_IRQ", + "CBUFF_IRQ", + "res22", + "res23", + "RSZ_DONE_IRQ", + "OVF_IRQ", + "res26", + "res27", + "MMU_ERR_IRQ", + "OCP_ERR_IRQ", + "SEC_ERR_IRQ", + "HS_VS_IRQ", + }; + int i; + + dev_dbg(isp->dev, ""); + + for (i = 0; i < ARRAY_SIZE(name); i++) { + if ((1 << i) & irqstatus) + printk(KERN_CONT "%s ", name[i]); + } + printk(KERN_CONT "\n"); +} + +static void isp_isr_sbl(struct isp_device *isp) +{ + struct device *dev = isp->dev; + u32 sbl_pcr; + + /* + * Handle shared buffer logic overflows for video buffers. + * ISPSBL_PCR_CCDCPRV_2_RSZ_OVF can be safely ignored. + */ + sbl_pcr = isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); + isp_reg_writel(isp, sbl_pcr, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); + sbl_pcr &= ~ISPSBL_PCR_CCDCPRV_2_RSZ_OVF; + + if (sbl_pcr) + dev_dbg(dev, "SBL overflow (PCR = 0x%08x)\n", sbl_pcr); + + if (sbl_pcr & (ISPSBL_PCR_CCDC_WBL_OVF | ISPSBL_PCR_CSIA_WBL_OVF + | ISPSBL_PCR_CSIB_WBL_OVF)) { + isp->isp_ccdc.error = 1; + if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW) + isp->isp_prev.error = 1; + if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER) + isp->isp_res.error = 1; + } + + if (sbl_pcr & ISPSBL_PCR_PRV_WBL_OVF) { + isp->isp_prev.error = 1; + if (isp->isp_res.input == RESIZER_INPUT_VP && + !(isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER)) + isp->isp_res.error = 1; + } + + if (sbl_pcr & (ISPSBL_PCR_RSZ1_WBL_OVF + | ISPSBL_PCR_RSZ2_WBL_OVF + | ISPSBL_PCR_RSZ3_WBL_OVF + | ISPSBL_PCR_RSZ4_WBL_OVF)) + isp->isp_res.error = 1; + + if (sbl_pcr & ISPSBL_PCR_H3A_AF_WBL_OVF) + omap3isp_stat_sbl_overflow(&isp->isp_af); + + if (sbl_pcr & ISPSBL_PCR_H3A_AEAWB_WBL_OVF) + omap3isp_stat_sbl_overflow(&isp->isp_aewb); +} + +/* + * isp_isr - Interrupt Service Routine for Camera ISP module. + * @irq: Not used currently. + * @_isp: Pointer to the OMAP3 ISP device + * + * Handles the corresponding callback if plugged in. + * + * Returns IRQ_HANDLED when IRQ was correctly handled, or IRQ_NONE when the + * IRQ wasn't handled. + */ +static irqreturn_t isp_isr(int irq, void *_isp) +{ + static const u32 ccdc_events = IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ | + IRQ0STATUS_CCDC_LSC_DONE_IRQ | + IRQ0STATUS_CCDC_VD0_IRQ | + IRQ0STATUS_CCDC_VD1_IRQ | + IRQ0STATUS_HS_VS_IRQ; + struct isp_device *isp = _isp; + u32 irqstatus; + int ret; + + irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); + isp_reg_writel(isp, irqstatus, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); + + isp_isr_sbl(isp); + + if (irqstatus & IRQ0STATUS_CSIA_IRQ) { + ret = omap3isp_csi2_isr(&isp->isp_csi2a); + if (ret) + isp->isp_ccdc.error = 1; + } + + if (irqstatus & IRQ0STATUS_CSIB_IRQ) { + ret = omap3isp_ccp2_isr(&isp->isp_ccp2); + if (ret) + isp->isp_ccdc.error = 1; + } + + if (irqstatus & IRQ0STATUS_CCDC_VD0_IRQ) { + if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW) + omap3isp_preview_isr_frame_sync(&isp->isp_prev); + if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER) + omap3isp_resizer_isr_frame_sync(&isp->isp_res); + omap3isp_stat_isr_frame_sync(&isp->isp_aewb); + omap3isp_stat_isr_frame_sync(&isp->isp_af); + omap3isp_stat_isr_frame_sync(&isp->isp_hist); + } + + if (irqstatus & ccdc_events) + omap3isp_ccdc_isr(&isp->isp_ccdc, irqstatus & ccdc_events); + + if (irqstatus & IRQ0STATUS_PRV_DONE_IRQ) { + if (isp->isp_prev.output & PREVIEW_OUTPUT_RESIZER) + omap3isp_resizer_isr_frame_sync(&isp->isp_res); + omap3isp_preview_isr(&isp->isp_prev); + } + + if (irqstatus & IRQ0STATUS_RSZ_DONE_IRQ) + omap3isp_resizer_isr(&isp->isp_res); + + if (irqstatus & IRQ0STATUS_H3A_AWB_DONE_IRQ) + omap3isp_stat_isr(&isp->isp_aewb); + + if (irqstatus & IRQ0STATUS_H3A_AF_DONE_IRQ) + omap3isp_stat_isr(&isp->isp_af); + + if (irqstatus & IRQ0STATUS_HIST_DONE_IRQ) + omap3isp_stat_isr(&isp->isp_hist); + + omap3isp_flush(isp); + +#if defined(DEBUG) && defined(ISP_ISR_DEBUG) + isp_isr_dbg(isp, irqstatus); +#endif + + return IRQ_HANDLED; +} + +/* ----------------------------------------------------------------------------- + * Pipeline power management + * + * Entities must be powered up when part of a pipeline that contains at least + * one open video device node. + * + * To achieve this use the entity use_count field to track the number of users. + * For entities corresponding to video device nodes the use_count field stores + * the users count of the node. For entities corresponding to subdevs the + * use_count field stores the total number of users of all video device nodes + * in the pipeline. + * + * The omap3isp_pipeline_pm_use() function must be called in the open() and + * close() handlers of video device nodes. It increments or decrements the use + * count of all subdev entities in the pipeline. + * + * To react to link management on powered pipelines, the link setup notification + * callback updates the use count of all entities in the source and sink sides + * of the link. + */ + +/* + * isp_pipeline_pm_use_count - Count the number of users of a pipeline + * @entity: The entity + * + * Return the total number of users of all video device nodes in the pipeline. + */ +static int isp_pipeline_pm_use_count(struct media_entity *entity) +{ + struct media_entity_graph graph; + int use = 0; + + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + if (media_entity_type(entity) == MEDIA_ENT_T_DEVNODE) + use += entity->use_count; + } + + return use; +} + +/* + * isp_pipeline_pm_power_one - Apply power change to an entity + * @entity: The entity + * @change: Use count change + * + * Change the entity use count by @change. If the entity is a subdev update its + * power state by calling the core::s_power operation when the use count goes + * from 0 to != 0 or from != 0 to 0. + * + * Return 0 on success or a negative error code on failure. + */ +static int isp_pipeline_pm_power_one(struct media_entity *entity, int change) +{ + struct v4l2_subdev *subdev; + int ret; + + subdev = media_entity_type(entity) == MEDIA_ENT_T_V4L2_SUBDEV + ? media_entity_to_v4l2_subdev(entity) : NULL; + + if (entity->use_count == 0 && change > 0 && subdev != NULL) { + ret = v4l2_subdev_call(subdev, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + } + + entity->use_count += change; + WARN_ON(entity->use_count < 0); + + if (entity->use_count == 0 && change < 0 && subdev != NULL) + v4l2_subdev_call(subdev, core, s_power, 0); + + return 0; +} + +/* + * isp_pipeline_pm_power - Apply power change to all entities in a pipeline + * @entity: The entity + * @change: Use count change + * + * Walk the pipeline to update the use count and the power state of all non-node + * entities. + * + * Return 0 on success or a negative error code on failure. + */ +static int isp_pipeline_pm_power(struct media_entity *entity, int change) +{ + struct media_entity_graph graph; + struct media_entity *first = entity; + int ret = 0; + + if (!change) + return 0; + + media_entity_graph_walk_start(&graph, entity); + + while (!ret && (entity = media_entity_graph_walk_next(&graph))) + if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) + ret = isp_pipeline_pm_power_one(entity, change); + + if (!ret) + return 0; + + media_entity_graph_walk_start(&graph, first); + + while ((first = media_entity_graph_walk_next(&graph)) + && first != entity) + if (media_entity_type(first) != MEDIA_ENT_T_DEVNODE) + isp_pipeline_pm_power_one(first, -change); + + return ret; +} + +/* + * omap3isp_pipeline_pm_use - Update the use count of an entity + * @entity: The entity + * @use: Use (1) or stop using (0) the entity + * + * Update the use count of all entities in the pipeline and power entities on or + * off accordingly. + * + * Return 0 on success or a negative error code on failure. Powering entities + * off is assumed to never fail. No failure can occur when the use parameter is + * set to 0. + */ +int omap3isp_pipeline_pm_use(struct media_entity *entity, int use) +{ + int change = use ? 1 : -1; + int ret; + + mutex_lock(&entity->parent->graph_mutex); + + /* Apply use count to node. */ + entity->use_count += change; + WARN_ON(entity->use_count < 0); + + /* Apply power change to connected non-nodes. */ + ret = isp_pipeline_pm_power(entity, change); + + mutex_unlock(&entity->parent->graph_mutex); + + return ret; +} + +/* + * isp_pipeline_link_notify - Link management notification callback + * @source: Pad at the start of the link + * @sink: Pad at the end of the link + * @flags: New link flags that will be applied + * + * React to link management on powered pipelines by updating the use count of + * all entities in the source and sink sides of the link. Entities are powered + * on or off accordingly. + * + * Return 0 on success or a negative error code on failure. Powering entities + * off is assumed to never fail. This function will not fail for disconnection + * events. + */ +static int isp_pipeline_link_notify(struct media_pad *source, + struct media_pad *sink, u32 flags) +{ + int source_use = isp_pipeline_pm_use_count(source->entity); + int sink_use = isp_pipeline_pm_use_count(sink->entity); + int ret; + + if (!(flags & MEDIA_LNK_FL_ENABLED)) { + /* Powering off entities is assumed to never fail. */ + isp_pipeline_pm_power(source->entity, -sink_use); + isp_pipeline_pm_power(sink->entity, -source_use); + return 0; + } + + ret = isp_pipeline_pm_power(source->entity, sink_use); + if (ret < 0) + return ret; + + ret = isp_pipeline_pm_power(sink->entity, source_use); + if (ret < 0) + isp_pipeline_pm_power(source->entity, -sink_use); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Pipeline stream management + */ + +/* + * isp_pipeline_enable - Enable streaming on a pipeline + * @pipe: ISP pipeline + * @mode: Stream mode (single shot or continuous) + * + * Walk the entities chain starting at the pipeline output video node and start + * all modules in the chain in the given mode. + * + * Return 0 if successfull, or the return value of the failed video::s_stream + * operation otherwise. + */ +static int isp_pipeline_enable(struct isp_pipeline *pipe, + enum isp_pipeline_stream_state mode) +{ + struct isp_device *isp = pipe->output->isp; + struct media_entity *entity; + struct media_pad *pad; + struct v4l2_subdev *subdev; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~(ISP_PIPELINE_IDLE_INPUT | ISP_PIPELINE_IDLE_OUTPUT); + spin_unlock_irqrestore(&pipe->lock, flags); + + pipe->do_propagation = false; + + entity = &pipe->output->video.entity; + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + ret = v4l2_subdev_call(subdev, video, s_stream, mode); + if (ret < 0 && ret != -ENOIOCTLCMD) + break; + + if (subdev == &isp->isp_ccdc.subdev) { + v4l2_subdev_call(&isp->isp_aewb.subdev, video, + s_stream, mode); + v4l2_subdev_call(&isp->isp_af.subdev, video, + s_stream, mode); + v4l2_subdev_call(&isp->isp_hist.subdev, video, + s_stream, mode); + pipe->do_propagation = true; + } + } + + /* Frame number propagation. In continuous streaming mode the number + * is incremented in the frame start ISR. In mem-to-mem mode + * singleshot is used and frame start IRQs are not available. + * Thus we have to increment the number here. + */ + if (pipe->do_propagation && mode == ISP_PIPELINE_STREAM_SINGLESHOT) + atomic_inc(&pipe->frame_number); + + return ret; +} + +static int isp_pipeline_wait_resizer(struct isp_device *isp) +{ + return omap3isp_resizer_busy(&isp->isp_res); +} + +static int isp_pipeline_wait_preview(struct isp_device *isp) +{ + return omap3isp_preview_busy(&isp->isp_prev); +} + +static int isp_pipeline_wait_ccdc(struct isp_device *isp) +{ + return omap3isp_stat_busy(&isp->isp_af) + || omap3isp_stat_busy(&isp->isp_aewb) + || omap3isp_stat_busy(&isp->isp_hist) + || omap3isp_ccdc_busy(&isp->isp_ccdc); +} + +#define ISP_STOP_TIMEOUT msecs_to_jiffies(1000) + +static int isp_pipeline_wait(struct isp_device *isp, + int(*busy)(struct isp_device *isp)) +{ + unsigned long timeout = jiffies + ISP_STOP_TIMEOUT; + + while (!time_after(jiffies, timeout)) { + if (!busy(isp)) + return 0; + } + + return 1; +} + +/* + * isp_pipeline_disable - Disable streaming on a pipeline + * @pipe: ISP pipeline + * + * Walk the entities chain starting at the pipeline output video node and stop + * all modules in the chain. Wait synchronously for the modules to be stopped if + * necessary. + * + * Return 0 if all modules have been properly stopped, or -ETIMEDOUT if a module + * can't be stopped (in which case a software reset of the ISP is probably + * necessary). + */ +static int isp_pipeline_disable(struct isp_pipeline *pipe) +{ + struct isp_device *isp = pipe->output->isp; + struct media_entity *entity; + struct media_pad *pad; + struct v4l2_subdev *subdev; + int failure = 0; + int ret; + + /* + * We need to stop all the modules after CCDC first or they'll + * never stop since they may not get a full frame from CCDC. + */ + entity = &pipe->output->video.entity; + while (1) { + pad = &entity->pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + entity = pad->entity; + subdev = media_entity_to_v4l2_subdev(entity); + + if (subdev == &isp->isp_ccdc.subdev) { + v4l2_subdev_call(&isp->isp_aewb.subdev, + video, s_stream, 0); + v4l2_subdev_call(&isp->isp_af.subdev, + video, s_stream, 0); + v4l2_subdev_call(&isp->isp_hist.subdev, + video, s_stream, 0); + } + + v4l2_subdev_call(subdev, video, s_stream, 0); + + if (subdev == &isp->isp_res.subdev) + ret = isp_pipeline_wait(isp, isp_pipeline_wait_resizer); + else if (subdev == &isp->isp_prev.subdev) + ret = isp_pipeline_wait(isp, isp_pipeline_wait_preview); + else if (subdev == &isp->isp_ccdc.subdev) + ret = isp_pipeline_wait(isp, isp_pipeline_wait_ccdc); + else + ret = 0; + + if (ret) { + dev_info(isp->dev, "Unable to stop %s\n", subdev->name); + failure = -ETIMEDOUT; + } + } + + return failure; +} + +/* + * omap3isp_pipeline_set_stream - Enable/disable streaming on a pipeline + * @pipe: ISP pipeline + * @state: Stream state (stopped, single shot or continuous) + * + * Set the pipeline to the given stream state. Pipelines can be started in + * single-shot or continuous mode. + * + * Return 0 if successfull, or the return value of the failed video::s_stream + * operation otherwise. + */ +int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, + enum isp_pipeline_stream_state state) +{ + int ret; + + if (state == ISP_PIPELINE_STREAM_STOPPED) + ret = isp_pipeline_disable(pipe); + else + ret = isp_pipeline_enable(pipe, state); + pipe->stream_state = state; + + return ret; +} + +/* + * isp_pipeline_resume - Resume streaming on a pipeline + * @pipe: ISP pipeline + * + * Resume video output and input and re-enable pipeline. + */ +static void isp_pipeline_resume(struct isp_pipeline *pipe) +{ + int singleshot = pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT; + + omap3isp_video_resume(pipe->output, !singleshot); + if (singleshot) + omap3isp_video_resume(pipe->input, 0); + isp_pipeline_enable(pipe, pipe->stream_state); +} + +/* + * isp_pipeline_suspend - Suspend streaming on a pipeline + * @pipe: ISP pipeline + * + * Suspend pipeline. + */ +static void isp_pipeline_suspend(struct isp_pipeline *pipe) +{ + isp_pipeline_disable(pipe); +} + +/* + * isp_pipeline_is_last - Verify if entity has an enabled link to the output + * video node + * @me: ISP module's media entity + * + * Returns 1 if the entity has an enabled link to the output video node or 0 + * otherwise. It's true only while pipeline can have no more than one output + * node. + */ +static int isp_pipeline_is_last(struct media_entity *me) +{ + struct isp_pipeline *pipe; + struct media_pad *pad; + + if (!me->pipe) + return 0; + pipe = to_isp_pipeline(me); + if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED) + return 0; + pad = media_entity_remote_source(&pipe->output->pad); + return pad->entity == me; +} + +/* + * isp_suspend_module_pipeline - Suspend pipeline to which belongs the module + * @me: ISP module's media entity + * + * Suspend the whole pipeline if module's entity has an enabled link to the + * output video node. It works only while pipeline can have no more than one + * output node. + */ +static void isp_suspend_module_pipeline(struct media_entity *me) +{ + if (isp_pipeline_is_last(me)) + isp_pipeline_suspend(to_isp_pipeline(me)); +} + +/* + * isp_resume_module_pipeline - Resume pipeline to which belongs the module + * @me: ISP module's media entity + * + * Resume the whole pipeline if module's entity has an enabled link to the + * output video node. It works only while pipeline can have no more than one + * output node. + */ +static void isp_resume_module_pipeline(struct media_entity *me) +{ + if (isp_pipeline_is_last(me)) + isp_pipeline_resume(to_isp_pipeline(me)); +} + +/* + * isp_suspend_modules - Suspend ISP submodules. + * @isp: OMAP3 ISP device + * + * Returns 0 if suspend left in idle state all the submodules properly, + * or returns 1 if a general Reset is required to suspend the submodules. + */ +static int isp_suspend_modules(struct isp_device *isp) +{ + unsigned long timeout; + + omap3isp_stat_suspend(&isp->isp_aewb); + omap3isp_stat_suspend(&isp->isp_af); + omap3isp_stat_suspend(&isp->isp_hist); + isp_suspend_module_pipeline(&isp->isp_res.subdev.entity); + isp_suspend_module_pipeline(&isp->isp_prev.subdev.entity); + isp_suspend_module_pipeline(&isp->isp_ccdc.subdev.entity); + isp_suspend_module_pipeline(&isp->isp_csi2a.subdev.entity); + isp_suspend_module_pipeline(&isp->isp_ccp2.subdev.entity); + + timeout = jiffies + ISP_STOP_TIMEOUT; + while (omap3isp_stat_busy(&isp->isp_af) + || omap3isp_stat_busy(&isp->isp_aewb) + || omap3isp_stat_busy(&isp->isp_hist) + || omap3isp_preview_busy(&isp->isp_prev) + || omap3isp_resizer_busy(&isp->isp_res) + || omap3isp_ccdc_busy(&isp->isp_ccdc)) { + if (time_after(jiffies, timeout)) { + dev_info(isp->dev, "can't stop modules.\n"); + return 1; + } + msleep(1); + } + + return 0; +} + +/* + * isp_resume_modules - Resume ISP submodules. + * @isp: OMAP3 ISP device + */ +static void isp_resume_modules(struct isp_device *isp) +{ + omap3isp_stat_resume(&isp->isp_aewb); + omap3isp_stat_resume(&isp->isp_af); + omap3isp_stat_resume(&isp->isp_hist); + isp_resume_module_pipeline(&isp->isp_res.subdev.entity); + isp_resume_module_pipeline(&isp->isp_prev.subdev.entity); + isp_resume_module_pipeline(&isp->isp_ccdc.subdev.entity); + isp_resume_module_pipeline(&isp->isp_csi2a.subdev.entity); + isp_resume_module_pipeline(&isp->isp_ccp2.subdev.entity); +} + +/* + * isp_reset - Reset ISP with a timeout wait for idle. + * @isp: OMAP3 ISP device + */ +static int isp_reset(struct isp_device *isp) +{ + unsigned long timeout = 0; + + isp_reg_writel(isp, + isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG) + | ISP_SYSCONFIG_SOFTRESET, + OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); + while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, + ISP_SYSSTATUS) & 0x1)) { + if (timeout++ > 10000) { + dev_alert(isp->dev, "cannot reset ISP\n"); + return -ETIMEDOUT; + } + udelay(1); + } + + return 0; +} + +/* + * isp_save_context - Saves the values of the ISP module registers. + * @isp: OMAP3 ISP device + * @reg_list: Structure containing pairs of register address and value to + * modify on OMAP. + */ +static void +isp_save_context(struct isp_device *isp, struct isp_reg *reg_list) +{ + struct isp_reg *next = reg_list; + + for (; next->reg != ISP_TOK_TERM; next++) + next->val = isp_reg_readl(isp, next->mmio_range, next->reg); +} + +/* + * isp_restore_context - Restores the values of the ISP module registers. + * @isp: OMAP3 ISP device + * @reg_list: Structure containing pairs of register address and value to + * modify on OMAP. + */ +static void +isp_restore_context(struct isp_device *isp, struct isp_reg *reg_list) +{ + struct isp_reg *next = reg_list; + + for (; next->reg != ISP_TOK_TERM; next++) + isp_reg_writel(isp, next->val, next->mmio_range, next->reg); +} + +/* + * isp_save_ctx - Saves ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. + * @isp: OMAP3 ISP device + * + * Routine for saving the context of each module in the ISP. + * CCDC, HIST, H3A, PREV, RESZ and MMU. + */ +static void isp_save_ctx(struct isp_device *isp) +{ + isp_save_context(isp, isp_reg_list); + if (isp->iommu) + iommu_save_ctx(isp->iommu); +} + +/* + * isp_restore_ctx - Restores ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. + * @isp: OMAP3 ISP device + * + * Routine for restoring the context of each module in the ISP. + * CCDC, HIST, H3A, PREV, RESZ and MMU. + */ +static void isp_restore_ctx(struct isp_device *isp) +{ + isp_restore_context(isp, isp_reg_list); + if (isp->iommu) + iommu_restore_ctx(isp->iommu); + omap3isp_ccdc_restore_context(isp); + omap3isp_preview_restore_context(isp); +} + +/* ----------------------------------------------------------------------------- + * SBL resources management + */ +#define OMAP3_ISP_SBL_READ (OMAP3_ISP_SBL_CSI1_READ | \ + OMAP3_ISP_SBL_CCDC_LSC_READ | \ + OMAP3_ISP_SBL_PREVIEW_READ | \ + OMAP3_ISP_SBL_RESIZER_READ) +#define OMAP3_ISP_SBL_WRITE (OMAP3_ISP_SBL_CSI1_WRITE | \ + OMAP3_ISP_SBL_CSI2A_WRITE | \ + OMAP3_ISP_SBL_CSI2C_WRITE | \ + OMAP3_ISP_SBL_CCDC_WRITE | \ + OMAP3_ISP_SBL_PREVIEW_WRITE) + +void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res) +{ + u32 sbl = 0; + + isp->sbl_resources |= res; + + if (isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ) + sbl |= ISPCTRL_SBL_SHARED_RPORTA; + + if (isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ) + sbl |= ISPCTRL_SBL_SHARED_RPORTB; + + if (isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE) + sbl |= ISPCTRL_SBL_SHARED_WPORTC; + + if (isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE) + sbl |= ISPCTRL_SBL_WR0_RAM_EN; + + if (isp->sbl_resources & OMAP3_ISP_SBL_WRITE) + sbl |= ISPCTRL_SBL_WR1_RAM_EN; + + if (isp->sbl_resources & OMAP3_ISP_SBL_READ) + sbl |= ISPCTRL_SBL_RD_RAM_EN; + + isp_reg_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); +} + +void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res) +{ + u32 sbl = 0; + + isp->sbl_resources &= ~res; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ)) + sbl |= ISPCTRL_SBL_SHARED_RPORTA; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ)) + sbl |= ISPCTRL_SBL_SHARED_RPORTB; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE)) + sbl |= ISPCTRL_SBL_SHARED_WPORTC; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE)) + sbl |= ISPCTRL_SBL_WR0_RAM_EN; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_WRITE)) + sbl |= ISPCTRL_SBL_WR1_RAM_EN; + + if (!(isp->sbl_resources & OMAP3_ISP_SBL_READ)) + sbl |= ISPCTRL_SBL_RD_RAM_EN; + + isp_reg_clr(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); +} + +/* + * isp_module_sync_idle - Helper to sync module with its idle state + * @me: ISP submodule's media entity + * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization + * @stopping: flag which tells module wants to stop + * + * This function checks if ISP submodule needs to wait for next interrupt. If + * yes, makes the caller to sleep while waiting for such event. + */ +int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, + atomic_t *stopping) +{ + struct isp_pipeline *pipe = to_isp_pipeline(me); + + if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED || + (pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT && + !isp_pipeline_ready(pipe))) + return 0; + + /* + * atomic_set() doesn't include memory barrier on ARM platform for SMP + * scenario. We'll call it here to avoid race conditions. + */ + atomic_set(stopping, 1); + smp_mb(); + + /* + * If module is the last one, it's writing to memory. In this case, + * it's necessary to check if the module is already paused due to + * DMA queue underrun or if it has to wait for next interrupt to be + * idle. + * If it isn't the last one, the function won't sleep but *stopping + * will still be set to warn next submodule caller's interrupt the + * module wants to be idle. + */ + if (isp_pipeline_is_last(me)) { + struct isp_video *video = pipe->output; + unsigned long flags; + spin_lock_irqsave(&video->queue->irqlock, flags); + if (video->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { + spin_unlock_irqrestore(&video->queue->irqlock, flags); + atomic_set(stopping, 0); + smp_mb(); + return 0; + } + spin_unlock_irqrestore(&video->queue->irqlock, flags); + if (!wait_event_timeout(*wait, !atomic_read(stopping), + msecs_to_jiffies(1000))) { + atomic_set(stopping, 0); + smp_mb(); + return -ETIMEDOUT; + } + } + + return 0; +} + +/* + * omap3isp_module_sync_is_stopped - Helper to verify if module was stopping + * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization + * @stopping: flag which tells module wants to stop + * + * This function checks if ISP submodule was stopping. In case of yes, it + * notices the caller by setting stopping to 0 and waking up the wait queue. + * Returns 1 if it was stopping or 0 otherwise. + */ +int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait, + atomic_t *stopping) +{ + if (atomic_cmpxchg(stopping, 1, 0)) { + wake_up(wait); + return 1; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Clock management + */ + +#define ISPCTRL_CLKS_MASK (ISPCTRL_H3A_CLK_EN | \ + ISPCTRL_HIST_CLK_EN | \ + ISPCTRL_RSZ_CLK_EN | \ + (ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN) | \ + (ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN)) + +static void __isp_subclk_update(struct isp_device *isp) +{ + u32 clk = 0; + + if (isp->subclk_resources & OMAP3_ISP_SUBCLK_H3A) + clk |= ISPCTRL_H3A_CLK_EN; + + if (isp->subclk_resources & OMAP3_ISP_SUBCLK_HIST) + clk |= ISPCTRL_HIST_CLK_EN; + + if (isp->subclk_resources & OMAP3_ISP_SUBCLK_RESIZER) + clk |= ISPCTRL_RSZ_CLK_EN; + + /* NOTE: For CCDC & Preview submodules, we need to affect internal + * RAM aswell. + */ + if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC) + clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN; + + if (isp->subclk_resources & OMAP3_ISP_SUBCLK_PREVIEW) + clk |= ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN; + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_CLKS_MASK, clk); +} + +void omap3isp_subclk_enable(struct isp_device *isp, + enum isp_subclk_resource res) +{ + isp->subclk_resources |= res; + + __isp_subclk_update(isp); +} + +void omap3isp_subclk_disable(struct isp_device *isp, + enum isp_subclk_resource res) +{ + isp->subclk_resources &= ~res; + + __isp_subclk_update(isp); +} + +/* + * isp_enable_clocks - Enable ISP clocks + * @isp: OMAP3 ISP device + * + * Return 0 if successful, or clk_enable return value if any of tthem fails. + */ +static int isp_enable_clocks(struct isp_device *isp) +{ + int r; + unsigned long rate; + int divisor; + + /* + * cam_mclk clock chain: + * dpll4 -> dpll4_m5 -> dpll4_m5x2 -> cam_mclk + * + * In OMAP3630 dpll4_m5x2 != 2 x dpll4_m5 but both are + * set to the same value. Hence the rate set for dpll4_m5 + * has to be twice of what is set on OMAP3430 to get + * the required value for cam_mclk + */ + if (cpu_is_omap3630()) + divisor = 1; + else + divisor = 2; + + r = clk_enable(isp->clock[ISP_CLK_CAM_ICK]); + if (r) { + dev_err(isp->dev, "clk_enable cam_ick failed\n"); + goto out_clk_enable_ick; + } + r = clk_set_rate(isp->clock[ISP_CLK_DPLL4_M5_CK], + CM_CAM_MCLK_HZ/divisor); + if (r) { + dev_err(isp->dev, "clk_set_rate for dpll4_m5_ck failed\n"); + goto out_clk_enable_mclk; + } + r = clk_enable(isp->clock[ISP_CLK_CAM_MCLK]); + if (r) { + dev_err(isp->dev, "clk_enable cam_mclk failed\n"); + goto out_clk_enable_mclk; + } + rate = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]); + if (rate != CM_CAM_MCLK_HZ) + dev_warn(isp->dev, "unexpected cam_mclk rate:\n" + " expected : %d\n" + " actual : %ld\n", CM_CAM_MCLK_HZ, rate); + r = clk_enable(isp->clock[ISP_CLK_CSI2_FCK]); + if (r) { + dev_err(isp->dev, "clk_enable csi2_fck failed\n"); + goto out_clk_enable_csi2_fclk; + } + return 0; + +out_clk_enable_csi2_fclk: + clk_disable(isp->clock[ISP_CLK_CAM_MCLK]); +out_clk_enable_mclk: + clk_disable(isp->clock[ISP_CLK_CAM_ICK]); +out_clk_enable_ick: + return r; +} + +/* + * isp_disable_clocks - Disable ISP clocks + * @isp: OMAP3 ISP device + */ +static void isp_disable_clocks(struct isp_device *isp) +{ + clk_disable(isp->clock[ISP_CLK_CAM_ICK]); + clk_disable(isp->clock[ISP_CLK_CAM_MCLK]); + clk_disable(isp->clock[ISP_CLK_CSI2_FCK]); +} + +static const char *isp_clocks[] = { + "cam_ick", + "cam_mclk", + "dpll4_m5_ck", + "csi2_96m_fck", + "l3_ick", +}; + +static void isp_put_clocks(struct isp_device *isp) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) { + if (isp->clock[i]) { + clk_put(isp->clock[i]); + isp->clock[i] = NULL; + } + } +} + +static int isp_get_clocks(struct isp_device *isp) +{ + struct clk *clk; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) { + clk = clk_get(isp->dev, isp_clocks[i]); + if (IS_ERR(clk)) { + dev_err(isp->dev, "clk_get %s failed\n", isp_clocks[i]); + isp_put_clocks(isp); + return PTR_ERR(clk); + } + + isp->clock[i] = clk; + } + + return 0; +} + +/* + * omap3isp_get - Acquire the ISP resource. + * + * Initializes the clocks for the first acquire. + * + * Increment the reference count on the ISP. If the first reference is taken, + * enable clocks and power-up all submodules. + * + * Return a pointer to the ISP device structure, or NULL if an error occured. + */ +struct isp_device *omap3isp_get(struct isp_device *isp) +{ + struct isp_device *__isp = isp; + + if (isp == NULL) + return NULL; + + mutex_lock(&isp->isp_mutex); + if (isp->ref_count > 0) + goto out; + + if (isp_enable_clocks(isp) < 0) { + __isp = NULL; + goto out; + } + + /* We don't want to restore context before saving it! */ + if (isp->has_context) + isp_restore_ctx(isp); + else + isp->has_context = 1; + + isp_enable_interrupts(isp); + +out: + if (__isp != NULL) + isp->ref_count++; + mutex_unlock(&isp->isp_mutex); + + return __isp; +} + +/* + * omap3isp_put - Release the ISP + * + * Decrement the reference count on the ISP. If the last reference is released, + * power-down all submodules, disable clocks and free temporary buffers. + */ +void omap3isp_put(struct isp_device *isp) +{ + if (isp == NULL) + return; + + mutex_lock(&isp->isp_mutex); + BUG_ON(isp->ref_count == 0); + if (--isp->ref_count == 0) { + isp_disable_interrupts(isp); + isp_save_ctx(isp); + isp_disable_clocks(isp); + } + mutex_unlock(&isp->isp_mutex); +} + +/* -------------------------------------------------------------------------- + * Platform device driver + */ + +/* + * omap3isp_print_status - Prints the values of the ISP Control Module registers + * @isp: OMAP3 ISP device + */ +#define ISP_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###ISP " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_##name)) +#define SBL_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###SBL " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_##name)) + +void omap3isp_print_status(struct isp_device *isp) +{ + dev_dbg(isp->dev, "-------------ISP Register dump--------------\n"); + + ISP_PRINT_REGISTER(isp, SYSCONFIG); + ISP_PRINT_REGISTER(isp, SYSSTATUS); + ISP_PRINT_REGISTER(isp, IRQ0ENABLE); + ISP_PRINT_REGISTER(isp, IRQ0STATUS); + ISP_PRINT_REGISTER(isp, TCTRL_GRESET_LENGTH); + ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_REPLAY); + ISP_PRINT_REGISTER(isp, CTRL); + ISP_PRINT_REGISTER(isp, TCTRL_CTRL); + ISP_PRINT_REGISTER(isp, TCTRL_FRAME); + ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_DELAY); + ISP_PRINT_REGISTER(isp, TCTRL_STRB_DELAY); + ISP_PRINT_REGISTER(isp, TCTRL_SHUT_DELAY); + ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_LENGTH); + ISP_PRINT_REGISTER(isp, TCTRL_STRB_LENGTH); + ISP_PRINT_REGISTER(isp, TCTRL_SHUT_LENGTH); + + SBL_PRINT_REGISTER(isp, PCR); + SBL_PRINT_REGISTER(isp, SDR_REQ_EXP); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +#ifdef CONFIG_PM + +/* + * Power management support. + * + * As the ISP can't properly handle an input video stream interruption on a non + * frame boundary, the ISP pipelines need to be stopped before sensors get + * suspended. However, as suspending the sensors can require a running clock, + * which can be provided by the ISP, the ISP can't be completely suspended + * before the sensor. + * + * To solve this problem power management support is split into prepare/complete + * and suspend/resume operations. The pipelines are stopped in prepare() and the + * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in + * resume(), and the the pipelines are restarted in complete(). + * + * TODO: PM dependencies between the ISP and sensors are not modeled explicitly + * yet. + */ +static int isp_pm_prepare(struct device *dev) +{ + struct isp_device *isp = dev_get_drvdata(dev); + int reset; + + WARN_ON(mutex_is_locked(&isp->isp_mutex)); + + if (isp->ref_count == 0) + return 0; + + reset = isp_suspend_modules(isp); + isp_disable_interrupts(isp); + isp_save_ctx(isp); + if (reset) + isp_reset(isp); + + return 0; +} + +static int isp_pm_suspend(struct device *dev) +{ + struct isp_device *isp = dev_get_drvdata(dev); + + WARN_ON(mutex_is_locked(&isp->isp_mutex)); + + if (isp->ref_count) + isp_disable_clocks(isp); + + return 0; +} + +static int isp_pm_resume(struct device *dev) +{ + struct isp_device *isp = dev_get_drvdata(dev); + + if (isp->ref_count == 0) + return 0; + + return isp_enable_clocks(isp); +} + +static void isp_pm_complete(struct device *dev) +{ + struct isp_device *isp = dev_get_drvdata(dev); + + if (isp->ref_count == 0) + return; + + isp_restore_ctx(isp); + isp_enable_interrupts(isp); + isp_resume_modules(isp); +} + +#else + +#define isp_pm_prepare NULL +#define isp_pm_suspend NULL +#define isp_pm_resume NULL +#define isp_pm_complete NULL + +#endif /* CONFIG_PM */ + +static void isp_unregister_entities(struct isp_device *isp) +{ + omap3isp_csi2_unregister_entities(&isp->isp_csi2a); + omap3isp_ccp2_unregister_entities(&isp->isp_ccp2); + omap3isp_ccdc_unregister_entities(&isp->isp_ccdc); + omap3isp_preview_unregister_entities(&isp->isp_prev); + omap3isp_resizer_unregister_entities(&isp->isp_res); + omap3isp_stat_unregister_entities(&isp->isp_aewb); + omap3isp_stat_unregister_entities(&isp->isp_af); + omap3isp_stat_unregister_entities(&isp->isp_hist); + + v4l2_device_unregister(&isp->v4l2_dev); + media_device_unregister(&isp->media_dev); +} + +/* + * isp_register_subdev_group - Register a group of subdevices + * @isp: OMAP3 ISP device + * @board_info: I2C subdevs board information array + * + * Register all I2C subdevices in the board_info array. The array must be + * terminated by a NULL entry, and the first entry must be the sensor. + * + * Return a pointer to the sensor media entity if it has been successfully + * registered, or NULL otherwise. + */ +static struct v4l2_subdev * +isp_register_subdev_group(struct isp_device *isp, + struct isp_subdev_i2c_board_info *board_info) +{ + struct v4l2_subdev *sensor = NULL; + unsigned int first; + + if (board_info->board_info == NULL) + return NULL; + + for (first = 1; board_info->board_info; ++board_info, first = 0) { + struct v4l2_subdev *subdev; + struct i2c_adapter *adapter; + + adapter = i2c_get_adapter(board_info->i2c_adapter_id); + if (adapter == NULL) { + printk(KERN_ERR "%s: Unable to get I2C adapter %d for " + "device %s\n", __func__, + board_info->i2c_adapter_id, + board_info->board_info->type); + continue; + } + + subdev = v4l2_i2c_new_subdev_board(&isp->v4l2_dev, adapter, + board_info->board_info, NULL); + if (subdev == NULL) { + printk(KERN_ERR "%s: Unable to register subdev %s\n", + __func__, board_info->board_info->type); + continue; + } + + if (first) + sensor = subdev; + } + + return sensor; +} + +static int isp_register_entities(struct isp_device *isp) +{ + struct isp_platform_data *pdata = isp->pdata; + struct isp_v4l2_subdevs_group *subdevs; + int ret; + + isp->media_dev.dev = isp->dev; + strlcpy(isp->media_dev.model, "TI OMAP3 ISP", + sizeof(isp->media_dev.model)); + isp->media_dev.link_notify = isp_pipeline_link_notify; + ret = media_device_register(&isp->media_dev); + if (ret < 0) { + printk(KERN_ERR "%s: Media device registration failed (%d)\n", + __func__, ret); + return ret; + } + + isp->v4l2_dev.mdev = &isp->media_dev; + ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); + if (ret < 0) { + printk(KERN_ERR "%s: V4L2 device registration failed (%d)\n", + __func__, ret); + goto done; + } + + /* Register internal entities */ + ret = omap3isp_ccp2_register_entities(&isp->isp_ccp2, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_csi2_register_entities(&isp->isp_csi2a, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_ccdc_register_entities(&isp->isp_ccdc, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_preview_register_entities(&isp->isp_prev, + &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_resizer_register_entities(&isp->isp_res, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_stat_register_entities(&isp->isp_aewb, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_stat_register_entities(&isp->isp_af, &isp->v4l2_dev); + if (ret < 0) + goto done; + + ret = omap3isp_stat_register_entities(&isp->isp_hist, &isp->v4l2_dev); + if (ret < 0) + goto done; + + /* Register external entities */ + for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) { + struct v4l2_subdev *sensor; + struct media_entity *input; + unsigned int flags; + unsigned int pad; + + sensor = isp_register_subdev_group(isp, subdevs->subdevs); + if (sensor == NULL) + continue; + + sensor->host_priv = subdevs; + + /* Connect the sensor to the correct interface module. Parallel + * sensors are connected directly to the CCDC, while serial + * sensors are connected to the CSI2a, CCP2b or CSI2c receiver + * through CSIPHY1 or CSIPHY2. + */ + switch (subdevs->interface) { + case ISP_INTERFACE_PARALLEL: + input = &isp->isp_ccdc.subdev.entity; + pad = CCDC_PAD_SINK; + flags = 0; + break; + + case ISP_INTERFACE_CSI2A_PHY2: + input = &isp->isp_csi2a.subdev.entity; + pad = CSI2_PAD_SINK; + flags = MEDIA_LNK_FL_IMMUTABLE + | MEDIA_LNK_FL_ENABLED; + break; + + case ISP_INTERFACE_CCP2B_PHY1: + case ISP_INTERFACE_CCP2B_PHY2: + input = &isp->isp_ccp2.subdev.entity; + pad = CCP2_PAD_SINK; + flags = 0; + break; + + case ISP_INTERFACE_CSI2C_PHY1: + input = &isp->isp_csi2c.subdev.entity; + pad = CSI2_PAD_SINK; + flags = MEDIA_LNK_FL_IMMUTABLE + | MEDIA_LNK_FL_ENABLED; + break; + + default: + printk(KERN_ERR "%s: invalid interface type %u\n", + __func__, subdevs->interface); + ret = -EINVAL; + goto done; + } + + ret = media_entity_create_link(&sensor->entity, 0, input, pad, + flags); + if (ret < 0) + goto done; + } + + ret = v4l2_device_register_subdev_nodes(&isp->v4l2_dev); + +done: + if (ret < 0) + isp_unregister_entities(isp); + + return ret; +} + +static void isp_cleanup_modules(struct isp_device *isp) +{ + omap3isp_h3a_aewb_cleanup(isp); + omap3isp_h3a_af_cleanup(isp); + omap3isp_hist_cleanup(isp); + omap3isp_resizer_cleanup(isp); + omap3isp_preview_cleanup(isp); + omap3isp_ccdc_cleanup(isp); + omap3isp_ccp2_cleanup(isp); + omap3isp_csi2_cleanup(isp); +} + +static int isp_initialize_modules(struct isp_device *isp) +{ + int ret; + + ret = omap3isp_csiphy_init(isp); + if (ret < 0) { + dev_err(isp->dev, "CSI PHY initialization failed\n"); + goto error_csiphy; + } + + ret = omap3isp_csi2_init(isp); + if (ret < 0) { + dev_err(isp->dev, "CSI2 initialization failed\n"); + goto error_csi2; + } + + ret = omap3isp_ccp2_init(isp); + if (ret < 0) { + dev_err(isp->dev, "CCP2 initialization failed\n"); + goto error_ccp2; + } + + ret = omap3isp_ccdc_init(isp); + if (ret < 0) { + dev_err(isp->dev, "CCDC initialization failed\n"); + goto error_ccdc; + } + + ret = omap3isp_preview_init(isp); + if (ret < 0) { + dev_err(isp->dev, "Preview initialization failed\n"); + goto error_preview; + } + + ret = omap3isp_resizer_init(isp); + if (ret < 0) { + dev_err(isp->dev, "Resizer initialization failed\n"); + goto error_resizer; + } + + ret = omap3isp_hist_init(isp); + if (ret < 0) { + dev_err(isp->dev, "Histogram initialization failed\n"); + goto error_hist; + } + + ret = omap3isp_h3a_aewb_init(isp); + if (ret < 0) { + dev_err(isp->dev, "H3A AEWB initialization failed\n"); + goto error_h3a_aewb; + } + + ret = omap3isp_h3a_af_init(isp); + if (ret < 0) { + dev_err(isp->dev, "H3A AF initialization failed\n"); + goto error_h3a_af; + } + + /* Connect the submodules. */ + ret = media_entity_create_link( + &isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE, + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccp2.subdev.entity, CCP2_PAD_SOURCE, + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, + &isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF, + &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_prev.subdev.entity, PREV_PAD_SOURCE, + &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, + &isp->isp_aewb.subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, + &isp->isp_af.subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + goto error_link; + + ret = media_entity_create_link( + &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, + &isp->isp_hist.subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + goto error_link; + + return 0; + +error_link: + omap3isp_h3a_af_cleanup(isp); +error_h3a_af: + omap3isp_h3a_aewb_cleanup(isp); +error_h3a_aewb: + omap3isp_hist_cleanup(isp); +error_hist: + omap3isp_resizer_cleanup(isp); +error_resizer: + omap3isp_preview_cleanup(isp); +error_preview: + omap3isp_ccdc_cleanup(isp); +error_ccdc: + omap3isp_ccp2_cleanup(isp); +error_ccp2: + omap3isp_csi2_cleanup(isp); +error_csi2: +error_csiphy: + return ret; +} + +/* + * isp_remove - Remove ISP platform device + * @pdev: Pointer to ISP platform device + * + * Always returns 0. + */ +static int isp_remove(struct platform_device *pdev) +{ + struct isp_device *isp = platform_get_drvdata(pdev); + int i; + + isp_unregister_entities(isp); + isp_cleanup_modules(isp); + + omap3isp_get(isp); + iommu_put(isp->iommu); + omap3isp_put(isp); + + free_irq(isp->irq_num, isp); + isp_put_clocks(isp); + + for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) { + if (isp->mmio_base[i]) { + iounmap(isp->mmio_base[i]); + isp->mmio_base[i] = NULL; + } + + if (isp->mmio_base_phys[i]) { + release_mem_region(isp->mmio_base_phys[i], + isp->mmio_size[i]); + isp->mmio_base_phys[i] = 0; + } + } + + regulator_put(isp->isp_csiphy1.vdd); + regulator_put(isp->isp_csiphy2.vdd); + kfree(isp); + + return 0; +} + +static int isp_map_mem_resource(struct platform_device *pdev, + struct isp_device *isp, + enum isp_mem_resources res) +{ + struct resource *mem; + + /* request the mem region for the camera registers */ + + mem = platform_get_resource(pdev, IORESOURCE_MEM, res); + if (!mem) { + dev_err(isp->dev, "no mem resource?\n"); + return -ENODEV; + } + + if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { + dev_err(isp->dev, + "cannot reserve camera register I/O region\n"); + return -ENODEV; + } + isp->mmio_base_phys[res] = mem->start; + isp->mmio_size[res] = resource_size(mem); + + /* map the region */ + isp->mmio_base[res] = ioremap_nocache(isp->mmio_base_phys[res], + isp->mmio_size[res]); + if (!isp->mmio_base[res]) { + dev_err(isp->dev, "cannot map camera register I/O region\n"); + return -ENODEV; + } + + return 0; +} + +/* + * isp_probe - Probe ISP platform device + * @pdev: Pointer to ISP platform device + * + * Returns 0 if successful, + * -ENOMEM if no memory available, + * -ENODEV if no platform device resources found + * or no space for remapping registers, + * -EINVAL if couldn't install ISR, + * or clk_get return error value. + */ +static int isp_probe(struct platform_device *pdev) +{ + struct isp_platform_data *pdata = pdev->dev.platform_data; + struct isp_device *isp; + int ret; + int i, m; + + if (pdata == NULL) + return -EINVAL; + + isp = kzalloc(sizeof(*isp), GFP_KERNEL); + if (!isp) { + dev_err(&pdev->dev, "could not allocate memory\n"); + return -ENOMEM; + } + + isp->autoidle = autoidle; + isp->platform_cb.set_xclk = isp_set_xclk; + isp->platform_cb.set_pixel_clock = isp_set_pixel_clock; + + mutex_init(&isp->isp_mutex); + spin_lock_init(&isp->stat_lock); + + isp->dev = &pdev->dev; + isp->pdata = pdata; + isp->ref_count = 0; + + isp->raw_dmamask = DMA_BIT_MASK(32); + isp->dev->dma_mask = &isp->raw_dmamask; + isp->dev->coherent_dma_mask = DMA_BIT_MASK(32); + + platform_set_drvdata(pdev, isp); + + /* Regulators */ + isp->isp_csiphy1.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY1"); + isp->isp_csiphy2.vdd = regulator_get(&pdev->dev, "VDD_CSIPHY2"); + + /* Clocks */ + ret = isp_map_mem_resource(pdev, isp, OMAP3_ISP_IOMEM_MAIN); + if (ret < 0) + goto error; + + ret = isp_get_clocks(isp); + if (ret < 0) + goto error; + + if (omap3isp_get(isp) == NULL) + goto error; + + ret = isp_reset(isp); + if (ret < 0) + goto error_isp; + + /* Memory resources */ + isp->revision = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); + dev_info(isp->dev, "Revision %d.%d found\n", + (isp->revision & 0xf0) >> 4, isp->revision & 0x0f); + + for (m = 0; m < ARRAY_SIZE(isp_res_maps); m++) + if (isp->revision == isp_res_maps[m].isp_rev) + break; + + if (m == ARRAY_SIZE(isp_res_maps)) { + dev_err(isp->dev, "No resource map found for ISP rev %d.%d\n", + (isp->revision & 0xf0) >> 4, isp->revision & 0xf); + ret = -ENODEV; + goto error_isp; + } + + for (i = 1; i < OMAP3_ISP_IOMEM_LAST; i++) { + if (isp_res_maps[m].map & 1 << i) { + ret = isp_map_mem_resource(pdev, isp, i); + if (ret) + goto error_isp; + } + } + + /* IOMMU */ + isp->iommu = iommu_get("isp"); + if (IS_ERR_OR_NULL(isp->iommu)) { + isp->iommu = NULL; + ret = -ENODEV; + goto error_isp; + } + + /* Interrupt */ + isp->irq_num = platform_get_irq(pdev, 0); + if (isp->irq_num <= 0) { + dev_err(isp->dev, "No IRQ resource\n"); + ret = -ENODEV; + goto error_isp; + } + + if (request_irq(isp->irq_num, isp_isr, IRQF_SHARED, "OMAP3 ISP", isp)) { + dev_err(isp->dev, "Unable to request IRQ\n"); + ret = -EINVAL; + goto error_isp; + } + + /* Entities */ + ret = isp_initialize_modules(isp); + if (ret < 0) + goto error_irq; + + ret = isp_register_entities(isp); + if (ret < 0) + goto error_modules; + + isp_power_settings(isp, 1); + omap3isp_put(isp); + + return 0; + +error_modules: + isp_cleanup_modules(isp); +error_irq: + free_irq(isp->irq_num, isp); +error_isp: + iommu_put(isp->iommu); + omap3isp_put(isp); +error: + isp_put_clocks(isp); + + for (i = 0; i < OMAP3_ISP_IOMEM_LAST; i++) { + if (isp->mmio_base[i]) { + iounmap(isp->mmio_base[i]); + isp->mmio_base[i] = NULL; + } + + if (isp->mmio_base_phys[i]) { + release_mem_region(isp->mmio_base_phys[i], + isp->mmio_size[i]); + isp->mmio_base_phys[i] = 0; + } + } + regulator_put(isp->isp_csiphy2.vdd); + regulator_put(isp->isp_csiphy1.vdd); + platform_set_drvdata(pdev, NULL); + kfree(isp); + + return ret; +} + +static const struct dev_pm_ops omap3isp_pm_ops = { + .prepare = isp_pm_prepare, + .suspend = isp_pm_suspend, + .resume = isp_pm_resume, + .complete = isp_pm_complete, +}; + +static struct platform_device_id omap3isp_id_table[] = { + { "omap3isp", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, omap3isp_id_table); + +static struct platform_driver omap3isp_driver = { + .probe = isp_probe, + .remove = isp_remove, + .id_table = omap3isp_id_table, + .driver = { + .owner = THIS_MODULE, + .name = "omap3isp", + .pm = &omap3isp_pm_ops, + }, +}; + +/* + * isp_init - ISP module initialization. + */ +static int __init isp_init(void) +{ + return platform_driver_register(&omap3isp_driver); +} + +/* + * isp_cleanup - ISP module cleanup. + */ +static void __exit isp_cleanup(void) +{ + platform_driver_unregister(&omap3isp_driver); +} + +module_init(isp_init); +module_exit(isp_cleanup); + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("TI OMAP3 ISP driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h new file mode 100644 index 000000000000..cf5214e95a92 --- /dev/null +++ b/drivers/media/video/omap3isp/isp.h @@ -0,0 +1,431 @@ +/* + * isp.h + * + * TI OMAP3 ISP - Core + * + * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CORE_H +#define OMAP3_ISP_CORE_H + +#include <media/v4l2-device.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/wait.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> + +#include "ispstat.h" +#include "ispccdc.h" +#include "ispreg.h" +#include "ispresizer.h" +#include "isppreview.h" +#include "ispcsiphy.h" +#include "ispcsi2.h" +#include "ispccp2.h" + +#define IOMMU_FLAG (IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_8) + +#define ISP_TOK_TERM 0xFFFFFFFF /* + * terminating token for ISP + * modules reg list + */ +#define to_isp_device(ptr_module) \ + container_of(ptr_module, struct isp_device, isp_##ptr_module) +#define to_device(ptr_module) \ + (to_isp_device(ptr_module)->dev) + +enum isp_mem_resources { + OMAP3_ISP_IOMEM_MAIN, + OMAP3_ISP_IOMEM_CCP2, + OMAP3_ISP_IOMEM_CCDC, + OMAP3_ISP_IOMEM_HIST, + OMAP3_ISP_IOMEM_H3A, + OMAP3_ISP_IOMEM_PREV, + OMAP3_ISP_IOMEM_RESZ, + OMAP3_ISP_IOMEM_SBL, + OMAP3_ISP_IOMEM_CSI2A_REGS1, + OMAP3_ISP_IOMEM_CSIPHY2, + OMAP3_ISP_IOMEM_CSI2A_REGS2, + OMAP3_ISP_IOMEM_CSI2C_REGS1, + OMAP3_ISP_IOMEM_CSIPHY1, + OMAP3_ISP_IOMEM_CSI2C_REGS2, + OMAP3_ISP_IOMEM_LAST +}; + +enum isp_sbl_resource { + OMAP3_ISP_SBL_CSI1_READ = 0x1, + OMAP3_ISP_SBL_CSI1_WRITE = 0x2, + OMAP3_ISP_SBL_CSI2A_WRITE = 0x4, + OMAP3_ISP_SBL_CSI2C_WRITE = 0x8, + OMAP3_ISP_SBL_CCDC_LSC_READ = 0x10, + OMAP3_ISP_SBL_CCDC_WRITE = 0x20, + OMAP3_ISP_SBL_PREVIEW_READ = 0x40, + OMAP3_ISP_SBL_PREVIEW_WRITE = 0x80, + OMAP3_ISP_SBL_RESIZER_READ = 0x100, + OMAP3_ISP_SBL_RESIZER_WRITE = 0x200, +}; + +enum isp_subclk_resource { + OMAP3_ISP_SUBCLK_CCDC = (1 << 0), + OMAP3_ISP_SUBCLK_H3A = (1 << 1), + OMAP3_ISP_SUBCLK_HIST = (1 << 2), + OMAP3_ISP_SUBCLK_PREVIEW = (1 << 3), + OMAP3_ISP_SUBCLK_RESIZER = (1 << 4), +}; + +enum isp_interface_type { + ISP_INTERFACE_PARALLEL, + ISP_INTERFACE_CSI2A_PHY2, + ISP_INTERFACE_CCP2B_PHY1, + ISP_INTERFACE_CCP2B_PHY2, + ISP_INTERFACE_CSI2C_PHY1, +}; + +/* ISP: OMAP 34xx ES 1.0 */ +#define ISP_REVISION_1_0 0x10 +/* ISP2: OMAP 34xx ES 2.0, 2.1 and 3.0 */ +#define ISP_REVISION_2_0 0x20 +/* ISP2P: OMAP 36xx */ +#define ISP_REVISION_15_0 0xF0 + +/* + * struct isp_res_mapping - Map ISP io resources to ISP revision. + * @isp_rev: ISP_REVISION_x_x + * @map: bitmap for enum isp_mem_resources + */ +struct isp_res_mapping { + u32 isp_rev; + u32 map; +}; + +/* + * struct isp_reg - Structure for ISP register values. + * @reg: 32-bit Register address. + * @val: 32-bit Register value. + */ +struct isp_reg { + enum isp_mem_resources mmio_range; + u32 reg; + u32 val; +}; + +/** + * struct isp_parallel_platform_data - Parallel interface platform data + * @width: Parallel bus width in bits (8, 10, 11 or 12) + * @data_lane_shift: Data lane shifter + * 0 - CAMEXT[13:0] -> CAM[13:0] + * 1 - CAMEXT[13:2] -> CAM[11:0] + * 2 - CAMEXT[13:4] -> CAM[9:0] + * 3 - CAMEXT[13:6] -> CAM[7:0] + * @clk_pol: Pixel clock polarity + * 0 - Non Inverted, 1 - Inverted + * @bridge: CCDC Bridge input control + * ISPCTRL_PAR_BRIDGE_DISABLE - Disable + * ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian + * ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian + */ +struct isp_parallel_platform_data { + unsigned int width; + unsigned int data_lane_shift:2; + unsigned int clk_pol:1; + unsigned int bridge:4; +}; + +/** + * struct isp_ccp2_platform_data - CCP2 interface platform data + * @strobe_clk_pol: Strobe/clock polarity + * 0 - Non Inverted, 1 - Inverted + * @crc: Enable the cyclic redundancy check + * @ccp2_mode: Enable CCP2 compatibility mode + * 0 - MIPI-CSI1 mode, 1 - CCP2 mode + * @phy_layer: Physical layer selection + * ISPCCP2_CTRL_PHY_SEL_CLOCK - Data/clock physical layer + * ISPCCP2_CTRL_PHY_SEL_STROBE - Data/strobe physical layer + * @vpclk_div: Video port output clock control + */ +struct isp_ccp2_platform_data { + unsigned int strobe_clk_pol:1; + unsigned int crc:1; + unsigned int ccp2_mode:1; + unsigned int phy_layer:1; + unsigned int vpclk_div:2; +}; + +/** + * struct isp_csi2_platform_data - CSI2 interface platform data + * @crc: Enable the cyclic redundancy check + * @vpclk_div: Video port output clock control + */ +struct isp_csi2_platform_data { + unsigned crc:1; + unsigned vpclk_div:2; +}; + +struct isp_subdev_i2c_board_info { + struct i2c_board_info *board_info; + int i2c_adapter_id; +}; + +struct isp_v4l2_subdevs_group { + struct isp_subdev_i2c_board_info *subdevs; + enum isp_interface_type interface; + union { + struct isp_parallel_platform_data parallel; + struct isp_ccp2_platform_data ccp2; + struct isp_csi2_platform_data csi2; + } bus; /* gcc < 4.6.0 chokes on anonymous union initializers */ +}; + +struct isp_platform_data { + struct isp_v4l2_subdevs_group *subdevs; + void (*set_constraints)(struct isp_device *isp, bool enable); +}; + +struct isp_platform_callback { + u32 (*set_xclk)(struct isp_device *isp, u32 xclk, u8 xclksel); + int (*csiphy_config)(struct isp_csiphy *phy, + struct isp_csiphy_dphy_cfg *dphy, + struct isp_csiphy_lanes_cfg *lanes); + void (*set_pixel_clock)(struct isp_device *isp, unsigned int pixelclk); +}; + +/* + * struct isp_device - ISP device structure. + * @dev: Device pointer specific to the OMAP3 ISP. + * @revision: Stores current ISP module revision. + * @irq_num: Currently used IRQ number. + * @mmio_base: Array with kernel base addresses for ioremapped ISP register + * regions. + * @mmio_base_phys: Array with physical L4 bus addresses for ISP register + * regions. + * @mmio_size: Array with ISP register regions size in bytes. + * @raw_dmamask: Raw DMA mask + * @stat_lock: Spinlock for handling statistics + * @isp_mutex: Mutex for serializing requests to ISP. + * @has_context: Context has been saved at least once and can be restored. + * @ref_count: Reference count for handling multiple ISP requests. + * @cam_ick: Pointer to camera interface clock structure. + * @cam_mclk: Pointer to camera functional clock structure. + * @dpll4_m5_ck: Pointer to DPLL4 M5 clock structure. + * @csi2_fck: Pointer to camera CSI2 complexIO clock structure. + * @l3_ick: Pointer to OMAP3 L3 bus interface clock. + * @irq: Currently attached ISP ISR callbacks information structure. + * @isp_af: Pointer to current settings for ISP AutoFocus SCM. + * @isp_hist: Pointer to current settings for ISP Histogram SCM. + * @isp_h3a: Pointer to current settings for ISP Auto Exposure and + * White Balance SCM. + * @isp_res: Pointer to current settings for ISP Resizer. + * @isp_prev: Pointer to current settings for ISP Preview. + * @isp_ccdc: Pointer to current settings for ISP CCDC. + * @iommu: Pointer to requested IOMMU instance for ISP. + * @platform_cb: ISP driver callback function pointers for platform code + * + * This structure is used to store the OMAP ISP Information. + */ +struct isp_device { + struct v4l2_device v4l2_dev; + struct media_device media_dev; + struct device *dev; + u32 revision; + + /* platform HW resources */ + struct isp_platform_data *pdata; + unsigned int irq_num; + + void __iomem *mmio_base[OMAP3_ISP_IOMEM_LAST]; + unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_LAST]; + resource_size_t mmio_size[OMAP3_ISP_IOMEM_LAST]; + + u64 raw_dmamask; + + /* ISP Obj */ + spinlock_t stat_lock; /* common lock for statistic drivers */ + struct mutex isp_mutex; /* For handling ref_count field */ + int has_context; + int ref_count; + unsigned int autoidle; + u32 xclk_divisor[2]; /* Two clocks, a and b. */ +#define ISP_CLK_CAM_ICK 0 +#define ISP_CLK_CAM_MCLK 1 +#define ISP_CLK_DPLL4_M5_CK 2 +#define ISP_CLK_CSI2_FCK 3 +#define ISP_CLK_L3_ICK 4 + struct clk *clock[5]; + + /* ISP modules */ + struct ispstat isp_af; + struct ispstat isp_aewb; + struct ispstat isp_hist; + struct isp_res_device isp_res; + struct isp_prev_device isp_prev; + struct isp_ccdc_device isp_ccdc; + struct isp_csi2_device isp_csi2a; + struct isp_csi2_device isp_csi2c; + struct isp_ccp2_device isp_ccp2; + struct isp_csiphy isp_csiphy1; + struct isp_csiphy isp_csiphy2; + + unsigned int sbl_resources; + unsigned int subclk_resources; + + struct iommu *iommu; + + struct isp_platform_callback platform_cb; +}; + +#define v4l2_dev_to_isp_device(dev) \ + container_of(dev, struct isp_device, v4l2_dev) + +void omap3isp_hist_dma_done(struct isp_device *isp); + +void omap3isp_flush(struct isp_device *isp); + +int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, + atomic_t *stopping); + +int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait, + atomic_t *stopping); + +int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, + enum isp_pipeline_stream_state state); +void omap3isp_configure_bridge(struct isp_device *isp, + enum ccdc_input_entity input, + const struct isp_parallel_platform_data *pdata); + +#define ISP_XCLK_NONE -1 +#define ISP_XCLK_A 0 +#define ISP_XCLK_B 1 + +struct isp_device *omap3isp_get(struct isp_device *isp); +void omap3isp_put(struct isp_device *isp); + +void omap3isp_print_status(struct isp_device *isp); + +void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res); +void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res); + +void omap3isp_subclk_enable(struct isp_device *isp, + enum isp_subclk_resource res); +void omap3isp_subclk_disable(struct isp_device *isp, + enum isp_subclk_resource res); + +int omap3isp_pipeline_pm_use(struct media_entity *entity, int use); + +int omap3isp_register_entities(struct platform_device *pdev, + struct v4l2_device *v4l2_dev); +void omap3isp_unregister_entities(struct platform_device *pdev); + +/* + * isp_reg_readl - Read value of an OMAP3 ISP register + * @dev: Device pointer specific to the OMAP3 ISP. + * @isp_mmio_range: Range to which the register offset refers to. + * @reg_offset: Register offset to read from. + * + * Returns an unsigned 32 bit value with the required register contents. + */ +static inline +u32 isp_reg_readl(struct isp_device *isp, enum isp_mem_resources isp_mmio_range, + u32 reg_offset) +{ + return __raw_readl(isp->mmio_base[isp_mmio_range] + reg_offset); +} + +/* + * isp_reg_writel - Write value to an OMAP3 ISP register + * @dev: Device pointer specific to the OMAP3 ISP. + * @reg_value: 32 bit value to write to the register. + * @isp_mmio_range: Range to which the register offset refers to. + * @reg_offset: Register offset to write into. + */ +static inline +void isp_reg_writel(struct isp_device *isp, u32 reg_value, + enum isp_mem_resources isp_mmio_range, u32 reg_offset) +{ + __raw_writel(reg_value, isp->mmio_base[isp_mmio_range] + reg_offset); +} + +/* + * isp_reg_and - Clear individual bits in an OMAP3 ISP register + * @dev: Device pointer specific to the OMAP3 ISP. + * @mmio_range: Range to which the register offset refers to. + * @reg: Register offset to work on. + * @clr_bits: 32 bit value which would be cleared in the register. + */ +static inline +void isp_reg_clr(struct isp_device *isp, enum isp_mem_resources mmio_range, + u32 reg, u32 clr_bits) +{ + u32 v = isp_reg_readl(isp, mmio_range, reg); + + isp_reg_writel(isp, v & ~clr_bits, mmio_range, reg); +} + +/* + * isp_reg_set - Set individual bits in an OMAP3 ISP register + * @dev: Device pointer specific to the OMAP3 ISP. + * @mmio_range: Range to which the register offset refers to. + * @reg: Register offset to work on. + * @set_bits: 32 bit value which would be set in the register. + */ +static inline +void isp_reg_set(struct isp_device *isp, enum isp_mem_resources mmio_range, + u32 reg, u32 set_bits) +{ + u32 v = isp_reg_readl(isp, mmio_range, reg); + + isp_reg_writel(isp, v | set_bits, mmio_range, reg); +} + +/* + * isp_reg_clr_set - Clear and set invidial bits in an OMAP3 ISP register + * @dev: Device pointer specific to the OMAP3 ISP. + * @mmio_range: Range to which the register offset refers to. + * @reg: Register offset to work on. + * @clr_bits: 32 bit value which would be cleared in the register. + * @set_bits: 32 bit value which would be set in the register. + * + * The clear operation is done first, and then the set operation. + */ +static inline +void isp_reg_clr_set(struct isp_device *isp, enum isp_mem_resources mmio_range, + u32 reg, u32 clr_bits, u32 set_bits) +{ + u32 v = isp_reg_readl(isp, mmio_range, reg); + + isp_reg_writel(isp, (v & ~clr_bits) | set_bits, mmio_range, reg); +} + +static inline enum v4l2_buf_type +isp_pad_buffer_type(const struct v4l2_subdev *subdev, int pad) +{ + if (pad >= subdev->entity.num_pads) + return 0; + + if (subdev->entity.pads[pad].flags & MEDIA_PAD_FL_SINK) + return V4L2_BUF_TYPE_VIDEO_OUTPUT; + else + return V4L2_BUF_TYPE_VIDEO_CAPTURE; +} + +#endif /* OMAP3_ISP_CORE_H */ diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c new file mode 100644 index 000000000000..5ff9d14ce710 --- /dev/null +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -0,0 +1,2268 @@ +/* + * ispccdc.c + * + * TI OMAP3 ISP - CCDC module + * + * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <media/v4l2-event.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispccdc.h" + +static struct v4l2_mbus_framefmt * +__ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which); + +static const unsigned int ccdc_fmts[] = { + V4L2_MBUS_FMT_Y8_1X8, + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGRBG12_1X12, + V4L2_MBUS_FMT_SRGGB12_1X12, + V4L2_MBUS_FMT_SBGGR12_1X12, + V4L2_MBUS_FMT_SGBRG12_1X12, +}; + +/* + * ccdc_print_status - Print current CCDC Module register values. + * @ccdc: Pointer to ISP CCDC device. + * + * Also prints other debug information stored in the CCDC module. + */ +#define CCDC_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###CCDC " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_##name)) + +static void ccdc_print_status(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + dev_dbg(isp->dev, "-------------CCDC Register dump-------------\n"); + + CCDC_PRINT_REGISTER(isp, PCR); + CCDC_PRINT_REGISTER(isp, SYN_MODE); + CCDC_PRINT_REGISTER(isp, HD_VD_WID); + CCDC_PRINT_REGISTER(isp, PIX_LINES); + CCDC_PRINT_REGISTER(isp, HORZ_INFO); + CCDC_PRINT_REGISTER(isp, VERT_START); + CCDC_PRINT_REGISTER(isp, VERT_LINES); + CCDC_PRINT_REGISTER(isp, CULLING); + CCDC_PRINT_REGISTER(isp, HSIZE_OFF); + CCDC_PRINT_REGISTER(isp, SDOFST); + CCDC_PRINT_REGISTER(isp, SDR_ADDR); + CCDC_PRINT_REGISTER(isp, CLAMP); + CCDC_PRINT_REGISTER(isp, DCSUB); + CCDC_PRINT_REGISTER(isp, COLPTN); + CCDC_PRINT_REGISTER(isp, BLKCMP); + CCDC_PRINT_REGISTER(isp, FPC); + CCDC_PRINT_REGISTER(isp, FPC_ADDR); + CCDC_PRINT_REGISTER(isp, VDINT); + CCDC_PRINT_REGISTER(isp, ALAW); + CCDC_PRINT_REGISTER(isp, REC656IF); + CCDC_PRINT_REGISTER(isp, CFG); + CCDC_PRINT_REGISTER(isp, FMTCFG); + CCDC_PRINT_REGISTER(isp, FMT_HORZ); + CCDC_PRINT_REGISTER(isp, FMT_VERT); + CCDC_PRINT_REGISTER(isp, PRGEVEN0); + CCDC_PRINT_REGISTER(isp, PRGEVEN1); + CCDC_PRINT_REGISTER(isp, PRGODD0); + CCDC_PRINT_REGISTER(isp, PRGODD1); + CCDC_PRINT_REGISTER(isp, VP_OUT); + CCDC_PRINT_REGISTER(isp, LSC_CONFIG); + CCDC_PRINT_REGISTER(isp, LSC_INITIAL); + CCDC_PRINT_REGISTER(isp, LSC_TABLE_BASE); + CCDC_PRINT_REGISTER(isp, LSC_TABLE_OFFSET); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * omap3isp_ccdc_busy - Get busy state of the CCDC. + * @ccdc: Pointer to ISP CCDC device. + */ +int omap3isp_ccdc_busy(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR) & + ISPCCDC_PCR_BUSY; +} + +/* ----------------------------------------------------------------------------- + * Lens Shading Compensation + */ + +/* + * ccdc_lsc_validate_config - Check that LSC configuration is valid. + * @ccdc: Pointer to ISP CCDC device. + * @lsc_cfg: the LSC configuration to check. + * + * Returns 0 if the LSC configuration is valid, or -EINVAL if invalid. + */ +static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc, + struct omap3isp_ccdc_lsc_config *lsc_cfg) +{ + struct isp_device *isp = to_isp_device(ccdc); + struct v4l2_mbus_framefmt *format; + unsigned int paxel_width, paxel_height; + unsigned int paxel_shift_x, paxel_shift_y; + unsigned int min_width, min_height, min_size; + unsigned int input_width, input_height; + + paxel_shift_x = lsc_cfg->gain_mode_m; + paxel_shift_y = lsc_cfg->gain_mode_n; + + if ((paxel_shift_x < 2) || (paxel_shift_x > 6) || + (paxel_shift_y < 2) || (paxel_shift_y > 6)) { + dev_dbg(isp->dev, "CCDC: LSC: Invalid paxel size\n"); + return -EINVAL; + } + + if (lsc_cfg->offset & 3) { + dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of " + "4\n"); + return -EINVAL; + } + + if ((lsc_cfg->initial_x & 1) || (lsc_cfg->initial_y & 1)) { + dev_dbg(isp->dev, "CCDC: LSC: initial_x and y must be even\n"); + return -EINVAL; + } + + format = __ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK, + V4L2_SUBDEV_FORMAT_ACTIVE); + input_width = format->width; + input_height = format->height; + + /* Calculate minimum bytesize for validation */ + paxel_width = 1 << paxel_shift_x; + min_width = ((input_width + lsc_cfg->initial_x + paxel_width - 1) + >> paxel_shift_x) + 1; + + paxel_height = 1 << paxel_shift_y; + min_height = ((input_height + lsc_cfg->initial_y + paxel_height - 1) + >> paxel_shift_y) + 1; + + min_size = 4 * min_width * min_height; + if (min_size > lsc_cfg->size) { + dev_dbg(isp->dev, "CCDC: LSC: too small table\n"); + return -EINVAL; + } + if (lsc_cfg->offset < (min_width * 4)) { + dev_dbg(isp->dev, "CCDC: LSC: Offset is too small\n"); + return -EINVAL; + } + if ((lsc_cfg->size / lsc_cfg->offset) < min_height) { + dev_dbg(isp->dev, "CCDC: LSC: Wrong size/offset combination\n"); + return -EINVAL; + } + return 0; +} + +/* + * ccdc_lsc_program_table - Program Lens Shading Compensation table address. + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_lsc_program_table(struct isp_ccdc_device *ccdc, u32 addr) +{ + isp_reg_writel(to_isp_device(ccdc), addr, + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_BASE); +} + +/* + * ccdc_lsc_setup_regs - Configures the lens shading compensation module + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_lsc_setup_regs(struct isp_ccdc_device *ccdc, + struct omap3isp_ccdc_lsc_config *cfg) +{ + struct isp_device *isp = to_isp_device(ccdc); + int reg; + + isp_reg_writel(isp, cfg->offset, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_LSC_TABLE_OFFSET); + + reg = 0; + reg |= cfg->gain_mode_n << ISPCCDC_LSC_GAIN_MODE_N_SHIFT; + reg |= cfg->gain_mode_m << ISPCCDC_LSC_GAIN_MODE_M_SHIFT; + reg |= cfg->gain_format << ISPCCDC_LSC_GAIN_FORMAT_SHIFT; + isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG); + + reg = 0; + reg &= ~ISPCCDC_LSC_INITIAL_X_MASK; + reg |= cfg->initial_x << ISPCCDC_LSC_INITIAL_X_SHIFT; + reg &= ~ISPCCDC_LSC_INITIAL_Y_MASK; + reg |= cfg->initial_y << ISPCCDC_LSC_INITIAL_Y_SHIFT; + isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_LSC_INITIAL); +} + +static int ccdc_lsc_wait_prefetch(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + unsigned int wait; + + isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ, + OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); + + /* timeout 1 ms */ + for (wait = 0; wait < 1000; wait++) { + if (isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS) & + IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ) { + isp_reg_writel(isp, IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ, + OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); + return 0; + } + + rmb(); + udelay(1); + } + + return -ETIMEDOUT; +} + +/* + * __ccdc_lsc_enable - Enables/Disables the Lens Shading Compensation module. + * @ccdc: Pointer to ISP CCDC device. + * @enable: 0 Disables LSC, 1 Enables LSC. + */ +static int __ccdc_lsc_enable(struct isp_ccdc_device *ccdc, int enable) +{ + struct isp_device *isp = to_isp_device(ccdc); + const struct v4l2_mbus_framefmt *format = + __ccdc_get_format(ccdc, NULL, CCDC_PAD_SINK, + V4L2_SUBDEV_FORMAT_ACTIVE); + + if ((format->code != V4L2_MBUS_FMT_SGRBG10_1X10) && + (format->code != V4L2_MBUS_FMT_SRGGB10_1X10) && + (format->code != V4L2_MBUS_FMT_SBGGR10_1X10) && + (format->code != V4L2_MBUS_FMT_SGBRG10_1X10)) + return -EINVAL; + + if (enable) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_LSC_READ); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG, + ISPCCDC_LSC_ENABLE, enable ? ISPCCDC_LSC_ENABLE : 0); + + if (enable) { + if (ccdc_lsc_wait_prefetch(ccdc) < 0) { + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_LSC_CONFIG, ISPCCDC_LSC_ENABLE); + ccdc->lsc.state = LSC_STATE_STOPPED; + dev_warn(to_device(ccdc), "LSC prefecth timeout\n"); + return -ETIMEDOUT; + } + ccdc->lsc.state = LSC_STATE_RUNNING; + } else { + ccdc->lsc.state = LSC_STATE_STOPPING; + } + + return 0; +} + +static int ccdc_lsc_busy(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + return isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG) & + ISPCCDC_LSC_BUSY; +} + +/* __ccdc_lsc_configure - Apply a new configuration to the LSC engine + * @ccdc: Pointer to ISP CCDC device + * @req: New configuration request + * + * context: in_interrupt() + */ +static int __ccdc_lsc_configure(struct isp_ccdc_device *ccdc, + struct ispccdc_lsc_config_req *req) +{ + if (!req->enable) + return -EINVAL; + + if (ccdc_lsc_validate_config(ccdc, &req->config) < 0) { + dev_dbg(to_device(ccdc), "Discard LSC configuration\n"); + return -EINVAL; + } + + if (ccdc_lsc_busy(ccdc)) + return -EBUSY; + + ccdc_lsc_setup_regs(ccdc, &req->config); + ccdc_lsc_program_table(ccdc, req->table); + return 0; +} + +/* + * ccdc_lsc_error_handler - Handle LSC prefetch error scenario. + * @ccdc: Pointer to ISP CCDC device. + * + * Disables LSC, and defers enablement to shadow registers update time. + */ +static void ccdc_lsc_error_handler(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + /* + * From OMAP3 TRM: When this event is pending, the module + * goes into transparent mode (output =input). Normal + * operation can be resumed at the start of the next frame + * after: + * 1) Clearing this event + * 2) Disabling the LSC module + * 3) Enabling it + */ + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG, + ISPCCDC_LSC_ENABLE); + ccdc->lsc.state = LSC_STATE_STOPPED; +} + +static void ccdc_lsc_free_request(struct isp_ccdc_device *ccdc, + struct ispccdc_lsc_config_req *req) +{ + struct isp_device *isp = to_isp_device(ccdc); + + if (req == NULL) + return; + + if (req->iovm) + dma_unmap_sg(isp->dev, req->iovm->sgt->sgl, + req->iovm->sgt->nents, DMA_TO_DEVICE); + if (req->table) + iommu_vfree(isp->iommu, req->table); + kfree(req); +} + +static void ccdc_lsc_free_queue(struct isp_ccdc_device *ccdc, + struct list_head *queue) +{ + struct ispccdc_lsc_config_req *req, *n; + unsigned long flags; + + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + list_for_each_entry_safe(req, n, queue, list) { + list_del(&req->list); + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); + ccdc_lsc_free_request(ccdc, req); + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + } + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); +} + +static void ccdc_lsc_free_table_work(struct work_struct *work) +{ + struct isp_ccdc_device *ccdc; + struct ispccdc_lsc *lsc; + + lsc = container_of(work, struct ispccdc_lsc, table_work); + ccdc = container_of(lsc, struct isp_ccdc_device, lsc); + + ccdc_lsc_free_queue(ccdc, &lsc->free_queue); +} + +/* + * ccdc_lsc_config - Configure the LSC module from a userspace request + * + * Store the request LSC configuration in the LSC engine request pointer. The + * configuration will be applied to the hardware when the CCDC will be enabled, + * or at the next LSC interrupt if the CCDC is already running. + */ +static int ccdc_lsc_config(struct isp_ccdc_device *ccdc, + struct omap3isp_ccdc_update_config *config) +{ + struct isp_device *isp = to_isp_device(ccdc); + struct ispccdc_lsc_config_req *req; + unsigned long flags; + void *table; + u16 update; + int ret; + + update = config->update & + (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC); + if (!update) + return 0; + + if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) { + dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table " + "need to be supplied\n", __func__); + return -EINVAL; + } + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (req == NULL) + return -ENOMEM; + + if (config->flag & OMAP3ISP_CCDC_CONFIG_LSC) { + if (copy_from_user(&req->config, config->lsc_cfg, + sizeof(req->config))) { + ret = -EFAULT; + goto done; + } + + req->enable = 1; + + req->table = iommu_vmalloc(isp->iommu, 0, req->config.size, + IOMMU_FLAG); + if (IS_ERR_VALUE(req->table)) { + req->table = 0; + ret = -ENOMEM; + goto done; + } + + req->iovm = find_iovm_area(isp->iommu, req->table); + if (req->iovm == NULL) { + ret = -ENOMEM; + goto done; + } + + if (!dma_map_sg(isp->dev, req->iovm->sgt->sgl, + req->iovm->sgt->nents, DMA_TO_DEVICE)) { + ret = -ENOMEM; + req->iovm = NULL; + goto done; + } + + dma_sync_sg_for_cpu(isp->dev, req->iovm->sgt->sgl, + req->iovm->sgt->nents, DMA_TO_DEVICE); + + table = da_to_va(isp->iommu, req->table); + if (copy_from_user(table, config->lsc, req->config.size)) { + ret = -EFAULT; + goto done; + } + + dma_sync_sg_for_device(isp->dev, req->iovm->sgt->sgl, + req->iovm->sgt->nents, DMA_TO_DEVICE); + } + + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + if (ccdc->lsc.request) { + list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue); + schedule_work(&ccdc->lsc.table_work); + } + ccdc->lsc.request = req; + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); + + ret = 0; + +done: + if (ret < 0) + ccdc_lsc_free_request(ccdc, req); + + return ret; +} + +static inline int ccdc_lsc_is_configured(struct isp_ccdc_device *ccdc) +{ + unsigned long flags; + + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + if (ccdc->lsc.active) { + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); + return 1; + } + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); + return 0; +} + +static int ccdc_lsc_enable(struct isp_ccdc_device *ccdc) +{ + struct ispccdc_lsc *lsc = &ccdc->lsc; + + if (lsc->state != LSC_STATE_STOPPED) + return -EINVAL; + + if (lsc->active) { + list_add_tail(&lsc->active->list, &lsc->free_queue); + lsc->active = NULL; + } + + if (__ccdc_lsc_configure(ccdc, lsc->request) < 0) { + omap3isp_sbl_disable(to_isp_device(ccdc), + OMAP3_ISP_SBL_CCDC_LSC_READ); + list_add_tail(&lsc->request->list, &lsc->free_queue); + lsc->request = NULL; + goto done; + } + + lsc->active = lsc->request; + lsc->request = NULL; + __ccdc_lsc_enable(ccdc, 1); + +done: + if (!list_empty(&lsc->free_queue)) + schedule_work(&lsc->table_work); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Parameters configuration + */ + +/* + * ccdc_configure_clamp - Configure optical-black or digital clamping + * @ccdc: Pointer to ISP CCDC device. + * + * The CCDC performs either optical-black or digital clamp. Configure and enable + * the selected clamp method. + */ +static void ccdc_configure_clamp(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + u32 clamp; + + if (ccdc->obclamp) { + clamp = ccdc->clamp.obgain << ISPCCDC_CLAMP_OBGAIN_SHIFT; + clamp |= ccdc->clamp.oblen << ISPCCDC_CLAMP_OBSLEN_SHIFT; + clamp |= ccdc->clamp.oblines << ISPCCDC_CLAMP_OBSLN_SHIFT; + clamp |= ccdc->clamp.obstpixel << ISPCCDC_CLAMP_OBST_SHIFT; + isp_reg_writel(isp, clamp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP); + } else { + isp_reg_writel(isp, ccdc->clamp.dcsubval, + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_DCSUB); + } + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP, + ISPCCDC_CLAMP_CLAMPEN, + ccdc->obclamp ? ISPCCDC_CLAMP_CLAMPEN : 0); +} + +/* + * ccdc_configure_fpc - Configure Faulty Pixel Correction + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_configure_fpc(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC, ISPCCDC_FPC_FPCEN); + + if (!ccdc->fpc_en) + return; + + isp_reg_writel(isp, ccdc->fpc.fpcaddr, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_FPC_ADDR); + /* The FPNUM field must be set before enabling FPC. */ + isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC); + isp_reg_writel(isp, (ccdc->fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT) | + ISPCCDC_FPC_FPCEN, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC); +} + +/* + * ccdc_configure_black_comp - Configure Black Level Compensation. + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_configure_black_comp(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + u32 blcomp; + + blcomp = ccdc->blcomp.b_mg << ISPCCDC_BLKCMP_B_MG_SHIFT; + blcomp |= ccdc->blcomp.gb_g << ISPCCDC_BLKCMP_GB_G_SHIFT; + blcomp |= ccdc->blcomp.gr_cy << ISPCCDC_BLKCMP_GR_CY_SHIFT; + blcomp |= ccdc->blcomp.r_ye << ISPCCDC_BLKCMP_R_YE_SHIFT; + + isp_reg_writel(isp, blcomp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_BLKCMP); +} + +/* + * ccdc_configure_lpf - Configure Low-Pass Filter (LPF). + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_configure_lpf(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE, + ISPCCDC_SYN_MODE_LPF, + ccdc->lpf ? ISPCCDC_SYN_MODE_LPF : 0); +} + +/* + * ccdc_configure_alaw - Configure A-law compression. + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_configure_alaw(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + u32 alaw = 0; + + switch (ccdc->syncif.datsz) { + case 8: + return; + + case 10: + alaw = ISPCCDC_ALAW_GWDI_9_0; + break; + case 11: + alaw = ISPCCDC_ALAW_GWDI_10_1; + break; + case 12: + alaw = ISPCCDC_ALAW_GWDI_11_2; + break; + case 13: + alaw = ISPCCDC_ALAW_GWDI_12_3; + break; + } + + if (ccdc->alaw) + alaw |= ISPCCDC_ALAW_CCDTBL; + + isp_reg_writel(isp, alaw, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW); +} + +/* + * ccdc_config_imgattr - Configure sensor image specific attributes. + * @ccdc: Pointer to ISP CCDC device. + * @colptn: Color pattern of the sensor. + */ +static void ccdc_config_imgattr(struct isp_ccdc_device *ccdc, u32 colptn) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_writel(isp, colptn, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN); +} + +/* + * ccdc_config - Set CCDC configuration from userspace + * @ccdc: Pointer to ISP CCDC device. + * @userspace_add: Structure containing CCDC configuration sent from userspace. + * + * Returns 0 if successful, -EINVAL if the pointer to the configuration + * structure is null, or the copy_from_user function fails to copy user space + * memory to kernel space memory. + */ +static int ccdc_config(struct isp_ccdc_device *ccdc, + struct omap3isp_ccdc_update_config *ccdc_struct) +{ + struct isp_device *isp = to_isp_device(ccdc); + unsigned long flags; + + spin_lock_irqsave(&ccdc->lock, flags); + ccdc->shadow_update = 1; + spin_unlock_irqrestore(&ccdc->lock, flags); + + if (OMAP3ISP_CCDC_ALAW & ccdc_struct->update) { + ccdc->alaw = !!(OMAP3ISP_CCDC_ALAW & ccdc_struct->flag); + ccdc->update |= OMAP3ISP_CCDC_ALAW; + } + + if (OMAP3ISP_CCDC_LPF & ccdc_struct->update) { + ccdc->lpf = !!(OMAP3ISP_CCDC_LPF & ccdc_struct->flag); + ccdc->update |= OMAP3ISP_CCDC_LPF; + } + + if (OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->update) { + if (copy_from_user(&ccdc->clamp, ccdc_struct->bclamp, + sizeof(ccdc->clamp))) { + ccdc->shadow_update = 0; + return -EFAULT; + } + + ccdc->obclamp = !!(OMAP3ISP_CCDC_BLCLAMP & ccdc_struct->flag); + ccdc->update |= OMAP3ISP_CCDC_BLCLAMP; + } + + if (OMAP3ISP_CCDC_BCOMP & ccdc_struct->update) { + if (copy_from_user(&ccdc->blcomp, ccdc_struct->blcomp, + sizeof(ccdc->blcomp))) { + ccdc->shadow_update = 0; + return -EFAULT; + } + + ccdc->update |= OMAP3ISP_CCDC_BCOMP; + } + + ccdc->shadow_update = 0; + + if (OMAP3ISP_CCDC_FPC & ccdc_struct->update) { + u32 table_old = 0; + u32 table_new; + u32 size; + + if (ccdc->state != ISP_PIPELINE_STREAM_STOPPED) + return -EBUSY; + + ccdc->fpc_en = !!(OMAP3ISP_CCDC_FPC & ccdc_struct->flag); + + if (ccdc->fpc_en) { + if (copy_from_user(&ccdc->fpc, ccdc_struct->fpc, + sizeof(ccdc->fpc))) + return -EFAULT; + + /* + * table_new must be 64-bytes aligned, but it's + * already done by iommu_vmalloc(). + */ + size = ccdc->fpc.fpnum * 4; + table_new = iommu_vmalloc(isp->iommu, 0, size, + IOMMU_FLAG); + if (IS_ERR_VALUE(table_new)) + return -ENOMEM; + + if (copy_from_user(da_to_va(isp->iommu, table_new), + (__force void __user *) + ccdc->fpc.fpcaddr, size)) { + iommu_vfree(isp->iommu, table_new); + return -EFAULT; + } + + table_old = ccdc->fpc.fpcaddr; + ccdc->fpc.fpcaddr = table_new; + } + + ccdc_configure_fpc(ccdc); + if (table_old != 0) + iommu_vfree(isp->iommu, table_old); + } + + return ccdc_lsc_config(ccdc, ccdc_struct); +} + +static void ccdc_apply_controls(struct isp_ccdc_device *ccdc) +{ + if (ccdc->update & OMAP3ISP_CCDC_ALAW) { + ccdc_configure_alaw(ccdc); + ccdc->update &= ~OMAP3ISP_CCDC_ALAW; + } + + if (ccdc->update & OMAP3ISP_CCDC_LPF) { + ccdc_configure_lpf(ccdc); + ccdc->update &= ~OMAP3ISP_CCDC_LPF; + } + + if (ccdc->update & OMAP3ISP_CCDC_BLCLAMP) { + ccdc_configure_clamp(ccdc); + ccdc->update &= ~OMAP3ISP_CCDC_BLCLAMP; + } + + if (ccdc->update & OMAP3ISP_CCDC_BCOMP) { + ccdc_configure_black_comp(ccdc); + ccdc->update &= ~OMAP3ISP_CCDC_BCOMP; + } +} + +/* + * omap3isp_ccdc_restore_context - Restore values of the CCDC module registers + * @dev: Pointer to ISP device + */ +void omap3isp_ccdc_restore_context(struct isp_device *isp) +{ + struct isp_ccdc_device *ccdc = &isp->isp_ccdc; + + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ISPCCDC_CFG_VDLC); + + ccdc->update = OMAP3ISP_CCDC_ALAW | OMAP3ISP_CCDC_LPF + | OMAP3ISP_CCDC_BLCLAMP | OMAP3ISP_CCDC_BCOMP; + ccdc_apply_controls(ccdc); + ccdc_configure_fpc(ccdc); +} + +/* ----------------------------------------------------------------------------- + * Format- and pipeline-related configuration helpers + */ + +/* + * ccdc_config_vp - Configure the Video Port. + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_config_vp(struct isp_ccdc_device *ccdc) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); + struct isp_device *isp = to_isp_device(ccdc); + unsigned long l3_ick = pipe->l3_ick; + unsigned int max_div = isp->revision == ISP_REVISION_15_0 ? 64 : 8; + unsigned int div = 0; + u32 fmtcfg_vp; + + fmtcfg_vp = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG) + & ~(ISPCCDC_FMTCFG_VPIN_MASK | ISPCCDC_FMTCFG_VPIF_FRQ_MASK); + + switch (ccdc->syncif.datsz) { + case 8: + case 10: + fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_9_0; + break; + case 11: + fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_10_1; + break; + case 12: + fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_11_2; + break; + case 13: + fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_12_3; + break; + }; + + if (pipe->input) + div = DIV_ROUND_UP(l3_ick, pipe->max_rate); + else if (ccdc->vpcfg.pixelclk) + div = l3_ick / ccdc->vpcfg.pixelclk; + + div = clamp(div, 2U, max_div); + fmtcfg_vp |= (div - 2) << ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT; + + isp_reg_writel(isp, fmtcfg_vp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG); +} + +/* + * ccdc_enable_vp - Enable Video Port. + * @ccdc: Pointer to ISP CCDC device. + * @enable: 0 Disables VP, 1 Enables VP + * + * This is needed for outputting image to Preview, H3A and HIST ISP submodules. + */ +static void ccdc_enable_vp(struct isp_ccdc_device *ccdc, u8 enable) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG, + ISPCCDC_FMTCFG_VPEN, enable ? ISPCCDC_FMTCFG_VPEN : 0); +} + +/* + * ccdc_config_outlineoffset - Configure memory saving output line offset + * @ccdc: Pointer to ISP CCDC device. + * @offset: Address offset to start a new line. Must be twice the + * Output width and aligned on 32 byte boundary + * @oddeven: Specifies the odd/even line pattern to be chosen to store the + * output. + * @numlines: Set the value 0-3 for +1-4lines, 4-7 for -1-4lines. + * + * - Configures the output line offset when stored in memory + * - Sets the odd/even line pattern to store the output + * (EVENEVEN (1), ODDEVEN (2), EVENODD (3), ODDODD (4)) + * - Configures the number of even and odd line fields in case of rearranging + * the lines. + */ +static void ccdc_config_outlineoffset(struct isp_ccdc_device *ccdc, + u32 offset, u8 oddeven, u8 numlines) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_writel(isp, offset & 0xffff, + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF); + + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + ISPCCDC_SDOFST_FINV); + + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + ISPCCDC_SDOFST_FOFST_4L); + + switch (oddeven) { + case EVENEVEN: + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + (numlines & 0x7) << ISPCCDC_SDOFST_LOFST0_SHIFT); + break; + case ODDEVEN: + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + (numlines & 0x7) << ISPCCDC_SDOFST_LOFST1_SHIFT); + break; + case EVENODD: + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + (numlines & 0x7) << ISPCCDC_SDOFST_LOFST2_SHIFT); + break; + case ODDODD: + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, + (numlines & 0x7) << ISPCCDC_SDOFST_LOFST3_SHIFT); + break; + default: + break; + } +} + +/* + * ccdc_set_outaddr - Set memory address to save output image + * @ccdc: Pointer to ISP CCDC device. + * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary. + * + * Sets the memory address where the output will be saved. + */ +static void ccdc_set_outaddr(struct isp_ccdc_device *ccdc, u32 addr) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR); +} + +/* + * omap3isp_ccdc_max_rate - Calculate maximum input data rate based on the input + * @ccdc: Pointer to ISP CCDC device. + * @max_rate: Maximum calculated data rate. + * + * Returns in *max_rate less value between calculated and passed + */ +void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc, + unsigned int *max_rate) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); + unsigned int rate; + + if (pipe == NULL) + return; + + /* + * TRM says that for parallel sensors the maximum data rate + * should be 90% form L3/2 clock, otherwise just L3/2. + */ + if (ccdc->input == CCDC_INPUT_PARALLEL) + rate = pipe->l3_ick / 2 * 9 / 10; + else + rate = pipe->l3_ick / 2; + + *max_rate = min(*max_rate, rate); +} + +/* + * ccdc_config_sync_if - Set CCDC sync interface configuration + * @ccdc: Pointer to ISP CCDC device. + * @syncif: Structure containing the sync parameters like field state, CCDC in + * master/slave mode, raw/yuv data, polarity of data, field, hs, vs + * signals. + */ +static void ccdc_config_sync_if(struct isp_ccdc_device *ccdc, + struct ispccdc_syncif *syncif) +{ + struct isp_device *isp = to_isp_device(ccdc); + u32 syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_SYN_MODE); + + syn_mode |= ISPCCDC_SYN_MODE_VDHDEN; + + if (syncif->fldstat) + syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT; + else + syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT; + + syn_mode &= ~ISPCCDC_SYN_MODE_DATSIZ_MASK; + switch (syncif->datsz) { + case 8: + syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_8; + break; + case 10: + syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_10; + break; + case 11: + syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_11; + break; + case 12: + syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_12; + break; + }; + + if (syncif->fldmode) + syn_mode |= ISPCCDC_SYN_MODE_FLDMODE; + else + syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE; + + if (syncif->datapol) + syn_mode |= ISPCCDC_SYN_MODE_DATAPOL; + else + syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL; + + if (syncif->fldpol) + syn_mode |= ISPCCDC_SYN_MODE_FLDPOL; + else + syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL; + + if (syncif->hdpol) + syn_mode |= ISPCCDC_SYN_MODE_HDPOL; + else + syn_mode &= ~ISPCCDC_SYN_MODE_HDPOL; + + if (syncif->vdpol) + syn_mode |= ISPCCDC_SYN_MODE_VDPOL; + else + syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL; + + if (syncif->ccdc_mastermode) { + syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT; + isp_reg_writel(isp, + syncif->hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT + | syncif->vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT, + OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_HD_VD_WID); + + isp_reg_writel(isp, + syncif->ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT + | syncif->hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT, + OMAP3_ISP_IOMEM_CCDC, + ISPCCDC_PIX_LINES); + } else + syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT | + ISPCCDC_SYN_MODE_VDHDOUT); + + isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); + + if (!syncif->bt_r656_en) + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF, + ISPCCDC_REC656IF_R656ON); +} + +/* CCDC formats descriptions */ +static const u32 ccdc_sgrbg_pattern = + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC0_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC1_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC2_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC3_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC0_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC1_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC2_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC3_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC0_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC1_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC2_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC3_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC0_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC1_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC2_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC3_SHIFT; + +static const u32 ccdc_srggb_pattern = + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC0_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC1_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC2_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC3_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC0_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC1_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC2_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC3_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC0_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC1_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC2_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC3_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC0_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC1_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC2_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC3_SHIFT; + +static const u32 ccdc_sbggr_pattern = + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC0_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC1_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC2_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC3_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC0_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC1_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC2_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC3_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC0_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC1_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC2_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC3_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC0_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC1_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC2_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC3_SHIFT; + +static const u32 ccdc_sgbrg_pattern = + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC0_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC1_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP0PLC2_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP0PLC3_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC0_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC1_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP1PLC2_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP1PLC3_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC0_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC1_SHIFT | + ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP2PLC2_SHIFT | + ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP2PLC3_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC0_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC1_SHIFT | + ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP3PLC2_SHIFT | + ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP3PLC3_SHIFT; + +static void ccdc_configure(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + struct isp_parallel_platform_data *pdata = NULL; + struct v4l2_subdev *sensor; + struct v4l2_mbus_framefmt *format; + struct media_pad *pad; + unsigned long flags; + u32 syn_mode; + u32 ccdc_pattern; + + if (ccdc->input == CCDC_INPUT_PARALLEL) { + pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv) + ->bus.parallel; + } + + omap3isp_configure_bridge(isp, ccdc->input, pdata); + + ccdc->syncif.datsz = pdata ? pdata->width : 10; + ccdc_config_sync_if(ccdc, &ccdc->syncif); + + /* CCDC_PAD_SINK */ + format = &ccdc->formats[CCDC_PAD_SINK]; + + syn_mode = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); + + /* Use the raw, unprocessed data when writing to memory. The H3A and + * histogram modules are still fed with lens shading corrected data. + */ + syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR; + + if (ccdc->output & CCDC_OUTPUT_MEMORY) + syn_mode |= ISPCCDC_SYN_MODE_WEN; + else + syn_mode &= ~ISPCCDC_SYN_MODE_WEN; + + if (ccdc->output & CCDC_OUTPUT_RESIZER) + syn_mode |= ISPCCDC_SYN_MODE_SDR2RSZ; + else + syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ; + + /* Use PACK8 mode for 1byte per pixel formats. */ + if (omap3isp_video_format_info(format->code)->bpp <= 8) + syn_mode |= ISPCCDC_SYN_MODE_PACK8; + else + syn_mode &= ~ISPCCDC_SYN_MODE_PACK8; + + isp_reg_writel(isp, syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); + + /* Mosaic filter */ + switch (format->code) { + case V4L2_MBUS_FMT_SRGGB10_1X10: + case V4L2_MBUS_FMT_SRGGB12_1X12: + ccdc_pattern = ccdc_srggb_pattern; + break; + case V4L2_MBUS_FMT_SBGGR10_1X10: + case V4L2_MBUS_FMT_SBGGR12_1X12: + ccdc_pattern = ccdc_sbggr_pattern; + break; + case V4L2_MBUS_FMT_SGBRG10_1X10: + case V4L2_MBUS_FMT_SGBRG12_1X12: + ccdc_pattern = ccdc_sgbrg_pattern; + break; + default: + /* Use GRBG */ + ccdc_pattern = ccdc_sgrbg_pattern; + break; + } + ccdc_config_imgattr(ccdc, ccdc_pattern); + + /* Generate VD0 on the last line of the image and VD1 on the + * 2/3 height line. + */ + isp_reg_writel(isp, ((format->height - 2) << ISPCCDC_VDINT_0_SHIFT) | + ((format->height * 2 / 3) << ISPCCDC_VDINT_1_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VDINT); + + /* CCDC_PAD_SOURCE_OF */ + format = &ccdc->formats[CCDC_PAD_SOURCE_OF]; + + isp_reg_writel(isp, (0 << ISPCCDC_HORZ_INFO_SPH_SHIFT) | + ((format->width - 1) << ISPCCDC_HORZ_INFO_NPH_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO); + isp_reg_writel(isp, 0 << ISPCCDC_VERT_START_SLV0_SHIFT, + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_START); + isp_reg_writel(isp, (format->height - 1) + << ISPCCDC_VERT_LINES_NLV_SHIFT, + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_LINES); + + ccdc_config_outlineoffset(ccdc, ccdc->video_out.bpl_value, 0, 0); + + /* CCDC_PAD_SOURCE_VP */ + format = &ccdc->formats[CCDC_PAD_SOURCE_VP]; + + isp_reg_writel(isp, (0 << ISPCCDC_FMT_HORZ_FMTSPH_SHIFT) | + (format->width << ISPCCDC_FMT_HORZ_FMTLNH_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_HORZ); + isp_reg_writel(isp, (0 << ISPCCDC_FMT_VERT_FMTSLV_SHIFT) | + ((format->height + 1) << ISPCCDC_FMT_VERT_FMTLNV_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_VERT); + + isp_reg_writel(isp, (format->width << ISPCCDC_VP_OUT_HORZ_NUM_SHIFT) | + (format->height << ISPCCDC_VP_OUT_VERT_NUM_SHIFT), + OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT); + + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + if (ccdc->lsc.request == NULL) + goto unlock; + + WARN_ON(ccdc->lsc.active); + + /* Get last good LSC configuration. If it is not supported for + * the current active resolution discard it. + */ + if (ccdc->lsc.active == NULL && + __ccdc_lsc_configure(ccdc, ccdc->lsc.request) == 0) { + ccdc->lsc.active = ccdc->lsc.request; + } else { + list_add_tail(&ccdc->lsc.request->list, &ccdc->lsc.free_queue); + schedule_work(&ccdc->lsc.table_work); + } + + ccdc->lsc.request = NULL; + +unlock: + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); + + ccdc_apply_controls(ccdc); +} + +static void __ccdc_enable(struct isp_ccdc_device *ccdc, int enable) +{ + struct isp_device *isp = to_isp_device(ccdc); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR, + ISPCCDC_PCR_EN, enable ? ISPCCDC_PCR_EN : 0); +} + +static int ccdc_disable(struct isp_ccdc_device *ccdc) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ccdc->lock, flags); + if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS) + ccdc->stopping = CCDC_STOP_REQUEST; + spin_unlock_irqrestore(&ccdc->lock, flags); + + ret = wait_event_timeout(ccdc->wait, + ccdc->stopping == CCDC_STOP_FINISHED, + msecs_to_jiffies(2000)); + if (ret == 0) { + ret = -ETIMEDOUT; + dev_warn(to_device(ccdc), "CCDC stop timeout!\n"); + } + + omap3isp_sbl_disable(to_isp_device(ccdc), OMAP3_ISP_SBL_CCDC_LSC_READ); + + mutex_lock(&ccdc->ioctl_lock); + ccdc_lsc_free_request(ccdc, ccdc->lsc.request); + ccdc->lsc.request = ccdc->lsc.active; + ccdc->lsc.active = NULL; + cancel_work_sync(&ccdc->lsc.table_work); + ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue); + mutex_unlock(&ccdc->ioctl_lock); + + ccdc->stopping = CCDC_STOP_NOT_REQUESTED; + + return ret > 0 ? 0 : ret; +} + +static void ccdc_enable(struct isp_ccdc_device *ccdc) +{ + if (ccdc_lsc_is_configured(ccdc)) + __ccdc_lsc_enable(ccdc, 1); + __ccdc_enable(ccdc, 1); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +/* + * ccdc_sbl_busy - Poll idle state of CCDC and related SBL memory write bits + * @ccdc: Pointer to ISP CCDC device. + * + * Returns zero if the CCDC is idle and the image has been written to + * memory, too. + */ +static int ccdc_sbl_busy(struct isp_ccdc_device *ccdc) +{ + struct isp_device *isp = to_isp_device(ccdc); + + return omap3isp_ccdc_busy(ccdc) + | (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_0) & + ISPSBL_CCDC_WR_0_DATA_READY) + | (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_1) & + ISPSBL_CCDC_WR_0_DATA_READY) + | (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_2) & + ISPSBL_CCDC_WR_0_DATA_READY) + | (isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_3) & + ISPSBL_CCDC_WR_0_DATA_READY); +} + +/* + * ccdc_sbl_wait_idle - Wait until the CCDC and related SBL are idle + * @ccdc: Pointer to ISP CCDC device. + * @max_wait: Max retry count in us for wait for idle/busy transition. + */ +static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc, + unsigned int max_wait) +{ + unsigned int wait = 0; + + if (max_wait == 0) + max_wait = 10000; /* 10 ms */ + + for (wait = 0; wait <= max_wait; wait++) { + if (!ccdc_sbl_busy(ccdc)) + return 0; + + rmb(); + udelay(1); + } + + return -EBUSY; +} + +/* __ccdc_handle_stopping - Handle CCDC and/or LSC stopping sequence + * @ccdc: Pointer to ISP CCDC device. + * @event: Pointing which event trigger handler + * + * Return 1 when the event and stopping request combination is satisfyied, + * zero otherwise. + */ +static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event) +{ + int rval = 0; + + switch ((ccdc->stopping & 3) | event) { + case CCDC_STOP_REQUEST | CCDC_EVENT_VD1: + if (ccdc->lsc.state != LSC_STATE_STOPPED) + __ccdc_lsc_enable(ccdc, 0); + __ccdc_enable(ccdc, 0); + ccdc->stopping = CCDC_STOP_EXECUTED; + return 1; + + case CCDC_STOP_EXECUTED | CCDC_EVENT_VD0: + ccdc->stopping |= CCDC_STOP_CCDC_FINISHED; + if (ccdc->lsc.state == LSC_STATE_STOPPED) + ccdc->stopping |= CCDC_STOP_LSC_FINISHED; + rval = 1; + break; + + case CCDC_STOP_EXECUTED | CCDC_EVENT_LSC_DONE: + ccdc->stopping |= CCDC_STOP_LSC_FINISHED; + rval = 1; + break; + + case CCDC_STOP_EXECUTED | CCDC_EVENT_VD1: + return 1; + } + + if (ccdc->stopping == CCDC_STOP_FINISHED) { + wake_up(&ccdc->wait); + rval = 1; + } + + return rval; +} + +static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc) +{ + struct video_device *vdev = &ccdc->subdev.devnode; + struct v4l2_event event; + + memset(&event, 0, sizeof(event)); + event.type = V4L2_EVENT_OMAP3ISP_HS_VS; + + v4l2_event_queue(vdev, &event); +} + +/* + * ccdc_lsc_isr - Handle LSC events + * @ccdc: Pointer to ISP CCDC device. + * @events: LSC events + */ +static void ccdc_lsc_isr(struct isp_ccdc_device *ccdc, u32 events) +{ + unsigned long flags; + + if (events & IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ) { + ccdc_lsc_error_handler(ccdc); + ccdc->error = 1; + dev_dbg(to_device(ccdc), "lsc prefetch error\n"); + } + + if (!(events & IRQ0STATUS_CCDC_LSC_DONE_IRQ)) + return; + + /* LSC_DONE interrupt occur, there are two cases + * 1. stopping for reconfiguration + * 2. stopping because of STREAM OFF command + */ + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + + if (ccdc->lsc.state == LSC_STATE_STOPPING) + ccdc->lsc.state = LSC_STATE_STOPPED; + + if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_LSC_DONE)) + goto done; + + if (ccdc->lsc.state != LSC_STATE_RECONFIG) + goto done; + + /* LSC is in STOPPING state, change to the new state */ + ccdc->lsc.state = LSC_STATE_STOPPED; + + /* This is an exception. Start of frame and LSC_DONE interrupt + * have been received on the same time. Skip this event and wait + * for better times. + */ + if (events & IRQ0STATUS_HS_VS_IRQ) + goto done; + + /* The LSC engine is stopped at this point. Enable it if there's a + * pending request. + */ + if (ccdc->lsc.request == NULL) + goto done; + + ccdc_lsc_enable(ccdc); + +done: + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); +} + +static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity); + struct isp_device *isp = to_isp_device(ccdc); + struct isp_buffer *buffer; + int restart = 0; + + /* The CCDC generates VD0 interrupts even when disabled (the datasheet + * doesn't explicitly state if that's supposed to happen or not, so it + * can be considered as a hardware bug or as a feature, but we have to + * deal with it anyway). Disabling the CCDC when no buffer is available + * would thus not be enough, we need to handle the situation explicitly. + */ + if (list_empty(&ccdc->video_out.dmaqueue)) + goto done; + + /* We're in continuous mode, and memory writes were disabled due to a + * buffer underrun. Reenable them now that we have a buffer. The buffer + * address has been set in ccdc_video_queue. + */ + if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) { + restart = 1; + ccdc->underrun = 0; + goto done; + } + + if (ccdc_sbl_wait_idle(ccdc, 1000)) { + dev_info(isp->dev, "CCDC won't become idle!\n"); + goto done; + } + + buffer = omap3isp_video_buffer_next(&ccdc->video_out, ccdc->error); + if (buffer != NULL) { + ccdc_set_outaddr(ccdc, buffer->isp_addr); + restart = 1; + } + + pipe->state |= ISP_PIPELINE_IDLE_OUTPUT; + + if (ccdc->state == ISP_PIPELINE_STREAM_SINGLESHOT && + isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + +done: + ccdc->error = 0; + return restart; +} + +/* + * ccdc_vd0_isr - Handle VD0 event + * @ccdc: Pointer to ISP CCDC device. + * + * Executes LSC deferred enablement before next frame starts. + */ +static void ccdc_vd0_isr(struct isp_ccdc_device *ccdc) +{ + unsigned long flags; + int restart = 0; + + if (ccdc->output & CCDC_OUTPUT_MEMORY) + restart = ccdc_isr_buffer(ccdc); + + spin_lock_irqsave(&ccdc->lock, flags); + if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_VD0)) { + spin_unlock_irqrestore(&ccdc->lock, flags); + return; + } + + if (!ccdc->shadow_update) + ccdc_apply_controls(ccdc); + spin_unlock_irqrestore(&ccdc->lock, flags); + + if (restart) + ccdc_enable(ccdc); +} + +/* + * ccdc_vd1_isr - Handle VD1 event + * @ccdc: Pointer to ISP CCDC device. + */ +static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc) +{ + unsigned long flags; + + spin_lock_irqsave(&ccdc->lsc.req_lock, flags); + + /* + * Depending on the CCDC pipeline state, CCDC stopping should be + * handled differently. In SINGLESHOT we emulate an internal CCDC + * stopping because the CCDC hw works only in continuous mode. + * When CONTINUOUS pipeline state is used and the CCDC writes it's + * data to memory the CCDC and LSC are stopped immediately but + * without change the CCDC stopping state machine. The CCDC + * stopping state machine should be used only when user request + * for stopping is received (SINGLESHOT is an exeption). + */ + switch (ccdc->state) { + case ISP_PIPELINE_STREAM_SINGLESHOT: + ccdc->stopping = CCDC_STOP_REQUEST; + break; + + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (ccdc->output & CCDC_OUTPUT_MEMORY) { + if (ccdc->lsc.state != LSC_STATE_STOPPED) + __ccdc_lsc_enable(ccdc, 0); + __ccdc_enable(ccdc, 0); + } + break; + + case ISP_PIPELINE_STREAM_STOPPED: + break; + } + + if (__ccdc_handle_stopping(ccdc, CCDC_EVENT_VD1)) + goto done; + + if (ccdc->lsc.request == NULL) + goto done; + + /* + * LSC need to be reconfigured. Stop it here and on next LSC_DONE IRQ + * do the appropriate changes in registers + */ + if (ccdc->lsc.state == LSC_STATE_RUNNING) { + __ccdc_lsc_enable(ccdc, 0); + ccdc->lsc.state = LSC_STATE_RECONFIG; + goto done; + } + + /* LSC has been in STOPPED state, enable it */ + if (ccdc->lsc.state == LSC_STATE_STOPPED) + ccdc_lsc_enable(ccdc); + +done: + spin_unlock_irqrestore(&ccdc->lsc.req_lock, flags); +} + +/* + * omap3isp_ccdc_isr - Configure CCDC during interframe time. + * @ccdc: Pointer to ISP CCDC device. + * @events: CCDC events + */ +int omap3isp_ccdc_isr(struct isp_ccdc_device *ccdc, u32 events) +{ + if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED) + return 0; + + if (events & IRQ0STATUS_CCDC_VD1_IRQ) + ccdc_vd1_isr(ccdc); + + ccdc_lsc_isr(ccdc, events); + + if (events & IRQ0STATUS_CCDC_VD0_IRQ) + ccdc_vd0_isr(ccdc); + + if (events & IRQ0STATUS_HS_VS_IRQ) + ccdc_hs_vs_isr(ccdc); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer) +{ + struct isp_ccdc_device *ccdc = &video->isp->isp_ccdc; + + if (!(ccdc->output & CCDC_OUTPUT_MEMORY)) + return -ENODEV; + + ccdc_set_outaddr(ccdc, buffer->isp_addr); + + /* We now have a buffer queued on the output, restart the pipeline in + * on the next CCDC interrupt if running in continuous mode (or when + * starting the stream). + */ + ccdc->underrun = 1; + + return 0; +} + +static const struct isp_video_operations ccdc_video_ops = { + .queue = ccdc_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +/* + * ccdc_ioctl - CCDC module private ioctl's + * @sd: ISP CCDC V4L2 subdevice + * @cmd: ioctl command + * @arg: ioctl argument + * + * Return 0 on success or a negative error code otherwise. + */ +static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + int ret; + + switch (cmd) { + case VIDIOC_OMAP3ISP_CCDC_CFG: + mutex_lock(&ccdc->ioctl_lock); + ret = ccdc_config(ccdc, arg); + mutex_unlock(&ccdc->ioctl_lock); + break; + + default: + return -ENOIOCTLCMD; + } + + return ret; +} + +static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS) + return -EINVAL; + + return v4l2_event_subscribe(fh, sub); +} + +static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + return v4l2_event_unsubscribe(fh, sub); +} + +/* + * ccdc_set_stream - Enable/Disable streaming on the CCDC module + * @sd: ISP CCDC V4L2 subdevice + * @enable: Enable/disable stream + * + * When writing to memory, the CCDC hardware can't be enabled without a memory + * buffer to write to. As the s_stream operation is called in response to a + * STREAMON call without any buffer queued yet, just update the enabled field + * and return immediately. The CCDC will be enabled in ccdc_isr_buffer(). + * + * When not writing to memory enable the CCDC immediately. + */ +static int ccdc_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct isp_device *isp = to_isp_device(ccdc); + int ret = 0; + + if (ccdc->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + + omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_CCDC); + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, + ISPCCDC_CFG_VDLC); + + ccdc_configure(ccdc); + + /* TODO: Don't configure the video port if all of its output + * links are inactive. + */ + ccdc_config_vp(ccdc); + ccdc_enable_vp(ccdc, 1); + ccdc->error = 0; + ccdc_print_status(ccdc); + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (ccdc->output & CCDC_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE); + + if (ccdc->underrun || !(ccdc->output & CCDC_OUTPUT_MEMORY)) + ccdc_enable(ccdc); + + ccdc->underrun = 0; + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (ccdc->output & CCDC_OUTPUT_MEMORY && + ccdc->state != ISP_PIPELINE_STREAM_SINGLESHOT) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CCDC_WRITE); + + ccdc_enable(ccdc); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + ret = ccdc_disable(ccdc); + if (ccdc->output & CCDC_OUTPUT_MEMORY) + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CCDC_WRITE); + omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_CCDC); + ccdc->underrun = 0; + break; + } + + ccdc->state = enable; + return ret; +} + +static struct v4l2_mbus_framefmt * +__ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &ccdc->formats[pad]; +} + +/* + * ccdc_try_format - Try video format on a pad + * @ccdc: ISP CCDC device + * @fh : V4L2 subdev file handle + * @pad: Pad number + * @fmt: Format + */ +static void +ccdc_try_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, + unsigned int pad, struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + struct v4l2_mbus_framefmt *format; + const struct isp_format_info *info; + unsigned int width = fmt->width; + unsigned int height = fmt->height; + unsigned int i; + + switch (pad) { + case CCDC_PAD_SINK: + /* TODO: If the CCDC output formatter pad is connected directly + * to the resizer, only YUV formats can be used. + */ + for (i = 0; i < ARRAY_SIZE(ccdc_fmts); i++) { + if (fmt->code == ccdc_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(ccdc_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + /* Clamp the input size. */ + fmt->width = clamp_t(u32, width, 32, 4096); + fmt->height = clamp_t(u32, height, 32, 4096); + break; + + case CCDC_PAD_SOURCE_OF: + format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* The data formatter truncates the number of horizontal output + * pixels to a multiple of 16. To avoid clipping data, allow + * callers to request an output size bigger than the input size + * up to the nearest multiple of 16. + */ + fmt->width = clamp_t(u32, width, 32, (fmt->width + 15) & ~15); + fmt->width &= ~15; + fmt->height = clamp_t(u32, height, 32, fmt->height); + break; + + case CCDC_PAD_SOURCE_VP: + format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* The video port interface truncates the data to 10 bits. */ + info = omap3isp_video_format_info(fmt->code); + fmt->code = info->truncated; + + /* The number of lines that can be clocked out from the video + * port output must be at least one line less than the number + * of input lines. + */ + fmt->width = clamp_t(u32, width, 32, fmt->width); + fmt->height = clamp_t(u32, height, 32, fmt->height - 1); + break; + } + + /* Data is written to memory unpacked, each 10-bit or 12-bit pixel is + * stored on 2 bytes. + */ + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; +} + +/* + * ccdc_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int ccdc_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + switch (code->pad) { + case CCDC_PAD_SINK: + if (code->index >= ARRAY_SIZE(ccdc_fmts)) + return -EINVAL; + + code->code = ccdc_fmts[code->index]; + break; + + case CCDC_PAD_SOURCE_OF: + case CCDC_PAD_SOURCE_VP: + /* No format conversion inside CCDC */ + if (code->index != 0) + return -EINVAL; + + format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + + code->code = format->code; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int ccdc_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + ccdc_try_format(ccdc, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + ccdc_try_format(ccdc, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * ccdc_get_format - Retrieve the video format on a pad + * @sd : ISP CCDC V4L2 subdevice + * @fh : V4L2 subdev file handle + * @fmt: Format + * + * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond + * to the format type. + */ +static int ccdc_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccdc_get_format(ccdc, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * ccdc_set_format - Set the video format on a pad + * @sd : ISP CCDC V4L2 subdevice + * @fh : V4L2 subdev file handle + * @fmt: Format + * + * Return 0 on success or -EINVAL if the pad is invalid or doesn't correspond + * to the format type. + */ +static int ccdc_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccdc_get_format(ccdc, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + ccdc_try_format(ccdc, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CCDC_PAD_SINK) { + format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SOURCE_OF, + fmt->which); + *format = fmt->format; + ccdc_try_format(ccdc, fh, CCDC_PAD_SOURCE_OF, format, + fmt->which); + + format = __ccdc_get_format(ccdc, fh, CCDC_PAD_SOURCE_VP, + fmt->which); + *format = fmt->format; + ccdc_try_format(ccdc, fh, CCDC_PAD_SOURCE_VP, format, + fmt->which); + } + + return 0; +} + +/* + * ccdc_init_formats - Initialize formats on all pads + * @sd: ISP CCDC V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int ccdc_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CCDC_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + ccdc_set_format(sd, fh, &format); + + return 0; +} + +/* V4L2 subdev core operations */ +static const struct v4l2_subdev_core_ops ccdc_v4l2_core_ops = { + .ioctl = ccdc_ioctl, + .subscribe_event = ccdc_subscribe_event, + .unsubscribe_event = ccdc_unsubscribe_event, +}; + +/* V4L2 subdev video operations */ +static const struct v4l2_subdev_video_ops ccdc_v4l2_video_ops = { + .s_stream = ccdc_set_stream, +}; + +/* V4L2 subdev pad operations */ +static const struct v4l2_subdev_pad_ops ccdc_v4l2_pad_ops = { + .enum_mbus_code = ccdc_enum_mbus_code, + .enum_frame_size = ccdc_enum_frame_size, + .get_fmt = ccdc_get_format, + .set_fmt = ccdc_set_format, +}; + +/* V4L2 subdev operations */ +static const struct v4l2_subdev_ops ccdc_v4l2_ops = { + .core = &ccdc_v4l2_core_ops, + .video = &ccdc_v4l2_video_ops, + .pad = &ccdc_v4l2_pad_ops, +}; + +/* V4L2 subdev internal operations */ +static const struct v4l2_subdev_internal_ops ccdc_v4l2_internal_ops = { + .open = ccdc_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * ccdc_link_setup - Setup CCDC connections + * @entity: CCDC media entity + * @local: Pad at the local end of the link + * @remote: Pad at the remote end of the link + * @flags: Link flags + * + * return -EINVAL or zero on success + */ +static int ccdc_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_ccdc_device *ccdc = v4l2_get_subdevdata(sd); + struct isp_device *isp = to_isp_device(ccdc); + + switch (local->index | media_entity_type(remote->entity)) { + case CCDC_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* Read from the sensor (parallel interface), CCP2, CSI2a or + * CSI2c. + */ + if (!(flags & MEDIA_LNK_FL_ENABLED)) { + ccdc->input = CCDC_INPUT_NONE; + break; + } + + if (ccdc->input != CCDC_INPUT_NONE) + return -EBUSY; + + if (remote->entity == &isp->isp_ccp2.subdev.entity) + ccdc->input = CCDC_INPUT_CCP2B; + else if (remote->entity == &isp->isp_csi2a.subdev.entity) + ccdc->input = CCDC_INPUT_CSI2A; + else if (remote->entity == &isp->isp_csi2c.subdev.entity) + ccdc->input = CCDC_INPUT_CSI2C; + else + ccdc->input = CCDC_INPUT_PARALLEL; + + break; + + /* + * The ISP core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + case CCDC_PAD_SOURCE_VP | MEDIA_ENT_T_V4L2_SUBDEV: + /* Write to preview engine, histogram and H3A. When none of + * those links are active, the video port can be disabled. + */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccdc->output & ~CCDC_OUTPUT_PREVIEW) + return -EBUSY; + ccdc->output |= CCDC_OUTPUT_PREVIEW; + } else { + ccdc->output &= ~CCDC_OUTPUT_PREVIEW; + } + break; + + case CCDC_PAD_SOURCE_OF | MEDIA_ENT_T_DEVNODE: + /* Write to memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccdc->output & ~CCDC_OUTPUT_MEMORY) + return -EBUSY; + ccdc->output |= CCDC_OUTPUT_MEMORY; + } else { + ccdc->output &= ~CCDC_OUTPUT_MEMORY; + } + break; + + case CCDC_PAD_SOURCE_OF | MEDIA_ENT_T_V4L2_SUBDEV: + /* Write to resizer */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccdc->output & ~CCDC_OUTPUT_RESIZER) + return -EBUSY; + ccdc->output |= CCDC_OUTPUT_RESIZER; + } else { + ccdc->output &= ~CCDC_OUTPUT_RESIZER; + } + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations ccdc_media_ops = { + .link_setup = ccdc_link_setup, +}; + +/* + * ccdc_init_entities - Initialize V4L2 subdev and media entity + * @ccdc: ISP CCDC module + * + * Return 0 on success and a negative error code on failure. + */ +static int ccdc_init_entities(struct isp_ccdc_device *ccdc) +{ + struct v4l2_subdev *sd = &ccdc->subdev; + struct media_pad *pads = ccdc->pads; + struct media_entity *me = &sd->entity; + int ret; + + ccdc->input = CCDC_INPUT_NONE; + + v4l2_subdev_init(sd, &ccdc_v4l2_ops); + sd->internal_ops = &ccdc_v4l2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP CCDC", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, ccdc); + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; + sd->nevents = OMAP3ISP_CCDC_NEVENTS; + + pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; + pads[CCDC_PAD_SOURCE_OF].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &ccdc_media_ops; + ret = media_entity_init(me, CCDC_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + ccdc_init_formats(sd, NULL); + + ccdc->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + ccdc->video_out.ops = &ccdc_video_ops; + ccdc->video_out.isp = to_isp_device(ccdc); + ccdc->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + ccdc->video_out.bpl_alignment = 32; + + ret = omap3isp_video_init(&ccdc->video_out, "CCDC"); + if (ret < 0) + return ret; + + /* Connect the CCDC subdev to the video node. */ + ret = media_entity_create_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF, + &ccdc->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc) +{ + media_entity_cleanup(&ccdc->subdev.entity); + + v4l2_device_unregister_subdev(&ccdc->subdev); + omap3isp_video_unregister(&ccdc->video_out); +} + +int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video node. */ + ret = v4l2_device_register_subdev(vdev, &ccdc->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&ccdc->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_ccdc_unregister_entities(ccdc); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP CCDC initialisation and cleanup + */ + +/* + * omap3isp_ccdc_init - CCDC module initialization. + * @dev: Device pointer specific to the OMAP3 ISP. + * + * TODO: Get the initialisation values from platform data. + * + * Return 0 on success or a negative error code otherwise. + */ +int omap3isp_ccdc_init(struct isp_device *isp) +{ + struct isp_ccdc_device *ccdc = &isp->isp_ccdc; + + spin_lock_init(&ccdc->lock); + init_waitqueue_head(&ccdc->wait); + mutex_init(&ccdc->ioctl_lock); + + ccdc->stopping = CCDC_STOP_NOT_REQUESTED; + + INIT_WORK(&ccdc->lsc.table_work, ccdc_lsc_free_table_work); + ccdc->lsc.state = LSC_STATE_STOPPED; + INIT_LIST_HEAD(&ccdc->lsc.free_queue); + spin_lock_init(&ccdc->lsc.req_lock); + + ccdc->syncif.ccdc_mastermode = 0; + ccdc->syncif.datapol = 0; + ccdc->syncif.datsz = 0; + ccdc->syncif.fldmode = 0; + ccdc->syncif.fldout = 0; + ccdc->syncif.fldpol = 0; + ccdc->syncif.fldstat = 0; + ccdc->syncif.hdpol = 0; + ccdc->syncif.vdpol = 0; + + ccdc->clamp.oblen = 0; + ccdc->clamp.dcsubval = 0; + + ccdc->vpcfg.pixelclk = 0; + + ccdc->update = OMAP3ISP_CCDC_BLCLAMP; + ccdc_apply_controls(ccdc); + + return ccdc_init_entities(ccdc); +} + +/* + * omap3isp_ccdc_cleanup - CCDC module cleanup. + * @dev: Device pointer specific to the OMAP3 ISP. + */ +void omap3isp_ccdc_cleanup(struct isp_device *isp) +{ + struct isp_ccdc_device *ccdc = &isp->isp_ccdc; + + /* Free LSC requests. As the CCDC is stopped there's no active request, + * so only the pending request and the free queue need to be handled. + */ + ccdc_lsc_free_request(ccdc, ccdc->lsc.request); + cancel_work_sync(&ccdc->lsc.table_work); + ccdc_lsc_free_queue(ccdc, &ccdc->lsc.free_queue); + + if (ccdc->fpc.fpcaddr != 0) + iommu_vfree(isp->iommu, ccdc->fpc.fpcaddr); +} diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/video/omap3isp/ispccdc.h new file mode 100644 index 000000000000..d403af5d31d2 --- /dev/null +++ b/drivers/media/video/omap3isp/ispccdc.h @@ -0,0 +1,219 @@ +/* + * ispccdc.h + * + * TI OMAP3 ISP - CCDC module + * + * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CCDC_H +#define OMAP3_ISP_CCDC_H + +#include <linux/omap3isp.h> +#include <linux/workqueue.h> + +#include "ispvideo.h" + +enum ccdc_input_entity { + CCDC_INPUT_NONE, + CCDC_INPUT_PARALLEL, + CCDC_INPUT_CSI2A, + CCDC_INPUT_CCP2B, + CCDC_INPUT_CSI2C +}; + +#define CCDC_OUTPUT_MEMORY (1 << 0) +#define CCDC_OUTPUT_PREVIEW (1 << 1) +#define CCDC_OUTPUT_RESIZER (1 << 2) + +#define OMAP3ISP_CCDC_NEVENTS 16 + +/* + * struct ispccdc_syncif - Structure for Sync Interface between sensor and CCDC + * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave. + * @fldstat: Field state. 