diff options
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb4/t4_hw.c')
| -rw-r--r-- | drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 59 |
1 files changed, 56 insertions, 3 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 1abdfa123c6c..5ed8db977432 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -867,7 +867,7 @@ static int flash_wait_op(struct adapter *adapter, int attempts, int delay) * Read the specified number of 32-bit words from the serial flash. * If @byte_oriented is set the read data is stored as a byte array * (i.e., big-endian), otherwise as 32-bit words in the platform's - * natural endianess. + * natural endianness. */ int t4_read_flash(struct adapter *adapter, unsigned int addr, unsigned int nwords, u32 *data, int byte_oriented) @@ -3558,7 +3558,7 @@ int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, * For the single-MTU buffers in unpacked mode we need to include * space for the SGE Control Packet Shift, 14 byte Ethernet header, * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet - * Padding boundry. All of these are accommodated in the Factory + * Padding boundary. All of these are accommodated in the Factory * Default Firmware Configuration File but we need to adjust it for * this host's cache line size. */ @@ -4459,6 +4459,59 @@ int cxgb4_t4_bar2_sge_qregs(struct adapter *adapter, } /** + * t4_init_devlog_params - initialize adapter->params.devlog + * @adap: the adapter + * + * Initialize various fields of the adapter's Firmware Device Log + * Parameters structure. + */ +int t4_init_devlog_params(struct adapter *adap) +{ + struct devlog_params *dparams = &adap->params.devlog; + u32 pf_dparams; + unsigned int devlog_meminfo; + struct fw_devlog_cmd devlog_cmd; + int ret; + + /* If we're dealing with newer firmware, the Device Log Paramerters + * are stored in a designated register which allows us to access the + * Device Log even if we can't talk to the firmware. + */ + pf_dparams = + t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG)); + if (pf_dparams) { + unsigned int nentries, nentries128; + + dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams); + dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4; + + nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams); + nentries = (nentries128 + 1) * 128; + dparams->size = nentries * sizeof(struct fw_devlog_e); + + return 0; + } + + /* Otherwise, ask the firmware for it's Device Log Parameters. + */ + memset(&devlog_cmd, 0, sizeof(devlog_cmd)); + devlog_cmd.op_to_write = htonl(FW_CMD_OP_V(FW_DEVLOG_CMD) | + FW_CMD_REQUEST_F | FW_CMD_READ_F); + devlog_cmd.retval_len16 = htonl(FW_LEN16(devlog_cmd)); + ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd), + &devlog_cmd); + if (ret) + return ret; + + devlog_meminfo = ntohl(devlog_cmd.memtype_devlog_memaddr16_devlog); + dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo); + dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4; + dparams->size = ntohl(devlog_cmd.memsize_devlog); + + return 0; +} + +/** * t4_init_sge_params - initialize adap->params.sge * @adapter: the adapter * @@ -4529,7 +4582,7 @@ int t4_init_tp_params(struct adapter *adap) PROTOCOL_F); /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID - * represents the presense of an Outer VLAN instead of a VNIC ID. + * represents the presence of an Outer VLAN instead of a VNIC ID. */ if ((adap->params.tp.ingress_config & VNIC_F) == 0) adap->params.tp.vnic_shift = -1; |