diff options
Diffstat (limited to 'drivers/mtd/spi-nor/spi-nor.c')
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 1491 |
1 files changed, 858 insertions, 633 deletions
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 7acf4a93b592..f4afe123e9dc 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -338,7 +338,7 @@ static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, if (nor->spimem) return spi_nor_spimem_read_data(nor, from, len, buf); - return nor->read(nor, from, len, buf); + return nor->controller_ops->read(nor, from, len, buf); } /** @@ -385,239 +385,172 @@ static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, if (nor->spimem) return spi_nor_spimem_write_data(nor, to, len, buf); - return nor->write(nor, to, len, buf); + return nor->controller_ops->write(nor, to, len, buf); } -/* - * Read the status register, returning its value in the location - * Return the status register value. - * Returns negative if error occurred. +/** + * spi_nor_write_enable() - Set write enable latch with Write Enable command. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. */ -static int read_sr(struct spi_nor *nor) +static int spi_nor_write_enable(struct spi_nor *nor) { int ret; if (nor->spimem) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + SPI_MEM_OP_NO_DATA); ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->read_reg(nor, SPINOR_OP_RDSR, nor->bouncebuf, 1); + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, + NULL, 0); } - if (ret < 0) { - pr_err("error %d reading SR\n", (int) ret); - return ret; - } + if (ret) + dev_dbg(nor->dev, "error %d on Write Enable\n", ret); - return nor->bouncebuf[0]; + return ret; } -/* - * Read the flag status register, returning its value in the location - * Return the status register value. - * Returns negative if error occurred. +/** + * spi_nor_write_disable() - Send Write Disable instruction to the chip. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. */ -static int read_fsr(struct spi_nor *nor) +static int spi_nor_write_disable(struct spi_nor *nor) { int ret; if (nor->spimem) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + SPI_MEM_OP_NO_DATA); ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->read_reg(nor, SPINOR_OP_RDFSR, nor->bouncebuf, 1); + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI, + NULL, 0); } - if (ret < 0) { - pr_err("error %d reading FSR\n", ret); - return ret; - } + if (ret) + dev_dbg(nor->dev, "error %d on Write Disable\n", ret); - return nor->bouncebuf[0]; + return ret; } -/* - * Read configuration register, returning its value in the - * location. Return the configuration register value. - * Returns negative if error occurred. +/** + * spi_nor_read_sr() - Read the Status Register. + * @nor: pointer to 'struct spi_nor'. + * @sr: pointer to a DMA-able buffer where the value of the + * Status Register will be written. + * + * Return: 0 on success, -errno otherwise. */ -static int read_cr(struct spi_nor *nor) +static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr) { int ret; if (nor->spimem) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + SPI_MEM_OP_DATA_IN(1, sr, 1)); ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->read_reg(nor, SPINOR_OP_RDCR, nor->bouncebuf, 1); + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR, + sr, 1); } - if (ret < 0) { - dev_err(nor->dev, "error %d reading CR\n", ret); - return ret; - } + if (ret) + dev_dbg(nor->dev, "error %d reading SR\n", ret); - return nor->bouncebuf[0]; + return ret; } -/* - * Write status register 1 byte - * Returns negative if error occurred. +/** + * spi_nor_read_fsr() - Read the Flag Status Register. + * @nor: pointer to 'struct spi_nor' + * @fsr: pointer to a DMA-able buffer where the value of the + * Flag Status Register will be written. + * + * Return: 0 on success, -errno otherwise. */ -static int write_sr(struct spi_nor *nor, u8 val) +static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr) { - nor->bouncebuf[0] = val; - if (nor->spimem) { - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); - - return spi_mem_exec_op(nor->spimem, &op); - } - - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->bouncebuf, 1); -} + int ret; -/* - * Set write enable latch with Write Enable command. - * Returns negative if error occurred. - */ -static int write_enable(struct spi_nor *nor) -{ if (nor->spimem) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_NO_DATA); + SPI_MEM_OP_DATA_IN(1, fsr, 1)); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR, + fsr, 1); } - return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); + if (ret) + dev_dbg(nor->dev, "error %d reading FSR\n", ret); + + return ret; } -/* - * Send write disable instruction to the chip. +/** + * spi_nor_read_cr() - Read the Configuration Register using the + * SPINOR_OP_RDCR (35h) command. + * @nor: pointer to 'struct spi_nor' + * @cr: pointer to a DMA-able buffer where the value of the + * Configuration Register will be written. + * + * Return: 0 on success, -errno otherwise. */ -static int write_disable(struct spi_nor *nor) +static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr) { + int ret; + if (nor->spimem) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_NO_DATA); + SPI_MEM_OP_DATA_IN(1, cr, 1)); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1); } - return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); -} - -static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) -{ - return mtd->priv; -} - - -static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) -{ - size_t i; - - for (i = 0; i < size; i++) - if (table[i][0] == opcode) - return table[i][1]; - - /* No conversion found, keep input op code. */ - return opcode; -} - -static u8 spi_nor_convert_3to4_read(u8 opcode) -{ - static const u8 spi_nor_3to4_read[][2] = { - { SPINOR_OP_READ, SPINOR_OP_READ_4B }, - { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B }, - { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B }, - { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, - { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, - { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, - { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B }, - { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B }, - - { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B }, - { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B }, - { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B }, - }; - - return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, - ARRAY_SIZE(spi_nor_3to4_read)); -} - -static