diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 217 |
1 files changed, 181 insertions, 36 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index be34eaac41bf..7b92f0f86205 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -233,13 +233,14 @@ static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) } /** - * t4_wr_mbox_meat - send a command to FW through the given mailbox + * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox * @adap: the adapter * @mbox: index of the mailbox to use * @cmd: the command to write * @size: command length in bytes * @rpl: where to optionally store the reply * @sleep_ok: if true we may sleep while awaiting command completion + * @timeout: time to wait for command to finish before timing out * * Sends the given command to FW through the selected mailbox and waits * for the FW to execute the command. If @rpl is not %NULL it is used to @@ -254,8 +255,8 @@ static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) * command or FW executes it but signals an error. In the latter case * the return value is the error code indicated by FW (negated). */ -int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, - void *rpl, bool sleep_ok) +int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd, + int size, void *rpl, bool sleep_ok, int timeout) { static const int delay[] = { 1, 1, 3, 5, 10, 10, 20, 50, 100, 200 @@ -294,7 +295,7 @@ int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, delay_idx = 0; ms = delay[0]; - for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { + for (i = 0; i < timeout; i += ms) { if (sleep_ok) { ms = delay[delay_idx]; /* last element may repeat */ if (delay_idx < ARRAY_SIZE(delay) - 1) @@ -332,6 +333,13 @@ int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, return -ETIMEDOUT; } +int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok, + FW_CMD_MAX_TIMEOUT); +} + /** * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window * @adap: the adapter @@ -2038,6 +2046,147 @@ out: } /** + * t4_phy_fw_ver - return current PHY firmware version + * @adap: the adapter + * @phy_fw_ver: return value buffer for PHY firmware version + * + * Returns the current version of external PHY firmware on the + * adapter. + */ +int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver) +{ + u32 param, val; + int ret; + + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | + FW_PARAMS_PARAM_Y_V(adap->params.portvec) | + FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION)); + ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 1, + ¶m, &val); + if (ret < 0) + return ret; + *phy_fw_ver = val; + return 0; +} + +/** + * t4_load_phy_fw - download port PHY firmware + * @adap: the adapter + * @win: the PCI-E Memory Window index to use for t4_memory_rw() + * @win_lock: the lock to use to guard the memory copy + * @phy_fw_version: function to check PHY firmware versions + * @phy_fw_data: the PHY firmware image to write + * @phy_fw_size: image size + * + * Transfer the specified PHY firmware to the adapter. If a non-NULL + * @phy_fw_version is supplied, then it will be used to determine if + * it's necessary to perform the transfer by comparing the version + * of any existing adapter PHY firmware with that of the passed in + * PHY firmware image. If @win_lock is non-NULL then it will be used + * around the call to t4_memory_rw() which transfers the PHY firmware + * to the adapter. + * + * A negative error number will be returned if an error occurs. If + * version number support is available and there's no need to upgrade + * the firmware, 0 will be returned. If firmware is successfully + * transferred to the adapter, 1 will be retured. + * + * NOTE: some adapters only have local RAM to store the PHY firmware. As + * a result, a RESET of the adapter would cause that RAM to lose its + * contents. Thus, loading PHY firmware on such adapters must happen + * after any FW_RESET_CMDs ... + */ +int t4_load_phy_fw(struct adapter *adap, + int win, spinlock_t *win_lock, + int (*phy_fw_version)(const u8 *, size_t), + const u8 *phy_fw_data, size_t phy_fw_size) +{ + unsigned long mtype = 0, maddr = 0; + u32 param, val; + int cur_phy_fw_ver = 0, new_phy_fw_vers = 0; + int ret; + + /* If we have version number support, then check to see if the adapter + * already has up-to-date PHY firmware loaded. + */ + if (phy_fw_version) { + new_phy_fw_vers = phy_fw_version(phy_fw_data, phy_fw_size); + ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver); + if (ret < 0) + return ret; + + if (cur_phy_fw_ver >= new_phy_fw_vers) { + CH_WARN(adap, "PHY Firmware already up-to-date, " + "version %#x\n", cur_phy_fw_ver); + return 0; + } + } + + /* Ask the firmware where it wants us to copy the PHY firmware image. + * The size of the file requires a special version of the READ coommand + * which will pass the file size via the values field in PARAMS_CMD and + * retrieve the return value from firmware and place it in the same + * buffer values + */ + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | + FW_PARAMS_PARAM_Y_V(adap->params.portvec) | + FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); + val = phy_fw_size; + ret = t4_query_params_rw(adap, adap->mbox, adap->fn, 0, 1, + ¶m, &val, 1); + if (ret < 0) + return ret; + mtype = val >> 8; + maddr = (val & 0xff) << 16; + + /* Copy the supplied PHY Firmware image to the adapter memory location + * allocated by the adapter firmware. + */ + if (win_lock) + spin_lock_bh(win_lock); + ret = t4_memory_rw(adap, win, mtype, maddr, + phy_fw_size, (__be32 *)phy_fw_data, + T4_MEMORY_WRITE); + if (win_lock) + spin_unlock_bh(win_lock); + if (ret) + return ret; + + /* Tell the firmware that the PHY firmware image has been written to + * RAM and it can now start copying it over to the PHYs. The chip + * firmware will RESET the affected PHYs as part of this operation + * leaving them running the new PHY firmware image. + */ + param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) | + FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) | + FW_PARAMS_PARAM_Y_V(adap->params.portvec) | + FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); + ret = t4_set_params_timeout(adap, adap->mbox, adap->fn, 0, 1, + ¶m, &val, 30000); + + /* If we have version number support, then check to see that the new + * firmware got loaded properly. + */ + if (phy_fw_version) { + ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver); + if (ret < 0) + return ret; + + if (cur_phy_fw_ver != new_phy_fw_vers) { + CH_WARN(adap, "PHY Firmware did not update: " + "version on adapter %#x, " + "version flashed %#x\n", + cur_phy_fw_ver, new_phy_fw_vers); + return -ENXIO; + } + } + + return 1; +} + +/** * t4_fwcache - firmware cache operation * @adap: the adapter * @op : the operation (flush or flush and invalidate) @@ -4362,7 +4511,7 @@ int t4_fw_initialize(struct adapter *adap, unsigned int mbox) } /** - * t4_query_params - query FW or device parameters + * t4_query_params_rw - query FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF @@ -4370,13 +4519,14 @@ int t4_fw_initialize(struct adapter *adap, unsigned int mbox) * @nparams: the number of parameters * @params: the parameter names * @val: the parameter values + * @rw: Write and read flag * * Reads the value of FW or device parameters. Up to 7 parameters can be * queried at once. */ -int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, - unsigned int vf, unsigned int nparams, const u32 *params, - u32 *val) +int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + u32 *val, int rw) { int i, ret; struct fw_params_cmd c; @@ -4392,8 +4542,12 @@ int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, FW_PARAMS_CMD_VFN_V(vf)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); - for (i = 0; i < nparams; i++, p += 2) - *p = cpu_to_be32(*params++); + for (i = 0; i < nparams; i++) { + *p++ = cpu_to_be32(*params++); + if (rw) + *p = cpu_to_be32(*(val + i)); + p++; + } ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); if (ret == 0) @@ -4402,8 +4556,15 @@ int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, return ret; } +int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + u32 *val) +{ + return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0); +} + /** - * t4_set_params_nosleep - sets FW or device parameters + * t4_set_params_timeout - sets FW or device parameters * @adap: the adapter * @mbox: mailbox to use for the FW command * @pf: the PF @@ -4411,15 +4572,15 @@ int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, * @nparams: the number of parameters * @params: the parameter names * @val: the parameter values + * @timeout: the timeout time * - * Does not ever sleep * Sets the value of FW or device parameters. Up to 7 parameters can be * specified at once. */ -int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox, +int t4_set_params_timeout(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, - const u32 *val) + const u32 *val, int timeout) { struct fw_params_cmd c; __be32 *p = &c.param[0].mnem; @@ -4429,9 +4590,9 @@ int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox, memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | - FW_CMD_REQUEST_F | FW_CMD_WRITE_F | - FW_PARAMS_CMD_PFN_V(pf) | - FW_PARAMS_CMD_VFN_V(vf)); + FW_CMD_REQUEST_F | FW_CMD_WRITE_F | + FW_PARAMS_CMD_PFN_V(pf) | + FW_PARAMS_CMD_VFN_V(vf)); c.retval_len16 = cpu_to_be32(FW_LEN16(c)); while (nparams--) { @@ -4439,7 +4600,7 @@ int t4_set_params_nosleep(struct adapter *adap, unsigned int mbox, *p++ = cpu_to_be32(*val++); } - return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); + return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout); } /** @@ -4459,24 +4620,8 @@ int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, unsigned int vf, unsigned int nparams, const u32 *params, const u32 *val) { - struct fw_params_cmd c; - __be32 *p = &c.param[0].mnem; - - if (nparams > 7) - return -EINVAL; - - memset(&c, 0, sizeof(c)); - c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) | - FW_CMD_REQUEST_F | FW_CMD_WRITE_F | - FW_PARAMS_CMD_PFN_V(pf) | - FW_PARAMS_CMD_VFN_V(vf)); - c.retval_len16 = cpu_to_be32(FW_LEN16(c)); - while (nparams--) { - *p++ = cpu_to_be32(*params++); - *p++ = cpu_to_be32(*val++); - } - - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val, + FW_CMD_MAX_TIMEOUT); } /** |