diff options
Diffstat (limited to 'drivers/net/can/sja1000/plx_pci.c')
| -rw-r--r-- | drivers/net/can/sja1000/plx_pci.c | 65 |
1 files changed, 64 insertions, 1 deletions
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index f8ff25c8ee2e..9bcdefea138a 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -46,7 +46,8 @@ MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, " "esd CAN-PCIe/2000, " "Connect Tech Inc. CANpro/104-Plus Opto (CRG001), " "IXXAT PC-I 04/PCI, " - "ELCUS CAN-200-PCI") + "ELCUS CAN-200-PCI, " + "ASEM DUAL CAN-RAW") MODULE_LICENSE("GPL v2"); #define PLX_PCI_MAX_CHAN 2 @@ -70,7 +71,9 @@ struct plx_pci_card { */ #define PLX_LINT1_EN 0x1 /* Local interrupt 1 enable */ +#define PLX_LINT1_POL (1 << 1) /* Local interrupt 1 polarity */ #define PLX_LINT2_EN (1 << 3) /* Local interrupt 2 enable */ +#define PLX_LINT2_POL (1 << 4) /* Local interrupt 2 polarity */ #define PLX_PCI_INT_EN (1 << 6) /* PCI Interrupt Enable */ #define PLX_PCI_RESET (1 << 30) /* PCI Adapter Software Reset */ @@ -92,6 +95,9 @@ struct plx_pci_card { */ #define PLX_PCI_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL) +/* OCR setting for ASEM Dual CAN raw */ +#define ASEM_PCI_OCR 0xfe + /* * In the CDR register, you should set CBP to 1. * You will probably also want to set the clock divider value to 7 @@ -145,10 +151,20 @@ struct plx_pci_card { #define MOXA_PCI_VENDOR_ID 0x1393 #define MOXA_PCI_DEVICE_ID 0x0100 +#define ASEM_RAW_CAN_VENDOR_ID 0x10b5 +#define ASEM_RAW_CAN_DEVICE_ID 0x9030 +#define ASEM_RAW_CAN_SUB_VENDOR_ID 0x3000 +#define ASEM_RAW_CAN_SUB_DEVICE_ID 0x1001 +#define ASEM_RAW_CAN_SUB_DEVICE_ID_BIS 0x1002 +#define ASEM_RAW_CAN_RST_REGISTER 0x54 +#define ASEM_RAW_CAN_RST_MASK_CAN1 0x20 +#define ASEM_RAW_CAN_RST_MASK_CAN2 0x04 + static void plx_pci_reset_common(struct pci_dev *pdev); static void plx9056_pci_reset_common(struct pci_dev *pdev); static void plx_pci_reset_marathon_pci(struct pci_dev *pdev); static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev); +static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev); struct plx_pci_channel_map { u32 bar; @@ -269,6 +285,14 @@ static struct plx_pci_card_info plx_pci_card_info_moxa = { /* based on PLX9052 */ }; +static struct plx_pci_card_info plx_pci_card_info_asem_dual_can = { + "ASEM Dual CAN raw PCI", 2, + PLX_PCI_CAN_CLOCK, ASEM_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} }, + &plx_pci_reset_asem_dual_can_raw + /* based on PLX9030 */ +}; + static const struct pci_device_id plx_pci_tbl[] = { { /* Adlink PCI-7841/cPCI-7841 */ @@ -375,6 +399,20 @@ static const struct pci_device_id plx_pci_tbl[] = { 0, 0, (kernel_ulong_t)&plx_pci_card_info_moxa }, + { + /* ASEM Dual CAN raw */ + ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, + ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_asem_dual_can + }, + { + /* ASEM Dual CAN raw -new model */ + ASEM_RAW_CAN_VENDOR_ID, ASEM_RAW_CAN_DEVICE_ID, + ASEM_RAW_CAN_SUB_VENDOR_ID, ASEM_RAW_CAN_SUB_DEVICE_ID_BIS, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_asem_dual_can + }, { 0,} }; MODULE_DEVICE_TABLE(pci, plx_pci_tbl); @@ -524,6 +562,31 @@ static void plx_pci_reset_marathon_pcie(struct pci_dev *pdev) } } +/* Special reset function for ASEM Dual CAN raw card */ +static void plx_pci_reset_asem_dual_can_raw(struct pci_dev *pdev) +{ + void __iomem *bar0_addr; + u8 tmpval; + + plx_pci_reset_common(pdev); + + bar0_addr = pci_iomap(pdev, 0, 0); + if (!bar0_addr) { + dev_err(&pdev->dev, "Failed to remap reset space 0 (BAR0)\n"); + return; + } + + /* reset the two SJA1000 chips */ + tmpval = ioread8(bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + tmpval &= ~(ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2); + iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + usleep_range(300, 400); + tmpval |= ASEM_RAW_CAN_RST_MASK_CAN1 | ASEM_RAW_CAN_RST_MASK_CAN2; + iowrite8(tmpval, bar0_addr + ASEM_RAW_CAN_RST_REGISTER); + usleep_range(300, 400); + pci_iounmap(pdev, bar0_addr); +} + static void plx_pci_del_card(struct pci_dev *pdev) { struct plx_pci_card *card = pci_get_drvdata(pdev); |