u8 spi_nor_convert_3to4_program(u8 opcode) -{ - static const u8 spi_nor_3to4_program[][2] = { - { SPINOR_OP_PP, SPINOR_OP_PP_4B }, - { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B }, - { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B }, - { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B }, - { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B }, - }; - - return spi_nor_convert_opcode(opcode, spi_nor_3to4_program, - ARRAY_SIZE(spi_nor_3to4_program)); -} - -static u8 spi_nor_convert_3to4_erase(u8 opcode) -{ - static const u8 spi_nor_3to4_erase[][2] = { - { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B }, - { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B }, - { SPINOR_OP_SE, SPINOR_OP_SE_4B }, - }; - - return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase, - ARRAY_SIZE(spi_nor_3to4_erase)); -} - -static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) -{ - nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); - nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); - nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); - - if (!spi_nor_has_uniform_erase(nor)) { - struct spi_nor_erase_map *map = &nor->params.erase_map; - struct spi_nor_erase_type *erase; - int i; + if (ret) + dev_dbg(nor->dev, "error %d reading CR\n", ret); - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { - erase = &map->erase_type[i]; - erase->opcode = - spi_nor_convert_3to4_erase(erase->opcode); - } - } + return ret; } +/** + * macronix_set_4byte() - Set 4-byte address mode for Macronix flashes. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ static int macronix_set_4byte(struct spi_nor *nor, bool enable) { + int ret; + if (nor->spimem) { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? @@ -628,26 +561,55 @@ static int macronix_set_4byte(struct spi_nor *nor, bool enable) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, + enable ? SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + NULL, 0); } - return nor->write_reg(nor, enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, - NULL, 0); + if (ret) + dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret); + + return ret; } +/** + * st_micron_set_4byte() - Set 4-byte address mode for ST and Micron flashes. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ static int st_micron_set_4byte(struct spi_nor *nor, bool enable) { int ret; - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + ret = macronix_set_4byte(nor, enable); - write_disable(nor); + if (ret) + return ret; - return ret; + return spi_nor_write_disable(nor); } +/** + * spansion_set_4byte() - Set 4-byte address mode for Spansion flashes. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ static int spansion_set_4byte(struct spi_nor *nor, bool enable) { + int ret; + nor->bouncebuf[0] = enable << 7; if (nor->spimem) { @@ -657,14 +619,29 @@ static int spansion_set_4byte(struct spi_nor *nor, bool enable) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR, + nor->bouncebuf, 1); } - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->bouncebuf, 1); + if (ret) + dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret); + + return ret; } +/** + * spi_nor_write_ear() - Write Extended Address Register. + * @nor: pointer to 'struct spi_nor'. + * @ear: value to write to the Extended Address Register. + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) { + int ret; + nor->bouncebuf[0] = ear; if (nor->spimem) { @@ -674,12 +651,26 @@ static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR, + nor->bouncebuf, 1); } - return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1); + if (ret) + dev_dbg(nor->dev, "error %d writing EAR\n", ret); + + return ret; } +/** + * winbond_set_4byte() - Set 4-byte address mode for Winbond flashes. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ static int winbond_set_4byte(struct spi_nor *nor, bool enable) { int ret; @@ -693,15 +684,29 @@ static int winbond_set_4byte(struct spi_nor *nor, bool enable) * Register to be set to 1, so all 3-byte-address reads come from the * second 16M. We must clear the register to enable normal behavior. */ - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + ret = spi_nor_write_ear(nor, 0); - write_disable(nor); + if (ret) + return ret; - return ret; + return spi_nor_write_disable(nor); } +/** + * spi_nor_xread_sr() - Read the Status Register on S3AN flashes. + * @nor: pointer to 'struct spi_nor'. + * @sr: pointer to a DMA-able buffer where the value of the + * Status Register will be written. + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) { + int ret; + if (nor->spimem) { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1), @@ -709,27 +714,44 @@ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_IN(1, sr, 1)); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR, + sr, 1); } - return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1); + if (ret) + dev_dbg(nor->dev, "error %d reading XRDSR\n", ret); + + return ret; } +/** + * s3an_sr_ready() - Query the Status Register of the S3AN flash to see if the + * flash is ready for new commands. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ static int s3an_sr_ready(struct spi_nor *nor) { int ret; ret = spi_nor_xread_sr(nor, nor->bouncebuf); - if (ret < 0) { - dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); + if (ret) return ret; - } return !!(nor->bouncebuf[0] & XSR_RDY); } -static int spi_nor_clear_sr(struct spi_nor *nor) +/** + * spi_nor_clear_sr() - Clear the Status Register. + * @nor: pointer to 'struct spi_nor'. + */ +static void spi_nor_clear_sr(struct spi_nor *nor) { + int ret; + if (nor->spimem) { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1), @@ -737,20 +759,33 @@ static int spi_nor_clear_sr(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR, + NULL, 0); } - return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); + if (ret) + dev_dbg(nor->dev, "error %d clearing SR\n", ret); } +/** + * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready + * for new commands. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_sr_ready(struct spi_nor *nor) { - int sr = read_sr(nor); - if (sr < 0) - return sr; + int ret = spi_nor_read_sr(nor, nor->bouncebuf); + + if (ret) + return ret; - if (nor->flags & SNOR_F_USE_CLSR && sr & (SR_E_ERR | SR_P_ERR)) { - if (sr & SR_E_ERR) + if (nor->flags & SNOR_F_USE_CLSR && + nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) { + if (nor->bouncebuf[0] & SR_E_ERR) dev_err(nor->dev, "Erase Error occurred\n"); else dev_err(nor->dev, "Programming Error occurred\n"); @@ -759,11 +794,17 @@ static int spi_nor_sr_ready(struct spi_nor *nor) return -EIO; } - return !