diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 113 |
1 files changed, 85 insertions, 28 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 77efe462b921..9334539ebf75 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -180,6 +180,13 @@ config NET_SB1000 source "drivers/net/arcnet/Kconfig" +config MII + tristate "Generic Media Independent Interface device support" + help + Most ethernet controllers have MII transceiver either as an external + or internal device. It is safe to say Y or M here even if your + ethernet card lacks MII. + source "drivers/net/phy/Kconfig" # @@ -215,13 +222,6 @@ menuconfig NET_ETHERNET if NET_ETHERNET -config MII - tristate "Generic Media Independent Interface device support" - help - Most ethernet controllers have MII transceiver either as an external - or internal device. It is safe to say Y or M here even if your - ethernet card lack MII. - config MACB tristate "Atmel MACB support" depends on HAVE_NET_MACB @@ -883,14 +883,6 @@ config BFIN_RX_DESC_NUM help Set the number of buffer packets used in driver. -config BFIN_MAC_RMII - bool "RMII PHY Interface" - depends on BFIN_MAC - default y if BFIN527_EZKIT - default n if BFIN537_STAMP - help - Use Reduced PHY MII Interface - config BFIN_MAC_USE_HWSTAMP bool "Use IEEE 1588 hwstamp" depends on BFIN_MAC && BF518 @@ -924,7 +916,7 @@ config SMC91X including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.linuxdoc.org/docs.html#howto>. + available from <http://www.tldp.org/docs.html#howto>. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -954,6 +946,8 @@ config NET_NETX config TI_DAVINCI_EMAC tristate "TI DaVinci EMAC Support" depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select TI_DAVINCI_MDIO + select TI_DAVINCI_CPDMA select PHYLIB help This driver supports TI's DaVinci Ethernet . @@ -961,6 +955,25 @@ config TI_DAVINCI_EMAC To compile this driver as a module, choose M here: the module will be called davinci_emac_driver. This is recommended. +config TI_DAVINCI_MDIO + tristate "TI DaVinci MDIO Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + select PHYLIB + help + This driver supports TI's DaVinci MDIO module. + + To compile this driver as a module, choose M here: the module + will be called davinci_mdio. This is recommended. + +config TI_DAVINCI_CPDMA + tristate "TI DaVinci CPDMA Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) + help + This driver supports TI's DaVinci CPDMA dma engine. + + To compile this driver as a module, choose M here: the module + will be called davinci_cpdma. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS @@ -1028,13 +1041,13 @@ config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 select MII - depends on ARM || SUPERH + depends on ARM || SUPERH || MN10300 help This is a driver for SMSC's LAN911x series of Ethernet chipsets including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M @@ -1042,7 +1055,7 @@ config SMC911X config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH || BLACKFIN || MIPS + depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300 select CRC32 select MII select PHYLIB @@ -1054,6 +1067,14 @@ config SMSC911X <file:Documentation/networking/net-modules.txt>. The module will be called smsc911x. +config SMSC911X_ARCH_HOOKS + def_bool n + depends on SMSC911X + help + If the arch enables this, it allows the arch to implement various + hooks for more comprehensive interrupt control and also to override + the source of the MAC address. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on ISA @@ -1516,7 +1537,7 @@ config E100 For the latest Intel PRO/100 network driver for Linux, see: - <http://appsr.intel.com/scripts-df/support_intel.asp> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. @@ -1542,9 +1563,8 @@ config FEALNX select CRC32 select MII help - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet - cards. Specifications and data at - <http://www.myson.com.hk/mtd/datasheet/>. + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet + cards. <http://www.myson.com.tw/> config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support" @@ -1718,7 +1738,7 @@ config SMSC9420 This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smsc9420. If you want to compile it as a module, say M @@ -2518,6 +2538,18 @@ config S6GMAC source "drivers/net/stmmac/Kconfig" +config PCH_GBE + tristate "PCH Gigabit Ethernet" + depends on PCI + ---help--- + This is a gigabit ethernet driver for Topcliff PCH. + Topcliff PCH is the platform controller hub that is used in Intel's + general embedded platform. + Topcliff PCH has Gigabit Ethernet interface. + Using this interface, it is able to access system devices connected + to Gigabit Ethernet. + This driver enables Gigabit Ethernet function. + endif # NETDEV_1000 # @@ -2553,7 +2585,7 @@ config CHELSIO_T1 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2585,7 +2617,7 @@ config CHELSIO_T3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2610,7 +2642,7 @@ config CHELSIO_T4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2633,7 +2665,7 @@ config CHELSIO_T4VF our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2872,6 +2904,20 @@ config QLGE To compile this driver as a module, choose M here: the module will be called qlge. +config BNA + tristate "Brocade 1010/1020 10Gb Ethernet Driver support" + depends on PCI + ---help--- + This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet + cards. + To compile this driver as a module, choose M here: the module + will be called bna. + + For general information and support, go to the Brocade support + website at: + + <http://support.brocade.com> + source "drivers/net/sfc/Kconfig" source "drivers/net/benet/Kconfig" @@ -3205,6 +3251,17 @@ config PPPOE which contains instruction on how to use this driver (under the heading "Kernel mode PPPoE"). +config PPTP + tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX + help + Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) + + This driver requires pppd plugin to work in client mode or + modified pptpd (poptop) to work in server mode. + See http://accel-pptp.sourceforge.net/ for information how to + utilize this module. + config PPPOATM tristate "PPP over ATM" depends on ATM && PPP |