diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 160 |
1 files changed, 68 insertions, 92 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 20dcc02431ca..9b6b3d7304b6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -205,6 +205,11 @@ typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, (_bank + (_addr & 0xf)), \ _val) +static int bnx2x_check_half_open_conn(struct link_params *params, + struct link_vars *vars, u8 notify); +static int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params); + static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits) { u32 val = REG_RD(bp, reg); @@ -1399,57 +1404,6 @@ static void bnx2x_update_pfc_xmac(struct link_params *params, udelay(30); } - -static void bnx2x_emac_get_pfc_stat(struct link_params *params, - u32 pfc_frames_sent[2], - u32 pfc_frames_received[2]) -{ - /* Read pfc statistic */ - struct bnx2x *bp = params->bp; - u32 emac_base = params->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val_xon = 0; - u32 val_xoff = 0; - - DP(NETIF_MSG_LINK, "pfc statistic read from EMAC\n"); - - /* PFC received frames */ - val_xoff = REG_RD(bp, emac_base + - EMAC_REG_RX_PFC_STATS_XOFF_RCVD); - val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT; - val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_RCVD); - val_xon &= EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT; - - pfc_frames_received[0] = val_xon + val_xoff; - - /* PFC received sent */ - val_xoff = REG_RD(bp, emac_base + - EMAC_REG_RX_PFC_STATS_XOFF_SENT); - val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT; - val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_SENT); - val_xon &= EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT; - - pfc_frames_sent[0] = val_xon + val_xoff; -} - -/* Read pfc statistic*/ -void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, - u32 pfc_frames_sent[2], - u32 pfc_frames_received[2]) -{ - /* Read pfc statistic */ - struct bnx2x *bp = params->bp; - - DP(NETIF_MSG_LINK, "pfc statistic\n"); - - if (!vars->link_up) - return; - - if (vars->mac_type == MAC_TYPE_EMAC) { - DP(NETIF_MSG_LINK, "About to read PFC stats from EMAC\n"); - bnx2x_emac_get_pfc_stat(params, pfc_frames_sent, - pfc_frames_received); - } -} /******************************************************************/ /* MAC/PBF section */ /******************************************************************/ @@ -3865,6 +3819,19 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_warpcore_enable_AN_KR2(phy, params, vars); } else { + /* Enable Auto-Detect to support 1G over CL37 as well */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); + + /* Force cl48 sync_status LOW to avoid getting stuck in CL73 + * parallel-detect loop when CL73 and CL37 are enabled. + */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800); + bnx2x_set_aer_mmd(params, phy); + bnx2x_disable_kr2(params, vars, phy); } @@ -8120,17 +8087,20 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, *edc_mode = EDC_MODE_ACTIVE_DAC; else check_limiting_mode = 1; - } else if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { + } else { + *edc_mode = EDC_MODE_PASSIVE_DAC; + /* Even in case PASSIVE_DAC indication is not set, + * treat it as a passive DAC cable, since some cables + * don't have this indication. + */ + if (copper_module_type & + SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, "Passive Copper cable detected\n"); - *edc_mode = - EDC_MODE_PASSIVE_DAC; - } else { - DP(NETIF_MSG_LINK, - "Unknown copper-cable-type 0x%x !!!\n", - copper_module_type); - return -EINVAL; + } else { + DP(NETIF_MSG_LINK, + "Unknown copper-cable-type\n"); + } } break; } @@ -8632,8 +8602,8 @@ static void bnx2x_set_limiting_mode(struct link_params *params, } } -int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, - struct link_params *params) +static int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params) { struct bnx2x *bp = params->bp; u16 edc_mode; @@ -10825,9 +10795,9 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, (1<<11)); if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->req_line_speed == SPEED_1000)) { + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { an_1000_val |= (1<<8); autoneg_val |= (1<<9 | 1<<12); if (phy->req_duplex == DUPLEX_FULL) @@ -10843,30 +10813,32 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, 0x09, &an_1000_val); - /* Set 100 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - - /* Set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) + /* Advertise 10/100 link speed */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + an_10_100_val |= (1<<7); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + an_10_100_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } } /* Only 10/100 are allowed to work in FORCE mode */ @@ -13342,6 +13314,10 @@ static u8 bnx2x_analyze_link_error(struct link_params *params, DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up, old_status, status); + /* Do not touch the link in case physical link down */ + if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) + return 1; + /* a. Update shmem->link_status accordingly * b. Update link_vars->link_up */ @@ -13391,9 +13367,9 @@ static u8 bnx2x_analyze_link_error(struct link_params *params, * a fault, for example, due to break in the TX side of fiber. * ******************************************************************************/ -int bnx2x_check_half_open_conn(struct link_params *params, - struct link_vars *vars, - u8 notify) +static int bnx2x_check_half_open_conn(struct link_params *params, + struct link_vars *vars, + u8 notify) { struct bnx2x *bp = params->bp; u32 lss_status = 0; @@ -13550,7 +13526,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, */ not_kr2_device = (((base_page & 0x8000) == 0) || (((base_page & 0x8000) && - ((next_page & 0xe0) == 0x2)))); + ((next_page & 0xe0) == 0x20)))); /* In case KR2 is already disabled, check if we need to re-enable it */ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { |