diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index c026d15721f6..508380f80875 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -258,6 +258,10 @@ static int ksz9477_reset_switch(struct ksz_device *dev) data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; ksz_write16(dev, REG_SW_MAC_CTRL_2, data16); + if (dev->synclko_125) + ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, + SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ); + return 0; } @@ -1165,6 +1169,62 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) return interface; } +static void ksz9477_port_mmd_write(struct ksz_device *dev, int port, + u8 dev_addr, u16 reg_addr, u16 val) +{ + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, + MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr)); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, + MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr)); + ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); +} + +static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) +{ + /* Apply PHY settings to address errata listed in + * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565 + * Silicon Errata and Data Sheet Clarification documents: + * + * Register settings are needed to improve PHY receive performance + */ + ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b); + ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032); + ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c); + ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060); + ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001); + + /* Transmit waveform amplitude can be improved + * (1000BASE-T, 100BASE-TX, 10BASE-Te) + */ + ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0); + + /* Energy Efficient Ethernet (EEE) feature select must + * be manually disabled (except on KSZ8565 which is 100Mbit) + */ + if (dev->features & GBIT_SUPPORT) + ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); + + /* Register settings are required to meet data sheet + * supply current specifications + */ + ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff); + ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee); +} + static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) { u8 data8; @@ -1203,6 +1263,8 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, false); + if (dev->phy_errata_9477) + ksz9477_phy_errata_setup(dev, port); } else { /* force flow control */ ksz_port_cfg(dev, port, REG_PORT_CTRL_0, @@ -1474,6 +1536,7 @@ struct ksz_chip_data { int num_statics; int cpu_ports; int port_cnt; + bool phy_errata_9477; }; static const struct ksz_chip_data ksz9477_switch_chips[] = { @@ -1485,6 +1548,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = { .num_statics = 16, .cpu_ports = 0x7F, /* can be configured as cpu port */ .port_cnt = 7, /* total physical port count */ + .phy_errata_9477 = true, }, { .chip_id = 0x00989700, @@ -1494,6 +1558,7 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = { .num_statics = 16, .cpu_ports = 0x7F, /* can be configured as cpu port */ .port_cnt = 7, /* total physical port count */ + .phy_errata_9477 = true, }, { .chip_id = 0x00989300, @@ -1522,6 +1587,7 @@ static int ksz9477_switch_init(struct ksz_device *dev) dev->num_statics = chip->num_statics; dev->port_cnt = chip->port_cnt; dev->cpu_ports = chip->cpu_ports; + dev->phy_errata_9477 = chip->phy_errata_9477; break; } |