diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.c')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 2420 |
1 files changed, 2024 insertions, 396 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 022466ca1c19..e74c6b406172 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -10,6 +10,7 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/netdevice.h> +#include <linux/of_irq.h> #include <linux/of_mdio.h> #include <linux/of_net.h> #include <linux/of_platform.h> @@ -18,10 +19,16 @@ #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> #include <net/dsa.h> #include "mt7530.h" +static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct mt753x_pcs, pcs); +} + /* String, offset, and register size in bytes if different from 4 bytes */ static const struct mt7530_mib_desc mt7530_mib[] = { MIB_DESC(1, 0x00, "TxDrop"), @@ -45,6 +52,7 @@ static const struct mt7530_mib_desc mt7530_mib[] = { MIB_DESC(2, 0x48, "TxBytes"), MIB_DESC(1, 0x60, "RxDrop"), MIB_DESC(1, 0x64, "RxFiltering"), + MIB_DESC(1, 0x68, "RxUnicast"), MIB_DESC(1, 0x6c, "RxMulticast"), MIB_DESC(1, 0x70, "RxBroadcast"), MIB_DESC(1, 0x74, "RxAlignErr"), @@ -66,58 +74,11 @@ static const struct mt7530_mib_desc mt7530_mib[] = { MIB_DESC(1, 0xb8, "RxArlDrop"), }; -static int -mt7623_trgmii_write(struct mt7530_priv *priv, u32 reg, u32 val) -{ - int ret; - - ret = regmap_write(priv->ethernet, TRGMII_BASE(reg), val); - if (ret < 0) - dev_err(priv->dev, - "failed to priv write register\n"); - return ret; -} - -static u32 -mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg) -{ - int ret; - u32 val; - - ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val); - if (ret < 0) { - dev_err(priv->dev, - "failed to priv read register\n"); - return ret; - } - - return val; -} - -static void -mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg, - u32 mask, u32 set) -{ - u32 val; - - val = mt7623_trgmii_read(priv, reg); - val &= ~mask; - val |= set; - mt7623_trgmii_write(priv, reg, val); -} - -static void -mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val) -{ - mt7623_trgmii_rmw(priv, reg, 0, val); -} - -static void -mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val) -{ - mt7623_trgmii_rmw(priv, reg, val, 0); -} - +/* Since phy_device has not yet been created and + * phy_{read,write}_mmd_indirect is not available, we provide our own + * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers + * to complete this function. + */ static int core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad) { @@ -286,6 +247,12 @@ mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val) } static u32 +_mt7530_unlocked_read(struct mt7530_dummy_poll *p) +{ + return mt7530_mii_read(p->priv, p->reg); +} + +static u32 _mt7530_read(struct mt7530_dummy_poll *p) { struct mii_bus *bus = p->priv->bus; @@ -405,6 +372,8 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, int i; reg[1] |= vid & CVID_MASK; + reg[1] |= ATA2_IVL; + reg[1] |= ATA2_FID(FID_BRIDGED); reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER; reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP; /* STATIC_ENT indicate that entry is static wouldn't @@ -424,8 +393,9 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); } +/* Setup TX circuit including relevant PAD and driving */ static int -mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) +mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, trgint, i, xtal; @@ -439,7 +409,7 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) return -EINVAL; } - switch (mode) { + switch (interface) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; /* PLL frequency: 125MHz */ @@ -461,7 +431,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) } break; default: - dev_err(priv->dev, "xMII mode %d not supported\n", mode); + dev_err(priv->dev, "xMII interface %d not supported\n", + interface); return -EINVAL; } @@ -478,38 +449,26 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), TD_DM_DRVP(8) | TD_DM_DRVN(8)); - /* Setup core clock for MT7530 */ - if (!trgint) { - /* Disable MT7530 core clock */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - - /* Disable PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we - * provide our own core_write_mmd_indirect to complete this - * function. - */ - core_write_mmd_indirect(priv, - CORE_GSWPLL_GRP1, - MDIO_MMD_VEND2, - 0); + /* Disable MT7530 core and TRGMII Tx clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, + REG_GSWCK_EN | REG_TRGMIICK_EN); - /* Set core clock into 500Mhz */ - core_write(priv, CORE_GSWPLL_GRP2, - RG_GSWPLL_POSDIV_500M(1) | - RG_GSWPLL_FBKDIV_500M(25)); + /* Setup core clock for MT7530 */ + /* Disable PLL */ + core_write(priv, CORE_GSWPLL_GRP1, 0); - /* Enable PLL */ - core_write(priv, CORE_GSWPLL_GRP1, - RG_GSWPLL_EN_PRE | - RG_GSWPLL_POSDIV_200M(2) | - RG_GSWPLL_FBKDIV_200M(32)); + /* Set core clock into 500Mhz */ + core_write(priv, CORE_GSWPLL_GRP2, + RG_GSWPLL_POSDIV_500M(1) | + RG_GSWPLL_FBKDIV_500M(25)); - /* Enable MT7530 core clock */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); - } + /* Enable PLL */ + core_write(priv, CORE_GSWPLL_GRP1, + RG_GSWPLL_EN_PRE | + RG_GSWPLL_POSDIV_200M(2) | + RG_GSWPLL_FBKDIV_200M(32)); /* Setup the MT7530 TRGMII Tx Clock */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta)); @@ -523,6 +482,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); + + /* Enable MT7530 core and TRGMII Tx clocks */ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN | REG_TRGMIICK_EN); @@ -530,31 +491,115 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) for (i = 0 ; i < NUM_TRGMII_CTRL; i++) mt7530_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_MASK, RD_TAP(16)); - else - if (priv->id != ID_MT7621) - mt7623_trgmii_set(priv, GSW_INTF_MODE, - INTF_MODE_TRGMII); - return 0; } -static int -mt7623_pad_clk_setup(struct dsa_switch *ds) +static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) { - struct mt7530_priv *priv = ds->priv; - int i; + u32 val; - for (i = 0 ; i < NUM_TRGMII_CTRL; i++) - mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i), - TD_DM_DRVP(8) | TD_DM_DRVN(8)); + val = mt7530_read(priv, MT7531_TOP_SIG_SR); - mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL); - mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST); + return (val & PAD_DUAL_SGMII_EN) != 0; +} +static int +mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) +{ return 0; } static void +mt7531_pll_setup(struct mt7530_priv *priv) +{ + u32 top_sig; + u32 hwstrap; + u32 xtal; + u32 val; + + if (mt7531_dual_sgmii_supported(priv)) + return; + + val = mt7530_read(priv, MT7531_CREV); + top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); + hwstrap = mt7530_read(priv, MT7531_HWTRAP); + if ((val & CHIP_REV_M) > 0) + xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ : + HWTRAP_XTAL_FSEL_25MHZ; + else + xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK; + + /* Step 1 : Disable MT7531 COREPLL */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val &= ~EN_COREPLL; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + /* Step 2: switch to XTAL output */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= SW_CLKSW; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_EN; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + /* Step 3: disable PLLGP and enable program PLLGP */ + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= SW_PLLGP; + mt7530_write(priv, MT7531_PLLGP_EN, val); + + /* Step 4: program COREPLL output frequency to 500MHz */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_POSDIV_M; + val |= 2 << RG_COREPLL_POSDIV_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + usleep_range(25, 35); + + switch (xtal) { + case HWTRAP_XTAL_FSEL_25MHZ: + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_M; + val |= 0x140000 << RG_COREPLL_SDM_PCW_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + break; + case HWTRAP_XTAL_FSEL_40MHZ: + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_M; + val |= 0x190000 << RG_COREPLL_SDM_PCW_S; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + break; + } + + /* Set feedback divide ratio update signal to high */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val |= RG_COREPLL_SDM_PCW_CHG; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + /* Wait for at least 16 XTAL clocks */ + usleep_range(10, 20); + + /* Step 5: set feedback divide ratio update signal to low */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val &= ~RG_COREPLL_SDM_PCW_CHG; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + /* Enable 325M clock for SGMII */ + mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); + + /* Enable 250SSC clock for RGMII */ + mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); + + /* Step 6: Enable MT7531 PLL */ + val = mt7530_read(priv, MT7531_PLLGP_CR0); + val |= RG_COREPLL_EN; + mt7530_write(priv, MT7531_PLLGP_CR0, val); + + val = mt7530_read(priv, MT7531_PLLGP_EN); + val |= EN_COREPLL; + mt7530_write(priv, MT7531_PLLGP_EN, val); + usleep_range(25, 35); +} + +static void mt7530_mib_reset(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; @@ -563,30 +608,240 @@ mt7530_mib_reset(struct