(sr & SR_WIP); + return !(nor->bouncebuf[0] & SR_WIP); } -static int spi_nor_clear_fsr(struct spi_nor *nor) +/** + * spi_nor_clear_fsr() - Clear the Flag Status Register. + * @nor: pointer to 'struct spi_nor'. + */ +static void spi_nor_clear_fsr(struct spi_nor *nor) { + int ret; + if (nor->spimem) { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1), @@ -771,25 +812,37 @@ static int spi_nor_clear_fsr(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR, + NULL, 0); } - return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); + if (ret) + dev_dbg(nor->dev, "error %d clearing FSR\n", ret); } +/** + * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is + * ready for new commands. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_fsr_ready(struct spi_nor *nor) { - int fsr = read_fsr(nor); - if (fsr < 0) - return fsr; + int ret = spi_nor_read_fsr(nor, nor->bouncebuf); - if (fsr & (FSR_E_ERR | FSR_P_ERR)) { - if (fsr & FSR_E_ERR) + if (ret) + return ret; + + if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) { + if (nor->bouncebuf[0] & FSR_E_ERR) dev_err(nor->dev, "Erase operation failed.\n"); else dev_err(nor->dev, "Program operation failed.\n"); - if (fsr & FSR_PT_ERR) + if (nor->bouncebuf[0] & FSR_PT_ERR) dev_err(nor->dev, "Attempted to modify a protected sector.\n"); @@ -797,9 +850,15 @@ static int spi_nor_fsr_ready(struct spi_nor *nor) return -EIO; } - return fsr & FSR_READY; + return nor->bouncebuf[0] & FSR_READY; } +/** + * spi_nor_ready() - Query the flash to see if it is ready for new commands. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_ready(struct spi_nor *nor) { int sr, fsr; @@ -816,9 +875,13 @@ static int spi_nor_ready(struct spi_nor *nor) return sr && fsr; } -/* - * Service routine to read status register until ready, or timeout occurs. - * Returns non-zero if error. +/** + * spi_nor_wait_till_ready_with_timeout() - Service routine to read the + * Status Register until ready, or timeout occurs. + * @nor: pointer to "struct spi_nor". + * @timeout_jiffies: jiffies to wait until timeout. + * + * Return: 0 on success, -errno otherwise. */ static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor, unsigned long timeout_jiffies) @@ -841,24 +904,305 @@ static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor, cond_resched(); } - dev_err(nor->dev, "flash operation timed out\n"); + dev_dbg(nor->dev, "flash operation timed out\n"); return -ETIMEDOUT; } +/** + * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the + * flash to be ready, or timeout occurs. + * @nor: pointer to "struct spi_nor". + * + * Return: 0 on success, -errno otherwise. + */ static int spi_nor_wait_till_ready(struct spi_nor *nor) { return spi_nor_wait_till_ready_with_timeout(nor, DEFAULT_READY_WAIT_JIFFIES); } -/* - * Erase the whole flash memory +/** + * spi_nor_write_sr() - Write the Status Register. + * @nor: pointer to 'struct spi_nor'. + * @sr: pointer to DMA-able buffer to write to the Status Register. + * @len: number of bytes to write to the Status Register. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len) +{ + int ret; + + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, sr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR, + sr, len); + } + + if (ret) { + dev_dbg(nor->dev, "error %d writing SR\n", ret); + return ret; + } + + return spi_nor_wait_till_ready(nor); +} + +/** + * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and + * ensure that the byte written match the received value. + * @nor: pointer to a 'struct spi_nor'. + * @sr1: byte value to be written to the Status Register. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1) +{ + int ret; + + nor->bouncebuf[0] = sr1; + + ret = spi_nor_write_sr(nor, nor->bouncebuf, 1); + if (ret) + return ret; + + ret = spi_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; + + if (nor->bouncebuf[0] != sr1) { + dev_dbg(nor->dev, "SR1: read back test failed\n"); + return -EIO; + } + + return 0; +} + +/** + * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the + * Status Register 2 in one shot. Ensure that the byte written in the Status + * Register 1 match the received value, and that the 16-bit Write did not + * affect what was already in the Status Register 2. + * @nor: pointer to a 'struct spi_nor'. + * @sr1: byte value to be written to the Status Register 1. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1) +{ + int ret; + u8 *sr_cr = nor->bouncebuf; + u8 cr_written; + + /* Make sure we don't overwrite the contents of Status Register 2. */ + if (!(nor->flags & SNOR_F_NO_READ_CR)) { + ret = spi_nor_read_cr(nor, &sr_cr[1]); + if (ret) + return ret; + } else if (nor->params.quad_enable) { + /* + * If the Status Register 2 Read command (35h) is not + * supported, we should at least be sure we don't + * change the value of the SR2 Quad Enable bit. + * + * We can safely assume that when the Quad Enable method is + * set, the value of the QE bit is one, as a consequence of the + * nor->params.quad_enable() call. + * + * We can safely assume that the Quad Enable bit is present in + * the Status Register 2 at BIT(1). According to the JESD216 + * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit + * Write Status (01h) command is available just for the cases + * in which the QE bit is described in SR2 at BIT(1). + */ + sr_cr[1] = SR2_QUAD_EN_BIT1; + } else { + sr_cr[1] = 0; + } + + sr_cr[0] = sr1; + + ret = spi_nor_write_sr(nor, sr_cr, 2); + if (ret) + return ret; + + if (nor->flags & SNOR_F_NO_READ_CR) + return 0; + + cr_written = sr_cr[1]; + + ret = spi_nor_read_cr(nor, &sr_cr[1]); + if (ret) + return ret; + + if (cr_written != sr_cr[1]) { + dev_dbg(nor->dev, "CR: read back test failed\n"); + return -EIO; + } + + return 0; +} + +/** + * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the + * Configuration Register in one shot. Ensure that the byte written in the + * Configuration Register match the received value, and that the 16-bit Write + * did not affect what was already in the Status Register 1. + * @nor: pointer to a 'struct spi_nor'. + * @cr: byte value to be written to the Configuration Register. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr) +{ + int ret; + u8 *sr_cr = nor->bouncebuf; + u8 sr_written; + + /* Keep the current value of the Status Register 1. */ + ret = spi_nor_read_sr(nor, sr_cr); + if (ret) + return ret; + + sr_cr[1] = cr; + + ret = spi_nor_write_sr(nor, sr_cr, 2); + if (ret) + return ret; + + sr_written = sr_cr[0]; + + ret = spi_nor_read_sr(nor, sr_cr); + if (ret) + return ret; + + if (sr_written != sr_cr[0]) { + dev_dbg(nor->dev, "SR: Read back test failed\n"); + return -EIO; + } + + if (nor->flags & SNOR_F_NO_READ_CR) + return 0; + + ret = spi_nor_read_cr(nor, &sr_cr[1]); + if (ret) + return ret; + + if (cr != sr_cr[1]) { + dev_dbg(nor->dev, "CR: read back test failed\n"); + return -EIO; + } + + return 0; +} + +/** + * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that + * the byte written match the received value without affecting other bits in the + * Status Register 1 and 2. + * @nor: pointer to a 'struct spi_nor'. + * @sr1: byte value to be written to the Status Register. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1) +{ + if (nor->flags & SNOR_F_HAS_16BIT_SR) + return spi_nor_write_16bit_sr_and_check(nor, sr1); + + return spi_nor_write_sr1_and_check(nor, sr1); +} + +/** + * spi_nor_write_sr2() - Write the Status Register 2 using the + * SPINOR_OP_WRSR2 (3eh) command. + * @nor: pointer to 'struct spi_nor'. + * @sr2: pointer to DMA-able buffer to write to the Status Register 2. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2) +{ + int ret; + + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, sr2, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2, + sr2, 1); + } + + if (ret) { + dev_dbg(nor->dev, "error %d writing SR2\n", ret); + return ret; + } + + return spi_nor_wait_till_ready(nor); +} + +/** + * spi_nor_read_sr2() - Read the Status Register 2 using the + * SPINOR_OP_RDSR2 (3fh) command. + * @nor: pointer to 'struct spi_nor'. + * @sr2: pointer to DMA-able buffer where the value of the + * Status Register 2 will be written. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr2, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2, + sr2, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d reading SR2\n", ret); + + return ret; +} + +/** + * spi_nor_erase_chip() - Erase the entire flash memory. + * @nor: pointer to 'struct spi_nor'. * - * Returns 0 if successful, non-zero otherwise. + * Return: 0 on success, -errno otherwise. */ -static int erase_chip(struct spi_nor *nor) +static int spi_nor_erase_chip(struct spi_nor *nor) { + int ret; + dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); if (nor->spimem) { @@ -868,10 +1212,99 @@ static int erase_chip(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); - return spi_mem_exec_op(nor->spimem, &op); + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE, + NULL, 0); } - return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); + if (ret) + dev_dbg(nor->dev, "error %d erasing chip\n", ret); + + return ret; +} + +static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) +{ + return mtd->priv; +} + +static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) +{ + size_t i; + + for (i = 0; i < size; i++) + if (table[i][0] == opcode) + return table[i][1]; + + /* No conversion found, keep input op code. */ + return opcode; +} + +static u8 spi_nor_convert_3to4_read(u8 opcode) +{ + static const u8 spi_nor_3to4_read[][2] = { + { SPINOR_OP_READ, SPINOR_OP_READ_4B }, + { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B }, + { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B }, + { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, + { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, + { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, + { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B }, + { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B }, + + { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B }, + { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B }, + { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, + ARRAY_SIZE(spi_nor_3to4_read)); +} + +static u8 spi_nor_convert_3to4_program(u8 opcode) +{ + static const u8 spi_nor_3to4_program[][2] = { + { SPINOR_OP_PP, SPINOR_OP_PP_4B }, + { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B }, + { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B }, + { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B }, + { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_program, + ARRAY_SIZE(spi_nor_3to4_program)); +} + +static u8 spi_nor_convert_3to4_erase(u8 opcode) +{ + static const u8 spi_nor_3to4_erase[][2] = { + { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B }, + { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B }, + { SPINOR_OP_SE, SPINOR_OP_SE_4B }, + }; + + return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase, + ARRAY_SIZE(spi_nor_3to4_erase)); +} + +static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) +{ + nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); + nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); + nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); + + if (!spi_nor_has_uniform_erase(nor)) { + struct spi_nor_erase_map *map = &nor->params.erase_map; + struct spi_nor_erase_type *erase; + int i; + + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + erase = &map->erase_type[i]; + erase->opcode = + spi_nor_convert_3to4_erase(erase->opcode); + } + } } static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) @@ -880,10 +1313,9 @@ static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) mutex_lock(&nor->lock); - if (nor->prepare) { - ret = nor->prepare(nor, ops); + if (nor->controller_ops && nor->controller_ops->prepare) { + ret = nor->controller_ops->prepare(nor, ops); if (ret) { - dev_err(nor->dev, "failed in the preparation.