diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 128 |
1 files changed, 123 insertions, 5 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 3a4d83fa52dc..3fe552675dd2 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -19,6 +19,7 @@ * ksz9477 */ +#include <linux/bitfield.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/phy.h> @@ -490,9 +491,50 @@ static int ksz9021_config_init(struct phy_device *phydev) /* MMD Address 0x2 */ #define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 +#define MII_KSZ9031RN_RX_CTL_M GENMASK(7, 4) +#define MII_KSZ9031RN_TX_CTL_M GENMASK(3, 0) + #define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 +#define MII_KSZ9031RN_RXD3 GENMASK(15, 12) +#define MII_KSZ9031RN_RXD2 GENMASK(11, 8) +#define MII_KSZ9031RN_RXD1 GENMASK(7, 4) +#define MII_KSZ9031RN_RXD0 GENMASK(3, 0) + #define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 +#define MII_KSZ9031RN_TXD3 GENMASK(15, 12) +#define MII_KSZ9031RN_TXD2 GENMASK(11, 8) +#define MII_KSZ9031RN_TXD1 GENMASK(7, 4) +#define MII_KSZ9031RN_TXD0 GENMASK(3, 0) + #define MII_KSZ9031RN_CLK_PAD_SKEW 8 +#define MII_KSZ9031RN_GTX_CLK GENMASK(9, 5) +#define MII_KSZ9031RN_RX_CLK GENMASK(4, 0) + +/* KSZ9031 has internal RGMII_IDRX = 1.2ns and RGMII_IDTX = 0ns. To + * provide different RGMII options we need to configure delay offset + * for each pad relative to build in delay. + */ +/* keep rx as "No delay adjustment" and set rx_clk to +0.60ns to get delays of + * 1.80ns + */ +#define RX_ID 0x7 +#define RX_CLK_ID 0x19 + +/* set rx to +0.30ns and rx_clk to -0.90ns to compensate the + * internal 1.2ns delay. + */ +#define RX_ND 0xc +#define RX_CLK_ND 0x0 + +/* set tx to -0.42ns and tx_clk to +0.96ns to get 1.38ns delay */ +#define TX_ID 0x0 +#define TX_CLK_ID 0x1f + +/* set tx and tx_clk to "No delay adjustment" to keep 0ns + * dealy + */ +#define TX_ND 0x7 +#define TX_CLK_ND 0xf /* MMD Address 0x1C */ #define MII_KSZ9031RN_EDPD 0x23 @@ -501,7 +543,8 @@ static int ksz9021_config_init(struct phy_device *phydev) static int ksz9031_of_load_skew_values(struct phy_device *phydev, const struct device_node *of_node, u16 reg, size_t field_sz, - const char *field[], u8 numfields) + const char *field[], u8 numfields, + bool *update) { int val[4] = {-1, -2, -3, -4}; int matches = 0; @@ -517,6 +560,8 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev, if (!matches) return 0; + *update |= true; + if (matches < numfields) newval = phy_read_mmd(phydev, 2, reg); else @@ -565,6 +610,67 @@ static int ksz9031_enable_edpd(struct phy_device *phydev) reg | MII_KSZ9031RN_EDPD_ENABLE); } +static int ksz9031_config_rgmii_delay(struct phy_device *phydev) +{ + u16 rx, tx, rx_clk, tx_clk; + int ret; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + tx = TX_ND; + tx_clk = TX_CLK_ND; + rx = RX_ND; + rx_clk = RX_CLK_ND; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + tx = TX_ID; + tx_clk = TX_CLK_ID; + rx = RX_ID; + rx_clk = RX_CLK_ID; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + tx = TX_ND; + tx_clk = TX_CLK_ND; + rx = RX_ID; + rx_clk = RX_CLK_ID; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + tx = TX_ID; + tx_clk = TX_CLK_ID; + rx = RX_ND; + rx_clk = RX_CLK_ND; + break; + default: + return 0; + } + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_CONTROL_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_RX_CTL_M, rx) | + FIELD_PREP(MII_KSZ9031RN_TX_CTL_M, tx)); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_RX_DATA_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_RXD3, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD2, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD1, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD0, rx)); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_TX_DATA_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_TXD3, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD2, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD1, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD0, tx)); + if (ret < 0) + return ret; + + return phy_write_mmd(phydev, 2, MII_KSZ9031RN_CLK_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_GTX_CLK, tx_clk) | + FIELD_PREP(MII_KSZ9031RN_RX_CLK, rx_clk)); +} + static int ksz9031_config_init(struct phy_device *phydev) { const struct device *dev = &phydev->mdio.dev; @@ -597,21 +703,33 @@ static int ksz9031_config_init(struct phy_device *phydev) } while (!of_node && dev_walker); if (of_node) { + bool update = false; + + if (phy_interface_is_rgmii(phydev)) { + result = ksz9031_config_rgmii_delay(phydev); + if (result < 0) + return result; + } + ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_CLK_PAD_SKEW, 5, - clk_skews, 2); + clk_skews, 2, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_CONTROL_PAD_SKEW, 4, - control_skews, 2); + control_skews, 2, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4, - rx_data_skews, 4); + rx_data_skews, 4, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, - tx_data_skews, 4); + tx_data_skews, 4, &update); + + if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII) + phydev_warn(phydev, + "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n"); /* Silicon Errata Sheet (DS80000691D or DS80000692D): * When the device links in the 1000BASE-T slave mode only, |