0 - Odd Field, 1 - Even Field. + * @datsz: Data size. + * @fldmode: 0 - Progressive, 1 - Interlaced. + * @datapol: 0 - Positive, 1 - Negative. + * @fldpol: 0 - Positive, 1 - Negative. + * @hdpol: 0 - Positive, 1 - Negative. + * @vdpol: 0 - Positive, 1 - Negative. + * @fldout: 0 - Input, 1 - Output. + * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output. + * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output. + * @ppln: Number of pixels per line, used for HS/VS Output. + * @hlprf: Number of half lines per frame, used for HS/VS Output. + * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode. + */ +struct ispccdc_syncif { + u8 ccdc_mastermode; + u8 fldstat; + u8 datsz; + u8 fldmode; + u8 datapol; + u8 fldpol; + u8 hdpol; + u8 vdpol; + u8 fldout; + u8 hs_width; + u8 vs_width; + u8 ppln; + u8 hlprf; + u8 bt_r656_en; +}; + +/* + * struct ispccdc_vp - Structure for Video Port parameters + * @pixelclk: Input pixel clock in Hz + */ +struct ispccdc_vp { + unsigned int pixelclk; +}; + +enum ispccdc_lsc_state { + LSC_STATE_STOPPED = 0, + LSC_STATE_STOPPING = 1, + LSC_STATE_RUNNING = 2, + LSC_STATE_RECONFIG = 3, +}; + +struct ispccdc_lsc_config_req { + struct list_head list; + struct omap3isp_ccdc_lsc_config config; + unsigned char enable; + u32 table; + struct iovm_struct *iovm; +}; + +/* + * ispccdc_lsc - CCDC LSC parameters + * @update_config: Set when user changes config + * @request_enable: Whether LSC is requested to be enabled + * @config: LSC config set by user + * @update_table: Set when user provides a new LSC table to table_new + * @table_new: LSC table set by user, ISP address + * @table_inuse: LSC table currently in use, ISP address + */ +struct ispccdc_lsc { + enum ispccdc_lsc_state state; + struct work_struct table_work; + + /* LSC queue of configurations */ + spinlock_t req_lock; + struct ispccdc_lsc_config_req *request; /* requested configuration */ + struct ispccdc_lsc_config_req *active; /* active configuration */ + struct list_head free_queue; /* configurations for freeing */ +}; + +#define CCDC_STOP_NOT_REQUESTED 0x00 +#define CCDC_STOP_REQUEST 0x01 +#define CCDC_STOP_EXECUTED (0x02 | CCDC_STOP_REQUEST) +#define CCDC_STOP_CCDC_FINISHED 0x04 +#define CCDC_STOP_LSC_FINISHED 0x08 +#define CCDC_STOP_FINISHED \ + (CCDC_STOP_EXECUTED | CCDC_STOP_CCDC_FINISHED | CCDC_STOP_LSC_FINISHED) + +#define CCDC_EVENT_VD1 0x10 +#define CCDC_EVENT_VD0 0x20 +#define CCDC_EVENT_LSC_DONE 0x40 + +/* Sink and source CCDC pads */ +#define CCDC_PAD_SINK 0 +#define CCDC_PAD_SOURCE_OF 1 +#define CCDC_PAD_SOURCE_VP 2 +#define CCDC_PADS_NUM 3 + +/* + * struct isp_ccdc_device - Structure for the CCDC module to store its own + * information + * @subdev: V4L2 subdevice + * @pads: Sink and source media entity pads + * @formats: Active video formats + * @input: Active input + * @output: Active outputs + * @video_out: Output video node + * @error: A hardware error occured during capture + * @alaw: A-law compression enabled (1) or disabled (0) + * @lpf: Low pass filter enabled (1) or disabled (0) + * @obclamp: Optical-black clamp enabled (1) or disabled (0) + * @fpc_en: Faulty pixels correction enabled (1) or disabled (0) + * @blcomp: Black level compensation configuration + * @clamp: Optical-black or digital clamp configuration + * @fpc: Faulty pixels correction configuration + * @lsc: Lens shading compensation configuration + * @update: Bitmask of controls to update during the next interrupt + * @shadow_update: Controls update in progress by userspace + * @syncif: Interface synchronization configuration + * @vpcfg: Video port configuration + * @underrun: A buffer underrun occured and a new buffer has been queued + * @state: Streaming state + * @lock: Serializes shadow_update with interrupt handler + * @wait: Wait queue used to stop the module + * @stopping: Stopping state + * @ioctl_lock: Serializes ioctl calls and LSC requests freeing + */ +struct isp_ccdc_device { + struct v4l2_subdev subdev; + struct media_pad pads[CCDC_PADS_NUM]; + struct v4l2_mbus_framefmt formats[CCDC_PADS_NUM]; + + enum ccdc_input_entity input; + unsigned int output; + struct isp_video video_out; + unsigned int error; + + unsigned int alaw:1, + lpf:1, + obclamp:1, + fpc_en:1; + struct omap3isp_ccdc_blcomp blcomp; + struct omap3isp_ccdc_bclamp clamp; + struct omap3isp_ccdc_fpc fpc; + struct ispccdc_lsc lsc; + unsigned int update; + unsigned int shadow_update; + + struct ispccdc_syncif syncif; + struct ispccdc_vp vpcfg; + + unsigned int underrun:1; + enum isp_pipeline_stream_state state; + spinlock_t lock; + wait_queue_head_t wait; + unsigned int stopping; + struct mutex ioctl_lock; +}; + +struct isp_device; + +int omap3isp_ccdc_init(struct isp_device *isp); +void omap3isp_ccdc_cleanup(struct isp_device *isp); +int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc, + struct v4l2_device *vdev); +void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc); + +int omap3isp_ccdc_busy(struct isp_ccdc_device *isp_ccdc); +int omap3isp_ccdc_isr(struct isp_ccdc_device *isp_ccdc, u32 events); +void omap3isp_ccdc_restore_context(struct isp_device *isp); +void omap3isp_ccdc_max_rate(struct isp_ccdc_device *ccdc, + unsigned int *max_rate); + +#endif /* OMAP3_ISP_CCDC_H */ diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c new file mode 100644 index 000000000000..0efef2e78d93 --- /dev/null +++ b/drivers/media/video/omap3isp/ispccp2.c @@ -0,0 +1,1173 @@ +/* + * ispccp2.c + * + * TI OMAP3 ISP - CCP2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispccp2.h" + +/* Number of LCX channels */ +#define CCP2_LCx_CHANS_NUM 3 +/* Max/Min size for CCP2 video port */ +#define ISPCCP2_DAT_START_MIN 0 +#define ISPCCP2_DAT_START_MAX 4095 +#define ISPCCP2_DAT_SIZE_MIN 0 +#define ISPCCP2_DAT_SIZE_MAX 4095 +#define ISPCCP2_VPCLK_FRACDIV 65536 +#define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP 0x12 +#define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP 0x16 +/* Max/Min size for CCP2 memory channel */ +#define ISPCCP2_LCM_HSIZE_COUNT_MIN 16 +#define ISPCCP2_LCM_HSIZE_COUNT_MAX 8191 +#define ISPCCP2_LCM_HSIZE_SKIP_MIN 0 +#define ISPCCP2_LCM_HSIZE_SKIP_MAX 8191 +#define ISPCCP2_LCM_VSIZE_MIN 1 +#define ISPCCP2_LCM_VSIZE_MAX 8191 +#define ISPCCP2_LCM_HWORDS_MIN 1 +#define ISPCCP2_LCM_HWORDS_MAX 4095 +#define ISPCCP2_LCM_CTRL_BURST_SIZE_32X 5 +#define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL 0 +#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 2 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 2 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 3 +#define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 3 +#define ISPCCP2_LCM_CTRL_DST_PORT_VP 0 +#define ISPCCP2_LCM_CTRL_DST_PORT_MEM 1 + +/* Set only the required bits */ +#define BIT_SET(var, shift, mask, val) \ + do { \ + var = ((var) & ~((mask) << (shift))) \ + | ((val) << (shift)); \ + } while (0) + +/* + * ccp2_print_status - Print current CCP2 module register values. + */ +#define CCP2_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name)) + +static void ccp2_print_status(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + + dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n"); + + CCP2_PRINT_REGISTER(isp, SYSCONFIG); + CCP2_PRINT_REGISTER(isp, SYSSTATUS); + CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, CTRL); + CCP2_PRINT_REGISTER(isp, LCx_CTRL(0)); + CCP2_PRINT_REGISTER(isp, LCx_CODE(0)); + CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0)); + CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0)); + CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0)); + CCP2_PRINT_REGISTER(isp, LCM_CTRL); + CCP2_PRINT_REGISTER(isp, LCM_VSIZE); + CCP2_PRINT_REGISTER(isp, LCM_HSIZE); + CCP2_PRINT_REGISTER(isp, LCM_PREFETCH); + CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR); + CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST); + CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR); + CCP2_PRINT_REGISTER(isp, LCM_DST_OFST); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * ccp2_reset - Reset the CCP2 + * @ccp2: pointer to ISP CCP2 device + */ +static void ccp2_reset(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + int i = 0; + + /* Reset the CSI1/CCP2B and wait for reset to complete */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG, + ISPCCP2_SYSCONFIG_SOFT_RESET); + while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) & + ISPCCP2_SYSSTATUS_RESET_DONE)) { + udelay(10); + if (i++ > 10) { /* try read 10 times */ + dev_warn(isp->dev, + "omap3_isp: timeout waiting for ccp2 reset\n"); + break; + } + } +} + +/* + * ccp2_pwr_cfg - Configure the power mode settings + * @ccp2: pointer to ISP CCP2 device + */ +static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + + isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART | + ((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ? + ISPCCP2_SYSCONFIG_AUTO_IDLE : 0), + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG); +} + +/* + * ccp2_if_enable - Enable CCP2 interface. + * @ccp2: pointer to ISP CCP2 device + * @enable: enable/disable flag + */ +static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable) +{ + struct isp_device *isp = to_isp_device(ccp2); + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + int i; + + /* Enable/Disable all the LCx channels */ + for (i = 0; i < CCP2_LCx_CHANS_NUM; i++) + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i), + ISPCCP2_LCx_CTRL_CHAN_EN, + enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0); + + /* Enable/Disable ccp2 interface in ccp2 mode */ + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN, + enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0); + + /* For frame count propagation */ + if (pipe->do_propagation) { + /* We may want the Frame Start IRQ from LC0 */ + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQENABLE, + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQENABLE, + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ); + } +} + +/* + * ccp2_mem_enable - Enable CCP2 memory interface. + * @ccp2: pointer to ISP CCP2 device + * @enable: enable/disable flag + */ +static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable) +{ + struct isp_device *isp = to_isp_device(ccp2); + + if (enable) + ccp2_if_enable(ccp2, 0); + + /* Enable/Disable ccp2 interface in ccp2 mode */ + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL, + ISPCCP2_LCM_CTRL_CHAN_EN, + enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0); +} + +/* + * ccp2_phyif_config - Initialize CCP2 phy interface config + * @ccp2: Pointer to ISP CCP2 device + * @config: CCP2 platform data + * + * Configure the CCP2 physical interface module from platform data. + * + * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success. + */ +static int ccp2_phyif_config(struct isp_ccp2_device *ccp2, + const struct isp_ccp2_platform_data *pdata) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val; + + /* CCP2B mode */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) | + ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE; + /* Data/strobe physical layer */ + BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK, + pdata->phy_layer); + BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK, + pdata->strobe_clk_pol); + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + if (!(val & ISPCCP2_CTRL_MODE)) { + if (pdata->ccp2_mode) + dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n"); + if (pdata->phy_layer == ISPCCP2_CTRL_PHY_SEL_STROBE) + /* Strobe mode requires CCP2 */ + return -EIO; + } + + return 0; +} + +/* + * ccp2_vp_config - Initialize CCP2 video port interface. + * @ccp2: Pointer to ISP CCP2 device + * @vpclk_div: Video port divisor + * + * Configure the CCP2 video port with the given clock divisor. The valid divisor + * values depend on the ISP revision: + * + * - revision 1.0 and 2.0 1 to 4 + * - revision 15.0 1 to 65536 + * + * The exact divisor value used might differ from the requested value, as ISP + * revision 15.0 represent the divisor by 65536 divided by an integer. + */ +static void ccp2_vp_config(struct isp_ccp2_device *ccp2, + unsigned int vpclk_div) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val; + + /* ISPCCP2_CTRL Video port */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + val |= ISPCCP2_CTRL_VP_ONLY_EN; /* Disable the memory write port */ + + if (isp->revision == ISP_REVISION_15_0) { + vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536); + vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U); + BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT, + ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div); + } else { + vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4); + BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT, + ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1); + } + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); +} + +/* + * ccp2_lcx_config - Initialize CCP2 logical channel interface. + * @ccp2: Pointer to ISP CCP2 device + * @config: Pointer to ISP LCx config structure. + * + * This will analyze the parameters passed by the interface config + * and configure CSI1/CCP2 logical channel + * + */ +static void ccp2_lcx_config(struct isp_ccp2_device *ccp2, + struct isp_interface_lcx_config *config) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val, format; + + switch (config->format) { + case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: + format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP; + break; + case V4L2_MBUS_FMT_SGRBG10_1X10: + default: + format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP; /* RAW10+VP */ + break; + } + /* ISPCCP2_LCx_CTRL logical channel #0 */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0)) + | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */ + + if (isp->revision == ISP_REVISION_15_0) { + /* CRC */ + BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0, + ISPCCP2_LCx_CTRL_CRC_MASK, + config->crc); + /* Format = RAW10+VP or RAW8+DPCM10+VP*/ + BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0, + ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format); + } else { + BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT, + ISPCCP2_LCx_CTRL_CRC_MASK, + config->crc); + + BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT, + ISPCCP2_LCx_CTRL_FORMAT_MASK, format); + } + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0)); + + /* ISPCCP2_DAT_START for logical channel #0 */ + isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0)); + + /* ISPCCP2_DAT_SIZE for logical channel #0 */ + isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0)); + + /* Enable error IRQs for logical channel #0 */ + val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ; + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS); + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val); +} + +/* + * ccp2_if_configure - Configure ccp2 with data from sensor + * @ccp2: Pointer to ISP CCP2 device + * + * Return 0 on success or a negative error code + */ +static int ccp2_if_configure(struct isp_ccp2_device *ccp2) +{ + const struct isp_v4l2_subdevs_group *pdata; + struct v4l2_mbus_framefmt *format; + struct media_pad *pad; + struct v4l2_subdev *sensor; + u32 lines = 0; + int ret; + + ccp2_pwr_cfg(ccp2); + + pad = media_entity_remote_source(&ccp2->pads[CCP2_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = sensor->host_priv; + + ret = ccp2_phyif_config(ccp2, &pdata->bus.ccp2); + if (ret < 0) + return ret; + + ccp2_vp_config(ccp2, pdata->bus.ccp2.vpclk_div + 1); + + v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines); + + format = &ccp2->formats[CCP2_PAD_SINK]; + + ccp2->if_cfg.data_start = lines; + ccp2->if_cfg.crc = pdata->bus.ccp2.crc; + ccp2->if_cfg.format = format->code; + ccp2->if_cfg.data_size = format->height; + + ccp2_lcx_config(ccp2, &ccp2->if_cfg); + + return 0; +} + +static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + struct isp_device *isp = to_isp_device(ccp2); + const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE]; + unsigned long l3_ick = pipe->l3_ick; + struct v4l2_fract *timeperframe; + unsigned int vpclk_div = 2; + unsigned int value; + u64 bound; + u64 area; + + /* Compute the minimum clock divisor, based on the pipeline maximum + * data rate. This is an absolute lower bound if we don't want SBL + * overflows, so round the value up. + */ + vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate), + vpclk_div); + + /* Compute the maximum clock divisor, based on the requested frame rate. + * This is a soft lower bound to achieve a frame rate equal or higher + * than the requested value, so round the value down. + */ + timeperframe = &pipe->max_timeperframe; + + if (timeperframe->numerator) { + area = ofmt->width * ofmt->height; + bound = div_u64(area * timeperframe->denominator, + timeperframe->numerator); + value = min_t(u64, bound, l3_ick); + vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div); + } + + dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__, + vpclk_div); + + return vpclk_div; +} + +/* + * ccp2_mem_configure - Initialize CCP2 memory input/output interface + * @ccp2: Pointer to ISP CCP2 device + * @config: Pointer to ISP mem interface config structure + * + * This will analyze the parameters passed by the interface config + * structure, and configure the respective registers for proper + * CSI1/CCP2 memory input. + */ +static void ccp2_mem_configure(struct isp_ccp2_device *ccp2, + struct isp_interface_mem_config *config) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code; + u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code; + unsigned int dpcm_decompress = 0; + u32 val, hwords; + + if (sink_pixcode != source_pixcode && + sink_pixcode == V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8) + dpcm_decompress = 1; + + ccp2_pwr_cfg(ccp2); + + /* Hsize, Skip */ + isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN | + (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT), + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE); + + /* Vsize, no. of lines */ + isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE); + + if (ccp2->video_in.bpl_padding == 0) + config->src_ofst = 0; + else + config->src_ofst = ccp2->video_in.bpl_value; + + isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_SRC_OFST); + + /* Source and Destination formats */ + val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 << + ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT; + + if (dpcm_decompress) { + /* source format is RAW8 */ + val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 << + ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT; + + /* RAW8 + DPCM10 - simple predictor */ + val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED; + + /* enable source DPCM decompression */ + val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 << + ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT; + } else { + /* source format is RAW10 */ + val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 << + ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT; + } + + /* Burst size to 32x64 */ + val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X << + ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT; + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL); + + /* Prefetch setup */ + if (dpcm_decompress) + hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN + + config->hsize_count) >> 3; + else + hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN + + config->hsize_count) >> 2; + + isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH); + + /* Video port */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE); + ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2)); + + /* Clear LCM interrupts */ + isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ | + ISPCCP2_LCM_IRQSTATUS_EOF_IRQ, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS); + + /* Enable LCM interupts */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE, + ISPCCP2_LCM_IRQSTATUS_EOF_IRQ | + ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ); +} + +/* + * ccp2_set_inaddr - Sets memory address of input frame. + * @ccp2: Pointer to ISP CCP2 device + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address from which the input frame is to be read. + */ +static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr) +{ + struct isp_device *isp = to_isp_device(ccp2); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + struct isp_buffer *buffer; + + buffer = omap3isp_video_buffer_next(&ccp2->video_in, ccp2->error); + if (buffer != NULL) + ccp2_set_inaddr(ccp2, buffer->isp_addr); + + pipe->state |= ISP_PIPELINE_IDLE_INPUT; + + if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) { + if (isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + } + + ccp2->error = 0; +} + +/* + * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts + * @ccp2: Pointer to ISP CCP2 device + * + * This will handle the CCP2 interrupts + * + * Returns -EIO in case of error, or 0 on success. + */ +int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + int ret = 0; + static const u32 ISPCCP2_LC01_ERROR = + ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ; + u32 lcx_irqstatus, lcm_irqstatus; + + /* First clear the interrupts */ + lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQSTATUS); + isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQSTATUS); + + lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_IRQSTATUS); + isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_IRQSTATUS); + /* Errors */ + if (lcx_irqstatus & ISPCCP2_LC01_ERROR) { + ccp2->error = 1; + dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus); + return -EIO; + } + + if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) { + ccp2->error = 1; + dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus); + ret = -EIO; + } + + if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping)) + return 0; + + /* Frame number propagation */ + if (lcx_irqstatus & ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ) { + struct isp_pipeline *pipe = + to_isp_pipeline(&ccp2->subdev.entity); + if (pipe->do_propagation) + atomic_inc(&pipe->frame_number); + } + + /* Handle queued buffers on frame end interrupts */ + if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ) + ccp2_isr_buffer(ccp2); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static const unsigned int ccp2_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, +}; + +/* + * __ccp2_get_format - helper function for getting ccp2 format + * @ccp2 : Pointer to ISP CCP2 device + * @fh : V4L2 subdev file handle + * @pad : pad number + * @which : wanted subdev format + * return format structure or NULL on error + */ +static struct v4l2_mbus_framefmt * +__ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &ccp2->formats[pad]; +} + +/* + * ccp2_try_format - Handle try format by pad subdev method + * @ccp2 : Pointer to ISP CCP2 device + * @fh : V4L2 subdev file handle + * @pad : pad num + * @fmt : pointer to v4l2 mbus format structure + * @which : wanted subdev format + */ +static void ccp2_try_format(struct isp_ccp2_device *ccp2, + struct v4l2_subdev_fh *fh, unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + struct v4l2_mbus_framefmt *format; + + switch (pad) { + case CCP2_PAD_SINK: + if (fmt->code != V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + if (ccp2->input == CCP2_INPUT_SENSOR) { + fmt->width = clamp_t(u32, fmt->width, + ISPCCP2_DAT_START_MIN, + ISPCCP2_DAT_START_MAX); + fmt->height = clamp_t(u32, fmt->height, + ISPCCP2_DAT_SIZE_MIN, + ISPCCP2_DAT_SIZE_MAX); + } else if (ccp2->input == CCP2_INPUT_MEMORY) { + fmt->width = clamp_t(u32, fmt->width, + ISPCCP2_LCM_HSIZE_COUNT_MIN, + ISPCCP2_LCM_HSIZE_COUNT_MAX); + fmt->height = clamp_t(u32, fmt->height, + ISPCCP2_LCM_VSIZE_MIN, + ISPCCP2_LCM_VSIZE_MAX); + } + break; + + case CCP2_PAD_SOURCE: + /* Source format - copy sink format and change pixel code + * to SGRBG10_1X10 as we don't support CCP2 write to memory. + * When CCP2 write to memory feature will be added this + * should be changed properly. + */ + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + break; + } + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +/* + * ccp2_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int ccp2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + if (code->pad == CCP2_PAD_SINK) { + if (code->index >= ARRAY_SIZE(ccp2_fmts)) + return -EINVAL; + + code->code = ccp2_fmts[code->index]; + } else { + if (code->index != 0) + return -EINVAL; + + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + code->code = format->code; + } + + return 0; +} + +static int ccp2_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * ccp2_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * ccp2_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * returns zero + */ +static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + ccp2_try_format(ccp2, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CCP2_PAD_SINK) { + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SOURCE, + fmt->which); + *format = fmt->format; + ccp2_try_format(ccp2, fh, CCP2_PAD_SOURCE, format, fmt->which); + } + + return 0; +} + +/* + * ccp2_init_formats - Initialize formats on all pads + * @sd: ISP CCP2 V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CCP2_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + ccp2_set_format(sd, fh, &format); + + return 0; +} + +/* + * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev + * @sd : pointer to v4l2 subdev structure + * @enable: 1 == Enable, 0 == Disable + * return zero + */ +static int ccp2_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct isp_device *isp = to_isp_device(ccp2); + struct device *dev = to_device(ccp2); + int ret; + + if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + atomic_set(&ccp2->stopping, 0); + ccp2->error = 0; + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (ccp2->phy) { + ret = omap3isp_csiphy_acquire(ccp2->phy); + if (ret < 0) + return ret; + } + + ccp2_if_configure(ccp2); + ccp2_print_status(ccp2); + + /* Enable CSI1/CCP2 interface */ + ccp2_if_enable(ccp2, 1); + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) { + struct v4l2_mbus_framefmt *format; + + format = &ccp2->formats[CCP2_PAD_SINK]; + + ccp2->mem_cfg.hsize_count = format->width; + ccp2->mem_cfg.vsize_count = format->height; + ccp2->mem_cfg.src_ofst = 0; + + ccp2_mem_configure(ccp2, &ccp2->mem_cfg); + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ); + ccp2_print_status(ccp2); + } + ccp2_mem_enable(ccp2, 1); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait, + &ccp2->stopping)) + dev_dbg(dev, "%s: module stop timeout.\n", sd->name); + if (ccp2->input == CCP2_INPUT_MEMORY) { + ccp2_mem_enable(ccp2, 0); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ); + } else if (ccp2->input == CCP2_INPUT_SENSOR) { + /* Disable CSI1/CCP2 interface */ + ccp2_if_enable(ccp2, 0); + if (ccp2->phy) + omap3isp_csiphy_release(ccp2->phy); + } + break; + } + + ccp2->state = enable; + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = { + .s_stream = ccp2_s_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = { + .enum_mbus_code = ccp2_enum_mbus_code, + .enum_frame_size = ccp2_enum_frame_size, + .get_fmt = ccp2_get_format, + .set_fmt = ccp2_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops ccp2_sd_ops = { + .video = &ccp2_sd_video_ops, + .pad = &ccp2_sd_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = { + .open = ccp2_init_formats, +}; + +/* -------------------------------------------------------------------------- + * ISP ccp2 video device node + */ + +/* + * ccp2_video_queue - Queue video buffer. + * @video : Pointer to isp video structure + * @buffer: Pointer to isp_buffer structure + * return -EIO or zero on success + */ +static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer) +{ + struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2; + + ccp2_set_inaddr(ccp2, buffer->isp_addr); + return 0; +} + +static const struct isp_video_operations ccp2_video_ops = { + .queue = ccp2_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * ccp2_link_setup - Setup ccp2 connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL on error or zero on success + */ +static int ccp2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + + switch (local->index | media_entity_type(remote->entity)) { + case CCP2_PAD_SINK | MEDIA_ENT_T_DEVNODE: + /* read from memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccp2->input == CCP2_INPUT_SENSOR) + return -EBUSY; + ccp2->input = CCP2_INPUT_MEMORY; + } else { + if (ccp2->input == CCP2_INPUT_MEMORY) + ccp2->input = CCP2_INPUT_NONE; + } + break; + + case CCP2_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* read from sensor/phy */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccp2->input == CCP2_INPUT_MEMORY) + return -EBUSY; + ccp2->input = CCP2_INPUT_SENSOR; + } else { + if (ccp2->input == CCP2_INPUT_SENSOR) + ccp2->input = CCP2_INPUT_NONE; + } break; + + case CCP2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + /* write to video port/ccdc */ + if (flags & MEDIA_LNK_FL_ENABLED) + ccp2->output = CCP2_OUTPUT_CCDC; + else + ccp2->output = CCP2_OUTPUT_NONE; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations ccp2_media_ops = { + .link_setup = ccp2_link_setup, +}; + +/* + * ccp2_init_entities - Initialize ccp2 subdev and media entity. + * @ccp2: Pointer to ISP CCP2 device + * return negative error code or zero on success + */ +static int ccp2_init_entities(struct isp_ccp2_device *ccp2) +{ + struct v4l2_subdev *sd = &ccp2->subdev; + struct media_pad *pads = ccp2->pads; + struct media_entity *me = &sd->entity; + int ret; + + ccp2->input = CCP2_INPUT_NONE; + ccp2->output = CCP2_OUTPUT_NONE; + + v4l2_subdev_init(sd, &ccp2_sd_ops); + sd->internal_ops = &ccp2_sd_internal_ops; + strlcpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, ccp2); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &ccp2_media_ops; + ret = media_entity_init(me, CCP2_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + ccp2_init_formats(sd, NULL); + + /* + * The CCP2 has weird line alignment requirements, possibly caused by + * DPCM8 decompression. Line length for data read from memory must be a + * multiple of 128 bits (16 bytes) in continuous mode (when no padding + * is present at end of lines). Additionally, if padding is used, the + * padded line length must be a multiple of 32 bytes. To simplify the + * implementation we use a fixed 32 bytes alignment regardless of the + * input format and width. If strict 128 bits alignment support is + * required ispvideo will need to be made aware of this special dual + * alignement requirements. + */ + ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccp2->video_in.bpl_alignment = 32; + ccp2->video_in.bpl_max = 0xffffffe0; + ccp2->video_in.isp = to_isp_device(ccp2); + ccp2->video_in.ops = &ccp2_video_ops; + ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + + ret = omap3isp_video_init(&ccp2->video_in, "CCP2"); + if (ret < 0) + return ret; + + /* Connect the video node to the ccp2 subdev. */ + ret = media_entity_create_link(&ccp2->video_in.video.entity, 0, + &ccp2->subdev.entity, CCP2_PAD_SINK, 0); + if (ret < 0) + return ret; + + return 0; +} + +/* + * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev + * @ccp2: Pointer to ISP CCP2 device + */ +void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2) +{ + media_entity_cleanup(&ccp2->subdev.entity); + + v4l2_device_unregister_subdev(&ccp2->subdev); + omap3isp_video_unregister(&ccp2->video_in); +} + +/* + * omap3isp_ccp2_register_entities - Register the subdev media entity + * @ccp2: Pointer to ISP CCP2 device + * @vdev: Pointer to v4l device + * return negative error code or zero on success + */ + +int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &ccp2->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&ccp2->video_in, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_ccp2_unregister_entities(ccp2); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP ccp2 initialisation and cleanup + */ + +/* + * omap3isp_ccp2_cleanup - CCP2 un-initialization + * @isp : Pointer to ISP device + */ +void omap3isp_ccp2_cleanup(struct isp_device *isp) +{ +} + +/* + * omap3isp_ccp2_init - CCP2 initialization. + * @isp : Pointer to ISP device + * return negative error code or zero on success + */ +int omap3isp_ccp2_init(struct isp_device *isp) +{ + struct isp_ccp2_device *ccp2 = &isp->isp_ccp2; + int ret; + + init_waitqueue_head(&ccp2->wait); + + /* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with + * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly + * configured. + * + * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c). + */ + if (isp->revision == ISP_REVISION_15_0) + ccp2->phy = &isp->isp_csiphy1; + + ret = ccp2_init_entities(ccp2); + if (ret < 0) + goto out; + + ccp2_reset(ccp2); +out: + if (ret) + omap3isp_ccp2_cleanup(isp); + + return ret; +} diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/video/omap3isp/ispccp2.h new file mode 100644 index 000000000000..5505a86a9a74 --- /dev/null +++ b/drivers/media/video/omap3isp/ispccp2.h @@ -0,0 +1,98 @@ +/* + * ispccp2.h + * + * TI OMAP3 ISP - CCP2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CCP2_H +#define OMAP3_ISP_CCP2_H + +#include <linux/videodev2.h> + +struct isp_device; +struct isp_csiphy; + +/* Sink and source ccp2 pads */ +#define CCP2_PAD_SINK 0 +#define CCP2_PAD_SOURCE 1 +#define CCP2_PADS_NUM 2 + +/* CCP2 input media entity */ +enum ccp2_input_entity { + CCP2_INPUT_NONE, + CCP2_INPUT_SENSOR, + CCP2_INPUT_MEMORY, +}; + +/* CCP2 output media entity */ +enum ccp2_output_entity { + CCP2_OUTPUT_NONE, + CCP2_OUTPUT_CCDC, + CCP2_OUTPUT_MEMORY, +}; + + +/* Logical channel configuration */ +struct isp_interface_lcx_config { + int crc; + u32 data_start; + u32 data_size; + u32 format; +}; + +/* Memory channel configuration */ +struct isp_interface_mem_config { + u32 dst_port; + u32 vsize_count; + u32 hsize_count; + u32 src_ofst; + u32 dst_ofst; +}; + +/* CCP2 device */ +struct isp_ccp2_device { + struct v4l2_subdev subdev; + struct v4l2_mbus_framefmt formats[CCP2_PADS_NUM]; + struct media_pad pads[CCP2_PADS_NUM]; + + enum ccp2_input_entity input; + enum ccp2_output_entity output; + struct isp_interface_lcx_config if_cfg; + struct isp_interface_mem_config mem_cfg; + struct isp_video video_in; + struct isp_csiphy *phy; + unsigned int error; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; +}; + +/* Function declarations */ +int omap3isp_ccp2_init(struct isp_device *isp); +void omap3isp_ccp2_cleanup(struct isp_device *isp); +int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2, + struct v4l2_device *vdev); +void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2); +int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2); + +#endif /* OMAP3_ISP_CCP2_H */ diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c new file mode 100644 index 000000000000..fb503f3db3be --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsi2.c @@ -0,0 +1,1317 @@ +/* + * ispcsi2.c + * + * TI OMAP3 ISP - CSI2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/delay.h> +#include <media/v4l2-common.h> +#include <linux/v4l2-mediabus.h> +#include <linux/mm.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispcsi2.h" + +/* + * csi2_if_enable - Enable CSI2 Receiver interface. + * @enable: enable flag + * + */ +static void csi2_if_enable(struct isp_device *isp, + struct isp_csi2_device *csi2, u8 enable) +{ + struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl; + + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN, + enable ? ISPCSI2_CTRL_IF_EN : 0); + + currctrl->if_enable = enable; +} + +/* + * csi2_recv_config - CSI2 receiver module configuration. + * @currctrl: isp_csi2_ctrl_cfg structure + * + */ +static void csi2_recv_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_ctrl_cfg *currctrl) +{ + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL); + + if (currctrl->frame_mode) + reg |= ISPCSI2_CTRL_FRAME; + else + reg &= ~ISPCSI2_CTRL_FRAME; + + if (currctrl->vp_clk_enable) + reg |= ISPCSI2_CTRL_VP_CLK_EN; + else + reg &= ~ISPCSI2_CTRL_VP_CLK_EN; + + if (currctrl->vp_only_enable) + reg |= ISPCSI2_CTRL_VP_ONLY_EN; + else + reg &= ~ISPCSI2_CTRL_VP_ONLY_EN; + + reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK; + reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT; + + if (currctrl->ecc_enable) + reg |= ISPCSI2_CTRL_ECC_EN; + else + reg &= ~ISPCSI2_CTRL_ECC_EN; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL); +} + +static const unsigned int csi2_input_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, + V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, +}; + +/* To set the format on the CSI2 requires a mapping function that takes + * the following inputs: + * - 2 different formats (at this time) + * - 2 destinations (mem, vp+mem) (vp only handled separately) + * - 2 decompression options (on, off) + * - 2 isp revisions (certain format must be handled differently on OMAP3630) + * Output should be CSI2 frame format code + * Array indices as follows: [format][dest][decompr][is_3630] + * Not all combinations are valid. 0 means invalid. + */ +static const u16 __csi2_fmt_map[2][2][2][2] = { + /* RAW10 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 }, + /* DPCM decompression */ + { 0, 0 }, + }, + /* Output to both */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW10_EXP16_VP, + CSI2_PIX_FMT_RAW10_EXP16_VP }, + /* DPCM decompression */ + { 0, 0 }, + }, + }, + /* RAW10 DPCM8 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 }, + /* DPCM decompression */ + { CSI2_PIX_FMT_RAW8_DPCM10_EXP16, + CSI2_USERDEF_8BIT_DATA1_DPCM10 }, + }, + /* Output to both */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW8_VP, + CSI2_PIX_FMT_RAW8_VP }, + /* DPCM decompression */ + { CSI2_PIX_FMT_RAW8_DPCM10_VP, + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP }, + }, + }, +}; + +/* + * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID + * @csi2: ISP CSI2 device + * + * Returns CSI2 physical format id + */ +static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2) +{ + const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK]; + int fmtidx, destidx, is_3630; + + switch (fmt->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + case V4L2_MBUS_FMT_SRGGB10_1X10: + case V4L2_MBUS_FMT_SBGGR10_1X10: + case V4L2_MBUS_FMT_SGBRG10_1X10: + fmtidx = 0; + break; + case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: + case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8: + case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8: + case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8: + fmtidx = 1; + break; + default: + WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n", + fmt->code); + return 0; + } + + if (!(csi2->output & CSI2_OUTPUT_CCDC) && + !(csi2->output & CSI2_OUTPUT_MEMORY)) { + /* Neither output enabled is a valid combination */ + return CSI2_PIX_FMT_OTHERS; + } + + /* If we need to skip frames at the beginning of the stream disable the + * video port to avoid sending the skipped frames to the CCDC. + */ + destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC); + is_3630 = csi2->isp->revision == ISP_REVISION_15_0; + + return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630]; +} + +/* + * csi2_set_outaddr - Set memory address to save output image + * @csi2: Pointer to ISP CSI2a device. + * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary. + * + * Sets the memory address where the output will be saved. + * + * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte + * boundary. + */ +static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr) +{ + struct isp_device *isp = csi2->isp; + struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0]; + + ctx->ping_addr = addr; + ctx->pong_addr = addr; + isp_reg_writel(isp, ctx->ping_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); + isp_reg_writel(isp, ctx->pong_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); +} + +/* + * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should + * be enabled by CSI2. + * @format_id: mapped format id + * + */ +static inline int is_usr_def_mapping(u32 format_id) +{ + return (format_id & 0x40) ? 1 : 0; +} + +/* + * csi2_ctx_enable - Enable specified CSI2 context + * @ctxnum: Context number, valid between 0 and 7 values. + * @enable: enable + * + */ +static void csi2_ctx_enable(struct isp_device *isp, + struct isp_csi2_device *csi2, u8 ctxnum, u8 enable) +{ + struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum]; + unsigned int skip = 0; + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); + + if (enable) { + if (csi2->frame_skip) + skip = csi2->frame_skip; + else if (csi2->output & CSI2_OUTPUT_MEMORY) + skip = 1; + + reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK; + reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK + | (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT) + | ISPCSI2_CTX_CTRL1_CTX_EN; + } else { + reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN; + } + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); + ctx->enabled = enable; +} + +/* + * csi2_ctx_config - CSI2 context configuration. + * @ctx: context configuration + * + */ +static void csi2_ctx_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_ctx_cfg *ctx) +{ + u32 reg; + + /* Set up CSI2_CTx_CTRL1 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); + + if (ctx->eof_enabled) + reg |= ISPCSI2_CTX_CTRL1_EOF_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN; + + if (ctx->eol_enabled) + reg |= ISPCSI2_CTX_CTRL1_EOL_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN; + + if (ctx->checksum_enabled) + reg |= ISPCSI2_CTX_CTRL1_CS_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_CS_EN; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL2 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); + + reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK); + reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; + + reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK); + reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT; + + if (ctx->dpcm_decompress) { + if (ctx->dpcm_predictor) + reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED; + else + reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED; + } + + if (is_usr_def_mapping(ctx->format_id)) { + reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK; + reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT; + } + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL3 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); + reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK); + reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT); + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); + + /* Set up CSI2_CTx_DAT_OFST */ + reg = isp_reg_readl(isp, csi2->regs1, + ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); + reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK; + reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT; + isp_reg_writel(isp, reg, csi2->regs1, + ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); + + isp_reg_writel(isp, ctx->ping_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); + + isp_reg_writel(isp, ctx->pong_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); +} + +/* + * csi2_timing_config - CSI2 timing configuration. + * @timing: csi2_timing_cfg structure + */ +static void csi2_timing_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_timing_cfg *timing) +{ + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING); + + if (timing->force_rx_mode) + reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); + + if (timing->stop_state_16x) + reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); + + if (timing->stop_state_4x) + reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); + + reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum); + reg |= timing->stop_state_counter << + ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum); + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING); +} + +/* + * csi2_irq_ctx_set - Enables CSI2 Context IRQs. + * @enable: Enable/disable CSI2 Context interrupts + */ +static void csi2_irq_ctx_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ; + int i; + + if (csi2->use_fs_irq) + reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ; + + for (i = 0; i < 8; i++) { + isp_reg_writel(isp, reg, csi2->regs1, + ISPCSI2_CTX_IRQSTATUS(i)); + if (enable) + isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), + reg); + else + isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), + reg); + } +} + +/* + * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs. + * @enable: Enable/disable CSI2 ComplexIO #1 interrupts + */ +static void csi2_irq_complexio1_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg; + reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT | + ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER | + ISPCSI2_PHY_IRQENABLE_STATEULPM5 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 | + ISPCSI2_PHY_IRQENABLE_ERRESC5 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 | + ISPCSI2_PHY_IRQENABLE_STATEULPM4 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 | + ISPCSI2_PHY_IRQENABLE_ERRESC4 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 | + ISPCSI2_PHY_IRQENABLE_STATEULPM3 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 | + ISPCSI2_PHY_IRQENABLE_ERRESC3 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 | + ISPCSI2_PHY_IRQENABLE_STATEULPM2 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 | + ISPCSI2_PHY_IRQENABLE_ERRESC2 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 | + ISPCSI2_PHY_IRQENABLE_STATEULPM1 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 | + ISPCSI2_PHY_IRQENABLE_ERRESC1 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS1; + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); + if (enable) + reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE); + else + reg = 0; + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE); +} + +/* + * csi2_irq_status_set - Enables CSI2 Status IRQs. + * @enable: Enable/disable CSI2 Status interrupts + */ +static void csi2_irq_status_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg; + reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | + ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ | + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ | + ISPCSI2_IRQSTATUS_CONTEXT(0); + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS); + if (enable) + reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE); + else + reg = 0; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE); +} + +/* + * omap3isp_csi2_reset - Resets the CSI2 module. + * + * Must be called with the phy lock held. + * + * Returns 0 if successful, or -EBUSY if power command didn't respond. + */ +int omap3isp_csi2_reset(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + u8 soft_reset_retries = 0; + u32 reg; + int i; + + if (!csi2->available) + return -ENODEV; + + if (csi2->phy->phy_in_use) + return -EBUSY; + + isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_SOFT_RESET); + + do { + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) & + ISPCSI2_SYSSTATUS_RESET_DONE; + if (reg == ISPCSI2_SYSSTATUS_RESET_DONE) + break; + soft_reset_retries++; + if (soft_reset_retries < 5) + udelay(100); + } while (soft_reset_retries < 5); + + if (soft_reset_retries == 5) { + printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n"); + return -EBUSY; + } + + if (isp->revision == ISP_REVISION_15_0) + isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_RESET_CTRL); + + i = 100; + do { + reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1) + & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK; + if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK) + break; + udelay(100); + } while (--i > 0); + + if (i == 0) { + printk(KERN_ERR + "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n"); + return -EBUSY; + } + + if (isp->autoidle) + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | + ISPCSI2_SYSCONFIG_AUTO_IDLE, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART | + ((isp->revision == ISP_REVISION_15_0) ? + ISPCSI2_SYSCONFIG_AUTO_IDLE : 0)); + else + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | + ISPCSI2_SYSCONFIG_AUTO_IDLE, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO); + + return 0; +} + +static int csi2_configure(struct isp_csi2_device *csi2) +{ + const struct isp_v4l2_subdevs_group *pdata; + struct isp_device *isp = csi2->isp; + struct isp_csi2_timing_cfg *timing = &csi2->timing[0]; + struct v4l2_subdev *sensor; + struct media_pad *pad; + + /* + * CSI2 fields that can be updated while the context has + * been enabled or the interface has been enabled are not + * updated dynamically currently. So we do not allow to + * reconfigure if either has been enabled + */ + if (csi2->contexts[0].enabled || csi2->ctrl.if_enable) + return -EBUSY; + + pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = sensor->host_priv; + + csi2->frame_skip = 0; + v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip); + + csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div; + csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE; + csi2->ctrl.ecc_enable = pdata->bus.csi2.crc; + + timing->ionum = 1; + timing->force_rx_mode = 1; + timing->stop_state_16x = 1; + timing->stop_state_4x = 1; + timing->stop_state_counter = 0x1FF; + + /* + * The CSI2 receiver can't do any format conversion except DPCM + * decompression, so every set_format call configures both pads + * and enables DPCM decompression as a special case: + */ + if (csi2->formats[CSI2_PAD_SINK].code != + csi2->formats[CSI2_PAD_SOURCE].code) + csi2->dpcm_decompress = true; + else + csi2->dpcm_decompress = false; + + csi2->contexts[0].format_id = csi2_ctx_map_format(csi2); + + if (csi2->video_out.bpl_padding == 0) + csi2->contexts[0].data_offset = 0; + else + csi2->contexts[0].data_offset = csi2->video_out.bpl_value; + + /* + * Enable end of frame and end of line signals generation for + * context 0. These signals are generated from CSI2 receiver to + * qualify the last pixel of a frame and the last pixel of a line. + * Without enabling the signals CSI2 receiver writes data to memory + * beyond buffer size and/or data line offset is not handled correctly. + */ + csi2->contexts[0].eof_enabled = 1; + csi2->contexts[0].eol_enabled = 1; + + csi2_irq_complexio1_set(isp, csi2, 1); + csi2_irq_ctx_set(isp, csi2, 1); + csi2_irq_status_set(isp, csi2, 1); + + /* Set configuration (timings, format and links) */ + csi2_timing_config(isp, csi2, timing); + csi2_recv_config(isp, csi2, &csi2->ctrl); + csi2_ctx_config(isp, csi2, &csi2->contexts[0]); + + return 0; +} + +/* + * csi2_print_status - Prints CSI2 debug information. + */ +#define CSI2_PRINT_REGISTER(isp, regs, name)\ + dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \ + isp_reg_readl(isp, regs, ISPCSI2_##name)) + +static void csi2_print_status(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + + if (!csi2->available) + return; + + dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n"); + + CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG); + CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE); + CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL); + CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H); + CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE); + CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P); + CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0)); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +/* + * csi2_isr_buffer - Does buffer handling at end-of-frame + * when writing to memory. + */ +static void csi2_isr_buffer(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + struct isp_buffer *buffer; + + csi2_ctx_enable(isp, csi2, 0, 0); + + buffer = omap3isp_video_buffer_next(&csi2->video_out, 0); + + /* + * Let video queue operation restart engine if there is an underrun + * condition. + */ + if (buffer == NULL) + return; + + csi2_set_outaddr(csi2, buffer->isp_addr); + csi2_ctx_enable(isp, csi2, 0, 1); +} + +static void csi2_isr_ctx(struct isp_csi2_device *csi2, + struct isp_csi2_ctx_cfg *ctx) +{ + struct isp_device *isp = csi2->isp; + unsigned int n = ctx->ctxnum; + u32 status; + + status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); + isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); + + /* Propagate frame number */ + if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) { + struct isp_pipeline *pipe = + to_isp_pipeline(&csi2->subdev.entity); + if (pipe->do_propagation) + atomic_inc(&pipe->frame_number); + } + + if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ)) + return; + + /* Skip interrupts until we reach the frame skip count. The CSI2 will be + * automatically disabled, as the frame skip count has been programmed + * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. + * + * It would have been nice to rely on the FRAME_NUMBER interrupt instead + * but it turned out that the interrupt is only generated when the CSI2 + * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased + * correctly and reaches 0 when data is forwarded to the video port only + * but no interrupt arrives). Maybe a CSI2 hardware bug. + */ + if (csi2->frame_skip) { + csi2->frame_skip--; + if (csi2->frame_skip == 0) { + ctx->format_id = csi2_ctx_map_format(csi2); + csi2_ctx_config(isp, csi2, ctx); + csi2_ctx_enable(isp, csi2, n, 1); + } + return; + } + + if (csi2->output & CSI2_OUTPUT_MEMORY) + csi2_isr_buffer(csi2); +} + +/* + * omap3isp_csi2_isr - CSI2 interrupt handling. + * + * Return -EIO on Transmission error + */ +int omap3isp_csi2_isr(struct isp_csi2_device *csi2) +{ + u32 csi2_irqstatus, cpxio1_irqstatus; + struct isp_device *isp = csi2->isp; + int retval = 0; + + if (!csi2->available) + return -ENODEV; + + csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS); + isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS); + + /* Failure Cases */ + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) { + cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1, + ISPCSI2_PHY_IRQSTATUS); + isp_reg_writel(isp, cpxio1_irqstatus, + csi2->regs1, ISPCSI2_PHY_IRQSTATUS); + dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ " + "%x\n", cpxio1_irqstatus); + retval = -EIO; + } + + if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) { + dev_dbg(isp->dev, "CSI2 Err:" + " OCP:%d," + " Short_pack:%d," + " ECC:%d," + " CPXIO2:%d," + " FIFO_OVF:%d," + "\n", + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0); + retval = -EIO; + } + + if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping)) + return 0; + + /* Successful cases */ + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0)) + csi2_isr_ctx(csi2, &csi2->contexts[0]); + + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ) + dev_dbg(isp->dev, "CSI2: ECC correction done\n"); + + return retval; +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +/* + * csi2_queue - Queues the first buffer when using memory output + * @video: The video node + * @buffer: buffer to queue + */ +static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer) +{ + struct isp_device *isp = video->isp; + struct isp_csi2_device *csi2 = &isp->isp_csi2a; + + csi2_set_outaddr(csi2, buffer->isp_addr); + + /* + * If streaming was enabled before there was a buffer queued + * or underrun happened in the ISR, the hardware was not enabled + * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set. + * Enable it now. + */ + if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { + /* Enable / disable context 0 and IRQs */ + csi2_if_enable(isp, csi2, 1); + csi2_ctx_enable(isp, csi2, 0, 1); + isp_video_dmaqueue_flags_clr(&csi2->video_out); + } + + return 0; +} + +static const struct isp_video_operations csi2_ispvideo_ops = { + .queue = csi2_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static struct v4l2_mbus_framefmt * +__csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &csi2->formats[pad]; +} + +static void +csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + enum v4l2_mbus_pixelcode pixelcode; + struct v4l2_mbus_framefmt *format; + const struct isp_format_info *info; + unsigned int i; + + switch (pad) { + case CSI2_PAD_SINK: + /* Clamp the width and height to valid range (1-8191). */ + for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) { + if (fmt->code == csi2_input_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(csi2_input_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + break; + + case CSI2_PAD_SOURCE: + /* Source format same as sink format, except for DPCM + * compression. + */ + pixelcode = fmt->code; + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* + * Only Allow DPCM decompression, and check that the + * pattern is preserved + */ + info = omap3isp_video_format_info(fmt->code); + if (info->uncompressed == pixelcode) + fmt->code = pixelcode; + break; + } + + /* RGB, non-interlaced */ + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; +} + +/* + * csi2_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int csi2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + const struct isp_format_info *info; + + if (code->pad == CSI2_PAD_SINK) { + if (code->index >= ARRAY_SIZE(csi2_input_fmts)) + return -EINVAL; + + code->code = csi2_input_fmts[code->index]; + } else { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + switch (code->index) { + case 0: + /* Passthrough sink pad code */ + code->code = format->code; + break; + case 1: + /* Uncompressed code */ + info = omap3isp_video_format_info(format->code); + if (info->uncompressed == format->code) + return -EINVAL; + + code->code = info->uncompressed; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int csi2_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * csi2_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * csi2_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CSI2_PAD_SINK) { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE, + fmt->which); + *format = fmt->format; + csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which); + } + + return 0; +} + +/* + * csi2_init_formats - Initialize formats on all pads + * @sd: ISP CSI2 V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CSI2_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + csi2_set_format(sd, fh, &format); + + return 0; +} + +/* + * csi2_set_stream - Enable/Disable streaming on the CSI2 module + * @sd: ISP CSI2 V4L2 subdevice + * @enable: ISP pipeline stream state + * + * Return 0 on success or a negative error code otherwise. + */ +static int csi2_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct isp_device *isp = csi2->isp; + struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity); + struct isp_video *video_out = &csi2->video_out; + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (omap3isp_csiphy_acquire(csi2->phy) < 0) + return -ENODEV; + csi2->use_fs_irq = pipe->do_propagation; + if (csi2->output & CSI2_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); + csi2_configure(csi2); + csi2_print_status(csi2); + + /* + * When outputting to memory with no buffer available, let the + * buffer queue handler start the hardware. A DMA queue flag + * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is + * a buffer available. + */ + if (csi2->output & CSI2_OUTPUT_MEMORY && + !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED)) + break; + /* Enable context 0 and IRQs */ + atomic_set(&csi2->stopping, 0); + csi2_ctx_enable(isp, csi2, 0, 1); + csi2_if_enable(isp, csi2, 1); + isp_video_dmaqueue_flags_clr(video_out); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (csi2->state == ISP_PIPELINE_STREAM_STOPPED) + return 0; + if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait, + &csi2->stopping)) + dev_dbg(isp->dev, "%s: module stop timeout.\n", + sd->name); + csi2_ctx_enable(isp, csi2, 0, 0); + csi2_if_enable(isp, csi2, 0); + csi2_irq_ctx_set(isp, csi2, 0); + omap3isp_csiphy_release(csi2->phy); + isp_video_dmaqueue_flags_clr(video_out); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); + break; + } + + csi2->state = enable; + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops csi2_video_ops = { + .s_stream = csi2_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops csi2_pad_ops = { + .enum_mbus_code = csi2_enum_mbus_code, + .enum_frame_size = csi2_enum_frame_size, + .get_fmt = csi2_get_format, + .set_fmt = csi2_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops csi2_ops = { + .video = &csi2_video_ops, + .pad = &csi2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops csi2_internal_ops = { + .open = csi2_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * csi2_link_setup - Setup CSI2 connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int csi2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl; + + /* + * The ISP core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + switch (local->index | media_entity_type(remote->entity)) { + case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_MEMORY) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_MEMORY; + } else { + csi2->output &= ~CSI2_OUTPUT_MEMORY; + } + break; + + case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_CCDC) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_CCDC; + } else { + csi2->output &= ~CSI2_OUTPUT_CCDC; + } + break; + + default: + /* Link from camera to CSI2 is fixed... */ + return -EINVAL; + } + + ctrl->vp_only_enable = + (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true; + ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC); + + return 0; +} + +/* media operations */ +static const struct media_entity_operations csi2_media_ops = { + .link_setup = csi2_link_setup, +}; + +/* + * csi2_init_entities - Initialize subdev and media entity. + * @csi2: Pointer to csi2 structure. + * return -ENOMEM or zero on success + */ +static int csi2_init_entities(struct isp_csi2_device *csi2) +{ + struct v4l2_subdev *sd = &csi2->subdev; + struct media_pad *pads = csi2->pads; + struct media_entity *me = &sd->entity; + int ret; + + v4l2_subdev_init(sd, &csi2_ops); + sd->internal_ops = &csi2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name)); + + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, csi2); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + + me->ops = &csi2_media_ops; + ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + csi2_init_formats(sd, NULL); + + /* Video device node */ + csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + csi2->video_out.ops = &csi2_ispvideo_ops; + csi2->video_out.bpl_alignment = 32; + csi2->video_out.bpl_zero_padding = 1; + csi2->video_out.bpl_max = 0x1ffe0; + csi2->video_out.isp = csi2->isp; + csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + + ret = omap3isp_video_init(&csi2->video_out, "CSI2a"); + if (ret < 0) + return ret; + + /* Connect the CSI2 subdev to the video node. */ + ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, + &csi2->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2) +{ + media_entity_cleanup(&csi2->subdev.entity); + + v4l2_device_unregister_subdev(&csi2->subdev); + omap3isp_video_unregister(&csi2->video_out); +} + +int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &csi2->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&csi2->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_csi2_unregister_entities(csi2); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP CSI2 initialisation and cleanup + */ + +/* + * omap3isp_csi2_cleanup - Routine for module driver cleanup + */ +void omap3isp_csi2_cleanup(struct isp_device *isp) +{ +} + +/* + * omap3isp_csi2_init - Routine for module driver init + */ +int omap3isp_csi2_init(struct isp_device *isp) +{ + struct isp_csi2_device *csi2a = &isp->isp_csi2a; + struct isp_csi2_device *csi2c = &isp->isp_csi2c; + int ret; + + csi2a->isp = isp; + csi2a->available = 1; + csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1; + csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2; + csi2a->phy = &isp->isp_csiphy2; + csi2a->state = ISP_PIPELINE_STREAM_STOPPED; + init_waitqueue_head(&csi2a->wait); + + ret = csi2_init_entities(csi2a); + if (ret < 0) + goto fail; + + if (isp->revision == ISP_REVISION_15_0) { + csi2c->isp = isp; + csi2c->available = 1; + csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1; + csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2; + csi2c->phy = &isp->isp_csiphy1; + csi2c->state = ISP_PIPELINE_STREAM_STOPPED; + init_waitqueue_head(&csi2c->wait); + } + + return 0; +fail: + omap3isp_csi2_cleanup(isp); + return ret; +} diff --git a/drivers/media/video/omap3isp/ispcsi2.h b/drivers/media/video/omap3isp/ispcsi2.h new file mode 100644 index 000000000000..456fb7fb8a0f --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsi2.h @@ -0,0 +1,166 @@ +/* + * ispcsi2.h + * + * TI OMAP3 ISP - CSI2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CSI2_H +#define OMAP3_ISP_CSI2_H + +#include <linux/types.h> +#include <linux/videodev2.h> + +struct isp_csiphy; + +/* This is not an exhaustive list */ +enum isp_csi2_pix_formats { + CSI2_PIX_FMT_OTHERS = 0, + CSI2_PIX_FMT_YUV422_8BIT = 0x1e, + CSI2_PIX_FMT_YUV422_8BIT_VP = 0x9e, + CSI2_PIX_FMT_RAW10_EXP16 = 0xab, + CSI2_PIX_FMT_RAW10_EXP16_VP = 0x12f, + CSI2_PIX_FMT_RAW8 = 0x2a, + CSI2_PIX_FMT_RAW8_DPCM10_EXP16 = 0x2aa, + CSI2_PIX_FMT_RAW8_DPCM10_VP = 0x32a, + CSI2_PIX_FMT_RAW8_VP = 0x12a, + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP = 0x340, + CSI2_USERDEF_8BIT_DATA1_DPCM10 = 0x2c0, + CSI2_USERDEF_8BIT_DATA1 = 0x40, +}; + +enum isp_csi2_irqevents { + OCP_ERR_IRQ = 0x4000, + SHORT_PACKET_IRQ = 0x2000, + ECC_CORRECTION_IRQ = 0x1000, + ECC_NO_CORRECTION_IRQ = 0x800, + COMPLEXIO2_ERR_IRQ = 0x400, + COMPLEXIO1_ERR_IRQ = 0x200, + FIFO_OVF_IRQ = 0x100, + CONTEXT7 = 0x80, + CONTEXT6 = 0x40, + CONTEXT5 = 0x20, + CONTEXT4 = 0x10, + CONTEXT3 = 0x8, + CONTEXT2 = 0x4, + CONTEXT1 = 0x2, + CONTEXT0 = 0x1, +}; + +enum isp_csi2_ctx_irqevents { + CTX_ECC_CORRECTION = 0x100, + CTX_LINE_NUMBER = 0x80, + CTX_FRAME_NUMBER = 0x40, + CTX_CS = 0x20, + CTX_LE = 0x8, + CTX_LS = 0x4, + CTX_FE = 0x2, + CTX_FS = 0x1, +}; + +enum isp_csi2_frame_mode { + ISP_CSI2_FRAME_IMMEDIATE, + ISP_CSI2_FRAME_AFTERFEC, +}; + +#define ISP_CSI2_MAX_CTX_NUM 7 + +struct isp_csi2_ctx_cfg { + u8 ctxnum; /* context number 0 - 7 */ + u8 dpcm_decompress; + + /* Fields in CSI2_CTx_CTRL2 - locked by CSI2_CTx_CTRL1.CTX_EN */ + u8 virtual_id; + u16 format_id; /* as in CSI2_CTx_CTRL2[9:0] */ + u8 dpcm_predictor; /* 1: simple, 0: advanced */ + + /* Fields in CSI2_CTx_CTRL1/3 - Shadowed */ + u16 alpha; + u16 data_offset; + u32 ping_addr; + u32 pong_addr; + u8 eof_enabled; + u8 eol_enabled; + u8 checksum_enabled; + u8 enabled; +}; + +struct isp_csi2_timing_cfg { + u8 ionum; /* IO1 or IO2 as in CSI2_TIMING */ + unsigned force_rx_mode:1; + unsigned stop_state_16x:1; + unsigned stop_state_4x:1; + u16 stop_state_counter; +}; + +struct isp_csi2_ctrl_cfg { + bool vp_clk_enable; + bool vp_only_enable; + u8 vp_out_ctrl; + enum isp_csi2_frame_mode frame_mode; + bool ecc_enable; + bool if_enable; +}; + +#define CSI2_PAD_SINK 0 +#define CSI2_PAD_SOURCE 1 +#define CSI2_PADS_NUM 2 + +#define CSI2_OUTPUT_CCDC (1 << 0) +#define CSI2_OUTPUT_MEMORY (1 << 1) + +struct isp_csi2_device { + struct v4l2_subdev subdev; + struct media_pad pads[CSI2_PADS_NUM]; + struct v4l2_mbus_framefmt formats[CSI2_PADS_NUM]; + + struct isp_video video_out; + struct isp_device *isp; + + u8 available; /* Is the IP present on the silicon? */ + + /* mem resources - enums as defined in enum isp_mem_resources */ + u8 regs1; + u8 regs2; + + u32 output; /* output to CCDC, memory or both? */ + bool dpcm_decompress; + unsigned int frame_skip; + bool use_fs_irq; + + struct isp_csiphy *phy; + struct isp_csi2_ctx_cfg contexts[ISP_CSI2_MAX_CTX_NUM + 1]; + struct isp_csi2_timing_cfg timing[2]; + struct isp_csi2_ctrl_cfg ctrl; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; +}; + +int omap3isp_csi2_isr(struct isp_csi2_device *csi2); +int omap3isp_csi2_reset(struct isp_csi2_device *csi2); +int omap3isp_csi2_init(struct isp_device *isp); +void omap3isp_csi2_cleanup(struct isp_device *isp); +void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2); +int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2, + struct v4l2_device *vdev); +#endif /* OMAP3_ISP_CSI2_H */ diff --git a/drivers/media/video/omap3isp/ispcsiphy.c b/drivers/media/video/omap3isp/ispcsiphy.c new file mode 100644 index 000000000000..5be37ce7d0c2 --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsiphy.c @@ -0,0 +1,247 @@ +/* + * ispcsiphy.c + * + * TI OMAP3 ISP - CSI PHY module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/regulator/consumer.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispcsiphy.h" + +/* + * csiphy_lanes_config - Configuration of CSIPHY lanes. + * + * Updates HW configuration. + * Called with phy->mutex taken. + */ +static void csiphy_lanes_config(struct isp_csiphy *phy) +{ + unsigned int i; + u32 reg; + + reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG); + + for (i = 0; i < phy->num_data_lanes; i++) { + reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) | + ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1)); + reg |= (phy->lanes.data[i].pol << + ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1)); + reg |= (phy->lanes.data[i].pos << + ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1)); + } + + reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK | + ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK); + reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT; + reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG); +} + +/* + * csiphy_power_autoswitch_enable + * @enable: Sets or clears the autoswitch function enable flag. + */ +static void csiphy_power_autoswitch_enable(struct isp_csiphy *phy, bool enable) +{ + isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_PWR_AUTO, + enable ? ISPCSI2_PHY_CFG_PWR_AUTO : 0); +} + +/* + * csiphy_set_power + * @power: Power state to be set. + * + * Returns 0 if successful, or -EBUSY if the retry count is exceeded. + */ +static int csiphy_set_power(struct isp_csiphy *phy, u32 power) +{ + u32 reg; + u8 retry_count; + + isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_PWR_CMD_MASK, power); + + retry_count = 0; + do { + udelay(50); + reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG) & + ISPCSI2_PHY_CFG_PWR_STATUS_MASK; + + if (reg != power >> 2) + retry_count++; + + } while ((reg != power >> 2) && (retry_count < 100)); + + if (retry_count == 100) { + printk(KERN_ERR "CSI2 CIO set power failed!\n"); + return -EBUSY; + } + + return 0; +} + +/* + * csiphy_dphy_config - Configure CSI2 D-PHY parameters. + * + * Called with phy->mutex taken. + */ +static void csiphy_dphy_config(struct isp_csiphy *phy) +{ + u32 reg; + + /* Set up ISPCSIPHY_REG0 */ + reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0); + + reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK | + ISPCSIPHY_REG0_THS_SETTLE_MASK); + reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT; + reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0); + + /* Set up ISPCSIPHY_REG1 */ + reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1); + + reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK | + ISPCSIPHY_REG1_TCLK_MISS_MASK | + ISPCSIPHY_REG1_TCLK_SETTLE_MASK); + reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT; + reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT; + reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1); +} + +static int csiphy_config(struct isp_csiphy *phy, + struct isp_csiphy_dphy_cfg *dphy, + struct isp_csiphy_lanes_cfg *lanes) +{ + unsigned int used_lanes = 0; + unsigned int i; + + /* Clock and data lanes verification */ + for (i = 0; i < phy->num_data_lanes; i++) { + if (lanes->data[i].pol > 1 || lanes->data[i].pos > 3) + return -EINVAL; + + if (used_lanes & (1 << lanes->data[i].pos)) + return -EINVAL; + + used_lanes |= 1 << lanes->data[i].pos; + } + + if (lanes->clk.pol > 1 || lanes->clk.pos > 3) + return -EINVAL; + + if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos)) + return -EINVAL; + + mutex_lock(&phy->mutex); + phy->dphy = *dphy; + phy->lanes = *lanes; + mutex_unlock(&phy->mutex); + + return 0; +} + +int omap3isp_csiphy_acquire(struct isp_csiphy *phy) +{ + int rval; + + if (phy->vdd == NULL) { + dev_err(phy->isp->dev, "Power regulator for CSI PHY not " + "available\n"); + return -ENODEV; + } + + mutex_lock(&phy->mutex); + + rval = regulator_enable(phy->vdd); + if (rval < 0) + goto done; + + omap3isp_csi2_reset(phy->csi2); + + csiphy_dphy_config(phy); + csiphy_lanes_config(phy); + + rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON); + if (rval) { + regulator_disable(phy->vdd); + goto done; + } + + csiphy_power_autoswitch_enable(phy, true); + phy->phy_in_use = 1; + +done: + mutex_unlock(&phy->mutex); + return rval; +} + +void omap3isp_csiphy_release(struct isp_csiphy *phy) +{ + mutex_lock(&phy->mutex); + if (phy->phy_in_use) { + csiphy_power_autoswitch_enable(phy, false); + csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_OFF); + regulator_disable(phy->vdd); + phy->phy_in_use = 0; + } + mutex_unlock(&phy->mutex); +} + +/* + * omap3isp_csiphy_init - Initialize the CSI PHY frontends + */ +int omap3isp_csiphy_init(struct isp_device *isp) +{ + struct isp_csiphy *phy1 = &isp->isp_csiphy1; + struct isp_csiphy *phy2 = &isp->isp_csiphy2; + + isp->platform_cb.csiphy_config = csiphy_config; + + phy2->isp = isp; + phy2->csi2 = &isp->isp_csi2a; + phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES; + phy2->cfg_regs = OMAP3_ISP_IOMEM_CSI2A_REGS1; + phy2->phy_regs = OMAP3_ISP_IOMEM_CSIPHY2; + mutex_init(&phy2->mutex); + + if (isp->revision == ISP_REVISION_15_0) { + phy1->isp = isp; + phy1->csi2 = &isp->isp_csi2c; + phy1->num_data_lanes = ISP_CSIPHY1_NUM_DATA_LANES; + phy1->cfg_regs = OMAP3_ISP_IOMEM_CSI2C_REGS1; + phy1->phy_regs = OMAP3_ISP_IOMEM_CSIPHY1; + mutex_init(&phy1->mutex); + } + + return 0; +} diff --git a/drivers/media/video/omap3isp/ispcsiphy.h b/drivers/media/video/omap3isp/ispcsiphy.h new file mode 100644 index 000000000000..9596dc6830a6 --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsiphy.h @@ -0,0 +1,74 @@ +/* + * ispcsiphy.h + * + * TI OMAP3 ISP - CSI PHY module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CSI_PHY_H +#define OMAP3_ISP_CSI_PHY_H + +struct isp_csi2_device; +struct regulator; + +struct csiphy_lane { + u8 pos; + u8 pol; +}; + +#define ISP_CSIPHY2_NUM_DATA_LANES 2 +#define ISP_CSIPHY1_NUM_DATA_LANES 1 + +struct isp_csiphy_lanes_cfg { + struct csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES]; + struct csiphy_lane clk; +}; + +struct isp_csiphy_dphy_cfg { + u8 ths_term; + u8 ths_settle; + u8 tclk_term; + unsigned tclk_miss:1; + u8 tclk_settle; +}; + +struct isp_csiphy { + struct isp_device *isp; + struct mutex mutex; /* serialize csiphy configuration */ + u8 phy_in_use; + struct isp_csi2_device *csi2; + struct regulator *vdd; + + /* mem resources - enums as defined in enum isp_mem_resources */ + unsigned int cfg_regs; + unsigned int phy_regs; + + u8 num_data_lanes; /* number of CSI2 Data Lanes supported */ + struct isp_csiphy_lanes_cfg lanes; + struct isp_csiphy_dphy_cfg dphy; +}; + +int omap3isp_csiphy_acquire(struct isp_csiphy *phy); +void omap3isp_csiphy_release(struct isp_csiphy *phy); +int omap3isp_csiphy_init(struct isp_device *isp); + +#endif /* OMAP3_ISP_CSI_PHY_H */ diff --git a/drivers/media/video/omap3isp/isph3a.h b/drivers/media/video/omap3isp/isph3a.h new file mode 100644 index 000000000000..fb09fd4ca755 --- /dev/null +++ b/drivers/media/video/omap3isp/isph3a.h @@ -0,0 +1,117 @@ +/* + * isph3a.h + * + * TI OMAP3 ISP - H3A AF module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_H3A_H +#define OMAP3_ISP_H3A_H + +#include <linux/omap3isp.h> + +/* + * ---------- + * -H3A AEWB- + * ---------- + */ + +#define AEWB_PACKET_SIZE 16 +#define AEWB_SATURATION_LIMIT 0x3ff + +/* Flags for changed registers */ +#define PCR_CHNG (1 << 0) +#define AEWWIN1_CHNG (1 << 1) +#define AEWINSTART_CHNG (1 << 2) +#define AEWINBLK_CHNG (1 << 3) +#define AEWSUBWIN_CHNG (1 << 4) +#define PRV_WBDGAIN_CHNG (1 << 5) +#define PRV_WBGAIN_CHNG (1 << 6) + +/* ISPH3A REGISTERS bits */ +#define ISPH3A_PCR_AF_EN (1 << 0) +#define ISPH3A_PCR_AF_ALAW_EN (1 << 1) +#define ISPH3A_PCR_AF_MED_EN (1 << 2) +#define ISPH3A_PCR_AF_BUSY (1 << 15) +#define ISPH3A_PCR_AEW_EN (1 << 16) +#define ISPH3A_PCR_AEW_ALAW_EN (1 << 17) +#define ISPH3A_PCR_AEW_BUSY (1 << 18) +#define ISPH3A_PCR_AEW_MASK (ISPH3A_PCR_AEW_ALAW_EN | \ + ISPH3A_PCR_AEW_AVE2LMT_MASK) + +/* + * -------- + * -H3A AF- + * -------- + */ + +/* Peripheral Revision */ +#define AFPID 0x0 + +#define AFCOEF_OFFSET 0x00000004 /* COEF base address */ + +/* PCR fields */ +#define AF_BUSYAF (1 << 15) +#define AF_FVMODE (1 << 14) +#define AF_RGBPOS (0x7 << 11) +#define AF_MED_TH (0xFF << 3) +#define AF_MED_EN (1 << 2) +#define AF_ALAW_EN (1 << 1) +#define AF_EN (1 << 0) +#define AF_PCR_MASK (AF_FVMODE | AF_RGBPOS | AF_MED_TH | \ + AF_MED_EN | AF_ALAW_EN) + +/* AFPAX1 fields */ +#define AF_PAXW (0x7F << 16) +#define AF_PAXH 0x7F + +/* AFPAX2 fields */ +#define AF_AFINCV (0xF << 13) +#define AF_PAXVC (0x7F << 6) +#define AF_PAXHC 0x3F + +/* AFPAXSTART fields */ +#define AF_PAXSH (0xFFF<<16) +#define AF_PAXSV 0xFFF + +/* COEFFICIENT MASK */ +#define AF_COEF_MASK0 0xFFF +#define AF_COEF_MASK1 (0xFFF<<16) + +/* BIT SHIFTS */ +#define AF_RGBPOS_SHIFT 11 +#define AF_MED_TH_SHIFT 3 +#define AF_PAXW_SHIFT 16 +#define AF_LINE_INCR_SHIFT 13 +#define AF_VT_COUNT_SHIFT 6 +#define AF_HZ_START_SHIFT 16 +#define AF_COEF_SHIFT 16 + +/* Init and cleanup functions */ +int omap3isp_h3a_aewb_init(struct isp_device *isp); +int omap3isp_h3a_af_init(struct isp_device *isp); + +void omap3isp_h3a_aewb_cleanup(struct isp_device *isp); +void omap3isp_h3a_af_cleanup(struct isp_device *isp); + +#endif /* OMAP3_ISP_H3A_H */ diff --git a/drivers/media/video/omap3isp/isph3a_aewb.c b/drivers/media/video/omap3isp/isph3a_aewb.c new file mode 100644 index 000000000000..8068cefd8d89 --- /dev/null +++ b/drivers/media/video/omap3isp/isph3a_aewb.c @@ -0,0 +1,374 @@ +/* + * isph3a.c + * + * TI OMAP3 ISP - H3A module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/slab.h> +#include <linux/uaccess.h> + +#include "isp.h" +#include "isph3a.h" +#include "ispstat.h" + +/* + * h3a_aewb_update_regs - Helper function to update h3a registers. + */ +static void h3a_aewb_setup_regs(struct ispstat *aewb, void *priv) +{ + struct omap3isp_h3a_aewb_config *conf = priv; + u32 pcr; + u32 win1; + u32 start; + u32 blk; + u32 subwin; + + if (aewb->state == ISPSTAT_DISABLED) + return; + + isp_reg_writel(aewb->isp, aewb->active_buf->iommu_addr, + OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWBUFST); + + if (!aewb->update) + return; + + /* Converting config metadata into reg values */ + pcr = conf->saturation_limit << ISPH3A_PCR_AEW_AVE2LMT_SHIFT; + pcr |= !!conf->alaw_enable << ISPH3A_PCR_AEW_ALAW_EN_SHIFT; + + win1 = ((conf->win_height >> 1) - 1) << ISPH3A_AEWWIN1_WINH_SHIFT; + win1 |= ((conf->win_width >> 1) - 1) << ISPH3A_AEWWIN1_WINW_SHIFT; + win1 |= (conf->ver_win_count - 1) << ISPH3A_AEWWIN1_WINVC_SHIFT; + win1 |= (conf->hor_win_count - 1) << ISPH3A_AEWWIN1_WINHC_SHIFT; + + start = conf->hor_win_start << ISPH3A_AEWINSTART_WINSH_SHIFT; + start |= conf->ver_win_start << ISPH3A_AEWINSTART_WINSV_SHIFT; + + blk = conf->blk_ver_win_start << ISPH3A_AEWINBLK_WINSV_SHIFT; + blk |= ((conf->blk_win_height >> 1) - 1) << ISPH3A_AEWINBLK_WINH_SHIFT; + + subwin = ((conf->subsample_ver_inc >> 1) - 1) << + ISPH3A_AEWSUBWIN_AEWINCV_SHIFT; + subwin |= ((conf->subsample_hor_inc >> 1) - 1) << + ISPH3A_AEWSUBWIN_AEWINCH_SHIFT; + + isp_reg_writel(aewb->isp, win1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWWIN1); + isp_reg_writel(aewb->isp, start, OMAP3_ISP_IOMEM_H3A, + ISPH3A_AEWINSTART); + isp_reg_writel(aewb->isp, blk, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINBLK); + isp_reg_writel(aewb->isp, subwin, OMAP3_ISP_IOMEM_H3A, + ISPH3A_AEWSUBWIN); + isp_reg_clr_set(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + ISPH3A_PCR_AEW_MASK, pcr); + + aewb->update = 0; + aewb->config_counter += aewb->inc_config; + aewb->inc_config = 0; + aewb->buf_size = conf->buf_size; +} + +static void h3a_aewb_enable(struct ispstat *aewb, int enable) +{ + if (enable) { + isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + ISPH3A_PCR_AEW_EN); + /* This bit is already set if AF is enabled */ + if (aewb->isp->isp_af.state != ISPSTAT_ENABLED) + isp_reg_set(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_H3A_CLK_EN); + } else { + isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + ISPH3A_PCR_AEW_EN); + /* This bit can't be cleared if AF is enabled */ + if (aewb->isp->isp_af.state != ISPSTAT_ENABLED) + isp_reg_clr(aewb->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_H3A_CLK_EN); + } +} + +static int h3a_aewb_busy(struct ispstat *aewb) +{ + return isp_reg_readl(aewb->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR) + & ISPH3A_PCR_BUSYAEAWB; +} + +static u32 h3a_aewb_get_buf_size(struct omap3isp_h3a_aewb_config *conf) +{ + /* Number of configured windows + extra row for black data */ + u32 win_count = (conf->ver_win_count + 1) * conf->hor_win_count; + + /* + * Unsaturated block counts for each 8 windows. + * 1 extra for the last (win_count % 8) windows if win_count is not + * divisible by 8. + */ + win_count += (win_count + 7) / 8; + + return win_count * AEWB_PACKET_SIZE; +} + +static int h3a_aewb_validate_params(struct ispstat *aewb, void *new_conf) +{ + struct omap3isp_h3a_aewb_config *user_cfg = new_conf; + u32 buf_size; + + if (unlikely(user_cfg->saturation_limit > + OMAP3ISP_AEWB_MAX_SATURATION_LIM)) + return -EINVAL; + + if (unlikely(user_cfg->win_height < OMAP3ISP_AEWB_MIN_WIN_H || + user_cfg->win_height > OMAP3ISP_AEWB_MAX_WIN_H || + user_cfg->win_height & 0x01)) + return -EINVAL; + + if (unlikely(user_cfg->win_width < OMAP3ISP_AEWB_MIN_WIN_W || + user_cfg->win_width > OMAP3ISP_AEWB_MAX_WIN_W || + user_cfg->win_width & 0x01)) + return -EINVAL; + + if (unlikely(user_cfg->ver_win_count < OMAP3ISP_AEWB_MIN_WINVC || + user_cfg->ver_win_count > OMAP3ISP_AEWB_MAX_WINVC)) + return -EINVAL; + + if (unlikely(user_cfg->hor_win_count < OMAP3ISP_AEWB_MIN_WINHC || + user_cfg->hor_win_count > OMAP3ISP_AEWB_MAX_WINHC)) + return -EINVAL; + + if (unlikely(user_cfg->ver_win_start > OMAP3ISP_AEWB_MAX_WINSTART)) + return -EINVAL; + + if (unlikely(user_cfg->hor_win_start > OMAP3ISP_AEWB_MAX_WINSTART)) + return -EINVAL; + + if (unlikely(user_cfg->blk_ver_win_start > OMAP3ISP_AEWB_MAX_WINSTART)) + return -EINVAL; + + if (unlikely(user_cfg->blk_win_height < OMAP3ISP_AEWB_MIN_WIN_H || + user_cfg->blk_win_height > OMAP3ISP_AEWB_MAX_WIN_H || + user_cfg->blk_win_height & 0x01)) + return -EINVAL; + + if (unlikely(user_cfg->subsample_ver_inc < OMAP3ISP_AEWB_MIN_SUB_INC || + user_cfg->subsample_ver_inc > OMAP3ISP_AEWB_MAX_SUB_INC || + user_cfg->subsample_ver_inc & 0x01)) + return -EINVAL; + + if (unlikely(user_cfg->subsample_hor_inc < OMAP3ISP_AEWB_MIN_SUB_INC || + user_cfg->subsample_hor_inc > OMAP3ISP_AEWB_MAX_SUB_INC || + user_cfg->subsample_hor_inc & 0x01)) + return -EINVAL; + + buf_size = h3a_aewb_get_buf_size(user_cfg); + if (buf_size > user_cfg->buf_size) + user_cfg->buf_size = buf_size; + else if (user_cfg->buf_size > OMAP3ISP_AEWB_MAX_BUF_SIZE) + user_cfg->buf_size = OMAP3ISP_AEWB_MAX_BUF_SIZE; + + return 0; +} + +/* + * h3a_aewb_set_params - Helper function to check & store user given params. + * @new_conf: Pointer to AE and AWB parameters struct. + * + * As most of them are busy-lock registers, need to wait until AEW_BUSY = 0 to + * program them during ISR. + */ +static void h3a_aewb_set_params(struct ispstat *aewb, void *new_conf) +{ + struct omap3isp_h3a_aewb_config *user_cfg = new_conf; + struct omap3isp_h3a_aewb_config *cur_cfg = aewb->priv; + int update = 0; + + if (cur_cfg->saturation_limit != user_cfg->saturation_limit) { + cur_cfg->saturation_limit = user_cfg->saturation_limit; + update = 1; + } + if (cur_cfg->alaw_enable != user_cfg->alaw_enable) { + cur_cfg->alaw_enable = user_cfg->alaw_enable; + update = 1; + } + if (cur_cfg->win_height != user_cfg->win_height) { + cur_cfg->win_height = user_cfg->win_height; + update = 1; + } + if (cur_cfg->win_width != user_cfg->win_width) { + cur_cfg->win_width = user_cfg->win_width; + update = 1; + } + if (cur_cfg->ver_win_count != user_cfg->ver_win_count) { + cur_cfg->ver_win_count = user_cfg->ver_win_count; + update = 1; + } + if (cur_cfg->hor_win_count != user_cfg->hor_win_count) { + cur_cfg->hor_win_count = user_cfg->hor_win_count; + update = 1; + } + if (cur_cfg->ver_win_start != user_cfg->ver_win_start) { + cur_cfg->ver_win_start = user_cfg->ver_win_start; + update = 1; + } + if (cur_cfg->hor_win_start != user_cfg->hor_win_start) { + cur_cfg->hor_win_start = user_cfg->hor_win_start; + update = 1; + } + if (cur_cfg->blk_ver_win_start != user_cfg->blk_ver_win_start) { + cur_cfg->blk_ver_win_start = user_cfg->blk_ver_win_start; + update = 1; + } + if (cur_cfg->blk_win_height != user_cfg->blk_win_height) { + cur_cfg->blk_win_height = user_cfg->blk_win_height; + update = 1; + } + if (cur_cfg->subsample_ver_inc != user_cfg->subsample_ver_inc) { + cur_cfg->subsample_ver_inc = user_cfg->subsample_ver_inc; + update = 1; + } + if (cur_cfg->subsample_hor_inc != user_cfg->subsample_hor_inc) { + cur_cfg->subsample_hor_inc = user_cfg->subsample_hor_inc; + update = 1; + } + + if (update || !aewb->configured) { + aewb->inc_config++; + aewb->update = 1; + cur_cfg->buf_size = h3a_aewb_get_buf_size(cur_cfg); + } +} + +static long h3a_aewb_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct ispstat *stat = v4l2_get_subdevdata(sd); + + switch (cmd) { + case VIDIOC_OMAP3ISP_AEWB_CFG: + return omap3isp_stat_config(stat, arg); + case VIDIOC_OMAP3ISP_STAT_REQ: + return omap3isp_stat_request_statistics(stat, arg); + case VIDIOC_OMAP3ISP_STAT_EN: { + unsigned long *en = arg; + return omap3isp_stat_enable(stat, !!*en); + } + } + + return -ENOIOCTLCMD; +} + +static const struct ispstat_ops h3a_aewb_ops = { + .validate_params = h3a_aewb_validate_params, + .set_params = h3a_aewb_set_params, + .setup_regs = h3a_aewb_setup_regs, + .enable = h3a_aewb_enable, + .busy = h3a_aewb_busy, +}; + +static const struct v4l2_subdev_core_ops h3a_aewb_subdev_core_ops = { + .ioctl = h3a_aewb_ioctl, + .subscribe_event = omap3isp_stat_subscribe_event, + .unsubscribe_event = omap3isp_stat_unsubscribe_event, +}; + +static const struct v4l2_subdev_video_ops h3a_aewb_subdev_video_ops = { + .s_stream = omap3isp_stat_s_stream, +}; + +static const struct v4l2_subdev_ops h3a_aewb_subdev_ops = { + .core = &h3a_aewb_subdev_core_ops, + .video = &h3a_aewb_subdev_video_ops, +}; + +/* + * omap3isp_h3a_aewb_init - Module Initialisation. + */ +int omap3isp_h3a_aewb_init(struct isp_device *isp) +{ + struct ispstat *aewb = &isp->isp_aewb; + struct omap3isp_h3a_aewb_config *aewb_cfg; + struct omap3isp_h3a_aewb_config *aewb_recover_cfg; + int ret; + + aewb_cfg = kzalloc(sizeof(*aewb_cfg), GFP_KERNEL); + if (!aewb_cfg) + return -ENOMEM; + + memset(aewb, 0, sizeof(*aewb)); + aewb->ops = &h3a_aewb_ops; + aewb->priv = aewb_cfg; + aewb->dma_ch = -1; + aewb->event_type = V4L2_EVENT_OMAP3ISP_AEWB; + aewb->isp = isp; + + /* Set recover state configuration */ + aewb_recover_cfg = kzalloc(sizeof(*aewb_recover_cfg), GFP_KERNEL); + if (!aewb_recover_cfg) { + dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for " + "recover configuration.\n"); + ret = -ENOMEM; + goto err_recover_alloc; + } + + aewb_recover_cfg->saturation_limit = OMAP3ISP_AEWB_MAX_SATURATION_LIM; + aewb_recover_cfg->win_height = OMAP3ISP_AEWB_MIN_WIN_H; + aewb_recover_cfg->win_width = OMAP3ISP_AEWB_MIN_WIN_W; + aewb_recover_cfg->ver_win_count = OMAP3ISP_AEWB_MIN_WINVC; + aewb_recover_cfg->hor_win_count = OMAP3ISP_AEWB_MIN_WINHC; + aewb_recover_cfg->blk_ver_win_start = aewb_recover_cfg->ver_win_start + + aewb_recover_cfg->win_height * aewb_recover_cfg->ver_win_count; + aewb_recover_cfg->blk_win_height = OMAP3ISP_AEWB_MIN_WIN_H; + aewb_recover_cfg->subsample_ver_inc = OMAP3ISP_AEWB_MIN_SUB_INC; + aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC; + + if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) { + dev_err(aewb->isp->dev, "AEWB: recover configuration is " + "invalid.\n"); + ret = -EINVAL; + goto err_conf; + } + + aewb_recover_cfg->buf_size = h3a_aewb_get_buf_size(aewb_recover_cfg); + aewb->recover_priv = aewb_recover_cfg; + + ret = omap3isp_stat_init(aewb, "AEWB", &h3a_aewb_subdev_ops); + if (ret) + goto err_conf; + + return 0; + +err_conf: + kfree(aewb_recover_cfg); +err_recover_alloc: + kfree(aewb_cfg); + + return ret; +} + +/* + * omap3isp_h3a_aewb_cleanup - Module exit. + */ +void omap3isp_h3a_aewb_cleanup(struct isp_device *isp) +{ + kfree(isp->isp_aewb.priv); + kfree(isp->isp_aewb.recover_priv); + omap3isp_stat_free(&isp->isp_aewb); +} diff --git a/drivers/media/video/omap3isp/isph3a_af.c b/drivers/media/video/omap3isp/isph3a_af.c new file mode 100644 index 000000000000..ba54d0acdecf --- /dev/null +++ b/drivers/media/video/omap3isp/isph3a_af.c @@ -0,0 +1,429 @@ +/* + * isph3a_af.c + * + * TI OMAP3 ISP - H3A AF module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +/* Linux specific include files */ +#include <linux/device.h> +#include <linux/slab.h> + +#include "isp.h" +#include "isph3a.h" +#include "ispstat.h" + +#define IS_OUT_OF_BOUNDS(value, min, max) \ + (((value) < (min)) || ((value) > (max))) + +static void h3a_af_setup_regs(struct ispstat *af, void *priv) +{ + struct omap3isp_h3a_af_config *conf = priv; + u32 pcr; + u32 pax1; + u32 pax2; + u32 paxstart; + u32 coef; + u32 base_coef_set0; + u32 base_coef_set1; + int index; + + if (af->state == ISPSTAT_DISABLED) + return; + + isp_reg_writel(af->isp, af->active_buf->iommu_addr, OMAP3_ISP_IOMEM_H3A, + ISPH3A_AFBUFST); + + if (!af->update) + return; + + /* Configure Hardware Registers */ + pax1 = ((conf->paxel.width >> 1) - 1) << AF_PAXW_SHIFT; + /* Set height in AFPAX1 */ + pax1 |= (conf->paxel.height >> 1) - 1; + isp_reg_writel(af->isp, pax1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX1); + + /* Configure AFPAX2 Register */ + /* Set Line Increment in AFPAX2 Register */ + pax2 = ((conf->paxel.line_inc >> 1) - 1) << AF_LINE_INCR_SHIFT; + /* Set Vertical Count */ + pax2 |= (conf->paxel.v_cnt - 1) << AF_VT_COUNT_SHIFT; + /* Set Horizontal Count */ + pax2 |= (conf->paxel.h_cnt - 1); + isp_reg_writel(af->isp, pax2, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX2); + + /* Configure PAXSTART Register */ + /*Configure Horizontal Start */ + paxstart = conf->paxel.h_start << AF_HZ_START_SHIFT; + /* Configure Vertical Start */ + paxstart |= conf->paxel.v_start; + isp_reg_writel(af->isp, paxstart, OMAP3_ISP_IOMEM_H3A, + ISPH3A_AFPAXSTART); + + /*SetIIRSH Register */ + isp_reg_writel(af->isp, conf->iir.h_start, + OMAP3_ISP_IOMEM_H3A, ISPH3A_AFIIRSH); + + base_coef_set0 = ISPH3A_AFCOEF010; + base_coef_set1 = ISPH3A_AFCOEF110; + for (index = 0; index <= 8; index += 2) { + /*Set IIR Filter0 Coefficients */ + coef = 0; + coef |= conf->iir.coeff_set0[index]; + coef |= conf->iir.coeff_set0[index + 1] << + AF_COEF_SHIFT; + isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A, + base_coef_set0); + base_coef_set0 += AFCOEF_OFFSET; + + /*Set IIR Filter1 Coefficients */ + coef = 0; + coef |= conf->iir.coeff_set1[index]; + coef |= conf->iir.coeff_set1[index + 1] << + AF_COEF_SHIFT; + isp_reg_writel(af->isp, coef, OMAP3_ISP_IOMEM_H3A, + base_coef_set1); + base_coef_set1 += AFCOEF_OFFSET; + } + /* set AFCOEF0010 Register */ + isp_reg_writel(af->isp, conf->iir.coeff_set0[10], + OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF0010); + /* set AFCOEF1010 Register */ + isp_reg_writel(af->isp, conf->iir.coeff_set1[10], + OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF1010); + + /* PCR Register */ + /* Set RGB Position */ + pcr = conf->rgb_pos << AF_RGBPOS_SHIFT; + /* Set Accumulator Mode */ + if (conf->fvmode == OMAP3ISP_AF_MODE_PEAK) + pcr |= AF_FVMODE; + /* Set A-law */ + if (conf->alaw_enable) + pcr |= AF_ALAW_EN; + /* HMF Configurations */ + if (conf->hmf.enable) { + /* Enable HMF */ + pcr |= AF_MED_EN; + /* Set Median Threshold */ + pcr |= conf->hmf.threshold << AF_MED_TH_SHIFT; + } + /* Set PCR Register */ + isp_reg_clr_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + AF_PCR_MASK, pcr); + + af->update = 0; + af->config_counter += af->inc_config; + af->inc_config = 0; + af->buf_size = conf->buf_size; +} + +static void h3a_af_enable(struct ispstat *af, int enable) +{ + if (enable) { + isp_reg_set(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + ISPH3A_PCR_AF_EN); + /* This bit is already set if AEWB is enabled */ + if (af->isp->isp_aewb.state != ISPSTAT_ENABLED) + isp_reg_set(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_H3A_CLK_EN); + } else { + isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, + ISPH3A_PCR_AF_EN); + /* This bit can't be cleared if AEWB is enabled */ + if (af->isp->isp_aewb.state != ISPSTAT_ENABLED) + isp_reg_clr(af->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_H3A_CLK_EN); + } +} + +static int h3a_af_busy(struct ispstat *af) +{ + return isp_reg_readl(af->isp, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR) + & ISPH3A_PCR_BUSYAF; +} + +static u32 h3a_af_get_buf_size(struct omap3isp_h3a_af_config *conf) +{ + return conf->paxel.h_cnt * conf->paxel.v_cnt * OMAP3ISP_AF_PAXEL_SIZE; +} + +/* Function to check paxel parameters */ +static int h3a_af_validate_params(struct ispstat *af, void *new_conf) +{ + struct omap3isp_h3a_af_config *user_cfg = new_conf; + struct omap3isp_h3a_af_paxel *paxel_cfg = &user_cfg->paxel; + struct omap3isp_h3a_af_iir *iir_cfg = &user_cfg->iir; + int index; + u32 buf_size; + + /* Check horizontal Count */ + if (IS_OUT_OF_BOUNDS(paxel_cfg->h_cnt, + OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN, + OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX)) + return -EINVAL; + + /* Check Vertical Count */ + if (IS_OUT_OF_BOUNDS(paxel_cfg->v_cnt, + OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN, + OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX)) + return -EINVAL; + + if (IS_OUT_OF_BOUNDS(paxel_cfg->height, OMAP3ISP_AF_PAXEL_HEIGHT_MIN, + OMAP3ISP_AF_PAXEL_HEIGHT_MAX) || + paxel_cfg->height % 2) + return -EINVAL; + + /* Check width */ + if (IS_OUT_OF_BOUNDS(paxel_cfg->width, OMAP3ISP_AF_PAXEL_WIDTH_MIN, + OMAP3ISP_AF_PAXEL_WIDTH_MAX) || + paxel_cfg->width % 2) + return -EINVAL; + + /* Check Line Increment */ + if (IS_OUT_OF_BOUNDS(paxel_cfg->line_inc, + OMAP3ISP_AF_PAXEL_INCREMENT_MIN, + OMAP3ISP_AF_PAXEL_INCREMENT_MAX) || + paxel_cfg->line_inc % 2) + return -EINVAL; + + /* Check Horizontal Start */ + if ((paxel_cfg->h_start < iir_cfg->h_start) || + IS_OUT_OF_BOUNDS(paxel_cfg->h_start, + OMAP3ISP_AF_PAXEL_HZSTART_MIN, + OMAP3ISP_AF_PAXEL_HZSTART_MAX)) + return -EINVAL; + + /* Check IIR */ + for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) { + if ((iir_cfg->coeff_set0[index]) > OMAP3ISP_AF_COEF_MAX) + return -EINVAL; + + if ((iir_cfg->coeff_set1[index]) > OMAP3ISP_AF_COEF_MAX) + return -EINVAL; + } + + if (IS_OUT_OF_BOUNDS(iir_cfg->h_start, OMAP3ISP_AF_IIRSH_MIN, + OMAP3ISP_AF_IIRSH_MAX)) + return -EINVAL; + + /* Hack: If paxel size is 12, the 10th AF window may be corrupted */ + if ((paxel_cfg->h_cnt * paxel_cfg->v_cnt > 9) && + (paxel_cfg->width * paxel_cfg->height == 12)) + return -EINVAL; + + buf_size = h3a_af_get_buf_size(user_cfg); + if (buf_size > user_cfg->buf_size) + /* User buf_size request wasn't enough */ + user_cfg->buf_size = buf_size; + else if (user_cfg->buf_size > OMAP3ISP_AF_MAX_BUF_SIZE) + user_cfg->buf_size = OMAP3ISP_AF_MAX_BUF_SIZE; + + return 0; +} + +/* Update local parameters */ +static void h3a_af_set_params(struct ispstat *af, void *new_conf) +{ + struct omap3isp_h3a_af_config *user_cfg = new_conf; + struct omap3isp_h3a_af_config *cur_cfg = af->priv; + int update = 0; + int index; + + /* alaw */ + if (cur_cfg->alaw_enable != user_cfg->alaw_enable) { + update = 1; + goto out; + } + + /* hmf */ + if (cur_cfg->hmf.enable != user_cfg->hmf.enable) { + update = 1; + goto out; + } + if (cur_cfg->hmf.threshold != user_cfg->hmf.threshold) { + update = 1; + goto out; + } + + /* rgbpos */ + if (cur_cfg->rgb_pos != user_cfg->rgb_pos) { + update = 1; + goto out; + } + + /* iir */ + if (cur_cfg->iir.h_start != user_cfg->iir.h_start) { + update = 1; + goto out; + } + for (index = 0; index < OMAP3ISP_AF_NUM_COEF; index++) { + if (cur_cfg->iir.coeff_set0[index] != + user_cfg->iir.coeff_set0[index]) { + update = 1; + goto out; + } + if (cur_cfg->iir.coeff_set1[index] != + user_cfg->iir.coeff_set1[index]) { + update = 1; + goto out; + } + } + + /* paxel */ + if ((cur_cfg->paxel.width != user_cfg->paxel.width) || + (cur_cfg->paxel.height != user_cfg->paxel.height) || + (cur_cfg->paxel.h_start != user_cfg->paxel.h_start) || + (cur_cfg->paxel.v_start != user_cfg->paxel.v_start) || + (cur_cfg->paxel.h_cnt != user_cfg->paxel.h_cnt) || + (cur_cfg->paxel.v_cnt != user_cfg->paxel.v_cnt) || + (cur_cfg->paxel.line_inc != user_cfg->paxel.line_inc)) { + update = 1; + goto out; + } + + /* af_mode */ + if (cur_cfg->fvmode != user_cfg->fvmode) + update = 1; + +out: + if (update || !af->configured) { + memcpy(cur_cfg, user_cfg, sizeof(*cur_cfg)); + af->inc_config++; + af->update = 1; + /* + * User might be asked for a bigger buffer than necessary for + * this configuration. In order to return the right amount of + * data during buffer request, let's calculate the size here + * instead of stick with user_cfg->buf_size. + */ + cur_cfg->buf_size = h3a_af_get_buf_size(cur_cfg); + } +} + +static long h3a_af_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct ispstat *stat = v4l2_get_subdevdata(sd); + + switch (cmd) { + case VIDIOC_OMAP3ISP_AF_CFG: + return omap3isp_stat_config(stat, arg); + case VIDIOC_OMAP3ISP_STAT_REQ: + return omap3isp_stat_request_statistics(stat, arg); + case VIDIOC_OMAP3ISP_STAT_EN: { + int *en = arg; + return omap3isp_stat_enable(stat, !!*en); + } + } + + return -ENOIOCTLCMD; + +} + +static const struct ispstat_ops h3a_af_ops = { + .validate_params = h3a_af_validate_params, + .set_params = h3a_af_set_params, + .setup_regs = h3a_af_setup_regs, + .enable = h3a_af_enable, + .busy = h3a_af_busy, +}; + +static const struct v4l2_subdev_core_ops h3a_af_subdev_core_ops = { + .ioctl = h3a_af_ioctl, + .subscribe_event = omap3isp_stat_subscribe_event, + .unsubscribe_event = omap3isp_stat_unsubscribe_event, +}; + +static const struct v4l2_subdev_video_ops h3a_af_subdev_video_ops = { + .s_stream = omap3isp_stat_s_stream, +}; + +static const struct v4l2_subdev_ops h3a_af_subdev_ops = { + .core = &h3a_af_subdev_core_ops, + .video = &h3a_af_subdev_video_ops, +}; + +/* Function to register the AF character device driver. */ +int omap3isp_h3a_af_init(struct isp_device *isp) +{ + struct ispstat *af = &isp->isp_af; + struct omap3isp_h3a_af_config *af_cfg; + struct omap3isp_h3a_af_config *af_recover_cfg; + int ret; + + af_cfg = kzalloc(sizeof(*af_cfg), GFP_KERNEL); + if (af_cfg == NULL) + return -ENOMEM; + + memset(af, 0, sizeof(*af)); + af->ops = &h3a_af_ops; + af->priv = af_cfg; + af->dma_ch = -1; + af->event_type = V4L2_EVENT_OMAP3ISP_AF; + af->isp = isp; + + /* Set recover state configuration */ + af_recover_cfg = kzalloc(sizeof(*af_recover_cfg), GFP_KERNEL); + if (!af_recover_cfg) { + dev_err(af->isp->dev, "AF: cannot allocate memory for recover " + "configuration.\n"); + ret = -ENOMEM; + goto err_recover_alloc; + } + + af_recover_cfg->paxel.h_start = OMAP3ISP_AF_PAXEL_HZSTART_MIN; + af_recover_cfg->paxel.width = OMAP3ISP_AF_PAXEL_WIDTH_MIN; + af_recover_cfg->paxel.height = OMAP3ISP_AF_PAXEL_HEIGHT_MIN; + af_recover_cfg->paxel.h_cnt = OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN; + af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN; + af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN; + if (h3a_af_validate_params(af, af_recover_cfg)) { + dev_err(af->isp->dev, "AF: recover configuration is " + "invalid.\n"); + ret = -EINVAL; + goto err_conf; + } + + af_recover_cfg->buf_size = h3a_af_get_buf_size(af_recover_cfg); + af->recover_priv = af_recover_cfg; + + ret = omap3isp_stat_init(af, "AF", &h3a_af_subdev_ops); + if (ret) + goto err_conf; + + return 0; + +err_conf: + kfree(af_recover_cfg); +err_recover_alloc: + kfree(af_cfg); + + return ret; +} + +void omap3isp_h3a_af_cleanup(struct isp_device *isp) +{ + kfree(isp->isp_af.priv); + kfree(isp->isp_af.recover_priv); + omap3isp_stat_free(&isp->isp_af); +} diff --git a/drivers/media/video/omap3isp/isphist.c b/drivers/media/video/omap3isp/isphist.c new file mode 100644 index 000000000000..1743856b30d1 --- /dev/null +++ b/drivers/media/video/omap3isp/isphist.c @@ -0,0 +1,520 @@ +/* + * isphist.c + * + * TI OMAP3 ISP - Histogram module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/device.h> + +#include "isp.h" +#include "ispreg.h" +#include "isphist.h" + +#define HIST_CONFIG_DMA 1 + +#define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0) + +/* + * hist_reset_mem - clear Histogram memory before start stats engine. + */ +static void hist_reset_mem(struct ispstat *hist) +{ + struct isp_device *isp = hist->isp; + struct omap3isp_hist_config *conf = hist->priv; + unsigned int i; + + isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR); + + /* + * By setting it, the histogram internal buffer is being cleared at the + * same time it's being read. This bit must be cleared afterwards. + */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR); + + /* + * We'll clear 4 words at each iteration for optimization. It avoids + * 3/4 of the jumps. We also know HIST_MEM_SIZE is divisible by 4. + */ + for (i = OMAP3ISP_HIST_MEM_SIZE / 4; i > 0; i--) { + isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + } + isp_reg_clr(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR); + + hist->wait_acc_frames = conf->num_acc_frames; +} + +static void hist_dma_config(struct ispstat *hist) +{ + hist->dma_config.data_type = OMAP_DMA_DATA_TYPE_S32; + hist->dma_config.sync_mode = OMAP_DMA_SYNC_ELEMENT; + hist->dma_config.frame_count = 1; + hist->dma_config.src_amode = OMAP_DMA_AMODE_CONSTANT; + hist->dma_config.src_start = OMAP3ISP_HIST_REG_BASE + ISPHIST_DATA; + hist->dma_config.dst_amode = OMAP_DMA_AMODE_POST_INC; + hist->dma_config.src_or_dst_synch = OMAP_DMA_SRC_SYNC; +} + +/* + * hist_setup_regs - Helper function to update Histogram registers. + */ +static void hist_setup_regs(struct ispstat *hist, void *priv) +{ + struct isp_device *isp = hist->isp; + struct omap3isp_hist_config *conf = priv; + int c; + u32 cnt; + u32 wb_gain; + u32 reg_hor[OMAP3ISP_HIST_MAX_REGIONS]; + u32 reg_ver[OMAP3ISP_HIST_MAX_REGIONS]; + + if (!hist->update || hist->state == ISPSTAT_DISABLED || + hist->state == ISPSTAT_DISABLING) + return; + + cnt = conf->cfa << ISPHIST_CNT_CFA_SHIFT; + + wb_gain = conf->wg[0] << ISPHIST_WB_GAIN_WG00_SHIFT; + wb_gain |= conf->wg[1] << ISPHIST_WB_GAIN_WG01_SHIFT; + wb_gain |= conf->wg[2] << ISPHIST_WB_GAIN_WG02_SHIFT; + if (conf->cfa == OMAP3ISP_HIST_CFA_BAYER) + wb_gain |= conf->wg[3] << ISPHIST_WB_GAIN_WG03_SHIFT; + + /* Regions size and position */ + for (c = 0; c < OMAP3ISP_HIST_MAX_REGIONS; c++) { + if (c < conf->num_regions) { + reg_hor[c] = conf->region[c].h_start << + ISPHIST_REG_START_SHIFT; + reg_hor[c] = conf->region[c].h_end << + ISPHIST_REG_END_SHIFT; + reg_ver[c] = conf->region[c].v_start << + ISPHIST_REG_START_SHIFT; + reg_ver[c] = conf->region[c].v_end << + ISPHIST_REG_END_SHIFT; + } else { + reg_hor[c] = 0; + reg_ver[c] = 0; + } + } + + cnt |= conf->hist_bins << ISPHIST_CNT_BINS_SHIFT; + switch (conf->hist_bins) { + case OMAP3ISP_HIST_BINS_256: + cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 8) << + ISPHIST_CNT_SHIFT_SHIFT; + break; + case OMAP3ISP_HIST_BINS_128: + cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 7) << + ISPHIST_CNT_SHIFT_SHIFT; + break; + case OMAP3ISP_HIST_BINS_64: + cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 6) << + ISPHIST_CNT_SHIFT_SHIFT; + break; + default: /* OMAP3ISP_HIST_BINS_32 */ + cnt |= (ISPHIST_IN_BIT_WIDTH_CCDC - 5) << + ISPHIST_CNT_SHIFT_SHIFT; + break; + } + + hist_reset_mem(hist); + + isp_reg_writel(isp, cnt, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT); + isp_reg_writel(isp, wb_gain, OMAP3_ISP_IOMEM_HIST, ISPHIST_WB_GAIN); + isp_reg_writel(isp, reg_hor[0], OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_HORZ); + isp_reg_writel(isp, reg_ver[0], OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_VERT); + isp_reg_writel(isp, reg_hor[1], OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_HORZ); + isp_reg_writel(isp, reg_ver[1], OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_VERT); + isp_reg_writel(isp, reg_hor[2], OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_HORZ); + isp_reg_writel(isp, reg_ver[2], OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_VERT); + isp_reg_writel(isp, reg_hor[3], OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_HORZ); + isp_reg_writel(isp, reg_ver[3], OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_VERT); + + hist->update = 0; + hist->config_counter += hist->inc_config; + hist->inc_config = 0; + hist->buf_size = conf->buf_size; +} + +static void hist_enable(struct ispstat *hist, int enable) +{ + if (enable) { + isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR, + ISPHIST_PCR_ENABLE); + isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_HIST_CLK_EN); + } else { + isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR, + ISPHIST_PCR_ENABLE); + isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, + ISPCTRL_HIST_CLK_EN); + } +} + +static int hist_busy(struct ispstat *hist) +{ + return isp_reg_readl(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR) + & ISPHIST_PCR_BUSY; +} + +static void hist_dma_cb(int lch, u16 ch_status, void *data) +{ + struct ispstat *hist = data; + + if (ch_status & ~OMAP_DMA_BLOCK_IRQ) { + dev_dbg(hist->isp->dev, "hist: DMA error. status = 0x%04x\n", + ch_status); + omap_stop_dma(lch); + hist_reset_mem(hist); + atomic_set(&hist->buf_err, 1); + } + isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, + ISPHIST_CNT_CLEAR); + + omap3isp_stat_dma_isr(hist); + if (hist->state != ISPSTAT_DISABLED) + omap3isp_hist_dma_done(hist->isp); +} + +static int hist_buf_dma(struct ispstat *hist) +{ + dma_addr_t dma_addr = hist->active_buf->dma_addr; + + if (unlikely(!dma_addr)) { + dev_dbg(hist->isp->dev, "hist: invalid DMA buffer address\n"); + hist_reset_mem(hist); + return STAT_NO_BUF; + } + + isp_reg_writel(hist->isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR); + isp_reg_set(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, + ISPHIST_CNT_CLEAR); + omap3isp_flush(hist->isp); + hist->dma_config.dst_start = dma_addr; + hist->dma_config.elem_count = hist->buf_size / sizeof(u32); + omap_set_dma_params(hist->dma_ch, &hist->dma_config); + + omap_start_dma(hist->dma_ch); + + return STAT_BUF_WAITING_DMA; +} + +static int hist_buf_pio(struct ispstat *hist) +{ + struct isp_device *isp = hist->isp; + u32 *buf = hist->active_buf->virt_addr; + unsigned int i; + + if (!buf) { + dev_dbg(isp->dev, "hist: invalid PIO buffer address\n"); + hist_reset_mem(hist); + return STAT_NO_BUF; + } + + isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR); + + /* + * By setting it, the histogram internal buffer is being cleared at the + * same time it's being read. This bit must be cleared just after all + * data is acquired. + */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLEAR); + + /* + * We'll read 4 times a 4-bytes-word at each iteration for + * optimization. It avoids 3/4 of the jumps. We also know buf_size is + * divisible by 16. + */ + for (i = hist->buf_size / 16; i > 0; i--) { + *buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + *buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + *buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + *buf++ = isp_reg_readl(isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); + } + isp_reg_clr(hist->isp, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, + ISPHIST_CNT_CLEAR); + + return STAT_BUF_DONE; +} + +/* + * hist_buf_process - Callback from ISP driver for HIST interrupt. + */ +static int hist_buf_process(struct ispstat *hist) +{ + struct omap3isp_hist_config *user_cfg = hist->priv; + int ret; + + if (atomic_read(&hist->buf_err) || hist->state != ISPSTAT_ENABLED) { + hist_reset_mem(hist); + return STAT_NO_BUF; + } + + if (--(hist->wait_acc_frames)) + return STAT_NO_BUF; + + if (HIST_USING_DMA(hist)) + ret = hist_buf_dma(hist); + else + ret = hist_buf_pio(hist); + + hist->wait_acc_frames = user_cfg->num_acc_frames; + + return ret; +} + +static u32 hist_get_buf_size(struct omap3isp_hist_config *conf) +{ + return OMAP3ISP_HIST_MEM_SIZE_BINS(conf->hist_bins) * conf->num_regions; +} + +/* + * hist_validate_params - Helper function to check user given params. + * @user_cfg: Pointer to user configuration structure. + * + * Returns 0 on success configuration. + */ +static int hist_validate_params(struct ispstat *hist, void *new_conf) +{ + struct omap3isp_hist_config *user_cfg = new_conf; + int c; + u32 buf_size; + + if (user_cfg->cfa > OMAP3ISP_HIST_CFA_FOVEONX3) + return -EINVAL; + + /* Regions size and position */ + + if ((user_cfg->num_regions < OMAP3ISP_HIST_MIN_REGIONS) || + (user_cfg->num_regions > OMAP3ISP_HIST_MAX_REGIONS)) + return -EINVAL; + + /* Regions */ + for (c = 0; c < user_cfg->num_regions; c++) { + if (user_cfg->region[c].h_start & ~ISPHIST_REG_START_END_MASK) + return -EINVAL; + if (user_cfg->region[c].h_end & ~ISPHIST_REG_START_END_MASK) + return -EINVAL; + if (user_cfg->region[c].v_start & ~ISPHIST_REG_START_END_MASK) + return -EINVAL; + if (user_cfg->region[c].v_end & ~ISPHIST_REG_START_END_MASK) + return -EINVAL; + if (user_cfg->region[c].h_start > user_cfg->region[c].h_end) + return -EINVAL; + if (user_cfg->region[c].v_start > user_cfg->region[c].v_end) + return -EINVAL; + } + + switch (user_cfg->num_regions) { + case 1: + if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_256) + return -EINVAL; + break; + case 2: + if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_128) + return -EINVAL; + break; + default: /* 3 or 4 */ + if (user_cfg->hist_bins > OMAP3ISP_HIST_BINS_64) + return -EINVAL; + break; + } + + buf_size = hist_get_buf_size(user_cfg); + if (buf_size > user_cfg->buf_size) + /* User's buf_size request wasn't enoght */ + user_cfg->buf_size = buf_size; + else if (user_cfg->buf_size > OMAP3ISP_HIST_MAX_BUF_SIZE) + user_cfg->buf_size = OMAP3ISP_HIST_MAX_BUF_SIZE; + + return 0; +} + +static int hist_comp_params(struct ispstat *hist, + struct omap3isp_hist_config *user_cfg) +{ + struct omap3isp_hist_config *cur_cfg = hist->priv; + int c; + + if (cur_cfg->cfa != user_cfg->cfa) + return 1; + + if (cur_cfg->num_acc_frames != user_cfg->num_acc_frames) + return 1; + + if (cur_cfg->hist_bins != user_cfg->hist_bins) + return 1; + + for (c = 0; c < OMAP3ISP_HIST_MAX_WG; c++) { + if (c == 3 && user_cfg->cfa == OMAP3ISP_HIST_CFA_FOVEONX3) + break; + else if (cur_cfg->wg[c] != user_cfg->wg[c]) + return 1; + } + + if (cur_cfg->num_regions != user_cfg->num_regions) + return 1; + + /* Regions */ + for (c = 0; c < user_cfg->num_regions; c++) { + if (cur_cfg->region[c].h_start != user_cfg->region[c].h_start) + return 1; + if (cur_cfg->region[c].h_end != user_cfg->region[c].h_end) + return 1; + if (cur_cfg->region[c].v_start != user_cfg->region[c].v_start) + return 1; + if (cur_cfg->region[c].v_end != user_cfg->region[c].v_end) + return 1; + } + + return 0; +} + +/* + * hist_update_params - Helper function to check and store user given params. + * @new_conf: Pointer to user configuration structure. + */ +static void hist_set_params(struct ispstat *hist, void *new_conf) +{ + struct omap3isp_hist_config *user_cfg = new_conf; + struct omap3isp_hist_config *cur_cfg = hist->priv; + + if (!hist->configured || hist_comp_params(hist, user_cfg)) { + memcpy(cur_cfg, user_cfg, sizeof(*user_cfg)); + if (user_cfg->num_acc_frames == 0) + user_cfg->num_acc_frames = 1; + hist->inc_config++; + hist->update = 1; + /* + * User might be asked for a bigger buffer than necessary for + * this configuration. In order to return the right amount of + * data during buffer request, let's calculate the size here + * instead of stick with user_cfg->buf_size. + */ + cur_cfg->buf_size = hist_get_buf_size(cur_cfg); + + } +} + +static long hist_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct ispstat *stat = v4l2_get_subdevdata(sd); + + switch (cmd) { + case VIDIOC_OMAP3ISP_HIST_CFG: + return omap3isp_stat_config(stat, arg); + case VIDIOC_OMAP3ISP_STAT_REQ: + return omap3isp_stat_request_statistics(stat, arg); + case VIDIOC_OMAP3ISP_STAT_EN: { + int *en = arg; + return omap3isp_stat_enable(stat, !!*en); + } + } + + return -ENOIOCTLCMD; + +} + +static const struct ispstat_ops hist_ops = { + .validate_params = hist_validate_params, + .set_params = hist_set_params, + .setup_regs = hist_setup_regs, + .enable = hist_enable, + .busy = hist_busy, + .buf_process = hist_buf_process, +}; + +static const struct v4l2_subdev_core_ops hist_subdev_core_ops = { + .ioctl = hist_ioctl, + .subscribe_event = omap3isp_stat_subscribe_event, + .unsubscribe_event = omap3isp_stat_unsubscribe_event, +}; + +static const struct v4l2_subdev_video_ops hist_subdev_video_ops = { + .s_stream = omap3isp_stat_s_stream, +}; + +static const struct v4l2_subdev_ops hist_subdev_ops = { + .core = &hist_subdev_core_ops, + .video = &hist_subdev_video_ops, +}; + +/* + * omap3isp_hist_init - Module Initialization. + */ +int omap3isp_hist_init(struct isp_device *isp) +{ + struct ispstat *hist = &isp->isp_hist; + struct omap3isp_hist_config *hist_cfg; + int ret = -1; + + hist_cfg = kzalloc(sizeof(*hist_cfg), GFP_KERNEL); + if (hist_cfg == NULL) + return -ENOMEM; + + memset(hist, 0, sizeof(*hist)); + if (HIST_CONFIG_DMA) + ret = omap_request_dma(OMAP24XX_DMA_NO_DEVICE, "DMA_ISP_HIST", + hist_dma_cb, hist, &hist->dma_ch); + if (ret) { + if (HIST_CONFIG_DMA) + dev_warn(isp->dev, "hist: DMA request channel failed. " + "Using PIO only.\n"); + hist->dma_ch = -1; + } else { + dev_dbg(isp->dev, "hist: DMA channel = %d\n", hist->dma_ch); + hist_dma_config(hist); + omap_enable_dma_irq(hist->dma_ch, OMAP_DMA_BLOCK_IRQ); + } + + hist->ops = &hist_ops; + hist->priv = hist_cfg; + hist->event_type = V4L2_EVENT_OMAP3ISP_HIST; + hist->isp = isp; + + ret = omap3isp_stat_init(hist, "histogram", &hist_subdev_ops); + if (ret) { + kfree(hist_cfg); + if (HIST_USING_DMA(hist)) + omap_free_dma(hist->dma_ch); + } + + return ret; +} + +/* + * omap3isp_hist_cleanup - Module cleanup. + */ +void omap3isp_hist_cleanup(struct isp_device *isp) +{ + if (HIST_USING_DMA(&isp->isp_hist)) + omap_free_dma(isp->isp_hist.dma_ch); + kfree(isp->isp_hist.priv); + omap3isp_stat_free(&isp->isp_hist); +} diff --git a/drivers/media/video/omap3isp/isphist.h b/drivers/media/video/omap3isp/isphist.h new file mode 100644 index 000000000000..0b2a38ec94c4 --- /dev/null +++ b/drivers/media/video/omap3isp/isphist.h @@ -0,0 +1,40 @@ +/* + * isphist.h + * + * TI OMAP3 ISP - Histogram module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_HIST_H +#define OMAP3_ISP_HIST_H + +#include <linux/omap3isp.h> + +#define ISPHIST_IN_BIT_WIDTH_CCDC 10 + +struct isp_device; + +int omap3isp_hist_init(struct isp_device *isp); +void omap3isp_hist_cleanup(struct isp_device *isp); + +#endif /* OMAP3_ISP_HIST */ diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c new file mode 100644 index 000000000000..baf9374201dc --- /dev/null +++ b/drivers/media/video/omap3isp/isppreview.c @@ -0,0 +1,2113 @@ +/* + * isppreview.c + * + * TI OMAP3 ISP driver - Preview module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +#include "isp.h" +#include "ispreg.h" +#include "isppreview.h" + +/* Default values in Office Flourescent Light for RGBtoRGB Blending */ +static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = { + { /* RGB-RGB Matrix */ + {0x01E2, 0x0F30, 0x0FEE}, + {0x0F9B, 0x01AC, 0x0FB9}, + {0x0FE0, 0x0EC0, 0x0260} + }, /* RGB Offset */ + {0x0000, 0x0000, 0x0000} +}; + +/* Default values in Office Flourescent Light for RGB to YUV Conversion*/ +static struct omap3isp_prev_csc flr_prev_csc = { + { /* CSC Coef Matrix */ + {66, 129, 25}, + {-38, -75, 112}, + {112, -94 , -18} + }, /* CSC Offset */ + {0x0, 0x0, 0x0} +}; + +/* Default values in Office Flourescent Light for CFA Gradient*/ +#define FLR_CFA_GRADTHRS_HORZ 0x28 +#define FLR_CFA_GRADTHRS_VERT 0x28 + +/* Default values in Office Flourescent Light for Chroma Suppression*/ +#define FLR_CSUP_GAIN 0x0D +#define FLR_CSUP_THRES 0xEB + +/* Default values in Office Flourescent Light for Noise Filter*/ +#define FLR_NF_STRGTH 0x03 + +/* Default values for White Balance */ +#define FLR_WBAL_DGAIN 0x100 +#define FLR_WBAL_COEF 0x20 + +/* Default values in Office Flourescent Light for Black Adjustment*/ +#define FLR_BLKADJ_BLUE 0x0 +#define FLR_BLKADJ_GREEN 0x0 +#define FLR_BLKADJ_RED 0x0 + +#define DEF_DETECT_CORRECT_VAL 0xe + +#define PREV_MIN_WIDTH 64 +#define PREV_MIN_HEIGHT 8 +#define PREV_MAX_HEIGHT 16384 + +/* + * Coeficient Tables for the submodules in Preview. + * Array is initialised with the values from.the tables text file. + */ + +/* + * CFA Filter Coefficient Table + * + */ +static u32 cfa_coef_table[] = { +#include "cfa_coef_table.h" +}; + +/* + * Default Gamma Correction Table - All components + */ +static u32 gamma_table[] = { +#include "gamma_table.h" +}; + +/* + * Noise Filter Threshold table + */ +static u32 noise_filter_table[] = { +#include "noise_filter_table.h" +}; + +/* + * Luminance Enhancement Table + */ +static u32 luma_enhance_table[] = { +#include "luma_enhance_table.h" +}; + +/* + * preview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview. + * @enable: 1 - Reverse the A-Law done in CCDC. + */ +static void +preview_enable_invalaw(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW); +} + +/* + * preview_enable_drkframe_capture - Enable/Disable of the darkframe capture. + * @prev - + * @enable: 1 - Enable, 0 - Disable + * + * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also + * The proccess is applied for each captured frame. + */ +static void +preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFCAP); +} + +/* + * preview_enable_drkframe - Enable/Disable of the darkframe subtract. + * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is + * subtracted with the pixels in the current frame. + * + * The proccess is applied for each captured frame. + */ +static void +preview_enable_drkframe(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DRKFEN); +} + +/* + * preview_config_drkf_shadcomp - Configures shift value in shading comp. + * @scomp_shtval: 3bit value of shift used in shading compensation. + */ +static void +preview_config_drkf_shadcomp(struct isp_prev_device *prev, + const void *scomp_shtval) +{ + struct isp_device *isp = to_isp_device(prev); + const u32 *shtval = scomp_shtval; + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SCOMP_SFT_MASK, + *shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT); +} + +/* + * preview_enable_hmed - Enables/Disables of the Horizontal Median Filter. + * @enable: 1 - Enables Horizontal Median Filter. + */ +static void +preview_enable_hmed(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_HMEDEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_HMEDEN); +} + +/* + * preview_config_hmed - Configures the Horizontal Median Filter. + * @prev_hmed: Structure containing the odd and even distance between the + * pixels in the image along with the filter threshold. + */ +static void +preview_config_hmed(struct isp_prev_device *prev, const void *prev_hmed) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_hmed *hmed = prev_hmed; + + isp_reg_writel(isp, (hmed->odddist == 1 ? 0 : ISPPRV_HMED_ODDDIST) | + (hmed->evendist == 1 ? 