\n"); mutex_unlock(&nor->lock); return ret; } @@ -893,8 +1325,8 @@ static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) { - if (nor->unprepare) - nor->unprepare(nor, ops); + if (nor->controller_ops && nor->controller_ops->unprepare) + nor->controller_ops->unprepare(nor, ops); mutex_unlock(&nor->lock); } @@ -935,9 +1367,6 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) addr = spi_nor_convert_addr(nor, addr); - if (nor->erase) - return nor->erase(nor, addr); - if (nor->spimem) { struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1), @@ -946,6 +1375,8 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) SPI_MEM_OP_NO_DATA); return spi_mem_exec_op(nor->spimem, &op); + } else if (nor->controller_ops->erase) { + return nor->controller_ops->erase(nor, addr); } /* @@ -957,8 +1388,8 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) addr >>= 8; } - return nor->write_reg(nor, nor->erase_opcode, nor->bouncebuf, - nor->addr_width); + return nor->controller_ops->write_reg(nor, nor->erase_opcode, + nor->bouncebuf, nor->addr_width); } /** @@ -1208,7 +1639,9 @@ static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len) list_for_each_entry_safe(cmd, next, &erase_list, list) { nor->erase_opcode = cmd->opcode; while (cmd->count) { - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto destroy_erase_cmd_list; ret = spi_nor_erase_sector(nor, addr); if (ret) @@ -1263,12 +1696,13 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) { unsigned long timeout; - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto erase_err; - if (erase_chip(nor)) { - ret = -EIO; + ret = spi_nor_erase_chip(nor); + if (ret) goto erase_err; - } /* * Scale the timeout linearly with the size of the flash, with @@ -1291,7 +1725,9 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) /* "sector"-at-a-time erase */ } else if (spi_nor_has_uniform_erase(nor)) { while (len) { - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto erase_err; ret = spi_nor_erase_sector(nor, addr); if (ret) @@ -1312,7 +1748,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) goto erase_err; } - write_disable(nor); + ret = spi_nor_write_disable(nor); erase_err: spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); @@ -1320,27 +1756,6 @@ erase_err: return ret; } -/* Write status register and ensure bits in mask match written values */ -static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask) -{ - int ret; - - write_enable(nor); - ret = write_sr(nor, status_new); - if (ret) - return ret; - - ret = spi_nor_wait_till_ready(nor); - if (ret) - return ret; - - ret = read_sr(nor); - if (ret < 0) - return ret; - - return ((ret & mask) != (status_new & mask)) ? -EIO : 0; -} - static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, uint64_t *len) { @@ -1433,16 +1848,18 @@ static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) { struct mtd_info *mtd = &nor->mtd; - int status_old, status_new; + int ret, status_old, status_new; u8 mask = SR_BP2 | SR_BP1 | SR_BP0; u8 shift = ffs(mask) - 1, pow, val; loff_t lock_len; bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; bool use_top; - status_old = read_sr(nor); - if (status_old < 0) - return status_old; + ret = spi_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; + + status_old = nor->bouncebuf[0]; /* If nothing in our range is unlocked, we don't need to do anything */ if (stm_is_locked_sr(nor, ofs, len, status_old)) @@ -1502,7 +1919,7 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) if ((status_new & mask) < (status_old & mask)) return -EINVAL; - return write_sr_and_check(nor, status_new, mask); + return spi_nor_write_sr_and_check(nor, status_new); } /* @@ -1513,16 +1930,18 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) { struct mtd_info *mtd = &nor->mtd; - int status_old, status_new; + int ret, status_old, status_new; u8 mask = SR_BP2 | SR_BP1 | SR_BP0; u8 shift = ffs(mask) - 1, pow, val; loff_t lock_len; bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB; bool use_top; - status_old = read_sr(nor); - if (status_old < 0) - return status_old; + ret = spi_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; + + status_old = nor->bouncebuf[0]; /* If nothing in our range is locked, we don't need to do anything */ if (stm_is_unlocked_sr(nor, ofs, len, status_old)) @@ -1585,7 +2004,7 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) if ((status_new & mask) > (status_old & mask)) return -EINVAL; - return write_sr_and_check(nor, status_new, mask); + return spi_nor_write_sr_and_check(nor, status_new); } /* @@ -1597,13 +2016,13 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) */ static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) { - int status; + int ret; - status = read_sr(nor); - if (status < 0) - return status; + ret = spi_nor_read_sr(nor, nor->bouncebuf); + if (ret) + return ret; - return stm_is_locked_sr(nor, ofs, len, status); + return stm_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]); } static const struct spi_nor_locking_ops stm_locking_ops = { @@ -1657,242 +2076,59 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } -/* - * Write status Register and configuration register with 2 bytes - * The first byte will be written to the status register, while the - * second byte will be written to the configuration register. - * Return negative if error occurred. - */ -static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) -{ - int ret; - - write_enable(nor); - - if (nor->spimem) { - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(2, sr_cr, 1)); - - ret = spi_mem_exec_op(nor->spimem, &op); - } else { - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); - } - - if (ret < 0) { - dev_err(nor->dev, - "error while writing configuration register\n"); - return -EINVAL; - } - - ret = spi_nor_wait_till_ready(nor); - if (ret) { - dev_err(nor->dev, - "timeout while writing configuration register\n"); - return ret; - } - - return 0; -} - -/** - * macronix_quad_enable() - set QE bit in Status Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Status Register. - * - * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int macronix_quad_enable(struct spi_nor *nor) -{ - int ret, val; - - val = read_sr(nor); - if (val < 0) - return val; - if (val & SR_QUAD_EN_MX) - return 0; - - write_enable(nor); - - write_sr(nor, val | SR_QUAD_EN_MX); - - ret = spi_nor_wait_till_ready(nor); - if (ret) - return ret; - - ret = read_sr(nor); - if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { - dev_err(nor->dev, "Macronix Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - /** - * spansion_quad_enable() - set QE bit in Configuraiton Register. + * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status + * Register 1. * @nor: pointer to a 'struct spi_nor' * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function is kept for legacy purpose because it has been used for a - * long time without anybody complaining but it should be considered as - * deprecated and maybe buggy. - * First, this function doesn't care about the previous values of the Status - * and Configuration Registers when it sets the QE bit (bit 1) in the - * Configuration Register: all other bits are cleared, which may have unwanted - * side effects like removing some block protections. - * Secondly, it uses the Read Configuration Register (35h) instruction though - * some very old and few memories don't support this instruction. If a pull-up - * resistor is present on the MISO/IO1 line, we might still be able to pass the - * "read back" test because the QSPI memory doesn't recognize the command, - * so leaves the MISO/IO1 line state unchanged, hence read_cr() returns 0xFF. - * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. + * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories. * * Return: 0 on success, -errno otherwise. */ -static int spansion_quad_enable(struct spi_nor *nor) +static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor) { - u8 *sr_cr = nor->bouncebuf; int ret; - sr_cr[0] = 0; - sr_cr[1] = CR_QUAD_EN_SPAN; - ret = write_sr_cr(nor, sr_cr); + ret = spi_nor_read_sr(nor, nor->bouncebuf); if (ret) return ret; - /* read back and check it */ - ret = read_cr(nor); - if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { - dev_err(nor->dev, "Spansion Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -/** - * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function should be used with QSPI memories not supporting the Read - * Configuration Register (35h) instruction. - * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) -{ - u8 *sr_cr = nor->bouncebuf; - int ret; + if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6) + return 0; - /* Keep the current value of the Status Register. */ - ret = read_sr(nor); - if (ret < 0) { - dev_err(nor->dev, "error while reading status register\n"); - return -EINVAL; - } - sr_cr[0] = ret; - sr_cr[1] = CR_QUAD_EN_SPAN; + nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6; - return write_sr_cr(nor, sr_cr); + return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]); } /** - * spansion_read_cr_quad_enable() - set QE bit in Configuration Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function should be used with QSPI memories supporting the Read - * Configuration Register (35h) instruction. + * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status + * Register 2. + * @nor: pointer to a 'struct spi_nor'. * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. + * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories. * * Return: 0 on success, -errno otherwise. */ -static int spansion_read_cr_quad_enable(struct spi_nor *nor) +static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor) { - struct device *dev = nor->dev; - u8 *sr_cr = nor->bouncebuf; int ret; - /* Check current Quad Enable bit value. */ - ret = read_cr(nor); - if (ret < 0) { - dev_err(dev, "error while reading configuration register\n"); - return -EINVAL; - } - - if (ret & CR_QUAD_EN_SPAN) - return 0; + if (nor->flags & SNOR_F_NO_READ_CR) + return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1); - sr_cr[1] = ret | CR_QUAD_EN_SPAN; - - /* Keep the current value of the Status Register. */ - ret = read_sr(nor); - if (ret < 0) { - dev_err(dev, "error while reading status register\n"); - return -EINVAL; - } - sr_cr[0] = ret; - - ret = write_sr_cr(nor, sr_cr); + ret = spi_nor_read_cr(nor, nor->bouncebuf); if (ret) return ret; - /* Read back and check it. */ - ret = read_cr(nor); - if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { - dev_err(nor->dev, "Spansion Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -static int spi_nor_write_sr2(struct spi_nor *nor, u8 *sr2) -{ - if (nor->spimem) { - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(1, sr2, 1)); - - return spi_mem_exec_op(nor->spimem, &op); - } - - return nor->write_reg(nor, SPINOR_OP_WRSR2, sr2, 1); -} - -static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) -{ - if (nor->spimem) { - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(1, sr2, 1)); - - return spi_mem_exec_op(nor->spimem, &op); - } + if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1) + return 0; - return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1); + return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]); } /** - * sr2_bit7_quad_enable() - set QE bit in Status Register 2. + * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2. * @nor: pointer to a 'struct spi_nor' * * Set the Quad Enable (QE) bit in the Status Register 2. @@ -1903,10 +2139,11 @@ static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) * * Return: 0 on success, -errno otherwise. */ -static int sr2_bit7_quad_enable(struct spi_nor *nor) +static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor) { u8 *sr2 = nor->bouncebuf; int ret; + u8 sr2_written; /* Check current Quad Enable bit value. */ ret = spi_nor_read_sr2(nor, sr2); @@ -1918,117 +2155,23 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) /* Update the Quad Enable bit. */ *sr2 |= SR2_QUAD_EN_BIT7; - write_enable(nor); - ret = spi_nor_write_sr2(nor, sr2); - if (ret < 0) { - dev_err(nor->dev, "error while writing status register 2\n"); - return -EINVAL; - } - - ret = spi_nor_wait_till_ready(nor); - if (ret < 0) { - dev_err(nor->dev, "timeout while writing status register 2\n"); + if (ret) return ret; - } + + sr2_written = *sr2; /* Read back and check it. */ ret = spi_nor_read_sr2(nor, sr2); - if (!(ret > 0 && (*sr2 & SR2_QUAD_EN_BIT7))) { - dev_err(nor->dev, "SR2 Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -/** - * spi_nor_clear_sr_bp() - clear the Status Register Block Protection bits. - * @nor: pointer to a 'struct spi_nor' - * - * Read-modify-write function that clears the Block Protection bits from the - * Status Register without affecting other bits. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_clear_sr_bp(struct spi_nor *nor) -{ - int ret; - u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - - ret = read_sr(nor); - if (ret < 0) { - dev_err(nor->dev, "error while reading status register\n"); - return ret; - } - - write_enable(nor); - - ret = write_sr(nor, ret & ~mask); - if (ret) { - dev_err(nor->dev, "write to status register failed\n"); - return ret; - } - - ret = spi_nor_wait_till_ready(nor); if (ret) - dev_err(nor->dev, "timeout while writing status register\n"); - return ret; -} - -/** - * spi_nor_spansion_clear_sr_bp() - clear the Status Register Block Protection - * bits on spansion flashes. - * @nor: pointer to a 'struct spi_nor' - * - * Read-modify-write function that clears the Block Protection bits from the - * Status Register without affecting other bits. The function is tightly - * coupled with the spansion_quad_enable() function. Both assume that the Write - * Register with 16 bits, together with the Read Configuration Register (35h) - * instructions are supported. - * - * Return: 0 on success, -errno otherwise. - */ -static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor) -{ - int ret; - u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 *sr_cr = nor->bouncebuf; - - /* Check current Quad Enable bit value. */ - ret = read_cr(nor); - if (ret < 0) { - dev_err(nor->dev, - "error while reading configuration register\n"); return ret; - } - - /* - * When the configuration register Quad Enable bit is one, only the - * Write Status (01h) command with two data bytes may be used. - */ - if (ret & CR_QUAD_EN_SPAN) { - sr_cr[1] = ret; - ret = read_sr(nor); - if (ret < 0) { - dev_err(nor->dev, - "error while reading status register\n"); - return ret; - } - sr_cr[0] = ret & ~mask; - - ret = write_sr_cr(nor, sr_cr); - if (ret) - dev_err(nor->dev, "16-bit write register failed\n"); - return ret; + if (*sr2 != sr2_written) { + dev_dbg(nor->dev, "SR2: Read back test failed\n"); + return -EIO; } - /* - * If the Quad Enable bit is zero, use the Write Status (01h) command - * with one data byte. - */ - return spi_nor_clear_sr_bp(nor); + return 0; } /* Used when the "_ext_id" is two bytes at most */ @@ -2136,7 +2279,7 @@ static void gd25q256_default_init(struct spi_nor *nor) * indicate the quad_enable method for this case, we need * to set it in the default_init fixup hook. */ - nor->params.quad_enable = macronix_quad_enable; + nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable; } static struct spi_nor_fixups gd25q256_fixups = { @@ -2179,6 +2322,8 @@ static const struct flash_info spi_nor_ids[] = { { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) }, + { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ) }, { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) }, { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ) }, @@ -2267,6 +2412,10 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES) + .fixups = &is25lp256_fixups }, /* Macronix */ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) }, @@ -2482,6 +2631,8 @@ static const struct flash_info spi_nor_ids[] = { { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, @@ -2520,11 +2671,11 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) tmp = spi_mem_exec_op(nor->spimem, &op); } else { - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, - SPI_NOR_MAX_ID_LEN); + tmp = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id, + SPI_NOR_MAX_ID_LEN); } - if (tmp < 0) { - dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp); + if (tmp) { + dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); } @@ -2544,7 +2695,7 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct spi_nor *nor = mtd_to_spi_nor(mtd); - int ret; + ssize_t ret; dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len); @@ -2583,7 +2734,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { struct spi_nor *nor = mtd_to_spi_nor(mtd); - size_t actual; + size_t actual = 0; int ret; dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); @@ -2592,26 +2743,28 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, if (ret) return ret; - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto out; nor->sst_write_second = false; - actual = to % 2; /* Start write from odd address. */ - if (actual) { + if (to % 2) { nor->program_opcode = SPINOR_OP_BP; /* write one byte. */ ret = spi_nor_write_data(nor, to, 1, buf); if (ret < 0) - goto sst_write_err; - WARN(ret != 1, "While writing 1 byte written %i bytes\n", - (int)ret); + goto out; + WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret); ret = spi_nor_wait_till_ready(nor); if (ret) - goto sst_write_err; + goto out; + + to++; + actual++; } - to += actual; /* Write out most of the data here. */ for (; actual < len - 1; actual += 2) { @@ -2620,39 +2773,44 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, /* write two bytes. */ ret = spi_nor_write_data(nor, to, 2, buf + actual); if (ret < 0) - goto sst_write_err; - WARN(ret != 2, "While writing 2 bytes written %i bytes\n", - (int)ret); + goto out; + WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret); ret = spi_nor_wait_till_ready(nor); if (ret) - goto sst_write_err; + goto out; to += 2; nor->sst_write_second = true; } nor->sst_write_second = false; - write_disable(nor); + ret = spi_nor_write_disable(nor); + if (ret) + goto out; + ret = spi_nor_wait_till_ready(nor); if (ret) - goto sst_write_err; + goto out; /* Write out trailing byte if it exists. */ if (actual != len) { - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto out; nor->program_opcode = SPINOR_OP_BP; ret = spi_nor_write_data(nor, to, 1, buf + actual); if (ret < 0) - goto sst_write_err; - WARN(ret != 1, "While writing 1 byte written %i bytes\n", - (int)ret); + goto out; + WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret); ret = spi_nor_wait_till_ready(nor); if (ret) - goto sst_write_err; - write_disable(nor); + goto out; + actual += 1; + + ret = spi_nor_write_disable(nor); } -sst_write_err: +out: *retlen += actual; spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); return ret; @@ -2701,7 +2859,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, addr = spi_nor_convert_addr(nor, addr); - write_enable(nor); + ret = spi_nor_write_enable(nor); + if (ret) + goto write_err; + ret = spi_nor_write_data(nor, addr, page_remain, buf + i); if (ret < 0) goto write_err; @@ -2722,13 +2883,21 @@ write_err: static int spi_nor_check(struct spi_nor *nor) { if (!nor->dev || - (!nor->spimem && - (!nor->read || !nor->write || !nor->read_reg || - !nor->write_reg))) { + (!nor->spimem && !nor->controller_ops) || + (!nor->spimem && nor->controller_ops && + (!nor->controller_ops->read || + !nor->controller_ops->write || + !nor->controller_ops->read_reg || + !nor->controller_ops->write_reg))) { pr_err("spi-nor: please fill all the necessary fields!