diff options
Diffstat (limited to 'drivers/net/dsa/lan9303-core.c')
| -rw-r--r-- | drivers/net/dsa/lan9303-core.c | 34 |
1 files changed, 25 insertions, 9 deletions
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index e03ff1f267bb..438e46af03e9 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -22,6 +22,10 @@ */ #define LAN9303_CHIP_REV 0x14 # define LAN9303_CHIP_ID 0x9303 +# define LAN9352_CHIP_ID 0x9352 +# define LAN9353_CHIP_ID 0x9353 +# define LAN9354_CHIP_ID 0x9354 +# define LAN9355_CHIP_ID 0x9355 #define LAN9303_IRQ_CFG 0x15 # define LAN9303_IRQ_CFG_IRQ_ENABLE BIT(8) # define LAN9303_IRQ_CFG_IRQ_POL BIT(4) @@ -32,6 +36,7 @@ #define LAN9303_INT_EN 0x17 # define LAN9303_INT_EN_PHY_INT2_EN BIT(27) # define LAN9303_INT_EN_PHY_INT1_EN BIT(26) +#define LAN9303_BYTE_ORDER 0x19 #define LAN9303_HW_CFG 0x1D # define LAN9303_HW_CFG_READY BIT(27) # define LAN9303_HW_CFG_AMDX_EN_PORT2 BIT(26) @@ -851,15 +856,12 @@ static int lan9303_check_device(struct lan9303 *chip) if (ret) { dev_err(chip->dev, "failed to read chip revision register: %d\n", ret); - if (!chip->reset_gpio) { - dev_dbg(chip->dev, - "hint: maybe failed due to missing reset GPIO\n"); - } return ret; } - if ((reg >> 16) != LAN9303_CHIP_ID) { - dev_err(chip->dev, "expecting LAN9303 chip, but found: %X\n", + if (((reg >> 16) != LAN9303_CHIP_ID) && + ((reg >> 16) != LAN9354_CHIP_ID)) { + dev_err(chip->dev, "unexpected device found: LAN%4.4X\n", reg >> 16); return -ENODEV; } @@ -875,7 +877,7 @@ static int lan9303_check_device(struct lan9303 *chip) if (ret) dev_warn(chip->dev, "failed to disable switching %d\n", ret); - dev_info(chip->dev, "Found LAN9303 rev. %u\n", reg & 0xffff); + dev_info(chip->dev, "Found LAN%4.4X rev. %u\n", (reg >> 16), reg & 0xffff); ret = lan9303_detect_phy_setup(chip); if (ret) { @@ -1090,7 +1092,7 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port, if (!dsa_port_is_user(dp)) return 0; - vlan_vid_add(dp->cpu_dp->master, htons(ETH_P_8021Q), port); + vlan_vid_add(dsa_port_to_master(dp), htons(ETH_P_8021Q), port); return lan9303_enable_processing_port(chip, port); } @@ -1103,7 +1105,7 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port) if (!dsa_port_is_user(dp)) return; - vlan_vid_del(dp->cpu_dp->master, htons(ETH_P_8021Q), port); + vlan_vid_del(dsa_port_to_master(dp), htons(ETH_P_8021Q), port); lan9303_disable_processing_port(chip, port); lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN); @@ -1349,6 +1351,7 @@ static int lan9303_probe_reset_gpio(struct lan9303 *chip, int lan9303_probe(struct lan9303 *chip, struct device_node *np) { int ret; + u32 reg; mutex_init(&chip->indirect_mutex); mutex_init(&chip->alr_mutex); @@ -1359,6 +1362,19 @@ int lan9303_probe(struct lan9303 *chip, struct device_node *np) lan9303_handle_reset(chip); + /* First read to the device. This is a Dummy read to ensure MDIO */ + /* access is in 32-bit sync. */ + ret = lan9303_read(chip->regmap, LAN9303_BYTE_ORDER, ®); + if (ret) { + dev_err(chip->dev, "failed to access the device: %d\n", + ret); + if (!chip->reset_gpio) { + dev_dbg(chip->dev, + "hint: maybe failed due to missing reset GPIO\n"); + } + return ret; + } + ret = lan9303_check_device(chip); if (ret) return ret; |