1 files changed, 204 insertions, 0 deletions
diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
new file mode 100644
index 000000000000..e1ea29b0cd14
--- /dev/null
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -0,0 +1,204 @@
+/*
+ * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
+ * 
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ *  for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/if_arp.h>
+#include <net/arp.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/arcdevice.h>
+
+#define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
+
+
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length);
+static int build_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, uint8_t daddr);
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum);
+
+struct ArcProto rawmode_proto =
+{
+	.suffix		= 'r',
+	.mtu		= XMTU,
+	.rx		= rx,
+	.build_header	= build_header,
+	.prepare_tx	= prepare_tx,
+	.continue_tx    = NULL,
+	.ack_tx         = NULL
+};
+
+
+static int __init arcnet_raw_init(void)
+{
+	int count;
+
+	printk(VERSION);
+
+	for (count = 0; count < 256; count++)
+		if (arc_proto_map[count] == arc_proto_default)
+			arc_proto_map[count] = &rawmode_proto;
+
+	/* for raw mode, we only set the bcast proto if there's no better one */
+	if (arc_bcast_proto == arc_proto_default)
+		arc_bcast_proto = &rawmode_proto;
+
+	arc_proto_default = &rawmode_proto;
+	return 0;
+}
+
+static void __exit arcnet_raw_exit(void)
+{
+	arcnet_unregister_proto(&rawmode_proto);
+}
+
+module_init(arcnet_raw_init);
+module_exit(arcnet_raw_exit);
+
+MODULE_LICENSE("GPL");
+
+
+/* packet receiver */
+static void rx(struct net_device *dev, int bufnum,
+	       struct archdr *pkthdr, int length)
+{
+	struct arcnet_local *lp = dev->priv;
+	struct sk_buff *skb;
+	struct archdr *pkt = pkthdr;
+	int ofs;
+
+	BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
+
+	if (length >= MinTU)
+		ofs = 512 - length;
+	else
+		ofs = 256 - length;
+
+	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
+	if (skb == NULL) {
+		BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+		lp->stats.rx_dropped++;
+		return;
+	}
+	skb_put(skb, length + ARC_HDR_SIZE);
+	skb->dev = dev;
+
+	pkt = (struct archdr *) skb->data;
+
+	skb->mac.raw = skb->data;
+	skb_pull(skb, ARC_HDR_SIZE);
+
+	/* up to sizeof(pkt->soft) has already been copied from the card */
+	memcpy(pkt, pkthdr, sizeof(struct archdr));
+	if (length > sizeof(pkt->soft))
+		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
+				      pkt->soft.raw + sizeof(pkt->soft),
+				      length - sizeof(pkt->soft));
+
+	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+
+	skb->protocol = __constant_htons(ETH_P_ARCNET);
+;
+	netif_rx(skb);
+	dev->last_rx = jiffies;
+}
+
+
+/*
+ * Create the ARCnet hard/soft headers for raw mode.
+ * There aren't any soft headers in raw mode - not even the protocol id.
+ */
+static int build_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, uint8_t daddr)
+{
+	int hdr_size = ARC_HDR_SIZE;
+	struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+
+	/*
+	 * Set the source hardware address.
+	 *
+	 * This is pretty pointless for most purposes, but it can help in
+	 * debugging.  ARCnet does not allow us to change the source address in
+	 * the actual packet sent)
+	 */
+	pkt->hard.source = *dev->dev_addr;
+
+	/* see linux/net/ethernet/eth.c to see where I got the following */
+
+	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
+		/* 
+		 * FIXME: fill in the last byte of the dest ipaddr here to better
+		 * comply with RFC1051 in "noarp" mode.
+		 */
+		pkt->hard.dest = 0;
+		return hdr_size;
+	}
+	/* otherwise, just fill it in and go! */
+	pkt->hard.dest = daddr;
+
+	return hdr_size;	/* success */
+}
+
+
+static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
+		      int bufnum)
+{
+	struct arcnet_local *lp = dev->priv;
+	struct arc_hardware *hard = &pkt->hard;
+	int ofs;
+
+	BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
+	       lp->next_tx, lp->cur_tx, bufnum);
+
+	length -= ARC_HDR_SIZE;	/* hard header is not included in packet length */
+
+	if (length > XMTU) {
+		/* should never happen! other people already check for this. */
+		BUGMSG(D_NORMAL, "Bug!  prepare_tx with size %d (> %d)\n",
+		       length, XMTU);
+		length = XMTU;
+	}
+	if (length > MinTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length;
+	} else if (length > MTU) {
+		hard->offset[0] = 0;
+		hard->offset[1] = ofs = 512 - length - 3;
+	} else
+		hard->offset[0] = ofs = 256 - length;
+
+	BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
+	       length,ofs);
+
+	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
+	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
+
+	lp->lastload_dest = hard->dest;
+
+	return 1;		/* done */
+}