aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/xilinx/xilinx_emaclite.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_emaclite.c')
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_emaclite.c112
1 files changed, 64 insertions, 48 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 2a0c06e0f730..42f1f518dad6 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -70,7 +70,8 @@
#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */
#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit
* only. This is not documented
- * in the HW spec */
+ * in the HW spec
+ */
/* Define for programming the MAC address into the EmacLite */
#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
@@ -94,11 +95,11 @@
-#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
+#define TX_TIMEOUT (60 * HZ) /* Tx timeout is 60 seconds. */
#define ALIGNMENT 4
/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
-#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32)adr)) % ALIGNMENT)
#ifdef __BIG_ENDIAN
#define xemaclite_readl ioread32be
@@ -238,8 +239,8 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
/* Set up to output the remaining data */
align_buffer = 0;
- to_u8_ptr = (u8 *) &align_buffer;
- from_u8_ptr = (u8 *) from_u16_ptr;
+ to_u8_ptr = (u8 *)&align_buffer;
+ from_u8_ptr = (u8 *)from_u16_ptr;
/* Output the remaining data */
for (; length > 0; length--)
@@ -272,7 +273,7 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u32 align_buffer;
from_u32_ptr = src_ptr;
- to_u16_ptr = (u16 *) dest_ptr;
+ to_u16_ptr = (u16 *)dest_ptr;
for (; length > 3; length -= 4) {
/* Copy each word into the temporary buffer */
@@ -288,9 +289,9 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
u8 *to_u8_ptr, *from_u8_ptr;
/* Set up to read the remaining data */
- to_u8_ptr = (u8 *) to_u16_ptr;
+ to_u8_ptr = (u8 *)to_u16_ptr;
align_buffer = *from_u32_ptr++;
- from_u8_ptr = (u8 *) &align_buffer;
+ from_u8_ptr = (u8 *)&align_buffer;
/* Read the remaining data */
for (; length > 0; length--)
@@ -336,7 +337,8 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
} else if (drvdata->tx_ping_pong != 0) {
/* If the expected buffer is full, try the other buffer,
- * if it is configured in HW */
+ * if it is configured in HW
+ */
addr = (void __iomem __force *)((u32 __force)addr ^
XEL_BUFFER_OFFSET);
@@ -349,7 +351,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
return -1; /* Buffer was full, return failure */
/* Write the frame to the buffer */
- xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+ xemaclite_aligned_write(data, (u32 __force *)addr, byte_count);
xemaclite_writel((byte_count & XEL_TPLR_LENGTH_MASK),
addr + XEL_TPLR_OFFSET);
@@ -357,7 +359,8 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
/* Update the Tx Status Register to indicate that there is a
* frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
* is used by the interrupt handler to check whether a frame
- * has been transmitted */
+ * has been transmitted
+ */
reg_data = xemaclite_readl(addr + XEL_TSR_OFFSET);
reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
xemaclite_writel(reg_data, addr + XEL_TSR_OFFSET);
@@ -369,6 +372,7 @@ static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
* xemaclite_recv_data - Receive a frame
* @drvdata: Pointer to the Emaclite device private data
* @data: Address where the data is to be received
+ * @maxlen: Maximum supported ethernet packet length
*
* This function is intended to be called from the interrupt context or
* with a wrapper which waits for the receive frame to be available.
@@ -394,7 +398,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
/* The instance is out of sync, try other buffer if other
* buffer is configured, return 0 otherwise. If the instance is
* out of sync, do not update the 'next_rx_buf_to_use' since it
- * will correct on subsequent calls */
+ * will correct on subsequent calls
+ */
if (drvdata->rx_ping_pong != 0)
addr = (void __iomem __force *)((u32 __force)addr ^
XEL_BUFFER_OFFSET);
@@ -408,13 +413,15 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
return 0; /* No data was available */
}
- /* Get the protocol type of the ethernet frame that arrived */
+ /* Get the protocol type of the ethernet frame that arrived
+ */
proto_type = ((ntohl(xemaclite_readl(addr + XEL_HEADER_OFFSET +
XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
XEL_RPLR_LENGTH_MASK);
/* Check if received ethernet frame is a raw ethernet frame
- * or an IP packet or an ARP packet */
+ * or an IP packet or an ARP packet
+ */
if (proto_type > ETH_DATA_LEN) {
if (proto_type == ETH_P_IP) {
@@ -430,7 +437,8 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
else
/* Field contains type other than IP or ARP, use max
- * frame size and let user parse it */
+ * frame size and let user parse it
+ */
length = ETH_FRAME_LEN + ETH_FCS_LEN;
} else
/* Use the length in the frame, plus the header and trailer */
@@ -440,7 +448,7 @@ static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
length = maxlen;
/* Read from the EmacLite device */
- xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+ xemaclite_aligned_read((u32 __force *)(addr + XEL_RXBUFF_OFFSET),
data, length);
/* Acknowledge the frame */
@@ -471,7 +479,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
/* Determine the expected Tx buffer address */
addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
- xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+ xemaclite_aligned_write(address_ptr, (u32 __force *)addr, ETH_ALEN);
xemaclite_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);
@@ -488,7 +496,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
/**
* xemaclite_set_mac_address - Set the MAC address for this device
* @dev: Pointer to the network device instance
- * @addr: Void pointer to the sockaddr structure
+ * @address: Void pointer to the sockaddr structure
*
* This function copies the HW address from the sockaddr strucutre to the
* net_device structure and updates the address in HW.
