diff options
Diffstat (limited to 'drivers/net/can/c_can/c_can_main.c')
| -rw-r--r-- | drivers/net/can/c_can/c_can_main.c | 1354 |
1 files changed, 1354 insertions, 0 deletions
diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c new file mode 100644 index 000000000000..7588f70ca0fe --- /dev/null +++ b/drivers/net/can/c_can/c_can_main.c @@ -0,0 +1,1354 @@ +/* + * CAN bus driver for Bosch C_CAN controller + * + * Copyright (C) 2010 ST Microelectronics + * Bhupesh Sharma <bhupesh.sharma@st.com> + * + * Borrowed heavily from the C_CAN driver originally written by: + * Copyright (C) 2007 + * - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de> + * - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch> + * + * TX and RX NAPI implementation has been borrowed from at91 CAN driver + * written by: + * Copyright + * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de> + * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de> + * + * Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B. + * Bosch C_CAN user manual can be obtained from: + * http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/ + * users_manual_c_can.pdf + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/if_ether.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> + +#include <linux/can.h> +#include <linux/can/dev.h> +#include <linux/can/error.h> +#include <linux/can/led.h> + +#include "c_can.h" + +/* Number of interface registers */ +#define IF_ENUM_REG_LEN 11 +#define C_CAN_IFACE(reg, iface) (C_CAN_IF1_##reg + (iface) * IF_ENUM_REG_LEN) + +/* control extension register D_CAN specific */ +#define CONTROL_EX_PDR BIT(8) + +/* control register */ +#define CONTROL_SWR BIT(15) +#define CONTROL_TEST BIT(7) +#define CONTROL_CCE BIT(6) +#define CONTROL_DISABLE_AR BIT(5) +#define CONTROL_ENABLE_AR (0 << 5) +#define CONTROL_EIE BIT(3) +#define CONTROL_SIE BIT(2) +#define CONTROL_IE BIT(1) +#define CONTROL_INIT BIT(0) + +#define CONTROL_IRQMSK (CONTROL_EIE | CONTROL_IE | CONTROL_SIE) + +/* test register */ +#define TEST_RX BIT(7) +#define TEST_TX1 BIT(6) +#define TEST_TX2 BIT(5) +#define TEST_LBACK BIT(4) +#define TEST_SILENT BIT(3) +#define TEST_BASIC BIT(2) + +/* status register */ +#define STATUS_PDA BIT(10) +#define STATUS_BOFF BIT(7) +#define STATUS_EWARN BIT(6) +#define STATUS_EPASS BIT(5) +#define STATUS_RXOK BIT(4) +#define STATUS_TXOK BIT(3) + +/* error counter register */ +#define ERR_CNT_TEC_MASK 0xff +#define ERR_CNT_TEC_SHIFT 0 +#define ERR_CNT_REC_SHIFT 8 +#define ERR_CNT_REC_MASK (0x7f << ERR_CNT_REC_SHIFT) +#define ERR_CNT_RP_SHIFT 15 +#define ERR_CNT_RP_MASK (0x1 << ERR_CNT_RP_SHIFT) + +/* bit-timing register */ +#define BTR_BRP_MASK 0x3f +#define BTR_BRP_SHIFT 0 +#define BTR_SJW_SHIFT 6 +#define BTR_SJW_MASK (0x3 << BTR_SJW_SHIFT) +#define BTR_TSEG1_SHIFT 8 +#define BTR_TSEG1_MASK (0xf << BTR_TSEG1_SHIFT) +#define BTR_TSEG2_SHIFT 12 +#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT) + +/* interrupt register */ +#define INT_STS_PENDING 0x8000 + +/* brp extension register */ +#define BRP_EXT_BRPE_MASK 0x0f +#define BRP_EXT_BRPE_SHIFT 0 + +/* IFx command request */ +#define IF_COMR_BUSY BIT(15) + +/* IFx command mask */ +#define IF_COMM_WR BIT(7) +#define IF_COMM_MASK BIT(6) +#define IF_COMM_ARB BIT(5) +#define IF_COMM_CONTROL BIT(4) +#define IF_COMM_CLR_INT_PND BIT(3) +#define IF_COMM_TXRQST BIT(2) +#define IF_COMM_CLR_NEWDAT IF_COMM_TXRQST +#define IF_COMM_DATAA BIT(1) +#define IF_COMM_DATAB BIT(0) + +/* TX buffer setup */ +#define IF_COMM_TX (IF_COMM_ARB | IF_COMM_CONTROL | \ + IF_COMM_TXRQST | \ + IF_COMM_DATAA | IF_COMM_DATAB) + +/* For the low buffers we clear the interrupt bit, but keep newdat */ +#define IF_COMM_RCV_LOW (IF_COMM_MASK | IF_COMM_ARB | \ + IF_COMM_CONTROL | IF_COMM_CLR_INT_PND | \ + IF_COMM_DATAA | IF_COMM_DATAB) + +/* For the high buffers we clear the interrupt bit and newdat */ +#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT) + +/* Receive setup of message objects */ +#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL) + +/* Invalidation of message objects */ +#define IF_COMM_INVAL (IF_COMM_ARB | IF_COMM_CONTROL) + +/* IFx arbitration */ +#define IF_ARB_MSGVAL BIT(31) +#define IF_ARB_MSGXTD BIT(30) +#define IF_ARB_TRANSMIT BIT(29) + +/* IFx message control */ +#define IF_MCONT_NEWDAT BIT(15) +#define IF_MCONT_MSGLST BIT(14) +#define IF_MCONT_INTPND BIT(13) +#define IF_MCONT_UMASK