diff options
Diffstat (limited to 'drivers/mtd/nand/mxc_nand.c')
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 783 |
1 files changed, 296 insertions, 487 deletions
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 65b26d5a5c0d..45dec5770da0 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -33,9 +33,13 @@ #include <asm/mach/flash.h> #include <mach/mxc_nand.h> +#include <mach/hardware.h> #define DRIVER_NAME "mxc_nand" +#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) +#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27()) + /* Addresses for NFC registers */ #define NFC_BUF_SIZE 0xE00 #define NFC_BUF_ADDR 0xE04 @@ -46,24 +50,14 @@ #define NFC_RSLTMAIN_AREA 0xE0E #define NFC_RSLTSPARE_AREA 0xE10 #define NFC_WRPROT 0xE12 -#define NFC_UNLOCKSTART_BLKADDR 0xE14 -#define NFC_UNLOCKEND_BLKADDR 0xE16 +#define NFC_V1_UNLOCKSTART_BLKADDR 0xe14 +#define NFC_V1_UNLOCKEND_BLKADDR 0xe16 +#define NFC_V21_UNLOCKSTART_BLKADDR 0xe20 +#define NFC_V21_UNLOCKEND_BLKADDR 0xe22 #define NFC_NF_WRPRST 0xE18 #define NFC_CONFIG1 0xE1A #define NFC_CONFIG2 0xE1C -/* Addresses for NFC RAM BUFFER Main area 0 */ -#define MAIN_AREA0 0x000 -#define MAIN_AREA1 0x200 -#define MAIN_AREA2 0x400 -#define MAIN_AREA3 0x600 - -/* Addresses for NFC SPARE BUFFER Spare area 0 */ -#define SPARE_AREA0 0x800 -#define SPARE_AREA1 0x810 -#define SPARE_AREA2 0x820 -#define SPARE_AREA3 0x830 - /* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register * for Command operation */ #define NFC_CMD 0x1 @@ -106,48 +100,66 @@ struct mxc_nand_host { struct mtd_partition *parts; struct device *dev; + void *spare0; + void *main_area0; + void *main_area1; + + void __iomem *base; void __iomem *regs; - int spare_only; int status_request; - int pagesize_2k; - uint16_t col_addr; struct clk *clk; int clk_act; int irq; wait_queue_head_t irq_waitq; -}; - -/* Define delays in microsec for NAND device operations */ -#define TROP_US_DELAY 2000 -/* Macros to get byte and bit positions of ECC */ -#define COLPOS(x) ((x) >> 3) -#define BITPOS(x) ((x) & 0xf) -/* Define single bit Error positions in Main & Spare area */ -#define MAIN_SINGLEBIT_ERROR 0x4 -#define SPARE_SINGLEBIT_ERROR 0x1 - -/* OOB placement block for use with hardware ecc generation */ -static struct nand_ecclayout nand_hw_eccoob_8 = { - .eccbytes = 5, - .eccpos = {6, 7, 8, 9, 10}, - .oobfree = {{0, 5}, {11, 5}, } + uint8_t *data_buf; + unsigned int buf_start; + int spare_len; }; -static struct nand_ecclayout nand_hw_eccoob_16 = { +/* OOB placement block for use with hardware ecc generation */ +static struct nand_ecclayout nandv1_hw_eccoob_smallpage = { .eccbytes = 5, .eccpos = {6, 7, 8, 9, 10}, - .oobfree = {{0, 5}, {11, 5}, } + .oobfree = {{0, 5}, {12, 4}, } }; -static struct nand_ecclayout nand_hw_eccoob_64 = { +static struct nand_ecclayout nandv1_hw_eccoob_largepage = { .eccbytes = 20, .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26, 38, 39, 40, 41, 42, 54, 55, 56, 57, 58}, .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, } }; +/* OOB description for 512 byte pages with 16 byte OOB */ +static struct nand_ecclayout nandv2_hw_eccoob_smallpage = { + .eccbytes = 1 * 9, + .eccpos = { + 7, 8, 9, 10, 11, 12, 13, 14, 15 + }, + .oobfree = { + {.offset = 0, .length = 5} + } +}; + +/* OOB description for 2048 byte pages with 64 byte OOB */ +static struct nand_ecclayout nandv2_hw_eccoob_largepage = { + .eccbytes = 4 * 9, + .eccpos = { + 7, 8, 9, 10, 11, 12, 13, 14, 15, + 23, 24, 25, 26, 27, 28, 29, 30, 31, + 39, 40, 41, 42, 43, 44, 45, 46, 47, + 55, 56, 57, 58, 59, 60, 61, 62, 63 + }, + .oobfree = { + {.offset = 2, .length = 4}, + {.offset = 16, .length = 7}, + {.offset = 32, .length = 7}, + {.offset = 48, .length = 7} + } +}; + #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL }; #endif @@ -170,10 +182,10 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) /* This function polls the NANDFC to wait for the basic operation to * complete by checking the INT bit of config2 