dsa_switch *ds) mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); } -static void -mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) +static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum) { - u32 mask = PMCR_TX_EN | PMCR_RX_EN; + return mdiobus_read_nested(priv->bus, port, regnum); +} - if (enable) - mt7530_set(priv, MT7530_PMCR_P(port), mask); - else - mt7530_clear(priv, MT7530_PMCR_P(port), mask); +static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 val) +{ + return mdiobus_write_nested(priv->bus, port, regnum, val); } -static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) +static int +mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, + int regnum) { - struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 reg, val; + int ret; - return mdiobus_read_nested(priv->bus, port, regnum); + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | regnum; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad); + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + ret = val & MT7531_MDIO_RW_DATA_MASK; +out: + mutex_unlock(&bus->mdio_lock); + + return ret; } -static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum, - u16 val) +static int +mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, + int regnum, u32 data) { - struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + u32 val, reg; + int ret; - return mdiobus_write_nested(priv->bus, port, regnum, val); + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | regnum; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_DEV_ADDR(devad) | data; + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 val; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_REG_ADDR(regnum); + + mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, + !(val & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + ret = val & MT7531_MDIO_RW_DATA_MASK; +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 data) +{ + struct mii_bus *bus = priv->bus; + struct mt7530_dummy_poll p; + int ret; + u32 reg; + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + + reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) | + MT7531_MDIO_REG_ADDR(regnum) | data; + + mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); + + ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, + !(reg & MT7531_PHY_ACS_ST), 20, 100000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + goto out; + } + +out: + mutex_unlock(&bus->mdio_lock); + + return ret; +} + +static int +mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum) +{ + int devad; + int ret; + + if (regnum & MII_ADDR_C45) { + devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; + ret = mt7531_ind_c45_phy_read(priv, port, devad, + regnum & MII_REGADDR_C45_MASK); + } else { + ret = mt7531_ind_c22_phy_read(priv, port, regnum); + } + + return ret; +} + +static int +mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum, + u16 data) +{ + int devad; + int ret; + + if (regnum & MII_ADDR_C45) { + devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; + ret = mt7531_ind_c45_phy_write(priv, port, devad, + regnum & MII_REGADDR_C45_MASK, + data); + } else { + ret = mt7531_ind_c22_phy_write(priv, port, regnum, data); + } + + return ret; +} + +static int +mt753x_phy_read(struct mii_bus *bus, int port, int regnum) +{ + struct mt7530_priv *priv = bus->priv; + + return priv->info->phy_read(priv, port, regnum); +} + +static int +mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val) +{ + struct mt7530_priv *priv = bus->priv; + + return priv->info->phy_write(priv, port, regnum, val); } static void @@ -633,6 +888,46 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } +static int +mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) +{ + struct mt7530_priv *priv = ds->priv; + unsigned int secs = msecs / 1000; + unsigned int tmp_age_count; + unsigned int error = -1; + unsigned int age_count; + unsigned int age_unit; + + /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */ + if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1)) + return -ERANGE; + + /* iterate through all possible age_count to find the closest pair */ + for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { + unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1; + + if (tmp_age_unit <= AGE_UNIT_MAX) { + unsigned int tmp_error = secs - + (tmp_age_count + 1) * (tmp_age_unit + 1); + + /* found a closer pair */ + if (error > tmp_error) { + error = tmp_error; + age_count = tmp_age_count; + age_unit = tmp_age_unit; + } + + /* found the exact match, so break the loop */ + if (!error) + break; + } + } + + mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit)); + + return 0; +} + static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; @@ -650,7 +945,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) case P5_INTF_SEL_PHY_P0: /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */ val |= MHWTRAP_PHY0_SEL; - /* fall through */ + fallthrough; case P5_INTF_SEL_PHY_P4: /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */ val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; @@ -705,29 +1000,40 @@ unlock_exit: } static int -mt7530_cpu_port_enable(struct mt7530_priv *priv, - int port) +mt753x_cpu_port_enable(struct dsa_switch *ds, int port) { + struct mt7530_priv *priv = ds->priv; + int ret; + + /* Setup max capability of CPU port at first */ + if (priv->info->cpu_port_config) { + ret = priv->info->cpu_port_config(ds, port); + if (ret) + return ret; + } + /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); - /* Disable auto learning on the cpu port */ - mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); - - /* Unknown unicast frame fordwarding to the cpu port */ - mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port))); + /* Disable flooding by default */ + mt7530_rmw(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK, + BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); /* Set CPU port number */ if (priv->id == ID_MT7621) mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); /* CPU port gets connected to all user ports of - * the switch + * the switch. */ mt7530_write(priv, MT7530_PCR_P(port), PCR_MATRIX(dsa_user_ports(priv->ds))); + /* Set to fallback mode for independent VLAN learning */ + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_FALLBACK_MODE); + return 0; } @@ -735,22 +1041,24 @@ static int mt7530_port_enable(struct dsa_switch *ds, int port, struct phy_device *phy) { + struct dsa_port *dp = dsa_to_port(ds, port); struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex); /* Allow the user port gets connected to the cpu port and also * restore the port matrix if the port is the member of a certain * bridge. */ - priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); + if (dsa_port_is_user(dp)) { + struct dsa_port *cpu_dp = dp->cpu_dp; + + priv->ports[port].pm |= PCR_MATRIX(BIT(cpu_dp->index)); + } priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_port_set_status(priv, port, 0); + mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); @@ -762,9 +1070,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex); /* Clear up all port matrix which could be restored in the next @@ -773,11 +1078,58 @@ mt7530_port_disable(struct dsa_switch *ds, int port) priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); - mt7530_port_set_status(priv, port, 0); + mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); mutex_unlock(&priv->reg_mutex); } +static int +mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + int length; + u32 val; + + /* When a new MTU is set, DSA always set the CPU port's MTU to the + * largest MTU of the slave ports. Because the switch only has a global + * RX length register, only allowing CPU port here is enough. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + val = mt7530_mii_read(priv, MT7530_GMACCR); + val &= ~MAX_RX_PKT_LEN_MASK; + + /* RX length also includes Ethernet header, MTK tag, and FCS length */ + length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; + if (length <= 1522) { + val |= MAX_RX_PKT_LEN_1522; + } else if (length <= 1536) { + val |= MAX_RX_PKT_LEN_1536; + } else if (length <= 1552) { + val |= MAX_RX_PKT_LEN_1552; + } else { + val &= ~MAX_RX_JUMBO_MASK; + val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); + val |= MAX_RX_PKT_LEN_JUMBO; + } + + mt7530_mii_write(priv, MT7530_GMACCR, val); + + mutex_unlock(&bus->mdio_lock); + + return 0; +} + +static int +mt7530_port_max_mtu(struct dsa_switch *ds, int port) +{ + return MT7530_MAX_MTU; +} + static void mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) { @@ -803,34 +1155,79 @@ mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) break; } - mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state); + mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK(FID_BRIDGED), + FID_PST(FID_BRIDGED, stp_state)); +} + +static int +mt7530_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | + BR_BCAST_FLOOD)) + return -EINVAL; + + return 0; +} + +static int +mt7530_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct mt7530_priv *priv = ds->priv; + + if (flags.mask & BR_LEARNING) + mt7530_rmw(priv, MT7530_PSC_P(port), SA_DIS, + flags.val & BR_LEARNING ? 