0 : ISPPRV_HMED_EVENDIST) | + (hmed->thres << ISPPRV_HMED_THRESHOLD_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED); +} + +/* + * preview_config_noisefilter - Configures the Noise Filter. + * @prev_nf: Structure containing the noisefilter table, strength to be used + * for the noise filter and the defect correction enable flag. + */ +static void +preview_config_noisefilter(struct isp_prev_device *prev, const void *prev_nf) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_nf *nf = prev_nf; + unsigned int i; + + isp_reg_writel(isp, nf->spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); + isp_reg_writel(isp, ISPPRV_NF_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_NF_TBL_SIZE; i++) { + isp_reg_writel(isp, nf->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_config_dcor - Configures the defect correction + * @prev_dcor: Structure containing the defect correct thresholds + */ +static void +preview_config_dcor(struct isp_prev_device *prev, const void *prev_dcor) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_dcor *dcor = prev_dcor; + + isp_reg_writel(isp, dcor->detect_correct[0], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0); + isp_reg_writel(isp, dcor->detect_correct[1], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1); + isp_reg_writel(isp, dcor->detect_correct[2], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2); + isp_reg_writel(isp, dcor->detect_correct[3], + OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCCOUP, + dcor->couplet_mode_en ? ISPPRV_PCR_DCCOUP : 0); +} + +/* + * preview_config_cfa - Configures the CFA Interpolation parameters. + * @prev_cfa: Structure containing the CFA interpolation table, CFA format + * in the image, vertical and horizontal gradient threshold. + */ +static void +preview_config_cfa(struct isp_prev_device *prev, const void *prev_cfa) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_cfa *cfa = prev_cfa; + unsigned int i; + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAFMT_MASK, + cfa->format << ISPPRV_PCR_CFAFMT_SHIFT); + + isp_reg_writel(isp, + (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) | + (cfa->gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA); + + isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + + for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) { + isp_reg_writel(isp, cfa->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_config_gammacorrn - Configures the Gamma Correction table values + * @gtable: Structure containing the table for red, blue, green gamma table. + */ +static void +preview_config_gammacorrn(struct isp_prev_device *prev, const void *gtable) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_gtables *gt = gtable; + unsigned int i; + + isp_reg_writel(isp, ISPPRV_REDGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->red[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_GREENGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->green[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); + + isp_reg_writel(isp, ISPPRV_BLUEGAMMA_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_GAMMA_TBL_SIZE; i++) + isp_reg_writel(isp, gt->blue[i], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); +} + +/* + * preview_config_luma_enhancement - Sets the Luminance Enhancement table. + * @ytable: Structure containing the table for Luminance Enhancement table. + */ +static void +preview_config_luma_enhancement(struct isp_prev_device *prev, + const void *ytable) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_luma *yt = ytable; + unsigned int i; + + isp_reg_writel(isp, ISPPRV_YENH_TABLE_ADDR, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); + for (i = 0; i < OMAP3ISP_PREV_YENH_TBL_SIZE; i++) { + isp_reg_writel(isp, yt->table[i], + OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + } +} + +/* + * preview_config_chroma_suppression - Configures the Chroma Suppression. + * @csup: Structure containing the threshold value for suppression + * and the hypass filter enable flag. + */ +static void +preview_config_chroma_suppression(struct isp_prev_device *prev, + const void *csup) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_csup *cs = csup; + + isp_reg_writel(isp, + cs->gain | (cs->thres << ISPPRV_CSUP_THRES_SHIFT) | + (cs->hypf_en << ISPPRV_CSUP_HPYF_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP); +} + +/* + * preview_enable_noisefilter - Enables/Disables the Noise Filter. + * @enable: 1 - Enables the Noise Filter. + */ +static void +preview_enable_noisefilter(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_NFEN); +} + +/* + * preview_enable_dcor - Enables/Disables the defect correction. + * @enable: 1 - Enables the defect correction. + */ +static void +preview_enable_dcor(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_DCOREN); +} + +/* + * preview_enable_cfa - Enable/Disable the CFA Interpolation. + * @enable: 1 - Enables the CFA. + */ +static void +preview_enable_cfa(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAEN); +} + +/* + * preview_enable_gammabypass - Enables/Disables the GammaByPass + * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB. + * 0 - Goes through Gamma Correction. input and output is 10bit. + */ +static void +preview_enable_gammabypass(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_GAMMA_BYPASS); +} + +/* + * preview_enable_luma_enhancement - Enables/Disables Luminance Enhancement + * @enable: 1 - Enable the Luminance Enhancement. + */ +static void +preview_enable_luma_enhancement(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YNENHEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YNENHEN); +} + +/* + * preview_enable_chroma_suppression - Enables/Disables Chrominance Suppr. + * @enable: 1 - Enable the Chrominance Suppression. + */ +static void +preview_enable_chroma_suppression(struct isp_prev_device *prev, u8 enable) +{ + struct isp_device *isp = to_isp_device(prev); + + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SUPEN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SUPEN); +} + +/* + * preview_config_whitebalance - Configures the White Balance parameters. + * @prev_wbal: Structure containing the digital gain and white balance + * coefficient. + * + * Coefficient matrix always with default values. + */ +static void +preview_config_whitebalance(struct isp_prev_device *prev, const void *prev_wbal) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_wbal *wbal = prev_wbal; + u32 val; + + isp_reg_writel(isp, wbal->dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN); + + val = wbal->coef0 << ISPPRV_WBGAIN_COEF0_SHIFT; + val |= wbal->coef1 << ISPPRV_WBGAIN_COEF1_SHIFT; + val |= wbal->coef2 << ISPPRV_WBGAIN_COEF2_SHIFT; + val |= wbal->coef3 << ISPPRV_WBGAIN_COEF3_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN); + + isp_reg_writel(isp, + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT | + ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT | + ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT | + ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT | + ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT, + OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL); +} + +/* + * preview_config_blkadj - Configures the Black Adjustment parameters. + * @prev_blkadj: Structure containing the black adjustment towards red, green, + * blue. + */ +static void +preview_config_blkadj(struct isp_prev_device *prev, const void *prev_blkadj) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_blkadj *blkadj = prev_blkadj; + + isp_reg_writel(isp, (blkadj->blue << ISPPRV_BLKADJOFF_B_SHIFT) | + (blkadj->green << ISPPRV_BLKADJOFF_G_SHIFT) | + (blkadj->red << ISPPRV_BLKADJOFF_R_SHIFT), + OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF); +} + +/* + * preview_config_rgb_blending - Configures the RGB-RGB Blending matrix. + * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb + * offset. + */ +static void +preview_config_rgb_blending(struct isp_prev_device *prev, const void *rgb2rgb) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_rgbtorgb *rgbrgb = rgb2rgb; + u32 val; + + val = (rgbrgb->matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT; + val |= (rgbrgb->matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1); + + val = (rgbrgb->matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT; + val |= (rgbrgb->matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2); + + val = (rgbrgb->matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT; + val |= (rgbrgb->matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3); + + val = (rgbrgb->matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT; + val |= (rgbrgb->matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4); + + val = (rgbrgb->matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5); + + val = (rgbrgb->offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT; + val |= (rgbrgb->offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1); + + val = (rgbrgb->offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2); +} + +/* + * Configures the RGB-YCbYCr conversion matrix + * @prev_csc: Structure containing the RGB to YCbYCr matrix and the + * YCbCr offset. + */ +static void +preview_config_rgb_to_ycbcr(struct isp_prev_device *prev, const void *prev_csc) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_csc *csc = prev_csc; + u32 val; + + val = (csc->matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT; + val |= (csc->matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT; + val |= (csc->matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0); + + val = (csc->matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT; + val |= (csc->matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT; + val |= (csc->matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1); + + val = (csc->matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT; + val |= (csc->matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT; + val |= (csc->matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2); + + val = (csc->offset[0] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT; + val |= (csc->offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT; + val |= (csc->offset[2] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT; + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET); +} + +/* + * preview_update_contrast - Updates the contrast. + * @contrast: Pointer to hold the current programmed contrast value. + * + * Value should be programmed before enabling the module. + */ +static void +preview_update_contrast(struct isp_prev_device *prev, u8 contrast) +{ + struct prev_params *params = &prev->params; + + if (params->contrast != (contrast * ISPPRV_CONTRAST_UNITS)) { + params->contrast = contrast * ISPPRV_CONTRAST_UNITS; + prev->update |= PREV_CONTRAST; + } +} + +/* + * preview_config_contrast - Configures the Contrast. + * @params: Contrast value (u8 pointer, U8Q0 format). + * + * Value should be programmed before enabling the module. + */ +static void +preview_config_contrast(struct isp_prev_device *prev, const void *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_CNT_SHIFT, + *(u8 *)params << ISPPRV_CNT_BRT_CNT_SHIFT); +} + +/* + * preview_update_brightness - Updates the brightness in preview module. + * @brightness: Pointer to hold the current programmed brightness value. + * + */ +static void +preview_update_brightness(struct isp_prev_device *prev, u8 brightness) +{ + struct prev_params *params = &prev->params; + + if (params->brightness != (brightness * ISPPRV_BRIGHT_UNITS)) { + params->brightness = brightness * ISPPRV_BRIGHT_UNITS; + prev->update |= PREV_BRIGHTNESS; + } +} + +/* + * preview_config_brightness - Configures the brightness. + * @params: Brightness value (u8 pointer, U8Q0 format). + */ +static void +preview_config_brightness(struct isp_prev_device *prev, const void *params) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, + 0xff << ISPPRV_CNT_BRT_BRT_SHIFT, + *(u8 *)params << ISPPRV_CNT_BRT_BRT_SHIFT); +} + +/* + * preview_config_yc_range - Configures the max and min Y and C values. + * @yclimit: Structure containing the range of Y and C values. + */ +static void +preview_config_yc_range(struct isp_prev_device *prev, const void *yclimit) +{ + struct isp_device *isp = to_isp_device(prev); + const struct omap3isp_prev_yclimit *yc = yclimit; + + isp_reg_writel(isp, + yc->maxC << ISPPRV_SETUP_YC_MAXC_SHIFT | + yc->maxY << ISPPRV_SETUP_YC_MAXY_SHIFT | + yc->minC << ISPPRV_SETUP_YC_MINC_SHIFT | + yc->minY << ISPPRV_SETUP_YC_MINY_SHIFT, + OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC); +} + +/* preview parameters update structure */ +struct preview_update { + int cfg_bit; + int feature_bit; + void (*config)(struct isp_prev_device *, const void *); + void (*enable)(struct isp_prev_device *, u8); +}; + +static struct preview_update update_attrs[] = { + {OMAP3ISP_PREV_LUMAENH, PREV_LUMA_ENHANCE, + preview_config_luma_enhancement, + preview_enable_luma_enhancement}, + {OMAP3ISP_PREV_INVALAW, PREV_INVERSE_ALAW, + NULL, + preview_enable_invalaw}, + {OMAP3ISP_PREV_HRZ_MED, PREV_HORZ_MEDIAN_FILTER, + preview_config_hmed, + preview_enable_hmed}, + {OMAP3ISP_PREV_CFA, PREV_CFA, + preview_config_cfa, + preview_enable_cfa}, + {OMAP3ISP_PREV_CHROMA_SUPP, PREV_CHROMA_SUPPRESS, + preview_config_chroma_suppression, + preview_enable_chroma_suppression}, + {OMAP3ISP_PREV_WB, PREV_WB, + preview_config_whitebalance, + NULL}, + {OMAP3ISP_PREV_BLKADJ, PREV_BLKADJ, + preview_config_blkadj, + NULL}, + {OMAP3ISP_PREV_RGB2RGB, PREV_RGB2RGB, + preview_config_rgb_blending, + NULL}, + {OMAP3ISP_PREV_COLOR_CONV, PREV_COLOR_CONV, + preview_config_rgb_to_ycbcr, + NULL}, + {OMAP3ISP_PREV_YC_LIMIT, PREV_YCLIMITS, + preview_config_yc_range, + NULL}, + {OMAP3ISP_PREV_DEFECT_COR, PREV_DEFECT_COR, + preview_config_dcor, + preview_enable_dcor}, + {OMAP3ISP_PREV_GAMMABYPASS, PREV_GAMMA_BYPASS, + NULL, + preview_enable_gammabypass}, + {OMAP3ISP_PREV_DRK_FRM_CAPTURE, PREV_DARK_FRAME_CAPTURE, + NULL, + preview_enable_drkframe_capture}, + {OMAP3ISP_PREV_DRK_FRM_SUBTRACT, PREV_DARK_FRAME_SUBTRACT, + NULL, + preview_enable_drkframe}, + {OMAP3ISP_PREV_LENS_SHADING, PREV_LENS_SHADING, + preview_config_drkf_shadcomp, + preview_enable_drkframe}, + {OMAP3ISP_PREV_NF, PREV_NOISE_FILTER, + preview_config_noisefilter, + preview_enable_noisefilter}, + {OMAP3ISP_PREV_GAMMA, PREV_GAMMA, + preview_config_gammacorrn, + NULL}, + {-1, PREV_CONTRAST, + preview_config_contrast, + NULL}, + {-1, PREV_BRIGHTNESS, + preview_config_brightness, + NULL}, +}; + +/* + * __preview_get_ptrs - helper function which return pointers to members + * of params and config structures. + * @params - pointer to preview_params structure. + * @param - return pointer to appropriate structure field. + * @configs - pointer to update config structure. + * @config - return pointer to appropriate structure field. + * @bit - for which feature to return pointers. + * Return size of coresponding prev_params member + */ +static u32 +__preview_get_ptrs(struct prev_params *params, void **param, + struct omap3isp_prev_update_config *configs, + void __user **config, u32 bit) +{ +#define CHKARG(cfgs, cfg, field) \ + if (cfgs && cfg) { \ + *(cfg) = (cfgs)->field; \ + } + + switch (bit) { + case PREV_HORZ_MEDIAN_FILTER: + *param = ¶ms->hmed; + CHKARG(configs, config, hmed) + return sizeof(params->hmed); + case PREV_NOISE_FILTER: + *param = ¶ms->nf; + CHKARG(configs, config, nf) + return sizeof(params->nf); + break; + case PREV_CFA: + *param = ¶ms->cfa; + CHKARG(configs, config, cfa) + return sizeof(params->cfa); + case PREV_LUMA_ENHANCE: + *param = ¶ms->luma; + CHKARG(configs, config, luma) + return sizeof(params->luma); + case PREV_CHROMA_SUPPRESS: + *param = ¶ms->csup; + CHKARG(configs, config, csup) + return sizeof(params->csup); + case PREV_DEFECT_COR: + *param = ¶ms->dcor; + CHKARG(configs, config, dcor) + return sizeof(params->dcor); + case PREV_BLKADJ: + *param = ¶ms->blk_adj; + CHKARG(configs, config, blkadj) + return sizeof(params->blk_adj); + case PREV_YCLIMITS: + *param = ¶ms->yclimit; + CHKARG(configs, config, yclimit) + return sizeof(params->yclimit); + case PREV_RGB2RGB: + *param = ¶ms->rgb2rgb; + CHKARG(configs, config, rgb2rgb) + return sizeof(params->rgb2rgb); + case PREV_COLOR_CONV: + *param = ¶ms->rgb2ycbcr; + CHKARG(configs, config, csc) + return sizeof(params->rgb2ycbcr); + case PREV_WB: + *param = ¶ms->wbal; + CHKARG(configs, config, wbal) + return sizeof(params->wbal); + case PREV_GAMMA: + *param = ¶ms->gamma; + CHKARG(configs, config, gamma) + return sizeof(params->gamma); + case PREV_CONTRAST: + *param = ¶ms->contrast; + return 0; + case PREV_BRIGHTNESS: + *param = ¶ms->brightness; + return 0; + default: + *param = NULL; + *config = NULL; + break; + } + return 0; +} + +/* + * preview_config - Copy and update local structure with userspace preview + * configuration. + * @prev: ISP preview engine + * @cfg: Configuration + * + * Return zero if success or -EFAULT if the configuration can't be copied from + * userspace. + */ +static int preview_config(struct isp_prev_device *prev, + struct omap3isp_prev_update_config *cfg) +{ + struct prev_params *params; + struct preview_update *attr; + int i, bit, rval = 0; + + params = &prev->params; + + if (prev->state != ISP_PIPELINE_STREAM_STOPPED) { + unsigned long flags; + + spin_lock_irqsave(&prev->lock, flags); + prev->shadow_update = 1; + spin_unlock_irqrestore(&prev->lock, flags); + } + + for (i = 0; i < ARRAY_SIZE(update_attrs); i++) { + attr = &update_attrs[i]; + bit = 0; + + if (!(cfg->update & attr->cfg_bit)) + continue; + + bit = cfg->flag & attr->cfg_bit; + if (bit) { + void *to = NULL, __user *from = NULL; + unsigned long sz = 0; + + sz = __preview_get_ptrs(params, &to, cfg, &from, + bit); + if (to && from && sz) { + if (copy_from_user(to, from, sz)) { + rval = -EFAULT; + break; + } + } + params->features |= attr->feature_bit; + } else { + params->features &= ~attr->feature_bit; + } + + prev->update |= attr->feature_bit; + } + + prev->shadow_update = 0; + return rval; +} + +/* + * preview_setup_hw - Setup preview registers and/or internal memory + * @prev: pointer to preview private structure + * Note: can be called from interrupt context + * Return none + */ +static void preview_setup_hw(struct isp_prev_device *prev) +{ + struct prev_params *params = &prev->params; + struct preview_update *attr; + int i, bit; + void *param_ptr; + + for (i = 0; i < ARRAY_SIZE(update_attrs); i++) { + attr = &update_attrs[i]; + + if (!(prev->update & attr->feature_bit)) + continue; + bit = params->features & attr->feature_bit; + if (bit) { + if (attr->config) { + __preview_get_ptrs(params, ¶m_ptr, NULL, + NULL, bit); + attr->config(prev, param_ptr); + } + if (attr->enable) + attr->enable(prev, 1); + } else + if (attr->enable) + attr->enable(prev, 0); + + prev->update &= ~attr->feature_bit; + } +} + +/* + * preview_config_ycpos - Configure byte layout of YUV image. + * @mode: Indicates the required byte layout. + */ +static void +preview_config_ycpos(struct isp_prev_device *prev, + enum v4l2_mbus_pixelcode pixelcode) +{ + struct isp_device *isp = to_isp_device(prev); + enum preview_ycpos_mode mode; + + switch (pixelcode) { + case V4L2_MBUS_FMT_YUYV8_1X16: + mode = YCPOS_CrYCbY; + break; + case V4L2_MBUS_FMT_UYVY8_1X16: + mode = YCPOS_YCrYCb; + break; + default: + return; + } + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_YCPOS_CrYCbY, + mode << ISPPRV_PCR_YCPOS_SHIFT); +} + +/* + * preview_config_averager - Enable / disable / configure averager + * @average: Average value to be configured. + */ +static void preview_config_averager(struct isp_prev_device *prev, u8 average) +{ + struct isp_device *isp = to_isp_device(prev); + int reg = 0; + + if (prev->params.cfa.format == OMAP3ISP_CFAFMT_BAYER) + reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | + ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | + average; + else if (prev->params.cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON) + reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT | + ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT | + average; + isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); +} + +/* + * preview_config_input_size - Configure the input frame size + * + * The preview engine crops several rows and columns internally depending on + * which processing blocks are enabled. The driver assumes all those blocks are + * enabled when reporting source pad formats to userspace. If this assumption is + * not true, rows and columns must be manually cropped at the preview engine + * input to avoid overflows at the end of lines and frames. + */ +static void preview_config_input_size(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + struct prev_params *params = &prev->params; + struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK]; + unsigned int sph = 0; + unsigned int eph = format->width - 1; + unsigned int slv = 0; + unsigned int elv = format->height - 1; + + if (prev->input == PREVIEW_INPUT_CCDC) { + sph += 2; + eph -= 2; + } + + /* + * Median filter 4 pixels + * Noise filter 4 pixels, 4 lines + * or faulty pixels correction + * CFA filter 4 pixels, 4 lines in Bayer mode + * 2 lines in other modes + * Color suppression 2 pixels + * or luma enhancement + * ------------------------------------------------------------- + * Maximum total 14 pixels, 8 lines + */ + + if (!(params->features & PREV_CFA)) { + sph += 2; + eph -= 2; + slv += 2; + elv -= 2; + } + if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) { + sph += 2; + eph -= 2; + slv += 2; + elv -= 2; + } + if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) { + sph += 2; + eph -= 2; + } + if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE))) + sph += 2; + + isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph, + OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO); + isp_reg_writel(isp, (slv << ISPPRV_VERT_INFO_SLV_SHIFT) | elv, + OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO); +} + +/* + * preview_config_inlineoffset - Configures the Read address line offset. + * @prev: Preview module + * @offset: Line offset + * + * According to the TRM, the line offset must be aligned on a 32 bytes boundary. + * However, a hardware bug requires the memory start address to be aligned on a + * 64 bytes boundary, so the offset probably should be aligned on 64 bytes as + * well. + */ +static void +preview_config_inlineoffset(struct isp_prev_device *prev, u32 offset) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV, + ISPPRV_RADR_OFFSET); +} + +/* + * preview_set_inaddr - Sets memory address of input frame. + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address from which the input frame is to be read. + */ +static void preview_set_inaddr(struct isp_prev_device *prev, u32 addr) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR); +} + +/* + * preview_config_outlineoffset - Configures the Write address line offset. + * @offset: Line Offset for the preview output. + * + * The offset must be a multiple of 32 bytes. + */ +static void preview_config_outlineoffset(struct isp_prev_device *prev, + u32 offset) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, offset & 0xffff, OMAP3_ISP_IOMEM_PREV, + ISPPRV_WADD_OFFSET); +} + +/* + * preview_set_outaddr - Sets the memory address to store output frame + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address to which the output frame is written. + */ +static void preview_set_outaddr(struct isp_prev_device *prev, u32 addr) +{ + struct isp_device *isp = to_isp_device(prev); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR); +} + +static void preview_adjust_bandwidth(struct isp_prev_device *prev) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity); + struct isp_device *isp = to_isp_device(prev); + const struct v4l2_mbus_framefmt *ifmt = &prev->formats[PREV_PAD_SINK]; + unsigned long l3_ick = pipe->l3_ick; + struct v4l2_fract *timeperframe; + unsigned int cycles_per_frame; + unsigned int requests_per_frame; + unsigned int cycles_per_request; + unsigned int minimum; + unsigned int maximum; + unsigned int value; + + if (prev->input != PREVIEW_INPUT_MEMORY) { + isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_PRV_EXP_MASK); + return; + } + + /* Compute the minimum number of cycles per request, based on the + * pipeline maximum data rate. This is an absolute lower bound if we + * don't want SBL overflows, so round the value up. + */ + cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1, + pipe->max_rate); + minimum = DIV_ROUND_UP(cycles_per_request, 32); + + /* Compute the maximum number of cycles per request, based on the + * requested frame rate. This is a soft upper bound to achieve a frame + * rate equal or higher than the requested value, so round the value + * down. + */ + timeperframe = &pipe->max_timeperframe; + + requests_per_frame = DIV_ROUND_UP(ifmt->width * 2, 256) * ifmt->height; + cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator, + timeperframe->denominator); + cycles_per_request = cycles_per_frame / requests_per_frame; + + maximum = cycles_per_request / 32; + + value = max(minimum, maximum); + + dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_PRV_EXP_MASK, + value << ISPSBL_SDR_REQ_PRV_EXP_SHIFT); +} + +/* + * omap3isp_preview_busy - Gets busy state of preview module. + */ +int omap3isp_preview_busy(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + return isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR) + & ISPPRV_PCR_BUSY; +} + +/* + * omap3isp_preview_restore_context - Restores the values of preview registers + */ +void omap3isp_preview_restore_context(struct isp_device *isp) +{ + isp->isp_prev.update = PREV_FEATURES_END - 1; + preview_setup_hw(&isp->isp_prev); +} + +/* + * preview_print_status - Dump preview module registers to the kernel log + */ +#define PREV_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###PRV " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_##name)) + +static void preview_print_status(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + dev_dbg(isp->dev, "-------------Preview Register dump----------\n"); + + PREV_PRINT_REGISTER(isp, PCR); + PREV_PRINT_REGISTER(isp, HORZ_INFO); + PREV_PRINT_REGISTER(isp, VERT_INFO); + PREV_PRINT_REGISTER(isp, RSDR_ADDR); + PREV_PRINT_REGISTER(isp, RADR_OFFSET); + PREV_PRINT_REGISTER(isp, DSDR_ADDR); + PREV_PRINT_REGISTER(isp, DRKF_OFFSET); + PREV_PRINT_REGISTER(isp, WSDR_ADDR); + PREV_PRINT_REGISTER(isp, WADD_OFFSET); + PREV_PRINT_REGISTER(isp, AVE); + PREV_PRINT_REGISTER(isp, HMED); + PREV_PRINT_REGISTER(isp, NF); + PREV_PRINT_REGISTER(isp, WB_DGAIN); + PREV_PRINT_REGISTER(isp, WBGAIN); + PREV_PRINT_REGISTER(isp, WBSEL); + PREV_PRINT_REGISTER(isp, CFA); + PREV_PRINT_REGISTER(isp, BLKADJOFF); + PREV_PRINT_REGISTER(isp, RGB_MAT1); + PREV_PRINT_REGISTER(isp, RGB_MAT2); + PREV_PRINT_REGISTER(isp, RGB_MAT3); + PREV_PRINT_REGISTER(isp, RGB_MAT4); + PREV_PRINT_REGISTER(isp, RGB_MAT5); + PREV_PRINT_REGISTER(isp, RGB_OFF1); + PREV_PRINT_REGISTER(isp, RGB_OFF2); + PREV_PRINT_REGISTER(isp, CSC0); + PREV_PRINT_REGISTER(isp, CSC1); + PREV_PRINT_REGISTER(isp, CSC2); + PREV_PRINT_REGISTER(isp, CSC_OFFSET); + PREV_PRINT_REGISTER(isp, CNT_BRT); + PREV_PRINT_REGISTER(isp, CSUP); + PREV_PRINT_REGISTER(isp, SETUP_YC); + PREV_PRINT_REGISTER(isp, SET_TBL_ADDR); + PREV_PRINT_REGISTER(isp, CDC_THR0); + PREV_PRINT_REGISTER(isp, CDC_THR1); + PREV_PRINT_REGISTER(isp, CDC_THR2); + PREV_PRINT_REGISTER(isp, CDC_THR3); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * preview_init_params - init image processing parameters. + * @prev: pointer to previewer private structure + * return none + */ +static void preview_init_params(struct isp_prev_device *prev) +{ + struct prev_params *params = &prev->params; + int i = 0; + + /* Init values */ + params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS; + params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS; + params->average = NO_AVE; + params->cfa.format = OMAP3ISP_CFAFMT_BAYER; + memcpy(params->cfa.table, cfa_coef_table, + sizeof(params->cfa.table)); + params->cfa.gradthrs_horz = FLR_CFA_GRADTHRS_HORZ; + params->cfa.gradthrs_vert = FLR_CFA_GRADTHRS_VERT; + params->csup.gain = FLR_CSUP_GAIN; + params->csup.thres = FLR_CSUP_THRES; + params->csup.hypf_en = 0; + memcpy(params->luma.table, luma_enhance_table, + sizeof(params->luma.table)); + params->nf.spread = FLR_NF_STRGTH; + memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table)); + params->dcor.couplet_mode_en = 1; + for (i = 0; i < OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS; i++) + params->dcor.detect_correct[i] = DEF_DETECT_CORRECT_VAL; + memcpy(params->gamma.blue, gamma_table, sizeof(params->gamma.blue)); + memcpy(params->gamma.green, gamma_table, sizeof(params->gamma.green)); + memcpy(params->gamma.red, gamma_table, sizeof(params->gamma.red)); + params->wbal.dgain = FLR_WBAL_DGAIN; + params->wbal.coef0 = FLR_WBAL_COEF; + params->wbal.coef1 = FLR_WBAL_COEF; + params->wbal.coef2 = FLR_WBAL_COEF; + params->wbal.coef3 = FLR_WBAL_COEF; + params->blk_adj.red = FLR_BLKADJ_RED; + params->blk_adj.green = FLR_BLKADJ_GREEN; + params->blk_adj.blue = FLR_BLKADJ_BLUE; + params->rgb2rgb = flr_rgb2rgb; + params->rgb2ycbcr = flr_prev_csc; + params->yclimit.minC = ISPPRV_YC_MIN; + params->yclimit.maxC = ISPPRV_YC_MAX; + params->yclimit.minY = ISPPRV_YC_MIN; + params->yclimit.maxY = ISPPRV_YC_MAX; + + params->features = PREV_CFA | PREV_DEFECT_COR | PREV_NOISE_FILTER + | PREV_GAMMA | PREV_BLKADJ | PREV_YCLIMITS + | PREV_RGB2RGB | PREV_COLOR_CONV | PREV_WB + | PREV_BRIGHTNESS | PREV_CONTRAST; + + prev->update = PREV_FEATURES_END - 1; +} + +/* + * preview_max_out_width - Handle previewer hardware ouput limitations + * @isp_revision : ISP revision + * returns maximum width output for current isp revision + */ +static unsigned int preview_max_out_width(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + switch (isp->revision) { + case ISP_REVISION_1_0: + return ISPPRV_MAXOUTPUT_WIDTH; + + case ISP_REVISION_2_0: + default: + return ISPPRV_MAXOUTPUT_WIDTH_ES2; + + case ISP_REVISION_15_0: + return ISPPRV_MAXOUTPUT_WIDTH_3630; + } +} + +static void preview_configure(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + struct v4l2_mbus_framefmt *format; + unsigned int max_out_width; + unsigned int format_avg; + + preview_setup_hw(prev); + + if (prev->output & PREVIEW_OUTPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + + if (prev->output & PREVIEW_OUTPUT_RESIZER) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + + /* PREV_PAD_SINK */ + format = &prev->formats[PREV_PAD_SINK]; + + preview_adjust_bandwidth(prev); + + preview_config_input_size(prev); + + if (prev->input == PREVIEW_INPUT_CCDC) + preview_config_inlineoffset(prev, 0); + else + preview_config_inlineoffset(prev, + ALIGN(format->width, 0x20) * 2); + + /* PREV_PAD_SOURCE */ + format = &prev->formats[PREV_PAD_SOURCE]; + + if (prev->output & PREVIEW_OUTPUT_MEMORY) + preview_config_outlineoffset(prev, + ALIGN(format->width, 0x10) * 2); + + max_out_width = preview_max_out_width(prev); + + format_avg = fls(DIV_ROUND_UP(format->width, max_out_width) - 1); + preview_config_averager(prev, format_avg); + preview_config_ycpos(prev, format->code); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +static void preview_enable_oneshot(struct isp_prev_device *prev) +{ + struct isp_device *isp = to_isp_device(prev); + + /* The PCR.SOURCE bit is automatically reset to 0 when the PCR.ENABLE + * bit is set. As the preview engine is used in single-shot mode, we + * need to set PCR.SOURCE before enabling the preview engine. + */ + if (prev->input == PREVIEW_INPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SOURCE); + + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_EN | ISPPRV_PCR_ONESHOT); +} + +void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev) +{ + /* + * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun + * condition, the module was paused and now we have a buffer queued + * on the output again. Restart the pipeline if running in continuous + * mode. + */ + if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS && + prev->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) { + preview_enable_oneshot(prev); + isp_video_dmaqueue_flags_clr(&prev->video_out); + } +} + +static void preview_isr_buffer(struct isp_prev_device *prev) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&prev->subdev.entity); + struct isp_buffer *buffer; + int restart = 0; + + if (prev->input == PREVIEW_INPUT_MEMORY) { + buffer = omap3isp_video_buffer_next(&prev->video_in, + prev->error); + if (buffer != NULL) + preview_set_inaddr(prev, buffer->isp_addr); + pipe->state |= ISP_PIPELINE_IDLE_INPUT; + } + + if (prev->output & PREVIEW_OUTPUT_MEMORY) { + buffer = omap3isp_video_buffer_next(&prev->video_out, + prev->error); + if (buffer != NULL) { + preview_set_outaddr(prev, buffer->isp_addr); + restart = 1; + } + pipe->state |= ISP_PIPELINE_IDLE_OUTPUT; + } + + switch (prev->state) { + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + break; + + case ISP_PIPELINE_STREAM_CONTINUOUS: + /* If an underrun occurs, the video queue operation handler will + * restart the preview engine. Otherwise restart it immediately. + */ + if (restart) + preview_enable_oneshot(prev); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + default: + return; + } + + prev->error = 0; +} + +/* + * omap3isp_preview_isr - ISP preview engine interrupt handler + * + * Manage the preview engine video buffers and configure shadowed registers. + */ +void omap3isp_preview_isr(struct isp_prev_device *prev) +{ + unsigned long flags; + + if (omap3isp_module_sync_is_stopping(&prev->wait, &prev->stopping)) + return; + + spin_lock_irqsave(&prev->lock, flags); + if (prev->shadow_update) + goto done; + + preview_setup_hw(prev); + preview_config_input_size(prev); + +done: + spin_unlock_irqrestore(&prev->lock, flags); + + if (prev->input == PREVIEW_INPUT_MEMORY || + prev->output & PREVIEW_OUTPUT_MEMORY) + preview_isr_buffer(prev); + else if (prev->state == ISP_PIPELINE_STREAM_CONTINUOUS) + preview_enable_oneshot(prev); +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +static int preview_video_queue(struct isp_video *video, + struct isp_buffer *buffer) +{ + struct isp_prev_device *prev = &video->isp->isp_prev; + + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + preview_set_inaddr(prev, buffer->isp_addr); + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + preview_set_outaddr(prev, buffer->isp_addr); + + return 0; +} + +static const struct isp_video_operations preview_video_ops = { + .queue = preview_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +/* + * preview_s_ctrl - Handle set control subdev method + * @ctrl: pointer to v4l2 control structure + */ +static int preview_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isp_prev_device *prev = + container_of(ctrl->handler, struct isp_prev_device, ctrls); + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + preview_update_brightness(prev, ctrl->val); + break; + case V4L2_CID_CONTRAST: + preview_update_contrast(prev, ctrl->val); + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops preview_ctrl_ops = { + .s_ctrl = preview_s_ctrl, +}; + +/* + * preview_ioctl - Handle preview module private ioctl's + * @prev: pointer to preview context structure + * @cmd: configuration command + * @arg: configuration argument + * return -EINVAL or zero on success + */ +static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + + switch (cmd) { + case VIDIOC_OMAP3ISP_PRV_CFG: + return preview_config(prev, arg); + + default: + return -ENOIOCTLCMD; + } +} + +/* + * preview_set_stream - Enable/Disable streaming on preview subdev + * @sd : pointer to v4l2 subdev structure + * @enable: 1 == Enable, 0 == Disable + * return -EINVAL or zero on sucess + */ +static int preview_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct isp_video *video_out = &prev->video_out; + struct isp_device *isp = to_isp_device(prev); + struct device *dev = to_device(prev); + unsigned long flags; + + if (prev->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + + omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_PREVIEW); + preview_configure(prev); + atomic_set(&prev->stopping, 0); + prev->error = 0; + preview_print_status(prev); + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (prev->output & PREVIEW_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + + if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED || + !(prev->output & PREVIEW_OUTPUT_MEMORY)) + preview_enable_oneshot(prev); + + isp_video_dmaqueue_flags_clr(video_out); + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (prev->input == PREVIEW_INPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_READ); + if (prev->output & PREVIEW_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + + preview_enable_oneshot(prev); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (omap3isp_module_sync_idle(&sd->entity, &prev->wait, + &prev->stopping)) + dev_dbg(dev, "%s: stop timeout.\n", sd->name); + spin_lock_irqsave(&prev->lock, flags); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_READ); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_PREVIEW_WRITE); + omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_PREVIEW); + spin_unlock_irqrestore(&prev->lock, flags); + isp_video_dmaqueue_flags_clr(video_out); + break; + } + + prev->state = enable; + return 0; +} + +static struct v4l2_mbus_framefmt * +__preview_get_format(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &prev->formats[pad]; +} + +/* previewer format descriptions */ +static const unsigned int preview_input_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SGBRG10_1X10, +}; + +static const unsigned int preview_output_fmts[] = { + V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, +}; + +/* + * preview_try_format - Handle try format by pad subdev method + * @prev: ISP preview device + * @fh : V4L2 subdev file handle + * @pad: pad num + * @fmt: pointer to v4l2 format structure + */ +static void preview_try_format(struct isp_prev_device *prev, + struct v4l2_subdev_fh *fh, unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + struct v4l2_mbus_framefmt *format; + unsigned int max_out_width; + enum v4l2_mbus_pixelcode pixelcode; + unsigned int i; + + max_out_width = preview_max_out_width(prev); + + switch (pad) { + case PREV_PAD_SINK: + /* When reading data from the CCDC, the input size has already + * been mangled by the CCDC output pad so it can be accepted + * as-is. + * + * When reading data from memory, clamp the requested width and + * height. The TRM doesn't specify a minimum input height, make + * sure we got enough lines to enable the noise filter and color + * filter array interpolation. + */ + if (prev->input == PREVIEW_INPUT_MEMORY) { + fmt->width = clamp_t(u32, fmt->width, PREV_MIN_WIDTH, + max_out_width * 8); + fmt->height = clamp_t(u32, fmt->height, PREV_MIN_HEIGHT, + PREV_MAX_HEIGHT); + } + + fmt->colorspace = V4L2_COLORSPACE_SRGB; + + for (i = 0; i < ARRAY_SIZE(preview_input_fmts); i++) { + if (fmt->code == preview_input_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(preview_input_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + break; + + case PREV_PAD_SOURCE: + pixelcode = fmt->code; + format = __preview_get_format(prev, fh, PREV_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* The preview module output size is configurable through the + * input interface (horizontal and vertical cropping) and the + * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In + * spite of this, hardcode the output size to the biggest + * possible value for simplicity reasons. + */ + switch (pixelcode) { + case V4L2_MBUS_FMT_YUYV8_1X16: + case V4L2_MBUS_FMT_UYVY8_1X16: + fmt->code = pixelcode; + break; + + default: + fmt->code = V4L2_MBUS_FMT_YUYV8_1X16; + break; + } + + /* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped + * from the left and right sides when the input source is the + * CCDC. This seems not to be needed in practice, investigation + * is required. + */ + if (prev->input == PREVIEW_INPUT_CCDC) + fmt->width -= 4; + + /* The preview module can output a maximum of 3312 pixels + * horizontally due to fixed memory-line sizes. Compute the + * horizontal averaging factor accordingly. Note that the limit + * applies to the noise filter and CFA interpolation blocks, so + * it doesn't take cropping by further blocks into account. + * + * ES 1.0 hardware revision is limited to 1280 pixels + * horizontally. + */ + fmt->width >>= fls(DIV_ROUND_UP(fmt->width, max_out_width) - 1); + + /* Assume that all blocks are enabled and crop pixels and lines + * accordingly. See preview_config_input_size() for more + * information. + */ + fmt->width -= 14; + fmt->height -= 8; + + fmt->colorspace = V4L2_COLORSPACE_JPEG; + break; + } + + fmt->field = V4L2_FIELD_NONE; +} + +/* + * preview_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int preview_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + switch (code->pad) { + case PREV_PAD_SINK: + if (code->index >= ARRAY_SIZE(preview_input_fmts)) + return -EINVAL; + + code->code = preview_input_fmts[code->index]; + break; + case PREV_PAD_SOURCE: + if (code->index >= ARRAY_SIZE(preview_output_fmts)) + return -EINVAL; + + code->code = preview_output_fmts[code->index]; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int preview_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + preview_try_format(prev, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * preview_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __preview_get_format(prev, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * preview_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int preview_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __preview_get_format(prev, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + preview_try_format(prev, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == PREV_PAD_SINK) { + format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, + fmt->which); + *format = fmt->format; + preview_try_format(prev, fh, PREV_PAD_SOURCE, format, + fmt->which); + } + + return 0; +} + +/* + * preview_init_formats - Initialize formats on all pads + * @sd: ISP preview V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int preview_init_formats(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = PREV_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + preview_set_format(sd, fh, &format); + + return 0; +} + +/* subdev core operations */ +static const struct v4l2_subdev_core_ops preview_v4l2_core_ops = { + .ioctl = preview_ioctl, +}; + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops preview_v4l2_video_ops = { + .s_stream = preview_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops preview_v4l2_pad_ops = { + .enum_mbus_code = preview_enum_mbus_code, + .enum_frame_size = preview_enum_frame_size, + .get_fmt = preview_get_format, + .set_fmt = preview_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops preview_v4l2_ops = { + .core = &preview_v4l2_core_ops, + .video = &preview_v4l2_video_ops, + .pad = &preview_v4l2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops preview_v4l2_internal_ops = { + .open = preview_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * preview_link_setup - Setup previewer connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int preview_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_prev_device *prev = v4l2_get_subdevdata(sd); + + switch (local->index | media_entity_type(remote->entity)) { + case PREV_PAD_SINK | MEDIA_ENT_T_DEVNODE: + /* read from memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->input == PREVIEW_INPUT_CCDC) + return -EBUSY; + prev->input = PREVIEW_INPUT_MEMORY; + } else { + if (prev->input == PREVIEW_INPUT_MEMORY) + prev->input = PREVIEW_INPUT_NONE; + } + break; + + case PREV_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* read from ccdc */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->input == PREVIEW_INPUT_MEMORY) + return -EBUSY; + prev->input = PREVIEW_INPUT_CCDC; + } else { + if (prev->input == PREVIEW_INPUT_CCDC) + prev->input = PREVIEW_INPUT_NONE; + } + break; + + /* + * The ISP core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + case PREV_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + /* write to memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->output & ~PREVIEW_OUTPUT_MEMORY) + return -EBUSY; + prev->output |= PREVIEW_OUTPUT_MEMORY; + } else { + prev->output &= ~PREVIEW_OUTPUT_MEMORY; + } + break; + + case PREV_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + /* write to resizer */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (prev->output & ~PREVIEW_OUTPUT_RESIZER) + return -EBUSY; + prev->output |= PREVIEW_OUTPUT_RESIZER; + } else { + prev->output &= ~PREVIEW_OUTPUT_RESIZER; + } + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations preview_media_ops = { + .link_setup = preview_link_setup, +}; + +/* + * review_init_entities - Initialize subdev and media entity. + * @prev : Pointer to preview structure + * return -ENOMEM or zero on success + */ +static int preview_init_entities(struct isp_prev_device *prev) +{ + struct v4l2_subdev *sd = &prev->subdev; + struct media_pad *pads = prev->pads; + struct media_entity *me = &sd->entity; + int ret; + + prev->input = PREVIEW_INPUT_NONE; + + v4l2_subdev_init(sd, &preview_v4l2_ops); + sd->internal_ops = &preview_v4l2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP preview", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, prev); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&prev->ctrls, 2); + v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_BRIGHTNESS, + ISPPRV_BRIGHT_LOW, ISPPRV_BRIGHT_HIGH, + ISPPRV_BRIGHT_STEP, ISPPRV_BRIGHT_DEF); + v4l2_ctrl_new_std(&prev->ctrls, &preview_ctrl_ops, V4L2_CID_CONTRAST, + ISPPRV_CONTRAST_LOW, ISPPRV_CONTRAST_HIGH, + ISPPRV_CONTRAST_STEP, ISPPRV_CONTRAST_DEF); + v4l2_ctrl_handler_setup(&prev->ctrls); + sd->ctrl_handler = &prev->ctrls; + + pads[PREV_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[PREV_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &preview_media_ops; + ret = media_entity_init(me, PREV_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + preview_init_formats(sd, NULL); + + /* According to the OMAP34xx TRM, video buffers need to be aligned on a + * 32 bytes boundary. However, an undocumented hardware bug requires a + * 64 bytes boundary at the preview engine input. + */ + prev->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + prev->video_in.ops = &preview_video_ops; + prev->video_in.isp = to_isp_device(prev); + prev->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + prev->video_in.bpl_alignment = 64; + prev->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + prev->video_out.ops = &preview_video_ops; + prev->video_out.isp = to_isp_device(prev); + prev->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + prev->video_out.bpl_alignment = 32; + + ret = omap3isp_video_init(&prev->video_in, "preview"); + if (ret < 0) + return ret; + + ret = omap3isp_video_init(&prev->video_out, "preview"); + if (ret < 0) + return ret; + + /* Connect the video nodes to the previewer subdev. */ + ret = media_entity_create_link(&prev->video_in.video.entity, 0, + &prev->subdev.entity, PREV_PAD_SINK, 0); + if (ret < 0) + return ret; + + ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE, + &prev->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap3isp_preview_unregister_entities(struct isp_prev_device *prev) +{ + media_entity_cleanup(&prev->subdev.entity); + + v4l2_device_unregister_subdev(&prev->subdev); + v4l2_ctrl_handler_free(&prev->ctrls); + omap3isp_video_unregister(&prev->video_in); + omap3isp_video_unregister(&prev->video_out); +} + +int omap3isp_preview_register_entities(struct isp_prev_device *prev, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &prev->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&prev->video_in, vdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&prev->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_preview_unregister_entities(prev); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP previewer initialisation and cleanup + */ + +void omap3isp_preview_cleanup(struct isp_device *isp) +{ +} + +/* + * isp_preview_init - Previewer initialization. + * @dev : Pointer to ISP device + * return -ENOMEM or zero on success + */ +int omap3isp_preview_init(struct isp_device *isp) +{ + struct isp_prev_device *prev = &isp->isp_prev; + int ret; + + spin_lock_init(&prev->lock); + init_waitqueue_head(&prev->wait); + preview_init_params(prev); + + ret = preview_init_entities(prev); + if (ret < 0) + goto out; + +out: + if (ret) + omap3isp_preview_cleanup(isp); + + return ret; +} diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h new file mode 100644 index 000000000000..f2d63ca4bd6f --- /dev/null +++ b/drivers/media/video/omap3isp/isppreview.h @@ -0,0 +1,214 @@ +/* + * isppreview.h + * + * TI OMAP3 ISP - Preview module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_PREVIEW_H +#define OMAP3_ISP_PREVIEW_H + +#include <linux/omap3isp.h> +#include <linux/types.h> +#include <media/v4l2-ctrls.h> + +#include "ispvideo.h" + +#define ISPPRV_BRIGHT_STEP 0x1 +#define ISPPRV_BRIGHT_DEF 0x0 +#define ISPPRV_BRIGHT_LOW 0x0 +#define ISPPRV_BRIGHT_HIGH 0xFF +#define ISPPRV_BRIGHT_UNITS 0x1 + +#define ISPPRV_CONTRAST_STEP 0x1 +#define ISPPRV_CONTRAST_DEF 0x10 +#define ISPPRV_CONTRAST_LOW 0x0 +#define ISPPRV_CONTRAST_HIGH 0xFF +#define ISPPRV_CONTRAST_UNITS 0x1 + +#define NO_AVE 0x0 +#define AVE_2_PIX 0x1 +#define AVE_4_PIX 0x2 +#define AVE_8_PIX 0x3 + +/* Features list */ +#define PREV_LUMA_ENHANCE OMAP3ISP_PREV_LUMAENH +#define PREV_INVERSE_ALAW OMAP3ISP_PREV_INVALAW +#define PREV_HORZ_MEDIAN_FILTER OMAP3ISP_PREV_HRZ_MED +#define PREV_CFA OMAP3ISP_PREV_CFA +#define PREV_CHROMA_SUPPRESS OMAP3ISP_PREV_CHROMA_SUPP +#define PREV_WB OMAP3ISP_PREV_WB +#define PREV_BLKADJ OMAP3ISP_PREV_BLKADJ +#define PREV_RGB2RGB OMAP3ISP_PREV_RGB2RGB +#define PREV_COLOR_CONV OMAP3ISP_PREV_COLOR_CONV +#define PREV_YCLIMITS OMAP3ISP_PREV_YC_LIMIT +#define PREV_DEFECT_COR OMAP3ISP_PREV_DEFECT_COR +#define PREV_GAMMA_BYPASS OMAP3ISP_PREV_GAMMABYPASS +#define PREV_DARK_FRAME_CAPTURE OMAP3ISP_PREV_DRK_FRM_CAPTURE +#define PREV_DARK_FRAME_SUBTRACT OMAP3ISP_PREV_DRK_FRM_SUBTRACT +#define PREV_LENS_SHADING OMAP3ISP_PREV_LENS_SHADING +#define PREV_NOISE_FILTER OMAP3ISP_PREV_NF +#define PREV_GAMMA OMAP3ISP_PREV_GAMMA + +#define PREV_CONTRAST (1 << 17) +#define PREV_BRIGHTNESS (1 << 18) +#define PREV_AVERAGER (1 << 19) +#define PREV_FEATURES_END (1 << 20) + +enum preview_input_entity { + PREVIEW_INPUT_NONE, + PREVIEW_INPUT_CCDC, + PREVIEW_INPUT_MEMORY, +}; + +#define PREVIEW_OUTPUT_RESIZER (1 << 1) +#define PREVIEW_OUTPUT_MEMORY (1 << 2) + +/* Configure byte layout of YUV image */ +enum preview_ycpos_mode { + YCPOS_YCrYCb = 0, + YCPOS_YCbYCr = 1, + YCPOS_CbYCrY = 2, + YCPOS_CrYCbY = 3 +}; + +/* + * struct prev_params - Structure for all configuration + * @features: Set of features enabled. + * @cfa: CFA coefficients. + * @csup: Chroma suppression coefficients. + * @luma: Luma enhancement coefficients. + * @nf: Noise filter coefficients. + * @dcor: Noise filter coefficients. + * @gamma: Gamma coefficients. + * @wbal: White Balance parameters. + * @blk_adj: Black adjustment parameters. + * @rgb2rgb: RGB blending parameters. + * @rgb2ycbcr: RGB to ycbcr parameters. + * @hmed: Horizontal median filter. + * @yclimit: YC limits parameters. + * @average: Downsampling rate for averager. + * @contrast: Contrast. + * @brightness: Brightness. + */ +struct prev_params { + u32 features; + struct omap3isp_prev_cfa cfa; + struct omap3isp_prev_csup csup; + struct omap3isp_prev_luma luma; + struct omap3isp_prev_nf nf; + struct omap3isp_prev_dcor dcor; + struct omap3isp_prev_gtables gamma; + struct omap3isp_prev_wbal wbal; + struct omap3isp_prev_blkadj blk_adj; + struct omap3isp_prev_rgbtorgb rgb2rgb; + struct omap3isp_prev_csc rgb2ycbcr; + struct omap3isp_prev_hmed hmed; + struct omap3isp_prev_yclimit yclimit; + u8 average; + u8 contrast; + u8 brightness; +}; + +/* + * struct isptables_update - Structure for Table Configuration. + * @update: Specifies which tables should be updated. + * @flag: Specifies which tables should be enabled. + * @nf: Pointer to structure for Noise Filter + * @lsc: Pointer to LSC gain table. (currently not used) + * @gamma: Pointer to gamma correction tables. + * @cfa: Pointer to color filter array configuration. + * @wbal: Pointer to colour and digital gain configuration. + */ +struct isptables_update { + u32 update; + u32 flag; + struct omap3isp_prev_nf *nf; + u32 *lsc; + struct omap3isp_prev_gtables *gamma; + struct omap3isp_prev_cfa *cfa; + struct omap3isp_prev_wbal *wbal; +}; + +/* Sink and source previewer pads */ +#define PREV_PAD_SINK 0 +#define PREV_PAD_SOURCE 1 +#define PREV_PADS_NUM 2 + +/* + * struct isp_prev_device - Structure for storing ISP Preview module information + * @subdev: V4L2 subdevice + * @pads: Media entity pads + * @formats: Active formats at the subdev pad + * @input: Module currently connected to the input pad + * @output: Bitmask of the active output + * @video_in: Input video entity + * @video_out: Output video entity + * @error: A hardware error occured during capture + * @params: Module configuration data + * @shadow_update: If set, update the hardware configured in the next interrupt + * @underrun: Whether the preview entity has queued buffers on the output + * @state: Current preview pipeline state + * @lock: Shadow update lock + * @update: Bitmask of the parameters to be updated + * + * This structure is used to store the OMAP ISP Preview module Information. + */ +struct isp_prev_device { + struct v4l2_subdev subdev; + struct media_pad pads[PREV_PADS_NUM]; + struct v4l2_mbus_framefmt formats[PREV_PADS_NUM]; + + struct v4l2_ctrl_handler ctrls; + + enum preview_input_entity input; + unsigned int output; + struct isp_video video_in; + struct isp_video video_out; + unsigned int error; + + struct prev_params params; + unsigned int shadow_update:1; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; + spinlock_t lock; + u32 update; +}; + +struct isp_device; + +int omap3isp_preview_init(struct isp_device *isp); +void omap3isp_preview_cleanup(struct isp_device *isp); + +int omap3isp_preview_register_entities(struct isp_prev_device *prv, + struct v4l2_device *vdev); +void omap3isp_preview_unregister_entities(struct isp_prev_device *prv); + +void omap3isp_preview_isr_frame_sync(struct isp_prev_device *prev); +void omap3isp_preview_isr(struct isp_prev_device *prev); + +int omap3isp_preview_busy(struct isp_prev_device *isp_prev); + +void omap3isp_preview_restore_context(struct isp_device *isp); + +#endif /* OMAP3_ISP_PREVIEW_H */ diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/video/omap3isp/ispqueue.c new file mode 100644 index 000000000000..8fddc5806b0d --- /dev/null +++ b/drivers/media/video/omap3isp/ispqueue.c @@ -0,0 +1,1153 @@ +/* + * ispqueue.c + * + * TI OMAP3 ISP - Video buffers queue handling + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <asm/cacheflush.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/pagemap.h> +#include <linux/poll.h> +#include <linux/scatterlist.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include "ispqueue.h" + +/* ----------------------------------------------------------------------------- + * Video buffers management + */ + +/* + * isp_video_buffer_cache_sync - Keep the buffers coherent between CPU and ISP + * + * The typical operation required here is Cache Invalidation across + * the (user space) buffer address range. And this _must_ be done + * at QBUF stage (and *only* at QBUF). + * + * We try to use optimal cache invalidation function: + * - dmac_map_area: + * - used when the number of pages are _low_. + * - it becomes quite slow as the number of pages increase. + * - for 648x492 viewfinder (150 pages) it takes 1.3 ms. + * - for 5 Mpix buffer (2491 pages) it takes between 25-50 ms. + * + * - flush_cache_all: + * - used when the number of pages are _high_. + * - time taken in the range of 500-900 us. + * - has a higher penalty but, as whole dcache + icache is invalidated + */ +/* + * FIXME: dmac_inv_range crashes randomly on the user space buffer + * address. Fall back to flush_cache_all for now. + */ +#define ISP_CACHE_FLUSH_PAGES_MAX 0 + +static void isp_video_buffer_cache_sync(struct isp_video_buffer *buf) +{ + if (buf->skip_cache) + return; + + if (buf->vbuf.m.userptr == 0 || buf->npages == 0 || + buf->npages > ISP_CACHE_FLUSH_PAGES_MAX) + flush_cache_all(); + else { + dmac_map_area((void *)buf->vbuf.m.userptr, buf->vbuf.length, + DMA_FROM_DEVICE); + outer_inv_range(buf->vbuf.m.userptr, + buf->vbuf.m.userptr + buf->vbuf.length); + } +} + +/* + * isp_video_buffer_lock_vma - Prevent VMAs from being unmapped + * + * Lock the VMAs underlying the given buffer into memory. This avoids the + * userspace buffer mapping from being swapped out, making VIPT cache handling + * easier. + * + * Note that the pages will not be freed as the buffers have been locked to + * memory using by a call to get_user_pages(), but the userspace mapping could + * still disappear if the VMAs are not locked. This is caused by the memory + * management code trying to be as lock-less as possible, which results in the + * userspace mapping manager not finding out that the pages are locked under + * some conditions. + */ +static int isp_video_buffer_lock_vma(struct isp_video_buffer *buf, int lock) +{ + struct vm_area_struct *vma; + unsigned long start; + unsigned long end; + int ret = 0; + + if (buf->vbuf.memory == V4L2_MEMORY_MMAP) + return 0; + + /* We can be called from workqueue context if the current task dies to + * unlock the VMAs. In that case there's no current memory management + * context so unlocking can't be performed, but the VMAs have been or + * are getting destroyed anyway so it doesn't really matter. + */ + if (!current || !current->mm) + return lock ? -EINVAL : 0; + + start = buf->vbuf.m.userptr; + end = buf->vbuf.m.userptr + buf->vbuf.length - 1; + + down_write(¤t->mm->mmap_sem); + spin_lock(¤t->mm->page_table_lock); + + do { + vma = find_vma(current->mm, start); + if (vma == NULL) { + ret = -EFAULT; + goto out; + } + + if (lock) + vma->vm_flags |= VM_LOCKED; + else + vma->vm_flags &= ~VM_LOCKED; + + start = vma->vm_end + 1; + } while (vma->vm_end < end); + + if (lock) + buf->vm_flags |= VM_LOCKED; + else + buf->vm_flags &= ~VM_LOCKED; + +out: + spin_unlock(¤t->mm->page_table_lock); + up_write(¤t->mm->mmap_sem); + return ret; +} + +/* + * isp_video_buffer_sglist_kernel - Build a scatter list for a vmalloc'ed buffer + * + * Iterate over the vmalloc'ed area and create a scatter list entry for every + * page. + */ +static int isp_video_buffer_sglist_kernel(struct isp_video_buffer *buf) +{ + struct scatterlist *sglist; + unsigned int npages; + unsigned int i; + void *addr; + + addr = buf->vaddr; + npages = PAGE_ALIGN(buf->vbuf.length) >> PAGE_SHIFT; + + sglist = vmalloc(npages * sizeof(*sglist)); + if (sglist == NULL) + return -ENOMEM; + + sg_init_table(sglist, npages); + + for (i = 0; i < npages; ++i, addr += PAGE_SIZE) { + struct page *page = vmalloc_to_page(addr); + + if (page == NULL || PageHighMem(page)) { + vfree(sglist); + return -EINVAL; + } + + sg_set_page(&sglist[i], page, PAGE_SIZE, 0); + } + + buf->sglen = npages; + buf->sglist = sglist; + + return 0; +} + +/* + * isp_video_buffer_sglist_user - Build a scatter list for a userspace buffer + * + * Walk the buffer pages list and create a 1:1 mapping to a scatter list. + */ +static int isp_video_buffer_sglist_user(struct isp_video_buffer *buf) +{ + struct scatterlist *sglist; + unsigned int offset = buf->offset; + unsigned int i; + + sglist = vmalloc(buf->npages * sizeof(*sglist)); + if (sglist == NULL) + return -ENOMEM; + + sg_init_table(sglist, buf->npages); + + for (i = 0; i < buf->npages; ++i) { + if (PageHighMem(buf->pages[i])) { + vfree(sglist); + return -EINVAL; + } + + sg_set_page(&sglist[i], buf->pages[i], PAGE_SIZE - offset, + offset); + offset = 0; + } + + buf->sglen = buf->npages; + buf->sglist = sglist; + + return 0; +} + +/* + * isp_video_buffer_sglist_pfnmap - Build a scatter list for a VM_PFNMAP buffer + * + * Create a scatter list of physically contiguous pages starting at the buffer + * memory physical address. + */ +static int isp_video_buffer_sglist_pfnmap(struct isp_video_buffer *buf) +{ + struct scatterlist *sglist; + unsigned int offset = buf->offset; + unsigned long pfn = buf->paddr >> PAGE_SHIFT; + unsigned int i; + + sglist = vmalloc(buf->npages * sizeof(*sglist)); + if (sglist == NULL) + return -ENOMEM; + + sg_init_table(sglist, buf->npages); + + for (i = 0; i < buf->npages; ++i, ++pfn) { + sg_set_page(&sglist[i], pfn_to_page(pfn), PAGE_SIZE - offset, + offset); + /* PFNMAP buffers will not get DMA-mapped, set the DMA address + * manually. + */ + sg_dma_address(&sglist[i]) = (pfn << PAGE_SHIFT) + offset; + offset = 0; + } + + buf->sglen = buf->npages; + buf->sglist = sglist; + + return 0; +} + +/* + * isp_video_buffer_cleanup - Release pages for a userspace VMA. + * + * Release pages locked by a call isp_video_buffer_prepare_user and free the + * pages table. + */ +static void isp_video_buffer_cleanup(struct isp_video_buffer *buf) +{ + enum dma_data_direction direction; + unsigned int i; + + if (buf->queue->ops->buffer_cleanup) + buf->queue->ops->buffer_cleanup(buf); + + if (!(buf->vm_flags & VM_PFNMAP)) { + direction = buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE + ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + dma_unmap_sg(buf->queue->dev, buf->sglist, buf->sglen, + direction); + } + + vfree(buf->sglist); + buf->sglist = NULL; + buf->sglen = 0; + + if (buf->pages != NULL) { + isp_video_buffer_lock_vma(buf, 0); + + for (i = 0; i < buf->npages; ++i) + page_cache_release(buf->pages[i]); + + vfree(buf->pages); + buf->pages = NULL; + } + + buf->npages = 0; + buf->skip_cache = false; +} + +/* + * isp_video_buffer_prepare_user - Pin userspace VMA pages to memory. + * + * This function creates a list of pages for a userspace VMA. The number of + * pages is first computed based on the buffer size, and pages are then + * retrieved by a call to get_user_pages. + * + * Pages are pinned to memory by get_user_pages, making them available for DMA + * transfers. However, due to memory management optimization, it seems the + * get_user_pages doesn't guarantee that the pinned pages will not be written + * to swap and removed from the userspace mapping(s). When this happens, a page + * fault can be generated when accessing those unmapped pages. + * + * If the fault is triggered by a page table walk caused by VIPT cache + * management operations, the page fault handler might oops if the MM semaphore + * is held, as it can't handle kernel page faults in that case. To fix that, a + * fixup entry needs to be added to the cache management code, or the userspace + * VMA must be locked to avoid removing pages from the userspace mapping in the + * first place. + * + * If the number of pages retrieved is smaller than the number required by the + * buffer size, the function returns -EFAULT. + */ +static int isp_video_buffer_prepare_user(struct isp_video_buffer *buf) +{ + unsigned long data; + unsigned int first; + unsigned int last; + int ret; + + data = buf->vbuf.m.userptr; + first = (data & PAGE_MASK) >> PAGE_SHIFT; + last = ((data + buf->vbuf.length - 1) & PAGE_MASK) >> PAGE_SHIFT; + + buf->offset = data & ~PAGE_MASK; + buf->npages = last - first + 1; + buf->pages = vmalloc(buf->npages * sizeof(buf->pages[0])); + if (buf->pages == NULL) + return -ENOMEM; + + down_read(¤t->mm->mmap_sem); + ret = get_user_pages(current, current->mm, data & PAGE_MASK, + buf->npages, + buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE, 0, + buf->pages, NULL); + up_read(¤t->mm->mmap_sem); + + if (ret != buf->npages) { + buf->npages = ret; + isp_video_buffer_cleanup(buf); + return -EFAULT; + } + + ret = isp_video_buffer_lock_vma(buf, 1); + if (ret < 0) + isp_video_buffer_cleanup(buf); + + return ret; +} + +/* + * isp_video_buffer_prepare_pfnmap - Validate a VM_PFNMAP userspace buffer + * + * Userspace VM_PFNMAP buffers are supported only if they are contiguous in + * memory and if they span a single VMA. + * + * Return 0 if the buffer is valid, or -EFAULT otherwise. + */ +static int isp_video_buffer_prepare_pfnmap(struct isp_video_buffer *buf) +{ + struct vm_area_struct *vma; + unsigned long prev_pfn; + unsigned long this_pfn; + unsigned long start; + unsigned long end; + dma_addr_t pa; + int ret = -EFAULT; + + start = buf->vbuf.m.userptr; + end = buf->vbuf.m.userptr + buf->vbuf.length - 1; + + buf->offset = start & ~PAGE_MASK; + buf->npages = (end >> PAGE_SHIFT) - (start >> PAGE_SHIFT) + 1; + buf->pages = NULL; + + down_read(¤t->mm->mmap_sem); + vma = find_vma(current->mm, start); + if (vma == NULL || vma->vm_end < end) + goto done; + + for (prev_pfn = 0; start <= end; start += PAGE_SIZE) { + ret = follow_pfn(vma, start, &this_pfn); + if (ret) + goto done; + + if (prev_pfn == 0) + pa = this_pfn << PAGE_SHIFT; + else if (this_pfn != prev_pfn + 1) { + ret = -EFAULT; + goto done; + } + + prev_pfn = this_pfn; + } + + buf->paddr = pa + buf->offset; + ret = 0; + +done: + up_read(¤t->mm->mmap_sem); + return ret; +} + +/* + * isp_video_buffer_prepare_vm_flags - Get VMA flags for a userspace address + * + * This function locates the VMAs for the buffer's userspace address and checks + * that their flags match. The onlflag that we need to care for at the moment is + * VM_PFNMAP. + * + * The buffer vm_flags field is set to the first VMA flags. + * + * Return -EFAULT if no VMA can be found for part of the buffer, or if the VMAs + * have incompatible flags. + */ +static int isp_video_buffer_prepare_vm_flags(struct isp_video_buffer *buf) +{ + struct vm_area_struct *vma; + pgprot_t vm_page_prot; + unsigned long start; + unsigned long end; + int ret = -EFAULT; + + start = buf->vbuf.m.userptr; + end = buf->vbuf.m.userptr + buf->vbuf.length - 1; + + down_read(¤t->mm->mmap_sem); + + do { + vma = find_vma(current->mm, start); + if (vma == NULL) + goto done; + + if (start == buf->vbuf.m.userptr) { + buf->vm_flags = vma->vm_flags; + vm_page_prot = vma->vm_page_prot; + } + + if ((buf->vm_flags ^ vma->vm_flags) & VM_PFNMAP) + goto done; + + if (vm_page_prot != vma->vm_page_prot) + goto done; + + start = vma->vm_end + 1; + } while (vma->vm_end < end); + + /* Skip cache management to enhance performances for non-cached or + * write-combining buffers. + */ + if (vm_page_prot == pgprot_noncached(vm_page_prot) || + vm_page_prot == pgprot_writecombine(vm_page_prot)) + buf->skip_cache = true; + + ret = 0; + +done: + up_read(¤t->mm->mmap_sem); + return ret; +} + +/* + * isp_video_buffer_prepare - Make a buffer ready for operation + * + * Preparing a buffer involves: + * + * - validating VMAs (userspace buffers only) + * - locking pages and VMAs into memory (userspace buffers only) + * - building page and scatter-gather lists + * - mapping buffers for DMA operation + * - performing driver-specific preparation + * + * The function must be called in userspace context with a valid mm context + * (this excludes cleanup paths such as sys_close when the userspace process + * segfaults). + */ +static int isp_video_buffer_prepare(struct isp_video_buffer *buf) +{ + enum dma_data_direction direction; + int ret; + + switch (buf->vbuf.memory) { + case V4L2_MEMORY_MMAP: + ret = isp_video_buffer_sglist_kernel(buf); + break; + + case V4L2_MEMORY_USERPTR: + ret = isp_video_buffer_prepare_vm_flags(buf); + if (ret < 0) + return ret; + + if (buf->vm_flags & VM_PFNMAP) { + ret = isp_video_buffer_prepare_pfnmap(buf); + if (ret < 0) + return ret; + + ret = isp_video_buffer_sglist_pfnmap(buf); + } else { + ret = isp_video_buffer_prepare_user(buf); + if (ret < 0) + return ret; + + ret = isp_video_buffer_sglist_user(buf); + } + break; + + default: + return -EINVAL; + } + + if (ret < 0) + goto done; + + if (!(buf->vm_flags & VM_PFNMAP)) { + direction = buf->vbuf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE + ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + ret = dma_map_sg(buf->queue->dev, buf->sglist, buf->sglen, + direction); + if (ret != buf->sglen) { + ret = -EFAULT; + goto done; + } + } + + if (buf->queue->ops->buffer_prepare) + ret = buf->queue->ops->buffer_prepare(buf); + +done: + if (ret < 0) { + isp_video_buffer_cleanup(buf); + return ret; + } + + return ret; +} + +/* + * isp_video_queue_query - Query the status of a given buffer + * + * Locking: must be called with the queue lock held. + */ +static void isp_video_buffer_query(struct isp_video_buffer *buf, + struct v4l2_buffer *vbuf) +{ + memcpy(vbuf, &buf->vbuf, sizeof(*vbuf)); + + if (buf->vma_use_count) + vbuf->flags |= V4L2_BUF_FLAG_MAPPED; + + switch (buf->state) { + case ISP_BUF_STATE_ERROR: + vbuf->flags |= V4L2_BUF_FLAG_ERROR; + case ISP_BUF_STATE_DONE: + vbuf->flags |= V4L2_BUF_FLAG_DONE; + case ISP_BUF_STATE_QUEUED: + case ISP_BUF_STATE_ACTIVE: + vbuf->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case ISP_BUF_STATE_IDLE: + default: + break; + } +} + +/* + * isp_video_buffer_wait - Wait for a buffer to be ready + * + * In non-blocking mode, return immediately with 0 if the buffer is ready or + * -EAGAIN if the buffer is in the QUEUED or ACTIVE state. + * + * In blocking mode, wait (interruptibly but with no timeout) on the buffer wait + * queue using the same condition. + */ +static int isp_video_buffer_wait(struct isp_video_buffer *buf, int nonblocking) +{ + if (nonblocking) { + return (buf->state != ISP_BUF_STATE_QUEUED && + buf->state != ISP_BUF_STATE_ACTIVE) + ? 0 : -EAGAIN; + } + + return wait_event_interruptible(buf->wait, + buf->state != ISP_BUF_STATE_QUEUED && + buf->state != ISP_BUF_STATE_ACTIVE); +} + +/* ----------------------------------------------------------------------------- + * Queue management + */ + +/* + * isp_video_queue_free - Free video buffers memory + * + * Buffers can only be freed if the queue isn't streaming and if no buffer is + * mapped to userspace. Return -EBUSY if those conditions aren't statisfied. + * + * This function must be called with the queue lock held. + */ +static int isp_video_queue_free(struct isp_video_queue *queue) +{ + unsigned int i; + + if (queue->streaming) + return -EBUSY; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffers[i]->vma_use_count != 0) + return -EBUSY; + } + + for (i = 0; i < queue->count; ++i) { + struct isp_video_buffer *buf = queue->buffers[i]; + + isp_video_buffer_cleanup(buf); + + vfree(buf->vaddr); + buf->vaddr = NULL; + + kfree(buf); + queue->buffers[i] = NULL; + } + + INIT_LIST_HEAD(&queue->queue); + queue->count = 0; + return 0; +} + +/* + * isp_video_queue_alloc - Allocate video buffers memory + * + * This function must be called with the queue lock held. + */ +static int isp_video_queue_alloc(struct isp_video_queue *queue, + unsigned int nbuffers, + unsigned int size, enum v4l2_memory memory) +{ + struct isp_video_buffer *buf; + unsigned int i; + void *mem; + int ret; + + /* Start by freeing the buffers. */ + ret = isp_video_queue_free(queue); + if (ret < 0) + return ret; + + /* Bail out of no buffers should be allocated. */ + if (nbuffers == 0) + return 0; + + /* Initialize the allocated buffers. */ + for (i = 0; i < nbuffers; ++i) { + buf = kzalloc(queue->bufsize, GFP_KERNEL); + if (buf == NULL) + break; + + if (memory == V4L2_MEMORY_MMAP) { + /* Allocate video buffers memory for mmap mode. Align + * the size to the page size. + */ + mem = vmalloc_32_user(PAGE_ALIGN(size)); + if (mem == NULL) { + kfree(buf); + break; + } + + buf->vbuf.m.offset = i * PAGE_ALIGN(size); + buf->vaddr = mem; + } + + buf->vbuf.index = i; + buf->vbuf.length = size; + buf->vbuf.type = queue->type; + buf->vbuf.field = V4L2_FIELD_NONE; + buf->vbuf.memory = memory; + + buf->queue = queue; + init_waitqueue_head(&buf->wait); + + queue->buffers[i] = buf; + } + + if (i == 0) + return -ENOMEM; + + queue->count = i; + return nbuffers; +} + +/** + * omap3isp_video_queue_cleanup - Clean up the video buffers queue + * @queue: Video buffers queue + * + * Free all allocated resources and clean up the video buffers queue. The queue + * must not be busy (no ongoing video stream) and buffers must have been + * unmapped. + * + * Return 0 on success or -EBUSY if the queue is busy or buffers haven't been + * unmapped. + */ +int omap3isp_video_queue_cleanup(struct isp_video_queue *queue) +{ + return isp_video_queue_free(queue); +} + +/** + * omap3isp_video_queue_init - Initialize the video buffers queue + * @queue: Video buffers queue + * @type: V4L2 buffer type (capture or output) + * @ops: Driver-specific queue operations + * @dev: Device used for DMA operations + * @bufsize: Size of the driver-specific buffer structure + * + * Initialize the video buffers queue with the supplied parameters. + * + * The queue type must be one of V4L2_BUF_TYPE_VIDEO_CAPTURE or + * V4L2_BUF_TYPE_VIDEO_OUTPUT. Other buffer types are not supported yet. + * + * Buffer objects will be allocated using the given buffer size to allow room + * for driver-specific fields. Driver-specific buffer structures must start + * with a struct isp_video_buffer field. Drivers with no driver-specific buffer + * structure must pass the size of the isp_video_buffer structure in the bufsize + * parameter. + * + * Return 0 on success. + */ +int omap3isp_video_queue_init(struct isp_video_queue *queue, + enum v4l2_buf_type type, + const struct isp_video_queue_operations *ops, + struct device *dev, unsigned int bufsize) +{ + INIT_LIST_HEAD(&queue->queue); + mutex_init(&queue->lock); + spin_lock_init(&queue->irqlock); + + queue->type = type; + queue->ops = ops; + queue->dev = dev; + queue->bufsize = bufsize; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 operations + */ + +/** + * omap3isp_video_queue_reqbufs - Allocate video buffers memory + * + * This function is intended to be used as a VIDIOC_REQBUFS ioctl handler. It + * allocated video buffer objects and, for MMAP buffers, buffer memory. + * + * If the number of buffers is 0, all buffers are freed and the function returns + * without performing any allocation. + * + * If the number of buffers is not 0, currently allocated buffers (if any) are + * freed and the requested number of buffers are allocated. Depending on + * driver-specific requirements and on memory availability, a number of buffer + * smaller or bigger than requested can be allocated. This isn't considered as + * an error. + * + * Return 0 on success or one of the following error codes: + * + * -EINVAL if the buffer type or index are invalid + * -EBUSY if the queue is busy (streaming or buffers mapped) + * -ENOMEM if the buffers can't be allocated due to an out-of-memory condition + */ +int omap3isp_video_queue_reqbufs(struct isp_video_queue *queue, + struct v4l2_requestbuffers *rb) +{ + unsigned int nbuffers = rb->count; + unsigned int size; + int ret; + + if (rb->type != queue->type) + return -EINVAL; + + queue->ops->queue_prepare(queue, &nbuffers, &size); + if (size == 0) + return -EINVAL; + + nbuffers = min_t(unsigned int, nbuffers, ISP_VIDEO_MAX_BUFFERS); + + mutex_lock(&queue->lock); + + ret = isp_video_queue_alloc(queue, nbuffers, size, rb->memory); + if (ret < 0) + goto done; + + rb->count = ret; + ret = 0; + +done: + mutex_unlock(&queue->lock); + return ret; +} + +/** + * omap3isp_video_queue_querybuf - Query the status of a buffer in a queue + * + * This function is intended to be used as a VIDIOC_QUERYBUF ioctl handler. It + * returns the status of a given video buffer. + * + * Return 0 on success or -EINVAL if the buffer type or index are invalid. + */ +int omap3isp_video_queue_querybuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf) +{ + struct isp_video_buffer *buf; + int ret = 0; + + if (vbuf->type != queue->type) + return -EINVAL; + + mutex_lock(&queue->lock); + + if (vbuf->index >= queue->count) { + ret = -EINVAL; + goto done; + } + + buf = queue->buffers[vbuf->index]; + isp_video_buffer_query(buf, vbuf); + +done: + mutex_unlock(&queue->lock); + return ret; +} + +/** + * omap3isp_video_queue_qbuf - Queue a buffer + * + * This function is intended to be used as a VIDIOC_QBUF ioctl handler. + * + * The v4l2_buffer structure passed from userspace is first sanity tested. If + * sane, the buffer is then processed and added to the main queue and, if the + * queue is streaming, to the IRQ queue. + * + * Before being enqueued, USERPTR buffers are checked for address changes. If + * the buffer has a different userspace address, the old memory area is unlocked + * and the new memory area is locked. + */ +int omap3isp_video_queue_qbuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf) +{ + struct isp_video_buffer *buf; + unsigned long flags; + int ret = -EINVAL; + + if (vbuf->type != queue->type) + goto done; + + mutex_lock(&queue->lock); + + if (vbuf->index >= queue->count) + goto done; + + buf = queue->buffers[vbuf->index]; + + if (vbuf->memory != buf->vbuf.memory) + goto done; + + if (buf->state != ISP_BUF_STATE_IDLE) + goto done; + + if (vbuf->memory == V4L2_MEMORY_USERPTR && + vbuf->m.userptr != buf->vbuf.m.userptr) { + isp_video_buffer_cleanup(buf); + buf->vbuf.m.userptr = vbuf->m.userptr; + buf->prepared = 0; + } + + if (!buf->prepared) { + ret = isp_video_buffer_prepare(buf); + if (ret < 0) + goto done; + buf->prepared = 1; + } + + isp_video_buffer_cache_sync(buf); + + buf->state = ISP_BUF_STATE_QUEUED; + list_add_tail(&buf->stream, &queue->queue); + + if (queue->streaming) { + spin_lock_irqsave(&queue->irqlock, flags); + queue->ops->buffer_queue(buf); + spin_unlock_irqrestore(&queue->irqlock, flags); + } + + ret = 0; + +done: + mutex_unlock(&queue->lock); + return ret; +} + +/** + * omap3isp_video_queue_dqbuf - Dequeue a buffer + * + * This function is intended to be used as a VIDIOC_DQBUF ioctl handler. + * + * The v4l2_buffer structure passed from userspace is first sanity tested. If + * sane, the buffer is then processed and added to the main queue and, if the + * queue is streaming, to the IRQ queue. + * + * Before being enqueued, USERPTR buffers are checked for address changes. If + * the buffer has a different userspace address, the old memory area is unlocked + * and the new memory area is locked. + */ +int omap3isp_video_queue_dqbuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf, int nonblocking) +{ + struct isp_video_buffer *buf; + int ret; + + if (vbuf->type != queue->type) + return -EINVAL; + + mutex_lock(&queue->lock); + + if (list_empty(&queue->queue)) { + ret = -EINVAL; + goto done; + } + + buf = list_first_entry(&queue->queue, struct isp_video_buffer, stream); + ret = isp_video_buffer_wait(buf, nonblocking); + if (ret < 0) + goto done; + + list_del(&buf->stream); + + isp_video_buffer_query(buf, vbuf); + buf->state = ISP_BUF_STATE_IDLE; + vbuf->flags &= ~V4L2_BUF_FLAG_QUEUED; + +done: + mutex_unlock(&queue->lock); + return ret; +} + +/** + * omap3isp_video_queue_streamon - Start streaming + * + * This function is intended to be used as a VIDIOC_STREAMON ioctl handler. It + * starts streaming on the queue and calls the buffer_queue operation for all + * queued buffers. + * + * Return 0 on success. + */ +int omap3isp_video_queue_streamon(struct isp_video_queue *queue) +{ + struct isp_video_buffer *buf; + unsigned long flags; + + mutex_lock(&queue->lock); + + if (queue->streaming) + goto done; + + queue->streaming = 1; + + spin_lock_irqsave(&queue->irqlock, flags); + list_for_each_entry(buf, &queue->queue, stream) + queue->ops->buffer_queue(buf); + spin_unlock_irqrestore(&queue->irqlock, flags); + +done: + mutex_unlock(&queue->lock); + return 0; +} + +/** + * omap3isp_video_queue_streamoff - Stop streaming + * + * This function is intended to be used as a VIDIOC_STREAMOFF ioctl handler. It + * stops streaming on the queue and wakes up all the buffers. + * + * Drivers must stop the hardware and synchronize with interrupt handlers and/or + * delayed works before calling this function to make sure no buffer will be + * touched by the driver and/or hardware. + */ +void omap3isp_video_queue_streamoff(struct isp_video_queue *queue) +{ + struct isp_video_buffer *buf; + unsigned long flags; + unsigned int i; + + mutex_lock(&queue->lock); + + if (!queue->streaming) + goto done; + + queue->streaming = 0; + + spin_lock_irqsave(&queue->irqlock, flags); + for (i = 0; i < queue->count; ++i) { + buf = queue->buffers[i]; + + if (buf->state == ISP_BUF_STATE_ACTIVE) + wake_up(&buf->wait); + + buf->state = ISP_BUF_STATE_IDLE; + } + spin_unlock_irqrestore(&queue->irqlock, flags); + + INIT_LIST_HEAD(&queue->queue); + +done: + mutex_unlock(&queue->lock); +} + +/** + * omap3isp_video_queue_discard_done - Discard all buffers marked as DONE + * + * This function is intended to be used with suspend/resume operations. It + * discards all 'done' buffers as they would be too old to be requested after + * resume. + * + * Drivers must stop the hardware and synchronize with interrupt handlers and/or + * delayed works before calling this function to make sure no buffer will be + * touched by the driver and/or hardware. + */ +void omap3isp_video_queue_discard_done(struct isp_video_queue *queue) +{ + struct isp_video_buffer *buf; + unsigned int i; + + mutex_lock(&queue->lock); + + if (!queue->streaming) + goto done; + + for (i = 0; i < queue->count; ++i) { + buf = queue->buffers[i]; + + if (buf->state == ISP_BUF_STATE_DONE) + buf->state = ISP_BUF_STATE_ERROR; + } + +done: + mutex_unlock(&queue->lock); +} + +static void isp_video_queue_vm_open(struct vm_area_struct *vma) +{ + struct isp_video_buffer *buf = vma->vm_private_data; + + buf->vma_use_count++; +} + +static void isp_video_queue_vm_close(struct vm_area_struct *vma) +{ + struct isp_video_buffer *buf = vma->vm_private_data; + + buf->vma_use_count--; +} + +static const struct vm_operations_struct isp_video_queue_vm_ops = { + .open = isp_video_queue_vm_open, + .close = isp_video_queue_vm_close, +}; + +/** + * omap3isp_video_queue_mmap - Map buffers to userspace + * + * This function is intended to be used as an mmap() file operation handler. It + * maps a buffer to userspace based on the VMA offset. + * + * Only buffers of memory type MMAP are supported. + */ +int omap3isp_video_queue_mmap(struct isp_video_queue *queue, + struct vm_area_struct *vma) +{ + struct isp_video_buffer *uninitialized_var(buf); + unsigned long size; + unsigned int i; + int ret = 0; + + mutex_lock(&queue->lock); + + for (i = 0; i < queue->count; ++i) { + buf = queue->buffers[i]; + if ((buf->vbuf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + + if (i == queue->count) { + ret = -EINVAL; + goto done; + } + + size = vma->vm_end - vma->vm_start; + + if (buf->vbuf.memory != V4L2_MEMORY_MMAP || + size != PAGE_ALIGN(buf->vbuf.length)) { + ret = -EINVAL; + goto done; + } + + ret = remap_vmalloc_range(vma, buf->vaddr, 0); + if (ret < 0) + goto done; + + vma->vm_ops = &isp_video_queue_vm_ops; + vma->vm_private_data = buf; + isp_video_queue_vm_open(vma); + +done: + mutex_unlock(&queue->lock); + return ret; +} + +/** + * omap3isp_video_queue_poll - Poll video queue state + * + * This function is intended to be used as a poll() file operation handler. It + * polls the state of the video buffer at the front of the queue and returns an + * events mask. + * + * If no buffer is present at the front of the queue, POLLERR is returned. + */ +unsigned int omap3isp_video_queue_poll(struct isp_video_queue *queue, + struct file *file, poll_table *wait) +{ + struct isp_video_buffer *buf; + unsigned int mask = 0; + + mutex_lock(&queue->lock); + if (list_empty(&queue->queue)) { + mask |= POLLERR; + goto done; + } + buf = list_first_entry(&queue->queue, struct isp_video_buffer, stream); + + poll_wait(file, &buf->wait, wait); + if (buf->state == ISP_BUF_STATE_DONE || + buf->state == ISP_BUF_STATE_ERROR) { + if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + mask |= POLLIN | POLLRDNORM; + else + mask |= POLLOUT | POLLWRNORM; + } + +done: + mutex_unlock(&queue->lock); + return mask; +} diff --git a/drivers/media/video/omap3isp/ispqueue.h b/drivers/media/video/omap3isp/ispqueue.h new file mode 100644 index 000000000000..251de3e1679d --- /dev/null +++ b/drivers/media/video/omap3isp/ispqueue.h @@ -0,0 +1,187 @@ +/* + * ispqueue.h + * + * TI OMAP3 ISP - Video buffers queue handling + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_QUEUE_H +#define OMAP3_ISP_QUEUE_H + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <linux/wait.h> + +struct isp_video_queue; +struct page; +struct scatterlist; + +#define ISP_VIDEO_MAX_BUFFERS 16 + +/** + * enum isp_video_buffer_state - ISP video buffer state + * @ISP_BUF_STATE_IDLE: The buffer is under userspace control (dequeued + * or not queued yet). + * @ISP_BUF_STATE_QUEUED: The buffer has been queued but isn't used by the + * device yet. + * @ISP_BUF_STATE_ACTIVE: The buffer is in use for an active video transfer. + * @ISP_BUF_STATE_ERROR: The device is done with the buffer and an error + * occured. For capture device the buffer likely contains corrupted data or + * no data at all. + * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occured. + * For capture devices the buffer contains valid data. + */ +enum isp_video_buffer_state { + ISP_BUF_STATE_IDLE, + ISP_BUF_STATE_QUEUED, + ISP_BUF_STATE_ACTIVE, + ISP_BUF_STATE_ERROR, + ISP_BUF_STATE_DONE, +}; + +/** + * struct isp_video_buffer - ISP video buffer + * @vma_use_count: Number of times the buffer is mmap'ed to userspace + * @stream: List head for insertion into main queue + * @queue: ISP buffers queue this buffer belongs to + * @prepared: Whether the buffer has been prepared + * @skip_cache: Whether to skip cache management operations for this buffer + * @vaddr: Memory virtual address (for kernel buffers) + * @vm_flags: Buffer VMA flags (for userspace buffers) + * @offset: Offset inside the first page (for userspace buffers) + * @npages: Number of pages (for userspace buffers) + * @pages: Pages table (for userspace non-VM_PFNMAP buffers) + * @paddr: Memory physical address (for userspace VM_PFNMAP buffers) + * @sglen: Number of elements in the scatter list (for non-VM_PFNMAP buffers) + * @sglist: Scatter list (for non-VM_PFNMAP buffers) + * @vbuf: V4L2 buffer + * @irqlist: List head for insertion into IRQ queue + * @state: Current buffer state + * @wait: Wait queue to signal buffer completion + */ +struct isp_video_buffer { + unsigned long vma_use_count; + struct list_head stream; + struct isp_video_queue *queue; + unsigned int prepared:1; + bool skip_cache; + + /* For kernel buffers. */ + void *vaddr; + + /* For userspace buffers. */ + unsigned long vm_flags; + unsigned long offset; + unsigned int npages; + struct page **pages; + dma_addr_t paddr; + + /* For all buffers except VM_PFNMAP. */ + unsigned int sglen; + struct scatterlist *sglist; + + /* Touched by the interrupt handler. */ + struct v4l2_buffer vbuf; + struct list_head irqlist; + enum isp_video_buffer_state state; + wait_queue_head_t wait; +}; + +#define to_isp_video_buffer(vb) container_of(vb, struct isp_video_buffer, vb) + +/** + * struct isp_video_queue_operations - Driver-specific operations + * @queue_prepare: Called before allocating buffers. Drivers should clamp the + * number of buffers according to their requirements, and must return the + * buffer size in bytes. + * @buffer_prepare: Called the first time a buffer is queued, or after changing + * the userspace memory address for a USERPTR buffer, with the queue lock + * held. Drivers should perform device-specific buffer preparation (such as + * mapping the buffer memory in an IOMMU). This operation is optional. + * @buffer_queue: Called when a buffer is being added to the queue with the + * queue irqlock spinlock held. + * @buffer_cleanup: Called before freeing buffers, or before changing the + * userspace memory address for a USERPTR buffer, with the queue lock held. + * Drivers must perform cleanup operations required to undo the + * buffer_prepare call. This operation is optional. + */ +struct isp_video_queue_operations { + void (*queue_prepare)(struct isp_video_queue *queue, + unsigned int *nbuffers, unsigned int *size); + int (*buffer_prepare)(struct isp_video_buffer *buf); + void (*buffer_queue)(struct isp_video_buffer *buf); + void (*buffer_cleanup)(struct isp_video_buffer *buf); +}; + +/** + * struct isp_video_queue - ISP video buffers queue + * @type: Type of video buffers handled by this queue + * @ops: Queue operations + * @dev: Device used for DMA operations + * @bufsize: Size of a driver-specific buffer object + * @count: Number of currently allocated buffers + * @buffers: ISP video buffers + * @lock: Mutex to protect access to the buffers, main queue and state + * @irqlock: Spinlock to protect access to the IRQ queue + * @streaming: Queue state, indicates whether the queue is streaming + * @queue: List of all queued buffers + */ +struct isp_video_queue { + enum v4l2_buf_type type; + const struct isp_video_queue_operations *ops; + struct device *dev; + unsigned int bufsize; + + unsigned int count; + struct isp_video_buffer *buffers[ISP_VIDEO_MAX_BUFFERS]; + struct mutex lock; + spinlock_t irqlock; + + unsigned int streaming:1; + + struct list_head queue; +}; + +int omap3isp_video_queue_cleanup(struct isp_video_queue *queue); +int omap3isp_video_queue_init(struct isp_video_queue *queue, + enum v4l2_buf_type type, + const struct isp_video_queue_operations *ops, + struct device *dev, unsigned int bufsize); + +int omap3isp_video_queue_reqbufs(struct isp_video_queue *queue, + struct v4l2_requestbuffers *rb); +int omap3isp_video_queue_querybuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf); +int omap3isp_video_queue_qbuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf); +int omap3isp_video_queue_dqbuf(struct isp_video_queue *queue, + struct v4l2_buffer *vbuf, int nonblocking); +int omap3isp_video_queue_streamon(struct isp_video_queue *queue); +void omap3isp_video_queue_streamoff(struct isp_video_queue *queue); +void omap3isp_video_queue_discard_done(struct isp_video_queue *queue); +int omap3isp_video_queue_mmap(struct isp_video_queue *queue, + struct vm_area_struct *vma); +unsigned int omap3isp_video_queue_poll(struct isp_video_queue *queue, + struct file *file, poll_table *wait); + +#endif /* OMAP3_ISP_QUEUE_H */ diff --git a/drivers/media/video/omap3isp/ispreg.h b/drivers/media/video/omap3isp/ispreg.h new file mode 100644 index 000000000000..69f6af6f6b9c --- /dev/null +++ b/drivers/media/video/omap3isp/ispreg.h @@ -0,0 +1,1589 @@ +/* + * ispreg.h + * + * TI OMAP3 ISP - Registers definitions + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_REG_H +#define OMAP3_ISP_REG_H + +#include <plat/omap34xx.h> + + +#define CM_CAM_MCLK_HZ 172800000 /* Hz */ + +/* ISP Submodules offset */ + +#define OMAP3ISP_REG_BASE OMAP3430_ISP_BASE +#define OMAP3ISP_REG(offset) (OMAP3ISP_REG_BASE + (offset)) + +#define OMAP3ISP_CCP2_REG_OFFSET 0x0400 +#define OMAP3ISP_CCP2_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CCP2_REG_OFFSET) +#define OMAP3ISP_CCP2_REG(offset) (OMAP3ISP_CCP2_REG_BASE + (offset)) + +#define OMAP3ISP_CCDC_REG_OFFSET 0x0600 +#define OMAP3ISP_CCDC_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CCDC_REG_OFFSET) +#define OMAP3ISP_CCDC_REG(offset) (OMAP3ISP_CCDC_REG_BASE + (offset)) + +#define OMAP3ISP_HIST_REG_OFFSET 0x0A00 +#define OMAP3ISP_HIST_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_HIST_REG_OFFSET) +#define OMAP3ISP_HIST_REG(offset) (OMAP3ISP_HIST_REG_BASE + (offset)) + +#define OMAP3ISP_H3A_REG_OFFSET 0x0C00 +#define OMAP3ISP_H3A_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_H3A_REG_OFFSET) +#define OMAP3ISP_H3A_REG(offset) (OMAP3ISP_H3A_REG_BASE + (offset)) + +#define OMAP3ISP_PREV_REG_OFFSET 0x0E00 +#define OMAP3ISP_PREV_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_PREV_REG_OFFSET) +#define OMAP3ISP_PREV_REG(offset) (OMAP3ISP_PREV_REG_BASE + (offset)) + +#define OMAP3ISP_RESZ_REG_OFFSET 0x1000 +#define OMAP3ISP_RESZ_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_RESZ_REG_OFFSET) +#define OMAP3ISP_RESZ_REG(offset) (OMAP3ISP_RESZ_REG_BASE + (offset)) + +#define OMAP3ISP_SBL_REG_OFFSET 0x1200 +#define OMAP3ISP_SBL_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_SBL_REG_OFFSET) +#define OMAP3ISP_SBL_REG(offset) (OMAP3ISP_SBL_REG_BASE + (offset)) + +#define OMAP3ISP_CSI2A_REGS1_REG_OFFSET 0x1800 +#define OMAP3ISP_CSI2A_REGS1_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSI2A_REGS1_REG_OFFSET) +#define OMAP3ISP_CSI2A_REGS1_REG(offset) \ + (OMAP3ISP_CSI2A_REGS1_REG_BASE + (offset)) + +#define OMAP3ISP_CSIPHY2_REG_OFFSET 0x1970 +#define OMAP3ISP_CSIPHY2_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSIPHY2_REG_OFFSET) +#define OMAP3ISP_CSIPHY2_REG(offset) (OMAP3ISP_CSIPHY2_REG_BASE + (offset)) + +#define OMAP3ISP_CSI2A_REGS2_REG_OFFSET 0x19C0 +#define OMAP3ISP_CSI2A_REGS2_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSI2A_REGS2_REG_OFFSET) +#define OMAP3ISP_CSI2A_REGS2_REG(offset) \ + (OMAP3ISP_CSI2A_REGS2_REG_BASE + (offset)) + +#define OMAP3ISP_CSI2C_REGS1_REG_OFFSET 0x1C00 +#define OMAP3ISP_CSI2C_REGS1_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSI2C_REGS1_REG_OFFSET) +#define OMAP3ISP_CSI2C_REGS1_REG(offset) \ + (OMAP3ISP_CSI2C_REGS1_REG_BASE + (offset)) + +#define OMAP3ISP_CSIPHY1_REG_OFFSET 0x1D70 +#define OMAP3ISP_CSIPHY1_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSIPHY1_REG_OFFSET) +#define OMAP3ISP_CSIPHY1_REG(offset) (OMAP3ISP_CSIPHY1_REG_BASE + (offset)) + +#define OMAP3ISP_CSI2C_REGS2_REG_OFFSET 0x1DC0 +#define OMAP3ISP_CSI2C_REGS2_REG_BASE (OMAP3ISP_REG_BASE + \ + OMAP3ISP_CSI2C_REGS2_REG_OFFSET) +#define OMAP3ISP_CSI2C_REGS2_REG(offset) \ + (OMAP3ISP_CSI2C_REGS2_REG_BASE + (offset)) + +/* ISP module register offset */ + +#define ISP_REVISION (0x000) +#define ISP_SYSCONFIG (0x004) +#define ISP_SYSSTATUS (0x008) +#define ISP_IRQ0ENABLE (0x00C) +#define ISP_IRQ0STATUS (0x010) +#define ISP_IRQ1ENABLE (0x014) +#define ISP_IRQ1STATUS (0x018) +#define ISP_TCTRL_GRESET_LENGTH (0x030) +#define ISP_TCTRL_PSTRB_REPLAY (0x034) +#define ISP_CTRL (0x040) +#define ISP_SECURE (0x044) +#define ISP_TCTRL_CTRL (0x050) +#define ISP_TCTRL_FRAME (0x054) +#define ISP_TCTRL_PSTRB_DELAY (0x058) +#define ISP_TCTRL_STRB_DELAY (0x05C) +#define ISP_TCTRL_SHUT_DELAY (0x060) +#define ISP_TCTRL_PSTRB_LENGTH (0x064) +#define ISP_TCTRL_STRB_LENGTH (0x068) +#define ISP_TCTRL_SHUT_LENGTH (0x06C) +#define ISP_PING_PONG_ADDR (0x070) +#define ISP_PING_PONG_MEM_RANGE (0x074) +#define ISP_PING_PONG_BUF_SIZE (0x078) + +/* CCP2 receiver registers */ + +#define ISPCCP2_REVISION (0x000) +#define ISPCCP2_SYSCONFIG (0x004) +#define ISPCCP2_SYSCONFIG_SOFT_RESET (1 << 1) +#define ISPCCP2_SYSCONFIG_AUTO_IDLE 0x1 +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT 12 +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_FORCE \ + (0x0 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_NO \ + (0x1 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART \ + (0x2 << ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCCP2_SYSSTATUS (0x008) +#define ISPCCP2_SYSSTATUS_RESET_DONE (1 << 0) +#define ISPCCP2_LC01_IRQENABLE (0x00C) +#define ISPCCP2_LC01_IRQSTATUS (0x010) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ (1 << 11) +#define ISPCCP2_LC01_IRQSTATUS_LC0_LE_IRQ (1 << 10) +#define ISPCCP2_LC01_IRQSTATUS_LC0_LS_IRQ (1 << 9) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FE_IRQ (1 << 8) +#define ISPCCP2_LC01_IRQSTATUS_LC0_COUNT_IRQ (1 << 7) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ (1 << 5) +#define ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ (1 << 4) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ (1 << 3) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ (1 << 2) +#define ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ (1 << 1) +#define ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ (1 << 0) + +#define ISPCCP2_LC23_IRQENABLE (0x014) +#define ISPCCP2_LC23_IRQSTATUS (0x018) +#define ISPCCP2_LCM_IRQENABLE (0x02C) +#define ISPCCP2_LCM_IRQSTATUS_EOF_IRQ (1 << 0) +#define ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ (1 << 1) +#define ISPCCP2_LCM_IRQSTATUS (0x030) +#define ISPCCP2_CTRL (0x040) +#define ISPCCP2_CTRL_IF_EN (1 << 0) +#define ISPCCP2_CTRL_PHY_SEL (1 << 1) +#define ISPCCP2_CTRL_PHY_SEL_CLOCK (0 << 1) +#define ISPCCP2_CTRL_PHY_SEL_STROBE (1 << 1) +#define ISPCCP2_CTRL_PHY_SEL_MASK 0x1 +#define ISPCCP2_CTRL_PHY_SEL_SHIFT 1 +#define ISPCCP2_CTRL_IO_OUT_SEL (1 << 2) +#define ISPCCP2_CTRL_MODE (1 << 4) +#define ISPCCP2_CTRL_VP_CLK_FORCE_ON (1 << 9) +#define ISPCCP2_CTRL_INV (1 << 10) +#define ISPCCP2_CTRL_INV_MASK 0x1 +#define ISPCCP2_CTRL_INV_SHIFT 10 +#define ISPCCP2_CTRL_VP_ONLY_EN (1 << 11) +#define ISPCCP2_CTRL_VP_CLK_POL (1 << 12) +#define ISPCCP2_CTRL_VPCLK_DIV_SHIFT 15 +#define ISPCCP2_CTRL_VPCLK_DIV_MASK 0x1ffff /* [31:15] */ +#define ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT 8 /* 3430 bits */ +#define ISPCCP2_CTRL_VP_OUT_CTRL_MASK 0x3 /* 3430 bits */ +#define ISPCCP2_DBG (0x044) +#define ISPCCP2_GNQ (0x048) +#define ISPCCP2_LCx_CTRL(x) ((0x050)+0x30*(x)) +#define ISPCCP2_LCx_CTRL_CHAN_EN (1 << 0) +#define ISPCCP2_LCx_CTRL_CRC_EN (1 << 19) +#define ISPCCP2_LCx_CTRL_CRC_MASK 0x1 +#define ISPCCP2_LCx_CTRL_CRC_SHIFT 2 +#define ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0 19 +#define ISPCCP2_LCx_CTRL_REGION_EN (1 << 1) +#define ISPCCP2_LCx_CTRL_REGION_MASK 0x1 +#define ISPCCP2_LCx_CTRL_REGION_SHIFT 1 +#define ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0 0x3f +#define ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0 0x2 +#define ISPCCP2_LCx_CTRL_FORMAT_MASK 0x1f +#define ISPCCP2_LCx_CTRL_FORMAT_SHIFT 0x3 +#define ISPCCP2_LCx_CODE(x) ((0x054)+0x30*(x)) +#define ISPCCP2_LCx_STAT_START(x) ((0x058)+0x30*(x)) +#define ISPCCP2_LCx_STAT_SIZE(x) ((0x05C)+0x30*(x)) +#define ISPCCP2_LCx_SOF_ADDR(x) ((0x060)+0x30*(x)) +#define ISPCCP2_LCx_EOF_ADDR(x) ((0x064)+0x30*(x)) +#define ISPCCP2_LCx_DAT_START(x) ((0x068)+0x30*(x)) +#define ISPCCP2_LCx_DAT_SIZE(x) ((0x06C)+0x30*(x)) +#define ISPCCP2_LCx_DAT_MASK 0xFFF +#define ISPCCP2_LCx_DAT_SHIFT 16 +#define ISPCCP2_LCx_DAT_PING_ADDR(x) ((0x070)+0x30*(x)) +#define ISPCCP2_LCx_DAT_PONG_ADDR(x) ((0x074)+0x30*(x)) +#define ISPCCP2_LCx_DAT_OFST(x) ((0x078)+0x30*(x)) +#define ISPCCP2_LCM_CTRL (0x1D0) +#define ISPCCP2_LCM_CTRL_CHAN_EN (1 << 0) +#define ISPCCP2_LCM_CTRL_DST_PORT (1 << 2) +#define ISPCCP2_LCM_CTRL_DST_PORT_SHIFT 2 +#define ISPCCP2_LCM_CTRL_READ_THROTTLE_SHIFT 3 +#define ISPCCP2_LCM_CTRL_READ_THROTTLE_MASK 0x11 +#define ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT 5 +#define ISPCCP2_LCM_CTRL_BURST_SIZE_MASK 0x7 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT 16 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_MASK 0x7 +#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT 20 +#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_MASK 0x3 +#define ISPCCP2_LCM_CTRL_SRC_DPCM_PRED (1 << 22) +#define ISPCCP2_LCM_CTRL_SRC_PACK (1 << 23) +#define ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT 24 +#define ISPCCP2_LCM_CTRL_DST_FORMAT_MASK 0x7 +#define ISPCCP2_LCM_VSIZE (0x1D4) +#define ISPCCP2_LCM_VSIZE_SHIFT 16 +#define ISPCCP2_LCM_HSIZE (0x1D8) +#define ISPCCP2_LCM_HSIZE_SHIFT 16 +#define ISPCCP2_LCM_PREFETCH (0x1DC) +#define ISPCCP2_LCM_PREFETCH_SHIFT 3 +#define ISPCCP2_LCM_SRC_ADDR (0x1E0) +#define ISPCCP2_LCM_SRC_OFST (0x1E4) +#define ISPCCP2_LCM_DST_ADDR (0x1E8) +#define ISPCCP2_LCM_DST_OFST (0x1EC) + +/* CCDC module register offset */ + +#define ISPCCDC_PID (0x000) +#define ISPCCDC_PCR (0x004) +#define ISPCCDC_SYN_MODE (0x008) +#define ISPCCDC_HD_VD_WID (0x00C) +#define ISPCCDC_PIX_LINES (0x010) +#define ISPCCDC_HORZ_INFO (0x014) +#define ISPCCDC_VERT_START (0x018) +#define ISPCCDC_VERT_LINES (0x01C) +#define ISPCCDC_CULLING (0x020) +#define ISPCCDC_HSIZE_OFF (0x024) +#define ISPCCDC_SDOFST (0x028) +#define ISPCCDC_SDR_ADDR (0x02C) +#define ISPCCDC_CLAMP (0x030) +#define ISPCCDC_DCSUB (0x034) +#define ISPCCDC_COLPTN (0x038) +#define ISPCCDC_BLKCMP (0x03C) +#define ISPCCDC_FPC (0x040) +#define ISPCCDC_FPC_ADDR (0x044) +#define ISPCCDC_VDINT (0x048) +#define ISPCCDC_ALAW (0x04C) +#define ISPCCDC_REC656IF (0x050) +#define ISPCCDC_CFG (0x054) +#define ISPCCDC_FMTCFG (0x058) +#define ISPCCDC_FMT_HORZ (0x05C) +#define ISPCCDC_FMT_VERT (0x060) +#define ISPCCDC_FMT_ADDR0 (0x064) +#define ISPCCDC_FMT_ADDR1 (0x068) +#define ISPCCDC_FMT_ADDR2 (0x06C) +#define ISPCCDC_FMT_ADDR3 (0x070) +#define ISPCCDC_FMT_ADDR4 (0x074) +#define ISPCCDC_FMT_ADDR5 (0x078) +#define ISPCCDC_FMT_ADDR6 (0x07C) +#define ISPCCDC_FMT_ADDR7 (0x080) +#define ISPCCDC_PRGEVEN0 (0x084) +#define ISPCCDC_PRGEVEN1 (0x088) +#define ISPCCDC_PRGODD0 (0x08C) +#define ISPCCDC_PRGODD1 (0x090) +#define ISPCCDC_VP_OUT (0x094) + +#define ISPCCDC_LSC_CONFIG (0x098) +#define ISPCCDC_LSC_INITIAL (0x09C) +#define ISPCCDC_LSC_TABLE_BASE (0x0A0) +#define ISPCCDC_LSC_TABLE_OFFSET (0x0A4) + +/* SBL */ +#define ISPSBL_PCR 0x4 +#define ISPSBL_PCR_H3A_AEAWB_WBL_OVF (1 << 16) +#define ISPSBL_PCR_H3A_AF_WBL_OVF (1 << 17) +#define ISPSBL_PCR_RSZ4_WBL_OVF (1 << 18) +#define ISPSBL_PCR_RSZ3_WBL_OVF (1 << 19) +#define ISPSBL_PCR_RSZ2_WBL_OVF (1 << 20) +#define ISPSBL_PCR_RSZ1_WBL_OVF (1 << 21) +#define ISPSBL_PCR_PRV_WBL_OVF (1 << 22) +#define ISPSBL_PCR_CCDC_WBL_OVF (1 << 23) +#define ISPSBL_PCR_CCDCPRV_2_RSZ_OVF (1 << 24) +#define ISPSBL_PCR_CSIA_WBL_OVF (1 << 25) +#define ISPSBL_PCR_CSIB_WBL_OVF (1 << 26) +#define ISPSBL_CCDC_WR_0 (0x028) +#define ISPSBL_CCDC_WR_0_DATA_READY (1 << 21) +#define ISPSBL_CCDC_WR_1 (0x02C) +#define ISPSBL_CCDC_WR_2 (0x030) +#define ISPSBL_CCDC_WR_3 (0x034) + +#define ISPSBL_SDR_REQ_EXP 0xF8 +#define ISPSBL_SDR_REQ_HIST_EXP_SHIFT 0 +#define ISPSBL_SDR_REQ_HIST_EXP_MASK (0x3FF) +#define ISPSBL_SDR_REQ_RSZ_EXP_SHIFT 10 +#define ISPSBL_SDR_REQ_RSZ_EXP_MASK (0x3FF << ISPSBL_SDR_REQ_RSZ_EXP_SHIFT) +#define ISPSBL_SDR_REQ_PRV_EXP_SHIFT 20 +#define ISPSBL_SDR_REQ_PRV_EXP_MASK (0x3FF << ISPSBL_SDR_REQ_PRV_EXP_SHIFT) + +/* Histogram registers */ +#define ISPHIST_PID (0x000) +#define ISPHIST_PCR (0x004) +#define ISPHIST_CNT (0x008) +#define ISPHIST_WB_GAIN (0x00C) +#define ISPHIST_R0_HORZ (0x010) +#define ISPHIST_R0_VERT (0x014) +#define ISPHIST_R1_HORZ (0x018) +#define ISPHIST_R1_VERT (0x01C) +#define ISPHIST_R2_HORZ (0x020) +#define ISPHIST_R2_VERT (0x024) +#define ISPHIST_R3_HORZ (0x028) +#define ISPHIST_R3_VERT (0x02C) +#define ISPHIST_ADDR (0x030) +#define ISPHIST_DATA (0x034) +#define ISPHIST_RADD (0x038) +#define ISPHIST_RADD_OFF (0x03C) +#define ISPHIST_H_V_INFO (0x040) + +/* H3A module registers */ +#define ISPH3A_PID (0x000) +#define ISPH3A_PCR (0x004) +#define ISPH3A_AEWWIN1 (0x04C) +#define ISPH3A_AEWINSTART (0x050) +#define ISPH3A_AEWINBLK (0x054) +#define ISPH3A_AEWSUBWIN (0x058) +#define ISPH3A_AEWBUFST (0x05C) +#define ISPH3A_AFPAX1 (0x008) +#define ISPH3A_AFPAX2 (0x00C) +#define ISPH3A_AFPAXSTART (0x010) +#define ISPH3A_AFIIRSH (0x014) +#define ISPH3A_AFBUFST (0x018) +#define ISPH3A_AFCOEF010 (0x01C) +#define ISPH3A_AFCOEF032 (0x020) +#define ISPH3A_AFCOEF054 (0x024) +#define ISPH3A_AFCOEF076 (0x028) +#define ISPH3A_AFCOEF098 (0x02C) +#define ISPH3A_AFCOEF0010 (0x030) +#define ISPH3A_AFCOEF110 (0x034) +#define ISPH3A_AFCOEF132 (0x038) +#define ISPH3A_AFCOEF154 (0x03C) +#define ISPH3A_AFCOEF176 (0x040) +#define ISPH3A_AFCOEF198 (0x044) +#define ISPH3A_AFCOEF1010 (0x048) + +#define ISPPRV_PCR (0x004) +#define ISPPRV_HORZ_INFO (0x008) +#define ISPPRV_VERT_INFO (0x00C) +#define ISPPRV_RSDR_ADDR (0x010) +#define ISPPRV_RADR_OFFSET (0x014) +#define ISPPRV_DSDR_ADDR (0x018) +#define ISPPRV_DRKF_OFFSET (0x01C) +#define ISPPRV_WSDR_ADDR (0x020) +#define ISPPRV_WADD_OFFSET (0x024) +#define ISPPRV_AVE (0x028) +#define ISPPRV_HMED (0x02C) +#define ISPPRV_NF (0x030) +#define ISPPRV_WB_DGAIN (0x034) +#define ISPPRV_WBGAIN (0x038) +#define ISPPRV_WBSEL (0x03C) +#define ISPPRV_CFA (0x040) +#define ISPPRV_BLKADJOFF (0x044) +#define ISPPRV_RGB_MAT1 (0x048) +#define ISPPRV_RGB_MAT2 (0x04C) +#define ISPPRV_RGB_MAT3 (0x050) +#define ISPPRV_RGB_MAT4 (0x054) +#define ISPPRV_RGB_MAT5 (0x058) +#define ISPPRV_RGB_OFF1 (0x05C) +#define ISPPRV_RGB_OFF2 (0x060) +#define ISPPRV_CSC0 (0x064) +#define ISPPRV_CSC1 (0x068) +#define ISPPRV_CSC2 (0x06C) +#define ISPPRV_CSC_OFFSET (0x070) +#define ISPPRV_CNT_BRT (0x074) +#define ISPPRV_CSUP (0x078) +#define ISPPRV_SETUP_YC (0x07C) +#define ISPPRV_SET_TBL_ADDR (0x080) +#define ISPPRV_SET_TBL_DATA (0x084) +#define ISPPRV_CDC_THR0 (0x090) +#define ISPPRV_CDC_THR1 (ISPPRV_CDC_THR0 + (0x4)) +#define ISPPRV_CDC_THR2 (ISPPRV_CDC_THR0 + (0x4) * 2) +#define ISPPRV_CDC_THR3 (ISPPRV_CDC_THR0 + (0x4) * 3) + +#define ISPPRV_REDGAMMA_TABLE_ADDR 0x0000 +#define ISPPRV_GREENGAMMA_TABLE_ADDR 0x0400 +#define ISPPRV_BLUEGAMMA_TABLE_ADDR 0x0800 +#define ISPPRV_NF_TABLE_ADDR 0x0C00 +#define ISPPRV_YENH_TABLE_ADDR 0x1000 +#define ISPPRV_CFA_TABLE_ADDR 0x1400 + +#define ISPPRV_MAXOUTPUT_WIDTH 1280 +#define ISPPRV_MAXOUTPUT_WIDTH_ES2 3300 +#define ISPPRV_MAXOUTPUT_WIDTH_3630 4096 +#define ISPRSZ_MIN_OUTPUT 64 +#define ISPRSZ_MAX_OUTPUT 3312 + +/* Resizer module register offset */ +#define ISPRSZ_PID (0x000) +#define ISPRSZ_PCR (0x004) +#define ISPRSZ_CNT (0x008) +#define ISPRSZ_OUT_SIZE (0x00C) +#define ISPRSZ_IN_START (0x010) +#define ISPRSZ_IN_SIZE (0x014) +#define ISPRSZ_SDR_INADD (0x018) +#define ISPRSZ_SDR_INOFF (0x01C) +#define ISPRSZ_SDR_OUTADD (0x020) +#define ISPRSZ_SDR_OUTOFF (0x024) +#define ISPRSZ_HFILT10 (0x028) +#define ISPRSZ_HFILT32 (0x02C) +#define ISPRSZ_HFILT54 (0x030) +#define ISPRSZ_HFILT76 (0x034) +#define ISPRSZ_HFILT98 (0x038) +#define ISPRSZ_HFILT1110 (0x03C) +#define ISPRSZ_HFILT1312 (0x040) +#define ISPRSZ_HFILT1514 (0x044) +#define ISPRSZ_HFILT1716 (0x048) +#define ISPRSZ_HFILT1918 (0x04C) +#define ISPRSZ_HFILT2120 (0x050) +#define ISPRSZ_HFILT2322 (0x054) +#define ISPRSZ_HFILT2524 (0x058) +#define ISPRSZ_HFILT2726 (0x05C) +#define ISPRSZ_HFILT2928 (0x060) +#define ISPRSZ_HFILT3130 (0x064) +#define ISPRSZ_VFILT10 (0x068) +#define ISPRSZ_VFILT32 (0x06C) +#define ISPRSZ_VFILT54 (0x070) +#define ISPRSZ_VFILT76 (0x074) +#define ISPRSZ_VFILT98 (0x078) +#define ISPRSZ_VFILT1110 (0x07C) +#define ISPRSZ_VFILT1312 (0x080) +#define ISPRSZ_VFILT1514 (0x084) +#define ISPRSZ_VFILT1716 (0x088) +#define ISPRSZ_VFILT1918 (0x08C) +#define ISPRSZ_VFILT2120 (0x090) +#define ISPRSZ_VFILT2322 (0x094) +#define ISPRSZ_VFILT2524 (0x098) +#define ISPRSZ_VFILT2726 (0x09C) +#define ISPRSZ_VFILT2928 (0x0A0) +#define ISPRSZ_VFILT3130 (0x0A4) +#define ISPRSZ_YENH (0x0A8) + +#define ISP_INT_CLR 0xFF113F11 +#define ISPPRV_PCR_EN 1 +#define ISPPRV_PCR_BUSY (1 << 1) +#define ISPPRV_PCR_SOURCE (1 << 2) +#define ISPPRV_PCR_ONESHOT (1 << 3) +#define ISPPRV_PCR_WIDTH (1 << 4) +#define ISPPRV_PCR_INVALAW (1 << 5) +#define ISPPRV_PCR_DRKFEN (1 << 6) +#define ISPPRV_PCR_DRKFCAP (1 << 7) +#define ISPPRV_PCR_HMEDEN (1 << 8) +#define ISPPRV_PCR_NFEN (1 << 9) +#define ISPPRV_PCR_CFAEN (1 << 10) +#define ISPPRV_PCR_CFAFMT_SHIFT 11 +#define ISPPRV_PCR_CFAFMT_MASK 0x7800 +#define ISPPRV_PCR_CFAFMT_BAYER (0 << 11) +#define ISPPRV_PCR_CFAFMT_SONYVGA (1 << 11) +#define ISPPRV_PCR_CFAFMT_RGBFOVEON (2 << 11) +#define ISPPRV_PCR_CFAFMT_DNSPL (3 << 11) +#define ISPPRV_PCR_CFAFMT_HONEYCOMB (4 << 11) +#define ISPPRV_PCR_CFAFMT_RRGGBBFOVEON (5 << 11) +#define ISPPRV_PCR_YNENHEN (1 << 15) +#define ISPPRV_PCR_SUPEN (1 << 16) +#define ISPPRV_PCR_YCPOS_SHIFT 17 +#define ISPPRV_PCR_YCPOS_YCrYCb (0 << 17) +#define ISPPRV_PCR_YCPOS_YCbYCr (1 << 17) +#define ISPPRV_PCR_YCPOS_CbYCrY (2 << 17) +#define ISPPRV_PCR_YCPOS_CrYCbY (3 << 17) +#define ISPPRV_PCR_RSZPORT (1 << 19) +#define ISPPRV_PCR_SDRPORT (1 << 20) +#define ISPPRV_PCR_SCOMP_EN (1 << 21) +#define ISPPRV_PCR_SCOMP_SFT_SHIFT (22) +#define ISPPRV_PCR_SCOMP_SFT_MASK (7 << 22) +#define ISPPRV_PCR_GAMMA_BYPASS (1 << 26) +#define ISPPRV_PCR_DCOREN (1 << 27) +#define ISPPRV_PCR_DCCOUP (1 << 28) +#define ISPPRV_PCR_DRK_FAIL (1 << 31) + +#define ISPPRV_HORZ_INFO_EPH_SHIFT 0 +#define ISPPRV_HORZ_INFO_EPH_MASK 0x3fff +#define ISPPRV_HORZ_INFO_SPH_SHIFT 16 +#define ISPPRV_HORZ_INFO_SPH_MASK 0x3fff0 + +#define ISPPRV_VERT_INFO_ELV_SHIFT 0 +#define ISPPRV_VERT_INFO_ELV_MASK 0x3fff +#define ISPPRV_VERT_INFO_SLV_SHIFT 16 +#define ISPPRV_VERT_INFO_SLV_MASK 0x3fff0 + +#define ISPPRV_AVE_EVENDIST_SHIFT 2 +#define ISPPRV_AVE_EVENDIST_1 0x0 +#define ISPPRV_AVE_EVENDIST_2 0x1 +#define ISPPRV_AVE_EVENDIST_3 0x2 +#define ISPPRV_AVE_EVENDIST_4 0x3 +#define ISPPRV_AVE_ODDDIST_SHIFT 4 +#define ISPPRV_AVE_ODDDIST_1 0x0 +#define ISPPRV_AVE_ODDDIST_2 0x1 +#define ISPPRV_AVE_ODDDIST_3 0x2 +#define ISPPRV_AVE_ODDDIST_4 0x3 + +#define ISPPRV_HMED_THRESHOLD_SHIFT 0 +#define ISPPRV_HMED_EVENDIST (1 << 8) +#define ISPPRV_HMED_ODDDIST (1 << 9) + +#define ISPPRV_WBGAIN_COEF0_SHIFT 0 +#define ISPPRV_WBGAIN_COEF1_SHIFT 8 +#define ISPPRV_WBGAIN_COEF2_SHIFT 16 +#define ISPPRV_WBGAIN_COEF3_SHIFT 24 + +#define ISPPRV_WBSEL_COEF0 0x0 +#define ISPPRV_WBSEL_COEF1 0x1 +#define ISPPRV_WBSEL_COEF2 0x2 +#define ISPPRV_WBSEL_COEF3 0x3 + +#define ISPPRV_WBSEL_N0_0_SHIFT 0 +#define ISPPRV_WBSEL_N0_1_SHIFT 2 +#define ISPPRV_WBSEL_N0_2_SHIFT 4 +#define ISPPRV_WBSEL_N0_3_SHIFT 6 +#define ISPPRV_WBSEL_N1_0_SHIFT 8 +#define ISPPRV_WBSEL_N1_1_SHIFT 10 +#define ISPPRV_WBSEL_N1_2_SHIFT 12 +#define ISPPRV_WBSEL_N1_3_SHIFT 14 +#define ISPPRV_WBSEL_N2_0_SHIFT 16 +#define ISPPRV_WBSEL_N2_1_SHIFT 18 +#define ISPPRV_WBSEL_N2_2_SHIFT 20 +#define ISPPRV_WBSEL_N2_3_SHIFT 22 +#define ISPPRV_WBSEL_N3_0_SHIFT 24 +#define ISPPRV_WBSEL_N3_1_SHIFT 26 +#define ISPPRV_WBSEL_N3_2_SHIFT 28 +#define ISPPRV_WBSEL_N3_3_SHIFT 30 + +#define ISPPRV_CFA_GRADTH_HOR_SHIFT 0 +#define ISPPRV_CFA_GRADTH_VER_SHIFT 8 + +#define ISPPRV_BLKADJOFF_B_SHIFT 0 +#define ISPPRV_BLKADJOFF_G_SHIFT 8 +#define ISPPRV_BLKADJOFF_R_SHIFT 16 + +#define ISPPRV_RGB_MAT1_MTX_RR_SHIFT 0 +#define ISPPRV_RGB_MAT1_MTX_GR_SHIFT 16 + +#define ISPPRV_RGB_MAT2_MTX_BR_SHIFT 0 +#define ISPPRV_RGB_MAT2_MTX_RG_SHIFT 16 + +#define ISPPRV_RGB_MAT3_MTX_GG_SHIFT 0 +#define ISPPRV_RGB_MAT3_MTX_BG_SHIFT 16 + +#define ISPPRV_RGB_MAT4_MTX_RB_SHIFT 0 +#define ISPPRV_RGB_MAT4_MTX_GB_SHIFT 16 + +#define ISPPRV_RGB_MAT5_MTX_BB_SHIFT 0 + +#define ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT 0 +#define ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT 16 + +#define ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT 0 + +#define ISPPRV_CSC0_RY_SHIFT 0 +#define ISPPRV_CSC0_GY_SHIFT 10 +#define ISPPRV_CSC0_BY_SHIFT 20 + +#define ISPPRV_CSC1_RCB_SHIFT 0 +#define ISPPRV_CSC1_GCB_SHIFT 10 +#define ISPPRV_CSC1_BCB_SHIFT 20 + +#define ISPPRV_CSC2_RCR_SHIFT 0 +#define ISPPRV_CSC2_GCR_SHIFT 10 +#define ISPPRV_CSC2_BCR_SHIFT 20 + +#define ISPPRV_CSC_OFFSET_CR_SHIFT 0 +#define ISPPRV_CSC_OFFSET_CB_SHIFT 8 +#define ISPPRV_CSC_OFFSET_Y_SHIFT 16 + +#define ISPPRV_CNT_BRT_BRT_SHIFT 0 +#define ISPPRV_CNT_BRT_CNT_SHIFT 8 + +#define ISPPRV_CONTRAST_MAX 0x10 +#define ISPPRV_CONTRAST_MIN 0xFF +#define ISPPRV_BRIGHT_MIN 0x00 +#define ISPPRV_BRIGHT_MAX 0xFF + +#define ISPPRV_CSUP_CSUPG_SHIFT 0 +#define ISPPRV_CSUP_THRES_SHIFT 8 +#define ISPPRV_CSUP_HPYF_SHIFT 16 + +#define ISPPRV_SETUP_YC_MINC_SHIFT 0 +#define ISPPRV_SETUP_YC_MAXC_SHIFT 8 +#define ISPPRV_SETUP_YC_MINY_SHIFT 16 +#define ISPPRV_SETUP_YC_MAXY_SHIFT 24 +#define ISPPRV_YC_MAX 0xFF +#define ISPPRV_YC_MIN 0x0 + +/* Define bit fields within selected registers */ +#define ISP_REVISION_SHIFT 0 + +#define ISP_SYSCONFIG_AUTOIDLE (1 << 0) +#define ISP_SYSCONFIG_SOFTRESET (1 << 1) +#define ISP_SYSCONFIG_MIDLEMODE_SHIFT 12 +#define ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY 0x0 +#define ISP_SYSCONFIG_MIDLEMODE_NOSTANBY 0x1 +#define ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY 0x2 + +#define ISP_SYSSTATUS_RESETDONE 0 + +#define IRQ0ENABLE_CSIA_IRQ (1 << 0) +#define IRQ0ENABLE_CSIC_IRQ (1 << 1) +#define IRQ0ENABLE_CCP2_LCM_IRQ (1 << 3) +#define IRQ0ENABLE_CCP2_LC0_IRQ (1 << 4) +#define IRQ0ENABLE_CCP2_LC1_IRQ (1 << 5) +#define IRQ0ENABLE_CCP2_LC2_IRQ (1 << 6) +#define IRQ0ENABLE_CCP2_LC3_IRQ (1 << 7) +#define IRQ0ENABLE_CSIB_IRQ (IRQ0ENABLE_CCP2_LCM_IRQ | \ + IRQ0ENABLE_CCP2_LC0_IRQ | \ + IRQ0ENABLE_CCP2_LC1_IRQ | \ + IRQ0ENABLE_CCP2_LC2_IRQ | \ + IRQ0ENABLE_CCP2_LC3_IRQ) + +#define IRQ0ENABLE_CCDC_VD0_IRQ (1 << 8) +#define IRQ0ENABLE_CCDC_VD1_IRQ (1 << 9) +#define IRQ0ENABLE_CCDC_VD2_IRQ (1 << 10) +#define IRQ0ENABLE_CCDC_ERR_IRQ (1 << 11) +#define IRQ0ENABLE_H3A_AF_DONE_IRQ (1 << 12) +#define IRQ0ENABLE_H3A_AWB_DONE_IRQ (1 << 13) +#define IRQ0ENABLE_HIST_DONE_IRQ (1 << 16) +#define IRQ0ENABLE_CCDC_LSC_DONE_IRQ (1 << 17) +#define IRQ0ENABLE_CCDC_LSC_PREF_COMP_IRQ (1 << 18) +#define IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ (1 << 19) +#define IRQ0ENABLE_PRV_DONE_IRQ (1 << 20) +#define IRQ0ENABLE_RSZ_DONE_IRQ (1 << 24) +#define IRQ0ENABLE_OVF_IRQ (1 << 25) +#define IRQ0ENABLE_PING_IRQ (1 << 26) +#define IRQ0ENABLE_PONG_IRQ (1 << 27) +#define IRQ0ENABLE_MMU_ERR_IRQ (1 << 28) +#define IRQ0ENABLE_OCP_ERR_IRQ (1 << 29) +#define IRQ0ENABLE_SEC_ERR_IRQ (1 << 30) +#define IRQ0ENABLE_HS_VS_IRQ (1 << 31) + +#define IRQ0STATUS_CSIA_IRQ (1 << 0) +#define IRQ0STATUS_CSI2C_IRQ (1 << 1) +#define IRQ0STATUS_CCP2_LCM_IRQ (1 << 3) +#define IRQ0STATUS_CCP2_LC0_IRQ (1 << 4) +#define IRQ0STATUS_CSIB_IRQ (IRQ0STATUS_CCP2_LCM_IRQ | \ + IRQ0STATUS_CCP2_LC0_IRQ) + +#define IRQ0STATUS_CSIB_LC1_IRQ (1 << 5) +#define IRQ0STATUS_CSIB_LC2_IRQ (1 << 6) +#define IRQ0STATUS_CSIB_LC3_IRQ (1 << 7) +#define IRQ0STATUS_CCDC_VD0_IRQ (1 << 8) +#define IRQ0STATUS_CCDC_VD1_IRQ (1 << 9) +#define IRQ0STATUS_CCDC_VD2_IRQ (1 << 10) +#define IRQ0STATUS_CCDC_ERR_IRQ (1 << 11) +#define IRQ0STATUS_H3A_AF_DONE_IRQ (1 << 12) +#define IRQ0STATUS_H3A_AWB_DONE_IRQ (1 << 13) +#define IRQ0STATUS_HIST_DONE_IRQ (1 << 16) +#define IRQ0STATUS_CCDC_LSC_DONE_IRQ (1 << 17) +#define IRQ0STATUS_CCDC_LSC_PREF_COMP_IRQ (1 << 18) +#define IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ (1 << 19) +#define IRQ0STATUS_PRV_DONE_IRQ (1 << 20) +#define IRQ0STATUS_RSZ_DONE_IRQ (1 << 24) +#define IRQ0STATUS_OVF_IRQ (1 << 25) +#define IRQ0STATUS_PING_IRQ (1 << 26) +#define IRQ0STATUS_PONG_IRQ (1 << 27) +#define IRQ0STATUS_MMU_ERR_IRQ (1 << 28) +#define IRQ0STATUS_OCP_ERR_IRQ (1 << 29) +#define IRQ0STATUS_SEC_ERR_IRQ (1 << 30) +#define IRQ0STATUS_HS_VS_IRQ (1 << 31) + +#define TCTRL_GRESET_LEN 0 + +#define TCTRL_PSTRB_REPLAY_DELAY 0 +#define TCTRL_PSTRB_REPLAY_COUNTER_SHIFT 25 + +#define ISPCTRL_PAR_SER_CLK_SEL_PARALLEL 0x0 +#define ISPCTRL_PAR_SER_CLK_SEL_CSIA 0x1 +#define ISPCTRL_PAR_SER_CLK_SEL_CSIB 0x2 +#define ISPCTRL_PAR_SER_CLK_SEL_CSIC 0x3 +#define ISPCTRL_PAR_SER_CLK_SEL_MASK 0x3 + +#define ISPCTRL_PAR_BRIDGE_SHIFT 2 +#define ISPCTRL_PAR_BRIDGE_DISABLE (0x0 << 2) +#define ISPCTRL_PAR_BRIDGE_LENDIAN (0x2 << 2) +#define ISPCTRL_PAR_BRIDGE_BENDIAN (0x3 << 2) +#define ISPCTRL_PAR_BRIDGE_MASK (0x3 << 2) + +#define ISPCTRL_PAR_CLK_POL_SHIFT 4 +#define ISPCTRL_PAR_CLK_POL_INV (1 << 4) +#define ISPCTRL_PING_PONG_EN (1 << 5) +#define ISPCTRL_SHIFT_SHIFT 6 +#define ISPCTRL_SHIFT_0 (0x0 << 6) +#define ISPCTRL_SHIFT_2 (0x1 << 6) +#define ISPCTRL_SHIFT_4 (0x2 << 6) +#define ISPCTRL_SHIFT_MASK (0x3 << 6) + +#define ISPCTRL_CCDC_CLK_EN (1 << 8) +#define ISPCTRL_SCMP_CLK_EN (1 << 9) +#define ISPCTRL_H3A_CLK_EN (1 << 10) +#define ISPCTRL_HIST_CLK_EN (1 << 11) +#define ISPCTRL_PREV_CLK_EN (1 << 12) +#define ISPCTRL_RSZ_CLK_EN (1 << 13) +#define ISPCTRL_SYNC_DETECT_SHIFT 14 +#define ISPCTRL_SYNC_DETECT_HSFALL (0x0 << ISPCTRL_SYNC_DETECT_SHIFT) +#define ISPCTRL_SYNC_DETECT_HSRISE (0x1 << ISPCTRL_SYNC_DETECT_SHIFT) +#define ISPCTRL_SYNC_DETECT_VSFALL (0x2 << ISPCTRL_SYNC_DETECT_SHIFT) +#define ISPCTRL_SYNC_DETECT_VSRISE (0x3 << ISPCTRL_SYNC_DETECT_SHIFT) +#define ISPCTRL_SYNC_DETECT_MASK (0x3 << ISPCTRL_SYNC_DETECT_SHIFT) + +#define ISPCTRL_CCDC_RAM_EN (1 << 16) +#define ISPCTRL_PREV_RAM_EN (1 << 17) +#define ISPCTRL_SBL_RD_RAM_EN (1 << 18) +#define ISPCTRL_SBL_WR1_RAM_EN (1 << 19) +#define ISPCTRL_SBL_WR0_RAM_EN (1 << 20) +#define ISPCTRL_SBL_AUTOIDLE (1 << 21) +#define ISPCTRL_SBL_SHARED_WPORTC (1 << 26) +#define ISPCTRL_SBL_SHARED_RPORTA (1 << 27) +#define ISPCTRL_SBL_SHARED_RPORTB (1 << 28) +#define ISPCTRL_JPEG_FLUSH (1 << 30) +#define ISPCTRL_CCDC_FLUSH (1 << 31) + +#define ISPSECURE_SECUREMODE 0 + +#define ISPTCTRL_CTRL_DIV_LOW 0x0 +#define ISPTCTRL_CTRL_DIV_HIGH 0x1 +#define ISPTCTRL_CTRL_DIV_BYPASS 0x1F + +#define ISPTCTRL_CTRL_DIVA_SHIFT 0 +#define ISPTCTRL_CTRL_DIVA_MASK (0x1F << ISPTCTRL_CTRL_DIVA_SHIFT) + +#define ISPTCTRL_CTRL_DIVB_SHIFT 5 +#define ISPTCTRL_CTRL_DIVB_MASK (0x1F << ISPTCTRL_CTRL_DIVB_SHIFT) + +#define ISPTCTRL_CTRL_DIVC_SHIFT 10 +#define ISPTCTRL_CTRL_DIVC_NOCLOCK (0x0 << 10) + +#define ISPTCTRL_CTRL_SHUTEN (1 << 21) +#define ISPTCTRL_CTRL_PSTRBEN (1 << 22) +#define ISPTCTRL_CTRL_STRBEN (1 << 23) +#define ISPTCTRL_CTRL_SHUTPOL (1 << 24) +#define ISPTCTRL_CTRL_STRBPSTRBPOL (1 << 26) + +#define ISPTCTRL_CTRL_INSEL_SHIFT 27 +#define ISPTCTRL_CTRL_INSEL_PARALLEL (0x0 << 27) +#define ISPTCTRL_CTRL_INSEL_CSIA (0x1 << 27) +#define ISPTCTRL_CTRL_INSEL_CSIB (0x2 << 27) + +#define ISPTCTRL_CTRL_GRESETEn (1 << 29) +#define ISPTCTRL_CTRL_GRESETPOL (1 << 30) +#define ISPTCTRL_CTRL_GRESETDIR (1 << 31) + +#define ISPTCTRL_FRAME_SHUT_SHIFT 0 +#define ISPTCTRL_FRAME_PSTRB_SHIFT 6 +#define ISPTCTRL_FRAME_STRB_SHIFT 12 + +#define ISPCCDC_PID_PREV_SHIFT 0 +#define ISPCCDC_PID_CID_SHIFT 8 +#define ISPCCDC_PID_TID_SHIFT 16 + +#define ISPCCDC_PCR_EN 1 +#define ISPCCDC_PCR_BUSY (1 << 1) + +#define ISPCCDC_SYN_MODE_VDHDOUT 0x1 +#define ISPCCDC_SYN_MODE_FLDOUT (1 << 1) +#define ISPCCDC_SYN_MODE_VDPOL (1 << 2) +#define ISPCCDC_SYN_MODE_HDPOL (1 << 3) +#define ISPCCDC_SYN_MODE_FLDPOL (1 << 4) +#define ISPCCDC_SYN_MODE_EXWEN (1 << 5) +#define ISPCCDC_SYN_MODE_DATAPOL (1 << 6) +#define ISPCCDC_SYN_MODE_FLDMODE (1 << 7) +#define ISPCCDC_SYN_MODE_DATSIZ_MASK (0x7 << 8) +#define ISPCCDC_SYN_MODE_DATSIZ_8_16 (0x0 << 8) +#define ISPCCDC_SYN_MODE_DATSIZ_12 (0x4 << 8) +#define ISPCCDC_SYN_MODE_DATSIZ_11 (0x5 << 8) +#define ISPCCDC_SYN_MODE_DATSIZ_10 (0x6 << 8) +#define ISPCCDC_SYN_MODE_DATSIZ_8 (0x7 << 8) +#define ISPCCDC_SYN_MODE_PACK8 (1 << 11) +#define ISPCCDC_SYN_MODE_INPMOD_MASK (3 << 12) +#define ISPCCDC_SYN_MODE_INPMOD_RAW (0 << 12) +#define ISPCCDC_SYN_MODE_INPMOD_YCBCR16 (1 << 12) +#define ISPCCDC_SYN_MODE_INPMOD_YCBCR8 (2 << 12) +#define ISPCCDC_SYN_MODE_LPF (1 << 14) +#define ISPCCDC_SYN_MODE_FLDSTAT (1 << 15) +#define ISPCCDC_SYN_MODE_VDHDEN (1 << 16) +#define ISPCCDC_SYN_MODE_WEN (1 << 17) +#define ISPCCDC_SYN_MODE_VP2SDR (1 << 18) +#define ISPCCDC_SYN_MODE_SDR2RSZ (1 << 19) + +#define ISPCCDC_HD_VD_WID_VDW_SHIFT 0 +#define ISPCCDC_HD_VD_WID_HDW_SHIFT 16 + +#define ISPCCDC_PIX_LINES_HLPRF_SHIFT 0 +#define ISPCCDC_PIX_LINES_PPLN_SHIFT 16 + +#define ISPCCDC_HORZ_INFO_NPH_SHIFT 0 +#define ISPCCDC_HORZ_INFO_NPH_MASK 0x00007fff +#define ISPCCDC_HORZ_INFO_SPH_SHIFT 16 +#define ISPCCDC_HORZ_INFO_SPH_MASK 0x7fff0000 + +#define ISPCCDC_VERT_START_SLV1_SHIFT 0 +#define ISPCCDC_VERT_START_SLV0_SHIFT 16 +#define ISPCCDC_VERT_START_SLV0_MASK 0x7fff0000 + +#define ISPCCDC_VERT_LINES_NLV_SHIFT 0 +#define ISPCCDC_VERT_LINES_NLV_MASK 0x00007fff + +#define ISPCCDC_CULLING_CULV_SHIFT 0 +#define ISPCCDC_CULLING_CULHODD_SHIFT 16 +#define ISPCCDC_CULLING_CULHEVN_SHIFT 24 + +#define ISPCCDC_HSIZE_OFF_SHIFT 0 + +#define ISPCCDC_SDOFST_FINV (1 << 14) +#define ISPCCDC_SDOFST_FOFST_1L 0 +#define ISPCCDC_SDOFST_FOFST_4L (3 << 12) +#define ISPCCDC_SDOFST_LOFST3_SHIFT 0 +#define ISPCCDC_SDOFST_LOFST2_SHIFT 3 +#define ISPCCDC_SDOFST_LOFST1_SHIFT 6 +#define ISPCCDC_SDOFST_LOFST0_SHIFT 9 +#define EVENEVEN 1 +#define ODDEVEN 2 +#define EVENODD 3 +#define ODDODD 4 + +#define ISPCCDC_CLAMP_OBGAIN_SHIFT 0 +#define ISPCCDC_CLAMP_OBST_SHIFT 10 +#define ISPCCDC_CLAMP_OBSLN_SHIFT 25 +#define ISPCCDC_CLAMP_OBSLEN_SHIFT 28 +#define ISPCCDC_CLAMP_CLAMPEN (1 << 31) + +#define ISPCCDC_COLPTN_R_Ye 0x0 +#define ISPCCDC_COLPTN_Gr_Cy 0x1 +#define ISPCCDC_COLPTN_Gb_G 0x2 +#define ISPCCDC_COLPTN_B_Mg 0x3 +#define ISPCCDC_COLPTN_CP0PLC0_SHIFT 0 +#define ISPCCDC_COLPTN_CP0PLC1_SHIFT 2 +#define ISPCCDC_COLPTN_CP0PLC2_SHIFT 4 +#define ISPCCDC_COLPTN_CP0PLC3_SHIFT 6 +#define ISPCCDC_COLPTN_CP1PLC0_SHIFT 8 +#define ISPCCDC_COLPTN_CP1PLC1_SHIFT 10 +#define ISPCCDC_COLPTN_CP1PLC2_SHIFT 12 +#define ISPCCDC_COLPTN_CP1PLC3_SHIFT 14 +#define ISPCCDC_COLPTN_CP2PLC0_SHIFT 16 +#define ISPCCDC_COLPTN_CP2PLC1_SHIFT 18 +#define ISPCCDC_COLPTN_CP2PLC2_SHIFT 20 +#define ISPCCDC_COLPTN_CP2PLC3_SHIFT 22 +#define ISPCCDC_COLPTN_CP3PLC0_SHIFT 24 +#define ISPCCDC_COLPTN_CP3PLC1_SHIFT 26 +#define ISPCCDC_COLPTN_CP3PLC2_SHIFT 28 +#define ISPCCDC_COLPTN_CP3PLC3_SHIFT 30 + +#define ISPCCDC_BLKCMP_B_MG_SHIFT 0 +#define ISPCCDC_BLKCMP_GB_G_SHIFT 8 +#define ISPCCDC_BLKCMP_GR_CY_SHIFT 16 +#define ISPCCDC_BLKCMP_R_YE_SHIFT 24 + +#define ISPCCDC_FPC_FPNUM_SHIFT 0 +#define ISPCCDC_FPC_FPCEN (1 << 15) +#define ISPCCDC_FPC_FPERR (1 << 16) + +#define ISPCCDC_VDINT_1_SHIFT 0 +#define ISPCCDC_VDINT_1_MASK 0x00007fff +#define ISPCCDC_VDINT_0_SHIFT 16 +#define ISPCCDC_VDINT_0_MASK 0x7fff0000 + +#define ISPCCDC_ALAW_GWDI_12_3 (0x3 << 0) +#define ISPCCDC_ALAW_GWDI_11_2 (0x4 << 0) +#define ISPCCDC_ALAW_GWDI_10_1 (0x5 << 0) +#define ISPCCDC_ALAW_GWDI_9_0 (0x6 << 0) +#define ISPCCDC_ALAW_CCDTBL (1 << 3) + +#define ISPCCDC_REC656IF_R656ON 1 +#define ISPCCDC_REC656IF_ECCFVH (1 << 1) + +#define ISPCCDC_CFG_BW656 (1 << 5) +#define ISPCCDC_CFG_FIDMD_SHIFT 6 +#define ISPCCDC_CFG_WENLOG (1 << 8) +#define ISPCCDC_CFG_WENLOG_AND (0 << 8) +#define ISPCCDC_CFG_WENLOG_OR (1 << 8) +#define ISPCCDC_CFG_Y8POS (1 << 11) +#define ISPCCDC_CFG_BSWD (1 << 12) +#define ISPCCDC_CFG_MSBINVI (1 << 13) +#define ISPCCDC_CFG_VDLC (1 << 15) + +#define ISPCCDC_FMTCFG_FMTEN 0x1 +#define ISPCCDC_FMTCFG_LNALT (1 << 1) +#define ISPCCDC_FMTCFG_LNUM_SHIFT 2 +#define ISPCCDC_FMTCFG_PLEN_ODD_SHIFT 4 +#define ISPCCDC_FMTCFG_PLEN_EVEN_SHIFT 8 +#define ISPCCDC_FMTCFG_VPIN_MASK 0x00007000 +#define ISPCCDC_FMTCFG_VPIN_12_3 (0x3 << 12) +#define ISPCCDC_FMTCFG_VPIN_11_2 (0x4 << 12) +#define ISPCCDC_FMTCFG_VPIN_10_1 (0x5 << 12) +#define ISPCCDC_FMTCFG_VPIN_9_0 (0x6 << 12) +#define ISPCCDC_FMTCFG_VPEN (1 << 15) + +#define ISPCCDC_FMTCFG_VPIF_FRQ_MASK 0x003f0000 +#define ISPCCDC_FMTCFG_VPIF_FRQ_SHIFT 16 +#define ISPCCDC_FMTCFG_VPIF_FRQ_BY2 (0x0 << 16) +#define ISPCCDC_FMTCFG_VPIF_FRQ_BY3 (0x1 << 16) +#define ISPCCDC_FMTCFG_VPIF_FRQ_BY4 (0x2 << 16) +#define ISPCCDC_FMTCFG_VPIF_FRQ_BY5 (0x3 << 16) +#define ISPCCDC_FMTCFG_VPIF_FRQ_BY6 (0x4 << 16) + +#define ISPCCDC_FMT_HORZ_FMTLNH_SHIFT 0 +#define ISPCCDC_FMT_HORZ_FMTSPH_SHIFT 16 + +#define ISPCCDC_FMT_VERT_FMTLNV_SHIFT 0 +#define ISPCCDC_FMT_VERT_FMTSLV_SHIFT 16 + +#define ISPCCDC_FMT_HORZ_FMTSPH_MASK 0x1fff0000 +#define ISPCCDC_FMT_HORZ_FMTLNH_MASK 0x00001fff + +#define ISPCCDC_FMT_VERT_FMTSLV_MASK 0x1fff0000 +#define ISPCCDC_FMT_VERT_FMTLNV_MASK 0x00001fff + +#define ISPCCDC_VP_OUT_HORZ_ST_SHIFT 0 +#define ISPCCDC_VP_OUT_HORZ_NUM_SHIFT 4 +#define ISPCCDC_VP_OUT_VERT_NUM_SHIFT 17 + +#define ISPRSZ_PID_PREV_SHIFT 0 +#define ISPRSZ_PID_CID_SHIFT 8 +#define ISPRSZ_PID_TID_SHIFT 16 + +#define ISPRSZ_PCR_ENABLE (1 << 0) +#define ISPRSZ_PCR_BUSY (1 << 1) +#define ISPRSZ_PCR_ONESHOT (1 << 2) + +#define ISPRSZ_CNT_HRSZ_SHIFT 0 +#define ISPRSZ_CNT_HRSZ_MASK \ + (0x3FF << ISPRSZ_CNT_HRSZ_SHIFT) +#define ISPRSZ_CNT_VRSZ_SHIFT 10 +#define ISPRSZ_CNT_VRSZ_MASK \ + (0x3FF << ISPRSZ_CNT_VRSZ_SHIFT) +#define ISPRSZ_CNT_HSTPH_SHIFT 20 +#define ISPRSZ_CNT_HSTPH_MASK (0x7 << ISPRSZ_CNT_HSTPH_SHIFT) +#define ISPRSZ_CNT_VSTPH_SHIFT 23 +#define ISPRSZ_CNT_VSTPH_MASK (0x7 << ISPRSZ_CNT_VSTPH_SHIFT) +#define ISPRSZ_CNT_YCPOS (1 << 26) +#define ISPRSZ_CNT_INPTYP (1 << 27) +#define ISPRSZ_CNT_INPSRC (1 << 28) +#define ISPRSZ_CNT_CBILIN (1 << 29) + +#define ISPRSZ_OUT_SIZE_HORZ_SHIFT 0 +#define ISPRSZ_OUT_SIZE_HORZ_MASK \ + (0xFFF << ISPRSZ_OUT_SIZE_HORZ_SHIFT) +#define ISPRSZ_OUT_SIZE_VERT_SHIFT 16 +#define ISPRSZ_OUT_SIZE_VERT_MASK \ + (0xFFF << ISPRSZ_OUT_SIZE_VERT_SHIFT) + +#define ISPRSZ_IN_START_HORZ_ST_SHIFT 0 +#define ISPRSZ_IN_START_HORZ_ST_MASK \ + (0x1FFF << ISPRSZ_IN_START_HORZ_ST_SHIFT) +#define ISPRSZ_IN_START_VERT_ST_SHIFT 16 +#define ISPRSZ_IN_START_VERT_ST_MASK \ + (0x1FFF << ISPRSZ_IN_START_VERT_ST_SHIFT) + +#define ISPRSZ_IN_SIZE_HORZ_SHIFT 0 +#define ISPRSZ_IN_SIZE_HORZ_MASK \ + (0x1FFF << ISPRSZ_IN_SIZE_HORZ_SHIFT) +#define ISPRSZ_IN_SIZE_VERT_SHIFT 16 +#define ISPRSZ_IN_SIZE_VERT_MASK \ + (0x1FFF << ISPRSZ_IN_SIZE_VERT_SHIFT) + +#define ISPRSZ_SDR_INADD_ADDR_SHIFT 0 +#define ISPRSZ_SDR_INADD_ADDR_MASK 0xFFFFFFFF + +#define ISPRSZ_SDR_INOFF_OFFSET_SHIFT 0 +#define ISPRSZ_SDR_INOFF_OFFSET_MASK \ + (0xFFFF << ISPRSZ_SDR_INOFF_OFFSET_SHIFT) + +#define ISPRSZ_SDR_OUTADD_ADDR_SHIFT 0 +#define ISPRSZ_SDR_OUTADD_ADDR_MASK 0xFFFFFFFF + + +#define ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT 0 +#define ISPRSZ_SDR_OUTOFF_OFFSET_MASK \ + (0xFFFF << ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT) + +#define ISPRSZ_HFILT_COEF0_SHIFT 0 +#define ISPRSZ_HFILT_COEF0_MASK \ + (0x3FF << ISPRSZ_HFILT_COEF0_SHIFT) +#define ISPRSZ_HFILT_COEF1_SHIFT 16 +#define ISPRSZ_HFILT_COEF1_MASK \ + (0x3FF << ISPRSZ_HFILT_COEF1_SHIFT) + +#define ISPRSZ_HFILT32_COEF2_SHIFT 0 +#define ISPRSZ_HFILT32_COEF2_MASK 0x3FF +#define ISPRSZ_HFILT32_COEF3_SHIFT 16 +#define ISPRSZ_HFILT32_COEF3_MASK 0x3FF0000 + +#define ISPRSZ_HFILT54_COEF4_SHIFT 0 +#define ISPRSZ_HFILT54_COEF4_MASK 0x3FF +#define ISPRSZ_HFILT54_COEF5_SHIFT 16 +#define ISPRSZ_HFILT54_COEF5_MASK 0x3FF0000 + +#define ISPRSZ_HFILT76_COEFF6_SHIFT 0 +#define ISPRSZ_HFILT76_COEFF6_MASK 0x3FF +#define ISPRSZ_HFILT76_COEFF7_SHIFT 