diff options
Diffstat (limited to 'drivers/net/phy/marvell10g.c')
| -rw-r--r-- | drivers/net/phy/marvell10g.c | 28 |
1 files changed, 26 insertions, 2 deletions
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 100b401b1f4a..3b99882692e3 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -31,6 +31,9 @@ #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) enum { + MV_PMA_BOOT = 0xc050, + MV_PMA_BOOT_FATAL = BIT(0), + MV_PCS_BASE_T = 0x0000, MV_PCS_BASE_R = 0x1000, MV_PCS_1000BASEX = 0x2000, @@ -48,6 +51,8 @@ enum { MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */ /* Vendor2 MMD registers */ + MV_V2_PORT_CTRL = 0xf001, + MV_V2_PORT_CTRL_PWRDOWN = 0x0800, MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000, MV_V2_TEMP_CTRL_SAMPLE = 0x0000, @@ -211,6 +216,16 @@ static int mv3310_probe(struct phy_device *phydev) (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT); + if (ret < 0) + return ret; + + if (ret & MV_PMA_BOOT_FATAL) { + dev_warn(&phydev->mdio.dev, + "PHY failed to boot firmware, status=%04x\n", ret); + return -ENODEV; + } + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -226,11 +241,19 @@ static int mv3310_probe(struct phy_device *phydev) static int mv3310_suspend(struct phy_device *phydev) { - return 0; + return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, + MV_V2_PORT_CTRL_PWRDOWN); } static int mv3310_resume(struct phy_device *phydev) { + int ret; + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, + MV_V2_PORT_CTRL_PWRDOWN); + if (ret) + return ret; + return mv3310_hwmon_config(phydev, true); } @@ -472,8 +495,9 @@ static struct phy_driver mv3310_drivers[] = { .phy_id = MARVELL_PHY_ID_88E2110, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88x2110", - .get_features = genphy_c45_pma_read_abilities, .probe = mv3310_probe, + .suspend = mv3310_suspend, + .resume = mv3310_resume, .soft_reset = genphy_no_soft_reset, .config_init = mv3310_config_init, .config_aneg = mv3310_config_aneg, |