0 : SA_DIS); + + if (flags.mask & BR_FLOOD) + mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)), + flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0); + + if (flags.mask & BR_MCAST_FLOOD) + mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)), + flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0); + + if (flags.mask & BR_BCAST_FLOOD) + mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)), + flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0); + + return 0; } static int mt7530_port_bridge_join(struct dsa_switch *ds, int port, - struct net_device *bridge) + struct dsa_bridge bridge, bool *tx_fwd_offload, + struct netlink_ext_ack *extack) { + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; + struct dsa_port *cpu_dp = dp->cpu_dp; + u32 port_bitmap = BIT(cpu_dp->index); struct mt7530_priv *priv = ds->priv; - u32 port_bitmap = BIT(MT7530_CPU_PORT); - int i; mutex_lock(&priv->reg_mutex); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + dsa_switch_for_each_user_port(other_dp, ds) { + int other_port = other_dp->index; + + if (dp == other_dp) + continue; + /* Add this port to the port matrix of the other ports in the * same bridge. If the port is disabled, port matrix is kept * and not being setup until the port becomes enabled. */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - mt7530_set(priv, MT7530_PCR_P(i), - PCR_MATRIX(BIT(port))); - priv->ports[i].pm |= PCR_MATRIX(BIT(port)); + if (!dsa_port_offloads_bridge(other_dp, &bridge)) + continue; - port_bitmap |= BIT(i); - } + if (priv->ports[other_port].enable) + mt7530_set(priv, MT7530_PCR_P(other_port), + PCR_MATRIX(BIT(port))); + priv->ports[other_port].pm |= PCR_MATRIX(BIT(port)); + + port_bitmap |= BIT(other_port); } /* Add the all other ports to this port matrix. */ @@ -839,6 +1236,10 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port, PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap)); priv->ports[port].pm |= PCR_MATRIX(port_bitmap); + /* Set to fallback mode for independent VLAN learning */ + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_FALLBACK_MODE); + mutex_unlock(&priv->reg_mutex); return 0; @@ -851,14 +1252,22 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) bool all_user_ports_removed = true; int i; - /* When a port is removed from the bridge, the port would be set up - * back to the default as is at initial boot which is a VLAN-unaware - * port. + /* This is called after .port_bridge_leave when leaving a VLAN-aware + * bridge. Don't set standalone ports to fallback mode. */ - mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, - MT7530_PORT_MATRIX_MODE); - mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK, - VLAN_ATTR(MT7530_VLAN_TRANSPARENT)); + if (dsa_port_bridge_dev_get(dsa_to_port(ds, port))) + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_FALLBACK_MODE); + + mt7530_rmw(priv, MT7530_PVC_P(port), + VLAN_ATTR_MASK | PVC_EG_TAG_MASK | ACC_FRM_MASK, + VLAN_ATTR(MT7530_VLAN_TRANSPARENT) | + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT) | + MT7530_VLAN_ACC_ALL); + + /* Set PVID to 0 */ + mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, + G0_PORT_VID_DEF); for (i = 0; i < MT7530_NUM_PORTS; i++) { if (dsa_is_user_port(ds, i) && @@ -872,10 +1281,13 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) * the CPU port get out of VLAN filtering mode. */ if (all_user_ports_removed) { - mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT), + struct dsa_port *dp = dsa_to_port(ds, port); + struct dsa_port *cpu_dp = dp->cpu_dp; + + mt7530_write(priv, MT7530_PCR_P(cpu_dp->index), PCR_MATRIX(dsa_user_ports(priv->ds))); - mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), - PORT_SPEC_TAG); + mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG + | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } } @@ -884,52 +1296,56 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - /* The real fabric path would be decided on the membership in the - * entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS - * means potential VLAN can be consisting of certain subset of all - * ports. - */ - mt7530_rmw(priv, MT7530_PCR_P(port), - PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS)); - /* Trapped into security mode allows packet forwarding through VLAN * table lookup. */ - mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, - MT7530_PORT_SECURITY_MODE); + if (dsa_is_user_port(ds, port)) { + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_SECURITY_MODE); + mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, + G0_PORT_VID(priv->ports[port].pvid)); + + /* Only accept tagged frames if PVID is not set */ + if (!priv->ports[port].pvid) + mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, + MT7530_VLAN_ACC_TAGGED); + } /* Set the port as a user port which is to be able to recognize VID * from incoming packets before fetching entry within the VLAN table. */ - mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK, - VLAN_ATTR(MT7530_VLAN_USER)); + mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK | PVC_EG_TAG_MASK, + VLAN_ATTR(MT7530_VLAN_USER) | + PVC_EG_TAG(MT7530_VLAN_EG_DISABLED)); } static void mt7530_port_bridge_leave(struct dsa_switch *ds, int port, - struct net_device *bridge) + struct dsa_bridge bridge) { + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; + struct dsa_port *cpu_dp = dp->cpu_dp; struct mt7530_priv *priv = ds->priv; - int i; mutex_lock(&priv->reg_mutex); - for (i = 0; i < MT7530_NUM_PORTS; i++) { + dsa_switch_for_each_user_port(other_dp, ds) { + int other_port = other_dp->index; + + if (dp == other_dp) + continue; + /* Remove this port from the port matrix of the other ports * in the same bridge. If the port is disabled, port matrix * is kept and not being setup until the port becomes enabled. - * And the other port's port matrix cannot be broken when the - * other port is still a VLAN-aware port. */ - if (dsa_is_user_port(ds, i) && i != port && - !dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - mt7530_clear(priv, MT7530_PCR_P(i), - PCR_MATRIX(BIT(port))); - priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); - } + if (!dsa_port_offloads_bridge(other_dp, &bridge)) + continue; + + if (priv->ports[other_port].enable) + mt7530_clear(priv, MT7530_PCR_P(other_port), + PCR_MATRIX(BIT(port))); + priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port)); } /* Set the cpu port to be the only one in the port matrix of @@ -937,15 +1353,23 @@ mt7530_port_bridge_leave(struct dsa_switch *ds, int port, */ if (priv->ports[port].enable) mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, - PCR_MATRIX(BIT(MT7530_CPU_PORT))); - priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); + PCR_MATRIX(BIT(cpu_dp->index))); + priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index)); + + /* When a port is removed from the bridge, the port would be set up + * back to the default as is at initial boot which is a VLAN-unaware + * port. + */ + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, + MT7530_PORT_MATRIX_MODE); mutex_unlock(&priv->reg_mutex); } static int mt7530_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) + const unsigned char *addr, u16 vid, + struct dsa_db db) { struct mt7530_priv *priv = ds->priv; int ret; @@ -961,7 +1385,8 @@ mt7530_port_fdb_add(struct dsa_switch *ds, int port, static int mt7530_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) + const unsigned char *addr, u16 vid, + struct dsa_db db) { struct mt7530_priv *priv = ds->priv; int ret; @@ -1011,6 +1436,61 @@ err: } static int +mt7530_port_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct mt7530_priv *priv = ds->priv; + const u8 *addr = mdb->addr; + u16 vid = mdb->vid; + u8 port_mask = 0; + int ret; + + mutex_lock(&priv->reg_mutex); + + mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); + if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) + port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) + & PORT_MAP_MASK; + + port_mask |= BIT(port); + mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT); + ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); + + mutex_unlock(&priv->reg_mutex); + + return ret; +} + +static int +mt7530_port_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct mt7530_priv *priv = ds->priv; + const u8 *addr = mdb->addr; + u16 vid = mdb->vid; + u8 port_mask = 0; + int ret; + + mutex_lock(&priv->reg_mutex); + + mt7530_fdb_write(priv, vid, 0, addr, 0, STATIC_EMP); + if (!mt7530_fdb_cmd(priv, MT7530_FDB_READ, NULL)) + port_mask = (mt7530_read(priv, MT7530_ATRD) >> PORT_MAP) + & PORT_MAP_MASK; + + port_mask &= ~BIT(port); + mt7530_fdb_write(priv, vid, port_mask, addr, -1, + port_mask ? STATIC_ENT : STATIC_EMP); + ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL); + + mutex_unlock(&priv->reg_mutex); + + return ret; +} + +static int mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) { struct mt7530_dummy_poll p; @@ -1038,9 +1518,12 @@ mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) } static int -mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering) +mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct netlink_ext_ack *extack) { + struct dsa_port *dp = dsa_to_port(ds, port); + struct dsa_port *cpu_dp = dp->cpu_dp; + if (vlan_filtering) { /* The port is being kept as VLAN-unaware port when bridge is * set up with vlan_filtering not being set, Otherwise, the @@ -1048,7 +1531,7 @@ mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, * for becoming a VLAN-aware port. */ mt7530_port_set_vlan_aware(ds, port); - mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT); + mt7530_port_set_vlan_aware(ds, cpu_dp->index); } else { mt7530_port_set_vlan_unaware(ds, port); } @@ -1056,49 +1539,39 @@ mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, return 0; } -static int -mt7530_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - /* nothing needed */ - - return 0; -} - static void mt7530_hw_vlan_add(struct mt7530_priv *priv, struct mt7530_hw_vlan_entry *entry) { + struct dsa_port *dp = dsa_to_port(priv->ds, entry->port); u8 new_members; u32 val; - new_members = entry->old_members | BIT(entry->port) | - BIT(MT7530_CPU_PORT); + new_members = entry->old_members | BIT(entry->port); /* Validate the entry with independent learning, create egress tag per * VLAN and joining the port as one of the port members. */ - val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID; + val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | FID(FID_BRIDGED) | + VLAN_VALID; mt7530_write(priv, MT7530_VAWD1, val); /* Decide whether adding tag or not for those outgoing packets from the * port inside the VLAN. - */ - val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG : - MT7530_VLAN_EGRESS_TAG; - mt7530_rmw(priv, MT7530_VAWD2, - ETAG_CTRL_P_MASK(entry->port), - ETAG_CTRL_P(entry->port, val)); - - /* CPU port is always taken as a tagged port for serving more than one + * CPU port is always taken as a tagged port for serving more than one * VLANs across and also being applied with egress type stack mode for * that VLAN tags would be appended after hardware special tag used as * DSA tag. */ + if (dsa_port_is_cpu(dp)) + val = MT7530_VLAN_EGRESS_STACK; + else if (entry->untagged) + val = MT7530_VLAN_EGRESS_UNTAG; + else + val = MT7530_VLAN_EGRESS_TAG; mt7530_rmw(priv, MT7530_VAWD2, - ETAG_CTRL_P_MASK(MT7530_CPU_PORT), - ETAG_CTRL_P(MT7530_CPU_PORT, - MT7530_VLAN_EGRESS_STACK)); + ETAG_CTRL_P_MASK(entry->port), + ETAG_CTRL_P(entry->port, val)); } static void @@ -1117,11 +1590,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *priv, return; } - /* If certain member apart from CPU port is still alive in the VLAN, - * the entry would be kept valid. Otherwise, the entry is got to be - * disabled. - */ - if (new_members && new_members != BIT(MT7530_CPU_PORT)) { + if (new_members) { val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID; mt7530_write(priv, MT7530_VAWD1, val); @@ -1152,37 +1621,64 @@ mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid, mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid); } -static void +static int +mt7530_setup_vlan0(struct mt7530_priv *priv) +{ + u32 val; + + /* Validate the entry with independent learning, keep the original + * ingress tag attribute. + */ + val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) | + VLAN_VALID; + mt7530_write(priv, MT7530_VAWD1, val); + + return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0); +} + +static int mt7530_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) { bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; struct mt7530_hw_vlan_entry new_entry; struct mt7530_priv *priv = ds->priv; - u16 vid; - - /* The port is kept as VLAN-unaware if bridge with vlan_filtering not - * being set. - */ - if (!dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) - return; mutex_lock(&priv->reg_mutex); - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { - mt7530_hw_vlan_entry_init(&new_entry, port, untagged); - mt7530_hw_vlan_update(priv, vid, &new_entry, - mt7530_hw_vlan_add); - } + mt7530_hw_vlan_entry_init(&new_entry, port, untagged); + mt7530_hw_vlan_update(priv, vlan->vid, &new_entry, mt7530_hw_vlan_add); if (pvid) { + priv->ports[port].pvid = vlan->vid; + + /* Accept all frames if PVID is set */ + mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, + MT7530_VLAN_ACC_ALL); + + /* Only configure PVID if VLAN filtering is enabled */ + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) + mt7530_rmw(priv, MT7530_PPBV1_P(port), + G0_PORT_VID_MASK, + G0_PORT_VID(vlan->vid)); + } else if (vlan->vid && priv->ports[port].pvid == vlan->vid) { + /* This VLAN is overwritten without PVID, so unset it */ + priv->ports[port].pvid = G0_PORT_VID_DEF; + + /* Only accept tagged frames if the port is VLAN-aware */ + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) + mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, + MT7530_VLAN_ACC_TAGGED); + mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, - G0_PORT_VID(vlan->vid_end)); - priv->ports[port].pvid = vlan->vid_end; + G0_PORT_VID_DEF); } mutex_unlock(&priv->reg_mutex); + + return 0; } static int @@ -1191,61 +1687,433 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port, { struct mt7530_hw_vlan_entry target_entry; struct mt7530_priv *priv = ds->priv; - u16 vid, pvid; - - /* The port is kept as VLAN-unaware if bridge with vlan_filtering not - * being set. - */ - if (!dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) - return 0; mutex_lock(&priv->reg_mutex); - pvid = priv->ports[port].pvid; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { - mt7530_hw_vlan_entry_init(&target_entry, port, 0); - mt7530_hw_vlan_update(priv, vid, &target_entry, - mt7530_hw_vlan_del); + mt7530_hw_vlan_entry_init(&target_entry, port, 0); + mt7530_hw_vlan_update(priv, vlan->vid, &target_entry, + mt7530_hw_vlan_del); - /* PVID is being restored to the default whenever the PVID port - * is being removed from the VLAN. - */ - if (pvid == vid) - pvid = G0_PORT_VID_DEF; + /* PVID is being restored to the default whenever the PVID port + * is being removed from the VLAN. + */ + if (priv->ports[port].pvid == vlan->vid) { + priv->ports[port].pvid = G0_PORT_VID_DEF; + + /* Only accept tagged frames if the port is VLAN-aware */ + if (dsa_port_is_vlan_filtering(dsa_to_port(ds, port))) + mt7530_rmw(priv, MT7530_PVC_P(port), ACC_FRM_MASK, + MT7530_VLAN_ACC_TAGGED); + + mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, + G0_PORT_VID_DEF); } - mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid); - priv->ports[port].pvid = pvid; mutex_unlock(&priv->reg_mutex); return 0; } +static int mt753x_mirror_port_get(unsigned int id, u32 val) +{ + return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : + MIRROR_PORT(val); +} + +static int mt753x_mirror_port_set(unsigned int id, u32 val) +{ + return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : + MIRROR_PORT(val); +} + +static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + struct mt7530_priv *priv = ds->priv; + int monitor_port; + u32 val; + + /* Check for existent entry */ + if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port)) + return -EEXIST; + + val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); + + /* MT7530 only supports one monitor port */ + monitor_port = mt753x_mirror_port_get(priv->id, val); + if (val & MT753X_MIRROR_EN(priv->id) && + monitor_port != mirror->to_local_port) + return -EEXIST; + + val |= MT753X_MIRROR_EN(priv->id); + val &= ~MT753X_MIRROR_MASK(priv->id); + val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port); + mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); + + val = mt7530_read(priv, MT7530_PCR_P(port)); + if (ingress) { + val |= PORT_RX_MIR; + priv->mirror_rx |= BIT(port); + } else { + val |= PORT_TX_MIR; + priv->mirror_tx |= BIT(port); + } + mt7530_write(priv, MT7530_PCR_P(port), val); + + return 0; +} + +static void mt753x_port_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct mt7530_priv *priv = ds->priv; + u32 val; + + val = mt7530_read(priv, MT7530_PCR_P(port)); + if (mirror->ingress) { + val &= ~PORT_RX_MIR; + priv->mirror_rx &= ~BIT(port); + } else { + val &= ~PORT_TX_MIR; + priv->mirror_tx &= ~BIT(port); + } + mt7530_write(priv, MT7530_PCR_P(port), val); + + if (!priv->mirror_rx && !priv->mirror_tx) { + val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); + val &= ~MT753X_MIRROR_EN(priv->id); + mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); + } +} + static enum dsa_tag_protocol mtk_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mp) { - struct mt7530_priv *priv = ds->priv; + return DSA_TAG_PROTO_MTK; +} - if (port != MT7530_CPU_PORT) { - dev_warn(priv->dev, - "port not matched with tagging CPU port\n"); - return DSA_TAG_PROTO_NONE; - } else { - return DSA_TAG_PROTO_MTK; +#ifdef CONFIG_GPIOLIB +static inline u32 +mt7530_gpio_to_bit(unsigned int offset) +{ + /* Map GPIO offset to register bit + * [ 2: 0] port 0 LED 0..2 as GPIO 0..2 + * [ 6: 4] port 1 LED 0..2 as GPIO 3..5 + * [10: 8] port 2 LED 0..2 as GPIO 6..8 + * [14:12] port 3 LED 0..2 as GPIO 9..11 + * [18:16] port 4 LED 0..2 as GPIO 12..14 + */ + return BIT(offset + offset / 3); +} + +static int +mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit); +} + +static void +mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + if (value) + mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); + else + mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); +} + +static int +mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ? + GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; +} + +static int +mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + mt7530_clear(priv, MT7530_LED_GPIO_OE, bit); + mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit); + + return 0; +} + +static int +mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct mt7530_priv *priv = gpiochip_get_data(gc); + u32 bit = mt7530_gpio_to_bit(offset); + + mt7530_set(priv, MT7530_LED_GPIO_DIR, bit); + + if (value) + mt7530_set(priv, MT7530_LED_GPIO_DATA, bit); + else + mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit); + + mt7530_set(priv, MT7530_LED_GPIO_OE, bit); + + return 0; +} + +static int +mt7530_setup_gpio(struct mt7530_priv *priv) +{ + struct device *dev = priv->dev; + struct gpio_chip *gc; + + gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL); + if (!gc) + return -ENOMEM; + + mt7530_write(priv, MT7530_LED_GPIO_OE, 0); + mt7530_write(priv, MT7530_LED_GPIO_DIR, 0); + mt7530_write(priv, MT7530_LED_IO_MODE, 0); + + gc->label = "mt7530"; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->get_direction = mt7530_gpio_get_direction; + gc->direction_input = mt7530_gpio_direction_input; + gc->direction_output = mt7530_gpio_direction_output; + gc->get = mt7530_gpio_get; + gc->set = mt7530_gpio_set; + gc->base = -1; + gc->ngpio = 15; + gc->can_sleep = true; + + return devm_gpiochip_add_data(dev, gc, priv); +} +#endif /* CONFIG_GPIOLIB */ + +static irqreturn_t +mt7530_irq_thread_fn(int irq, void *dev_id) +{ + struct mt7530_priv *priv = dev_id; + bool handled = false; + u32 val; + int p; + + mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); + val = mt7530_mii_read(priv, MT7530_SYS_INT_STS); + mt7530_mii_write(priv, MT7530_SYS_INT_STS, val); + mutex_unlock(&priv->bus->mdio_lock); + + for (p = 0; p < MT7530_NUM_PHYS; p++) { + if (BIT(p) & val) { + unsigned int irq; + + irq = irq_find_mapping(priv->irq_domain, p); + handle_nested_irq(irq); + handled = true; + } } + + return IRQ_RETVAL(handled); +} + +static void +mt7530_irq_mask(struct irq_data *d) +{ + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + + priv->irq_enable &= ~BIT(d->hwirq); +} + +static void +mt7530_irq_unmask(struct irq_data *d) +{ + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + + priv->irq_enable |= BIT(d->hwirq); +} + +static void +mt7530_irq_bus_lock(struct irq_data *d) +{ + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + + mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED); +} + +static void +mt7530_irq_bus_sync_unlock(struct irq_data *d) +{ + struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); + + mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); + mutex_unlock(&priv->bus->mdio_lock); +} + +static struct irq_chip mt7530_irq_chip = { + .name = KBUILD_MODNAME, + .irq_mask = mt7530_irq_mask, + .irq_unmask = mt7530_irq_unmask, + .irq_bus_lock = mt7530_irq_bus_lock, + .irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock, +}; + +static int +mt7530_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, true); + irq_set_noprobe(irq); + + return 0; +} + +static const struct irq_domain_ops mt7530_irq_domain_ops = { + .map = mt7530_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static void +mt7530_setup_mdio_irq(struct mt7530_priv *priv) +{ + struct dsa_switch *ds = priv->ds; + int p; + + for (p = 0; p < MT7530_NUM_PHYS; p++) { + if (BIT(p) & ds->phys_mii_mask) { + unsigned int irq; + + irq = irq_create_mapping(priv->irq_domain, p); + ds->slave_mii_bus->irq[p] = irq; + } + } +} + +static int +mt7530_setup_irq(struct mt7530_priv *priv) +{ + struct device *dev = priv->dev; + struct device_node *np = dev->of_node; + int ret; + + if (!of_property_read_bool(np, "interrupt-controller")) { + dev_info(dev, "no interrupt support\n"); + return 0; + } + + priv->irq = of_irq_get(np, 0); + if (priv->irq <= 0) { + dev_err(dev, "failed to get parent IRQ: %d\n", priv->irq); + return priv->irq ? : -EINVAL; + } + + priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS, + &mt7530_irq_domain_ops, priv); + if (!priv->irq_domain) { + dev_err(dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + /* This register must be set for MT7530 to properly fire interrupts */ + if (priv->id != ID_MT7531) + mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL); + + ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn, + IRQF_ONESHOT, KBUILD_MODNAME, priv); + if (ret) { + irq_domain_remove(priv->irq_domain); + dev_err(dev, "failed to request IRQ: %d\n", ret); + return ret; + } + + return 0; +} + +static void +mt7530_free_mdio_irq(struct mt7530_priv *priv) +{ + int p; + + for (p = 0; p < MT7530_NUM_PHYS; p++) { + if (BIT(p) & priv->ds->phys_mii_mask) { + unsigned int irq; + + irq = irq_find_mapping(priv->irq_domain, p); + irq_dispose_mapping(irq); + } + } +} + +static void +mt7530_free_irq_common(struct mt7530_priv *priv) +{ + free_irq(priv->irq, priv); + irq_domain_remove(priv->irq_domain); +} + +static void +mt7530_free_irq(struct mt7530_priv *priv) +{ + mt7530_free_mdio_irq(priv); + mt7530_free_irq_common(priv); +} + +static int +mt7530_setup_mdio(struct mt7530_priv *priv) +{ + struct dsa_switch *ds = priv->ds; + struct device *dev = priv->dev; + struct mii_bus *bus; + static int idx; + int ret; + + bus = devm_mdiobus_alloc(dev); + if (!bus) + return -ENOMEM; + + ds->slave_mii_bus = bus; + bus->priv = priv; + bus->name = KBUILD_MODNAME "-mii"; + snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); + bus->read = mt753x_phy_read; + bus->write = mt753x_phy_write; + bus->parent = dev; + bus->phy_mask = ~ds->phys_mii_mask; + + if (priv->irq) + mt7530_setup_mdio_irq(priv); + + ret = devm_mdiobus_register(dev, bus); + if (ret) { + dev_err(dev, "failed to register MDIO bus: %d\n", ret); + if (priv->irq) + mt7530_free_mdio_irq(priv); + } + + return ret; } static int mt7530_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; + struct device_node *dn = NULL; struct device_node *phy_node; struct device_node *mac_np; struct mt7530_dummy_poll p; phy_interface_t interface; - struct device_node *dn; + struct dsa_port *cpu_dp; u32 id, val; int ret, i; @@ -1253,13 +2121,23 @@ mt7530_setup(struct dsa_switch *ds) * controller also is the container for two GMACs nodes representing * as two netdev instances. */ - dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + dn = cpu_dp->master->dev.of_node->parent; + /* It doesn't matter which CPU port is found first, + * their masters should share the same parent OF node + */ + break; + } - if (priv->id == ID_MT7530) { - priv->ethernet = syscon_node_to_regmap(dn); - if (IS_ERR(priv->ethernet)) - return PTR_ERR(priv->ethernet); + if (!dn) { + dev_err(ds->dev, "parent OF node of DSA master not found"); + return -EINVAL; + } + ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + + if (priv->id == ID_MT7530) { regulator_set_voltage(priv->core_pwr, 1000000, 1000000); ret = regulator_enable(priv->core_pwr); if (ret < 0) { @@ -1322,19 +2200,35 @@ mt7530_setup(struct dsa_switch *ds) /* Enable and reset MIB counters */ mt7530_mib_reset(ds); - mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK); - for (i = 0; i < MT7530_NUM_PORTS; i++) { /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); - if (dsa_is_cpu_port(ds, i)) - mt7530_cpu_port_enable(priv, i); - else + /* Disable learning by default on all ports */ + mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); + + if (dsa_is_cpu_port(ds, i)) { + ret = mt753x_cpu_port_enable(ds, i); + if (ret) + return ret; + } else { mt7530_port_disable(ds, i); + + /* Set default PVID to 0 on all user ports */ + mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, + G0_PORT_VID_DEF); + } + /* Enable consistent egress tag */ + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Setup VLAN ID 0 for VLAN-unaware bridges */ + ret = mt7530_setup_vlan0(priv); + if (ret) + return ret; + /* Setup port 5 */ priv->p5_intf_sel = P5_DISABLED; interface = PHY_INTERFACE_MODE_NA; @@ -1356,21 +2250,36 @@ mt7530_setup(struct dsa_switch *ds) continue; phy_node = of_parse_phandle(mac_np, "phy-handle", 0); + if (!phy_node) + continue; + if (phy_node->parent == priv->dev->of_node->parent) { ret = of_get_phy_mode(mac_np, &interface); - if (ret && ret != -ENODEV) + if (ret && ret != -ENODEV) { + of_node_put(mac_np); + of_node_put(phy_node); return ret; + } id = of_mdio_parse_addr(ds->dev, phy_node); if (id == 0) priv->p5_intf_sel = P5_INTF_SEL_PHY_P0; if (id == 4) priv->p5_intf_sel = P5_INTF_SEL_PHY_P4; } + of_node_put(mac_np); of_node_put(phy_node); break; } } +#ifdef CONFIG_GPIOLIB + if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) { + ret = mt7530_setup_gpio(priv); + if (ret) + return ret; + } +#endif /* CONFIG_GPIOLIB */ + mt7530_setup_port5(ds, interface); /* Flush the FDB table */ @@ -1381,185 +2290,665 @@ mt7530_setup(struct dsa_switch *ds) return 0; } -static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) +static int +mt7531_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; + struct mt7530_dummy_poll p; + struct dsa_port *cpu_dp; + u32 val, id; + int ret, i; + + /* Reset whole chip through gpio pin or memory-mapped registers for + * different type of hardware + */ + if (priv->mcm) { + reset_control_assert(priv->rstc); + usleep_range(1000, 1100); + reset_control_deassert(priv->rstc); + } else { + gpiod_set_value_cansleep(priv->reset, 0); + usleep_range(1000, 1100); + gpiod_set_value_cansleep(priv->reset, 1); + } + + /* Waiting for MT7530 got to stable */ + INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); + ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, + 20, 1000000); + if (ret < 0) { + dev_err(priv->dev, "reset timeout\n"); + return ret; + } + + id = mt7530_read(priv, MT7531_CREV); + id >>= CHIP_NAME_SHIFT; + + if (id != MT7531_ID) { + dev_err(priv->dev, "chip %x can't be supported\n", id); + return -ENODEV; + } + + /* all MACs must be forced link-down before sw reset */ + for (i = 0; i < MT7530_NUM_PORTS; i++) + mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); + /* Reset the switch through internal reset */ + mt7530_write(priv, MT7530_SYS_CTRL, + SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | + SYS_CTRL_REG_RST); + + mt7531_pll_setup(priv); + + if (mt7531_dual_sgmii_supported(priv)) { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; + + /* Let ds->slave_mii_bus be able to access external phy. */ + mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, + MT7531_EXT_P_MDC_11); + mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, + MT7531_EXT_P_MDIO_12); + } else { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; + } + dev_dbg(ds->dev, "P5 support %s interface\n", + p5_intf_modes(priv->p5_intf_sel)); + + mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, + MT7531_GPIO0_INTERRUPT); + + /* Let phylink decide the interface later. */ + priv->p5_interface = PHY_INTERFACE_MODE_NA; + priv->p6_interface = PHY_INTERFACE_MODE_NA; + + /* Enable PHY core PLL, since phy_device has not yet been created + * provided for phy_[read,write]_mmd_indirect is called, we provide + * our own mt7531_ind_mmd_phy_[read,write] to complete this + * function. + */ + val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, + MDIO_MMD_VEND2, CORE_PLL_GROUP4); + val |= MT7531_PHY_PLL_BYPASS_MODE; + val &= ~MT7531_PHY_PLL_OFF; + mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, + CORE_PLL_GROUP4, val); + + /* BPDU to CPU port */ + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, + BIT(cpu_dp->index)); + break; + } + mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, + MT753X_BPDU_CPU_ONLY); + + /* Enable and reset MIB counters */ + mt7530_mib_reset(ds); + + for (i = 0; i < MT7530_NUM_PORTS; i++) { + /* Disable forwarding by default on all ports */ + mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, + PCR_MATRIX_CLR); + + /* Disable learning by default on all ports */ + mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); + + mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); + + if (dsa_is_cpu_port(ds, i)) { + ret = mt753x_cpu_port_enable(ds, i); + if (ret) + return ret; + } else { + mt7530_port_disable(ds, i); + + /* Set default PVID to 0 on all user ports */ + mt7530_rmw(priv, MT7530_PPBV1_P(i), G0_PORT_VID_MASK, + G0_PORT_VID_DEF); + } + + /* Enable consistent egress tag */ + mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, + PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); + } + + /* Setup VLAN ID 0 for VLAN-unaware bridges */ + ret = mt7530_setup_vlan0(priv); + if (ret) + return ret; + + ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + + /* Flush the FDB table */ + ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); + if (ret < 0) + return ret; + + return 0; +} + +static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ switch (port) { - case 0: /* Internal phy */ - case 1: - case 2: - case 3: - case 4: - if (state->interface != PHY_INTERFACE_MODE_GMII) - return; + case 0 ... 4: /* Internal phy */ + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (priv->p5_interface == state->interface) - break; - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_GMII) - return; - mt7530_setup_port5(ds, state->interface); + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + phy_interface_set_rgmii(config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_MII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); break; + case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) - break; + __set_bit(PHY_INTERFACE_MODE_RGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_TRGMII, + config->supported_interfaces); + break; + } +} - if (state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_TRGMII) - return; +static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) +{ + return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); +} + +static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct mt7530_priv *priv = ds->priv; - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, state->interface); + switch (port) { + case 0 ... 4: /* Internal phy */ + __set_bit(PHY_INTERFACE_MODE_GMII, + config->supported_interfaces); + break; - if (priv->id == ID_MT7530) { - /* Setup RX circuit, relevant PAD and driving on the - * host which must be placed after the setup on the - * device side is all finished. - */ - mt7623_pad_clk_setup(ds); + case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ + if (mt7531_is_rgmii_port(priv, port)) { + phy_interface_set_rgmii(config->supported_interfaces); + break; } + fallthrough; - priv->p6_interface = state->interface; + case 6: /* 1st cpu port supports sgmii/8023z only */ + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + + config->mac_capabilities |= MAC_2500FD; break; - default: - dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); - return; } +} - if (phylink_autoneg_inband(mode)) { - dev_err(ds->dev, "%s: in-band negotiation unsupported\n", - __func__); - return; +static int +mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + + return priv->info->pad_setup(ds, state->interface); +} + +static int +mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + + /* Only need to setup port5. */ + if (port != 5) + return 0; + + mt7530_setup_port5(priv->ds, interface); + + return 0; +} + +static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, + phy_interface_t interface, + struct phy_device *phydev) +{ + u32 val; + + if (!mt7531_is_rgmii_port(priv, port)) { + dev_err(priv->dev, "RGMII mode is not available for port %d\n", + port); + return -EINVAL; } - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; - mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | - PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE | PMCR_FORCE_LNK; + val = mt7530_read(priv, MT7531_CLKGEN_CTRL); + val |= GP_CLK_EN; + val &= ~GP_MODE_MASK; + val |= GP_MODE(MT7531_GP_MODE_RGMII); + val &= ~CLK_SKEW_IN_MASK; + val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG); + val &= ~CLK_SKEW_OUT_MASK; + val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG); + val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY; + + /* Do not adjust rgmii delay when vendor phy driver presents. */ + if (!phydev || phy_driver_is_genphy(phydev)) { + val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY); + switch (interface) { + case PHY_INTERFACE_MODE_RGMII: + val |= TXCLK_NO_REVERSE; + val |= RXCLK_NO_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val |= TXCLK_NO_REVERSE; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val |= RXCLK_NO_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + break; + default: + return -EINVAL; + } + } + mt7530_write(priv, MT7531_CLKGEN_CTRL, val); - /* Are we connected to external phy */ - if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; + return 0; +} - switch (state->speed) { - case SPEED_1000: - mcr_new |= PMCR_FORCE_SPEED_1000; +static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, int speed, int duplex) +{ + struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; + int port = pcs_to_mt753x_pcs(pcs)->port; + unsigned int val; + + /* For adjusting speed and duplex of SGMII force mode. */ + if (interface != PHY_INTERFACE_MODE_SGMII || + phylink_autoneg_inband(mode)) + return; + + /* SGMII force mode setting */ + val = mt7530_read(priv, MT7531_SGMII_MODE(port)); + val &= ~MT7531_SGMII_IF_MODE_MASK; + + switch (speed) { + case SPEED_10: + val |= MT7531_SGMII_FORCE_SPEED_10; break; case SPEED_100: - mcr_new |= PMCR_FORCE_SPEED_100; + val |= MT7531_SGMII_FORCE_SPEED_100; + break; + case SPEED_1000: + val |= MT7531_SGMII_FORCE_SPEED_1000; break; - } - if (state->duplex == DUPLEX_FULL) { - mcr_new |= PMCR_FORCE_FDX; - if (state->pause & MLO_PAUSE_TX) - mcr_new |= PMCR_TX_FC_EN; - if (state->pause & MLO_PAUSE_RX) - mcr_new |= PMCR_RX_FC_EN; } - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + /* MT7531 SGMII 1G force mode can only work in full duplex mode, + * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. + * + * The