16 +#define ISPRSZ_HFILT76_COEFF7_MASK 0x3FF0000 + +#define ISPRSZ_HFILT98_COEFF8_SHIFT 0 +#define ISPRSZ_HFILT98_COEFF8_MASK 0x3FF +#define ISPRSZ_HFILT98_COEFF9_SHIFT 16 +#define ISPRSZ_HFILT98_COEFF9_MASK 0x3FF0000 + +#define ISPRSZ_HFILT1110_COEF10_SHIFT 0 +#define ISPRSZ_HFILT1110_COEF10_MASK 0x3FF +#define ISPRSZ_HFILT1110_COEF11_SHIFT 16 +#define ISPRSZ_HFILT1110_COEF11_MASK 0x3FF0000 + +#define ISPRSZ_HFILT1312_COEFF12_SHIFT 0 +#define ISPRSZ_HFILT1312_COEFF12_MASK 0x3FF +#define ISPRSZ_HFILT1312_COEFF13_SHIFT 16 +#define ISPRSZ_HFILT1312_COEFF13_MASK 0x3FF0000 + +#define ISPRSZ_HFILT1514_COEFF14_SHIFT 0 +#define ISPRSZ_HFILT1514_COEFF14_MASK 0x3FF +#define ISPRSZ_HFILT1514_COEFF15_SHIFT 16 +#define ISPRSZ_HFILT1514_COEFF15_MASK 0x3FF0000 + +#define ISPRSZ_HFILT1716_COEF16_SHIFT 0 +#define ISPRSZ_HFILT1716_COEF16_MASK 0x3FF +#define ISPRSZ_HFILT1716_COEF17_SHIFT 16 +#define ISPRSZ_HFILT1716_COEF17_MASK 0x3FF0000 + +#define ISPRSZ_HFILT1918_COEF18_SHIFT 0 +#define ISPRSZ_HFILT1918_COEF18_MASK 0x3FF +#define ISPRSZ_HFILT1918_COEF19_SHIFT 16 +#define ISPRSZ_HFILT1918_COEF19_MASK 0x3FF0000 + +#define ISPRSZ_HFILT2120_COEF20_SHIFT 0 +#define ISPRSZ_HFILT2120_COEF20_MASK 0x3FF +#define ISPRSZ_HFILT2120_COEF21_SHIFT 16 +#define ISPRSZ_HFILT2120_COEF21_MASK 0x3FF0000 + +#define ISPRSZ_HFILT2322_COEF22_SHIFT 0 +#define ISPRSZ_HFILT2322_COEF22_MASK 0x3FF +#define ISPRSZ_HFILT2322_COEF23_SHIFT 16 +#define ISPRSZ_HFILT2322_COEF23_MASK 0x3FF0000 + +#define ISPRSZ_HFILT2524_COEF24_SHIFT 0 +#define ISPRSZ_HFILT2524_COEF24_MASK 0x3FF +#define ISPRSZ_HFILT2524_COEF25_SHIFT 16 +#define ISPRSZ_HFILT2524_COEF25_MASK 0x3FF0000 + +#define ISPRSZ_HFILT2726_COEF26_SHIFT 0 +#define ISPRSZ_HFILT2726_COEF26_MASK 0x3FF +#define ISPRSZ_HFILT2726_COEF27_SHIFT 16 +#define ISPRSZ_HFILT2726_COEF27_MASK 0x3FF0000 + +#define ISPRSZ_HFILT2928_COEF28_SHIFT 0 +#define ISPRSZ_HFILT2928_COEF28_MASK 0x3FF +#define ISPRSZ_HFILT2928_COEF29_SHIFT 16 +#define ISPRSZ_HFILT2928_COEF29_MASK 0x3FF0000 + +#define ISPRSZ_HFILT3130_COEF30_SHIFT 0 +#define ISPRSZ_HFILT3130_COEF30_MASK 0x3FF +#define ISPRSZ_HFILT3130_COEF31_SHIFT 16 +#define ISPRSZ_HFILT3130_COEF31_MASK 0x3FF0000 + +#define ISPRSZ_VFILT_COEF0_SHIFT 0 +#define ISPRSZ_VFILT_COEF0_MASK \ + (0x3FF << ISPRSZ_VFILT_COEF0_SHIFT) +#define ISPRSZ_VFILT_COEF1_SHIFT 16 +#define ISPRSZ_VFILT_COEF1_MASK \ + (0x3FF << ISPRSZ_VFILT_COEF1_SHIFT) + +#define ISPRSZ_VFILT10_COEF0_SHIFT 0 +#define ISPRSZ_VFILT10_COEF0_MASK 0x3FF +#define ISPRSZ_VFILT10_COEF1_SHIFT 16 +#define ISPRSZ_VFILT10_COEF1_MASK 0x3FF0000 + +#define ISPRSZ_VFILT32_COEF2_SHIFT 0 +#define ISPRSZ_VFILT32_COEF2_MASK 0x3FF +#define ISPRSZ_VFILT32_COEF3_SHIFT 16 +#define ISPRSZ_VFILT32_COEF3_MASK 0x3FF0000 + +#define ISPRSZ_VFILT54_COEF4_SHIFT 0 +#define ISPRSZ_VFILT54_COEF4_MASK 0x3FF +#define ISPRSZ_VFILT54_COEF5_SHIFT 16 +#define ISPRSZ_VFILT54_COEF5_MASK 0x3FF0000 + +#define ISPRSZ_VFILT76_COEFF6_SHIFT 0 +#define ISPRSZ_VFILT76_COEFF6_MASK 0x3FF +#define ISPRSZ_VFILT76_COEFF7_SHIFT 16 +#define ISPRSZ_VFILT76_COEFF7_MASK 0x3FF0000 + +#define ISPRSZ_VFILT98_COEFF8_SHIFT 0 +#define ISPRSZ_VFILT98_COEFF8_MASK 0x3FF +#define ISPRSZ_VFILT98_COEFF9_SHIFT 16 +#define ISPRSZ_VFILT98_COEFF9_MASK 0x3FF0000 + +#define ISPRSZ_VFILT1110_COEF10_SHIFT 0 +#define ISPRSZ_VFILT1110_COEF10_MASK 0x3FF +#define ISPRSZ_VFILT1110_COEF11_SHIFT 16 +#define ISPRSZ_VFILT1110_COEF11_MASK 0x3FF0000 + +#define ISPRSZ_VFILT1312_COEFF12_SHIFT 0 +#define ISPRSZ_VFILT1312_COEFF12_MASK 0x3FF +#define ISPRSZ_VFILT1312_COEFF13_SHIFT 16 +#define ISPRSZ_VFILT1312_COEFF13_MASK 0x3FF0000 + +#define ISPRSZ_VFILT1514_COEFF14_SHIFT 0 +#define ISPRSZ_VFILT1514_COEFF14_MASK 0x3FF +#define ISPRSZ_VFILT1514_COEFF15_SHIFT 16 +#define ISPRSZ_VFILT1514_COEFF15_MASK 0x3FF0000 + +#define ISPRSZ_VFILT1716_COEF16_SHIFT 0 +#define ISPRSZ_VFILT1716_COEF16_MASK 0x3FF +#define ISPRSZ_VFILT1716_COEF17_SHIFT 16 +#define ISPRSZ_VFILT1716_COEF17_MASK 0x3FF0000 + +#define ISPRSZ_VFILT1918_COEF18_SHIFT 0 +#define ISPRSZ_VFILT1918_COEF18_MASK 0x3FF +#define ISPRSZ_VFILT1918_COEF19_SHIFT 16 +#define ISPRSZ_VFILT1918_COEF19_MASK 0x3FF0000 + +#define ISPRSZ_VFILT2120_COEF20_SHIFT 0 +#define ISPRSZ_VFILT2120_COEF20_MASK 0x3FF +#define ISPRSZ_VFILT2120_COEF21_SHIFT 16 +#define ISPRSZ_VFILT2120_COEF21_MASK 0x3FF0000 + +#define ISPRSZ_VFILT2322_COEF22_SHIFT 0 +#define ISPRSZ_VFILT2322_COEF22_MASK 0x3FF +#define ISPRSZ_VFILT2322_COEF23_SHIFT 16 +#define ISPRSZ_VFILT2322_COEF23_MASK 0x3FF0000 + +#define ISPRSZ_VFILT2524_COEF24_SHIFT 0 +#define ISPRSZ_VFILT2524_COEF24_MASK 0x3FF +#define ISPRSZ_VFILT2524_COEF25_SHIFT 16 +#define ISPRSZ_VFILT2524_COEF25_MASK 0x3FF0000 + +#define ISPRSZ_VFILT2726_COEF26_SHIFT 0 +#define ISPRSZ_VFILT2726_COEF26_MASK 0x3FF +#define ISPRSZ_VFILT2726_COEF27_SHIFT 16 +#define ISPRSZ_VFILT2726_COEF27_MASK 0x3FF0000 + +#define ISPRSZ_VFILT2928_COEF28_SHIFT 0 +#define ISPRSZ_VFILT2928_COEF28_MASK 0x3FF +#define ISPRSZ_VFILT2928_COEF29_SHIFT 16 +#define ISPRSZ_VFILT2928_COEF29_MASK 0x3FF0000 + +#define ISPRSZ_VFILT3130_COEF30_SHIFT 0 +#define ISPRSZ_VFILT3130_COEF30_MASK 0x3FF +#define ISPRSZ_VFILT3130_COEF31_SHIFT 16 +#define ISPRSZ_VFILT3130_COEF31_MASK 0x3FF0000 + +#define ISPRSZ_YENH_CORE_SHIFT 0 +#define ISPRSZ_YENH_CORE_MASK \ + (0xFF << ISPRSZ_YENH_CORE_SHIFT) +#define ISPRSZ_YENH_SLOP_SHIFT 8 +#define ISPRSZ_YENH_SLOP_MASK \ + (0xF << ISPRSZ_YENH_SLOP_SHIFT) +#define ISPRSZ_YENH_GAIN_SHIFT 12 +#define ISPRSZ_YENH_GAIN_MASK \ + (0xF << ISPRSZ_YENH_GAIN_SHIFT) +#define ISPRSZ_YENH_ALGO_SHIFT 16 +#define ISPRSZ_YENH_ALGO_MASK \ + (0x3 << ISPRSZ_YENH_ALGO_SHIFT) + +#define ISPH3A_PCR_AEW_ALAW_EN_SHIFT 1 +#define ISPH3A_PCR_AF_MED_TH_SHIFT 3 +#define ISPH3A_PCR_AF_RGBPOS_SHIFT 11 +#define ISPH3A_PCR_AEW_AVE2LMT_SHIFT 22 +#define ISPH3A_PCR_AEW_AVE2LMT_MASK 0xFFC00000 +#define ISPH3A_PCR_BUSYAF (1 << 15) +#define ISPH3A_PCR_BUSYAEAWB (1 << 18) + +#define ISPH3A_AEWWIN1_WINHC_SHIFT 0 +#define ISPH3A_AEWWIN1_WINHC_MASK 0x3F +#define ISPH3A_AEWWIN1_WINVC_SHIFT 6 +#define ISPH3A_AEWWIN1_WINVC_MASK 0x1FC0 +#define ISPH3A_AEWWIN1_WINW_SHIFT 13 +#define ISPH3A_AEWWIN1_WINW_MASK 0xFE000 +#define ISPH3A_AEWWIN1_WINH_SHIFT 24 +#define ISPH3A_AEWWIN1_WINH_MASK 0x7F000000 + +#define ISPH3A_AEWINSTART_WINSH_SHIFT 0 +#define ISPH3A_AEWINSTART_WINSH_MASK 0x0FFF +#define ISPH3A_AEWINSTART_WINSV_SHIFT 16 +#define ISPH3A_AEWINSTART_WINSV_MASK 0x0FFF0000 + +#define ISPH3A_AEWINBLK_WINH_SHIFT 0 +#define ISPH3A_AEWINBLK_WINH_MASK 0x7F +#define ISPH3A_AEWINBLK_WINSV_SHIFT 16 +#define ISPH3A_AEWINBLK_WINSV_MASK 0x0FFF0000 + +#define ISPH3A_AEWSUBWIN_AEWINCH_SHIFT 0 +#define ISPH3A_AEWSUBWIN_AEWINCH_MASK 0x0F +#define ISPH3A_AEWSUBWIN_AEWINCV_SHIFT 8 +#define ISPH3A_AEWSUBWIN_AEWINCV_MASK 0x0F00 + +#define ISPHIST_PCR_ENABLE_SHIFT 0 +#define ISPHIST_PCR_ENABLE_MASK 0x01 +#define ISPHIST_PCR_ENABLE (1 << ISPHIST_PCR_ENABLE_SHIFT) +#define ISPHIST_PCR_BUSY 0x02 + +#define ISPHIST_CNT_DATASIZE_SHIFT 8 +#define ISPHIST_CNT_DATASIZE_MASK 0x0100 +#define ISPHIST_CNT_CLEAR_SHIFT 7 +#define ISPHIST_CNT_CLEAR_MASK 0x080 +#define ISPHIST_CNT_CLEAR (1 << ISPHIST_CNT_CLEAR_SHIFT) +#define ISPHIST_CNT_CFA_SHIFT 6 +#define ISPHIST_CNT_CFA_MASK 0x040 +#define ISPHIST_CNT_BINS_SHIFT 4 +#define ISPHIST_CNT_BINS_MASK 0x030 +#define ISPHIST_CNT_SOURCE_SHIFT 3 +#define ISPHIST_CNT_SOURCE_MASK 0x08 +#define ISPHIST_CNT_SHIFT_SHIFT 0 +#define ISPHIST_CNT_SHIFT_MASK 0x07 + +#define ISPHIST_WB_GAIN_WG00_SHIFT 24 +#define ISPHIST_WB_GAIN_WG00_MASK 0xFF000000 +#define ISPHIST_WB_GAIN_WG01_SHIFT 16 +#define ISPHIST_WB_GAIN_WG01_MASK 0xFF0000 +#define ISPHIST_WB_GAIN_WG02_SHIFT 8 +#define ISPHIST_WB_GAIN_WG02_MASK 0xFF00 +#define ISPHIST_WB_GAIN_WG03_SHIFT 0 +#define ISPHIST_WB_GAIN_WG03_MASK 0xFF + +#define ISPHIST_REG_START_END_MASK 0x3FFF +#define ISPHIST_REG_START_SHIFT 16 +#define ISPHIST_REG_END_SHIFT 0 +#define ISPHIST_REG_START_MASK (ISPHIST_REG_START_END_MASK << \ + ISPHIST_REG_START_SHIFT) +#define ISPHIST_REG_END_MASK (ISPHIST_REG_START_END_MASK << \ + ISPHIST_REG_END_SHIFT) + +#define ISPHIST_REG_MASK (ISPHIST_REG_START_MASK | \ + ISPHIST_REG_END_MASK) + +#define ISPHIST_ADDR_SHIFT 0 +#define ISPHIST_ADDR_MASK 0x3FF + +#define ISPHIST_DATA_SHIFT 0 +#define ISPHIST_DATA_MASK 0xFFFFF + +#define ISPHIST_RADD_SHIFT 0 +#define ISPHIST_RADD_MASK 0xFFFFFFFF + +#define ISPHIST_RADD_OFF_SHIFT 0 +#define ISPHIST_RADD_OFF_MASK 0xFFFF + +#define ISPHIST_HV_INFO_HSIZE_SHIFT 16 +#define ISPHIST_HV_INFO_HSIZE_MASK 0x3FFF0000 +#define ISPHIST_HV_INFO_VSIZE_SHIFT 0 +#define ISPHIST_HV_INFO_VSIZE_MASK 0x3FFF + +#define ISPHIST_HV_INFO_MASK 0x3FFF3FFF + +#define ISPCCDC_LSC_ENABLE 1 +#define ISPCCDC_LSC_BUSY (1 << 7) +#define ISPCCDC_LSC_GAIN_MODE_N_MASK 0x700 +#define ISPCCDC_LSC_GAIN_MODE_N_SHIFT 8 +#define ISPCCDC_LSC_GAIN_MODE_M_MASK 0x3800 +#define ISPCCDC_LSC_GAIN_MODE_M_SHIFT 12 +#define ISPCCDC_LSC_GAIN_FORMAT_MASK 0xE +#define ISPCCDC_LSC_GAIN_FORMAT_SHIFT 1 +#define ISPCCDC_LSC_AFTER_REFORMATTER_MASK (1<<6) + +#define ISPCCDC_LSC_INITIAL_X_MASK 0x3F +#define ISPCCDC_LSC_INITIAL_X_SHIFT 0 +#define ISPCCDC_LSC_INITIAL_Y_MASK 0x3F0000 +#define ISPCCDC_LSC_INITIAL_Y_SHIFT 16 + +/* ----------------------------------------------------------------------------- + * CSI2 receiver registers (ES2.0) + */ + +#define ISPCSI2_REVISION (0x000) +#define ISPCSI2_SYSCONFIG (0x010) +#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT 12 +#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK \ + (0x3 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_FORCE \ + (0x0 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO \ + (0x1 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART \ + (0x2 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) +#define ISPCSI2_SYSCONFIG_SOFT_RESET (1 << 1) +#define ISPCSI2_SYSCONFIG_AUTO_IDLE (1 << 0) + +#define ISPCSI2_SYSSTATUS (0x014) +#define ISPCSI2_SYSSTATUS_RESET_DONE (1 << 0) + +#define ISPCSI2_IRQSTATUS (0x018) +#define ISPCSI2_IRQSTATUS_OCP_ERR_IRQ (1 << 14) +#define ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ (1 << 13) +#define ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ (1 << 12) +#define ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ (1 << 11) +#define ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ (1 << 10) +#define ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ (1 << 9) +#define ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ (1 << 8) +#define ISPCSI2_IRQSTATUS_CONTEXT(n) (1 << (n)) + +#define ISPCSI2_IRQENABLE (0x01c) +#define ISPCSI2_CTRL (0x040) +#define ISPCSI2_CTRL_VP_CLK_EN (1 << 15) +#define ISPCSI2_CTRL_VP_ONLY_EN (1 << 11) +#define ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT 8 +#define ISPCSI2_CTRL_VP_OUT_CTRL_MASK \ + (3 << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) +#define ISPCSI2_CTRL_DBG_EN (1 << 7) +#define ISPCSI2_CTRL_BURST_SIZE_SHIFT 5 +#define ISPCSI2_CTRL_BURST_SIZE_MASK \ + (3 << ISPCSI2_CTRL_BURST_SIZE_SHIFT) +#define ISPCSI2_CTRL_FRAME (1 << 3) +#define ISPCSI2_CTRL_ECC_EN (1 << 2) +#define ISPCSI2_CTRL_SECURE (1 << 1) +#define ISPCSI2_CTRL_IF_EN (1 << 0) + +#define ISPCSI2_DBG_H (0x044) +#define ISPCSI2_GNQ (0x048) +#define ISPCSI2_PHY_CFG (0x050) +#define ISPCSI2_PHY_CFG_RESET_CTRL (1 << 30) +#define ISPCSI2_PHY_CFG_RESET_DONE (1 << 29) +#define ISPCSI2_PHY_CFG_PWR_CMD_SHIFT 27 +#define ISPCSI2_PHY_CFG_PWR_CMD_MASK \ + (0x3 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_CMD_OFF \ + (0x0 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_CMD_ON \ + (0x1 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_CMD_ULPW \ + (0x2 << ISPCSI2_PHY_CFG_PWR_CMD_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT 25 +#define ISPCSI2_PHY_CFG_PWR_STATUS_MASK \ + (0x3 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_STATUS_OFF \ + (0x0 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_STATUS_ON \ + (0x1 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_STATUS_ULPW \ + (0x2 << ISPCSI2_PHY_CFG_PWR_STATUS_SHIFT) +#define ISPCSI2_PHY_CFG_PWR_AUTO (1 << 24) + +#define ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n) (3 + ((n) * 4)) +#define ISPCSI2_PHY_CFG_DATA_POL_MASK(n) \ + (0x1 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POL_PN(n) \ + (0x0 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POL_NP(n) \ + (0x1 << ISPCSI2_PHY_CFG_DATA_POL_SHIFT(n)) + +#define ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n) ((n) * 4) +#define ISPCSI2_PHY_CFG_DATA_POSITION_MASK(n) \ + (0x7 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_NC(n) \ + (0x0 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_1(n) \ + (0x1 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_2(n) \ + (0x2 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_3(n) \ + (0x3 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_4(n) \ + (0x4 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) +#define ISPCSI2_PHY_CFG_DATA_POSITION_5(n) \ + (0x5 << ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(n)) + +#define ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT 3 +#define ISPCSI2_PHY_CFG_CLOCK_POL_MASK \ + (0x1 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POL_PN \ + (0x0 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POL_NP \ + (0x1 << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT) + +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT 0 +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK \ + (0x7 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_1 \ + (0x1 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_2 \ + (0x2 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_3 \ + (0x3 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_4 \ + (0x4 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) +#define ISPCSI2_PHY_CFG_CLOCK_POSITION_5 \ + (0x5 << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT) + +#define ISPCSI2_PHY_IRQSTATUS (0x054) +#define ISPCSI2_PHY_IRQSTATUS_STATEALLULPMEXIT (1 << 26) +#define ISPCSI2_PHY_IRQSTATUS_STATEALLULPMENTER (1 << 25) +#define ISPCSI2_PHY_IRQSTATUS_STATEULPM5 (1 << 24) +#define ISPCSI2_PHY_IRQSTATUS_STATEULPM4 (1 << 23) +#define ISPCSI2_PHY_IRQSTATUS_STATEULPM3 (1 << 22) +#define ISPCSI2_PHY_IRQSTATUS_STATEULPM2 (1 << 21) +#define ISPCSI2_PHY_IRQSTATUS_STATEULPM1 (1 << 20) +#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL5 (1 << 19) +#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL4 (1 << 18) +#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL3 (1 << 17) +#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL2 (1 << 16) +#define ISPCSI2_PHY_IRQSTATUS_ERRCONTROL1 (1 << 15) +#define ISPCSI2_PHY_IRQSTATUS_ERRESC5 (1 << 14) +#define ISPCSI2_PHY_IRQSTATUS_ERRESC4 (1 << 13) +#define ISPCSI2_PHY_IRQSTATUS_ERRESC3 (1 << 12) +#define ISPCSI2_PHY_IRQSTATUS_ERRESC2 (1 << 11) +#define ISPCSI2_PHY_IRQSTATUS_ERRESC1 (1 << 10) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS5 (1 << 9) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS4 (1 << 8) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS3 (1 << 7) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS2 (1 << 6) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTSYNCHS1 (1 << 5) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS5 (1 << 4) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS4 (1 << 3) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS3 (1 << 2) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS2 (1 << 1) +#define ISPCSI2_PHY_IRQSTATUS_ERRSOTHS1 1 + +#define ISPCSI2_SHORT_PACKET (0x05c) +#define ISPCSI2_PHY_IRQENABLE (0x060) +#define ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT (1 << 26) +#define ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER (1 << 25) +#define ISPCSI2_PHY_IRQENABLE_STATEULPM5 (1 << 24) +#define ISPCSI2_PHY_IRQENABLE_STATEULPM4 (1 << 23) +#define ISPCSI2_PHY_IRQENABLE_STATEULPM3 (1 << 22) +#define ISPCSI2_PHY_IRQENABLE_STATEULPM2 (1 << 21) +#define ISPCSI2_PHY_IRQENABLE_STATEULPM1 (1 << 20) +#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 (1 << 19) +#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 (1 << 18) +#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 (1 << 17) +#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 (1 << 16) +#define ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 (1 << 15) +#define ISPCSI2_PHY_IRQENABLE_ERRESC5 (1 << 14) +#define ISPCSI2_PHY_IRQENABLE_ERRESC4 (1 << 13) +#define ISPCSI2_PHY_IRQENABLE_ERRESC3 (1 << 12) +#define ISPCSI2_PHY_IRQENABLE_ERRESC2 (1 << 11) +#define ISPCSI2_PHY_IRQENABLE_ERRESC1 (1 << 10) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 (1 << 9) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 (1 << 8) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 (1 << 7) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 (1 << 6) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 (1 << 5) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 (1 << 4) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 (1 << 3) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 (1 << 2) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 (1 << 1) +#define ISPCSI2_PHY_IRQENABLE_ERRSOTHS1 (1 << 0) + +#define ISPCSI2_DBG_P (0x068) +#define ISPCSI2_TIMING (0x06c) +#define ISPCSI2_TIMING_FORCE_RX_MODE_IO(n) (1 << ((16 * ((n) - 1)) + 15)) +#define ISPCSI2_TIMING_STOP_STATE_X16_IO(n) (1 << ((16 * ((n) - 1)) + 14)) +#define ISPCSI2_TIMING_STOP_STATE_X4_IO(n) (1 << ((16 * ((n) - 1)) + 13)) +#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n) (16 * ((n) - 1)) +#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(n) \ + (0x1fff << ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n)) + +#define ISPCSI2_CTX_CTRL1(n) ((0x070) + 0x20 * (n)) +#define ISPCSI2_CTX_CTRL1_COUNT_SHIFT 8 +#define ISPCSI2_CTX_CTRL1_COUNT_MASK \ + (0xff << ISPCSI2_CTX_CTRL1_COUNT_SHIFT) +#define ISPCSI2_CTX_CTRL1_EOF_EN (1 << 7) +#define ISPCSI2_CTX_CTRL1_EOL_EN (1 << 6) +#define ISPCSI2_CTX_CTRL1_CS_EN (1 << 5) +#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK (1 << 4) +#define ISPCSI2_CTX_CTRL1_PING_PONG (1 << 3) +#define ISPCSI2_CTX_CTRL1_CTX_EN (1 << 0) + +#define ISPCSI2_CTX_CTRL2(n) ((0x074) + 0x20 * (n)) +#define ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT 13 +#define ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK \ + (0x3 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT) +#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT 11 +#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK \ + (0x3 << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT) +#define ISPCSI2_CTX_CTRL2_DPCM_PRED (1 << 10) +#define ISPCSI2_CTX_CTRL2_FORMAT_SHIFT 0 +#define ISPCSI2_CTX_CTRL2_FORMAT_MASK \ + (0x3ff << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT) +#define ISPCSI2_CTX_CTRL2_FRAME_SHIFT 16 +#define ISPCSI2_CTX_CTRL2_FRAME_MASK \ + (0xffff << ISPCSI2_CTX_CTRL2_FRAME_SHIFT) + +#define ISPCSI2_CTX_DAT_OFST(n) ((0x078) + 0x20 * (n)) +#define ISPCSI2_CTX_DAT_OFST_OFST_SHIFT 0 +#define ISPCSI2_CTX_DAT_OFST_OFST_MASK \ + (0x1ffe0 << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT) + +#define ISPCSI2_CTX_DAT_PING_ADDR(n) ((0x07c) + 0x20 * (n)) +#define ISPCSI2_CTX_DAT_PONG_ADDR(n) ((0x080) + 0x20 * (n)) +#define ISPCSI2_CTX_IRQENABLE(n) ((0x084) + 0x20 * (n)) +#define ISPCSI2_CTX_IRQENABLE_ECC_CORRECTION_IRQ (1 << 8) +#define ISPCSI2_CTX_IRQENABLE_LINE_NUMBER_IRQ (1 << 7) +#define ISPCSI2_CTX_IRQENABLE_FRAME_NUMBER_IRQ (1 << 6) +#define ISPCSI2_CTX_IRQENABLE_CS_IRQ (1 << 5) +#define ISPCSI2_CTX_IRQENABLE_LE_IRQ (1 << 3) +#define ISPCSI2_CTX_IRQENABLE_LS_IRQ (1 << 2) +#define ISPCSI2_CTX_IRQENABLE_FE_IRQ (1 << 1) +#define ISPCSI2_CTX_IRQENABLE_FS_IRQ (1 << 0) + +#define ISPCSI2_CTX_IRQSTATUS(n) ((0x088) + 0x20 * (n)) +#define ISPCSI2_CTX_IRQSTATUS_ECC_CORRECTION_IRQ (1 << 8) +#define ISPCSI2_CTX_IRQSTATUS_LINE_NUMBER_IRQ (1 << 7) +#define ISPCSI2_CTX_IRQSTATUS_FRAME_NUMBER_IRQ (1 << 6) +#define ISPCSI2_CTX_IRQSTATUS_CS_IRQ (1 << 5) +#define ISPCSI2_CTX_IRQSTATUS_LE_IRQ (1 << 3) +#define ISPCSI2_CTX_IRQSTATUS_LS_IRQ (1 << 2) +#define ISPCSI2_CTX_IRQSTATUS_FE_IRQ (1 << 1) +#define ISPCSI2_CTX_IRQSTATUS_FS_IRQ (1 << 0) + +#define ISPCSI2_CTX_CTRL3(n) ((0x08c) + 0x20 * (n)) +#define ISPCSI2_CTX_CTRL3_ALPHA_SHIFT 5 +#define ISPCSI2_CTX_CTRL3_ALPHA_MASK \ + (0x3fff << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT) + +/* This instance is for OMAP3630 only */ +#define ISPCSI2_CTX_TRANSCODEH(n) (0x000 + 0x8 * (n)) +#define ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT 16 +#define ISPCSI2_CTX_TRANSCODEH_HCOUNT_MASK \ + (0x1fff << ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT) +#define ISPCSI2_CTX_TRANSCODEH_HSKIP_SHIFT 0 +#define ISPCSI2_CTX_TRANSCODEH_HSKIP_MASK \ + (0x1fff << ISPCSI2_CTX_TRANSCODEH_HCOUNT_SHIFT) +#define ISPCSI2_CTX_TRANSCODEV(n) (0x004 + 0x8 * (n)) +#define ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT 16 +#define ISPCSI2_CTX_TRANSCODEV_VCOUNT_MASK \ + (0x1fff << ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT) +#define ISPCSI2_CTX_TRANSCODEV_VSKIP_SHIFT 0 +#define ISPCSI2_CTX_TRANSCODEV_VSKIP_MASK \ + (0x1fff << ISPCSI2_CTX_TRANSCODEV_VCOUNT_SHIFT) + +/* ----------------------------------------------------------------------------- + * CSI PHY registers + */ + +#define ISPCSIPHY_REG0 (0x000) +#define ISPCSIPHY_REG0_THS_TERM_SHIFT 8 +#define ISPCSIPHY_REG0_THS_TERM_MASK \ + (0xff << ISPCSIPHY_REG0_THS_TERM_SHIFT) +#define ISPCSIPHY_REG0_THS_SETTLE_SHIFT 0 +#define ISPCSIPHY_REG0_THS_SETTLE_MASK \ + (0xff << ISPCSIPHY_REG0_THS_SETTLE_SHIFT) + +#define ISPCSIPHY_REG1 (0x004) +#define ISPCSIPHY_REG1_RESET_DONE_CTRLCLK (1 << 29) +/* This field is for OMAP3630 only */ +#define ISPCSIPHY_REG1_CLOCK_MISS_DETECTOR_STATUS (1 << 25) +#define ISPCSIPHY_REG1_TCLK_TERM_SHIFT 18 +#define ISPCSIPHY_REG1_TCLK_TERM_MASK \ + (0x7f << ISPCSIPHY_REG1_TCLK_TERM_SHIFT) +#define ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN_SHIFT 10 +#define ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN_MASK \ + (0xff << ISPCSIPHY_REG1_DPHY_HS_SYNC_PATTERN) +/* This field is for OMAP3430 only */ +#define ISPCSIPHY_REG1_TCLK_MISS_SHIFT 8 +#define ISPCSIPHY_REG1_TCLK_MISS_MASK \ + (0x3 << ISPCSIPHY_REG1_TCLK_MISS_SHIFT) +/* This field is for OMAP3630 only */ +#define ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT 8 +#define ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_MASK \ + (0x3 << ISPCSIPHY_REG1_CTRLCLK_DIV_FACTOR_SHIFT) +#define ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT 0 +#define ISPCSIPHY_REG1_TCLK_SETTLE_MASK \ + (0xff << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT) + +/* This register is for OMAP3630 only */ +#define ISPCSIPHY_REG2 (0x008) +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_SHIFT 30 +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_MASK \ + (0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC0_SHIFT) +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_SHIFT 28 +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_MASK \ + (0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC1_SHIFT) +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_SHIFT 26 +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_MASK \ + (0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC2_SHIFT) +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_SHIFT 24 +#define ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_MASK \ + (0x3 << ISPCSIPHY_REG2_TRIGGER_CMD_RXTRIGESC3_SHIFT) +#define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT 0 +#define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_MASK \ + (0x7fffff << ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT) + +#endif /* OMAP3_ISP_REG_H */ diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c new file mode 100644 index 000000000000..75d39b115d42 --- /dev/null +++ b/drivers/media/video/omap3isp/ispresizer.c @@ -0,0 +1,1693 @@ +/* + * ispresizer.c + * + * TI OMAP3 ISP - Resizer module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/module.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispresizer.h" + +/* + * Resizer Constants + */ +#define MIN_RESIZE_VALUE 64 +#define MID_RESIZE_VALUE 512 +#define MAX_RESIZE_VALUE 1024 + +#define MIN_IN_WIDTH 32 +#define MIN_IN_HEIGHT 32 +#define MAX_IN_WIDTH_MEMORY_MODE 4095 +#define MAX_IN_WIDTH_ONTHEFLY_MODE_ES1 1280 +#define MAX_IN_WIDTH_ONTHEFLY_MODE_ES2 4095 +#define MAX_IN_HEIGHT 4095 + +#define MIN_OUT_WIDTH 16 +#define MIN_OUT_HEIGHT 2 +#define MAX_OUT_HEIGHT 4095 + +/* + * Resizer Use Constraints + * "TRM ES3.1, table 12-46" + */ +#define MAX_4TAP_OUT_WIDTH_ES1 1280 +#define MAX_7TAP_OUT_WIDTH_ES1 640 +#define MAX_4TAP_OUT_WIDTH_ES2 3312 +#define MAX_7TAP_OUT_WIDTH_ES2 1650 +#define MAX_4TAP_OUT_WIDTH_3630 4096 +#define MAX_7TAP_OUT_WIDTH_3630 2048 + +/* + * Constants for ratio calculation + */ +#define RESIZE_DIVISOR 256 +#define DEFAULT_PHASE 1 + +/* + * Default (and only) configuration of filter coefficients. + * 7-tap mode is for scale factors 0.25x to 0.5x. + * 4-tap mode is for scale factors 0.5x to 4.0x. + * There shouldn't be any reason to recalculate these, EVER. + */ +static const struct isprsz_coef filter_coefs = { + /* For 8-phase 4-tap horizontal filter: */ + { + 0x0000, 0x0100, 0x0000, 0x0000, + 0x03FA, 0x00F6, 0x0010, 0x0000, + 0x03F9, 0x00DB, 0x002C, 0x0000, + 0x03FB, 0x00B3, 0x0053, 0x03FF, + 0x03FD, 0x0082, 0x0084, 0x03FD, + 0x03FF, 0x0053, 0x00B3, 0x03FB, + 0x0000, 0x002C, 0x00DB, 0x03F9, + 0x0000, 0x0010, 0x00F6, 0x03FA + }, + /* For 8-phase 4-tap vertical filter: */ + { + 0x0000, 0x0100, 0x0000, 0x0000, + 0x03FA, 0x00F6, 0x0010, 0x0000, + 0x03F9, 0x00DB, 0x002C, 0x0000, + 0x03FB, 0x00B3, 0x0053, 0x03FF, + 0x03FD, 0x0082, 0x0084, 0x03FD, + 0x03FF, 0x0053, 0x00B3, 0x03FB, + 0x0000, 0x002C, 0x00DB, 0x03F9, + 0x0000, 0x0010, 0x00F6, 0x03FA + }, + /* For 4-phase 7-tap horizontal filter: */ + #define DUMMY 0 + { + 0x0004, 0x0023, 0x005A, 0x0058, 0x0023, 0x0004, 0x0000, DUMMY, + 0x0002, 0x0018, 0x004d, 0x0060, 0x0031, 0x0008, 0x0000, DUMMY, + 0x0001, 0x000f, 0x003f, 0x0062, 0x003f, 0x000f, 0x0001, DUMMY, + 0x0000, 0x0008, 0x0031, 0x0060, 0x004d, 0x0018, 0x0002, DUMMY + }, + /* For 4-phase 7-tap vertical filter: */ + { + 0x0004, 0x0023, 0x005A, 0x0058, 0x0023, 0x0004, 0x0000, DUMMY, + 0x0002, 0x0018, 0x004d, 0x0060, 0x0031, 0x0008, 0x0000, DUMMY, + 0x0001, 0x000f, 0x003f, 0x0062, 0x003f, 0x000f, 0x0001, DUMMY, + 0x0000, 0x0008, 0x0031, 0x0060, 0x004d, 0x0018, 0x0002, DUMMY + } + /* + * The dummy padding is required in 7-tap mode because of how the + * registers are arranged physically. + */ + #undef DUMMY +}; + +/* + * __resizer_get_format - helper function for getting resizer format + * @res : pointer to resizer private structure + * @pad : pad number + * @fh : V4L2 subdev file handle + * @which : wanted subdev format + * return zero + */ +static struct v4l2_mbus_framefmt * +__resizer_get_format(struct isp_res_device *res, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &res->formats[pad]; +} + +/* + * __resizer_get_crop - helper function for getting resizer crop rectangle + * @res : pointer to resizer private structure + * @fh : V4L2 subdev file handle + * @which : wanted subdev crop rectangle + */ +static struct v4l2_rect * +__resizer_get_crop(struct isp_res_device *res, struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_crop(fh, RESZ_PAD_SINK); + else + return &res->crop.request; +} + +/* + * resizer_set_filters - Set resizer filters + * @res: Device context. + * @h_coeff: horizontal coefficient + * @v_coeff: vertical coefficient + * Return none + */ +static void resizer_set_filters(struct isp_res_device *res, const u16 *h_coeff, + const u16 *v_coeff) +{ + struct isp_device *isp = to_isp_device(res); + u32 startaddr_h, startaddr_v, tmp_h, tmp_v; + int i; + + startaddr_h = ISPRSZ_HFILT10; + startaddr_v = ISPRSZ_VFILT10; + + for (i = 0; i < COEFF_CNT; i += 2) { + tmp_h = h_coeff[i] | + (h_coeff[i + 1] << ISPRSZ_HFILT_COEF1_SHIFT); + tmp_v = v_coeff[i] | + (v_coeff[i + 1] << ISPRSZ_VFILT_COEF1_SHIFT); + isp_reg_writel(isp, tmp_h, OMAP3_ISP_IOMEM_RESZ, startaddr_h); + isp_reg_writel(isp, tmp_v, OMAP3_ISP_IOMEM_RESZ, startaddr_v); + startaddr_h += 4; + startaddr_v += 4; + } +} + +/* + * resizer_set_bilinear - Chrominance horizontal algorithm select + * @res: Device context. + * @type: Filtering interpolation type. + * + * Filtering that is same as luminance processing is + * intended only for downsampling, and bilinear interpolation + * is intended only for upsampling. + */ +static void resizer_set_bilinear(struct isp_res_device *res, + enum resizer_chroma_algo type) +{ + struct isp_device *isp = to_isp_device(res); + + if (type == RSZ_BILINEAR) + isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_CBILIN); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_CBILIN); +} + +/* + * resizer_set_ycpos - Luminance and chrominance order + * @res: Device context. + * @order: order type. + */ +static void resizer_set_ycpos(struct isp_res_device *res, + enum v4l2_mbus_pixelcode pixelcode) +{ + struct isp_device *isp = to_isp_device(res); + + switch (pixelcode) { + case V4L2_MBUS_FMT_YUYV8_1X16: + isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_YCPOS); + break; + case V4L2_MBUS_FMT_UYVY8_1X16: + isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_YCPOS); + break; + default: + return; + } +} + +/* + * resizer_set_phase - Setup horizontal and vertical starting phase + * @res: Device context. + * @h_phase: horizontal phase parameters. + * @v_phase: vertical phase parameters. + * + * Horizontal and vertical phase range is 0 to 7 + */ +static void resizer_set_phase(struct isp_res_device *res, u32 h_phase, + u32 v_phase) +{ + struct isp_device *isp = to_isp_device(res); + u32 rgval = 0; + + rgval = isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) & + ~(ISPRSZ_CNT_HSTPH_MASK | ISPRSZ_CNT_VSTPH_MASK); + rgval |= (h_phase << ISPRSZ_CNT_HSTPH_SHIFT) & ISPRSZ_CNT_HSTPH_MASK; + rgval |= (v_phase << ISPRSZ_CNT_VSTPH_SHIFT) & ISPRSZ_CNT_VSTPH_MASK; + + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT); +} + +/* + * resizer_set_luma - Setup luminance enhancer parameters + * @res: Device context. + * @luma: Structure for luminance enhancer parameters. + * + * Algorithm select: + * 0x0: Disable + * 0x1: [-1 2 -1]/2 high-pass filter + * 0x2: [-1 -2 6 -2 -1]/4 high-pass filter + * + * Maximum gain: + * The data is coded in U4Q4 representation. + * + * Slope: + * The data is coded in U4Q4 representation. + * + * Coring offset: + * The data is coded in U8Q0 representation. + * + * The new luminance value is computed as: + * Y += HPF(Y) x max(GAIN, (HPF(Y) - CORE) x SLOP + 8) >> 4. + */ +static void resizer_set_luma(struct isp_res_device *res, + struct resizer_luma_yenh *luma) +{ + struct isp_device *isp = to_isp_device(res); + u32 rgval = 0; + + rgval = (luma->algo << ISPRSZ_YENH_ALGO_SHIFT) + & ISPRSZ_YENH_ALGO_MASK; + rgval |= (luma->gain << ISPRSZ_YENH_GAIN_SHIFT) + & ISPRSZ_YENH_GAIN_MASK; + rgval |= (luma->slope << ISPRSZ_YENH_SLOP_SHIFT) + & ISPRSZ_YENH_SLOP_MASK; + rgval |= (luma->core << ISPRSZ_YENH_CORE_SHIFT) + & ISPRSZ_YENH_CORE_MASK; + + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_YENH); +} + +/* + * resizer_set_source - Input source select + * @res: Device context. + * @source: Input source type + * + * If this field is set to RESIZER_INPUT_VP, the resizer input is fed from + * Preview/CCDC engine, otherwise from memory. + */ +static void resizer_set_source(struct isp_res_device *res, + enum resizer_input_entity source) +{ + struct isp_device *isp = to_isp_device(res); + + if (source == RESIZER_INPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_INPSRC); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_INPSRC); +} + +/* + * resizer_set_ratio - Setup horizontal and vertical resizing value + * @res: Device context. + * @ratio: Structure for ratio parameters. + * + * Resizing range from 64 to 1024 + */ +static void resizer_set_ratio(struct isp_res_device *res, + const struct resizer_ratio *ratio) +{ + struct isp_device *isp = to_isp_device(res); + const u16 *h_filter, *v_filter; + u32 rgval = 0; + + rgval = isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) & + ~(ISPRSZ_CNT_HRSZ_MASK | ISPRSZ_CNT_VRSZ_MASK); + rgval |= ((ratio->horz - 1) << ISPRSZ_CNT_HRSZ_SHIFT) + & ISPRSZ_CNT_HRSZ_MASK; + rgval |= ((ratio->vert - 1) << ISPRSZ_CNT_VRSZ_SHIFT) + & ISPRSZ_CNT_VRSZ_MASK; + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT); + + /* prepare horizontal filter coefficients */ + if (ratio->horz > MID_RESIZE_VALUE) + h_filter = &filter_coefs.h_filter_coef_7tap[0]; + else + h_filter = &filter_coefs.h_filter_coef_4tap[0]; + + /* prepare vertical filter coefficients */ + if (ratio->vert > MID_RESIZE_VALUE) + v_filter = &filter_coefs.v_filter_coef_7tap[0]; + else + v_filter = &filter_coefs.v_filter_coef_4tap[0]; + + resizer_set_filters(res, h_filter, v_filter); +} + +/* + * resizer_set_dst_size - Setup the output height and width + * @res: Device context. + * @width: Output width. + * @height: Output height. + * + * Width : + * The value must be EVEN. + * + * Height: + * The number of bytes written to SDRAM must be + * a multiple of 16-bytes if the vertical resizing factor + * is greater than 1x (upsizing) + */ +static void resizer_set_output_size(struct isp_res_device *res, + u32 width, u32 height) +{ + struct isp_device *isp = to_isp_device(res); + u32 rgval = 0; + + dev_dbg(isp->dev, "Output size[w/h]: %dx%d\n", width, height); + rgval = (width << ISPRSZ_OUT_SIZE_HORZ_SHIFT) + & ISPRSZ_OUT_SIZE_HORZ_MASK; + rgval |= (height << ISPRSZ_OUT_SIZE_VERT_SHIFT) + & ISPRSZ_OUT_SIZE_VERT_MASK; + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_OUT_SIZE); +} + +/* + * resizer_set_output_offset - Setup memory offset for the output lines. + * @res: Device context. + * @offset: Memory offset. + * + * The 5 LSBs are forced to be zeros by the hardware to align on a 32-byte + * boundary; the 5 LSBs are read-only. For optimal use of SDRAM bandwidth, + * the SDRAM line offset must be set on a 256-byte boundary + */ +static void resizer_set_output_offset(struct isp_res_device *res, u32 offset) +{ + struct isp_device *isp = to_isp_device(res); + + isp_reg_writel(isp, offset, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTOFF); +} + +/* + * resizer_set_start - Setup vertical and horizontal start position + * @res: Device context. + * @left: Horizontal start position. + * @top: Vertical start position. + * + * Vertical start line: + * This field makes sense only when the resizer obtains its input + * from the preview engine/CCDC + * + * Horizontal start pixel: + * Pixels are coded on 16 bits for YUV and 8 bits for color separate data. + * When the resizer gets its input from SDRAM, this field must be set + * to <= 15 for YUV 16-bit data and <= 31 for 8-bit color separate data + */ +static void resizer_set_start(struct isp_res_device *res, u32 left, u32 top) +{ + struct isp_device *isp = to_isp_device(res); + u32 rgval = 0; + + rgval = (left << ISPRSZ_IN_START_HORZ_ST_SHIFT) + & ISPRSZ_IN_START_HORZ_ST_MASK; + rgval |= (top << ISPRSZ_IN_START_VERT_ST_SHIFT) + & ISPRSZ_IN_START_VERT_ST_MASK; + + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_START); +} + +/* + * resizer_set_input_size - Setup the input size + * @res: Device context. + * @width: The range is 0 to 4095 pixels + * @height: The range is 0 to 4095 lines + */ +static void resizer_set_input_size(struct isp_res_device *res, + u32 width, u32 height) +{ + struct isp_device *isp = to_isp_device(res); + u32 rgval = 0; + + dev_dbg(isp->dev, "Input size[w/h]: %dx%d\n", width, height); + + rgval = (width << ISPRSZ_IN_SIZE_HORZ_SHIFT) + & ISPRSZ_IN_SIZE_HORZ_MASK; + rgval |= (height << ISPRSZ_IN_SIZE_VERT_SHIFT) + & ISPRSZ_IN_SIZE_VERT_MASK; + + isp_reg_writel(isp, rgval, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_SIZE); +} + +/* + * resizer_set_src_offs - Setup the memory offset for the input lines + * @res: Device context. + * @offset: Memory offset. + * + * The 5 LSBs are forced to be zeros by the hardware to align on a 32-byte + * boundary; the 5 LSBs are read-only. This field must be programmed to be + * 0x0 if the resizer input is from preview engine/CCDC. + */ +static void resizer_set_input_offset(struct isp_res_device *res, u32 offset) +{ + struct isp_device *isp = to_isp_device(res); + + isp_reg_writel(isp, offset, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INOFF); +} + +/* + * resizer_set_intype - Input type select + * @res: Device context. + * @type: Pixel format type. + */ +static void resizer_set_intype(struct isp_res_device *res, + enum resizer_colors_type type) +{ + struct isp_device *isp = to_isp_device(res); + + if (type == RSZ_COLOR8) + isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_INPTYP); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, + ISPRSZ_CNT_INPTYP); +} + +/* + * __resizer_set_inaddr - Helper function for set input address + * @res : pointer to resizer private data structure + * @addr: input address + * return none + */ +static void __resizer_set_inaddr(struct isp_res_device *res, u32 addr) +{ + struct isp_device *isp = to_isp_device(res); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD); +} + +/* + * The data rate at the horizontal resizer output must not exceed half the + * functional clock or 100 MP/s, whichever is lower. According to the TRM + * there's no similar requirement for the vertical resizer output. However + * experience showed that vertical upscaling by 4 leads to SBL overflows (with + * data rates at the resizer output exceeding 300 MP/s). Limiting the resizer + * output data rate to the functional clock or 200 MP/s, whichever is lower, + * seems to get rid of SBL overflows. + * + * The maximum data rate at the output of the horizontal resizer can thus be + * computed with + * + * max intermediate rate <= L3 clock * input height / output height + * max intermediate rate <= L3 clock / 2 + * + * The maximum data rate at the resizer input is then + * + * max input rate <= max intermediate rate * input width / output width + * + * where the input width and height are the resizer input crop rectangle size. + * The TRM doesn't clearly explain if that's a maximum instant data rate or a + * maximum average data rate. + */ +void omap3isp_resizer_max_rate(struct isp_res_device *res, + unsigned int *max_rate) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity); + const struct v4l2_mbus_framefmt *ofmt = &res->formats[RESZ_PAD_SOURCE]; + unsigned long limit = min(pipe->l3_ick, 200000000UL); + unsigned long clock; + + clock = div_u64((u64)limit * res->crop.active.height, ofmt->height); + clock = min(clock, limit / 2); + *max_rate = div_u64((u64)clock * res->crop.active.width, ofmt->width); +} + +/* + * When the resizer processes images from memory, the driver must slow down read + * requests on the input to at least comply with the internal data rate + * requirements. If the application real-time requirements can cope with slower + * processing, the resizer can be slowed down even more to put less pressure on + * the overall system. + * + * When the resizer processes images on the fly (either from the CCDC or the + * preview module), the same data rate requirements apply but they can't be + * enforced at the resizer level. The image input module (sensor, CCP2 or + * preview module) must not provide image data faster than the resizer can + * process. + * + * For live image pipelines, the data rate is set by the frame format, size and + * rate. The sensor output frame rate must not exceed the maximum resizer data + * rate. + * + * The resizer slows down read requests by inserting wait cycles in the SBL + * requests. The maximum number of 256-byte requests per second can be computed + * as (the data rate is multiplied by 2 to convert from pixels per second to + * bytes per second) + * + * request per second = data rate * 2 / 256 + * cycles per request = cycles per second / requests per second + * + * The number of cycles per second is controlled by the L3 clock, leading to + * + * cycles per request = L3 frequency / 2 * 256 / data rate + */ +static void resizer_adjust_bandwidth(struct isp_res_device *res) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity); + struct isp_device *isp = to_isp_device(res); + unsigned long l3_ick = pipe->l3_ick; + struct v4l2_fract *timeperframe; + unsigned int cycles_per_frame; + unsigned int requests_per_frame; + unsigned int cycles_per_request; + unsigned int granularity; + unsigned int minimum; + unsigned int maximum; + unsigned int value; + + if (res->input != RESIZER_INPUT_MEMORY) { + isp_reg_clr(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_RSZ_EXP_MASK); + return; + } + + switch (isp->revision) { + case ISP_REVISION_1_0: + case ISP_REVISION_2_0: + default: + granularity = 1024; + break; + + case ISP_REVISION_15_0: + granularity = 32; + break; + } + + /* Compute the minimum number of cycles per request, based on the + * pipeline maximum data rate. This is an absolute lower bound if we + * don't want SBL overflows, so round the value up. + */ + cycles_per_request = div_u64((u64)l3_ick / 2 * 256 + pipe->max_rate - 1, + pipe->max_rate); + minimum = DIV_ROUND_UP(cycles_per_request, granularity); + + /* Compute the maximum number of cycles per request, based on the + * requested frame rate. This is a soft upper bound to achieve a frame + * rate equal or higher than the requested value, so round the value + * down. + */ + timeperframe = &pipe->max_timeperframe; + + requests_per_frame = DIV_ROUND_UP(res->crop.active.width * 2, 256) + * res->crop.active.height; + cycles_per_frame = div_u64((u64)l3_ick * timeperframe->numerator, + timeperframe->denominator); + cycles_per_request = cycles_per_frame / requests_per_frame; + + maximum = cycles_per_request / granularity; + + value = max(minimum, maximum); + + dev_dbg(isp->dev, "%s: cycles per request = %u\n", __func__, value); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_SDR_REQ_EXP, + ISPSBL_SDR_REQ_RSZ_EXP_MASK, + value << ISPSBL_SDR_REQ_RSZ_EXP_SHIFT); +} + +/* + * omap3isp_resizer_busy - Checks if ISP resizer is busy. + * + * Returns busy field from ISPRSZ_PCR register. + */ +int omap3isp_resizer_busy(struct isp_res_device *res) +{ + struct isp_device *isp = to_isp_device(res); + + return isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR) & + ISPRSZ_PCR_BUSY; +} + +/* + * resizer_set_inaddr - Sets the memory address of the input frame. + * @addr: 32bit memory address aligned on 32byte boundary. + */ +static void resizer_set_inaddr(struct isp_res_device *res, u32 addr) +{ + res->addr_base = addr; + + /* This will handle crop settings in stream off state */ + if (res->crop_offset) + addr += res->crop_offset & ~0x1f; + + __resizer_set_inaddr(res, addr); +} + +/* + * Configures the memory address to which the output frame is written. + * @addr: 32bit memory address aligned on 32byte boundary. + * Note: For SBL efficiency reasons the address should be on a 256-byte + * boundary. + */ +static void resizer_set_outaddr(struct isp_res_device *res, u32 addr) +{ + struct isp_device *isp = to_isp_device(res); + + /* + * Set output address. This needs to be in its own function + * because it changes often. + */ + isp_reg_writel(isp, addr << ISPRSZ_SDR_OUTADD_ADDR_SHIFT, + OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTADD); +} + +/* + * resizer_print_status - Prints the values of the resizer module registers. + */ +#define RSZ_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###RSZ " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_##name)) + +static void resizer_print_status(struct isp_res_device *res) +{ + struct isp_device *isp = to_isp_device(res); + + dev_dbg(isp->dev, "-------------Resizer Register dump----------\n"); + + RSZ_PRINT_REGISTER(isp, PCR); + RSZ_PRINT_REGISTER(isp, CNT); + RSZ_PRINT_REGISTER(isp, OUT_SIZE); + RSZ_PRINT_REGISTER(isp, IN_START); + RSZ_PRINT_REGISTER(isp, IN_SIZE); + RSZ_PRINT_REGISTER(isp, SDR_INADD); + RSZ_PRINT_REGISTER(isp, SDR_INOFF); + RSZ_PRINT_REGISTER(isp, SDR_OUTADD); + RSZ_PRINT_REGISTER(isp, SDR_OUTOFF); + RSZ_PRINT_REGISTER(isp, YENH); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * resizer_calc_ratios - Helper function for calculate resizer ratios + * @res: pointer to resizer private data structure + * @input: input frame size + * @output: output frame size + * @ratio : return calculated ratios + * return none + * + * The resizer uses a polyphase sample rate converter. The upsampling filter + * has a fixed number of phases that depend on the resizing ratio. As the ratio + * computation depends on the number of phases, we need to compute a first + * approximation and then refine it. + * + * The input/output/ratio relationship is given by the OMAP34xx TRM: + * + * - 8-phase, 4-tap mode (RSZ = 64 ~ 512) + * iw = (32 * sph + (ow - 1) * hrsz + 16) >> 8 + 7 + * ih = (32 * spv + (oh - 1) * vrsz + 16) >> 8 + 4 + * - 4-phase, 7-tap mode (RSZ = 513 ~ 1024) + * iw = (64 * sph + (ow - 1) * hrsz + 32) >> 8 + 7 + * ih = (64 * spv + (oh - 1) * vrsz + 32) >> 8 + 7 + * + * iw and ih are the input width and height after cropping. Those equations need + * to be satisfied exactly for the resizer to work correctly. + * + * Reverting the equations, we can compute the resizing ratios with + * + * - 8-phase, 4-tap mode + * hrsz = ((iw - 7) * 256 - 16 - 32 * sph) / (ow - 1) + * vrsz = ((ih - 4) * 256 - 16 - 32 * spv) / (oh - 1) + * - 4-phase, 7-tap mode + * hrsz = ((iw - 7) * 256 - 32 - 64 * sph) / (ow - 1) + * vrsz = ((ih - 7) * 256 - 32 - 64 * spv) / (oh - 1) + * + * The ratios are integer values, and must be rounded down to ensure that the + * cropped input size is not bigger than the uncropped input size. As the ratio + * in 7-tap mode is always smaller than the ratio in 4-tap mode, we can use the + * 7-tap mode equations to compute a ratio approximation. + * + * We first clamp the output size according to the hardware capabilitie to avoid + * auto-cropping the input more than required to satisfy the TRM equations. The + * minimum output size is achieved with a scaling factor of 1024. It is thus + * computed using the 7-tap equations. + * + * min ow = ((iw - 7) * 256 - 32 - 64 * sph) / 1024 + 1 + * min oh = ((ih - 7) * 256 - 32 - 64 * spv) / 1024 + 1 + * + * Similarly, the maximum output size is achieved with a scaling factor of 64 + * and computed using the 4-tap equations. + * + * max ow = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / 64 + 1 + * max oh = ((ih - 4) * 256 + 255 - 16 - 32 * spv) / 64 + 1 + * + * The additional +255 term compensates for the round down operation performed + * by the TRM equations when shifting the value right by 8 bits. + * + * We then compute and clamp the ratios (x1/4 ~ x4). Clamping the output size to + * the maximum value guarantees that the ratio value will never be smaller than + * the minimum, but it could still slightly exceed the maximum. Clamping the + * ratio will thus result in a resizing factor slightly larger than the + * requested value. + * + * To accomodate that, and make sure the TRM equations are satisfied exactly, we + * compute the input crop rectangle as the last step. + * + * As if the situation wasn't complex enough, the maximum output width depends + * on the vertical resizing ratio. Fortunately, the output height doesn't + * depend on the horizontal resizing ratio. We can then start by computing the + * output height and the vertical ratio, and then move to computing the output + * width and the horizontal ratio. + */ +static void resizer_calc_ratios(struct isp_res_device *res, + struct v4l2_rect *input, + struct v4l2_mbus_framefmt *output, + struct resizer_ratio *ratio) +{ + struct isp_device *isp = to_isp_device(res); + const unsigned int spv = DEFAULT_PHASE; + const unsigned int sph = DEFAULT_PHASE; + unsigned int upscaled_width; + unsigned int upscaled_height; + unsigned int min_width; + unsigned int min_height; + unsigned int max_width; + unsigned int max_height; + unsigned int width_alignment; + + /* + * Clamp the output height based on the hardware capabilities and + * compute the vertical resizing ratio. + */ + min_height = ((input->height - 7) * 256 - 32 - 64 * spv) / 1024 + 1; + min_height = max_t(unsigned int, min_height, MIN_OUT_HEIGHT); + max_height = ((input->height - 4) * 256 + 255 - 16 - 32 * spv) / 64 + 1; + max_height = min_t(unsigned int, max_height, MAX_OUT_HEIGHT); + output->height = clamp(output->height, min_height, max_height); + + ratio->vert = ((input->height - 7) * 256 - 32 - 64 * spv) + / (output->height - 1); + ratio->vert = clamp_t(unsigned int, ratio->vert, + MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); + + if (ratio->vert <= MID_RESIZE_VALUE) { + upscaled_height = (output->height - 1) * ratio->vert + + 32 * spv + 16; + input->height = (upscaled_height >> 8) + 4; + } else { + upscaled_height = (output->height - 1) * ratio->vert + + 64 * spv + 32; + input->height = (upscaled_height >> 8) + 7; + } + + /* + * Compute the minimum and maximum output widths based on the hardware + * capabilities. The maximum depends on the vertical resizing ratio. + */ + min_width = ((input->width - 7) * 256 - 32 - 64 * sph) / 1024 + 1; + min_width = max_t(unsigned int, min_width, MIN_OUT_WIDTH); + + if (ratio->vert <= MID_RESIZE_VALUE) { + switch (isp->revision) { + case ISP_REVISION_1_0: + max_width = MAX_4TAP_OUT_WIDTH_ES1; + break; + + case ISP_REVISION_2_0: + default: + max_width = MAX_4TAP_OUT_WIDTH_ES2; + break; + + case ISP_REVISION_15_0: + max_width = MAX_4TAP_OUT_WIDTH_3630; + break; + } + } else { + switch (isp->revision) { + case ISP_REVISION_1_0: + max_width = MAX_7TAP_OUT_WIDTH_ES1; + break; + + case ISP_REVISION_2_0: + default: + max_width = MAX_7TAP_OUT_WIDTH_ES2; + break; + + case ISP_REVISION_15_0: + max_width = MAX_7TAP_OUT_WIDTH_3630; + break; + } + } + max_width = min(((input->width - 7) * 256 + 255 - 16 - 32 * sph) / 64 + + 1, max_width); + + /* + * The output width must be even, and must be a multiple of 16 bytes + * when upscaling vertically. Clamp the output width to the valid range. + * Take the alignment into account (the maximum width in 7-tap mode on + * ES2 isn't a multiple of 8) and align the result up to make sure it + * won't be smaller than the minimum. + */ + width_alignment = ratio->vert < 256 ? 8 : 2; + output->width = clamp(output->width, min_width, + max_width & ~(width_alignment - 1)); + output->width = ALIGN(output->width, width_alignment); + + ratio->horz = ((input->width - 7) * 256 - 32 - 64 * sph) + / (output->width - 1); + ratio->horz = clamp_t(unsigned int, ratio->horz, + MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); + + if (ratio->horz <= MID_RESIZE_VALUE) { + upscaled_width = (output->width - 1) * ratio->horz + + 32 * sph + 16; + input->width = (upscaled_width >> 8) + 7; + } else { + upscaled_width = (output->width - 1) * ratio->horz + + 64 * sph + 32; + input->width = (upscaled_width >> 8) + 7; + } +} + +/* + * resizer_set_crop_params - Setup hardware with cropping parameters + * @res : resizer private structure + * @crop_rect : current crop rectangle + * @ratio : resizer ratios + * return none + */ +static void resizer_set_crop_params(struct isp_res_device *res, + const struct v4l2_mbus_framefmt *input, + const struct v4l2_mbus_framefmt *output) +{ + resizer_set_ratio(res, &res->ratio); + + /* Set chrominance horizontal algorithm */ + if (res->ratio.horz >= RESIZE_DIVISOR) + resizer_set_bilinear(res, RSZ_THE_SAME); + else + resizer_set_bilinear(res, RSZ_BILINEAR); + + resizer_adjust_bandwidth(res); + + if (res->input == RESIZER_INPUT_MEMORY) { + /* Calculate additional offset for crop */ + res->crop_offset = (res->crop.active.top * input->width + + res->crop.active.left) * 2; + /* + * Write lowest 4 bits of horizontal pixel offset (in pixels), + * vertical start must be 0. + */ + resizer_set_start(res, (res->crop_offset / 2) & 0xf, 0); + + /* + * Set start (read) address for cropping, in bytes. + * Lowest 5 bits must be zero. + */ + __resizer_set_inaddr(res, + res->addr_base + (res->crop_offset & ~0x1f)); + } else { + /* + * Set vertical start line and horizontal starting pixel. + * If the input is from CCDC/PREV, horizontal start field is + * in bytes (twice number of pixels). + */ + resizer_set_start(res, res->crop.active.left * 2, + res->crop.active.top); + /* Input address and offset must be 0 for preview/ccdc input */ + __resizer_set_inaddr(res, 0); + resizer_set_input_offset(res, 0); + } + + /* Set the input size */ + resizer_set_input_size(res, res->crop.active.width, + res->crop.active.height); +} + +static void resizer_configure(struct isp_res_device *res) +{ + struct v4l2_mbus_framefmt *informat, *outformat; + struct resizer_luma_yenh luma = {0, 0, 0, 0}; + + resizer_set_source(res, res->input); + + informat = &res->formats[RESZ_PAD_SINK]; + outformat = &res->formats[RESZ_PAD_SOURCE]; + + /* RESZ_PAD_SINK */ + if (res->input == RESIZER_INPUT_VP) + resizer_set_input_offset(res, 0); + else + resizer_set_input_offset(res, ALIGN(informat->width, 0x10) * 2); + + /* YUV422 interleaved, default phase, no luma enhancement */ + resizer_set_intype(res, RSZ_YUV422); + resizer_set_ycpos(res, informat->code); + resizer_set_phase(res, DEFAULT_PHASE, DEFAULT_PHASE); + resizer_set_luma(res, &luma); + + /* RESZ_PAD_SOURCE */ + resizer_set_output_offset(res, ALIGN(outformat->width * 2, 32)); + resizer_set_output_size(res, outformat->width, outformat->height); + + resizer_set_crop_params(res, informat, outformat); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +static void resizer_enable_oneshot(struct isp_res_device *res) +{ + struct isp_device *isp = to_isp_device(res); + + isp_reg_set(isp, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR, + ISPRSZ_PCR_ENABLE | ISPRSZ_PCR_ONESHOT); +} + +void omap3isp_resizer_isr_frame_sync(struct isp_res_device *res) +{ + /* + * If ISP_VIDEO_DMAQUEUE_QUEUED is set, DMA queue had an underrun + * condition, the module was paused and now we have a buffer queued + * on the output again. Restart the pipeline if running in continuous + * mode. + */ + if (res->state == ISP_PIPELINE_STREAM_CONTINUOUS && + res->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) { + resizer_enable_oneshot(res); + isp_video_dmaqueue_flags_clr(&res->video_out); + } +} + +static void resizer_isr_buffer(struct isp_res_device *res) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&res->subdev.entity); + struct isp_buffer *buffer; + int restart = 0; + + if (res->state == ISP_PIPELINE_STREAM_STOPPED) + return; + + /* Complete the output buffer and, if reading from memory, the input + * buffer. + */ + buffer = omap3isp_video_buffer_next(&res->video_out, res->error); + if (buffer != NULL) { + resizer_set_outaddr(res, buffer->isp_addr); + restart = 1; + } + + pipe->state |= ISP_PIPELINE_IDLE_OUTPUT; + + if (res->input == RESIZER_INPUT_MEMORY) { + buffer = omap3isp_video_buffer_next(&res->video_in, 0); + if (buffer != NULL) + resizer_set_inaddr(res, buffer->isp_addr); + pipe->state |= ISP_PIPELINE_IDLE_INPUT; + } + + if (res->state == ISP_PIPELINE_STREAM_SINGLESHOT) { + if (isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + } else { + /* If an underrun occurs, the video queue operation handler will + * restart the resizer. Otherwise restart it immediately. + */ + if (restart) + resizer_enable_oneshot(res); + } + + res->error = 0; +} + +/* + * omap3isp_resizer_isr - ISP resizer interrupt handler + * + * Manage the resizer video buffers and configure shadowed and busy-locked + * registers. + */ +void omap3isp_resizer_isr(struct isp_res_device *res) +{ + struct v4l2_mbus_framefmt *informat, *outformat; + + if (omap3isp_module_sync_is_stopping(&res->wait, &res->stopping)) + return; + + if (res->applycrop) { + outformat = __resizer_get_format(res, NULL, RESZ_PAD_SOURCE, + V4L2_SUBDEV_FORMAT_ACTIVE); + informat = __resizer_get_format(res, NULL, RESZ_PAD_SINK, + V4L2_SUBDEV_FORMAT_ACTIVE); + resizer_set_crop_params(res, informat, outformat); + res->applycrop = 0; + } + + resizer_isr_buffer(res); +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +static int resizer_video_queue(struct isp_video *video, + struct isp_buffer *buffer) +{ + struct isp_res_device *res = &video->isp->isp_res; + + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + resizer_set_inaddr(res, buffer->isp_addr); + + /* + * We now have a buffer queued on the output. Despite what the + * TRM says, the resizer can't be restarted immediately. + * Enabling it in one shot mode in the middle of a frame (or at + * least asynchronously to the frame) results in the output + * being shifted randomly left/right and up/down, as if the + * hardware didn't synchronize itself to the beginning of the + * frame correctly. + * + * Restart the resizer on the next sync interrupt if running in + * continuous mode or when starting the stream. + */ + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + resizer_set_outaddr(res, buffer->isp_addr); + + return 0; +} + +static const struct isp_video_operations resizer_video_ops = { + .queue = resizer_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +/* + * resizer_set_stream - Enable/Disable streaming on resizer subdev + * @sd: ISP resizer V4L2 subdev + * @enable: 1 == Enable, 0 == Disable + * + * The resizer hardware can't be enabled without a memory buffer to write to. + * As the s_stream operation is called in response to a STREAMON call without + * any buffer queued yet, just update the state field and return immediately. + * The resizer will be enabled in resizer_video_queue(). + */ +static int resizer_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct isp_video *video_out = &res->video_out; + struct isp_device *isp = to_isp_device(res); + struct device *dev = to_device(res); + + if (res->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + + omap3isp_subclk_enable(isp, OMAP3_ISP_SUBCLK_RESIZER); + resizer_configure(res); + res->error = 0; + resizer_print_status(res); + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_WRITE); + if (video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED) { + resizer_enable_oneshot(res); + isp_video_dmaqueue_flags_clr(video_out); + } + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (res->input == RESIZER_INPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_READ); + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_RESIZER_WRITE); + + resizer_enable_oneshot(res); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (omap3isp_module_sync_idle(&sd->entity, &res->wait, + &res->stopping)) + dev_dbg(dev, "%s: module stop timeout.\n", sd->name); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_RESIZER_READ | + OMAP3_ISP_SBL_RESIZER_WRITE); + omap3isp_subclk_disable(isp, OMAP3_ISP_SUBCLK_RESIZER); + isp_video_dmaqueue_flags_clr(video_out); + break; + } + + res->state = enable; + return 0; +} + +/* + * resizer_g_crop - handle get crop subdev operation + * @sd : pointer to v4l2 subdev structure + * @pad : subdev pad + * @crop : pointer to crop structure + * @which : active or try format + * return zero + */ +static int resizer_g_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + struct resizer_ratio ratio; + + /* Only sink pad has crop capability */ + if (crop->pad != RESZ_PAD_SINK) + return -EINVAL; + + format = __resizer_get_format(res, fh, RESZ_PAD_SOURCE, crop->which); + crop->rect = *__resizer_get_crop(res, fh, crop->which); + resizer_calc_ratios(res, &crop->rect, format, &ratio); + + return 0; +} + +/* + * resizer_try_crop - mangles crop parameters. + */ +static void resizer_try_crop(const struct v4l2_mbus_framefmt *sink, + const struct v4l2_mbus_framefmt *source, + struct v4l2_rect *crop) +{ + const unsigned int spv = DEFAULT_PHASE; + const unsigned int sph = DEFAULT_PHASE; + + /* Crop rectangle is constrained to the output size so that zoom ratio + * cannot exceed +/-4.0. + */ + unsigned int min_width = + ((32 * sph + (source->width - 1) * 64 + 16) >> 8) + 7; + unsigned int min_height = + ((32 * spv + (source->height - 1) * 64 + 16) >> 8) + 4; + unsigned int max_width = + ((64 * sph + (source->width - 1) * 1024 + 32) >> 8) + 7; + unsigned int max_height = + ((64 * spv + (source->height - 1) * 1024 + 32) >> 8) + 7; + + crop->width = clamp_t(u32, crop->width, min_width, max_width); + crop->height = clamp_t(u32, crop->height, min_height, max_height); + + /* Crop can not go beyond of the input rectangle */ + crop->left = clamp_t(u32, crop->left, 0, sink->width - MIN_IN_WIDTH); + crop->width = clamp_t(u32, crop->width, MIN_IN_WIDTH, + sink->width - crop->left); + crop->top = clamp_t(u32, crop->top, 0, sink->height - MIN_IN_HEIGHT); + crop->height = clamp_t(u32, crop->height, MIN_IN_HEIGHT, + sink->height - crop->top); +} + +/* + * resizer_s_crop - handle set crop subdev operation + * @sd : pointer to v4l2 subdev structure + * @pad : subdev pad + * @crop : pointer to crop structure + * @which : active or try format + * return -EINVAL or zero when succeed + */ +static int resizer_s_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct isp_device *isp = to_isp_device(res); + struct v4l2_mbus_framefmt *format_sink, *format_source; + struct resizer_ratio ratio; + + /* Only sink pad has crop capability */ + if (crop->pad != RESZ_PAD_SINK) + return -EINVAL; + + format_sink = __resizer_get_format(res, fh, RESZ_PAD_SINK, + crop->which); + format_source = __resizer_get_format(res, fh, RESZ_PAD_SOURCE, + crop->which); + + dev_dbg(isp->dev, "%s: L=%d,T=%d,W=%d,H=%d,which=%d\n", __func__, + crop->rect.left, crop->rect.top, crop->rect.width, + crop->rect.height, crop->which); + + dev_dbg(isp->dev, "%s: input=%dx%d, output=%dx%d\n", __func__, + format_sink->width, format_sink->height, + format_source->width, format_source->height); + + resizer_try_crop(format_sink, format_source, &crop->rect); + *__resizer_get_crop(res, fh, crop->which) = crop->rect; + resizer_calc_ratios(res, &crop->rect, format_source, &ratio); + + if (crop->which == V4L2_SUBDEV_FORMAT_TRY) + return 0; + + res->ratio = ratio; + res->crop.active = crop->rect; + + /* + * s_crop can be called while streaming is on. In this case + * the crop values will be set in the next IRQ. + */ + if (res->state != ISP_PIPELINE_STREAM_STOPPED) + res->applycrop = 1; + + return 0; +} + +/* resizer pixel formats */ +static const unsigned int resizer_formats[] = { + V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, +}; + +static unsigned int resizer_max_in_width(struct isp_res_device *res) +{ + struct isp_device *isp = to_isp_device(res); + + if (res->input == RESIZER_INPUT_MEMORY) { + return MAX_IN_WIDTH_MEMORY_MODE; + } else { + if (isp->revision == ISP_REVISION_1_0) + return MAX_IN_WIDTH_ONTHEFLY_MODE_ES1; + else + return MAX_IN_WIDTH_ONTHEFLY_MODE_ES2; + } +} + +/* + * resizer_try_format - Handle try format by pad subdev method + * @res : ISP resizer device + * @fh : V4L2 subdev file handle + * @pad : pad num + * @fmt : pointer to v4l2 format structure + * @which : wanted subdev format + */ +static void resizer_try_format(struct isp_res_device *res, + struct v4l2_subdev_fh *fh, unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + struct v4l2_mbus_framefmt *format; + struct resizer_ratio ratio; + struct v4l2_rect crop; + + switch (pad) { + case RESZ_PAD_SINK: + if (fmt->code != V4L2_MBUS_FMT_YUYV8_1X16 && + fmt->code != V4L2_MBUS_FMT_UYVY8_1X16) + fmt->code = V4L2_MBUS_FMT_YUYV8_1X16; + + fmt->width = clamp_t(u32, fmt->width, MIN_IN_WIDTH, + resizer_max_in_width(res)); + fmt->height = clamp_t(u32, fmt->height, MIN_IN_HEIGHT, + MAX_IN_HEIGHT); + break; + + case RESZ_PAD_SOURCE: + format = __resizer_get_format(res, fh, RESZ_PAD_SINK, which); + fmt->code = format->code; + + crop = *__resizer_get_crop(res, fh, which); + resizer_calc_ratios(res, &crop, fmt, &ratio); + break; + } + + fmt->colorspace = V4L2_COLORSPACE_JPEG; + fmt->field = V4L2_FIELD_NONE; +} + +/* + * resizer_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int resizer_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + if (code->pad == RESZ_PAD_SINK) { + if (code->index >= ARRAY_SIZE(resizer_formats)) + return -EINVAL; + + code->code = resizer_formats[code->index]; + } else { + if (code->index != 0) + return -EINVAL; + + format = __resizer_get_format(res, fh, RESZ_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + code->code = format->code; + } + + return 0; +} + +static int resizer_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + resizer_try_format(res, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + resizer_try_format(res, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * resizer_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __resizer_get_format(res, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * resizer_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int resizer_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_res_device *res = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + format = __resizer_get_format(res, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + resizer_try_format(res, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + if (fmt->pad == RESZ_PAD_SINK) { + /* reset crop rectangle */ + crop = __resizer_get_crop(res, fh, fmt->which); + crop->left = 0; + crop->top = 0; + crop->width = fmt->format.width; + crop->height = fmt->format.height; + + /* Propagate the format from sink to source */ + format = __resizer_get_format(res, fh, RESZ_PAD_SOURCE, + fmt->which); + *format = fmt->format; + resizer_try_format(res, fh, RESZ_PAD_SOURCE, format, + fmt->which); + } + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + /* Compute and store the active crop rectangle and resizer + * ratios. format already points to the source pad active + * format. + */ + res->crop.active = res->crop.request; + resizer_calc_ratios(res, &res->crop.active, format, + &res->ratio); + } + + return 0; +} + +/* + * resizer_init_formats - Initialize formats on all pads + * @sd: ISP resizer V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int resizer_init_formats(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = RESZ_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_YUYV8_1X16; + format.format.width = 4096; + format.format.height = 4096; + resizer_set_format(sd, fh, &format); + + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops resizer_v4l2_video_ops = { + .s_stream = resizer_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops resizer_v4l2_pad_ops = { + .enum_mbus_code = resizer_enum_mbus_code, + .enum_frame_size = resizer_enum_frame_size, + .get_fmt = resizer_get_format, + .set_fmt = resizer_set_format, + .get_crop = resizer_g_crop, + .set_crop = resizer_s_crop, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops resizer_v4l2_ops = { + .video = &resizer_v4l2_video_ops, + .pad = &resizer_v4l2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops resizer_v4l2_internal_ops = { + .open = resizer_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * resizer_link_setup - Setup resizer connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int resizer_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_res_device *res = v4l2_get_subdevdata(sd); + + switch (local->index | media_entity_type(remote->entity)) { + case RESZ_PAD_SINK | MEDIA_ENT_T_DEVNODE: + /* read from memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (res->input == RESIZER_INPUT_VP) + return -EBUSY; + res->input = RESIZER_INPUT_MEMORY; + } else { + if (res->input == RESIZER_INPUT_MEMORY) + res->input = RESIZER_INPUT_NONE; + } + break; + + case RESZ_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* read from ccdc or previewer */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (res->input == RESIZER_INPUT_MEMORY) + return -EBUSY; + res->input = RESIZER_INPUT_VP; + } else { + if (res->input == RESIZER_INPUT_VP) + res->input = RESIZER_INPUT_NONE; + } + break; + + case RESZ_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + /* resizer always write to memory */ + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations resizer_media_ops = { + .link_setup = resizer_link_setup, +}; + +/* + * resizer_init_entities - Initialize resizer subdev and media entity. + * @res : Pointer to resizer device structure + * return -ENOMEM or zero on success + */ +static int resizer_init_entities(struct isp_res_device *res) +{ + struct v4l2_subdev *sd = &res->subdev; + struct media_pad *pads = res->pads; + struct media_entity *me = &sd->entity; + int ret; + + res->input = RESIZER_INPUT_NONE; + + v4l2_subdev_init(sd, &resizer_v4l2_ops); + sd->internal_ops = &resizer_v4l2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP resizer", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, res); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[RESZ_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[RESZ_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &resizer_media_ops; + ret = media_entity_init(me, RESZ_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + resizer_init_formats(sd, NULL); + + res->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + res->video_in.ops = &resizer_video_ops; + res->video_in.isp = to_isp_device(res); + res->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + res->video_in.bpl_alignment = 32; + res->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + res->video_out.ops = &resizer_video_ops; + res->video_out.isp = to_isp_device(res); + res->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 2 * 3; + res->video_out.bpl_alignment = 32; + + ret = omap3isp_video_init(&res->video_in, "resizer"); + if (ret < 0) + return ret; + + ret = omap3isp_video_init(&res->video_out, "resizer"); + if (ret < 0) + return ret; + + /* Connect the video nodes to the resizer subdev. */ + ret = media_entity_create_link(&res->video_in.video.entity, 0, + &res->subdev.entity, RESZ_PAD_SINK, 0); + if (ret < 0) + return ret; + + ret = media_entity_create_link(&res->subdev.entity, RESZ_PAD_SOURCE, + &res->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap3isp_resizer_unregister_entities(struct isp_res_device *res) +{ + media_entity_cleanup(&res->subdev.entity); + + v4l2_device_unregister_subdev(&res->subdev); + omap3isp_video_unregister(&res->video_in); + omap3isp_video_unregister(&res->video_out); +} + +int omap3isp_resizer_register_entities(struct isp_res_device *res, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &res->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&res->video_in, vdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&res->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_resizer_unregister_entities(res); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP resizer initialization and cleanup + */ + +void omap3isp_resizer_cleanup(struct isp_device *isp) +{ +} + +/* + * isp_resizer_init - Resizer initialization. + * @isp : Pointer to ISP device + * return -ENOMEM or zero on success + */ +int omap3isp_resizer_init(struct isp_device *isp) +{ + struct isp_res_device *res = &isp->isp_res; + int ret; + + init_waitqueue_head(&res->wait); + atomic_set(&res->stopping, 0); + ret = resizer_init_entities(res); + if (ret < 0) + goto out; + +out: + if (ret) + omap3isp_resizer_cleanup(isp); + + return ret; +} diff --git a/drivers/media/video/omap3isp/ispresizer.h b/drivers/media/video/omap3isp/ispresizer.h new file mode 100644 index 000000000000..76abc2e42126 --- /dev/null +++ b/drivers/media/video/omap3isp/ispresizer.h @@ -0,0 +1,147 @@ +/* + * ispresizer.h + * + * TI OMAP3 ISP - Resizer module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_RESIZER_H +#define OMAP3_ISP_RESIZER_H + +#include <linux/types.h> + +/* + * Constants for filter coefficents count + */ +#define COEFF_CNT 32 + +/* + * struct isprsz_coef - Structure for resizer filter coeffcients. + * @h_filter_coef_4tap: Horizontal filter coefficients for 8-phase/4-tap + * mode (.5x-4x) + * @v_filter_coef_4tap: Vertical filter coefficients for 8-phase/4-tap + * mode (.5x-4x) + * @h_filter_coef_7tap: Horizontal filter coefficients for 4-phase/7-tap + * mode (.25x-.5x) + * @v_filter_coef_7tap: Vertical filter coefficients for 4-phase/7-tap + * mode (.25x-.5x) + */ +struct isprsz_coef { + u16 h_filter_coef_4tap[32]; + u16 v_filter_coef_4tap[32]; + /* Every 8th value is a dummy value in the following arrays: */ + u16 h_filter_coef_7tap[32]; + u16 v_filter_coef_7tap[32]; +}; + +/* Chrominance horizontal algorithm */ +enum resizer_chroma_algo { + RSZ_THE_SAME = 0, /* Chrominance the same as Luminance */ + RSZ_BILINEAR = 1, /* Chrominance uses bilinear interpolation */ +}; + +/* Resizer input type select */ +enum resizer_colors_type { + RSZ_YUV422 = 0, /* YUV422 color is interleaved */ + RSZ_COLOR8 = 1, /* Color separate data on 8 bits */ +}; + +/* + * Structure for horizontal and vertical resizing value + */ +struct resizer_ratio { + u32 horz; + u32 vert; +}; + +/* + * Structure for luminance enhancer parameters. + */ +struct resizer_luma_yenh { + u8 algo; /* algorithm select. */ + u8 gain; /* maximum gain. */ + u8 slope; /* slope. */ + u8 core; /* core offset. */ +}; + +enum resizer_input_entity { + RESIZER_INPUT_NONE, + RESIZER_INPUT_VP, /* input video port - prev or ccdc */ + RESIZER_INPUT_MEMORY, +}; + +/* Sink and source resizer pads */ +#define RESZ_PAD_SINK 0 +#define RESZ_PAD_SOURCE 1 +#define RESZ_PADS_NUM 2 + +/* + * struct isp_res_device - OMAP3 ISP resizer module + * @crop.request: Crop rectangle requested by the user + * @crop.active: Active crop rectangle (based on hardware requirements) + */ +struct isp_res_device { + struct v4l2_subdev subdev; + struct media_pad pads[RESZ_PADS_NUM]; + struct v4l2_mbus_framefmt formats[RESZ_PADS_NUM]; + + enum resizer_input_entity input; + struct isp_video video_in; + struct isp_video video_out; + unsigned int error; + + u32 addr_base; /* stored source buffer address in memory mode */ + u32 crop_offset; /* additional offset for crop in memory mode */ + struct resizer_ratio ratio; + int pm_state; + unsigned int applycrop:1; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; + + struct { + struct v4l2_rect request; + struct v4l2_rect active; + } crop; +}; + +struct isp_device; + +int omap3isp_resizer_init(struct isp_device *isp); +void omap3isp_resizer_cleanup(struct isp_device *isp); + +int omap3isp_resizer_register_entities(struct isp_res_device *res, + struct v4l2_device *vdev); +void omap3isp_resizer_unregister_entities(struct isp_res_device *res); +void omap3isp_resizer_isr_frame_sync(struct isp_res_device *res); +void omap3isp_resizer_isr(struct isp_res_device *isp_res); + +void omap3isp_resizer_max_rate(struct isp_res_device *res, + unsigned int *max_rate); + +void omap3isp_resizer_suspend(struct isp_res_device *isp_res); + +void omap3isp_resizer_resume(struct isp_res_device *isp_res); + +int omap3isp_resizer_busy(struct isp_res_device *isp_res); + +#endif /* OMAP3_ISP_RESIZER_H */ diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c new file mode 100644 index 000000000000..b44cb685236a --- /dev/null +++ b/drivers/media/video/omap3isp/ispstat.c @@ -0,0 +1,1092 @@ +/* + * ispstat.c + * + * TI OMAP3 ISP - Statistics core + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +#include "isp.h" + +#define IS_COHERENT_BUF(stat) ((stat)->dma_ch >= 0) + +/* + * MAGIC_SIZE must always be the greatest common divisor of + * AEWB_PACKET_SIZE and AF_PAXEL_SIZE. + */ +#define MAGIC_SIZE 16 +#define MAGIC_NUM 0x55 + +/* HACK: AF module seems to be writing one more paxel data than it should. */ +#define AF_EXTRA_DATA OMAP3ISP_AF_PAXEL_SIZE + +/* + * HACK: H3A modules go to an invalid state after have a SBL overflow. It makes + * the next buffer to start to be written in the same point where the overflow + * occurred instead of the configured address. The only known way to make it to + * go back to a valid state is having a valid buffer processing. Of course it + * requires at least a doubled buffer size to avoid an access to invalid memory + * region. But it does not fix everything. It may happen more than one + * consecutive SBL overflows. In that case, it might be unpredictable how many + * buffers the allocated memory should fit. For that case, a recover + * configuration was created. It produces the minimum buffer size for each H3A + * module and decrease the change for more SBL overflows. This recover state + * will be enabled every time a SBL overflow occur. As the output buffer size + * isn't big, it's possible to have an extra size able to fit many recover + * buffers making it extreamily unlikely to have an access to invalid memory + * region. + */ +#define NUM_H3A_RECOVER_BUFS 10 + +/* + * HACK: Because of HW issues the generic layer sometimes need to have + * different behaviour for different statistic modules. + */ +#define IS_H3A_AF(stat) ((stat) == &(stat)->isp->isp_af) +#define IS_H3A_AEWB(stat) ((stat) == &(stat)->isp->isp_aewb) +#define IS_H3A(stat) (IS_H3A_AF(stat) || IS_H3A_AEWB(stat)) + +static void __isp_stat_buf_sync_magic(struct ispstat *stat, + struct ispstat_buffer *buf, + u32 buf_size, enum dma_data_direction dir, + void (*dma_sync)(struct device *, + dma_addr_t, unsigned long, size_t, + enum dma_data_direction)) +{ + struct device *dev = stat->isp->dev; + struct page *pg; + dma_addr_t dma_addr; + u32 offset; + + /* Initial magic words */ + pg = vmalloc_to_page(buf->virt_addr); + dma_addr = pfn_to_dma(dev, page_to_pfn(pg)); + dma_sync(dev, dma_addr, 0, MAGIC_SIZE, dir); + + /* Final magic words */ + pg = vmalloc_to_page(buf->virt_addr + buf_size); + dma_addr = pfn_to_dma(dev, page_to_pfn(pg)); + offset = ((u32)buf->virt_addr + buf_size) & ~PAGE_MASK; + dma_sync(dev, dma_addr, offset, MAGIC_SIZE, dir); +} + +static void isp_stat_buf_sync_magic_for_device(struct ispstat *stat, + struct ispstat_buffer *buf, + u32 buf_size, + enum dma_data_direction dir) +{ + if (IS_COHERENT_BUF(stat)) + return; + + __isp_stat_buf_sync_magic(stat, buf, buf_size, dir, + dma_sync_single_range_for_device); +} + +static void isp_stat_buf_sync_magic_for_cpu(struct ispstat *stat, + struct ispstat_buffer *buf, + u32 buf_size, + enum dma_data_direction dir) +{ + if (IS_COHERENT_BUF(stat)) + return; + + __isp_stat_buf_sync_magic(stat, buf, buf_size, dir, + dma_sync_single_range_for_cpu); +} + +static int isp_stat_buf_check_magic(struct ispstat *stat, + struct ispstat_buffer *buf) +{ + const u32 buf_size = IS_H3A_AF(stat) ? + buf->buf_size + AF_EXTRA_DATA : buf->buf_size; + u8 *w; + u8 *end; + int ret = -EINVAL; + + isp_stat_buf_sync_magic_for_cpu(stat, buf, buf_size, DMA_FROM_DEVICE); + + /* Checking initial magic numbers. They shouldn't be here anymore. */ + for (w = buf->virt_addr, end = w + MAGIC_SIZE; w < end; w++) + if (likely(*w != MAGIC_NUM)) + ret = 0; + + if (ret) { + dev_dbg(stat->isp->dev, "%s: beginning magic check does not " + "match.\n", stat->subdev.name); + return ret; + } + + /* Checking magic numbers at the end. They must be still here. */ + for (w = buf->virt_addr + buf_size, end = w + MAGIC_SIZE; + w < end; w++) { + if (unlikely(*w != MAGIC_NUM)) { + dev_dbg(stat->isp->dev, "%s: endding magic check does " + "not match.\n", stat->subdev.name); + return -EINVAL; + } + } + + isp_stat_buf_sync_magic_for_device(stat, buf, buf_size, + DMA_FROM_DEVICE); + + return 0; +} + +static void isp_stat_buf_insert_magic(struct ispstat *stat, + struct ispstat_buffer *buf) +{ + const u32 buf_size = IS_H3A_AF(stat) ? + stat->buf_size + AF_EXTRA_DATA : stat->buf_size; + + isp_stat_buf_sync_magic_for_cpu(stat, buf, buf_size, DMA_FROM_DEVICE); + + /* + * Inserting MAGIC_NUM at the beginning and end of the buffer. + * buf->buf_size is set only after the buffer is queued. For now the + * right buf_size for the current configuration is pointed by + * stat->buf_size. + */ + memset(buf->virt_addr, MAGIC_NUM, MAGIC_SIZE); + memset(buf->virt_addr + buf_size, MAGIC_NUM, MAGIC_SIZE); + + isp_stat_buf_sync_magic_for_device(stat, buf, buf_size, + DMA_BIDIRECTIONAL); +} + +static void isp_stat_buf_sync_for_device(struct ispstat *stat, + struct ispstat_buffer *buf) +{ + if (IS_COHERENT_BUF(stat)) + return; + + dma_sync_sg_for_device(stat->isp->dev, buf->iovm->sgt->sgl, + buf->iovm->sgt->nents, DMA_FROM_DEVICE); +} + +static void isp_stat_buf_sync_for_cpu(struct ispstat *stat, + struct ispstat_buffer *buf) +{ + if (IS_COHERENT_BUF(stat)) + return; + + dma_sync_sg_for_cpu(stat->isp->dev, buf->iovm->sgt->sgl, + buf->iovm->sgt->nents, DMA_FROM_DEVICE); +} + +static void isp_stat_buf_clear(struct ispstat *stat) +{ + int i; + + for (i = 0; i < STAT_MAX_BUFS; i++) + stat->buf[i].empty = 1; +} + +static struct ispstat_buffer * +__isp_stat_buf_find(struct ispstat *stat, int look_empty) +{ + struct ispstat_buffer *found = NULL; + int i; + + for (i = 0; i < STAT_MAX_BUFS; i++) { + struct ispstat_buffer *curr = &stat->buf[i]; + + /* + * Don't select the buffer which is being copied to + * userspace or used by the module. + */ + if (curr == stat->locked_buf || curr == stat->active_buf) + continue; + + /* Don't select uninitialised buffers if it's not required */ + if (!look_empty && curr->empty) + continue; + + /* Pick uninitialised buffer over anything else if look_empty */ + if (curr->empty) { + found = curr; + break; + } + + /* Choose the oldest buffer */ + if (!found || + (s32)curr->frame_number - (s32)found->frame_number < 0) + found = curr; + } + + return found; +} + +static inline struct ispstat_buffer * +isp_stat_buf_find_oldest(struct ispstat *stat) +{ + return __isp_stat_buf_find(stat, 0); +} + +static inline struct ispstat_buffer * +isp_stat_buf_find_oldest_or_empty(struct ispstat *stat) +{ + return __isp_stat_buf_find(stat, 1); +} + +static int isp_stat_buf_queue(struct ispstat *stat) +{ + if (!stat->active_buf) + return STAT_NO_BUF; + + do_gettimeofday(&stat->active_buf->ts); + + stat->active_buf->buf_size = stat->buf_size; + if (isp_stat_buf_check_magic(stat, stat->active_buf)) { + dev_dbg(stat->isp->dev, "%s: data wasn't properly written.\n", + stat->subdev.name); + return STAT_NO_BUF; + } + stat->active_buf->config_counter = stat->config_counter; + stat->active_buf->frame_number = stat->frame_number; + stat->active_buf->empty = 0; + stat->active_buf = NULL; + + return STAT_BUF_DONE; +} + +/* Get next free buffer to write the statistics to and mark it active. */ +static void isp_stat_buf_next(struct ispstat *stat) +{ + if (unlikely(stat->active_buf)) + /* Overwriting unused active buffer */ + dev_dbg(stat->isp->dev, "%s: new buffer requested without " + "queuing active one.\n", + stat->subdev.name); + else + stat->active_buf = isp_stat_buf_find_oldest_or_empty(stat); +} + +static void isp_stat_buf_release(struct ispstat *stat) +{ + unsigned long flags; + + isp_stat_buf_sync_for_device(stat, stat->locked_buf); + spin_lock_irqsave(&stat->isp->stat_lock, flags); + stat->locked_buf = NULL; + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); +} + +/* Get buffer to userspace. */ +static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat, + struct omap3isp_stat_data *data) +{ + int rval = 0; + unsigned long flags; + struct ispstat_buffer *buf; + + spin_lock_irqsave(&stat->isp->stat_lock, flags); + + while (1) { + buf = isp_stat_buf_find_oldest(stat); + if (!buf) { + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + dev_dbg(stat->isp->dev, "%s: cannot find a buffer.\n", + stat->subdev.name); + return ERR_PTR(-EBUSY); + } + if (isp_stat_buf_check_magic(stat, buf)) { + dev_dbg(stat->isp->dev, "%s: current buffer has " + "corrupted data\n.", stat->subdev.name); + /* Mark empty because it doesn't have valid data. */ + buf->empty = 1; + } else { + /* Buffer isn't corrupted. */ + break; + } + } + + stat->locked_buf = buf; + + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + + if (buf->buf_size > data->buf_size) { + dev_warn(stat->isp->dev, "%s: userspace's buffer size is " + "not enough.\n", stat->subdev.name); + isp_stat_buf_release(stat); + return ERR_PTR(-EINVAL); + } + + isp_stat_buf_sync_for_cpu(stat, buf); + + rval = copy_to_user(data->buf, + buf->virt_addr, + buf->buf_size); + + if (rval) { + dev_info(stat->isp->dev, + "%s: failed copying %d bytes of stat data\n", + stat->subdev.name, rval); + buf = ERR_PTR(-EFAULT); + isp_stat_buf_release(stat); + } + + return buf; +} + +static void isp_stat_bufs_free(struct ispstat *stat) +{ + struct isp_device *isp = stat->isp; + int i; + + for (i = 0; i < STAT_MAX_BUFS; i++) { + struct ispstat_buffer *buf = &stat->buf[i]; + + if (!IS_COHERENT_BUF(stat)) { + if (IS_ERR_OR_NULL((void *)buf->iommu_addr)) + continue; + if (buf->iovm) + dma_unmap_sg(isp->dev, buf->iovm->sgt->sgl, + buf->iovm->sgt->nents, + DMA_FROM_DEVICE); + iommu_vfree(isp->iommu, buf->iommu_addr); + } else { + if (!buf->virt_addr) + continue; + dma_free_coherent(stat->isp->dev, stat->buf_alloc_size, + buf->virt_addr, buf->dma_addr); + } + buf->iommu_addr = 0; + buf->iovm = NULL; + buf->dma_addr = 0; + buf->virt_addr = NULL; + buf->empty = 1; + } + + dev_dbg(stat->isp->dev, "%s: all buffers were freed.\n", + stat->subdev.name); + + stat->buf_alloc_size = 0; + stat->active_buf = NULL; +} + +static int isp_stat_bufs_alloc_iommu(struct ispstat *stat, unsigned int size) +{ + struct isp_device *isp = stat->isp; + int i; + + stat->buf_alloc_size = size; + + for (i = 0; i < STAT_MAX_BUFS; i++) { + struct ispstat_buffer *buf = &stat->buf[i]; + struct iovm_struct *iovm; + + WARN_ON(buf->dma_addr); + buf->iommu_addr = iommu_vmalloc(isp->iommu, 0, size, + IOMMU_FLAG); + if (IS_ERR((void *)buf->iommu_addr)) { + dev_err(stat->isp->dev, + "%s: Can't acquire memory for " + "buffer %d\n", stat->subdev.name, i); + isp_stat_bufs_free(stat); + return -ENOMEM; + } + + iovm = find_iovm_area(isp->iommu, buf->iommu_addr); + if (!iovm || + !dma_map_sg(isp->dev, iovm->sgt->sgl, iovm->sgt->nents, + DMA_FROM_DEVICE)) { + isp_stat_bufs_free(stat); + return -ENOMEM; + } + buf->iovm = iovm; + + buf->virt_addr = da_to_va(stat->isp->iommu, + (u32)buf->iommu_addr); + buf->empty = 1; + dev_dbg(stat->isp->dev, "%s: buffer[%d] allocated." + "iommu_addr=0x%08lx virt_addr=0x%08lx", + stat->subdev.name, i, buf->iommu_addr, + (unsigned long)buf->virt_addr); + } + + return 0; +} + +static int isp_stat_bufs_alloc_dma(struct ispstat *stat, unsigned int size) +{ + int i; + + stat->buf_alloc_size = size; + + for (i = 0; i < STAT_MAX_BUFS; i++) { + struct ispstat_buffer *buf = &stat->buf[i]; + + WARN_ON(buf->iommu_addr); + buf->virt_addr = dma_alloc_coherent(stat->isp->dev, size, + &buf->dma_addr, GFP_KERNEL | GFP_DMA); + + if (!buf->virt_addr || !buf->dma_addr) { + dev_info(stat->isp->dev, + "%s: Can't acquire memory for " + "DMA buffer %d\n", stat->subdev.name, i); + isp_stat_bufs_free(stat); + return -ENOMEM; + } + buf->empty = 1; + + dev_dbg(stat->isp->dev, "%s: buffer[%d] allocated." + "dma_addr=0x%08lx virt_addr=0x%08lx\n", + stat->subdev.name, i, (unsigned long)buf->dma_addr, + (unsigned long)buf->virt_addr); + } + + return 0; +} + +static int isp_stat_bufs_alloc(struct ispstat *stat, u32 size) +{ + unsigned long flags; + + spin_lock_irqsave(&stat->isp->stat_lock, flags); + + BUG_ON(stat->locked_buf != NULL); + + /* Are the old buffers big enough? */ + if (stat->buf_alloc_size >= size) { + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + return 0; + } + + if (stat->state != ISPSTAT_DISABLED || stat->buf_processing) { + dev_info(stat->isp->dev, + "%s: trying to allocate memory when busy\n", + stat->subdev.name); + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + return -EBUSY; + } + + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + + isp_stat_bufs_free(stat); + + if (IS_COHERENT_BUF(stat)) + return isp_stat_bufs_alloc_dma(stat, size); + else + return isp_stat_bufs_alloc_iommu(stat, size); +} + +static void isp_stat_queue_event(struct ispstat *stat, int err) +{ + struct video_device *vdev = &stat->subdev.devnode; + struct v4l2_event event; + struct omap3isp_stat_event_status *status = (void *)event.u.data; + + memset(&event, 0, sizeof(event)); + if (!err) { + status->frame_number = stat->frame_number; + status->config_counter = stat->config_counter; + } else { + status->buf_err = 1; + } + event.type = stat->event_type; + v4l2_event_queue(vdev, &event); +} + + +/* + * omap3isp_stat_request_statistics - Request statistics. + * @data: Pointer to return statistics data. + * + * Returns 0 if successful. + */ +int omap3isp_stat_request_statistics(struct ispstat *stat, + struct omap3isp_stat_data *data) +{ + struct ispstat_buffer *buf; + + if (stat->state != ISPSTAT_ENABLED) { + dev_dbg(stat->isp->dev, "%s: engine not enabled.\n", + stat->subdev.name); + return -EINVAL; + } + + mutex_lock(&stat->ioctl_lock); + buf = isp_stat_buf_get(stat, data); + if (IS_ERR(buf)) { + mutex_unlock(&stat->ioctl_lock); + return PTR_ERR(buf); + } + + data->ts = buf->ts; + data->config_counter = buf->config_counter; + data->frame_number = buf->frame_number; + data->buf_size = buf->buf_size; + + buf->empty = 1; + isp_stat_buf_release(stat); + mutex_unlock(&stat->ioctl_lock); + + return 0; +} + +/* + * omap3isp_stat_config - Receives new statistic engine configuration. + * @new_conf: Pointer to config structure. + * + * Returns 0 if successful, -EINVAL if new_conf pointer is NULL, -ENOMEM if + * was unable to allocate memory for the buffer, or other errors if parameters + * are invalid. + */ +int omap3isp_stat_config(struct ispstat *stat, void *new_conf) +{ + int ret; + unsigned long irqflags; + struct ispstat_generic_config *user_cfg = new_conf; + u32 buf_size = user_cfg->buf_size; + + if (!new_conf) { + dev_dbg(stat->isp->dev, "%s: configuration is NULL\n", + stat->subdev.name); + return -EINVAL; + } + + mutex_lock(&stat->ioctl_lock); + + dev_dbg(stat->isp->dev, "%s: configuring module with buffer " + "size=0x%08lx\n", stat->subdev.name, (unsigned long)buf_size); + + ret = stat->ops->validate_params(stat, new_conf); + if (ret) { + mutex_unlock(&stat->ioctl_lock); + dev_dbg(stat->isp->dev, "%s: configuration values are " + "invalid.\n", stat->subdev.name); + return ret; + } + + if (buf_size != user_cfg->buf_size) + dev_dbg(stat->isp->dev, "%s: driver has corrected buffer size " + "request to 0x%08lx\n", stat->subdev.name, + (unsigned long)user_cfg->buf_size); + + /* + * Hack: H3A modules may need a doubled buffer size to avoid access + * to a invalid memory address after a SBL overflow. + * The buffer size is always PAGE_ALIGNED. + * Hack 2: MAGIC_SIZE is added to buf_size so a magic word can be + * inserted at the end to data integrity check purpose. + * Hack 3: AF module writes one paxel data more than it should, so + * the buffer allocation must consider it to avoid invalid memory + * access. + * Hack 4: H3A need to allocate extra space for the recover state. + */ + if (IS_H3A(stat)) { + buf_size = user_cfg->buf_size * 2 + MAGIC_SIZE; + if (IS_H3A_AF(stat)) + /* + * Adding one extra paxel data size for each recover + * buffer + 2 regular ones. + */ + buf_size += AF_EXTRA_DATA * (NUM_H3A_RECOVER_BUFS + 2); + if (stat->recover_priv) { + struct ispstat_generic_config *recover_cfg = + stat->recover_priv; + buf_size += recover_cfg->buf_size * + NUM_H3A_RECOVER_BUFS; + } + buf_size = PAGE_ALIGN(buf_size); + } else { /* Histogram */ + buf_size = PAGE_ALIGN(user_cfg->buf_size + MAGIC_SIZE); + } + + ret = isp_stat_bufs_alloc(stat, buf_size); + if (ret) { + mutex_unlock(&stat->ioctl_lock); + return ret; + } + + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + stat->ops->set_params(stat, new_conf); + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + + /* + * Returning the right future config_counter for this setup, so + * userspace can *know* when it has been applied. + */ + user_cfg->config_counter = stat->config_counter + stat->inc_config; + + /* Module has a valid configuration. */ + stat->configured = 1; + dev_dbg(stat->isp->dev, "%s: module has been successfully " + "configured.\n", stat->subdev.name); + + mutex_unlock(&stat->ioctl_lock); + + return 0; +} + +/* + * isp_stat_buf_process - Process statistic buffers. + * @buf_state: points out if buffer is ready to be processed. It's necessary + * because histogram needs to copy the data from internal memory + * before be able to process the buffer. + */ +static int isp_stat_buf_process(struct ispstat *stat, int buf_state) +{ + int ret = STAT_NO_BUF; + + if (!atomic_add_unless(&stat->buf_err, -1, 0) && + buf_state == STAT_BUF_DONE && stat->state == ISPSTAT_ENABLED) { + ret = isp_stat_buf_queue(stat); + isp_stat_buf_next(stat); + } + + return ret; +} + +int omap3isp_stat_pcr_busy(struct ispstat *stat) +{ + return stat->ops->busy(stat); +} + +int omap3isp_stat_busy(struct ispstat *stat) +{ + return omap3isp_stat_pcr_busy(stat) | stat->buf_processing | + (stat->state != ISPSTAT_DISABLED); +} + +/* + * isp_stat_pcr_enable - Disables/Enables statistic engines. + * @pcr_enable: 0/1 - Disables/Enables the engine. + * + * Must be called from ISP driver when the module is idle and synchronized + * with CCDC. + */ +static void isp_stat_pcr_enable(struct ispstat *stat, u8 pcr_enable) +{ + if ((stat->state != ISPSTAT_ENABLING && + stat->state != ISPSTAT_ENABLED) && pcr_enable) + /* Userspace has disabled the module. Aborting. */ + return; + + stat->ops->enable(stat, pcr_enable); + if (stat->state == ISPSTAT_DISABLING && !pcr_enable) + stat->state = ISPSTAT_DISABLED; + else if (stat->state == ISPSTAT_ENABLING && pcr_enable) + stat->state = ISPSTAT_ENABLED; +} + +void omap3isp_stat_suspend(struct ispstat *stat) +{ + unsigned long flags; + + spin_lock_irqsave(&stat->isp->stat_lock, flags); + + if (stat->state != ISPSTAT_DISABLED) + stat->ops->enable(stat, 0); + if (stat->state == ISPSTAT_ENABLED) + stat->state = ISPSTAT_SUSPENDED; + + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); +} + +void omap3isp_stat_resume(struct ispstat *stat) +{ + /* Module will be re-enabled with its pipeline */ + if (stat->state == ISPSTAT_SUSPENDED) + stat->state = ISPSTAT_ENABLING; +} + +static void isp_stat_try_enable(struct ispstat *stat) +{ + unsigned long irqflags; + + if (stat->priv == NULL) + /* driver wasn't initialised */ + return; + + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + if (stat->state == ISPSTAT_ENABLING && !stat->buf_processing && + stat->buf_alloc_size) { + /* + * Userspace's requested to enable the engine but it wasn't yet. + * Let's do that now. + */ + stat->update = 1; + isp_stat_buf_next(stat); + stat->ops->setup_regs(stat, stat->priv); + isp_stat_buf_insert_magic(stat, stat->active_buf); + + /* + * H3A module has some hw issues which forces the driver to + * ignore next buffers even if it was disabled in the meantime. + * On the other hand, Histogram shouldn't ignore buffers anymore + * if it's being enabled. + */ + if (!IS_H3A(stat)) + atomic_set(&stat->buf_err, 0); + + isp_stat_pcr_enable(stat, 1); + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + dev_dbg(stat->isp->dev, "%s: module is enabled.\n", + stat->subdev.name); + } else { + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + } +} + +void omap3isp_stat_isr_frame_sync(struct ispstat *stat) +{ + isp_stat_try_enable(stat); +} + +void omap3isp_stat_sbl_overflow(struct ispstat *stat) +{ + unsigned long irqflags; + + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + /* + * Due to a H3A hw issue which prevents the next buffer to start from + * the correct memory address, 2 buffers must be ignored. + */ + atomic_set(&stat->buf_err, 2); + + /* + * If more than one SBL overflow happen in a row, H3A module may access + * invalid memory region. + * stat->sbl_ovl_recover is set to tell to the driver to temporarily use + * a soft configuration which helps to avoid consecutive overflows. + */ + if (stat->recover_priv) + stat->sbl_ovl_recover = 1; + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); +} + +/* + * omap3isp_stat_enable - Disable/Enable statistic engine as soon as possible + * @enable: 0/1 - Disables/Enables the engine. + * + * Client should configure all the module registers before this. + * This function can be called from a userspace request. + */ +int omap3isp_stat_enable(struct ispstat *stat, u8 enable) +{ + unsigned long irqflags; + + dev_dbg(stat->isp->dev, "%s: user wants to %s module.\n", + stat->subdev.name, enable ? "enable" : "disable"); + + /* Prevent enabling while configuring */ + mutex_lock(&stat->ioctl_lock); + + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + + if (!stat->configured && enable) { + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + mutex_unlock(&stat->ioctl_lock); + dev_dbg(stat->isp->dev, "%s: cannot enable module as it's " + "never been successfully configured so far.\n", + stat->subdev.name); + return -EINVAL; + } + + if (enable) { + if (stat->state == ISPSTAT_DISABLING) + /* Previous disabling request wasn't done yet */ + stat->state = ISPSTAT_ENABLED; + else if (stat->state == ISPSTAT_DISABLED) + /* Module is now being enabled */ + stat->state = ISPSTAT_ENABLING; + } else { + if (stat->state == ISPSTAT_ENABLING) { + /* Previous enabling request wasn't done yet */ + stat->state = ISPSTAT_DISABLED; + } else if (stat->state == ISPSTAT_ENABLED) { + /* Module is now being disabled */ + stat->state = ISPSTAT_DISABLING; + isp_stat_buf_clear(stat); + } + } + + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + mutex_unlock(&stat->ioctl_lock); + + return 0; +} + +int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct ispstat *stat = v4l2_get_subdevdata(subdev); + + if (enable) { + /* + * Only set enable PCR bit if the module was previously + * enabled through ioct. + */ + isp_stat_try_enable(stat); + } else { + unsigned long flags; + /* Disable PCR bit and config enable field */ + omap3isp_stat_enable(stat, 0); + spin_lock_irqsave(&stat->isp->stat_lock, flags); + stat->ops->enable(stat, 0); + spin_unlock_irqrestore(&stat->isp->stat_lock, flags); + + /* + * If module isn't busy, a new interrupt may come or not to + * set the state to DISABLED. As Histogram needs to read its + * internal memory to clear it, let interrupt handler + * responsible of changing state to DISABLED. If the last + * interrupt is coming, it's still safe as the handler will + * ignore the second time when state is already set to DISABLED. + * It's necessary to synchronize Histogram with streamoff, once + * the module may be considered idle before last SDMA transfer + * starts if we return here. + */ + if (!omap3isp_stat_pcr_busy(stat)) + omap3isp_stat_isr(stat); + + dev_dbg(stat->isp->dev, "%s: module is being disabled\n", + stat->subdev.name); + } + + return 0; +} + +/* + * __stat_isr - Interrupt handler for statistic drivers + */ +static void __stat_isr(struct ispstat *stat, int from_dma) +{ + int ret = STAT_BUF_DONE; + int buf_processing; + unsigned long irqflags; + struct isp_pipeline *pipe; + + /* + * stat->buf_processing must be set before disable module. It's + * necessary to not inform too early the buffers aren't busy in case + * of SDMA is going to be used. + */ + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + if (stat->state == ISPSTAT_DISABLED) { + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + return; + } + buf_processing = stat->buf_processing; + stat->buf_processing = 1; + stat->ops->enable(stat, 0); + + if (buf_processing && !from_dma) { + if (stat->state == ISPSTAT_ENABLED) { + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + dev_err(stat->isp->dev, + "%s: interrupt occurred when module was still " + "processing a buffer.\n", stat->subdev.name); + ret = STAT_NO_BUF; + goto out; + } else { + /* + * Interrupt handler was called from streamoff when + * the module wasn't busy anymore to ensure it is being + * disabled after process last buffer. If such buffer + * processing has already started, no need to do + * anything else. + */ + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + return; + } + } + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + + /* If it's busy we can't process this buffer anymore */ + if (!omap3isp_stat_pcr_busy(stat)) { + if (!from_dma && stat->ops->buf_process) + /* Module still need to copy data to buffer. */ + ret = stat->ops->buf_process(stat); + if (ret == STAT_BUF_WAITING_DMA) + /* Buffer is not ready yet */ + return; + + spin_lock_irqsave(&stat->isp->stat_lock, irqflags); + + /* + * Histogram needs to read its internal memory to clear it + * before be disabled. For that reason, common statistic layer + * can return only after call stat's buf_process() operator. + */ + if (stat->state == ISPSTAT_DISABLING) { + stat->state = ISPSTAT_DISABLED; + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + stat->buf_processing = 0; + return; + } + pipe = to_isp_pipeline(&stat->subdev.entity); + stat->frame_number = atomic_read(&pipe->frame_number); + + /* + * Before this point, 'ret' stores the buffer's status if it's + * ready to be processed. Afterwards, it holds the status if + * it was processed successfully. + */ + ret = isp_stat_buf_process(stat, ret); + + if (likely(!stat->sbl_ovl_recover)) { + stat->ops->setup_regs(stat, stat->priv); + } else { + /* + * Using recover config to increase the chance to have + * a good buffer processing and make the H3A module to + * go back to a valid state. + */ + stat->update = 1; + stat->ops->setup_regs(stat, stat->recover_priv); + stat->sbl_ovl_recover = 0; + + /* + * Set 'update' in case of the module needs to use + * regular configuration after next buffer. + */ + stat->update = 1; + } + + isp_stat_buf_insert_magic(stat, stat->active_buf); + + /* + * Hack: H3A modules may access invalid memory address or send + * corrupted data to userspace if more than 1 SBL overflow + * happens in a row without re-writing its buffer's start memory + * address in the meantime. Such situation is avoided if the + * module is not immediately re-enabled when the ISR misses the + * timing to process the buffer and to setup the registers. + * Because of that, pcr_enable(1) was moved to inside this 'if' + * block. But the next interruption will still happen as during + * pcr_enable(0) the module was busy. + */ + isp_stat_pcr_enable(stat, 1); + spin_unlock_irqrestore(&stat->isp->stat_lock, irqflags); + } else { + /* + * If a SBL overflow occurs and the H3A driver misses the timing + * to process the buffer, stat->buf_err is set and won't be + * cleared now. So the next buffer will be correctly ignored. + * It's necessary due to a hw issue which makes the next H3A + * buffer to start from the memory address where the previous + * one stopped, instead of start where it was configured to. + * Do not "stat->buf_err = 0" here. + */ + + if (stat->ops->buf_process) + /* + * Driver may need to erase current data prior to + * process a new buffer. If it misses the timing, the + * next buffer might be wrong. So should be ignored. + * It happens only for Histogram. + */ + atomic_set(&stat->buf_err, 1); + + ret = STAT_NO_BUF; + dev_dbg(stat->isp->dev, "%s: cannot process buffer, " + "device is busy.\n", stat->subdev.name); + } + +out: + stat->buf_processing = 0; + isp_stat_queue_event(stat, ret != STAT_BUF_DONE); +} + +void omap3isp_stat_isr(struct ispstat *stat) +{ + __stat_isr(stat, 0); +} + +void omap3isp_stat_dma_isr(struct ispstat *stat) +{ + __stat_isr(stat, 1); +} + +static int isp_stat_init_entities(struct ispstat *stat, const char *name, + const struct v4l2_subdev_ops *sd_ops) +{ + struct v4l2_subdev *subdev = &stat->subdev; + struct media_entity *me = &subdev->entity; + + v4l2_subdev_init(subdev, sd_ops); + snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name); + subdev->grp_id = 1 << 16; /* group ID for isp subdevs */ + subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; + subdev->nevents = STAT_NEVENTS; + v4l2_set_subdevdata(subdev, stat); + + stat->pad.flags = MEDIA_PAD_FL_SINK; + me->ops = NULL; + + return media_entity_init(me, 1, &stat->pad, 0); +} + +int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + struct ispstat *stat = v4l2_get_subdevdata(subdev); + + if (sub->type != stat->event_type) + return -EINVAL; + + return v4l2_event_subscribe(fh, sub); +} + +int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + return v4l2_event_unsubscribe(fh, sub); +} + +void omap3isp_stat_unregister_entities(struct ispstat *stat) +{ + media_entity_cleanup(&stat->subdev.entity); + v4l2_device_unregister_subdev(&stat->subdev); +} + +int omap3isp_stat_register_entities(struct ispstat *stat, + struct v4l2_device *vdev) +{ + return v4l2_device_register_subdev(vdev, &stat->subdev); +} + +int omap3isp_stat_init(struct ispstat *stat, const char *name, + const struct v4l2_subdev_ops *sd_ops) +{ + stat->buf = kcalloc(STAT_MAX_BUFS, sizeof(*stat->buf), GFP_KERNEL); + if (!stat->buf) + return -ENOMEM; + isp_stat_buf_clear(stat); + mutex_init(&stat->ioctl_lock); + atomic_set(&stat->buf_err, 0); + + return isp_stat_init_entities(stat, name, sd_ops); +} + +void omap3isp_stat_free(struct ispstat *stat) +{ + isp_stat_bufs_free(stat); + kfree(stat->buf); +} diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h new file mode 100644 index 000000000000..820950c9ef46 --- /dev/null +++ b/drivers/media/video/omap3isp/ispstat.h @@ -0,0 +1,169 @@ +/* + * ispstat.h + * + * TI OMAP3 ISP - Statistics core + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc + * + * Contacts: David Cohen <dacohen@gmail.com> + * Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_STAT_H +#define OMAP3_ISP_STAT_H + +#include <linux/types.h> +#include <linux/omap3isp.h> +#include <plat/dma.h> +#include <media/v4l2-event.h> + +#include "isp.h" +#include "ispvideo.h" + +#define STAT_MAX_BUFS 5 +#define STAT_NEVENTS 8 + +#define STAT_BUF_DONE 0 /* Buffer is ready */ +#define STAT_NO_BUF 1 /* An error has occurred */ +#define STAT_BUF_WAITING_DMA 2 /* Histogram only: DMA is running */ + +struct ispstat; + +struct ispstat_buffer { + unsigned long iommu_addr; + struct iovm_struct *iovm; + void *virt_addr; + dma_addr_t dma_addr; + struct timeval ts; + u32 buf_size; + u32 frame_number; + u16 config_counter; + u8 empty; +}; + +struct ispstat_ops { + /* + * Validate new params configuration. + * new_conf->buf_size value must be changed to the exact buffer size + * necessary for the new configuration if it's smaller. + */ + int (*validate_params)(struct ispstat *stat, void *new_conf); + + /* + * Save new params configuration. + * stat->priv->buf_size value must be set to the exact buffer size for + * the new configuration. + * stat->update is set to 1 if new configuration is different than + * current one. + */ + void (*set_params)(struct ispstat *stat, void *new_conf); + + /* Apply stored configuration. */ + void (*setup_regs)(struct ispstat *stat, void *priv); + + /* Enable/Disable module. */ + void (*enable)(struct ispstat *stat, int enable); + + /* Verify is module is busy. */ + int (*busy)(struct ispstat *stat); + + /* Used for specific operations during generic buf process task. */ + int (*buf_process)(struct ispstat *stat); +}; + +enum ispstat_state_t { + ISPSTAT_DISABLED = 0, + ISPSTAT_DISABLING, + ISPSTAT_ENABLED, + ISPSTAT_ENABLING, + ISPSTAT_SUSPENDED, +}; + +struct ispstat { + struct v4l2_subdev subdev; + struct media_pad pad; /* sink pad */ + + /* Control */ + unsigned configured:1; + unsigned update:1; + unsigned buf_processing:1; + unsigned sbl_ovl_recover:1; + u8 inc_config; + atomic_t buf_err; + enum ispstat_state_t state; /* enabling/disabling state */ + struct omap_dma_channel_params dma_config; + struct isp_device *isp; + void *priv; /* pointer to priv config struct */ + void *recover_priv; /* pointer to recover priv configuration */ + struct mutex ioctl_lock; /* serialize private ioctl */ + + const struct ispstat_ops *ops; + + /* Buffer */ + u8 wait_acc_frames; + u16 config_counter; + u32 frame_number; + u32 buf_size; + u32 buf_alloc_size; + int dma_ch; + unsigned long event_type; + struct ispstat_buffer *buf; + struct ispstat_buffer *active_buf; + struct ispstat_buffer *locked_buf; +}; + +struct ispstat_generic_config { + /* + * Fields must be in the same order as in: + * - isph3a_aewb_config + * - isph3a_af_config + * - isphist_config + */ + u32 buf_size; + u16 config_counter; +}; + +int omap3isp_stat_config(struct ispstat *stat, void *new_conf); +int omap3isp_stat_request_statistics(struct ispstat *stat, + struct omap3isp_stat_data *data); +int omap3isp_stat_init(struct ispstat *stat, const char *name, + const struct v4l2_subdev_ops *sd_ops); +void omap3isp_stat_free(struct ispstat *stat); +int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable); + +int omap3isp_stat_busy(struct ispstat *stat); +int omap3isp_stat_pcr_busy(struct ispstat *stat); +void omap3isp_stat_suspend(struct ispstat *stat); +void omap3isp_stat_resume(struct ispstat *stat); +int omap3isp_stat_enable(struct ispstat *stat, u8 enable); +void omap3isp_stat_sbl_overflow(struct ispstat *stat); +void omap3isp_stat_isr(struct ispstat *stat); +void omap3isp_stat_isr_frame_sync(struct ispstat *stat); +void omap3isp_stat_dma_isr(struct ispstat *stat); +int omap3isp_stat_register_entities(struct ispstat *stat, + struct v4l2_device *vdev); +void omap3isp_stat_unregister_entities(struct ispstat *stat); + +#endif /* OMAP3_ISP_STAT_H */ diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c new file mode 100644 index 000000000000..a0bb5db9cb8a --- /dev/null +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -0,0 +1,1255 @@ +/* + * ispvideo.c + * + * TI OMAP3 ISP - Generic video node + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <asm/cacheflush.h> +#include <linux/clk.h> +#include <linux/mm.h> +#include <linux/pagemap.h> +#include <linux/scatterlist.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <plat/iommu.h> +#include <plat/iovmm.h> +#include <plat/omap-pm.h> + +#include "ispvideo.h" +#include "isp.h" + + +/* ----------------------------------------------------------------------------- + * Helper functions + */ + +static struct isp_format_info formats[] = { + { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, + V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, }, + { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, + V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, + { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10, 10, }, + { V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10, 10, }, + { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10, 10, }, + { V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10, 10, }, + { V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12, 12, }, + { V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12, 12, }, + { V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12, 12, }, + { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12, 12, }, + { V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, + V4L2_MBUS_FMT_UYVY8_1X16, V4L2_PIX_FMT_UYVY, 16, }, + { V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, + V4L2_MBUS_FMT_YUYV8_1X16, V4L2_PIX_FMT_YUYV, 16, }, +}; + +const struct isp_format_info * +omap3isp_video_format_info(enum v4l2_mbus_pixelcode code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].code == code) + return &formats[i]; + } + + return NULL; +} + +/* + * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format + * @video: ISP video instance + * @mbus: v4l2_mbus_framefmt format (input) + * @pix: v4l2_pix_format format (output) + * + * Fill the output pix structure with information from the input mbus format. + * The bytesperline and sizeimage fields are computed from the requested bytes + * per line value in the pix format and information from the video instance. + * + * Return the number of padding bytes at end of line. + */ +static unsigned int isp_video_mbus_to_pix(const struct isp_video *video, + const struct v4l2_mbus_framefmt *mbus, + struct v4l2_pix_format *pix) +{ + unsigned int bpl = pix->bytesperline; + unsigned int min_bpl; + unsigned int i; + + memset(pix, 0, sizeof(*pix)); + pix->width = mbus->width; + pix->height = mbus->height; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].code == mbus->code) + break; + } + + if (WARN_ON(i == ARRAY_SIZE(formats))) + return 0; + + min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8; + + /* Clamp the requested bytes per line value. If the maximum bytes per + * line value is zero, the module doesn't support user configurable line + * sizes. Override the requested value with the minimum in that case. + */ + if (video->bpl_max) + bpl = clamp(bpl, min_bpl, video->bpl_max); + else + bpl = min_bpl; + + if (!video->bpl_zero_padding || bpl != min_bpl) + bpl = ALIGN(bpl, video->bpl_alignment); + + pix->pixelformat = formats[i].pixelformat; + pix->bytesperline = bpl; + pix->sizeimage = pix->bytesperline * pix->height; + pix->colorspace = mbus->colorspace; + pix->field = mbus->field; + + return bpl - min_bpl; +} + +static void isp_video_pix_to_mbus(const struct v4l2_pix_format *pix, + struct v4l2_mbus_framefmt *mbus) +{ + unsigned int i; + + memset(mbus, 0, sizeof(*mbus)); + mbus->width = pix->width; + mbus->height = pix->height; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].pixelformat == pix->pixelformat) + break; + } + + if (WARN_ON(i == ARRAY_SIZE(formats))) + return; + + mbus->code = formats[i].code; + mbus->colorspace = pix->colorspace; + mbus->field = pix->field; +} + +static struct v4l2_subdev * +isp_video_remote_subdev(struct isp_video *video, u32 *pad) +{ + struct media_pad *remote; + + remote = media_entity_remote_source(&video->pad); + + if (remote == NULL || + media_entity_type(remote->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + return NULL; + + if (pad) + *pad = remote->index; + + return media_entity_to_v4l2_subdev(remote->entity); +} + +/* Return a pointer to the ISP video instance at the far end of the pipeline. */ +static struct isp_video * +isp_video_far_end(struct isp_video *video) +{ + struct media_entity_graph graph; + struct media_entity *entity = &video->video.entity; + struct media_device *mdev = entity->parent; + struct isp_video *far_end = NULL; + + mutex_lock(&mdev->graph_mutex); + media_entity_graph_walk_start(&graph, entity); + + while ((entity = media_entity_graph_walk_next(&graph))) { + if (entity == &video->video.entity) + continue; + + if (media_entity_type(entity) != MEDIA_ENT_T_DEVNODE) + continue; + + far_end = to_isp_video(media_entity_to_video_device(entity)); + if (far_end->type != video->type) + break; + + far_end = NULL; + } + + mutex_unlock(&mdev->graph_mutex); + return far_end; +} + +/* + * Validate a pipeline by checking both ends of all links for format + * discrepancies. + * + * Compute the minimum time per frame value as the maximum of time per frame + * limits reported by every block in the pipeline. + * + * Return 0 if all formats match, or -EPIPE if at least one link is found with + * different formats on its two ends. + */ +static int isp_video_validate_pipeline(struct isp_pipeline *pipe) +{ + struct isp_device *isp = pipe->output->isp; + struct v4l2_subdev_format fmt_source; + struct v4l2_subdev_format fmt_sink; + struct media_pad *pad; + struct v4l2_subdev *subdev; + int ret; + + pipe->max_rate = pipe->l3_ick; + + subdev = isp_video_remote_subdev(pipe->output, NULL); + if (subdev == NULL) + return -EPIPE; + + while (1) { + /* Retrieve the sink format */ + pad = &subdev->entity.pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + + fmt_sink.pad = pad->index; + fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_sink); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + /* Update the maximum frame rate */ + if (subdev == &isp->isp_res.subdev) + omap3isp_resizer_max_rate(&isp->isp_res, + &pipe->max_rate); + + /* Check ccdc maximum data rate when data comes from sensor + * TODO: Include ccdc rate in pipe->max_rate and compare the + * total pipe rate with the input data rate from sensor. + */ + if (subdev == &isp->isp_ccdc.subdev && pipe->input == NULL) { + unsigned int rate = UINT_MAX; + + omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate); + if (isp->isp_ccdc.vpcfg.pixelclk > rate) + return -ENOSPC; + } + + /* Retrieve the source format */ + pad = media_entity_remote_source(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + subdev = media_entity_to_v4l2_subdev(pad->entity); + + fmt_source.pad = pad->index; + fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + /* Check if the two ends match */ + if (fmt_source.format.code != fmt_sink.format.code || + fmt_source.format.width != fmt_sink.format.width || + fmt_source.format.height != fmt_sink.format.height) + return -EPIPE; + } + + return 0; +} + +static int +__isp_video_get_format(struct isp_video *video, struct v4l2_format *format) +{ + struct v4l2_subdev_format fmt; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + subdev = isp_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + + fmt.pad = pad; + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); + if (ret == -ENOIOCTLCMD) + ret = -EINVAL; + + mutex_unlock(&video->mutex); + + if (ret) + return ret; + + format->type = video->type; + return isp_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix); +} + +static int +isp_video_check_format(struct isp_video *video, struct isp_video_fh *vfh) +{ + struct v4l2_format format; + int ret; + + memcpy(&format, &vfh->format, sizeof(format)); + ret = __isp_video_get_format(video, &format); + if (ret < 0) + return ret; + + if (vfh->format.fmt.pix.pixelformat != format.fmt.pix.pixelformat || + vfh->format.fmt.pix.height != format.fmt.pix.height || + vfh->format.fmt.pix.width != format.fmt.pix.width || + vfh->format.fmt.pix.bytesperline != format.fmt.pix.bytesperline || + vfh->format.fmt.pix.sizeimage != format.fmt.pix.sizeimage) + return -EINVAL; + + return ret; +} + +/* ----------------------------------------------------------------------------- + * IOMMU management + */ + +#define IOMMU_FLAG (IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_8) + +/* + * ispmmu_vmap - Wrapper for Virtual memory mapping of a scatter gather list + * @dev: Device pointer specific to the OMAP3 ISP. + * @sglist: Pointer to source Scatter gather list to allocate. + * @sglen: Number of elements of the scatter-gatter list. + * + * Returns a resulting mapped device address by the ISP MMU, or -ENOMEM if + * we ran out of memory. + */ +static dma_addr_t +ispmmu_vmap(struct isp_device *isp, const struct scatterlist *sglist, int sglen) +{ + struct sg_table *sgt; + u32 da; + + sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); + if (sgt == NULL) + return -ENOMEM; + + sgt->sgl = (struct scatterlist *)sglist; + sgt->nents = sglen; + sgt->orig_nents = sglen; + + da = iommu_vmap(isp->iommu, 0, sgt, IOMMU_FLAG); + if (IS_ERR_VALUE(da)) + kfree(sgt); + + return da; +} + +/* + * ispmmu_vunmap - Unmap a device address from the ISP MMU + * @dev: Device pointer specific to the OMAP3 ISP. + * @da: Device address generated from a ispmmu_vmap call. + */ +static void ispmmu_vunmap(struct isp_device *isp, dma_addr_t da) +{ + struct sg_table *sgt; + + sgt = iommu_vunmap(isp->iommu, (u32)da); + kfree(sgt); +} + +/* ----------------------------------------------------------------------------- + * Video queue operations + */ + +static void isp_video_queue_prepare(struct isp_video_queue *queue, + unsigned int *nbuffers, unsigned int *size) +{ + struct isp_video_fh *vfh = + container_of(queue, struct isp_video_fh, queue); + struct isp_video *video = vfh->video; + + *size = vfh->format.fmt.pix.sizeimage; + if (*size == 0) + return; + + *nbuffers = min(*nbuffers, video->capture_mem / PAGE_ALIGN(*size)); +} + +static void isp_video_buffer_cleanup(struct isp_video_buffer *buf) +{ + struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue); + struct isp_buffer *buffer = to_isp_buffer(buf); + struct isp_video *video = vfh->video; + + if (buffer->isp_addr) { + ispmmu_vunmap(video->isp, buffer->isp_addr); + buffer->isp_addr = 0; + } +} + +static int isp_video_buffer_prepare(struct isp_video_buffer *buf) +{ + struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue); + struct isp_buffer *buffer = to_isp_buffer(buf); + struct isp_video *video = vfh->video; + unsigned long addr; + + addr = ispmmu_vmap(video->isp, buf->sglist, buf->sglen); + if (IS_ERR_VALUE(addr)) + return -EIO; + + if (!IS_ALIGNED(addr, 32)) { + dev_dbg(video->isp->dev, "Buffer address must be " + "aligned to 32 bytes boundary.