BIT(12) +#define IF_MCONT_TXIE BIT(11) +#define IF_MCONT_RXIE BIT(10) +#define IF_MCONT_RMTEN BIT(9) +#define IF_MCONT_TXRQST BIT(8) +#define IF_MCONT_EOB BIT(7) +#define IF_MCONT_DLC_MASK 0xf + +#define IF_MCONT_RCV (IF_MCONT_RXIE | IF_MCONT_UMASK) +#define IF_MCONT_RCV_EOB (IF_MCONT_RCV | IF_MCONT_EOB) + +#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB) + +/* Use IF1 for RX and IF2 for TX */ +#define IF_RX 0 +#define IF_TX 1 + +/* minimum timeout for checking BUSY status */ +#define MIN_TIMEOUT_VALUE 6 + +/* Wait for ~1 sec for INIT bit */ +#define INIT_WAIT_MS 1000 + +/* c_can lec values */ +enum c_can_lec_type { + LEC_NO_ERROR = 0, + LEC_STUFF_ERROR, + LEC_FORM_ERROR, + LEC_ACK_ERROR, + LEC_BIT1_ERROR, + LEC_BIT0_ERROR, + LEC_CRC_ERROR, + LEC_UNUSED, + LEC_MASK = LEC_UNUSED, +}; + +/* c_can error types: + * Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported + */ +enum c_can_bus_error_types { + C_CAN_NO_ERROR = 0, + C_CAN_BUS_OFF, + C_CAN_ERROR_WARNING, + C_CAN_ERROR_PASSIVE, +}; + +static const struct can_bittiming_const c_can_bittiming_const = { + .name = KBUILD_MODNAME, + .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */ + .tseg1_max = 16, + .tseg2_min = 1, /* Time segment 2 = phase_seg2 */ + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 1024, /* 6-bit BRP field + 4-bit BRPE field*/ + .brp_inc = 1, +}; + +static inline void c_can_pm_runtime_get_sync(const struct c_can_priv *priv) +{ + if (priv->device) + pm_runtime_get_sync(priv->device); +} + +static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv) +{ + if (priv->device) + pm_runtime_put_sync(priv->device); +} + +static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable) +{ + if (priv->raminit) + priv->raminit(priv, enable); +} + +static void c_can_irq_control(struct c_can_priv *priv, bool enable) +{ + u32 ctrl = priv->read_reg(priv, C_CAN_CTRL_REG) & ~CONTROL_IRQMSK; + + if (enable) + ctrl |= CONTROL_IRQMSK; + + priv->write_reg(priv, C_CAN_CTRL_REG, ctrl); +} + +static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj) +{ + struct c_can_priv *priv = netdev_priv(dev); + int cnt, reg = C_CAN_IFACE(COMREQ_REG, iface); + + priv->write_reg32(priv, reg, (cmd << 16) | obj); + + for (cnt = MIN_TIMEOUT_VALUE; cnt; cnt--) { + if (!(priv->read_reg(priv, reg) & IF_COMR_BUSY)) + return; + udelay(1); + } + netdev_err(dev, "Updating object timed out\n"); +} + +static inline void c_can_object_get(struct net_device *dev, int iface, + u32 obj, u32 cmd) +{ + c_can_obj_update(dev, iface, cmd, obj); +} + +static inline void c_can_object_put(struct net_device *dev, int iface, + u32 obj, u32 cmd) +{ + c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj); +} + +/* Note: According to documentation clearing TXIE while MSGVAL is set + * is not allowed, but works nicely on C/DCAN. And that lowers the I/O + * load significantly. + */ +static void c_can_inval_tx_object(struct net_device *dev, int iface, int obj) +{ + struct c_can_priv *priv = netdev_priv(dev); + + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), 0); + c_can_object_put(dev, iface, obj, IF_COMM_INVAL); +} + +static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj) +{ + struct c_can_priv *priv = netdev_priv(dev); + + priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), 0); + c_can_inval_tx_object(dev, iface, obj); +} + +static void c_can_setup_tx_object(struct net_device *dev, int iface, + struct can_frame *frame, int idx) +{ + struct c_can_priv *priv = netdev_priv(dev); + u16 ctrl = IF_MCONT_TX | frame->len; + bool rtr = frame->can_id & CAN_RTR_FLAG; + u32 arb = IF_ARB_MSGVAL; + int i; + + if (frame->can_id & CAN_EFF_FLAG) { + arb |= frame->can_id & CAN_EFF_MASK; + arb |= IF_ARB_MSGXTD; + } else { + arb |= (frame->can_id & CAN_SFF_MASK) << 18; + } + + if (!rtr) + arb |= IF_ARB_TRANSMIT; + + /* If we change the DIR bit, we need to invalidate the buffer + * first, i.e. clear the MSGVAL flag in the arbiter. + */ + if (rtr != (bool)test_bit(idx, &priv->tx_dir)) { + u32 obj = idx + priv->msg_obj_tx_first; + + c_can_inval_msg_object(dev, iface, obj); + change_bit(idx, &priv->tx_dir); + } + + priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), arb); + + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); + + if (priv->type == BOSCH_D_CAN) { + u32 data = 0, dreg = C_CAN_IFACE(DATA1_REG, iface); + + for (i = 0; i < frame->len; i += 4, dreg += 