speed check is unnecessary as the MAC capabilities apply + * this restriction. --rmk + */ + if ((speed == SPEED_10 || speed == SPEED_100) && + duplex != DUPLEX_FULL) + val |= MT7531_SGMII_FORCE_HALF_DUPLEX; + + mt7530_write(priv, MT7531_SGMII_MODE(port), val); } -static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, +static bool mt753x_is_mac_port(u32 port) +{ + return (port == 5 || port == 6); +} + +static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port, phy_interface_t interface) { + u32 val; + + if (!mt753x_is_mac_port(port)) + return -EINVAL; + + mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), + MT7531_SGMII_PHYA_PWD); + + val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port)); + val &= ~MT7531_RG_TPHY_SPEED_MASK; + /* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B + * encoding. + */ + val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ? + MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G; + mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val); + + mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); + + /* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex + * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. + */ + mt7530_rmw(priv, MT7531_SGMII_MODE(port), + MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS, + MT7531_SGMII_FORCE_SPEED_1000); + + mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); + + return 0; +} + +static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port, + phy_interface_t interface) +{ + if (!mt753x_is_mac_port(port)) + return -EINVAL; + + mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), + MT7531_SGMII_PHYA_PWD); + + mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), + MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G); + + mt7530_set(priv, MT7531_SGMII_MODE(port), + MT7531_SGMII_REMOTE_FAULT_DIS | + MT7531_SGMII_SPEED_DUPLEX_AN); + + mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port), + MT7531_SGMII_TX_CONFIG_MASK, 1); + + mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); + + mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART); + + mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); + + return 0; +} + +static void mt7531_pcs_an_restart(struct phylink_pcs *pcs) +{ + struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; + int port = pcs_to_mt753x_pcs(pcs)->port; + u32 val; + + /* Only restart AN when AN is enabled */ + val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + if (val & MT7531_SGMII_AN_ENABLE) { + val |= MT7531_SGMII_AN_RESTART; + mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val); + } +} + +static int +mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + phy_interface_t interface) +{ struct mt7530_priv *priv = ds->priv; + struct phy_device *phydev; + struct dsa_port *dp; + + if (!mt753x_is_mac_port(port)) { + dev_err(priv->dev, "port %d is not a MAC port\n", port); + return -EINVAL; + } - mt7530_port_set_status(priv, port, 0); + switch (interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + dp = dsa_to_port(ds, port); + phydev = dp->slave->phydev; + return mt7531_rgmii_setup(priv, port, interface, phydev); + case PHY_INTERFACE_MODE_SGMII: + return mt7531_sgmii_setup_mode_an(priv, port, interface); + case PHY_INTERFACE_MODE_NA: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + return mt7531_sgmii_setup_mode_force(priv, port, interface); + default: + return -EINVAL; + } + + return -EINVAL; } -static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev) +static int +mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - mt7530_port_set_status(priv, port, 1); + return priv->info->mac_port_config(ds, port, mode, state->interface); } -static void mt7530_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static struct phylink_pcs * +mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port, + phy_interface_t interface) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + struct mt7530_priv *priv = ds->priv; + + switch (interface) { + case PHY_INTERFACE_MODE_TRGMII: + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + return &priv->pcs[port].pcs; + + default: + return NULL; + } +} + +static void +mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 mcr_cur, mcr_new; switch (port) { - case 0: /* Internal phy */ - case 1: - case 2: - case 3: - case 4: - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_GMII) + case 0 ... 4: /* Internal phy */ + if (state->interface != PHY_INTERFACE_MODE_GMII) goto unsupported; break; case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ - if (state->interface != PHY_INTERFACE_MODE_NA && - !phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_GMII) + if (priv->p5_interface == state->interface) + break; + + if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; + + if (priv->p5_intf_sel != P5_DISABLED) + priv->p5_interface = state->interface; break; case 6: /* 1st cpu port */ - if (state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_TRGMII) + if (priv->p6_interface == state->interface) + break; + + mt753x_pad_setup(ds, state); + + if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; + + priv->p6_interface = state->interface; break; default: - dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); unsupported: - linkmode_zero(supported); + dev_err(ds->dev, "%s: unsupported %s port: %i\n", + __func__, phy_modes(state->interface), port); return; } - phylink_set_port_modes(mask); - phylink_set(mask, Autoneg); + mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); + mcr_new = mcr_cur; + mcr_new &= ~PMCR_LINK_SETTINGS_MASK; + mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | + PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); - if (state->interface == PHY_INTERFACE_MODE_TRGMII) { - phylink_set(mask, 1000baseT_Full); - } else { - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - - if (state->interface != PHY_INTERFACE_MODE_MII) { - phylink_set(mask, 1000baseT_Half); - phylink_set(mask, 1000baseT_Full); - if (port == 5) - phylink_set(mask, 1000baseX_Full); - } + /* Are we connected to external phy */ + if (port == 5 && dsa_is_user_port(ds, 5)) + mcr_new |= PMCR_EXT_PHY; + + if (mcr_new != mcr_cur) + mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); +} + +static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); +} + +static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex) +{ + if (pcs->ops->pcs_link_up) + pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex); +} + +static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct mt7530_priv *priv = ds->priv; + u32 mcr; + + mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; + + /* MT753x MAC works in 1G full duplex mode for all up-clocked + * variants. + */ + if (interface == PHY_INTERFACE_MODE_TRGMII || + (phy_interface_mode_is_8023z(interface))) { + speed = SPEED_1000; + duplex = DUPLEX_FULL; + } + + switch (speed) { + case SPEED_1000: + mcr |= PMCR_FORCE_SPEED_1000; + break; + case SPEED_100: + mcr |= PMCR_FORCE_SPEED_100; + break; + } + if (duplex == DUPLEX_FULL) { + mcr |= PMCR_FORCE_FDX; + if (tx_pause) + mcr |= PMCR_TX_FC_EN; + if (rx_pause) + mcr |= PMCR_RX_FC_EN; } - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); + if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { + switch (speed) { + case SPEED_1000: + mcr |= PMCR_FORCE_EEE1G; + break; + case SPEED_100: + mcr |= PMCR_FORCE_EEE100; + break; + } + } - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); + mt7530_set(priv, MT7530_PMCR_P(port), mcr); } static int -mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) +mt7531_cpu_port_config(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - u32 pmsr; + phy_interface_t interface; + int speed; + int ret; + + switch (port) { + case 5: + if (mt7531_is_rgmii_port(priv, port)) + interface = PHY_INTERFACE_MODE_RGMII; + else + interface = PHY_INTERFACE_MODE_2500BASEX; - if (port < 0 || port >= MT7530_NUM_PORTS) + priv->p5_interface = interface; + break; + case 6: + interface = PHY_INTERFACE_MODE_2500BASEX; + + priv->p6_interface = interface; + break; + default: return -EINVAL; + } + + if (interface == PHY_INTERFACE_MODE_2500BASEX) + speed = SPEED_2500; + else + speed = SPEED_1000; + + ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); + if (ret) + return ret; + mt7530_write(priv, MT7530_PMCR_P(port), + PMCR_CPU_PORT_SETTING(priv->id)); + mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED, + interface, speed, DUPLEX_FULL); + mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, + speed, DUPLEX_FULL, true, true); + + return 0; +} + +static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct mt7530_priv *priv = ds->priv; + + /* This switch only supports full-duplex at 1Gbps */ + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000FD; + + if ((priv->id == ID_MT7531) && mt753x_is_mac_port(port)) + config->mac_capabilities |= MAC_2500FD; + + /* This driver does not make use of the speed, duplex, pause or the + * advertisement in its mac_config, so it is safe to mark this driver + * as non-legacy. + */ + config->legacy_pre_march2020 = false; + + priv->info->mac_port_get_caps(ds, port, config); +} + +static int mt753x_pcs_validate(struct phylink_pcs *pcs, + unsigned long *supported, + const struct phylink_link_state *state) +{ + /* Autonegotiation is not supported in TRGMII nor 802.3z modes */ + if (state->interface == PHY_INTERFACE_MODE_TRGMII || + phy_interface_mode_is_8023z(state->interface)) + phylink_clear(supported, Autoneg); + + return 0; +} + +static void mt7530_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; + int port = pcs_to_mt753x_pcs(pcs)->port; + u32 pmsr; pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); @@ -1587,40 +2976,248 @@ mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, state->pause |= MLO_PAUSE_RX; if (pmsr & PMSR_TX_FC) state->pause |= MLO_PAUSE_TX; +} + +static int +mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port, + struct phylink_link_state *state) +{ + u32 status, val; + u16 config_reg; + + status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + state->link = !!