4 files changed, 85 insertions, 13 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 080c89093feb..c98586408005 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -653,7 +653,7 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
  **/
 static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
 {
-	u16 data = er32(POEMB);
+	u32 data = er32(POEMB);
 
 	if (active)
 		data |= E1000_PHY_CTRL_D0A_LPLU;
@@ -677,7 +677,7 @@ static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
  **/
 static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
 {
-	u16 data = er32(POEMB);
+	u32 data = er32(POEMB);
 
 	if (!active) {
 		data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 0349e2478df8..c11ac2756667 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev,
 	else
 		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
 
+	if (hw->phy.mdix == AUTO_ALL_MODES)
+		ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+	else
+		ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
 	return 0;
 }
 
@@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
 	default:
 		goto err_inval;
 	}
+
+	/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+	adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
 	return 0;
 
 err_inval:
@@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev,
 		return -EINVAL;
 	}
 
+	/*
+	 * MDI setting is only allowed when autoneg enabled because
+	 * some hardware doesn't allow MDI setting when speed or
+	 * duplex is forced.
+	 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		if (hw->phy.media_type != e1000_media_type_copper)
+			return -EOPNOTSUPP;
+
+		if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+		    (ecmd->autoneg != AUTONEG_ENABLE)) {
+			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+			return -EINVAL;
+		}
+	}
+
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
@@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev,
 			hw->fc.requested_mode = e1000_fc_default;
 	} else {
 		u32 speed = ethtool_cmd_speed(ecmd);
+		/* calling this overrides forced MDI setting */
 		if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
 			clear_bit(__E1000_RESETTING, &adapter->state);
 			return -EINVAL;
 		}
 	}
 
+	/* MDI-X => 2; MDI => 1; Auto => 3 */
+	if (ecmd->eth_tp_mdix_ctrl) {
+		/*
+		 * fix up the value for auto (3 => 0) as zero is mapped
+		 * internally to auto
+		 */
+		if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+			hw->phy.mdix = AUTO_ALL_MODES;
+		else
+			hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+	}
+
 	/* reset the link */
 
 	if (netif_running(adapter->netdev)) {
 		e1000e_down(adapter);
 		e1000e_up(adapter);
-	} else {
+	} else
 		e1000e_reset(adapter);
-	}
 
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return 0;
@@ -1905,7 +1942,8 @@ static int e1000_set_coalesce(struct net_device *netdev,
 		return -EINVAL;
 
 	if (ec->rx_coalesce_usecs == 4) {
-		adapter->itr = adapter->itr_setting = 4;
+		adapter->itr_setting = 4;
+		adapter->itr = adapter->itr_setting;
 	} else if (ec->rx_coalesce_usecs <= 3) {
 		adapter->itr = 20000;
 		adapter->itr_setting = ec->rx_coalesce_usecs;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3f0223ac4c7c..fb659dd8db03 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -56,7 +56,7 @@
 
 #define DRV_EXTRAVERSION "-k"
 
-#define DRV_VERSION "2.0.0" DRV_EXTRAVERSION
+#define DRV_VERSION "2.1.4" DRV_EXTRAVERSION
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -3446,7 +3446,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
 
 			/*
 			 * if short on Rx space, Rx wins and must trump Tx
-			 * adjustment or use Early Receive if available
+			 * adjustment
 			 */
 			if (pba < min_rx_space)
 				pba = min_rx_space;
@@ -3755,6 +3755,10 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data)
 	e_dbg("icr is %08X\n", icr);
 	if (icr & E1000_ICR_RXSEQ) {
 		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+		/*
+		 * Force memory writes to complete before acknowledging the
+		 * interrupt is handled.
+		 */
 		wmb();
 	}
 
@@ -3796,6 +3800,10 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 		goto msi_test_failed;
 	}
 
+	/*
+	 * Force memory writes to complete before enabling and firing an
+	 * interrupt.
+	 */
 	wmb();
 
 	e1000_irq_enable(adapter);
@@ -3807,7 +3815,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 
 	e1000_irq_disable(adapter);
 
-	rmb();
+	rmb();			/* read flags after interrupt has been fired */
 
 	if (adapter->flags & FLAG_MSI_TEST_FAILED) {
 		adapter->int_mode = E1000E_INT_MODE_LEGACY;
@@ -4670,7 +4678,7 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
 	struct e1000_buffer *buffer_info;
 	unsigned int i;
 	u32 cmd_length = 0;
-	u16 ipcse = 0, tucse, mss;
+	u16 ipcse = 0, mss;
 	u8 ipcss, ipcso, tucss, tucso, hdr_len;
 
 	if (!skb_is_gso(skb))
@@ -4704,7 +4712,6 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
 	ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
 	tucss = skb_transport_offset(skb);
 	tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
-	tucse = 0;
 
 	cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
 	               E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
@@ -4718,7 +4725,7 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb)
 	context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
 	context_desc->upper_setup.tcp_fields.tucss = tucss;
 	context_desc->upper_setup.tcp_fields.tucso = tucso;
-	context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+	context_desc->upper_setup.tcp_fields.tucse = 0;
 	context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
 	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
 	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index b860d4f7ea2a..fc62a3f3a5be 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -84,8 +84,9 @@ static const u16 e1000_igp_2_cable_length_table[] = {
 #define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
 
 /* I82577 PHY Control 2 */
-#define I82577_PHY_CTRL2_AUTO_MDIX        0x0400
-#define I82577_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+#define I82577_PHY_CTRL2_MANUAL_MDIX      0x0200
+#define I82577_PHY_CTRL2_AUTO_MDI_MDIX    0x0400
+#define I82577_PHY_CTRL2_MDIX_CFG_MASK    0x0600
 
 /* I82577 PHY Diagnostics Status */
 #define I82577_DSTATUS_CABLE_LENGTH       0x03FC
@@ -702,6 +703,32 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
+	/* Set MDI/MDIX mode */
+	ret_val = e1e_rphy(hw, I82577_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		return ret_val;
+	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
+	/*
+	 * Options:
+	 *   0 - Auto (default)
+	 *   1 - MDI mode
+	 *   2 - MDI-X mode
+	 */
+	switch (hw->phy.mdix) {
+	case 1:
+		break;
+	case 2:
+		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
+		break;
+	case 0:
+	default:
+		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
+		break;
+	}
+	ret_val = e1e_wphy(hw, I82577_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		return ret_val;
+
 	return e1000_set_master_slave_mode(hw);
 }