2) { + data = (u32)frame->data[i]; + data |= (u32)frame->data[i + 1] << 8; + data |= (u32)frame->data[i + 2] << 16; + data |= (u32)frame->data[i + 3] << 24; + priv->write_reg32(priv, dreg, data); + } + } else { + for (i = 0; i < frame->len; i += 2) { + priv->write_reg(priv, + C_CAN_IFACE(DATA1_REG, iface) + i / 2, + frame->data[i] | + (frame->data[i + 1] << 8)); + } + } +} + +static int c_can_handle_lost_msg_obj(struct net_device *dev, + int iface, int objno, u32 ctrl) +{ + struct net_device_stats *stats = &dev->stats; + struct c_can_priv *priv = netdev_priv(dev); + struct can_frame *frame; + struct sk_buff *skb; + + ctrl &= ~(IF_MCONT_MSGLST | IF_MCONT_INTPND | IF_MCONT_NEWDAT); + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), ctrl); + c_can_object_put(dev, iface, objno, IF_COMM_CONTROL); + + stats->rx_errors++; + stats->rx_over_errors++; + + /* create an error msg */ + skb = alloc_can_err_skb(dev, &frame); + if (unlikely(!skb)) + return 0; + + frame->can_id |= CAN_ERR_CRTL; + frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + + netif_receive_skb(skb); + return 1; +} + +static int c_can_read_msg_object(struct net_device *dev, int iface, u32 ctrl) +{ + struct net_device_stats *stats = &dev->stats; + struct c_can_priv *priv = netdev_priv(dev); + struct can_frame *frame; + struct sk_buff *skb; + u32 arb, data; + + skb = alloc_can_skb(dev, &frame); + if (!skb) { + stats->rx_dropped++; + return -ENOMEM; + } + + frame->len = can_cc_dlc2len(ctrl & 0x0F); + + arb = priv->read_reg32(priv, C_CAN_IFACE(ARB1_REG, iface)); + + if (arb & IF_ARB_MSGXTD) + frame->can_id = (arb & CAN_EFF_MASK) | CAN_EFF_FLAG; + else + frame->can_id = (arb >> 18) & CAN_SFF_MASK; + + if (arb & IF_ARB_TRANSMIT) { + frame->can_id |= CAN_RTR_FLAG; + } else { + int i, dreg = C_CAN_IFACE(DATA1_REG, iface); + + if (priv->type == BOSCH_D_CAN) { + for (i = 0; i < frame->len; i += 4, dreg += 2) { + data = priv->read_reg32(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + frame->data[i + 2] = data >> 16; + frame->data[i + 3] = data >> 24; + } + } else { + for (i = 0; i < frame->len; i += 2, dreg++) { + data = priv->read_reg(priv, dreg); + frame->data[i] = data; + frame->data[i + 1] = data >> 8; + } + } + } + + stats->rx_packets++; + stats->rx_bytes += frame->len; + + netif_receive_skb(skb); + return 0; +} + +static void c_can_setup_receive_object(struct net_device *dev, int iface, + u32 obj, u32 mask, u32 id, u32 mcont) +{ + struct c_can_priv *priv = netdev_priv(dev); + + mask |= BIT(29); + priv->write_reg32(priv, C_CAN_IFACE(MASK1_REG, iface), mask); + + id |= IF_ARB_MSGVAL; + priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), id); + + priv->write_reg(priv, C_CAN_IFACE(MSGCTRL_REG, iface), mcont); + c_can_object_put(dev, iface, obj, IF_COMM_RCV_SETUP); +} + +static netdev_tx_t c_can_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct can_frame *frame = (struct can_frame *)skb->data; + struct c_can_priv *priv = netdev_priv(dev); + u32 idx, obj; + + if (can_dropped_invalid_skb(dev, skb)) + return NETDEV_TX_OK; + /* This is not a FIFO. C/D_CAN sends out the buffers + * prioritized. The lowest buffer number wins. + */ + idx = fls(atomic_read(&priv->tx_active)); + obj = idx + priv->msg_obj_tx_first; + + /* If this is the last buffer, stop the xmit queue */ + if (idx == priv->msg_obj_tx_num - 1) + netif_stop_queue(dev); + /* Store the message in the interface so we can call + * can_put_echo_skb(). We must do this before we enable + * transmit as we might race against do_tx(). + */ + c_can_setup_tx_object(dev, IF_TX, frame, idx); + priv->dlc[idx] = frame->len; + can_put_echo_skb(skb, dev, idx, 0); + + /* Update the active bits */ + atomic_add(BIT(idx), &priv->tx_active); + /* Start transmission */ + c_can_object_put(dev, IF_TX, obj, IF_COMM_TX); + + return NETDEV_TX_OK; +} + +static int c_can_wait_for_ctrl_init(struct net_device *dev, + struct c_can_priv *priv, u32 init) +{ + int retry = 0; + + while (init != (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_INIT)) { + udelay(10); + if (retry++ > 1000) { + netdev_err(dev, "CCTRL: set CONTROL_INIT failed\n"); + return -EIO; + } + } + return 0; +} + +static int c_can_set_bittiming(struct net_device *dev) +{ + unsigned int reg_btr, reg_brpe, ctrl_save; + u8 brp, brpe, sjw, tseg1, tseg2; + u32 ten_bit_brp; + struct c_can_priv *priv = netdev_priv(dev); + const struct can_bittiming *bt = &priv->can.bittiming; + int res; + + /* c_can provides a 6-bit brp and 4-bit brpe fields */ + ten_bit_brp = bt->brp - 1; + brp = ten_bit_brp & BTR_BRP_MASK; + brpe = ten_bit_brp >> 6; + + sjw = bt->sjw - 1; + tseg1 = bt->prop_seg + bt->phase_seg1 - 1; + tseg2 = bt->phase_seg2 - 1; + reg_btr = brp | (sjw << BTR_SJW_SHIFT) | (tseg1 << BTR_TSEG1_SHIFT) | + (tseg2 << BTR_TSEG2_SHIFT); + reg_brpe = brpe & BRP_EXT_BRPE_MASK; + + netdev_info(dev, + "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe); + + ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG); + ctrl_save &= ~CONTROL_INIT; + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_CCE | CONTROL_INIT); + res = c_can_wait_for_ctrl_init(dev, priv, CONTROL_INIT); + if (res) + return res; + + priv->write_reg(priv, C_CAN_BTR_REG, reg_btr); + priv->write_reg(priv, C_CAN_BRPEXT_REG, reg_brpe); + priv->write_reg(priv, C_CAN_CTRL_REG, ctrl_save); + + return c_can_wait_for_ctrl_init(dev, priv, 0); +} + +/* Configure C_CAN message objects for Tx and Rx purposes: + * C_CAN provides a total of 32 message objects that can be configured + * either for Tx or Rx purposes. Here the first 16 message objects are used as + * a reception FIFO. The end of reception FIFO is signified by the EoB bit + * being SET. The remaining 16 message objects are kept aside for Tx purposes. + * See user guide document for further details on configuring message + * objects. + */ +static void c_can_configure_msg_objects(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + int i; + + /* first invalidate all message objects */ + for (i = priv->msg_obj_rx_first; i <= priv->msg_obj_num; i++) + c_can_inval_msg_object(dev, IF_RX, i); + + /* setup receive message objects */ + for (i = priv->msg_obj_rx_first; i < priv->msg_obj_rx_last; i++) + c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV); + + c_can_setup_receive_object(dev, IF_RX, priv->msg_obj_rx_last, 0, 0, + IF_MCONT_RCV_EOB); +} + +static int c_can_software_reset(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + int retry = 0; + + if (priv->type != BOSCH_D_CAN) + return 0; + + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_SWR | CONTROL_INIT); + while (priv->read_reg(priv, C_CAN_CTRL_REG) & CONTROL_SWR) { + msleep(20); + if (retry++ > 100) { + netdev_err(dev, "CCTRL: software reset failed\n"); + return -EIO; + } + } + + return 0; +} + +/* Configure C_CAN chip: + * - enable/disable auto-retransmission + * - set operating mode + * - configure message objects + */ +static int c_can_chip_config(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + + err = c_can_software_reset(dev); + if (err) + return err; + + /* enable automatic retransmission */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR); + + if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) && + (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) { + /* loopback + silent mode : useful for hot self-test */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT); + } else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) { + /* loopback mode : useful for self-test function */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK); + } else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) { + /* silent mode : bus-monitoring mode */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST); + priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT); + } + + /* configure message objects */ + c_can_configure_msg_objects(dev); + + /* set a `lec` value so that we can check for updates later */ + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + + /* Clear all internal status */ + atomic_set(&priv->tx_active, 0); + priv->tx_dir = 0; + + /* set bittiming params */ + return c_can_set_bittiming(dev); +} + +static int c_can_start(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + struct pinctrl *p; + + /* basic c_can configuration */ + err = c_can_chip_config(dev); + if (err) + return err; + + /* Setup the command for new messages */ + priv->comm_rcv_high = priv->type != BOSCH_D_CAN ? + IF_COMM_RCV_LOW : IF_COMM_RCV_HIGH; + + priv->can.state = CAN_STATE_ERROR_ACTIVE; + + /* Attempt to use "active" if available else use "default" */ + p = pinctrl_get_select(priv->device, "active"); + if (!IS_ERR(p)) + pinctrl_put(p); + else + pinctrl_pm_select_default_state(priv->device); + + return 0; +} + +static void