\n"); return -EINVAL; } + if (nor->spimem && nor->controller_ops) { + dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n"); + return -EINVAL; + } + return 0; } @@ -2738,10 +2907,8 @@ static int s3an_nor_setup(struct spi_nor *nor, int ret; ret = spi_nor_xread_sr(nor, nor->bouncebuf); - if (ret < 0) { - dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); + if (ret) return ret; - } nor->erase_opcode = SPINOR_OP_XSE; nor->program_opcode = SPINOR_OP_XPP; @@ -2865,7 +3032,7 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) */ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) { - int ret; + ssize_t ret; while (len) { ret = spi_nor_read_data(nor, addr, len, buf); @@ -3489,20 +3656,39 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, break; case BFPT_DWORD15_QER_SR2_BIT1_BUGGY: + /* + * Writing only one byte to the Status Register has the + * side-effect of clearing Status Register 2. + */ case BFPT_DWORD15_QER_SR2_BIT1_NO_RD: - params->quad_enable = spansion_no_read_cr_quad_enable; + /* + * Read Configuration Register (35h) instruction is not + * supported. + */ + nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR; + params->quad_enable = spi_nor_sr2_bit1_quad_enable; break; case BFPT_DWORD15_QER_SR1_BIT6: - params->quad_enable = macronix_quad_enable; + nor->flags &= ~SNOR_F_HAS_16BIT_SR; + params->quad_enable = spi_nor_sr1_bit6_quad_enable; break; case BFPT_DWORD15_QER_SR2_BIT7: - params->quad_enable = sr2_bit7_quad_enable; + nor->flags &= ~SNOR_F_HAS_16BIT_SR; + params->quad_enable = spi_nor_sr2_bit7_quad_enable; break; case BFPT_DWORD15_QER_SR2_BIT1: - params->quad_enable = spansion_read_cr_quad_enable; + /* + * JESD216 rev B or later does not specify if writing only one + * byte to the Status Register clears or not the Status + * Register 2, so let's be cautious and keep the default + * assumption of a 16-bit Write Status (01h) command. + */ + nor->flags |= SNOR_F_HAS_16BIT_SR; + + params->quad_enable = spi_nor_sr2_bit1_quad_enable; break; default: @@ -4101,7 +4287,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, err = spi_nor_read_sfdp(nor, sizeof(header), psize, param_headers); if (err < 0) { - dev_err(dev, "failed to read SFDP parameter headers\n"); + dev_dbg(dev, "failed to read SFDP parameter headers\n"); goto exit; } } @@ -4348,7 +4534,7 @@ static int spi_nor_default_setup(struct spi_nor *nor, /* Select the (Fast) Read command. */ err = spi_nor_select_read(nor, shared_mask); if (err) { - dev_err(nor->dev, + dev_dbg(nor->dev, "can't select read settings supported by both the SPI controller and memory.\n"); return err; } @@ -4356,7 +4542,7 @@ static int spi_nor_default_setup(struct spi_nor *nor, /* Select the Page Program command. */ err = spi_nor_select_pp(nor, shared_mask); if (err) { - dev_err(nor->dev, + dev_dbg(nor->dev, "can't select write settings supported by both the SPI controller and memory.\n"); return err; } @@ -4364,7 +4550,7 @@ static int spi_nor_default_setup(struct spi_nor *nor, /* Select the Sector Erase command. */ err = spi_nor_select_erase(nor); if (err) { - dev_err(nor->dev, + dev_dbg(nor->dev, "can't select erase settings supported by both the SPI controller and memory.\n"); return err; } @@ -4381,12 +4567,32 @@ static int spi_nor_setup(struct spi_nor *nor, return nor->params.setup(nor, hwcaps); } +static void atmel_set_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; +} + +static void intel_set_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; +} + +static void issi_set_default_init(struct spi_nor *nor) +{ + nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable; +} + static void macronix_set_default_init(struct spi_nor *nor) { - nor->params.quad_enable = macronix_quad_enable; + nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable; nor->params.set_4byte = macronix_set_4byte; } +static void sst_set_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; +} + static void st_micron_set_default_init(struct spi_nor *nor) { nor->flags |= SNOR_F_HAS_LOCK; @@ -4408,6 +4614,18 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor) { /* Init flash parameters based on MFR */ switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_ATMEL: + atmel_set_default_init(nor); + break; + + case SNOR_MFR_INTEL: + intel_set_default_init(nor); + break; + + case SNOR_MFR_ISSI: + issi_set_default_init(nor); + break; + case SNOR_MFR_MACRONIX: macronix_set_default_init(nor); break; @@ -4417,6 +4635,10 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor) st_micron_set_default_init(nor); break; + case SNOR_MFR_SST: + sst_set_default_init(nor); + break; + case SNOR_MFR_WINBOND: winbond_set_default_init(nor); break; @@ -4465,9 +4687,11 @@ static void spi_nor_info_init_params(struct spi_nor *nor) u8 i, erase_mask; /* Initialize legacy flash parameters and settings. */ - params->quad_enable = spansion_quad_enable; + params->quad_enable = spi_nor_sr2_bit1_quad_enable; params->set_4byte = spansion_set_4byte; params->setup = spi_nor_default_setup; + /* Default to 16-bit Write Status (01h) Command */ + nor->flags |= SNOR_F_HAS_16BIT_SR; /* Set SPI NOR sizes. */ params->size = (u64)info->sector_size * info->n_sectors; @@ -4675,25 +4899,36 @@ static int spi_nor_quad_enable(struct spi_nor *nor) return nor->params.quad_enable(nor); } +/** + * spi_nor_unlock_all() - Unlocks the entire flash memory array. + * @nor: pointer to a 'struct spi_nor'. + * + * Some SPI NOR flashes are write protected by default after a power-on reset + * cycle, in order to avoid inadvertent writes during power-up. Backward + * compatibility imposes to unlock the entire flash memory array at power-up + * by default. + */ +static int spi_nor_unlock_all(struct spi_nor *nor) +{ + if (nor->flags & SNOR_F_HAS_LOCK) + return spi_nor_unlock(&nor->mtd, 0, nor->params.size); + + return 0; +} + static int spi_nor_init(struct spi_nor *nor) { int err; - if (nor->clear_sr_bp) { - if (nor->params.quad_enable == spansion_quad_enable) - nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp; - - err = nor->clear_sr_bp(nor); - if (err) { - dev_err(nor->dev, - "fail to clear block protection bits\n"); - return err; - } + err = spi_nor_quad_enable(nor); + if (err) { + dev_dbg(nor->dev, "quad mode not supported\n"); + return err; } - err = spi_nor_quad_enable(nor); + err = spi_nor_unlock_all(nor); if (err) { - dev_err(nor->dev, "quad mode not supported\n"); + dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n"); return err; } @@ -4761,7 +4996,7 @@ static int spi_nor_set_addr_width(struct spi_nor *nor) } if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { - dev_err(nor->dev, "address width is too large: %u\n", + dev_dbg(nor->dev, "address width is too large: %u\n", nor->addr_width); return -EINVAL; } @@ -4879,16 +5114,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, if (info->flags & SPI_NOR_HAS_LOCK) nor->flags |= SNOR_F_HAS_LOCK; - /* - * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up - * with the software protection bits set. - */ - if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL || - JEDEC_MFR(nor->info) == SNOR_MFR_INTEL || - JEDEC_MFR(nor->info) == SNOR_MFR_SST || - nor->info->flags & SPI_NOR_HAS_LOCK) - nor->clear_sr_bp = spi_nor_clear_sr_bp; - /* Init flash parameters based on flash_info struct and SFDP */ spi_nor_init_params(nor); |