diff options
Diffstat (limited to 'drivers/net/ethernet/faraday/ftgmac100.c')
-rw-r--r-- | drivers/net/ethernet/faraday/ftgmac100.c | 317 |
1 files changed, 190 insertions, 127 deletions
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 97c5d70de76e..a03879a27b04 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -989,117 +989,6 @@ static int ftgmac100_alloc_rx_buffers(struct ftgmac100 *priv) return 0; } -static void ftgmac100_adjust_link(struct net_device *netdev) -{ - struct ftgmac100 *priv = netdev_priv(netdev); - struct phy_device *phydev = netdev->phydev; - bool tx_pause, rx_pause; - int new_speed; - - /* We store "no link" as speed 0 */ - if (!phydev->link) - new_speed = 0; - else - new_speed = phydev->speed; - - /* Grab pause settings from PHY if configured to do so */ - if (priv->aneg_pause) { - rx_pause = tx_pause = phydev->pause; - if (phydev->asym_pause) - tx_pause = !rx_pause; - } else { - rx_pause = priv->rx_pause; - tx_pause = priv->tx_pause; - } - - /* Link hasn't changed, do nothing */ - if (phydev->speed == priv->cur_speed && - phydev->duplex == priv->cur_duplex && - rx_pause == priv->rx_pause && - tx_pause == priv->tx_pause) - return; - - /* Print status if we have a link or we had one and just lost it, - * don't print otherwise. - */ - if (new_speed || priv->cur_speed) - phy_print_status(phydev); - - priv->cur_speed = new_speed; - priv->cur_duplex = phydev->duplex; - priv->rx_pause = rx_pause; - priv->tx_pause = tx_pause; - - /* Link is down, do nothing else */ - if (!new_speed) - return; - - /* Disable all interrupts */ - iowrite32(0, priv->base + FTGMAC100_OFFSET_IER); - - /* Reset the adapter asynchronously */ - schedule_work(&priv->reset_task); -} - -static int ftgmac100_mii_probe(struct net_device *netdev) -{ - struct ftgmac100 *priv = netdev_priv(netdev); - struct platform_device *pdev = to_platform_device(priv->dev); - struct device_node *np = pdev->dev.of_node; - struct phy_device *phydev; - phy_interface_t phy_intf; - int err; - - /* Default to RGMII. It's a gigabit part after all */ - err = of_get_phy_mode(np, &phy_intf); - if (err) - phy_intf = PHY_INTERFACE_MODE_RGMII; - - /* Aspeed only supports these. I don't know about other IP - * block vendors so I'm going to just let them through for - * now. Note that this is only a warning if for some obscure - * reason the DT really means to lie about it or it's a newer - * part we don't know about. - * - * On the Aspeed SoC there are additionally straps and SCU - * control bits that could tell us what the interface is - * (or allow us to configure it while the IP block is held - * in reset). For now I chose to keep this driver away from - * those SoC specific bits and assume the device-tree is - * right and the SCU has been configured properly by pinmux - * or the firmware. - */ - if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) { - netdev_warn(netdev, - "Unsupported PHY mode %s !\n", - phy_modes(phy_intf)); - } - - phydev = phy_find_first(priv->mii_bus); - if (!phydev) { - netdev_info(netdev, "%s: no PHY found\n", netdev->name); - return -ENODEV; - } - - phydev = phy_connect(netdev, phydev_name(phydev), - &ftgmac100_adjust_link, phy_intf); - - if (IS_ERR(phydev)) { - netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); - return PTR_ERR(phydev); - } - - /* Indicate that we support PAUSE frames (see comment in - * Documentation/networking/phy.rst) - */ - phy_support_asym_pause(phydev); - - /* Display what we found */ - phy_attached_info(phydev); - - return 0; -} - static int ftgmac100_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) { struct net_device *netdev = bus->priv; @@ -1174,12 +1063,15 @@ static int ftgmac100_mdiobus_write(struct mii_bus *bus, int phy_addr, static void ftgmac100_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) { - strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); - strlcpy(info->bus_info, dev_name(&netdev->dev), sizeof(info->bus_info)); + strscpy(info->driver, DRV_NAME, sizeof(info->driver)); + strscpy(info->bus_info, dev_name(&netdev->dev), sizeof(info->bus_info)); } -static void ftgmac100_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ering) +static