1 files changed, 494 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
new file mode 100644
index 000000000000..8002931ae823
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -0,0 +1,494 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2007 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  Linux NICS <linux.nics@intel.com>
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
+static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 phy_data);
+
+/**
+ *  ixgbe_identify_phy - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 phy_addr;
+
+	for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+		if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+			hw->phy.addr = phy_addr;
+			ixgbe_get_phy_id(hw);
+			hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
+			status = 0;
+			break;
+		}
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_validate_phy_addr - Determines phy address is valid
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+	u16 phy_id = 0;
+	bool valid = false;
+
+	hw->phy.addr = phy_addr;
+	ixgbe_read_phy_reg(hw,
+			   IXGBE_MDIO_PHY_ID_HIGH,
+			   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+			   &phy_id);
+
+	if (phy_id != 0xFFFF && phy_id != 0x0)
+		valid = true;
+
+	return valid;
+}
+
+/**
+ *  ixgbe_get_phy_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+
+	status = ixgbe_read_phy_reg(hw,
+				   IXGBE_MDIO_PHY_ID_HIGH,
+				   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				   &phy_id_high);
+
+	if (status == 0) {
+		hw->phy.id = (u32)(phy_id_high << 16);
+		status = ixgbe_read_phy_reg(hw,
+					   IXGBE_MDIO_PHY_ID_LOW,
+					   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					   &phy_id_low);
+		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_type_from_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+	enum ixgbe_phy_type phy_type;
+
+	switch (phy_id) {
+	case TN1010_PHY_ID:
+		phy_type = ixgbe_phy_tn;
+		break;
+	case QT2022_PHY_ID:
+		phy_type = ixgbe_phy_qt;
+		break;
+	default:
+		phy_type = ixgbe_phy_unknown;
+		break;
+	}
+
+	return phy_type;
+}
+
+/**
+ *  ixgbe_reset_phy - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+	/*
+	 * Perform soft PHY reset to the PHY_XS.
+	 * This will cause a soft reset to the PHY
+	 */
+	return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+				   IXGBE_MDIO_PHY_XS_DEV_TYPE,
+				   IXGBE_MDIO_PHY_XS_RESET);
+}
+
+/**
+ *  ixgbe_read_phy_reg - Reads a value from a specified PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+		       u32 device_type, u16 *phy_data)
+{
+	u32 command;
+	u32 i;
+	u32 timeout = 10;
+	u32 data;
+	s32 status = 0;
+	u16 gssr;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == 0) {
+		/* Setup and write the address cycle command */
+		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+			   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+			   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+		/*
+		 * Check every 10 usec to see if the address cycle completed.
+		 * The MDI Command bit will clear when the operation is
+		 * complete
+		 */
+		for (i = 0; i < timeout; i++) {
+			udelay(10);
+
+			command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+				break;
+		}
+
+		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+			hw_dbg(hw, "PHY address command did not complete.\n");
+			status = IXGBE_ERR_PHY;
+		}
+
+		if (status == 0) {
+			/*
+			 * Address cycle complete, setup and write the read
+			 * command
+			 */
+			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+				   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+				   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+				   (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+			/*
+			 * Check every 10 usec to see if the address cycle
+			 * completed. The MDI Command bit will clear when the
+			 * operation is complete
+			 */
+			for (i = 0; i < timeout; i++) {
+				udelay(10);
+
+				command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+					break;
+			}
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+				hw_dbg(hw,
+				       "PHY read command didn't complete\n");
+				status = IXGBE_ERR_PHY;
+			} else {
+				/*
+				 * Read operation is complete.  Get the data
+				 * from MSRWD
+				 */
+				data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+				data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+				*phy_data = (u16)(data);
+			}
+		}
+
+		ixgbe_release_swfw_sync(hw, gssr);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_write_phy_reg - Writes a value to specified PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 phy_data)
+{
+	u32 command;
+	u32 i;
+	u32 timeout = 10;
+	s32 status = 0;
+	u16 gssr;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == 0) {
+		/* Put the data in the MDI single read and write data register*/
+		IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+		/* Setup and write the address cycle command */
+		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+			   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+			   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+		/*
+		 * Check every 10 usec to see if the address cycle completed.
