diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/igc/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc.h | 16 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_base.c | 122 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_base.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_defines.h | 79 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_hw.h | 54 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_mac.c | 45 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_mac.h | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_main.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_phy.c | 457 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_phy.h | 20 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igc/igc_regs.h | 3 |
12 files changed, 820 insertions, 1 deletions
diff --git a/drivers/net/ethernet/intel/igc/Makefile b/drivers/net/ethernet/intel/igc/Makefile index 2b5378d96c7b..4387f6ba8e67 100644 --- a/drivers/net/ethernet/intel/igc/Makefile +++ b/drivers/net/ethernet/intel/igc/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_IGC) += igc.o -igc-objs := igc_main.o igc_mac.o igc_i225.o igc_base.o igc_nvm.o +igc-objs := igc_main.o igc_mac.o igc_i225.o igc_base.o igc_nvm.o igc_phy.o diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h index 6dcf51c112f4..7cfbd83d25e4 100644 --- a/drivers/net/ethernet/intel/igc/igc.h +++ b/drivers/net/ethernet/intel/igc/igc.h @@ -359,6 +359,22 @@ static inline u16 igc_desc_unused(const struct igc_ring *ring) return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; } +static inline s32 igc_get_phy_info(struct igc_hw *hw) +{ + if (hw->phy.ops.get_phy_info) + return hw->phy.ops.get_phy_info(hw); + + return 0; +} + +static inline s32 igc_reset_phy(struct igc_hw *hw) +{ + if (hw->phy.ops.reset) + return hw->phy.ops.reset(hw); + + return 0; +} + static inline struct netdev_queue *txring_txq(const struct igc_ring *tx_ring) { return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index); diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c index 2d49814966d3..55faef987479 100644 --- a/drivers/net/ethernet/intel/igc/igc_base.c +++ b/drivers/net/ethernet/intel/igc/igc_base.c @@ -124,6 +124,22 @@ static s32 igc_reset_hw_base(struct igc_hw *hw) } /** + * igc_get_phy_id_base - Retrieve PHY addr and id + * @hw: pointer to the HW structure + * + * Retrieves the PHY address and ID for both PHY's which do and do not use + * sgmi interface. + */ +static s32 igc_get_phy_id_base(struct igc_hw *hw) +{ + s32 ret_val = 0; + + ret_val = igc_get_phy_id(hw); + + return ret_val; +} + +/** * igc_init_nvm_params_base - Init NVM func ptrs. * @hw: pointer to the HW structure */ @@ -187,6 +203,59 @@ static s32 igc_init_mac_params_base(struct igc_hw *hw) return 0; } +/** + * igc_init_phy_params_base - Init PHY func ptrs. + * @hw: pointer to the HW structure + */ +static s32 igc_init_phy_params_base(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u32 ctrl_ext; + + if (hw->phy.media_type != igc_media_type_copper) { + phy->type = igc_phy_none; + goto out; + } + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT_2500; + phy->reset_delay_us = 100; + + ctrl_ext = rd32(IGC_CTRL_EXT); + + /* set lan id */ + hw->bus.func = (rd32(IGC_STATUS) & IGC_STATUS_FUNC_MASK) >> + IGC_STATUS_FUNC_SHIFT; + + /* Make sure the PHY is in a good state. Several people have reported + * firmware leaving the PHY's page select register set to something + * other than the default of zero, which causes the PHY ID read to + * access something other than the intended register. + */ + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + hw_dbg("Error resetting the PHY.