aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-pci.c')
-rw-r--r--drivers/mmc/host/sdhci-pci.c161
1 files changed, 155 insertions, 6 deletions
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 3d9c2460d437..0dc905b20eee 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -176,6 +176,74 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
};
+/* O2Micro extra registers */
+#define O2_SD_LOCK_WP 0xD3
+#define O2_SD_MULTI_VCC3V 0xEE
+#define O2_SD_CLKREQ 0xEC
+#define O2_SD_CAPS 0xE0
+#define O2_SD_ADMA1 0xE2
+#define O2_SD_ADMA2 0xE7
+#define O2_SD_INF_MOD 0xF1
+
+static int o2_probe(struct sdhci_pci_chip *chip)
+{
+ int ret;
+ u8 scratch;
+
+ switch (chip->pdev->device) {
+ case PCI_DEVICE_ID_O2_8220:
+ case PCI_DEVICE_ID_O2_8221:
+ case PCI_DEVICE_ID_O2_8320:
+ case PCI_DEVICE_ID_O2_8321:
+ /* This extra setup is required due to broken ADMA. */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ /* Set Multi 3 to VCC3V# */
+ pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
+
+ /* Disable CLK_REQ# support after media DET */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x20;
+ pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
+
+ /* Choose capabilities, enable SDMA. We have to write 0x01
+ * to the capabilities register first to unlock it.
+ */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x01;
+ pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
+ pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
+
+ /* Disable ADMA1/2 */
+ pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
+ pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
+
+ /* Disable the infinite transfer mode */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x08;
+ pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
+
+ /* Lock WP */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ }
+
+ return 0;
+}
+
static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
{
u8 scratch;
@@ -204,6 +272,7 @@ static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
static int jmicron_probe(struct sdhci_pci_chip *chip)
{
int ret;
+ u16 mmcdev = 0;
if (chip->pdev->revision == 0) {
chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
@@ -225,12 +294,17 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
* 2. The MMC interface has a lower subfunction number
* than the SD interface.
*/
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD)
+ mmcdev = PCI_DEVICE_ID_JMICRON_JMB38X_MMC;
+ else if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_SD)
+ mmcdev = PCI_DEVICE_ID_JMICRON_JMB388_ESD;
+
+ if (mmcdev) {
struct pci_dev *sd_dev;
sd_dev = NULL;
while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON,
- PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) {
+ mmcdev, sd_dev)) != NULL) {
if ((PCI_SLOT(chip->pdev->devfn) ==
PCI_SLOT(sd_dev->devfn)) &&
(chip->pdev->bus == sd_dev->bus))
@@ -290,13 +364,25 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot)
slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
}
+ /* JM388 MMC doesn't support 1.8V while SD supports it */
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
+ slot->host->ocr_avail_sd = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 |
+ MMC_VDD_165_195; /* allow 1.8V */
+ slot->host->ocr_avail_mmc = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_29_30 | MMC_VDD_30_31; /* no 1.8V for MMC */
+ }
+
/*
* The secondary interface requires a bit set to get the
* interrupts.
*/
- if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
jmicron_enable_mmc(slot->host, 1);
+ slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST;
+
return 0;
}
@@ -305,7 +391,8 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
if (dead)
return;
- if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC)
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD)
jmicron_enable_mmc(slot->host, 0);
}
@@ -313,7 +400,8 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
{
int i;
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
for (i = 0;i < chip->num_slots;i++)
jmicron_enable_mmc(chip->slots[i]->host, 0);
}
@@ -325,7 +413,8 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
{
int ret, i;
- if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) {
+ if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC ||
+ chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB388_ESD) {
for (i = 0;i < chip->num_slots;i++)
jmicron_enable_mmc(chip->slots[i]->host, 1);
}
@@ -339,6 +428,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
return 0;
}
+static const struct sdhci_pci_fixes sdhci_o2 = {
+ .probe = o2_probe,
+};
+
static const struct sdhci_pci_fixes sdhci_jmicron = {
.probe = jmicron_probe,
@@ -510,6 +603,22 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
},
{
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB388_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_JMICRON,
+ .device = PCI_DEVICE_ID_JMICRON_JMB388_ESD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_jmicron,
+ },
+
+ {
.vendor = PCI_VENDOR_ID_SYSKONNECT,
.device = 0x8000,
.subvendor = PCI_ANY_ID,
@@ -589,6 +698,46 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.driver_data = (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
},
+ {
+ .vendor = PCI_VENDOR_ID_O2,
+ .device = PCI_DEVICE_ID_O2_8120,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_o2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_O2,
+ .device = PCI_DEVICE_ID_O2_8220,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_o2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_O2,
+ .device = PCI_DEVICE_ID_O2_8221,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_o2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_O2,
+ .device = PCI_DEVICE_ID_O2_8320,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_o2,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_O2,
+ .device = PCI_DEVICE_ID_O2_8321,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_o2,
+ },
+
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.