aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c29
-rw-r--r--drivers/net/dsa/qca8k.c10
-rw-r--r--drivers/net/dsa/sja1105/sja1105_dynamic_config.c14
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c143
-rw-r--r--drivers/net/dsa/sja1105/sja1105_ptp.c7
5 files changed, 86 insertions, 117 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 467e61ced82c..d3804ffd3d2a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -27,7 +27,6 @@
#include <linux/platform_data/mv88e6xxx.h>
#include <linux/netdevice.h>
#include <linux/gpio/consumer.h>
-#include <linux/phy.h>
#include <linux/phylink.h>
#include <net/dsa.h>
@@ -430,7 +429,7 @@ int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link,
return 0;
/* Port's MAC control must not be changed unless the link is down */
- err = chip->info->ops->port_set_link(chip, port, 0);
+ err = chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN);
if (err)
return err;
@@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
return port < chip->info->num_internal_phys;
}
-/* We expect the switch to perform auto negotiation if there is a real
- * phy. However, in the case of a fixed link phy, we force the port
- * settings from the fixed link settings.
- */
-static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
-{
- struct mv88e6xxx_chip *chip = ds->priv;
- int err;
-
- if (!phy_is_pseudo_fixed_link(phydev) &&
- mv88e6xxx_phy_is_internal(ds, port))
- return;
-
- mv88e6xxx_reg_lock(chip);
- err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
- phydev->duplex, phydev->pause,
- phydev->interface);
- mv88e6xxx_reg_unlock(chip);
-
- if (err && err != -EOPNOTSUPP)
- dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
-}
-
static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
unsigned long *mask,
struct phylink_link_state *state)
@@ -2747,6 +2722,7 @@ static int mv88e6xxx_mdios_register(struct mv88e6xxx_chip *chip,
err = mv88e6xxx_mdio_register(chip, child, true);
if (err) {
mv88e6xxx_mdios_unregister(chip);
+ of_node_put(child);
return err;
}
}
@@ -4720,7 +4696,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
.get_tag_protocol = mv88e6xxx_get_tag_protocol,
.setup = mv88e6xxx_setup,
- .adjust_link = mv88e6xxx_adjust_link,
.phylink_validate = mv88e6xxx_validate,
.phylink_mac_link_state = mv88e6xxx_link_state,
.phylink_mac_config = mv88e6xxx_mac_config,
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 232e8cc96f6d..16f15c93a102 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -2,7 +2,7 @@
/*
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2016 John Crispin <john@phrozen.org>
*/
@@ -583,8 +583,11 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
for_each_available_child_of_node(ports, port) {
err = of_property_read_u32(port, "reg", &reg);
- if (err)
+ if (err) {
+ of_node_put(port);
+ of_node_put(ports);
return err;
+ }
if (!dsa_is_user_port(priv->ds, reg))
continue;
@@ -595,6 +598,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
internal_mdio_mask |= BIT(reg);
}
+ of_node_put(ports);
if (!external_mdio_mask && !internal_mdio_mask) {
dev_err(priv->dev, "no PHYs are defined.\n");
return -EINVAL;
@@ -935,6 +939,8 @@ qca8k_port_enable(struct dsa_switch *ds, int port,
qca8k_port_set_status(priv, port, 1);
priv->port_sts[port].enabled = 1;
+ phy_support_asym_pause(phy);
+
return 0;
}
diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
index 6bfb1696a6f2..9988c9d18567 100644
--- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
+++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c
@@ -277,6 +277,18 @@ sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op);
}
+static size_t sja1105et_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr,
+ enum packing_op op)
+{
+ struct sja1105_l2_lookup_entry *entry = entry_ptr;
+ u8 *cmd = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY;
+ const int size = SJA1105_SIZE_DYN_CMD;
+
+ sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op);
+
+ return sja1105et_l2_lookup_entry_packing(buf, entry_ptr, op);
+}
+
static void
sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd,
enum packing_op op)
@@ -477,7 +489,7 @@ sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
/* SJA1105E/T: First generation */
struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = {
[BLK_IDX_L2_LOOKUP] = {
- .entry_packing = sja1105et_l2_lookup_entry_packing,
+ .entry_packing = sja1105et_dyn_l2_lookup_entry_packing,
.cmd_packing = sja1105et_l2_lookup_cmd_packing,
.access = (OP_READ | OP_WRITE | OP_DEL),
.max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 32bf3a7cc3b6..d073baffc20b 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -218,7 +218,7 @@ static int sja1105_init_l2_lookup_params(struct sja1105_private *priv)
/* This selects between Independent VLAN Learning (IVL) and
* Shared VLAN Learning (SVL)
*/
- .shared_learn = false,
+ .shared_learn = true,
/* Don't discard management traffic based on ENFPORT -
* we don't perform SMAC port enforcement anyway, so
* what we are setting here doesn't matter.
