diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 137 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_hw.h | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb.h | 29 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_hwmon.c | 242 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 49 |
8 files changed, 469 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index e8912f1b8442..21353f0fef63 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -114,6 +114,17 @@ config IGB To compile this driver as a module, choose M here. The module will be called igb. +config IGB_HWMON + bool "Intel(R) PCI-Express Gigabit adapters HWMON support" + default y + depends on IGB && HWMON && !(IGB=y && HWMON=m) + ---help--- + Say Y if you want to expose thermal sensor data on Intel devices. + + Some of our devices contain thermal sensors, both external and internal. + This data is available via the hwmon sysfs interface and exposes + the onboard sensors. + config IGB_DCA bool "Direct Cache Access (DCA) Support" default y diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile index 624476cfa727..f9d37c809885 100644 --- a/drivers/net/ethernet/intel/igb/Makefile +++ b/drivers/net/ethernet/intel/igb/Makefile @@ -34,4 +34,4 @@ obj-$(CONFIG_IGB) += igb.o igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \ e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \ - e1000_i210.o igb_ptp.o + e1000_i210.o igb_ptp.o igb_hwmon.o diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 51e3f4f9b530..b6ec782156bb 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -2303,12 +2303,149 @@ out: return ret_val; } +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + */ +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + */ +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (rd32(E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (rd32(E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} + static struct e1000_mac_operations e1000_mac_ops_82575 = { .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, +#ifdef CONFIG_IGB_HWMON + .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic, + .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic, +#endif }; static struct e1000_phy_operations e1000_phy_ops_82575 = { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h index caf6abf9abef..444f6f521da7 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.h +++ b/drivers/net/ethernet/intel/igb/e1000_82575.h @@ -264,6 +264,8 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool); void igb_vmdq_set_replication_pf(struct e1000_hw *, bool); u16 igb_rxpbs_adjust_82580(u32 data); s32 igb_set_eee_i350(struct e1000_hw *); +s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *); +s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw); #define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 #define E1000_EMC_INTERNAL_DATA 0x00 diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h index 837a274b7461..2c9b6f40e21c 100644 --- a/drivers/net/ethernet/intel/igb/e1000_hw.h +++ b/drivers/net/ethernet/intel/igb/e1000_hw.h @@ -325,6 +325,10 @@ struct e1000_mac_operations { s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); void (*release_swfw_sync)(struct e1000_hw *, u16); +#ifdef CONFIG_IGB_HWMON + s32 (*get_thermal_sensor_data)(struct e1000_hw *); + s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); +#endif }; diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index 9f1af1b232d5..8372c002102c 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -308,6 +308,27 @@ struct igb_i2c_client_list { struct igb_i2c_client_list *next; }; +#ifdef CONFIG_IGB_HWMON + +#define IGB_HWMON_TYPE_LOC 0 +#define IGB_HWMON_TYPE_TEMP 1 +#define IGB_HWMON_TYPE_CAUTION 2 +#define IGB_HWMON_TYPE_MAX 3 + +struct hwmon_attr { + struct device_attribute dev_attr; + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor; + char name[12]; + }; + +struct hwmon_buff { + struct device *device; + struct hwmon_attr *hwmon_list; + unsigned int n_hwmon; + }; +#endif + /* board specific private data structure */ struct igb_adapter { unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; @@ -398,6 +419,10 @@ struct igb_adapter { struct timecounter tc; char fw_version[32]; +#ifdef CONFIG_IGB_HWMON + struct hwmon_buff igb_hwmon_buff; + bool ets; +#endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; struct igb_i2c_client_list *i2c_clients; @@ -476,6 +501,10 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector, extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); +#ifdef CONFIG_IGB_HWMON +extern void igb_sysfs_exit(struct igb_adapter *adapter); +extern int igb_sysfs_init(struct igb_adapter *adapter); +#endif static inline s32 igb_reset_phy(struct e1000_hw *hw) { if (hw->phy.ops.reset) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c new file mode 100644 index 000000000000..106bd7c29bc9 --- /dev/null +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -0,0 +1,242 @@ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2012 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "igb.h" +#include "e1000_82575.h" +#include "e1000_hw.h" + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/sysfs.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/hwmon.h> +#include <linux/pci.h> + +#ifdef CONFIG_IGB_HWMON +/* hwmon callback functions */ +static ssize_t igb_hwmon_show_location(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + return sprintf(buf, "loc%u\n", + igb_attr->sensor->location); +} + +static ssize_t igb_hwmon_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value; + + /* reset the temp field */ + igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw); + + value = igb_attr->sensor->temp; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_cautionthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->caution_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +static ssize_t igb_hwmon_show_maxopthresh(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr, + dev_attr); + unsigned int value = igb_attr->sensor->max_op_thresh; + + /* display millidegree */ + value *= 1000; + + return sprintf(buf, "%u\n", value); +} + +/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file. + * @ adapter: pointer to the adapter structure + * @ offset: offset in the eeprom sensor data table + * @ type: type of sensor data to display + * + * For each file we want in hwmon's sysfs interface we need a device_attribute + * This is included in our hwmon_attr struct that contains the references to + * the data structures we need to get the data to display. + */ +static int igb_add_hwmon_attr(struct igb_adapter *adapter, + unsigned int offset, int type) { + int rc; + unsigned int n_attr; + struct hwmon_attr *igb_attr; + + n_attr = adapter->igb_hwmon_buff.n_hwmon; + igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr]; + + switch (type) { + case IGB_HWMON_TYPE_LOC: + igb_attr->dev_attr.show = igb_hwmon_show_location; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_label", offset); + break; + case IGB_HWMON_TYPE_TEMP: + igb_attr->dev_attr.show = igb_hwmon_show_temp; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_input", offset); + break; + case IGB_HWMON_TYPE_CAUTION: + igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_max", offset); + break; + case IGB_HWMON_TYPE_MAX: + igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh; + snprintf(igb_attr->name, sizeof(igb_attr->name), + "temp%u_crit", offset); + break; + default: + rc = -EPERM; + return rc; + } + + /* These always the same regardless of type */ + igb_attr->sensor = + &adapter->hw.mac.thermal_sensor_data.sensor[offset]; + igb_attr->hw = &adapter->hw; + igb_attr->dev_attr.store = NULL; + igb_attr->dev_attr.attr.mode = S_IRUGO; + igb_attr->dev_attr.attr.name = igb_attr->name; + sysfs_attr_init(&igb_attr->dev_attr.attr); + rc = device_create_file(&adapter->pdev->dev, + &igb_attr->dev_attr); + if (rc == 0) + ++adapter->igb_hwmon_buff.n_hwmon; + + return rc; +} + +static void igb_sysfs_del_adapter(struct igb_adapter *adapter) +{ + int i; + + if (adapter == NULL) + return; + + for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) { + device_remove_file(&adapter->pdev->dev, + &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr); + } + + kfree(adapter->igb_hwmon_buff.hwmon_list); + + if (adapter->igb_hwmon_buff.device) + hwmon_device_unregister(adapter->igb_hwmon_buff.device); +} + +/* called from igb_main.c */ +void igb_sysfs_exit(struct igb_adapter *adapter) +{ + igb_sysfs_del_adapter(adapter); +} + +/* called from igb_main.c */ +int igb_sysfs_init(struct igb_adapter *adapter) +{ + struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff; + unsigned int i; + int n_attrs; + int rc = 0; + + /* If this method isn't defined we don't support thermals */ + if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) + goto exit; + + /* Don't create thermal hwmon interface if no sensors present */ + rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw)); + if (rc) + goto exit; + + /* Allocation space for max attributes + * max num sensors * values (loc, temp, max, caution) + */ + n_attrs = E1000_MAX_SENSORS * 4; + igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr), + GFP_KERNEL); + if (!igb_hwmon->hwmon_list) { + rc = -ENOMEM; + goto err; + } + + igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev); + if (IS_ERR(igb_hwmon->device)) { + rc = PTR_ERR(igb_hwmon->device); + goto err; + } + + for (i = 0; i < E1000_MAX_SENSORS; i++) { + + /* Only create hwmon sysfs entries for sensors that have + * meaningful data. + */ + if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0) + continue; + + /* Bail if any hwmon attr struct fails to initialize */ + rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP); + rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX); + if (rc) + goto err; + } + + goto exit; + +err: + igb_sysfs_del_adapter(adapter); +exit: + return rc; +} +#endif diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 0173b6118424..a9cb84a76e49 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1796,6 +1796,18 @@ void igb_reset(struct igb_adapter *adapter) igb_force_mac_fc(hw); igb_init_dmac(adapter, pba); +#ifdef CONFIG_IGB_HWMON + /* Re-initialize the thermal sensor on i350 devices. */ + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (mac->type == e1000_i350 && hw->bus.func == 0) { + /* If present, re-initialize the external thermal sensor + * interface. + */ + if (adapter->ets) + mac->ops.init_thermal_sensor_thresh(hw); + } + } +#endif if (!netif_running(adapter->netdev)) igb_power_down_link(adapter); @@ -2260,7 +2272,27 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } #endif +#ifdef CONFIG_IGB_HWMON + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350 && hw->bus.func == 0) { + u16 ets_word; + /* + * Read the NVM to determine if this i350 device supports an + * external thermal sensor. + */ + hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + if (igb_sysfs_init(adapter)) + dev_err(&pdev->dev, + "failed to allocate sysfs resources\n"); + } else { + adapter->ets = false; + } +#endif /* do hw tstamp init after resetting */ igb_ptp_init(adapter); @@ -2443,10 +2475,11 @@ static void igb_remove(struct pci_dev *pdev) struct e1000_hw *hw = &adapter->hw; pm_runtime_get_noresume(&pdev->dev); +#ifdef CONFIG_IGB_HWMON + igb_sysfs_exit(adapter); +#endif igb_remove_i2c(adapter); - igb_ptp_stop(adapter); - /* * The watchdog timer may be rescheduled, so explicitly * disable watchdog from being rescheduled. @@ -7594,7 +7627,12 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) } } - /* no client_list found, create a new one */ + /* no client_list found, create a new one as long as + * irqs are not disabled + */ + if (unlikely(irqs_disabled())) + goto exit; + client_list = kzalloc(sizeof(*client_list), GFP_KERNEL); if (client_list == NULL) goto exit; @@ -7606,7 +7644,8 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) client_info.platform_data = adapter; client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n"); + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); goto err_no_client; } @@ -7614,8 +7653,6 @@ igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) client_list->next = adapter->i2c_clients; adapter->i2c_clients = client_list; - spin_unlock_irqrestore(&i2c_clients_lock, flags); - client = client_list->client; goto exit; |