diff options
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 854 |
1 files changed, 786 insertions, 68 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5d20661bc357..58d5436ff649 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -38,13 +38,16 @@ #define SDHCI_USE_LEDS_CLASS #endif +#define MAX_TUNING_LOOP 40 + static unsigned int debug_quirks = 0; -static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *); static void sdhci_finish_data(struct sdhci_host *); static void sdhci_send_command(struct sdhci_host *, struct mmc_command *); static void sdhci_finish_command(struct sdhci_host *); +static int sdhci_execute_tuning(struct mmc_host *mmc); +static void sdhci_tuning_timer(unsigned long data); static void sdhci_dumpregs(struct sdhci_host *host) { @@ -84,6 +87,8 @@ static void sdhci_dumpregs(struct sdhci_host *host) printk(KERN_DEBUG DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n", sdhci_readw(host, SDHCI_COMMAND), sdhci_readl(host, SDHCI_MAX_CURRENT)); + printk(KERN_DEBUG DRIVER_NAME ": Host ctl2: 0x%08x\n", + sdhci_readw(host, SDHCI_HOST_CONTROL2)); if (host->flags & SDHCI_USE_ADMA) printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n", @@ -157,6 +162,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) ier = sdhci_readl(host, SDHCI_INT_ENABLE); + if (host->ops->platform_reset_enter) + host->ops->platform_reset_enter(host, mask); + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); if (mask & SDHCI_RESET_ALL) @@ -177,6 +185,9 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) mdelay(1); } + if (host->ops->platform_reset_exit) + host->ops->platform_reset_exit(host, mask); + if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier); } @@ -591,9 +602,10 @@ static void sdhci_adma_table_post(struct sdhci_host *host, data->sg_len, direction); } -static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) { u8 count; + struct mmc_data *data = cmd->data; unsigned target_timeout, current_timeout; /* @@ -605,9 +617,16 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) return 0xE; + /* Unspecified timeout, assume max */ + if (!data && !cmd->cmd_timeout_ms) + return 0xE; + /* timeout in us */ - target_timeout = data->timeout_ns / 1000 + - data->timeout_clks / host->clock; + if (!data) + target_timeout = cmd->cmd_timeout_ms * 1000; + else + target_timeout = data->timeout_ns / 1000 + + data->timeout_clks / host->clock; if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) host->timeout_clk = host->clock / 1000; @@ -622,6 +641,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) * => * (1) / (2) > 2^6 */ + BUG_ON(!host->timeout_clk); count = 0; current_timeout = (1 << 13) * 1000 / host->timeout_clk; while (current_timeout < target_timeout) { @@ -632,8 +652,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) } if (count >= 0xF) { - printk(KERN_WARNING "%s: Too large timeout requested!\n", - mmc_hostname(host->mmc)); + printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n", + mmc_hostname(host->mmc), cmd->opcode); count = 0xE; } @@ -651,15 +671,21 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) sdhci_clear_set_irqs(host, dma_irqs, pio_irqs); } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) { u8 count; u8 ctrl; + struct mmc_data *data = cmd->data; int ret; WARN_ON(host->data); - if (data == NULL) + if (data || (cmd->flags & MMC_RSP_BUSY)) { + count = sdhci_calc_timeout(host, cmd); + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + } + + if (!data) return; /* Sanity checks */ @@ -669,9 +695,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) host->data = data; host->data_early = 0; - - count = sdhci_calc_timeout(host, data); - sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + host->data->bytes_xfered = 0; if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) host->flags |= SDHCI_REQ_USE_DMA; @@ -807,15 +831,17 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) sdhci_set_transfer_irqs(host); - /* We do not handle DMA boundaries, so set it to max (512 KiB) */ - sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE); + /* Set the DMA boundary value and block size */ + sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, + data->blksz), SDHCI_BLOCK_SIZE); sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); } static void sdhci_set_transfer_mode(struct sdhci_host *host, - struct mmc_data *data) + struct mmc_command *cmd) { u16 mode; + struct mmc_data *data = cmd->data; if (data == NULL) return; @@ -823,12 +849,20 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, WARN_ON(!host->data); mode = SDHCI_TRNS_BLK_CNT_EN; - if (data->blocks > 1) { - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) - mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12; - else - mode |= SDHCI_TRNS_MULTI; + if (mmc_op_multi(cmd->opcode) || data->blocks > 1) { + mode |= SDHCI_TRNS_MULTI; + /* + * If we are sending CMD23, CMD12 never gets sent + * on successful completion (so no Auto-CMD12). + */ + if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) + mode |= SDHCI_TRNS_AUTO_CMD12; + else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) { + mode |= SDHCI_TRNS_AUTO_CMD23; + sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2); + } } + if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; if (host->flags & SDHCI_REQ_USE_DMA) @@ -868,7 +902,15 @@ static void sdhci_finish_data(struct sdhci_host *host) else data->bytes_xfered = data->blksz * data->blocks; - if (data->stop) { + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + /* * The controller needs a reset of internal state machines * upon error conditions. @@ -920,11 +962,11 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) host->cmd = cmd; - sdhci_prepare_data(host, cmd->data); + sdhci_prepare_data(host, cmd); sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); - sdhci_set_transfer_mode(host, cmd->data); + sdhci_set_transfer_mode(host, cmd); if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) { printk(KERN_ERR "%s: Unsupported response type!\n", @@ -947,7 +989,9 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) flags |= SDHCI_CMD_CRC; if (cmd->flags & MMC_RSP_OPCODE) flags |= SDHCI_CMD_INDEX; - if (cmd->data) + + /* CMD19 is special in that the Data Present Select should be set */ + if (cmd->data || (cmd->opcode == MMC_SEND_TUNING_BLOCK)) flags |= SDHCI_CMD_DATA; sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); @@ -977,19 +1021,27 @@ static void sdhci_finish_command(struct sdhci_host *host) host->cmd->error = 0; - if (host->data && host->data_early) - sdhci_finish_data(host); + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + sdhci_send_command(host, host->mrq->cmd); + } else { - if (!host->cmd->data) - tasklet_schedule(&host->finish_tasklet); + /* Processed actual command. */ + if (host->data && host->data_early) + sdhci_finish_data(host); - host->cmd = NULL; + if (!host->cmd->data) + tasklet_schedule(&host->finish_tasklet); + + host->cmd = NULL; + } } static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { - int div; - u16 clk; + int div = 0; /* Initialized for compiler warning */ + u16 clk = 0; unsigned long timeout; if (clock == host->clock) @@ -1007,14 +1059,45 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) goto out; if (host->version >= SDHCI_SPEC_300) { - /* Version 3.00 divisors must be a multiple of 2. */ - if (host->max_clk <= clock) - div = 1; - else { - for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) { - if ((host->max_clk / div) <= clock) - break; + /* + * Check if the Host Controller supports Programmable Clock + * Mode. + */ + if (host->clk_mul) { + u16 ctrl; + + /* + * We need to figure out whether the Host Driver needs + * to select Programmable Clock Mode, or the value can + * be set automatically by the Host Controller based on + * the Preset Value registers. + */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + for (div = 1; div <= 1024; div++) { + if (((host->max_clk * host->clk_mul) / + div) <= clock) + break; + } + /* + * Set Programmable Clock Mode in the Clock + * Control register. + */ + clk = SDHCI_PROG_CLOCK_MODE; + div--; } + } else { + /* Version 3.00 divisors must be a multiple of 2. */ + if (host->max_clk <= clock) + div = 1; + else { + for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; + div += 2) { + if ((host->max_clk / div) <= clock) + break; + } + } + div >>= 1; } } else { /* Version 2.00 divisors must be a power of 2. */ @@ -1022,10 +1105,10 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) if ((host->max_clk / div) <= clock) break; } + div >>= 1; } - div >>= 1; - clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; + clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) << SDHCI_DIVIDER_HI_SHIFT; clk |= SDHCI_CLOCK_INT_EN; @@ -1131,7 +1214,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) #ifndef SDHCI_USE_LEDS_CLASS sdhci_activate_led(host); #endif - if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) { + + /* + * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED + * requests if Auto-CMD12 is enabled. + */ + if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) { if (mrq->stop) { mrq->data->stop = NULL; mrq->stop = NULL; @@ -1150,8 +1238,30 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) if (!present || host->flags & SDHCI_DEVICE_DEAD) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); - } else - sdhci_send_command(host, mrq->cmd); + } else { + u32 present_state; + + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + /* + * Check if the re-tuning timer has already expired and there + * is no on-going data transfer. If so, we need to execute + * tuning procedure before sending command. + */ + if ((host->flags & SDHCI_NEEDS_RETUNING) && + !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { + spin_unlock_irqrestore(&host->lock, flags); + sdhci_execute_tuning(mmc); + spin_lock_irqsave(&host->lock, flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; + } + + if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23)) + sdhci_send_command(host, mrq->sbc); + else + sdhci_send_command(host, mrq->cmd); + } mmiowb(); spin_unlock_irqrestore(&host->lock, flags); @@ -1222,7 +1332,84 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) else ctrl &= ~SDHCI_CTRL_HISPD; - sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + if (host->version >= SDHCI_SPEC_300) { + u16 clk, ctrl_2; + unsigned int clock; + + /* In case of UHS-I modes, set High Speed Enable */ + if ((ios->timing == MMC_TIMING_UHS_SDR50) || + (ios->timing == MMC_TIMING_UHS_SDR104) || + (ios->timing == MMC_TIMING_UHS_DDR50) || + (ios->timing == MMC_TIMING_UHS_SDR25) || + (ios->timing == MMC_TIMING_UHS_SDR12)) + ctrl |= SDHCI_CTRL_HISPD; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + /* + * We only need to set Driver Strength if the + * preset value enable is not set. + */ + ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK; + if (ios->drv_type == MMC_SET_DRIVER_TYPE_A) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A; + else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C) + ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C; + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + } else { + /* + * According to SDHC Spec v3.00, if the Preset Value + * Enable in the Host Control 2 register is set, we + * need to reset SD Clock Enable before changing High + * Speed Enable to avoid generating clock gliches. + */ + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + + /* Re-enable SD Clock */ + clock = host->clock; + host->clock = 0; + sdhci_set_clock(host, clock); + } + + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + if (host->ops->set_uhs_signaling) + host->ops->set_uhs_signaling(host, ios->timing); + else { + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if (ios->timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (ios->timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (ios->timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if (ios->timing == MMC_TIMING_UHS_SDR104) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (ios->timing == MMC_TIMING_UHS_DDR50) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + } + + /* Re-enable SD Clock */ + clock = host->clock; + host->clock = 0; + sdhci_set_clock(host, clock); + } else + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); /* * Some (ENE) controllers go apeshit on some ios operation, @@ -1237,14 +1424,11 @@ out: spin_unlock_irqrestore(&host->lock, flags); } -static int sdhci_get_ro(struct mmc_host *mmc) +static int check_ro(struct sdhci_host *host) { - struct