register. */ -static void wait_op_done(struct mxc_nand_host *host, int max_retries, - uint16_t param, int useirq) +static void wait_op_done(struct mxc_nand_host *host, int useirq) { uint32_t tmp; + int max_retries = 2000; if (useirq) { if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) { @@ -200,8 +212,8 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, udelay(1); } if (max_retries < 0) - DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n", - __func__, param); + DEBUG(MTD_DEBUG_LEVEL0, "%s: INT not set\n", + __func__); } } @@ -215,7 +227,7 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq) writew(NFC_CMD, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, cmd, useirq); + wait_op_done(host, useirq); } /* This function sends an address (or partial address) to the @@ -229,82 +241,47 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr, int islast) writew(NFC_ADDR, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, addr, islast); + wait_op_done(host, islast); } -/* This function requests the NANDFC to initate the transfer - * of data currently in the NANDFC RAM buffer to the NAND device. */ -static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, - int spare_only) +static void send_page(struct mtd_info *mtd, unsigned int ops) { - DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only); - - /* NANDFC buffer 0 is used for page read/write */ - writew(buf_id, host->regs + NFC_BUF_ADDR); - - /* Configure spare or page+spare access */ - if (!host->pagesize_2k) { - uint16_t config1 = readw(host->regs + NFC_CONFIG1); - if (spare_only) - config1 |= NFC_SP_EN; - else - config1 &= ~(NFC_SP_EN); - writew(config1, host->regs + NFC_CONFIG1); - } + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + int bufs, i; - writew(NFC_INPUT, host->regs + NFC_CONFIG2); + if (nfc_is_v1() && mtd->writesize > 512) + bufs = 4; + else + bufs = 1; - /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, spare_only, true); -} + for (i = 0; i < bufs; i++) { -/* Requests NANDFC to initated the transfer of data from the - * NAND device into in the NANDFC ram buffer. */ -static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, - int spare_only) -{ - DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only); + /* NANDFC buffer 0 is used for page read/write */ + writew(i, host->regs + NFC_BUF_ADDR); - /* NANDFC buffer 0 is used for page read/write */ - writew(buf_id, host->regs + NFC_BUF_ADDR); + writew(ops, host->regs + NFC_CONFIG2); - /* Configure spare or page+spare access */ - if (!host->pagesize_2k) { - uint32_t config1 = readw(host->regs + NFC_CONFIG1); - if (spare_only) - config1 |= NFC_SP_EN; - else - config1 &= ~NFC_SP_EN; - writew(config1, host->regs + NFC_CONFIG1); + /* Wait for operation to complete */ + wait_op_done(host, true); } - - writew(NFC_OUTPUT, host->regs + NFC_CONFIG2); - - /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, spare_only, true); } /* Request the NANDFC to perform a read of the NAND device ID. */ static void send_read_id(struct mxc_nand_host *host) { struct nand_chip *this = &host->nand; - uint16_t tmp; /* NANDFC buffer 0 is used for device ID output */ writew(0x0, host->regs + NFC_BUF_ADDR); - /* Read ID into main buffer */ - tmp = readw(host->regs + NFC_CONFIG1); - tmp &= ~NFC_SP_EN; - writew(tmp, host->regs + NFC_CONFIG1); - writew(NFC_ID, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, 0, true); + wait_op_done(host, true); if (this->options & NAND_BUSWIDTH_16) { - void __iomem *main_buf = host->regs + MAIN_AREA0; + void __iomem *main_buf = host->main_area0; /* compress the ID info */ writeb(readb(main_buf + 2), main_buf + 1); writeb(readb(main_buf + 4), main_buf + 2); @@ -312,15 +289,16 @@ static void send_read_id(struct mxc_nand_host *host) writeb(readb(main_buf + 8), main_buf + 4); writeb(readb(main_buf + 10), main_buf + 5); } + memcpy(host->data_buf, host->main_area0, 16); } /* This function requests the NANDFC to perform a read of the * NAND device status