aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/common/saa7146_hlp.c2
-rw-r--r--drivers/media/dvb/bt8xx/bt878.c2
-rw-r--r--drivers/media/dvb/cinergyT2/cinergyT2.c2
-rw-r--r--drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c2
-rw-r--r--drivers/media/video/bt8xx/bttv-cards.c26
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c2
-rw-r--r--drivers/media/video/meye.c2
-rw-r--r--drivers/media/video/meye.h2
-rw-r--r--drivers/media/video/saa5246a.c4
-rw-r--r--drivers/media/video/saa5249.c4
-rw-r--r--drivers/media/video/usbvideo/vicam.c2
-rw-r--r--drivers/media/video/v4l2-common.c2
12 files changed, 26 insertions, 26 deletions
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index d2905720eb74..9c905399a233 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -312,7 +312,7 @@ static int sort_and_eliminate(u32* values, int* count)
return -EINVAL;
}
- /* bubble sort the first ´count´ items of the array ´values´ */
+ /* bubble sort the first @count items of the array @values */
for( top = *count; top > 0; top--) {
for( low = 0, high = 1; high < top; low++, high++) {
if( values[low] > values[high] ) {
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index eca602d9b3de..85e36a1d6d78 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -280,7 +280,7 @@ static irqreturn_t bt878_irq(int irq, void *dev_id)
if (!(astat = (stat & mask)))
return IRQ_NONE; /* this interrupt is not for me */
/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
- btwrite(astat, BT878_AINT_STAT); /* try to clear interupt condition */
+ btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */
if (astat & (BT878_ASCERR | BT878_AOCERR)) {
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 154a7ce7cb82..a05e5c182288 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -1,5 +1,5 @@
/*
- * TerraTec Cinergy T²/qanu USB2 DVB-T adapter.
+ * TerraTec Cinergy T²/qanu USB2 DVB-T adapter.
*
* Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
* Holger Waechtler <holger@qanu.de>
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 288e79f2cb0f..7902ae1d9a18 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -128,7 +128,7 @@ struct ttusb {
struct dvb_frontend* fe;
};
-/* ugly workaround ... don't know why it's neccessary to read */
+/* ugly workaround ... don't know why it's necessary to read */
/* all result codes. */
#define DEBUG 0
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index dd6a7d68b07f..3abd9fa54d2c 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -1259,7 +1259,7 @@ struct tvcard bttv_tvcards[] = {
.has_radio = 1,
},
[BTTV_BOARD_LIFETEC_9415] = {
- /* Tim Röstermundt <rosterm@uni-muenster.de>
+ /* Tim Röstermundt <rosterm@uni-muenster.de>
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
@@ -2824,7 +2824,7 @@ struct tvcard bttv_tvcards[] = {
},
/* ---- card 0x8b ---------------------------------- */
[BTTV_BOARD_PV_M4900] = {
- /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
+ /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
.video_inputs = 3,
.audio_inputs = 1,
@@ -4709,18 +4709,18 @@ adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
- * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
- * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
- * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
- * GPIO[8] - - P3[5] (microcontroler)
- * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
- * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
- * GPINTR - - P3[4] (microcontroler)
+ * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
+ * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
+ * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
+ * GPIO[8] - - P3[5] (microcontroller)
+ * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
+ * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
+ * GPINTR - - P3[4] (microcontroller)
*
- * The microcontroler is a 80C32 like. It should be possible to change xpoint
- * configuration either directly (as we are doing) or using the microcontroler
+ * The microcontroller is a 80C32 like. It should be possible to change xpoint
+ * configuration either directly (as we are doing) or using the microcontroller
* which is also wired to I2C interface. I have no further info on the
- * microcontroler features, one would need to disassembly the firmware.
+ * microcontroller features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
@@ -4788,7 +4788,7 @@ static void tibetCS16_init(struct bttv *btv)
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
- * logic on the board uses logical numbers for the 4 controlers, but
+ * logic on the board uses logical numbers for the 4 controllers, but
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index b8d5327c438d..e467682aabd7 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -907,7 +907,7 @@ static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_form
/* stop io in case it is already in progress */
if (dev->stream == STREAM_ON) {
- em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n");
+ em28xx_videodbg("VIDIOC_SET_FMT: interrupting stream\n");
if ((ret = em28xx_stream_interrupt(dev)))
return ret;
}
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 7533fc203319..69283926a8dc 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
*
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
*
* Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
*
diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h
index 323d0074120d..d535748df445 100644
--- a/drivers/media/video/meye.h
+++ b/drivers/media/video/meye.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
*
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
*
* Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
*
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index e20aa3612a7c..ad0232935df6 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -196,10 +196,10 @@ static int i2c_senddata(struct saa5246a_device *t, ...)
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
-/* Get count number of bytes from I²C-device at address adr, store them in buf.
+/* Get count number of bytes from I²C-device at address adr, store them in buf.
* Start & stop handshaking is done by this routine, ack will be sent after the
* last byte to inhibit further sending of data. If uaccess is 'true', data is
- * written to user-space with put_user. Returns -1 if I²C-device didn't send
+ * written to user-space with put_user. Returns -1 if I²C-device didn't send
* acknowledge, 0 otherwise
*/
static int i2c_getdata(struct saa5246a_device *t, int count, u8 *buf)
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 17f1e2e9a66b..94bb59a32b17 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -291,10 +291,10 @@ static int i2c_senddata(struct saa5249_device *t, ...)
return i2c_sendbuf(t, buf[0], ct-1, buf+1);
}
-/* Get count number of bytes from I²C-device at address adr, store them in buf. Start & stop
+/* Get count number of bytes from I²C-device at address adr, store them in buf. Start & stop
* handshaking is done by this routine, ack will be sent after the last byte to inhibit further
* sending of data. If uaccess is 'true', data is written to user-space with put_user.
- * Returns -1 if I²C-device didn't send acknowledge, 0 otherwise
+ * Returns -1 if I²C-device didn't send acknowledge, 0 otherwise
*/
static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf)
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index ff555129c82f..db3c9e3deb26 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -955,7 +955,7 @@ read_frame(struct vicam_camera *cam, int framenum)
request[7] = realShutter >> 8;
}
- // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
+ // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0
request[8] = 0;
// bytes 9-15 do not seem to affect exposure or image quality
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index c3440b280d20..321249240d05 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -37,7 +37,7 @@
* Video4linux 1/2 integration by Justin Schoeman
* <justin@suntiger.ee.up.ac.za>
* 2.4 PROCFS support ported from 2.4 kernels by
- * Iñaki García Etxebarria <garetxe@euskalnet.net>
+ * Iñaki García Etxebarria <garetxe@euskalnet.net>
* Makefile fix by "W. Michael Petullo" <mike@flyn.org>
* 2.4 devfs support ported from 2.4 kernels by
* Dan Merillat <dan@merillat.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.