c_can_stop(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + + c_can_irq_control(priv, false); + + /* put ctrl to init on stop to end ongoing transmission */ + priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_INIT); + + /* deactivate pins */ + pinctrl_pm_select_sleep_state(dev->dev.parent); + priv->can.state = CAN_STATE_STOPPED; +} + +static int c_can_set_mode(struct net_device *dev, enum can_mode mode) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + + switch (mode) { + case CAN_MODE_START: + err = c_can_start(dev); + if (err) + return err; + netif_wake_queue(dev); + c_can_irq_control(priv, true); + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int __c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + unsigned int reg_err_counter; + struct c_can_priv *priv = netdev_priv(dev); + + reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); + bec->rxerr = (reg_err_counter & ERR_CNT_REC_MASK) >> + ERR_CNT_REC_SHIFT; + bec->txerr = reg_err_counter & ERR_CNT_TEC_MASK; + + return 0; +} + +static int c_can_get_berr_counter(const struct net_device *dev, + struct can_berr_counter *bec) +{ + struct c_can_priv *priv = netdev_priv(dev); + int err; + + c_can_pm_runtime_get_sync(priv); + err = __c_can_get_berr_counter(dev, bec); + c_can_pm_runtime_put_sync(priv); + + return err; +} + +static void c_can_do_tx(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + u32 idx, obj, pkts = 0, bytes = 0, pend, clr; + + if (priv->msg_obj_tx_last > 32) + pend = priv->read_reg32(priv, C_CAN_INTPND3_REG); + else + pend = priv->read_reg(priv, C_CAN_INTPND2_REG); + clr = pend; + + while ((idx = ffs(pend))) { + idx--; + pend &= ~BIT(idx); + obj = idx + priv->msg_obj_tx_first; + + /* We use IF_RX interface instead of IF_TX because we + * are called from c_can_poll(), which runs inside + * NAPI. We are not trasmitting. + */ + c_can_inval_tx_object(dev, IF_RX, obj); + can_get_echo_skb(dev, idx, NULL); + bytes += priv->dlc[idx]; + pkts++; + } + + /* Clear the bits in the tx_active mask */ + atomic_sub(clr, &priv->tx_active); + + if (clr & BIT(priv->msg_obj_tx_num - 1)) + netif_wake_queue(dev); + + if (pkts) { + stats->tx_bytes += bytes; + stats->tx_packets += pkts; + can_led_event(dev, CAN_LED_EVENT_TX); + } +} + +/* If we have a gap in the pending bits, that means we either + * raced with the hardware or failed to readout all upper + * objects in the last run due to quota limit. + */ +static u32 c_can_adjust_pending(u32 pend, u32 rx_mask) +{ + u32 weight, lasts; + + if (pend == rx_mask) + return pend; + + /* If the last set bit is larger than the number of pending + * bits we have a gap. + */ + weight = hweight32(pend); + lasts = fls(pend); + + /* If the bits are linear, nothing to do */ + if (lasts == weight) + return pend; + + /* Find the first set bit after the gap. We walk backwards + * from the last set bit. + */ + for (lasts--; pend & BIT(lasts - 1); lasts--) + ; + + return pend & ~GENMASK(lasts - 1, 0); +} + +static inline void c_can_rx_object_get(struct net_device *dev, + struct c_can_priv *priv, u32 obj) +{ + c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high); +} + +static inline void c_can_rx_finalize(struct net_device *dev, + struct c_can_priv *priv, u32 obj) +{ + if (priv->type != BOSCH_D_CAN) + c_can_object_get(dev, IF_RX, obj, IF_COMM_CLR_NEWDAT); +} + +static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv, + u32 pend, int quota) +{ + u32 pkts = 0, ctrl, obj; + + while ((obj = ffs(pend)) && quota > 0) { + pend &= ~BIT(obj - 1); + + c_can_rx_object_get(dev, priv, obj); + ctrl = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, IF_RX)); + + if (ctrl & IF_MCONT_MSGLST) { + int n = c_can_handle_lost_msg_obj(dev, IF_RX, obj, ctrl); + + pkts += n; + quota -= n; + continue; + } + + /* This really should not happen, but this covers some + * odd HW behaviour. Do not remove that unless you + * want to brick your machine. + */ + if (!