diff options
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_pf.c')
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 46 |
1 files changed, 29 insertions, 17 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 682299dd0ce4..23fb319fd2a0 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -867,10 +867,6 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); qmap_idx = qmap_stride * vf_idx; - /* MAP Tx queue back to 0 temporarily, and disable it */ - fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); - fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); - /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is * used here to indicate to the VF that it will not have privilege to * write VLAN_TABLE. All policy is enforced on the PF but this allows @@ -886,9 +882,35 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC, vf_info->mac, vf_vid); - /* load onto outgoing mailbox, ignore any errors on enqueue */ - if (vf_info->mbx.ops.enqueue_tx) - vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + /* Configure Queue control register with new VLAN ID. The TXQCTL + * register is RO from the VF, so the PF must do this even in the + * case of notifying the VF of a new VID via the mailbox. + */ + txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & + FM10K_TXQCTL_VID_MASK; + txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | + FM10K_TXQCTL_VF | vf_idx; + + for (i = 0; i < queues_per_pool; i++) + fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); + + /* try loading a message onto outgoing mailbox first */ + if (vf_info->mbx.ops.enqueue_tx) { + err = vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + if (err != FM10K_MBX_ERR_NO_MBX) + return err; + err = 0; + } + + /* If we aren't connected to a mailbox, this is most likely because + * the VF driver is not running. It should thus be safe to re-map + * queues and use the registers to pass the MAC address so that the VF + * driver gets correct information during its initialization. + */ + + /* MAP Tx queue back to 0 temporarily, and disable it */ + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); + fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); /* verify ring has disabled before modifying base address registers */ txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx)); @@ -927,16 +949,6 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, FM10K_TDLEN_ITR_SCALE_SHIFT); err_out: - /* configure Queue control register */ - txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & - FM10K_TXQCTL_VID_MASK; - txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | - FM10K_TXQCTL_VF | vf_idx; - - /* assign VLAN ID */ - for (i = 0; i < queues_per_pool; i++) - fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); - /* restore the queue back to VF ownership */ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); return err; |