@@ -564,19 +572,19 @@ static void xemaclite_tx_handler(struct net_device *dev)
struct net_local *lp = netdev_priv(dev);
dev->stats.tx_packets++;
- if (lp->deferred_skb) {
- if (xemaclite_send_data(lp,
- (u8 *) lp->deferred_skb->data,
- lp->deferred_skb->len) != 0)
- return;
- else {
- dev->stats.tx_bytes += lp->deferred_skb->len;
- dev_kfree_skb_irq(lp->deferred_skb);
- lp->deferred_skb = NULL;
- netif_trans_update(dev); /* prevent tx timeout */
- netif_wake_queue(dev);
- }
- }
+
+ if (!lp->deferred_skb)
+ return;
+
+ if (xemaclite_send_data(lp, (u8 *)lp->deferred_skb->data,
+ lp->deferred_skb->len))
+ return;
+
+ dev->stats.tx_bytes += lp->deferred_skb->len;
+ dev_kfree_skb_irq(lp->deferred_skb);
+ lp->deferred_skb = NULL;
+ netif_trans_update(dev); /* prevent tx timeout */
+ netif_wake_queue(dev);
}
/**
@@ -602,18 +610,18 @@ static void xemaclite_rx_handler(struct net_device *dev)
return;
}
- /*
- * A new skb should have the data halfword aligned, but this code is
+ /* A new skb should have the data halfword aligned, but this code is
* here just in case that isn't true. Calculate how many
* bytes we should reserve to get the data to start on a word
- * boundary */
+ * boundary
+ */
align = BUFFER_ALIGN(skb->data);
if (align)
skb_reserve(skb, align);
skb_reserve(skb, 2);
- len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
+ len = xemaclite_recv_data(lp, (u8 *)skb->data, len);
if (!len) {
dev->stats.rx_errors++;
@@ -639,6 +647,8 @@ static void xemaclite_rx_handler(struct net_device *dev)
* @dev_id: Void pointer to the network device instance used as callback
* reference
*
+ * Return: IRQ_HANDLED
+ *
* This function handles the Tx and Rx interrupts of the EmacLite device.
*/
static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
@@ -706,8 +716,8 @@ static int xemaclite_mdio_wait(struct net_local *lp)
unsigned long end = jiffies + 2;
/* wait for the MDIO interface to not be busy or timeout
- after some time.
- */
+ * after some time.
+ */
while (xemaclite_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
XEL_MDIOCTRL_MDIOSTS_MASK) {
if (time_before_eq(end, jiffies)) {
@@ -757,7 +767,7 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
rc = xemaclite_readl(lp->base_addr + XEL_MDIORD_OFFSET);
dev_dbg(&lp->ndev->dev,
- "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
+ "%s(phy_id=%i, reg=%x) == %x\n", __func__,
phy_id, reg, rc);
return rc;
@@ -772,6 +782,8 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
*
* This function waits till the device is ready to accept a new MDIO
* request and then writes the val to the MDIO Write Data register.
+ *
+ * Return: 0 upon success or a negative error upon failure
*/
static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
u16 val)
@@ -780,7 +792,7 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
u32 ctrl_reg;
dev_dbg(&lp->ndev->dev,
- "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+ "%s(phy_id=%i, reg=%x, val=%x)\n", __func__,
phy_id, reg, val);
if (xemaclite_mdio_wait(lp))
@@ -805,7 +817,7 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
/**
* xemaclite_mdio_setup - Register mii_bus for the Emaclite device
* @lp: Pointer to the Emaclite device private data
- * @ofdev: Pointer to OF device structure
+ * @dev: Pointer to OF device structure
*
* This function enables MDIO bus in the Emaclite device and registers a
* mii_bus.
@@ -905,6 +917,9 @@ static void xemaclite_adjust_link(struct net_device *ndev)
* This function sets the MAC address, requests an IRQ and enables interrupts
* for the Emaclite device and starts the Tx queue.
* It also connects to the phy device, if MDIO is included in Emaclite device.
+ *
+ * Return: 0 on success. -ENODEV, if PHY cannot be connected.
+ * Non-zero error value on failure.
*/
static int xemaclite_open(struct net_device *dev)
{
@@ -975,6 +990,8 @@ static int xemaclite_open(struct net_device *dev)
* This function stops the Tx queue, disables interrupts and frees the IRQ for
* the Emaclite device.
* It also disconnects the phy device associated with the Emaclite device.
+ *
+ * Return: 0, always.
*/
static int xemaclite_close(struct net_device *dev)
{
@@ -1017,10 +1034,11 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
new_skb = orig_skb;
spin_lock_irqsave(&lp->reset_lock, flags);
- if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+ if (xemaclite_send_data(lp, (u8 *)new_skb->data, len) != 0) {
/* If the Emaclite Tx buffer is busy, stop the Tx queue and
* defer the skb for transmission during the ISR, after the
- * current transmission is complete */
+ * current transmission is complete
+ */
netif_stop_queue(dev);
lp->deferred_skb = new_skb;
/* Take the time stamp now, since we can't do this in an ISR. */
@@ -1052,13 +1070,12 @@ static bool get_bool(struct platform_device *ofdev, const char *s)
{
u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
- if (p) {
- return (bool)*p;
- } else {
- dev_warn(&ofdev->dev, "Parameter %s not found,"
- "defaulting to false\n", s);
+ if (!p) {
+ dev_warn(&ofdev->dev, "Parameter %s not found, defaulting to false\n", s);
return false;
}
+
+ return (bool)*p;
}
static const struct net_device_ops xemaclite_netdev_ops;
@@ -1066,7 +1083,6 @@ static const struct net_device_ops xemaclite_netdev_ops;
/**
* xemaclite_of_probe - Probe method for the Emaclite device.
* @ofdev: Pointer to OF device structure
- * @match: Pointer to the structure used for matching a device
*
* This function probes for the Emaclite device in the device tree.
* It initializes the driver data structure and the hardware, sets the MAC
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.