\n"); + ispmmu_vunmap(video->isp, buffer->isp_addr); + return -EINVAL; + } + + buf->vbuf.bytesused = vfh->format.fmt.pix.sizeimage; + buffer->isp_addr = addr; + return 0; +} + +/* + * isp_video_buffer_queue - Add buffer to streaming queue + * @buf: Video buffer + * + * In memory-to-memory mode, start streaming on the pipeline if buffers are + * queued on both the input and the output, if the pipeline isn't already busy. + * If the pipeline is busy, it will be restarted in the output module interrupt + * handler. + */ +static void isp_video_buffer_queue(struct isp_video_buffer *buf) +{ + struct isp_video_fh *vfh = isp_video_queue_to_isp_video_fh(buf->queue); + struct isp_buffer *buffer = to_isp_buffer(buf); + struct isp_video *video = vfh->video; + struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity); + enum isp_pipeline_state state; + unsigned long flags; + unsigned int empty; + unsigned int start; + + empty = list_empty(&video->dmaqueue); + list_add_tail(&buffer->buffer.irqlist, &video->dmaqueue); + + if (empty) { + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISP_PIPELINE_QUEUE_OUTPUT; + else + state = ISP_PIPELINE_QUEUE_INPUT; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state |= state; + video->ops->queue(video, buffer); + video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_QUEUED; + + start = isp_pipeline_ready(pipe); + if (start) + pipe->state |= ISP_PIPELINE_STREAM; + spin_unlock_irqrestore(&pipe->lock, flags); + + if (start) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + } +} + +static const struct isp_video_queue_operations isp_video_queue_ops = { + .queue_prepare = &isp_video_queue_prepare, + .buffer_prepare = &isp_video_buffer_prepare, + .buffer_queue = &isp_video_buffer_queue, + .buffer_cleanup = &isp_video_buffer_cleanup, +}; + +/* + * omap3isp_video_buffer_next - Complete the current buffer and return the next + * @video: ISP video object + * @error: Whether an error occured during capture + * + * Remove the current video buffer from the DMA queue and fill its timestamp, + * field count and state fields before waking up its completion handler. + * + * The buffer state is set to VIDEOBUF_DONE if no error occured (@error is 0) + * or VIDEOBUF_ERROR otherwise (@error is non-zero). + * + * The DMA queue is expected to contain at least one buffer. + * + * Return a pointer to the next buffer in the DMA queue, or NULL if the queue is + * empty. + */ +struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video, + unsigned int error) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity); + struct isp_video_queue *queue = video->queue; + enum isp_pipeline_state state; + struct isp_video_buffer *buf; + unsigned long flags; + struct timespec ts; + + spin_lock_irqsave(&queue->irqlock, flags); + if (WARN_ON(list_empty(&video->dmaqueue))) { + spin_unlock_irqrestore(&queue->irqlock, flags); + return NULL; + } + + buf = list_first_entry(&video->dmaqueue, struct isp_video_buffer, + irqlist); + list_del(&buf->irqlist); + spin_unlock_irqrestore(&queue->irqlock, flags); + + ktime_get_ts(&ts); + buf->vbuf.timestamp.tv_sec = ts.tv_sec; + buf->vbuf.timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC; + + /* Do frame number propagation only if this is the output video node. + * Frame number either comes from the CSI receivers or it gets + * incremented here if H3A is not active. + * Note: There is no guarantee that the output buffer will finish + * first, so the input number might lag behind by 1 in some cases. + */ + if (video == pipe->output && !pipe->do_propagation) + buf->vbuf.sequence = atomic_inc_return(&pipe->frame_number); + else + buf->vbuf.sequence = atomic_read(&pipe->frame_number); + + buf->state = error ? ISP_BUF_STATE_ERROR : ISP_BUF_STATE_DONE; + + wake_up(&buf->wait); + + if (list_empty(&video->dmaqueue)) { + if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISP_PIPELINE_QUEUE_OUTPUT + | ISP_PIPELINE_STREAM; + else + state = ISP_PIPELINE_QUEUE_INPUT + | ISP_PIPELINE_STREAM; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~state; + if (video->pipe.stream_state == ISP_PIPELINE_STREAM_CONTINUOUS) + video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN; + spin_unlock_irqrestore(&pipe->lock, flags); + return NULL; + } + + if (queue->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && pipe->input != NULL) { + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~ISP_PIPELINE_STREAM; + spin_unlock_irqrestore(&pipe->lock, flags); + } + + buf = list_first_entry(&video->dmaqueue, struct isp_video_buffer, + irqlist); + buf->state = ISP_BUF_STATE_ACTIVE; + return to_isp_buffer(buf); +} + +/* + * omap3isp_video_resume - Perform resume operation on the buffers + * @video: ISP video object + * @continuous: Pipeline is in single shot mode if 0 or continous mode otherwise + * + * This function is intended to be used on suspend/resume scenario. It + * requests video queue layer to discard buffers marked as DONE if it's in + * continuous mode and requests ISP modules to queue again the ACTIVE buffer + * if there's any. + */ +void omap3isp_video_resume(struct isp_video *video, int continuous) +{ + struct isp_buffer *buf = NULL; + + if (continuous && video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + omap3isp_video_queue_discard_done(video->queue); + + if (!list_empty(&video->dmaqueue)) { + buf = list_first_entry(&video->dmaqueue, + struct isp_buffer, buffer.irqlist); + video->ops->queue(video, buf); + video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_QUEUED; + } else { + if (continuous) + video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN; + } +} + +/* ----------------------------------------------------------------------------- + * V4L2 ioctls + */ + +static int +isp_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap) +{ + struct isp_video *video = video_drvdata(file); + + strlcpy(cap->driver, ISP_VIDEO_DRIVER_NAME, sizeof(cap->driver)); + strlcpy(cap->card, video->video.name, sizeof(cap->card)); + strlcpy(cap->bus_info, "media", sizeof(cap->bus_info)); + cap->version = ISP_VIDEO_DRIVER_VERSION; + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + else + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + + return 0; +} + +static int +isp_video_get_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + + if (format->type != video->type) + return -EINVAL; + + mutex_lock(&video->mutex); + *format = vfh->format; + mutex_unlock(&video->mutex); + + return 0; +} + +static int +isp_video_set_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + struct v4l2_mbus_framefmt fmt; + + if (format->type != video->type) + return -EINVAL; + + mutex_lock(&video->mutex); + + /* Fill the bytesperline and sizeimage fields by converting to media bus + * format and back to pixel format. + */ + isp_video_pix_to_mbus(&format->fmt.pix, &fmt); + isp_video_mbus_to_pix(video, &fmt, &format->fmt.pix); + + vfh->format = *format; + + mutex_unlock(&video->mutex); + return 0; +} + +static int +isp_video_try_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct isp_video *video = video_drvdata(file); + struct v4l2_subdev_format fmt; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + if (format->type != video->type) + return -EINVAL; + + subdev = isp_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + isp_video_pix_to_mbus(&format->fmt.pix, &fmt.format); + + fmt.pad = pad; + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); + if (ret) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + isp_video_mbus_to_pix(video, &fmt.format, &format->fmt.pix); + return 0; +} + +static int +isp_video_cropcap(struct file *file, void *fh, struct v4l2_cropcap *cropcap) +{ + struct isp_video *video = video_drvdata(file); + struct v4l2_subdev *subdev; + int ret; + + subdev = isp_video_remote_subdev(video, NULL); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, video, cropcap, cropcap); + mutex_unlock(&video->mutex); + + return ret == -ENOIOCTLCMD ? -EINVAL : ret; +} + +static int +isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct isp_video *video = video_drvdata(file); + struct v4l2_subdev_format format; + struct v4l2_subdev *subdev; + u32 pad; + int ret; + + subdev = isp_video_remote_subdev(video, &pad); + if (subdev == NULL) + return -EINVAL; + + /* Try the get crop operation first and fallback to get format if not + * implemented. + */ + ret = v4l2_subdev_call(subdev, video, g_crop, crop); + if (ret != -ENOIOCTLCMD) + return ret; + + format.pad = pad; + format.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &format); + if (ret < 0) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + crop->c.left = 0; + crop->c.top = 0; + crop->c.width = format.format.width; + crop->c.height = format.format.height; + + return 0; +} + +static int +isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop) +{ + struct isp_video *video = video_drvdata(file); + struct v4l2_subdev *subdev; + int ret; + + subdev = isp_video_remote_subdev(video, NULL); + if (subdev == NULL) + return -EINVAL; + + mutex_lock(&video->mutex); + ret = v4l2_subdev_call(subdev, video, s_crop, crop); + mutex_unlock(&video->mutex); + + return ret == -ENOIOCTLCMD ? -EINVAL : ret; +} + +static int +isp_video_get_param(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + + if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || + video->type != a->type) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + a->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + a->parm.output.capability = V4L2_CAP_TIMEPERFRAME; + a->parm.output.timeperframe = vfh->timeperframe; + + return 0; +} + +static int +isp_video_set_param(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + + if (video->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || + video->type != a->type) + return -EINVAL; + + if (a->parm.output.timeperframe.denominator == 0) + a->parm.output.timeperframe.denominator = 1; + + vfh->timeperframe = a->parm.output.timeperframe; + + return 0; +} + +static int +isp_video_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + + return omap3isp_video_queue_reqbufs(&vfh->queue, rb); +} + +static int +isp_video_querybuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + + return omap3isp_video_queue_querybuf(&vfh->queue, b); +} + +static int +isp_video_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + + return omap3isp_video_queue_qbuf(&vfh->queue, b); +} + +static int +isp_video_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + + return omap3isp_video_queue_dqbuf(&vfh->queue, b, + file->f_flags & O_NONBLOCK); +} + +/* + * Stream management + * + * Every ISP pipeline has a single input and a single output. The input can be + * either a sensor or a video node. The output is always a video node. + * + * As every pipeline has an output video node, the ISP video objects at the + * pipeline output stores the pipeline state. It tracks the streaming state of + * both the input and output, as well as the availability of buffers. + * + * In sensor-to-memory mode, frames are always available at the pipeline input. + * Starting the sensor usually requires I2C transfers and must be done in + * interruptible context. The pipeline is started and stopped synchronously + * to the stream on/off commands. All modules in the pipeline will get their + * subdev set stream handler called. The module at the end of the pipeline must + * delay starting the hardware until buffers are available at its output. + * + * In memory-to-memory mode, starting/stopping the stream requires + * synchronization between the input and output. ISP modules can't be stopped + * in the middle of a frame, and at least some of the modules seem to become + * busy as soon as they're started, even if they don't receive a frame start + * event. For that reason frames need to be processed in single-shot mode. The + * driver needs to wait until a frame is completely processed and written to + * memory before restarting the pipeline for the next frame. Pipelined + * processing might be possible but requires more testing. + * + * Stream start must be delayed until buffers are available at both the input + * and output. The pipeline must be started in the videobuf queue callback with + * the buffers queue spinlock held. The modules subdev set stream operation must + * not sleep. + */ +static int +isp_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + enum isp_pipeline_state state; + struct isp_pipeline *pipe; + struct isp_video *far_end; + unsigned long flags; + int ret; + + if (type != video->type) + return -EINVAL; + + mutex_lock(&video->stream_lock); + + if (video->streaming) { + mutex_unlock(&video->stream_lock); + return -EBUSY; + } + + /* Start streaming on the pipeline. No link touching an entity in the + * pipeline can be activated or deactivated once streaming is started. + */ + pipe = video->video.entity.pipe + ? to_isp_pipeline(&video->video.entity) : &video->pipe; + media_entity_pipeline_start(&video->video.entity, &pipe->pipe); + + /* Verify that the currently configured format matches the output of + * the connected subdev. + */ + ret = isp_video_check_format(video, vfh); + if (ret < 0) + goto error; + + video->bpl_padding = ret; + video->bpl_value = vfh->format.fmt.pix.bytesperline; + + /* Find the ISP video node connected at the far end of the pipeline and + * update the pipeline. + */ + far_end = isp_video_far_end(video); + + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + state = ISP_PIPELINE_STREAM_OUTPUT | ISP_PIPELINE_IDLE_OUTPUT; + pipe->input = far_end; + pipe->output = video; + } else { + if (far_end == NULL) { + ret = -EPIPE; + goto error; + } + + state = ISP_PIPELINE_STREAM_INPUT | ISP_PIPELINE_IDLE_INPUT; + pipe->input = video; + pipe->output = far_end; + } + + if (video->isp->pdata->set_constraints) + video->isp->pdata->set_constraints(video->isp, true); + pipe->l3_ick = clk_get_rate(video->isp->clock[ISP_CLK_L3_ICK]); + + /* Validate the pipeline and update its state. */ + ret = isp_video_validate_pipeline(pipe); + if (ret < 0) + goto error; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~ISP_PIPELINE_STREAM; + pipe->state |= state; + spin_unlock_irqrestore(&pipe->lock, flags); + + /* Set the maximum time per frame as the value requested by userspace. + * This is a soft limit that can be overridden if the hardware doesn't + * support the request limit. + */ + if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + pipe->max_timeperframe = vfh->timeperframe; + + video->queue = &vfh->queue; + INIT_LIST_HEAD(&video->dmaqueue); + atomic_set(&pipe->frame_number, -1); + + ret = omap3isp_video_queue_streamon(&vfh->queue); + if (ret < 0) + goto error; + + /* In sensor-to-memory mode, the stream can be started synchronously + * to the stream on command. In memory-to-memory mode, it will be + * started when buffers are queued on both the input and output. + */ + if (pipe->input == NULL) { + ret = omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_CONTINUOUS); + if (ret < 0) + goto error; + spin_lock_irqsave(&video->queue->irqlock, flags); + if (list_empty(&video->dmaqueue)) + video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN; + spin_unlock_irqrestore(&video->queue->irqlock, flags); + } + +error: + if (ret < 0) { + omap3isp_video_queue_streamoff(&vfh->queue); + if (video->isp->pdata->set_constraints) + video->isp->pdata->set_constraints(video->isp, false); + media_entity_pipeline_stop(&video->video.entity); + video->queue = NULL; + } + + if (!ret) + video->streaming = 1; + + mutex_unlock(&video->stream_lock); + return ret; +} + +static int +isp_video_streamoff(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct isp_video_fh *vfh = to_isp_video_fh(fh); + struct isp_video *video = video_drvdata(file); + struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity); + enum isp_pipeline_state state; + unsigned int streaming; + unsigned long flags; + + if (type != video->type) + return -EINVAL; + + mutex_lock(&video->stream_lock); + + /* Make sure we're not streaming yet. */ + mutex_lock(&vfh->queue.lock); + streaming = vfh->queue.streaming; + mutex_unlock(&vfh->queue.lock); + + if (!streaming) + goto done; + + /* Update the pipeline state. */ + if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + state = ISP_PIPELINE_STREAM_OUTPUT + | ISP_PIPELINE_QUEUE_OUTPUT; + else + state = ISP_PIPELINE_STREAM_INPUT + | ISP_PIPELINE_QUEUE_INPUT; + + spin_lock_irqsave(&pipe->lock, flags); + pipe->state &= ~state; + spin_unlock_irqrestore(&pipe->lock, flags); + + /* Stop the stream. */ + omap3isp_pipeline_set_stream(pipe, ISP_PIPELINE_STREAM_STOPPED); + omap3isp_video_queue_streamoff(&vfh->queue); + video->queue = NULL; + video->streaming = 0; + + if (video->isp->pdata->set_constraints) + video->isp->pdata->set_constraints(video->isp, false); + media_entity_pipeline_stop(&video->video.entity); + +done: + mutex_unlock(&video->stream_lock); + return 0; +} + +static int +isp_video_enum_input(struct file *file, void *fh, struct v4l2_input *input) +{ + if (input->index > 0) + return -EINVAL; + + strlcpy(input->name, "camera", sizeof(input->name)); + input->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +static int +isp_video_g_input(struct file *file, void *fh, unsigned int *input) +{ + *input = 0; + + return 0; +} + +static int +isp_video_s_input(struct file *file, void *fh, unsigned int input) +{ + return input == 0 ? 0 : -EINVAL; +} + +static const struct v4l2_ioctl_ops isp_video_ioctl_ops = { + .vidioc_querycap = isp_video_querycap, + .vidioc_g_fmt_vid_cap = isp_video_get_format, + .vidioc_s_fmt_vid_cap = isp_video_set_format, + .vidioc_try_fmt_vid_cap = isp_video_try_format, + .vidioc_g_fmt_vid_out = isp_video_get_format, + .vidioc_s_fmt_vid_out = isp_video_set_format, + .vidioc_try_fmt_vid_out = isp_video_try_format, + .vidioc_cropcap = isp_video_cropcap, + .vidioc_g_crop = isp_video_get_crop, + .vidioc_s_crop = isp_video_set_crop, + .vidioc_g_parm = isp_video_get_param, + .vidioc_s_parm = isp_video_set_param, + .vidioc_reqbufs = isp_video_reqbufs, + .vidioc_querybuf = isp_video_querybuf, + .vidioc_qbuf = isp_video_qbuf, + .vidioc_dqbuf = isp_video_dqbuf, + .vidioc_streamon = isp_video_streamon, + .vidioc_streamoff = isp_video_streamoff, + .vidioc_enum_input = isp_video_enum_input, + .vidioc_g_input = isp_video_g_input, + .vidioc_s_input = isp_video_s_input, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 file operations + */ + +static int isp_video_open(struct file *file) +{ + struct isp_video *video = video_drvdata(file); + struct isp_video_fh *handle; + int ret = 0; + + handle = kzalloc(sizeof(*handle), GFP_KERNEL); + if (handle == NULL) + return -ENOMEM; + + v4l2_fh_init(&handle->vfh, &video->video); + v4l2_fh_add(&handle->vfh); + + /* If this is the first user, initialise the pipeline. */ + if (omap3isp_get(video->isp) == NULL) { + ret = -EBUSY; + goto done; + } + + ret = omap3isp_pipeline_pm_use(&video->video.entity, 1); + if (ret < 0) { + omap3isp_put(video->isp); + goto done; + } + + omap3isp_video_queue_init(&handle->queue, video->type, + &isp_video_queue_ops, video->isp->dev, + sizeof(struct isp_buffer)); + + memset(&handle->format, 0, sizeof(handle->format)); + handle->format.type = video->type; + handle->timeperframe.denominator = 1; + + handle->video = video; + file->private_data = &handle->vfh; + +done: + if (ret < 0) { + v4l2_fh_del(&handle->vfh); + kfree(handle); + } + + return ret; +} + +static int isp_video_release(struct file *file) +{ + struct isp_video *video = video_drvdata(file); + struct v4l2_fh *vfh = file->private_data; + struct isp_video_fh *handle = to_isp_video_fh(vfh); + + /* Disable streaming and free the buffers queue resources. */ + isp_video_streamoff(file, vfh, video->type); + + mutex_lock(&handle->queue.lock); + omap3isp_video_queue_cleanup(&handle->queue); + mutex_unlock(&handle->queue.lock); + + omap3isp_pipeline_pm_use(&video->video.entity, 0); + + /* Release the file handle. */ + v4l2_fh_del(vfh); + kfree(handle); + file->private_data = NULL; + + omap3isp_put(video->isp); + + return 0; +} + +static unsigned int isp_video_poll(struct file *file, poll_table *wait) +{ + struct isp_video_fh *vfh = to_isp_video_fh(file->private_data); + struct isp_video_queue *queue = &vfh->queue; + + return omap3isp_video_queue_poll(queue, file, wait); +} + +static int isp_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct isp_video_fh *vfh = to_isp_video_fh(file->private_data); + + return omap3isp_video_queue_mmap(&vfh->queue, vma); +} + +static struct v4l2_file_operations isp_video_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = isp_video_open, + .release = isp_video_release, + .poll = isp_video_poll, + .mmap = isp_video_mmap, +}; + +/* ----------------------------------------------------------------------------- + * ISP video core + */ + +static const struct isp_video_operations isp_video_dummy_ops = { +}; + +int omap3isp_video_init(struct isp_video *video, const char *name) +{ + const char *direction; + int ret; + + switch (video->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + direction = "output"; + video->pad.flags = MEDIA_PAD_FL_SINK; + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + direction = "input"; + video->pad.flags = MEDIA_PAD_FL_SOURCE; + break; + + default: + return -EINVAL; + } + + ret = media_entity_init(&video->video.entity, 1, &video->pad, 0); + if (ret < 0) + return ret; + + mutex_init(&video->mutex); + atomic_set(&video->active, 0); + + spin_lock_init(&video->pipe.lock); + mutex_init(&video->stream_lock); + + /* Initialize the video device. */ + if (video->ops == NULL) + video->ops = &isp_video_dummy_ops; + + video->video.fops = &isp_video_fops; + snprintf(video->video.name, sizeof(video->video.name), + "OMAP3 ISP %s %s", name, direction); + video->video.vfl_type = VFL_TYPE_GRABBER; + video->video.release = video_device_release_empty; + video->video.ioctl_ops = &isp_video_ioctl_ops; + video->pipe.stream_state = ISP_PIPELINE_STREAM_STOPPED; + + video_set_drvdata(&video->video, video); + + return 0; +} + +int omap3isp_video_register(struct isp_video *video, struct v4l2_device *vdev) +{ + int ret; + + video->video.v4l2_dev = vdev; + + ret = video_register_device(&video->video, VFL_TYPE_GRABBER, -1); + if (ret < 0) + printk(KERN_ERR "%s: could not register video device (%d)\n", + __func__, ret); + + return ret; +} + +void omap3isp_video_unregister(struct isp_video *video) +{ + if (video_is_registered(&video->video)) { + media_entity_cleanup(&video->video.entity); + video_unregister_device(&video->video); + } +} diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h new file mode 100644 index 000000000000..524a1acd0906 --- /dev/null +++ b/drivers/media/video/omap3isp/ispvideo.h @@ -0,0 +1,202 @@ +/* + * ispvideo.h + * + * TI OMAP3 ISP - Generic video node + * + * Copyright (C) 2009-2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_VIDEO_H +#define OMAP3_ISP_VIDEO_H + +#include <linux/v4l2-mediabus.h> +#include <linux/version.h> +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> + +#include "ispqueue.h" + +#define ISP_VIDEO_DRIVER_NAME "ispvideo" +#define ISP_VIDEO_DRIVER_VERSION KERNEL_VERSION(0, 0, 1) + +struct isp_device; +struct isp_video; +struct v4l2_mbus_framefmt; +struct v4l2_pix_format; + +/* + * struct isp_format_info - ISP media bus format information + * @code: V4L2 media bus format code + * @truncated: V4L2 media bus format code for the same format truncated to 10 + * bits. Identical to @code if the format is 10 bits wide or less. + * @uncompressed: V4L2 media bus format code for the corresponding uncompressed + * format. Identical to @code if the format is not DPCM compressed. + * @pixelformat: V4L2 pixel format FCC identifier + * @bpp: Bits per pixel + */ +struct isp_format_info { + enum v4l2_mbus_pixelcode code; + enum v4l2_mbus_pixelcode truncated; + enum v4l2_mbus_pixelcode uncompressed; + u32 pixelformat; + unsigned int bpp; +}; + +enum isp_pipeline_stream_state { + ISP_PIPELINE_STREAM_STOPPED = 0, + ISP_PIPELINE_STREAM_CONTINUOUS = 1, + ISP_PIPELINE_STREAM_SINGLESHOT = 2, +}; + +enum isp_pipeline_state { + /* The stream has been started on the input video node. */ + ISP_PIPELINE_STREAM_INPUT = 1, + /* The stream has been started on the output video node. */ + ISP_PIPELINE_STREAM_OUTPUT = 2, + /* At least one buffer is queued on the input video node. */ + ISP_PIPELINE_QUEUE_INPUT = 4, + /* At least one buffer is queued on the output video node. */ + ISP_PIPELINE_QUEUE_OUTPUT = 8, + /* The input entity is idle, ready to be started. */ + ISP_PIPELINE_IDLE_INPUT = 16, + /* The output entity is idle, ready to be started. */ + ISP_PIPELINE_IDLE_OUTPUT = 32, + /* The pipeline is currently streaming. */ + ISP_PIPELINE_STREAM = 64, +}; + +struct isp_pipeline { + struct media_pipeline pipe; + spinlock_t lock; /* Pipeline state and queue flags */ + unsigned int state; + enum isp_pipeline_stream_state stream_state; + struct isp_video *input; + struct isp_video *output; + unsigned long l3_ick; + unsigned int max_rate; + atomic_t frame_number; + bool do_propagation; /* of frame number */ + struct v4l2_fract max_timeperframe; +}; + +#define to_isp_pipeline(__e) \ + container_of((__e)->pipe, struct isp_pipeline, pipe) + +static inline int isp_pipeline_ready(struct isp_pipeline *pipe) +{ + return pipe->state == (ISP_PIPELINE_STREAM_INPUT | + ISP_PIPELINE_STREAM_OUTPUT | + ISP_PIPELINE_QUEUE_INPUT | + ISP_PIPELINE_QUEUE_OUTPUT | + ISP_PIPELINE_IDLE_INPUT | + ISP_PIPELINE_IDLE_OUTPUT); +} + +/* + * struct isp_buffer - ISP buffer + * @buffer: ISP video buffer + * @isp_addr: MMU mapped address (a.k.a. device address) of the buffer. + */ +struct isp_buffer { + struct isp_video_buffer buffer; + dma_addr_t isp_addr; +}; + +#define to_isp_buffer(buf) container_of(buf, struct isp_buffer, buffer) + +enum isp_video_dmaqueue_flags { + /* Set if DMA queue becomes empty when ISP_PIPELINE_STREAM_CONTINUOUS */ + ISP_VIDEO_DMAQUEUE_UNDERRUN = (1 << 0), + /* Set when queuing buffer to an empty DMA queue */ + ISP_VIDEO_DMAQUEUE_QUEUED = (1 << 1), +}; + +#define isp_video_dmaqueue_flags_clr(video) \ + ({ (video)->dmaqueue_flags = 0; }) + +/* + * struct isp_video_operations - ISP video operations + * @queue: Resume streaming when a buffer is queued. Called on VIDIOC_QBUF + * if there was no buffer previously queued. + */ +struct isp_video_operations { + int(*queue)(struct isp_video *video, struct isp_buffer *buffer); +}; + +struct isp_video { + struct video_device video; + enum v4l2_buf_type type; + struct media_pad pad; + + struct mutex mutex; /* format and crop settings */ + atomic_t active; + + struct isp_device *isp; + + unsigned int capture_mem; + unsigned int bpl_alignment; /* alignment value */ + unsigned int bpl_zero_padding; /* whether the alignment is optional */ + unsigned int bpl_max; /* maximum bytes per line value */ + unsigned int bpl_value; /* bytes per line value */ + unsigned int bpl_padding; /* padding at end of line */ + + /* Entity video node streaming */ + unsigned int streaming:1; + + /* Pipeline state */ + struct isp_pipeline pipe; + struct mutex stream_lock; /* pipeline and stream states */ + + /* Video buffers queue */ + struct isp_video_queue *queue; + struct list_head dmaqueue; + enum isp_video_dmaqueue_flags dmaqueue_flags; + + const struct isp_video_operations *ops; +}; + +#define to_isp_video(vdev) container_of(vdev, struct isp_video, video) + +struct isp_video_fh { + struct v4l2_fh vfh; + struct isp_video *video; + struct isp_video_queue queue; + struct v4l2_format format; + struct v4l2_fract timeperframe; +}; + +#define to_isp_video_fh(fh) container_of(fh, struct isp_video_fh, vfh) +#define isp_video_queue_to_isp_video_fh(q) \ + container_of(q, struct isp_video_fh, queue) + +int omap3isp_video_init(struct isp_video *video, const char *name); +int omap3isp_video_register(struct isp_video *video, + struct v4l2_device *vdev); +void omap3isp_video_unregister(struct isp_video *video); +struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video, + unsigned int error); +void omap3isp_video_resume(struct isp_video *video, int continuous); +struct media_pad *omap3isp_video_remote_pad(struct isp_video *video); + +const struct isp_format_info * +omap3isp_video_format_info(enum v4l2_mbus_pixelcode code); + +#endif /* OMAP3_ISP_VIDEO_H */ diff --git a/drivers/media/video/omap3isp/luma_enhance_table.h b/drivers/media/video/omap3isp/luma_enhance_table.h new file mode 100644 index 000000000000..098b45e2280f --- /dev/null +++ b/drivers/media/video/omap3isp/luma_enhance_table.h @@ -0,0 +1,42 @@ +/* + * luma_enhance_table.h + * + * TI OMAP3 ISP - Luminance enhancement table + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, +1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, +1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, 1047552, +1047552, 1047552, 1047552, 1047552, 1048575, 1047551, 1046527, 1045503, +1044479, 1043455, 1042431, 1041407, 1040383, 1039359, 1038335, 1037311, +1036287, 1035263, 1034239, 1033215, 1032191, 1031167, 1030143, 1028096, +1028096, 1028096, 1028096, 1028096, 1028096, 1028096, 1028096, 1028096, +1028096, 1028100, 1032196, 1036292, 1040388, 1044484, 0, 0, + 0, 5, 5125, 10245, 15365, 20485, 25605, 30720, + 30720, 30720, 30720, 30720, 30720, 30720, 30720, 30720, + 30720, 30720, 31743, 30719, 29695, 28671, 27647, 26623, + 25599, 24575, 23551, 22527, 21503, 20479, 19455, 18431, + 17407, 16383, 15359, 14335, 13311, 12287, 11263, 10239, + 9215, 8191, 7167, 6143, 5119, 4095, 3071, 1024, + 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, + 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024 diff --git a/drivers/media/video/omap3isp/noise_filter_table.h b/drivers/media/video/omap3isp/noise_filter_table.h new file mode 100644 index 000000000000..d50451a4a242 --- /dev/null +++ b/drivers/media/video/omap3isp/noise_filter_table.h @@ -0,0 +1,30 @@ +/* + * noise_filter_table.h + * + * TI OMAP3 ISP - Noise filter table + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, +16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, +31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, +31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, 31 diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index cf93de988068..fe8e3ebd9ce4 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -207,7 +207,7 @@ static enum v4l2_mbus_pixelcode ov6650_codes[] = { V4L2_MBUS_FMT_YVYU8_2X8, V4L2_MBUS_FMT_VYUY8_2X8, V4L2_MBUS_FMT_SBGGR8_1X8, - V4L2_MBUS_FMT_GREY8_1X8, + V4L2_MBUS_FMT_Y8_1X8, }; static const struct v4l2_queryctrl ov6650_controls[] = { @@ -800,7 +800,7 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) /* select color matrix configuration for given color encoding */ switch (code) { - case V4L2_MBUS_FMT_GREY8_1X8: + case V4L2_MBUS_FMT_Y8_1X8: dev_dbg(&client->dev, "pixel format GREY8_1X8\n"); coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP; coma_set |= COMA_BW; @@ -846,7 +846,7 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) } priv->code = code; - if (code == V4L2_MBUS_FMT_GREY8_1X8 || + if (code == V4L2_MBUS_FMT_Y8_1X8 || code == V4L2_MBUS_FMT_SBGGR8_1X8) { coml_mask = COML_ONE_CHANNEL; coml_set = 0; @@ -936,8 +936,8 @@ static int ov6650_try_fmt(struct v4l2_subdev *sd, switch (mf->code) { case V4L2_MBUS_FMT_Y10_1X10: - mf->code = V4L2_MBUS_FMT_GREY8_1X8; - case V4L2_MBUS_FMT_GREY8_1X8: + mf->code = V4L2_MBUS_FMT_Y8_1X8; + case V4L2_MBUS_FMT_Y8_1X8: case V4L2_MBUS_FMT_YVYU8_2X8: case V4L2_MBUS_FMT_YUYV8_2X8: case V4L2_MBUS_FMT_VYUY8_2X8: diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c new file mode 100644 index 000000000000..4d4ee4faca69 --- /dev/null +++ b/drivers/media/video/ov9740.c @@ -0,0 +1,1009 @@ +/* + * OmniVision OV9740 Camera Driver + * + * Copyright (C) 2011 NVIDIA Corporation + * + * Based on ov9640 camera driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <media/v4l2-chip-ident.h> +#include <media/soc_camera.h> + +#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev) + +/* General Status Registers */ +#define OV9740_MODEL_ID_HI 0x0000 +#define OV9740_MODEL_ID_LO 0x0001 +#define OV9740_REVISION_NUMBER 0x0002 +#define OV9740_MANUFACTURER_ID 0x0003 +#define OV9740_SMIA_VERSION 0x0004 + +/* General Setup Registers */ +#define OV9740_MODE_SELECT 0x0100 +#define OV9740_IMAGE_ORT 0x0101 +#define OV9740_SOFTWARE_RESET 0x0103 +#define OV9740_GRP_PARAM_HOLD 0x0104 +#define OV9740_MSK_CORRUP_FM 0x0105 + +/* Timing Setting */ +#define OV9740_FRM_LENGTH_LN_HI 0x0340 /* VTS */ +#define OV9740_FRM_LENGTH_LN_LO 0x0341 /* VTS */ +#define OV9740_LN_LENGTH_PCK_HI 0x0342 /* HTS */ +#define OV9740_LN_LENGTH_PCK_LO 0x0343 /* HTS */ +#define OV9740_X_ADDR_START_HI 0x0344 +#define OV9740_X_ADDR_START_LO 0x0345 +#define OV9740_Y_ADDR_START_HI 0x0346 +#define OV9740_Y_ADDR_START_LO 0x0347 +#define OV9740_X_ADDR_END_HI 0x0348 +#define OV9740_X_ADDR_END_LO 0x0349 +#define OV9740_Y_ADDR_END_HI 0x034A +#define OV9740_Y_ADDR_END_LO 0x034B +#define OV9740_X_OUTPUT_SIZE_HI 0x034C +#define OV9740_X_OUTPUT_SIZE_LO 0x034D +#define OV9740_Y_OUTPUT_SIZE_HI 0x034E +#define OV9740_Y_OUTPUT_SIZE_LO 0x034F + +/* IO Control Registers */ +#define OV9740_IO_CREL00 0x3002 +#define OV9740_IO_CREL01 0x3004 +#define OV9740_IO_CREL02 0x3005 +#define OV9740_IO_OUTPUT_SEL01 0x3026 +#define OV9740_IO_OUTPUT_SEL02 0x3027 + +/* AWB Registers */ +#define OV9740_AWB_MANUAL_CTRL 0x3406 + +/* Analog Control Registers */ +#define OV9740_ANALOG_CTRL01 0x3601 +#define OV9740_ANALOG_CTRL02 0x3602 +#define OV9740_ANALOG_CTRL03 0x3603 +#define OV9740_ANALOG_CTRL04 0x3604 +#define OV9740_ANALOG_CTRL10 0x3610 +#define OV9740_ANALOG_CTRL12 0x3612 +#define OV9740_ANALOG_CTRL20 0x3620 +#define OV9740_ANALOG_CTRL21 0x3621 +#define OV9740_ANALOG_CTRL22 0x3622 +#define OV9740_ANALOG_CTRL30 0x3630 +#define OV9740_ANALOG_CTRL31 0x3631 +#define OV9740_ANALOG_CTRL32 0x3632 +#define OV9740_ANALOG_CTRL33 0x3633 + +/* Sensor Control */ +#define OV9740_SENSOR_CTRL03 0x3703 +#define OV9740_SENSOR_CTRL04 0x3704 +#define OV9740_SENSOR_CTRL05 0x3705 +#define OV9740_SENSOR_CTRL07 0x3707 + +/* Timing Control */ +#define OV9740_TIMING_CTRL17 0x3817 +#define OV9740_TIMING_CTRL19 0x3819 +#define OV9740_TIMING_CTRL33 0x3833 +#define OV9740_TIMING_CTRL35 0x3835 + +/* Banding Filter */ +#define OV9740_AEC_MAXEXPO_60_H 0x3A02 +#define OV9740_AEC_MAXEXPO_60_L 0x3A03 +#define OV9740_AEC_B50_STEP_HI 0x3A08 +#define OV9740_AEC_B50_STEP_LO 0x3A09 +#define OV9740_AEC_B60_STEP_HI 0x3A0A +#define OV9740_AEC_B60_STEP_LO 0x3A0B +#define OV9740_AEC_CTRL0D 0x3A0D +#define OV9740_AEC_CTRL0E 0x3A0E +#define OV9740_AEC_MAXEXPO_50_H 0x3A14 +#define OV9740_AEC_MAXEXPO_50_L 0x3A15 + +/* AEC/AGC Control */ +#define OV9740_AEC_ENABLE 0x3503 +#define OV9740_GAIN_CEILING_01 0x3A18 +#define OV9740_GAIN_CEILING_02 0x3A19 +#define OV9740_AEC_HI_THRESHOLD 0x3A11 +#define OV9740_AEC_3A1A 0x3A1A +#define OV9740_AEC_CTRL1B_WPT2 0x3A1B +#define OV9740_AEC_CTRL0F_WPT 0x3A0F +#define OV9740_AEC_CTRL10_BPT 0x3A10 +#define OV9740_AEC_CTRL1E_BPT2 0x3A1E +#define OV9740_AEC_LO_THRESHOLD 0x3A1F + +/* BLC Control */ +#define OV9740_BLC_AUTO_ENABLE 0x4002 +#define OV9740_BLC_MODE 0x4005 + +/* VFIFO */ +#define OV9740_VFIFO_READ_START_HI 0x4608 +#define OV9740_VFIFO_READ_START_LO 0x4609 + +/* DVP Control */ +#define OV9740_DVP_VSYNC_CTRL02 0x4702 +#define OV9740_DVP_VSYNC_MODE 0x4704 +#define OV9740_DVP_VSYNC_CTRL06 0x4706 + +/* PLL Setting */ +#define OV9740_PLL_MODE_CTRL01 0x3104 +#define OV9740_PRE_PLL_CLK_DIV 0x0305 +#define OV9740_PLL_MULTIPLIER 0x0307 +#define OV9740_VT_SYS_CLK_DIV 0x0303 +#define OV9740_VT_PIX_CLK_DIV 0x0301 +#define OV9740_PLL_CTRL3010 0x3010 +#define OV9740_VFIFO_CTRL00 0x460E + +/* ISP Control */ +#define OV9740_ISP_CTRL00 0x5000 +#define OV9740_ISP_CTRL01 0x5001 +#define OV9740_ISP_CTRL03 0x5003 +#define OV9740_ISP_CTRL05 0x5005 +#define OV9740_ISP_CTRL12 0x5012 +#define OV9740_ISP_CTRL19 0x5019 +#define OV9740_ISP_CTRL1A 0x501A +#define OV9740_ISP_CTRL1E 0x501E +#define OV9740_ISP_CTRL1F 0x501F +#define OV9740_ISP_CTRL20 0x5020 +#define OV9740_ISP_CTRL21 0x5021 + +/* AWB */ +#define OV9740_AWB_CTRL00 0x5180 +#define OV9740_AWB_CTRL01 0x5181 +#define OV9740_AWB_CTRL02 0x5182 +#define OV9740_AWB_CTRL03 0x5183 +#define OV9740_AWB_ADV_CTRL01 0x5184 +#define OV9740_AWB_ADV_CTRL02 0x5185 +#define OV9740_AWB_ADV_CTRL03 0x5186 +#define OV9740_AWB_ADV_CTRL04 0x5187 +#define OV9740_AWB_ADV_CTRL05 0x5188 +#define OV9740_AWB_ADV_CTRL06 0x5189 +#define OV9740_AWB_ADV_CTRL07 0x518A +#define OV9740_AWB_ADV_CTRL08 0x518B +#define OV9740_AWB_ADV_CTRL09 0x518C +#define OV9740_AWB_ADV_CTRL10 0x518D +#define OV9740_AWB_ADV_CTRL11 0x518E +#define OV9740_AWB_CTRL0F 0x518F +#define OV9740_AWB_CTRL10 0x5190 +#define OV9740_AWB_CTRL11 0x5191 +#define OV9740_AWB_CTRL12 0x5192 +#define OV9740_AWB_CTRL13 0x5193 +#define OV9740_AWB_CTRL14 0x5194 + +/* MIPI Control */ +#define OV9740_MIPI_CTRL00 0x4800 +#define OV9740_MIPI_3837 0x3837 +#define OV9740_MIPI_CTRL01 0x4801 +#define OV9740_MIPI_CTRL03 0x4803 +#define OV9740_MIPI_CTRL05 0x4805 +#define OV9740_VFIFO_RD_CTRL 0x4601 +#define OV9740_MIPI_CTRL_3012 0x3012 +#define OV9740_SC_CMMM_MIPI_CTR 0x3014 + +/* supported resolutions */ +enum { + OV9740_VGA, + OV9740_720P, +}; + +struct ov9740_resolution { + unsigned int width; + unsigned int height; +}; + +static struct ov9740_resolution ov9740_resolutions[] = { + [OV9740_VGA] = { + .width = 640, + .height = 480, + }, + [OV9740_720P] = { + .width = 1280, + .height = 720, + }, +}; + +/* Misc. structures */ +struct ov9740_reg { + u16 reg; + u8 val; +}; + +struct ov9740_priv { + struct v4l2_subdev subdev; + + int ident; + u16 model; + u8 revision; + u8 manid; + u8 smiaver; + + bool flag_vflip; + bool flag_hflip; +}; + +static const struct ov9740_reg ov9740_defaults[] = { + /* Banding Filter */ + { OV9740_AEC_B50_STEP_HI, 0x00 }, + { OV9740_AEC_B50_STEP_LO, 0xe8 }, + { OV9740_AEC_CTRL0E, 0x03 }, + { OV9740_AEC_MAXEXPO_50_H, 0x15 }, + { OV9740_AEC_MAXEXPO_50_L, 0xc6 }, + { OV9740_AEC_B60_STEP_HI, 0x00 }, + { OV9740_AEC_B60_STEP_LO, 0xc0 }, + { OV9740_AEC_CTRL0D, 0x04 }, + { OV9740_AEC_MAXEXPO_60_H, 0x18 }, + { OV9740_AEC_MAXEXPO_60_L, 0x20 }, + + /* LC */ + { 0x5842, 0x02 }, { 0x5843, 0x5e }, { 0x5844, 0x04 }, { 0x5845, 0x32 }, + { 0x5846, 0x03 }, { 0x5847, 0x29 }, { 0x5848, 0x02 }, { 0x5849, 0xcc }, + + /* Un-documented OV9740 registers */ + { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 }, + { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c }, + { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580A, 0x0e }, { 0x580B, 0x16 }, + { 0x580C, 0x06 }, { 0x580D, 0x02 }, { 0x580E, 0x00 }, { 0x580F, 0x00 }, + { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 }, + { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 }, + { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581A, 0x07 }, { 0x581B, 0x08 }, + { 0x581C, 0x0b }, { 0x581D, 0x14 }, { 0x581E, 0x28 }, { 0x581F, 0x23 }, + { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a }, + { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f }, + { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582A, 0x8f }, { 0x582B, 0x9e }, + { 0x582C, 0x8f }, { 0x582D, 0x9f }, { 0x582E, 0x4f }, { 0x582F, 0x87 }, + { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f }, + { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf }, + { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583A, 0x9f }, { 0x583B, 0x7f }, + { 0x583C, 0x5f }, + + /* Y Gamma */ + { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e }, + { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 }, + { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548A, 0xa4 }, { 0x548B, 0xb1 }, + { 0x548C, 0xc6 }, { 0x548D, 0xd8 }, { 0x548E, 0xe9 }, + + /* UV Gamma */ + { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 }, + { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 }, + { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549A, 0x02 }, { 0x549B, 0xeb }, + { 0x549C, 0x02 }, { 0x549D, 0xa0 }, { 0x549E, 0x02 }, { 0x549F, 0x67 }, + { 0x54A0, 0x02 }, { 0x54A1, 0x3b }, { 0x54A2, 0x02 }, { 0x54A3, 0x18 }, + { 0x54A4, 0x01 }, { 0x54A5, 0xe7 }, { 0x54A6, 0x01 }, { 0x54A7, 0xc3 }, + { 0x54A8, 0x01 }, { 0x54A9, 0x94 }, { 0x54AA, 0x01 }, { 0x54AB, 0x72 }, + { 0x54AC, 0x01 }, { 0x54AD, 0x57 }, + + /* AWB */ + { OV9740_AWB_CTRL00, 0xf0 }, + { OV9740_AWB_CTRL01, 0x00 }, + { OV9740_AWB_CTRL02, 0x41 }, + { OV9740_AWB_CTRL03, 0x42 }, + { OV9740_AWB_ADV_CTRL01, 0x8a }, + { OV9740_AWB_ADV_CTRL02, 0x61 }, + { OV9740_AWB_ADV_CTRL03, 0xce }, + { OV9740_AWB_ADV_CTRL04, 0xa8 }, + { OV9740_AWB_ADV_CTRL05, 0x17 }, + { OV9740_AWB_ADV_CTRL06, 0x1f }, + { OV9740_AWB_ADV_CTRL07, 0x27 }, + { OV9740_AWB_ADV_CTRL08, 0x41 }, + { OV9740_AWB_ADV_CTRL09, 0x34 }, + { OV9740_AWB_ADV_CTRL10, 0xf0 }, + { OV9740_AWB_ADV_CTRL11, 0x10 }, + { OV9740_AWB_CTRL0F, 0xff }, + { OV9740_AWB_CTRL10, 0x00 }, + { OV9740_AWB_CTRL11, 0xff }, + { OV9740_AWB_CTRL12, 0x00 }, + { OV9740_AWB_CTRL13, 0xff }, + { OV9740_AWB_CTRL14, 0x00 }, + + /* CIP */ + { 0x530D, 0x12 }, + + /* CMX */ + { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 }, + { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 }, + { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538A, 0x00 }, { 0x538B, 0x20 }, + { 0x538C, 0x00 }, { 0x538D, 0x00 }, { 0x538E, 0x00 }, { 0x538F, 0x16 }, + { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 }, + { 0x5394, 0x18 }, + + /* 50/60 Detection */ + { 0x3C0A, 0x9c }, { 0x3C0B, 0x3f }, + + /* Output Select */ + { OV9740_IO_OUTPUT_SEL01, 0x00 }, + { OV9740_IO_OUTPUT_SEL02, 0x00 }, + { OV9740_IO_CREL00, 0x00 }, + { OV9740_IO_CREL01, 0x00 }, + { OV9740_IO_CREL02, 0x00 }, + + /* AWB Control */ + { OV9740_AWB_MANUAL_CTRL, 0x00 }, + + /* Analog Control */ + { OV9740_ANALOG_CTRL03, 0xaa }, + { OV9740_ANALOG_CTRL32, 0x2f }, + { OV9740_ANALOG_CTRL20, 0x66 }, + { OV9740_ANALOG_CTRL21, 0xc0 }, + { OV9740_ANALOG_CTRL31, 0x52 }, + { OV9740_ANALOG_CTRL33, 0x50 }, + { OV9740_ANALOG_CTRL30, 0xca }, + { OV9740_ANALOG_CTRL04, 0x0c }, + { OV9740_ANALOG_CTRL01, 0x40 }, + { OV9740_ANALOG_CTRL02, 0x16 }, + { OV9740_ANALOG_CTRL10, 0xa1 }, + { OV9740_ANALOG_CTRL12, 0x24 }, + { OV9740_ANALOG_CTRL22, 0x9f }, + + /* Sensor Control */ + { OV9740_SENSOR_CTRL03, 0x42 }, + { OV9740_SENSOR_CTRL04, 0x10 }, + { OV9740_SENSOR_CTRL05, 0x45 }, + { OV9740_SENSOR_CTRL07, 0x14 }, + + /* Timing Control */ + { OV9740_TIMING_CTRL33, 0x04 }, + { OV9740_TIMING_CTRL35, 0x02 }, + { OV9740_TIMING_CTRL19, 0x6e }, + { OV9740_TIMING_CTRL17, 0x94 }, + + /* AEC/AGC Control */ + { OV9740_AEC_ENABLE, 0x10 }, + { OV9740_GAIN_CEILING_01, 0x00 }, + { OV9740_GAIN_CEILING_02, 0x7f }, + { OV9740_AEC_HI_THRESHOLD, 0xa0 }, + { OV9740_AEC_3A1A, 0x05 }, + { OV9740_AEC_CTRL1B_WPT2, 0x50 }, + { OV9740_AEC_CTRL0F_WPT, 0x50 }, + { OV9740_AEC_CTRL10_BPT, 0x4c }, + { OV9740_AEC_CTRL1E_BPT2, 0x4c }, + { OV9740_AEC_LO_THRESHOLD, 0x26 }, + + /* BLC Control */ + { OV9740_BLC_AUTO_ENABLE, 0x45 }, + { OV9740_BLC_MODE, 0x18 }, + + /* DVP Control */ + { OV9740_DVP_VSYNC_CTRL02, 0x04 }, + { OV9740_DVP_VSYNC_MODE, 0x00 }, + { OV9740_DVP_VSYNC_CTRL06, 0x08 }, + + /* PLL Setting */ + { OV9740_PLL_MODE_CTRL01, 0x20 }, + { OV9740_PRE_PLL_CLK_DIV, 0x03 }, + { OV9740_PLL_MULTIPLIER, 0x4c }, + { OV9740_VT_SYS_CLK_DIV, 0x01 }, + { OV9740_VT_PIX_CLK_DIV, 0x08 }, + { OV9740_PLL_CTRL3010, 0x01 }, + { OV9740_VFIFO_CTRL00, 0x82 }, + + /* Timing Setting */ + /* VTS */ + { OV9740_FRM_LENGTH_LN_HI, 0x03 }, + { OV9740_FRM_LENGTH_LN_LO, 0x07 }, + /* HTS */ + { OV9740_LN_LENGTH_PCK_HI, 0x06 }, + { OV9740_LN_LENGTH_PCK_LO, 0x62 }, + + /* MIPI Control */ + { OV9740_MIPI_CTRL00, 0x44 }, + { OV9740_MIPI_3837, 0x01 }, + { OV9740_MIPI_CTRL01, 0x0f }, + { OV9740_MIPI_CTRL03, 0x05 }, + { OV9740_MIPI_CTRL05, 0x10 }, + { OV9740_VFIFO_RD_CTRL, 0x16 }, + { OV9740_MIPI_CTRL_3012, 0x70 }, + { OV9740_SC_CMMM_MIPI_CTR, 0x01 }, +}; + +static const struct ov9740_reg ov9740_regs_vga[] = { + { OV9740_X_ADDR_START_HI, 0x00 }, + { OV9740_X_ADDR_START_LO, 0xa0 }, + { OV9740_Y_ADDR_START_HI, 0x00 }, + { OV9740_Y_ADDR_START_LO, 0x00 }, + { OV9740_X_ADDR_END_HI, 0x04 }, + { OV9740_X_ADDR_END_LO, 0x63 }, + { OV9740_Y_ADDR_END_HI, 0x02 }, + { OV9740_Y_ADDR_END_LO, 0xd3 }, + { OV9740_X_OUTPUT_SIZE_HI, 0x02 }, + { OV9740_X_OUTPUT_SIZE_LO, 0x80 }, + { OV9740_Y_OUTPUT_SIZE_HI, 0x01 }, + { OV9740_Y_OUTPUT_SIZE_LO, 0xe0 }, + { OV9740_ISP_CTRL1E, 0x03 }, + { OV9740_ISP_CTRL1F, 0xc0 }, + { OV9740_ISP_CTRL20, 0x02 }, + { OV9740_ISP_CTRL21, 0xd0 }, + { OV9740_VFIFO_READ_START_HI, 0x01 }, + { OV9740_VFIFO_READ_START_LO, 0x40 }, + { OV9740_ISP_CTRL00, 0xff }, + { OV9740_ISP_CTRL01, 0xff }, + { OV9740_ISP_CTRL03, 0xff }, +}; + +static const struct ov9740_reg ov9740_regs_720p[] = { + { OV9740_X_ADDR_START_HI, 0x00 }, + { OV9740_X_ADDR_START_LO, 0x00 }, + { OV9740_Y_ADDR_START_HI, 0x00 }, + { OV9740_Y_ADDR_START_LO, 0x00 }, + { OV9740_X_ADDR_END_HI, 0x05 }, + { OV9740_X_ADDR_END_LO, 0x03 }, + { OV9740_Y_ADDR_END_HI, 0x02 }, + { OV9740_Y_ADDR_END_LO, 0xd3 }, + { OV9740_X_OUTPUT_SIZE_HI, 0x05 }, + { OV9740_X_OUTPUT_SIZE_LO, 0x00 }, + { OV9740_Y_OUTPUT_SIZE_HI, 0x02 }, + { OV9740_Y_OUTPUT_SIZE_LO, 0xd0 }, + { OV9740_ISP_CTRL1E, 0x05 }, + { OV9740_ISP_CTRL1F, 0x00 }, + { OV9740_ISP_CTRL20, 0x02 }, + { OV9740_ISP_CTRL21, 0xd0 }, + { OV9740_VFIFO_READ_START_HI, 0x02 }, + { OV9740_VFIFO_READ_START_LO, 0x30 }, + { OV9740_ISP_CTRL00, 0xff }, + { OV9740_ISP_CTRL01, 0xef }, + { OV9740_ISP_CTRL03, 0xff }, +}; + +static enum v4l2_mbus_pixelcode ov9740_codes[] = { + V4L2_MBUS_FMT_YUYV8_2X8, +}; + +static const struct v4l2_queryctrl ov9740_controls[] = { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Vertically", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Horizontally", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, +}; + +/* read a register */ +static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 2, + .buf = (u8 *)®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = 1, + .buf = val, + }, + }; + + reg = swab16(reg); + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) { + dev_err(&client->dev, "Failed reading register 0x%04x!\n", reg); + return ret; + } + + return 0; +} + +/* write a register */ +static int ov9740_reg_write(struct i2c_client *client, u16 reg, u8 val) +{ + struct i2c_msg msg; + struct { + u16 reg; + u8 val; + } __packed buf; + int ret; + + reg = swab16(reg); + + buf.reg = reg; + buf.val = val; + + msg.addr = client->addr; + msg.flags = 0; + msg.len = 3; + msg.buf = (u8 *)&buf; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_err(&client->dev, "Failed writing register 0x%04x!\n", reg); + return ret; + } + + return 0; +} + + +/* Read a register, alter its bits, write it back */ +static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset) +{ + u8 val; + int ret; + + ret = ov9740_reg_read(client, reg, &val); + if (ret < 0) { + dev_err(&client->dev, + "[Read]-Modify-Write of register %02x failed!\n", reg); + return ret; + } + + val |= set; + val &= ~unset; + + ret = ov9740_reg_write(client, reg, val); + if (ret < 0) { + dev_err(&client->dev, + "Read-Modify-[Write] of register %02x failed!\n", reg); + return ret; + } + + return 0; +} + +static int ov9740_reg_write_array(struct i2c_client *client, + const struct ov9740_reg *regarray, + int regarraylen) +{ + int i; + int ret; + + for (i = 0; i < regarraylen; i++) { + ret = ov9740_reg_write(client, + regarray[i].reg, regarray[i].val); + if (ret < 0) + return ret; + } + + return 0; +} + +/* Start/Stop streaming from the device */ +static int ov9740_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov9740_priv *priv = to_ov9740(sd); + int ret; + + /* Program orientation register. */ + if (priv->flag_vflip) + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x2, 0); + else + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x2); + if (ret < 0) + return ret; + + if (priv->flag_hflip) + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0x1, 0); + else + ret = ov9740_reg_rmw(client, OV9740_IMAGE_ORT, 0, 0x1); + if (ret < 0) + return ret; + + if (enable) { + dev_dbg(&client->dev, "Enabling Streaming\n"); + /* Start Streaming */ + ret = ov9740_reg_write(client, OV9740_MODE_SELECT, 0x01); + + } else { + dev_dbg(&client->dev, "Disabling Streaming\n"); + /* Software Reset */ + ret = ov9740_reg_write(client, OV9740_SOFTWARE_RESET, 0x01); + if (!ret) + /* Setting Streaming to Standby */ + ret = ov9740_reg_write(client, OV9740_MODE_SELECT, + 0x00); + } + + return ret; +} + +/* Alter bus settings on camera side */ +static int ov9740_set_bus_param(struct soc_camera_device *icd, + unsigned long flags) +{ + return 0; +} + +/* Request bus settings on camera side */ +static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd) +{ + struct soc_camera_link *icl = to_soc_camera_link(icd); + + unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8; + + return soc_camera_apply_sensor_flags(icl, flags); +} + +/* Get status of additional camera capabilities */ +static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + ctrl->value = priv->flag_vflip; + break; + case V4L2_CID_HFLIP: + ctrl->value = priv->flag_hflip; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Set status of additional camera capabilities */ +static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + priv->flag_vflip = ctrl->value; + break; + case V4L2_CID_HFLIP: + priv->flag_hflip = ctrl->value; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Get chip identification */ +static int ov9740_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + id->ident = priv->ident; + id->revision = priv->revision; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov9740_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xffff) + return -EINVAL; + + reg->size = 2; + + ret = ov9740_reg_read(client, reg->reg, &val); + if (ret) + return ret; + + reg->val = (__u64)val; + + return ret; +} + +static int ov9740_set_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xffff || reg->val & ~0xff) + return -EINVAL; + + return ov9740_reg_write(client, reg->reg, reg->val); +} +#endif + +/* select nearest higher resolution for capture */ +static void ov9740_res_roundup(u32 *width, u32 *height) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++) + if ((ov9740_resolutions[i].width >= *width) && + (ov9740_resolutions[i].height >= *height)) { + *width = ov9740_resolutions[i].width; + *height = ov9740_resolutions[i].height; + return; + } + + *width = ov9740_resolutions[OV9740_720P].width; + *height = ov9740_resolutions[OV9740_720P].height; +} + +/* Setup registers according to resolution and color encoding */ +static int ov9740_set_res(struct i2c_client *client, u32 width) +{ + int ret; + + /* select register configuration for given resolution */ + if (width == ov9740_resolutions[OV9740_VGA].width) { + dev_dbg(&client->dev, "Setting image size to 640x480\n"); + ret = ov9740_reg_write_array(client, ov9740_regs_vga, + ARRAY_SIZE(ov9740_regs_vga)); + } else if (width == ov9740_resolutions[OV9740_720P].width) { + dev_dbg(&client->dev, "Setting image size to 1280x720\n"); + ret = ov9740_reg_write_array(client, ov9740_regs_720p, + ARRAY_SIZE(ov9740_regs_720p)); + } else { + dev_err(&client->dev, "Failed to select resolution!\n"); + return -EINVAL; + } + + return ret; +} + +/* set the format we will capture in */ +static int ov9740_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + enum v4l2_colorspace cspace; + enum v4l2_mbus_pixelcode code = mf->code; + int ret; + + ov9740_res_roundup(&mf->width, &mf->height); + + switch (code) { + case V4L2_MBUS_FMT_YUYV8_2X8: + cspace = V4L2_COLORSPACE_SRGB; + break; + default: + return -EINVAL; + } + + ret = ov9740_reg_write_array(client, ov9740_defaults, + ARRAY_SIZE(ov9740_defaults)); + if (ret < 0) + return ret; + + ret = ov9740_set_res(client, mf->width); + if (ret < 0) + return ret; + + mf->code = code; + mf->colorspace = cspace; + + return ret; +} + +static int ov9740_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + ov9740_res_roundup(&mf->width, &mf->height); + + mf->field = V4L2_FIELD_NONE; + mf->code = V4L2_MBUS_FMT_YUYV8_2X8; + mf->colorspace = V4L2_COLORSPACE_SRGB; + + return 0; +} + +static int ov9740_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov9740_codes)) + return -EINVAL; + + *code = ov9740_codes[index]; + + return 0; +} + +static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = ov9740_resolutions[OV9740_720P].width; + a->bounds.height = ov9740_resolutions[OV9740_720P].height; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + a->c.left = 0; + a->c.top = 0; + a->c.width = ov9740_resolutions[OV9740_720P].width; + a->c.height = ov9740_resolutions[OV9740_720P].height; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + return 0; +} + +static int ov9740_video_probe(struct soc_camera_device *icd, + struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ov9740_priv *priv = to_ov9740(sd); + u8 modelhi, modello; + int ret; + + /* + * We must have a parent by now. And it cannot be a wrong one. + * So this entire test is completely redundant. + */ + if (!icd->dev.parent || + to_soc_camera_host(icd->dev.parent)->nr != icd->iface) { + dev_err(&client->dev, "Parent missing or invalid!\n"); + ret = -ENODEV; + goto err; + } + + /* + * check and show product ID and manufacturer ID + */ + ret = ov9740_reg_read(client, OV9740_MODEL_ID_HI, &modelhi); + if (ret < 0) + goto err; + + ret = ov9740_reg_read(client, OV9740_MODEL_ID_LO, &modello); + if (ret < 0) + goto err; + + priv->model = (modelhi << 8) | modello; + + ret = ov9740_reg_read(client, OV9740_REVISION_NUMBER, &priv->revision); + if (ret < 0) + goto err; + + ret = ov9740_reg_read(client, OV9740_MANUFACTURER_ID, &priv->manid); + if (ret < 0) + goto err; + + ret = ov9740_reg_read(client, OV9740_SMIA_VERSION, &priv->smiaver); + if (ret < 0) + goto err; + + if (priv->model != 0x9740) { + ret = -ENODEV; + goto err; + } + + priv->ident = V4L2_IDENT_OV9740; + + dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, " + "Manufacturer 0x%02x, SMIA Version 0x%02x\n", + priv->model, priv->revision, priv->manid, priv->smiaver); + +err: + return ret; +} + +static struct soc_camera_ops ov9740_ops = { + .set_bus_param = ov9740_set_bus_param, + .query_bus_param = ov9740_query_bus_param, + .controls = ov9740_controls, + .num_controls = ARRAY_SIZE(ov9740_controls), +}; + +static struct v4l2_subdev_core_ops ov9740_core_ops = { + .g_ctrl = ov9740_g_ctrl, + .s_ctrl = ov9740_s_ctrl, + .g_chip_ident = ov9740_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov9740_get_register, + .s_register = ov9740_set_register, +#endif + +}; + +static struct v4l2_subdev_video_ops ov9740_video_ops = { + .s_stream = ov9740_s_stream, + .s_mbus_fmt = ov9740_s_fmt, + .try_mbus_fmt = ov9740_try_fmt, + .enum_mbus_fmt = ov9740_enum_fmt, + .cropcap = ov9740_cropcap, + .g_crop = ov9740_g_crop, +}; + +static struct v4l2_subdev_ops ov9740_subdev_ops = { + .core = &ov9740_core_ops, + .video = &ov9740_video_ops, +}; + +/* + * i2c_driver function + */ +static int ov9740_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov9740_priv *priv; + struct soc_camera_device *icd = client->dev.platform_data; + struct soc_camera_link *icl; + int ret; + + if (!icd) { + dev_err(&client->dev, "Missing soc-camera data!\n"); + return -EINVAL; + } + + icl = to_soc_camera_link(icd); + if (!icl) { + dev_err(&client->dev, "Missing platform_data for driver\n"); + return -EINVAL; + } + + priv = kzalloc(sizeof(struct ov9740_priv), GFP_KERNEL); + if (!priv) { + dev_err(&client->dev, "Failed to allocate private data!\n"); + return -ENOMEM; + } + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops); + + icd->ops = &ov9740_ops; + + ret = ov9740_video_probe(icd, client); + if (ret < 0) { + icd->ops = NULL; + kfree(priv); + } + + return ret; +} + +static int ov9740_remove(struct i2c_client *client) +{ + struct ov9740_priv *priv = i2c_get_clientdata(client); + + kfree(priv); + + return 0; +} + +static const struct i2c_device_id ov9740_id[] = { + { "ov9740", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov9740_id); + +static struct i2c_driver ov9740_i2c_driver = { + .driver = { + .name = "ov9740", + }, + .probe = ov9740_probe, + .remove = ov9740_remove, + .id_table = ov9740_id, +}; + +static int __init ov9740_module_init(void) +{ + return i2c_add_driver(&ov9740_i2c_driver); +} + +static void __exit ov9740_module_exit(void) +{ + i2c_del_driver(&ov9740_i2c_driver); +} + +module_init(ov9740_module_init); +module_exit(ov9740_module_exit); + +MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV9740"); +MODULE_AUTHOR("Andrew Chew <achew@nvidia.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index 2222da8d0ca6..c514d0b9ffdc 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -99,9 +99,27 @@ static const struct routing_scheme routing_defgv = { .cnt = ARRAY_SIZE(routing_schemegv), }; +/* Specific to grabster av400 device */ +static const struct routing_scheme_item routing_schemeav400[] = { + [PVR2_CVAL_INPUT_COMPOSITE] = { + .vid = CX25840_COMPOSITE1, + .aud = CX25840_AUDIO_SERIAL, + }, + [PVR2_CVAL_INPUT_SVIDEO] = { + .vid = (CX25840_SVIDEO_LUMA2|CX25840_SVIDEO_CHROMA4), + .aud = CX25840_AUDIO_SERIAL, + }, +}; + +static const struct routing_scheme routing_defav400 = { + .def = routing_schemeav400, + .cnt = ARRAY_SIZE(routing_schemeav400), +}; + static const struct routing_scheme *routing_schemes[] = { [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0, [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv, + [PVR2_ROUTING_SCHEME_AV400] = &routing_defav400, }; void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 3092abfd66a2..e799331389b1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -157,6 +157,28 @@ static const struct pvr2_device_desc pvr2_device_gotview_2d = { /*------------------------------------------------------------------------*/ +/* Terratec Grabster AV400 */ + +static const struct pvr2_device_client_desc pvr2_cli_av400[] = { + { .module_id = PVR2_CLIENT_ID_CX25840 }, +}; + +static const struct pvr2_device_desc pvr2_device_av400 = { + .description = "Terratec Grabster AV400", + .shortname = "av400", + .flag_is_experimental = 1, + .client_table.lst = pvr2_cli_av400, + .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), + .flag_has_cx25840 = !0, + .flag_has_analogtuner = 0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, +}; + + + +/*------------------------------------------------------------------------*/ /* OnAir Creator */ #ifdef CONFIG_VIDEO_PVRUSB2_DVB @@ -517,6 +539,8 @@ struct usb_device_id pvr2_device_table[] = { .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, { USB_DEVICE(0x2040, 0x7501), .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, + { USB_DEVICE(0x0ccd, 0x0039), + .driver_info = (kernel_ulong_t)&pvr2_device_av400}, { } }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 66ad516bdfd9..9d0dd08f57f8 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -499,31 +499,35 @@ static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top) return 0; } -static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *val) +static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *width) { struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; - int stat = pvr2_hdw_check_cropcap(cptr->hdw); + int stat, bleftend, cleft; + + stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { return stat; } - *val = 0; - if (cap->bounds.width > cptr->hdw->cropl_val) { - *val = cap->bounds.width - cptr->hdw->cropl_val; - } + bleftend = cap->bounds.left+cap->bounds.width; + cleft = cptr->hdw->cropl_val; + + *width = cleft < bleftend ? bleftend-cleft : 0; return 0; } -static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *val) +static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *height) { struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info; - int stat = pvr2_hdw_check_cropcap(cptr->hdw); + int stat, btopend, ctop; + + stat = pvr2_hdw_check_cropcap(cptr->hdw); if (stat != 0) { return stat; } - *val = 0; - if (cap->bounds.height > cptr->hdw->cropt_val) { - *val = cap->bounds.height - cptr->hdw->cropt_val; - } + btopend = cap->bounds.top+cap->bounds.height; + ctop = cptr->hdw->cropt_val; + + *height = ctop < btopend ? btopend-ctop : 0; return 0; } @@ -1114,6 +1118,7 @@ static const struct pvr2_ctl_info control_defs[] = { .internal_id = PVR2_CID_CROPW, .default_value = 720, DEFREF(cropw), + DEFINT(0, 864), .get_max_value = ctrl_cropw_max_get, .get_def_value = ctrl_get_cropcapdw, }, { @@ -1122,6 +1127,7 @@ static const struct pvr2_ctl_info control_defs[] = { .internal_id = PVR2_CID_CROPH, .default_value = 480, DEFREF(croph), + DEFINT(0, 576), .get_max_value = ctrl_croph_max_get, .get_def_value = ctrl_get_cropcapdh, }, { @@ -2027,6 +2033,8 @@ static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw) hdw->decoder_client_id); memset(&fmt, 0, sizeof(fmt)); fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE; + fmt.fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525; + fmt.fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525; v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id, vbi, s_sliced_fmt, &fmt.fmt.sliced); } @@ -2842,15 +2850,23 @@ static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw) PVR2_TRACE_ERROR_LEGS, "WARNING: Failed to identify any viable standards"); } + + /* Set up the dynamic control for this standard */ hdw->std_enum_names = kmalloc(sizeof(char *)*(std_cnt+1),GFP_KERNEL); - hdw->std_enum_names[0] = "none"; - for (idx = 0; idx < std_cnt; idx++) { - hdw->std_enum_names[idx+1] = - newstd[idx].name; - } - // Set up the dynamic control for this standard - hdw->std_info_enum.def.type_enum.value_names = hdw->std_enum_names; - hdw->std_info_enum.def.type_enum.count = std_cnt+1; + if (hdw->std_enum_names) { + hdw->std_enum_names[0] = "none"; + for (idx = 0; idx < std_cnt; idx++) + hdw->std_enum_names[idx+1] = newstd[idx].name; + hdw->std_info_enum.def.type_enum.value_names = + hdw->std_enum_names; + hdw->std_info_enum.def.type_enum.count = std_cnt+1; + } else { + pvr2_trace( + PVR2_TRACE_ERROR_LEGS, + "WARNING: Failed to alloc memory for names"); + hdw->std_info_enum.def.type_enum.value_names = NULL; + hdw->std_info_enum.def.type_enum.count = 0; + } hdw->std_defs = newstd; hdw->std_enum_cnt = std_cnt+1; hdw->std_enum_cur = 0; @@ -3165,6 +3181,19 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) struct pvr2_ctrl *cptr; int disruptive_change; + if (hdw->input_dirty && hdw->state_pathway_ok && + (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ? + PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) != + hdw->pathway_state)) { + /* Change of mode being asked for... */ + hdw->state_pathway_ok = 0; + trace_stbit("state_pathway_ok", hdw->state_pathway_ok); + } + if (!hdw->state_pathway_ok) { + /* Can't commit anything until pathway is ok. */ + return 0; + } + /* Handle some required side effects when the video standard is changed.... */ if (hdw->std_dirty) { @@ -3199,18 +3228,6 @@ static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) } } - if (hdw->input_dirty && hdw->state_pathway_ok && - (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ? - PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) != - hdw->pathway_state)) { - /* Change of mode being asked for... */ - hdw->state_pathway_ok = 0; - trace_stbit("state_pathway_ok",hdw->state_pathway_ok); - } - if (!hdw->state_pathway_ok) { - /* Can't commit anything until pathway is ok. */ - return 0; - } /* The broadcast decoder can only scale down, so if * res_*_dirty && crop window < output format ==> enlarge crop. * @@ -5159,8 +5176,7 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) using v4l2-subdev - therefore we can't support that AT ALL right now. (Of course, no sub-drivers seem to implement it either. But now it's a a chicken and egg problem...) */ - v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, - &hdw->tuner_signal_info); + v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp); pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll" " type=%u strength=%u audio=0x%x cap=0x%x" " low=%u hi=%u", diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 451ecd485f97..e72d5103e778 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -578,7 +578,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) switch (hdw->ir_scheme_active) { case PVR2_IR_SCHEME_24XXX: /* FX2-controlled IR */ case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */ - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; init_data->type = RC_TYPE_RC5; init_data->name = hdw->hdw_desc->description; @@ -593,7 +593,7 @@ static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) break; case PVR2_IR_SCHEME_ZILOG: /* HVR-1950 style */ case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */ - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->ir_codes = RC_MAP_HAUPPAUGE; init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; init_data->type = RC_TYPE_RC5; init_data->name = hdw->hdw_desc->description; diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 281806b2df62..6ef1335b2858 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -324,36 +324,45 @@ static void pvr2_sysfs_add_control(struct pvr2_sysfs *sfp,int ctl_id) } sfp->item_last = cip; + sysfs_attr_init(&cip->attr_name.attr); cip->attr_name.attr.name = "name"; cip->attr_name.attr.mode = S_IRUGO; cip->attr_name.show = show_name; + sysfs_attr_init(&cip->attr_type.attr); cip->attr_type.attr.name = "type"; cip->attr_type.attr.mode = S_IRUGO; cip->attr_type.show = show_type; + sysfs_attr_init(&cip->attr_min.attr); cip->attr_min.attr.name = "min_val"; cip->attr_min.attr.mode = S_IRUGO; cip->attr_min.show = show_min; + sysfs_attr_init(&cip->attr_max.attr); cip->attr_max.attr.name = "max_val"; cip->attr_max.attr.mode = S_IRUGO; cip->attr_max.show = show_max; + sysfs_attr_init(&cip->attr_def.attr); cip->attr_def.attr.name = "def_val"; cip->attr_def.attr.mode = S_IRUGO; cip->attr_def.show = show_def; + sysfs_attr_init(&cip->attr_val.attr); cip->attr_val.attr.name = "cur_val"; cip->attr_val.attr.mode = S_IRUGO; + sysfs_attr_init(&cip->attr_custom.attr); cip->attr_custom.attr.name = "custom_val"; cip->attr_custom.attr.mode = S_IRUGO; + sysfs_attr_init(&cip->attr_enum.attr); cip->attr_enum.attr.name = "enum_val"; cip->attr_enum.attr.mode = S_IRUGO; cip->attr_enum.show = show_enum; + sysfs_attr_init(&cip->attr_bits.attr); cip->attr_bits.attr.name = "bit_val"; cip->attr_bits.attr.mode = S_IRUGO; cip->attr_bits.show = show_bits; diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 58617fc656c2..38761142a4d9 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -795,12 +795,10 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) case VIDIOC_S_CROP: { struct v4l2_crop *crop = (struct v4l2_crop *)arg; - struct v4l2_cropcap cap; if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { ret = -EINVAL; break; } - cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ret = pvr2_ctrl_set_value( pvr2_hdw_get_ctrl_by_id(hdw, PVR2_CID_CROPL), crop->c.left); diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index bd1519a4ecb4..780af5f81642 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -151,8 +151,6 @@ static int pwc_video_close(struct file *file); static ssize_t pwc_video_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); static unsigned int pwc_video_poll(struct file *file, poll_table *wait); -static long pwc_video_ioctl(struct file *file, - unsigned int ioctlnr, unsigned long arg); static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma); static const struct v4l2_file_operations pwc_fops = { @@ -162,7 +160,7 @@ static const struct v4l2_file_operations pwc_fops = { .read = pwc_video_read, .poll = pwc_video_poll, .mmap = pwc_video_mmap, - .unlocked_ioctl = pwc_video_ioctl, + .unlocked_ioctl = video_ioctl2, }; static struct video_device pwc_template = { .name = "Philips Webcam", /* Filled in later */ @@ -1098,7 +1096,6 @@ static int pwc_video_open(struct file *file) return -EBUSY; } - mutex_lock(&pdev->modlock); pwc_construct(pdev); /* set min/max sizes correct */ if (!pdev->usb_init) { PWC_DEBUG_OPEN("Doing first time initialization.\n"); @@ -1130,7 +1127,6 @@ static int pwc_video_open(struct file *file) if (i < 0) { PWC_DEBUG_OPEN("Failed to allocate buffers memory.\n"); pwc_free_buffers(pdev); - mutex_unlock(&pdev->modlock); return i; } @@ -1171,7 +1167,6 @@ static int pwc_video_open(struct file *file) if (i) { PWC_DEBUG_OPEN("Second attempt at set_video_mode failed.\n"); pwc_free_buffers(pdev); - mutex_unlock(&pdev->modlock); return i; } @@ -1181,7 +1176,6 @@ static int pwc_video_open(struct file *file) pdev->vopen++; file->private_data = vdev; - mutex_unlock(&pdev->modlock); PWC_DEBUG_OPEN("<< video_open() returns 0.\n"); return 0; } @@ -1210,7 +1204,6 @@ static int pwc_video_close(struct file *file) PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); pdev = video_get_drvdata(vdev); - mutex_lock(&pdev->modlock); if (pdev->vopen == 0) PWC_DEBUG_MODULE("video_close() called on closed device?\n"); @@ -1248,7 +1241,6 @@ static int pwc_video_close(struct file *file) if (device_hint[hint].pdev == pdev) device_hint[hint].pdev = NULL; } - mutex_unlock(&pdev->modlock); return 0; } @@ -1283,7 +1275,6 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, if (pdev == NULL) return -EFAULT; - mutex_lock(&pdev->modlock); if (pdev->error_status) { rv = -pdev->error_status; /* Something happened, report what. */ goto err_out; @@ -1318,8 +1309,10 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, rv = -ERESTARTSYS; goto err_out; } + mutex_unlock(&pdev->modlock); schedule(); set_current_state(TASK_INTERRUPTIBLE); + mutex_lock(&pdev->modlock); } remove_wait_queue(&pdev->frameq, &wait); set_current_state(TASK_RUNNING); @@ -1352,10 +1345,8 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, pdev->image_read_pos = 0; pwc_next_image(pdev); } - mutex_unlock(&pdev->modlock); return count; err_out: - mutex_unlock(&pdev->modlock); return rv; } @@ -1372,9 +1363,7 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait) return -EFAULT; /* Start the stream (if not already started) */ - mutex_lock(&pdev->modlock); ret = pwc_isoc_init(pdev); - mutex_unlock(&pdev->modlock); if (ret) return ret; @@ -1387,25 +1376,6 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait) return 0; } -static long pwc_video_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - long r = -ENODEV; - - if (!vdev) - goto out; - pdev = video_get_drvdata(vdev); - - mutex_lock(&pdev->modlock); - if (!pdev->unplugged) - r = video_usercopy(file, cmd, arg, pwc_video_do_ioctl); - mutex_unlock(&pdev->modlock); -out: - return r; -} - static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) { struct video_device *vdev = file->private_data; @@ -1754,6 +1724,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id } memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); pdev->vdev->parent = &intf->dev; + pdev->vdev->lock = &pdev->modlock; + pdev->vdev->ioctl_ops = &pwc_ioctl_ops; strcpy(pdev->vdev->name, name); video_set_drvdata(pdev->vdev, pdev); diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index 8ca4d22b4384..aa87e462a958 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -341,604 +341,555 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f) } -long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg) +static int pwc_querycap(struct file *file, void *fh, struct v4l2_capability *cap) { struct video_device *vdev = video_devdata(file); - struct pwc_device *pdev; - DECLARE_WAITQUEUE(wait, current); - - if (vdev == NULL) - return -EFAULT; - pdev = video_get_drvdata(vdev); - if (pdev == NULL) - return -EFAULT; + struct pwc_device *pdev = video_drvdata(file); + + strcpy(cap->driver, PWC_NAME); + strlcpy(cap->card, vdev->name, sizeof(cap->card)); + usb_make_path(pdev->udev, cap->bus_info, sizeof(cap->bus_info)); + cap->version = PWC_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + return 0; +} -#ifdef CONFIG_USB_PWC_DEBUG - if (PWC_DEBUG_LEVEL_IOCTL & pwc_trace) { - v4l_printk_ioctl(cmd); - printk("\n"); - } -#endif - - - switch (cmd) { - /* V4L2 Layer */ - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCAP) This application "\ - "try to use the v4l2 layer\n"); - strcpy(cap->driver,PWC_NAME); - strlcpy(cap->card, vdev->name, sizeof(cap->card)); - usb_make_path(pdev->udev,cap->bus_info,sizeof(cap->bus_info)); - cap->version = PWC_VERSION_CODE; - cap->capabilities = - V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_STREAMING | - V4L2_CAP_READWRITE; - return 0; - } +static int pwc_enum_input(struct file *file, void *fh, struct v4l2_input *i) +{ + if (i->index) /* Only one INPUT is supported */ + return -EINVAL; - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; + strcpy(i->name, "usb"); + return 0; +} - if ( i->index ) /* Only one INPUT is supported */ - return -EINVAL; +static int pwc_g_input(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + return 0; +} - memset(i, 0, sizeof(struct v4l2_input)); - strcpy(i->name, "usb"); - return 0; - } +static int pwc_s_input(struct file *file, void *fh, unsigned int i) +{ + return i ? -EINVAL : 0; +} - case VIDIOC_G_INPUT: - { - int *i = arg; - *i = 0; /* Only one INPUT is supported */ - return 0; - } - case VIDIOC_S_INPUT: - { - int *i = arg; +static int pwc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *c) +{ + int i; - if ( *i ) { /* Only one INPUT is supported */ - PWC_DEBUG_IOCTL("Only one input source is"\ - " supported with this webcam.\n"); - return -EINVAL; - } + for (i = 0; i < sizeof(pwc_controls) / sizeof(struct v4l2_queryctrl); i++) { + if (pwc_controls[i].id == c->id) { + PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) found\n"); + memcpy(c, &pwc_controls[i], sizeof(struct v4l2_queryctrl)); return 0; } + } + return -EINVAL; +} - /* TODO: */ - case VIDIOC_QUERYCTRL: - { - struct v4l2_queryctrl *c = arg; - int i; - - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) query id=%d\n", c->id); - for (i=0; i<sizeof(pwc_controls)/sizeof(struct v4l2_queryctrl); i++) { - if (pwc_controls[i].id == c->id) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) found\n"); - memcpy(c,&pwc_controls[i],sizeof(struct v4l2_queryctrl)); - return 0; - } - } - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) not found\n"); +static int pwc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c) +{ + struct pwc_device *pdev = video_drvdata(file); + int ret; + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = pwc_get_brightness(pdev); + if (c->value < 0) return -EINVAL; - } - case VIDIOC_G_CTRL: - { - struct v4l2_control *c = arg; - int ret; - - switch (c->id) - { - case V4L2_CID_BRIGHTNESS: - c->value = pwc_get_brightness(pdev); - if (c->value<0) - return -EINVAL; - return 0; - case V4L2_CID_CONTRAST: - c->value = pwc_get_contrast(pdev); - if (c->value<0) - return -EINVAL; - return 0; - case V4L2_CID_SATURATION: - ret = pwc_get_saturation(pdev, &c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_GAMMA: - c->value = pwc_get_gamma(pdev); - if (c->value<0) - return -EINVAL; - return 0; - case V4L2_CID_RED_BALANCE: - ret = pwc_get_red_gain(pdev, &c->value); - if (ret<0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_BLUE_BALANCE: - ret = pwc_get_blue_gain(pdev, &c->value); - if (ret<0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_AUTO_WHITE_BALANCE: - ret = pwc_get_awb(pdev); - if (ret<0) - return -EINVAL; - c->value = (ret == PWC_WB_MANUAL)?0:1; - return 0; - case V4L2_CID_GAIN: - ret = pwc_get_agc(pdev, &c->value); - if (ret<0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_AUTOGAIN: - ret = pwc_get_agc(pdev, &c->value); - if (ret<0) - return -EINVAL; - c->value = (c->value < 0)?1:0; - return 0; - case V4L2_CID_EXPOSURE: - ret = pwc_get_shutter_speed(pdev, &c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_COLOUR_MODE: - ret = pwc_get_colour_mode(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_AUTOCONTOUR: - ret = pwc_get_contour(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value=(c->value == -1?1:0); - return 0; - case V4L2_CID_PRIVATE_CONTOUR: - ret = pwc_get_contour(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value >>= 10; - return 0; - case V4L2_CID_PRIVATE_BACKLIGHT: - ret = pwc_get_backlight(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_FLICKERLESS: - ret = pwc_get_flicker(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value=(c->value?1:0); - return 0; - case V4L2_CID_PRIVATE_NOISE_REDUCTION: - ret = pwc_get_dynamic_noise(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - - case V4L2_CID_PRIVATE_SAVE_USER: - case V4L2_CID_PRIVATE_RESTORE_USER: - case V4L2_CID_PRIVATE_RESTORE_FACTORY: - return -EINVAL; - } + return 0; + case V4L2_CID_CONTRAST: + c->value = pwc_get_contrast(pdev); + if (c->value < 0) return -EINVAL; - } - case VIDIOC_S_CTRL: - { - struct v4l2_control *c = arg; - int ret; - - switch (c->id) - { - case V4L2_CID_BRIGHTNESS: - c->value <<= 9; - ret = pwc_set_brightness(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_CONTRAST: - c->value <<= 10; - ret = pwc_set_contrast(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_SATURATION: - ret = pwc_set_saturation(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_GAMMA: - c->value <<= 11; - ret = pwc_set_gamma(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_RED_BALANCE: - c->value <<= 8; - ret = pwc_set_red_gain(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_BLUE_BALANCE: - c->value <<= 8; - ret = pwc_set_blue_gain(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_AUTO_WHITE_BALANCE: - c->value = (c->value == 0)?PWC_WB_MANUAL:PWC_WB_AUTO; - ret = pwc_set_awb(pdev, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_EXPOSURE: - c->value <<= 8; - ret = pwc_set_shutter_speed(pdev, c->value?0:1, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_AUTOGAIN: - /* autogain off means nothing without a gain */ - if (c->value == 0) - return 0; - ret = pwc_set_agc(pdev, c->value, 0); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_GAIN: - c->value <<= 8; - ret = pwc_set_agc(pdev, 0, c->value); - if (ret<0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_SAVE_USER: - if (pwc_save_user(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_RESTORE_USER: - if (pwc_restore_user(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_RESTORE_FACTORY: - if (pwc_restore_factory(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_COLOUR_MODE: - ret = pwc_set_colour_mode(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_AUTOCONTOUR: - c->value=(c->value == 1)?-1:0; - ret = pwc_set_contour(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_CONTOUR: - c->value <<= 10; - ret = pwc_set_contour(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_BACKLIGHT: - ret = pwc_set_backlight(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_FLICKERLESS: - ret = pwc_set_flicker(pdev, c->value); - if (ret < 0) - return -EINVAL; - case V4L2_CID_PRIVATE_NOISE_REDUCTION: - ret = pwc_set_dynamic_noise(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - - } + return 0; + case V4L2_CID_SATURATION: + ret = pwc_get_saturation(pdev, &c->value); + if (ret < 0) return -EINVAL; - } + return 0; + case V4L2_CID_GAMMA: + c->value = pwc_get_gamma(pdev); + if (c->value < 0) + return -EINVAL; + return 0; + case V4L2_CID_RED_BALANCE: + ret = pwc_get_red_gain(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value >>= 8; + return 0; + case V4L2_CID_BLUE_BALANCE: + ret = pwc_get_blue_gain(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value >>= 8; + return 0; + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = pwc_get_awb(pdev); + if (ret < 0) + return -EINVAL; + c->value = (ret == PWC_WB_MANUAL) ? 0 : 1; + return 0; + case V4L2_CID_GAIN: + ret = pwc_get_agc(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value >>= 8; + return 0; + case V4L2_CID_AUTOGAIN: + ret = pwc_get_agc(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value = (c->value < 0) ? 1 : 0; + return 0; + case V4L2_CID_EXPOSURE: + ret = pwc_get_shutter_speed(pdev, &c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_COLOUR_MODE: + ret = pwc_get_colour_mode(pdev, &c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_AUTOCONTOUR: + ret = pwc_get_contour(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value = (c->value == -1 ? 1 : 0); + return 0; + case V4L2_CID_PRIVATE_CONTOUR: + ret = pwc_get_contour(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value >>= 10; + return 0; + case V4L2_CID_PRIVATE_BACKLIGHT: + ret = pwc_get_backlight(pdev, &c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_FLICKERLESS: + ret = pwc_get_flicker(pdev, &c->value); + if (ret < 0) + return -EINVAL; + c->value = (c->value ? 1 : 0); + return 0; + case V4L2_CID_PRIVATE_NOISE_REDUCTION: + ret = pwc_get_dynamic_noise(pdev, &c->value); + if (ret < 0) + return -EINVAL; + return 0; - case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *f = arg; - int index; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - /* We only support two format: the raw format, and YUV */ - index = f->index; - memset(f,0,sizeof(struct v4l2_fmtdesc)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - f->index = index; - switch(index) - { - case 0: - /* RAW format */ - f->pixelformat = pdev->type<=646?V4L2_PIX_FMT_PWC1:V4L2_PIX_FMT_PWC2; - f->flags = V4L2_FMT_FLAG_COMPRESSED; - strlcpy(f->description,"Raw Philips Webcam",sizeof(f->description)); - break; - case 1: - f->pixelformat = V4L2_PIX_FMT_YUV420; - strlcpy(f->description,"4:2:0, planar, Y-Cb-Cr",sizeof(f->description)); - break; - default: - return -EINVAL; - } - return 0; - } + case V4L2_CID_PRIVATE_SAVE_USER: + case V4L2_CID_PRIVATE_RESTORE_USER: + case V4L2_CID_PRIVATE_RESTORE_FACTORY: + return -EINVAL; + } + return -EINVAL; +} - case VIDIOC_G_FMT: - { - struct v4l2_format *f = arg; +static int pwc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) +{ + struct pwc_device *pdev = video_drvdata(file); + int ret; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value <<= 9; + ret = pwc_set_brightness(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_CONTRAST: + c->value <<= 10; + ret = pwc_set_contrast(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_SATURATION: + ret = pwc_set_saturation(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_GAMMA: + c->value <<= 11; + ret = pwc_set_gamma(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_RED_BALANCE: + c->value <<= 8; + ret = pwc_set_red_gain(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_BLUE_BALANCE: + c->value <<= 8; + ret = pwc_set_blue_gain(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_AUTO_WHITE_BALANCE: + c->value = (c->value == 0) ? PWC_WB_MANUAL : PWC_WB_AUTO; + ret = pwc_set_awb(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_EXPOSURE: + c->value <<= 8; + ret = pwc_set_shutter_speed(pdev, c->value ? 0 : 1, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_AUTOGAIN: + /* autogain off means nothing without a gain */ + if (c->value == 0) + return 0; + ret = pwc_set_agc(pdev, c->value, 0); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_GAIN: + c->value <<= 8; + ret = pwc_set_agc(pdev, 0, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_SAVE_USER: + if (pwc_save_user(pdev)) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_RESTORE_USER: + if (pwc_restore_user(pdev)) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_RESTORE_FACTORY: + if (pwc_restore_factory(pdev)) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_COLOUR_MODE: + ret = pwc_set_colour_mode(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_AUTOCONTOUR: + c->value = (c->value == 1) ? -1 : 0; + ret = pwc_set_contour(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_CONTOUR: + c->value <<= 10; + ret = pwc_set_contour(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_BACKLIGHT: + ret = pwc_set_backlight(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; + case V4L2_CID_PRIVATE_FLICKERLESS: + ret = pwc_set_flicker(pdev, c->value); + if (ret < 0) + return -EINVAL; + case V4L2_CID_PRIVATE_NOISE_REDUCTION: + ret = pwc_set_dynamic_noise(pdev, c->value); + if (ret < 0) + return -EINVAL; + return 0; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_G_FMT) return size %dx%d\n",pdev->image.x,pdev->image.y); - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; + } + return -EINVAL; +} - pwc_vidioc_fill_fmt(pdev, f); +static int pwc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f) +{ + struct pwc_device *pdev = video_drvdata(file); + + /* We only support two format: the raw format, and YUV */ + switch (f->index) { + case 0: + /* RAW format */ + f->pixelformat = pdev->type <= 646 ? V4L2_PIX_FMT_PWC1 : V4L2_PIX_FMT_PWC2; + f->flags = V4L2_FMT_FLAG_COMPRESSED; + strlcpy(f->description, "Raw Philips Webcam", sizeof(f->description)); + break; + case 1: + f->pixelformat = V4L2_PIX_FMT_YUV420; + strlcpy(f->description, "4:2:0, planar, Y-Cb-Cr", sizeof(f->description)); + break; + default: + return -EINVAL; + } + return 0; +} - return 0; - } +static int pwc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct pwc_device *pdev = video_drvdata(file); - case VIDIOC_TRY_FMT: - return pwc_vidioc_try_fmt(pdev, arg); + PWC_DEBUG_IOCTL("ioctl(VIDIOC_G_FMT) return size %dx%d\n", + pdev->image.x, pdev->image.y); + pwc_vidioc_fill_fmt(pdev, f); + return 0; +} - case VIDIOC_S_FMT: - return pwc_vidioc_set_fmt(pdev, arg); +static int pwc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct pwc_device *pdev = video_drvdata(file); - case VIDIOC_G_STD: - { - v4l2_std_id *std = arg; - *std = V4L2_STD_UNKNOWN; - return 0; - } + return pwc_vidioc_try_fmt(pdev, f); +} - case VIDIOC_S_STD: - { - v4l2_std_id *std = arg; - if (*std != V4L2_STD_UNKNOWN) - return -EINVAL; - return 0; - } +static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +{ + struct pwc_device *pdev = video_drvdata(file); - case VIDIOC_ENUMSTD: - { - struct v4l2_standard *std = arg; - if (std->index != 0) - return -EINVAL; - std->id = V4L2_STD_UNKNOWN; - strlcpy(std->name, "webcam", sizeof(std->name)); - return 0; - } + return pwc_vidioc_set_fmt(pdev, f); +} - case VIDIOC_REQBUFS: - { - struct v4l2_requestbuffers *rb = arg; - int nbuffers; +static int pwc_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb) +{ + int nbuffers; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n",rb->count); - if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; + PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n", rb->count); + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; - nbuffers = rb->count; - if (nbuffers < 2) - nbuffers = 2; - else if (nbuffers > pwc_mbufs) - nbuffers = pwc_mbufs; - /* Force to use our # of buffers */ - rb->count = pwc_mbufs; - return 0; - } + nbuffers = rb->count; + if (nbuffers < 2) + nbuffers = 2; + else if (nbuffers > pwc_mbufs) + nbuffers = pwc_mbufs; + /* Force to use our # of buffers */ + rb->count = pwc_mbufs; + return 0; +} - case VIDIOC_QUERYBUF: - { - struct v4l2_buffer *buf = arg; - int index; +static int pwc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + struct pwc_device *pdev = video_drvdata(file); + int index; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n",buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n"); - return -EINVAL; - } - if (buf->memory != V4L2_MEMORY_MMAP) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad memory type\n"); - return -EINVAL; - } - index = buf->index; - if (index < 0 || index >= pwc_mbufs) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index); - return -EINVAL; - } + PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n", buf->index); + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n"); + return -EINVAL; + } + index = buf->index; + if (index < 0 || index >= pwc_mbufs) { + PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index); + return -EINVAL; + } - memset(buf, 0, sizeof(struct v4l2_buffer)); - buf->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - buf->index = index; - buf->m.offset = index * pdev->len_per_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->field = V4L2_FIELD_NONE; - buf->memory = V4L2_MEMORY_MMAP; - //buf->flags = V4L2_BUF_FLAG_MAPPED; - buf->length = pdev->len_per_image; - - PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n",buf->index); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n",buf->m.offset); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n",buf->bytesused); + buf->m.offset = index * pdev->len_per_image; + if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) + buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); + else + buf->bytesused = pdev->view.size; + buf->field = V4L2_FIELD_NONE; + buf->memory = V4L2_MEMORY_MMAP; + /*buf->flags = V4L2_BUF_FLAG_MAPPED;*/ + buf->length = pdev->len_per_image; - return 0; - } + PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n", buf->index); + PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n", buf->m.offset); + PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n", buf->bytesused); - case VIDIOC_QBUF: - { - struct v4l2_buffer *buf = arg; + return 0; +} - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n",buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (buf->index >= pwc_mbufs) - return -EINVAL; +static int pwc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n", buf->index); + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + if (buf->index >= pwc_mbufs) + return -EINVAL; - buf->flags |= V4L2_BUF_FLAG_QUEUED; - buf->flags &= ~V4L2_BUF_FLAG_DONE; + buf->flags |= V4L2_BUF_FLAG_QUEUED; + buf->flags &= ~V4L2_BUF_FLAG_DONE; - return 0; - } + return 0; +} - case VIDIOC_DQBUF: - { - struct v4l2_buffer *buf = arg; - int ret; +static int pwc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) +{ + DECLARE_WAITQUEUE(wait, current); + struct pwc_device *pdev = video_drvdata(file); + int ret; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n"); + PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n"); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; - /* Add ourselves to the frame wait-queue. - - FIXME: needs auditing for safety. - QUESTION: In what respect? I think that using the - frameq is safe now. - */ - add_wait_queue(&pdev->frameq, &wait); - while (pdev->full_frames == NULL) { - if (pdev->error_status) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -pdev->error_status; - } + add_wait_queue(&pdev->frameq, &wait); + while (pdev->full_frames == NULL) { + if (pdev->error_status) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -pdev->error_status; + } - if (signal_pending(current)) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -ERESTARTSYS; - } - schedule(); - set_current_state(TASK_INTERRUPTIBLE); - } + if (signal_pending(current)) { remove_wait_queue(&pdev->frameq, &wait); set_current_state(TASK_RUNNING); + return -ERESTARTSYS; + } + mutex_unlock(&pdev->modlock); + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + mutex_lock(&pdev->modlock); + } + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n"); - /* Decompress data in pdev->images[pdev->fill_image] */ - ret = pwc_handle_frame(pdev); - if (ret) - return -EFAULT; - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n"); - - buf->index = pdev->fill_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->flags = V4L2_BUF_FLAG_MAPPED; - buf->field = V4L2_FIELD_NONE; - do_gettimeofday(&buf->timestamp); - buf->sequence = 0; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = pdev->fill_image * pdev->len_per_image; - buf->length = pdev->len_per_image; - pwc_next_image(pdev); - - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n",buf->index); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n",buf->length); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n",buf->m.offset); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n",buf->bytesused); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n"); - return 0; + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n"); + /* Decompress data in pdev->images[pdev->fill_image] */ + ret = pwc_handle_frame(pdev); + if (ret) + return -EFAULT; + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n"); + + buf->index = pdev->fill_image; + if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) + buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); + else + buf->bytesused = pdev->view.size; + buf->flags = V4L2_BUF_FLAG_MAPPED; + buf->field = V4L2_FIELD_NONE; + do_gettimeofday(&buf->timestamp); + buf->sequence = 0; + buf->memory = V4L2_MEMORY_MMAP; + buf->m.offset = pdev->fill_image * pdev->len_per_image; + buf->length = pdev->len_per_image; + pwc_next_image(pdev); + + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n", buf->index); + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n", buf->length); + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n", buf->m.offset); + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n", buf->bytesused); + PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n"); + return 0; - } +} - case VIDIOC_STREAMON: - { - return pwc_isoc_init(pdev); - } +static int pwc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) +{ + struct pwc_device *pdev = video_drvdata(file); - case VIDIOC_STREAMOFF: - { - pwc_isoc_cleanup(pdev); - return 0; - } + return pwc_isoc_init(pdev); +} - case VIDIOC_ENUM_FRAMESIZES: - { - struct v4l2_frmsizeenum *fsize = arg; - unsigned int i = 0, index = fsize->index; - - if (fsize->pixel_format == V4L2_PIX_FMT_YUV420) { - for (i = 0; i < PSZ_MAX; i++) { - if (pdev->image_mask & (1UL << i)) { - if (!index--) { - fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; - fsize->discrete.width = pwc_image_sizes[i].x; - fsize->discrete.height = pwc_image_sizes[i].y; - return 0; - } - } - } - } else if (fsize->index == 0 && - ((fsize->pixel_format == V4L2_PIX_FMT_PWC1 && DEVICE_USE_CODEC1(pdev->type)) || - (fsize->pixel_format == V4L2_PIX_FMT_PWC2 && DEVICE_USE_CODEC23(pdev->type)))) { - - fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; - fsize->discrete.width = pdev->abs_max.x; - fsize->discrete.height = pdev->abs_max.y; - return 0; - } - return -EINVAL; - } +static int pwc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) +{ + struct pwc_device *pdev = video_drvdata(file); - case VIDIOC_ENUM_FRAMEINTERVALS: - { - struct v4l2_frmivalenum *fival = arg; - int size = -1; - unsigned int i; - - for (i = 0; i < PSZ_MAX; i++) { - if (pwc_image_sizes[i].x == fival->width && - pwc_image_sizes[i].y == fival->height) { - size = i; - break; + pwc_isoc_cleanup(pdev); + return 0; +} + +static int pwc_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct pwc_device *pdev = video_drvdata(file); + unsigned int i = 0, index = fsize->index; + + if (fsize->pixel_format == V4L2_PIX_FMT_YUV420) { + for (i = 0; i < PSZ_MAX; i++) { + if (pdev->image_mask & (1UL << i)) { + if (!index--) { + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = pwc_image_sizes[i].x; + fsize->discrete.height = pwc_image_sizes[i].y; + return 0; } } + } + } else if (fsize->index == 0 && + ((fsize->pixel_format == V4L2_PIX_FMT_PWC1 && DEVICE_USE_CODEC1(pdev->type)) || + (fsize->pixel_format == V4L2_PIX_FMT_PWC2 && DEVICE_USE_CODEC23(pdev->type)))) { + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = pdev->abs_max.x; + fsize->discrete.height = pdev->abs_max.y; + return 0; + } + return -EINVAL; +} - /* TODO: Support raw format */ - if (size < 0 || fival->pixel_format != V4L2_PIX_FMT_YUV420) { - return -EINVAL; - } +static int pwc_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct pwc_device *pdev = video_drvdata(file); + int size = -1; + unsigned int i; + + for (i = 0; i < PSZ_MAX; i++) { + if (pwc_image_sizes[i].x == fival->width && + pwc_image_sizes[i].y == fival->height) { + size = i; + break; + } + } - i = pwc_get_fps(pdev, fival->index, size); - if (!i) - return -EINVAL; + /* TODO: Support raw format */ + if (size < 0 || fival->pixel_format != V4L2_PIX_FMT_YUV420) + return -EINVAL; - fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; - fival->discrete.numerator = 1; - fival->discrete.denominator = i; + i = pwc_get_fps(pdev, fival->index, size); + if (!i) + return -EINVAL; - return 0; - } + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.numerator = 1; + fival->discrete.denominator = i; - default: - return pwc_ioctl(pdev, cmd, arg); - } /* ..switch */ return 0; } +static long pwc_default(struct file *file, void *fh, bool valid_prio, + int cmd, void *arg) +{ + struct pwc_device *pdev = video_drvdata(file); + + return pwc_ioctl(pdev, cmd, arg); +} + +const struct v4l2_ioctl_ops pwc_ioctl_ops = { + .vidioc_querycap = pwc_querycap, + .vidioc_enum_input = pwc_enum_input, + .vidioc_g_input = pwc_g_input, + .vidioc_s_input = pwc_s_input, + .vidioc_enum_fmt_vid_cap = pwc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = pwc_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = pwc_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = pwc_try_fmt_vid_cap, + .vidioc_queryctrl = pwc_queryctrl, + .vidioc_g_ctrl = pwc_g_ctrl, + .vidioc_s_ctrl = pwc_s_ctrl, + .vidioc_reqbufs = pwc_reqbufs, + .vidioc_querybuf = pwc_querybuf, + .vidioc_qbuf = pwc_qbuf, + .vidioc_dqbuf = pwc_dqbuf, + .vidioc_streamon = pwc_streamon, + .vidioc_streamoff = pwc_streamoff, + .vidioc_enum_framesizes = pwc_enum_framesizes, + .vidioc_enum_frameintervals = pwc_enum_frameintervals, + .vidioc_default = pwc_default, +}; + + /* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 16bbc6df9b07..e947766337d6 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -339,8 +339,7 @@ extern int pwc_camera_power(struct pwc_device *pdev, int power); /* Private ioctl()s; see pwc-ioctl.h */ extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg); -/** Functions in pwc-v4l.c */ -extern long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg); +extern const struct v4l2_ioctl_ops pwc_ioctl_ops; /** pwc-uncompress.c */ /* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 2f500809f53d..95f8b4e11e46 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -27,13 +27,13 @@ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-mem2mem.h> -#include <media/videobuf-core.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> #include "fimc-core.h" static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *isp_info) + struct s5p_fimc_isp_info *isp_info) { struct i2c_adapter *i2c_adap; struct fimc_vid_cap *vid_cap = &fimc->vid_cap; @@ -86,19 +86,19 @@ static void fimc_subdev_unregister(struct fimc_dev *fimc) static int fimc_subdev_attach(struct fimc_dev *fimc, int index) { struct fimc_vid_cap *vid_cap = &fimc->vid_cap; - struct s3c_platform_fimc *pdata = fimc->pdata; - struct s3c_fimc_isp_info *isp_info; + struct s5p_platform_fimc *pdata = fimc->pdata; + struct s5p_fimc_isp_info *isp_info; struct v4l2_subdev *sd; int i; - for (i = 0; i < FIMC_MAX_CAMIF_CLIENTS; ++i) { - isp_info = pdata->isp_info[i]; + for (i = 0; i < pdata->num_clients; ++i) { + isp_info = &pdata->isp_info[i]; - if (!isp_info || (index >= 0 && i != index)) + if (index >= 0 && i != index) continue; sd = fimc_subdev_register(fimc, isp_info); - if (sd) { + if (!IS_ERR_OR_NULL(sd)) { vid_cap->sd = sd; vid_cap->input_index = i; @@ -113,60 +113,42 @@ static int fimc_subdev_attach(struct fimc_dev *fimc, int index) return -ENODEV; } -static int fimc_isp_subdev_init(struct fimc_dev *fimc, int index) +static int fimc_isp_subdev_init(struct fimc_dev *fimc, unsigned int index) { - struct s3c_fimc_isp_info *isp_info; + struct s5p_fimc_isp_info *isp_info; + struct s5p_platform_fimc *pdata = fimc->pdata; int ret; - ret = fimc_subdev_attach(fimc, index); - if (ret) - return ret; + if (index >= pdata->num_clients) + return -EINVAL; - isp_info = fimc->pdata->isp_info[fimc->vid_cap.input_index]; - ret = fimc_hw_set_camera_polarity(fimc, isp_info); - if (!ret) { - ret = v4l2_subdev_call(fimc->vid_cap.sd, core, - s_power, 1); - if (!ret) - return ret; - } + isp_info = &pdata->isp_info[index]; - fimc_subdev_unregister(fimc); - err("ISP initialization failed: %d", ret); - return ret; -} + if (isp_info->clk_frequency) + clk_set_rate(fimc->clock[CLK_CAM], isp_info->clk_frequency); -/* - * At least one buffer on the pending_buf_q queue is required. - * Locking: The caller holds fimc->slock spinlock. - */ -int fimc_vid_cap_buf_queue(struct fimc_dev *fimc, - struct fimc_vid_buffer *fimc_vb) -{ - struct fimc_vid_cap *cap = &fimc->vid_cap; - struct fimc_ctx *ctx = cap->ctx; - int ret = 0; + ret = clk_enable(fimc->clock[CLK_CAM]); + if (ret) + return ret; - BUG_ON(!fimc || !fimc_vb); + ret = fimc_subdev_attach(fimc, index); + if (ret) + return ret; - ret = fimc_prepare_addr(ctx, fimc_vb, &ctx->d_frame, - &fimc_vb->paddr); + ret = fimc_hw_set_camera_polarity(fimc, isp_info); if (ret) return ret; - if (test_bit(ST_CAPT_STREAM, &fimc->state)) { - fimc_pending_queue_add(cap, fimc_vb); - } else { - /* Setup the buffer directly for processing. */ - int buf_id = (cap->reqbufs_count == 1) ? -1 : cap->buf_index; - fimc_hw_set_output_addr(fimc, &fimc_vb->paddr, buf_id); + ret = v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 1); + if (!ret) + return ret; + + /* enabling power failed so unregister subdev */ + fimc_subdev_unregister(fimc); - fimc_vb->index = cap->buf_index; - active_queue_add(cap, fimc_vb); + v4l2_err(&fimc->vid_cap.v4l2_dev, "ISP initialization failed: %d\n", + ret); - if (++cap->buf_index >= FIMC_MAX_OUT_BUFS) - cap->buf_index = 0; - } return ret; } @@ -174,7 +156,7 @@ static int fimc_stop_capture(struct fimc_dev *fimc) { unsigned long flags; struct fimc_vid_cap *cap; - int ret; + struct fimc_vid_buffer *buf; cap = &fimc->vid_cap; @@ -187,24 +169,224 @@ static int fimc_stop_capture(struct fimc_dev *fimc) spin_unlock_irqrestore(&fimc->slock, flags); wait_event_timeout(fimc->irq_queue, - test_bit(ST_CAPT_SHUT, &fimc->state), + !test_bit(ST_CAPT_SHUT, &fimc->state), FIMC_SHUTDOWN_TIMEOUT); - ret = v4l2_subdev_call(cap->sd, video, s_stream, 0); - if (ret) - v4l2_err(&fimc->vid_cap.v4l2_dev, "s_stream(0) failed\n"); + v4l2_subdev_call(cap->sd, video, s_stream, 0); spin_lock_irqsave(&fimc->slock, flags); fimc->state &= ~(1 << ST_CAPT_RUN | 1 << ST_CAPT_PEND | - 1 << ST_CAPT_STREAM); + 1 << ST_CAPT_SHUT | 1 << ST_CAPT_STREAM); fimc->vid_cap.active_buf_cnt = 0; + + /* Release buffers that were enqueued in the driver by videobuf2. */ + while (!list_empty(&cap->pending_buf_q)) { + buf = pending_queue_pop(cap); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + + while (!list_empty(&cap->active_buf_q)) { + buf = active_queue_pop(cap); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irqrestore(&fimc->slock, flags); dbg("state: 0x%lx", fimc->state); return 0; } +static int start_streaming(struct vb2_queue *q) +{ + struct fimc_ctx *ctx = q->drv_priv; + struct fimc_dev *fimc = ctx->fimc_dev; + struct s5p_fimc_isp_info *isp_info; + int ret; + + fimc_hw_reset(fimc); + + ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) + return ret; + + ret = fimc_prepare_config(ctx, ctx->state); + if (ret) + return ret; + + isp_info = &fimc->pdata->isp_info[fimc->vid_cap.input_index]; + fimc_hw_set_camera_type(fimc, isp_info); + fimc_hw_set_camera_source(fimc, isp_info); + fimc_hw_set_camera_offset(fimc, &ctx->s_frame); + + if (ctx->state & FIMC_PARAMS) { + ret = fimc_set_scaler_info(ctx); + if (ret) { + err("Scaler setup error"); + return ret; + } + fimc_hw_set_input_path(ctx); + fimc_hw_set_prescaler(ctx); + fimc_hw_set_mainscaler(ctx); + fimc_hw_set_target_format(ctx); + fimc_hw_set_rotation(ctx); + fimc_hw_set_effect(ctx); + } + + fimc_hw_set_output_path(ctx); + fimc_hw_set_out_dma(ctx); + + INIT_LIST_HEAD(&fimc->vid_cap.pending_buf_q); + INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q); + fimc->vid_cap.active_buf_cnt = 0; + fimc->vid_cap.frame_count = 0; + fimc->vid_cap.buf_index = 0; + + set_bit(ST_CAPT_PEND, &fimc->state); + + return 0; +} + +static int stop_streaming(struct vb2_queue *q) +{ + struct fimc_ctx *ctx = q->drv_priv; + struct fimc_dev *fimc = ctx->fimc_dev; + + if (!fimc_capture_active(fimc)) + return -EINVAL; + + return fimc_stop_capture(fimc); +} + +static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane) +{ + if (!fr || plane >= fr->fmt->memplanes) + return 0; + + dbg("%s: w: %d. h: %d. depth[%d]: %d", + __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]); + + return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8; + +} + +static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, + unsigned int *num_planes, unsigned long sizes[], + void *allocators[]) +{ + struct fimc_ctx *ctx = vq->drv_priv; + struct fimc_fmt *fmt = ctx->d_frame.fmt; + int i; + + if (!fmt) + return -EINVAL; + + *num_planes = fmt->memplanes; + + dbg("%s, buffer count=%d, plane count=%d", + __func__, *num_buffers, *num_planes); + + for (i = 0; i < fmt->memplanes; i++) { + sizes[i] = get_plane_size(&ctx->d_frame, i); + dbg("plane: %u, plane_size: %lu", i, sizes[i]); + allocators[i] = ctx->fimc_dev->alloc_ctx; + } + + return 0; +} + +static int buffer_init(struct vb2_buffer *vb) +{ + /* TODO: */ + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct fimc_ctx *ctx = vq->drv_priv; + struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev; + int i; + + if (!ctx->d_frame.fmt || vq->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return -EINVAL; + + for (i = 0; i < ctx->d_frame.fmt->memplanes; i++) { + unsigned long size = get_plane_size(&ctx->d_frame, i); + + if (vb2_plane_size(vb, i) < size) { + v4l2_err(v4l2_dev, "User buffer too small (%ld < %ld)\n", + vb2_plane_size(vb, i), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, i, size); + } + + return 0; +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct fimc_dev *fimc = ctx->fimc_dev; + struct fimc_vid_buffer *buf + = container_of(vb, struct fimc_vid_buffer, vb); + struct fimc_vid_cap *vid_cap = &fimc->vid_cap; + unsigned long flags; + int min_bufs; + + spin_lock_irqsave(&fimc->slock, flags); + fimc_prepare_addr(ctx, &buf->vb, &ctx->d_frame, &buf->paddr); + + if (!test_bit(ST_CAPT_STREAM, &fimc->state) + && vid_cap->active_buf_cnt < FIMC_MAX_OUT_BUFS) { + /* Setup the buffer directly for processing. */ + int buf_id = (vid_cap->reqbufs_count == 1) ? -1 : + vid_cap->buf_index; + + fimc_hw_set_output_addr(fimc, &buf->paddr, buf_id); + buf->index = vid_cap->buf_index; + active_queue_add(vid_cap, buf); + + if (++vid_cap->buf_index >= FIMC_MAX_OUT_BUFS) + vid_cap->buf_index = 0; + } else { + fimc_pending_queue_add(vid_cap, buf); + } + + min_bufs = vid_cap->reqbufs_count > 1 ? 2 : 1; + + if (vid_cap->active_buf_cnt >= min_bufs && + !test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) + fimc_activate_capture(ctx); + + spin_unlock_irqrestore(&fimc->slock, flags); +} + +static void fimc_lock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_lock(&ctx->fimc_dev->lock); +} + +static void fimc_unlock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_unlock(&ctx->fimc_dev->lock); +} + +static struct vb2_ops fimc_capture_qops = { + .queue_setup = queue_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_init = buffer_init, + .wait_prepare = fimc_unlock, + .wait_finish = fimc_lock, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +}; + static int fimc_capture_open(struct file *file) { struct fimc_dev *fimc = video_drvdata(file); @@ -216,44 +398,36 @@ static int fimc_capture_open(struct file *file) if (fimc_m2m_active(fimc)) return -EBUSY; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - if (++fimc->vid_cap.refcnt == 1) { - ret = fimc_isp_subdev_init(fimc, -1); + ret = fimc_isp_subdev_init(fimc, 0); if (ret) { fimc->vid_cap.refcnt--; - ret = -EIO; + return -EIO; } } file->private_data = fimc->vid_cap.ctx; - mutex_unlock(&fimc->lock); - return ret; + return 0; } static int fimc_capture_close(struct file *file) { struct fimc_dev *fimc = video_drvdata(file); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); if (--fimc->vid_cap.refcnt == 0) { fimc_stop_capture(fimc); - - videobuf_stop(&fimc->vid_cap.vbq); - videobuf_mmap_free(&fimc->vid_cap.vbq); + vb2_queue_release(&fimc->vid_cap.vbq); v4l2_err(&fimc->vid_cap.v4l2_dev, "releasing ISP\n"); + v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 0); + clk_disable(fimc->clock[CLK_CAM]); fimc_subdev_unregister(fimc); } - mutex_unlock(&fimc->lock); return 0; } @@ -262,32 +436,16 @@ static unsigned int fimc_capture_poll(struct file *file, { struct fimc_ctx *ctx = file->private_data; struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; - int ret; - - if (mutex_lock_interruptible(&fimc->lock)) - return POLLERR; - ret = videobuf_poll_stream(file, &cap->vbq, wait); - mutex_unlock(&fimc->lock); - - return ret; + return vb2_poll(&fimc->vid_cap.vbq, file, wait); } static int fimc_capture_mmap(struct file *file, struct vm_area_struct *vma) { struct fimc_ctx *ctx = file->private_data; struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; - int ret; - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - ret = videobuf_mmap_mapper(&cap->vbq, vma); - mutex_unlock(&fimc->lock); - - return ret; + return vb2_mmap(&fimc->vid_cap.vbq, vma); } /* video device file operations */ @@ -310,7 +468,8 @@ static int fimc_vidioc_querycap_capture(struct file *file, void *priv, strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); - cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE; + cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VIDEO_CAPTURE_MPLANE; return 0; } @@ -351,57 +510,52 @@ static int sync_capture_fmt(struct fimc_ctx *ctx) return 0; } -static int fimc_cap_s_fmt(struct file *file, void *priv, - struct v4l2_format *f) +static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; struct fimc_frame *frame; - struct v4l2_pix_format *pix; + struct v4l2_pix_format_mplane *pix; int ret; + int i; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) return -EINVAL; - ret = fimc_vidioc_try_fmt(file, priv, f); + ret = fimc_vidioc_try_fmt_mplane(file, priv, f); if (ret) return ret; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - - if (fimc_capture_active(fimc)) { - ret = -EBUSY; - goto sf_unlock; - } + if (vb2_is_streaming(&fimc->vid_cap.vbq) || fimc_capture_active(fimc)) + return -EBUSY; frame = &ctx->d_frame; - pix = &f->fmt.pix; + pix = &f->fmt.pix_mp; frame->fmt = find_format(f, FMT_FLAGS_M2M | FMT_FLAGS_CAM); if (!frame->fmt) { err("fimc target format not found\n"); - ret = -EINVAL; - goto sf_unlock; + return -EINVAL; } + for (i = 0; i < frame->fmt->colplanes; i++) + frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + /* Output DMA frame pixel size and offsets. */ - frame->f_width = pix->bytesperline * 8 / frame->fmt->depth; + frame->f_width = pix->plane_fmt[0].bytesperline * 8 + / frame->fmt->depth[0]; frame->f_height = pix->height; frame->width = pix->width; frame->height = pix->height; frame->o_width = pix->width; frame->o_height = pix->height; - frame->size = (pix->width * pix->height * frame->fmt->depth) >> 3; frame->offs_h = 0; frame->offs_v = 0; - ret = sync_capture_fmt(ctx); - ctx->state |= (FIMC_PARAMS | FIMC_DST_FMT); -sf_unlock: - mutex_unlock(&fimc->lock); + ret = sync_capture_fmt(ctx); return ret; } @@ -409,15 +563,13 @@ static int fimc_cap_enum_input(struct file *file, void *priv, struct v4l2_input *i) { struct fimc_ctx *ctx = priv; - struct s3c_platform_fimc *pldata = ctx->fimc_dev->pdata; - struct s3c_fimc_isp_info *isp_info; + struct s5p_platform_fimc *pldata = ctx->fimc_dev->pdata; + struct s5p_fimc_isp_info *isp_info; - if (i->index >= FIMC_MAX_CAMIF_CLIENTS) + if (i->index >= pldata->num_clients) return -EINVAL; - isp_info = pldata->isp_info[i->index]; - if (isp_info == NULL) - return -EINVAL; + isp_info = &pldata->isp_info[i->index]; i->type = V4L2_INPUT_TYPE_CAMERA; strncpy(i->name, isp_info->board_info->type, 32); @@ -429,34 +581,27 @@ static int fimc_cap_s_input(struct file *file, void *priv, { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; - struct s3c_platform_fimc *pdata = fimc->pdata; - int ret; + struct s5p_platform_fimc *pdata = fimc->pdata; if (fimc_capture_active(ctx->fimc_dev)) return -EBUSY; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + if (i >= pdata->num_clients) + return -EINVAL; - if (i >= FIMC_MAX_CAMIF_CLIENTS || !pdata->isp_info[i]) { - ret = -EINVAL; - goto si_unlock; - } if (fimc->vid_cap.sd) { - ret = v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 0); + int ret = v4l2_subdev_call(fimc->vid_cap.sd, core, s_power, 0); if (ret) err("s_power failed: %d", ret); + + clk_disable(fimc->clock[CLK_CAM]); } /* Release the attached sensor subdevice. */ fimc_subdev_unregister(fimc); - ret = fimc_isp_subdev_init(fimc, i); - -si_unlock: - mutex_unlock(&fimc->lock); - return ret; + return fimc_isp_subdev_init(fimc, i); } static int fimc_cap_g_input(struct file *file, void *priv, @@ -470,66 +615,20 @@ static int fimc_cap_g_input(struct file *file, void *priv, } static int fimc_cap_streamon(struct file *file, void *priv, - enum v4l2_buf_type type) + enum v4l2_buf_type type) { - struct s3c_fimc_isp_info *isp_info; struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; - int ret = -EBUSY; - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; if (fimc_capture_active(fimc) || !fimc->vid_cap.sd) - goto s_unlock; + return -EBUSY; if (!(ctx->state & FIMC_DST_FMT)) { v4l2_err(&fimc->vid_cap.v4l2_dev, "Format is not set\n"); - ret = -EINVAL; - goto s_unlock; - } - - ret = v4l2_subdev_call(fimc->vid_cap.sd, video, s_stream, 1); - if (ret && ret != -ENOIOCTLCMD) - goto s_unlock; - - ret = fimc_prepare_config(ctx, ctx->state); - if (ret) - goto s_unlock; - - isp_info = fimc->pdata->isp_info[fimc->vid_cap.input_index]; - fimc_hw_set_camera_type(fimc, isp_info); - fimc_hw_set_camera_source(fimc, isp_info); - fimc_hw_set_camera_offset(fimc, &ctx->s_frame); - - if (ctx->state & FIMC_PARAMS) { - ret = fimc_set_scaler_info(ctx); - if (ret) { - err("Scaler setup error"); - goto s_unlock; - } - fimc_hw_set_input_path(ctx); - fimc_hw_set_scaler(ctx); - fimc_hw_set_target_format(ctx); - fimc_hw_set_rotation(ctx); - fimc_hw_set_effect(ctx); + return -EINVAL; } - fimc_hw_set_output_path(ctx); - fimc_hw_set_out_dma(ctx); - - INIT_LIST_HEAD(&fimc->vid_cap.pending_buf_q); - INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q); - fimc->vid_cap.active_buf_cnt = 0; - fimc->vid_cap.frame_count = 0; - fimc->vid_cap.buf_index = fimc_hw_get_frame_index(fimc); - - set_bit(ST_CAPT_PEND, &fimc->state); - ret = videobuf_streamon(&fimc->vid_cap.vbq); - -s_unlock: - mutex_unlock(&fimc->lock); - return ret; + return vb2_streamon(&fimc->vid_cap.vbq, type); } static int fimc_cap_streamoff(struct file *file, void *priv, @@ -537,46 +636,22 @@ static int fimc_cap_streamoff(struct file *file, void *priv, { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; - unsigned long flags; - int ret; - - spin_lock_irqsave(&fimc->slock, flags); - if (!fimc_capture_running(fimc) && !fimc_capture_pending(fimc)) { - spin_unlock_irqrestore(&fimc->slock, flags); - dbg("state: 0x%lx", fimc->state); - return -EINVAL; - } - spin_unlock_irqrestore(&fimc->slock, flags); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - - fimc_stop_capture(fimc); - ret = videobuf_streamoff(&cap->vbq); - mutex_unlock(&fimc->lock); - return ret; + return vb2_streamoff(&fimc->vid_cap.vbq, type); } static int fimc_cap_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *reqbufs) + struct v4l2_requestbuffers *reqbufs) { struct fimc_ctx *ctx = priv; - struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; + struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap; int ret; - if (fimc_capture_active(ctx->fimc_dev)) - return -EBUSY; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - - ret = videobuf_reqbufs(&cap->vbq, reqbufs); + ret = vb2_reqbufs(&cap->vbq, reqbufs); if (!ret) cap->reqbufs_count = reqbufs->count; - mutex_unlock(&fimc->lock); return ret; } @@ -586,43 +661,23 @@ static int fimc_cap_querybuf(struct file *file, void *priv, struct fimc_ctx *ctx = priv; struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap; - if (fimc_capture_active(ctx->fimc_dev)) - return -EBUSY; - - return videobuf_querybuf(&cap->vbq, buf); + return vb2_querybuf(&cap->vbq, buf); } static int fimc_cap_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { struct fimc_ctx *ctx = priv; - struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; - int ret; - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - - ret = videobuf_qbuf(&cap->vbq, buf); - - mutex_unlock(&fimc->lock); - return ret; + struct fimc_vid_cap *cap = &ctx->fimc_dev->vid_cap; + return vb2_qbuf(&cap->vbq, buf); } static int fimc_cap_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) { struct fimc_ctx *ctx = priv; - int ret; - - if (mutex_lock_interruptible(&ctx->fimc_dev->lock)) - return -ERESTARTSYS; - - ret = videobuf_dqbuf(&ctx->fimc_dev->vid_cap.vbq, buf, + return vb2_dqbuf(&ctx->fimc_dev->vid_cap.vbq, buf, file->f_flags & O_NONBLOCK); - - mutex_unlock(&ctx->fimc_dev->lock); - return ret; } static int fimc_cap_s_ctrl(struct file *file, void *priv, @@ -631,9 +686,6 @@ static int fimc_cap_s_ctrl(struct file *file, void *priv, struct fimc_ctx *ctx = priv; int ret = -EINVAL; - if (mutex_lock_interruptible(&ctx->fimc_dev->lock)) - return -ERESTARTSYS; - /* Allow any controls but 90/270 rotation while streaming */ if (!fimc_capture_active(ctx->fimc_dev) || ctrl->id != V4L2_CID_ROTATE || @@ -648,8 +700,6 @@ static int fimc_cap_s_ctrl(struct file *file, void *priv, if (ret == -EINVAL) ret = v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd, core, s_ctrl, ctrl); - - mutex_unlock(&ctx->fimc_dev->lock); return ret; } @@ -658,22 +708,18 @@ static int fimc_cap_cropcap(struct file *file, void *fh, { struct fimc_frame *f; struct fimc_ctx *ctx = fh; - struct fimc_dev *fimc = ctx->fimc_dev; - if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) return -EINVAL; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - f = &ctx->s_frame; + cr->bounds.left = 0; cr->bounds.top = 0; cr->bounds.width = f->o_width; cr->bounds.height = f->o_height; cr->defrect = cr->bounds; - mutex_unlock(&fimc->lock); return 0; } @@ -681,19 +727,14 @@ static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr) { struct fimc_frame *f; struct fimc_ctx *ctx = file->private_data; - struct fimc_dev *fimc = ctx->fimc_dev; - - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; f = &ctx->s_frame; + cr->c.left = f->offs_h; cr->c.top = f->offs_v; cr->c.width = f->width; cr->c.height = f->height; - mutex_unlock(&fimc->lock); return 0; } @@ -712,41 +753,38 @@ static int fimc_cap_s_crop(struct file *file, void *fh, if (ret) return ret; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - if (!(ctx->state & FIMC_DST_FMT)) { v4l2_err(&fimc->vid_cap.v4l2_dev, "Capture color format not set\n"); - goto sc_unlock; + return -EINVAL; /* TODO: make sure this is the right value */ } f = &ctx->s_frame; /* Check for the pixel scaling ratio when cropping input image. */ - ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame); + ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height, + ctx->d_frame.width, ctx->d_frame.height, + ctx->rotation); if (ret) { - v4l2_err(&fimc->vid_cap.v4l2_dev, "Out of the scaler range"); - } else { - ret = 0; - f->offs_h = cr->c.left; - f->offs_v = cr->c.top; - f->width = cr->c.width; - f->height = cr->c.height; + v4l2_err(&fimc->vid_cap.v4l2_dev, "Out of the scaler range\n"); + return ret; } -sc_unlock: - mutex_unlock(&fimc->lock); - return ret; + f->offs_h = cr->c.left; + f->offs_v = cr->c.top; + f->width = cr->c.width; + f->height = cr->c.height; + + return 0; } static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = { .vidioc_querycap = fimc_vidioc_querycap_capture, - .vidioc_enum_fmt_vid_cap = fimc_vidioc_enum_fmt, - .vidioc_try_fmt_vid_cap = fimc_vidioc_try_fmt, - .vidioc_s_fmt_vid_cap = fimc_cap_s_fmt, - .vidioc_g_fmt_vid_cap = fimc_vidioc_g_fmt, + .vidioc_enum_fmt_vid_cap_mplane = fimc_vidioc_enum_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = fimc_vidioc_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = fimc_cap_s_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = fimc_vidioc_g_fmt_mplane, .vidioc_reqbufs = fimc_cap_reqbufs, .vidioc_querybuf = fimc_cap_querybuf, @@ -770,6 +808,7 @@ static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = { .vidioc_g_input = fimc_cap_g_input, }; +/* fimc->lock must be already initialized */ int fimc_register_capture_device(struct fimc_dev *fimc) { struct v4l2_device *v4l2_dev = &fimc->vid_cap.v4l2_dev; @@ -777,6 +816,8 @@ int fimc_register_capture_device(struct fimc_dev *fimc) struct fimc_vid_cap *vid_cap; struct fimc_ctx *ctx; struct v4l2_format f; + struct fimc_frame *fr; + struct vb2_queue *q; int ret; ctx = kzalloc(sizeof *ctx, GFP_KERNEL); @@ -788,8 +829,12 @@ int fimc_register_capture_device(struct fimc_dev *fimc) ctx->out_path = FIMC_DMA; ctx->state = FIMC_CTX_CAP; - f.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB24; - ctx->d_frame.fmt = find_format(&f, FMT_FLAGS_M2M); + /* Default format of the output frames */ + f.fmt.pix.pixelformat = V4L2_PIX_FMT_RGB32; + fr = &ctx->d_frame; + fr->fmt = find_format(&f, FMT_FLAGS_M2M); + fr->width = fr->f_width = fr->o_width = 640; + fr->height = fr->f_height = fr->o_height = 480; if (!v4l2_dev->name[0]) snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), @@ -812,6 +857,7 @@ int fimc_register_capture_device(struct fimc_dev *fimc) vfd->ioctl_ops = &fimc_capture_ioctl_ops; vfd->minor = -1; vfd->release = video_device_release; + vfd->lock = &fimc->lock; video_set_drvdata(vfd, fimc); vid_cap = &fimc->vid_cap; @@ -819,7 +865,7 @@ int fimc_register_capture_device(struct fimc_dev *fimc) vid_cap->active_buf_cnt = 0; vid_cap->reqbufs_count = 0; vid_cap->refcnt = 0; - /* The default color format for image sensor. */ + /* Default color format for image sensor */ vid_cap->fmt.code = V4L2_MBUS_FMT_YUYV8_2X8; INIT_LIST_HEAD(&vid_cap->pending_buf_q); @@ -827,10 +873,16 @@ int fimc_register_capture_device(struct fimc_dev *fimc) spin_lock_init(&ctx->slock); vid_cap->ctx = ctx; - videobuf_queue_dma_contig_init(&vid_cap->vbq, &fimc_qops, - vid_cap->v4l2_dev.dev, &fimc->irqlock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, - sizeof(struct fimc_vid_buffer), (void *)ctx, NULL); + q = &fimc->vid_cap.vbq; + memset(q, 0, sizeof(*q)); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = fimc->vid_cap.ctx; + q->ops = &fimc_capture_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct fimc_vid_buffer); + + vb2_queue_init(q); ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); if (ret) { diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 817aa66627f6..6c919b38a3d8 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -25,114 +25,141 @@ #include <linux/slab.h> #include <linux/clk.h> #include <media/v4l2-ioctl.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> #include "fimc-core.h" -static char *fimc_clock_name[NUM_FIMC_CLOCKS] = { "sclk_fimc", "fimc" }; +static char *fimc_clocks[MAX_FIMC_CLOCKS] = { + "sclk_fimc", "fimc", "sclk_cam" +}; static struct fimc_fmt fimc_formats[] = { { - .name = "RGB565", - .fourcc = V4L2_PIX_FMT_RGB565X, - .depth = 16, - .color = S5P_FIMC_RGB565, - .buff_cnt = 1, - .planes_cnt = 1, - .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_BE, - .flags = FMT_FLAGS_M2M, + .name = "RGB565", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = { 16 }, + .color = S5P_FIMC_RGB565, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_BE, + .flags = FMT_FLAGS_M2M, + }, { + .name = "BGR666", + .fourcc = V4L2_PIX_FMT_BGR666, + .depth = { 32 }, + .color = S5P_FIMC_RGB666, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M, + }, { + .name = "XRGB-8-8-8-8, 32 bpp", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = { 32 }, + .color = S5P_FIMC_RGB888, + .memplanes = 1, + .colplanes = 1, + .flags = FMT_FLAGS_M2M, + }, { + .name = "YUV 4:2:2 packed, YCbYCr", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = { 16 }, + .color = S5P_FIMC_YCBYCR422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, }, { - .name = "BGR666", - .fourcc = V4L2_PIX_FMT_BGR666, - .depth = 32, - .color = S5P_FIMC_RGB666, - .buff_cnt = 1, - .planes_cnt = 1, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:2 packed, CbYCrY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = { 16 }, + .color = S5P_FIMC_CBYCRY422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, }, { - .name = "XRGB-8-8-8-8, 32 bpp", - .fourcc = V4L2_PIX_FMT_RGB32, - .depth = 32, - .color = S5P_FIMC_RGB888, - .buff_cnt = 1, - .planes_cnt = 1, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:2 packed, CrYCbY", + .fourcc = V4L2_PIX_FMT_VYUY, + .depth = { 16 }, + .color = S5P_FIMC_CRYCBY422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, }, { - .name = "YUV 4:2:2 packed, YCbYCr", - .fourcc = V4L2_PIX_FMT_YUYV, - .depth = 16, - .color = S5P_FIMC_YCBYCR422, - .buff_cnt = 1, - .planes_cnt = 1, - .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, - .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + .name = "YUV 4:2:2 packed, YCrYCb", + .fourcc = V4L2_PIX_FMT_YVYU, + .depth = { 16 }, + .color = S5P_FIMC_YCRYCB422, + .memplanes = 1, + .colplanes = 1, + .