@@ -625,6 +625,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv,
if (of_property_read_u32(child, "reg", &index) < 0) {
dev_err(dev, "Port number not defined in device tree "
"(property \"reg\")\n");
+ of_node_put(child);
return -ENODEV;
}
@@ -634,6 +635,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv,
dev_err(dev, "Failed to read phy-mode or "
"phy-interface-type property for port %d\n",
index);
+ of_node_put(child);
return -ENODEV;
}
ports[index].phy_mode = phy_mode;
@@ -643,6 +645,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv,
if (!of_phy_is_fixed_link(child)) {
dev_err(dev, "phy-handle or fixed-link "
"properties missing!\n");
+ of_node_put(child);
return -ENODEV;
}
/* phy-handle is missing, but fixed-link isn't.
@@ -1089,8 +1092,13 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port,
l2_lookup.vlanid = vid;
l2_lookup.iotag = SJA1105_S_TAG;
l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
- l2_lookup.mask_vlanid = VLAN_VID_MASK;
- l2_lookup.mask_iotag = BIT(0);
+ if (dsa_port_is_vlan_filtering(&ds->ports[port])) {
+ l2_lookup.mask_vlanid = VLAN_VID_MASK;
+ l2_lookup.mask_iotag = BIT(0);
+ } else {
+ l2_lookup.mask_vlanid = 0;
+ l2_lookup.mask_iotag = 0;
+ }
l2_lookup.destports = BIT(port);
rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
@@ -1147,8 +1155,13 @@ int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port,
l2_lookup.vlanid = vid;
l2_lookup.iotag = SJA1105_S_TAG;
l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0);
- l2_lookup.mask_vlanid = VLAN_VID_MASK;
- l2_lookup.mask_iotag = BIT(0);
+ if (dsa_port_is_vlan_filtering(&ds->ports[port])) {
+ l2_lookup.mask_vlanid = VLAN_VID_MASK;
+ l2_lookup.mask_iotag = BIT(0);
+ } else {
+ l2_lookup.mask_vlanid = 0;
+ l2_lookup.mask_iotag = 0;
+ }
l2_lookup.destports = BIT(port);
rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP,
@@ -1178,60 +1191,31 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
- u16 rx_vid, tx_vid;
- int rc, i;
- if (dsa_port_is_vlan_filtering(&ds->ports[port]))
- return priv->info->fdb_add_cmd(ds, port, addr, vid);
-
- /* Since we make use of VLANs even when the bridge core doesn't tell us
- * to, translate these FDB entries into the correct dsa_8021q ones.
- * The basic idea (also repeats for removal below) is:
- * - Each of the other front-panel ports needs to be able to forward a
- * pvid-tagged (aka tagged with their rx_vid) frame that matches this
- * DMAC.
- * - The CPU port (aka the tx_vid of this port) needs to be able to
- * send a frame matching this DMAC to the specified port.
- * For a better picture see net/dsa/tag_8021q.c.
+ /* dsa_8021q is in effect when the bridge's vlan_filtering isn't,
+ * so the switch still does some VLAN processing internally.
+ * But Shared VLAN Learning (SVL) is also active, and it will take
+ * care of autonomous forwarding between the unique pvid's of each
+ * port. Here we just make sure that users can't add duplicate FDB
+ * entries when in this mode - the actual VID doesn't matter except
+ * for what gets printed in 'bridge fdb show'. In the case of zero,
+ * no VID gets printed at all.
*/
- for (i = 0; i < SJA1105_NUM_PORTS; i++) {
- if (i == port)
- continue;
- if (i == dsa_upstream_port(priv->ds, port))
- continue;
+ if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
+ vid = 0;
- rx_vid = dsa_8021q_rx_vid(ds, i);
- rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid);
- if (rc < 0)
- return rc;
- }
- tx_vid = dsa_8021q_tx_vid(ds, port);
- return priv->info->fdb_add_cmd(ds, port, addr, tx_vid);
+ return priv->info->fdb_add_cmd(ds, port, addr, vid);
}
static int sja1105_fdb_del(struct dsa_switch *ds, int port,
const unsigned char *addr, u16 vid)
{
struct sja1105_private *priv = ds->priv;
- u16 rx_vid, tx_vid;
- int rc, i;
-
- if (dsa_port_is_vlan_filtering(&ds->ports[port]))
- return priv->info->fdb_del_cmd(ds, port, addr, vid);
- for (i = 0; i < SJA1105_NUM_PORTS; i++) {
- if (i == port)
- continue;
- if (i == dsa_upstream_port(priv->ds, port))
- continue;
+ if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
+ vid = 0;
- rx_vid = dsa_8021q_rx_vid(ds, i);
- rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid);
- if (rc < 0)
- return rc;
- }
- tx_vid = dsa_8021q_tx_vid(ds, port);
- return priv->info->fdb_del_cmd(ds, port, addr, tx_vid);
+ return priv->info->fdb_del_cmd(ds, port, addr, vid);
}
static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
@@ -1270,39 +1254,9 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port,
continue;
u64_to_ether_addr(l2_lookup.macaddr, macaddr);
- /* On SJA1105 E/T, the switch doesn't implement the LOCKEDS
- * bit, so it doesn't tell us whether a FDB entry is static
- * or not.
