diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 199 |
1 files changed, 69 insertions, 130 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index bf8890ebbc4c..e8d69b0adf90 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -366,8 +366,7 @@ config MAC89x0 read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. This module will + To compile this driver as a module, choose M here. This module will be called mac89x0. config MACSONIC @@ -380,8 +379,7 @@ config MACSONIC one of these say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. This module will + To compile this driver as a module, choose M here. This module will be called macsonic. config MACMACE @@ -619,8 +617,7 @@ config EL1 have problems. Some people suggest to ping ("man ping") a nearby machine every minute ("man cron") when using this card. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c501. config EL2 @@ -632,8 +629,7 @@ config EL2 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c503. config ELPLUS @@ -645,8 +641,7 @@ config ELPLUS this type, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c505. config EL16 @@ -657,8 +652,7 @@ config EL16 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c507. config EL3 @@ -673,8 +667,7 @@ config EL3 setup disk to disable Plug & Play mode, and to select the default media type. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c509. config 3C515 @@ -685,8 +678,7 @@ config 3C515 network card, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c515. config ELMC @@ -697,8 +689,7 @@ config ELMC the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c523. config ELMC_II @@ -709,8 +700,7 @@ config ELMC_II the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called 3c527. config VORTEX @@ -733,8 +723,7 @@ config VORTEX <file:Documentation/networking/vortex.txt> and in the comments at the beginning of <file:drivers/net/3c59x.c>. - To compile this support as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. + To compile this support as a module, choose M here. config TYPHOON tristate "3cr990 series \"Typhoon\" support" @@ -751,8 +740,7 @@ config TYPHOON the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called typhoon. config LANCE @@ -789,8 +777,7 @@ config WD80x3 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called wd. config ULTRAMCA @@ -802,8 +789,7 @@ config ULTRAMCA an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-mca. config ULTRA @@ -822,8 +808,7 @@ config ULTRA this but keep it in mind if you have such a SCSI card and have problems. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-ultra. config ULTRA32 @@ -835,8 +820,7 @@ config ULTRA32 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc-ultra32. config BFIN_MAC @@ -897,8 +881,7 @@ config SMC9194 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called smc9194. config SMC91X @@ -916,8 +899,7 @@ config SMC91X This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called smc91x. If you want to compile it as a - module, say M here and read <file:Documentation/kbuild/modules.txt> - as well as <file:Documentation/networking/net-modules.txt>. + module, say M here and read <file:Documentation/kbuild/modules.txt>. config NET_NETX tristate "NetX Ethernet support" @@ -926,8 +908,7 @@ config NET_NETX help This is support for the Hilscher netX builtin Ethernet ports - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called netx-eth. config DM9000 @@ -938,9 +919,8 @@ config DM9000 ---help--- Support for DM9000 chipset. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called dm9000. + To compile this driver as a module, choose M here. The module + will be called dm9000. config SMC911X tristate "SMSC LAN911[5678] support" @@ -980,8 +960,7 @@ config NI5010 <http://www.tldp.org/docs.html#howto>. Note that this is still experimental code. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni5010. config NI52 @@ -992,8 +971,7 @@ config NI52 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni52. config NI65 @@ -1004,8 +982,7 @@ config NI65 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ni65. source "drivers/net/tulip/Kconfig" @@ -1019,8 +996,7 @@ config AT1700 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called at1700. config DEPCA @@ -1033,8 +1009,7 @@ config DEPCA <http://www.tldp.org/docs.html#howto> as well as <file:drivers/net/depca.c>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called depca. config HP100 @@ -1045,8 +1020,7 @@ config HP100 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp100. config NET_ISA @@ -1075,8 +1049,7 @@ config E2100 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e2100. config EWRK3 @@ -1090,8 +1063,7 @@ config EWRK3 well as the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ewrk3. config EEXPRESS @@ -1105,8 +1077,7 @@ config EEXPRESS because the driver was very unreliable. We now have a new driver that should do better. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eexpress. config EEXPRESS_PRO @@ -1119,8 +1090,7 @@ config EEXPRESS_PRO driver. Please read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eepro. config HPLAN_PLUS @@ -1132,8 +1102,7 @@ config HPLAN_PLUS the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp-plus. config HPLAN @@ -1145,8 +1114,7 @@ config HPLAN the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called hp. config LP486E @@ -1165,8 +1133,7 @@ config ETH16I the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eth16i. config NE2000 @@ -1186,8 +1153,7 @@ config NE2000 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", below. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne. config ZNET @@ -1208,8 +1174,7 @@ config SEEQ8005 is for you, read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called seeq8005. config NE2_MCA @@ -1221,8 +1186,7 @@ config NE2_MCA the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne2. config IBMLANA @@ -1233,8 +1197,7 @@ config IBMLANA CONFIG_MCA to use this driver. It is both available as an in-kernel driver and as a module. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The only + To compile this driver as a module, choose M here. The only currently supported card is the IBM LAN Adapter/A for Ethernet. It will both support 16K and 32K memory windows, however a 32K window gives a better security against packet losses. Usage of multiple @@ -1248,8 +1211,7 @@ config IBMVETH This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will + To compile this driver as a module, choose M here. The module will be called ibmveth. source "drivers/net/ibm_emac/Kconfig" @@ -1279,8 +1241,7 @@ config PCNET32 answer Y here and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called pcnet32. config PCNET32_NAPI @@ -1307,8 +1268,7 @@ config AMD8111_ETH answer Y here and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called amd8111e. config AMD8111E_NAPI @@ -1362,8 +1322,7 @@ config AC3200 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ac3200. config APRICOT @@ -1374,9 +1333,8 @@ config APRICOT read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called apricot. + To compile this driver as a module, choose M here. The module + will be called apricot. config B44 tristate "Broadcom 440x/47xx ethernet support" @@ -1388,9 +1346,8 @@ config B44 or M and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called b44. + To compile this driver as a module, choose M here. The module + will be called b44. # Auto-select SSB PCI-HOST support, if possible config B44_PCI_AUTOSELECT @@ -1419,9 +1376,8 @@ config FORCEDETH read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called forcedeth. + To compile this driver as a module, choose M here. The module + will be called forcedeth. config FORCEDETH_NAPI bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" @@ -1447,9 +1403,8 @@ config CS89x0 <http://www.tldp.org/docs.html#howto> as well as <file:Documentation/networking/cs89x0.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called cs89x0. + To compile this driver as a module, choose M here. The module + will be called cs89x0. config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1465,8 +1420,7 @@ config EEPRO100 card, say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called eepro100. @@ -1493,8 +1447,7 @@ config E100 More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e100. config LNE390 @@ -1506,8 +1459,7 @@ config LNE390 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called lne390. config FEALNX @@ -1547,8 +1499,7 @@ config NE2K_PCI NetVin NV5000SC Via 86C926 SureCom NE34 Winbond Holtek HT80232 Holtek HT80229 - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne2k-pci. config NE3210 @@ -1561,8 +1512,7 @@ config NE3210 <http://www.tldp.org/docs.html#howto>. Note that this driver will NOT WORK for NE3200 cards as they are completely different. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ne3210. config ES3210 @@ -1574,8 +1524,7 @@ config ES3210 the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called es3210. config 8139CP @@ -1705,8 +1654,7 @@ config TLAN Compaq NetFlex and Olicom cards. Please read the file <file:Documentation/networking/tlan.txt> for more details. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called tlan. Please email feedback to <torben.mathiasen@compaq.com>. @@ -1996,8 +1944,7 @@ config E1000 More specific information on configuring the driver is in <file:Documentation/networking/e1000.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e1000. config E1000_NAPI @@ -2042,8 +1989,7 @@ config E1000E More specific information on configuring the driver is in <file:Documentation/networking/e1000e.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called e1000e. source "drivers/net/ixp2000/Kconfig" @@ -2076,8 +2022,7 @@ config HAMACHI the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be + To compile this driver as a module, choose M here. The module will be called hamachi. config YELLOWFIN @@ -2526,8 +2471,7 @@ config IXGBE More specific information on configuring the driver is in <file:Documentation/networking/ixgbe.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ixgbe. config IXGB @@ -2549,8 +2493,7 @@ config IXGB More specific information on configuring the driver is in <file:Documentation/networking/ixgb.txt>. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called ixgb. config IXGB_NAPI @@ -2603,8 +2546,7 @@ config MYRI10GE <http://www.myri.com/scs/download-Myri10GE.html> - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module + To compile this driver as a module, choose M here. The module will be called myri10ge. config NETXEN_NIC @@ -2828,10 +2770,9 @@ config PLIP with the PLIP support in Linux versions 1.0.x. This option enlarges your kernel by about 8 KB. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called plip. If unsure, say Y or M, in case you buy a laptop - later. + To compile this driver as a module, choose M here. The module + will be called plip. If unsure, say Y or M, in case you buy + a laptop later. config PPP tristate "PPP (point-to-point protocol) support" @@ -2861,8 +2802,7 @@ config PPP If you said Y to "Version information on all symbols" above, then you cannot compile the PPP driver into the kernel; you can then only compile it as a module. To compile this driver as a module, choose M - here and read <file:Documentation/networking/net-modules.txt>. - The module will be called ppp_generic. + here. The module will be called ppp_generic. config PPP_MULTILINK bool "PPP multilink support (EXPERIMENTAL)" @@ -3023,9 +2963,8 @@ config SLIP <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP support will enlarge your kernel by about 4 KB. If unsure, say N. - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module will be - called slip. + To compile this driver as a module, choose M here. The module + will be called slip. config SLIP_COMPRESSED bool "CSLIP compressed headers" |