aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_common.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c63
1 files changed, 35 insertions, 28 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 06d8f3cfa099..4c1c26732b67 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -57,6 +57,11 @@ static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
u16 offset);
static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+/* Base table for registers values that change by MAC */
+const u32 ixgbe_mvals_8259X[IXGBE_MVALS_IDX_LIMIT] = {
+ IXGBE_MVALS_INIT(8259X)
+};
+
/**
* ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow
* control
@@ -91,6 +96,8 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_T3_LOM:
case IXGBE_DEV_ID_X540T:
case IXGBE_DEV_ID_X540T1:
+ case IXGBE_DEV_ID_X550T:
+ case IXGBE_DEV_ID_X550EM_X_10G_T:
supported = true;
break;
default:
@@ -463,7 +470,7 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
}
}
- if (hw->mac.type == ixgbe_mac_X540) {
+ if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) {
if (hw->phy.id == 0)
hw->phy.ops.identify(hw);
hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, MDIO_MMD_PCS, &i);
@@ -681,7 +688,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
bus->lan_id = bus->func;
/* check for a port swap */
- reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ reg = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw));
if (reg & IXGBE_FACTPS_LFS)
bus->func ^= 0x1;
}
@@ -799,7 +806,7 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
* Check for EEPROM present first.
* If not present leave as none
*/
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
if (eec & IXGBE_EEC_PRES) {
eeprom->type = ixgbe_eeprom_spi;
@@ -1283,14 +1290,14 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
return IXGBE_ERR_SWFW_SYNC;
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
/* Request EEPROM Access */
eec |= IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
if (eec & IXGBE_EEC_GNT)
break;
udelay(5);
@@ -1299,7 +1306,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
/* Release if grant not acquired */
if (!(eec & IXGBE_EEC_GNT)) {
eec &= ~IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
hw_dbg(hw, "Could not acquire EEPROM grant\n");
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
@@ -1309,7 +1316,7 @@ static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
/* Setup EEPROM for Read/Write */
/* Clear CS and SK */
eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
return 0;
@@ -1333,7 +1340,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
* If the SMBI bit is 0 when we read it, then the bit will be
* set and we have the semaphore
*/
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
if (!(swsm & IXGBE_SWSM_SMBI))
break;
usleep_range(50, 100);
@@ -1353,7 +1360,7 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
* If the SMBI bit is 0 when we read it, then the bit will be
* set and we have the semaphore
*/
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
if (swsm & IXGBE_SWSM_SMBI) {
hw_dbg(hw, "Software semaphore SMBI between device drivers not granted.\n");
return IXGBE_ERR_EEPROM;
@@ -1362,16 +1369,16 @@ static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
/* Now get the semaphore between SW/FW through the SWESMBI bit */
for (i = 0; i < timeout; i++) {
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
/* Set the SW EEPROM semaphore bit to request access */
swsm |= IXGBE_SWSM_SWESMBI;
- IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm);
/* If we set the bit successfully then we got the
* semaphore.
*/
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
if (swsm & IXGBE_SWSM_SWESMBI)
break;
@@ -1400,11 +1407,11 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
{
u32 swsm;
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw));
/* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
- IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm);
IXGBE_WRITE_FLUSH(hw);
}
@@ -1454,15 +1461,15 @@ static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
{
u32 eec;
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
/* Toggle CS to flush commands */
eec |= IXGBE_EEC_CS;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
eec &= ~IXGBE_EEC_CS;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
}
@@ -1480,7 +1487,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
u32 mask;
u32 i;
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
/*
* Mask is used to shift "count" bits of "data" out to the EEPROM
@@ -1501,7 +1508,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
else
eec &= ~IXGBE_EEC_DI;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
@@ -1518,7 +1525,7 @@ static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
/* We leave the "DI" bit set to "0" when we leave this routine. */
eec &= ~IXGBE_EEC_DI;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
}
@@ -1539,7 +1546,7 @@ static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
* the value of the "DO" bit. During this "shifting in" process the
* "DI" bit should always be clear.
*/
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
@@ -1547,7 +1554,7 @@ static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
data = data << 1;
ixgbe_raise_eeprom_clk(hw, &eec);
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
eec &= ~(IXGBE_EEC_DI);
if (eec & IXGBE_EEC_DO)
@@ -1571,7 +1578,7 @@ static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
* (setting the SK bit), then delay
*/
*eec = *eec | IXGBE_EEC_SK;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), *eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
}
@@ -1588,7 +1595,7 @@ static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
* delay
*/
*eec = *eec & ~IXGBE_EEC_SK;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), *eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
}
@@ -1601,19 +1608,19 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
{
u32 eec;
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw));
eec |= IXGBE_EEC_CS; /* Pull CS high */
eec &= ~IXGBE_EEC_SK; /* Lower SCK */
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
IXGBE_WRITE_FLUSH(hw);
udelay(1);
/* Stop requesting EEPROM access */
eec &= ~IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), eec);
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.