diff options
Diffstat (limited to 'drivers/net/chelsio/vsc8244.c')
| -rw-r--r-- | drivers/net/chelsio/vsc8244.c | 367 |
1 files changed, 0 insertions, 367 deletions
diff --git a/drivers/net/chelsio/vsc8244.c b/drivers/net/chelsio/vsc8244.c deleted file mode 100644 index 251d4859c91d..000000000000 --- a/drivers/net/chelsio/vsc8244.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * This file is part of the Chelsio T2 Ethernet driver. - * - * Copyright (C) 2005 Chelsio Communications. All rights reserved. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this - * release for licensing terms and conditions. - */ - -#include "common.h" -#include "cphy.h" -#include "elmer0.h" - -#ifndef ADVERTISE_PAUSE_CAP -# define ADVERTISE_PAUSE_CAP 0x400 -#endif -#ifndef ADVERTISE_PAUSE_ASYM -# define ADVERTISE_PAUSE_ASYM 0x800 -#endif - -/* Gigabit MII registers */ -#ifndef MII_CTRL1000 -# define MII_CTRL1000 9 -#endif - -#ifndef ADVERTISE_1000FULL -# define ADVERTISE_1000FULL 0x200 -# define ADVERTISE_1000HALF 0x100 -#endif - -/* VSC8244 PHY specific registers. */ -enum { - VSC8244_INTR_ENABLE = 25, - VSC8244_INTR_STATUS = 26, - VSC8244_AUX_CTRL_STAT = 28, -}; - -enum { - VSC_INTR_RX_ERR = 1 << 0, - VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */ - VSC_INTR_CABLE = 1 << 2, /* cable impairment */ - VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */ - VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */ - VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */ - VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */ - VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */ - VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */ - VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */ - VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */ - VSC_INTR_LINK_CHG = 1 << 13, /* link change */ - VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */ -}; - -#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \ - VSC_INTR_NEG_DONE) -#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \ - VSC_INTR_ENABLE) - -/* PHY specific auxiliary control & status register fields */ -#define S_ACSR_ACTIPHY_TMR 0 -#define M_ACSR_ACTIPHY_TMR 0x3 -#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR) - -#define S_ACSR_SPEED 3 -#define M_ACSR_SPEED 0x3 -#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED) - -#define S_ACSR_DUPLEX 5 -#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX) - -#define S_ACSR_ACTIPHY 6 -#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY) - -/* - * Reset the PHY. This PHY completes reset immediately so we never wait. - */ -static int vsc8244_reset(struct cphy *cphy, int wait) -{ - int err; - unsigned int ctl; - - err = simple_mdio_read(cphy, MII_BMCR, &ctl); - if (err) - return err; - - ctl &= ~BMCR_PDOWN; - ctl |= BMCR_RESET; - return simple_mdio_write(cphy, MII_BMCR, ctl); -} - -static int vsc8244_intr_enable(struct cphy *cphy) -{ - simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK); - - /* Enable interrupts through Elmer */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer |= ELMER0_GP_BIT1; - if (is_T2(cphy->adapter)) - elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } - - return 0; -} - -static int vsc8244_intr_disable(struct cphy *cphy) -{ - simple_mdio_write(cphy, VSC8244_INTR_ENABLE, 0); - - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer &= ~ELMER0_GP_BIT1; - if (is_T2(cphy->adapter)) - elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4); - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } - - return 0; -} - -static int vsc8244_intr_clear(struct cphy *cphy) -{ - u32 val; - u32 elmer; - - /* Clear PHY interrupts by reading the register. */ - simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val); - - if (t1_is_asic(cphy->adapter)) { - t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); - elmer |= ELMER0_GP_BIT1; - if (is_T2(cphy->adapter)) - elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); - } - - return 0; -} - -/* - * Force the PHY speed and duplex. This also disables auto-negotiation, except - * for 1Gb/s, where auto-negotiation is mandatory. - */ -static int vsc8244_set_speed_duplex(struct cphy *phy, int speed, int duplex) -{ - int err; - unsigned int ctl; - - err = simple_mdio_read(phy, MII_BMCR, &ctl); - if (err) - return err; - - if (speed >= 0) { - ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); - if (speed == SPEED_100) - ctl |= BMCR_SPEED100; - else if (speed == SPEED_1000) - ctl |= BMCR_SPEED1000; - } - if (duplex >= 0) { - ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE); - if (duplex == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; - } - if (ctl & BMCR_SPEED1000) /* auto-negotiation required