diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mtd/devices/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/mtd_blkdevs.c | 43 | ||||
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/davinci_nand.c | 7 | ||||
| -rw-r--r-- | drivers/mtd/nand/mxc_nand.c | 43 | ||||
| -rw-r--r-- | drivers/mtd/onenand/omap2.c | 1 |
8 files changed, 57 insertions, 48 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 7d04fb9ddcaa..b8e35a0b4d72 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -154,7 +154,8 @@ config MTD_AFS_PARTS You will still need the parsing functions to be called by the driver for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + 'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for + example. config MTD_OF_PARTS tristate "Flash partition map based on OF description" diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 6fde0a2e3567..325fab92a62c 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -49,7 +49,7 @@ config MTD_MS02NV If you want to compile this driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt>. - The module will be called ms02-nv.ko. + The module will be called ms02-nv. config MTD_DATAFLASH tristate "Support for AT45xxx DataFlash" diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 62dee54af0a5..43976aa4dbb1 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) /* Calculate flash page address; use block erase (for speed) if * we're at a block boundary and need to erase the whole block. */ - pageaddr = div_u64(instr->len, priv->page_size); + pageaddr = div_u64(instr->addr, priv->page_size); do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize; pageaddr = pageaddr << priv->page_offset; diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index a49a9c8f2cb1..aaac3b6800b7 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -47,40 +47,41 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, unsigned long block, nsect; char *buf; - block = req->sector << 9 >> tr->blkshift; - nsect = req->current_nr_sectors << 9 >> tr->blkshift; + block = blk_rq_pos(req) << 9 >> tr->blkshift; + nsect = blk_rq_cur_bytes(req) >> tr->blkshift; buf = req->buffer; if (req->cmd_type == REQ_TYPE_LINUX_BLOCK && req->cmd[0] == REQ_LB_OP_DISCARD) - return !tr->discard(dev, block, nsect); + return tr->discard(dev, block, nsect); if (!blk_fs_request(req)) - return 0; + return -EIO; - if (req->sector + req->current_nr_sectors > get_capacity(req->rq_disk)) - return 0; + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > + get_capacity(req->rq_disk)) + return -EIO; switch(rq_data_dir(req)) { case READ: for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->readsect(dev, block, buf)) - return 0; - return 1; + return -EIO; + return 0; case WRITE: if (!tr->writesect) - return 0; + return -EIO; for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->writesect(dev, block, buf)) - return 0; - return 1; + return -EIO; + return 0; default: printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req)); - return 0; + return -EIO; } } @@ -88,19 +89,18 @@ static int mtd_blktrans_thread(void *arg) { struct mtd_blktrans_ops *tr = arg; struct request_queue *rq = tr->blkcore_priv->rq; + struct request *req = NULL; /* we might get involved when memory gets low, so use PF_MEMALLOC */ current->flags |= PF_MEMALLOC; spin_lock_irq(rq->queue_lock); + while (!kthread_should_stop()) { - struct request *req; struct mtd_blktrans_dev *dev; - int res = 0; - - req = elv_next_request(rq); + int res; - if (!req) { + if (!req && !(req = blk_fetch_request(rq))) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_irq(rq->queue_lock); schedule(); @@ -119,8 +119,13 @@ static int mtd_blktrans_thread(void *arg) spin_lock_irq(rq->queue_lock); - end_request(req, res); + if (!__blk_end_request_cur(req, res)) + req = NULL; } + + if (req) + __blk_end_request_all(req, -EIO); + spin_unlock_irq(rq->queue_lock); return 0; @@ -373,7 +378,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr) } tr->blkcore_priv->rq->queuedata = tr; - blk_queue_hardsect_size(tr->blkcore_priv->rq, tr->blksize); + blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize); if (tr->discard) blk_queue_set_discard(tr->blkcore_priv->rq, blktrans_discard_request); diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 890936d0275e..f3276897859e 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -260,7 +260,7 @@ config MTD_NAND_BASLER_EXCITE help This enables the driver for the NAND flash device found on the Basler eXcite Smart Camera. If built as a module, the driver - will be named "excite_nandflash.ko". + will be named excite_nandflash. config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" @@ -282,7 +282,7 @@ config MTD_NAND_CS553X controller is enabled for NAND, and currently requires that the controller be in MMIO mode. - If you say "m", the module will be called "cs553x_nand.ko". + If you say "m", the module will be called cs553x_nand. config MTD_NAND_ATMEL tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32" diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 0119220de7d0..02700f769b8a 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -407,16 +407,17 @@ static int __init nand_davinci_probe(struct platform_device *pdev) } info->chip.ecc.mode = ecc_mode; - info->clk = clk_get(&pdev->dev, "AEMIFCLK"); + info->clk = clk_get(&pdev->dev, "aemif"); if (IS_ERR(info->clk)) { ret = PTR_ERR(info->clk); - dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); goto err_clk; } ret = clk_enable(info->clk); if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", + ret); goto err_clk_enable; } diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index f3548d048014..40c26080ecda 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READID: + host->col_addr = 0; send_read_id(host); break; @@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; + mtd->name = "mxc_nand"; /* 50 us command delay time */ this->chip_delay = 5; @@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) + if (IS_ERR(host->clk)) { + err = PTR_ERR(host->clk); goto eclk; + } clk_enable(host->clk); host->clk_act = 1; @@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->regs = ioremap(res->start, res->end - res->start + 1); if (!host->regs) { - err = -EIO; + err = -ENOMEM; goto eres; } @@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - if (info) - ret = info->suspend(info); - - /* Disable the NFC clock */ - clk_disable(nfc_clk); /* FIXME */ + if (mtd) { + ret = mtd->suspend(mtd); + /* Disable the NFC clock */ + clk_disable(host->clk); + } return ret; } static int mxcnd_resume(struct platform_device *pdev) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - /* Enable the NFC clock */ - clk_enable(nfc_clk); /* FIXME */ - if (info) - info->resume(info); + if (mtd) { + /* Enable the NFC clock */ + clk_enable(host->clk); + mtd->resume(mtd); + } return ret; } @@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = { static int __init mxc_nd_init(void) { - /* Register the device driver structure. */ - pr_info("MXC MTD nand Driver\n"); - if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) { - printk(KERN_ERR "Driver register failed for mxcnd_driver\n"); - return -ENODEV; - } - return 0; + return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index f2e9de1414df..6391e3dc8002 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -39,7 +39,6 @@ #include <mach/gpmc.h> #include <mach/onenand.h> #include <mach/gpio.h> -#include <mach/pm.h> #include <mach/dma.h> |