diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 240 |
1 files changed, 146 insertions, 94 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 0283f343b0d1..9d64b988ab34 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -27,6 +27,10 @@ #include "bnx2x.h" #include "bnx2x_cmn.h" +typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8); /********************************************************/ #define ETH_HLEN 14 /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ @@ -152,6 +156,7 @@ #define SFP_EEPROM_CON_TYPE_ADDR 0x2 #define SFP_EEPROM_CON_TYPE_VAL_LC 0x7 #define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 + #define SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22 #define SFP_EEPROM_COMP_CODE_ADDR 0x3 @@ -3127,11 +3132,6 @@ static int bnx2x_bsc_read(struct link_params *params, int rc = 0; struct bnx2x *bp = params->bp; - if ((sl_devid != 0xa0) && (sl_devid != 0xa2)) { - DP(NETIF_MSG_LINK, "invalid sl_devid 0x%x\n", sl_devid); - return -EINVAL; - } - if (xfer_cnt > 16) { DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", xfer_cnt); @@ -3426,13 +3426,19 @@ static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, switch (phy->req_flow_ctrl) { case BNX2X_FLOW_CTRL_AUTO: - if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) + switch (params->req_fc_auto_adv) { + case BNX2X_FLOW_CTRL_BOTH: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - else + break; + case BNX2X_FLOW_CTRL_RX: + case BNX2X_FLOW_CTRL_TX: *ieee_fc |= - MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + default: + break; + } break; - case BNX2X_FLOW_CTRL_TX: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; break; @@ -3629,6 +3635,16 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, * init configuration, and set/clear SGMII flag. Internal * phy init is done purely in phy_init stage. */ +#define WC_TX_DRIVER(post2, idriver, ipre) \ + ((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \ + (idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \ + (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)) + +#define WC_TX_FIR(post, main, pre) \ + ((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \ + (main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \ + (pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)) + static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) @@ -3728,7 +3744,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, if (((vars->line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || (vars->line_speed == SPEED_1000)) { - u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; + u16 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; an_adv |= (1<<5); /* Enable CL37 1G Parallel Detect */ @@ -3753,20 +3769,13 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Set Transmit PMD settings */ lane = bnx2x_get_warpcore_lane(phy, params); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + WC_TX_DRIVER(0x02, 0x06, 0x09)); /* Configure the next lane if dual mode */ if (phy->flags & FLAGS_WC_DUAL_MODE) bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1), - ((0x02 << - MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x06 << - MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x09 << - MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); + WC_TX_DRIVER(0x02, 0x06, 0x09)); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, 0x03f0); @@ -3909,6 +3918,8 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u16 misc1_val, tap_val, tx_driver_val, lane, val; + u32 cfg_tap_val, tx_drv_brdct, tx_equal; + /* Hold rxSeqStart */ bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000); @@ -3952,23 +3963,33 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy, if (is_xfi) { misc1_val |= 0x5; - tap_val = ((0x08 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x37 << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); - tx_driver_val = - ((0x00 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x03 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); - + tap_val = WC_TX_FIR(0x08, 0x37, 0x00); + tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03); } else { + cfg_tap_val = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + port_hw_config[params->port]. + sfi_tap_values)); + + tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK; + + tx_drv_brdct = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >> + PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT; + misc1_val |= 0x9; - tap_val = ((0x0f << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2b << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x02 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)); - tx_driver_val = - ((0x03 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)); + + /* TAP values are controlled by nvram, if value there isn't 0 */ + if (tx_equal) + tap_val = (u16)tx_equal; + else + tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02); + + if (tx_drv_brdct) + tx_driver_val = WC_TX_DRIVER(0x03, (u16)tx_drv_brdct, + 0x06); + else + tx_driver_val = WC_TX_DRIVER(0x03, 0x02, 0x06); } bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); @@ -4105,15 +4126,11 @@ static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp, /* Set Transmit PMD settings */ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_TX_FIR_TAP, - ((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | - (0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | - (0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET) | - MDIO_WC_REG_TX_FIR_TAP_ENABLE)); + (WC_TX_FIR(0x12, 0x2d, 0x00) | + MDIO_WC_REG_TX_FIR_TAP_ENABLE)); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, - ((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | - (0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))); + MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane, + WC_TX_DRIVER(0x02, 0x02, 0x02)); } static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy, @@ -4750,8 +4767,8 @@ void bnx2x_link_status_update(struct link_params *params, port_mb[port].link_status)); /* Force link UP in non LOOPBACK_EXT loopback mode(s) */ - if (bp->link_params.loopback_mode != LOOPBACK_NONE && - bp->link_params.loopback_mode != LOOPBACK_EXT) + if (params->loopback_mode != LOOPBACK_NONE && + params->loopback_mode != LOOPBACK_EXT) vars->link_status |= LINK_STATUS_LINK_UP; if (bnx2x_eee_has_cap(params)) @@ -7758,7 +7775,8 @@ static void bnx2x_sfp_set_transmitter(struct link_params *params, static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) { struct bnx2x *bp = params->bp; u16 val = 0; @@ -7771,7 +7789,7 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* Set the read command byte count */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - (byte_cnt | 0xa000)); + (byte_cnt | (dev_addr << 8))); /* Set the read command address */ bnx2x_cl45_write(bp, phy, @@ -7845,6 +7863,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params, } static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, u8 *o_buf, u8 is_init) { @@ -7869,7 +7888,7 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, 1); } - rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, + rc = bnx2x_bsc_read(params, phy, dev_addr, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -7885,7 +7904,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) { struct bnx2x *bp = params->bp; u16 val, i; @@ -7896,6 +7916,15 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } + /* Set 2-wire transfer rate of SFP+ module EEPROM + * to 100Khz since some DACs(direct attached cables) do + * not work at 400Khz. + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, + ((dev_addr << 8) | 1)); + /* Need to read from 1.8000 to clear it */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, @@ -7968,26 +7997,44 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } - int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) + struct link_params *params, u8 dev_addr, + u16 addr, u16 byte_cnt, u8 *o_buf) { - int rc = -EOPNOTSUPP; + int rc = 0; + struct bnx2x *bp = params->bp; + u8 xfer_size; + u8 *user_data = o_buf; + read_sfp_module_eeprom_func_p read_func; + + if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) { + DP(NETIF_MSG_LINK, "invalid dev_addr 0x%x\n", dev_addr); + return -EINVAL; + } + switch (phy->type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - rc = bnx2x_8726_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; + read_func = bnx2x_8726_read_sfp_module_eeprom; + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - rc = bnx2x_8727_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; + read_func = bnx2x_8727_read_sfp_module_eeprom; + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf, 0); - break; + read_func = bnx2x_warpcore_read_sfp_module_eeprom; + break; + default: + return -EOPNOTSUPP; + } + + while (!rc && (byte_cnt > 0)) { + xfer_size = (byte_cnt > SFP_EEPROM_PAGE_SIZE) ? + SFP_EEPROM_PAGE_SIZE : byte_cnt; + rc = read_func(phy, params, dev_addr, addr, xfer_size, + user_data, 0); + byte_cnt -= xfer_size; + user_data += xfer_size; + addr += xfer_size; } return rc; } @@ -8004,6 +8051,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_CON_TYPE_ADDR, 2, (u8 *)val) != 0) { @@ -8021,6 +8069,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_FC_TX_TECH_ADDR, 1, &copper_module_type) != 0) { @@ -8049,20 +8098,24 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, break; } case SFP_EEPROM_CON_TYPE_VAL_LC: + case SFP_EEPROM_CON_TYPE_VAL_RJ45: check_limiting_mode = 1; if ((val[1] & (SFP_EEPROM_COMP_CODE_SR_MASK | SFP_EEPROM_COMP_CODE_LR_MASK | SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) { - DP(NETIF_MSG_LINK, "1G Optic module detected\n"); + DP(NETIF_MSG_LINK, "1G SFP module detected\n"); gport = params->port; phy->media_type = ETH_PHY_SFP_1G_FIBER; - phy->req_line_speed = SPEED_1000; - if (!CHIP_IS_E1x(bp)) - gport = BP_PATH(bp) + (params->port << 1); - netdev_err(bp->dev, "Warning: Link speed was forced to 1000Mbps." - " Current SFP module in port %d is not" - " compliant with 10G Ethernet\n", - gport); + if (phy->req_line_speed != SPEED_1000) { + phy->req_line_speed = SPEED_1000; + if (!CHIP_IS_E1x(bp)) { + gport = BP_PATH(bp) + + (params->port << 1); + } + netdev_err(bp->dev, + "Warning: Link speed was forced to 1000Mbps. Current SFP module in port %d is not compliant with 10G Ethernet\n", + gport); + } } else { int idx, cfg_idx = 0; DP(NETIF_MSG_LINK, "10G Optic module detected\n"); @@ -8101,6 +8154,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, u8 options[SFP_EEPROM_OPTIONS_SIZE]; if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_OPTIONS_ADDR, SFP_EEPROM_OPTIONS_SIZE, options) != 0) { @@ -8167,6 +8221,7 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, /* Format the warning message */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_VENDOR_NAME_ADDR, SFP_EEPROM_VENDOR_NAME_SIZE, (u8 *)vendor_name)) @@ -8175,6 +8230,7 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_PART_NO_ADDR, SFP_EEPROM_PART_NO_SIZE, (u8 *)vendor_pn)) @@ -8205,12 +8261,13 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, for (timeout = 0; timeout < 60; timeout++) { if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) - rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, - params, 1, - 1, &val, 1); + rc = bnx2x_warpcore_read_sfp_module_eeprom( + phy, params, I2C_DEV_ADDR_A0, 1, 1, &val, + 1); else - rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, - &val); + rc = bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, + 1, 1, &val); if (rc == 0) { DP(NETIF_MSG_LINK, "SFP+ module initialization took %d ms\n", @@ -8219,7 +8276,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, } usleep_range(5000, 10000); } - rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val); + rc = bnx2x_read_sfp_module_eeprom(phy, params, I2C_DEV_ADDR_A0, + 1, 1, &val); return rc; } @@ -8376,15 +8434,6 @@ static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val); - - /* Set 2-wire transfer rate of SFP+ module EEPROM - * to 100Khz since some DACs(direct attached cables) do - * not work at 400Khz. - */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, - 0xa001); break; default: DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n", @@ -9528,8 +9577,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, } else { /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - for (i = 0; i < ARRAY_SIZE(reg_set); - i++) + for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -10281,7 +10329,8 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; /* Determine if EEE was negotiated */ - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) bnx2x_eee_an_resolve(phy, params, vars); } @@ -12242,7 +12291,7 @@ static void bnx2x_init_bmac_loopback(struct link_params *params, bnx2x_xgxs_deassert(params); - /* set bmac loopback */ + /* Set bmac loopback */ bnx2x_bmac_enable(params, vars, 1, 1); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); @@ -12261,7 +12310,7 @@ static void bnx2x_init_emac_loopback(struct link_params *params, vars->phy_flags = PHY_XGXS_FLAG; bnx2x_xgxs_deassert(params); - /* set bmac loopback */ + /* Set bmac loopback */ bnx2x_emac_enable(params, vars, 1); bnx2x_emac_program(params, vars); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); @@ -12521,6 +12570,7 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) params->req_line_speed[0], params->req_flow_ctrl[0]); DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n", params->req_line_speed[1], params->req_flow_ctrl[1]); + DP(NETIF_MSG_LINK, "req_adv_flow_ctrl 0x%x\n", params->req_fc_auto_adv); vars->link_status = 0; vars->phy_link_up = 0; vars->link_up = 0; @@ -13440,8 +13490,8 @@ static void bnx2x_check_kr2_wa(struct link_params *params, int sigdet; /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery - * since some switches tend to reinit the AN process and clear the - * advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * Since some switches tend to reinit the AN process and clear the + * the advertised BP/NP after ~2 seconds causing the KR2 to be disabled * and recovered many times */ if (vars->check_kr2_recovery_cnt > 0) { @@ -13469,8 +13519,10 @@ static void bnx2x_check_kr2_wa(struct link_params *params, /* CL73 has not begun yet */ if (base_page == 0) { - if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No BP\n"); + } return; } @@ -13486,7 +13538,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { if (!not_kr2_device) { DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, - next_page); + next_page); bnx2x_kr2_recovery(params, vars, phy); } return; |