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, + .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, }, { - .name = "YUV 4:2:2 packed, CbYCrY", - .fourcc = V4L2_PIX_FMT_UYVY, - .depth = 16, - .color = S5P_FIMC_CBYCRY422, - .buff_cnt = 1, - .planes_cnt = 1, - .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8, - .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + .name = "YUV 4:2:2 planar, Y/Cb/Cr", + .fourcc = V4L2_PIX_FMT_YUV422P, + .depth = { 12 }, + .color = S5P_FIMC_YCBYCR422, + .memplanes = 1, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:2 packed, CrYCbY", - .fourcc = V4L2_PIX_FMT_VYUY, - .depth = 16, - .color = S5P_FIMC_CRYCBY422, - .buff_cnt = 1, - .planes_cnt = 1, - .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8, - .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + .name = "YUV 4:2:2 planar, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV16, + .depth = { 16 }, + .color = S5P_FIMC_YCBYCR422, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:2 packed, YCrYCb", - .fourcc = V4L2_PIX_FMT_YVYU, - .depth = 16, - .color = S5P_FIMC_YCRYCB422, - .buff_cnt = 1, - .planes_cnt = 1, - .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8, - .flags = FMT_FLAGS_M2M | FMT_FLAGS_CAM, + .name = "YUV 4:2:2 planar, Y/CrCb", + .fourcc = V4L2_PIX_FMT_NV61, + .depth = { 16 }, + .color = S5P_FIMC_YCRYCB422, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:2 planar, Y/Cb/Cr", - .fourcc = V4L2_PIX_FMT_YUV422P, - .depth = 12, - .color = S5P_FIMC_YCBCR422, - .buff_cnt = 1, - .planes_cnt = 3, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:0 planar, YCbCr", + .fourcc = V4L2_PIX_FMT_YUV420, + .depth = { 12 }, + .color = S5P_FIMC_YCBCR420, + .memplanes = 1, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:2 planar, Y/CbCr", - .fourcc = V4L2_PIX_FMT_NV16, - .depth = 16, - .color = S5P_FIMC_YCBCR422, - .buff_cnt = 1, - .planes_cnt = 2, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:0 planar, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV12, + .depth = { 12 }, + .color = S5P_FIMC_YCBCR420, + .memplanes = 1, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:2 planar, Y/CrCb", - .fourcc = V4L2_PIX_FMT_NV61, - .depth = 16, - .color = S5P_FIMC_RGB565, - .buff_cnt = 1, - .planes_cnt = 2, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr", + .fourcc = V4L2_PIX_FMT_NV12M, + .color = S5P_FIMC_YCBCR420, + .depth = { 8, 4 }, + .memplanes = 2, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:0 planar, YCbCr", - .fourcc = V4L2_PIX_FMT_YUV420, - .depth = 12, - .color = S5P_FIMC_YCBCR420, - .buff_cnt = 1, - .planes_cnt = 3, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr", + .fourcc = V4L2_PIX_FMT_YUV420M, + .color = S5P_FIMC_YCBCR420, + .depth = { 8, 2, 2 }, + .memplanes = 3, + .colplanes = 3, + .flags = FMT_FLAGS_M2M, }, { - .name = "YUV 4:2:0 planar, Y/CbCr", - .fourcc = V4L2_PIX_FMT_NV12, - .depth = 12, - .color = S5P_FIMC_YCBCR420, - .buff_cnt = 1, - .planes_cnt = 2, - .flags = FMT_FLAGS_M2M, + .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled", + .fourcc = V4L2_PIX_FMT_NV12MT, + .color = S5P_FIMC_YCBCR420, + .depth = { 8, 4 }, + .memplanes = 2, + .colplanes = 2, + .flags = FMT_FLAGS_M2M, }, }; @@ -173,24 +200,21 @@ static struct v4l2_queryctrl *get_ctrl(int id) return NULL; } -int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f) +int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot) { - if (r->width > f->width) { - if (f->width > (r->width * SCALER_MAX_HRATIO)) - return -EINVAL; - } else { - if ((f->width * SCALER_MAX_HRATIO) < r->width) - return -EINVAL; - } + int tx, ty; - if (r->height > f->height) { - if (f->height > (r->height * SCALER_MAX_VRATIO)) - return -EINVAL; + if (rot == 90 || rot == 270) { + ty = dw; + tx = dh; } else { - if ((f->height * SCALER_MAX_VRATIO) < r->height) - return -EINVAL; + tx = dw; + ty = dh; } + if ((sw >= SCALER_MAX_HRATIO * tx) || (sh >= SCALER_MAX_VRATIO * ty)) + return -EINVAL; + return 0; } @@ -221,6 +245,7 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx) struct fimc_scaler *sc = &ctx->scaler; struct fimc_frame *s_frame = &ctx->s_frame; struct fimc_frame *d_frame = &ctx->d_frame; + struct samsung_fimc_variant *variant = ctx->fimc_dev->variant; int tx, ty, sx, sy; int ret; @@ -259,8 +284,14 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx) sc->pre_dst_width = sx / sc->pre_hratio; sc->pre_dst_height = sy / sc->pre_vratio; - sc->main_hratio = (sx << 8) / (tx << sc->hfactor); - sc->main_vratio = (sy << 8) / (ty << sc->vfactor); + if (variant->has_mainscaler_ext) { + sc->main_hratio = (sx << 14) / (tx << sc->hfactor); + sc->main_vratio = (sy << 14) / (ty << sc->vfactor); + } else { + sc->main_hratio = (sx << 8) / (tx << sc->hfactor); + sc->main_vratio = (sy << 8) / (ty << sc->vfactor); + + } sc->scaleup_h = (tx >= sx) ? 1 : 0; sc->scaleup_v = (ty >= sy) ? 1 : 0; @@ -276,14 +307,65 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx) return 0; } -static void fimc_capture_handler(struct fimc_dev *fimc) +static void fimc_m2m_job_finish(struct fimc_ctx *ctx, int vb_state) +{ + struct vb2_buffer *src_vb, *dst_vb; + struct fimc_dev *fimc = ctx->fimc_dev; + + if (!ctx || !ctx->m2m_ctx) + return; + + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + if (src_vb && dst_vb) { + v4l2_m2m_buf_done(src_vb, vb_state); + v4l2_m2m_buf_done(dst_vb, vb_state); + v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx); + } +} + +/* Complete the transaction which has been scheduled for execution. */ +static void fimc_m2m_shutdown(struct fimc_ctx *ctx) +{ + struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + if (!fimc_m2m_pending(fimc)) + return; + + fimc_ctx_state_lock_set(FIMC_CTX_SHUT, ctx); + + ret = wait_event_timeout(fimc->irq_queue, + !fimc_ctx_state_is_set(FIMC_CTX_SHUT, ctx), + FIMC_SHUTDOWN_TIMEOUT); + /* + * In case of a timeout the buffers are not released in the interrupt + * handler so return them here with the error flag set, if there are + * any on the queue. + */ + if (ret == 0) + fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); +} + +static int stop_streaming(struct vb2_queue *q) +{ + struct fimc_ctx *ctx = q->drv_priv; + + fimc_m2m_shutdown(ctx); + + return 0; +} + +static void fimc_capture_irq_handler(struct fimc_dev *fimc) { struct fimc_vid_cap *cap = &fimc->vid_cap; - struct fimc_vid_buffer *v_buf = NULL; + struct fimc_vid_buffer *v_buf; - if (!list_empty(&cap->active_buf_q)) { + if (!list_empty(&cap->active_buf_q) && + test_bit(ST_CAPT_RUN, &fimc->state)) { v_buf = active_queue_pop(cap); - fimc_buf_finish(fimc, v_buf); + vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE); } if (test_and_clear_bit(ST_CAPT_SHUT, &fimc->state)) { @@ -297,13 +379,6 @@ static void fimc_capture_handler(struct fimc_dev *fimc) fimc_hw_set_output_addr(fimc, &v_buf->paddr, cap->buf_index); v_buf->index = cap->buf_index; - dbg("hw ptr: %d, sw ptr: %d", - fimc_hw_get_frame_index(fimc), cap->buf_index); - - spin_lock(&fimc->irqlock); - v_buf->vb.state = VIDEOBUF_ACTIVE; - spin_unlock(&fimc->irqlock); - /* Move the buffer to the capture active queue */ active_queue_add(cap, v_buf); @@ -312,77 +387,79 @@ static void fimc_capture_handler(struct fimc_dev *fimc) if (++cap->buf_index >= FIMC_MAX_OUT_BUFS) cap->buf_index = 0; + } - } else if (test_and_clear_bit(ST_CAPT_STREAM, &fimc->state) && - cap->active_buf_cnt <= 1) { - fimc_deactivate_capture(fimc); + if (cap->active_buf_cnt == 0) { + clear_bit(ST_CAPT_RUN, &fimc->state); + + if (++cap->buf_index >= FIMC_MAX_OUT_BUFS) + cap->buf_index = 0; + } else { + set_bit(ST_CAPT_RUN, &fimc->state); } - dbg("frame: %d, active_buf_cnt= %d", + dbg("frame: %d, active_buf_cnt: %d", fimc_hw_get_frame_index(fimc), cap->active_buf_cnt); } static irqreturn_t fimc_isr(int irq, void *priv) { - struct fimc_vid_buffer *src_buf, *dst_buf; - struct fimc_ctx *ctx; struct fimc_dev *fimc = priv; + struct fimc_vid_cap *cap = &fimc->vid_cap; + struct fimc_ctx *ctx; - BUG_ON(!fimc); fimc_hw_clear_irq(fimc); - spin_lock(&fimc->slock); - if (test_and_clear_bit(ST_M2M_PEND, &fimc->state)) { ctx = v4l2_m2m_get_curr_priv(fimc->m2m.m2m_dev); - if (!ctx || !ctx->m2m_ctx) - goto isr_unlock; - src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); - dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); - if (src_buf && dst_buf) { - spin_lock(&fimc->irqlock); - src_buf->vb.state = dst_buf->vb.state = VIDEOBUF_DONE; - wake_up(&src_buf->vb.done); - wake_up(&dst_buf->vb.done); - spin_unlock(&fimc->irqlock); - v4l2_m2m_job_finish(fimc->m2m.m2m_dev, ctx->m2m_ctx); + if (ctx != NULL) { + fimc_m2m_job_finish(ctx, VB2_BUF_STATE_DONE); + + spin_lock(&ctx->slock); + if (ctx->state & FIMC_CTX_SHUT) { + ctx->state &= ~FIMC_CTX_SHUT; + wake_up(&fimc->irq_queue); + } + spin_unlock(&ctx->slock); } - goto isr_unlock; + return IRQ_HANDLED; } - if (test_bit(ST_CAPT_RUN, &fimc->state)) - fimc_capture_handler(fimc); + spin_lock(&fimc->slock); - if (test_and_clear_bit(ST_CAPT_PEND, &fimc->state)) { - set_bit(ST_CAPT_RUN, &fimc->state); - wake_up(&fimc->irq_queue); + if (test_bit(ST_CAPT_PEND, &fimc->state)) { + fimc_capture_irq_handler(fimc); + + if (cap->active_buf_cnt == 1) { + fimc_deactivate_capture(fimc); + clear_bit(ST_CAPT_STREAM, &fimc->state); + } } -isr_unlock: spin_unlock(&fimc->slock); return IRQ_HANDLED; } -/* The color format (planes_cnt, buff_cnt) must be already configured. */ -int fimc_prepare_addr(struct fimc_ctx *ctx, struct fimc_vid_buffer *buf, +/* The color format (colplanes, memplanes) must be already configured. */ +int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb, struct fimc_frame *frame, struct fimc_addr *paddr) { int ret = 0; u32 pix_size; - if (buf == NULL || frame == NULL) + if (vb == NULL || frame == NULL) return -EINVAL; pix_size = frame->width * frame->height; - dbg("buff_cnt= %d, planes_cnt= %d, frame->size= %d, pix_size= %d", - frame->fmt->buff_cnt, frame->fmt->planes_cnt, - frame->size, pix_size); + dbg("memplanes= %d, colplanes= %d, pix_size= %d", + frame->fmt->memplanes, frame->fmt->colplanes, pix_size); + + paddr->y = vb2_dma_contig_plane_paddr(vb, 0); - if (frame->fmt->buff_cnt == 1) { - paddr->y = videobuf_to_dma_contig(&buf->vb); - switch (frame->fmt->planes_cnt) { + if (frame->fmt->memplanes == 1) { + switch (frame->fmt->colplanes) { case 1: paddr->cb = 0; paddr->cr = 0; @@ -405,6 +482,12 @@ int fimc_prepare_addr(struct fimc_ctx *ctx, struct fimc_vid_buffer *buf, default: return -EINVAL; } + } else { + if (frame->fmt->memplanes >= 2) + paddr->cb = vb2_dma_contig_plane_paddr(vb, 1); + + if (frame->fmt->memplanes == 3) + paddr->cr = vb2_dma_contig_plane_paddr(vb, 2); } dbg("PHYS_ADDR: y= 0x%X cb= 0x%X cr= 0x%X ret= %d", @@ -423,34 +506,34 @@ static void fimc_set_yuv_order(struct fimc_ctx *ctx) /* Set order for 1 plane input formats. */ switch (ctx->s_frame.fmt->color) { case S5P_FIMC_YCRYCB422: - ctx->in_order_1p = S5P_FIMC_IN_YCRYCB; + ctx->in_order_1p = S5P_MSCTRL_ORDER422_CBYCRY; break; case S5P_FIMC_CBYCRY422: - ctx->in_order_1p = S5P_FIMC_IN_CBYCRY; + ctx->in_order_1p = S5P_MSCTRL_ORDER422_YCRYCB; break; case S5P_FIMC_CRYCBY422: - ctx->in_order_1p = S5P_FIMC_IN_CRYCBY; + ctx->in_order_1p = S5P_MSCTRL_ORDER422_YCBYCR; break; case S5P_FIMC_YCBYCR422: default: - ctx->in_order_1p = S5P_FIMC_IN_YCBYCR; + ctx->in_order_1p = S5P_MSCTRL_ORDER422_CRYCBY; break; } dbg("ctx->in_order_1p= %d", ctx->in_order_1p); switch (ctx->d_frame.fmt->color) { case S5P_FIMC_YCRYCB422: - ctx->out_order_1p = S5P_FIMC_OUT_YCRYCB; + ctx->out_order_1p = S5P_CIOCTRL_ORDER422_CBYCRY; break; case S5P_FIMC_CBYCRY422: - ctx->out_order_1p = S5P_FIMC_OUT_CBYCRY; + ctx->out_order_1p = S5P_CIOCTRL_ORDER422_YCRYCB; break; case S5P_FIMC_CRYCBY422: - ctx->out_order_1p = S5P_FIMC_OUT_CRYCBY; + ctx->out_order_1p = S5P_CIOCTRL_ORDER422_YCBYCR; break; case S5P_FIMC_YCBYCR422: default: - ctx->out_order_1p = S5P_FIMC_OUT_YCBYCR; + ctx->out_order_1p = S5P_CIOCTRL_ORDER422_CRYCBY; break; } dbg("ctx->out_order_1p= %d", ctx->out_order_1p); @@ -459,10 +542,14 @@ static void fimc_set_yuv_order(struct fimc_ctx *ctx) static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f) { struct samsung_fimc_variant *variant = ctx->fimc_dev->variant; + u32 i, depth = 0; + + for (i = 0; i < f->fmt->colplanes; i++) + depth += f->fmt->depth[i]; f->dma_offset.y_h = f->offs_h; if (!variant->pix_hoff) - f->dma_offset.y_h *= (f->fmt->depth >> 3); + f->dma_offset.y_h *= (depth >> 3); f->dma_offset.y_v = f->offs_v; @@ -473,7 +560,7 @@ static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f) f->dma_offset.cr_v = f->offs_v; if (!variant->pix_hoff) { - if (f->fmt->planes_cnt == 3) { + if (f->fmt->colplanes == 3) { f->dma_offset.cb_h >>= 1; f->dma_offset.cr_h >>= 1; } @@ -499,7 +586,7 @@ static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f) int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags) { struct fimc_frame *s_frame, *d_frame; - struct fimc_vid_buffer *buf = NULL; + struct vb2_buffer *vb = NULL; int ret = 0; s_frame = &ctx->s_frame; @@ -522,15 +609,15 @@ int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags) ctx->scaler.enabled = 1; if (flags & FIMC_SRC_ADDR) { - buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); - ret = fimc_prepare_addr(ctx, buf, s_frame, &s_frame->paddr); + vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + ret = fimc_prepare_addr(ctx, vb, s_frame, &s_frame->paddr); if (ret) return ret; } if (flags & FIMC_DST_ADDR) { - buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); - ret = fimc_prepare_addr(ctx, buf, d_frame, &d_frame->paddr); + vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + ret = fimc_prepare_addr(ctx, vb, d_frame, &d_frame->paddr); } return ret; @@ -553,26 +640,28 @@ static void fimc_dma_run(void *priv) ctx->state |= (FIMC_SRC_ADDR | FIMC_DST_ADDR); ret = fimc_prepare_config(ctx, ctx->state); - if (ret) { - err("Wrong parameters"); + if (ret) goto dma_unlock; - } + /* Reconfigure hardware if the context has changed. */ if (fimc->m2m.ctx != ctx) { ctx->state |= FIMC_PARAMS; fimc->m2m.ctx = ctx; } + spin_lock(&fimc->slock); fimc_hw_set_input_addr(fimc, &ctx->s_frame.paddr); if (ctx->state & FIMC_PARAMS) { fimc_hw_set_input_path(ctx); fimc_hw_set_in_dma(ctx); - if (fimc_set_scaler_info(ctx)) { - err("Scaler setup error"); + ret = fimc_set_scaler_info(ctx); + if (ret) { + spin_unlock(&fimc->slock); goto dma_unlock; } - fimc_hw_set_scaler(ctx); + fimc_hw_set_prescaler(ctx); + fimc_hw_set_mainscaler(ctx); fimc_hw_set_target_format(ctx); fimc_hw_set_rotation(ctx); fimc_hw_set_effect(ctx); @@ -587,8 +676,10 @@ static void fimc_dma_run(void *priv) fimc_activate_capture(ctx); - ctx->state &= (FIMC_CTX_M2M | FIMC_CTX_CAP); + ctx->state &= (FIMC_CTX_M2M | FIMC_CTX_CAP | + FIMC_SRC_FMT | FIMC_DST_FMT); fimc_hw_activate_input_dma(fimc, true); + spin_unlock(&fimc->slock); dma_unlock: spin_unlock_irqrestore(&ctx->slock, flags); @@ -596,109 +687,84 @@ dma_unlock: static void fimc_job_abort(void *priv) { - /* Nothing done in job_abort. */ + fimc_m2m_shutdown(priv); } -static void fimc_buf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, + unsigned int *num_planes, unsigned long sizes[], + void *allocators[]) { - videobuf_dma_contig_free(vq, vb); - vb->state = VIDEOBUF_NEEDS_INIT; -} + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + struct fimc_frame *f; + int i; -static int fimc_buf_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) -{ - struct fimc_ctx *ctx = vq->priv_data; - struct fimc_frame *frame; + f = ctx_get_frame(ctx, vq->type); + if (IS_ERR(f)) + return PTR_ERR(f); - frame = ctx_get_frame(ctx, vq->type); - if (IS_ERR(frame)) - return PTR_ERR(frame); + /* + * Return number of non-contigous planes (plane buffers) + * depending on the configured color format. + */ + if (f->fmt) + *num_planes = f->fmt->memplanes; + + for (i = 0; i < f->fmt->memplanes; i++) { + sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3; + allocators[i] = ctx->fimc_dev->alloc_ctx; + } + + if (*num_buffers == 0) + *num_buffers = 1; - *size = (frame->width * frame->height * frame->fmt->depth) >> 3; - if (0 == *count) - *count = 1; return 0; } -static int fimc_buf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, enum v4l2_field field) +static int fimc_buf_prepare(struct vb2_buffer *vb) { - struct fimc_ctx *ctx = vq->priv_data; - struct v4l2_device *v4l2_dev = &ctx->fimc_dev->m2m.v4l2_dev; + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); struct fimc_frame *frame; - int ret; + int i; - frame = ctx_get_frame(ctx, vq->type); + frame = ctx_get_frame(ctx, vb->vb2_queue->type); if (IS_ERR(frame)) return PTR_ERR(frame); - if (vb->baddr) { - if (vb->bsize < frame->size) { - v4l2_err(v4l2_dev, - "User-provided buffer too small (%d < %d)\n", - vb->bsize, frame->size); - WARN_ON(1); - return -EINVAL; - } - } else if (vb->state != VIDEOBUF_NEEDS_INIT - && vb->bsize < frame->size) { - return -EINVAL; - } - - vb->width = frame->width; - vb->height = frame->height; - vb->bytesperline = (frame->width * frame->fmt->depth) >> 3; - vb->size = frame->size; - vb->field = field; - - if (VIDEOBUF_NEEDS_INIT == vb->state) { - ret = videobuf_iolock(vq, vb, NULL); - if (ret) { - v4l2_err(v4l2_dev, "Iolock failed\n"); - fimc_buf_release(vq, vb); - return ret; - } - } - vb->state = VIDEOBUF_PREPARED; + for (i = 0; i < frame->fmt->memplanes; i++) + vb2_set_plane_payload(vb, i, frame->payload[i]); return 0; } -static void fimc_buf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void fimc_buf_queue(struct vb2_buffer *vb) { - struct fimc_ctx *ctx = vq->priv_data; - struct fimc_dev *fimc = ctx->fimc_dev; - struct fimc_vid_cap *cap = &fimc->vid_cap; - unsigned long flags; + struct fimc_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); dbg("ctx: %p, ctx->state: 0x%x", ctx, ctx->state); - if ((ctx->state & FIMC_CTX_M2M) && ctx->m2m_ctx) { - v4l2_m2m_buf_queue(ctx->m2m_ctx, vq, vb); - } else if (ctx->state & FIMC_CTX_CAP) { - spin_lock_irqsave(&fimc->slock, flags); - fimc_vid_cap_buf_queue(fimc, (struct fimc_vid_buffer *)vb); + if (ctx->m2m_ctx) + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} - dbg("fimc->cap.active_buf_cnt: %d", - fimc->vid_cap.active_buf_cnt); +static void fimc_lock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_lock(&ctx->fimc_dev->lock); +} - if (cap->active_buf_cnt >= cap->reqbufs_count || - cap->active_buf_cnt >= FIMC_MAX_OUT_BUFS) { - if (!test_and_set_bit(ST_CAPT_STREAM, &fimc->state)) - fimc_activate_capture(ctx); - } - spin_unlock_irqrestore(&fimc->slock, flags); - } +static void fimc_unlock(struct vb2_queue *vq) +{ + struct fimc_ctx *ctx = vb2_get_drv_priv(vq); + mutex_unlock(&ctx->fimc_dev->lock); } -struct videobuf_queue_ops fimc_qops = { - .buf_setup = fimc_buf_setup, - .buf_prepare = fimc_buf_prepare, - .buf_queue = fimc_buf_queue, - .buf_release = fimc_buf_release, +struct vb2_ops fimc_qops = { + .queue_setup = fimc_queue_setup, + .buf_prepare = fimc_buf_prepare, + .buf_queue = fimc_buf_queue, + .wait_prepare = fimc_unlock, + .wait_finish = fimc_lock, + .stop_streaming = stop_streaming, }; static int fimc_m2m_querycap(struct file *file, void *priv, @@ -712,12 +778,13 @@ static int fimc_m2m_querycap(struct file *file, void *priv, cap->bus_info[0] = 0; cap->version = KERNEL_VERSION(1, 0, 0); cap->capabilities = V4L2_CAP_STREAMING | - V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT; + V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; return 0; } -int fimc_vidioc_enum_fmt(struct file *file, void *priv, +int fimc_vidioc_enum_fmt_mplane(struct file *file, void *priv, struct v4l2_fmtdesc *f) { struct fimc_fmt *fmt; @@ -732,25 +799,39 @@ int fimc_vidioc_enum_fmt(struct file *file, void *priv, return 0; } -int fimc_vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +int fimc_vidioc_g_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) { struct fimc_ctx *ctx = priv; - struct fimc_dev *fimc = ctx->fimc_dev; struct fimc_frame *frame; + struct v4l2_pix_format_mplane *pixm; + int i; frame = ctx_get_frame(ctx, f->type); if (IS_ERR(frame)) return PTR_ERR(frame); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + pixm = &f->fmt.pix_mp; + + pixm->width = frame->width; + pixm->height = frame->height; + pixm->field = V4L2_FIELD_NONE; + pixm->pixelformat = frame->fmt->fourcc; + pixm->colorspace = V4L2_COLORSPACE_JPEG; + pixm->num_planes = frame->fmt->memplanes; + + for (i = 0; i < pixm->num_planes; ++i) { + int bpl = frame->o_width; - f->fmt.pix.width = frame->width; - f->fmt.pix.height = frame->height; - f->fmt.pix.field = V4L2_FIELD_NONE; - f->fmt.pix.pixelformat = frame->fmt->fourcc; + if (frame->fmt->colplanes == 1) /* packed formats */ + bpl = (bpl * frame->fmt->depth[0]) / 8; + + pixm->plane_fmt[i].bytesperline = bpl; + + pixm->plane_fmt[i].sizeimage = (frame->o_width * + frame->o_height * frame->fmt->depth[i]) / 8; + } - mutex_unlock(&fimc->lock); return 0; } @@ -785,42 +866,40 @@ struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f, } -int fimc_vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; struct samsung_fimc_variant *variant = fimc->variant; - struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; struct fimc_fmt *fmt; u32 max_width, mod_x, mod_y, mask; - int ret = -EINVAL, is_output = 0; + int i, is_output = 0; + - if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { - if (ctx->state & FIMC_CTX_CAP) + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx)) return -EINVAL; is_output = 1; - } else if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + } else if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { return -EINVAL; } - dbg("w: %d, h: %d, bpl: %d", - pix->width, pix->height, pix->bytesperline); - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + dbg("w: %d, h: %d", pix->width, pix->height); mask = is_output ? FMT_FLAGS_M2M : FMT_FLAGS_M2M | FMT_FLAGS_CAM; fmt = find_format(f, mask); if (!fmt) { v4l2_err(&fimc->m2m.v4l2_dev, "Fourcc format (0x%X) invalid.\n", pix->pixelformat); - goto tf_out; + return -EINVAL; } if (pix->field == V4L2_FIELD_ANY) pix->field = V4L2_FIELD_NONE; else if (V4L2_FIELD_NONE != pix->field) - goto tf_out; + return -EINVAL; if (is_output) { max_width = variant->pix_limit->scaler_dis_w; @@ -834,7 +913,7 @@ int fimc_vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) mod_x = 6; /* 64 x 32 pixels tile */ mod_y = 5; } else { - if (fimc->id == 1 && fimc->variant->pix_hoff) + if (fimc->id == 1 && variant->pix_hoff) mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1; else mod_y = mod_x; @@ -845,74 +924,72 @@ int fimc_vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) v4l_bound_align_image(&pix->width, 16, max_width, mod_x, &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0); - if (pix->bytesperline == 0 || - (pix->bytesperline * 8 / fmt->depth) > pix->width) - pix->bytesperline = (pix->width * fmt->depth) >> 3; + pix->num_planes = fmt->memplanes; + pix->colorspace = V4L2_COLORSPACE_JPEG; - if (pix->sizeimage == 0) - pix->sizeimage = pix->height * pix->bytesperline; + for (i = 0; i < pix->num_planes; ++i) { + int bpl = pix->plane_fmt[i].bytesperline; - dbg("w: %d, h: %d, bpl: %d, depth: %d", - pix->width, pix->height, pix->bytesperline, fmt->depth); + dbg("[%d] bpl: %d, depth: %d, w: %d, h: %d", + i, bpl, fmt->depth[i], pix->width, pix->height); - ret = 0; + if (!bpl || (bpl * 8 / fmt->depth[i]) > pix->width) + bpl = (pix->width * fmt->depth[0]) >> 3; -tf_out: - mutex_unlock(&fimc->lock); - return ret; + if (!pix->plane_fmt[i].sizeimage) + pix->plane_fmt[i].sizeimage = pix->height * bpl; + + pix->plane_fmt[i].bytesperline = bpl; + + dbg("[%d]: bpl: %d, sizeimage: %d", + i, pix->plane_fmt[i].bytesperline, + pix->plane_fmt[i].sizeimage); + } + + return 0; } -static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; - struct v4l2_device *v4l2_dev = &fimc->m2m.v4l2_dev; - struct videobuf_queue *vq; + struct vb2_queue *vq; struct fimc_frame *frame; - struct v4l2_pix_format *pix; - unsigned long flags; - int ret = 0; + struct v4l2_pix_format_mplane *pix; + int i, ret = 0; - ret = fimc_vidioc_try_fmt(file, priv, f); + ret = fimc_vidioc_try_fmt_mplane(file, priv, f); if (ret) return ret; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); - mutex_lock(&vq->vb_lock); - if (videobuf_queue_is_busy(vq)) { - v4l2_err(v4l2_dev, "%s: queue (%d) busy\n", __func__, f->type); - ret = -EBUSY; - goto sf_out; + if (vb2_is_streaming(vq)) { + v4l2_err(&fimc->m2m.v4l2_dev, "queue (%d) busy\n", f->type); + return -EBUSY; } - spin_lock_irqsave(&ctx->slock, flags); - if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { frame = &ctx->s_frame; - ctx->state |= FIMC_SRC_FMT; - } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { frame = &ctx->d_frame; - ctx->state |= FIMC_DST_FMT; } else { - spin_unlock_irqrestore(&ctx->slock, flags); - v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, + v4l2_err(&fimc->m2m.v4l2_dev, "Wrong buffer/video queue type (%d)\n", f->type); - ret = -EINVAL; - goto sf_out; + return -EINVAL; } - spin_unlock_irqrestore(&ctx->slock, flags); - pix = &f->fmt.pix; + pix = &f->fmt.pix_mp; frame->fmt = find_format(f, FMT_FLAGS_M2M); - if (!frame->fmt) { - ret = -EINVAL; - goto sf_out; - } + if (!frame->fmt) + return -EINVAL; - frame->f_width = pix->bytesperline * 8 / frame->fmt->depth; + for (i = 0; i < frame->fmt->colplanes; i++) + frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + + frame->f_width = pix->plane_fmt[0].bytesperline * 8 / + frame->fmt->depth[0]; frame->f_height = pix->height; frame->width = pix->width; frame->height = pix->height; @@ -920,19 +997,15 @@ static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f) frame->o_height = pix->height; frame->offs_h = 0; frame->offs_v = 0; - frame->size = (pix->width * pix->height * frame->fmt->depth) >> 3; - vq->field = pix->field; - spin_lock_irqsave(&ctx->slock, flags); - ctx->state |= FIMC_PARAMS; - spin_unlock_irqrestore(&ctx->slock, flags); + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + fimc_ctx_state_lock_set(FIMC_PARAMS | FIMC_DST_FMT, ctx); + else + fimc_ctx_state_lock_set(FIMC_PARAMS | FIMC_SRC_FMT, ctx); dbg("f_w: %d, f_h: %d", frame->f_width, frame->f_height); -sf_out: - mutex_unlock(&vq->vb_lock); - mutex_unlock(&fimc->lock); - return ret; + return 0; } static int fimc_m2m_reqbufs(struct file *file, void *priv, @@ -968,6 +1041,15 @@ static int fimc_m2m_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { struct fimc_ctx *ctx = priv; + + /* The source and target color format need to be set */ + if (V4L2_TYPE_IS_OUTPUT(type)) { + if (!fimc_ctx_state_is_set(FIMC_SRC_FMT, ctx)) + return -EINVAL; + } else if (!fimc_ctx_state_is_set(FIMC_DST_FMT, ctx)) { + return -EINVAL; + } + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); } @@ -991,12 +1073,9 @@ int fimc_vidioc_queryctrl(struct file *file, void *priv, return 0; } - if (ctx->state & FIMC_CTX_CAP) { - if (mutex_lock_interruptible(&ctx->fimc_dev->lock)) - return -ERESTARTSYS; - ret = v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd, + if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx)) { + return v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd, core, queryctrl, qc); - mutex_unlock(&ctx->fimc_dev->lock); } return ret; } @@ -1006,10 +1085,6 @@ int fimc_vidioc_g_ctrl(struct file *file, void *priv, { struct fimc_ctx *ctx = priv; struct fimc_dev *fimc = ctx->fimc_dev; - int ret = 0; - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; switch (ctrl->id) { case V4L2_CID_HFLIP: @@ -1022,19 +1097,17 @@ int fimc_vidioc_g_ctrl(struct file *file, void *priv, ctrl->value = ctx->rotation; break; default: - if (ctx->state & FIMC_CTX_CAP) { - ret = v4l2_subdev_call(fimc->vid_cap.sd, core, - g_ctrl, ctrl); + if (fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx)) { + return v4l2_subdev_call(fimc->vid_cap.sd, core, + g_ctrl, ctrl); } else { - v4l2_err(&fimc->m2m.v4l2_dev, - "Invalid control\n"); - ret = -EINVAL; + v4l2_err(&fimc->m2m.v4l2_dev, "Invalid control\n"); + return -EINVAL; } } dbg("ctrl->value= %d", ctrl->value); - mutex_unlock(&fimc->lock); - return ret; + return 0; } int check_ctrl_val(struct fimc_ctx *ctx, struct v4l2_control *ctrl) @@ -1058,16 +1131,7 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl) { struct samsung_fimc_variant *variant = ctx->fimc_dev->variant; struct fimc_dev *fimc = ctx->fimc_dev; - unsigned long flags; - - if (ctx->rotation != 0 && - (ctrl->id == V4L2_CID_HFLIP || ctrl->id == V4L2_CID_VFLIP)) { - v4l2_err(&fimc->m2m.v4l2_dev, - "Simultaneous flip and rotation is not supported\n"); - return -EINVAL; - } - - spin_lock_irqsave(&ctx->slock, flags); + int ret = 0; switch (ctrl->id) { case V4L2_CID_HFLIP: @@ -1085,29 +1149,36 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl) break; case V4L2_CID_ROTATE: + if (fimc_ctx_state_is_set(FIMC_DST_FMT | FIMC_SRC_FMT, ctx)) { + ret = fimc_check_scaler_ratio(ctx->s_frame.width, + ctx->s_frame.height, ctx->d_frame.width, + ctx->d_frame.height, ctrl->value); + } + + if (ret) { + v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range\n"); + return -EINVAL; + } + /* Check for the output rotator availability */ if ((ctrl->value == 90 || ctrl->value == 270) && - (ctx->in_path == FIMC_DMA && !variant->has_out_rot)) { - spin_unlock_irqrestore(&ctx->slock, flags); + (ctx->in_path == FIMC_DMA && !variant->has_out_rot)) return -EINVAL; - } else { - ctx->rotation = ctrl->value; - } + ctx->rotation = ctrl->value; break; default: - spin_unlock_irqrestore(&ctx->slock, flags); v4l2_err(&fimc->m2m.v4l2_dev, "Invalid control\n"); return -EINVAL; } - ctx->state |= FIMC_PARAMS; - spin_unlock_irqrestore(&ctx->slock, flags); + + fimc_ctx_state_lock_set(FIMC_PARAMS, ctx); return 0; } static int fimc_m2m_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) + struct v4l2_control *ctrl) { struct fimc_ctx *ctx = priv; int ret = 0; @@ -1125,22 +1196,17 @@ static int fimc_m2m_cropcap(struct file *file, void *fh, { struct fimc_frame *frame; struct fimc_ctx *ctx = fh; - struct fimc_dev *fimc = ctx->fimc_dev; frame = ctx_get_frame(ctx, cr->type); if (IS_ERR(frame)) return PTR_ERR(frame); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - cr->bounds.left = 0; cr->bounds.top = 0; cr->bounds.width = frame->f_width; cr->bounds.height = frame->f_height; cr->defrect = cr->bounds; - mutex_unlock(&fimc->lock); return 0; } @@ -1148,21 +1214,16 @@ static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr) { struct fimc_frame *frame; struct fimc_ctx *ctx = file->private_data; - struct fimc_dev *fimc = ctx->fimc_dev; frame = ctx_get_frame(ctx, cr->type); if (IS_ERR(frame)) return PTR_ERR(frame); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - cr->c.left = frame->offs_h; cr->c.top = frame->offs_v; cr->c.width = frame->width; cr->c.height = frame->height; - mutex_unlock(&fimc->lock); return 0; } @@ -1170,7 +1231,9 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) { struct fimc_dev *fimc = ctx->fimc_dev; struct fimc_frame *f; - u32 min_size, halign; + u32 min_size, halign, depth = 0; + bool is_capture_ctx; + int i; if (cr->c.top < 0 || cr->c.left < 0) { v4l2_err(&fimc->m2m.v4l2_dev, @@ -1178,10 +1241,12 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) return -EINVAL; } - if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - f = (ctx->state & FIMC_CTX_CAP) ? &ctx->s_frame : &ctx->d_frame; - else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && - ctx->state & FIMC_CTX_M2M) + is_capture_ctx = fimc_ctx_state_is_set(FIMC_CTX_CAP, ctx); + + if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + f = is_capture_ctx ? &ctx->s_frame : &ctx->d_frame; + else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE && + !is_capture_ctx) f = &ctx->s_frame; else return -EINVAL; @@ -1189,21 +1254,24 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) min_size = (f == &ctx->s_frame) ? fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize; - if (ctx->state & FIMC_CTX_M2M) { + /* Get pixel alignment constraints. */ + if (is_capture_ctx) { + min_size = 16; + halign = 4; + } else { if (fimc->id == 1 && fimc->variant->pix_hoff) halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1; else halign = ffs(min_size) - 1; - /* there are more strict aligment requirements at camera interface */ - } else { - min_size = 16; - halign = 4; } + for (i = 0; i < f->fmt->colplanes; i++) + depth += f->fmt->depth[i]; + v4l_bound_align_image(&cr->c.width, min_size, f->o_width, ffs(min_size) - 1, &cr->c.height, min_size, f->o_height, - halign, 64/(ALIGN(f->fmt->depth, 8))); + halign, 64/(ALIGN(depth, 8))); /* adjust left/top if cropping rectangle is out of bounds */ if (cr->c.left + cr->c.width > f->o_width) @@ -1212,8 +1280,7 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) cr->c.top = f->o_height - cr->c.height; cr->c.left = round_down(cr->c.left, min_size); - cr->c.top = round_down(cr->c.top, - ctx->state & FIMC_CTX_M2M ? 8 : 16); + cr->c.top = round_down(cr->c.top, is_capture_ctx ? 16 : 8); dbg("l:%d, t:%d, w:%d, h:%d, f_w: %d, f_h: %d", cr->c.left, cr->c.top, cr->c.width, cr->c.height, @@ -1222,12 +1289,10 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) return 0; } - static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr) { struct fimc_ctx *ctx = file->private_data; struct fimc_dev *fimc = ctx->fimc_dev; - unsigned long flags; struct fimc_frame *f; int ret; @@ -1235,52 +1300,52 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr) if (ret) return ret; - f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ? + f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? &ctx->s_frame : &ctx->d_frame; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; - - spin_lock_irqsave(&ctx->slock, flags); - if (~ctx->state & (FIMC_SRC_FMT | FIMC_DST_FMT)) { - /* Check to see if scaling ratio is within supported range */ - if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) - ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame); - else - ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame); + /* Check to see if scaling ratio is within supported range */ + if (fimc_ctx_state_is_set(FIMC_DST_FMT | FIMC_SRC_FMT, ctx)) { + if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height, + ctx->d_frame.width, + ctx->d_frame.height, + ctx->rotation); + } else { + ret = fimc_check_scaler_ratio(ctx->s_frame.width, + ctx->s_frame.height, + cr->c.width, cr->c.height, + ctx->rotation); + } if (ret) { - v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range"); - ret = -EINVAL; - goto scr_unlock; + v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range\n"); + return -EINVAL; } } - ctx->state |= FIMC_PARAMS; f->offs_h = cr->c.left; f->offs_v = cr->c.top; f->width = cr->c.width; f->height = cr->c.height; -scr_unlock: - spin_unlock_irqrestore(&ctx->slock, flags); - mutex_unlock(&fimc->lock); + fimc_ctx_state_lock_set(FIMC_PARAMS, ctx); + return 0; } static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = { .vidioc_querycap = fimc_m2m_querycap, - .vidioc_enum_fmt_vid_cap = fimc_vidioc_enum_fmt, - .vidioc_enum_fmt_vid_out = fimc_vidioc_enum_fmt, + .vidioc_enum_fmt_vid_cap_mplane = fimc_vidioc_enum_fmt_mplane, + .vidioc_enum_fmt_vid_out_mplane = fimc_vidioc_enum_fmt_mplane, - .vidioc_g_fmt_vid_cap = fimc_vidioc_g_fmt, - .vidioc_g_fmt_vid_out = fimc_vidioc_g_fmt, + .vidioc_g_fmt_vid_cap_mplane = fimc_vidioc_g_fmt_mplane, + .vidioc_g_fmt_vid_out_mplane = fimc_vidioc_g_fmt_mplane, - .vidioc_try_fmt_vid_cap = fimc_vidioc_try_fmt, - .vidioc_try_fmt_vid_out = fimc_vidioc_try_fmt, + .vidioc_try_fmt_vid_cap_mplane = fimc_vidioc_try_fmt_mplane, + .vidioc_try_fmt_vid_out_mplane = fimc_vidioc_try_fmt_mplane, - .vidioc_s_fmt_vid_cap = fimc_m2m_s_fmt, - .vidioc_s_fmt_vid_out = fimc_m2m_s_fmt, + .vidioc_s_fmt_vid_cap_mplane = fimc_m2m_s_fmt_mplane, + .vidioc_s_fmt_vid_out_mplane = fimc_m2m_s_fmt_mplane, .vidioc_reqbufs = fimc_m2m_reqbufs, .vidioc_querybuf = fimc_m2m_querybuf, @@ -1301,26 +1366,39 @@ static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = { }; -static void queue_init(void *priv, struct videobuf_queue *vq, - enum v4l2_buf_type type) +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) { struct fimc_ctx *ctx = priv; - struct fimc_dev *fimc = ctx->fimc_dev; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->ops = &fimc_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; - videobuf_queue_dma_contig_init(vq, &fimc_qops, - &fimc->pdev->dev, - &fimc->irqlock, type, V4L2_FIELD_NONE, - sizeof(struct fimc_vid_buffer), priv, NULL); + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->ops = &fimc_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + return vb2_queue_init(dst_vq); } static int fimc_m2m_open(struct file *file) { struct fimc_dev *fimc = video_drvdata(file); struct fimc_ctx *ctx = NULL; - int err = 0; - - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; dbg("pid: %d, state: 0x%lx, refcnt: %d", task_pid_nr(current), fimc->state, fimc->vid_cap.refcnt); @@ -1329,19 +1407,15 @@ static int fimc_m2m_open(struct file *file) * Return if the corresponding video capture node * is already opened. */ - if (fimc->vid_cap.refcnt > 0) { - err = -EBUSY; - goto err_unlock; - } + if (fimc->vid_cap.refcnt > 0) + return -EBUSY; fimc->m2m.refcnt++; set_bit(ST_OUTDMA_RUN, &fimc->state); ctx = kzalloc(sizeof *ctx, GFP_KERNEL); - if (!ctx) { - err = -ENOMEM; - goto err_unlock; - } + if (!ctx) + return -ENOMEM; file->private_data = ctx; ctx->fimc_dev = fimc; @@ -1355,15 +1429,14 @@ static int fimc_m2m_open(struct file *file) ctx->out_path = FIMC_DMA; spin_lock_init(&ctx->slock); - ctx->m2m_ctx = v4l2_m2m_ctx_init(ctx, fimc->m2m.m2m_dev, queue_init); + ctx->m2m_ctx = v4l2_m2m_ctx_init(fimc->m2m.m2m_dev, ctx, queue_init); if (IS_ERR(ctx->m2m_ctx)) { - err = PTR_ERR(ctx->m2m_ctx); + int err = PTR_ERR(ctx->m2m_ctx); kfree(ctx); + return err; } -err_unlock: - mutex_unlock(&fimc->lock); - return err; + return 0; } static int fimc_m2m_release(struct file *file) @@ -1371,8 +1444,6 @@ static int fimc_m2m_release(struct file *file) struct fimc_ctx *ctx = file->private_data; struct fimc_dev *fimc = ctx->fimc_dev; - mutex_lock(&fimc->lock); - dbg("pid: %d, state: 0x%lx, refcnt= %d", task_pid_nr(current), fimc->state, fimc->m2m.refcnt); @@ -1381,7 +1452,6 @@ static int fimc_m2m_release(struct file *file) if (--fimc->m2m.refcnt <= 0) clear_bit(ST_OUTDMA_RUN, &fimc->state); - mutex_unlock(&fimc->lock); return 0; } @@ -1415,7 +1485,6 @@ static struct v4l2_m2m_ops m2m_ops = { .job_abort = fimc_job_abort, }; - static int fimc_register_m2m_device(struct fimc_dev *fimc) { struct video_device *vfd; @@ -1448,6 +1517,7 @@ static int fimc_register_m2m_device(struct fimc_dev *fimc) vfd->ioctl_ops = &fimc_m2m_ioctl_ops; vfd->minor = -1; vfd->release = video_device_release; + vfd->lock = &fimc->lock; snprintf(vfd->name, sizeof(vfd->name), "%s:m2m", dev_name(&pdev->dev)); @@ -1496,7 +1566,7 @@ static void fimc_unregister_m2m_device(struct fimc_dev *fimc) static void fimc_clk_release(struct fimc_dev *fimc) { int i; - for (i = 0; i < NUM_FIMC_CLOCKS; i++) { + for (i = 0; i < fimc->num_clocks; i++) { if (fimc->clock[i]) { clk_disable(fimc->clock[i]); clk_put(fimc->clock[i]); @@ -1507,15 +1577,16 @@ static void fimc_clk_release(struct fimc_dev *fimc) static int fimc_clk_get(struct fimc_dev *fimc) { int i; - for (i = 0; i < NUM_FIMC_CLOCKS; i++) { - fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clock_name[i]); - if (IS_ERR(fimc->clock[i])) { - dev_err(&fimc->pdev->dev, - "failed to get fimc clock: %s\n", - fimc_clock_name[i]); - return -ENXIO; + for (i = 0; i < fimc->num_clocks; i++) { + fimc->clock[i] = clk_get(&fimc->pdev->dev, fimc_clocks[i]); + + if (!IS_ERR_OR_NULL(fimc->clock[i])) { + clk_enable(fimc->clock[i]); + continue; } - clk_enable(fimc->clock[i]); + dev_err(&fimc->pdev->dev, "failed to get fimc clock: %s\n", + fimc_clocks[i]); + return -ENXIO; } return 0; } @@ -1525,7 +1596,9 @@ static int fimc_probe(struct platform_device *pdev) struct fimc_dev *fimc; struct resource *res; struct samsung_fimc_driverdata *drv_data; + struct s5p_platform_fimc *pdata; int ret = 0; + int cap_input_index = -1; dev_dbg(&pdev->dev, "%s():\n", __func__); @@ -1545,10 +1618,10 @@ static int fimc_probe(struct platform_device *pdev) fimc->id = pdev->id; fimc->variant = drv_data->variant[fimc->id]; fimc->pdev = pdev; - fimc->pdata = pdev->dev.platform_data; + pdata = pdev->dev.platform_data; + fimc->pdata = pdata; fimc->state = ST_IDLE; - spin_lock_init(&fimc->irqlock); init_waitqueue_head(&fimc->irq_queue); spin_lock_init(&fimc->slock); @@ -1576,10 +1649,18 @@ static int fimc_probe(struct platform_device *pdev) goto err_req_region; } + fimc->num_clocks = MAX_FIMC_CLOCKS - 1; + + /* Check if a video capture node needs to be registered. */ + if (pdata && pdata->num_clients > 0) { + cap_input_index = 0; + fimc->num_clocks++; + } + ret = fimc_clk_get(fimc); if (ret) goto err_regs_unmap; - clk_set_rate(fimc->clock[0], drv_data->lclk_frequency); + clk_set_rate(fimc->clock[CLK_BUS], drv_data->lclk_frequency); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { @@ -1597,24 +1678,24 @@ static int fimc_probe(struct platform_device *pdev) goto err_clk; } + /* Initialize contiguous memory allocator */ + fimc->alloc_ctx = vb2_dma_contig_init_ctx(&fimc->pdev->dev); + if (IS_ERR(fimc->alloc_ctx)) { + ret = PTR_ERR(fimc->alloc_ctx); + goto err_irq; + } + ret = fimc_register_m2m_device(fimc); if (ret) goto err_irq; /* At least one camera sensor is required to register capture node */ - if (fimc->pdata) { - int i; - for (i = 0; i < FIMC_MAX_CAMIF_CLIENTS; ++i) - if (fimc->pdata->isp_info[i]) - break; - - if (i < FIMC_MAX_CAMIF_CLIENTS) { - ret = fimc_register_capture_device(fimc); - if (ret) - goto err_m2m; - } + if (cap_input_index >= 0) { + ret = fimc_register_capture_device(fimc); + if (ret) + goto err_m2m; + clk_disable(fimc->clock[CLK_CAM]); } - /* * Exclude the additional output DMA address registers by masking * them out on HW revisions that provide extended capabilites. @@ -1656,6 +1737,9 @@ static int __devexit fimc_remove(struct platform_device *pdev) fimc_unregister_capture_device(fimc); fimc_clk_release(fimc); + + vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); + iounmap(fimc->regs); release_resource(fimc->regs_res); kfree(fimc->regs_res); @@ -1726,6 +1810,7 @@ static struct samsung_fimc_variant fimc1_variant_s5pv210 = { .pix_hoff = 1, .has_inp_rot = 1, .has_out_rot = 1, + .has_mainscaler_ext = 1, .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 1, @@ -1747,6 +1832,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = { .has_inp_rot = 1, .has_out_rot = 1, .has_cistatus2 = 1, + .has_mainscaler_ext = 1, .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 1, @@ -1757,6 +1843,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = { static struct samsung_fimc_variant fimc2_variant_s5pv310 = { .pix_hoff = 1, .has_cistatus2 = 1, + .has_mainscaler_ext = 1, .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 1, diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 4f047d35f8ad..3beb1e5320ce 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -14,29 +14,27 @@ /*#define DEBUG*/ #include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/types.h> #include <linux/videodev2.h> -#include <media/videobuf-core.h> +#include <linux/io.h> +#include <media/videobuf2-core.h> #include <media/v4l2-device.h> #include <media/v4l2-mem2mem.h> #include <media/v4l2-mediabus.h> -#include <media/s3c_fimc.h> +#include <media/s5p_fimc.h> #include "regs-fimc.h" #define err(fmt, args...) \ printk(KERN_ERR "%s:%d: " fmt "\n", __func__, __LINE__, ##args) -#ifdef DEBUG #define dbg(fmt, args...) \ - printk(KERN_DEBUG "%s:%d: " fmt "\n", __func__, __LINE__, ##args) -#else -#define dbg(fmt, args...) -#endif + pr_debug("%s:%d: " fmt "\n", __func__, __LINE__, ##args) /* Time to wait for next frame VSYNC interrupt while stopping operation. */ #define FIMC_SHUTDOWN_TIMEOUT ((100*HZ)/1000) -#define NUM_FIMC_CLOCKS 2 +#define MAX_FIMC_CLOCKS 3 #define MODULE_NAME "s5p-fimc" #define FIMC_MAX_DEVS 4 #define FIMC_MAX_OUT_BUFS 4 @@ -44,7 +42,13 @@ #define SCALER_MAX_VRATIO 64 #define DMA_MIN_SIZE 8 -/* FIMC device state flags */ +/* indices to the clocks array */ +enum { + CLK_BUS, + CLK_GATE, + CLK_CAM, +}; + enum fimc_dev_flags { /* for m2m node */ ST_IDLE, @@ -63,20 +67,6 @@ enum fimc_dev_flags { #define fimc_capture_running(dev) test_bit(ST_CAPT_RUN, &(dev)->state) #define fimc_capture_pending(dev) test_bit(ST_CAPT_PEND, &(dev)->state) -#define fimc_capture_active(dev) \ - (test_bit(ST_CAPT_RUN, &(dev)->state) || \ - test_bit(ST_CAPT_PEND, &(dev)->state)) - -#define fimc_capture_streaming(dev) \ - test_bit(ST_CAPT_STREAM, &(dev)->state) - -#define fimc_buf_finish(dev, vid_buf) do { \ - spin_lock(&(dev)->irqlock); \ - (vid_buf)->vb.state = VIDEOBUF_DONE; \ - spin_unlock(&(dev)->irqlock); \ - wake_up(&(vid_buf)->vb.done); \ -} while (0) - enum fimc_datapath { FIMC_CAMERA, FIMC_DMA, @@ -90,7 +80,6 @@ enum fimc_color_fmt { S5P_FIMC_RGB888, S5P_FIMC_RGB30_LOCAL, S5P_FIMC_YCBCR420 = 0x20, - S5P_FIMC_YCBCR422, S5P_FIMC_YCBYCR422, S5P_FIMC_YCRYCB422, S5P_FIMC_CBYCRY422, @@ -100,18 +89,6 @@ enum fimc_color_fmt { #define fimc_fmt_is_rgb(x) ((x) & 0x10) -/* Y/Cb/Cr components order at DMA output for 1 plane YCbCr 4:2:2 formats. */ -#define S5P_FIMC_OUT_CRYCBY S5P_CIOCTRL_ORDER422_CRYCBY -#define S5P_FIMC_OUT_CBYCRY S5P_CIOCTRL_ORDER422_YCRYCB -#define S5P_FIMC_OUT_YCRYCB S5P_CIOCTRL_ORDER422_CBYCRY -#define S5P_FIMC_OUT_YCBYCR S5P_CIOCTRL_ORDER422_YCBYCR - -/* Input Y/Cb/Cr components order for 1 plane YCbCr 4:2:2 color formats. */ -#define S5P_FIMC_IN_CRYCBY S5P_MSCTRL_ORDER422_CRYCBY -#define S5P_FIMC_IN_CBYCRY S5P_MSCTRL_ORDER422_YCRYCB -#define S5P_FIMC_IN_YCRYCB S5P_MSCTRL_ORDER422_CBYCRY -#define S5P_FIMC_IN_YCBYCR S5P_MSCTRL_ORDER422_YCBYCR - /* Cb/Cr chrominance components order for 2 plane Y/CbCr 4:2:2 formats. */ #define S5P_FIMC_LSB_CRCB S5P_CIOCTRL_ORDER422_2P_LSB_CRCB @@ -131,6 +108,7 @@ enum fimc_color_fmt { #define FIMC_DST_FMT (1 << 4) #define FIMC_CTX_M2M (1 << 5) #define FIMC_CTX_CAP (1 << 6) +#define FIMC_CTX_SHUT (1 << 7) /* Image conversion flags */ #define FIMC_IN_DMA_ACCESS_TILED (1 << 0) @@ -157,18 +135,18 @@ enum fimc_color_fmt { * @name: format description * @fourcc: the fourcc code for this format, 0 if not applicable * @color: the corresponding fimc_color_fmt - * @depth: driver's private 'number of bits per pixel' - * @buff_cnt: number of physically non-contiguous data planes - * @planes_cnt: number of physically contiguous data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @memplanes: number of physically non-contiguous data planes + * @colplanes: number of physically contiguous data planes */ struct fimc_fmt { enum v4l2_mbus_pixelcode mbus_code; char *name; u32 fourcc; u32 color; - u16 buff_cnt; - u16 planes_cnt; - u16 depth; + u16 memplanes; + u16 colplanes; + u8 depth[VIDEO_MAX_PLANES]; u16 flags; #define FMT_FLAGS_CAM (1 << 0) #define FMT_FLAGS_M2M (1 << 1) @@ -260,7 +238,8 @@ struct fimc_addr { * @index: buffer index for the output DMA engine */ struct fimc_vid_buffer { - struct videobuf_buffer vb; + struct vb2_buffer vb; + struct list_head list; struct fimc_addr paddr; int index; }; @@ -277,7 +256,7 @@ struct fimc_vid_buffer { * @height: image pixel weight * @paddr: image frame buffer physical addresses * @buf_cnt: number of buffers depending on a color format - * @size: image size in bytes + * @payload: image size in bytes (w x h x bpp) * @color: color format * @dma_offset: DMA offset in bytes */ @@ -290,7 +269,7 @@ struct fimc_frame { u32 offs_v; u32 width; u32 height; - u32 size; + unsigned long payload[VIDEO_MAX_PLANES]; struct fimc_addr paddr; struct fimc_dma_offset dma_offset; struct fimc_fmt *fmt; @@ -331,13 +310,14 @@ struct fimc_m2m_device { */ struct fimc_vid_cap { struct fimc_ctx *ctx; + struct vb2_alloc_ctx *alloc_ctx; struct video_device *vfd; struct v4l2_device v4l2_dev; - struct v4l2_subdev *sd; + struct v4l2_subdev *sd;; struct v4l2_mbus_framefmt fmt; struct list_head pending_buf_q; struct list_head active_buf_q; - struct videobuf_queue vbq; + struct vb2_queue vbq; int active_buf_cnt; int buf_index; unsigned int frame_count; @@ -372,6 +352,8 @@ struct fimc_pix_limit { * @has_inp_rot: set if has input rotator * @has_out_rot: set if has output rotator * @has_cistatus2: 1 if CISTATUS2 register is present in this IP revision + * @has_mainscaler_ext: 1 if extended mainscaler ratios in CIEXTEN register + * are present in this IP revision * @pix_limit: pixel size constraints for the scaler * @min_inp_pixsize: minimum input pixel size * @min_out_pixsize: minimum output pixel size @@ -383,6 +365,7 @@ struct samsung_fimc_variant { unsigned int has_inp_rot:1; unsigned int has_out_rot:1; unsigned int has_cistatus2:1; + unsigned int has_mainscaler_ext:1; struct fimc_pix_limit *pix_limit; u16 min_inp_pixsize; u16 min_out_pixsize; @@ -412,12 +395,12 @@ struct fimc_ctx; * @lock: the mutex protecting this data structure * @pdev: pointer to the FIMC platform device * @pdata: pointer to the device platform data - * @id: FIMC device index (0..2) + * @id: FIMC device index (0..FIMC_MAX_DEVS) + * @num_clocks: the number of clocks managed by this device instance * @clock[]: the clocks required for FIMC operation * @regs: the mapped hardware registers * @regs_res: the resource claimed for IO registers * @irq: interrupt number of the FIMC subdevice - * @irqlock: spinlock protecting videobuffer queue * @irq_queue: * @m2m: memory-to-memory V4L2 device information * @vid_cap: camera capture device information @@ -427,18 +410,19 @@ struct fimc_dev { spinlock_t slock; struct mutex lock; struct platform_device *pdev; - struct s3c_platform_fimc *pdata; + struct s5p_platform_fimc *pdata; struct samsung_fimc_variant *variant; - int id; - struct clk *clock[NUM_FIMC_CLOCKS]; + u16 id; + u16 num_clocks; + struct clk *clock[MAX_FIMC_CLOCKS]; void __iomem *regs; struct resource *regs_res; int irq; - spinlock_t irqlock; wait_queue_head_t irq_queue; struct fimc_m2m_device m2m; struct fimc_vid_cap vid_cap; unsigned long state; + struct vb2_alloc_ctx *alloc_ctx; }; /** @@ -482,11 +466,41 @@ struct fimc_ctx { struct v4l2_m2m_ctx *m2m_ctx; }; -extern struct videobuf_queue_ops fimc_qops; +static inline bool fimc_capture_active(struct fimc_dev *fimc) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&fimc->slock, flags); + ret = !!(fimc->state & (1 << ST_CAPT_RUN) || + fimc->state & (1 << ST_CAPT_PEND)); + spin_unlock_irqrestore(&fimc->slock, flags); + return ret; +} + +static inline void fimc_ctx_state_lock_set(u32 state, struct fimc_ctx *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->slock, flags); + ctx->state |= state; + spin_unlock_irqrestore(&ctx->slock, flags); +} + +static inline bool fimc_ctx_state_is_set(u32 mask, struct fimc_ctx *ctx) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&ctx->slock, flags); + ret = (ctx->state & mask) == mask; + spin_unlock_irqrestore(&ctx->slock, flags); + return ret; +} static inline int tiled_fmt(struct fimc_fmt *fmt) { - return 0; + return fmt->fourcc == V4L2_PIX_FMT_NV12MT; } static inline void fimc_hw_clear_irq(struct fimc_dev *dev) @@ -542,12 +556,12 @@ static inline struct fimc_frame *ctx_get_frame(struct fimc_ctx *ctx, { struct fimc_frame *frame; - if (V4L2_BUF_TYPE_VIDEO_OUTPUT == type) { - if (ctx->state & FIMC_CTX_M2M) + if (V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE == type) { + if (fimc_ctx_state_is_set(FIMC_CTX_M2M, ctx)) frame = &ctx->s_frame; else return ERR_PTR(-EINVAL); - } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE == type) { + } else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) { frame = &ctx->d_frame; } else { v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, @@ -581,7 +595,8 @@ void fimc_hw_set_target_format(struct fimc_ctx *ctx); void fimc_hw_set_out_dma(struct fimc_ctx *ctx); void fimc_hw_en_lastirq(struct fimc_dev *fimc, int enable); void fimc_hw_en_irq(struct fimc_dev *fimc, int enable); -void fimc_hw_set_scaler(struct fimc_ctx *ctx); +void fimc_hw_set_prescaler(struct fimc_ctx *ctx); +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx); void fimc_hw_en_capture(struct fimc_ctx *ctx); void fimc_hw_set_effect(struct fimc_ctx *ctx); void fimc_hw_set_in_dma(struct fimc_ctx *ctx); @@ -589,23 +604,23 @@ void fimc_hw_set_input_path(struct fimc_ctx *ctx); void fimc_hw_set_output_path(struct fimc_ctx *ctx); void fimc_hw_set_input_addr(struct fimc_dev *fimc, struct fimc_addr *paddr); void fimc_hw_set_output_addr(struct fimc_dev *fimc, struct fimc_addr *paddr, - int index); + int index); int fimc_hw_set_camera_source(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam); + struct s5p_fimc_isp_info *cam); int fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f); int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam); + struct s5p_fimc_isp_info *cam); int fimc_hw_set_camera_type(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam); + struct s5p_fimc_isp_info *cam); /* -----------------------------------------------------*/ /* fimc-core.c */ -int fimc_vidioc_enum_fmt(struct file *file, void *priv, - struct v4l2_fmtdesc *f); -int fimc_vidioc_g_fmt(struct file *file, void *priv, - struct v4l2_format *f); -int fimc_vidioc_try_fmt(struct file *file, void *priv, - struct v4l2_format *f); +int fimc_vidioc_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f); +int fimc_vidioc_g_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f); +int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f); int fimc_vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc); int fimc_vidioc_g_ctrl(struct file *file, void *priv, @@ -619,10 +634,10 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask); struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f, unsigned int mask); -int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f); +int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot); int fimc_set_scaler_info(struct fimc_ctx *ctx); int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags); -int fimc_prepare_addr(struct fimc_ctx *ctx, struct fimc_vid_buffer *buf, +int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb, struct fimc_frame *frame, struct fimc_addr *paddr); /* -----------------------------------------------------*/ @@ -649,28 +664,27 @@ static inline void fimc_deactivate_capture(struct fimc_dev *fimc) } /* - * Add video buffer to the active buffers queue. - * The caller holds irqlock spinlock. + * Add buf to the capture active buffers queue. + * Locking: Need to be called with fimc_dev::slock held. */ static inline void active_queue_add(struct fimc_vid_cap *vid_cap, - struct fimc_vid_buffer *buf) + struct fimc_vid_buffer *buf) { - buf->vb.state = VIDEOBUF_ACTIVE; - list_add_tail(&buf->vb.queue, &vid_cap->active_buf_q); + list_add_tail(&buf->list, &vid_cap->active_buf_q); vid_cap->active_buf_cnt++; } /* * Pop a video buffer from the capture active buffers queue - * Locking: Need to be called with dev->slock held. + * Locking: Need to be called with fimc_dev::slock held. */ static inline struct fimc_vid_buffer * active_queue_pop(struct fimc_vid_cap *vid_cap) { struct fimc_vid_buffer *buf; buf = list_entry(vid_cap->active_buf_q.next, - struct fimc_vid_buffer, vb.queue); - list_del(&buf->vb.queue); + struct fimc_vid_buffer, list); + list_del(&buf->list); vid_cap->active_buf_cnt--; return buf; } @@ -679,8 +693,7 @@ active_queue_pop(struct fimc_vid_cap *vid_cap) static inline void fimc_pending_queue_add(struct fimc_vid_cap *vid_cap, struct fimc_vid_buffer *buf) { - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vid_cap->pending_buf_q); + list_add_tail(&buf->list, &vid_cap->pending_buf_q); } /* Add video buffer to the capture pending buffers queue */ @@ -689,10 +702,9 @@ pending_queue_pop(struct fimc_vid_cap *vid_cap) { struct fimc_vid_buffer *buf; buf = list_entry(vid_cap->pending_buf_q.next, - struct fimc_vid_buffer, vb.queue); - list_del(&buf->vb.queue); + struct fimc_vid_buffer, list); + list_del(&buf->list); return buf; } - #endif /* FIMC_CORE_H_ */ diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c index 511631a2e5c3..4d929a394521 100644 --- a/drivers/media/video/s5p-fimc/fimc-reg.c +++ b/drivers/media/video/s5p-fimc/fimc-reg.c @@ -13,7 +13,7 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/map.h> -#include <media/s3c_fimc.h> +#include <media/s5p_fimc.h> #include "fimc-core.h" @@ -37,11 +37,11 @@ void fimc_hw_reset(struct fimc_dev *dev) writel(cfg, dev->regs + S5P_CIGCTRL); } -static u32 fimc_hw_get_in_flip(u32 ctx_flip) +static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx) { u32 flip = S5P_MSCTRL_FLIP_NORMAL; - switch (ctx_flip) { + switch (ctx->flip) { case FLIP_X_AXIS: flip = S5P_MSCTRL_FLIP_X_MIRROR; break; @@ -51,16 +51,20 @@ static u32 fimc_hw_get_in_flip(u32 ctx_flip) case FLIP_XY_AXIS: flip = S5P_MSCTRL_FLIP_180; break; + default: + break; } + if (ctx->rotation <= 90) + return flip; - return flip; + return (flip ^ S5P_MSCTRL_FLIP_180) & S5P_MSCTRL_FLIP_180; } -static u32 fimc_hw_get_target_flip(u32 ctx_flip) +static u32 fimc_hw_get_target_flip(struct fimc_ctx *ctx) { u32 flip = S5P_CITRGFMT_FLIP_NORMAL; - switch (ctx_flip) { + switch (ctx->flip) { case FLIP_X_AXIS: flip = S5P_CITRGFMT_FLIP_X_MIRROR; break; @@ -70,11 +74,13 @@ static u32 fimc_hw_get_target_flip(u32 ctx_flip) case FLIP_XY_AXIS: flip = S5P_CITRGFMT_FLIP_180; break; - case FLIP_NONE: + default: break; - } - return flip; + if (ctx->rotation <= 90) + return flip; + + return (flip ^ S5P_CITRGFMT_FLIP_180) & S5P_CITRGFMT_FLIP_180; } void fimc_hw_set_rotation(struct fimc_ctx *ctx) @@ -84,10 +90,7 @@ void fimc_hw_set_rotation(struct fimc_ctx *ctx) cfg = readl(dev->regs + S5P_CITRGFMT); cfg &= ~(S5P_CITRGFMT_INROT90 | S5P_CITRGFMT_OUTROT90 | - S5P_CITRGFMT_FLIP_180); - - flip = readl(dev->regs + S5P_MSCTRL); - flip &= ~S5P_MSCTRL_FLIP_MASK; + S5P_CITRGFMT_FLIP_180); /* * The input and output rotator cannot work simultaneously. @@ -95,26 +98,22 @@ void fimc_hw_set_rotation(struct fimc_ctx *ctx) * in direct fifo output mode. */ if (ctx->rotation == 90 || ctx->rotation == 270) { - if (ctx->out_path == FIMC_LCDFIFO) { - cfg |= S5P_CITRGFMT_INROT90; - if (ctx->rotation == 270) - flip |= S5P_MSCTRL_FLIP_180; - } else { - cfg |= S5P_CITRGFMT_OUTROT90; - if (ctx->rotation == 270) - cfg |= S5P_CITRGFMT_FLIP_180; - } - } else if (ctx->rotation == 180) { if (ctx->out_path == FIMC_LCDFIFO) - flip |= S5P_MSCTRL_FLIP_180; + cfg |= S5P_CITRGFMT_INROT90; else - cfg |= S5P_CITRGFMT_FLIP_180; + cfg |= S5P_CITRGFMT_OUTROT90; } - if (ctx->rotation == 180 || ctx->rotation == 270) - writel(flip, dev->regs + S5P_MSCTRL); - cfg |= fimc_hw_get_target_flip(ctx->flip); - writel(cfg, dev->regs + S5P_CITRGFMT); + if (ctx->out_path == FIMC_DMA) { + cfg |= fimc_hw_get_target_flip(ctx); + writel(cfg, dev->regs + S5P_CITRGFMT); + } else { + /* LCD FIFO path */ + flip = readl(dev->regs + S5P_MSCTRL); + flip &= ~S5P_MSCTRL_FLIP_MASK; + flip |= fimc_hw_get_in_flip(ctx); + writel(flip, dev->regs + S5P_MSCTRL); + } } void fimc_hw_set_target_format(struct fimc_ctx *ctx) @@ -131,19 +130,14 @@ void fimc_hw_set_target_format(struct fimc_ctx *ctx) S5P_CITRGFMT_VSIZE_MASK); switch (frame->fmt->color) { - case S5P_FIMC_RGB565: - case S5P_FIMC_RGB666: - case S5P_FIMC_RGB888: + case S5P_FIMC_RGB565...S5P_FIMC_RGB888: cfg |= S5P_CITRGFMT_RGB; break; case S5P_FIMC_YCBCR420: cfg |= S5P_CITRGFMT_YCBCR420; break; - case S5P_FIMC_YCBYCR422: - case S5P_FIMC_YCRYCB422: - case S5P_FIMC_CBYCRY422: - case S5P_FIMC_CRYCBY422: - if (frame->fmt->planes_cnt == 1) + case S5P_FIMC_YCBYCR422...S5P_FIMC_CRYCBY422: + if (frame->fmt->colplanes == 1) cfg |= S5P_CITRGFMT_YCBCR422_1P; else cfg |= S5P_CITRGFMT_YCBCR422; @@ -219,11 +213,11 @@ void fimc_hw_set_out_dma(struct fimc_ctx *ctx) cfg &= ~(S5P_CIOCTRL_ORDER2P_MASK | S5P_CIOCTRL_ORDER422_MASK | S5P_CIOCTRL_YCBCR_PLANE_MASK); - if (frame->fmt->planes_cnt == 1) + if (frame->fmt->colplanes == 1) cfg |= ctx->out_order_1p; - else if (frame->fmt->planes_cnt == 2) + else if (frame->fmt->colplanes == 2) cfg |= ctx->out_order_2p | S5P_CIOCTRL_YCBCR_2PLANE; - else if (frame->fmt->planes_cnt == 3) + else if (frame->fmt->colplanes == 3) cfg |= S5P_CIOCTRL_YCBCR_3PLANE; writel(cfg, dev->regs + S5P_CIOCTRL); @@ -249,7 +243,7 @@ void fimc_hw_en_lastirq(struct fimc_dev *dev, int enable) writel(cfg, dev->regs + S5P_CIOCTRL); } -static void fimc_hw_set_prescaler(struct fimc_ctx *ctx) +void fimc_hw_set_prescaler(struct fimc_ctx *ctx) { struct fimc_dev *dev = ctx->fimc_dev; struct fimc_scaler *sc = &ctx->scaler; @@ -267,7 +261,7 @@ static void fimc_hw_set_prescaler(struct fimc_ctx *ctx) writel(cfg, dev->regs + S5P_CISCPREDST); } -void fimc_hw_set_scaler(struct fimc_ctx *ctx) +static void fimc_hw_set_scaler(struct fimc_ctx *ctx) { struct fimc_dev *dev = ctx->fimc_dev; struct fimc_scaler *sc = &ctx->scaler; @@ -275,8 +269,6 @@ void fimc_hw_set_scaler(struct fimc_ctx *ctx) struct fimc_frame *dst_frame = &ctx->d_frame; u32 cfg = 0; - fimc_hw_set_prescaler(ctx); - if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW)) cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE); @@ -316,13 +308,42 @@ void fimc_hw_set_scaler(struct fimc_ctx *ctx) cfg |= S5P_CISCCTRL_INTERLACE; } + writel(cfg, dev->regs + S5P_CISCCTRL); +} + +void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) +{ + struct fimc_dev *dev = ctx->fimc_dev; + struct samsung_fimc_variant *variant = dev->variant; + struct fimc_scaler *sc = &ctx->scaler; + u32 cfg; + dbg("main_hratio= 0x%X main_vratio= 0x%X", sc->main_hratio, sc->main_vratio); - cfg |= S5P_CISCCTRL_SC_HORRATIO(sc->main_hratio); - cfg |= S5P_CISCCTRL_SC_VERRATIO(sc->main_vratio); + fimc_hw_set_scaler(ctx); - writel(cfg, dev->regs + S5P_CISCCTRL); + cfg = readl(dev->regs + S5P_CISCCTRL); + + if (variant->has_mainscaler_ext) { + cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); + cfg |= S5P_CISCCTRL_MHRATIO_EXT(sc->main_hratio); + cfg |= S5P_CISCCTRL_MVRATIO_EXT(sc->main_vratio); + writel(cfg, dev->regs + S5P_CISCCTRL); + + cfg = readl(dev->regs + S5P_CIEXTEN); + + cfg &= ~(S5P_CIEXTEN_MVRATIO_EXT_MASK | + S5P_CIEXTEN_MHRATIO_EXT_MASK); + cfg |= S5P_CIEXTEN_MHRATIO_EXT(sc->main_hratio); + cfg |= S5P_CIEXTEN_MVRATIO_EXT(sc->main_vratio); + writel(cfg, dev->regs + S5P_CIEXTEN); + } else { + cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); + cfg |= S5P_CISCCTRL_MHRATIO(sc->main_hratio); + cfg |= S5P_CISCCTRL_MVRATIO(sc->main_vratio); + writel(cfg, dev->regs + S5P_CISCCTRL); + } } void fimc_hw_en_capture(struct fimc_ctx *ctx) @@ -410,41 +431,37 @@ void fimc_hw_set_in_dma(struct fimc_ctx *ctx) /* Set the input DMA to process single frame only. */ cfg = readl(dev->regs + S5P_MSCTRL); - cfg &= ~(S5P_MSCTRL_FLIP_MASK - | S5P_MSCTRL_INFORMAT_MASK + cfg &= ~(S5P_MSCTRL_INFORMAT_MASK | S5P_MSCTRL_IN_BURST_COUNT_MASK | S5P_MSCTRL_INPUT_MASK | S5P_MSCTRL_C_INT_IN_MASK | S5P_MSCTRL_2P_IN_ORDER_MASK); - cfg |= (S5P_MSCTRL_FRAME_COUNT(1) | S5P_MSCTRL_INPUT_MEMORY); + cfg |= (S5P_MSCTRL_IN_BURST_COUNT(4) + | S5P_MSCTRL_INPUT_MEMORY + | S5P_MSCTRL_FIFO_CTRL_FULL); switch (frame->fmt->color) { - case S5P_FIMC_RGB565: - case S5P_FIMC_RGB666: - case S5P_FIMC_RGB888: + case S5P_FIMC_RGB565...S5P_FIMC_RGB888: cfg |= S5P_MSCTRL_INFORMAT_RGB; break; case S5P_FIMC_YCBCR420: cfg |= S5P_MSCTRL_INFORMAT_YCBCR420; - if (frame->fmt->planes_cnt == 2) + if (frame->fmt->colplanes == 2) cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE; else cfg |= S5P_MSCTRL_C_INT_IN_3PLANE; break; - case S5P_FIMC_YCBYCR422: - case S5P_FIMC_YCRYCB422: - case S5P_FIMC_CBYCRY422: - case S5P_FIMC_CRYCBY422: - if (frame->fmt->planes_cnt == 1) { + case S5P_FIMC_YCBYCR422...S5P_FIMC_CRYCBY422: + if (frame->fmt->colplanes == 1) { cfg |= ctx->in_order_1p | S5P_MSCTRL_INFORMAT_YCBCR422_1P; } else { cfg |= S5P_MSCTRL_INFORMAT_YCBCR422; - if (frame->fmt->planes_cnt == 2) + if (frame->fmt->colplanes == 2) cfg |= ctx->in_order_2p | S5P_MSCTRL_C_INT_IN_2PLANE; else @@ -455,13 +472,6 @@ void fimc_hw_set_in_dma(struct fimc_ctx *ctx) break; } - /* - * Input DMA flip mode (and rotation). - * Do not allow simultaneous rotation and flipping. - */ - if (!ctx->rotation && ctx->out_path == FIMC_LCDFIFO) - cfg |= fimc_hw_get_in_flip(ctx->flip); - writel(cfg, dev->regs + S5P_MSCTRL); /* Input/output DMA linear/tiled mode. */ @@ -532,7 +542,7 @@ void fimc_hw_set_output_addr(struct fimc_dev *dev, } int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam) + struct s5p_fimc_isp_info *cam) { u32 cfg = readl(fimc->regs + S5P_CIGCTRL); @@ -557,41 +567,46 @@ int fimc_hw_set_camera_polarity(struct fimc_dev *fimc, } int fimc_hw_set_camera_source(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam) + struct s5p_fimc_isp_info *cam) { struct fimc_frame *f = &fimc->vid_cap.ctx->s_frame; u32 cfg = 0; + u32 bus_width; + int i; + + static const struct { + u32 pixelcode; + u32 cisrcfmt; + u16 bus_width; + } pix_desc[] = { + { V4L2_MBUS_FMT_YUYV8_2X8, S5P_CISRCFMT_ORDER422_YCBYCR, 8 }, + { V4L2_MBUS_FMT_YVYU8_2X8, S5P_CISRCFMT_ORDER422_YCRYCB, 8 }, + { V4L2_MBUS_FMT_VYUY8_2X8, S5P_CISRCFMT_ORDER422_CRYCBY, 8 }, + { V4L2_MBUS_FMT_UYVY8_2X8, S5P_CISRCFMT_ORDER422_CBYCRY, 8 }, + /* TODO: Add pixel codes for 16-bit bus width */ + }; if (cam->bus_type == FIMC_ITU_601 || cam->bus_type == FIMC_ITU_656) { + for (i = 0; i < ARRAY_SIZE(pix_desc); i++) { + if (fimc->vid_cap.fmt.code == pix_desc[i].pixelcode) { + cfg = pix_desc[i].cisrcfmt; + bus_width = pix_desc[i].bus_width; + break; + } + } - switch (fimc->vid_cap.fmt.code) { - case V4L2_MBUS_FMT_YUYV8_2X8: - cfg = S5P_CISRCFMT_ORDER422_YCBYCR; - break; - case V4L2_MBUS_FMT_YVYU8_2X8: - cfg = S5P_CISRCFMT_ORDER422_YCRYCB; - break; - case V4L2_MBUS_FMT_VYUY8_2X8: - cfg = S5P_CISRCFMT_ORDER422_CRYCBY; - break; - case V4L2_MBUS_FMT_UYVY8_2X8: - cfg = S5P_CISRCFMT_ORDER422_CBYCRY; - break; - default: - err("camera image format not supported: %d", - fimc->vid_cap.fmt.code); + if (i == ARRAY_SIZE(pix_desc)) { + v4l2_err(&fimc->vid_cap.v4l2_dev, + "Camera color format not supported: %d\n", + fimc->vid_cap.fmt.code); return -EINVAL; } if (cam->bus_type == FIMC_ITU_601) { - if (cam->bus_width == 8) { + if (bus_width == 8) cfg |= S5P_CISRCFMT_ITU601_8BIT; - } else if (cam->bus_width == 16) { + else if (bus_width == 16) cfg |= S5P_CISRCFMT_ITU601_16BIT; - } else { - err("invalid bus width: %d", cam->bus_width); - return -EINVAL; - } } /* else defaults to ITU-R BT.656 8-bit */ } @@ -624,7 +639,7 @@ int fimc_hw_set_camera_offset(struct fimc_dev *fimc, struct fimc_frame *f) } int fimc_hw_set_camera_type(struct fimc_dev *fimc, - struct s3c_fimc_isp_info *cam) + struct s5p_fimc_isp_info *cam) { u32 cfg, tmp; struct fimc_vid_cap *vid_cap = &fimc->vid_cap; @@ -650,10 +665,12 @@ int fimc_hw_set_camera_type(struct fimc_dev *fimc, vid_cap->fmt.code); return -EINVAL; } - writel(tmp | (0x1 << 8), fimc->regs + S5P_CSIIMGFMT); + tmp |= (cam->csi_data_align == 32) << 8; + + writel(tmp, fimc->regs + S5P_CSIIMGFMT); } else if (cam->bus_type == FIMC_ITU_601 || - cam->bus_type == FIMC_ITU_656) { + cam->bus_type == FIMC_ITU_656) { if (cam->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */ cfg |= S5P_CIGCTRL_SELCAM_ITU_A; } else if (cam->bus_type == FIMC_LCD_WB) { diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h b/drivers/media/video/s5p-fimc/regs-fimc.h index 57e33f84fcfa..0fea3e635d76 100644 --- a/drivers/media/video/s5p-fimc/regs-fimc.h +++ b/drivers/media/video/s5p-fimc/regs-fimc.h @@ -98,8 +98,8 @@ #define S5P_CIOCTRL 0x4c #define S5P_CIOCTRL_ORDER422_MASK (3 << 0) #define S5P_CIOCTRL_ORDER422_CRYCBY (0 << 0) -#define S5P_CIOCTRL_ORDER422_YCRYCB (1 << 0) -#define S5P_CIOCTRL_ORDER422_CBYCRY (2 << 0) +#define S5P_CIOCTRL_ORDER422_CBYCRY (1 << 0) +#define S5P_CIOCTRL_ORDER422_YCRYCB (2 << 0) #define S5P_CIOCTRL_ORDER422_YCBYCR (3 << 0) #define S5P_CIOCTRL_LASTIRQ_ENABLE (1 << 2) #define S5P_CIOCTRL_YCBCR_3PLANE (0 << 3) @@ -139,8 +139,12 @@ #define S5P_CISCCTRL_OUTRGB_FMT_MASK (3 << 11) #define S5P_CISCCTRL_RGB_EXT (1 << 10) #define S5P_CISCCTRL_ONE2ONE (1 << 9) -#define S5P_CISCCTRL_SC_HORRATIO(x) ((x) << 16) -#define S5P_CISCCTRL_SC_VERRATIO(x) ((x) << 0) +#define S5P_CISCCTRL_MHRATIO(x) ((x) << 16) +#define S5P_CISCCTRL_MVRATIO(x) ((x) << 0) +#define S5P_CISCCTRL_MHRATIO_MASK (0x1ff << 16) +#define S5P_CISCCTRL_MVRATIO_MASK (0x1ff << 0) +#define S5P_CISCCTRL_MHRATIO_EXT(x) (((x) >> 6) << 16) +#define S5P_CISCCTRL_MVRATIO_EXT(x) (((x) >> 6) << 0) /* Target area */ #define S5P_CITAREA 0x5c @@ -210,7 +214,7 @@ /* Input DMA control */ #define S5P_MSCTRL 0xfc -#define S5P_MSCTRL_IN_BURST_COUNT_MASK (3 << 24) +#define S5P_MSCTRL_IN_BURST_COUNT_MASK (0xF << 24) #define S5P_MSCTRL_2P_IN_ORDER_MASK (3 << 16) #define S5P_MSCTRL_2P_IN_ORDER_SHIFT 16 #define S5P_MSCTRL_C_INT_IN_3PLANE (0 << 15) @@ -222,11 +226,12 @@ #define S5P_MSCTRL_FLIP_X_MIRROR (1 << 13) #define S5P_MSCTRL_FLIP_Y_MIRROR (2 << 13) #define S5P_MSCTRL_FLIP_180 (3 << 13) +#define S5P_MSCTRL_FIFO_CTRL_FULL (1 << 12) #define S5P_MSCTRL_ORDER422_SHIFT 4 -#define S5P_MSCTRL_ORDER422_CRYCBY (0 << 4) -#define S5P_MSCTRL_ORDER422_YCRYCB (1 << 4) -#define S5P_MSCTRL_ORDER422_CBYCRY (2 << 4) -#define S5P_MSCTRL_ORDER422_YCBYCR (3 << 4) +#define S5P_MSCTRL_ORDER422_YCBYCR (0 << 4) +#define S5P_MSCTRL_ORDER422_CBYCRY (1 << 4) +#define S5P_MSCTRL_ORDER422_YCRYCB (2 << 4) +#define S5P_MSCTRL_ORDER422_CRYCBY (3 << 4) #define S5P_MSCTRL_ORDER422_MASK (3 << 4) #define S5P_MSCTRL_INPUT_EXTCAM (0 << 3) #define S5P_MSCTRL_INPUT_MEMORY (1 << 3) @@ -237,7 +242,7 @@ #define S5P_MSCTRL_INFORMAT_RGB (3 << 1) #define S5P_MSCTRL_INFORMAT_MASK (3 << 1) #define S5P_MSCTRL_ENVID (1 << 0) -#define S5P_MSCTRL_FRAME_COUNT(x) ((x) << 24) +#define S5P_MSCTRL_IN_BURST_COUNT(x) ((x) << 24) /* Output DMA Y/Cb/Cr offset */ #define S5P_CIOYOFF 0x168 @@ -263,6 +268,10 @@ /* Real output DMA image size (extension register) */ #define S5P_CIEXTEN 0x188 +#define S5P_CIEXTEN_MHRATIO_EXT(x) (((x) & 0x3f) << 10) +#define S5P_CIEXTEN_MVRATIO_EXT(x) ((x) & 0x3f) +#define S5P_CIEXTEN_MHRATIO_EXT_MASK (0x3f << 10) +#define S5P_CIEXTEN_MVRATIO_EXT_MASK 0x3f #define S5P_CIDMAPARAM 0x18c #define S5P_CIDMAPARAM_R_LINEAR (0 << 29) diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 7913f93979b8..99664205ef4e 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -36,6 +36,7 @@ #include <linux/videodev2.h> #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> MODULE_DESCRIPTION("Philips SAA7110 video decoder driver"); MODULE_AUTHOR("Pauline Middelink"); @@ -53,15 +54,12 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct saa7110 { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; u8 reg[SAA7110_NR_REG]; v4l2_std_id norm; int input; int enable; - int bright; - int contrast; - int hue; - int sat; wait_queue_head_t wq; }; @@ -71,6 +69,11 @@ static inline struct saa7110 *to_saa7110(struct v4l2_subdev *sd) return container_of(sd, struct saa7110, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct saa7110, hdl)->sd; +} + /* ----------------------------------------------------------------------- */ /* I2C support functions */ /* ----------------------------------------------------------------------- */ @@ -326,73 +329,22 @@ static int saa7110_s_stream(struct v4l2_subdev *sd, int enable) return 0; } -static int saa7110_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); - case V4L2_CID_CONTRAST: - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - default: - return -EINVAL; - } - return 0; -} - -static int saa7110_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct saa7110 *decoder = to_saa7110(sd); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = decoder->bright; - break; - case V4L2_CID_CONTRAST: - ctrl->value = decoder->contrast; - break; - case V4L2_CID_SATURATION: - ctrl->value = decoder->sat; - break; - case V4L2_CID_HUE: - ctrl->value = decoder->hue; - break; - default: - return -EINVAL; - } - return 0; -} - -static int saa7110_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int saa7110_s_ctrl(struct v4l2_ctrl *ctrl) { - struct saa7110 *decoder = to_saa7110(sd); + struct v4l2_subdev *sd = to_sd(ctrl); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - if (decoder->bright != ctrl->value) { - decoder->bright = ctrl->value; - saa7110_write(sd, 0x19, decoder->bright); - } + saa7110_write(sd, 0x19, ctrl->val); break; case V4L2_CID_CONTRAST: - if (decoder->contrast != ctrl->value) { - decoder->contrast = ctrl->value; - saa7110_write(sd, 0x13, decoder->contrast); - } + saa7110_write(sd, 0x13, ctrl->val); break; case V4L2_CID_SATURATION: - if (decoder->sat != ctrl->value) { - decoder->sat = ctrl->value; - saa7110_write(sd, 0x12, decoder->sat); - } + saa7110_write(sd, 0x12, ctrl->val); break; case V4L2_CID_HUE: - if (decoder->hue != ctrl->value) { - decoder->hue = ctrl->value; - saa7110_write(sd, 0x07, decoder->hue); - } + saa7110_write(sd, 0x07, ctrl->val); break; default: return -EINVAL; @@ -409,11 +361,19 @@ static int saa7110_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ide /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops saa7110_ctrl_ops = { + .s_ctrl = saa7110_s_ctrl, +}; + static const struct v4l2_subdev_core_ops saa7110_core_ops = { .g_chip_ident = saa7110_g_chip_ident, - .g_ctrl = saa7110_g_ctrl, - .s_ctrl = saa7110_s_ctrl, - .queryctrl = saa7110_queryctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = saa7110_s_std, }; @@ -454,10 +414,25 @@ static int saa7110_probe(struct i2c_client *client, decoder->norm = V4L2_STD_PAL; decoder->input = 0; decoder->enable = 1; - decoder->bright = 32768; - decoder->contrast = 32768; - decoder->hue = 32768; - decoder->sat = 32768; + v4l2_ctrl_handler_init(&decoder->hdl, 2); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_CONTRAST, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_SATURATION, 0, 127, 1, 64); + v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + init_waitqueue_head(&decoder->wq); rv = saa7110_write_block(sd, initseq, sizeof(initseq)); @@ -490,9 +465,11 @@ static int saa7110_probe(struct i2c_client *client, static int saa7110_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct saa7110 *decoder = to_saa7110(sd); v4l2_device_unregister_subdev(sd); - kfree(to_saa7110(sd)); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); return 0; } diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index 380f1b28cfcc..39fc0187a747 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -28,6 +28,7 @@ config VIDEO_SAA7134_RC bool "Philips SAA7134 Remote Controller support" depends on RC_CORE depends on VIDEO_SAA7134 + depends on !(RC_CORE=m && VIDEO_SAA7134=y) default y ---help--- Enables Remote Controller support on saa7134 driver. diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index deb8fcf4aa49..61c6007c8ea6 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3620,6 +3620,38 @@ struct saa7134_board saa7134_boards[] = { .amux = 0, }, }, + [SAA7134_BOARD_ENCORE_ENLTV_FM3] = { + .name = "Encore ENLTV-FM 3", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_TENA_TNF_5337, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0x61, + .radio_addr = 0x60, + .inputs = { { + .name = name_tv, + .vmux = 1, + .amux = LINE2, + .tv = 1, + }, { + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + .radio = { + .name = name_radio, + .vmux = 1, + .amux = LINE1, + }, + .mute = { + .name = name_mute, + .amux = LINE1, + .gpio = 0x43000, + }, + }, [SAA7134_BOARD_CINERGY_HT_PCI] = { .name = "Terratec Cinergy HT PCI", .audio_clock = 0x00187de7, @@ -6387,6 +6419,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM53, }, { .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1a7f, + .subdevice = 0x2108, + .driver_data = SAA7134_BOARD_ENCORE_ENLTV_FM3, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x153b, .subdevice = 0x1175, @@ -7102,6 +7140,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: case SAA7134_BOARD_ENCORE_ENLTV_FM53: + case SAA7134_BOARD_ENCORE_ENLTV_FM3: case SAA7134_BOARD_10MOONSTVMASTER3: case SAA7134_BOARD_BEHOLD_401: case SAA7134_BOARD_BEHOLD_403: @@ -7294,9 +7333,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) static void saa7134_tuner_setup(struct saa7134_dev *dev) { struct tuner_setup tun_setup; - unsigned int mode_mask = T_RADIO | - T_ANALOG_TV | - T_DIGITAL_TV; + unsigned int mode_mask = T_RADIO | T_ANALOG_TV; memset(&tun_setup, 0, sizeof(tun_setup)); tun_setup.tuner_callback = saa7134_tuner_callback; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 6abeecff6da7..41f836fc93ec 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -752,19 +752,28 @@ static int saa7134_hwfini(struct saa7134_dev *dev) return 0; } -static void __devinit must_configure_manually(void) +static void __devinit must_configure_manually(int has_eeprom) { unsigned int i,p; - printk(KERN_WARNING - "saa7134: <rant>\n" - "saa7134: Congratulations! Your TV card vendor saved a few\n" - "saa7134: cents for a eeprom, thus your pci board has no\n" - "saa7134: subsystem ID and I can't identify it automatically\n" - "saa7134: </rant>\n" - "saa7134: I feel better now. Ok, here are the good news:\n" - "saa7134: You can use the card=<nr> insmod option to specify\n" - "saa7134: which board do you have. The list:\n"); + if (!has_eeprom) + printk(KERN_WARNING + "saa7134: <rant>\n" + "saa7134: Congratulations! Your TV card vendor saved a few\n" + "saa7134: cents for a eeprom, thus your pci board has no\n" + "saa7134: subsystem ID and I can't identify it automatically\n" + "saa7134: </rant>\n" + "saa7134: I feel better now. Ok, here are the good news:\n" + "saa7134: You can use the card=<nr> insmod option to specify\n" + "saa7134: which board do you have. The list:\n"); + else + printk(KERN_WARNING + "saa7134: Board is currently unknown. You might try to use the card=<nr>\n" + "saa7134: insmod option to specify which board do you have, but this is\n" + "saa7134: somewhat risky, as might damage your card. It is better to ask\n" + "saa7134: for support at linux-media@vger.kernel.org.\n" + "saa7134: The supported cards are:\n"); + for (i = 0; i < saa7134_bcount; i++) { printk(KERN_WARNING "saa7134: card=%d -> %-40.40s", i,saa7134_boards[i].name); @@ -936,8 +945,10 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (card[dev->nr] >= 0 && card[dev->nr] < saa7134_bcount) dev->board = card[dev->nr]; - if (SAA7134_BOARD_NOAUTO == dev->board) { - must_configure_manually(); + if (SAA7134_BOARD_UNKNOWN == dev->board) + must_configure_manually(0); + else if (SAA7134_BOARD_NOAUTO == dev->board) { + must_configure_manually(1); dev->board = SAA7134_BOARD_UNKNOWN; } dev->autodetected = card[dev->nr] != dev->board; diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 6b8459c7728e..18294db38a01 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -373,6 +373,10 @@ static int empress_queryctrl(struct file *file, void *priv, static const u32 mpeg_ctrls[] = { V4L2_CID_MPEG_CLASS, V4L2_CID_MPEG_STREAM_TYPE, + V4L2_CID_MPEG_STREAM_PID_PMT, + V4L2_CID_MPEG_STREAM_PID_AUDIO, + V4L2_CID_MPEG_STREAM_PID_VIDEO, + V4L2_CID_MPEG_STREAM_PID_PCR, V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ, V4L2_CID_MPEG_AUDIO_ENCODING, V4L2_CID_MPEG_AUDIO_L2_BITRATE, diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index dc646e65edb7..be1c2a2de27c 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -414,6 +414,41 @@ static int __saa7134_ir_start(void *priv) if (ir->running) return 0; + /* Moved here from saa7134_input_init1() because the latter + * is not called on device resume */ + switch (dev->board) { + case SAA7134_BOARD_MD2819: + case SAA7134_BOARD_KWORLD_VSTREAM_XPERT: + case SAA7134_BOARD_AVERMEDIA_305: + case SAA7134_BOARD_AVERMEDIA_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_305: + case SAA7134_BOARD_AVERMEDIA_STUDIO_505: + case SAA7134_BOARD_AVERMEDIA_STUDIO_307: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507: + case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_M102: + case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE0, 0x4); + saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); + break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; + case SAA7134_BOARD_GOTVIEW_7135: + saa_setb(SAA7134_GPIO_GPMODE1, 0x80); + break; + } + ir->running = true; ir->active = false; @@ -548,9 +583,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keycode = 0x0007C8; mask_keydown = 0x000010; polling = 50; // ms - /* Set GPIO pin2 to high to enable the IR controller */ - saa_setb(SAA7134_GPIO_GPMODE0, 0x4); - saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); + /* GPIO stuff moved to __saa7134_ir_start() */ break; case SAA7134_BOARD_AVERMEDIA_M135A: ir_codes = RC_MAP_AVERMEDIA_M135A; @@ -572,18 +605,14 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keycode = 0x02F200; mask_keydown = 0x000400; polling = 50; // ms - /* Without this we won't receive key up events */ - saa_setb(SAA7134_GPIO_GPMODE1, 0x1); - saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + /* GPIO stuff moved to __saa7134_ir_start() */ break; case SAA7134_BOARD_AVERMEDIA_A16D: ir_codes = RC_MAP_AVERMEDIA_A16D; mask_keycode = 0x02F200; mask_keydown = 0x000400; polling = 50; /* ms */ - /* Without this we won't receive key up events */ - saa_setb(SAA7134_GPIO_GPMODE1, 0x1); - saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + /* GPIO stuff moved to __saa7134_ir_start() */ break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = RC_MAP_PIXELVIEW; @@ -635,7 +664,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keycode = 0x0003CC; mask_keydown = 0x000010; polling = 5; /* ms */ - saa_setb(SAA7134_GPIO_GPMODE1, 0x80); + /* GPIO stuff moved to __saa7134_ir_start() */ break; case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: @@ -681,6 +710,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) polling = 50; // ms break; case SAA7134_BOARD_ENCORE_ENLTV_FM53: + case SAA7134_BOARD_ENCORE_ENLTV_FM3: ir_codes = RC_MAP_ENCORE_ENLTV_FM53; mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ mask_keyup = 0x0040000; @@ -863,7 +893,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev) case SAA7134_BOARD_HAUPPAUGE_HVR1110: dev->init_data.name = "HVR 1110"; dev->init_data.get_key = get_key_hvr1110; - dev->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW; + dev->init_data.ir_codes = RC_MAP_HAUPPAUGE; info.addr = 0x71; break; case SAA7134_BOARD_BEHOLD_607FM_MK3: diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 5b0a347b0b8f..f96cd5d761f9 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -327,6 +327,7 @@ struct saa7134_card_ir { #define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181 #define SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG 182 #define SAA7134_BOARD_VIDEOMATE_M1F 183 +#define SAA7134_BOARD_ENCORE_ENLTV_FM3 184 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c index bd86d970f4c2..8a98ab68239e 100644 --- a/drivers/media/video/saa7164/saa7164-api.c +++ b/drivers/media/video/saa7164/saa7164-api.c @@ -743,7 +743,7 @@ int saa7164_api_configure_dif(struct saa7164_port *port, u32 std) int saa7164_api_initialize_dif(struct saa7164_port *port) { struct saa7164_dev *dev = port->dev; - struct saa7164_port *p = 0; + struct saa7164_port *p = NULL; int ret = -EINVAL; u32 std = 0; @@ -926,9 +926,9 @@ int saa7164_api_configure_port_mpeg2ps(struct saa7164_dev *dev, int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) { - struct saa7164_port *tsport = 0; - struct saa7164_port *encport = 0; - struct saa7164_port *vbiport = 0; + struct saa7164_port *tsport = NULL; + struct saa7164_port *encport = NULL; + struct saa7164_port *vbiport = NULL; u32 idx, next_offset; int i; struct tmComResDescrHeader *hdr, *t; @@ -1340,7 +1340,7 @@ int saa7164_api_enum_subdevs(struct saa7164_dev *dev) /* Allocate enough storage for all of the descs */ buf = kzalloc(buflen, GFP_KERNEL); - if (buf == NULL) + if (!buf) return SAA_ERR_NO_RESOURCES; /* Retrieve them */ diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c index ddd25211c9e8..66696fa8341d 100644 --- a/drivers/media/video/saa7164/saa7164-buffer.c +++ b/drivers/media/video/saa7164/saa7164-buffer.c @@ -93,7 +93,7 @@ struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_port *port, u32 len) { struct tmHWStreamParameters *params = &port->hw_streamingparams; - struct saa7164_buffer *buf = 0; + struct saa7164_buffer *buf = NULL; struct saa7164_dev *dev = port->dev; int i; @@ -103,7 +103,7 @@ struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_port *port, } buf = kzalloc(sizeof(struct saa7164_buffer), GFP_KERNEL); - if (buf == NULL) { + if (!buf) { log_warn("%s() SAA_ERR_NO_RESOURCES\n", __func__); goto ret; } @@ -157,7 +157,7 @@ fail2: fail1: kfree(buf); - buf = 0; + buf = NULL; ret: return buf; } @@ -289,14 +289,14 @@ struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev, struct saa7164_user_buffer *buf; buf = kzalloc(sizeof(struct saa7164_user_buffer), GFP_KERNEL); - if (buf == 0) - return 0; + if (!buf) + return NULL; buf->data = kzalloc(len, GFP_KERNEL); - if (buf->data == 0) { + if (!buf->data) { kfree(buf); - return 0; + return NULL; } buf->actual_size = len; @@ -315,7 +315,7 @@ void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf) return; kfree(buf->data); - buf->data = 0; + buf->data = NULL; kfree(buf); } diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c index b2b0d97101d0..466e1b02f91f 100644 --- a/drivers/media/video/saa7164/saa7164-bus.c +++ b/drivers/media/video/saa7164/saa7164-bus.c @@ -158,7 +158,7 @@ int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, return SAA_ERR_BAD_PARAMETER; } - if ((msg->size > 0) && (buf == 0)) { + if ((msg->size > 0) && (buf == NULL)) { printk(KERN_ERR "%s() Missing message buffer\n", __func__); return SAA_ERR_BAD_PARAMETER; } @@ -315,7 +315,7 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, saa7164_bus_verify(dev); - if (msg == 0) + if (msg == NULL) return ret; if (msg->size > dev->bus.m_wMaxReqSize) { @@ -324,7 +324,7 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, return ret; } - if ((peekonly == 0) && (msg->size > 0) && (buf == 0)) { + if ((peekonly == 0) && (msg->size > 0) && (buf == NULL)) { printk(KERN_ERR "%s() Missing msg buf, size should be %d bytes\n", __func__, msg->size); @@ -392,7 +392,7 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__); saa7164_bus_dumpmsg(dev, msg, buf); - saa7164_bus_dumpmsg(dev, &msg_tmp, 0); + saa7164_bus_dumpmsg(dev, &msg_tmp, NULL); ret = SAA_ERR_INVALID_COMMAND; goto out; } diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index a97ae17b36c2..6a4c217ed3a7 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -84,7 +84,7 @@ int saa7164_irq_dequeue(struct saa7164_dev *dev) { int ret = SAA_OK, i = 0; u32 timeout; - wait_queue_head_t *q = 0; + wait_queue_head_t *q = NULL; u8 tmp[512]; dprintk(DBGLVL_CMD, "%s()\n", __func__); @@ -137,7 +137,7 @@ int saa7164_cmd_dequeue(struct saa7164_dev *dev) int loop = 1; int ret; u32 timeout; - wait_queue_head_t *q = 0; + wait_queue_head_t *q = NULL; u8 tmp[512]; dprintk(DBGLVL_CMD, "%s()\n", __func__); @@ -261,7 +261,7 @@ out: */ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) { - wait_queue_head_t *q = 0; + wait_queue_head_t *q = NULL; int ret = SAA_BUS_TIMEOUT; unsigned long stamp; int r; @@ -357,7 +357,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id, command, controlselector); - if ((size == 0) || (buf == 0)) { + if ((size == 0) || (buf == NULL)) { printk(KERN_ERR "%s() Invalid param\n", __func__); return SAA_ERR_BAD_PARAMETER; } @@ -538,7 +538,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, /* Invalid */ dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__); - ret = saa7164_bus_get(dev, presponse_t, 0, 0); + ret = saa7164_bus_get(dev, presponse_t, NULL, 0); if (ret != SAA_OK) { printk(KERN_ERR "get failed\n"); return ret; diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c index 58af67f2278b..b813aec1e456 100644 --- a/drivers/media/video/saa7164/saa7164-core.c +++ b/drivers/media/video/saa7164/saa7164-core.c @@ -277,8 +277,8 @@ static void saa7164_histogram_print(struct saa7164_port *port, static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr) { struct saa7164_dev *dev = port->dev; - struct saa7164_buffer *buf = 0; - struct saa7164_user_buffer *ubuf = 0; + struct saa7164_buffer *buf = NULL; + struct saa7164_user_buffer *ubuf = NULL; struct list_head *c, *n; int i = 0; u8 __iomem *p; @@ -649,7 +649,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id) u32 intid, intstat[INT_SIZE/4]; int i, handled = 0, bit; - if (dev == 0) { + if (dev == NULL) { printk(KERN_ERR "%s() No device specified\n", __func__); handled = 0; goto out; @@ -945,7 +945,7 @@ static int get_resources(struct saa7164_dev *dev) static int saa7164_port_init(struct saa7164_dev *dev, int portnr) { - struct saa7164_port *port = 0; + struct saa7164_port *port = NULL; if ((portnr < 0) || (portnr >= SAA7164_MAX_PORTS)) BUG(); diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c index b305a01b3bde..f65eab63ca87 100644 --- a/drivers/media/video/saa7164/saa7164-dvb.c +++ b/drivers/media/video/saa7164/saa7164-dvb.c @@ -309,8 +309,8 @@ static int dvb_register(struct saa7164_port *port) port->hw_streamingparams.pitch = 188; port->hw_streamingparams.linethreshold = 0; - port->hw_streamingparams.pagetablelistvirt = 0; - port->hw_streamingparams.pagetablelistphys = 0; + port->hw_streamingparams.pagetablelistvirt = NULL; + port->hw_streamingparams.pagetablelistphys = NULL; port->hw_streamingparams.numpagetables = 2 + ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index 1838408cd5cb..f9d594698832 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -152,8 +152,8 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) /* Init and establish defaults */ params->bitspersample = 8; params->linethreshold = 0; - params->pagetablelistvirt = 0; - params->pagetablelistphys = 0; + params->pagetablelistvirt = NULL; + params->pagetablelistphys = NULL; params->numpagetableentries = port->hwcfg.buffercount; /* Allocate the PCI resources, buffers (hard) */ @@ -1108,7 +1108,7 @@ static int fops_release(struct file *file) struct saa7164_user_buffer *saa7164_enc_next_buf(struct saa7164_port *port) { - struct saa7164_user_buffer *ubuf = 0; + struct saa7164_user_buffer *ubuf = NULL; struct saa7164_dev *dev = port->dev; u32 crc; @@ -1443,7 +1443,7 @@ int saa7164_encoder_register(struct saa7164_port *port) port->v4l_device = saa7164_encoder_alloc(port, dev->pci, &saa7164_mpeg_template, "mpeg"); - if (port->v4l_device == NULL) { + if (!port->v4l_device) { printk(KERN_INFO "%s: can't allocate mpeg device\n", dev->name); result = -ENOMEM; diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c index ebed6f786a23..b369300cce06 100644 --- a/drivers/media/video/saa7164/saa7164-fw.c +++ b/drivers/media/video/saa7164/saa7164-fw.c @@ -88,7 +88,7 @@ int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize, "%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n", __func__, src, srcsize, dlflags, dst, dstsize); - if ((src == 0) || (dst == 0)) { + if ((src == NULL) || (dst == NULL)) { ret = -EIO; goto out; } diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index 8abbe6d661e4..9e5b01c29cf5 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -123,8 +123,8 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) ((params->numberoflines * params->pitch) / PAGE_SIZE); params->bitspersample = 8; params->linethreshold = 0; - params->pagetablelistvirt = 0; - params->pagetablelistphys = 0; + params->pagetablelistvirt = NULL; + params->pagetablelistphys = NULL; params->numpagetableentries = port->hwcfg.buffercount; /* Allocate the PCI resources, buffers (hard) */ @@ -1054,7 +1054,7 @@ static int fops_release(struct file *file) struct saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port) { - struct saa7164_user_buffer *ubuf = 0; + struct saa7164_user_buffer *ubuf = NULL; struct saa7164_dev *dev = port->dev; u32 crc; @@ -1334,7 +1334,7 @@ int saa7164_vbi_register(struct saa7164_port *port) port->v4l_device = saa7164_vbi_alloc(port, dev->pci, &saa7164_vbi_template, "vbi"); - if (port->v4l_device == NULL) { + if (!port->v4l_device) { printk(KERN_INFO "%s: can't allocate vbi device\n", dev->name); result = -ENOMEM; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 954222bc3458..3fe54bf41142 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -38,7 +38,7 @@ #include <media/v4l2-dev.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> -#include <media/videobuf-dma-contig.h> +#include <media/videobuf2-dma-contig.h> #include <media/v4l2-mediabus.h> #include <media/soc_mediabus.h> @@ -87,7 +87,8 @@ /* per video frame buffer */ struct sh_mobile_ceu_buffer { - struct videobuf_buffer vb; /* v4l buffer must be first */ + struct vb2_buffer vb; /* v4l buffer must be first */ + struct list_head queue; enum v4l2_mbus_pixelcode code; }; @@ -99,16 +100,17 @@ struct sh_mobile_ceu_dev { void __iomem *base; unsigned long video_limit; - /* lock used to protect videobuf */ - spinlock_t lock; + spinlock_t lock; /* Protects video buffer lists */ struct list_head capture; - struct videobuf_buffer *active; + struct vb2_buffer *active; + struct vb2_alloc_ctx *alloc_ctx; struct sh_mobile_ceu_info *pdata; u32 cflcr; enum v4l2_field field; + int sequence; unsigned int image_mode:1; unsigned int is_16bit:1; @@ -133,6 +135,11 @@ struct sh_mobile_ceu_cam { enum v4l2_mbus_pixelcode code; }; +static struct sh_mobile_ceu_buffer *to_ceu_vb(struct vb2_buffer *vb) +{ + return container_of(vb, struct sh_mobile_ceu_buffer, vb); +} + static unsigned long make_bus_param(struct sh_mobile_ceu_dev *pcdev) { unsigned long flags; @@ -205,11 +212,11 @@ static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev) /* * Videobuf operations */ -static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq, - unsigned int *count, - unsigned int *size) +static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq, + unsigned int *count, unsigned int *num_planes, + unsigned long sizes[], void *alloc_ctxs[]) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, @@ -218,39 +225,25 @@ static int sh_mobile_ceu_videobuf_setup(struct videobuf_queue *vq, if (bytes_per_line < 0) return bytes_per_line; - *size = bytes_per_line * icd->user_height; + *num_planes = 1; + + pcdev->sequence = 0; + sizes[0] = bytes_per_line * icd->user_height; + alloc_ctxs[0] = pcdev->alloc_ctx; - if (0 == *count) + if (!*count) *count = 2; if (pcdev->video_limit) { - if (PAGE_ALIGN(*size) * *count > pcdev->video_limit) - *count = pcdev->video_limit / PAGE_ALIGN(*size); + if (PAGE_ALIGN(sizes[0]) * *count > pcdev->video_limit) + *count = pcdev->video_limit / PAGE_ALIGN(sizes[0]); } - dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->dev.parent, "count=%d, size=%lu\n", *count, sizes[0]); return 0; } -static void free_buffer(struct videobuf_queue *vq, - struct sh_mobile_ceu_buffer *buf) -{ - struct soc_camera_device *icd = vq->priv_data; - struct device *dev = icd->dev.parent; - - dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, - &buf->vb, buf->vb.baddr, buf->vb.bsize); - - if (in_interrupt()) - BUG(); - - videobuf_waiton(vq, &buf->vb, 0, 0); - videobuf_dma_contig_free(vq, &buf->vb); - dev_dbg(dev, "%s freed\n", __func__); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - #define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */ #define CEU_CETCR_IGRW (1 << 4) /* prohibited register access interrupt bit */ #define CEU_CEIER_CPEIE (1 << 0) /* one-frame capture end interrupt */ @@ -309,7 +302,8 @@ static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) bottom2 = CDBCR; } - phys_addr_top = videobuf_to_dma_contig(pcdev->active); + phys_addr_top = vb2_dma_contig_plane_paddr(pcdev->active, 0); + ceu_write(pcdev, top1, phys_addr_top); if (V4L2_FIELD_NONE != pcdev->field) { phys_addr_bottom = phys_addr_top + icd->user_width; @@ -330,87 +324,67 @@ static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) } } - pcdev->active->state = VIDEOBUF_ACTIVE; ceu_write(pcdev, CAPSR, 0x1); /* start capture */ return ret; } -static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq, - struct videobuf_buffer *vb, - enum v4l2_field field) +static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq); struct sh_mobile_ceu_buffer *buf; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - int ret; + unsigned long size; if (bytes_per_line < 0) return bytes_per_line; - buf = container_of(vb, struct sh_mobile_ceu_buffer, vb); + buf = to_ceu_vb(vb); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); /* Added list head initialization on alloc */ - WARN_ON(!list_empty(&vb->queue)); + WARN(!list_empty(&buf->queue), "Buffer %p on queue!\n", vb); #ifdef DEBUG /* * This can be useful if you want to see if we actually fill * the buffer with something */ - memset((void *)vb->baddr, 0xaa, vb->bsize); + if (vb2_plane_vaddr(vb, 0)) + memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0)); #endif BUG_ON(NULL == icd->current_fmt); - if (buf->code != icd->current_fmt->code || - vb->width != icd->user_width || - vb->height != icd->user_height || - vb->field != field) { - buf->code = icd->current_fmt->code; - vb->width = icd->user_width; - vb->height = icd->user_height; - vb->field = field; - vb->state = VIDEOBUF_NEEDS_INIT; - } + size = icd->user_height * bytes_per_line; - vb->size = vb->height * bytes_per_line; - if (0 != vb->baddr && vb->bsize < vb->size) { - ret = -EINVAL; - goto out; + if (vb2_plane_size(vb, 0) < size) { + dev_err(icd->dev.parent, "Buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -ENOBUFS; } - if (vb->state == VIDEOBUF_NEEDS_INIT) { - ret = videobuf_iolock(vq, vb, NULL); - if (ret) - goto fail; - vb->state = VIDEOBUF_PREPARED; - } + vb2_set_plane_payload(vb, 0, size); return 0; -fail: - free_buffer(vq, buf); -out: - return ret; } -/* Called under spinlock_irqsave(&pcdev->lock, ...) */ -static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; + struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb); + unsigned long flags; - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, - vb, vb->baddr, vb->bsize); + dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); - vb->state = VIDEOBUF_QUEUED; - list_add_tail(&vb->queue, &pcdev->capture); + spin_lock_irqsave(&pcdev->lock, flags); + list_add_tail(&buf->queue, &pcdev->capture); if (!pcdev->active) { /* @@ -421,13 +395,14 @@ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, pcdev->active = vb; sh_mobile_ceu_capture(pcdev); } + spin_unlock_irqrestore(&pcdev->lock, flags); } -static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb) { - struct soc_camera_device *icd = vq->priv_data; + struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq); struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb); struct sh_mobile_ceu_dev *pcdev = ici->priv; unsigned long flags; @@ -439,53 +414,60 @@ static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq, pcdev->active = NULL; } - if ((vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) && - !list_empty(&vb->queue)) { - vb->state = VIDEOBUF_ERROR; - list_del_init(&vb->queue); - } + /* Doesn't hurt also if the list is empty */ + list_del_init(&buf->queue); spin_unlock_irqrestore(&pcdev->lock, flags); +} - free_buffer(vq, container_of(vb, struct sh_mobile_ceu_buffer, vb)); +static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb) +{ + /* This is for locking debugging only */ + INIT_LIST_HEAD(&to_ceu_vb(vb)->queue); + return 0; } -static struct videobuf_queue_ops sh_mobile_ceu_videobuf_ops = { - .buf_setup = sh_mobile_ceu_videobuf_setup, - .buf_prepare = sh_mobile_ceu_videobuf_prepare, - .buf_queue = sh_mobile_ceu_videobuf_queue, - .buf_release = sh_mobile_ceu_videobuf_release, +static struct vb2_ops sh_mobile_ceu_videobuf_ops = { + .queue_setup = sh_mobile_ceu_videobuf_setup, + .buf_prepare = sh_mobile_ceu_videobuf_prepare, + .buf_queue = sh_mobile_ceu_videobuf_queue, + .buf_cleanup = sh_mobile_ceu_videobuf_release, + .buf_init = sh_mobile_ceu_videobuf_init, + .wait_prepare = soc_camera_unlock, + .wait_finish = soc_camera_lock, }; static irqreturn_t sh_mobile_ceu_irq(int irq, void *data) { struct sh_mobile_ceu_dev *pcdev = data; - struct videobuf_buffer *vb; - unsigned long flags; + struct vb2_buffer *vb; + int ret; - spin_lock_irqsave(&pcdev->lock, flags); + spin_lock(&pcdev->lock); vb = pcdev->active; if (!vb) /* Stale interrupt from a released buffer */ goto out; - list_del_init(&vb->queue); + list_del_init(&to_ceu_vb(vb)->queue); if (!list_empty(&pcdev->capture)) - pcdev->active = list_entry(pcdev->capture.next, - struct videobuf_buffer, queue); + pcdev->active = &list_entry(pcdev->capture.next, + struct sh_mobile_ceu_buffer, queue)->vb; else pcdev->active = NULL; - vb->state = (sh_mobile_ceu_capture(pcdev) < 0) ? - VIDEOBUF_ERROR : VIDEOBUF_DONE; - do_gettimeofday(&vb->ts); - vb->field_count++; - wake_up(&vb->done); + ret = sh_mobile_ceu_capture(pcdev); + do_gettimeofday(&vb->v4l2_buf.timestamp); + if (!ret) { + vb->v4l2_buf.field = pcdev->field; + vb->v4l2_buf.sequence = pcdev->sequence++; + } + vb2_buffer_done(vb, ret < 0 ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); out: - spin_unlock_irqrestore(&pcdev->lock, flags); + spin_unlock(&pcdev->lock); return IRQ_HANDLED; } @@ -529,9 +511,8 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) /* make sure active buffer is canceled */ spin_lock_irqsave(&pcdev->lock, flags); if (pcdev->active) { - list_del(&pcdev->active->queue); - pcdev->active->state = VIDEOBUF_ERROR; - wake_up_all(&pcdev->active->done); + list_del_init(&to_ceu_vb(pcdev->active)->queue); + vb2_buffer_done(pcdev->active, VB2_BUF_STATE_ERROR); pcdev->active = NULL; } spin_unlock_irqrestore(&pcdev->lock, flags); @@ -686,6 +667,7 @@ static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr) ceu_write(pcdev, CAPSR, capsr); } +/* Capture is not running, no interrupts, no locking needed */ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { @@ -1364,7 +1346,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, struct device *dev = icd->dev.parent; struct v4l2_mbus_framefmt mf; unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v, - out_width, out_height, scale_h, scale_v; + out_width, out_height; int interm_width, interm_height; u32 capsr, cflcr; int ret; @@ -1422,10 +1404,6 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, scale_ceu_h = calc_scale(interm_width, &out_width); scale_ceu_v = calc_scale(interm_height, &out_height); - /* Calculate camera scales */ - scale_h = calc_generic_scale(cam_rect->width, out_width); - scale_v = calc_generic_scale(cam_rect->height, out_height); - dev_geo(dev, "5: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v); /* Apply CEU scales. */ @@ -1437,8 +1415,8 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, icd->user_width = out_width; icd->user_height = out_height; - cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_h) & ~1; - cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_v) & ~1; + cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_cam_h) & ~1; + cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_cam_v) & ~1; /* 6. Use CEU cropping to crop to the new window. */ sh_mobile_ceu_set_rect(icd); @@ -1449,7 +1427,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top); - /* Restore capture */ + /* Restore capture. The CE bit can be cleared by the hardware */ if (pcdev->active) capsr |= 1; capture_restore(pcdev, capsr); @@ -1726,43 +1704,11 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, return ret; } -static int sh_mobile_ceu_reqbufs(struct soc_camera_device *icd, - struct v4l2_requestbuffers *p) -{ - int i; - - /* - * This is for locking debugging only. I removed spinlocks and now I - * check whether .prepare is ever called on a linked buffer, or whether - * a dma IRQ can occur for an in-work or unlinked buffer. Until now - * it hadn't triggered - */ - for (i = 0; i < p->count; i++) { - struct sh_mobile_ceu_buffer *buf; - - buf = container_of(icd->vb_vidq.bufs[i], - struct sh_mobile_ceu_buffer, vb); - INIT_LIST_HEAD(&buf->vb.queue); - } - - return 0; -} - static unsigned int sh_mobile_ceu_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; - struct sh_mobile_ceu_buffer *buf; - - buf = list_entry(icd->vb_vidq.stream.next, - struct sh_mobile_ceu_buffer, vb.stream); - - poll_wait(file, &buf->vb.done, pt); - if (buf->vb.state == VIDEOBUF_DONE || - buf->vb.state == VIDEOBUF_ERROR) - return POLLIN|POLLRDNORM; - - return 0; + return vb2_poll(&icd->vb2_vidq, file, pt); } static int sh_mobile_ceu_querycap(struct soc_camera_host *ici, @@ -1774,19 +1720,17 @@ static int sh_mobile_ceu_querycap(struct soc_camera_host *ici, return 0; } -static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q, - struct soc_camera_device *icd) +static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q, + struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - struct sh_mobile_ceu_dev *pcdev = ici->priv; - - videobuf_queue_dma_contig_init(q, - &sh_mobile_ceu_videobuf_ops, - icd->dev.parent, &pcdev->lock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - pcdev->field, - sizeof(struct sh_mobile_ceu_buffer), - icd, &icd->video_lock); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->drv_priv = icd; + q->ops = &sh_mobile_ceu_videobuf_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct sh_mobile_ceu_buffer); + + return vb2_queue_init(q); } static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd, @@ -1850,11 +1794,10 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = { .try_fmt = sh_mobile_ceu_try_fmt, .set_ctrl = sh_mobile_ceu_set_ctrl, .get_ctrl = sh_mobile_ceu_get_ctrl, - .reqbufs = sh_mobile_ceu_reqbufs, .poll = sh_mobile_ceu_poll, .querycap = sh_mobile_ceu_querycap, .set_bus_param = sh_mobile_ceu_set_bus_param, - .init_videobuf = sh_mobile_ceu_init_videobuf, + .init_videobuf2 = sh_mobile_ceu_init_videobuf, .controls = sh_mobile_ceu_controls, .num_controls = ARRAY_SIZE(sh_mobile_ceu_controls), }; @@ -2005,12 +1948,20 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) } } + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + err = PTR_ERR(pcdev->alloc_ctx); + goto exit_module_put; + } + err = soc_camera_host_register(&pcdev->ici); if (err) - goto exit_module_put; + goto exit_free_ctx; return 0; +exit_free_ctx: + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); exit_module_put: if (csi2 && csi2->driver) module_put(csi2->driver->owner); @@ -2041,6 +1992,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) dma_release_declared_memory(&pdev->dev); iounmap(pcdev->base); + vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); if (csi2 && csi2->driver) module_put(csi2->driver->owner); kfree(pcdev); diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index 84a646819318..dd1b81b1442b 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -56,7 +56,7 @@ static int sh_csi2_try_fmt(struct v4l2_subdev *sd, switch (mf->code) { case V4L2_MBUS_FMT_UYVY8_2X8: /* YUV422 */ case V4L2_MBUS_FMT_YUYV8_1_5X8: /* YUV420 */ - case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ + case V4L2_MBUS_FMT_Y8_1X8: /* RAW8 */ case V4L2_MBUS_FMT_SBGGR8_1X8: case V4L2_MBUS_FMT_SGRBG8_1X8: break; @@ -67,7 +67,7 @@ static int sh_csi2_try_fmt(struct v4l2_subdev *sd, break; case SH_CSI2I: switch (mf->code) { - case V4L2_MBUS_FMT_GREY8_1X8: /* RAW8 */ + case V4L2_MBUS_FMT_Y8_1X8: /* RAW8 */ case V4L2_MBUS_FMT_SBGGR8_1X8: case V4L2_MBUS_FMT_SGRBG8_1X8: case V4L2_MBUS_FMT_SBGGR10_1X10: /* RAW10 */ @@ -111,7 +111,7 @@ static int sh_csi2_s_fmt(struct v4l2_subdev *sd, case V4L2_MBUS_FMT_RGB565_2X8_BE: tmp |= 0x22; /* RGB565 */ break; - case V4L2_MBUS_FMT_GREY8_1X8: + case V4L2_MBUS_FMT_Y8_1X8: case V4L2_MBUS_FMT_SBGGR8_1X8: case V4L2_MBUS_FMT_SGRBG8_1X8: tmp |= 0x2a; /* RAW8 */ diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 84984f64b234..ce56a1cdbf0a 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -1430,9 +1430,9 @@ static DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR, sn9c102_show_i2c_reg, sn9c102_store_i2c_reg); static DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR, sn9c102_show_i2c_val, sn9c102_store_i2c_val); -static DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green); -static DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue); -static DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red); +static DEVICE_ATTR(green, S_IWUSR, NULL, sn9c102_store_green); +static DEVICE_ATTR(blue, S_IWUSR, NULL, sn9c102_store_blue); +static DEVICE_ATTR(red, S_IWUSR, NULL, sn9c102_store_red); static DEVICE_ATTR(frame_header, S_IRUGO, sn9c102_show_frame_header, NULL); diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index a66811b43710..46284489e4eb 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -34,6 +34,7 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-dev.h> #include <media/videobuf-core.h> +#include <media/videobuf2-core.h> #include <media/soc_mediabus.h> /* Default to VGA resolution */ @@ -143,6 +144,10 @@ static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv, WARN_ON(priv != file->private_data); + /* Only single-plane capture is supported so far */ + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + /* limit format to hardware capabilities */ return ici->ops->try_fmt(icd, f); } @@ -191,6 +196,15 @@ static int soc_camera_s_std(struct file *file, void *priv, v4l2_std_id *a) return v4l2_subdev_call(sd, core, s_std, *a); } +static int soc_camera_enum_fsizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + + return ici->ops->enum_fsizes(icd, fsize); +} + static int soc_camera_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { @@ -203,11 +217,16 @@ static int soc_camera_reqbufs(struct file *file, void *priv, if (icd->streamer && icd->streamer != file) return -EBUSY; - ret = videobuf_reqbufs(&icd->vb_vidq, p); - if (ret < 0) - return ret; + if (ici->ops->init_videobuf) { + ret = videobuf_reqbufs(&icd->vb_vidq, p); + if (ret < 0) + return ret; + + ret = ici->ops->reqbufs(icd, p); + } else { + ret = vb2_reqbufs(&icd->vb2_vidq, p); + } - ret = ici->ops->reqbufs(icd, p); if (!ret && !icd->streamer) icd->streamer = file; @@ -218,36 +237,48 @@ static int soc_camera_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); WARN_ON(priv != file->private_data); - return videobuf_querybuf(&icd->vb_vidq, p); + if (ici->ops->init_videobuf) + return videobuf_querybuf(&icd->vb_vidq, p); + else + return vb2_querybuf(&icd->vb2_vidq, p); } static int soc_camera_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); WARN_ON(priv != file->private_data); if (icd->streamer != file) return -EBUSY; - return videobuf_qbuf(&icd->vb_vidq, p); + if (ici->ops->init_videobuf) + return videobuf_qbuf(&icd->vb_vidq, p); + else + return vb2_qbuf(&icd->vb2_vidq, p); } static int soc_camera_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); WARN_ON(priv != file->private_data); if (icd->streamer != file) return -EBUSY; - return videobuf_dqbuf(&icd->vb_vidq, p, file->f_flags & O_NONBLOCK); + if (ici->ops->init_videobuf) + return videobuf_dqbuf(&icd->vb_vidq, p, file->f_flags & O_NONBLOCK); + else + return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK); } /* Always entered with .video_lock held */ @@ -362,13 +393,12 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, icd->user_width = pix->width; icd->user_height = pix->height; + icd->bytesperline = pix->bytesperline; + icd->sizeimage = pix->sizeimage; icd->colorspace = pix->colorspace; - icd->vb_vidq.field = - icd->field = pix->field; - - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - dev_warn(&icd->dev, "Attention! Wrong buf-type %d\n", - f->type); + icd->field = pix->field; + if (ici->ops->init_videobuf) + icd->vb_vidq.field = pix->field; dev_dbg(&icd->dev, "set width: %d height: %d\n", icd->user_width, icd->user_height); @@ -444,7 +474,13 @@ static int soc_camera_open(struct file *file) if (ret < 0) goto esfmt; - ici->ops->init_videobuf(&icd->vb_vidq, icd); + if (ici->ops->init_videobuf) { + ici->ops->init_videobuf(&icd->vb_vidq, icd); + } else { + ret = ici->ops->init_videobuf2(&icd->vb2_vidq, icd); + if (ret < 0) + goto einitvb; + } } file->private_data = icd; @@ -456,6 +492,7 @@ static int soc_camera_open(struct file *file) * First four errors are entered with the .video_lock held * and use_count == 1 */ +einitvb: esfmt: pm_runtime_disable(&icd->vdev->dev); eresume: @@ -482,6 +519,8 @@ static int soc_camera_close(struct file *file) pm_runtime_disable(&icd->vdev->dev); ici->ops->remove(icd); + if (ici->ops->init_videobuf2) + vb2_queue_release(&icd->vb2_vidq); soc_camera_power_set(icd, icl, 0); } @@ -510,6 +549,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf, static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) { struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); int err; dev_dbg(&icd->dev, "mmap called, vma=0x%08lx\n", (unsigned long)vma); @@ -517,7 +557,10 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) if (icd->streamer != file) return -EBUSY; - err = videobuf_mmap_mapper(&icd->vb_vidq, vma); + if (ici->ops->init_videobuf) + err = videobuf_mmap_mapper(&icd->vb_vidq, vma); + else + err = vb2_mmap(&icd->vb2_vidq, vma); dev_dbg(&icd->dev, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, @@ -535,7 +578,7 @@ static unsigned int soc_camera_poll(struct file *file, poll_table *pt) if (icd->streamer != file) return -EBUSY; - if (list_empty(&icd->vb_vidq.stream)) { + if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) { dev_err(&icd->dev, "Trying to poll with no queued buffers!\n"); return POLLERR; } @@ -543,6 +586,20 @@ static unsigned int soc_camera_poll(struct file *file, poll_table *pt) return ici->ops->poll(file, pt); } +void soc_camera_lock(struct vb2_queue *vq) +{ + struct soc_camera_device *icd = vb2_get_drv_priv(vq); + mutex_lock(&icd->video_lock); +} +EXPORT_SYMBOL(soc_camera_lock); + +void soc_camera_unlock(struct vb2_queue *vq) +{ + struct soc_camera_device *icd = vb2_get_drv_priv(vq); + mutex_unlock(&icd->video_lock); +} +EXPORT_SYMBOL(soc_camera_unlock); + static struct v4l2_file_operations soc_camera_fops = { .owner = THIS_MODULE, .open = soc_camera_open, @@ -561,6 +618,11 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv, WARN_ON(priv != file->private_data); + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dev_warn(&icd->dev, "Wrong buf-type %d\n", f->type); + return -EINVAL; + } + if (icd->streamer && icd->streamer != file) return -EBUSY; @@ -604,16 +666,16 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv, WARN_ON(priv != file->private_data); + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + pix->width = icd->user_width; pix->height = icd->user_height; - pix->field = icd->vb_vidq.field; + pix->bytesperline = icd->bytesperline; + pix->sizeimage = icd->sizeimage; + pix->field = icd->field; pix->pixelformat = icd->current_fmt->host_fmt->fourcc; - pix->bytesperline = soc_mbus_bytes_per_line(pix->width, - icd->current_fmt->host_fmt); pix->colorspace = icd->colorspace; - if (pix->bytesperline < 0) - return pix->bytesperline; - pix->sizeimage = pix->height * pix->bytesperline; dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n", icd->current_fmt->host_fmt->fourcc); return 0; @@ -635,6 +697,7 @@ static int soc_camera_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { struct soc_camera_device *icd = file->private_data; + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret; @@ -646,10 +709,14 @@ static int soc_camera_streamon(struct file *file, void *priv, if (icd->streamer != file) return -EBUSY; - v4l2_subdev_call(sd, video, s_stream, 1); - /* This calls buf_queue from host driver's videobuf_queue_ops */ - ret = videobuf_streamon(&icd->vb_vidq); + if (ici->ops->init_videobuf) + ret = videobuf_streamon(&icd->vb_vidq); + else + ret = vb2_streamon(&icd->vb2_vidq, i); + + if (!ret) + v4l2_subdev_call(sd, video, s_stream, 1); return ret; } @@ -659,6 +726,7 @@ static int soc_camera_streamoff(struct file *file, void *priv, { struct soc_camera_device *icd = file->private_data; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); WARN_ON(priv != file->private_data); @@ -672,7 +740,10 @@ static int soc_camera_streamoff(struct file *file, void *priv, * This calls buf_release from host driver's videobuf_queue_ops for all * remaining buffers. When the last buffer is freed, stop capture */ - videobuf_streamoff(&icd->vb_vidq); + if (ici->ops->init_videobuf) + videobuf_streamoff(&icd->vb_vidq); + else + vb2_streamoff(&icd->vb2_vidq, i); v4l2_subdev_call(sd, video, s_stream, 0); @@ -1175,6 +1246,31 @@ static int default_s_parm(struct soc_camera_device *icd, return v4l2_subdev_call(sd, video, s_parm, parm); } +static int default_enum_fsizes(struct soc_camera_device *icd, + struct v4l2_frmsizeenum *fsize) +{ + int ret; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + const struct soc_camera_format_xlate *xlate; + __u32 pixfmt = fsize->pixel_format; + struct v4l2_frmsizeenum fsize_mbus = *fsize; + + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (!xlate) + return -EINVAL; + /* map xlate-code to pixel_format, sensor only handle xlate-code*/ + fsize_mbus.pixel_format = xlate->code; + + ret = v4l2_subdev_call(sd, video, enum_mbus_fsizes, &fsize_mbus); + if (ret < 0) + return ret; + + *fsize = fsize_mbus; + fsize->pixel_format = pixfmt; + + return 0; +} + static void soc_camera_device_init(struct device *dev, void *pdata) { dev->platform_data = pdata; @@ -1192,8 +1288,9 @@ int soc_camera_host_register(struct soc_camera_host *ici) !ici->ops->set_fmt || !ici->ops->set_bus_param || !ici->ops->querycap || - !ici->ops->init_videobuf || - !ici->ops->reqbufs || + ((!ici->ops->init_videobuf || + !ici->ops->reqbufs) && + !ici->ops->init_videobuf2) || !ici->ops->add || !ici->ops->remove || !ici->ops->poll || @@ -1210,6 +1307,8 @@ int soc_camera_host_register(struct soc_camera_host *ici) ici->ops->set_parm = default_s_parm; if (!ici->ops->get_parm) ici->ops->get_parm = default_g_parm; + if (!ici->ops->enum_fsizes) + ici->ops->enum_fsizes = default_enum_fsizes; mutex_lock(&list_lock); list_for_each_entry(ix, &hosts, list) { @@ -1317,6 +1416,7 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = { .vidioc_g_input = soc_camera_g_input, .vidioc_s_input = soc_camera_s_input, .vidioc_s_std = soc_camera_s_std, + .vidioc_enum_framesizes = soc_camera_enum_fsizes, .vidioc_reqbufs = soc_camera_reqbufs, .vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap, .vidioc_querybuf = soc_camera_querybuf, diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c index 91391214c682..ed77aa055b63 100644 --- a/drivers/media/video/soc_mediabus.c +++ b/drivers/media/video/soc_mediabus.c @@ -88,7 +88,7 @@ static const struct soc_mbus_pixelfmt mbus_fmt[] = { .packing = SOC_MBUS_PACKING_EXTEND16, .order = SOC_MBUS_ORDER_LE, }, - [MBUS_IDX(GREY8_1X8)] = { + [MBUS_IDX(Y8_1X8)] = { .fourcc = V4L2_PIX_FMT_GREY, .name = "Grey", .bits_per_sample = 8, @@ -132,6 +132,20 @@ static const struct soc_mbus_pixelfmt mbus_fmt[] = { }, }; +int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf) +{ + switch (mf->packing) { + case SOC_MBUS_PACKING_NONE: + case SOC_MBUS_PACKING_EXTEND16: + return 1; + case SOC_MBUS_PACKING_2X8_PADHI: + case SOC_MBUS_PACKING_2X8_PADLO: + return 2; + } + return -EINVAL; +} +EXPORT_SYMBOL(soc_mbus_samples_per_pixel); + s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf) { switch (mf->packing) { diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/video/tlg2300/pd-video.c index df33a1d188bb..a794ae62aebf 100644 --- a/drivers/media/video/tlg2300/pd-video.c +++ b/drivers/media/video/tlg2300/pd-video.c @@ -764,10 +764,8 @@ static int pd_vidioc_s_fmt(struct poseidon *pd, struct v4l2_pix_format *pix) } ret |= send_set_req(pd, VIDEO_ROSOLU_SEL, vid_resol, &cmd_status); - if (ret || cmd_status) { - mutex_unlock(&pd->lock); + if (ret || cmd_status) return -EBUSY; - } pix_def->pixelformat = pix->pixelformat; /* save it */ pix->height = (context->tvnormid & V4L2_STD_525_60) ? 