void +ftgmac100_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ering, + struct kernel_ethtool_ringparam *kernel_ering, + struct netlink_ext_ack *extack) { struct ftgmac100 *priv = netdev_priv(netdev); @@ -1190,8 +1082,11 @@ static void ftgmac100_get_ringparam(struct net_device *netdev, ering->tx_pending = priv->tx_q_entries; } -static int ftgmac100_set_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ering) +static int +ftgmac100_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ering, + struct kernel_ethtool_ringparam *kernel_ering, + struct netlink_ext_ack *extack) { struct ftgmac100 *priv = netdev_priv(netdev); @@ -1404,10 +1299,8 @@ static int ftgmac100_init_all(struct ftgmac100 *priv, bool ignore_alloc_err) return err; } -static void ftgmac100_reset_task(struct work_struct *work) +static void ftgmac100_reset(struct ftgmac100 *priv) { - struct ftgmac100 *priv = container_of(work, struct ftgmac100, - reset_task); struct net_device *netdev = priv->netdev; int err; @@ -1453,6 +1346,134 @@ static void ftgmac100_reset_task(struct work_struct *work) rtnl_unlock(); } +static void ftgmac100_reset_task(struct work_struct *work) +{ + struct ftgmac100 *priv = container_of(work, struct ftgmac100, + reset_task); + + ftgmac100_reset(priv); +} + +static void ftgmac100_adjust_link(struct net_device *netdev) +{ + struct ftgmac100 *priv = netdev_priv(netdev); + struct phy_device *phydev = netdev->phydev; + bool tx_pause, rx_pause; + int new_speed; + + /* We store "no link" as speed 0 */ + if (!phydev->link) + new_speed = 0; + else + new_speed = phydev->speed; + + /* Grab pause settings from PHY if configured to do so */ + if (priv->aneg_pause) { + rx_pause = tx_pause = phydev->pause; + if (phydev->asym_pause) + tx_pause = !rx_pause; + } else { + rx_pause = priv->rx_pause; + tx_pause = priv->tx_pause; + } + + /* Link hasn't changed, do nothing */ + if (phydev->speed == priv->cur_speed && + phydev->duplex == priv->cur_duplex && + rx_pause == priv->rx_pause && + tx_pause == priv->tx_pause) + return; + + /* Print status if we have a link or we had one and just lost it, + * don't print otherwise. + */ + if (new_speed || priv->cur_speed) + phy_print_status(phydev); + + priv->cur_speed = new_speed; + priv->cur_duplex = phydev->duplex; + priv->rx_pause = rx_pause; + priv->tx_pause = tx_pause; + + /* Link is down, do nothing else */ + if (!new_speed) + return; + + /* Disable all interrupts */ + iowrite32(0, priv->base + FTGMAC100_OFFSET_IER); + + /* Release phy lock to allow ftgmac100_reset to aquire it, keeping lock + * order consistent to prevent dead lock. + */ + if (netdev->phydev) + mutex_unlock(&netdev->phydev->lock); + + ftgmac100_reset(priv); + + if (netdev->phydev) + mutex_lock(&netdev->phydev->lock); + +} + +static int ftgmac100_mii_probe(struct net_device *netdev) +{ + struct ftgmac100 *priv = netdev_priv(netdev); + struct platform_device *pdev = to_platform_device(priv->dev); + struct device_node *np = pdev->dev.of_node; + struct phy_device *phydev; + phy_interface_t phy_intf; + int err; + + /* Default to RGMII. It's a gigabit part after all */ + err = of_get_phy_mode(np, &phy_intf); + if (err) + phy_intf = PHY_INTERFACE_MODE_RGMII; + + /* Aspeed only supports these. I don't know about other IP + * block vendors so I'm going to just let them through for + * now. Note that this is only a warning if for some obscure + * reason the DT really means to lie about it or it's a newer + * part we don't know about. + * + * On the Aspeed SoC there are additionally straps and SCU + * control bits that could tell us what the interface is + * (or allow us to configure it while the IP block is held + * in reset). For now I chose to keep this driver away from + * those SoC specific bits and assume the device-tree is + * right and the SCU has been configured properly by pinmux + * or the firmware. + */ + if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) { + netdev_warn(netdev, + "Unsupported PHY mode %s !