\n"); + goto out; + } + + ret_val = igc_get_phy_id_base(hw); + if (ret_val) + return ret_val; + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case I225_I_PHY_ID: + phy->type = igc_phy_i225; + break; + default: + ret_val = -IGC_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + static s32 igc_get_invariants_base(struct igc_hw *hw) { u32 link_mode = 0; @@ -211,6 +280,8 @@ static s32 igc_get_invariants_base(struct igc_hw *hw) break; } + /* setup PHY parameters */ + ret_val = igc_init_phy_params_base(hw); if (ret_val) goto out; @@ -219,6 +290,34 @@ out: } /** + * igc_acquire_phy_base - Acquire rights to access PHY + * @hw: pointer to the HW structure + * + * Acquire access rights to the correct PHY. This is a + * function pointer entry point called by the api module. + */ +static s32 igc_acquire_phy_base(struct igc_hw *hw) +{ + u16 mask = IGC_SWFW_PHY0_SM; + + return hw->mac.ops.acquire_swfw_sync(hw, mask); +} + +/** + * igc_release_phy_base - Release rights to access PHY + * @hw: pointer to the HW structure + * + * A wrapper to release access rights to the correct PHY. This is a + * function pointer entry point called by the api module. + */ +static void igc_release_phy_base(struct igc_hw *hw) +{ + u16 mask = IGC_SWFW_PHY0_SM; + + hw->mac.ops.release_swfw_sync(hw, mask); +} + +/** * igc_get_link_up_info_base - Get link speed/duplex info * @hw: pointer to the HW structure * @speed: stores the current speed @@ -290,6 +389,20 @@ static s32 igc_read_mac_addr_base(struct igc_hw *hw) } /** + * igc_power_down_phy_copper_base - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + */ +void igc_power_down_phy_copper_base(struct igc_hw *hw) +{ + /* If the management interface is not enabled, then power down */ + if (!(igc_enable_mng_pass_thru(hw) || igc_check_reset_block(hw))) + igc_power_down_phy_copper(hw); +} + +/** * igc_rx_fifo_flush_base - Clean rx fifo after Rx enable * @hw: pointer to the HW structure * @@ -373,7 +486,16 @@ static struct igc_mac_operations igc_mac_ops_base = { .get_speed_and_duplex = igc_get_link_up_info_base, }; +static const struct igc_phy_operations igc_phy_ops_base = { + .acquire = igc_acquire_phy_base, + .release = igc_release_phy_base, + .reset = igc_phy_hw_reset, + .read_reg = igc_read_phy_reg_gpy, + .write_reg = igc_write_phy_reg_gpy, +}; + const struct igc_info igc_base_info = { .get_invariants = igc_get_invariants_base, .mac_ops = &igc_mac_ops_base, + .phy_ops = &igc_phy_ops_base, }; diff --git a/drivers/net/ethernet/intel/igc/igc_base.h b/drivers/net/ethernet/intel/igc/igc_base.h index 802a0cbd3123..35588fa7b8c5 100644 --- a/drivers/net/ethernet/intel/igc/igc_base.h +++ b/drivers/net/ethernet/intel/igc/igc_base.h @@ -6,6 +6,7 @@ /* forward declaration */ void igc_rx_fifo_flush_base(struct igc_hw *hw); +void igc_power_down_phy_copper_base(struct igc_hw *hw); /* Transmit Descriptor - Advanced */ union igc_adv_tx_desc { diff --git a/drivers/net/ethernet/intel/igc/igc_defines.h b/drivers/net/ethernet/intel/igc/igc_defines.h index e5736577009a..d271671e6825 100644 --- a/drivers/net/ethernet/intel/igc/igc_defines.h +++ b/drivers/net/ethernet/intel/igc/igc_defines.h @@ -47,11 +47,14 @@ #define IGC_ERR_MAC_INIT 5 #define IGC_ERR_RESET 9 #define IGC_ERR_MASTER_REQUESTS_PENDING 10 +#define IGC_ERR_BLK_PHY_RESET 12 #define IGC_ERR_SWFW_SYNC 13 /* Device Control */ #define IGC_CTRL_RST 0x04000000 /* Global reset */ +#define IGC_CTRL_PHY_RST 0x80000000 /* PHY Reset */ + /* PBA constants */ #define IGC_PBA_34K 0x0022 @@ -123,6 +126,22 @@ #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 +/* 1Gbps and 2.5Gbps half duplex is not supported, nor spec-compliant. */ +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 +#define ADVERTISE_2500_HALF 0x0040 /* Not used, just FYI */ +#define ADVERTISE_2500_FULL 0x0080 + +#define IGC_ALL_SPEED_DUPLEX_2500 ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL | ADVERTISE_2500_FULL) + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT_2500 IGC_ALL_SPEED_DUPLEX_2500 + /* Interrupt Cause Read */ #define IGC_ICR_TXDW BIT(0) /* Transmit desc written back */ #define IGC_ICR_TXQE BIT(1) /* Transmit Queue empty */ @@ -208,6 +227,7 @@ /* Management Control */ #define IGC_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define IGC_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ /* Receive Control */ #define IGC_RCTL_RST 0x00000001 /* Software reset */ @@ -256,6 +276,65 @@ #define I225_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */ #define I225_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */ +/* GPY211 - I225 defines */ +#define GPY_MMD_MASK 0xFFFF0000 +#define GPY_MMD_SHIFT 16 +#define GPY_REG_MASK 0x0000FFFF + +#define IGC_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ + +/* MAC definitions */ +#define IGC_FACTPS_MNGCG 0x20000000 +#define IGC_FWSM_MODE_MASK 0xE +#define IGC_FWSM_MODE_SHIFT 1 + +/* Management Control */ +#define IGC_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define IGC_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ + +/* PHY */ +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define IGC_GEN_POLL_TIMEOUT 1920 + +/* PHY Control Register */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ + +/* Bit definitions for valid PHY IDs. I = Integrated E = External */ +#define I225_I_PHY_ID 0x67C9DC00 + +/* MDI Control */ +#define IGC_MDIC_DATA_MASK 0x0000FFFF +#define IGC_MDIC_REG_MASK 0x001F0000 +#define IGC_MDIC_REG_SHIFT 16 +#define IGC_MDIC_PHY_MASK 0x03E00000 +#define IGC_MDIC_PHY_SHIFT 21 +#define IGC_MDIC_OP_WRITE 0x04000000 +#define IGC_MDIC_OP_READ 0x08000000 +#define IGC_MDIC_READY 0x10000000 +#define IGC_MDIC_INT_EN 0x20000000 +#define IGC_MDIC_ERROR 0x40000000 +#define IGC_MDIC_DEST 0x80000000 + #define IGC_N0_QUEUE -1 #endif /* _IGC_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/igc/igc_hw.h b/drivers/net/ethernet/intel/igc/igc_hw.h index 107d6461924b..65d1446ff0c3 100644 --- a/drivers/net/ethernet/intel/igc/igc_hw.h +++ b/drivers/net/ethernet/intel/igc/igc_hw.h @@ -11,6 +11,7 @@ #include "igc_regs.h" #include "igc_defines.h" #include "igc_mac.h" +#include "igc_phy.h" #include "igc_nvm.h" #include "igc_i225.h" #include "igc_base.h" @@ -18,6 +19,8 @@ #define IGC_DEV_ID_I225_LM 0x15F2 #define IGC_DEV_ID_I225_V 0x15F3 +#define IGC_FUNC_0 0 + /* Function pointers for the MAC. */ struct igc_mac_operations { s32 (*check_for_link)(struct igc_hw *hw); @@ -44,6 +47,12 @@ enum igc_phy_type { igc_phy_i225, }; +enum igc_media_type { + igc_media_type_unknown = 0, + igc_media_type_copper = 1, + igc_num_media_types +}; + enum igc_nvm_type { igc_nvm_unknown = 0, igc_nvm_flash_hw, @@ -84,6 +93,7 @@ struct igc_mac_info { bool adaptive_ifs; bool has_fwsm; + bool asf_firmware_present; bool arc_subsystem_valid; bool autoneg; @@ -101,6 +111,20 @@ struct igc_nvm_operations { s32 (*valid_led_default)(struct igc_hw *hw, u16 *data); }; +struct igc_phy_operations { + s32 (*acquire)(struct igc_hw *hw); + s32 (*check_polarity)(struct igc_hw *hw); + s32 (*check_reset_block)(struct igc_hw *hw); + s32 (*force_speed_duplex)(struct igc_hw *hw); + s32 (*get_cfg_done)(struct igc_hw *hw); + s32 (*get_cable_length)(struct igc_hw *hw); + s32 (*get_phy_info)(struct igc_hw *hw); + s32 (*read_reg)(struct igc_hw *hw, u32 address, u16 *data); + void (*release)(struct igc_hw *hw); + s32 (*reset)(struct igc_hw *hw); + s32 (*write_reg)(struct igc_hw *hw, u32 address, u16 data); +}; + struct igc_nvm_info { struct igc_nvm_operations ops; enum igc_nvm_type type; @@ -115,6 +139,35 @@ struct igc_nvm_info { u16 page_size; }; +struct igc_phy_info { + struct igc_phy_operations ops; + + enum igc_phy_type type; + + u32 