(ctrl & IF_MCONT_NEWDAT)) + continue; + + /* read the data from the message object */ + c_can_read_msg_object(dev, IF_RX, ctrl); + + c_can_rx_finalize(dev, priv, obj); + + pkts++; + quota--; + } + + return pkts; +} + +static inline u32 c_can_get_pending(struct c_can_priv *priv) +{ + u32 pend; + + if (priv->msg_obj_rx_last > 16) + pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG); + else + pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG); + + return pend; +} + +/* theory of operation: + * + * c_can core saves a received CAN message into the first free message + * object it finds free (starting with the lowest). Bits NEWDAT and + * INTPND are set for this message object indicating that a new message + * has arrived. + * + * We clear the newdat bit right away. + * + * This can result in packet reordering when the readout is slow. + */ +static int c_can_do_rx_poll(struct net_device *dev, int quota) +{ + struct c_can_priv *priv = netdev_priv(dev); + u32 pkts = 0, pend = 0, toread, n; + + while (quota > 0) { + if (!pend) { + pend = c_can_get_pending(priv); + if (!pend) + break; + /* If the pending field has a gap, handle the + * bits above the gap first. + */ + toread = c_can_adjust_pending(pend, + priv->msg_obj_rx_mask); + } else { + toread = pend; + } + /* Remove the bits from pend */ + pend &= ~toread; + /* Read the objects */ + n = c_can_read_objects(dev, priv, toread, quota); + pkts += n; + quota -= n; + } + + if (pkts) + can_led_event(dev, CAN_LED_EVENT_RX); + + return pkts; +} + +static int c_can_handle_state_change(struct net_device *dev, + enum c_can_bus_error_types error_type) +{ + unsigned int reg_err_counter; + unsigned int rx_err_passive; + struct c_can_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + struct can_frame *cf; + struct sk_buff *skb; + struct can_berr_counter bec; + + switch (error_type) { + case C_CAN_NO_ERROR: + priv->can.state = CAN_STATE_ERROR_ACTIVE; + break; + case C_CAN_ERROR_WARNING: + /* error warning state */ + priv->can.can_stats.error_warning++; + priv->can.state = CAN_STATE_ERROR_WARNING; + break; + case C_CAN_ERROR_PASSIVE: + /* error passive state */ + priv->can.can_stats.error_passive++; + priv->can.state = CAN_STATE_ERROR_PASSIVE; + break; + case C_CAN_BUS_OFF: + /* bus-off state */ + priv->can.state = CAN_STATE_BUS_OFF; + priv->can.can_stats.bus_off++; + break; + default: + break; + } + + /* propagate the error condition to the CAN stack */ + skb = alloc_can_err_skb(dev, &cf); + if (unlikely(!skb)) + return 0; + + __c_can_get_berr_counter(dev, &bec); + reg_err_counter = priv->read_reg(priv, C_CAN_ERR_CNT_REG); + rx_err_passive = (reg_err_counter & ERR_CNT_RP_MASK) >> + ERR_CNT_RP_SHIFT; + + switch (error_type) { + case C_CAN_NO_ERROR: + /* error warning state */ + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = CAN_ERR_CRTL_ACTIVE; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + break; + case C_CAN_ERROR_WARNING: + /* error warning state */ + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = (bec.txerr > bec.rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + + break; + case C_CAN_ERROR_PASSIVE: + /* error passive state */ + cf->can_id |= CAN_ERR_CRTL; + if (rx_err_passive) + cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE; + if (bec.txerr > 127) + cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE; + + cf->data[6] = bec.txerr; + cf->data[7] = bec.rxerr; + break; + case C_CAN_BUS_OFF: + /* bus-off state */ + cf->can_id |= CAN_ERR_BUSOFF; + can_bus_off(dev); + break; + default: + break; + } + + stats->rx_packets++; + stats->rx_bytes += cf->len; + netif_receive_skb(skb); + + return 1; +} + +static int c_can_handle_bus_err(struct net_device *dev, + enum c_can_lec_type lec_type) +{ + struct c_can_priv *priv = netdev_priv(dev); + struct net_device_stats *stats = &dev->stats; + struct can_frame *cf; + struct sk_buff *skb; + + /* early exit if no lec update or no error. + * no lec update means that no CAN bus event has been detected + * since CPU wrote 0x7 value to status reg. + */ + if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR) + return 0; + + if (!(priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)) + return 0; + + /* common for all type of bus errors */ + priv->can.can_stats.bus_error++; + stats->rx_errors++; + + /* propagate the error condition to the CAN stack */ + skb = alloc_can_err_skb(dev, &cf); + if (unlikely(!skb)) + return 0; + + /* check for 'last error code' which tells us the + * type of the last error to occur on the CAN bus + */ + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + + switch (lec_type) { + case LEC_STUFF_ERROR: + netdev_dbg(dev, "stuff error\n"); + cf->data[2] |= CAN_ERR_PROT_STUFF; + break; + case LEC_FORM_ERROR: + netdev_dbg(dev, "form error\n"); + cf->data[2] |= CAN_ERR_PROT_FORM; + break; + case LEC_ACK_ERROR: + netdev_dbg(dev, "ack