diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 9280d96bb291..cc6a0b34ad75 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -4,6 +4,7 @@ * Copyright (c) 2015-2016 Ido Schimmel <idosch@mellanox.com> * Copyright (c) 2015 Elad Raz <eladr@mellanox.com> * Copyright (c) 2015-2016 Jiri Pirko <jiri@mellanox.com> + * Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -3884,6 +3885,144 @@ mlxsw_reg_ralue_act_ip2me_pack(char *payload) MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); } +/* RAUHT - Router Algorithmic LPM Unicast Host Table Register + * ---------------------------------------------------------- + * The RAUHT register is used to configure and query the Unicast Host table in + * devices that implement the Algorithmic LPM. + */ +#define MLXSW_REG_RAUHT_ID 0x8014 +#define MLXSW_REG_RAUHT_LEN 0x74 + +static const struct mlxsw_reg_info mlxsw_reg_rauht = { + .id = MLXSW_REG_RAUHT_ID, + .len = MLXSW_REG_RAUHT_LEN, +}; + +enum mlxsw_reg_rauht_type { + MLXSW_REG_RAUHT_TYPE_IPV4, + MLXSW_REG_RAUHT_TYPE_IPV6, +}; + +/* reg_rauht_type + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2); + +enum mlxsw_reg_rauht_op { + MLXSW_REG_RAUHT_OP_QUERY_READ = 0, + /* Read operation */ + MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1, + /* Clear on read operation. Used to read entry and clear + * activity bit. + */ + MLXSW_REG_RAUHT_OP_WRITE_ADD = 0, + /* Add. Used to write a new entry to the table. All R/W fields are + * relevant for new entry. Activity bit is set for new entries. + */ + MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1, + /* Update action. Used to update an existing route entry and + * only update the following fields: + * trap_action, trap_id, mac, counter_set_type, counter_index + */ + MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2, + /* Clear activity. A bit is cleared for the entry. */ + MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3, + /* Delete entry */ + MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4, + /* Delete all host entries on a RIF. In this command, dip + * field is reserved. + */ +}; + +/* reg_rauht_op + * Access: OP + */ +MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3); + +/* reg_rauht_a + * Activity. Set for new entries. Set if a packet lookup has hit on + * the specific entry. + * To clear the a bit, use "clear activity" op. + * Enabled by activity_dis in RGCR + * Access: RO + */ +MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1); + +/* reg_rauht_rif + * Router Interface + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16); + +/* reg_rauht_dip* + * Destination address. + * Access: Index + */ +MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32); + +enum mlxsw_reg_rauht_trap_action { + MLXSW_REG_RAUHT_TRAP_ACTION_NOP, + MLXSW_REG_RAUHT_TRAP_ACTION_TRAP, + MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR, + MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS, +}; + +/* reg_rauht_trap_action + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4); + +enum mlxsw_reg_rauht_trap_id { + MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0, + MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1, +}; + +/* reg_rauht_trap_id + * Trap ID to be reported to CPU. + * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR, + * trap_id is reserved. + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9); + +/* reg_rauht_counter_set_type + * Counter set type for flow counters + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8); + +/* reg_rauht_counter_index + * Counter index for flow counters + * Access: RW + */ +MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24); + +/* reg_rauht_mac + * MAC address. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6); + +static inline void mlxsw_reg_rauht_pack(char *payload, + enum mlxsw_reg_rauht_op op, u16 rif, + const char *mac) +{ + MLXSW_REG_ZERO(rauht, payload); + mlxsw_reg_rauht_op_set(payload, op); + mlxsw_reg_rauht_rif_set(payload, rif); + mlxsw_reg_rauht_mac_memcpy_to(payload, mac); +} + +static inline void mlxsw_reg_rauht_pack4(char *payload, + enum mlxsw_reg_rauht_op op, u16 rif, + const char *mac, u32 dip) +{ + mlxsw_reg_rauht_pack(payload, op, rif, mac); + mlxsw_reg_rauht_dip4_set(payload, dip); +} + /* MFCR - Management Fan Control Register * -------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. @@ -4634,6 +4773,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "RALTB"; case MLXSW_REG_RALUE_ID: return "RALUE"; + case MLXSW_REG_RAUHT_ID: + return "RAUHT"; case MLXSW_REG_MFCR_ID: return "MFCR"; case MLXSW_REG_MFSC_ID: |