diff options
Diffstat (limited to 'drivers/net/ethernet/3com')
| -rw-r--r-- | drivers/net/ethernet/3com/3c501.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/3c509.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/3c515.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/3c574_cs.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/3c589_cs.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/3c59x.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/3com/typhoon.c | 19 |
8 files changed, 17 insertions, 32 deletions
diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c index 68da81d476f3..bf73e1a02293 100644 --- a/drivers/net/ethernet/3com/3c501.c +++ b/drivers/net/ethernet/3com/3c501.c @@ -702,7 +702,7 @@ static void el_receive(struct net_device *dev) */ outb(AX_SYS, AX_CMD); - skb = dev_alloc_skb(pkt_len+2); + skb = netdev_alloc_skb(dev, pkt_len + 2); /* * Start of frame diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index 92053e6fc980..41719da2e178 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1066,7 +1066,7 @@ el3_rx(struct net_device *dev) short pkt_len = rx_status & 0x7ff; struct sk_buff *skb; - skb = dev_alloc_skb(pkt_len+5); + skb = netdev_alloc_skb(dev, pkt_len + 5); if (el3_debug > 4) pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c index f67a5d3a200c..59e1e001bc3f 100644 --- a/drivers/net/ethernet/3com/3c515.c +++ b/drivers/net/ethernet/3com/3c515.c @@ -826,11 +826,10 @@ static int corkscrew_open(struct net_device *dev) vp->rx_ring[i].next = 0; vp->rx_ring[i].status = 0; /* Clear complete bit. */ vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000; - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = netdev_alloc_skb(dev, PKT_BUF_SZ); vp->rx_skbuff[i] = skb; if (skb == NULL) break; /* Bad news! */ - skb->dev = dev; /* Mark as being used by this device. */ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ vp->rx_ring[i].addr = isa_virt_to_bus(skb->data); } @@ -1295,7 +1294,7 @@ static int corkscrew_rx(struct net_device *dev) short pkt_len = rx_status & 0x1fff; struct sk_buff *skb; - skb = dev_alloc_skb(pkt_len + 5 + 2); + skb = netdev_alloc_skb(dev, pkt_len + 5 + 2); if (corkscrew_debug > 4) pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); @@ -1368,7 +1367,7 @@ static int boomerang_rx(struct net_device *dev) /* Check if the packet is long enough to just accept without copying to a properly sized skbuff. */ if (pkt_len < rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 4)) != NULL) { + (skb = netdev_alloc_skb(dev, pkt_len + 4)) != NULL) { skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ /* 'skb_put()' points to the start of sk_buff data area. */ memcpy(skb_put(skb, pkt_len), @@ -1403,10 +1402,9 @@ static int boomerang_rx(struct net_device *dev) struct sk_buff *skb; entry = vp->dirty_rx % RX_RING_SIZE; if (vp->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = netdev_alloc_skb(dev, PKT_BUF_SZ); if (skb == NULL) break; /* Bad news! */ - skb->dev = dev; /* Mark as being used by this device. */ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data); vp->rx_skbuff[entry] = skb; diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index 9c01bc9235b3..e61b2f82ba3a 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -1012,7 +1012,7 @@ static int el3_rx(struct net_device *dev, int worklimit) short pkt_len = rx_status & 0x7ff; struct sk_buff *skb; - skb = dev_alloc_skb(pkt_len+5); + skb = netdev_alloc_skb(dev, pkt_len + 5); pr_debug(" Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c index da410f036869..b23253b9f742 100644 --- a/drivers/net/ethernet/3com/3c589_cs.c +++ b/drivers/net/ethernet/3com/3c589_cs.c @@ -819,7 +819,7 @@ static int el3_rx(struct net_device *dev) short pkt_len = rx_status & 0x7ff; struct sk_buff *skb; - skb = dev_alloc_skb(pkt_len+5); + skb = netdev_alloc_skb(dev, pkt_len + 5); netdev_dbg(dev, " Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index f9b74c0a8492..e463d1036829 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -1121,10 +1121,9 @@ static int __devinit vortex_probe1(struct device *gendev, dev = alloc_etherdev(sizeof(*vp)); retval = -ENOMEM; - if (!dev) { - pr_err(PFX "unable to allocate etherdev, aborting\n"); + if (!dev) goto out; - } + SET_NETDEV_DEV(dev, gendev); vp = netdev_priv(dev); @@ -2500,7 +2499,7 @@ static int vortex_rx(struct net_device *dev) int pkt_len = rx_status & 0x1fff; struct sk_buff *skb; - skb = dev_alloc_skb(pkt_len + 5); + skb = netdev_alloc_skb(dev, pkt_len + 5); if (vortex_debug > 4) pr_debug("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); @@ -2579,7 +2578,8 @@ boomerang_rx(struct net_device *dev) /* Check if the packet is long enough to just accept without copying to a properly sized skbuff. */ - if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + if (pkt_len < rx_copybreak && + (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); /* 'skb_put()' points to the start of sk_buff data area. */ diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index a8bb30cf512d..bad4fa6815c5 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -97,7 +97,7 @@ config VORTEX available from <http://www.tldp.org/docs.html#howto>. More specific information is in <file:Documentation/networking/vortex.txt> and in the comments at - the beginning of <file:drivers/net/3c59x.c>. + the beginning of <file:drivers/net/ethernet/3com/3c59x.c>. To compile this support as a module, choose M here. diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c index 6d6bc754b1a8..1234a14b2b73 100644 --- a/drivers/net/ethernet/3com/typhoon.c +++ b/drivers/net/ethernet/3com/typhoon.c @@ -966,18 +966,6 @@ typhoon_get_stats(struct net_device *dev) return stats; } -static int -typhoon_set_mac_address(struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = (struct sockaddr *) addr; - - if(netif_running(dev)) - return -EBUSY; - - memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len); - return 0; -} - static void typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -1607,7 +1595,7 @@ typhoon_alloc_rx_skb(struct typhoon *tp, u32 idx) le32_to_cpu(indexes->rxBuffCleared)) return -ENOMEM; - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = netdev_alloc_skb(tp->dev, PKT_BUF_SZ); if(!skb) return -ENOMEM; @@ -1618,7 +1606,6 @@ typhoon_alloc_rx_skb(struct typhoon *tp, u32 idx) skb_reserve(skb, 2); #endif - skb->dev = tp->dev; dma_addr = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); @@ -1673,7 +1660,7 @@ typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile __le32 * read pkt_len = le16_to_cpu(rx->frameLen); if(pkt_len < rx_copybreak && - (new_skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + (new_skb = netdev_alloc_skb(tp->dev, pkt_len + 2)) != NULL) { skb_reserve(new_skb, 2); pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, PKT_BUF_SZ, @@ -2267,7 +2254,7 @@ static const struct net_device_ops typhoon_netdev_ops = { .ndo_tx_timeout = typhoon_tx_timeout, .ndo_get_stats = typhoon_get_stats, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = typhoon_set_mac_address, + .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, }; |