error\n"); + cf->data[3] = CAN_ERR_PROT_LOC_ACK; + break; + case LEC_BIT1_ERROR: + netdev_dbg(dev, "bit1 error\n"); + cf->data[2] |= CAN_ERR_PROT_BIT1; + break; + case LEC_BIT0_ERROR: + netdev_dbg(dev, "bit0 error\n"); + cf->data[2] |= CAN_ERR_PROT_BIT0; + break; + case LEC_CRC_ERROR: + netdev_dbg(dev, "CRC error\n"); + cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; + break; + default: + break; + } + + stats->rx_packets++; + stats->rx_bytes += cf->len; + netif_receive_skb(skb); + return 1; +} + +static int c_can_poll(struct napi_struct *napi, int quota) +{ + struct net_device *dev = napi->dev; + struct c_can_priv *priv = netdev_priv(dev); + u16 curr, last = priv->last_status; + int work_done = 0; + + /* Only read the status register if a status interrupt was pending */ + if (atomic_xchg(&priv->sie_pending, 0)) { + priv->last_status = priv->read_reg(priv, C_CAN_STS_REG); + curr = priv->last_status; + /* Ack status on C_CAN. D_CAN is self clearing */ + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + } else { + /* no change detected ... */ + curr = last; + } + + /* handle state changes */ + if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) { + netdev_dbg(dev, "entered error warning state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING); + } + + if ((curr & STATUS_EPASS) && (!(last & STATUS_EPASS))) { + netdev_dbg(dev, "entered error passive state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE); + } + + if ((curr & STATUS_BOFF) && (!(last & STATUS_BOFF))) { + netdev_dbg(dev, "entered bus off state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_BUS_OFF); + goto end; + } + + /* handle bus recovery events */ + if ((!(curr & STATUS_BOFF)) && (last & STATUS_BOFF)) { + netdev_dbg(dev, "left bus off state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_PASSIVE); + } + + if ((!(curr & STATUS_EPASS)) && (last & STATUS_EPASS)) { + netdev_dbg(dev, "left error passive state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_ERROR_WARNING); + } + + if ((!(curr & STATUS_EWARN)) && (last & STATUS_EWARN)) { + netdev_dbg(dev, "left error warning state\n"); + work_done += c_can_handle_state_change(dev, C_CAN_NO_ERROR); + } + + /* handle lec errors on the bus */ + work_done += c_can_handle_bus_err(dev, curr & LEC_MASK); + + /* Handle Tx/Rx events. We do this unconditionally */ + work_done += c_can_do_rx_poll(dev, (quota - work_done)); + c_can_do_tx(dev); + +end: + if (work_done < quota) { + napi_complete_done(napi, work_done); + /* enable all IRQs if we are not in bus off state */ + if (priv->can.state != CAN_STATE_BUS_OFF) + c_can_irq_control(priv, true); + } + + return work_done; +} + +static irqreturn_t c_can_isr(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct c_can_priv *priv = netdev_priv(dev); + int reg_int; + + reg_int = priv->read_reg(priv, C_CAN_INT_REG); + if (!reg_int) + return IRQ_NONE; + + /* save for later use */ + if (reg_int & INT_STS_PENDING) + atomic_set(&priv->sie_pending, 1); + + /* disable all interrupts and schedule the NAPI */ + c_can_irq_control(priv, false); + napi_schedule(&priv->napi); + + return IRQ_HANDLED; +} + +static int c_can_open(struct net_device *dev) +{ + int err; + struct c_can_priv *priv = netdev_priv(dev); + + c_can_pm_runtime_get_sync(priv); + c_can_reset_ram(priv, true); + + /* open the can device */ + err = open_candev(dev); + if (err) { + netdev_err(dev, "failed to open can device\n"); + goto exit_open_fail; + } + + /* register interrupt handler */ + err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name, + dev); + if (err < 0) { + netdev_err(dev, "failed to request interrupt\n"); + goto exit_irq_fail; + } + + /* start the c_can controller */ + err = c_can_start(dev); + if (err) + goto exit_start_fail; + + can_led_event(dev, CAN_LED_EVENT_OPEN); + + napi_enable(&priv->napi); + /* enable status change, error and module interrupts */ + c_can_irq_control(priv, true); + netif_start_queue(dev); + + return 0; + +exit_start_fail: + free_irq(dev->irq, dev); +exit_irq_fail: + close_candev(dev); +exit_open_fail: + c_can_reset_ram(priv, false); + c_can_pm_runtime_put_sync(priv); + return err; +} + +static int c_can_close(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + + netif_stop_queue(dev); + napi_disable(&priv->napi); + c_can_stop(dev); + free_irq(dev->irq, dev); + close_candev(dev); + + c_can_reset_ram(priv, false); + c_can_pm_runtime_put_sync(priv); + + can_led_event(dev, CAN_LED_EVENT_STOP); + + return 