addr; + u32 id; + u32 reset_delay_us; /* in usec */ + u32 revision; + + enum igc_media_type media_type; + + u16 autoneg_advertised; + u16 autoneg_mask; + u16 cable_length; + u16 max_cable_length; + u16 min_cable_length; + u16 pair_length[4]; + + u8 mdix; + + bool disable_polarity_correction; + bool is_mdix; + bool polarity_correction; + bool reset_disable; + bool speed_downgraded; + bool autoneg_wait_to_complete; +}; + struct igc_bus_info { u16 func; u16 pci_cmd_word; @@ -155,6 +208,7 @@ struct igc_hw { struct igc_mac_info mac; struct igc_fc_info fc; struct igc_nvm_info nvm; + struct igc_phy_info phy; struct igc_bus_info bus; diff --git a/drivers/net/ethernet/intel/igc/igc_mac.c b/drivers/net/ethernet/intel/igc/igc_mac.c index 249ac03b05d8..fce7f7f5aa46 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.c +++ b/drivers/net/ethernet/intel/igc/igc_mac.c @@ -338,6 +338,7 @@ s32 igc_check_for_copper_link(struct igc_hw *hw) * link. If so, then we want to get the current speed/duplex * of the PHY. */ + ret_val = igc_phy_has_link(hw, 1, 0, &link); if (ret_val) goto out; @@ -349,6 +350,7 @@ s32 igc_check_for_copper_link(struct igc_hw *hw) /* Check if there was DownShift, must be checked * immediately after link-up */ + igc_check_downshift(hw); /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. @@ -488,3 +490,46 @@ void igc_put_hw_semaphore(struct igc_hw *hw) wr32(IGC_SWSM, swsm); } + +/** + * igc_enable_mng_pass_thru - Enable processing of ARP's + * @hw: pointer to the HW structure + * + * Verifies the hardware needs to leave interface enabled so that frames can + * be directed to and from the management interface. + */ +bool igc_enable_mng_pass_thru(struct igc_hw *hw) +{ + bool ret_val = false; + u32 fwsm, factps; + u32 manc; + + if (!hw->mac.asf_firmware_present) + goto out; + + manc = rd32(IGC_MANC); + + if (!(manc & IGC_MANC_RCV_TCO_EN)) + goto out; + + if (hw->mac.arc_subsystem_valid) { + fwsm = rd32(IGC_FWSM); + factps = rd32(IGC_FACTPS); + + if (!(factps & IGC_FACTPS_MNGCG) && + ((fwsm & IGC_FWSM_MODE_MASK) == + (igc_mng_mode_pt << IGC_FWSM_MODE_SHIFT))) { + ret_val = true; + goto out; + } + } else { + if ((manc & IGC_MANC_SMBUS_EN) && + !(manc & IGC_MANC_ASF_EN)) { + ret_val = true; + goto out; + } + } + +out: + return ret_val; +} diff --git a/drivers/net/ethernet/intel/igc/igc_mac.h b/drivers/net/ethernet/intel/igc/igc_mac.h index 88599661d017..c842cc561123 100644 --- a/drivers/net/ethernet/intel/igc/igc_mac.h +++ b/drivers/net/ethernet/intel/igc/igc_mac.h @@ -5,6 +5,7 @@ #define _IGC_MAC_H_ #include "igc_hw.h" +#include "igc_phy.h" #include "igc_defines.h" #ifndef IGC_REMOVED @@ -25,4 +26,14 @@ void igc_config_collision_dist(struct igc_hw *hw); s32 igc_get_speed_and_duplex_copper(struct igc_hw *hw, u16 *speed, u16 *duplex); +bool igc_enable_mng_pass_thru(struct igc_hw *hw); + +enum igc_mng_mode { + igc_mng_mode_none = 0, + igc_mng_mode_asf, + igc_mng_mode_pt, + igc_mng_mode_ipmi, + igc_mng_mode_host_if_only +}; + #endif diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 115fc2a544d7..14f324826604 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -78,6 +78,8 @@ static void igc_reset(struct igc_adapter *adapter) if (!netif_running(adapter->netdev)) igc_power_down_link(adapter); + + igc_get_phy_info(hw); } /** @@ -86,6 +88,12 @@ static void igc_reset(struct igc_adapter *adapter) */ static void igc_power_up_link(struct igc_adapter *adapter) { + igc_reset_phy(&adapter->hw); + + if (adapter->hw.phy.media_type == igc_media_type_copper) + igc_power_up_phy_copper(&adapter->hw); + + igc_setup_link(&adapter->hw); } /** @@ -94,6 +102,8 @@ static void igc_power_up_link(struct igc_adapter *adapter) */ static void igc_power_down_link(struct igc_adapter *adapter) { + if (adapter->hw.phy.media_type == igc_media_type_copper) + igc_power_down_phy_copper_base(&adapter->hw); } /** @@ -3377,6 +3387,7 @@ static int igc_probe(struct pci_dev *pdev, /* Copy the default MAC and PHY function pointers */ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); + memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); /* Initialize skew-specific constants */ err = ei->get_invariants(hw); diff --git a/drivers/net/ethernet/intel/igc/igc_phy.c b/drivers/net/ethernet/intel/igc/igc_phy.c new file mode 100644 index 000000000000..88583c1d4970 --- /dev/null +++ b/drivers/net/ethernet/intel/igc/igc_phy.c @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018 Intel Corporation */ + +#include "igc_phy.h" + +/** + * igc_check_reset_block - Check if PHY reset is blocked + * @hw: pointer to the HW structure + * + * Read the PHY management control register and check whether a PHY reset + * is blocked. If a reset is not blocked return 0, otherwise + * return IGC_ERR_BLK_PHY_RESET (12). + */ +s32 igc_check_reset_block(struct igc_hw *hw) +{ + u32 manc; + + manc = rd32(IGC_MANC); + + return (manc & IGC_MANC_BLK_PHY_RST_ON_IDE) ? + IGC_ERR_BLK_PHY_RESET : 0; +} + +/** + * igc_get_phy_id - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + */ +s32 igc_get_phy_id(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 phy_id; + + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + goto out; + + phy->id = (u32)(phy_id << 16); + usleep_range(200, 500); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + goto out; + + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + +out: + return ret_val; +} + +/** + * igc_phy_has_link - Polls PHY for link + * @hw: pointer to the HW structure + * @iterations: number of times to poll for link + * @usec_interval: delay between polling attempts + * @success: pointer to whether polling was successful or not + * + * Polls the PHY status register for link, 'iterations' number of times. + */ +s32 igc_phy_has_link(struct igc_hw *hw, u32 iterations, + u32 usec_interval, bool *success) +{ + u16 i, phy_status; + s32 ret_val = 0; + + for (i = 0; i < iterations; i++) { + /* Some PHYs require the PHY_STATUS register to be read + * twice due to the link bit being sticky. No harm doing + * it across the board. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val && usec_interval > 0) { + /* If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + if (usec_interval >= 1000) + mdelay(usec_interval / 1000); + else + udelay(usec_interval); + } + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_LINK_STATUS) + break; + if (usec_interval >= 1000) + mdelay(usec_interval / 1000); + else + udelay(usec_interval); + } + + *success = (i < iterations) ? true : false; + + return ret_val; +} + +/** + * igc_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, restore the link to previous settings. + */ +void igc_power_up_phy_copper(struct igc_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); +} + +/** + * igc_power_down_phy_copper - Power down copper PHY + * @hw: pointer to the HW structure + * + * Power down PHY to save power when interface is down and wake on lan + * is not enabled. + */ +void igc_power_down_phy_copper(struct igc_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + + /* Temporary workaround - should be removed when PHY will implement + * IEEE registers as properly + */ + /* hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);*/ + usleep_range(1000, 2000); +} + +/** + * igc_check_downshift - Checks whether a downshift in speed occurred + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns 1 + * + * A downshift is detected by querying the PHY link health. + */ +s32 igc_check_downshift(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + u16 phy_data, offset, mask; + s32 