and returns the current status. */ static uint16_t get_dev_status(struct mxc_nand_host *host) { - void __iomem *main_buf = host->regs + MAIN_AREA1; + void __iomem *main_buf = host->main_area1; uint32_t store; - uint16_t ret, tmp; + uint16_t ret; /* Issue status request to NAND device */ /* store the main area1 first word, later do recovery */ @@ -329,15 +307,10 @@ static uint16_t get_dev_status(struct mxc_nand_host *host) * corruption of read/write buffer on status requests. */ writew(1, host->regs + NFC_BUF_ADDR); - /* Read status into main buffer */ - tmp = readw(host->regs + NFC_CONFIG1); - tmp &= ~NFC_SP_EN; - writew(tmp, host->regs + NFC_CONFIG1); - writew(NFC_STATUS, host->regs + NFC_CONFIG2); /* Wait for operation to complete */ - wait_op_done(host, TROP_US_DELAY, 0, true); + wait_op_done(host, true); /* Status is placed in first word of main buffer */ /* get status, then recovery area 1 data */ @@ -397,32 +370,14 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint8_t ret = 0; - uint16_t col, rd_word; - uint16_t __iomem *main_buf = host->regs + MAIN_AREA0; - uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0; + uint8_t ret; /* Check for status request */ if (host->status_request) return get_dev_status(host) & 0xFF; - /* Get column for 16-bit access */ - col = host->col_addr >> 1; - - /* If we are accessing the spare region */ - if (host->spare_only) - rd_word = readw(&spare_buf[col]); - else - rd_word = readw(&main_buf[col]); - - /* Pick upper/lower byte of word from RAM buffer */ - if (host->col_addr & 0x1) - ret = (rd_word >> 8) & 0xFF; - else - ret = rd_word & 0xFF; - - /* Update saved column address */ - host->col_addr++; + ret = *(uint8_t *)(host->data_buf + host->buf_start); + host->buf_start++; return ret; } @@ -431,33 +386,10 @@ static uint16_t mxc_nand_read_word(struct mtd_info *mtd) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t col, rd_word, ret; - uint16_t __iomem *p; - - DEBUG(MTD_DEBUG_LEVEL3, - "mxc_nand_read_word(col = %d)\n", host->col_addr); - - col = host->col_addr; - /* Adjust saved column address */ - if (col < mtd->writesize && host->spare_only) - col += mtd->writesize; + uint16_t ret; - if (col < mtd->writesize) - p = (host->regs + MAIN_AREA0) + (col >> 1); - else - p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1); - - if (col & 1) { - rd_word = readw(p); - ret = (rd_word >> 8) & 0xff; - rd_word = readw(&p[1]); - ret |= (rd_word << 8) & 0xff00; - - } else - ret = readw(p); - - /* Update saved column address */ - host->col_addr = col + 2; + ret = *(uint16_t *)(host->data_buf + host->buf_start); + host->buf_start += 2; return ret; } @@ -470,94 +402,14 @@ static void mxc_nand_write_buf(struct mtd_info *mtd, { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - int n, col, i = 0; - - DEBUG(MTD_DEBUG_LEVEL3, - "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr, - len); - - col = host->col_addr; + u16 col = host->buf_start; + int n = mtd->oobsize + mtd->writesize - col; - /* Adjust saved column address */ - if (col < mtd->writesize && host->spare_only) - col += mtd->writesize; + n = min(n, len); - n = mtd->writesize + mtd->oobsize - col; - n = min(len, n); - - DEBUG(MTD_DEBUG_LEVEL3, - "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n); - - while (n) { - void __iomem *p; - - if (col < mtd->writesize) - p = host->regs + MAIN_AREA0 + (col & ~3); - else - p = host->regs + SPARE_AREA0 - - mtd->writesize + (col & ~3); - - DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__, - __LINE__, p); - - if (((col | (int)&buf[i]) & 3) || n < 16) { - uint32_t data = 0; - - if (col & 3 || n < 4) - data = readl(p); - - switch (col & 3) { - case 0: - if (n) { - data = (data & 0xffffff00) | - (buf[i++] << 0); - n--; - col++; - } - case 1: - if (n) { - data = (data & 0xffff00ff) | - (buf[i++] << 8); - n--; - col++; - } - case 2: - if (n) { - data = (data & 0xff00ffff) | - (buf[i++] << 16); - n--; - col++; - } - case 3: - if (n) { - data = (data & 0x00ffffff) | - (buf[i++] << 