aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igb/e1000_82575.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_82575.c')
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 438b42ce2cd9..8d6e44ee1895 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -638,7 +638,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
dev_spec->sgmii_active = true;
break;
}
- /* fall through - for I2C based SGMII */
+ fallthrough; /* for I2C based SGMII */
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
/* read media type from SFP EEPROM */
ret_val = igb_set_sfp_media_type_82575(hw);
@@ -1704,7 +1704,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
/* disable PCS autoneg and support parallel detect only */
pcs_autoneg = false;
- /* fall through */
+ fallthrough;
default:
if (hw->mac.type == e1000_82575 ||
hw->mac.type == e1000_82576) {
@@ -2207,7 +2207,7 @@ out:
* igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
* @hw: pointer to the HW structure
*
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
* the values found in the EEPROM. This addresses an issue in which these
* bits are not restored from EEPROM after reset.
**/
@@ -2554,7 +2554,7 @@ out:
/**
* __igb_access_emi_reg - Read/write EMI register
* @hw: pointer to the HW structure
- * @addr: EMI address to program
+ * @address: EMI address to program
* @data: pointer to value to read/write from/to the EMI address
* @read: boolean flag to indicate read or write
**/
@@ -2590,7 +2590,7 @@ s32 igb_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
* igb_set_eee_i350 - Enable/disable EEE support
* @hw: pointer to the HW structure
* @adv1G: boolean flag enabling 1G EEE advertisement
- * @adv100m: boolean flag enabling 100M EEE advertisement
+ * @adv100M: boolean flag enabling 100M EEE advertisement
*
* Enable/disable EEE based on setting in dev_spec structure.
*
@@ -2646,7 +2646,7 @@ out:
* igb_set_eee_i354 - Enable/disable EEE support
* @hw: pointer to the HW structure
* @adv1G: boolean flag enabling 1G EEE advertisement
- * @adv100m: boolean flag enabling 100M EEE advertisement
+ * @adv100M: boolean flag enabling 100M EEE advertisement
*
* Enable/disable EEE legacy mode based on setting in dev_spec structure.
*
@@ -2756,6 +2756,7 @@ out:
return ret_val;
}
+#ifdef CONFIG_IGB_HWMON
static const u8 e1000_emc_temp_data[4] = {
E1000_EMC_INTERNAL_DATA,
E1000_EMC_DIODE1_DATA,
@@ -2769,7 +2770,6 @@ static const u8 e1000_emc_therm_limit[4] = {
E1000_EMC_DIODE3_THERM_LIMIT
};
-#ifdef CONFIG_IGB_HWMON
/**
* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
* @hw: pointer to hardware structure