sdhci_host *host; unsigned long flags; int is_readonly; - host = mmc_priv(mmc); - spin_lock_irqsave(&host->lock, flags); if (host->flags & SDHCI_DEVICE_DEAD) @@ -1262,6 +1446,29 @@ static int sdhci_get_ro(struct mmc_host *mmc) !is_readonly : is_readonly; } +#define SAMPLE_COUNT 5 + +static int sdhci_get_ro(struct mmc_host *mmc) +{ + struct sdhci_host *host; + int i, ro_count; + + host = mmc_priv(mmc); + + if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT)) + return check_ro(host); + + ro_count = 0; + for (i = 0; i < SAMPLE_COUNT; i++) { + if (check_ro(host)) { + if (++ro_count > SAMPLE_COUNT / 2) + return 1; + } + msleep(30); + } + return 0; +} + static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct sdhci_host *host; @@ -1284,11 +1491,322 @@ out: spin_unlock_irqrestore(&host->lock, flags); } +static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host; + u8 pwr; + u16 clk, ctrl; + u32 present_state; + + host = mmc_priv(mmc); + + /* + * Signal Voltage Switching is only applicable for Host Controllers + * v3.00 and above. + */ + if (host->version < SDHCI_SPEC_300) + return 0; + + /* + * We first check whether the request is to set signalling voltage + * to 3.3V. If so, we change the voltage to 3.3V and return quickly. + */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + /* Set 1.8V Signal Enable in the Host Control2 register to 0 */ + ctrl &= ~SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* Wait for 5ms */ + usleep_range(5000, 5500); + + /* 3.3V regulator output should be stable within 5 ms */ + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_VDD_180)) + return 0; + else { + printk(KERN_INFO DRIVER_NAME ": Switching to 3.3V " + "signalling voltage failed\n"); + return -EIO; + } + } else if (!(ctrl & SDHCI_CTRL_VDD_180) && + (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) { + /* Stop SDCLK */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Check whether DAT[3:0] is 0000 */ + present_state = sdhci_readl(host, SDHCI_PRESENT_STATE); + if (!((present_state & SDHCI_DATA_LVL_MASK) >> + SDHCI_DATA_LVL_SHIFT)) { + /* + * Enable 1.8V Signal Enable in the Host Control2 + * register + */ + ctrl |= SDHCI_CTRL_VDD_180; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* Wait for 5ms */ + usleep_range(5000, 5500); + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (ctrl & SDHCI_CTRL_VDD_180) { + /* Provide SDCLK again and wait for 1ms*/ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + usleep_range(1000, 1500); + + /* + * If DAT[3:0] level is 1111b, then the card + * was successfully switched to 1.8V signaling. + */ + present_state = sdhci_readl(host, + SDHCI_PRESENT_STATE); + if ((present_state & SDHCI_DATA_LVL_MASK) == + SDHCI_DATA_LVL_MASK) + return 0; + } + } + + /* + * If we are here, that means the switch to 1.8V signaling + * failed. We power cycle the card, and retry initialization + * sequence by setting S18R to 0. + */ + pwr = sdhci_readb(host, SDHCI_POWER_CONTROL); + pwr &= ~SDHCI_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + /* Wait for 1ms as per the spec */ + usleep_range(1000, 1500); + pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); + + printk(KERN_INFO DRIVER_NAME ": Switching to 1.8V signalling " + "voltage failed, retrying with S18R set to 0\n"); + return -EAGAIN; + } else + /* No signal voltage switch required */ + return 0; +} + +static int sdhci_execute_tuning(struct mmc_host *mmc) +{ + struct sdhci_host *host; + u16 ctrl; + u32 ier; + int tuning_loop_counter = MAX_TUNING_LOOP; + unsigned long timeout; + int err = 0; + + host = mmc_priv(mmc); + + disable_irq(host->irq); + spin_lock(&host->lock); + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* + * Host Controller needs tuning only in case of SDR104 mode + * and for SDR50 mode when Use Tuning for SDR50 is set in + * Capabilities register. + */ + if (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR104) || + (((ctrl & SDHCI_CTRL_UHS_MASK) == SDHCI_CTRL_UHS_SDR50) && + (host->flags & SDHCI_SDR50_NEEDS_TUNING))) + ctrl |= SDHCI_CTRL_EXEC_TUNING; + else { + spin_unlock(&host->lock); + enable_irq(host->irq); + return 0; + } + + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + /* + * As per the Host Controller spec v3.00, tuning command + * generates Buffer Read Ready interrupt, so enable that. + * + * Note: The spec clearly says that when tuning sequence + * is being performed, the controller does not generate + * interrupts other than Buffer Read Ready interrupt. But + * to make sure we don't hit a controller bug, we _only_ + * enable Buffer Read Ready interrupt here. + */ + ier = sdhci_readl(host, SDHCI_INT_ENABLE); + sdhci_clear_set_irqs(host, ier, SDHCI_INT_DATA_AVAIL); + + /* + * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number + * of loops reaches 40 times or a timeout of 150ms occurs. + */ + timeout = 150; + do { + struct mmc_command cmd = {0}; + struct mmc_request mrq = {0}; + + if (!tuning_loop_counter && !timeout) + break; + + cmd.opcode = MMC_SEND_TUNING_BLOCK; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.retries = 0; + cmd.data = NULL; + cmd.error = 0; + + mrq.cmd = &cmd; + host->mrq = &mrq; + + /* + * In response to CMD19, the card sends 64 bytes of tuning + * block to the Host Controller. So we set the block size + * to 64 here. + */ + sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), SDHCI_BLOCK_SIZE); + + /* + * The tuning block is sent by the card to the host controller. + * So we set the TRNS_READ bit in the Transfer Mode register. + * This also takes care of setting DMA Enable and Multi Block + * Select in the same register to 0. + */ + sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE); + + sdhci_send_command(host, &cmd); + + host->cmd = NULL; + host->mrq = NULL; + + spin_unlock(&host->lock); + enable_irq(host->irq); + + /* Wait for Buffer Read Ready interrupt */ + wait_event_interruptible_timeout(host->buf_ready_int, + (host->tuning_done == 1), + msecs_to_jiffies(50)); + disable_irq(host->irq); + spin_lock(&host->lock); + + if (!host->tuning_done) { + printk(KERN_INFO DRIVER_NAME ": Timeout waiting for " + "Buffer Read Ready interrupt during tuning " + "procedure, falling back to fixed sampling " + "clock\n"); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + ctrl &= ~SDHCI_CTRL_EXEC_TUNING; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + + err = -EIO; + goto out; + } + + host->tuning_done = 0; + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + tuning_loop_counter--; + timeout--; + mdelay(1); + } while (ctrl & SDHCI_CTRL_EXEC_TUNING); + + /* + * The Host Driver has exhausted the maximum number of loops allowed, + * so use fixed sampling frequency. + */ + if (!tuning_loop_counter || !timeout) { + ctrl &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + } else { + if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { + printk(KERN_INFO DRIVER_NAME ": Tuning procedure" + " failed, falling back to fixed sampling" + " clock\n"); + err = -EIO; + } + } + +out: + /* + * If this is the very first time we are here, we start the retuning + * timer. Since only during the first time, SDHCI_NEEDS_RETUNING + * flag won't be set, we check this condition before actually starting + * the timer. + */ + if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count && + (host->tuning_mode == SDHCI_TUNING_MODE_1)) { + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); + /* Tuning mode 1 limits the maximum data length to 4MB */ + mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size; + } else { + host->flags &= ~SDHCI_NEEDS_RETUNING; + /* Reload the new initial value for timer */ + if (host->tuning_mode == SDHCI_TUNING_MODE_1) + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); + } + + /* + * In case tuning fails, host controllers which support re-tuning can + * try tuning again at a later time, when the re-tuning timer expires. + * So for these controllers, we return 0. Since there might be other + * controllers who do not have this capability, we return error for + * them. + */ + if (err && host->tuning_count && + host->tuning_mode == SDHCI_TUNING_MODE_1) + err = 0; + + sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier); + spin_unlock(&host->lock); + enable_irq(host->irq); + + return err; +} + +static void sdhci_enable_preset_value(struct mmc_host *mmc, bool enable) +{ + struct sdhci_host *host; + u16 ctrl; + unsigned long flags; + + host = mmc_priv(mmc); + + /* Host Controller v3.00 defines preset value registers */ + if (host->version < SDHCI_SPEC_300) + return; + + spin_lock_irqsave(&host->lock, flags); + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* + * We only enable or disable Preset Value if they are not already + * enabled or disabled respectively. Otherwise, we bail out. + */ + if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + } else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) { + ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; + sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + } + + spin_unlock_irqrestore(&host->lock, flags); +} + static const struct mmc_host_ops sdhci_ops = { .request = sdhci_request, .set_ios = sdhci_set_ios, .get_ro = sdhci_get_ro, .enable_sdio_irq = sdhci_enable_sdio_irq, + .start_signal_voltage_switch = sdhci_start_signal_voltage_switch, + .execute_tuning = sdhci_execute_tuning, + .enable_preset_value = sdhci_enable_preset_value, }; /*****************************************************************************\ @@ -1345,6 +1863,9 @@ static void sdhci_tasklet_finish(unsigned long param) del_timer(&host->timer); + if (host->version >= SDHCI_SPEC_300) + del_timer(&host->tuning_timer); + mrq = host->mrq; /* @@ -1418,6 +1939,20 @@ static void sdhci_timeout_timer(unsigned long data) spin_unlock_irqrestore(&host->lock, flags); } +static void sdhci_tuning_timer(unsigned long data) +{ + struct sdhci_host *host; + unsigned long flags; + + host = (struct sdhci_host *)data; + + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_NEEDS_RETUNING; + + spin_unlock_irqrestore(&host->lock, flags); +} + /*****************************************************************************\ * * * Interrupt handling * @@ -1506,6 +2041,16 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) { BUG_ON(intmask == 0); + /* CMD19 generates _only_ Buffer Read Ready interrupt */ + if (intmask & SDHCI_INT_DATA_AVAIL) { + if (SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) == + MMC_SEND_TUNING_BLOCK) { + host->tuning_done = 1; + wake_up(&host->buf_ready_int); + return; + } + } + if (!host->data) { /* * The "data complete" interrupt is also used to @@ -1551,10 +2096,28 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) * We currently don't do anything fancy with DMA * boundaries, but as we can't disable the feature * we need to at least restart the transfer. + * + * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS) + * should return a valid address to continue from, but as + * some controllers are faulty, don't trust them. */ - if (intmask & SDHCI_INT_DMA_END) - sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS), - SDHCI_DMA_ADDRESS); + if (intmask & SDHCI_INT_DMA_END) { + u32 dmastart, dmanow; + dmastart = sg_dma_address(host->data->sg); + dmanow = dmastart + host->data->bytes_xfered; + /* + * Force update to the next DMA block boundary. + */ + dmanow = (dmanow & + ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) + + SDHCI_DEFAULT_BOUNDARY_SIZE; + host->data->bytes_xfered = dmanow - dmastart; + DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes," + " next 0x%08x\n", + mmc_hostname(host->mmc), dmastart, + host->data->bytes_xfered, dmanow); + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); + } if (intmask & SDHCI_INT_DATA_END) { if (host->cmd) { @@ -1664,6 +2227,14 @@ int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) sdhci_disable_card_detection(host); + /* Disable tuning since we are suspending */ + if (host->version >= SDHCI_SPEC_300 && host->tuning_count && + host->tuning_mode == SDHCI_TUNING_MODE_1) { + host->flags &= ~SDHCI_NEEDS_RETUNING; + mod_timer(&host->tuning_timer, jiffies + + host->tuning_count * HZ); + } + ret = mmc_suspend_host(host->mmc); if (ret) return ret; @@ -1705,6 +2276,11 @@ int sdhci_resume_host(struct sdhci_host *host) ret = mmc_resume_host(host->mmc); sdhci_enable_card_detection(host); + /* Set the re-tuning expiration flag */ + if ((host->version >= SDHCI_SPEC_300) && host->tuning_count && + (host->tuning_mode == SDHCI_TUNING_MODE_1)) + host->flags |= SDHCI_NEEDS_RETUNING; + return