24); - n--; - col++; - } - } - - writel(data, p); - } else { - int m = mtd->writesize - col; + memcpy(host->data_buf + col, buf, n); - if (col >= mtd->writesize) - m += mtd->oobsize; - - m = min(n, m) & ~3; - - DEBUG(MTD_DEBUG_LEVEL3, - "%s:%d: n = %d, m = %d, i = %d, col = %d\n", - __func__, __LINE__, n, m, i, col); - - memcpy(p, &buf[i], m); - col += m; - i += m; - n -= m; - } - } - /* Update saved column address */ - host->col_addr = col; + host->buf_start += n; } /* Read the data buffer from the NAND Flash. To read the data from NAND @@ -568,75 +420,14 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - int n, col, i = 0; - - DEBUG(MTD_DEBUG_LEVEL3, - "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len); - - col = host->col_addr; + u16 col = host->buf_start; + int n = mtd->oobsize + mtd->writesize - col; - /* Adjust saved column address */ - if (col < mtd->writesize && host->spare_only) - col += mtd->writesize; + n = min(n, len); - n = mtd->writesize + mtd->oobsize - col; - n = min(len, n); - - while (n) { - void __iomem *p; - - if (col < mtd->writesize) - p = host->regs + MAIN_AREA0 + (col & ~3); - else - p = host->regs + SPARE_AREA0 - - mtd->writesize + (col & ~3); - - if (((col | (int)&buf[i]) & 3) || n < 16) { - uint32_t data; - - data = readl(p); - switch (col & 3) { - case 0: - if (n) { - buf[i++] = (uint8_t) (data); - n--; - col++; - } - case 1: - if (n) { - buf[i++] = (uint8_t) (data >> 8); - n--; - col++; - } - case 2: - if (n) { - buf[i++] = (uint8_t) (data >> 16); - n--; - col++; - } - case 3: - if (n) { - buf[i++] = (uint8_t) (data >> 24); - n--; - col++; - } - } - } else { - int m = mtd->writesize - col; - - if (col >= mtd->writesize) - m += mtd->oobsize; - - m = min(n, m) & ~3; - memcpy(&buf[i], p, m); - col += m; - i += m; - n -= m; - } - } - /* Update saved column address */ - host->col_addr = col; + memcpy(buf, host->data_buf + col, len); + host->buf_start += len; } /* Used by the upper layer to verify the data in NAND Flash @@ -654,23 +445,6 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; -#ifdef CONFIG_MTD_NAND_MXC_FORCE_CE - if (chip > 0) { - DEBUG(MTD_DEBUG_LEVEL0, - "ERROR: Illegal chip select (chip = %d)\n", chip); - return; - } - - if (chip == -1) { - writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE, - host->regs + NFC_CONFIG1); - return; - } - - writew(readw(host->regs + NFC_CONFIG1) | NFC_CE, - host->regs + NFC_CONFIG1); -#endif - switch (chip) { case -1: /* Disable the NFC clock */ @@ -692,94 +466,40 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) } } -/* Used by the upper layer to write command to NAND Flash for - * different operations to be carried out on NAND Flash */ -static void mxc_nand_command(struct mtd_info *mtd, unsigned command, - int column, int page_addr) +/* + * Function to transfer data to/from spare area. + */ +static void copy_spare(struct mtd_info *mtd, bool bfrom) { - struct nand_chip *nand_chip = mtd->priv; - struct mxc_nand_host *host = nand_chip->priv; - int useirq = true; - - DEBUG(MTD_DEBUG_LEVEL3, - "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", - command, column, page_addr); - - /* Reset command state information */ - host->status_request = false; - - /* Command pre-processing step */ - switch (command) { - - case NAND_CMD_STATUS: - host->col_addr = 0; - host->status_request = true; - break; - - case NAND_CMD_READ0: - host->col_addr = column; - host->spare_only = false; - useirq = false; - break; - - case NAND_CMD_READOOB: - host->col_addr = column; - host->spare_only = true; - useirq = false; - if (host->pagesize_2k) - command = NAND_CMD_READ0; /* only READ0 is valid */ - break; - - case NAND_CMD_SEQIN: - if (column >= mtd->writesize) { - /* - * FIXME: before send SEQIN command for write OOB, - * We must read one page out. - * For K9F1GXX has no READ1 command to set current HW - * pointer to spare area, we must write the whole page - * including OOB together. - */ - if (host->pagesize_2k) - /* call