diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
-rw-r--r-- | drivers/net/phy/phy_device.c | 98 |
1 files changed, 59 insertions, 39 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 74d8e1dc125f..57849ac0384e 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -26,6 +26,7 @@ #include <linux/netdevice.h> #include <linux/phy.h> #include <linux/phy_led_triggers.h> +#include <linux/pse-pd/pse.h> #include <linux/property.h> #include <linux/sfp.h> #include <linux/skbuff.h> @@ -90,8 +91,9 @@ const int phy_10_100_features_array[4] = { }; EXPORT_SYMBOL_GPL(phy_10_100_features_array); -const int phy_basic_t1_features_array[2] = { +const int phy_basic_t1_features_array[3] = { ETHTOOL_LINK_MODE_TP_BIT, + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, ETHTOOL_LINK_MODE_100baseT1_Full_BIT, }; EXPORT_SYMBOL_GPL(phy_basic_t1_features_array); @@ -277,6 +279,15 @@ static __maybe_unused int mdio_bus_phy_suspend(struct device *dev) if (phydev->mac_managed_pm) return 0; + /* Wakeup interrupts may occur during the system sleep transition when + * the PHY is inaccessible. Set flag to postpone handling until the PHY + * has resumed. Wait for concurrent interrupt handler to complete. + */ + if (phy_interrupt_is_valid(phydev)) { + phydev->irq_suspended = 1; + synchronize_irq(phydev->irq); + } + /* We must stop the state machine manually, otherwise it stops out of * control, possibly with the phydev->lock held. Upon resume, netdev * may call phy routines that try to grab the same lock, and that may @@ -306,6 +317,14 @@ static __maybe_unused int mdio_bus_phy_resume(struct device *dev) phydev->suspended_by_mdio_bus = 0; + /* If we managed to get here with the PHY state machine in a state + * neither PHY_HALTED, PHY_READY nor PHY_UP, this is an indication + * that something went wrong and we should most likely be using + * MAC managed PM, but we are not. + */ + WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && + phydev->state != PHY_UP); + ret = phy_init_hw(phydev); if (ret < 0) return ret; @@ -314,6 +333,20 @@ static __maybe_unused int mdio_bus_phy_resume(struct device *dev) if (ret < 0) return ret; no_resume: + if (phy_interrupt_is_valid(phydev)) { + phydev->irq_suspended = 0; + synchronize_irq(phydev->irq); + + /* Rerun interrupts which were postponed by phy_interrupt() + * because they occurred during the system sleep transition. + */ + if (phydev->irq_rerun) { + phydev->irq_rerun = 0; + enable_irq(phydev->irq); + irq_wake_thread(phydev->irq, phydev); + } + } + if (phydev->attached_dev && phydev->adjust_link) phy_start_machine(phydev); @@ -340,7 +373,7 @@ int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, if (!fixup) return -ENOMEM; - strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); + strscpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); fixup->phy_uid = phy_uid; fixup->phy_uid_mask = phy_uid_mask; fixup->run = run; @@ -490,7 +523,7 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct phy_device *phydev = to_phy_device(dev); - return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); + return sysfs_emit(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id); } static DEVICE_ATTR_RO(phy_id); @@ -505,7 +538,7 @@ phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf) else mode = phy_modes(phydev->interface); - return sprintf(buf, "%s\n", mode); + return sysfs_emit(buf, "%s\n", mode); } static DEVICE_ATTR_RO(phy_interface); @@ -515,7 +548,7 @@ phy_has_fixups_show(struct device *dev, struct device_attribute *attr, { struct phy_device *phydev = to_phy_device(dev); - return sprintf(buf, "%d\n", phydev->has_fixups); + return sysfs_emit(buf, "%d\n", phydev->has_fixups); } static DEVICE_ATTR_RO(phy_has_fixups); @@ -525,7 +558,7 @@ static ssize_t phy_dev_flags_show(struct device *dev, { struct phy_device *phydev = to_phy_device(dev); - return sprintf(buf, "0x%08x\n", phydev->dev_flags); + return sysfs_emit(buf, "0x%08x\n", phydev->dev_flags); } static DEVICE_ATTR_RO(phy_dev_flags); @@ -599,6 +632,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, dev->autoneg = AUTONEG_ENABLE; + dev->pma_extable = -ENODATA; dev->is_c45 = is_c45; dev->phy_id = phy_id; if (c45_ids) @@ -958,6 +992,7 @@ EXPORT_SYMBOL(phy_device_register); void phy_device_remove(struct phy_device *phydev) { unregister_mii_timestamper(phydev->mii_ts); + pse_control_put(phydev->psec); device_del(&phydev->mdio.dev); @@ -1279,7 +1314,7 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr, { struct phy_device *phydev = to_phy_device(dev); - return sprintf(buf, "%d\n", !phydev->attached_dev); + return sysfs_emit(buf, "%d\n", !phydev->attached_dev); } static DEVICE_ATTR_RO(phy_standalone); @@ -1449,6 +1484,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev->state = PHY_READY; + phydev->interrupts = PHY_INTERRUPT_DISABLED; + /* Port is set to PORT_TP by default and the actual PHY driver will set * it to different value depending on the PHY configuration. If we have * the generic PHY driver we can't figure it out, thus set the old @@ -1471,10 +1508,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (err) goto error; - err = phy_disable_interrupts(phydev); - if (err) - return err; - phy_resume(phydev); phy_led_triggers_register(phydev); @@ -1746,6 +1779,9 @@ void phy_detach(struct phy_device *phydev) phy_driver_is_genphy_10g(phydev)) device_release_driver(&phydev->mdio.dev); + /* Assert the reset signal */ + phy_device_reset(phydev, 1); + /* * The phydev might go away on the put_device() below, so avoid * a use-after-free bug by reading the underlying bus first. @@ -1757,9 +1793,6 @@ void phy_detach(struct phy_device *phydev) ndev_owner = dev->dev.parent->driver->owner; if (ndev_owner != bus->owner) module_put(bus->owner); - - /* Assert the reset signal */ - phy_device_reset(phydev, 1); } EXPORT_SYMBOL(phy_detach); @@ -2001,18 +2034,12 @@ EXPORT_SYMBOL(genphy_config_eee_advert); */ int genphy_setup_forced(struct phy_device *phydev) { - u16 ctl = 0; + u16 ctl; phydev->pause = 0; phydev->asym_pause = 0; - if (SPEED_1000 == phydev->speed) - ctl |= BMCR_SPEED1000; - else if (SPEED_100 == phydev->speed) - ctl |= BMCR_SPEED100; - - if (DUPLEX_FULL == phydev->duplex) - ctl |= BMCR_FULLDPLX; + ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); return phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl); @@ -2051,17 +2078,11 @@ static int genphy_setup_master_slave(struct phy_device *phydev) CTL1000_PREFER_MASTER), ctl); } -static int genphy_read_master_slave(struct phy_device *phydev) +int genphy_read_master_slave(struct phy_device *phydev) { int cfg, state; int val; - if (!phydev->is_gigabit_capable) { - phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; - phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; - return 0; - } - phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; @@ -2102,6 +2123,7 @@ static int genphy_read_master_slave(struct phy_device *phydev) return 0; } +EXPORT_SYMBOL(genphy_read_master_slave); /** * genphy_restart_aneg - Enable and Restart Autonegotiation @@ -2396,14 +2418,18 @@ int genphy_read_status(struct phy_device *phydev) if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) return 0; + phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; phydev->speed = SPEED_UNKNOWN; phydev->duplex = DUPLEX_UNKNOWN; phydev->pause = 0; phydev->asym_pause = 0; - err = genphy_read_master_slave(phydev); - if (err < 0) - return err; + if (phydev->is_gigabit_capable) { + err = genphy_read_master_slave(phydev); + if (err < 0) + return err; + } err = genphy_read_lpa(phydev); if (err < 0) @@ -2615,13 +2641,7 @@ int genphy_loopback(struct phy_device *phydev, bool enable) u16 val, ctl = BMCR_LOOPBACK; int ret; - if (phydev->speed == SPEED_1000) - ctl |= BMCR_SPEED1000; - else if (phydev->speed == SPEED_100) - ctl |= BMCR_SPEED100; - - if (phydev->duplex == DUPLEX_FULL) - ctl |= BMCR_FULLDPLX; + ctl |= mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); phy_modify(phydev, MII_BMCR, ~0, ctl); |