480 : 576; diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c index dfc4dd7c5097..286ec7e7062a 100644 --- a/drivers/media/video/tlv320aic23b.c +++ b/drivers/media/video/tlv320aic23b.c @@ -31,6 +31,7 @@ #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> MODULE_DESCRIPTION("tlv320aic23b driver"); MODULE_AUTHOR("Scott Alfter, Ulf Eklund, Hans Verkuil"); @@ -41,7 +42,7 @@ MODULE_LICENSE("GPL"); struct tlv320aic23b_state { struct v4l2_subdev sd; - u8 muted; + struct v4l2_ctrl_handler hdl; }; static inline struct tlv320aic23b_state *to_state(struct v4l2_subdev *sd) @@ -49,6 +50,11 @@ static inline struct tlv320aic23b_state *to_state(struct v4l2_subdev *sd) return container_of(sd, struct tlv320aic23b_state, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tlv320aic23b_state, hdl)->sd; +} + static int tlv320aic23b_write(struct v4l2_subdev *sd, int reg, u16 val) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -85,44 +91,44 @@ static int tlv320aic23b_s_clock_freq(struct v4l2_subdev *sd, u32 freq) return 0; } -static int tlv320aic23b_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tlv320aic23b_state *state = to_state(sd); - - if (ctrl->id != V4L2_CID_AUDIO_MUTE) - return -EINVAL; - ctrl->value = state->muted; - return 0; -} - -static int tlv320aic23b_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int tlv320aic23b_s_ctrl(struct v4l2_ctrl *ctrl) { - struct tlv320aic23b_state *state = to_state(sd); - - if (ctrl->id != V4L2_CID_AUDIO_MUTE) - return -EINVAL; - state->muted = ctrl->value; - tlv320aic23b_write(sd, 0, 0x180); /* mute both channels */ - /* set gain on both channels to +3.0 dB */ - if (!state->muted) - tlv320aic23b_write(sd, 0, 0x119); - return 0; + struct v4l2_subdev *sd = to_sd(ctrl); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + tlv320aic23b_write(sd, 0, 0x180); /* mute both channels */ + /* set gain on both channels to +3.0 dB */ + if (!ctrl->val) + tlv320aic23b_write(sd, 0, 0x119); + return 0; + } + return -EINVAL; } static int tlv320aic23b_log_status(struct v4l2_subdev *sd) { struct tlv320aic23b_state *state = to_state(sd); - v4l2_info(sd, "Input: %s\n", state->muted ? "muted" : "active"); + v4l2_ctrl_handler_log_status(&state->hdl, sd->name); return 0; } /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops tlv320aic23b_ctrl_ops = { + .s_ctrl = tlv320aic23b_s_ctrl, +}; + static const struct v4l2_subdev_core_ops tlv320aic23b_core_ops = { .log_status = tlv320aic23b_log_status, - .g_ctrl = tlv320aic23b_g_ctrl, - .s_ctrl = tlv320aic23b_s_ctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, }; static const struct v4l2_subdev_audio_ops tlv320aic23b_audio_ops = { @@ -161,7 +167,6 @@ static int tlv320aic23b_probe(struct i2c_client *client, return -ENOMEM; sd = &state->sd; v4l2_i2c_subdev_init(sd, client, &tlv320aic23b_ops); - state->muted = 0; /* Initialize tlv320aic23b */ @@ -177,15 +182,30 @@ static int tlv320aic23b_probe(struct i2c_client *client, tlv320aic23b_write(sd, 8, 0x000); /* activate digital interface */ tlv320aic23b_write(sd, 9, 0x001); + + v4l2_ctrl_handler_init(&state->hdl, 1); + v4l2_ctrl_new_std(&state->hdl, &tlv320aic23b_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + sd->ctrl_handler = &state->hdl; + if (state->hdl.error) { + int err = state->hdl.error; + + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); + return err; + } + v4l2_ctrl_handler_setup(&state->hdl); return 0; } static int tlv320aic23b_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct tlv320aic23b_state *state = to_state(sd); v4l2_device_unregister_subdev(sd); - kfree(to_state(sd)); + v4l2_ctrl_handler_free(&state->hdl); + kfree(state); return 0; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1cec1224913f..9363ed91a4cb 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1,7 +1,17 @@ /* - * * i2c tv tuner chip device driver * core core, i.e. kernel interfaces, registering and so on + * + * Copyright(c) by Ralph Metzler, Gerd Knorr, Gunther Mayer + * + * Copyright(c) 2005-2011 by Mauro Carvalho Chehab + * - Added support for a separate Radio tuner + * - Major rework and cleanups at the code + * + * This driver supports many devices and the idea is to let the driver + * detect which device is present. So rather than listing all supported + * devices here, we pretend to support a single, fake device type that will + * handle both radio and analog TV tuning. */ #include <linux/module.h> @@ -32,9 +42,111 @@ #define UNSET (-1U) -#define PREFIX t->i2c->driver->driver.name +#define PREFIX (t->i2c->driver->driver.name) + +/* + * Driver modprobe parameters + */ + +/* insmod options used at init time => read/only */ +static unsigned int addr; +static unsigned int no_autodetect; +static unsigned int show_i2c; + +module_param(addr, int, 0444); +module_param(no_autodetect, int, 0444); +module_param(show_i2c, int, 0444); + +/* insmod options used at runtime => read/write */ +static int tuner_debug; +static unsigned int tv_range[2] = { 44, 958 }; +static unsigned int radio_range[2] = { 65, 108 }; +static char pal[] = "--"; +static char secam[] = "--"; +static char ntsc[] = "-"; + +module_param_named(debug, tuner_debug, int, 0644); +module_param_array(tv_range, int, NULL, 0644); +module_param_array(radio_range, int, NULL, 0644); +module_param_string(pal, pal, sizeof(pal), 0644); +module_param_string(secam, secam, sizeof(secam), 0644); +module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); + +/* + * Static vars + */ + +static LIST_HEAD(tuner_list); +static const struct v4l2_subdev_ops tuner_ops; + +/* + * Debug macros + */ + +#define tuner_warn(fmt, arg...) do { \ + printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) -/** This macro allows us to probe dynamically, avoiding static links */ +#define tuner_dbg(fmt, arg...) do { \ + if (tuner_debug) \ + printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +/* + * Internal struct used inside the driver + */ + +struct tuner { + /* device */ + struct dvb_frontend fe; + struct i2c_client *i2c; + struct v4l2_subdev sd; + struct list_head list; + + /* keep track of the current settings */ + v4l2_std_id std; + unsigned int tv_freq; + unsigned int radio_freq; + unsigned int audmode; + + enum v4l2_tuner_type mode; + unsigned int mode_mask; /* Combination of allowable modes */ + + bool standby; /* Standby mode */ + + unsigned int type; /* chip type id */ + unsigned int config; + const char *name; +}; + +/* + * Function prototypes + */ + +static void set_tv_freq(struct i2c_client *c, unsigned int freq); +static void set_radio_freq(struct i2c_client *c, unsigned int freq); + +/* + * tuner attach/detach logic + */ + +/* This macro allows us to probe dynamically, avoiding static links */ #ifdef CONFIG_MEDIA_ATTACH #define tuner_symbol_probe(FUNCTION, ARGS...) ({ \ int __r = -EINVAL; \ @@ -74,92 +186,15 @@ static void tuner_detach(struct dvb_frontend *fe) } #endif -struct tuner { - /* device */ - struct dvb_frontend fe; - struct i2c_client *i2c; - struct v4l2_subdev sd; - struct list_head list; - unsigned int using_v4l2:1; - - /* keep track of the current settings */ - v4l2_std_id std; - unsigned int tv_freq; - unsigned int radio_freq; - unsigned int audmode; - - unsigned int mode; - unsigned int mode_mask; /* Combination of allowable modes */ - - unsigned int type; /* chip type id */ - unsigned int config; - const char *name; -}; static inline struct tuner *to_tuner(struct v4l2_subdev *sd) { return container_of(sd, struct tuner, sd); } - -/* insmod options used at init time => read/only */ -static unsigned int addr; -static unsigned int no_autodetect; -static unsigned int show_i2c; - -/* insmod options used at runtime => read/write */ -static int tuner_debug; - -#define tuner_warn(fmt, arg...) do { \ - printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), \ - t->i2c->addr, ##arg); \ - } while (0) - -#define tuner_info(fmt, arg...) do { \ - printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), \ - t->i2c->addr, ##arg); \ - } while (0) - -#define tuner_err(fmt, arg...) do { \ - printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), \ - t->i2c->addr, ##arg); \ - } while (0) - -#define tuner_dbg(fmt, arg...) do { \ - if (tuner_debug) \ - printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), \ - t->i2c->addr, ##arg); \ - } while (0) - -/* ------------------------------------------------------------------------ */ - -static unsigned int tv_range[2] = { 44, 958 }; -static unsigned int radio_range[2] = { 65, 108 }; - -static char pal[] = "--"; -static char secam[] = "--"; -static char ntsc[] = "-"; - - -module_param(addr, int, 0444); -module_param(no_autodetect, int, 0444); -module_param(show_i2c, int, 0444); -module_param_named(debug,tuner_debug, int, 0644); -module_param_string(pal, pal, sizeof(pal), 0644); -module_param_string(secam, secam, sizeof(secam), 0644); -module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); -module_param_array(tv_range, int, NULL, 0644); -module_param_array(radio_range, int, NULL, 0644); - -MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); -MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); -MODULE_LICENSE("GPL"); - -/* ---------------------------------------------------------------------- */ +/* + * struct analog_demod_ops callbacks + */ static void fe_set_params(struct dvb_frontend *fe, struct analog_parameters *params) @@ -215,102 +250,25 @@ static struct analog_demod_ops tuner_analog_ops = { .tuner_status = tuner_status }; -/* Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz */ -static void set_tv_freq(struct i2c_client *c, unsigned int freq) -{ - struct tuner *t = to_tuner(i2c_get_clientdata(c)); - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - - struct analog_parameters params = { - .mode = t->mode, - .audmode = t->audmode, - .std = t->std - }; - - if (t->type == UNSET) { - tuner_warn ("tuner type not set\n"); - return; - } - if (NULL == analog_ops->set_params) { - tuner_warn ("Tuner has no way to set tv freq\n"); - return; - } - if (freq < tv_range[0] * 16 || freq > tv_range[1] * 16) { - tuner_dbg ("TV freq (%d.%02d) out of range (%d-%d)\n", - freq / 16, freq % 16 * 100 / 16, tv_range[0], - tv_range[1]); - /* V4L2 spec: if the freq is not possible then the closest - possible value should be selected */ - if (freq < tv_range[0] * 16) - freq = tv_range[0] * 16; - else - freq = tv_range[1] * 16; - } - params.frequency = freq; - - analog_ops->set_params(&t->fe, ¶ms); -} - -static void set_radio_freq(struct i2c_client *c, unsigned int freq) -{ - struct tuner *t = to_tuner(i2c_get_clientdata(c)); - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - - struct analog_parameters params = { - .mode = t->mode, - .audmode = t->audmode, - .std = t->std - }; - - if (t->type == UNSET) { - tuner_warn ("tuner type not set\n"); - return; - } - if (NULL == analog_ops->set_params) { - tuner_warn ("tuner has no way to set radio frequency\n"); - return; - } - if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) { - tuner_dbg ("radio freq (%d.%02d) out of range (%d-%d)\n", - freq / 16000, freq % 16000 * 100 / 16000, - radio_range[0], radio_range[1]); - /* V4L2 spec: if the freq is not possible then the closest - possible value should be selected */ - if (freq < radio_range[0] * 16000) - freq = radio_range[0] * 16000; - else - freq = radio_range[1] * 16000; - } - params.frequency = freq; - - analog_ops->set_params(&t->fe, ¶ms); -} - -static void set_freq(struct i2c_client *c, unsigned long freq) -{ - struct tuner *t = to_tuner(i2c_get_clientdata(c)); - - switch (t->mode) { - case V4L2_TUNER_RADIO: - tuner_dbg("radio freq set to %lu.%02lu\n", - freq / 16000, freq % 16000 * 100 / 16000); - set_radio_freq(c, freq); - t->radio_freq = freq; - break; - case V4L2_TUNER_ANALOG_TV: - case V4L2_TUNER_DIGITAL_TV: - tuner_dbg("tv freq set to %lu.%02lu\n", - freq / 16, freq % 16 * 100 / 16); - set_tv_freq(c, freq); - t->tv_freq = freq; - break; - default: - tuner_dbg("freq set: unknown mode: 0x%04x!\n",t->mode); - } -} - -static struct xc5000_config xc5000_cfg; +/* + * Functions to select between radio and TV and tuner probe/remove functions + */ +/** + * set_type - Sets the tuner type for a given device + * + * @c: i2c_client descriptoy + * @type: type of the tuner (e. g. tuner number) + * @new_mode_mask: Indicates if tuner supports TV and/or Radio + * @new_config: an optional parameter ranging from 0-255 used by + a few tuners to adjust an internal parameter, + like LNA mode + * @tuner_callback: an optional function to be called when switching + * to analog mode + * + * This function applys the tuner config to tuner specified + * by tun_setup structure. It contains several per-tuner initialization "magic" + */ static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, int (*tuner_callback) (void *dev, int component, int cmd, int arg)) @@ -322,7 +280,7 @@ static void set_type(struct i2c_client *c, unsigned int type, int tune_now = 1; if (type == UNSET || type == TUNER_ABSENT) { - tuner_dbg ("tuner 0x%02x: Tuner type absent\n",c->addr); + tuner_dbg("tuner 0x%02x: Tuner type absent\n", c->addr); return; } @@ -334,12 +292,6 @@ static void set_type(struct i2c_client *c, unsigned int type, t->fe.callback = tuner_callback; } - if (t->mode == T_UNINITIALIZED) { - tuner_dbg ("tuner 0x%02x: called during i2c_client register by adapter's attach_inform\n", c->addr); - - return; - } - /* discard private data, in case set_type() was previously called */ tuner_detach(&t->fe); t->fe.analog_demod_priv = NULL; @@ -414,9 +366,12 @@ static void set_type(struct i2c_client *c, unsigned int type, break; case TUNER_XC5000: { - xc5000_cfg.i2c_address = t->i2c->addr; - /* if_khz will be set when the digital dvb_attach() occurs */ - xc5000_cfg.if_khz = 0; + struct xc5000_config xc5000_cfg = { + .i2c_address = t->i2c->addr, + /* if_khz will be set at dvb_attach() */ + .if_khz = 0, + }; + if (!dvb_attach(xc5000_attach, &t->fe, t->i2c->adapter, &xc5000_cfg)) goto attach_failed; @@ -459,8 +414,7 @@ static void set_type(struct i2c_client *c, unsigned int type, tuner_dbg("type set to %s\n", t->name); - if (t->mode_mask == T_UNINITIALIZED) - t->mode_mask = new_mode_mask; + t->mode_mask = new_mode_mask; /* Some tuners require more initialization setup before use, such as firmware download or device calibration. @@ -468,9 +422,12 @@ static void set_type(struct i2c_client *c, unsigned int type, FIXME: better to move set_freq to the tuner code. This is needed on analog tuners for PLL to properly work */ - if (tune_now) - set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? - t->radio_freq : t->tv_freq); + if (tune_now) { + if (V4L2_TUNER_RADIO == t->mode) + set_radio_freq(c, t->radio_freq); + else + set_tv_freq(c, t->tv_freq); + } tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n", c->adapter->name, c->driver->driver.name, c->addr << 1, type, @@ -480,86 +437,426 @@ static void set_type(struct i2c_client *c, unsigned int type, attach_failed: tuner_dbg("Tuner attach for type = %d failed.\n", t->type); t->type = TUNER_ABSENT; - t->mode_mask = T_UNINITIALIZED; return; } -/* - * This function apply tuner config to tuner specified - * by tun_setup structure. I addr is unset, then admin status - * and tun addr status is more precise then current status, - * it's applied. Otherwise status and type are applied only to - * tuner with exactly the same addr. -*/ - -static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) +/** + * tuner_s_type_addr - Sets the tuner type for a device + * + * @sd: subdev descriptor + * @tun_setup: type to be associated to a given tuner i2c address + * + * This function applys the tuner config to tuner specified + * by tun_setup structure. + * If tuner I2C address is UNSET, then it will only set the device + * if the tuner supports the mode specified in the call. + * If the address is specified, the change will be applied only if + * tuner I2C address matches. + * The call can change the tuner number and the tuner mode. + */ +static int tuner_s_type_addr(struct v4l2_subdev *sd, + struct tuner_setup *tun_setup) { - struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct tuner *t = to_tuner(sd); + struct i2c_client *c = v4l2_get_subdevdata(sd); - if ( (t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) && - (t->mode_mask & tun_setup->mode_mask))) || - (tun_setup->addr == c->addr)) { - set_type(c, tun_setup->type, tun_setup->mode_mask, - tun_setup->config, tun_setup->tuner_callback); + tuner_dbg("Calling set_type_addr for type=%d, addr=0x%02x, mode=0x%02x, config=0x%02x\n", + tun_setup->type, + tun_setup->addr, + tun_setup->mode_mask, + tun_setup->config); + + if ((t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) && + (t->mode_mask & tun_setup->mode_mask))) || + (tun_setup->addr == c->addr)) { + set_type(c, tun_setup->type, tun_setup->mode_mask, + tun_setup->config, tun_setup->tuner_callback); } else tuner_dbg("set addr discarded for type %i, mask %x. " "Asked to change tuner at addr 0x%02x, with mask %x\n", t->type, t->mode_mask, tun_setup->addr, tun_setup->mode_mask); + + return 0; } -static inline int check_mode(struct tuner *t, char *cmd) +/** + * tuner_s_config - Sets tuner configuration + * + * @sd: subdev descriptor + * @cfg: tuner configuration + * + * Calls tuner set_config() private function to set some tuner-internal + * parameters + */ +static int tuner_s_config(struct v4l2_subdev *sd, + const struct v4l2_priv_tun_config *cfg) { - if ((1 << t->mode & t->mode_mask) == 0) { - return -EINVAL; + struct tuner *t = to_tuner(sd); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (t->type != cfg->tuner) + return 0; + + if (analog_ops->set_config) { + analog_ops->set_config(&t->fe, cfg->priv); + return 0; } - switch (t->mode) { - case V4L2_TUNER_RADIO: - tuner_dbg("Cmd %s accepted for radio\n", cmd); - break; - case V4L2_TUNER_ANALOG_TV: - tuner_dbg("Cmd %s accepted for analog TV\n", cmd); - break; - case V4L2_TUNER_DIGITAL_TV: - tuner_dbg("Cmd %s accepted for digital TV\n", cmd); - break; + tuner_dbg("Tuner frontend module has no way to set config\n"); + return 0; +} + +/** + * tuner_lookup - Seek for tuner adapters + * + * @adap: i2c_adapter struct + * @radio: pointer to be filled if the adapter is radio + * @tv: pointer to be filled if the adapter is TV + * + * Search for existing radio and/or TV tuners on the given I2C adapter, + * discarding demod-only adapters (tda9887). + * + * Note that when this function is called from tuner_probe you can be + * certain no other devices will be added/deleted at the same time, I2C + * core protects against that. + */ +static void tuner_lookup(struct i2c_adapter *adap, + struct tuner **radio, struct tuner **tv) +{ + struct tuner *pos; + + *radio = NULL; + *tv = NULL; + + list_for_each_entry(pos, &tuner_list, list) { + int mode_mask; + + if (pos->i2c->adapter != adap || + strcmp(pos->i2c->driver->driver.name, "tuner")) + continue; + + mode_mask = pos->mode_mask; + if (*radio == NULL && mode_mask == T_RADIO) + *radio = pos; + /* Note: currently TDA9887 is the only demod-only + device. If other devices appear then we need to + make this test more general. */ + else if (*tv == NULL && pos->type != TUNER_TDA9887 && + (pos->mode_mask & T_ANALOG_TV)) + *tv = pos; + } +} + +/** + *tuner_probe - Probes the existing tuners on an I2C bus + * + * @client: i2c_client descriptor + * @id: not used + * + * This routine probes for tuners at the expected I2C addresses. On most + * cases, if a device answers to a given I2C address, it assumes that the + * device is a tuner. On a few cases, however, an additional logic is needed + * to double check if the device is really a tuner, or to identify the tuner + * type, like on tea5767/5761 devices. + * + * During client attach, set_type is called by adapter's attach_inform callback. + * set_type must then be completed by tuner_probe. + */ +static int tuner_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tuner *t; + struct tuner *radio; + struct tuner *tv; + + t = kzalloc(sizeof(struct tuner), GFP_KERNEL); + if (NULL == t) + return -ENOMEM; + v4l2_i2c_subdev_init(&t->sd, client, &tuner_ops); + t->i2c = client; + t->name = "(tuner unset)"; + t->type = UNSET; + t->audmode = V4L2_TUNER_MODE_STEREO; + t->standby = 1; + t->radio_freq = 87.5 * 16000; /* Initial freq range */ + t->tv_freq = 400 * 16; /* Sets freq to VHF High - needed for some PLL's to properly start */ + + if (show_i2c) { + unsigned char buffer[16]; + int i, rc; + + memset(buffer, 0, sizeof(buffer)); + rc = i2c_master_recv(client, buffer, sizeof(buffer)); + tuner_info("I2C RECV = "); + for (i = 0; i < rc; i++) + printk(KERN_CONT "%02x ", buffer[i]); + printk("\n"); + } + + /* autodetection code based on the i2c addr */ + if (!no_autodetect) { + switch (client->addr) { + case 0x10: + if (tuner_symbol_probe(tea5761_autodetection, + t->i2c->adapter, + t->i2c->addr) >= 0) { + t->type = TUNER_TEA5761; + t->mode_mask = T_RADIO; + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv) + tv->mode_mask &= ~T_RADIO; + + goto register_client; + } + kfree(t); + return -ENODEV; + case 0x42: + case 0x43: + case 0x4a: + case 0x4b: + /* If chip is not tda8290, don't register. + since it can be tda9887*/ + if (tuner_symbol_probe(tda829x_probe, t->i2c->adapter, + t->i2c->addr) >= 0) { + tuner_dbg("tda829x detected\n"); + } else { + /* Default is being tda9887 */ + t->type = TUNER_TDA9887; + t->mode_mask = T_RADIO | T_ANALOG_TV; + goto register_client; + } + break; + case 0x60: + if (tuner_symbol_probe(tea5767_autodetection, + t->i2c->adapter, t->i2c->addr) + >= 0) { + t->type = TUNER_TEA5767; + t->mode_mask = T_RADIO; + /* Sets freq to FM range */ + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv) + tv->mode_mask &= ~T_RADIO; + + goto register_client; + } + break; + } + } + + /* Initializes only the first TV tuner on this adapter. Why only the + first? Because there are some devices (notably the ones with TI + tuners) that have more than one i2c address for the *same* device. + Experience shows that, except for just one case, the first + address is the right one. The exception is a Russian tuner + (ACORP_Y878F). So, the desired behavior is just to enable the + first found TV tuner. */ + tuner_lookup(t->i2c->adapter, &radio, &tv); + if (tv == NULL) { + t->mode_mask = T_ANALOG_TV; + if (radio == NULL) + t->mode_mask |= T_RADIO; + tuner_dbg("Setting mode_mask to 0x%02x\n", t->mode_mask); + } + + /* Should be just before return */ +register_client: + /* Sets a default mode */ + if (t->mode_mask & T_ANALOG_TV) + t->mode = V4L2_TUNER_ANALOG_TV; + else + t->mode = V4L2_TUNER_RADIO; + set_type(client, t->type, t->mode_mask, t->config, t->fe.callback); + list_add_tail(&t->list, &tuner_list); + + tuner_info("Tuner %d found with type(s)%s%s.\n", + t->type, + t->mode_mask & T_RADIO ? " Radio" : "", + t->mode_mask & T_ANALOG_TV ? " TV" : ""); + return 0; +} + +/** + * tuner_remove - detaches a tuner + * + * @client: i2c_client descriptor + */ + +static int tuner_remove(struct i2c_client *client) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(client)); + + v4l2_device_unregister_subdev(&t->sd); + tuner_detach(&t->fe); + t->fe.analog_demod_priv = NULL; + + list_del(&t->list); + kfree(t); + return 0; +} + +/* + * Functions to switch between Radio and TV + * + * A few cards have a separate I2C tuner for radio. Those routines + * take care of switching between TV/Radio mode, filtering only the + * commands that apply to the Radio or TV tuner. + */ + +/** + * check_mode - Verify if tuner supports the requested mode + * @t: a pointer to the module's internal struct_tuner + * + * This function checks if the tuner is capable of tuning analog TV, + * digital TV or radio, depending on what the caller wants. If the + * tuner can't support that mode, it returns -EINVAL. Otherwise, it + * returns 0. + * This function is needed for boards that have a separate tuner for + * radio (like devices with tea5767). + */ +static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode) +{ + if ((1 << mode & t->mode_mask) == 0) + return -EINVAL; + + return 0; +} + +/** + * set_mode_freq - Switch tuner to other mode. + * @client: struct i2c_client pointer + * @t: a pointer to the module's internal struct_tuner + * @mode: enum v4l2_type (radio or TV) + * @freq: frequency to set (0 means to use the previous one) + * + * If tuner doesn't support the needed mode (radio or TV), prints a + * debug message and returns -EINVAL, changing its state to standby. + * Otherwise, changes the state and sets frequency to the last value, if + * the tuner can sleep or if it supports both Radio and TV. + */ +static int set_mode_freq(struct i2c_client *client, struct tuner *t, + enum v4l2_tuner_type mode, unsigned int freq) +{ + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + if (mode != t->mode) { + if (check_mode(t, mode) == -EINVAL) { + tuner_dbg("Tuner doesn't support mode %d. " + "Putting tuner to sleep\n", mode); + t->standby = true; + if (analog_ops->standby) + analog_ops->standby(&t->fe); + return -EINVAL; + } + t->mode = mode; + tuner_dbg("Changing to mode %d\n", mode); } + if (t->mode == V4L2_TUNER_RADIO) { + if (freq) + t->radio_freq = freq; + set_radio_freq(client, t->radio_freq); + } else { + if (freq) + t->tv_freq = freq; + set_tv_freq(client, t->tv_freq); + } + return 0; } -/* get more precise norm info from insmod option */ +/* + * Functions that are specific for TV mode + */ + +/** + * set_tv_freq - Set tuner frequency, freq in Units of 62.5 kHz = 1/16MHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ +static void set_tv_freq(struct i2c_client *c, unsigned int freq) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + + if (t->type == UNSET) { + tuner_warn("tuner type not set\n"); + return; + } + if (NULL == analog_ops->set_params) { + tuner_warn("Tuner has no way to set tv freq\n"); + return; + } + if (freq < tv_range[0] * 16 || freq > tv_range[1] * 16) { + tuner_dbg("TV freq (%d.%02d) out of range (%d-%d)\n", + freq / 16, freq % 16 * 100 / 16, tv_range[0], + tv_range[1]); + /* V4L2 spec: if the freq is not possible then the closest + possible value should be selected */ + if (freq < tv_range[0] * 16) + freq = tv_range[0] * 16; + else + freq = tv_range[1] * 16; + } + params.frequency = freq; + tuner_dbg("tv freq set to %d.%02d\n", + freq / 16, freq % 16 * 100 / 16); + t->tv_freq = freq; + t->standby = false; + + analog_ops->set_params(&t->fe, ¶ms); +} + +/** + * tuner_fixup_std - force a given video standard variant + * + * @t: tuner internal struct + * + * A few devices or drivers have problem to detect some standard variations. + * On other operational systems, the drivers generally have a per-country + * code, and some logic to apply per-country hacks. V4L2 API doesn't provide + * such hacks. Instead, it relies on a proper video standard selection from + * the userspace application. However, as some apps are buggy, not allowing + * to distinguish all video standard variations, a modprobe parameter can + * be used to force a video standard match. + */ static int tuner_fixup_std(struct tuner *t) { if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { switch (pal[0]) { case '6': - tuner_dbg ("insmod fixup: PAL => PAL-60\n"); + tuner_dbg("insmod fixup: PAL => PAL-60\n"); t->std = V4L2_STD_PAL_60; break; case 'b': case 'B': case 'g': case 'G': - tuner_dbg ("insmod fixup: PAL => PAL-BG\n"); + tuner_dbg("insmod fixup: PAL => PAL-BG\n"); t->std = V4L2_STD_PAL_BG; break; case 'i': case 'I': - tuner_dbg ("insmod fixup: PAL => PAL-I\n"); + tuner_dbg("insmod fixup: PAL => PAL-I\n"); t->std = V4L2_STD_PAL_I; break; case 'd': case 'D': case 'k': case 'K': - tuner_dbg ("insmod fixup: PAL => PAL-DK\n"); + tuner_dbg("insmod fixup: PAL => PAL-DK\n"); t->std = V4L2_STD_PAL_DK; break; case 'M': case 'm': - tuner_dbg ("insmod fixup: PAL => PAL-M\n"); + tuner_dbg("insmod fixup: PAL => PAL-M\n"); t->std = V4L2_STD_PAL_M; break; case 'N': @@ -568,7 +865,7 @@ static int tuner_fixup_std(struct tuner *t) tuner_dbg("insmod fixup: PAL => PAL-Nc\n"); t->std = V4L2_STD_PAL_Nc; } else { - tuner_dbg ("insmod fixup: PAL => PAL-N\n"); + tuner_dbg("insmod fixup: PAL => PAL-N\n"); t->std = V4L2_STD_PAL_N; } break; @@ -576,7 +873,7 @@ static int tuner_fixup_std(struct tuner *t) /* default parameter, do nothing */ break; default: - tuner_warn ("pal= argument not recognised\n"); + tuner_warn("pal= argument not recognised\n"); break; } } @@ -589,22 +886,24 @@ static int tuner_fixup_std(struct tuner *t) case 'h': case 'H': tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n"); - t->std = V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; + t->std = V4L2_STD_SECAM_B | + V4L2_STD_SECAM_G | + V4L2_STD_SECAM_H; break; case 'd': case 'D': case 'k': case 'K': - tuner_dbg ("insmod fixup: SECAM => SECAM-DK\n"); + tuner_dbg("insmod fixup: SECAM => SECAM-DK\n"); t->std = V4L2_STD_SECAM_DK; break; case 'l': case 'L': - if ((secam[1]=='C')||(secam[1]=='c')) { - tuner_dbg ("insmod fixup: SECAM => SECAM-L'\n"); + if ((secam[1] == 'C') || (secam[1] == 'c')) { + tuner_dbg("insmod fixup: SECAM => SECAM-L'\n"); t->std = V4L2_STD_SECAM_LC; } else { - tuner_dbg ("insmod fixup: SECAM => SECAM-L\n"); + tuner_dbg("insmod fixup: SECAM => SECAM-L\n"); t->std = V4L2_STD_SECAM_L; } break; @@ -612,7 +911,7 @@ static int tuner_fixup_std(struct tuner *t) /* default parameter, do nothing */ break; default: - tuner_warn ("secam= argument not recognised\n"); + tuner_warn("secam= argument not recognised\n"); break; } } @@ -645,6 +944,66 @@ static int tuner_fixup_std(struct tuner *t) return 0; } +/* + * Functions that are specific for Radio mode + */ + +/** + * set_radio_freq - Set tuner frequency, freq in Units of 62.5 Hz = 1/16kHz + * + * @c: i2c_client descriptor + * @freq: frequency + */ +static void set_radio_freq(struct i2c_client *c, unsigned int freq) +{ + struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + + if (t->type == UNSET) { + tuner_warn("tuner type not set\n"); + return; + } + if (NULL == analog_ops->set_params) { + tuner_warn("tuner has no way to set radio frequency\n"); + return; + } + if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) { + tuner_dbg("radio freq (%d.%02d) out of range (%d-%d)\n", + freq / 16000, freq % 16000 * 100 / 16000, + radio_range[0], radio_range[1]); + /* V4L2 spec: if the freq is not possible then the closest + possible value should be selected */ + if (freq < radio_range[0] * 16000) + freq = radio_range[0] * 16000; + else + freq = radio_range[1] * 16000; + } + params.frequency = freq; + tuner_dbg("radio freq set to %d.%02d\n", + freq / 16000, freq % 16000 * 100 / 16000); + t->radio_freq = freq; + t->standby = false; + + analog_ops->set_params(&t->fe, ¶ms); +} + +/* + * Debug function for reporting tuner status to userspace + */ + +/** + * tuner_status - Dumps the current tuner status at dmesg + * @fe: pointer to struct dvb_frontend + * + * This callback is used only for driver debug purposes, answering to + * VIDIOC_LOG_STATUS. No changes should happen on this call. + */ static void tuner_status(struct dvb_frontend *fe) { struct tuner *t = fe->analog_demod_priv; @@ -654,10 +1013,16 @@ static void tuner_status(struct dvb_frontend *fe) const char *p; switch (t->mode) { - case V4L2_TUNER_RADIO: p = "radio"; break; - case V4L2_TUNER_ANALOG_TV: p = "analog TV"; break; - case V4L2_TUNER_DIGITAL_TV: p = "digital TV"; break; - default: p = "undefined"; break; + case V4L2_TUNER_RADIO: + p = "radio"; + break; + case V4L2_TUNER_DIGITAL_TV: + p = "digital TV"; + break; + case V4L2_TUNER_ANALOG_TV: + default: + p = "analog TV"; + break; } if (t->mode == V4L2_TUNER_RADIO) { freq = t->radio_freq / 16000; @@ -666,11 +1031,12 @@ static void tuner_status(struct dvb_frontend *fe) freq = t->tv_freq / 16; freq_fraction = (t->tv_freq % 16) * 100 / 16; } - tuner_info("Tuner mode: %s\n", p); + tuner_info("Tuner mode: %s%s\n", p, + t->standby ? " on standby mode" : ""); tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction); tuner_info("Standard: 0x%08lx\n", (unsigned long)t->std); if (t->mode != V4L2_TUNER_RADIO) - return; + return; if (fe_tuner_ops->get_status) { u32 tuner_status; @@ -683,132 +1049,58 @@ static void tuner_status(struct dvb_frontend *fe) if (analog_ops->has_signal) tuner_info("Signal strength: %d\n", analog_ops->has_signal(fe)); - if (analog_ops->is_stereo) - tuner_info("Stereo: %s\n", - analog_ops->is_stereo(fe) ? "yes" : "no"); } -/* ---------------------------------------------------------------------- */ - /* - * Switch tuner to other mode. If tuner support both tv and radio, - * set another frequency to some value (This is needed for some pal - * tuners to avoid locking). Otherwise, just put second tuner in - * standby mode. + * Function to splicitly change mode to radio. Probably not needed anymore */ -static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, char *cmd) -{ - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - - if (mode == t->mode) - return 0; - - t->mode = mode; - - if (check_mode(t, cmd) == -EINVAL) { - tuner_dbg("Tuner doesn't support this mode. " - "Putting tuner to sleep\n"); - t->mode = T_STANDBY; - if (analog_ops->standby) - analog_ops->standby(&t->fe); - return -EINVAL; - } - return 0; -} - -#define switch_v4l2() if (!t->using_v4l2) \ - tuner_dbg("switching to v4l2\n"); \ - t->using_v4l2 = 1; - -static inline int check_v4l2(struct tuner *t) -{ - /* bttv still uses both v4l1 and v4l2 calls to the tuner (v4l2 for - TV, v4l1 for radio), until that is fixed this code is disabled. - Otherwise the radio (v4l1) wouldn't tune after using the TV (v4l2) - first. */ - return 0; -} - -static int tuner_s_type_addr(struct v4l2_subdev *sd, struct tuner_setup *type) -{ - struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - tuner_dbg("Calling set_type_addr for type=%d, addr=0x%02x, mode=0x%02x, config=0x%02x\n", - type->type, - type->addr, - type->mode_mask, - type->config); - - set_addr(client, type); - return 0; -} - static int tuner_s_radio(struct v4l2_subdev *sd) { struct tuner *t = to_tuner(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode(client, t, V4L2_TUNER_RADIO, "s_radio") == -EINVAL) + if (set_mode_freq(client, t, V4L2_TUNER_RADIO, 0) == -EINVAL) return 0; - if (t->radio_freq) - set_freq(client, t->radio_freq); return 0; } +/* + * Tuner callbacks to handle userspace ioctl's + */ + +/** + * tuner_s_power - controls the power state of the tuner + * @sd: pointer to struct v4l2_subdev + * @on: a zero value puts the tuner to sleep + */ static int tuner_s_power(struct v4l2_subdev *sd, int on) { struct tuner *t = to_tuner(sd); struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; + /* FIXME: Why this function don't wake the tuner if on != 0 ? */ if (on) return 0; tuner_dbg("Putting tuner to sleep\n"); - - if (check_mode(t, "s_power") == -EINVAL) - return 0; - t->mode = T_STANDBY; + t->standby = true; if (analog_ops->standby) analog_ops->standby(&t->fe); return 0; } -static int tuner_s_config(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *cfg) -{ - struct tuner *t = to_tuner(sd); - struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - - if (t->type != cfg->tuner) - return 0; - - if (analog_ops->set_config) { - analog_ops->set_config(&t->fe, cfg->priv); - return 0; - } - - tuner_dbg("Tuner frontend module has no way to set config\n"); - return 0; -} - -/* --- v4l ioctls --- */ -/* take care: bttv does userspace copying, we'll get a - kernel pointer here... */ static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tuner *t = to_tuner(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode(client, t, V4L2_TUNER_ANALOG_TV, "s_std") == -EINVAL) + if (set_mode_freq(client, t, V4L2_TUNER_ANALOG_TV, 0) == -EINVAL) return 0; - switch_v4l2(); - t->std = std; tuner_fixup_std(t); - if (t->tv_freq) - set_freq(client, t->tv_freq); + return 0; } @@ -817,10 +1109,8 @@ static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) struct tuner *t = to_tuner(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode(client, t, f->type, "s_frequency") == -EINVAL) + if (set_mode_freq(client, t, f->type, f->frequency) == -EINVAL) return 0; - switch_v4l2(); - set_freq(client, f->frequency); return 0; } @@ -830,21 +1120,20 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) struct tuner *t = to_tuner(sd); struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - if (check_mode(t, "g_frequency") == -EINVAL) + if (check_mode(t, f->type) == -EINVAL) return 0; - switch_v4l2(); f->type = t->mode; - if (fe_tuner_ops->get_frequency) { + if (fe_tuner_ops->get_frequency && !t->standby) { u32 abs_freq; fe_tuner_ops->get_frequency(&t->fe, &abs_freq); f->frequency = (V4L2_TUNER_RADIO == t->mode) ? DIV_ROUND_CLOSEST(abs_freq * 2, 125) : DIV_ROUND_CLOSEST(abs_freq, 62500); - return 0; + } else { + f->frequency = (V4L2_TUNER_RADIO == t->mode) ? + t->radio_freq : t->tv_freq; } - f->frequency = (V4L2_TUNER_RADIO == t->mode) ? - t->radio_freq : t->tv_freq; return 0; } @@ -854,10 +1143,8 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - if (check_mode(t, "g_tuner") == -EINVAL) + if (check_mode(t, vt->type) == -EINVAL) return 0; - switch_v4l2(); - vt->type = t->mode; if (analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); @@ -870,8 +1157,7 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) } /* radio mode */ - vt->rxsubchans = - V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; if (fe_tuner_ops->get_status) { u32 tuner_status; @@ -880,21 +1166,14 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) (tuner_status & TUNER_STATUS_STEREO) ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; - } else { - if (analog_ops->is_stereo) { - vt->rxsubchans = - analog_ops->is_stereo(&t->fe) ? - V4L2_TUNER_SUB_STEREO : - V4L2_TUNER_SUB_MONO; - } } if (analog_ops->has_signal) vt->signal = analog_ops->has_signal(&t->fe); - vt->capability |= - V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; vt->audmode = t->audmode; vt->rangelow = radio_range[0] * 16000; vt->rangehigh = radio_range[1] * 16000; + return 0; } @@ -903,16 +1182,12 @@ static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) struct tuner *t = to_tuner(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (check_mode(t, "s_tuner") == -EINVAL) + if (set_mode_freq(client, t, vt->type, 0) == -EINVAL) return 0; - switch_v4l2(); + if (t->mode == V4L2_TUNER_RADIO) + t->audmode = vt->audmode; - /* do nothing unless we're a radio tuner */ - if (t->mode != V4L2_TUNER_RADIO) - return 0; - t->audmode = vt->audmode; - set_radio_freq(client, t->radio_freq); return 0; } @@ -929,9 +1204,13 @@ static int tuner_log_status(struct v4l2_subdev *sd) static int tuner_suspend(struct i2c_client *c, pm_message_t state) { struct tuner *t = to_tuner(i2c_get_clientdata(c)); + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; tuner_dbg("suspend\n"); - /* FIXME: power down ??? */ + + if (!t->standby && analog_ops->standby) + analog_ops->standby(&t->fe); + return 0; } @@ -940,13 +1219,10 @@ static int tuner_resume(struct i2c_client *c) struct tuner *t = to_tuner(i2c_get_clientdata(c)); tuner_dbg("resume\n"); - if (V4L2_TUNER_RADIO == t->mode) { - if (t->radio_freq) - set_freq(c, t->radio_freq); - } else { - if (t->tv_freq) - set_freq(c, t->tv_freq); - } + + if (!t->standby) + set_mode_freq(c, t, t->type, 0); + return 0; } @@ -964,7 +1240,9 @@ static int tuner_command(struct i2c_client *client, unsigned cmd, void *arg) return -ENOIOCTLCMD; } -/* ----------------------------------------------------------------------- */ +/* + * Callback structs + */ static const struct v4l2_subdev_core_ops tuner_core_ops = { .log_status = tuner_log_status, @@ -987,183 +1265,10 @@ static const struct v4l2_subdev_ops tuner_ops = { .tuner = &tuner_tuner_ops, }; -/* ---------------------------------------------------------------------- */ - -static LIST_HEAD(tuner_list); - -/* Search for existing radio and/or TV tuners on the given I2C adapter. - Note that when this function is called from tuner_probe you can be - certain no other devices will be added/deleted at the same time, I2C - core protects against that. */ -static void tuner_lookup(struct i2c_adapter *adap, - struct tuner **radio, struct tuner **tv) -{ - struct tuner *pos; - - *radio = NULL; - *tv = NULL; - - list_for_each_entry(pos, &tuner_list, list) { - int mode_mask; - - if (pos->i2c->adapter != adap || - strcmp(pos->i2c->driver->driver.name, "tuner")) - continue; - - mode_mask = pos->mode_mask & ~T_STANDBY; - if (*radio == NULL && mode_mask == T_RADIO) - *radio = pos; - /* Note: currently TDA9887 is the only demod-only - device. If other devices appear then we need to - make this test more general. */ - else if (*tv == NULL && pos->type != TUNER_TDA9887 && - (pos->mode_mask & (T_ANALOG_TV | T_DIGITAL_TV))) - *tv = pos; - } -} - -/* During client attach, set_type is called by adapter's attach_inform callback. - set_type must then be completed by tuner_probe. +/* + * I2C structs and module init functions */ -static int tuner_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct tuner *t; - struct tuner *radio; - struct tuner *tv; - - t = kzalloc(sizeof(struct tuner), GFP_KERNEL); - if (NULL == t) - return -ENOMEM; - v4l2_i2c_subdev_init(&t->sd, client, &tuner_ops); - t->i2c = client; - t->name = "(tuner unset)"; - t->type = UNSET; - t->audmode = V4L2_TUNER_MODE_STEREO; - t->mode_mask = T_UNINITIALIZED; - - if (show_i2c) { - unsigned char buffer[16]; - int i, rc; - - memset(buffer, 0, sizeof(buffer)); - rc = i2c_master_recv(client, buffer, sizeof(buffer)); - tuner_info("I2C RECV = "); - for (i = 0; i < rc; i++) - printk(KERN_CONT "%02x ", buffer[i]); - printk("\n"); - } - /* autodetection code based on the i2c addr */ - if (!no_autodetect) { - switch (client->addr) { - case 0x10: - if (tuner_symbol_probe(tea5761_autodetection, - t->i2c->adapter, - t->i2c->addr) >= 0) { - t->type = TUNER_TEA5761; - t->mode_mask = T_RADIO; - t->mode = T_STANDBY; - /* Sets freq to FM range */ - t->radio_freq = 87.5 * 16000; - tuner_lookup(t->i2c->adapter, &radio, &tv); - if (tv) - tv->mode_mask &= ~T_RADIO; - - goto register_client; - } - kfree(t); - return -ENODEV; - case 0x42: - case 0x43: - case 0x4a: - case 0x4b: - /* If chip is not tda8290, don't register. - since it can be tda9887*/ - if (tuner_symbol_probe(tda829x_probe, t->i2c->adapter, - t->i2c->addr) >= 0) { - tuner_dbg("tda829x detected\n"); - } else { - /* Default is being tda9887 */ - t->type = TUNER_TDA9887; - t->mode_mask = T_RADIO | T_ANALOG_TV | - T_DIGITAL_TV; - t->mode = T_STANDBY; - goto register_client; - } - break; - case 0x60: - if (tuner_symbol_probe(tea5767_autodetection, - t->i2c->adapter, t->i2c->addr) - >= 0) { - t->type = TUNER_TEA5767; - t->mode_mask = T_RADIO; - t->mode = T_STANDBY; - /* Sets freq to FM range */ - t->radio_freq = 87.5 * 16000; - tuner_lookup(t->i2c->adapter, &radio, &tv); - if (tv) - tv->mode_mask &= ~T_RADIO; - - goto register_client; - } - break; - } - } - - /* Initializes only the first TV tuner on this adapter. Why only the - first? Because there are some devices (notably the ones with TI - tuners) that have more than one i2c address for the *same* device. - Experience shows that, except for just one case, the first - address is the right one. The exception is a Russian tuner - (ACORP_Y878F). So, the desired behavior is just to enable the - first found TV tuner. */ - tuner_lookup(t->i2c->adapter, &radio, &tv); - if (tv == NULL) { - t->mode_mask = T_ANALOG_TV | T_DIGITAL_TV; - if (radio == NULL) - t->mode_mask |= T_RADIO; - tuner_dbg("Setting mode_mask to 0x%02x\n", t->mode_mask); - t->tv_freq = 400 * 16; /* Sets freq to VHF High */ - t->radio_freq = 87.5 * 16000; /* Sets freq to FM range */ - } - - /* Should be just before return */ -register_client: - tuner_info("chip found @ 0x%x (%s)\n", client->addr << 1, - client->adapter->name); - - /* Sets a default mode */ - if (t->mode_mask & T_ANALOG_TV) { - t->mode = V4L2_TUNER_ANALOG_TV; - } else if (t->mode_mask & T_RADIO) { - t->mode = V4L2_TUNER_RADIO; - } else { - t->mode = V4L2_TUNER_DIGITAL_TV; - } - set_type(client, t->type, t->mode_mask, t->config, t->fe.callback); - list_add_tail(&t->list, &tuner_list); - return 0; -} - -static int tuner_remove(struct i2c_client *client) -{ - struct tuner *t = to_tuner(i2c_get_clientdata(client)); - - v4l2_device_unregister_subdev(&t->sd); - tuner_detach(&t->fe); - t->fe.analog_demod_priv = NULL; - - list_del(&t->list); - kfree(t); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -/* This driver supports many devices and the idea is to let the driver - detect which device is present. So rather than listing all supported - devices here, we pretend to support a single, fake device type. */ static const struct i2c_device_id tuner_id[] = { { "tuner", }, /* autodetect */ { } @@ -1196,10 +1301,6 @@ static __exit void exit_tuner(void) module_init(init_tuner); module_exit(exit_tuner); -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ +MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); +MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 45bcf0358a1d..9b3e828b0775 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -37,6 +37,7 @@ #include <media/v4l2-common.h> #include <media/v4l2-mediabus.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> #include <media/tvp514x.h> #include "tvp514x_regs.h" @@ -97,6 +98,7 @@ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable); */ struct tvp514x_decoder { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; const struct tvp514x_platform_data *pdata; @@ -238,6 +240,11 @@ static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd) return container_of(sd, struct tvp514x_decoder, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd; +} + /** * tvp514x_read_reg() - Read a value from a register in an TVP5146/47. @@ -719,213 +726,54 @@ static int tvp514x_s_routing(struct v4l2_subdev *sd, } /** - * tvp514x_queryctrl() - V4L2 decoder interface handler for queryctrl - * @sd: pointer to standard V4L2 sub-device structure - * @qctrl: standard V4L2 v4l2_queryctrl structure - * - * If the requested control is supported, returns the control information. - * Otherwise, returns -EINVAL if the control is not supported. - */ -static int -tvp514x_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl) -{ - int err = -EINVAL; - - if (qctrl == NULL) - return err; - - switch (qctrl->id) { - case V4L2_CID_BRIGHTNESS: - /* Brightness supported is (0-255), */ - err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128); - break; - case V4L2_CID_CONTRAST: - case V4L2_CID_SATURATION: - /** - * Saturation and Contrast supported is - - * Contrast: 0 - 255 (Default - 128) - * Saturation: 0 - 255 (Default - 128) - */ - err = v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 128); - break; - case V4L2_CID_HUE: - /* Hue Supported is - - * Hue - -180 - +180 (Default - 0, Step - +180) - */ - err = v4l2_ctrl_query_fill(qctrl, -180, 180, 180, 0); - break; - case V4L2_CID_AUTOGAIN: - /** - * Auto Gain supported is - - * 0 - 1 (Default - 1) - */ - err = v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1); - break; - default: - v4l2_err(sd, "invalid control id %d\n", qctrl->id); - return err; - } - - v4l2_dbg(1, debug, sd, "Query Control:%s: Min - %d, Max - %d, Def - %d\n", - qctrl->name, qctrl->minimum, qctrl->maximum, - qctrl->default_value); - - return err; -} - -/** - * tvp514x_g_ctrl() - V4L2 decoder interface handler for g_ctrl - * @sd: pointer to standard V4L2 sub-device structure - * @ctrl: pointer to v4l2_control structure - * - * If the requested control is supported, returns the control's current - * value from the decoder. Otherwise, returns -EINVAL if the control is not - * supported. - */ -static int -tvp514x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tvp514x_decoder *decoder = to_decoder(sd); - - if (ctrl == NULL) - return -EINVAL; - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val; - break; - case V4L2_CID_CONTRAST: - ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val; - break; - case V4L2_CID_SATURATION: - ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val; - break; - case V4L2_CID_HUE: - ctrl->value = decoder->tvp514x_regs[REG_HUE].val; - if (ctrl->value == 0x7F) - ctrl->value = 180; - else if (ctrl->value == 0x80) - ctrl->value = -180; - else - ctrl->value = 0; - - break; - case V4L2_CID_AUTOGAIN: - ctrl->value = decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val; - if ((ctrl->value & 0x3) == 3) - ctrl->value = 1; - else - ctrl->value = 0; - - break; - default: - v4l2_err(sd, "invalid control id %d\n", ctrl->id); - return -EINVAL; - } - - v4l2_dbg(1, debug, sd, "Get Control: ID - %d - %d\n", - ctrl->id, ctrl->value); - return 0; -} - -/** * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl - * @sd: pointer to standard V4L2 sub-device structure - * @ctrl: pointer to v4l2_control structure + * @ctrl: pointer to v4l2_ctrl structure * * If the requested control is supported, sets the control's current * value in HW. Otherwise, returns -EINVAL if the control is not supported. */ -static int -tvp514x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl) { + struct v4l2_subdev *sd = to_sd(ctrl); struct tvp514x_decoder *decoder = to_decoder(sd); int err = -EINVAL, value; - if (ctrl == NULL) - return err; - - value = ctrl->value; + value = ctrl->val; switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - if (ctrl->value < 0 || ctrl->value > 255) { - v4l2_err(sd, "invalid brightness setting %d\n", - ctrl->value); - return -ERANGE; - } - err = tvp514x_write_reg(sd, REG_BRIGHTNESS, - value); - if (err) - return err; - - decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; + err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value); + if (!err) + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; break; case V4L2_CID_CONTRAST: - if (ctrl->value < 0 || ctrl->value > 255) { - v4l2_err(sd, "invalid contrast setting %d\n", - ctrl->value); - return -ERANGE; - } err = tvp514x_write_reg(sd, REG_CONTRAST, value); - if (err) - return err; - - decoder->tvp514x_regs[REG_CONTRAST].val = value; + if (!err) + decoder->tvp514x_regs[REG_CONTRAST].val = value; break; case V4L2_CID_SATURATION: - if (ctrl->value < 0 || ctrl->value > 255) { - v4l2_err(sd, "invalid saturation setting %d\n", - ctrl->value); - return -ERANGE; - } err = tvp514x_write_reg(sd, REG_SATURATION, value); - if (err) - return err; - - decoder->tvp514x_regs[REG_SATURATION].val = value; + if (!err) + decoder->tvp514x_regs[REG_SATURATION].val = value; break; case V4L2_CID_HUE: if (value == 180) value = 0x7F; else if (value == -180) value = 0x80; - else if (value == 0) - value = 0; - else { - v4l2_err(sd, "invalid hue setting %d\n", ctrl->value); - return -ERANGE; - } err = tvp514x_write_reg(sd, REG_HUE, value); - if (err) - return err; - - decoder->tvp514x_regs[REG_HUE].val = value; + if (!err) + decoder->tvp514x_regs[REG_HUE].val = value; break; case V4L2_CID_AUTOGAIN: - if (value == 1) - value = 0x0F; - else if (value == 0) - value = 0x0C; - else { - v4l2_err(sd, "invalid auto gain setting %d\n", - ctrl->value); - return -ERANGE; - } - err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value); - if (err) - return err; - - decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; + err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c); + if (!err) + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; break; - default: - v4l2_err(sd, "invalid control id %d\n", ctrl->id); - return err; } v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n", - ctrl->id, ctrl->value); - + ctrl->id, ctrl->val); return err; } @@ -1104,10 +952,18 @@ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable) return err; } -static const struct v4l2_subdev_core_ops tvp514x_core_ops = { - .queryctrl = tvp514x_queryctrl, - .g_ctrl = tvp514x_g_ctrl, +static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = { .s_ctrl = tvp514x_s_ctrl, +}; + +static const struct v4l2_subdev_core_ops tvp514x_core_ops = { + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = tvp514x_s_std, }; @@ -1190,6 +1046,27 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) sd = &decoder->sd; v4l2_i2c_subdev_init(sd, client, &tvp514x_ops); + v4l2_ctrl_handler_init(&decoder->hdl, 5); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_HUE, -180, 180, 180, 0); + v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); + v4l2_info(sd, "%s decoder driver registered !!\n", sd->name); return 0; @@ -1209,6 +1086,7 @@ static int tvp514x_remove(struct i2c_client *client) struct tvp514x_decoder *decoder = to_decoder(sd); v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); kfree(decoder); return 0; } diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 58927664d3ea..e927d25e0d35 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -12,6 +12,7 @@ #include <media/v4l2-device.h> #include <media/tvp5150.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> #include "tvp5150_reg.h" @@ -24,58 +25,14 @@ static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-2)"); -/* supported controls */ -static struct v4l2_queryctrl tvp5150_qctrl[] = { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = 0, - .maximum = 255, - .step = 1, - .default_value = 128, - .flags = 0, - }, { - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0, - .maximum = 255, - .step = 0x1, - .default_value = 128, - .flags = 0, - }, { - .id = V4L2_CID_SATURATION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", - .minimum = 0, - .maximum = 255, - .step = 0x1, - .default_value = 128, - .flags = 0, - }, { - .id = V4L2_CID_HUE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Hue", - .minimum = -128, - .maximum = 127, - .step = 0x1, - .default_value = 0, - .flags = 0, - } -}; - struct tvp5150 { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; v4l2_std_id norm; /* Current set standard */ u32 input; u32 output; int enable; - int bright; - int contrast; - int hue; - int sat; }; static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) @@ -83,6 +40,11 @@ static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd) return container_of(sd, struct tvp5150, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp5150, hdl)->sd; +} + static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr) { struct i2c_client *c = v4l2_get_subdevdata(sd); @@ -775,27 +737,6 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std) static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) { struct tvp5150 *decoder = to_tvp5150(sd); - u8 msb_id, lsb_id, msb_rom, lsb_rom; - - msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID); - lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID); - msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER); - lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER); - - if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */ - v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id); - - /* ITU-T BT.656.4 timing */ - tvp5150_write(sd, TVP5150_REV_SELECT, 0); - } else { - if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */ - v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id); - } else { - v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n", - msb_id, lsb_id); - v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom); - } - } /* Initializes TVP5150 to its default values */ tvp5150_write_inittab(sd, tvp5150_init_default); @@ -810,64 +751,28 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val) tvp5150_write_inittab(sd, tvp5150_init_enable); /* Initialize image preferences */ - tvp5150_write(sd, TVP5150_BRIGHT_CTL, decoder->bright); - tvp5150_write(sd, TVP5150_CONTRAST_CTL, decoder->contrast); - tvp5150_write(sd, TVP5150_SATURATION_CTL, decoder->contrast); - tvp5150_write(sd, TVP5150_HUE_CTL, decoder->hue); + v4l2_ctrl_handler_setup(&decoder->hdl); tvp5150_set_std(sd, decoder->norm); return 0; }; -static int tvp5150_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - v4l2_dbg(1, debug, sd, "g_ctrl called\n"); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = tvp5150_read(sd, TVP5150_BRIGHT_CTL); - return 0; - case V4L2_CID_CONTRAST: - ctrl->value = tvp5150_read(sd, TVP5150_CONTRAST_CTL); - return 0; - case V4L2_CID_SATURATION: - ctrl->value = tvp5150_read(sd, TVP5150_SATURATION_CTL); - return 0; - case V4L2_CID_HUE: - ctrl->value = tvp5150_read(sd, TVP5150_HUE_CTL); - return 0; - } - return -EINVAL; -} - -static int tvp5150_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl) { - u8 i, n; - n = ARRAY_SIZE(tvp5150_qctrl); - - for (i = 0; i < n; i++) { - if (ctrl->id != tvp5150_qctrl[i].id) - continue; - if (ctrl->value < tvp5150_qctrl[i].minimum || - ctrl->value > tvp5150_qctrl[i].maximum) - return -ERANGE; - v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n", - ctrl->id, ctrl->value); - break; - } + struct v4l2_subdev *sd = to_sd(ctrl); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->value); + tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val); return 0; case V4L2_CID_CONTRAST: - tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->value); + tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val); return 0; case V4L2_CID_SATURATION: - tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->value); + tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val); return 0; case V4L2_CID_HUE: - tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->value); + tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val); return 0; } return -EINVAL; @@ -995,29 +900,21 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) return 0; } -static int tvp5150_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - int i; - - v4l2_dbg(1, debug, sd, "queryctrl called\n"); - - for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++) - if (qc->id && qc->id == tvp5150_qctrl[i].id) { - memcpy(qc, &(tvp5150_qctrl[i]), - sizeof(*qc)); - return 0; - } - - return -EINVAL; -} - /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = { + .s_ctrl = tvp5150_s_ctrl, +}; + static const struct v4l2_subdev_core_ops tvp5150_core_ops = { .log_status = tvp5150_log_status, - .g_ctrl = tvp5150_g_ctrl, - .s_ctrl = tvp5150_s_ctrl, - .queryctrl = tvp5150_queryctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = tvp5150_s_std, .reset = tvp5150_reset, .g_chip_ident = tvp5150_g_chip_ident, @@ -1059,6 +956,7 @@ static int tvp5150_probe(struct i2c_client *c, { struct tvp5150 *core; struct v4l2_subdev *sd; + u8 msb_id, lsb_id, msb_rom, lsb_rom; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(c->adapter, @@ -1074,13 +972,48 @@ static int tvp5150_probe(struct i2c_client *c, v4l_info(c, "chip found @ 0x%02x (%s)\n", c->addr << 1, c->adapter->name); + msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID); + lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID); + msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER); + lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER); + + if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */ + v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id); + + /* ITU-T BT.656.4 timing */ + tvp5150_write(sd, TVP5150_REV_SELECT, 0); + } else { + if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */ + v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id); + } else { + v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n", + msb_id, lsb_id); + v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom); + } + } + core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->input = TVP5150_COMPOSITE1; core->enable = 1; - core->bright = 128; - core->contrast = 128; - core->hue = 0; - core->sat = 128; + + v4l2_ctrl_handler_init(&core->hdl, 4); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 128); + v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + sd->ctrl_handler = &core->hdl; + if (core->hdl.error) { + int err = core->hdl.error; + + v4l2_ctrl_handler_free(&core->hdl); + kfree(core); + return err; + } + v4l2_ctrl_handler_setup(&core->hdl); if (debug > 1) tvp5150_log_status(sd); @@ -1090,12 +1023,14 @@ static int tvp5150_probe(struct i2c_client *c, static int tvp5150_remove(struct i2c_client *c) { struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct tvp5150 *decoder = to_tvp5150(sd); v4l2_dbg(1, debug, sd, "tvp5150.c: removing tvp5150 adapter on address 0x%x\n", c->addr << 1); v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&decoder->hdl); kfree(to_tvp5150(sd)); return 0; } diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c index c799e4eb6fcd..b799851bf3d0 100644 --- a/drivers/media/video/tvp7002.c +++ b/drivers/media/video/tvp7002.c @@ -32,6 +32,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> #include "tvp7002_reg.h" MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver"); @@ -421,13 +422,13 @@ static const struct tvp7002_preset_definition tvp7002_presets[] = { /* Device definition */ struct tvp7002 { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; const struct tvp7002_config *pdata; int ver; int streaming; const struct tvp7002_preset_definition *current_preset; - u8 gain; }; /* @@ -441,6 +442,11 @@ static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd) return container_of(sd, struct tvp7002, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct tvp7002, hdl)->sd; +} + /* * tvp7002_read - Read a value from a register in an TVP7002 * @sd: ptr to v4l2_subdev struct @@ -606,78 +612,25 @@ static int tvp7002_s_dv_preset(struct v4l2_subdev *sd, } /* - * tvp7002_g_ctrl() - Get a control - * @sd: ptr to v4l2_subdev struct - * @ctrl: ptr to v4l2_control struct - * - * Get a control for a TVP7002 decoder device. - * Returns zero when successful or -EINVAL if register access fails. - */ -static int tvp7002_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tvp7002 *device = to_tvp7002(sd); - - switch (ctrl->id) { - case V4L2_CID_GAIN: - ctrl->value = device->gain; - return 0; - default: - return -EINVAL; - } -} - -/* * tvp7002_s_ctrl() - Set a control - * @sd: ptr to v4l2_subdev struct - * @ctrl: ptr to v4l2_control struct + * @ctrl: ptr to v4l2_ctrl struct * * Set a control in TVP7002 decoder device. * Returns zero when successful or -EINVAL if register access fails. */ -static int tvp7002_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int tvp7002_s_ctrl(struct v4l2_ctrl *ctrl) { - struct tvp7002 *device = to_tvp7002(sd); + struct v4l2_subdev *sd = to_sd(ctrl); int error = 0; switch (ctrl->id) { case V4L2_CID_GAIN: - tvp7002_write_err(sd, TVP7002_R_FINE_GAIN, - ctrl->value & 0xff, &error); - tvp7002_write_err(sd, TVP7002_G_FINE_GAIN, - ctrl->value & 0xff, &error); - tvp7002_write_err(sd, TVP7002_B_FINE_GAIN, - ctrl->value & 0xff, &error); - - if (error < 0) - return error; - - /* Set only after knowing there is no error */ - device->gain = ctrl->value & 0xff; - return 0; - default: - return -EINVAL; - } -} - -/* - * tvp7002_queryctrl() - Query a control - * @sd: ptr to v4l2_subdev struct - * @qc: ptr to v4l2_queryctrl struct - * - * Query a control of a TVP7002 decoder device. - * Returns zero when successful or -EINVAL if register read fails. - */ -static int tvp7002_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_GAIN: - /* - * Gain is supported [0-255, default=0, step=1] - */ - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 0); - default: - return -EINVAL; + tvp7002_write_err(sd, TVP7002_R_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_G_FINE_GAIN, ctrl->val, &error); + tvp7002_write_err(sd, TVP7002_B_FINE_GAIN, ctrl->val, &error); + return error; } + return -EINVAL; } /* @@ -924,7 +877,7 @@ static int tvp7002_log_status(struct v4l2_subdev *sd) device->streaming ? "yes" : "no"); /* Print the current value of the gain control */ - v4l2_info(sd, "Gain: %u\n", device->gain); + v4l2_ctrl_handler_log_status(&device->hdl, sd->name); return 0; } @@ -946,13 +899,21 @@ static int tvp7002_enum_dv_presets(struct v4l2_subdev *sd, return v4l_fill_dv_preset_info(tvp7002_presets[preset->index].preset, preset); } +static const struct v4l2_ctrl_ops tvp7002_ctrl_ops = { + .s_ctrl = tvp7002_s_ctrl, +}; + /* V4L2 core operation handlers */ static const struct v4l2_subdev_core_ops tvp7002_core_ops = { .g_chip_ident = tvp7002_g_chip_ident, .log_status = tvp7002_log_status, - .g_ctrl = tvp7002_g_ctrl, - .s_ctrl = tvp7002_s_ctrl, - .queryctrl = tvp7002_queryctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = tvp7002_g_register, .s_register = tvp7002_s_register, @@ -977,12 +938,6 @@ static const struct v4l2_subdev_ops tvp7002_ops = { .video = &tvp7002_video_ops, }; -static struct tvp7002 tvp7002_dev = { - .streaming = 0, - .current_preset = tvp7002_presets, - .gain = 0, -}; - /* * tvp7002_probe - Probe a TVP7002 device * @c: ptr to i2c_client struct @@ -1013,14 +968,14 @@ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) return -ENODEV; } - device = kmalloc(sizeof(struct tvp7002), GFP_KERNEL); + device = kzalloc(sizeof(struct tvp7002), GFP_KERNEL); if (!device) return -ENOMEM; - *device = tvp7002_dev; sd = &device->sd; device->pdata = c->dev.platform_data; + device->current_preset = tvp7002_presets; /* Tell v4l2 the device is ready */ v4l2_i2c_subdev_init(sd, c, &tvp7002_ops); @@ -1060,6 +1015,19 @@ static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id) preset.preset = device->current_preset->preset; error = tvp7002_s_dv_preset(sd, &preset); + v4l2_ctrl_handler_init(&device->hdl, 1); + v4l2_ctrl_new_std(&device->hdl, &tvp7002_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 0); + sd->ctrl_handler = &device->hdl; + if (device->hdl.error) { + int err = device->hdl.error; + + v4l2_ctrl_handler_free(&device->hdl); + kfree(device); + return err; + } + v4l2_ctrl_handler_setup(&device->hdl); + found_error: if (error < 0) kfree(device); @@ -1083,6 +1051,7 @@ static int tvp7002_remove(struct i2c_client *c) "on address 0x%x\n", c->addr); v4l2_device_unregister_subdev(sd); + v4l2_ctrl_handler_free(&device->hdl); kfree(device); return 0; } diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index a1e9dfb52f69..6459b8cba223 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1264,6 +1264,14 @@ static int uvc_scan_chain_entity(struct uvc_video_chain *chain, break; + case UVC_OTT_VENDOR_SPECIFIC: + case UVC_OTT_DISPLAY: + case UVC_OTT_MEDIA_TRANSPORT_OUTPUT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" OT %d", entity->id); + + break; + case UVC_TT_STREAMING: if (UVC_ENTITY_IS_ITERM(entity)) { if (uvc_trace_param & UVC_TRACE_PROBE) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 5673d673504b..545c0294813d 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -89,15 +89,19 @@ int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, struct uvc_streaming_control *ctrl) { - struct uvc_format *format; + struct uvc_format *format = NULL; struct uvc_frame *frame = NULL; unsigned int i; - if (ctrl->bFormatIndex <= 0 || - ctrl->bFormatIndex > stream->nformats) - return; + for (i = 0; i < stream->nformats; ++i) { + if (stream->format[i].index == ctrl->bFormatIndex) { + format = &stream->format[i]; + break; + } + } - format = &stream->format[ctrl->bFormatIndex - 1]; + if (format == NULL) + return; for (i = 0; i < format->nframes; ++i) { if (format->frame[i].bFrameIndex == ctrl->bFrameIndex) { diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 810eef43c216..06b9f9f82013 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -59,7 +59,6 @@ #include <asm/pgtable.h> #include <asm/io.h> #include <asm/div64.h> -#define __OLD_VIDIOC_ /* To allow fixing old calls*/ #include <media/v4l2-common.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> @@ -81,69 +80,6 @@ MODULE_LICENSE("GPL"); * Video Standard Operations (contributed by Michael Schimek) */ - -/* ----------------------------------------------------------------- */ -/* priority handling */ - -#define V4L2_PRIO_VALID(val) (val == V4L2_PRIORITY_BACKGROUND || \ - val == V4L2_PRIORITY_INTERACTIVE || \ - val == V4L2_PRIORITY_RECORD) - -void v4l2_prio_init(struct v4l2_prio_state *global) -{ - memset(global, 0, sizeof(*global)); -} -EXPORT_SYMBOL(v4l2_prio_init); - -int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, - enum v4l2_priority new) -{ - if (!V4L2_PRIO_VALID(new)) - return -EINVAL; - if (*local == new) - return 0; - - atomic_inc(&global->prios[new]); - if (V4L2_PRIO_VALID(*local)) - atomic_dec(&global->prios[*local]); - *local = new; - return 0; -} -EXPORT_SYMBOL(v4l2_prio_change); - -void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local) -{ - v4l2_prio_change(global, local, V4L2_PRIORITY_DEFAULT); -} -EXPORT_SYMBOL(v4l2_prio_open); - -void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local) -{ - if (V4L2_PRIO_VALID(local)) - atomic_dec(&global->prios[local]); -} -EXPORT_SYMBOL(v4l2_prio_close); - -enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global) -{ - if (atomic_read(&global->prios[V4L2_PRIORITY_RECORD]) > 0) - return V4L2_PRIORITY_RECORD; - if (atomic_read(&global->prios[V4L2_PRIORITY_INTERACTIVE]) > 0) - return V4L2_PRIORITY_INTERACTIVE; - if (atomic_read(&global->prios[V4L2_PRIORITY_BACKGROUND]) > 0) - return V4L2_PRIORITY_BACKGROUND; - return V4L2_PRIORITY_UNSET; -} -EXPORT_SYMBOL(v4l2_prio_max); - -int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local) -{ - return (local < v4l2_prio_max(global)) ? -EBUSY : 0; -} -EXPORT_SYMBOL(v4l2_prio_check); - -/* ----------------------------------------------------------------- */ - /* Helper functions for control handling */ /* Check for correctness of the ctrl's value based on the data from diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index dc82eb83c1d4..7c2694738b31 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -14,7 +14,6 @@ */ #include <linux/compat.h> -#define __OLD_VIDIOC_ /* To allow fixing old calls*/ #include <linux/videodev2.h> #include <linux/module.h> #include <media/v4l2-ioctl.h> @@ -97,6 +96,14 @@ static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pi return 0; } +static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, + struct v4l2_pix_format_mplane __user *up) +{ + if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane))) + return -EFAULT; + return 0; +} + static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up) { if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format))) @@ -104,6 +111,14 @@ static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pi return 0; } +static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, + struct v4l2_pix_format_mplane __user *up) +{ + if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane))) + return -EFAULT; + return 0; +} + static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up) { if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format))) @@ -136,6 +151,7 @@ struct v4l2_format32 { enum v4l2_buf_type type; union { struct v4l2_pix_format pix; + struct v4l2_pix_format_mplane pix_mp; struct v4l2_window32 win; struct v4l2_vbi_format vbi; struct v4l2_sliced_vbi_format sliced; @@ -152,6 +168,10 @@ static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: return get_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix); + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + return get_v4l2_pix_format_mplane(&kp->fmt.pix_mp, + &up->fmt.pix_mp); case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return get_v4l2_window32(&kp->fmt.win, &up->fmt.win); @@ -181,6 +201,10 @@ static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: return put_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix); + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + return put_v4l2_pix_format_mplane(&kp->fmt.pix_mp, + &up->fmt.pix_mp); case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return put_v4l2_window32(&kp->fmt.win, &up->fmt.win); @@ -232,6 +256,17 @@ static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 return 0; } +struct v4l2_plane32 { + __u32 bytesused; + __u32 length; + union { + __u32 mem_offset; + compat_long_t userptr; + } m; + __u32 data_offset; + __u32 reserved[11]; +}; + struct v4l2_buffer32 { __u32 index; enum v4l2_buf_type type; @@ -247,14 +282,64 @@ struct v4l2_buffer32 { union { __u32 offset; compat_long_t userptr; + compat_caddr_t planes; } m; __u32 length; __u32 input; __u32 reserved; }; +static int get_v4l2_plane32(struct v4l2_plane *up, struct v4l2_plane32 *up32, + enum v4l2_memory memory) +{ + void __user *up_pln; + compat_long_t p; + + if (copy_in_user(up, up32, 2 * sizeof(__u32)) || + copy_in_user(&up->data_offset, &up32->data_offset, + sizeof(__u32))) + return -EFAULT; + + if (memory == V4L2_MEMORY_USERPTR) { + if (get_user(p, &up32->m.userptr)) + return -EFAULT; + up_pln = compat_ptr(p); + if (put_user((unsigned long)up_pln, &up->m.userptr)) + return -EFAULT; + } else { + if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, + sizeof(__u32))) + return -EFAULT; + } + + return 0; +} + +static int put_v4l2_plane32(struct v4l2_plane *up, struct v4l2_plane32 *up32, + enum v4l2_memory memory) +{ + if (copy_in_user(up32, up, 2 * sizeof(__u32)) || + copy_in_user(&up32->data_offset, &up->data_offset, + sizeof(__u32))) + return -EFAULT; + + /* For MMAP, driver might've set up the offset, so copy it back. + * USERPTR stays the same (was userspace-provided), so no copying. */ + if (memory == V4L2_MEMORY_MMAP) + if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, + sizeof(__u32))) + return -EFAULT; + + return 0; +} + static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) { + struct v4l2_plane32 __user *uplane32; + struct v4l2_plane __user *uplane; + compat_caddr_t p; + int num_planes; + int ret; if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) || get_user(kp->index, &up->index) || @@ -263,33 +348,84 @@ static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user get_user(kp->memory, &up->memory) || get_user(kp->input, &up->input)) return -EFAULT; - switch (kp->memory) { - case V4L2_MEMORY_MMAP: - if (get_user(kp->length, &up->length) || - get_user(kp->m.offset, &up->m.offset)) + + if (V4L2_TYPE_IS_OUTPUT(kp->type)) + if (get_user(kp->bytesused, &up->bytesused) || + get_user(kp->field, &up->field) || + get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + get_user(kp->timestamp.tv_usec, + &up->timestamp.tv_usec)) return -EFAULT; - break; - case V4L2_MEMORY_USERPTR: - { - compat_long_t tmp; - if (get_user(kp->length, &up->length) || - get_user(tmp, &up->m.userptr)) + if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { + if (get_user(kp->length, &up->length)) return -EFAULT; - kp->m.userptr = (unsigned long)compat_ptr(tmp); + num_planes = kp->length; + if (num_planes == 0) { + kp->m.planes = NULL; + /* num_planes == 0 is legal, e.g. when userspace doesn't + * need planes array on DQBUF*/ + return 0; } - break; - case V4L2_MEMORY_OVERLAY: - if (get_user(kp->m.offset, &up->m.offset)) + + if (get_user(p, &up->m.planes)) return -EFAULT; - break; + + uplane32 = compat_ptr(p); + if (!access_ok(VERIFY_READ, uplane32, + num_planes * sizeof(struct v4l2_plane32))) + return -EFAULT; + + /* We don't really care if userspace decides to kill itself + * by passing a very big num_planes value */ + uplane = compat_alloc_user_space(num_planes * + sizeof(struct v4l2_plane)); + kp->m.planes = uplane; + + while (--num_planes >= 0) { + ret = get_v4l2_plane32(uplane, uplane32, kp->memory); + if (ret) + return ret; + ++uplane; + ++uplane32; + } + } else { + switch (kp->memory) { + case V4L2_MEMORY_MMAP: + if (get_user(kp->length, &up->length) || + get_user(kp->m.offset, &up->m.offset)) + return -EFAULT; + break; + case V4L2_MEMORY_USERPTR: + { + compat_long_t tmp; + + if (get_user(kp->length, &up->length) || + get_user(tmp, &up->m.userptr)) + return -EFAULT; + + kp->m.userptr = (unsigned long)compat_ptr(tmp); + } + break; + case V4L2_MEMORY_OVERLAY: + if (get_user(kp->m.offset, &up->m.offset)) + return -EFAULT; + break; + } } + return 0; } static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) { + struct v4l2_plane32 __user *uplane32; + struct v4l2_plane __user *uplane; + compat_caddr_t p; + int num_planes; + int ret; + if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) || put_user(kp->index, &up->index) || put_user(kp->type, &up->type) || @@ -297,22 +433,7 @@ static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user put_user(kp->memory, &up->memory) || put_user(kp->input, &up->input)) return -EFAULT; - switch (kp->memory) { - case V4L2_MEMORY_MMAP: - if (put_user(kp->length, &up->length) || - put_user(kp->m.offset, &up->m.offset)) - return -EFAULT; - break; - case V4L2_MEMORY_USERPTR: - if (put_user(kp->length, &up->length) || - put_user(kp->m.userptr, &up->m.userptr)) - return -EFAULT; - break; - case V4L2_MEMORY_OVERLAY: - if (put_user(kp->m.offset, &up->m.offset)) - return -EFAULT; - break; - } + if (put_user(kp->bytesused, &up->bytesused) || put_user(kp->field, &up->field) || put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || @@ -321,6 +442,43 @@ static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user put_user(kp->sequence, &up->sequence) || put_user(kp->reserved, &up->reserved)) return -EFAULT; + + if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { + num_planes = kp->length; + if (num_planes == 0) + return 0; + + uplane = kp->m.planes; + if (get_user(p, &up->m.planes)) + return -EFAULT; + uplane32 = compat_ptr(p); + + while (--num_planes >= 0) { + ret = put_v4l2_plane32(uplane, uplane32, kp->memory); + if (ret) + return ret; + ++uplane; + ++uplane32; + } + } else { + switch (kp->memory) { + case V4L2_MEMORY_MMAP: + if (put_user(kp->length, &up->length) || + put_user(kp->m.offset, &up->m.offset)) + return -EFAULT; + break; + case V4L2_MEMORY_USERPTR: + if (put_user(kp->length, &up->length) || + put_user(kp->m.userptr, &up->m.userptr)) + return -EFAULT; + break; + case V4L2_MEMORY_OVERLAY: + if (put_user(kp->m.offset, &up->m.offset)) + return -EFAULT; + break; + } + } + return 0; } @@ -442,12 +600,13 @@ static int get_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(struct v4l2_ext_control))) + if (!access_ok(VERIFY_READ, ucontrols, + n * sizeof(struct v4l2_ext_control32))) return -EFAULT; kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control)); kp->controls = kcontrols; while (--n >= 0) { - if (copy_in_user(kcontrols, ucontrols, sizeof(*kcontrols))) + if (copy_in_user(kcontrols, ucontrols, sizeof(*ucontrols))) return -EFAULT; if (ctrl_is_pointer(kcontrols->id)) { void __user *s; @@ -483,7 +642,8 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(struct v4l2_ext_control))) + if (!access_ok(VERIFY_WRITE, ucontrols, + n * sizeof(struct v4l2_ext_control32))) return -EFAULT; while (--n >= 0) { @@ -517,9 +677,6 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext #define VIDIOC_TRY_EXT_CTRLS32 _IOWR('V', 73, struct v4l2_ext_controls32) #define VIDIOC_OVERLAY32 _IOW ('V', 14, s32) -#ifdef __OLD_VIDIOC_ -#define VIDIOC_OVERLAY32_OLD _IOWR('V', 14, s32) -#endif #define VIDIOC_STREAMON32 _IOW ('V', 18, s32) #define VIDIOC_STREAMOFF32 _IOW ('V', 19, s32) #define VIDIOC_G_INPUT32 _IOR ('V', 38, s32) @@ -559,9 +716,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar case VIDIOC_S_EXT_CTRLS32: cmd = VIDIOC_S_EXT_CTRLS; break; case VIDIOC_TRY_EXT_CTRLS32: cmd = VIDIOC_TRY_EXT_CTRLS; break; case VIDIOC_OVERLAY32: cmd = VIDIOC_OVERLAY; break; -#ifdef __OLD_VIDIOC_ - case VIDIOC_OVERLAY32_OLD: cmd = VIDIOC_OVERLAY; break; -#endif case VIDIOC_STREAMON32: cmd = VIDIOC_STREAMON; break; case VIDIOC_STREAMOFF32: cmd = VIDIOC_STREAMOFF; break; case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break; @@ -695,14 +849,6 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) return ret; switch (cmd) { -#ifdef __OLD_VIDIOC_ - case VIDIOC_OVERLAY32_OLD: - case VIDIOC_S_PARM_OLD: - case VIDIOC_S_CTRL_OLD: - case VIDIOC_G_AUDIO_OLD: - case VIDIOC_G_AUDOUT_OLD: - case VIDIOC_CROPCAP_OLD: -#endif case VIDIOC_QUERYCAP: case VIDIOC_RESERVED: case VIDIOC_ENUM_FMT: diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index ef66d2af0c57..2412f08527aa 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1364,6 +1364,8 @@ EXPORT_SYMBOL(v4l2_queryctrl); int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) { + if (qc->id & V4L2_CTRL_FLAG_NEXT_CTRL) + return -EINVAL; return v4l2_queryctrl(sd->ctrl_handler, qc); } EXPORT_SYMBOL(v4l2_subdev_queryctrl); diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 341764a3a990..498e6742579e 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -143,6 +143,7 @@ static inline void video_put(struct video_device *vdev) static void v4l2_device_release(struct device *cd) { struct video_device *vdev = to_video_device(cd); + struct v4l2_device *v4l2_dev = vdev->v4l2_dev; mutex_lock(&videodev_lock); if (video_device[vdev->minor] != vdev) { @@ -169,6 +170,10 @@ static void v4l2_device_release(struct device *cd) /* Release video_device and perform other cleanups as needed. */ vdev->release(vdev); + + /* Decrease v4l2_device refcount */ + if (v4l2_dev) + v4l2_device_put(v4l2_dev); } static struct class video_class = { @@ -182,6 +187,70 @@ struct video_device *video_devdata(struct file *file) } EXPORT_SYMBOL(video_devdata); + +/* Priority handling */ + +static inline bool prio_is_valid(enum v4l2_priority prio) +{ + return prio == V4L2_PRIORITY_BACKGROUND || + prio == V4L2_PRIORITY_INTERACTIVE || + prio == V4L2_PRIORITY_RECORD; +} + +void v4l2_prio_init(struct v4l2_prio_state *global) +{ + memset(global, 0, sizeof(*global)); +} +EXPORT_SYMBOL(v4l2_prio_init); + +int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, + enum v4l2_priority new) +{ + if (!prio_is_valid(new)) + return -EINVAL; + if (*local == new) + return 0; + + atomic_inc(&global->prios[new]); + if (prio_is_valid(*local)) + atomic_dec(&global->prios[*local]); + *local = new; + return 0; +} +EXPORT_SYMBOL(v4l2_prio_change); + +void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local) +{ + v4l2_prio_change(global, local, V4L2_PRIORITY_DEFAULT); +} +EXPORT_SYMBOL(v4l2_prio_open); + +void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local) +{ + if (prio_is_valid(local)) + atomic_dec(&global->prios[local]); +} +EXPORT_SYMBOL(v4l2_prio_close); + +enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global) +{ + if (atomic_read(&global->prios[V4L2_PRIORITY_RECORD]) > 0) + return V4L2_PRIORITY_RECORD; + if (atomic_read(&global->prios[V4L2_PRIORITY_INTERACTIVE]) > 0) + return V4L2_PRIORITY_INTERACTIVE; + if (atomic_read(&global->prios[V4L2_PRIORITY_BACKGROUND]) > 0) + return V4L2_PRIORITY_BACKGROUND; + return V4L2_PRIORITY_UNSET; +} +EXPORT_SYMBOL(v4l2_prio_max); + +int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local) +{ + return (local < v4l2_prio_max(global)) ? -EBUSY : 0; +} +EXPORT_SYMBOL(v4l2_prio_check); + + static ssize_t v4l2_read(struct file *filp, char __user *buf, size_t sz, loff_t *off) { @@ -303,6 +372,9 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm) static int v4l2_open(struct inode *inode, struct file *filp) { struct video_device *vdev; +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity *entity = NULL; +#endif int ret = 0; /* Check if the video device is available */ @@ -316,6 +388,16 @@ static int v4l2_open(struct inode *inode, struct file *filp) /* and increase the device refcount */ video_get(vdev); mutex_unlock(&videodev_lock); +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + entity = media_entity_get(&vdev->entity); + if (!entity) { + ret = -EBUSY; + video_put(vdev); + return ret; + } + } +#endif if (vdev->fops->open) { if (vdev->lock && mutex_lock_interruptible(vdev->lock)) { ret = -ERESTARTSYS; @@ -331,8 +413,13 @@ static int v4l2_open(struct inode *inode, struct file *filp) err: /* decrease the refcount in case of an error */ - if (ret) + if (ret) { +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + media_entity_put(entity); +#endif video_put(vdev); + } return ret; } @@ -349,7 +436,10 @@ static int v4l2_release(struct inode *inode, struct file *filp) if (vdev->lock) mutex_unlock(vdev->lock); } - +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + media_entity_put(&vdev->entity); +#endif /* decrease the refcount unconditionally since the release() return value is ignored. */ video_put(vdev); @@ -408,13 +498,14 @@ static int get_index(struct video_device *vdev) } /** - * video_register_device - register video4linux devices + * __video_register_device - register video4linux devices * @vdev: video device structure we want to register * @type: type of device to register * @nr: which device node number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) * @warn_if_nr_in_use: warn if the desired device node number * was already in use and another number was chosen instead. + * @owner: module that owns the video device node * * The registration code assigns minor numbers and device node numbers * based on the requested type and registers the new device node with @@ -435,9 +526,11 @@ static int get_index(struct video_device *vdev) * %VFL_TYPE_VBI - Vertical blank data (undecoded) * * %VFL_TYPE_RADIO - A radio card + * + * %VFL_TYPE_SUBDEV - A subdevice */ -static int __video_register_device(struct video_device *vdev, int type, int nr, - int warn_if_nr_in_use) +int __video_register_device(struct video_device *vdev, int type, int nr, + int warn_if_nr_in_use, struct module *owner) { int i = 0; int ret; @@ -469,6 +562,9 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, case VFL_TYPE_RADIO: name_base = "radio"; break; + case VFL_TYPE_SUBDEV: + name_base = "v4l-subdev"; + break; default: printk(KERN_ERR "%s called with unknown type: %d\n", __func__, type); @@ -482,6 +578,10 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, vdev->parent = vdev->v4l2_dev->dev; if (vdev->ctrl_handler == NULL) vdev->ctrl_handler = vdev->v4l2_dev->ctrl_handler; + /* If the prio state pointer is NULL, then use the v4l2_device + prio state. */ + if (vdev->prio == NULL) + vdev->prio = &vdev->v4l2_dev->prio; } /* Part 2: find a free minor, device node number and device index. */ @@ -552,7 +652,7 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, goto cleanup; } vdev->cdev->ops = &v4l2_fops; - vdev->cdev->owner = vdev->fops->owner; + vdev->cdev->owner = owner; ret = cdev_add(vdev->cdev, MKDEV(VIDEO_MAJOR, vdev->minor), 1); if (ret < 0) { printk(KERN_ERR "%s: cdev_add failed\n", __func__); @@ -580,11 +680,31 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, printk(KERN_WARNING "%s: requested %s%d, got %s\n", __func__, name_base, nr, video_device_node_name(vdev)); - /* Part 5: Activate this minor. The char device can now be used. */ + /* Increase v4l2_device refcount */ + if (vdev->v4l2_dev) + v4l2_device_get(vdev->v4l2_dev); + +#if defined(CONFIG_MEDIA_CONTROLLER) + /* Part 5: Register the entity. */ + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L; + vdev->entity.name = vdev->name; + vdev->entity.v4l.major = VIDEO_MAJOR; + vdev->entity.v4l.minor = vdev->minor; + ret = media_device_register_entity(vdev->v4l2_dev->mdev, + &vdev->entity); + if (ret < 0) + printk(KERN_WARNING + "%s: media_device_register_entity failed\n", + __func__); + } +#endif + /* Part 6: Activate this minor. The char device can now be used. */ set_bit(V4L2_FL_REGISTERED, &vdev->flags); mutex_lock(&videodev_lock); video_device[vdev->minor] = vdev; mutex_unlock(&videodev_lock); + return 0; cleanup: @@ -597,18 +717,7 @@ cleanup: vdev->minor = -1; return ret; } - -int video_register_device(struct video_device *vdev, int type, int nr) -{ - return __video_register_device(vdev, type, nr, 1); -} -EXPORT_SYMBOL(video_register_device); - -int video_register_device_no_warn(struct video_device *vdev, int type, int nr) -{ - return __video_register_device(vdev, type, nr, 0); -} -EXPORT_SYMBOL(video_register_device_no_warn); +EXPORT_SYMBOL(__video_register_device); /** * video_unregister_device - unregister a video4linux device @@ -623,6 +732,11 @@ void video_unregister_device(struct video_device *vdev) if (!vdev || !video_is_registered(vdev)) return; +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + media_device_unregister_entity(&vdev->entity); +#endif + mutex_lock(&videodev_lock); /* This must be in a critical section to prevent a race with v4l2_open. * Once this bit has been cleared video_get may never be called again. diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index ce64fe16bc60..5aeaf876ba9b 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -36,6 +36,8 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev) INIT_LIST_HEAD(&v4l2_dev->subdevs); spin_lock_init(&v4l2_dev->lock); mutex_init(&v4l2_dev->ioctl_lock); + v4l2_prio_init(&v4l2_dev->prio); + kref_init(&v4l2_dev->ref); v4l2_dev->dev = dev; if (dev == NULL) { /* If dev == NULL, then name must be filled in by the caller */ @@ -47,13 +49,27 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev) if (!v4l2_dev->name[0]) snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "%s %s", dev->driver->name, dev_name(dev)); - if (dev_get_drvdata(dev)) - v4l2_warn(v4l2_dev, "Non-NULL drvdata on register\n"); - dev_set_drvdata(dev, v4l2_dev); + if (!dev_get_drvdata(dev)) + dev_set_drvdata(dev, v4l2_dev); return 0; } EXPORT_SYMBOL_GPL(v4l2_device_register); +static void v4l2_device_release(struct kref *ref) +{ + struct v4l2_device *v4l2_dev = + container_of(ref, struct v4l2_device, ref); + + if (v4l2_dev->release) + v4l2_dev->release(v4l2_dev); +} + +int v4l2_device_put(struct v4l2_device *v4l2_dev) +{ + return kref_put(&v4l2_dev->ref, v4l2_device_release); +} +EXPORT_SYMBOL_GPL(v4l2_device_put); + int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename, atomic_t *instance) { @@ -72,10 +88,12 @@ EXPORT_SYMBOL_GPL(v4l2_device_set_name); void v4l2_device_disconnect(struct v4l2_device *v4l2_dev) { - if (v4l2_dev->dev) { + if (v4l2_dev->dev == NULL) + return; + + if (dev_get_drvdata(v4l2_dev->dev) == v4l2_dev) dev_set_drvdata(v4l2_dev->dev, NULL); - v4l2_dev->dev = NULL; - } + v4l2_dev->dev = NULL; } EXPORT_SYMBOL_GPL(v4l2_device_disconnect); @@ -117,23 +135,30 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) EXPORT_SYMBOL_GPL(v4l2_device_unregister); int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, - struct v4l2_subdev *sd) + struct v4l2_subdev *sd) { +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity *entity = &sd->entity; +#endif int err; /* Check for valid input */ if (v4l2_dev == NULL || sd == NULL || !sd->name[0]) return -EINVAL; + /* Warn if we apparently re-register a subdev */ WARN_ON(sd->v4l2_dev != NULL); + if (!try_module_get(sd->owner)) return -ENODEV; + sd->v4l2_dev = v4l2_dev; if (sd->internal_ops && sd->internal_ops->registered) { err = sd->internal_ops->registered(sd); if (err) return err; } + /* This just returns 0 if either of the two args is NULL */ err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler); if (err) { @@ -141,24 +166,82 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, sd->internal_ops->unregistered(sd); return err; } + +#if defined(CONFIG_MEDIA_CONTROLLER) + /* Register the entity. */ + if (v4l2_dev->mdev) { + err = media_device_register_entity(v4l2_dev->mdev, entity); + if (err < 0) { + if (sd->internal_ops && sd->internal_ops->unregistered) + sd->internal_ops->unregistered(sd); + module_put(sd->owner); + return err; + } + } +#endif + spin_lock(&v4l2_dev->lock); list_add_tail(&sd->list, &v4l2_dev->subdevs); spin_unlock(&v4l2_dev->lock); + return 0; } EXPORT_SYMBOL_GPL(v4l2_device_register_subdev); +int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) +{ + struct video_device *vdev; + struct v4l2_subdev *sd; + int err; + + /* Register a device node for every subdev marked with the + * V4L2_SUBDEV_FL_HAS_DEVNODE flag. + */ + list_for_each_entry(sd, &v4l2_dev->subdevs, list) { + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE)) + continue; + + vdev = &sd->devnode; + strlcpy(vdev->name, sd->name, sizeof(vdev->name)); + vdev->v4l2_dev = v4l2_dev; + vdev->fops = &v4l2_subdev_fops; + vdev->release = video_device_release_empty; + err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1, + sd->owner); + if (err < 0) + return err; +#if defined(CONFIG_MEDIA_CONTROLLER) + sd->entity.v4l.major = VIDEO_MAJOR; + sd->entity.v4l.minor = vdev->minor; +#endif + } + return 0; +} +EXPORT_SYMBOL_GPL(v4l2_device_register_subdev_nodes); + void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) { + struct v4l2_device *v4l2_dev; + /* return if it isn't registered */ if (sd == NULL || sd->v4l2_dev == NULL) return; - spin_lock(&sd->v4l2_dev->lock); + + v4l2_dev = sd->v4l2_dev; + + spin_lock(&v4l2_dev->lock); list_del(&sd->list); - spin_unlock(&sd->v4l2_dev->lock); + spin_unlock(&v4l2_dev->lock); + if (sd->internal_ops && sd->internal_ops->unregistered) sd->internal_ops->unregistered(sd); sd->v4l2_dev = NULL; + +#if defined(CONFIG_MEDIA_CONTROLLER) + if (v4l2_dev->mdev) + media_device_unregister_entity(&sd->entity); +#endif + video_unregister_device(&sd->devnode); module_put(sd->owner); } EXPORT_SYMBOL_GPL(v4l2_device_unregister_subdev); diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/video/v4l2-fh.c index d78f184f40c5..717f71e6370e 100644 --- a/drivers/media/video/v4l2-fh.c +++ b/drivers/media/video/v4l2-fh.c @@ -23,6 +23,7 @@ */ #include <linux/bitops.h> +#include <linux/slab.h> #include <media/v4l2-dev.h> #include <media/v4l2-fh.h> #include <media/v4l2-event.h> @@ -33,6 +34,7 @@ int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) fh->vdev = vdev; INIT_LIST_HEAD(&fh->list); set_bit(V4L2_FL_USES_V4L2_FH, &fh->vdev->flags); + fh->prio = V4L2_PRIORITY_UNSET; /* * fh->events only needs to be initialized if the driver @@ -51,12 +53,28 @@ void v4l2_fh_add(struct v4l2_fh *fh) { unsigned long flags; + if (test_bit(V4L2_FL_USE_FH_PRIO, &fh->vdev->flags)) + v4l2_prio_open(fh->vdev->prio, &fh->prio); spin_lock_irqsave(&fh->vdev->fh_lock, flags); list_add(&fh->list, &fh->vdev->fh_list); spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); } EXPORT_SYMBOL_GPL(v4l2_fh_add); +int v4l2_fh_open(struct file *filp) +{ + struct video_device *vdev = video_devdata(filp); + struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL); + + filp->private_data = fh; + if (fh == NULL) + return -ENOMEM; + v4l2_fh_init(fh, vdev); + v4l2_fh_add(fh); + return 0; +} +EXPORT_SYMBOL_GPL(v4l2_fh_open); + void v4l2_fh_del(struct v4l2_fh *fh) { unsigned long flags; @@ -64,6 +82,8 @@ void v4l2_fh_del(struct v4l2_fh *fh) spin_lock_irqsave(&fh->vdev->fh_lock, flags); list_del_init(&fh->list); spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); + if (test_bit(V4L2_FL_USE_FH_PRIO, &fh->vdev->flags)) + v4l2_prio_close(fh->vdev->prio, fh->prio); } EXPORT_SYMBOL_GPL(v4l2_fh_del); @@ -77,3 +97,30 @@ void v4l2_fh_exit(struct v4l2_fh *fh) v4l2_event_free(fh); } EXPORT_SYMBOL_GPL(v4l2_fh_exit); + +int v4l2_fh_release(struct file *filp) +{ + struct v4l2_fh *fh = filp->private_data; + + if (fh) { + v4l2_fh_del(fh); + v4l2_fh_exit(fh); + kfree(fh); + } + return 0; +} +EXPORT_SYMBOL_GPL(v4l2_fh_release); + +int v4l2_fh_is_singular(struct v4l2_fh *fh) +{ + unsigned long flags; + int is_singular; + + if (fh == NULL || fh->vdev == NULL) + return 0; + spin_lock_irqsave(&fh->vdev->fh_lock, flags); + is_singular = list_is_singular(&fh->list); + spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); + return is_singular; +} +EXPORT_SYMBOL_GPL(v4l2_fh_is_singular); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index f51327ef6757..a01ed39e6c16 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -17,7 +17,6 @@ #include <linux/types.h> #include <linux/kernel.h> -#define __OLD_VIDIOC_ /* To allow fixing old calls */ #include <linux/videodev2.h> #include <media/v4l2-common.h> @@ -25,6 +24,7 @@ #include <media/v4l2-ctrls.h> #include <media/v4l2-fh.h> #include <media/v4l2-event.h> +#include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> #define dbgarg(cmd, fmt, arg...) \ @@ -165,6 +165,8 @@ const char *v4l2_type_names[] = { [V4L2_BUF_TYPE_SLICED_VBI_CAPTURE] = "sliced-vbi-cap", [V4L2_BUF_TYPE_SLICED_VBI_OUTPUT] = "sliced-vbi-out", [V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY] = "vid-out-overlay", + [V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE] = "vid-cap-mplane", + [V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE] = "vid-out-mplane", }; EXPORT_SYMBOL(v4l2_type_names); @@ -293,153 +295,37 @@ void v4l_printk_ioctl(unsigned int cmd) } EXPORT_SYMBOL(v4l_printk_ioctl); -/* - * helper function -- handles userspace copying for ioctl arguments - */ - -#ifdef __OLD_VIDIOC_ -static unsigned int -video_fix_command(unsigned int cmd) -{ - switch (cmd) { - case VIDIOC_OVERLAY_OLD: - cmd = VIDIOC_OVERLAY; - break; - case VIDIOC_S_PARM_OLD: - cmd = VIDIOC_S_PARM; - break; - case VIDIOC_S_CTRL_OLD: - cmd = VIDIOC_S_CTRL; - break; - case VIDIOC_G_AUDIO_OLD: - cmd = VIDIOC_G_AUDIO; - break; - case VIDIOC_G_AUDOUT_OLD: - cmd = VIDIOC_G_AUDOUT; - break; - case VIDIOC_CROPCAP_OLD: - cmd = VIDIOC_CROPCAP; - break; - } - return cmd; -} -#endif - -/* - * Obsolete usercopy function - Should be removed soon - */ -long -video_usercopy(struct file *file, unsigned int cmd, unsigned long arg, - v4l2_kioctl func) -{ - char sbuf[128]; - void *mbuf = NULL; - void *parg = NULL; - long err = -EINVAL; - int is_ext_ctrl; - size_t ctrls_size = 0; - void __user *user_ptr = NULL; - -#ifdef __OLD_VIDIOC_ - cmd = video_fix_command(cmd); -#endif - is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS || - cmd == VIDIOC_TRY_EXT_CTRLS); - - /* Copy arguments into temp kernel buffer */ - switch (_IOC_DIR(cmd)) { - case _IOC_NONE: - parg = NULL; - break; - case _IOC_READ: - case _IOC_WRITE: - case (_IOC_WRITE | _IOC_READ): - if (_IOC_SIZE(cmd) <= sizeof(sbuf)) { - parg = sbuf; - } else { - /* too big to allocate from stack */ - mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL); - if (NULL == mbuf) - return -ENOMEM; - parg = mbuf; - } - - err = -EFAULT; - if (_IOC_DIR(cmd) & _IOC_WRITE) - if (copy_from_user(parg, (void __user *)arg, _IOC_SIZE(cmd))) - goto out; - break; - } - if (is_ext_ctrl) { - struct v4l2_ext_controls *p = parg; - - /* In case of an error, tell the caller that it wasn't - a specific control that caused it. */ - p->error_idx = p->count; - user_ptr = (void __user *)p->controls; - if (p->count) { - ctrls_size = sizeof(struct v4l2_ext_control) * p->count; - /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */ - mbuf = kmalloc(ctrls_size, GFP_KERNEL); - err = -ENOMEM; - if (NULL == mbuf) - goto out_ext_ctrl; - err = -EFAULT; - if (copy_from_user(mbuf, user_ptr, ctrls_size)) - goto out_ext_ctrl; - p->controls = mbuf; - } - } - - /* call driver */ - err = func(file, cmd, parg); - if (err == -ENOIOCTLCMD) - err = -EINVAL; - if (is_ext_ctrl) { - struct v4l2_ext_controls *p = parg; - - p->controls = (void *)user_ptr; - if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size)) - err = -EFAULT; - goto out_ext_ctrl; - } - if (err < 0) - goto out; - -out_ext_ctrl: - /* Copy results into user buffer */ - switch (_IOC_DIR(cmd)) { - case _IOC_READ: - case (_IOC_WRITE | _IOC_READ): - if (copy_to_user((void __user *)arg, parg, _IOC_SIZE(cmd))) - err = -EFAULT; - break; - } - -out: - kfree(mbuf); - return err; -} -EXPORT_SYMBOL(video_usercopy); - static void dbgbuf(unsigned int cmd, struct video_device *vfd, struct v4l2_buffer *p) { struct v4l2_timecode *tc = &p->timecode; + struct v4l2_plane *plane; + int i; dbgarg(cmd, "%02ld:%02d:%02d.%08ld index=%d, type=%s, " - "bytesused=%d, flags=0x%08d, " - "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx, length=%d\n", + "flags=0x%08d, field=%0d, sequence=%d, memory=%s\n", p->timestamp.tv_sec / 3600, (int)(p->timestamp.tv_sec / 60) % 60, (int)(p->timestamp.tv_sec % 60), (long)p->timestamp.tv_usec, p->index, prt_names(p->type, v4l2_type_names), - p->bytesused, p->flags, - p->field, p->sequence, - prt_names(p->memory, v4l2_memory_names), - p->m.userptr, p->length); + p->flags, p->field, p->sequence, + prt_names(p->memory, v4l2_memory_names)); + + if (V4L2_TYPE_IS_MULTIPLANAR(p->type) && p->m.planes) { + for (i = 0; i < p->length; ++i) { + plane = &p->m.planes[i]; + dbgarg2("plane %d: bytesused=%d, data_offset=0x%08x " + "offset/userptr=0x%08lx, length=%d\n", + i, plane->bytesused, plane->data_offset, + plane->m.userptr, plane->length); + } + } else { + dbgarg2("bytesused=%d, offset/userptr=0x%08lx, length=%d\n", + p->bytesused, p->m.userptr, p->length); + } + dbgarg2("timecode=%02d:%02d:%02d type=%d, " "flags=0x%08d, frames=%d, userbits=0x%08x\n", tc->hours, tc->minutes, tc->seconds, @@ -467,6 +353,27 @@ static inline void v4l_print_pix_fmt(struct video_device *vfd, fmt->bytesperline, fmt->sizeimage, fmt->colorspace); }; +static inline void v4l_print_pix_fmt_mplane(struct video_device *vfd, + struct v4l2_pix_format_mplane *fmt) +{ + int i; + + dbgarg2("width=%d, height=%d, format=%c%c%c%c, field=%s, " + "colorspace=%d, num_planes=%d\n", + fmt->width, fmt->height, + (fmt->pixelformat & 0xff), + (fmt->pixelformat >> 8) & 0xff, + (fmt->pixelformat >> 16) & 0xff, + (fmt->pixelformat >> 24) & 0xff, + prt_names(fmt->field, v4l2_field_names), + fmt->colorspace, fmt->num_planes); + + for (i = 0; i < fmt->num_planes; ++i) + dbgarg2("plane %d: bytesperline=%d sizeimage=%d\n", i, + fmt->plane_fmt[i].bytesperline, + fmt->plane_fmt[i].sizeimage); +} + static inline void v4l_print_ext_ctrls(unsigned int cmd, struct video_device *vfd, struct v4l2_ext_controls *c, int show_vals) { @@ -520,7 +427,12 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_g_fmt_vid_cap) + if (ops->vidioc_g_fmt_vid_cap || + ops->vidioc_g_fmt_vid_cap_mplane) + return 0; + break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + if (ops->vidioc_g_fmt_vid_cap_mplane) return 0; break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: @@ -528,7 +440,12 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_g_fmt_vid_out) + if (ops->vidioc_g_fmt_vid_out || + ops->vidioc_g_fmt_vid_out_mplane) + return 0; + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + if (ops->vidioc_g_fmt_vid_out_mplane) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: @@ -559,12 +476,72 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) return -EINVAL; } +/** + * fmt_sp_to_mp() - Convert a single-plane format to its multi-planar 1-plane + * equivalent + */ +static int fmt_sp_to_mp(const struct v4l2_format *f_sp, + struct v4l2_format *f_mp) +{ + struct v4l2_pix_format_mplane *pix_mp = &f_mp->fmt.pix_mp; + const struct v4l2_pix_format *pix = &f_sp->fmt.pix; + + if (f_sp->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + f_mp->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + else if (f_sp->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) + f_mp->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + else + return -EINVAL; + + pix_mp->width = pix->width; + pix_mp->height = pix->height; + pix_mp->pixelformat = pix->pixelformat; + pix_mp->field = pix->field; + pix_mp->colorspace = pix->colorspace; + pix_mp->num_planes = 1; + pix_mp->plane_fmt[0].sizeimage = pix->sizeimage; + pix_mp->plane_fmt[0].bytesperline = pix->bytesperline; + + return 0; +} + +/** + * fmt_mp_to_sp() - Convert a multi-planar 1-plane format to its single-planar + * equivalent + */ +static int fmt_mp_to_sp(const struct v4l2_format *f_mp, + struct v4l2_format *f_sp) +{ + const struct v4l2_pix_format_mplane *pix_mp = &f_mp->fmt.pix_mp; + struct v4l2_pix_format *pix = &f_sp->fmt.pix; + + if (f_mp->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + f_sp->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + else if (f_mp->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + f_sp->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + else + return -EINVAL; + + pix->width = pix_mp->width; + pix->height = pix_mp->height; + pix->pixelformat = pix_mp->pixelformat; + pix->field = pix_mp->field; + pix->colorspace = pix_mp->colorspace; + pix->sizeimage = pix_mp->plane_fmt[0].sizeimage; + pix->bytesperline = pix_mp->plane_fmt[0].bytesperline; + + return 0; +} + static long __video_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vfd = video_devdata(file); const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops; void *fh = file->private_data; + struct v4l2_fh *vfh = NULL; + struct v4l2_format f_copy; + int use_fh_prio = 0; long ret = -EINVAL; if (ops == NULL) { @@ -579,6 +556,45 @@ static long __video_do_ioctl(struct file *file, printk(KERN_CONT "\n"); } + if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) { + vfh = file->private_data; + use_fh_prio = test_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + } + + if (use_fh_prio) { + switch (cmd) { + case VIDIOC_S_CTRL: + case VIDIOC_S_STD: + case VIDIOC_S_INPUT: + case VIDIOC_S_OUTPUT: + case VIDIOC_S_TUNER: + case VIDIOC_S_FREQUENCY: + case VIDIOC_S_FMT: + case VIDIOC_S_CROP: + case VIDIOC_S_AUDIO: + case VIDIOC_S_AUDOUT: + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_S_FBUF: + case VIDIOC_S_PRIORITY: + case VIDIOC_S_DV_PRESET: + case VIDIOC_S_DV_TIMINGS: + case VIDIOC_S_JPEGCOMP: + case VIDIOC_S_MODULATOR: + case VIDIOC_S_PARM: + case VIDIOC_S_HW_FREQ_SEEK: + case VIDIOC_ENCODER_CMD: + case VIDIOC_OVERLAY: + case VIDIOC_REQBUFS: + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: + ret = v4l2_prio_check(vfd->prio, vfh->prio); + if (ret) + goto exit_prio; + ret = -EINVAL; + break; + } + } + switch (cmd) { /* --- capabilities ------------------------------------------ */ @@ -605,9 +621,12 @@ static long __video_do_ioctl(struct file *file, { enum v4l2_priority *p = arg; - if (!ops->vidioc_g_priority) - break; - ret = ops->vidioc_g_priority(file, fh, p); + if (ops->vidioc_g_priority) { + ret = ops->vidioc_g_priority(file, fh, p); + } else if (use_fh_prio) { + *p = v4l2_prio_max(&vfd->v4l2_dev->prio); + ret = 0; + } if (!ret) dbgarg(cmd, "priority is %d\n", *p); break; @@ -616,10 +635,13 @@ static long __video_do_ioctl(struct file *file, { enum v4l2_priority *p = arg; - if (!ops->vidioc_s_priority) - break; + if (!ops->vidioc_s_priority && !use_fh_prio) + break; dbgarg(cmd, "setting priority to %d\n", *p); - ret = ops->vidioc_s_priority(file, fh, *p); + if (ops->vidioc_s_priority) + ret = ops->vidioc_s_priority(file, fh, *p); + else + ret = v4l2_prio_change(&vfd->v4l2_dev->prio, &vfh->prio, *p); break; } @@ -633,6 +655,11 @@ static long __video_do_ioctl(struct file *file, if (ops->vidioc_enum_fmt_vid_cap) ret = ops->vidioc_enum_fmt_vid_cap(file, fh, f); break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + if (ops->vidioc_enum_fmt_vid_cap_mplane) + ret = ops->vidioc_enum_fmt_vid_cap_mplane(file, + fh, f); + break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: if (ops->vidioc_enum_fmt_vid_overlay) ret = ops->vidioc_enum_fmt_vid_overlay(file, @@ -642,6 +669,11 @@ static long __video_do_ioctl(struct file *file, if (ops->vidioc_enum_fmt_vid_out) ret = ops->vidioc_enum_fmt_vid_out(file, fh, f); break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + if (ops->vidioc_enum_fmt_vid_out_mplane) + ret = ops->vidioc_enum_fmt_vid_out_mplane(file, + fh, f); + break; case V4L2_BUF_TYPE_PRIVATE: if (ops->vidioc_enum_fmt_type_private) ret = ops->vidioc_enum_fmt_type_private(file, @@ -670,22 +702,90 @@ static long __video_do_ioctl(struct file *file, switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_g_fmt_vid_cap) + if (ops->vidioc_g_fmt_vid_cap) { ret = ops->vidioc_g_fmt_vid_cap(file, fh, f); + } else if (ops->vidioc_g_fmt_vid_cap_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_g_fmt_vid_cap_mplane(file, fh, + &f_copy); + if (ret) + break; + + /* Driver is currently in multi-planar format, + * we can't return it in single-planar API*/ + if (f_copy.fmt.pix_mp.num_planes > 1) { + ret = -EBUSY; + break; + } + + ret = fmt_mp_to_sp(&f_copy, f); + } if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + if (ops->vidioc_g_fmt_vid_cap_mplane) { + ret = ops->vidioc_g_fmt_vid_cap_mplane(file, + fh, f); + } else if (ops->vidioc_g_fmt_vid_cap) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_g_fmt_vid_cap(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_sp_to_mp(&f_copy, f); + } + if (!ret) + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: if (ops->vidioc_g_fmt_vid_overlay) ret = ops->vidioc_g_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_g_fmt_vid_out) + if (ops->vidioc_g_fmt_vid_out) { ret = ops->vidioc_g_fmt_vid_out(file, fh, f); + } else if (ops->vidioc_g_fmt_vid_out_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_g_fmt_vid_out_mplane(file, fh, + &f_copy); + if (ret) + break; + + /* Driver is currently in multi-planar format, + * we can't return it in single-planar API*/ + if (f_copy.fmt.pix_mp.num_planes > 1) { + ret = -EBUSY; + break; + } + + ret = fmt_mp_to_sp(&f_copy, f); + } if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + if (ops->vidioc_g_fmt_vid_out_mplane) { + ret = ops->vidioc_g_fmt_vid_out_mplane(file, + fh, f); + } else if (ops->vidioc_g_fmt_vid_out) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_g_fmt_vid_out(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_sp_to_mp(&f_copy, f); + } + if (!ret) + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: if (ops->vidioc_g_fmt_vid_out_overlay) ret = ops->vidioc_g_fmt_vid_out_overlay(file, @@ -729,8 +829,44 @@ static long __video_do_ioctl(struct file *file, case V4L2_BUF_TYPE_VIDEO_CAPTURE: CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); - if (ops->vidioc_s_fmt_vid_cap) + if (ops->vidioc_s_fmt_vid_cap) { ret = ops->vidioc_s_fmt_vid_cap(file, fh, f); + } else if (ops->vidioc_s_fmt_vid_cap_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_s_fmt_vid_cap_mplane(file, fh, + &f_copy); + if (ret) + break; + + if (f_copy.fmt.pix_mp.num_planes > 1) { + /* Drivers shouldn't adjust from 1-plane + * to more than 1-plane formats */ + ret = -EBUSY; + WARN_ON(1); + break; + } + + ret = fmt_mp_to_sp(&f_copy, f); + } + break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + CLEAR_AFTER_FIELD(f, fmt.pix_mp); + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + if (ops->vidioc_s_fmt_vid_cap_mplane) { + ret = ops->vidioc_s_fmt_vid_cap_mplane(file, + fh, f); + } else if (ops->vidioc_s_fmt_vid_cap && + f->fmt.pix_mp.num_planes == 1) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_s_fmt_vid_cap(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_sp_to_mp(&f_copy, f); + } break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: CLEAR_AFTER_FIELD(f, fmt.win); @@ -741,8 +877,44 @@ static long __video_do_ioctl(struct file *file, case V4L2_BUF_TYPE_VIDEO_OUTPUT: CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); - if (ops->vidioc_s_fmt_vid_out) + if (ops->vidioc_s_fmt_vid_out) { ret = ops->vidioc_s_fmt_vid_out(file, fh, f); + } else if (ops->vidioc_s_fmt_vid_out_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_s_fmt_vid_out_mplane(file, fh, + &f_copy); + if (ret) + break; + + if (f_copy.fmt.pix_mp.num_planes > 1) { + /* Drivers shouldn't adjust from 1-plane + * to more than 1-plane formats */ + ret = -EBUSY; + WARN_ON(1); + break; + } + + ret = fmt_mp_to_sp(&f_copy, f); + } + break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + CLEAR_AFTER_FIELD(f, fmt.pix_mp); + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + if (ops->vidioc_s_fmt_vid_out_mplane) { + ret = ops->vidioc_s_fmt_vid_out_mplane(file, + fh, f); + } else if (ops->vidioc_s_fmt_vid_out && + f->fmt.pix_mp.num_planes == 1) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_s_fmt_vid_out(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_mp_to_sp(&f_copy, f); + } break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: CLEAR_AFTER_FIELD(f, fmt.win); @@ -791,11 +963,47 @@ static long __video_do_ioctl(struct file *file, switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: CLEAR_AFTER_FIELD(f, fmt.pix); - if (ops->vidioc_try_fmt_vid_cap) + if (ops->vidioc_try_fmt_vid_cap) { ret = ops->vidioc_try_fmt_vid_cap(file, fh, f); + } else if (ops->vidioc_try_fmt_vid_cap_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_try_fmt_vid_cap_mplane(file, + fh, &f_copy); + if (ret) + break; + + if (f_copy.fmt.pix_mp.num_planes > 1) { + /* Drivers shouldn't adjust from 1-plane + * to more than 1-plane formats */ + ret = -EBUSY; + WARN_ON(1); + break; + } + ret = fmt_mp_to_sp(&f_copy, f); + } if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; + case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: + CLEAR_AFTER_FIELD(f, fmt.pix_mp); + if (ops->vidioc_try_fmt_vid_cap_mplane) { + ret = ops->vidioc_try_fmt_vid_cap_mplane(file, + fh, f); + } else if (ops->vidioc_try_fmt_vid_cap && + f->fmt.pix_mp.num_planes == 1) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_try_fmt_vid_cap(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_sp_to_mp(&f_copy, f); + } + if (!ret) + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_overlay) @@ -804,11 +1012,47 @@ static long __video_do_ioctl(struct file *file, break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: CLEAR_AFTER_FIELD(f, fmt.pix); - if (ops->vidioc_try_fmt_vid_out) + if (ops->vidioc_try_fmt_vid_out) { ret = ops->vidioc_try_fmt_vid_out(file, fh, f); + } else if (ops->vidioc_try_fmt_vid_out_mplane) { + if (fmt_sp_to_mp(f, &f_copy)) + break; + ret = ops->vidioc_try_fmt_vid_out_mplane(file, + fh, &f_copy); + if (ret) + break; + + if (f_copy.fmt.pix_mp.num_planes > 1) { + /* Drivers shouldn't adjust from 1-plane + * to more than 1-plane formats */ + ret = -EBUSY; + WARN_ON(1); + break; + } + ret = fmt_mp_to_sp(&f_copy, f); + } if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + CLEAR_AFTER_FIELD(f, fmt.pix_mp); + if (ops->vidioc_try_fmt_vid_out_mplane) { + ret = ops->vidioc_try_fmt_vid_out_mplane(file, + fh, f); + } else if (ops->vidioc_try_fmt_vid_out && + f->fmt.pix_mp.num_planes == 1) { + if (fmt_mp_to_sp(f, &f_copy)) + break; + ret = ops->vidioc_try_fmt_vid_out(file, + fh, &f_copy); + if (ret) + break; + + ret = fmt_sp_to_mp(&f_copy, f); + } + if (!ret) + v4l_print_pix_fmt_mplane(vfd, &f->fmt.pix_mp); + break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_out_overlay) @@ -1942,13 +2186,18 @@ static long __video_do_ioctl(struct file *file, } default: { + bool valid_prio = true; + if (!ops->vidioc_default) break; - ret = ops->vidioc_default(file, fh, cmd, arg); + if (use_fh_prio) + valid_prio = v4l2_prio_check(vfd->prio, vfh->prio) >= 0; + ret = ops->vidioc_default(file, fh, valid_prio, cmd, arg); break; } } /* switch */ +exit_prio: if (vfd->debug & V4L2_DEBUG_IOCTL_ARG) { if (ret < 0) { v4l_print_ioctl(vfd->name, cmd); @@ -1973,7 +2222,7 @@ static unsigned long cmd_input_size(unsigned int cmd) switch (cmd) { CMDINSIZE(ENUM_FMT, fmtdesc, type); CMDINSIZE(G_FMT, format, type); - CMDINSIZE(QUERYBUF, buffer, type); + CMDINSIZE(QUERYBUF, buffer, length); CMDINSIZE(G_PARM, streamparm, type); CMDINSIZE(ENUMSTD, standard, index); CMDINSIZE(ENUMINPUT, input, index); @@ -1998,22 +2247,61 @@ static unsigned long cmd_input_size(unsigned int cmd) } } -long video_ioctl2(struct file *file, - unsigned int cmd, unsigned long arg) +static int check_array_args(unsigned int cmd, void *parg, size_t *array_size, + void * __user *user_ptr, void ***kernel_ptr) +{ + int ret = 0; + + switch (cmd) { + case VIDIOC_QUERYBUF: + case VIDIOC_QBUF: + case VIDIOC_DQBUF: { + struct v4l2_buffer *buf = parg; + + if (V4L2_TYPE_IS_MULTIPLANAR(buf->type) && buf->length > 0) { + if (buf->length > VIDEO_MAX_PLANES) { + ret = -EINVAL; + break; + } + *user_ptr = (void __user *)buf->m.planes; + *kernel_ptr = (void **)&buf->m.planes; + *array_size = sizeof(struct v4l2_plane) * buf->length; + ret = 1; + } + break; + } + + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_G_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: { + struct v4l2_ext_controls *ctrls = parg; + + if (ctrls->count != 0) { + *user_ptr = (void __user *)ctrls->controls; + *kernel_ptr = (void **)&ctrls->controls; + *array_size = sizeof(struct v4l2_ext_control) + * ctrls->count; + ret = 1; + } + break; + } + } + + return ret; +} + +long +video_usercopy(struct file *file, unsigned int cmd, unsigned long arg, + v4l2_kioctl func) { char sbuf[128]; void *mbuf = NULL; void *parg = (void *)arg; long err = -EINVAL; - int is_ext_ctrl; - size_t ctrls_size = 0; + bool has_array_args; + size_t array_size = 0; void __user *user_ptr = NULL; - -#ifdef __OLD_VIDIOC_ - cmd = video_fix_command(cmd); -#endif - is_ext_ctrl = (cmd == VIDIOC_S_EXT_CTRLS || cmd == VIDIOC_G_EXT_CTRLS || - cmd == VIDIOC_TRY_EXT_CTRLS); + void **kernel_ptr = NULL; /* Copy arguments into temp kernel buffer */ if (_IOC_DIR(cmd) != _IOC_NONE) { @@ -2043,43 +2331,43 @@ long video_ioctl2(struct file *file, } } - if (is_ext_ctrl) { - struct v4l2_ext_controls *p = parg; + err = check_array_args(cmd, parg, &array_size, &user_ptr, &kernel_ptr); + if (err < 0) + goto out; + has_array_args = err; - /* In case of an error, tell the caller that it wasn't - a specific control that caused it. */ - p->error_idx = p->count; - user_ptr = (void __user *)p->controls; - if (p->count) { - ctrls_size = sizeof(struct v4l2_ext_control) * p->count; - /* Note: v4l2_ext_controls fits in sbuf[] so mbuf is still NULL. */ - mbuf = kmalloc(ctrls_size, GFP_KERNEL); - err = -ENOMEM; - if (NULL == mbuf) - goto out_ext_ctrl; - err = -EFAULT; - if (copy_from_user(mbuf, user_ptr, ctrls_size)) - goto out_ext_ctrl; - p->controls = mbuf; - } + if (has_array_args) { + /* + * When adding new types of array args, make sure that the + * parent argument to ioctl (which contains the pointer to the + * array) fits into sbuf (so that mbuf will still remain + * unused up to here). + */ + mbuf = kmalloc(array_size, GFP_KERNEL); + err = -ENOMEM; + if (NULL == mbuf) + goto out_array_args; + err = -EFAULT; + if (copy_from_user(mbuf, user_ptr, array_size)) + goto out_array_args; + *kernel_ptr = mbuf; } /* Handles IOCTL */ - err = __video_do_ioctl(file, cmd, parg); + err = func(file, cmd, parg); if (err == -ENOIOCTLCMD) err = -EINVAL; - if (is_ext_ctrl) { - struct v4l2_ext_controls *p = parg; - p->controls = (void *)user_ptr; - if (p->count && err == 0 && copy_to_user(user_ptr, mbuf, ctrls_size)) + if (has_array_args) { + *kernel_ptr = user_ptr; + if (copy_to_user(user_ptr, mbuf, array_size)) err = -EFAULT; - goto out_ext_ctrl; + goto out_array_args; } if (err < 0) goto out; -out_ext_ctrl: +out_array_args: /* Copy results into user buffer */ switch (_IOC_DIR(cmd)) { case _IOC_READ: @@ -2093,4 +2381,11 @@ out: kfree(mbuf); return err; } +EXPORT_SYMBOL(video_usercopy); + +long video_ioctl2(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(file, cmd, arg, __video_do_ioctl); +} EXPORT_SYMBOL(video_ioctl2); diff --git a/drivers/media/video/v4l2-mem2mem.c b/drivers/media/video/v4l2-mem2mem.c index ac832a28e18e..3b15bf5892a8 100644 --- a/drivers/media/video/v4l2-mem2mem.c +++ b/drivers/media/video/v4l2-mem2mem.c @@ -5,7 +5,7 @@ * source and destination. * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * Pawel Osciak, <p.osciak@samsung.com> + * Pawel Osciak, <pawel@osciak.com> * Marek Szyprowski, <m.szyprowski@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -17,11 +17,11 @@ #include <linux/sched.h> #include <linux/slab.h> -#include <media/videobuf-core.h> +#include <media/videobuf2-core.h> #include <media/v4l2-mem2mem.h> MODULE_DESCRIPTION("Mem to mem device framework for videobuf"); -MODULE_AUTHOR("Pawel Osciak, <p.osciak@samsung.com>"); +MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>"); MODULE_LICENSE("GPL"); static bool debug; @@ -65,21 +65,16 @@ struct v4l2_m2m_dev { static struct v4l2_m2m_queue_ctx *get_queue_ctx(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) { - switch (type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - return &m2m_ctx->cap_q_ctx; - case V4L2_BUF_TYPE_VIDEO_OUTPUT: + if (V4L2_TYPE_IS_OUTPUT(type)) return &m2m_ctx->out_q_ctx; - default: - printk(KERN_ERR "Invalid buffer type\n"); - return NULL; - } + else + return &m2m_ctx->cap_q_ctx; } /** - * v4l2_m2m_get_vq() - return videobuf_queue for the given type + * v4l2_m2m_get_vq() - return vb2_queue for the given type */ -struct videobuf_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx, +struct vb2_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) { struct v4l2_m2m_queue_ctx *q_ctx; @@ -95,27 +90,20 @@ EXPORT_SYMBOL(v4l2_m2m_get_vq); /** * v4l2_m2m_next_buf() - return next buffer from the list of ready buffers */ -void *v4l2_m2m_next_buf(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) +void *v4l2_m2m_next_buf(struct v4l2_m2m_queue_ctx *q_ctx) { - struct v4l2_m2m_queue_ctx *q_ctx; - struct videobuf_buffer *vb = NULL; + struct v4l2_m2m_buffer *b = NULL; unsigned long flags; - q_ctx = get_queue_ctx(m2m_ctx, type); - if (!q_ctx) - return NULL; - - spin_lock_irqsave(q_ctx->q.irqlock, flags); + spin_lock_irqsave(&q_ctx->rdy_spinlock, flags); if (list_empty(&q_ctx->rdy_queue)) goto end; - vb = list_entry(q_ctx->rdy_queue.next, struct videobuf_buffer, queue); - vb->state = VIDEOBUF_ACTIVE; - + b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, list); end: - spin_unlock_irqrestore(q_ctx->q.irqlock, flags); - return vb; + spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); + return &b->vb; } EXPORT_SYMBOL_GPL(v4l2_m2m_next_buf); @@ -123,26 +111,21 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_next_buf); * v4l2_m2m_buf_remove() - take off a buffer from the list of ready buffers and * return it */ -void *v4l2_m2m_buf_remove(struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) +void *v4l2_m2m_buf_remove(struct v4l2_m2m_queue_ctx *q_ctx) { - struct v4l2_m2m_queue_ctx *q_ctx; - struct videobuf_buffer *vb = NULL; + struct v4l2_m2m_buffer *b = NULL; unsigned long flags; - q_ctx = get_queue_ctx(m2m_ctx, type); - if (!q_ctx) - return NULL; - - spin_lock_irqsave(q_ctx->q.irqlock, flags); + spin_lock_irqsave(&q_ctx->rdy_spinlock, flags); if (!list_empty(&q_ctx->rdy_queue)) { - vb = list_entry(q_ctx->rdy_queue.next, struct videobuf_buffer, - queue); - list_del(&vb->queue); + b = list_entry(q_ctx->rdy_queue.next, struct v4l2_m2m_buffer, + list); + list_del(&b->list); q_ctx->num_rdy--; } - spin_unlock_irqrestore(q_ctx->q.irqlock, flags); + spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); - return vb; + return &b->vb; } EXPORT_SYMBOL_GPL(v4l2_m2m_buf_remove); @@ -235,20 +218,20 @@ static void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx) return; } - spin_lock_irqsave(m2m_ctx->out_q_ctx.q.irqlock, flags); + spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); if (list_empty(&m2m_ctx->out_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(m2m_ctx->out_q_ctx.q.irqlock, flags); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No input buffers available\n"); return; } if (list_empty(&m2m_ctx->cap_q_ctx.rdy_queue)) { - spin_unlock_irqrestore(m2m_ctx->out_q_ctx.q.irqlock, flags); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); dprintk("No output buffers available\n"); return; } - spin_unlock_irqrestore(m2m_ctx->out_q_ctx.q.irqlock, flags); + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); if (m2m_dev->m2m_ops->job_ready && (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) { @@ -291,6 +274,7 @@ void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, list_del(&m2m_dev->curr_ctx->queue); m2m_dev->curr_ctx->job_flags &= ~(TRANS_QUEUED | TRANS_RUNNING); + wake_up(&m2m_dev->curr_ctx->finished); m2m_dev->curr_ctx = NULL; spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); @@ -309,10 +293,10 @@ EXPORT_SYMBOL(v4l2_m2m_job_finish); int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_requestbuffers *reqbufs) { - struct videobuf_queue *vq; + struct vb2_queue *vq; vq = v4l2_m2m_get_vq(m2m_ctx, reqbufs->type); - return videobuf_reqbufs(vq, reqbufs); + return vb2_reqbufs(vq, reqbufs); } EXPORT_SYMBOL_GPL(v4l2_m2m_reqbufs); @@ -324,15 +308,22 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_reqbufs); int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf) { - struct videobuf_queue *vq; - int ret; + struct vb2_queue *vq; + int ret = 0; + unsigned int i; vq = v4l2_m2m_get_vq(m2m_ctx, buf->type); - ret = videobuf_querybuf(vq, buf); - - if (buf->memory == V4L2_MEMORY_MMAP - && vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - buf->m.offset += DST_QUEUE_OFF_BASE; + ret = vb2_querybuf(vq, buf); + + /* Adjust MMAP memory offsets for the CAPTURE queue */ + if (buf->memory == V4L2_MEMORY_MMAP && !V4L2_TYPE_IS_OUTPUT(vq->type)) { + if (V4L2_TYPE_IS_MULTIPLANAR(vq->type)) { + for (i = 0; i < buf->length; ++i) + buf->m.planes[i].m.mem_offset + += DST_QUEUE_OFF_BASE; + } else { + buf->m.offset += DST_QUEUE_OFF_BASE; + } } return ret; @@ -346,11 +337,11 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_querybuf); int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf) { - struct videobuf_queue *vq; + struct vb2_queue *vq; int ret; vq = v4l2_m2m_get_vq(m2m_ctx, buf->type); - ret = videobuf_qbuf(vq, buf); + ret = vb2_qbuf(vq, buf); if (!ret) v4l2_m2m_try_schedule(m2m_ctx); @@ -365,10 +356,10 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_qbuf); int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct v4l2_buffer *buf) { - struct videobuf_queue *vq; + struct vb2_queue *vq; vq = v4l2_m2m_get_vq(m2m_ctx, buf->type); - return videobuf_dqbuf(vq, buf, file->f_flags & O_NONBLOCK); + return vb2_dqbuf(vq, buf, file->f_flags & O_NONBLOCK); } EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf); @@ -378,11 +369,11 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_dqbuf); int v4l2_m2m_streamon(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) { - struct videobuf_queue *vq; + struct vb2_queue *vq; int ret; vq = v4l2_m2m_get_vq(m2m_ctx, type); - ret = videobuf_streamon(vq); + ret = vb2_streamon(vq, type); if (!ret) v4l2_m2m_try_schedule(m2m_ctx); @@ -396,10 +387,10 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_streamon); int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, enum v4l2_buf_type type) { - struct videobuf_queue *vq; + struct vb2_queue *vq; vq = v4l2_m2m_get_vq(m2m_ctx, type); - return videobuf_streamoff(vq); + return vb2_streamoff(vq, type); } EXPORT_SYMBOL_GPL(v4l2_m2m_streamoff); @@ -414,44 +405,53 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_streamoff); unsigned int v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct poll_table_struct *wait) { - struct videobuf_queue *src_q, *dst_q; - struct videobuf_buffer *src_vb = NULL, *dst_vb = NULL; + struct vb2_queue *src_q, *dst_q; + struct vb2_buffer *src_vb = NULL, *dst_vb = NULL; unsigned int rc = 0; + unsigned long flags; src_q = v4l2_m2m_get_src_vq(m2m_ctx); dst_q = v4l2_m2m_get_dst_vq(m2m_ctx); - videobuf_queue_lock(src_q); - videobuf_queue_lock(dst_q); - - if (src_q->streaming && !list_empty(&src_q->stream)) - src_vb = list_first_entry(&src_q->stream, - struct videobuf_buffer, stream); - if (dst_q->streaming && !list_empty(&dst_q->stream)) - dst_vb = list_first_entry(&dst_q->stream, - struct videobuf_buffer, stream); - - if (!src_vb && !dst_vb) { + /* + * There has to be at least one buffer queued on each queued_list, which + * means either in driver already or waiting for driver to claim it + * and start processing. + */ + if ((!src_q->streaming || list_empty(&src_q->queued_list)) + && (!dst_q->streaming || list_empty(&dst_q->queued_list))) { rc = POLLERR; goto end; } - if (src_vb) { - poll_wait(file, &src_vb->done, wait); - if (src_vb->state == VIDEOBUF_DONE - || src_vb->state == VIDEOBUF_ERROR) - rc |= POLLOUT | POLLWRNORM; - } - if (dst_vb) { - poll_wait(file, &dst_vb->done, wait); - if (dst_vb->state == VIDEOBUF_DONE - || dst_vb->state == VIDEOBUF_ERROR) - rc |= POLLIN | POLLRDNORM; - } + if (m2m_ctx->m2m_dev->m2m_ops->unlock) + m2m_ctx->m2m_dev->m2m_ops->unlock(m2m_ctx->priv); + + poll_wait(file, &src_q->done_wq, wait); + poll_wait(file, &dst_q->done_wq, wait); + + if (m2m_ctx->m2m_dev->m2m_ops->lock) + m2m_ctx->m2m_dev->m2m_ops->lock(m2m_ctx->priv); + + spin_lock_irqsave(&src_q->done_lock, flags); + if (!list_empty(&src_q->done_list)) + src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer, + done_entry); + if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE + || src_vb->state == VB2_BUF_STATE_ERROR)) + rc |= POLLOUT | POLLWRNORM; + spin_unlock_irqrestore(&src_q->done_lock, flags); + + spin_lock_irqsave(&dst_q->done_lock, flags); + if (!list_empty(&dst_q->done_list)) + dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer, + done_entry); + if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE + || dst_vb->state == VB2_BUF_STATE_ERROR)) + rc |= POLLIN | POLLRDNORM; + spin_unlock_irqrestore(&dst_q->done_lock, flags); end: - videobuf_queue_unlock(dst_q); - videobuf_queue_unlock(src_q); return rc; } EXPORT_SYMBOL_GPL(v4l2_m2m_poll); @@ -470,7 +470,7 @@ int v4l2_m2m_mmap(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, struct vm_area_struct *vma) { unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - struct videobuf_queue *vq; + struct vb2_queue *vq; if (offset < DST_QUEUE_OFF_BASE) { vq = v4l2_m2m_get_src_vq(m2m_ctx); @@ -479,7 +479,7 @@ int v4l2_m2m_mmap(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT); } - return videobuf_mmap_mapper(vq, vma); + return vb2_mmap(vq, vma); } EXPORT_SYMBOL(v4l2_m2m_mmap); @@ -531,36 +531,41 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_release); * * Usually called from driver's open() function. */ -struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(void *priv, struct v4l2_m2m_dev *m2m_dev, - void (*vq_init)(void *priv, struct videobuf_queue *, - enum v4l2_buf_type)) +struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, + void *drv_priv, + int (*queue_init)(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)) { struct v4l2_m2m_ctx *m2m_ctx; struct v4l2_m2m_queue_ctx *out_q_ctx, *cap_q_ctx; - - if (!vq_init) - return ERR_PTR(-EINVAL); + int ret; m2m_ctx = kzalloc(sizeof *m2m_ctx, GFP_KERNEL); if (!m2m_ctx) return ERR_PTR(-ENOMEM); - m2m_ctx->priv = priv; + m2m_ctx->priv = drv_priv; m2m_ctx->m2m_dev = m2m_dev; + init_waitqueue_head(&m2m_ctx->finished); - out_q_ctx = get_queue_ctx(m2m_ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT); - cap_q_ctx = get_queue_ctx(m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); + out_q_ctx = &m2m_ctx->out_q_ctx; + cap_q_ctx = &m2m_ctx->cap_q_ctx; INIT_LIST_HEAD(&out_q_ctx->rdy_queue); INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); + spin_lock_init(&out_q_ctx->rdy_spinlock); + spin_lock_init(&cap_q_ctx->rdy_spinlock); INIT_LIST_HEAD(&m2m_ctx->queue); - vq_init(priv, &out_q_ctx->q, V4L2_BUF_TYPE_VIDEO_OUTPUT); - vq_init(priv, &cap_q_ctx->q, V4L2_BUF_TYPE_VIDEO_CAPTURE); - out_q_ctx->q.priv_data = cap_q_ctx->q.priv_data = priv; + ret = queue_init(drv_priv, &out_q_ctx->q, &cap_q_ctx->q); + + if (ret) + goto err; return m2m_ctx; +err: + kfree(m2m_ctx); + return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(v4l2_m2m_ctx_init); @@ -572,7 +577,6 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_ctx_init); void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx) { struct v4l2_m2m_dev *m2m_dev; - struct videobuf_buffer *vb; unsigned long flags; m2m_dev = m2m_ctx->m2m_dev; @@ -582,10 +586,7 @@ void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx) spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); m2m_dev->m2m_ops->job_abort(m2m_ctx->priv); dprintk("m2m_ctx %p running, will wait to complete", m2m_ctx); - vb = v4l2_m2m_next_dst_buf(m2m_ctx); - BUG_ON(NULL == vb); - wait_event(vb->done, vb->state != VIDEOBUF_ACTIVE - && vb->state != VIDEOBUF_QUEUED); + wait_event(m2m_ctx->finished, !