ourself to read a page */ - mxc_nand_command(mtd, NAND_CMD_READ0, 0, - page_addr); - - host->col_addr = column - mtd->writesize; - host->spare_only = true; - - /* Set program pointer to spare region */ - if (!host->pagesize_2k) - send_cmd(host, NAND_CMD_READOOB, false); - } else { - host->spare_only = false; - host->col_addr = column; - - /* Set program pointer to page start */ - if (!host->pagesize_2k) - send_cmd(host, NAND_CMD_READ0, false); - } - useirq = false; - break; - - case NAND_CMD_PAGEPROG: - send_prog_page(host, 0, host->spare_only); - - if (host->pagesize_2k) { - /* data in 4 areas datas */ - send_prog_page(host, 1, host->spare_only); - send_prog_page(host, 2, host->spare_only); - send_prog_page(host, 3, host->spare_only); - } - - break; + struct nand_chip *this = mtd->priv; + struct mxc_nand_host *host = this->priv; + u16 i, j; + u16 n = mtd->writesize >> 9; + u8 *d = host->data_buf + mtd->writesize; + u8 *s = host->spare0; + u16 t = host->spare_len; + + j = (mtd->oobsize / n >> 1) << 1; + + if (bfrom) { + for (i = 0; i < n - 1; i++) + memcpy(d + i * j, s + i * t, j); + + /* the last section */ + memcpy(d + i * j, s + i * t, mtd->oobsize - i * j); + } else { + for (i = 0; i < n - 1; i++) + memcpy(&s[i * t], &d[i * j], j); - case NAND_CMD_ERASE1: - useirq = false; - break; + /* the last section */ + memcpy(&s[i * t], &d[i * j], mtd->oobsize - i * j); } +} - /* Write out the command to the device. */ - send_cmd(host, command, useirq); +static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; /* Write out column address, if necessary */ if (column != -1) { @@ -791,7 +511,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, * the full page. */ send_addr(host, 0, page_addr == -1); - if (host->pagesize_2k) + if (mtd->writesize > 512) /* another col addr cycle for 2k page */ send_addr(host, 0, false); } @@ -801,7 +521,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, /* paddr_0 - p_addr_7 */ send_addr(host, (page_addr & 0xff), false); - if (host->pagesize_2k) { + if (mtd->writesize > 512) { if (mtd->size >= 0x10000000) { /* paddr_8 - paddr_15 */ send_addr(host, (page_addr >> 8) & 0xff, false); @@ -820,52 +540,136 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, send_addr(host, (page_addr >> 8) & 0xff, true); } } +} + +/* Used by the upper layer to write command to NAND Flash for + * different operations to be carried out on NAND Flash */ +static void mxc_nand_command(struct mtd_info *mtd, unsigned command, + int column, int page_addr) +{ + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; + + DEBUG(MTD_DEBUG_LEVEL3, + "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n", + command, column, page_addr); + + /* Reset command state information */ + host->status_request = false; - /* Command post-processing step */ + /* Command pre-processing step */ switch (command) { - case NAND_CMD_RESET: + case NAND_CMD_STATUS: + host->buf_start = 0; + host->status_request = true; + + send_cmd(host, command, true); + mxc_do_addr_cycle(mtd, column, page_addr); break; - case NAND_CMD_READOOB: case NAND_CMD_READ0: - if (host->pagesize_2k) { - /* send read confirm command */ + case NAND_CMD_READOOB: + if (command == NAND_CMD_READ0) + host->buf_start = column; + else + host->buf_start = column + mtd->writesize; + + if (mtd->writesize > 512) + command = NAND_CMD_READ0; /* only READ0 is valid */ + + send_cmd(host, command, false); + mxc_do_addr_cycle(mtd, column, page_addr); + + if (mtd->writesize > 512) send_cmd(host, NAND_CMD_READSTART, true); - /* read for each AREA */ - send_read_page(host, 0, host->spare_only); - send_read_page(host, 1, host->spare_only); - send_read_page(host, 2, host->spare_only); - send_read_page(host, 3, host->spare_only); - } else - send_read_page(host, 0, host->spare_only); + + send_page(mtd, NFC_OUTPUT); + + memcpy(host->data_buf, host->main_area0, mtd->writesize); + copy_spare(mtd, true); break; - case NAND_CMD_READID: - host->col_addr = 0; - send_read_id(host); + case