diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_defines.h')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_defines.h | 108 |
1 files changed, 54 insertions, 54 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index e9f23ee8f15e..2997c443c5dc 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -530,65 +530,65 @@ /* Time Sync Interrupt Cause/Mask Register Bits */ -#define TSINTR_SYS_WRAP (1 << 0) /* SYSTIM Wrap around. */ -#define TSINTR_TXTS (1 << 1) /* Transmit Timestamp. */ -#define TSINTR_RXTS (1 << 2) /* Receive Timestamp. */ -#define TSINTR_TT0 (1 << 3) /* Target Time 0 Trigger. */ -#define TSINTR_TT1 (1 << 4) /* Target Time 1 Trigger. */ -#define TSINTR_AUTT0 (1 << 5) /* Auxiliary Timestamp 0 Taken. */ -#define TSINTR_AUTT1 (1 << 6) /* Auxiliary Timestamp 1 Taken. */ -#define TSINTR_TADJ (1 << 7) /* Time Adjust Done. */ +#define TSINTR_SYS_WRAP BIT(0) /* SYSTIM Wrap around. */ +#define TSINTR_TXTS BIT(1) /* Transmit Timestamp. */ +#define TSINTR_RXTS BIT(2) /* Receive Timestamp. */ +#define TSINTR_TT0 BIT(3) /* Target Time 0 Trigger. */ +#define TSINTR_TT1 BIT(4) /* Target Time 1 Trigger. */ +#define TSINTR_AUTT0 BIT(5) /* Auxiliary Timestamp 0 Taken. */ +#define TSINTR_AUTT1 BIT(6) /* Auxiliary Timestamp 1 Taken. */ +#define TSINTR_TADJ BIT(7) /* Time Adjust Done. */ #define TSYNC_INTERRUPTS TSINTR_TXTS #define E1000_TSICR_TXTS TSINTR_TXTS /* TSAUXC Configuration Bits */ -#define TSAUXC_EN_TT0 (1 << 0) /* Enable target time 0. */ -#define TSAUXC_EN_TT1 (1 << 1) /* Enable target time 1. */ -#define TSAUXC_EN_CLK0 (1 << 2) /* Enable Configurable Frequency Clock 0. */ -#define TSAUXC_SAMP_AUT0 (1 << 3) /* Latch SYSTIML/H into AUXSTMPL/0. */ -#define TSAUXC_ST0 (1 << 4) /* Start Clock 0 Toggle on Target Time 0. */ -#define TSAUXC_EN_CLK1 (1 << 5) /* Enable Configurable Frequency Clock 1. */ -#define TSAUXC_SAMP_AUT1 (1 << 6) /* Latch SYSTIML/H into AUXSTMPL/1. */ -#define TSAUXC_ST1 (1 << 7) /* Start Clock 1 Toggle on Target Time 1. */ -#define TSAUXC_EN_TS0 (1 << 8) /* Enable hardware timestamp 0. */ -#define TSAUXC_AUTT0 (1 << 9) /* Auxiliary Timestamp Taken. */ -#define TSAUXC_EN_TS1 (1 << 10) /* Enable hardware timestamp 0. */ -#define TSAUXC_AUTT1 (1 << 11) /* Auxiliary Timestamp Taken. */ -#define TSAUXC_PLSG (1 << 17) /* Generate a pulse. */ -#define TSAUXC_DISABLE (1 << 31) /* Disable SYSTIM Count Operation. */ +#define TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */ +#define TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */ +#define TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */ +#define TSAUXC_SAMP_AUT0 BIT(3) /* Latch SYSTIML/H into AUXSTMPL/0. */ +#define TSAUXC_ST0 BIT(4) /* Start Clock 0 Toggle on Target Time 0. */ +#define TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */ +#define TSAUXC_SAMP_AUT1 BIT(6) /* Latch SYSTIML/H into AUXSTMPL/1. */ +#define TSAUXC_ST1 BIT(7) /* Start Clock 1 Toggle on Target Time 1. */ +#define TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */ +#define TSAUXC_AUTT1 BIT(11) /* Auxiliary Timestamp Taken. */ +#define TSAUXC_PLSG BIT(17) /* Generate a pulse. */ +#define TSAUXC_DISABLE BIT(31) /* Disable SYSTIM Count Operation. */ /* SDP Configuration Bits */ -#define AUX0_SEL_SDP0 (0 << 0) /* Assign SDP0 to auxiliary time stamp 0. */ -#define AUX0_SEL_SDP1 (1 << 0) /* Assign SDP1 to auxiliary time stamp 0. */ -#define AUX0_SEL_SDP2 (2 << 0) /* Assign SDP2 to auxiliary time stamp 0. */ -#define AUX0_SEL_SDP3 (3 << 0) /* Assign SDP3 to auxiliary time stamp 0. */ -#define AUX0_TS_SDP_EN (1 << 2) /* Enable auxiliary time stamp trigger 0. */ -#define AUX1_SEL_SDP0 (0 << 3) /* Assign SDP0 to auxiliary time stamp 1. */ -#define AUX1_SEL_SDP1 (1 << 3) /* Assign SDP1 to auxiliary time stamp 1. */ -#define AUX1_SEL_SDP2 (2 << 3) /* Assign SDP2 to auxiliary time stamp 1. */ -#define AUX1_SEL_SDP3 (3 << 3) /* Assign SDP3 to auxiliary time stamp 1. */ -#define AUX1_TS_SDP_EN (1 << 5) /* Enable auxiliary time stamp trigger 1. */ -#define TS_SDP0_SEL_TT0 (0 << 6) /* Target time 0 is output on SDP0. */ -#define TS_SDP0_SEL_TT1 (1 << 6) /* Target time 1 is output on SDP0. */ -#define TS_SDP0_SEL_FC0 (2 << 6) /* Freq clock 0 is output on SDP0. */ -#define TS_SDP0_SEL_FC1 (3 << 6) /* Freq clock 1 is output on SDP0. */ -#define TS_SDP0_EN (1 << 8) /* SDP0 is assigned to Tsync. */ -#define TS_SDP1_SEL_TT0 (0 << 9) /* Target time 0 is output on SDP1. */ -#define TS_SDP1_SEL_TT1 (1 << 9) /* Target time 1 is output on SDP1. */ -#define TS_SDP1_SEL_FC0 (2 << 9) /* Freq clock 0 is output on SDP1. */ -#define TS_SDP1_SEL_FC1 (3 << 9) /* Freq clock 1 is output on SDP1. */ -#define TS_SDP1_EN (1 << 11) /* SDP1 is assigned to Tsync. */ -#define TS_SDP2_SEL_TT0 (0 << 12) /* Target time 0 is output on SDP2. */ -#define TS_SDP2_SEL_TT1 (1 << 12) /* Target time 1 is output on SDP2. */ -#define TS_SDP2_SEL_FC0 (2 << 12) /* Freq clock 0 is output on SDP2. */ -#define TS_SDP2_SEL_FC1 (3 << 12) /* Freq clock 1 is output on SDP2. */ -#define TS_SDP2_EN (1 << 14) /* SDP2 is assigned to Tsync. */ -#define TS_SDP3_SEL_TT0 (0 << 15) /* Target time 0 is output on SDP3. */ -#define TS_SDP3_SEL_TT1 (1 << 15) /* Target time 1 is output on SDP3. */ -#define TS_SDP3_SEL_FC0 (2 << 15) /* Freq clock 0 is output on SDP3. */ -#define TS_SDP3_SEL_FC1 (3 << 15) /* Freq clock 1 is output on SDP3. */ -#define TS_SDP3_EN (1 << 17) /* SDP3 is assigned to Tsync. */ +#define AUX0_SEL_SDP0 (0u << 0) /* Assign SDP0 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP1 (1u << 0) /* Assign SDP1 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP2 (2u << 0) /* Assign SDP2 to auxiliary time stamp 0. */ +#define AUX0_SEL_SDP3 (3u << 0) /* Assign SDP3 to auxiliary time stamp 0. */ +#define AUX0_TS_SDP_EN (1u << 2) /* Enable auxiliary time stamp trigger 0. */ +#define AUX1_SEL_SDP0 (0u << 3) /* Assign SDP0 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP1 (1u << 3) /* Assign SDP1 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP2 (2u << 3) /* Assign SDP2 to auxiliary time stamp 1. */ +#define AUX1_SEL_SDP3 (3u << 3) /* Assign SDP3 to auxiliary time stamp 1. */ +#define AUX1_TS_SDP_EN (1u << 5) /* Enable auxiliary time stamp trigger 1. */ +#define TS_SDP0_SEL_TT0 (0u << 6) /* Target time 0 is output on SDP0. */ +#define TS_SDP0_SEL_TT1 (1u << 6) /* Target time 1 is output on SDP0. */ +#define TS_SDP0_SEL_FC0 (2u << 6) /* Freq clock 0 is output on SDP0. */ +#define TS_SDP0_SEL_FC1 (3u << 6) /* Freq clock 1 is output on SDP0. */ +#define TS_SDP0_EN (1u << 8) /* SDP0 is assigned to Tsync. */ +#define TS_SDP1_SEL_TT0 (0u << 9) /* Target time 0 is output on SDP1. */ +#define TS_SDP1_SEL_TT1 (1u << 9) /* Target time 1 is output on SDP1. */ +#define TS_SDP1_SEL_FC0 (2u << 9) /* Freq clock 0 is output on SDP1. */ +#define TS_SDP1_SEL_FC1 (3u << 9) /* Freq clock 1 is output on SDP1. */ +#define TS_SDP1_EN (1u << 11) /* SDP1 is assigned to Tsync. */ +#define TS_SDP2_SEL_TT0 (0u << 12) /* Target time 0 is output on SDP2. */ +#define TS_SDP2_SEL_TT1 (1u << 12) /* Target time 1 is output on SDP2. */ +#define TS_SDP2_SEL_FC0 (2u << 12) /* Freq clock 0 is output on SDP2. */ +#define TS_SDP2_SEL_FC1 (3u << 12) /* Freq clock 1 is output on SDP2. */ +#define TS_SDP2_EN (1u << 14) /* SDP2 is assigned to Tsync. */ +#define TS_SDP3_SEL_TT0 (0u << 15) /* Target time 0 is output on SDP3. */ +#define TS_SDP3_SEL_TT1 (1u << 15) /* Target time 1 is output on SDP3. */ +#define TS_SDP3_SEL_FC0 (2u << 15) /* Freq clock 0 is output on SDP3. */ +#define TS_SDP3_SEL_FC1 (3u << 15) /* Freq clock 1 is output on SDP3. */ +#define TS_SDP3_EN (1u << 17) /* SDP3 is assigned to Tsync. */ #define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ #define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ @@ -997,8 +997,8 @@ #define E1000_M88E1543_FIBER_CTRL 0x0 #define E1000_EEE_ADV_DEV_I354 7 #define E1000_EEE_ADV_ADDR_I354 60 -#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ -#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_EEE_ADV_100_SUPPORTED BIT(1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED BIT(2) /* 1000BaseT EEE Supported */ #define E1000_PCS_STATUS_DEV_I354 3 #define E1000_PCS_STATUS_ADDR_I354 1 #define E1000_PCS_STATUS_TX_LPI_IND 0x0200 /* Tx in LPI state */ |