(m2m_ctx->job_flags & TRANS_RUNNING)); } else if (m2m_ctx->job_flags & TRANS_QUEUED) { list_del(&m2m_ctx->queue); m2m_ctx->job_flags &= ~(TRANS_QUEUED | TRANS_RUNNING); @@ -597,11 +598,8 @@ void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx) spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); } - videobuf_stop(&m2m_ctx->cap_q_ctx.q); - videobuf_stop(&m2m_ctx->out_q_ctx.q); - - videobuf_mmap_free(&m2m_ctx->cap_q_ctx.q); - videobuf_mmap_free(&m2m_ctx->out_q_ctx.q); + vb2_queue_release(&m2m_ctx->cap_q_ctx.q); + vb2_queue_release(&m2m_ctx->out_q_ctx.q); kfree(m2m_ctx); } @@ -611,23 +609,21 @@ EXPORT_SYMBOL_GPL(v4l2_m2m_ctx_release); * v4l2_m2m_buf_queue() - add a buffer to the proper ready buffers list. * * Call from buf_queue(), videobuf_queue_ops callback. - * - * Locking: Caller holds q->irqlock (taken by videobuf before calling buf_queue - * callback in the driver). */ -void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct videobuf_queue *vq, - struct videobuf_buffer *vb) +void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb) { + struct v4l2_m2m_buffer *b = container_of(vb, struct v4l2_m2m_buffer, vb); struct v4l2_m2m_queue_ctx *q_ctx; + unsigned long flags; - q_ctx = get_queue_ctx(m2m_ctx, vq->type); + q_ctx = get_queue_ctx(m2m_ctx, vb->vb2_queue->type); if (!q_ctx) return; - list_add_tail(&vb->queue, &q_ctx->rdy_queue); + spin_lock_irqsave(&q_ctx->rdy_spinlock, flags); + list_add_tail(&b->list, &q_ctx->rdy_queue); q_ctx->num_rdy++; - - vb->state = VIDEOBUF_QUEUED; + spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); } EXPORT_SYMBOL_GPL(v4l2_m2m_buf_queue); diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c new file mode 100644 index 000000000000..0b8064490676 --- /dev/null +++ b/drivers/media/video/v4l2-subdev.c @@ -0,0 +1,332 @@ +/* + * V4L2 sub-device + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/ioctl.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-event.h> + +static int subdev_fh_init(struct v4l2_subdev_fh *fh, struct v4l2_subdev *sd) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + /* Allocate try format and crop in the same memory block */ + fh->try_fmt = kzalloc((sizeof(*fh->try_fmt) + sizeof(*fh->try_crop)) + * sd->entity.num_pads, GFP_KERNEL); + if (fh->try_fmt == NULL) + return -ENOMEM; + + fh->try_crop = (struct v4l2_rect *) + (fh->try_fmt + sd->entity.num_pads); +#endif + return 0; +} + +static void subdev_fh_free(struct v4l2_subdev_fh *fh) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + kfree(fh->try_fmt); + fh->try_fmt = NULL; + fh->try_crop = NULL; +#endif +} + +static int subdev_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_subdev *sd = vdev_to_v4l2_subdev(vdev); + struct v4l2_subdev_fh *subdev_fh; +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity *entity = NULL; +#endif + int ret; + + subdev_fh = kzalloc(sizeof(*subdev_fh), GFP_KERNEL); + if (subdev_fh == NULL) + return -ENOMEM; + + ret = subdev_fh_init(subdev_fh, sd); + if (ret) { + kfree(subdev_fh); + return ret; + } + + ret = v4l2_fh_init(&subdev_fh->vfh, vdev); + if (ret) + goto err; + + if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) { + ret = v4l2_event_init(&subdev_fh->vfh); + if (ret) + goto err; + + ret = v4l2_event_alloc(&subdev_fh->vfh, sd->nevents); + if (ret) + goto err; + } + + v4l2_fh_add(&subdev_fh->vfh); + file->private_data = &subdev_fh->vfh; +#if defined(CONFIG_MEDIA_CONTROLLER) + if (sd->v4l2_dev->mdev) { + entity = media_entity_get(&sd->entity); + if (!entity) { + ret = -EBUSY; + goto err; + } + } +#endif + + if (sd->internal_ops && sd->internal_ops->open) { + ret = sd->internal_ops->open(sd, subdev_fh); + if (ret < 0) + goto err; + } + + return 0; + +err: +#if defined(CONFIG_MEDIA_CONTROLLER) + if (entity) + media_entity_put(entity); +#endif + v4l2_fh_del(&subdev_fh->vfh); + v4l2_fh_exit(&subdev_fh->vfh); + subdev_fh_free(subdev_fh); + kfree(subdev_fh); + + return ret; +} + +static int subdev_close(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_subdev *sd = vdev_to_v4l2_subdev(vdev); + struct v4l2_fh *vfh = file->private_data; + struct v4l2_subdev_fh *subdev_fh = to_v4l2_subdev_fh(vfh); + + if (sd->internal_ops && sd->internal_ops->close) + sd->internal_ops->close(sd, subdev_fh); +#if defined(CONFIG_MEDIA_CONTROLLER) + if (sd->v4l2_dev->mdev) + media_entity_put(&sd->entity); +#endif + v4l2_fh_del(vfh); + v4l2_fh_exit(vfh); + subdev_fh_free(subdev_fh); + kfree(subdev_fh); + file->private_data = NULL; + + return 0; +} + +static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_subdev *sd = vdev_to_v4l2_subdev(vdev); + struct v4l2_fh *vfh = file->private_data; +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + struct v4l2_subdev_fh *subdev_fh = to_v4l2_subdev_fh(vfh); +#endif + + switch (cmd) { + case VIDIOC_QUERYCTRL: + return v4l2_subdev_queryctrl(sd, arg); + + case VIDIOC_QUERYMENU: + return v4l2_subdev_querymenu(sd, arg); + + case VIDIOC_G_CTRL: + return v4l2_subdev_g_ctrl(sd, arg); + + case VIDIOC_S_CTRL: + return v4l2_subdev_s_ctrl(sd, arg); + + case VIDIOC_G_EXT_CTRLS: + return v4l2_subdev_g_ext_ctrls(sd, arg); + + case VIDIOC_S_EXT_CTRLS: + return v4l2_subdev_s_ext_ctrls(sd, arg); + + case VIDIOC_TRY_EXT_CTRLS: + return v4l2_subdev_try_ext_ctrls(sd, arg); + + case VIDIOC_DQEVENT: + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) + return -ENOIOCTLCMD; + + return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); + + case VIDIOC_SUBSCRIBE_EVENT: + return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); + + case VIDIOC_UNSUBSCRIBE_EVENT: + return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + case VIDIOC_SUBDEV_G_FMT: { + struct v4l2_subdev_format *format = arg; + + if (format->which != V4L2_SUBDEV_FORMAT_TRY && + format->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + if (format->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, get_fmt, subdev_fh, format); + } + + case VIDIOC_SUBDEV_S_FMT: { + struct v4l2_subdev_format *format = arg; + + if (format->which != V4L2_SUBDEV_FORMAT_TRY && + format->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + if (format->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, set_fmt, subdev_fh, format); + } + + case VIDIOC_SUBDEV_G_CROP: { + struct v4l2_subdev_crop *crop = arg; + + if (crop->which != V4L2_SUBDEV_FORMAT_TRY && + crop->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + if (crop->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, get_crop, subdev_fh, crop); + } + + case VIDIOC_SUBDEV_S_CROP: { + struct v4l2_subdev_crop *crop = arg; + + if (crop->which != V4L2_SUBDEV_FORMAT_TRY && + crop->which != V4L2_SUBDEV_FORMAT_ACTIVE) + return -EINVAL; + + if (crop->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, set_crop, subdev_fh, crop); + } + + case VIDIOC_SUBDEV_ENUM_MBUS_CODE: { + struct v4l2_subdev_mbus_code_enum *code = arg; + + if (code->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, enum_mbus_code, subdev_fh, + code); + } + + case VIDIOC_SUBDEV_ENUM_FRAME_SIZE: { + struct v4l2_subdev_frame_size_enum *fse = arg; + + if (fse->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, enum_frame_size, subdev_fh, + fse); + } + + case VIDIOC_SUBDEV_G_FRAME_INTERVAL: + return v4l2_subdev_call(sd, video, g_frame_interval, arg); + + case VIDIOC_SUBDEV_S_FRAME_INTERVAL: + return v4l2_subdev_call(sd, video, s_frame_interval, arg); + + case VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL: { + struct v4l2_subdev_frame_interval_enum *fie = arg; + + if (fie->pad >= sd->entity.num_pads) + return -EINVAL; + + return v4l2_subdev_call(sd, pad, enum_frame_interval, subdev_fh, + fie); + } +#endif + default: + return v4l2_subdev_call(sd, core, ioctl, cmd, arg); + } + + return 0; +} + +static long subdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + return video_usercopy(file, cmd, arg, subdev_do_ioctl); +} + +static unsigned int subdev_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_subdev *sd = vdev_to_v4l2_subdev(vdev); + struct v4l2_fh *fh = file->private_data; + + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) + return POLLERR; + + poll_wait(file, &fh->events->wait, wait); + + if (v4l2_event_pending(fh)) + return POLLPRI; + + return 0; +} + +const struct v4l2_file_operations v4l2_subdev_fops = { + .owner = THIS_MODULE, + .open = subdev_open, + .unlocked_ioctl = subdev_ioctl, + .release = subdev_close, + .poll = subdev_poll, +}; + +void v4l2_subdev_init(struct v4l2_subdev *sd, const struct v4l2_subdev_ops *ops) +{ + INIT_LIST_HEAD(&sd->list); + BUG_ON(!ops); + sd->ops = ops; + sd->v4l2_dev = NULL; + sd->flags = 0; + sd->name[0] = '\0'; + sd->grp_id = 0; + sd->dev_priv = NULL; + sd->host_priv = NULL; +#if defined(CONFIG_MEDIA_CONTROLLER) + sd->entity.name = sd->name; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; +#endif +} +EXPORT_SYMBOL(v4l2_subdev_init); diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index 2f973cd56408..8c780c2d937b 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -25,6 +25,7 @@ #include <linux/via-core.h> #include <linux/via-gpio.h> #include <linux/via_i2c.h> +#include <asm/olpc.h> #include "via-camera.h" @@ -38,14 +39,12 @@ MODULE_PARM_DESC(flip_image, "If set, the sensor will be instructed to flip the image " "vertically."); -#ifdef CONFIG_OLPC_XO_1_5 static int override_serial; module_param(override_serial, bool, 0444); MODULE_PARM_DESC(override_serial, "The camera driver will normally refuse to load if " "the XO 1.5 serial port is enabled. Set this option " - "to force the issue."); -#endif + "to force-enable the camera."); /* * Basic window sizes. @@ -1246,6 +1245,62 @@ static const struct v4l2_ioctl_ops viacam_ioctl_ops = { /* * Power management. */ +#ifdef CONFIG_PM + +static int viacam_suspend(void *priv) +{ + struct via_camera *cam = priv; + enum viacam_opstate state = cam->opstate; + + if (cam->opstate != S_IDLE) { + viacam_stop_engine(cam); + cam->opstate = state; /* So resume restarts */ + } + + return 0; +} + +static int viacam_resume(void *priv) +{ + struct via_camera *cam = priv; + int ret = 0; + + /* + * Get back to a reasonable operating state. + */ + via_write_reg_mask(VIASR, 0x78, 0, 0x80); + via_write_reg_mask(VIASR, 0x1e, 0xc0, 0xc0); + viacam_int_disable(cam); + set_bit(CF_CONFIG_NEEDED, &cam->flags); + /* + * Make sure the sensor's power state is correct + */ + if (cam->users > 0) + via_sensor_power_up(cam); + else + via_sensor_power_down(cam); + /* + * If it was operating, try to restart it. + */ + if (cam->opstate != S_IDLE) { + mutex_lock(&cam->lock); + ret = viacam_configure_sensor(cam); + if (!ret) + ret = viacam_config_controller(cam); + mutex_unlock(&cam->lock); + if (!ret) + viacam_start_engine(cam); + } + + return ret; +} + +static struct viafb_pm_hooks viacam_pm_hooks = { + .suspend = viacam_suspend, + .resume = viacam_resume +}; + +#endif /* CONFIG_PM */ /* * Setup stuff. @@ -1261,6 +1316,37 @@ static struct video_device viacam_v4l_template = { .release = video_device_release_empty, /* Check this */ }; +/* + * The OLPC folks put the serial port on the same pin as + * the camera. They also get grumpy if we break the + * serial port and keep them from using it. So we have + * to check the serial enable bit and not step on it. + */ +#define VIACAM_SERIAL_DEVFN 0x88 +#define VIACAM_SERIAL_CREG 0x46 +#define VIACAM_SERIAL_BIT 0x40 + +static __devinit bool viacam_serial_is_enabled(void) +{ + struct pci_bus *pbus = pci_find_bus(0, 0); + u8 cbyte; + + pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN, + VIACAM_SERIAL_CREG, &cbyte); + if ((cbyte & VIACAM_SERIAL_BIT) == 0) + return false; /* Not enabled */ + if (override_serial == 0) { + printk(KERN_NOTICE "Via camera: serial port is enabled, " \ + "refusing to load.\n"); + printk(KERN_NOTICE "Specify override_serial=1 to force " \ + "module loading.\n"); + return true; + } + printk(KERN_NOTICE "Via camera: overriding serial port\n"); + pci_bus_write_config_byte(pbus, VIACAM_SERIAL_DEVFN, + VIACAM_SERIAL_CREG, cbyte & ~VIACAM_SERIAL_BIT); + return false; +} static __devinit int viacam_probe(struct platform_device *pdev) { @@ -1292,6 +1378,10 @@ static __devinit int viacam_probe(struct platform_device *pdev) printk(KERN_ERR "viacam: No I/O memory, so no pictures\n"); return -ENOMEM; } + + if (machine_is_olpc() && viacam_serial_is_enabled()) + return -EBUSY; + /* * Basic structure initialization. */ @@ -1369,6 +1459,14 @@ static __devinit int viacam_probe(struct platform_device *pdev) goto out_irq; video_set_drvdata(&cam->vdev, cam); +#ifdef CONFIG_PM + /* + * Hook into PM events + */ + viacam_pm_hooks.private = cam; + viafb_pm_register(&viacam_pm_hooks); +#endif + /* Power the sensor down until somebody opens the device */ via_sensor_power_down(cam); return 0; @@ -1395,7 +1493,6 @@ static __devexit int viacam_remove(struct platform_device *pdev) return 0; } - static struct platform_driver viacam_driver = { .driver = { .name = "viafb-camera", @@ -1404,50 +1501,8 @@ static struct platform_driver viacam_driver = { .remove = viacam_remove, }; - -#ifdef CONFIG_OLPC_XO_1_5 -/* - * The OLPC folks put the serial port on the same pin as - * the camera. They also get grumpy if we break the - * serial port and keep them from using it. So we have - * to check the serial enable bit and not step on it. - */ -#define VIACAM_SERIAL_DEVFN 0x88 -#define VIACAM_SERIAL_CREG 0x46 -#define VIACAM_SERIAL_BIT 0x40 - -static __devinit int viacam_check_serial_port(void) -{ - struct pci_bus *pbus = pci_find_bus(0, 0); - u8 cbyte; - - pci_bus_read_config_byte(pbus, VIACAM_SERIAL_DEVFN, - VIACAM_SERIAL_CREG, &cbyte); - if ((cbyte & VIACAM_SERIAL_BIT) == 0) - return 0; /* Not enabled */ - if (override_serial == 0) { - printk(KERN_NOTICE "Via camera: serial port is enabled, " \ - "refusing to load.\n"); - printk(KERN_NOTICE "Specify override_serial=1 to force " \ - "module loading.\n"); - return -EBUSY; - } - printk(KERN_NOTICE "Via camera: overriding serial port\n"); - pci_bus_write_config_byte(pbus, VIACAM_SERIAL_DEVFN, - VIACAM_SERIAL_CREG, cbyte & ~VIACAM_SERIAL_BIT); - return 0; -} -#endif - - - - static int viacam_init(void) { -#ifdef CONFIG_OLPC_XO_1_5 - if (viacam_check_serial_port()) - return -EBUSY; -#endif return platform_driver_register(&viacam_driver); } module_init(viacam_init); diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index c9691115f2d2..c4742fc15529 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -300,7 +300,7 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); retval = remap_pfn_range(vma, vma->vm_start, - mem->dma_handle >> PAGE_SHIFT, + PFN_DOWN(virt_to_phys(mem->vaddr)), size, vma->vm_page_prot); if (retval) { dev_err(q->dev, "mmap: remap failed with error %d. ", retval); diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c new file mode 100644 index 000000000000..6698c77e0f64 --- /dev/null +++ b/drivers/media/video/videobuf2-core.c @@ -0,0 +1,1819 @@ +/* + * videobuf2-core.c - V4L2 driver helper framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/sched.h> + +#include <media/videobuf2-core.h> + +static int debug; +module_param(debug, int, 0644); + +#define dprintk(level, fmt, arg...) \ + do { \ + if (debug >= level) \ + printk(KERN_DEBUG "vb2: " fmt, ## arg); \ + } while (0) + +#define call_memop(q, plane, op, args...) \ + (((q)->mem_ops->op) ? \ + ((q)->mem_ops->op(args)) : 0) + +#define call_qop(q, op, args...) \ + (((q)->ops->op) ? ((q)->ops->op(args)) : 0) + +/** + * __vb2_buf_mem_alloc() - allocate video memory for the given buffer + */ +static int __vb2_buf_mem_alloc(struct vb2_buffer *vb, + unsigned long *plane_sizes) +{ + struct vb2_queue *q = vb->vb2_queue; + void *mem_priv; + int plane; + + /* Allocate memory for all planes in this buffer */ + for (plane = 0; plane < vb->num_planes; ++plane) { + mem_priv = call_memop(q, plane, alloc, q->alloc_ctx[plane], + plane_sizes[plane]); + if (!mem_priv) + goto free; + + /* Associate allocator private data with this plane */ + vb->planes[plane].mem_priv = mem_priv; + vb->v4l2_planes[plane].length = plane_sizes[plane]; + } + + return 0; +free: + /* Free already allocated memory if one of the allocations failed */ + for (; plane > 0; --plane) + call_memop(q, plane, put, vb->planes[plane - 1].mem_priv); + + return -ENOMEM; +} + +/** + * __vb2_buf_mem_free() - free memory of the given buffer + */ +static void __vb2_buf_mem_free(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned int plane; + + for (plane = 0; plane < vb->num_planes; ++plane) { + call_memop(q, plane, put, vb->planes[plane].mem_priv); + vb->planes[plane].mem_priv = NULL; + dprintk(3, "Freed plane %d of buffer %d\n", + plane, vb->v4l2_buf.index); + } +} + +/** + * __vb2_buf_userptr_put() - release userspace memory associated with + * a USERPTR buffer + */ +static void __vb2_buf_userptr_put(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned int plane; + + for (plane = 0; plane < vb->num_planes; ++plane) { + void *mem_priv = vb->planes[plane].mem_priv; + + if (mem_priv) { + call_memop(q, plane, put_userptr, mem_priv); + vb->planes[plane].mem_priv = NULL; + } + } +} + +/** + * __setup_offsets() - setup unique offsets ("cookies") for every plane in + * every buffer on the queue + */ +static void __setup_offsets(struct vb2_queue *q) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + unsigned long off = 0; + + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + for (plane = 0; plane < vb->num_planes; ++plane) { + vb->v4l2_planes[plane].m.mem_offset = off; + + dprintk(3, "Buffer %d, plane %d offset 0x%08lx\n", + buffer, plane, off); + + off += vb->v4l2_planes[plane].length; + off = PAGE_ALIGN(off); + } + } +} + +/** + * __vb2_queue_alloc() - allocate videobuf buffer structures and (for MMAP type) + * video buffer memory for all buffers/planes on the queue and initializes the + * queue + * + * Returns the number of buffers successfully allocated. + */ +static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory memory, + unsigned int num_buffers, unsigned int num_planes, + unsigned long plane_sizes[]) +{ + unsigned int buffer; + struct vb2_buffer *vb; + int ret; + + for (buffer = 0; buffer < num_buffers; ++buffer) { + /* Allocate videobuf buffer structures */ + vb = kzalloc(q->buf_struct_size, GFP_KERNEL); + if (!vb) { + dprintk(1, "Memory alloc for buffer struct failed\n"); + break; + } + + /* Length stores number of planes for multiplanar buffers */ + if (V4L2_TYPE_IS_MULTIPLANAR(q->type)) + vb->v4l2_buf.length = num_planes; + + vb->state = VB2_BUF_STATE_DEQUEUED; + vb->vb2_queue = q; + vb->num_planes = num_planes; + vb->v4l2_buf.index = buffer; + vb->v4l2_buf.type = q->type; + vb->v4l2_buf.memory = memory; + + /* Allocate video buffer memory for the MMAP type */ + if (memory == V4L2_MEMORY_MMAP) { + ret = __vb2_buf_mem_alloc(vb, plane_sizes); + if (ret) { + dprintk(1, "Failed allocating memory for " + "buffer %d\n", buffer); + kfree(vb); + break; + } + /* + * Call the driver-provided buffer initialization + * callback, if given. An error in initialization + * results in queue setup failure. + */ + ret = call_qop(q, buf_init, vb); + if (ret) { + dprintk(1, "Buffer %d %p initialization" + " failed\n", buffer, vb); + __vb2_buf_mem_free(vb); + kfree(vb); + break; + } + } + + q->bufs[buffer] = vb; + } + + q->num_buffers = buffer; + + __setup_offsets(q); + + dprintk(1, "Allocated %d buffers, %d plane(s) each\n", + q->num_buffers, num_planes); + + return buffer; +} + +/** + * __vb2_free_mem() - release all video buffer memory for a given queue + */ +static void __vb2_free_mem(struct vb2_queue *q) +{ + unsigned int buffer; + struct vb2_buffer *vb; + + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + vb = q->bufs[buffer]; + if (!vb) + continue; + + /* Free MMAP buffers or release USERPTR buffers */ + if (q->memory == V4L2_MEMORY_MMAP) + __vb2_buf_mem_free(vb); + else + __vb2_buf_userptr_put(vb); + } +} + +/** + * __vb2_queue_free() - free the queue - video memory and related information + * and return the queue to an uninitialized state. Might be called even if the + * queue has already been freed. + */ +static void __vb2_queue_free(struct vb2_queue *q) +{ + unsigned int buffer; + + /* Call driver-provided cleanup function for each buffer, if provided */ + if (q->ops->buf_cleanup) { + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + if (NULL == q->bufs[buffer]) + continue; + q->ops->buf_cleanup(q->bufs[buffer]); + } + } + + /* Release video buffer memory */ + __vb2_free_mem(q); + + /* Free videobuf buffers */ + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + kfree(q->bufs[buffer]); + q->bufs[buffer] = NULL; + } + + q->num_buffers = 0; + q->memory = 0; +} + +/** + * __verify_planes_array() - verify that the planes array passed in struct + * v4l2_buffer from userspace can be safely used + */ +static int __verify_planes_array(struct vb2_buffer *vb, struct v4l2_buffer *b) +{ + /* Is memory for copying plane information present? */ + if (NULL == b->m.planes) { + dprintk(1, "Multi-planar buffer passed but " + "planes array not provided\n"); + return -EINVAL; + } + + if (b->length < vb->num_planes || b->length > VIDEO_MAX_PLANES) { + dprintk(1, "Incorrect planes array length, " + "expected %d, got %d\n", vb->num_planes, b->length); + return -EINVAL; + } + + return 0; +} + +/** + * __fill_v4l2_buffer() - fill in a struct v4l2_buffer with information to be + * returned to userspace + */ +static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) +{ + struct vb2_queue *q = vb->vb2_queue; + int ret = 0; + + /* Copy back data such as timestamp, input, etc. */ + memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m)); + b->input = vb->v4l2_buf.input; + b->reserved = vb->v4l2_buf.reserved; + + if (V4L2_TYPE_IS_MULTIPLANAR(q->type)) { + ret = __verify_planes_array(vb, b); + if (ret) + return ret; + + /* + * Fill in plane-related data if userspace provided an array + * for it. The memory and size is verified above. + */ + memcpy(b->m.planes, vb->v4l2_planes, + b->length * sizeof(struct v4l2_plane)); + } else { + /* + * We use length and offset in v4l2_planes array even for + * single-planar buffers, but userspace does not. + */ + b->length = vb->v4l2_planes[0].length; + b->bytesused = vb->v4l2_planes[0].bytesused; + if (q->memory == V4L2_MEMORY_MMAP) + b->m.offset = vb->v4l2_planes[0].m.mem_offset; + else if (q->memory == V4L2_MEMORY_USERPTR) + b->m.userptr = vb->v4l2_planes[0].m.userptr; + } + + b->flags = 0; + + switch (vb->state) { + case VB2_BUF_STATE_QUEUED: + case VB2_BUF_STATE_ACTIVE: + b->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case VB2_BUF_STATE_ERROR: + b->flags |= V4L2_BUF_FLAG_ERROR; + /* fall through */ + case VB2_BUF_STATE_DONE: + b->flags |= V4L2_BUF_FLAG_DONE; + break; + case VB2_BUF_STATE_DEQUEUED: + /* nothing */ + break; + } + + if (vb->num_planes_mapped == vb->num_planes) + b->flags |= V4L2_BUF_FLAG_MAPPED; + + return ret; +} + +/** + * vb2_querybuf() - query video buffer information + * @q: videobuf queue + * @b: buffer struct passed from userspace to vidioc_querybuf handler + * in driver + * + * Should be called from vidioc_querybuf ioctl handler in driver. + * This function will verify the passed v4l2_buffer structure and fill the + * relevant information for the userspace. + * + * The return values from this function are intended to be directly returned + * from vidioc_querybuf handler in driver. + */ +int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b) +{ + struct vb2_buffer *vb; + + if (b->type != q->type) { + dprintk(1, "querybuf: wrong buffer type\n"); + return -EINVAL; + } + + if (b->index >= q->num_buffers) { + dprintk(1, "querybuf: buffer index out of range\n"); + return -EINVAL; + } + vb = q->bufs[b->index]; + + return __fill_v4l2_buffer(vb, b); +} +EXPORT_SYMBOL(vb2_querybuf); + +/** + * __verify_userptr_ops() - verify that all memory operations required for + * USERPTR queue type have been provided + */ +static int __verify_userptr_ops(struct vb2_queue *q) +{ + if (!(q->io_modes & VB2_USERPTR) || !q->mem_ops->get_userptr || + !q->mem_ops->put_userptr) + return -EINVAL; + + return 0; +} + +/** + * __verify_mmap_ops() - verify that all memory operations required for + * MMAP queue type have been provided + */ +static int __verify_mmap_ops(struct vb2_queue *q) +{ + if (!(q->io_modes & VB2_MMAP) || !q->mem_ops->alloc || + !q->mem_ops->put || !q->mem_ops->mmap) + return -EINVAL; + + return 0; +} + +/** + * __buffers_in_use() - return true if any buffers on the queue are in use and + * the queue cannot be freed (by the means of REQBUFS(0)) call + */ +static bool __buffers_in_use(struct vb2_queue *q) +{ + unsigned int buffer, plane; + struct vb2_buffer *vb; + + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + vb = q->bufs[buffer]; + for (plane = 0; plane < vb->num_planes; ++plane) { + /* + * If num_users() has not been provided, call_memop + * will return 0, apparently nobody cares about this + * case anyway. If num_users() returns more than 1, + * we are not the only user of the plane's memory. + */ + if (call_memop(q, plane, num_users, + vb->planes[plane].mem_priv) > 1) + return true; + } + } + + return false; +} + +/** + * vb2_reqbufs() - Initiate streaming + * @q: videobuf2 queue + * @req: struct passed from userspace to vidioc_reqbufs handler in driver + * + * Should be called from vidioc_reqbufs ioctl handler of a driver. + * This function: + * 1) verifies streaming parameters passed from the userspace, + * 2) sets up the queue, + * 3) negotiates number of buffers and planes per buffer with the driver + * to be used during streaming, + * 4) allocates internal buffer structures (struct vb2_buffer), according to + * the agreed parameters, + * 5) for MMAP memory type, allocates actual video memory, using the + * memory handling/allocation routines provided during queue initialization + * + * If req->count is 0, all the memory will be freed instead. + * If the queue has been allocated previously (by a previous vb2_reqbufs) call + * and the queue is not busy, memory will be reallocated. + * + * The return values from this function are intended to be directly returned + * from vidioc_reqbufs handler in driver. + */ +int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) +{ + unsigned int num_buffers, num_planes; + unsigned long plane_sizes[VIDEO_MAX_PLANES]; + int ret = 0; + + if (q->fileio) { + dprintk(1, "reqbufs: file io in progress\n"); + return -EBUSY; + } + + if (req->memory != V4L2_MEMORY_MMAP + && req->memory != V4L2_MEMORY_USERPTR) { + dprintk(1, "reqbufs: unsupported memory type\n"); + return -EINVAL; + } + + if (req->type != q->type) { + dprintk(1, "reqbufs: requested type is incorrect\n"); + return -EINVAL; + } + + if (q->streaming) { + dprintk(1, "reqbufs: streaming active\n"); + return -EBUSY; + } + + /* + * Make sure all the required memory ops for given memory type + * are available. + */ + if (req->memory == V4L2_MEMORY_MMAP && __verify_mmap_ops(q)) { + dprintk(1, "reqbufs: MMAP for current setup unsupported\n"); + return -EINVAL; + } + + if (req->memory == V4L2_MEMORY_USERPTR && __verify_userptr_ops(q)) { + dprintk(1, "reqbufs: USERPTR for current setup unsupported\n"); + return -EINVAL; + } + + /* + * If the same number of buffers and memory access method is requested + * then return immediately. + */ + if (q->memory == req->memory && req->count == q->num_buffers) + return 0; + + if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) { + /* + * We already have buffers allocated, so first check if they + * are not in use and can be freed. + */ + if (q->memory == V4L2_MEMORY_MMAP && __buffers_in_use(q)) { + dprintk(1, "reqbufs: memory in use, cannot free\n"); + return -EBUSY; + } + + __vb2_queue_free(q); + + /* + * In case of REQBUFS(0) return immediately without calling + * driver's queue_setup() callback and allocating resources. + */ + if (req->count == 0) + return 0; + } + + /* + * Make sure the requested values and current defaults are sane. + */ + num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME); + memset(plane_sizes, 0, sizeof(plane_sizes)); + memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx)); + + /* + * Ask the driver how many buffers and planes per buffer it requires. + * Driver also sets the size and allocator context for each plane. + */ + ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes, + plane_sizes, q->alloc_ctx); + if (ret) + return ret; + + /* Finally, allocate buffers and video memory */ + ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes, + plane_sizes); + if (ret < 0) { + dprintk(1, "Memory allocation failed with error: %d\n", ret); + return ret; + } + + /* + * Check if driver can handle the allocated number of buffers. + */ + if (ret < num_buffers) { + unsigned int orig_num_buffers; + + orig_num_buffers = num_buffers = ret; + ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes, + plane_sizes, q->alloc_ctx); + if (ret) + goto free_mem; + + if (orig_num_buffers < num_buffers) { + ret = -ENOMEM; + goto free_mem; + } + + /* + * Ok, driver accepted smaller number of buffers. + */ + ret = num_buffers; + } + + q->memory = req->memory; + + /* + * Return the number of successfully allocated buffers + * to the userspace. + */ + req->count = ret; + + return 0; + +free_mem: + __vb2_queue_free(q); + return ret; +} +EXPORT_SYMBOL_GPL(vb2_reqbufs); + +/** + * vb2_plane_vaddr() - Return a kernel virtual address of a given plane + * @vb: vb2_buffer to which the plane in question belongs to + * @plane_no: plane number for which the address is to be returned + * + * This function returns a kernel virtual address of a given plane if + * such a mapping exist, NULL otherwise. + */ +void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no) +{ + struct vb2_queue *q = vb->vb2_queue; + + if (plane_no > vb->num_planes) + return NULL; + + return call_memop(q, plane_no, vaddr, vb->planes[plane_no].mem_priv); + +} +EXPORT_SYMBOL_GPL(vb2_plane_vaddr); + +/** + * vb2_plane_cookie() - Return allocator specific cookie for the given plane + * @vb: vb2_buffer to which the plane in question belongs to + * @plane_no: plane number for which the cookie is to be returned + * + * This function returns an allocator specific cookie for a given plane if + * available, NULL otherwise. The allocator should provide some simple static + * inline function, which would convert this cookie to the allocator specific + * type that can be used directly by the driver to access the buffer. This can + * be for example physical address, pointer to scatter list or IOMMU mapping. + */ +void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no) +{ + struct vb2_queue *q = vb->vb2_queue; + + if (plane_no > vb->num_planes) + return NULL; + + return call_memop(q, plane_no, cookie, vb->planes[plane_no].mem_priv); +} +EXPORT_SYMBOL_GPL(vb2_plane_cookie); + +/** + * vb2_buffer_done() - inform videobuf that an operation on a buffer is finished + * @vb: vb2_buffer returned from the driver + * @state: either VB2_BUF_STATE_DONE if the operation finished successfully + * or VB2_BUF_STATE_ERROR if the operation finished with an error + * + * This function should be called by the driver after a hardware operation on + * a buffer is finished and the buffer may be returned to userspace. The driver + * cannot use this buffer anymore until it is queued back to it by videobuf + * by the means of buf_queue callback. Only buffers previously queued to the + * driver by buf_queue can be passed to this function. + */ +void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state) +{ + struct vb2_queue *q = vb->vb2_queue; + unsigned long flags; + + if (vb->state != VB2_BUF_STATE_ACTIVE) + return; + + if (state != VB2_BUF_STATE_DONE && state != VB2_BUF_STATE_ERROR) + return; + + dprintk(4, "Done processing on buffer %d, state: %d\n", + vb->v4l2_buf.index, vb->state); + + /* Add the buffer to the done buffers list */ + spin_lock_irqsave(&q->done_lock, flags); + vb->state = state; + list_add_tail(&vb->done_entry, &q->done_list); + atomic_dec(&q->queued_count); + spin_unlock_irqrestore(&q->done_lock, flags); + + /* Inform any processes that may be waiting for buffers */ + wake_up(&q->done_wq); +} +EXPORT_SYMBOL_GPL(vb2_buffer_done); + +/** + * __fill_vb2_buffer() - fill a vb2_buffer with information provided in + * a v4l2_buffer by the userspace + */ +static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b, + struct v4l2_plane *v4l2_planes) +{ + unsigned int plane; + int ret; + + if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { + /* + * Verify that the userspace gave us a valid array for + * plane information. + */ + ret = __verify_planes_array(vb, b); + if (ret) + return ret; + + /* Fill in driver-provided information for OUTPUT types */ + if (V4L2_TYPE_IS_OUTPUT(b->type)) { + /* + * Will have to go up to b->length when API starts + * accepting variable number of planes. + */ + for (plane = 0; plane < vb->num_planes; ++plane) { + v4l2_planes[plane].bytesused = + b->m.planes[plane].bytesused; + v4l2_planes[plane].data_offset = + b->m.planes[plane].data_offset; + } + } + + if (b->memory == V4L2_MEMORY_USERPTR) { + for (plane = 0; plane < vb->num_planes; ++plane) { + v4l2_planes[plane].m.userptr = + b->m.planes[plane].m.userptr; + v4l2_planes[plane].length = + b->m.planes[plane].length; + } + } + } else { + /* + * Single-planar buffers do not use planes array, + * so fill in relevant v4l2_buffer struct fields instead. + * In videobuf we use our internal V4l2_planes struct for + * single-planar buffers as well, for simplicity. + */ + if (V4L2_TYPE_IS_OUTPUT(b->type)) + v4l2_planes[0].bytesused = b->bytesused; + + if (b->memory == V4L2_MEMORY_USERPTR) { + v4l2_planes[0].m.userptr = b->m.userptr; + v4l2_planes[0].length = b->length; + } + } + + vb->v4l2_buf.field = b->field; + vb->v4l2_buf.timestamp = b->timestamp; + + return 0; +} + +/** + * __qbuf_userptr() - handle qbuf of a USERPTR buffer + */ +static int __qbuf_userptr(struct vb2_buffer *vb, struct v4l2_buffer *b) +{ + struct v4l2_plane planes[VIDEO_MAX_PLANES]; + struct vb2_queue *q = vb->vb2_queue; + void *mem_priv; + unsigned int plane; + int ret; + int write = !V4L2_TYPE_IS_OUTPUT(q->type); + + /* Verify and copy relevant information provided by the userspace */ + ret = __fill_vb2_buffer(vb, b, planes); + if (ret) + return ret; + + for (plane = 0; plane < vb->num_planes; ++plane) { + /* Skip the plane if already verified */ + if (vb->v4l2_planes[plane].m.userptr == planes[plane].m.userptr + && vb->v4l2_planes[plane].length == planes[plane].length) + continue; + + dprintk(3, "qbuf: userspace address for plane %d changed, " + "reacquiring memory\n", plane); + + /* Release previously acquired memory if present */ + if (vb->planes[plane].mem_priv) + call_memop(q, plane, put_userptr, + vb->planes[plane].mem_priv); + + vb->planes[plane].mem_priv = NULL; + + /* Acquire each plane's memory */ + if (q->mem_ops->get_userptr) { + mem_priv = q->mem_ops->get_userptr(q->alloc_ctx[plane], + planes[plane].m.userptr, + planes[plane].length, + write); + if (IS_ERR(mem_priv)) { + dprintk(1, "qbuf: failed acquiring userspace " + "memory for plane %d\n", plane); + ret = PTR_ERR(mem_priv); + goto err; + } + vb->planes[plane].mem_priv = mem_priv; + } + } + + /* + * Call driver-specific initialization on the newly acquired buffer, + * if provided. + */ + ret = call_qop(q, buf_init, vb); + if (ret) { + dprintk(1, "qbuf: buffer initialization failed\n"); + goto err; + } + + /* + * Now that everything is in order, copy relevant information + * provided by userspace. + */ + for (plane = 0; plane < vb->num_planes; ++plane) + vb->v4l2_planes[plane] = planes[plane]; + + return 0; +err: + /* In case of errors, release planes that were already acquired */ + for (; plane > 0; --plane) { + call_memop(q, plane, put_userptr, + vb->planes[plane - 1].mem_priv); + vb->planes[plane - 1].mem_priv = NULL; + } + + return ret; +} + +/** + * __qbuf_mmap() - handle qbuf of an MMAP buffer + */ +static int __qbuf_mmap(struct vb2_buffer *vb, struct v4l2_buffer *b) +{ + return __fill_vb2_buffer(vb, b, vb->v4l2_planes); +} + +/** + * __enqueue_in_driver() - enqueue a vb2_buffer in driver for processing + */ +static void __enqueue_in_driver(struct vb2_buffer *vb) +{ + struct vb2_queue *q = vb->vb2_queue; + + vb->state = VB2_BUF_STATE_ACTIVE; + atomic_inc(&q->queued_count); + q->ops->buf_queue(vb); +} + +/** + * vb2_qbuf() - Queue a buffer from userspace + * @q: videobuf2 queue + * @b: buffer structure passed from userspace to vidioc_qbuf handler + * in driver + * + * Should be called from vidioc_qbuf ioctl handler of a driver. + * This function: + * 1) verifies the passed buffer, + * 2) calls buf_prepare callback in the driver (if provided), in which + * driver-specific buffer initialization can be performed, + * 3) if streaming is on, queues the buffer in driver by the means of buf_queue + * callback for processing. + * + * The return values from this function are intended to be directly returned + * from vidioc_qbuf handler in driver. + */ +int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b) +{ + struct vb2_buffer *vb; + int ret = 0; + + if (q->fileio) { + dprintk(1, "qbuf: file io in progress\n"); + return -EBUSY; + } + + if (b->type != q->type) { + dprintk(1, "qbuf: invalid buffer type\n"); + return -EINVAL; + } + + if (b->index >= q->num_buffers) { + dprintk(1, "qbuf: buffer index out of range\n"); + return -EINVAL; + } + + vb = q->bufs[b->index]; + if (NULL == vb) { + /* Should never happen */ + dprintk(1, "qbuf: buffer is NULL\n"); + return -EINVAL; + } + + if (b->memory != q->memory) { + dprintk(1, "qbuf: invalid memory type\n"); + return -EINVAL; + } + + if (vb->state != VB2_BUF_STATE_DEQUEUED) { + dprintk(1, "qbuf: buffer already in use\n"); + return -EINVAL; + } + + if (q->memory == V4L2_MEMORY_MMAP) + ret = __qbuf_mmap(vb, b); + else if (q->memory == V4L2_MEMORY_USERPTR) + ret = __qbuf_userptr(vb, b); + else { + WARN(1, "Invalid queue type\n"); + return -EINVAL; + } + + if (ret) + return ret; + + ret = call_qop(q, buf_prepare, vb); + if (ret) { + dprintk(1, "qbuf: buffer preparation failed\n"); + return ret; + } + + /* + * Add to the queued buffers list, a buffer will stay on it until + * dequeued in dqbuf. + */ + list_add_tail(&vb->queued_entry, &q->queued_list); + vb->state = VB2_BUF_STATE_QUEUED; + + /* + * If already streaming, give the buffer to driver for processing. + * If not, the buffer will be given to driver on next streamon. + */ + if (q->streaming) + __enqueue_in_driver(vb); + + dprintk(1, "qbuf of buffer %d succeeded\n", vb->v4l2_buf.index); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_qbuf); + +/** + * __vb2_wait_for_done_vb() - wait for a buffer to become available + * for dequeuing + * + * Will sleep if required for nonblocking == false. + */ +static int __vb2_wait_for_done_vb(struct vb2_queue *q, int nonblocking) +{ + /* + * All operations on vb_done_list are performed under done_lock + * spinlock protection. However, buffers may be removed from + * it and returned to userspace only while holding both driver's + * lock and the done_lock spinlock. Thus we can be sure that as + * long as we hold the driver's lock, the list will remain not + * empty if list_empty() check succeeds. + */ + + for (;;) { + int ret; + + if (!q->streaming) { + dprintk(1, "Streaming off, will not wait for buffers\n"); + return -EINVAL; + } + + if (!list_empty(&q->done_list)) { + /* + * Found a buffer that we were waiting for. + */ + break; + } + + if (nonblocking) { + dprintk(1, "Nonblocking and no buffers to dequeue, " + "will not wait\n"); + return -EAGAIN; + } + + /* + * We are streaming and blocking, wait for another buffer to + * become ready or for streamoff. Driver's lock is released to + * allow streamoff or qbuf to be called while waiting. + */ + call_qop(q, wait_prepare, q); + + /* + * All locks have been released, it is safe to sleep now. + */ + dprintk(3, "Will sleep waiting for buffers\n"); + ret = wait_event_interruptible(q->done_wq, + !list_empty(&q->done_list) || !q->streaming); + + /* + * We need to reevaluate both conditions again after reacquiring + * the locks or return an error if one occurred. + */ + call_qop(q, wait_finish, q); + if (ret) + return ret; + } + return 0; +} + +/** + * __vb2_get_done_vb() - get a buffer ready for dequeuing + * + * Will sleep if required for nonblocking == false. + */ +static int __vb2_get_done_vb(struct vb2_queue *q, struct vb2_buffer **vb, + int nonblocking) +{ + unsigned long flags; + int ret; + + /* + * Wait for at least one buffer to become available on the done_list. + */ + ret = __vb2_wait_for_done_vb(q, nonblocking); + if (ret) + return ret; + + /* + * Driver's lock has been held since we last verified that done_list + * is not empty, so no need for another list_empty(done_list) check. + */ + spin_lock_irqsave(&q->done_lock, flags); + *vb = list_first_entry(&q->done_list, struct vb2_buffer, done_entry); + list_del(&(*vb)->done_entry); + spin_unlock_irqrestore(&q->done_lock, flags); + + return 0; +} + +/** + * vb2_wait_for_all_buffers() - wait until all buffers are given back to vb2 + * @q: videobuf2 queue + * + * This function will wait until all buffers that have been given to the driver + * by buf_queue() are given back to vb2 with vb2_buffer_done(). It doesn't call + * wait_prepare, wait_finish pair. It is intended to be called with all locks + * taken, for example from stop_streaming() callback. + */ +int vb2_wait_for_all_buffers(struct vb2_queue *q) +{ + if (!q->streaming) { + dprintk(1, "Streaming off, will not wait for buffers\n"); + return -EINVAL; + } + + wait_event(q->done_wq, !atomic_read(&q->queued_count)); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_wait_for_all_buffers); + +/** + * vb2_dqbuf() - Dequeue a buffer to the userspace + * @q: videobuf2 queue + * @b: buffer structure passed from userspace to vidioc_dqbuf handler + * in driver + * @nonblocking: if true, this call will not sleep waiting for a buffer if no + * buffers ready for dequeuing are present. Normally the driver + * would be passing (file->f_flags & O_NONBLOCK) here + * + * Should be called from vidioc_dqbuf ioctl handler of a driver. + * This function: + * 1) verifies the passed buffer, + * 2) calls buf_finish callback in the driver (if provided), in which + * driver can perform any additional operations that may be required before + * returning the buffer to userspace, such as cache sync, + * 3) the buffer struct members are filled with relevant information for + * the userspace. + * + * The return values from this function are intended to be directly returned + * from vidioc_dqbuf handler in driver. + */ +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) +{ + struct vb2_buffer *vb = NULL; + int ret; + + if (q->fileio) { + dprintk(1, "dqbuf: file io in progress\n"); + return -EBUSY; + } + + if (b->type != q->type) { + dprintk(1, "dqbuf: invalid buffer type\n"); + return -EINVAL; + } + + ret = __vb2_get_done_vb(q, &vb, nonblocking); + if (ret < 0) { + dprintk(1, "dqbuf: error getting next done buffer\n"); + return ret; + } + + ret = call_qop(q, buf_finish, vb); + if (ret) { + dprintk(1, "dqbuf: buffer finish failed\n"); + return ret; + } + + switch (vb->state) { + case VB2_BUF_STATE_DONE: + dprintk(3, "dqbuf: Returning done buffer\n"); + break; + case VB2_BUF_STATE_ERROR: + dprintk(3, "dqbuf: Returning done buffer with errors\n"); + break; + default: + dprintk(1, "dqbuf: Invalid buffer state\n"); + return -EINVAL; + } + + /* Fill buffer information for the userspace */ + __fill_v4l2_buffer(vb, b); + /* Remove from videobuf queue */ + list_del(&vb->queued_entry); + + dprintk(1, "dqbuf of buffer %d, with state %d\n", + vb->v4l2_buf.index, vb->state); + + vb->state = VB2_BUF_STATE_DEQUEUED; + return 0; +} +EXPORT_SYMBOL_GPL(vb2_dqbuf); + +/** + * vb2_streamon - start streaming + * @q: videobuf2 queue + * @type: type argument passed from userspace to vidioc_streamon handler + * + * Should be called from vidioc_streamon handler of a driver. + * This function: + * 1) verifies current state + * 2) starts streaming and passes any previously queued buffers to the driver + * + * The return values from this function are intended to be directly returned + * from vidioc_streamon handler in the driver. + */ +int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type) +{ + struct vb2_buffer *vb; + int ret; + + if (q->fileio) { + dprintk(1, "streamon: file io in progress\n"); + return -EBUSY; + } + + if (type != q->type) { + dprintk(1, "streamon: invalid stream type\n"); + return -EINVAL; + } + + if (q->streaming) { + dprintk(1, "streamon: already streaming\n"); + return -EBUSY; + } + + /* + * Cannot start streaming on an OUTPUT device if no buffers have + * been queued yet. + */ + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + if (list_empty(&q->queued_list)) { + dprintk(1, "streamon: no output buffers queued\n"); + return -EINVAL; + } + } + + /* + * Let driver notice that streaming state has been enabled. + */ + ret = call_qop(q, start_streaming, q); + if (ret) { + dprintk(1, "streamon: driver refused to start streaming\n"); + return ret; + } + + q->streaming = 1; + + /* + * If any buffers were queued before streamon, + * we can now pass them to driver for processing. + */ + list_for_each_entry(vb, &q->queued_list, queued_entry) + __enqueue_in_driver(vb); + + dprintk(3, "Streamon successful\n"); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_streamon); + +/** + * __vb2_queue_cancel() - cancel and stop (pause) streaming + * + * Removes all queued buffers from driver's queue and all buffers queued by + * userspace from videobuf's queue. Returns to state after reqbufs. + */ +static void __vb2_queue_cancel(struct vb2_queue *q) +{ + unsigned int i; + + /* + * Tell driver to stop all transactions and release all queued + * buffers. + */ + if (q->streaming) + call_qop(q, stop_streaming, q); + q->streaming = 0; + + /* + * Remove all buffers from videobuf's list... + */ + INIT_LIST_HEAD(&q->queued_list); + /* + * ...and done list; userspace will not receive any buffers it + * has not already dequeued before initiating cancel. + */ + INIT_LIST_HEAD(&q->done_list); + wake_up_all(&q->done_wq); + + /* + * Reinitialize all buffers for next use. + */ + for (i = 0; i < q->num_buffers; ++i) + q->bufs[i]->state = VB2_BUF_STATE_DEQUEUED; +} + +/** + * vb2_streamoff - stop streaming + * @q: videobuf2 queue + * @type: type argument passed from userspace to vidioc_streamoff handler + * + * Should be called from vidioc_streamoff handler of a driver. + * This function: + * 1) verifies current state, + * 2) stop streaming and dequeues any queued buffers, including those previously + * passed to the driver (after waiting for the driver to finish). + * + * This call can be used for pausing playback. + * The return values from this function are intended to be directly returned + * from vidioc_streamoff handler in the driver + */ +int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type) +{ + if (q->fileio) { + dprintk(1, "streamoff: file io in progress\n"); + return -EBUSY; + } + + if (type != q->type) { + dprintk(1, "streamoff: invalid stream type\n"); + return -EINVAL; + } + + if (!q->streaming) { + dprintk(1, "streamoff: not streaming\n"); + return -EINVAL; + } + + /* + * Cancel will pause streaming and remove all buffers from the driver + * and videobuf, effectively returning control over them to userspace. + */ + __vb2_queue_cancel(q); + + dprintk(3, "Streamoff successful\n"); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_streamoff); + +/** + * __find_plane_by_offset() - find plane associated with the given offset off + */ +static int __find_plane_by_offset(struct vb2_queue *q, unsigned long off, + unsigned int *_buffer, unsigned int *_plane) +{ + struct vb2_buffer *vb; + unsigned int buffer, plane; + + /* + * Go over all buffers and their planes, comparing the given offset + * with an offset assigned to each plane. If a match is found, + * return its buffer and plane numbers. + */ + for (buffer = 0; buffer < q->num_buffers; ++buffer) { + vb = q->bufs[buffer]; + + for (plane = 0; plane < vb->num_planes; ++plane) { + if (vb->v4l2_planes[plane].m.mem_offset == off) { + *_buffer = buffer; + *_plane = plane; + return 0; + } + } + } + + return -EINVAL; +} + +/** + * vb2_mmap() - map video buffers into application address space + * @q: videobuf2 queue + * @vma: vma passed to the mmap file operation handler in the driver + * + * Should be called from mmap file operation handler of a driver. + * This function maps one plane of one of the available video buffers to + * userspace. To map whole video memory allocated on reqbufs, this function + * has to be called once per each plane per each buffer previously allocated. + * + * When the userspace application calls mmap, it passes to it an offset returned + * to it earlier by the means of vidioc_querybuf handler. That offset acts as + * a "cookie", which is then used to identify the plane to be mapped. + * This function finds a plane with a matching offset and a mapping is performed + * by the means of a provided memory operation. + * + * The return values from this function are intended to be directly returned + * from the mmap handler in driver. + */ +int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma) +{ + unsigned long off = vma->vm_pgoff << PAGE_SHIFT; + struct vb2_plane *vb_plane; + struct vb2_buffer *vb; + unsigned int buffer, plane; + int ret; + + if (q->memory != V4L2_MEMORY_MMAP) { + dprintk(1, "Queue is not currently set up for mmap\n"); + return -EINVAL; + } + + /* + * Check memory area access mode. + */ + if (!(vma->vm_flags & VM_SHARED)) { + dprintk(1, "Invalid vma flags, VM_SHARED needed\n"); + return -EINVAL; + } + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + if (!(vma->vm_flags & VM_WRITE)) { + dprintk(1, "Invalid vma flags, VM_WRITE needed\n"); + return -EINVAL; + } + } else { + if (!(vma->vm_flags & VM_READ)) { + dprintk(1, "Invalid vma flags, VM_READ needed\n"); + return -EINVAL; + } + } + + /* + * Find the plane corresponding to the offset passed by userspace. + */ + ret = __find_plane_by_offset(q, off, &buffer, &plane); + if (ret) + return ret; + + vb = q->bufs[buffer]; + vb_plane = &vb->planes[plane]; + + ret = q->mem_ops->mmap(vb_plane->mem_priv, vma); + if (ret) + return ret; + + vb_plane->mapped = 1; + vb->num_planes_mapped++; + + dprintk(3, "Buffer %d, plane %d successfully mapped\n", buffer, plane); + return 0; +} +EXPORT_SYMBOL_GPL(vb2_mmap); + +static int __vb2_init_fileio(struct vb2_queue *q, int read); +static int __vb2_cleanup_fileio(struct vb2_queue *q); + +/** + * vb2_poll() - implements poll userspace operation + * @q: videobuf2 queue + * @file: file argument passed to the poll file operation handler + * @wait: wait argument passed to the poll file operation handler + * + * This function implements poll file operation handler for a driver. + * For CAPTURE queues, if a buffer is ready to be dequeued, the userspace will + * be informed that the file descriptor of a video device is available for + * reading. + * For OUTPUT queues, if a buffer is ready to be dequeued, the file descriptor + * will be reported as available for writing. + * + * The return values from this function are intended to be directly returned + * from poll handler in driver. + */ +unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait) +{ + unsigned long flags; + unsigned int ret; + struct vb2_buffer *vb = NULL; + + /* + * Start file I/O emulator only if streaming API has not been used yet. + */ + if (q->num_buffers == 0 && q->fileio == NULL) { + if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ)) { + ret = __vb2_init_fileio(q, 1); + if (ret) + return POLLERR; + } + if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE)) { + ret = __vb2_init_fileio(q, 0); + if (ret) + return POLLERR; + /* + * Write to OUTPUT queue can be done immediately. + */ + return POLLOUT | POLLWRNORM; + } + } + + /* + * There is nothing to wait for if no buffers have already been queued. + */ + if (list_empty(&q->queued_list)) + return POLLERR; + + poll_wait(file, &q->done_wq, wait); + + /* + * Take first buffer available for dequeuing. + */ + spin_lock_irqsave(&q->done_lock, flags); + if (!list_empty(&q->done_list)) + vb = list_first_entry(&q->done_list, struct vb2_buffer, + done_entry); + spin_unlock_irqrestore(&q->done_lock, flags); + + if (vb && (vb->state == VB2_BUF_STATE_DONE + || vb->state == VB2_BUF_STATE_ERROR)) { + return (V4L2_TYPE_IS_OUTPUT(q->type)) ? POLLOUT | POLLWRNORM : + POLLIN | POLLRDNORM; + } + return 0; +} +EXPORT_SYMBOL_GPL(vb2_poll); + +/** + * vb2_queue_init() - initialize a videobuf2 queue + * @q: videobuf2 queue; this structure should be allocated in driver + * + * The vb2_queue structure should be allocated by the driver. The driver is + * responsible of clearing it's content and setting initial values for some + * required entries before calling this function. + * q->ops, q->mem_ops, q->type and q->io_modes are mandatory. Please refer + * to the struct vb2_queue description in include/media/videobuf2-core.h + * for more information. + */ +int vb2_queue_init(struct vb2_queue *q) +{ + BUG_ON(!q); + BUG_ON(!q->ops); + BUG_ON(!q->mem_ops); + BUG_ON(!q->type); + BUG_ON(!q->io_modes); + + BUG_ON(!q->ops->queue_setup); + BUG_ON(!q->ops->buf_queue); + + INIT_LIST_HEAD(&q->queued_list); + INIT_LIST_HEAD(&q->done_list); + spin_lock_init(&q->done_lock); + init_waitqueue_head(&q->done_wq); + + if (q->buf_struct_size == 0) + q->buf_struct_size = sizeof(struct vb2_buffer); + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_queue_init); + +/** + * vb2_queue_release() - stop streaming, release the queue and free memory + * @q: videobuf2 queue + * + * This function stops streaming and performs necessary clean ups, including + * freeing video buffer memory. The driver is responsible for freeing + * the vb2_queue structure itself. + */ +void vb2_queue_release(struct vb2_queue *q) +{ + __vb2_cleanup_fileio(q); + __vb2_queue_cancel(q); + __vb2_queue_free(q); +} +EXPORT_SYMBOL_GPL(vb2_queue_release); + +/** + * struct vb2_fileio_buf - buffer context used by file io emulator + * + * vb2 provides a compatibility layer and emulator of file io (read and + * write) calls on top of streaming API. This structure is used for + * tracking context related to the buffers. + */ +struct vb2_fileio_buf { + void *vaddr; + unsigned int size; + unsigned int pos; + unsigned int queued:1; +}; + +/** + * struct vb2_fileio_data - queue context used by file io emulator + * + * vb2 provides a compatibility layer and emulator of file io (read and + * write) calls on top of streaming API. For proper operation it required + * this structure to save the driver state between each call of the read + * or write function. + */ +struct vb2_fileio_data { + struct v4l2_requestbuffers req; + struct v4l2_buffer b; + struct vb2_fileio_buf bufs[VIDEO_MAX_FRAME]; + unsigned int index; + unsigned int q_count; + unsigned int dq_count; + unsigned int flags; +}; + +/** + * __vb2_init_fileio() - initialize file io emulator + * @q: videobuf2 queue + * @read: mode selector (1 means read, 0 means write) + */ +static int __vb2_init_fileio(struct vb2_queue *q, int read) +{ + struct vb2_fileio_data *fileio; + int i, ret; + unsigned int count = 0; + + /* + * Sanity check + */ + if ((read && !(q->io_modes & VB2_READ)) || + (!read && !(q->io_modes & VB2_WRITE))) + BUG(); + + /* + * Check if device supports mapping buffers to kernel virtual space. + */ + if (!q->mem_ops->vaddr) + return -EBUSY; + + /* + * Check if streaming api has not been already activated. + */ + if (q->streaming || q->num_buffers > 0) + return -EBUSY; + + /* + * Start with count 1, driver can increase it in queue_setup() + */ + count = 1; + + dprintk(3, "setting up file io: mode %s, count %d, flags %08x\n", + (read) ? "read" : "write", count, q->io_flags); + + fileio = kzalloc(sizeof(struct vb2_fileio_data), GFP_KERNEL); + if (fileio == NULL) + return -ENOMEM; + + fileio->flags = q->io_flags; + + /* + * Request buffers and use MMAP type to force driver + * to allocate buffers by itself. + */ + fileio->req.count = count; + fileio->req.memory = V4L2_MEMORY_MMAP; + fileio->req.type = q->type; + ret = vb2_reqbufs(q, &fileio->req); + if (ret) + goto err_kfree; + + /* + * Check if plane_count is correct + * (multiplane buffers are not supported). + */ + if (q->bufs[0]->num_planes != 1) { + fileio->req.count = 0; + ret = -EBUSY; + goto err_reqbufs; + } + + /* + * Get kernel address of each buffer. + */ + for (i = 0; i < q->num_buffers; i++) { + fileio->bufs[i].vaddr = vb2_plane_vaddr(q->bufs[i], 0); + if (fileio->bufs[i].vaddr == NULL) + goto err_reqbufs; + fileio->bufs[i].size = vb2_plane_size(q->bufs[i], 0); + } + + /* + * Read mode requires pre queuing of all buffers. + */ + if (read) { + /* + * Queue all buffers. + */ + for (i = 0; i < q->num_buffers; i++) { + struct v4l2_buffer *b = &fileio->b; + memset(b, 0, sizeof(*b)); + b->type = q->type; + b->memory = q->memory; + b->index = i; + ret = vb2_qbuf(q, b); + if (ret) + goto err_reqbufs; + fileio->bufs[i].queued = 1; + } + + /* + * Start streaming. + */ + ret = vb2_streamon(q, q->type); + if (ret) + goto err_reqbufs; + } + + q->fileio = fileio; + + return ret; + +err_reqbufs: + vb2_reqbufs(q, &fileio->req); + +err_kfree: + kfree(fileio); + return ret; +} + +/** + * __vb2_cleanup_fileio() - free resourced used by file io emulator + * @q: videobuf2 queue + */ +static int __vb2_cleanup_fileio(struct vb2_queue *q) +{ + struct vb2_fileio_data *fileio = q->fileio; + + if (fileio) { + /* + * Hack fileio context to enable direct calls to vb2 ioctl + * interface. + */ + q->fileio = NULL; + + vb2_streamoff(q, q->type); + fileio->req.count = 0; + vb2_reqbufs(q, &fileio->req); + kfree(fileio); + dprintk(3, "file io emulator closed\n"); + } + return 0; +} + +/** + * __vb2_perform_fileio() - perform a single file io (read or write) operation + * @q: videobuf2 queue + * @data: pointed to target userspace buffer + * @count: number of bytes to read or write + * @ppos: file handle position tracking pointer + * @nonblock: mode selector (1 means blocking calls, 0 means nonblocking) + * @read: access mode selector (1 means read, 0 means write) + */ +static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblock, int read) +{ + struct vb2_fileio_data *fileio; + struct vb2_fileio_buf *buf; + int ret, index; + + dprintk(3, "file io: mode %s, offset %ld, count %zd, %sblocking\n", + read ? "read" : "write", (long)*ppos, count, + nonblock ? "non" : ""); + + if (!data) + return -EINVAL; + + /* + * Initialize emulator on first call. + */ + if (!q->fileio) { + ret = __vb2_init_fileio(q, read); + dprintk(3, "file io: vb2_init_fileio result: %d\n", ret); + if (ret) + return ret; + } + fileio = q->fileio; + + /* + * Hack fileio context to enable direct calls to vb2 ioctl interface. + * The pointer will be restored before returning from this function. + */ + q->fileio = NULL; + + index = fileio->index; + buf = &fileio->bufs[index]; + + /* + * Check if we need to dequeue the buffer. + */ + if (buf->queued) { + struct vb2_buffer *vb; + + /* + * Call vb2_dqbuf to get buffer back. + */ + memset(&fileio->b, 0, sizeof(fileio->b)); + fileio->b.type = q->type; + fileio->b.memory = q->memory; + fileio->b.index = index; + ret = vb2_dqbuf(q, &fileio->b, nonblock); + dprintk(5, "file io: vb2_dqbuf result: %d\n", ret); + if (ret) + goto end; + fileio->dq_count += 1; + + /* + * Get number of bytes filled by the driver + */ + vb = q->bufs[index]; + buf->size = vb2_get_plane_payload(vb, 0); + buf->queued = 0; + } + + /* + * Limit count on last few bytes of the buffer. + */ + if (buf->pos + count > buf->size) { + count = buf->size - buf->pos; + dprintk(5, "reducing read count: %zd\n", count); + } + + /* + * Transfer data to userspace. + */ + dprintk(3, "file io: copying %zd bytes - buffer %d, offset %u\n", + count, index, buf->pos); + if (read) + ret = copy_to_user(data, buf->vaddr + buf->pos, count); + else + ret = copy_from_user(buf->vaddr + buf->pos, data, count); + if (ret) { + dprintk(3, "file io: error copying data\n"); + ret = -EFAULT; + goto end; + } + + /* + * Update counters. + */ + buf->pos += count; + *ppos += count; + + /* + * Queue next buffer if required. + */ + if (buf->pos == buf->size || + (!read && (fileio->flags & VB2_FILEIO_WRITE_IMMEDIATELY))) { + /* + * Check if this is the last buffer to read. + */ + if (read && (fileio->flags & VB2_FILEIO_READ_ONCE) && + fileio->dq_count == 1) { + dprintk(3, "file io: read limit reached\n"); + /* + * Restore fileio pointer and release the context. + */ + q->fileio = fileio; + return __vb2_cleanup_fileio(q); + } + + /* + * Call vb2_qbuf and give buffer to the driver. + */ + memset(&fileio->b, 0, sizeof(fileio->b)); + fileio->b.type = q->type; + fileio->b.memory = q->memory; + fileio->b.index = index; + fileio->b.bytesused = buf->pos; + ret = vb2_qbuf(q, &fileio->b); + dprintk(5, "file io: vb2_dbuf result: %d\n", ret); + if (ret) + goto end; + + /* + * Buffer has been queued, update the status + */ + buf->pos = 0; + buf->queued = 1; + buf->size = q->bufs[0]->v4l2_planes[0].length; + fileio->q_count += 1; + + /* + * Switch to the next buffer + */ + fileio->index = (index + 1) % q->num_buffers; + + /* + * Start streaming if required. + */ + if (!read && !q->streaming) { + ret = vb2_streamon(q, q->type); + if (ret) + goto end; + } + } + + /* + * Return proper number of bytes processed. + */ + if (ret == 0) + ret = count; +end: + /* + * Restore the fileio context and block vb2 ioctl interface. + */ + q->fileio = fileio; + return ret; +} + +size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblocking) +{ + return __vb2_perform_fileio(q, data, count, ppos, nonblocking, 1); +} +EXPORT_SYMBOL_GPL(vb2_read); + +size_t vb2_write(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblocking) +{ + return __vb2_perform_fileio(q, data, count, ppos, nonblocking, 0); +} +EXPORT_SYMBOL_GPL(vb2_write); + +MODULE_DESCRIPTION("Driver helper framework for Video for Linux 2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>, Marek Szyprowski"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/video/videobuf2-dma-contig.c new file mode 100644 index 000000000000..58205d596138 --- /dev/null +++ b/drivers/media/video/videobuf2-dma-contig.c @@ -0,0 +1,185 @@ +/* + * videobuf2-dma-contig.c - DMA contig memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> + +#include <media/videobuf2-core.h> +#include <media/videobuf2-memops.h> + +struct vb2_dc_conf { + struct device *dev; +}; + +struct vb2_dc_buf { + struct vb2_dc_conf *conf; + void *vaddr; + dma_addr_t paddr; + unsigned long size; + struct vm_area_struct *vma; + atomic_t refcount; + struct vb2_vmarea_handler handler; +}; + +static void vb2_dma_contig_put(void *buf_priv); + +static void *vb2_dma_contig_alloc(void *alloc_ctx, unsigned long size) +{ + struct vb2_dc_conf *conf = alloc_ctx; + struct vb2_dc_buf *buf; + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->vaddr = dma_alloc_coherent(conf->dev, size, &buf->paddr, + GFP_KERNEL); + if (!buf->vaddr) { + dev_err(conf->dev, "dma_alloc_coherent of size %ld failed\n", + buf->size); + kfree(buf); + return ERR_PTR(-ENOMEM); + } + + buf->conf = conf; + buf->size = size; + + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_dma_contig_put; + buf->handler.arg = buf; + + atomic_inc(&buf->refcount); + + return buf; +} + +static void vb2_dma_contig_put(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + if (atomic_dec_and_test(&buf->refcount)) { + dma_free_coherent(buf->conf->dev, buf->size, buf->vaddr, + buf->paddr); + kfree(buf); + } +} + +static void *vb2_dma_contig_cookie(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + return &buf->paddr; +} + +static void *vb2_dma_contig_vaddr(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + if (!buf) + return 0; + + return buf->vaddr; +} + +static unsigned int vb2_dma_contig_num_users(void *buf_priv) +{ + struct vb2_dc_buf *buf = buf_priv; + + return atomic_read(&buf->refcount); +} + +static int vb2_dma_contig_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_dc_buf *buf = buf_priv; + + if (!buf) { + printk(KERN_ERR "No buffer to map\n"); + return -EINVAL; + } + + return vb2_mmap_pfn_range(vma, buf->paddr, buf->size, + &vb2_common_vm_ops, &buf->handler); +} + +static void *vb2_dma_contig_get_userptr(void *alloc_ctx, unsigned long vaddr, + unsigned long size, int write) +{ + struct vb2_dc_buf *buf; + struct vm_area_struct *vma; + dma_addr_t paddr = 0; + int ret; + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + ret = vb2_get_contig_userptr(vaddr, size, &vma, &paddr); + if (ret) { + printk(KERN_ERR "Failed acquiring VMA for vaddr 0x%08lx\n", + vaddr); + kfree(buf); + return ERR_PTR(ret); + } + + buf->size = size; + buf->paddr = paddr; + buf->vma = vma; + + return buf; +} + +static void vb2_dma_contig_put_userptr(void *mem_priv) +{ + struct vb2_dc_buf *buf = mem_priv; + + if (!buf) + return; + + vb2_put_vma(buf->vma); + kfree(buf); +} + +const struct vb2_mem_ops vb2_dma_contig_memops = { + .alloc = vb2_dma_contig_alloc, + .put = vb2_dma_contig_put, + .cookie = vb2_dma_contig_cookie, + .vaddr = vb2_dma_contig_vaddr, + .mmap = vb2_dma_contig_mmap, + .get_userptr = vb2_dma_contig_get_userptr, + .put_userptr = vb2_dma_contig_put_userptr, + .num_users = vb2_dma_contig_num_users, +}; +EXPORT_SYMBOL_GPL(vb2_dma_contig_memops); + +void *vb2_dma_contig_init_ctx(struct device *dev) +{ + struct vb2_dc_conf *conf; + + conf = kzalloc(sizeof *conf, GFP_KERNEL); + if (!conf) + return ERR_PTR(-ENOMEM); + + conf->dev = dev; + + return conf; +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_init_ctx); + +void vb2_dma_contig_cleanup_ctx(void *alloc_ctx) +{ + kfree(alloc_ctx); +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx); + +MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c new file mode 100644 index 000000000000..b2d9485aac75 --- /dev/null +++ b/drivers/media/video/videobuf2-dma-sg.c @@ -0,0 +1,294 @@ +/* + * videobuf2-dma-sg.c - dma scatter/gather memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/scatterlist.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <media/videobuf2-core.h> +#include <media/videobuf2-memops.h> +#include <media/videobuf2-dma-sg.h> + +struct vb2_dma_sg_buf { + void *vaddr; + struct page **pages; + int write; + int offset; + struct vb2_dma_sg_desc sg_desc; + atomic_t refcount; + struct vb2_vmarea_handler handler; +}; + +static void vb2_dma_sg_put(void *buf_priv); + +static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size) +{ + struct vb2_dma_sg_buf *buf; + int i; + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return NULL; + + buf->vaddr = NULL; + buf->write = 0; + buf->offset = 0; + buf->sg_desc.size = size; + buf->sg_desc.num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + + buf->sg_desc.sglist = vmalloc(buf->sg_desc.num_pages * + sizeof(*buf->sg_desc.sglist)); + if (!buf->sg_desc.sglist) + goto fail_sglist_alloc; + memset(buf->sg_desc.sglist, 0, buf->sg_desc.num_pages * + sizeof(*buf->sg_desc.sglist)); + sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages); + + buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *), + GFP_KERNEL); + if (!buf->pages) + goto fail_pages_array_alloc; + + for (i = 0; i < buf->sg_desc.num_pages; ++i) { + buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); + if (NULL == buf->pages[i]) + goto fail_pages_alloc; + sg_set_page(&buf->sg_desc.sglist[i], + buf->pages[i], PAGE_SIZE, 0); + } + + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_dma_sg_put; + buf->handler.arg = buf; + + atomic_inc(&buf->refcount); + + printk(KERN_DEBUG "%s: Allocated buffer of %d pages\n", + __func__, buf->sg_desc.num_pages); + + if (!buf->vaddr) + buf->vaddr = vm_map_ram(buf->pages, + buf->sg_desc.num_pages, + -1, + PAGE_KERNEL); + return buf; + +fail_pages_alloc: + while (--i >= 0) + __free_page(buf->pages[i]); + kfree(buf->pages); + +fail_pages_array_alloc: + vfree(buf->sg_desc.sglist); + +fail_sglist_alloc: + kfree(buf); + return NULL; +} + +static void vb2_dma_sg_put(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + int i = buf->sg_desc.num_pages; + + if (atomic_dec_and_test(&buf->refcount)) { + printk(KERN_DEBUG "%s: Freeing buffer of %d pages\n", __func__, + buf->sg_desc.num_pages); + if (buf->vaddr) + vm_unmap_ram(buf->vaddr, buf->sg_desc.num_pages); + vfree(buf->sg_desc.sglist); + while (--i >= 0) + __free_page(buf->pages[i]); + kfree(buf->pages); + kfree(buf); + } +} + +static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr, + unsigned long size, int write) +{ + struct vb2_dma_sg_buf *buf; + unsigned long first, last; + int num_pages_from_user, i; + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return NULL; + + buf->vaddr = NULL; + buf->write = write; + buf->offset = vaddr & ~PAGE_MASK; + buf->sg_desc.size = size; + + first = (vaddr & PAGE_MASK) >> PAGE_SHIFT; + last = ((vaddr + size - 1) & PAGE_MASK) >> PAGE_SHIFT; + buf->sg_desc.num_pages = last - first + 1; + + buf->sg_desc.sglist = vmalloc( + buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist)); + if (!buf->sg_desc.sglist) + goto userptr_fail_sglist_alloc; + + memset(buf->sg_desc.sglist, 0, + buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist)); + sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages); + + buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *), + GFP_KERNEL); + if (!buf->pages) + goto userptr_fail_pages_array_alloc; + + down_read(¤t->mm->mmap_sem); + num_pages_from_user = get_user_pages(current, current->mm, + vaddr & PAGE_MASK, + buf->sg_desc.num_pages, + write, + 1, /* force */ + buf->pages, + NULL); + up_read(¤t->mm->mmap_sem); + if (num_pages_from_user != buf->sg_desc.num_pages) + goto userptr_fail_get_user_pages; + + sg_set_page(&buf->sg_desc.sglist[0], buf->pages[0], + PAGE_SIZE - buf->offset, buf->offset); + size -= PAGE_SIZE - buf->offset; + for (i = 1; i < buf->sg_desc.num_pages; ++i) { + sg_set_page(&buf->sg_desc.sglist[i], buf->pages[i], + min_t(size_t, PAGE_SIZE, size), 0); + size -= min_t(size_t, PAGE_SIZE, size); + } + return buf; + +userptr_fail_get_user_pages: + printk(KERN_DEBUG "get_user_pages requested/got: %d/%d]\n", + num_pages_from_user, buf->sg_desc.num_pages); + while (--num_pages_from_user >= 0) + put_page(buf->pages[num_pages_from_user]); + kfree(buf->pages); + +userptr_fail_pages_array_alloc: + vfree(buf->sg_desc.sglist); + +userptr_fail_sglist_alloc: + kfree(buf); + return NULL; +} + +/* + * @put_userptr: inform the allocator that a USERPTR buffer will no longer + * be used + */ +static void vb2_dma_sg_put_userptr(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + int i = buf->sg_desc.num_pages; + + printk(KERN_DEBUG "%s: Releasing userspace buffer of %d pages\n", + __func__, buf->sg_desc.num_pages); + if (buf->vaddr) + vm_unmap_ram(buf->vaddr, buf->sg_desc.num_pages); + while (--i >= 0) { + if (buf->write) + set_page_dirty_lock(buf->pages[i]); + put_page(buf->pages[i]); + } + vfree(buf->sg_desc.sglist); + kfree(buf->pages); + kfree(buf); +} + +static void *vb2_dma_sg_vaddr(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + BUG_ON(!buf); + + if (!buf->vaddr) + buf->vaddr = vm_map_ram(buf->pages, + buf->sg_desc.num_pages, + -1, + PAGE_KERNEL); + + /* add offset in case userptr is not page-aligned */ + return buf->vaddr + buf->offset; +} + +static unsigned int vb2_dma_sg_num_users(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + return atomic_read(&buf->refcount); +} + +static int vb2_dma_sg_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + unsigned long uaddr = vma->vm_start; + unsigned long usize = vma->vm_end - vma->vm_start; + int i = 0; + + if (!buf) { + printk(KERN_ERR "No memory to map\n"); + return -EINVAL; + } + + do { + int ret; + + ret = vm_insert_page(vma, uaddr, buf->pages[i++]); + if (ret) { + printk(KERN_ERR "Remapping memory, error: %d\n", ret); + return ret; + } + + uaddr += PAGE_SIZE; + usize -= PAGE_SIZE; + } while (usize > 0); + + + /* + * Use common vm_area operations to track buffer refcount. + */ + vma->vm_private_data = &buf->handler; + vma->vm_ops = &vb2_common_vm_ops; + + vma->vm_ops->open(vma); + + return 0; +} + +static void *vb2_dma_sg_cookie(void *buf_priv) +{ + struct vb2_dma_sg_buf *buf = buf_priv; + + return &buf->sg_desc; +} + +const struct vb2_mem_ops vb2_dma_sg_memops = { + .alloc = vb2_dma_sg_alloc, + .put = vb2_dma_sg_put, + .get_userptr = vb2_dma_sg_get_userptr, + .put_userptr = vb2_dma_sg_put_userptr, + .vaddr = vb2_dma_sg_vaddr, + .mmap = vb2_dma_sg_mmap, + .num_users = vb2_dma_sg_num_users, + .cookie = vb2_dma_sg_cookie, +}; +EXPORT_SYMBOL_GPL(vb2_dma_sg_memops); + +MODULE_DESCRIPTION("dma scatter/gather memory handling routines for videobuf2"); +MODULE_AUTHOR("Andrzej Pietrasiewicz"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/video/videobuf2-memops.c new file mode 100644 index 000000000000..5370a3a7ee25 --- /dev/null +++ b/drivers/media/video/videobuf2-memops.c @@ -0,0 +1,235 @@ +/* + * videobuf2-memops.c - generic memory handling routines for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/file.h> +#include <linux/slab.h> + +#include <media/videobuf2-core.h> +#include <media/videobuf2-memops.h> + +/** + * vb2_get_vma() - acquire and lock the virtual memory area + * @vma: given virtual memory area + * + * This function attempts to acquire an area mapped in the userspace for + * the duration of a hardware operation. The area is "locked" by performing + * the same set of operation that are done when process calls fork() and + * memory areas are duplicated. + * + * Returns a copy of a virtual memory region on success or NULL. + */ +struct vm_area_struct *vb2_get_vma(struct vm_area_struct *vma) +{ + struct vm_area_struct *vma_copy; + + vma_copy = kmalloc(sizeof(*vma_copy), GFP_KERNEL); + if (vma_copy == NULL) + return NULL; + + if (vma->vm_ops && vma->vm_ops->open) + vma->vm_ops->open(vma); + + if (vma->vm_file) + get_file(vma->vm_file); + + memcpy(vma_copy, vma, sizeof(*vma)); + + vma_copy->vm_mm = NULL; + vma_copy->vm_next = NULL; + vma_copy->vm_prev = NULL; + + return vma_copy; +} + +/** + * vb2_put_userptr() - release a userspace virtual memory area + * @vma: virtual memory region associated with the area to be released + * + * This function releases the previously acquired memory area after a hardware + * operation. + */ +void vb2_put_vma(struct vm_area_struct *vma) +{ + if (!vma) + return; + + if (vma->vm_file) + fput(vma->vm_file); + + if (vma->vm_ops && vma->vm_ops->close) + vma->vm_ops->close(vma); + + kfree(vma); +} +EXPORT_SYMBOL_GPL(vb2_put_vma); + +/** + * vb2_get_contig_userptr() - lock physically contiguous userspace mapped memory + * @vaddr: starting virtual address of the area to be verified + * @size: size of the area + * @res_paddr: will return physical address for the given vaddr + * @res_vma: will return locked copy of struct vm_area for the given area + * + * This function will go through memory area of size @size mapped at @vaddr and + * verify that the underlying physical pages are contiguous. If they are + * contiguous the virtual memory area is locked and a @res_vma is filled with + * the copy and @res_pa set to the physical address of the buffer. + * + * Returns 0 on success. + */ +int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size, + struct vm_area_struct **res_vma, dma_addr_t *res_pa) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + unsigned long offset, start, end; + unsigned long this_pfn, prev_pfn; + dma_addr_t pa = 0; + int ret = -EFAULT; + + start = vaddr; + offset = start & ~PAGE_MASK; + end = start + size; + + down_read(&mm->mmap_sem); + vma = find_vma(mm, start); + + if (vma == NULL || vma->vm_end < end) + goto done; + + for (prev_pfn = 0; start < end; start += PAGE_SIZE) { + ret = follow_pfn(vma, start, &this_pfn); + if (ret) + goto done; + + if (prev_pfn == 0) + pa = this_pfn << PAGE_SHIFT; + else if (this_pfn != prev_pfn + 1) { + ret = -EFAULT; + goto done; + } + prev_pfn = this_pfn; + } + + /* + * Memory is contigous, lock vma and return to the caller + */ + *res_vma = vb2_get_vma(vma); + if (*res_vma == NULL) { + ret = -ENOMEM; + goto done; + } + *res_pa = pa + offset; + ret = 0; + +done: + up_read(&mm->mmap_sem); + return ret; +} +EXPORT_SYMBOL_GPL(vb2_get_contig_userptr); + +/** + * vb2_mmap_pfn_range() - map physical pages to userspace + * @vma: virtual memory region for the mapping + * @paddr: starting physical address of the memory to be mapped + * @size: size of the memory to be mapped + * @vm_ops: vm operations to be assigned to the created area + * @priv: private data to be associated with the area + * + * Returns 0 on success. + */ +int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr, + unsigned long size, + const struct vm_operations_struct *vm_ops, + void *priv) +{ + int ret; + + size = min_t(unsigned long, vma->vm_end - vma->vm_start, size); + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + ret = remap_pfn_range(vma, vma->vm_start, paddr >> PAGE_SHIFT, + size, vma->vm_page_prot); + if (ret) { + printk(KERN_ERR "Remapping memory failed, error: %d\n", ret); + return ret; + } + + vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED; + vma->vm_private_data = priv; + vma->vm_ops = vm_ops; + + vma->vm_ops->open(vma); + + printk(KERN_DEBUG "%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n", + __func__, paddr, vma->vm_start, size); + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_mmap_pfn_range); + +/** + * vb2_common_vm_open() - increase refcount of the vma + * @vma: virtual memory region for the mapping + * + * This function adds another user to the provided vma. It expects + * struct vb2_vmarea_handler pointer in vma->vm_private_data. + */ +static void vb2_common_vm_open(struct vm_area_struct *vma) +{ + struct vb2_vmarea_handler *h = vma->vm_private_data; + + printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n", + __func__, h, atomic_read(h->refcount), vma->vm_start, + vma->vm_end); + + atomic_inc(h->refcount); +} + +/** + * vb2_common_vm_close() - decrease refcount of the vma + * @vma: virtual memory region for the mapping + * + * This function releases the user from the provided vma. It expects + * struct vb2_vmarea_handler pointer in vma->vm_private_data. + */ +static void vb2_common_vm_close(struct vm_area_struct *vma) +{ + struct vb2_vmarea_handler *h = vma->vm_private_data; + + printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n", + __func__, h, atomic_read(h->refcount), vma->vm_start, + vma->vm_end); + + h->put(h->arg); +} + +/** + * vb2_common_vm_ops - common vm_ops used for tracking refcount of mmaped + * video buffers + */ +const struct vm_operations_struct vb2_common_vm_ops = { + .open = vb2_common_vm_open, + .close = vb2_common_vm_close, +}; +EXPORT_SYMBOL_GPL(vb2_common_vm_ops); + +MODULE_DESCRIPTION("common memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/videobuf2-vmalloc.c b/drivers/media/video/videobuf2-vmalloc.c new file mode 100644 index 000000000000..a3a884234059 --- /dev/null +++ b/drivers/media/video/videobuf2-vmalloc.c @@ -0,0 +1,132 @@ +/* + * videobuf2-vmalloc.c - vmalloc memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <media/videobuf2-core.h> +#include <media/videobuf2-memops.h> + +struct vb2_vmalloc_buf { + void *vaddr; + unsigned long size; + atomic_t refcount; + struct vb2_vmarea_handler handler; +}; + +static void vb2_vmalloc_put(void *buf_priv); + +static void *vb2_vmalloc_alloc(void *alloc_ctx, unsigned long size) +{ + struct vb2_vmalloc_buf *buf; + + buf = kzalloc(sizeof *buf, GFP_KERNEL); + if (!buf) + return NULL; + + buf->size = size; + buf->vaddr = vmalloc_user(buf->size); + buf->handler.refcount = &buf->refcount; + buf->handler.put = vb2_vmalloc_put; + buf->handler.arg = buf; + + if (!buf->vaddr) { + printk(KERN_ERR "vmalloc of size %ld failed\n", buf->size); + kfree(buf); + return NULL; + } + + atomic_inc(&buf->refcount); + printk(KERN_DEBUG "Allocated vmalloc buffer of size %ld at vaddr=%p\n", + buf->size, buf->vaddr); + + return buf; +} + +static void vb2_vmalloc_put(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + + if (atomic_dec_and_test(&buf->refcount)) { + printk(KERN_DEBUG "%s: Freeing vmalloc mem at vaddr=%p\n", + __func__, buf->vaddr); + vfree(buf->vaddr); + kfree(buf); + } +} + +static void *vb2_vmalloc_vaddr(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + + BUG_ON(!buf); + + if (!buf->vaddr) { + printk(KERN_ERR "Address of an unallocated plane requested\n"); + return NULL; + } + + return buf->vaddr; +} + +static unsigned int vb2_vmalloc_num_users(void *buf_priv) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + return atomic_read(&buf->refcount); +} + +static int vb2_vmalloc_mmap(void *buf_priv, struct vm_area_struct *vma) +{ + struct vb2_vmalloc_buf *buf = buf_priv; + int ret; + + if (!buf) { + printk(KERN_ERR "No memory to map\n"); + return -EINVAL; + } + + ret = remap_vmalloc_range(vma, buf->vaddr, 0); + if (ret) { + printk(KERN_ERR "Remapping vmalloc memory, error: %d\n", ret); + return ret; + } + + /* + * Make sure that vm_areas for 2 buffers won't be merged together + */ + vma->vm_flags |= VM_DONTEXPAND; + + /* + * Use common vm_area operations to track buffer refcount. + */ + vma->vm_private_data = &buf->handler; + vma->vm_ops = &vb2_common_vm_ops; + + vma->vm_ops->open(vma); + + return 0; +} + +const struct vb2_mem_ops vb2_vmalloc_memops = { + .alloc = vb2_vmalloc_alloc, + .put = vb2_vmalloc_put, + .vaddr = vb2_vmalloc_vaddr, + .mmap = vb2_vmalloc_mmap, + .num_users = vb2_vmalloc_num_users, +}; +EXPORT_SYMBOL_GPL(vb2_vmalloc_memops); + +MODULE_DESCRIPTION("vmalloc memory handling routines for videobuf2"); +MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index c49c39386bd0..2238a613d664 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -7,6 +7,9 @@ * John Sokol <sokol--a.t--videotechnology.com> * http://v4l.videotechnology.com/ * + * Conversion to videobuf2 by Pawel Osciak & Marek Szyprowski + * Copyright (c) 2010 Samsung Electronics + * * This program is free software; you can redistribute it and/or modify * it under the terms of the BSD Licence, GNU General Public License * as published by the Free Software Foundation; either version 2 of the @@ -23,12 +26,12 @@ #include <linux/mutex.h> #include <linux/videodev2.h> #include <linux/kthread.h> -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) #include <linux/freezer.h> -#endif -#include <media/videobuf-vmalloc.h> +#include <media/videobuf2-vmalloc.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-fh.h> #include <media/v4l2-common.h> #define VIVI_MODULE_NAME "vivi" @@ -42,7 +45,7 @@ #define MAX_HEIGHT 1200 #define VIVI_MAJOR_VERSION 0 -#define VIVI_MINOR_VERSION 7 +#define VIVI_MINOR_VERSION 8 #define VIVI_RELEASE 0 #define VIVI_VERSION \ KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE) @@ -133,16 +136,11 @@ static struct vivi_fmt *get_format(struct v4l2_format *f) return &formats[k]; } -struct sg_to_addr { - int pos; - struct scatterlist *sg; -}; - /* buffer for one video frame */ struct vivi_buffer { /* common v4l buffer stuff -- must be first */ - struct videobuf_buffer vb; - + struct vb2_buffer vb; + struct list_head list; struct vivi_fmt *fmt; }; @@ -162,13 +160,20 @@ static LIST_HEAD(vivi_devlist); struct vivi_dev { struct list_head vivi_devlist; struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; /* controls */ - int brightness; - int contrast; - int saturation; - int hue; - int volume; + struct v4l2_ctrl *brightness; + struct v4l2_ctrl *contrast; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *hue; + struct v4l2_ctrl *volume; + struct v4l2_ctrl *button; + struct v4l2_ctrl *boolean; + struct v4l2_ctrl *int32; + struct v4l2_ctrl *int64; + struct v4l2_ctrl *menu; + struct v4l2_ctrl *string; spinlock_t slock; struct mutex mutex; @@ -181,6 +186,7 @@ struct vivi_dev { /* Several counters */ unsigned ms; unsigned long jiffies; + unsigned button_pressed; int mv_count; /* Controls bars movement */ @@ -190,9 +196,10 @@ struct vivi_dev { /* video capture */ struct vivi_fmt *fmt; unsigned int width, height; - struct videobuf_queue vb_vidq; + struct vb2_queue vb_vidq; + enum v4l2_field field; + unsigned int field_count; - unsigned long generating; u8 bars[9][3]; u8 line[MAX_WIDTH * 4]; }; @@ -443,10 +450,10 @@ static void gen_text(struct vivi_dev *dev, char *basep, static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) { - int hmax = buf->vb.height; - int wmax = buf->vb.width; + int wmax = dev->width; + int hmax = dev->height; struct timeval ts; - void *vbuf = videobuf_to_vmalloc(&buf->vb); + void *vbuf = vb2_plane_vaddr(&buf->vb, 0); unsigned ms; char str[100]; int h, line = 1; @@ -472,22 +479,38 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) dev->width, dev->height, dev->input); gen_text(dev, vbuf, line++ * 16, 16, str); + mutex_lock(&dev->ctrl_handler.lock); snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ", - dev->brightness, - dev->contrast, - dev->saturation, - dev->hue); + dev->brightness->cur.val, + dev->contrast->cur.val, + dev->saturation->cur.val, + dev->hue->cur.val); gen_text(dev, vbuf, line++ * 16, 16, str); - snprintf(str, sizeof(str), " volume %3d ", dev->volume); + snprintf(str, sizeof(str), " volume %3d ", dev->volume->cur.val); gen_text(dev, vbuf, line++ * 16, 16, str); + snprintf(str, sizeof(str), " int32 %d, int64 %lld ", + dev->int32->cur.val, + dev->int64->cur.val64); + gen_text(dev, vbuf, line++ * 16, 16, str); + snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ", + dev->boolean->cur.val, + dev->menu->qmenu[dev->menu->cur.val], + dev->string->cur.string); + mutex_unlock(&dev->ctrl_handler.lock); + gen_text(dev, vbuf, line++ * 16, 16, str); + if (dev->button_pressed) { + dev->button_pressed--; + snprintf(str, sizeof(str), " button pressed!"); + gen_text(dev, vbuf, line++ * 16, 16, str); + } dev->mv_count += 2; - /* Advice that buffer was filled */ - buf->vb.field_count++; + buf->vb.v4l2_buf.field = dev->field; + dev->field_count++; + buf->vb.v4l2_buf.sequence = dev->field_count >> 1; do_gettimeofday(&ts); - buf->vb.ts = ts; - buf->vb.state = VIDEOBUF_DONE; + buf->vb.v4l2_buf.timestamp = ts; } static void vivi_thread_tick(struct vivi_dev *dev) @@ -504,23 +527,17 @@ static void vivi_thread_tick(struct vivi_dev *dev) goto unlock; } - buf = list_entry(dma_q->active.next, - struct vivi_buffer, vb.queue); + buf = list_entry(dma_q->active.next, struct vivi_buffer, list); + list_del(&buf->list); - /* Nobody is waiting on this buffer, return */ - if (!waitqueue_active(&buf->vb.done)) - goto unlock; - - list_del(&buf->vb.queue); - - do_gettimeofday(&buf->vb.ts); + do_gettimeofday(&buf->vb.v4l2_buf.timestamp); /* Fill buffer */ vivi_fillbuff(dev, buf); dprintk(dev, 1, "filled buffer %p\n", buf); - wake_up(&buf->vb.done); - dprintk(dev, 2, "[%p/%d] wakeup\n", buf, buf->vb. i); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); + dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index); unlock: spin_unlock_irqrestore(&dev->slock, flags); } @@ -571,17 +588,12 @@ static int vivi_thread(void *data) return 0; } -static void vivi_start_generating(struct file *file) +static int vivi_start_generating(struct vivi_dev *dev) { - struct vivi_dev *dev = video_drvdata(file); struct vivi_dmaqueue *dma_q = &dev->vidq; dprintk(dev, 1, "%s\n", __func__); - if (test_and_set_bit(0, &dev->generating)) - return; - file->private_data = dev; - /* Resets frame counters */ dev->ms = 0; dev->mv_count = 0; @@ -593,146 +605,200 @@ static void vivi_start_generating(struct file *file) if (IS_ERR(dma_q->kthread)) { v4l2_err(&dev->v4l2_dev, "kernel_thread() failed\n"); - clear_bit(0, &dev->generating); - return; + return PTR_ERR(dma_q->kthread); } /* Wakes thread */ wake_up_interruptible(&dma_q->wq); dprintk(dev, 1, "returning from %s\n", __func__); + return 0; } -static void vivi_stop_generating(struct file *file) +static void vivi_stop_generating(struct vivi_dev *dev) { - struct vivi_dev *dev = video_drvdata(file); struct vivi_dmaqueue *dma_q = &dev->vidq; dprintk(dev, 1, "%s\n", __func__); - if (!file->private_data) - return; - if (!test_and_clear_bit(0, &dev->generating)) - return; - /* shutdown control thread */ if (dma_q->kthread) { kthread_stop(dma_q->kthread); dma_q->kthread = NULL; } - videobuf_stop(&dev->vb_vidq); - videobuf_mmap_free(&dev->vb_vidq); -} -static int vivi_is_generating(struct vivi_dev *dev) -{ - return test_bit(0, &dev->generating); + /* + * Typical driver might need to wait here until dma engine stops. + * In this case we can abort imiedetly, so it's just a noop. + */ + + /* Release all active buffers */ + while (!list_empty(&dma_q->active)) { + struct vivi_buffer *buf; + buf = list_entry(dma_q->active.next, struct vivi_buffer, list); + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index); + } } - /* ------------------------------------------------------------------ Videobuf operations ------------------------------------------------------------------*/ -static int -buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) { - struct vivi_dev *dev = vq->priv_data; + struct vivi_dev *dev = vb2_get_drv_priv(vq); + unsigned long size; + + size = dev->width * dev->height * 2; + + if (0 == *nbuffers) + *nbuffers = 32; - *size = dev->width * dev->height * 2; + while (size * *nbuffers > vid_limit * 1024 * 1024) + (*nbuffers)--; - if (0 == *count) - *count = 32; + *nplanes = 1; - while (*size * *count > vid_limit * 1024 * 1024) - (*count)--; + sizes[0] = size; - dprintk(dev, 1, "%s, count=%d, size=%d\n", __func__, - *count, *size); + /* + * videobuf2-vmalloc allocator is context-less so no need to set + * alloc_ctxs array. + */ + + dprintk(dev, 1, "%s, count=%d, size=%ld\n", __func__, + *nbuffers, size); return 0; } -static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) +static int buffer_init(struct vb2_buffer *vb) { - struct vivi_dev *dev = vq->priv_data; + struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + + BUG_ON(NULL == dev->fmt); - dprintk(dev, 1, "%s, state: %i\n", __func__, buf->vb.state); + /* + * This callback is called once per buffer, after its allocation. + * + * Vivi does not allow changing format during streaming, but it is + * possible to do so when streaming is paused (i.e. in streamoff state). + * Buffers however are not freed when going into streamoff and so + * buffer size verification has to be done in buffer_prepare, on each + * qbuf. + * It would be best to move verification code here to buf_init and + * s_fmt though. + */ - videobuf_vmalloc_free(&buf->vb); - dprintk(dev, 1, "free_buffer: freed\n"); - buf->vb.state = VIDEOBUF_NEEDS_INIT; + return 0; } -static int -buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, - enum v4l2_field field) +static int buffer_prepare(struct vb2_buffer *vb) { - struct vivi_dev *dev = vq->priv_data; + struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); - int rc; + unsigned long size; - dprintk(dev, 1, "%s, field=%d\n", __func__, field); + dprintk(dev, 1, "%s, field=%d\n", __func__, vb->v4l2_buf.field); BUG_ON(NULL == dev->fmt); + /* + * Theses properties only change when queue is idle, see s_fmt. + * The below checks should not be performed here, on each + * buffer_prepare (i.e. on each qbuf). Most of the code in this function + * should thus be moved to buffer_init and s_fmt. + */ if (dev->width < 48 || dev->width > MAX_WIDTH || dev->height < 32 || dev->height > MAX_HEIGHT) return -EINVAL; - buf->vb.size = dev->width * dev->height * 2; - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + size = dev->width * dev->height * 2; + if (vb2_plane_size(vb, 0) < size) { + dprintk(dev, 1, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); return -EINVAL; + } - /* These properties only change when queue is idle, see s_fmt */ - buf->fmt = dev->fmt; - buf->vb.width = dev->width; - buf->vb.height = dev->height; - buf->vb.field = field; + vb2_set_plane_payload(&buf->vb, 0, size); + + buf->fmt = dev->fmt; precalculate_bars(dev); precalculate_line(dev); - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc < 0) - goto fail; - } + return 0; +} - buf->vb.state = VIDEOBUF_PREPARED; +static int buffer_finish(struct vb2_buffer *vb) +{ + struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + dprintk(dev, 1, "%s\n", __func__); return 0; +} + +static void buffer_cleanup(struct vb2_buffer *vb) +{ + struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); + dprintk(dev, 1, "%s\n", __func__); -fail: - free_buffer(vq, buf); - return rc; } -static void -buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +static void buffer_queue(struct vb2_buffer *vb) { - struct vivi_dev *dev = vq->priv_data; + struct vivi_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); struct vivi_dmaqueue *vidq = &dev->vidq; + unsigned long flags = 0; dprintk(dev, 1, "%s\n", __func__); - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vidq->active); + spin_lock_irqsave(&dev->slock, flags); + list_add_tail(&buf->list, &vidq->active); + spin_unlock_irqrestore(&dev->slock, flags); } -static void buffer_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) +static int start_streaming(struct vb2_queue *vq) { - struct vivi_dev *dev = vq->priv_data; - struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); + struct vivi_dev *dev = vb2_get_drv_priv(vq); + dprintk(dev, 1, "%s\n", __func__); + return vivi_start_generating(dev); +} +/* abort streaming and wait for last buffer */ +static int stop_streaming(struct vb2_queue *vq) +{ + struct vivi_dev *dev = vb2_get_drv_priv(vq); dprintk(dev, 1, "%s\n", __func__); + vivi_stop_generating(dev); + return 0; +} - free_buffer(vq, buf); +static void vivi_lock(struct vb2_queue *vq) +{ + struct vivi_dev *dev = vb2_get_drv_priv(vq); + mutex_lock(&dev->mutex); } -static struct videobuf_queue_ops vivi_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, +static void vivi_unlock(struct vb2_queue *vq) +{ + struct vivi_dev *dev = vb2_get_drv_priv(vq); + mutex_unlock(&dev->mutex); +} + + +static struct vb2_ops vivi_video_qops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_finish = buffer_finish, + .buf_cleanup = buffer_cleanup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = vivi_unlock, + .wait_finish = vivi_lock, }; /* ------------------------------------------------------------------ @@ -774,7 +840,7 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; - f->fmt.pix.field = dev->vb_vidq.field; + f->fmt.pix.field = dev->field; f->fmt.pix.pixelformat = dev->fmt->fourcc; f->fmt.pix.bytesperline = (f->fmt.pix.width * dev->fmt->depth) >> 3; @@ -820,82 +886,60 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct vivi_dev *dev = video_drvdata(file); + struct vb2_queue *q = &dev->vb_vidq; int ret = vidioc_try_fmt_vid_cap(file, priv, f); if (ret < 0) return ret; - if (vivi_is_generating(dev)) { + if (vb2_is_streaming(q)) { dprintk(dev, 1, "%s device busy\n", __func__); - ret = -EBUSY; - goto out; + return -EBUSY; } dev->fmt = get_format(f); dev->width = f->fmt.pix.width; dev->height = f->fmt.pix.height; - dev->vb_vidq.field = f->fmt.pix.field; - ret = 0; -out: - return ret; + dev->field = f->fmt.pix.field; + + return 0; } static int vidioc_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { struct vivi_dev *dev = video_drvdata(file); - - return videobuf_reqbufs(&dev->vb_vidq, p); + return vb2_reqbufs(&dev->vb_vidq, p); } static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct vivi_dev *dev = video_drvdata(file); - - return videobuf_querybuf(&dev->vb_vidq, p); + return vb2_querybuf(&dev->vb_vidq, p); } static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct vivi_dev *dev = video_drvdata(file); - - return videobuf_qbuf(&dev->vb_vidq, p); + return vb2_qbuf(&dev->vb_vidq, p); } static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct vivi_dev *dev = video_drvdata(file); - - return videobuf_dqbuf(&dev->vb_vidq, p, - file->f_flags & O_NONBLOCK); + return vb2_dqbuf(&dev->vb_vidq, p, file->f_flags & O_NONBLOCK); } static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { struct vivi_dev *dev = video_drvdata(file); - int ret; - - if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - ret = videobuf_streamon(&dev->vb_vidq); - if (ret) - return ret; - - vivi_start_generating(file); - return 0; + return vb2_streamon(&dev->vb_vidq, i); } static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) { struct vivi_dev *dev = video_drvdata(file); - int ret; - - if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - ret = videobuf_streamoff(&dev->vb_vidq); - if (!ret) - vivi_stop_generating(file); - return ret; + return vb2_streamoff(&dev->vb_vidq, i); } static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) @@ -938,80 +982,14 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) } /* --- controls ---------------------------------------------- */ -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 200); - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 127); - case V4L2_CID_CONTRAST: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 16); - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 127); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - } - return -EINVAL; -} -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int vivi_s_ctrl(struct v4l2_ctrl *ctrl) { - struct vivi_dev *dev = video_drvdata(file); + struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler); - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = dev->volume; - return 0; - case V4L2_CID_BRIGHTNESS: - ctrl->value = dev->brightness; - return 0; - case V4L2_CID_CONTRAST: - ctrl->value = dev->contrast; - return 0; - case V4L2_CID_SATURATION: - ctrl->value = dev->saturation; - return 0; - case V4L2_CID_HUE: - ctrl->value = dev->hue; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct vivi_dev *dev = video_drvdata(file); - struct v4l2_queryctrl qc; - int err; - - qc.id = ctrl->id; - err = vidioc_queryctrl(file, priv, &qc); - if (err < 0) - return err; - if (ctrl->value < qc.minimum || ctrl->value > qc.maximum) - return -ERANGE; - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - dev->volume = ctrl->value; - return 0; - case V4L2_CID_BRIGHTNESS: - dev->brightness = ctrl->value; - return 0; - case V4L2_CID_CONTRAST: - dev->contrast = ctrl->value; - return 0; - case V4L2_CID_SATURATION: - dev->saturation = ctrl->value; - return 0; - case V4L2_CID_HUE: - dev->hue = ctrl->value; - return 0; - } - return -EINVAL; + if (ctrl == dev->button) + dev->button_pressed = 30; + return 0; } /* ------------------------------------------------------------------ @@ -1023,21 +1001,19 @@ vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct vivi_dev *dev = video_drvdata(file); - vivi_start_generating(file); - return videobuf_read_stream(&dev->vb_vidq, data, count, ppos, 0, - file->f_flags & O_NONBLOCK); + dprintk(dev, 1, "read called\n"); + return vb2_read(&dev->vb_vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); } static unsigned int vivi_poll(struct file *file, struct poll_table_struct *wait) { struct vivi_dev *dev = video_drvdata(file); - struct videobuf_queue *q = &dev->vb_vidq; + struct vb2_queue *q = &dev->vb_vidq; dprintk(dev, 1, "%s\n", __func__); - - vivi_start_generating(file); - return videobuf_poll_stream(file, q, wait); + return vb2_poll(q, file, wait); } static int vivi_close(struct file *file) @@ -1045,11 +1021,12 @@ static int vivi_close(struct file *file) struct video_device *vdev = video_devdata(file); struct vivi_dev *dev = video_drvdata(file); - vivi_stop_generating(file); + dprintk(dev, 1, "close called (dev=%s), file %p\n", + video_device_node_name(vdev), file); - dprintk(dev, 1, "close called (dev=%s)\n", - video_device_node_name(vdev)); - return 0; + if (v4l2_fh_is_singular_file(file)) + vb2_queue_release(&dev->vb_vidq); + return v4l2_fh_release(file); } static int vivi_mmap(struct file *file, struct vm_area_struct *vma) @@ -1059,8 +1036,7 @@ static int vivi_mmap(struct file *file, struct vm_area_struct *vma) dprintk(dev, 1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); - ret = videobuf_mmap_mapper(&dev->vb_vidq, vma); - + ret = vb2_mmap(&dev->vb_vidq, vma); dprintk(dev, 1, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, @@ -1068,8 +1044,82 @@ static int vivi_mmap(struct file *file, struct vm_area_struct *vma) return ret; } +static const struct v4l2_ctrl_ops vivi_ctrl_ops = { + .s_ctrl = vivi_s_ctrl, +}; + +#define VIVI_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000) + +static const struct v4l2_ctrl_config vivi_ctrl_button = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 0, + .name = "Button", + .type = V4L2_CTRL_TYPE_BUTTON, +}; + +static const struct v4l2_ctrl_config vivi_ctrl_boolean = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 1, + .name = "Boolean", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, + .def = 1, +}; + +static const struct v4l2_ctrl_config vivi_ctrl_int32 = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 2, + .name = "Integer 32 Bits", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 0x80000000, + .max = 0x7fffffff, + .step = 1, +}; + +static const struct v4l2_ctrl_config vivi_ctrl_int64 = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 3, + .name = "Integer 64 Bits", + .type = V4L2_CTRL_TYPE_INTEGER64, +}; + +static const char * const vivi_ctrl_menu_strings[] = { + "Menu Item 0 (Skipped)", + "Menu Item 1", + "Menu Item 2 (Skipped)", + "Menu Item 3", + "Menu Item 4", + "Menu Item 5 (Skipped)", + NULL, +}; + +static const struct v4l2_ctrl_config vivi_ctrl_menu = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 4, + .name = "Menu", + .type = V4L2_CTRL_TYPE_MENU, + .min = 1, + .max = 4, + .def = 3, + .menu_skip_mask = 0x04, + .qmenu = vivi_ctrl_menu_strings, +}; + +static const struct v4l2_ctrl_config vivi_ctrl_string = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 5, + .name = "String", + .type = V4L2_CTRL_TYPE_STRING, + .min = 2, + .max = 4, + .step = 1, +}; + static const struct v4l2_file_operations vivi_fops = { .owner = THIS_MODULE, + .open = v4l2_fh_open, .release = vivi_close, .read = vivi_read, .poll = vivi_poll, @@ -1093,9 +1143,6 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = { .vidioc_s_input = vidioc_s_input, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, }; static struct video_device vivi_template = { @@ -1126,6 +1173,7 @@ static int vivi_release(void) video_device_node_name(dev->vfd)); video_unregister_device(dev->vfd); v4l2_device_unregister(&dev->v4l2_dev); + v4l2_ctrl_handler_free(&dev->ctrl_handler); kfree(dev); } @@ -1136,6 +1184,8 @@ static int __init vivi_create_instance(int inst) { struct vivi_dev *dev; struct video_device *vfd; + struct v4l2_ctrl_handler *hdl; + struct vb2_queue *q; int ret; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1151,20 +1201,46 @@ static int __init vivi_create_instance(int inst) dev->fmt = &formats[0]; dev->width = 640; dev->height = 480; - dev->volume = 200; - dev->brightness = 127; - dev->contrast = 16; - dev->saturation = 127; - dev->hue = 0; + hdl = &dev->ctrl_handler; + v4l2_ctrl_handler_init(hdl, 11); + dev->volume = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 255, 1, 200); + dev->brightness = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 127); + dev->contrast = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 16); + dev->saturation = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 127); + dev->hue = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + dev->button = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_button, NULL); + dev->int32 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int32, NULL); + dev->int64 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int64, NULL); + dev->boolean = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_boolean, NULL); + dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL); + dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL); + if (hdl->error) { + ret = hdl->error; + goto unreg_dev; + } + dev->v4l2_dev.ctrl_handler = hdl; /* initialize locks */ spin_lock_init(&dev->slock); - mutex_init(&dev->mutex); - videobuf_queue_vmalloc_init(&dev->vb_vidq, &vivi_video_qops, - NULL, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_INTERLACED, - sizeof(struct vivi_buffer), dev, &dev->mutex); + /* initialize queue */ + q = &dev->vb_vidq; + memset(q, 0, sizeof(dev->vb_vidq)); + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; + q->drv_priv = dev; + q->buf_struct_size = sizeof(struct vivi_buffer); + q->ops = &vivi_video_qops; + q->mem_ops = &vb2_vmalloc_memops; + + vb2_queue_init(q); + + mutex_init(&dev->mutex); /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); @@ -1178,6 +1254,12 @@ static int __init vivi_create_instance(int inst) *vfd = vivi_template; vfd->debug = debug; vfd->v4l2_dev = &dev->v4l2_dev; + set_bit(V4L2_FL_USE_FH_PRIO, &vfd->flags); + + /* + * Provide a mutex to v4l2 core. It will be used to protect + * all fops and v4l2 ioctls. + */ vfd->lock = &dev->mutex; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); @@ -1200,6 +1282,7 @@ static int __init vivi_create_instance(int inst) rel_vdev: video_device_release(vfd); unreg_dev: + v4l2_ctrl_handler_free(hdl); v4l2_device_unregister(&dev->v4l2_dev); free_dev: kfree(dev); diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 91a01b3cdf8c..75301d10a838 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -28,6 +28,7 @@ #include <linux/videodev2.h> #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> +#include <media/v4l2-ctrls.h> MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); MODULE_AUTHOR("Laurent Pinchart"); @@ -44,16 +45,13 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct vpx3220 { struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; unsigned char reg[255]; v4l2_std_id norm; int ident; int input; int enable; - int bright; - int contrast; - int hue; - int sat; }; static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd) @@ -61,6 +59,11 @@ static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd) return container_of(sd, struct vpx3220, sd); } +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vpx3220, hdl)->sd; +} + static char *inputs[] = { "internal", "composite", "svideo" }; /* ----------------------------------------------------------------------- */ @@ -417,88 +420,26 @@ static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable) return 0; } -static int vpx3220_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_BRIGHTNESS: - v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); - break; - - case V4L2_CID_CONTRAST: - v4l2_ctrl_query_fill(qc, 0, 63, 1, 32); - break; - - case V4L2_CID_SATURATION: - v4l2_ctrl_query_fill(qc, 0, 4095, 1, 2048); - break; - - case V4L2_CID_HUE: - v4l2_ctrl_query_fill(qc, -512, 511, 1, 0); - break; - - default: - return -EINVAL; - } - return 0; -} - -static int vpx3220_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +static int vpx3220_s_ctrl(struct v4l2_ctrl *ctrl) { - struct vpx3220 *decoder = to_vpx3220(sd); + struct v4l2_subdev *sd = to_sd(ctrl); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ctrl->value = decoder->bright; - break; + vpx3220_write(sd, 0xe6, ctrl->val); + return 0; case V4L2_CID_CONTRAST: - ctrl->value = decoder->contrast; - break; + /* Bit 7 and 8 is for noise shaping */ + vpx3220_write(sd, 0xe7, ctrl->val + 192); + return 0; case V4L2_CID_SATURATION: - ctrl->value = decoder->sat; - break; + vpx3220_fp_write(sd, 0xa0, ctrl->val); + return 0; case V4L2_CID_HUE: - ctrl->value = decoder->hue; - break; - default: - return -EINVAL; + vpx3220_fp_write(sd, 0x1c, ctrl->val); + return 0; } - return 0; -} - -static int vpx3220_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct vpx3220 *decoder = to_vpx3220(sd); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - if (decoder->bright != ctrl->value) { - decoder->bright = ctrl->value; - vpx3220_write(sd, 0xe6, decoder->bright); - } - break; - case V4L2_CID_CONTRAST: - if (decoder->contrast != ctrl->value) { - /* Bit 7 and 8 is for noise shaping */ - decoder->contrast = ctrl->value; - vpx3220_write(sd, 0xe7, decoder->contrast + 192); - } - break; - case V4L2_CID_SATURATION: - if (decoder->sat != ctrl->value) { - decoder->sat = ctrl->value; - vpx3220_fp_write(sd, 0xa0, decoder->sat); - } - break; - case V4L2_CID_HUE: - if (decoder->hue != ctrl->value) { - decoder->hue = ctrl->value; - vpx3220_fp_write(sd, 0x1c, decoder->hue); - } - break; - default: - return -EINVAL; - } - return 0; + return -EINVAL; } static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) @@ -511,12 +452,20 @@ static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ide /* ----------------------------------------------------------------------- */ +static const struct v4l2_ctrl_ops vpx3220_ctrl_ops = { + .s_ctrl = vpx3220_s_ctrl, +}; + static const struct v4l2_subdev_core_ops vpx3220_core_ops = { .g_chip_ident = vpx3220_g_chip_ident, .init = vpx3220_init, - .g_ctrl = vpx3220_g_ctrl, - .s_ctrl = vpx3220_s_ctrl, - .queryctrl = vpx3220_queryctrl, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, .s_std = vpx3220_s_std, }; @@ -558,10 +507,24 @@ static int vpx3220_probe(struct i2c_client *client, decoder->norm = V4L2_STD_PAL; decoder->input = 0; decoder->enable = 1; - decoder->bright = 32768; - decoder->contrast = 32768; - decoder->hue = 32768; - decoder->sat = 32768; + v4l2_ctrl_handler_init(&decoder->hdl, 4); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_BRIGHTNESS, -128, 127, 1, 0); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, 32); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_SATURATION, 0, 4095, 1, 2048); + v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops, + V4L2_CID_HUE, -512, 511, 1, 0); + sd->ctrl_handler = &decoder->hdl; + if (decoder->hdl.error) { + int err = decoder->hdl.error; + + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); + return err; + } + v4l2_ctrl_handler_setup(&decoder->hdl); ver = i2c_smbus_read_byte_data(client, 0x00); pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + @@ -599,9 +562,11 @@ static int vpx3220_probe(struct i2c_client *client, static int vpx3220_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vpx3220 *decoder = to_vpx3220(sd); v4l2_device_unregister_subdev(sd); - kfree(to_vpx3220(sd)); + v4l2_ctrl_handler_free(&decoder->hdl); + kfree(decoder); return 0; } diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index fe8ef6419f83..9cedb1e69b58 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -35,6 +35,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-ctrls.h> +#include <media/wm8775.h> MODULE_DESCRIPTION("wm8775 driver"); MODULE_AUTHOR("Ulf Eklund, Hans Verkuil"); @@ -50,10 +51,16 @@ enum { TOT_REGS }; +#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */ +#define ALC_EN 0x100 /* R17: ALC enable */ + struct wm8775_state { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; struct v4l2_ctrl *mute; + struct v4l2_ctrl *vol; + struct v4l2_ctrl *bal; + struct v4l2_ctrl *loud; u8 input; /* Last selected input (0-0xf) */ }; @@ -85,6 +92,30 @@ static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val) return -1; } +static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly) +{ + struct wm8775_state *state = to_state(sd); + u8 vol_l, vol_r; + int muted = 0 != state->mute->val; + u16 volume = (u16)state->vol->val; + u16 balance = (u16)state->bal->val; + + /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */ + vol_l = (min(65536 - balance, 32768) * volume) >> 23; + vol_r = (min(balance, (u16)32768) * volume) >> 23; + + /* Mute */ + if (muted || quietly) + wm8775_write(sd, R21, 0x0c0 | state->input); + + wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */ + wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */ + + /* Un-mute */ + if (!muted) + wm8775_write(sd, R21, state->input); +} + static int wm8775_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) { @@ -102,25 +133,26 @@ static int wm8775_s_routing(struct v4l2_subdev *sd, state->input = input; if (!v4l2_ctrl_g_ctrl(state->mute)) return 0; - wm8775_write(sd, R21, 0x0c0); - wm8775_write(sd, R14, 0x1d4); - wm8775_write(sd, R15, 0x1d4); - wm8775_write(sd, R21, 0x100 + state->input); + if (!v4l2_ctrl_g_ctrl(state->vol)) + return 0; + if (!v4l2_ctrl_g_ctrl(state->bal)) + return 0; + wm8775_set_audio(sd, 1); return 0; } static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl) { struct v4l2_subdev *sd = to_sd(ctrl); - struct wm8775_state *state = to_state(sd); switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: - wm8775_write(sd, R21, 0x0c0); - wm8775_write(sd, R14, 0x1d4); - wm8775_write(sd, R15, 0x1d4); - if (!ctrl->val) - wm8775_write(sd, R21, 0x100 + state->input); + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + wm8775_set_audio(sd, 0); + return 0; + case V4L2_CID_AUDIO_LOUDNESS: + wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD); return 0; } return -EINVAL; @@ -144,16 +176,7 @@ static int wm8775_log_status(struct v4l2_subdev *sd) static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq) { - struct wm8775_state *state = to_state(sd); - - /* If I remove this, then it can happen that I have no - sound the first time I tune from static to a valid channel. - It's difficult to reproduce and is almost certainly related - to the zero cross detect circuit. */ - wm8775_write(sd, R21, 0x0c0); - wm8775_write(sd, R14, 0x1d4); - wm8775_write(sd, R15, 0x1d4); - wm8775_write(sd, R21, 0x100 + state->input); + wm8775_set_audio(sd, 0); return 0; } @@ -203,6 +226,13 @@ static int wm8775_probe(struct i2c_client *client, { struct wm8775_state *state; struct v4l2_subdev *sd; + int err; + bool is_nova_s = false; + + if (client->dev.platform_data) { + struct wm8775_platform_data *data = client->dev.platform_data; + is_nova_s = data->is_nova_s; + } /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -218,13 +248,18 @@ static int wm8775_probe(struct i2c_client *client, v4l2_i2c_subdev_init(sd, client, &wm8775_ops); state->input = 2; - v4l2_ctrl_handler_init(&state->hdl, 1); + v4l2_ctrl_handler_init(&state->hdl, 4); state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/ + state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768); + state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops, + V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1); sd->ctrl_handler = &state->hdl; - if (state->hdl.error) { - int err = state->hdl.error; - + err = state->hdl.error; + if (err) { v4l2_ctrl_handler_free(&state->hdl); kfree(state); return err; @@ -236,29 +271,44 @@ static int wm8775_probe(struct i2c_client *client, wm8775_write(sd, R23, 0x000); /* Disable zero cross detect timeout */ wm8775_write(sd, R7, 0x000); - /* Left justified, 24-bit mode */ + /* HPF enable, left justified, 24-bit (Philips) mode */ wm8775_write(sd, R11, 0x021); /* Master mode, clock ratio 256fs */ wm8775_write(sd, R12, 0x102); /* Powered up */ wm8775_write(sd, R13, 0x000); - /* ADC gain +2.5dB, enable zero cross */ - wm8775_write(sd, R14, 0x1d4); - /* ADC gain +2.5dB, enable zero cross */ - wm8775_write(sd, R15, 0x1d4); - /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ - wm8775_write(sd, R16, 0x1bf); - /* Enable gain control, use zero cross detection, - ALC hold time 42.6 ms */ - wm8775_write(sd, R17, 0x185); + + if (!is_nova_s) { + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R14, 0x1d4); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(sd, R15, 0x1d4); + /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ + wm8775_write(sd, R16, 0x1bf); + /* Enable gain control, use zero cross detection, + ALC hold time 42.6 ms */ + wm8775_write(sd, R17, 0x185); + } else { + /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */ + wm8775_write(sd, R16, 0x1bb); + /* Set ALC mode and hold time */ + wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD); + } /* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */ wm8775_write(sd, R18, 0x0a2); /* Enable noise gate, threshold -72dBfs */ wm8775_write(sd, R19, 0x005); - /* Transient window 4ms, lower PGA gain limit -1dB */ - wm8775_write(sd, R20, 0x07a); - /* LRBOTH = 1, use input 2. */ - wm8775_write(sd, R21, 0x102); + if (!is_nova_s) { + /* Transient window 4ms, lower PGA gain limit -1dB */ + wm8775_write(sd, R20, 0x07a); + /* LRBOTH = 1, use input 2. */ + wm8775_write(sd, R21, 0x102); + } else { + /* Transient window 4ms, ALC min gain -5dB */ + wm8775_write(sd, R20, 0x0fb); + + wm8775_set_audio(sd, 1); /* set volume/mute/mux */ + } return 0; } |