NAND_CMD_SEQIN: + if (column >= mtd->writesize) { + /* + * FIXME: before send SEQIN command for write OOB, + * We must read one page out. + * For K9F1GXX has no READ1 command to set current HW + * pointer to spare area, we must write the whole page + * including OOB together. + */ + if (mtd->writesize > 512) + /* call ourself to read a page */ + mxc_nand_command(mtd, NAND_CMD_READ0, 0, + page_addr); + + host->buf_start = column; + + /* Set program pointer to spare region */ + if (mtd->writesize == 512) + send_cmd(host, NAND_CMD_READOOB, false); + } else { + host->buf_start = column; + + /* Set program pointer to page start */ + if (mtd->writesize == 512) + send_cmd(host, NAND_CMD_READ0, false); + } + + send_cmd(host, command, false); + mxc_do_addr_cycle(mtd, column, page_addr); break; case NAND_CMD_PAGEPROG: + memcpy(host->main_area0, host->data_buf, mtd->writesize); + copy_spare(mtd, false); + send_page(mtd, NFC_INPUT); + send_cmd(host, command, true); + mxc_do_addr_cycle(mtd, column, page_addr); break; - case NAND_CMD_STATUS: + case NAND_CMD_READID: + send_cmd(host, command, true); + mxc_do_addr_cycle(mtd, column, page_addr); + send_read_id(host); + host->buf_start = column; break; + case NAND_CMD_ERASE1: case NAND_CMD_ERASE2: + send_cmd(host, command, false); + mxc_do_addr_cycle(mtd, column, page_addr); + break; } } -/* Define some generic bad / good block scan pattern which are used - * while scanning a device for factory marked good / bad blocks. */ -static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; +/* + * The generic flash bbt decriptors overlap with our ecc + * hardware, so define some i.MX specific ones. + */ +static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' }; +static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' }; + +static struct nand_bbt_descr bbt_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 0, + .len = 4, + .veroffs = 4, + .maxblocks = 4, + .pattern = bbt_pattern, +}; -static struct nand_bbt_descr smallpage_memorybased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = 5, - .len = 1, - .pattern = scan_ff_pattern +static struct nand_bbt_descr bbt_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 0, + .len = 4, + .veroffs = 4, + .maxblocks = 4, + .pattern = mirror_pattern, }; static int __init mxcnd_probe(struct platform_device *pdev) @@ -877,12 +681,16 @@ static int __init mxcnd_probe(struct platform_device *pdev) struct resource *res; uint16_t tmp; int err = 0, nr_parts = 0; + struct nand_ecclayout *oob_smallpage, *oob_largepage; /* Allocate memory for MTD device structure and private data */ - host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL); + host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE + + NAND_MAX_OOBSIZE, GFP_KERNEL); if (!host) return -ENOMEM; + host->data_buf = (uint8_t *)(host + 1); + host->dev = &pdev->dev; /* structures must be linked */ this = &host->nand; @@ -890,7 +698,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; - mtd->name = "mxc_nand"; + mtd->name = DRIVER_NAME; /* 50 us command delay time */ this->chip_delay = 5; @@ -920,62 +728,93 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto eres; } - host->regs = ioremap(res->start, res->end - res->start + 1); - if (!host->regs) { + host->base = ioremap(res->start, resource_size(res)); + if (!host->base) { err = -ENOMEM; goto eres; } + host->main_area0 = host->base; + host->main_area1 = host->base + 0x200; + + if (nfc_is_v21()) { + host->regs = host->base + 0x1000; + host->spare0 = host->base + 0x1000; + host->spare_len = 64; + oob_smallpage = &nandv2_hw_eccoob_smallpage; + oob_largepage = &nandv2_hw_eccoob_largepage; + } else if (nfc_is_v1()) { + host->regs = host->base; + host->spare0 = host->base + 0x800; + host->spare_len = 16; + oob_smallpage = &nandv1_hw_eccoob_smallpage; + oob_largepage = &nandv1_hw_eccoob_largepage; + } else + BUG(); + + /* disable interrupt and spare enable */ tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_INT_MSK; + tmp &= ~NFC_SP_EN; writew(tmp, host->regs + NFC_CONFIG1); init_waitqueue_head(&host->irq_waitq); host->irq = platform_get_irq(pdev, 0); - err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host); + err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host); if (err) goto eirq; + /* Reset NAND */ + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + /* preset operation */ + /* Unlock the internal RAM Buffer */ + writew(0x2, host->regs + NFC_CONFIG); + + /* Blocks to be unlocked */ + if (nfc_is_v21()) { + writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR); + writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR); + this->ecc.bytes = 9; + } else if (nfc_is_v1()) { + writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR); + writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR); + this->ecc.bytes = 3; + } else + BUG(); + + /* Unlock Block Command for given address range */ + writew(0x4, host->regs + NFC_WRPROT); + + this->ecc.size = 512; + this->ecc.layout = oob_smallpage; + if (pdata->hw_ecc) { this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; this->ecc.correct = mxc_nand_correct_data; this->ecc.mode = NAND_ECC_HW; - this->ecc.size = 512; - this->ecc.bytes = 3; tmp = readw(host->regs + NFC_CONFIG1); tmp |= NFC_ECC_EN; writew(tmp, host->regs + NFC_CONFIG1); } else { - this->ecc.size = 512; - this->ecc.bytes = 3; - this->ecc.layout = &nand_hw_eccoob_8; this->ecc.mode = NAND_ECC_SOFT; tmp = readw(host->regs + NFC_CONFIG1); tmp &= ~NFC_ECC_EN; writew(tmp, host->regs + NFC_CONFIG1); } - /* Reset NAND */ - this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); - - /* preset operation */ - /* Unlock the internal RAM Buffer */ - writew(0x2, host->regs + NFC_CONFIG); - - /* Blocks to be unlocked */ - writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR); - writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR); - - /* Unlock Block Command for given address range */ - writew(0x4, host->regs + NFC_WRPROT); - /* NAND bus width determines access funtions used by upper layer */ - if (pdata->width == 2) { + if (pdata->width == 2) this->options |= NAND_BUSWIDTH_16; - this->ecc.layout = &nand_hw_eccoob_16; + + if (pdata->flash_bbt) { + this->bbt_td = &bbt_main_descr; + this->bbt_md = &bbt_mirror_descr; + /* update flash based bbt */ + this->options |= NAND_USE_FLASH_BBT; } /* first scan to find the device and get the page size */ @@ -984,38 +823,8 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } - if (mtd->writesize == 2048) { - host->pagesize_2k = 1; - this->badblock_pattern = &smallpage_memorybased; - } - - if (this->ecc.mode == NAND_ECC_HW) { - switch (mtd->oobsize) { - case 8: - this->ecc.layout = &nand_hw_eccoob_8; - break; - case 16: - this->ecc.layout = &nand_hw_eccoob_16; - break; - case 64: - this->ecc.layout = &nand_hw_eccoob_64; - break; - default: - /* page size not handled by HW ECC */ - /* switching back to soft ECC */ - this->ecc.size = 512; - this->ecc.bytes = 3; - this->ecc.layout = &nand_hw_eccoob_8; - this->ecc.mode = NAND_ECC_SOFT; - this->ecc.calculate = NULL; - this->ecc.correct = NULL; - this->ecc.hwctl = NULL; - tmp = readw(host->regs + NFC_CONFIG1); - tmp &= ~NFC_ECC_EN; - writew(tmp, host->regs + NFC_CONFIG1); - break; - } - } + if (mtd->writesize == 2048) + this->ecc.layout = oob_largepage; /* second phase scan */ if (nand_scan_tail(mtd)) { @@ -1043,7 +852,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) escan: free_irq(host->irq, host); eirq: - iounmap(host->regs); + iounmap(host->base); eres: clk_put(host->clk); eclk: @@ -1062,7 +871,7 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) nand_release(&host->mtd); free_irq(host->irq, host); - iounmap(host->regs); + iounmap(host->base); kfree(host); return 0; @@ -1113,7 +922,7 @@ static struct platform_driver mxcnd_driver = { .driver = { .name = DRIVER_NAME, }, - .remove = __exit_p(mxcnd_remove), + .remove = __devexit_p(mxcnd_remove), .suspend = mxcnd_suspend, .resume = mxcnd_resume, }; |