ret_val; + + switch (phy->type) { + case igc_phy_i225: + default: + /* speed downshift not supported */ + phy->speed_downgraded = false; + ret_val = 0; + goto out; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->speed_downgraded = (phy_data & mask) ? true : false; + +out: + return ret_val; +} + +/** + * igc_phy_hw_reset - PHY hardware reset + * @hw: pointer to the HW structure + * + * Verify the reset block is not blocking us from resetting. Acquire + * semaphore (if necessary) and read/set/write the device control reset + * bit in the PHY. Wait the appropriate delay time for the device to + * reset and release the semaphore (if necessary). + */ +s32 igc_phy_hw_reset(struct igc_hw *hw) +{ + struct igc_phy_info *phy = &hw->phy; + s32 ret_val; + u32 ctrl; + + ret_val = igc_check_reset_block(hw); + if (ret_val) { + ret_val = 0; + goto out; + } + + ret_val = phy->ops.acquire(hw); + if (ret_val) + goto out; + + ctrl = rd32(IGC_CTRL); + wr32(IGC_CTRL, ctrl | IGC_CTRL_PHY_RST); + wrfl(); + + udelay(phy->reset_delay_us); + + wr32(IGC_CTRL, ctrl); + wrfl(); + + usleep_range(1500, 2000); + + phy->ops.release(hw); + +out: + return ret_val; +} + +/** + * igc_read_phy_reg_mdic - Read MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + */ +static s32 igc_read_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 *data) +{ + struct igc_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + s32 ret_val = 0; + + if (offset > MAX_PHY_REG_ADDRESS) { + hw_dbg("PHY Address %d is out of range\n", offset); + ret_val = -IGC_ERR_PARAM; + goto out; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((offset << IGC_MDIC_REG_SHIFT) | + (phy->addr << IGC_MDIC_PHY_SHIFT) | + (IGC_MDIC_OP_READ)); + + wr32(IGC_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) { + usleep_range(500, 1000); + mdic = rd32(IGC_MDIC); + if (mdic & IGC_MDIC_READY) + break; + } + if (!(mdic & IGC_MDIC_READY)) { + hw_dbg("MDI Read did not complete\n"); + ret_val = -IGC_ERR_PHY; + goto out; + } + if (mdic & IGC_MDIC_ERROR) { + hw_dbg("MDI Error\n"); + ret_val = -IGC_ERR_PHY; + goto out; + } + *data = (u16)mdic; + +out: + return ret_val; +} + +/** + * igc_write_phy_reg_mdic - Write MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + */ +static s32 igc_write_phy_reg_mdic(struct igc_hw *hw, u32 offset, u16 data) +{ + struct igc_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + s32 ret_val = 0; + + if (offset > MAX_PHY_REG_ADDRESS) { + hw_dbg("PHY Address %d is out of range\n", offset); + ret_val = -IGC_ERR_PARAM; + goto out; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to write the desired data. + */ + mdic = (((u32)data) | + (offset << IGC_MDIC_REG_SHIFT) | + (phy->addr << IGC_MDIC_PHY_SHIFT) | + (IGC_MDIC_OP_WRITE)); + + wr32(IGC_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < IGC_GEN_POLL_TIMEOUT; i++) { + usleep_range(500, 1000); + mdic = rd32(IGC_MDIC); + if (mdic & IGC_MDIC_READY) + break; + } + if (!(mdic & IGC_MDIC_READY)) { + hw_dbg("MDI Write did not complete\n"); + ret_val = -IGC_ERR_PHY; + goto out; + } + if (mdic & IGC_MDIC_ERROR) { + hw_dbg("MDI Error\n"); + ret_val = -IGC_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * __igc_access_xmdio_reg - Read/write XMDIO register + * @hw: pointer to the HW structure + * @address: XMDIO address to program + * @dev_addr: device address to program + * @data: pointer to value to read/write from/to the XMDIO address + * @read: boolean flag to indicate read or write + */ +static s32 __igc_access_xmdio_reg(struct igc_hw *hw, u16 address, + u8 dev_addr, u16 *data, bool read) +{ + s32 ret_val; + + ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, dev_addr); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAAD, address); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, IGC_MMDAC_FUNC_DATA | + dev_addr); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, IGC_MMDAAD, data); + else + ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAAD, *data); + if (ret_val) + return ret_val; + + /* Recalibrate the device back to 0 */ + ret_val = hw->phy.ops.write_reg(hw, IGC_MMDAC, 0); + if (ret_val) + return ret_val; + + return ret_val; +} + +/** + * igc_read_xmdio_reg - Read XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be read from the EMI address + */ +static s32 igc_read_xmdio_reg(struct igc_hw *hw, u16 addr, + u8 dev_addr, u16 *data) +{ + return __igc_access_xmdio_reg(hw, addr, dev_addr, data, true); +} + +/** + * igc_write_xmdio_reg - Write XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be written to the XMDIO address + */ +static s32 igc_write_xmdio_reg(struct igc_hw *hw, u16 addr, + u8 dev_addr, u16 data) +{ + return __igc_access_xmdio_reg(hw, addr, dev_addr, &data, false); +} + +/** + * igc_write_phy_reg_gpy - Write GPY PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + */ +s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data) +{ + u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT; + s32 ret_val; + + offset = offset & GPY_REG_MASK; + + if (!dev_addr) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + ret_val = igc_write_phy_reg_mdic(hw, offset, data); + if (ret_val) + return ret_val; + hw->phy.ops.release(hw); + } else { + ret_val = igc_write_xmdio_reg(hw, (u16)offset, dev_addr, + data); + } + + return ret_val; +} + +/** + * igc_read_phy_reg_gpy - Read GPY PHY register + * @hw: pointer to the HW structure + * @offset: lower half is register offset to read to + * upper half is MMD to use. + * @data: data to read at register offset + * + * Acquires semaphore, if necessary, then reads the data in the PHY register + * at the offset. Release any acquired semaphores before exiting. + */ +s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data) +{ + u8 dev_addr = (offset & GPY_MMD_MASK) >> GPY_MMD_SHIFT; + s32 ret_val; + + offset = offset & GPY_REG_MASK; + + if (!dev_addr) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + ret_val = igc_read_phy_reg_mdic(hw, offset, data); + if (ret_val) + return ret_val; + hw->phy.ops.release(hw); + } else { + ret_val = igc_read_xmdio_reg(hw, (u16)offset, dev_addr, + data); + } + + return ret_val; +} diff --git a/drivers/net/ethernet/intel/igc/igc_phy.h b/drivers/net/ethernet/intel/igc/igc_phy.h new file mode 100644 index 000000000000..6a62f381559d --- /dev/null +++ b/drivers/net/ethernet/intel/igc/igc_phy.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018 Intel Corporation */ + +#ifndef _IGC_PHY_H_ +#define _IGC_PHY_H_ + +#include "igc_mac.h" + +s32 igc_check_reset_block(struct igc_hw *hw); +s32 igc_phy_hw_reset(struct igc_hw *hw); +s32 igc_get_phy_id(struct igc_hw *hw); +s32 igc_phy_has_link(struct igc_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 igc_check_downshift(struct igc_hw *hw); +void igc_power_up_phy_copper(struct igc_hw *hw); +void igc_power_down_phy_copper(struct igc_hw *hw); +s32 igc_write_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 data); +s32 igc_read_phy_reg_gpy(struct igc_hw *hw, u32 offset, u16 *data); + +#endif diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h index b5996e474c3c..a1bd3216c906 100644 --- a/drivers/net/ethernet/intel/igc/igc_regs.h +++ b/drivers/net/ethernet/intel/igc/igc_regs.h @@ -39,6 +39,9 @@ #define IGC_SWSM 0x05B50 /* SW Semaphore */ #define IGC_FWSM 0x05B54 /* FW Semaphore */ +/* Function Active and Power State to MNG */ +#define IGC_FACTPS 0x05B30 + /* Interrupt Register Description */ #define IGC_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ #define IGC_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ |