1 files changed, 8 insertions, 46 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index 7ff31d1026fb..4ecf40b02d7b 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -600,42 +600,6 @@ struct t3_vpd {
 #define VPD_BASE          0xc00
 
 /**
- *	t3_seeprom_read - read a VPD EEPROM location
- *	@adapter: adapter to read
- *	@addr: EEPROM address
- *	@data: where to store the read data
- *
- *	Read a 32-bit word from a location in VPD EEPROM using the card's PCI
- *	VPD ROM capability.  A zero is written to the flag bit when the
- *	address is written to the control register.  The hardware device will
- *	set the flag to 1 when 4 bytes have been read into the data register.
- */
-int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
-{
-	u16 val;
-	int attempts = EEPROM_MAX_POLL;
-	u32 v;
-	unsigned int base = adapter->params.pci.vpd_cap_addr;
-
-	if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
-		return -EINVAL;
-
-	pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr);
-	do {
-		udelay(10);
-		pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
-	} while (!(val & PCI_VPD_ADDR_F) && --attempts);
-
-	if (!(val & PCI_VPD_ADDR_F)) {
-		CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr);
-		return -EIO;
-	}
-	pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, &v);
-	*data = cpu_to_le32(v);
-	return 0;
-}
-
-/**
  *	t3_seeprom_write - write a VPD EEPROM location
  *	@adapter: adapter to write
  *	@addr: EEPROM address
@@ -708,24 +672,22 @@ static int vpdstrtou16(char *s, u8 len, unsigned int base, u16 *val)
  */
 static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
-	int i, addr, ret;
 	struct t3_vpd vpd;
+	u8 base_val = 0;
+	int addr, ret;
 
 	/*
 	 * Card information is normally at VPD_BASE but some early cards had
 	 * it at 0.
 	 */
-	ret = t3_seeprom_read(adapter, VPD_BASE, (__le32 *)&vpd);
-	if (ret)
+	ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val);
+	if (ret < 0)
 		return ret;
-	addr = vpd.id_tag == 0x82 ? VPD_BASE : 0;
+	addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : 0;
 
-	for (i = 0; i < sizeof(vpd); i += 4) {
-		ret = t3_seeprom_read(adapter, addr + i,
-				      (__le32 *)((u8 *)&vpd + i));
-		if (ret)
-			return ret;
-	}
+	ret = pci_read_vpd(adapter->pdev, addr, sizeof(vpd), &vpd);
+	if (ret < 0)
+		return ret;
 
 	ret = vpdstrtouint(vpd.cclk_data, vpd.cclk_len, 10, &p->cclk);
 	if (ret)