diff options
Diffstat (limited to 'drivers/memory/pl353-smc.c')
| -rw-r--r-- | drivers/memory/pl353-smc.c | 314 |
1 files changed, 10 insertions, 304 deletions
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c index 9c0a28416777..925d856663ac 100644 --- a/drivers/memory/pl353-smc.c +++ b/drivers/memory/pl353-smc.c @@ -8,263 +8,22 @@ */ #include <linux/clk.h> -#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/pl353-smc.h> #include <linux/amba/bus.h> -/* Register definitions */ -#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */ -#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */ -#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */ -#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */ -#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */ -#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */ -#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */ -#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */ -#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */ -#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */ - -/* Controller status register specific constants */ -#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6 - -/* Clear configuration register specific constants */ -#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10 -#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40 -#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2 -#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \ - PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \ - PL353_SMC_CFG_CLR_INT_DIS_1) - -/* Set cycles register specific constants */ -#define PL353_SMC_SET_CYCLES_T0_MASK 0xF -#define PL353_SMC_SET_CYCLES_T0_SHIFT 0 -#define PL353_SMC_SET_CYCLES_T1_MASK 0xF -#define PL353_SMC_SET_CYCLES_T1_SHIFT 4 -#define PL353_SMC_SET_CYCLES_T2_MASK 0x7 -#define PL353_SMC_SET_CYCLES_T2_SHIFT 8 -#define PL353_SMC_SET_CYCLES_T3_MASK 0x7 -#define PL353_SMC_SET_CYCLES_T3_SHIFT 11 -#define PL353_SMC_SET_CYCLES_T4_MASK 0x7 -#define PL353_SMC_SET_CYCLES_T4_SHIFT 14 -#define PL353_SMC_SET_CYCLES_T5_MASK 0x7 -#define PL353_SMC_SET_CYCLES_T5_SHIFT 17 -#define PL353_SMC_SET_CYCLES_T6_MASK 0xF -#define PL353_SMC_SET_CYCLES_T6_SHIFT 20 - -/* ECC status register specific constants */ -#define PL353_SMC_ECC_STATUS_BUSY BIT(6) -#define PL353_SMC_ECC_REG_SIZE_OFFS 4 - -/* ECC memory config register specific constants */ -#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC -#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2 -#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0x3 - -#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \ - (2 << 21)) /* UpdateRegs operation */ - -#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \ - (0 << 8) | /* Read command */ \ - (0x30 << 16) | /* Read End command */ \ - (1 << 24)) /* Read End command calid */ - -#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \ - (5 << 8) | /* Read col change cmd */ \ - (0xE0 << 16) | /* Read col change end cmd */ \ - (1 << 24)) /* Read col change end cmd valid */ -#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ) /** * struct pl353_smc_data - Private smc driver structure * @memclk: Pointer to the peripheral clock - * @aclk: Pointer to the APER clock + * @aclk: Pointer to the AXI peripheral clock */ struct pl353_smc_data { struct clk *memclk; struct clk *aclk; }; -/* SMC virtual register base */ -static void __iomem *pl353_smc_base; - -/** - * pl353_smc_set_buswidth - Set memory buswidth - * @bw: Memory buswidth (8 | 16) - * Return: 0 on success or negative errno. - */ -int pl353_smc_set_buswidth(unsigned int bw) -{ - if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16) - return -EINVAL; - - writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS); - writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + - PL353_SMC_DIRECT_CMD_OFFS); - - return 0; -} -EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth); - -/** - * pl353_smc_set_cycles - Set memory timing parameters - * @timings: NAND controller timing parameters - * - * Sets NAND chip specific timing parameters. - */ -void pl353_smc_set_cycles(u32 timings[]) -{ - /* - * Set write pulse timing. This one is easy to extract: - * - * NWE_PULSE = tWP - */ - timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK; - timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) << - PL353_SMC_SET_CYCLES_T1_SHIFT; - timings[2] = (timings[2] & PL353_SMC_SET_CYCLES_T2_MASK) << - PL353_SMC_SET_CYCLES_T2_SHIFT; - timings[3] = (timings[3] & PL353_SMC_SET_CYCLES_T3_MASK) << - PL353_SMC_SET_CYCLES_T3_SHIFT; - timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) << - PL353_SMC_SET_CYCLES_T4_SHIFT; - timings[5] = (timings[5] & PL353_SMC_SET_CYCLES_T5_MASK) << - PL353_SMC_SET_CYCLES_T5_SHIFT; - timings[6] = (timings[6] & PL353_SMC_SET_CYCLES_T6_MASK) << - PL353_SMC_SET_CYCLES_T6_SHIFT; - timings[0] |= timings[1] | timings[2] | timings[3] | - timings[4] | timings[5] | timings[6]; - - writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS); - writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + - PL353_SMC_DIRECT_CMD_OFFS); -} -EXPORT_SYMBOL_GPL(pl353_smc_set_cycles); - -/** - * pl353_smc_ecc_is_busy - Read ecc busy flag - * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle - */ -bool pl353_smc_ecc_is_busy(void) -{ - return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) & - PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY); -} -EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy); - -/** - * pl353_smc_get_ecc_val - Read ecc_valueN registers - * @ecc_reg: Index of the ecc_value reg (0..3) - * Return: the content of the requested ecc_value register. - * - * There are four valid ecc_value registers. The argument is truncated to stay - * within this valid boundary. - */ -u32 pl353_smc_get_ecc_val(int ecc_reg) -{ - u32 addr, reg; - - addr = PL353_SMC_ECC_VALUE0_OFFS + - (ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS); - reg = readl(pl353_smc_base + addr); - - return reg; -} -EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val); - -/** - * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit - * Return: the raw_int_status1 bit from the memc_status register - */ -int pl353_smc_get_nand_int_status_raw(void) -{ - u32 reg; - - reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS); - reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT; - reg &= 1; - - return reg; -} -EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw); - -/** - * pl353_smc_clr_nand_int - Clear NAND interrupt - */ -void pl353_smc_clr_nand_int(void) -{ - writel(PL353_SMC_CFG_CLR_INT_CLR_1, - pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); -} -EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int); - -/** - * pl353_smc_set_ecc_mode - Set SMC ECC mode - * @mode: ECC mode (BYPASS, APB, MEM) - * Return: 0 on success or negative errno. - */ -int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode) -{ - u32 reg; - int ret = 0; - - switch (mode) { - case PL353_SMC_ECCMODE_BYPASS: - case PL353_SMC_ECCMODE_APB: - case PL353_SMC_ECCMODE_MEM: - - reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); - reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK; - reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT; - writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); - - break; - default: - ret = -EINVAL; - } - - return ret; -} -EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode); - -/** - * pl353_smc_set_ecc_pg_size - Set SMC ECC page size - * @pg_sz: ECC page size - * Return: 0 on success or negative errno. - */ -int pl353_smc_set_ecc_pg_size(unsigned int pg_sz) -{ - u32 reg, sz; - - switch (pg_sz) { - case 0: - sz = 0; - break; - case SZ_512: - sz = 1; - break; - case SZ_1K: - sz = 2; - break; - case SZ_2K: - sz = 3; - break; - default: - return -EINVAL; - } - - reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); - reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK; - reg |= sz; - writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); - - return 0; -} -EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size); - static int __maybe_unused pl353_smc_suspend(struct device *dev) { struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); @@ -277,8 +36,8 @@ static int __maybe_unused pl353_smc_suspend(struct device *dev) static int __maybe_unused pl353_smc_resume(struct device *dev) { - int ret; struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); + int ret; ret = clk_enable(pl353_smc->aclk); if (ret) { @@ -296,77 +55,31 @@ static int __maybe_unused pl353_smc_resume(struct device *dev) return ret; } -static struct amba_driver pl353_smc_driver; - static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend, pl353_smc_resume); -/** - * pl353_smc_init_nand_interface - Initialize the NAND interface - * @adev: Pointer to the amba_device struct - * @nand_node: Pointer to the pl353_nand device_node struct - */ -static void pl353_smc_init_nand_interface(struct amba_device *adev, - struct device_node *nand_node) -{ - unsigned long timeout; - - pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8); - writel(PL353_SMC_CFG_CLR_INT_CLR_1, - pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); - writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + - PL353_SMC_DIRECT_CMD_OFFS); - - timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT; - /* Wait till the ECC operation is complete */ - do { - if (pl353_smc_ecc_is_busy()) - cpu_relax(); - else - break; - } while (!time_after_eq(jiffies, timeout)); - - if (time_after_eq(jiffies, timeout)) - return; - - writel(PL353_NAND_ECC_CMD1, - pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS); - writel(PL353_NAND_ECC_CMD2, - pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS); -} - static const struct of_device_id pl353_smc_supported_children[] = { { .compatible = "cfi-flash" }, { .compatible = "arm,pl353-nand-r2p1", - .data = pl353_smc_init_nand_interface }, {} }; static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id) { + struct device_node *of_node = adev->dev.of_node; + const struct of_device_id *match = NULL; struct pl353_smc_data *pl353_smc; struct device_node *child; - struct resource *res; int err; - struct device_node *of_node = adev->dev.of_node; - static void (*init)(struct amba_device *adev, - struct device_node *nand_node); - const struct of_device_id *match = NULL; pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL); if (!pl353_smc) return -ENOMEM; - /* Get the NAND controller virtual address */ - res = &adev->res; - pl353_smc_base = devm_ioremap_resource(&adev->dev, res); - if (IS_ERR(pl353_smc_base)) - return PTR_ERR(pl353_smc_base); - pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk"); if (IS_ERR(pl353_smc->aclk)) { dev_err(&adev->dev, "aclk clock not found.\n"); @@ -388,15 +101,11 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id) err = clk_prepare_enable(pl353_smc->memclk); if (err) { dev_err(&adev->dev, "Unable to enable memory clock.\n"); - goto out_clk_dis_aper; + goto disable_axi_clk; } amba_set_drvdata(adev, pl353_smc); - /* clear interrupts */ - writel(PL353_SMC_CFG_CLR_DEFAULT_MASK, - pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); - /* Find compatible children. Only a single child is supported */ for_each_available_child_of_node(of_node, child) { match = of_match_node(pl353_smc_supported_children, child); @@ -408,19 +117,16 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id) } if (!match) { dev_err(&adev->dev, "no matching children\n"); - goto out_clk_disable; + goto disable_mem_clk; } - init = match->data; - if (init) - init(adev, child); of_platform_device_create(child, NULL, &adev->dev); return 0; -out_clk_disable: +disable_mem_clk: clk_disable_unprepare(pl353_smc->memclk); -out_clk_dis_aper: +disable_axi_clk: clk_disable_unprepare(pl353_smc->aclk); return err; @@ -436,8 +142,8 @@ static void pl353_smc_remove(struct amba_device *adev) static const struct amba_id pl353_ids[] = { { - .id = 0x00041353, - .mask = 0x000fffff, + .id = 0x00041353, + .mask = 0x000fffff, }, { 0, 0 }, }; |