- * But, of course, we can find out - we're the ones who added
- * it in the first place.
- */
- if (priv->info->device_id == SJA1105E_DEVICE_ID ||
- priv->info->device_id == SJA1105T_DEVICE_ID) {
- int match;
-
- match = sja1105_find_static_fdb_entry(priv, port,
- &l2_lookup);
- l2_lookup.lockeds = (match >= 0);
- }
-
- /* We need to hide the dsa_8021q VLANs from the user. This
- * basically means hiding the duplicates and only showing
- * the pvid that is supposed to be active in standalone and
- * non-vlan_filtering modes (aka 1).
- * - For statically added FDB entries (bridge fdb add), we
- * can convert the TX VID (coming from the CPU port) into the
- * pvid and ignore the RX VIDs of the other ports.
- * - For dynamically learned FDB entries, a single entry with
- * no duplicates is learned - that which has the real port's
- * pvid, aka RX VID.
- */
- if (!dsa_port_is_vlan_filtering(&ds->ports[port])) {
- if (l2_lookup.vlanid == tx_vid ||
- l2_lookup.vlanid == rx_vid)
- l2_lookup.vlanid = 1;
- else
- continue;
- }
+ /* We need to hide the dsa_8021q VLANs from the user. */
+ if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
+ l2_lookup.vlanid = 0;
cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data);
}
return 0;
@@ -1594,6 +1548,7 @@ static int sja1105_vlan_prepare(struct dsa_switch *ds, int port,
*/
static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
{
+ struct sja1105_l2_lookup_params_entry *l2_lookup_params;
struct sja1105_general_params_entry *general_params;
struct sja1105_private *priv = ds->priv;
struct sja1105_table *table;
@@ -1622,6 +1577,28 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
general_params->incl_srcpt1 = enabled;
general_params->incl_srcpt0 = enabled;
+ /* VLAN filtering => independent VLAN learning.
+ * No VLAN filtering => shared VLAN learning.
+ *
+ * In shared VLAN learning mode, untagged traffic still gets
+ * pvid-tagged, and the FDB table gets populated with entries
+ * containing the "real" (pvid or from VLAN tag) VLAN ID.
+ * However the switch performs a masked L2 lookup in the FDB,
+ * effectively only looking up a frame's DMAC (and not VID) for the
+ * forwarding decision.
+ *
+ * This is extremely convenient for us, because in modes with
+ * vlan_filtering=0, dsa_8021q actually installs unique pvid's into
+ * each front panel port. This is good for identification but breaks
+ * learning badly - the VID of the learnt FDB entry is unique, aka
+ * no frames coming from any other port are going to have it. So
+ * for forwarding purposes, this is as though learning was broken
+ * (all frames get flooded).
+ */
+ table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS];
+ l2_lookup_params = table->entries;
+ l2_lookup_params->shared_learn = !enabled;
+
rc = sja1105_static_config_reload(priv);
if (rc)
dev_err(ds->dev, "Failed to change VLAN Ethertype\n");
@@ -1751,6 +1728,8 @@ static void sja1105_teardown(struct dsa_switch *ds)
cancel_work_sync(&priv->tagger_data.rxtstamp_work);
skb_queue_purge(&priv->tagger_data.skb_rxtstamp_queue);
+ sja1105_ptp_clock_unregister(priv);
+ sja1105_static_config_free(&priv->static_config);
}
static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
@@ -2208,9 +2187,7 @@ static int sja1105_remove(struct spi_device *spi)
{
struct sja1105_private *priv = spi_get_drvdata(spi);
- sja1105_ptp_clock_unregister(priv);
dsa_unregister_switch(priv->ds);
- sja1105_static_config_free(&priv->static_config);
return 0;
}
diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c
index d19cfdf681af..d8e8dd59f3d1 100644
--- a/drivers/net/dsa/sja1105/sja1105_ptp.c
+++ b/drivers/net/dsa/sja1105/sja1105_ptp.c
@@ -369,16 +369,15 @@ int sja1105_ptp_clock_register(struct sja1105_private *priv)
.mult = SJA1105_CC_MULT,
};
mutex_init(&priv->ptp_lock);
- INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check);
-
- schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
-
priv->ptp_caps = sja1105_ptp_caps;
priv->clock = ptp_clock_register(&priv->ptp_caps, ds->dev);
if (IS_ERR_OR_NULL(priv->clock))
return PTR_ERR(priv->clock);
+ INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check);
+ schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL);
+
return sja1105_ptp_reset(priv);
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.