0; +} + +struct net_device *alloc_c_can_dev(int msg_obj_num) +{ + struct net_device *dev; + struct c_can_priv *priv; + int msg_obj_tx_num = msg_obj_num / 2; + + dev = alloc_candev(struct_size(priv, dlc, msg_obj_tx_num), + msg_obj_tx_num); + if (!dev) + return NULL; + + priv = netdev_priv(dev); + priv->msg_obj_num = msg_obj_num; + priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num; + priv->msg_obj_rx_first = 1; + priv->msg_obj_rx_last = + priv->msg_obj_rx_first + priv->msg_obj_rx_num - 1; + priv->msg_obj_rx_mask = GENMASK(priv->msg_obj_rx_num - 1, 0); + + priv->msg_obj_tx_num = msg_obj_tx_num; + priv->msg_obj_tx_first = priv->msg_obj_rx_last + 1; + priv->msg_obj_tx_last = + priv->msg_obj_tx_first + priv->msg_obj_tx_num - 1; + + netif_napi_add(dev, &priv->napi, c_can_poll, priv->msg_obj_rx_num); + + priv->dev = dev; + priv->can.bittiming_const = &c_can_bittiming_const; + priv->can.do_set_mode = c_can_set_mode; + priv->can.do_get_berr_counter = c_can_get_berr_counter; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK | + CAN_CTRLMODE_LISTENONLY | + CAN_CTRLMODE_BERR_REPORTING; + + return dev; +} +EXPORT_SYMBOL_GPL(alloc_c_can_dev); + +#ifdef CONFIG_PM +int c_can_power_down(struct net_device *dev) +{ + u32 val; + unsigned long time_out; + struct c_can_priv *priv = netdev_priv(dev); + + if (!(dev->flags & IFF_UP)) + return 0; + + WARN_ON(priv->type != BOSCH_D_CAN); + + /* set PDR value so the device goes to power down mode */ + val = priv->read_reg(priv, C_CAN_CTRL_EX_REG); + val |= CONTROL_EX_PDR; + priv->write_reg(priv, C_CAN_CTRL_EX_REG, val); + + /* Wait for the PDA bit to get set */ + time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS); + while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) && + time_after(time_out, jiffies)) + cpu_relax(); + + if (time_after(jiffies, time_out)) + return -ETIMEDOUT; + + c_can_stop(dev); + + c_can_reset_ram(priv, false); + c_can_pm_runtime_put_sync(priv); + + return 0; +} +EXPORT_SYMBOL_GPL(c_can_power_down); + +int c_can_power_up(struct net_device *dev) +{ + u32 val; + unsigned long time_out; + struct c_can_priv *priv = netdev_priv(dev); + int ret; + + if (!(dev->flags & IFF_UP)) + return 0; + + WARN_ON(priv->type != BOSCH_D_CAN); + + c_can_pm_runtime_get_sync(priv); + c_can_reset_ram(priv, true); + + /* Clear PDR and INIT bits */ + val = priv->read_reg(priv, C_CAN_CTRL_EX_REG); + val &= ~CONTROL_EX_PDR; + priv->write_reg(priv, C_CAN_CTRL_EX_REG, val); + val = priv->read_reg(priv, C_CAN_CTRL_REG); + val &= ~CONTROL_INIT; + priv->write_reg(priv, C_CAN_CTRL_REG, val); + + /* Wait for the PDA bit to get clear */ + time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS); + while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) && + time_after(time_out, jiffies)) + cpu_relax(); + + if (time_after(jiffies, time_out)) { + ret = -ETIMEDOUT; + goto err_out; + } + + ret = c_can_start(dev); + if (ret) + goto err_out; + + c_can_irq_control(priv, true); + + return 0; + +err_out: + c_can_reset_ram(priv, false); + c_can_pm_runtime_put_sync(priv); + + return ret; +} +EXPORT_SYMBOL_GPL(c_can_power_up); +#endif + +void free_c_can_dev(struct net_device *dev) +{ + struct c_can_priv *priv = netdev_priv(dev); + + netif_napi_del(&priv->napi); + free_candev(dev); +} +EXPORT_SYMBOL_GPL(free_c_can_dev); + +static const struct net_device_ops c_can_netdev_ops = { + .ndo_open = c_can_open, + .ndo_stop = c_can_close, + .ndo_start_xmit = c_can_start_xmit, + .ndo_change_mtu = can_change_mtu, +}; + +int register_c_can_dev(struct net_device *dev) +{ + int err; + + /* Deactivate pins to prevent DRA7 DCAN IP from being + * stuck in transition when module is disabled. + * Pins are activated in c_can_start() and deactivated + * in c_can_stop() + */ + pinctrl_pm_select_sleep_state(dev->dev.parent); + + dev->flags |= IFF_ECHO; /* we support local echo */ + dev->netdev_ops = &c_can_netdev_ops; + c_can_set_ethtool_ops(dev); + + err = register_candev(dev); + if (!err) + devm_can_led_init(dev); + return err; +} +EXPORT_SYMBOL_GPL(register_c_can_dev); + +void unregister_c_can_dev(struct net_device *dev) +{ + unregister_candev(dev); +} +EXPORT_SYMBOL_GPL(unregister_c_can_dev); + +MODULE_AUTHOR("Bhupesh Sharma <bhupesh.sharma@st.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("CAN bus driver for Bosch C_CAN controller"); |