(status & MT7531_SGMII_LINK_STATUS); + state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE); + if (state->interface == PHY_INTERFACE_MODE_SGMII && + (status & MT7531_SGMII_AN_ENABLE)) { + val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port)); + config_reg = val >> 16; + + switch (config_reg & LPA_SGMII_SPD_MASK) { + case LPA_SGMII_1000: + state->speed = SPEED_1000; + break; + case LPA_SGMII_100: + state->speed = SPEED_100; + break; + case LPA_SGMII_10: + state->speed = SPEED_10; + break; + default: + dev_err(priv->dev, "invalid sgmii PHY speed\n"); + state->link = false; + return -EINVAL; + } + + if (config_reg & LPA_SGMII_FULL_DUPLEX) + state->duplex = DUPLEX_FULL; + else + state->duplex = DUPLEX_HALF; + } + + return 0; +} + +static void +mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port, + struct phylink_link_state *state) +{ + unsigned int val; + + val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); + state->link = !!(val & MT7531_SGMII_LINK_STATUS); + if (!state->link) + return; + + state->an_complete = state->link; + + if (state->interface == PHY_INTERFACE_MODE_2500BASEX) + state->speed = SPEED_2500; + else + state->speed = SPEED_1000; + + state->duplex = DUPLEX_FULL; + state->pause = MLO_PAUSE_NONE; +} + +static void mt7531_pcs_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; + int port = pcs_to_mt753x_pcs(pcs)->port; + + if (state->interface == PHY_INTERFACE_MODE_SGMII) { + mt7531_sgmii_pcs_get_state_an(priv, port, state); + return; + } else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) || + (state->interface == PHY_INTERFACE_MODE_2500BASEX)) { + mt7531_sgmii_pcs_get_state_inband(priv, port, state); + return; + } + + state->link = false; +} - return 1; +static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + return 0; +} + +static void mt7530_pcs_an_restart(struct phylink_pcs *pcs) +{ +} + +static const struct phylink_pcs_ops mt7530_pcs_ops = { + .pcs_validate = mt753x_pcs_validate, + .pcs_get_state = mt7530_pcs_get_state, + .pcs_config = mt753x_pcs_config, + .pcs_an_restart = mt7530_pcs_an_restart, +}; + +static const struct phylink_pcs_ops mt7531_pcs_ops = { + .pcs_validate = mt753x_pcs_validate, + .pcs_get_state = mt7531_pcs_get_state, + .pcs_config = mt753x_pcs_config, + .pcs_an_restart = mt7531_pcs_an_restart, + .pcs_link_up = mt7531_pcs_link_up, +}; + +static int +mt753x_setup(struct dsa_switch *ds) +{ + struct mt7530_priv *priv = ds->priv; + int i, ret; + + /* Initialise the PCS devices */ + for (i = 0; i < priv->ds->num_ports; i++) { + priv->pcs[i].pcs.ops = priv->info->pcs_ops; + priv->pcs[i].priv = priv; + priv->pcs[i].port = i; + if (mt753x_is_mac_port(i)) + priv->pcs[i].pcs.poll = 1; + } + + ret = priv->info->sw_setup(ds); + if (ret) + return ret; + + ret = mt7530_setup_irq(priv); + if (ret) + return ret; + + ret = mt7530_setup_mdio(priv); + if (ret && priv->irq) + mt7530_free_irq_common(priv); + + return ret; +} + +static int mt753x_get_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct mt7530_priv *priv = ds->priv; + u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port)); + + e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN); + e->tx_lpi_timer = GET_LPI_THRESH(eeecr); + + return 0; +} + +static int mt753x_set_mac_eee(struct dsa_switch *ds, int port, + struct ethtool_eee *e) +{ + struct mt7530_priv *priv = ds->priv; + u32 set, mask = LPI_THRESH_MASK | LPI_MODE_EN; + + if (e->tx_lpi_timer > 0xFFF) + return -EINVAL; + + set = SET_LPI_THRESH(e->tx_lpi_timer); + if (!e->tx_lpi_enabled) + /* Force LPI Mode without a delay */ + set |= LPI_MODE_EN; + mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set); + + return 0; } static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, - .setup = mt7530_setup, + .setup = mt753x_setup, .get_strings = mt7530_get_strings, - .phy_read = mt7530_phy_read, - .phy_write = mt7530_phy_write, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, + .set_ageing_time = mt7530_set_ageing_time, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, + .port_change_mtu = mt7530_port_change_mtu, + .port_max_mtu = mt7530_port_max_mtu, .port_stp_state_set = mt7530_stp_state_set, + .port_pre_bridge_flags = mt7530_port_pre_bridge_flags, + .port_bridge_flags = mt7530_port_bridge_flags, .port_bridge_join = mt7530_port_bridge_join, .port_bridge_leave = mt7530_port_bridge_leave, .port_fdb_add = mt7530_port_fdb_add, .port_fdb_del = mt7530_port_fdb_del, .port_fdb_dump = mt7530_port_fdb_dump, + .port_mdb_add = mt7530_port_mdb_add, + .port_mdb_del = mt7530_port_mdb_del, .port_vlan_filtering = mt7530_port_vlan_filtering, - .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, - .phylink_validate = mt7530_phylink_validate, - .phylink_mac_link_state = mt7530_phylink_mac_link_state, - .phylink_mac_config = mt7530_phylink_mac_config, - .phylink_mac_link_down = mt7530_phylink_mac_link_down, - .phylink_mac_link_up = mt7530_phylink_mac_link_up, + .port_mirror_add = mt753x_port_mirror_add, + .port_mirror_del = mt753x_port_mirror_del, + .phylink_get_caps = mt753x_phylink_get_caps, + .phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs, + .phylink_mac_config = mt753x_phylink_mac_config, + .phylink_mac_link_down = mt753x_phylink_mac_link_down, + .phylink_mac_link_up = mt753x_phylink_mac_link_up, + .get_mac_eee = mt753x_get_mac_eee, + .set_mac_eee = mt753x_set_mac_eee, +}; + +static const struct mt753x_info mt753x_table[] = { + [ID_MT7621] = { + .id = ID_MT7621, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, + .mac_port_config = mt7530_mac_config, + }, + [ID_MT7530] = { + .id = ID_MT7530, + .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, + .mac_port_config = mt7530_mac_config, + }, + [ID_MT7531] = { + .id = ID_MT7531, + .pcs_ops = &mt7531_pcs_ops, + .sw_setup = mt7531_setup, + .phy_read = mt7531_ind_phy_read, + .phy_write = mt7531_ind_phy_write, + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, + .mac_port_get_caps = mt7531_mac_port_get_caps, + .mac_port_config = mt7531_mac_config, + }, }; static const struct of_device_id mt7530_of_match[] = { - { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, - { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, + { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, + { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, + { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, mt7530_of_match); @@ -1642,7 +3239,7 @@ mt7530_probe(struct mdio_device *mdiodev) return -ENOMEM; priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS; /* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence. @@ -1661,8 +3258,20 @@ mt7530_probe(struct mdio_device *mdiodev) /* Get the hardware identifier from the devicetree node. * We will need it for some of the clock and regulator setup. */ - priv->id = (unsigned int)(unsigned long) - of_device_get_match_data(&mdiodev->dev); + priv->info = of_device_get_match_data(&mdiodev->dev); + if (!priv->info) + return -EINVAL; + + /* Sanity check if these required device operations are filled + * properly. + */ + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || + !priv->info->mac_port_get_caps || + !priv->info->mac_port_config) + return -EINVAL; + + priv->id = priv->info->id; if (priv->id == ID_MT7530) { priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); @@ -1704,6 +3313,9 @@ mt7530_remove(struct mdio_device *mdiodev) struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); int ret = 0; + if (!priv) + return; + ret = regulator_disable(priv->core_pwr); if (ret < 0) dev_err(priv->dev, @@ -1714,13 +3326,29 @@ mt7530_remove(struct mdio_device *mdiodev) dev_err(priv->dev, "Failed to disable io pwr: %d\n", ret); + if (priv->irq) + mt7530_free_irq(priv); + dsa_unregister_switch(priv->ds); mutex_destroy(&priv->reg_mutex); } +static void mt7530_shutdown(struct mdio_device *mdiodev) +{ + struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); + + if (!priv) + return; + + dsa_switch_shutdown(priv->ds); + + dev_set_drvdata(&mdiodev->dev, NULL); +} + static struct mdio_driver mt7530_mdio_driver = { .probe = mt7530_probe, .remove = mt7530_remove, + .shutdown = mt7530_shutdown, .mdiodrv.driver = { .name = "mt7530", .of_match_table = mt7530_of_match, |