diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 97 |
1 files changed, 61 insertions, 36 deletions
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 5c0c26fd8363..f16ba7817f62 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -4557,58 +4557,84 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, an &= ~(MVPP2_GMAC_CONFIG_MII_SPEED | MVPP2_GMAC_CONFIG_GMII_SPEED | MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FC_ADV_EN | MVPP2_GMAC_FC_ADV_ASM_EN | MVPP2_GMAC_FLOW_CTRL_AUTONEG | - MVPP2_GMAC_CONFIG_FULL_DUPLEX | MVPP2_GMAC_AN_DUPLEX_EN | - MVPP2_GMAC_FORCE_LINK_DOWN); + MVPP2_GMAC_CONFIG_FULL_DUPLEX | MVPP2_GMAC_AN_DUPLEX_EN); ctrl0 &= ~MVPP2_GMAC_PORT_TYPE_MASK; - ctrl2 &= ~(MVPP2_GMAC_PORT_RESET_MASK | MVPP2_GMAC_PCS_ENABLE_MASK); + ctrl2 &= ~(MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PORT_RESET_MASK | + MVPP2_GMAC_PCS_ENABLE_MASK); + ctrl4 &= ~(MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN); + /* Configure port type */ if (phy_interface_mode_is_8023z(state->interface)) { - /* 1000BaseX and 2500BaseX ports cannot negotiate speed nor can - * they negotiate duplex: they are always operating with a fixed - * speed of 1000/2500Mbps in full duplex, so force 1000/2500 - * speed and full duplex here. - */ - ctrl0 |= MVPP2_GMAC_PORT_TYPE_MASK; - an |= MVPP2_GMAC_CONFIG_GMII_SPEED | - MVPP2_GMAC_CONFIG_FULL_DUPLEX; - } else if (!phy_interface_mode_is_rgmii(state->interface)) { - an |= MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FLOW_CTRL_AUTONEG; + ctrl2 |= MVPP2_GMAC_PCS_ENABLE_MASK; + ctrl4 &= ~MVPP22_CTRL4_EXT_PIN_GMII_SEL; + ctrl4 |= MVPP22_CTRL4_SYNC_BYPASS_DIS | + MVPP22_CTRL4_DP_CLK_SEL | + MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { + ctrl2 |= MVPP2_GMAC_PCS_ENABLE_MASK | MVPP2_GMAC_INBAND_AN_MASK; + ctrl4 &= ~MVPP22_CTRL4_EXT_PIN_GMII_SEL; + ctrl4 |= MVPP22_CTRL4_SYNC_BYPASS_DIS | + MVPP22_CTRL4_DP_CLK_SEL | + MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + } else if (phy_interface_mode_is_rgmii(state->interface)) { + ctrl4 &= ~MVPP22_CTRL4_DP_CLK_SEL; + ctrl4 |= MVPP22_CTRL4_EXT_PIN_GMII_SEL | + MVPP22_CTRL4_SYNC_BYPASS_DIS | + MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; } - if (state->duplex) - an |= MVPP2_GMAC_CONFIG_FULL_DUPLEX; + /* Configure advertisement bits */ if (phylink_test(state->advertising, Pause)) an |= MVPP2_GMAC_FC_ADV_EN; if (phylink_test(state->advertising, Asym_Pause)) an |= MVPP2_GMAC_FC_ADV_ASM_EN; - if (phy_interface_mode_is_8023z(state->interface) || - state->interface == PHY_INTERFACE_MODE_SGMII) { - an |= MVPP2_GMAC_IN_BAND_AUTONEG; - ctrl2 |= MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PCS_ENABLE_MASK; + /* Configure negotiation style */ + if (!phylink_autoneg_inband(mode)) { + /* Phy or fixed speed - no in-band AN */ + if (state->duplex) + an |= MVPP2_GMAC_CONFIG_FULL_DUPLEX; - ctrl4 &= ~(MVPP22_CTRL4_EXT_PIN_GMII_SEL | - MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN); - ctrl4 |= MVPP22_CTRL4_SYNC_BYPASS_DIS | - MVPP22_CTRL4_DP_CLK_SEL | - MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + if (state->speed == SPEED_1000 || state->speed == SPEED_2500) + an |= MVPP2_GMAC_CONFIG_GMII_SPEED; + else if (state->speed == SPEED_100) + an |= MVPP2_GMAC_CONFIG_MII_SPEED; if (state->pause & MLO_PAUSE_TX) ctrl4 |= MVPP22_CTRL4_TX_FC_EN; if (state->pause & MLO_PAUSE_RX) ctrl4 |= MVPP22_CTRL4_RX_FC_EN; - } else if (phy_interface_mode_is_rgmii(state->interface)) { - an |= MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS; + } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { + /* SGMII in-band mode receives the speed and duplex from + * the PHY. Flow control information is not received. */ + an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | MVPP2_GMAC_FORCE_LINK_PASS); + an |= MVPP2_GMAC_IN_BAND_AUTONEG | + MVPP2_GMAC_AN_SPEED_EN | + MVPP2_GMAC_AN_DUPLEX_EN; - if (state->speed == SPEED_1000) - an |= MVPP2_GMAC_CONFIG_GMII_SPEED; - else if (state->speed == SPEED_100) - an |= MVPP2_GMAC_CONFIG_MII_SPEED; + if (state->pause & MLO_PAUSE_TX) + ctrl4 |= MVPP22_CTRL4_TX_FC_EN; + if (state->pause & MLO_PAUSE_RX) + ctrl4 |= MVPP22_CTRL4_RX_FC_EN; + } else if (phy_interface_mode_is_8023z(state->interface)) { + /* 1000BaseX and 2500BaseX ports cannot negotiate speed nor can + * they negotiate duplex: they are always operating with a fixed + * speed of 1000/2500Mbps in full duplex, so force 1000/2500 + * speed and full duplex here. + */ + ctrl0 |= MVPP2_GMAC_PORT_TYPE_MASK; + an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | MVPP2_GMAC_FORCE_LINK_PASS); + an |= MVPP2_GMAC_CONFIG_GMII_SPEED | + MVPP2_GMAC_CONFIG_FULL_DUPLEX; - ctrl4 &= ~MVPP22_CTRL4_DP_CLK_SEL; - ctrl4 |= MVPP22_CTRL4_EXT_PIN_GMII_SEL | - MVPP22_CTRL4_SYNC_BYPASS_DIS | - MVPP22_CTRL4_QSGMII_BYPASS_ACTIVE; + if (state->pause & MLO_PAUSE_AN && state->an_enabled) { + an |= MVPP2_GMAC_FLOW_CTRL_AUTONEG; + } else { + if (state->pause & MLO_PAUSE_TX) + ctrl4 |= MVPP22_CTRL4_TX_FC_EN; + if (state->pause & MLO_PAUSE_RX) + ctrl4 |= MVPP22_CTRL4_RX_FC_EN; + } } writel(ctrl0, port->base + MVPP2_GMAC_CTRL_0_REG); @@ -4670,8 +4696,7 @@ static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode, interface != PHY_INTERFACE_MODE_10GKR) { val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); val &= ~MVPP2_GMAC_FORCE_LINK_DOWN; - if (phy_interface_mode_is_rgmii(interface)) - val |= MVPP2_GMAC_FORCE_LINK_PASS; + val |= MVPP2_GMAC_FORCE_LINK_PASS; writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); } |