ret; } @@ -1751,7 +2327,9 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host); int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; - unsigned int caps, ocr_avail; + u32 caps[2]; + u32 max_current_caps; + unsigned int ocr_avail; int ret; WARN_ON(host == NULL); @@ -1774,12 +2352,15 @@ int sdhci_add_host(struct sdhci_host *host) host->version); } - caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : + caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : sdhci_readl(host, SDHCI_CAPABILITIES); + caps[1] = (host->version >= SDHCI_SPEC_300) ? + sdhci_readl(host, SDHCI_CAPABILITIES_1) : 0; + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; - else if (!(caps & SDHCI_CAN_DO_SDMA)) + else if (!(caps[0] & SDHCI_CAN_DO_SDMA)) DBG("Controller doesn't have SDMA capability\n"); else host->flags |= SDHCI_USE_SDMA; @@ -1790,7 +2371,8 @@ int sdhci_add_host(struct sdhci_host *host) host->flags &= ~SDHCI_USE_SDMA; } - if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2)) + if ((host->version >= SDHCI_SPEC_200) && + (caps[0] & SDHCI_CAN_DO_ADMA2)) host->flags |= SDHCI_USE_ADMA; if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && @@ -1840,10 +2422,10 @@ int sdhci_add_host(struct sdhci_host *host) } if (host->version >= SDHCI_SPEC_300) - host->max_clk = (caps & SDHCI_CLOCK_V3_BASE_MASK) + host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else - host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) + host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; host->max_clk *= 1000000; @@ -1859,7 +2441,7 @@ int sdhci_add_host(struct sdhci_host *host) } host->timeout_clk = - (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; + (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; if (host->timeout_clk == 0) { if (host->ops->get_timeout_clock) { host->timeout_clk = host->ops->get_timeout_clock(host); @@ -1871,22 +2453,55 @@ int sdhci_add_host(struct sdhci_host *host) return -ENODEV; } } - if (caps & SDHCI_TIMEOUT_CLK_UNIT) + if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; /* + * In case of Host Controller v3.00, find out whether clock + * multiplier is supported. + */ + host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >> + SDHCI_CLOCK_MUL_SHIFT; + + /* + * In case the value in Clock Multiplier is 0, then programmable + * clock mode is not supported, otherwise the actual clock + * multiplier is one more than the value of Clock Multiplier + * in the Capabilities Register. + */ + if (host->clk_mul) + host->clk_mul += 1; + + /* * Set host parameters. */ mmc->ops = &sdhci_ops; + mmc->f_max = host->max_clk; if (host->ops->get_min_clock) mmc->f_min = host->ops->get_min_clock(host); - else if (host->version >= SDHCI_SPEC_300) - mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; - else + else if (host->version >= SDHCI_SPEC_300) { + if (host->clk_mul) { + mmc->f_min = (host->max_clk * host->clk_mul) / 1024; + mmc->f_max = host->max_clk * host->clk_mul; + } else + mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; + } else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; - mmc->f_max = host->max_clk; - mmc->caps |= MMC_CAP_SDIO_IRQ; + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; + + if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) + host->flags |= SDHCI_AUTO_CMD12; + + /* Auto-CMD23 stuff only works in ADMA or PIO. */ + if ((host->version >= SDHCI_SPEC_300) && + ((host->flags & SDHCI_USE_ADMA) || + !(host->flags & SDHCI_USE_SDMA))) { + host->flags |= SDHCI_AUTO_CMD23; + DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); + } else { + DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc)); + } /* * A controller may support 8-bit width, but the board itself @@ -1898,21 +2513,113 @@ int sdhci_add_host(struct sdhci_host *host) if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) mmc->caps |= MMC_CAP_4_BIT_DATA; - if (caps & SDHCI_CAN_DO_HISPD) + if (caps[0] & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && mmc_card_is_removable(mmc)) mmc->caps |= MMC_CAP_NEEDS_POLL; + /* UHS-I mode(s) supported by the host controller. */ + if (host->version >= SDHCI_SPEC_300) + mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25; + + /* SDR104 supports also implies SDR50 support */ + if (caps[1] & SDHCI_SUPPORT_SDR104) + mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50; + else if (caps[1] & SDHCI_SUPPORT_SDR50) + mmc->caps |= MMC_CAP_UHS_SDR50; + + if (caps[1] & SDHCI_SUPPORT_DDR50) + mmc->caps |= MMC_CAP_UHS_DDR50; + + /* Does the host needs tuning for SDR50? */ + if (caps[1] & SDHCI_USE_SDR50_TUNING) + host->flags |= SDHCI_SDR50_NEEDS_TUNING; + + /* Driver Type(s) (A, C, D) supported by the host */ + if (caps[1] & SDHCI_DRIVER_TYPE_A) + mmc->caps |= MMC_CAP_DRIVER_TYPE_A; + if (caps[1] & SDHCI_DRIVER_TYPE_C) + mmc->caps |= MMC_CAP_DRIVER_TYPE_C; + if (caps[1] & SDHCI_DRIVER_TYPE_D) + mmc->caps |= MMC_CAP_DRIVER_TYPE_D; + + /* Initial value for re-tuning timer count */ + host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >> + SDHCI_RETUNING_TIMER_COUNT_SHIFT; + + /* + * In case Re-tuning Timer is not disabled, the actual value of + * re-tuning timer will be 2 ^ (n - 1). + */ + if (host->tuning_count) + host->tuning_count = 1 << (host->tuning_count - 1); + + /* Re-tuning mode supported by the Host Controller */ + host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >> + SDHCI_RETUNING_MODE_SHIFT; + ocr_avail = 0; - if (caps & SDHCI_CAN_VDD_330) + /* + * According to SD Host Controller spec v3.00, if the Host System + * can afford more than 150mA, Host Driver should set XPC to 1. Also + * the value is meaningful only if Voltage Support in the Capabilities + * register is set. The actual current value is 4 times the register + * value. + */ + max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); + + if (caps[0] & SDHCI_CAN_VDD_330) { + int max_current_330; + ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; - if (caps & SDHCI_CAN_VDD_300) + + max_current_330 = ((max_current_caps & + SDHCI_MAX_CURRENT_330_MASK) >> + SDHCI_MAX_CURRENT_330_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + + if (max_current_330 > 150) + mmc->caps |= MMC_CAP_SET_XPC_330; + } + if (caps[0] & SDHCI_CAN_VDD_300) { + int max_current_300; + ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31; - if (caps & SDHCI_CAN_VDD_180) + + max_current_300 = ((max_current_caps & + SDHCI_MAX_CURRENT_300_MASK) >> + SDHCI_MAX_CURRENT_300_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + + if (max_current_300 > 150) + mmc->caps |= MMC_CAP_SET_XPC_300; + } + if (caps[0] & SDHCI_CAN_VDD_180) { + int max_current_180; + ocr_avail |= MMC_VDD_165_195; + max_current_180 = ((max_current_caps & + SDHCI_MAX_CURRENT_180_MASK) >> + SDHCI_MAX_CURRENT_180_SHIFT) * + SDHCI_MAX_CURRENT_MULTIPLIER; + + if (max_current_180 > 150) + mmc->caps |= MMC_CAP_SET_XPC_180; + + /* Maximum current capabilities of the host at 1.8V */ + if (max_current_180 >= 800) + mmc->caps |= MMC_CAP_MAX_CURRENT_800; + else if (max_current_180 >= 600) + mmc->caps |= MMC_CAP_MAX_CURRENT_600; + else if (max_current_180 >= 400) + mmc->caps |= MMC_CAP_MAX_CURRENT_400; + else + mmc->caps |= MMC_CAP_MAX_CURRENT_200; + } + mmc->ocr_avail = ocr_avail; mmc->ocr_avail_sdio = ocr_avail; if (host->ocr_avail_sdio) @@ -1972,7 +2679,7 @@ int sdhci_add_host(struct sdhci_host *host) if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) { mmc->max_blk_size = 2; } else { - mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> + mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; if (mmc->max_blk_size >= 3) { printk(KERN_WARNING "%s: Invalid maximum block size, " @@ -1998,6 +2705,15 @@ int sdhci_add_host(struct sdhci_host *host) setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host); + if (host->version >= SDHCI_SPEC_300) { + init_waitqueue_head(&host->buf_ready_int); + + /* Initialize re-tuning timer */ + init_timer(&host->tuning_timer); + host->tuning_timer.data = (unsigned long)host; + host->tuning_timer.function = sdhci_tuning_timer; + } + ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, mmc_hostname(mmc), host); if (ret) @@ -2091,6 +2807,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) free_irq(host->irq, host); del_timer_sync(&host->timer); + if (host->version >= SDHCI_SPEC_300) + del_timer_sync(&host->tuning_timer); tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); |