+		 * The MDI Command bit will clear when the operation is
+		 * complete
+		 */
+		for (i = 0; i < timeout; i++) {
+			udelay(10);
+
+			command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+				hw_dbg(hw, "PHY address cmd didn't complete\n");
+				break;
+			}
+		}
+
+		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+			status = IXGBE_ERR_PHY;
+
+		if (status == 0) {
+			/*
+			 * Address cycle complete, setup and write the write
+			 * command
+			 */
+			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+				   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+				   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+				   (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+			/*
+			 * Check every 10 usec to see if the address cycle
+			 * completed. The MDI Command bit will clear when the
+			 * operation is complete
+			 */
+			for (i = 0; i < timeout; i++) {
+				udelay(10);
+
+				command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+					hw_dbg(hw, "PHY write command did not "
+						  "complete.\n");
+					break;
+				}
+			}
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+				status = IXGBE_ERR_PHY;
+		}
+
+		ixgbe_release_swfw_sync(hw, gssr);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_tnx_phy_link - Set and restart autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_NOT_IMPLEMENTED;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 autoneg_speed_selection_register = 0x10;
+	u16 autoneg_restart_mask = 0x0200;
+	u16 autoneg_complete_mask = 0x0020;
+	u16 autoneg_reg = 0;
+
+	/*
+	 * Set advertisement settings in PHY based on autoneg_advertised
+	 * settings. If autoneg_advertised = 0, then advertise default values
+	 * txn devices cannot be "forced" to a autoneg 10G and fail.  But can
+	 * for a 1G.
+	 */
+	ixgbe_read_phy_reg(hw,
+		  autoneg_speed_selection_register,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  &autoneg_reg);
+
+	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
+		autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
+	else
+		autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
+
+	ixgbe_write_phy_reg(hw,
+		  autoneg_speed_selection_register,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  autoneg_reg);
+
+
+	/* Restart PHY autonegotiation and wait for completion */
+	ixgbe_read_phy_reg(hw,
+		  IXGBE_MDIO_AUTO_NEG_CONTROL,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  &autoneg_reg);
+
+	autoneg_reg |= autoneg_restart_mask;
+
+	ixgbe_write_phy_reg(hw,
+		  IXGBE_MDIO_AUTO_NEG_CONTROL,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  autoneg_reg);
+
+	/* Wait for autonegotiation to finish */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		udelay(10);
+		/* Restart PHY autonegotiation and wait for completion */
+		status = ixgbe_read_phy_reg(hw,
+					    IXGBE_MDIO_AUTO_NEG_STATUS,
+					    IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+					    &autoneg_reg);
+
+		autoneg_reg &= autoneg_complete_mask;
+		if (autoneg_reg == autoneg_complete_mask) {
+			status = 0;
+			break;
+		}
+	}
+
+	if (time_out == max_time_out)
+		status = IXGBE_ERR_LINK_SETUP;
+
+	return status;
+}
+
+/**
+ *  ixgbe_check_tnx_phy_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
+			     bool *link_up)
+{
+	s32 status = 0;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 phy_link = 0;
+	u16 phy_speed = 0;
+	u16 phy_data = 0;
+
+	/* Initialize speed and link to default case */
+	*link_up = false;
+	*speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		udelay(10);
+		if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+			*link_up = true;
+			if (phy_speed ==
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+				*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		} else {
+			status = ixgbe_read_phy_reg(hw,
+				     IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+				     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				     &phy_data);
+			phy_link = phy_data &
+				IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+			phy_speed = phy_data &
+				IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ **/
+s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
+				   bool autoneg,
+				   bool autoneg_wait_to_complete)
+{
+	/*
+	 * Clear autoneg_advertised and set new values based on input link
+	 * speed.
+	 */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	/* Setup link based on the new speed settings */
+	ixgbe_setup_tnx_phy_link(hw);
+
+	return 0;
+}