\n", + phy_modes(phy_intf)); + } + + phydev = phy_find_first(priv->mii_bus); + if (!phydev) { + netdev_info(netdev, "%s: no PHY found\n", netdev->name); + return -ENODEV; + } + + phydev = phy_connect(netdev, phydev_name(phydev), + &ftgmac100_adjust_link, phy_intf); + + if (IS_ERR(phydev)) { + netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name); + return PTR_ERR(phydev); + } + + /* Indicate that we support PAUSE frames (see comment in + * Documentation/networking/phy.rst) + */ + phy_support_asym_pause(phydev); + + /* Display what we found */ + phy_attached_info(phydev); + + return 0; +} + static int ftgmac100_open(struct net_device *netdev) { struct ftgmac100 *priv = netdev_priv(netdev); @@ -1485,7 +1506,7 @@ static int ftgmac100_open(struct net_device *netdev) goto err_hw; /* Initialize NAPI */ - netif_napi_add(netdev, &priv->napi, ftgmac100_poll, 64); + netif_napi_add(netdev, &priv->napi, ftgmac100_poll); /* Grab our interrupt */ err = request_irq(netdev->irq, ftgmac100_interrupt, 0, netdev->name, netdev); @@ -1680,10 +1701,14 @@ err_register_mdiobus: static void ftgmac100_phy_disconnect(struct net_device *netdev) { + struct ftgmac100 *priv = netdev_priv(netdev); + if (!netdev->phydev) return; phy_disconnect(netdev->phydev); + if (of_phy_is_fixed_link(priv->dev->of_node)) + of_phy_deregister_fixed_link(priv->dev->of_node); } static void ftgmac100_destroy_mdio(struct net_device *netdev) @@ -1743,6 +1768,19 @@ cleanup_clk: return rc; } +static bool ftgmac100_has_child_node(struct device_node *np, const char *name) +{ + struct device_node *child_np = of_get_child_by_name(np, name); + bool ret = false; + + if (child_np) { + ret = true; + of_node_put(child_np); + } + + return ret; +} + static int ftgmac100_probe(struct platform_device *pdev) { struct resource *res; @@ -1814,11 +1852,6 @@ static int ftgmac100_probe(struct platform_device *pdev) priv->rxdes0_edorr_mask = BIT(30); priv->txdes0_edotr_mask = BIT(30); priv->is_aspeed = true; - /* Disable ast2600 problematic HW arbitration */ - if (of_device_is_compatible(np, "aspeed,ast2600-mac")) { - iowrite32(FTGMAC100_TM_DEFAULT, - priv->base + FTGMAC100_OFFSET_TM); - } } else { priv->rxdes0_edorr_mask = BIT(15); priv->txdes0_edotr_mask = BIT(15); @@ -1838,6 +1871,26 @@ static int ftgmac100_probe(struct platform_device *pdev) err = -EINVAL; goto err_phy_connect; } + } else if (np && of_phy_is_fixed_link(np)) { + struct phy_device *phy; + + err = of_phy_register_fixed_link(np); + if (err) { + dev_err(&pdev->dev, "Failed to register fixed PHY\n"); + goto err_phy_connect; + } + + phy = of_phy_get_and_connect(priv->netdev, np, + &ftgmac100_adjust_link); + if (!phy) { + dev_err(&pdev->dev, "Failed to connect to fixed PHY\n"); + of_phy_deregister_fixed_link(np); + err = -EINVAL; + goto err_phy_connect; + } + + /* Display what we found */ + phy_attached_info(phy); } else if (np && of_get_property(np, "phy-handle", NULL)) { struct phy_device *phy; @@ -1867,7 +1920,7 @@ static int ftgmac100_probe(struct platform_device *pdev) /* Display what we found */ phy_attached_info(phy); - } else if (np && !of_get_child_by_name(np, "mdio")) { + } else if (np && !ftgmac100_has_child_node(np, "mdio")) { /* Support legacy ASPEED devicetree descriptions that decribe a * MAC with an embedded MDIO controller but have no "mdio" * child node. Automatically scan the MDIO bus for available @@ -1890,6 +1943,11 @@ static int ftgmac100_probe(struct platform_device *pdev) err = ftgmac100_setup_clk(priv); if (err) goto err_phy_connect; + + /* Disable ast2600 problematic HW arbitration */ + if (of_device_is_compatible(np, "aspeed,ast2600-mac")) + iowrite32(FTGMAC100_TM_DEFAULT, + priv->base + FTGMAC100_OFFSET_TM); } /* Default ring sizes */ @@ -1907,6 +1965,11 @@ static int ftgmac100_probe(struct platform_device *pdev) /* AST2400 doesn't have working HW checksum generation */ if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac"))) netdev->hw_features &= ~NETIF_F_HW_CSUM; + + /* AST2600 tx checksum with NCSI is broken */ + if (priv->use_ncsi && of_device_is_compatible(np, "aspeed,ast2600-mac")) + netdev->hw_features &= ~NETIF_F_HW_CSUM; + if (np && of_get_property(np, "no-hw-checksum", NULL)) netdev->hw_features &= ~(NETIF_F_HW_CSUM | NETIF_F_RXCSUM); netdev->features |= netdev->hw_features; |