for 1Gb/s */ - ctl |= BMCR_ANENABLE; - return simple_mdio_write(phy, MII_BMCR, ctl); -} - -int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits) -{ - int ret; - unsigned int val; - - ret = mdio_read(phy, mmd, reg, &val); - if (!ret) - ret = mdio_write(phy, mmd, reg, val | bits); - return ret; -} - -static int vsc8244_autoneg_enable(struct cphy *cphy) -{ - return t1_mdio_set_bits(cphy, 0, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -} - -static int vsc8244_autoneg_restart(struct cphy *cphy) -{ - return t1_mdio_set_bits(cphy, 0, MII_BMCR, BMCR_ANRESTART); -} - -static int vsc8244_advertise(struct cphy *phy, unsigned int advertise_map) -{ - int err; - unsigned int val = 0; - - err = simple_mdio_read(phy, MII_CTRL1000, &val); - if (err) - return err; - - val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); - if (advertise_map & ADVERTISED_1000baseT_Half) - val |= ADVERTISE_1000HALF; - if (advertise_map & ADVERTISED_1000baseT_Full) - val |= ADVERTISE_1000FULL; - - err = simple_mdio_write(phy, MII_CTRL1000, val); - if (err) - return err; - - val = 1; - if (advertise_map & ADVERTISED_10baseT_Half) - val |= ADVERTISE_10HALF; - if (advertise_map & ADVERTISED_10baseT_Full) - val |= ADVERTISE_10FULL; - if (advertise_map & ADVERTISED_100baseT_Half) - val |= ADVERTISE_100HALF; - if (advertise_map & ADVERTISED_100baseT_Full) - val |= ADVERTISE_100FULL; - if (advertise_map & ADVERTISED_PAUSE) - val |= ADVERTISE_PAUSE_CAP; - if (advertise_map & ADVERTISED_ASYM_PAUSE) - val |= ADVERTISE_PAUSE_ASYM; - return simple_mdio_write(phy, MII_ADVERTISE, val); -} - -static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok, - int *speed, int *duplex, int *fc) -{ - unsigned int bmcr, status, lpa, adv; - int err, sp = -1, dplx = -1, pause = 0; - - err = simple_mdio_read(cphy, MII_BMCR, &bmcr); - if (!err) - err = simple_mdio_read(cphy, MII_BMSR, &status); - if (err) - return err; - - if (link_ok) { - /* - * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it - * once more to get the current link state. - */ - if (!(status & BMSR_LSTATUS)) - err = simple_mdio_read(cphy, MII_BMSR, &status); - if (err) - return err; - *link_ok = (status & BMSR_LSTATUS) != 0; - } - if (!(bmcr & BMCR_ANENABLE)) { - dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; - if (bmcr & BMCR_SPEED1000) - sp = SPEED_1000; - else if (bmcr & BMCR_SPEED100) - sp = SPEED_100; - else - sp = SPEED_10; - } else if (status & BMSR_ANEGCOMPLETE) { - err = simple_mdio_read(cphy, VSC8244_AUX_CTRL_STAT, &status); - if (err) - return err; - - dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; - sp = G_ACSR_SPEED(status); - if (sp == 0) - sp = SPEED_10; - else if (sp == 1) - sp = SPEED_100; - else - sp = SPEED_1000; - - if (fc && dplx == DUPLEX_FULL) { - err = simple_mdio_read(cphy, MII_LPA, &lpa); - if (!err) - err = simple_mdio_read(cphy, MII_ADVERTISE, - &adv); - if (err) - return err; - - if (lpa & adv & ADVERTISE_PAUSE_CAP) - pause = PAUSE_RX | PAUSE_TX; - else if ((lpa & ADVERTISE_PAUSE_CAP) && - (lpa & ADVERTISE_PAUSE_ASYM) && - (adv & ADVERTISE_PAUSE_ASYM)) - pause = PAUSE_TX; - else if ((lpa & ADVERTISE_PAUSE_ASYM) && - (adv & ADVERTISE_PAUSE_CAP)) - pause = PAUSE_RX; - } - } - if (speed) - *speed = sp; - if (duplex) - *duplex = dplx; - if (fc) - *fc = pause; - return 0; -} - -static int vsc8244_intr_handler(struct cphy *cphy) -{ - unsigned int cause; - int err, cphy_cause = 0; - - err = simple_mdio_read(cphy, VSC8244_INTR_STATUS, &cause); - if (err) - return err; - - cause &= INTR_MASK; - if (cause & CFG_CHG_INTR_MASK) - cphy_cause |= cphy_cause_link_change; - if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO)) - cphy_cause |= cphy_cause_fifo_error; - return cphy_cause; -} - -static void vsc8244_destroy(struct cphy *cphy) -{ - kfree(cphy); -} - -static struct cphy_ops vsc8244_ops = { - .destroy = vsc8244_destroy, - .reset = vsc8244_reset, - .interrupt_enable = vsc8244_intr_enable, - .interrupt_disable = vsc8244_intr_disable, - .interrupt_clear = vsc8244_intr_clear, - .interrupt_handler = vsc8244_intr_handler, - .autoneg_enable = vsc8244_autoneg_enable, - .autoneg_restart = vsc8244_autoneg_restart, - .advertise = vsc8244_advertise, - .set_speed_duplex = vsc8244_set_speed_duplex, - .get_link_status = vsc8244_get_link_status -}; - -static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, - struct mdio_ops *mdio_ops) -{ - struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL); - - if (!cphy) - return NULL; - - cphy_init(cphy, adapter, phy_addr, &vsc8244_ops, mdio_ops); - - return cphy; -} - - -static int vsc8244_phy_reset(adapter_t* adapter) -{ - return 0; -} - -struct gphy t1_vsc8244_ops = { - vsc8244_phy_create, - vsc8244_phy_reset -}; - - |