diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/lxt.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/marvell.c | 127 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-gpio.c | 12 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-octeon.c | 107 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 41 | ||||
| -rw-r--r-- | drivers/net/phy/phy.c | 66 | ||||
| -rw-r--r-- | drivers/net/phy/spi_ks8995.c | 8 | ||||
| -rw-r--r-- | drivers/net/phy/vitesse.c | 3 |
8 files changed, 271 insertions, 95 deletions
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index ec40ba882f61..ff2e45e9cb54 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -159,7 +159,7 @@ static int lxt973a2_update_link(struct phy_device *phydev) return 0; } -int lxt973a2_read_status(struct phy_device *phydev) +static int lxt973a2_read_status(struct phy_device *phydev) { int adv; int err; diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 22dec9c7ef05..202fe1ff1987 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -7,6 +7,8 @@ * * Copyright (c) 2004 Freescale Semiconductor, Inc. * + * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de> + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -80,6 +82,28 @@ #define MII_88E1318S_PHY_MSCR1_REG 16 #define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6) +/* Copper Specific Interrupt Enable Register */ +#define MII_88E1318S_PHY_CSIER 0x12 +/* WOL Event Interrupt Enable */ +#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) + +/* LED Timer Control Register */ +#define MII_88E1318S_PHY_LED_PAGE 0x03 +#define MII_88E1318S_PHY_LED_TCR 0x12 +#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) + +/* Magic Packet MAC address registers */ +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18 +#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19 + +#define MII_88E1318S_PHY_WOL_PAGE 0x11 +#define MII_88E1318S_PHY_WOL_CTRL 0x10 +#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) +#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) + #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_DEF 0x0030 @@ -696,6 +720,107 @@ static int m88e1121_did_interrupt(struct phy_device *phydev) return 0; } +static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_MAGIC; + wol->wolopts = 0; + + if (phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE) < 0) + return; + + if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) & + MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE) + wol->wolopts |= WAKE_MAGIC; + + if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0) + return; +} + +static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + int err, oldpage, temp; + + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); + + if (wol->wolopts & WAKE_MAGIC) { + /* Explicitly switch to page 0x00, just to be sure */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00); + if (err < 0) + return err; + + /* Enable the WOL interrupt */ + temp = phy_read(phydev, MII_88E1318S_PHY_CSIER); + temp |= MII_88E1318S_PHY_CSIER_WOL_EIE; + err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp); + if (err < 0) + return err; + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_LED_PAGE); + if (err < 0) + return err; + + /* Setup LED[2] as interrupt pin (active low) */ + temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR); + temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT; + temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE; + temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW; + err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp); + if (err < 0) + return err; + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE); + if (err < 0) + return err; + + /* Store the device address for the magic packet */ + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2, + ((phydev->attached_dev->dev_addr[5] << 8) | + phydev->attached_dev->dev_addr[4])); + if (err < 0) + return err; + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1, + ((phydev->attached_dev->dev_addr[3] << 8) | + phydev->attached_dev->dev_addr[2])); + if (err < 0) + return err; + err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0, + ((phydev->attached_dev->dev_addr[1] << 8) | + phydev->attached_dev->dev_addr[0])); + if (err < 0) + return err; + + /* Clear WOL status and enable magic packet matching */ + temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); + temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; + temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; + err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); + if (err < 0) + return err; + } else { + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, + MII_88E1318S_PHY_WOL_PAGE); + if (err < 0) + return err; + + /* Clear WOL status and disable magic packet matching */ + temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL); + temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS; + temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE; + err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp); + if (err < 0) + return err; + } + + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); + if (err < 0) + return err; + + return 0; +} + static struct phy_driver marvell_drivers[] = { { .phy_id = MARVELL_PHY_ID_88E1101, @@ -772,6 +897,8 @@ static struct phy_driver marvell_drivers[] = { .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, .did_interrupt = &m88e1121_did_interrupt, + .get_wol = &m88e1318_get_wol, + .set_wol = &m88e1318_set_wol, .driver = { .owner = THIS_MODULE }, }, { diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 27274986ab56..a47f9236d966 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -235,17 +235,7 @@ static struct platform_driver mdio_gpio_driver = { }, }; -static int __init mdio_gpio_init(void) -{ - return platform_driver_register(&mdio_gpio_driver); -} -module_init(mdio_gpio_init); - -static void __exit mdio_gpio_exit(void) -{ - platform_driver_unregister(&mdio_gpio_driver); -} -module_exit(mdio_gpio_exit); +module_platform_driver(mdio_gpio_driver); MODULE_ALIAS("platform:mdio-gpio"); MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas"); diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c index 09297fe05ae5..b51fa1f469b0 100644 --- a/drivers/net/phy/mdio-octeon.c +++ b/drivers/net/phy/mdio-octeon.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2009,2011 Cavium, Inc. + * Copyright (C) 2009-2012 Cavium, Inc. */ #include <linux/platform_device.h> @@ -27,30 +27,98 @@ #define SMI_CLK 0x18 #define SMI_EN 0x20 +enum octeon_mdiobus_mode { + UNINIT = 0, + C22, + C45 +}; + struct octeon_mdiobus { struct mii_bus *mii_bus; u64 register_base; resource_size_t mdio_phys; resource_size_t regsize; + enum octeon_mdiobus_mode mode; int phy_irq[PHY_MAX_ADDR]; }; +static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p, + enum octeon_mdiobus_mode m) +{ + union cvmx_smix_clk smi_clk; + + if (m == p->mode) + return; + + smi_clk.u64 = cvmx_read_csr(p->register_base + SMI_CLK); + smi_clk.s.mode = (m == C45) ? 1 : 0; + smi_clk.s.preamble = 1; + cvmx_write_csr(p->register_base + SMI_CLK, smi_clk.u64); + p->mode = m; +} + +static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p, + int phy_id, int regnum) +{ + union cvmx_smix_cmd smi_cmd; + union cvmx_smix_wr_dat smi_wr; + int timeout = 1000; + + octeon_mdiobus_set_mode(p, C45); + + smi_wr.u64 = 0; + smi_wr.s.dat = regnum & 0xffff; + cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64); + + regnum = (regnum >> 16) & 0x1f; + + smi_cmd.u64 = 0; + smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_45_ADDRESS */ + smi_cmd.s.phy_adr = phy_id; + smi_cmd.s.reg_adr = regnum; + cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); + + do { + /* Wait 1000 clocks so we don't saturate the RSL bus + * doing reads. + */ + __delay(1000); + smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT); + } while (smi_wr.s.pending && --timeout); + + if (timeout <= 0) + return -EIO; + return 0; +} + static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum) { struct octeon_mdiobus *p = bus->priv; union cvmx_smix_cmd smi_cmd; union cvmx_smix_rd_dat smi_rd; + unsigned int op = 1; /* MDIO_CLAUSE_22_READ */ int timeout = 1000; + if (regnum & MII_ADDR_C45) { + int r = octeon_mdiobus_c45_addr(p, phy_id, regnum); + if (r < 0) + return r; + + regnum = (regnum >> 16) & 0x1f; + op = 3; /* MDIO_CLAUSE_45_READ */ + } else { + octeon_mdiobus_set_mode(p, C22); + } + + smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */ + smi_cmd.s.phy_op = op; smi_cmd.s.phy_adr = phy_id; smi_cmd.s.reg_adr = regnum; cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); do { - /* - * Wait 1000 clocks so we don't saturate the RSL bus + /* Wait 1000 clocks so we don't saturate the RSL bus * doing reads. */ __delay(1000); @@ -69,21 +137,33 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id, struct octeon_mdiobus *p = bus->priv; union cvmx_smix_cmd smi_cmd; union cvmx_smix_wr_dat smi_wr; + unsigned int op = 0; /* MDIO_CLAUSE_22_WRITE */ int timeout = 1000; + + if (regnum & MII_ADDR_C45) { + int r = octeon_mdiobus_c45_addr(p, phy_id, regnum); + if (r < 0) + return r; + + regnum = (regnum >> 16) & 0x1f; + op = 1; /* MDIO_CLAUSE_45_WRITE */ + } else { + octeon_mdiobus_set_mode(p, C22); + } + smi_wr.u64 = 0; smi_wr.s.dat = val; cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64); smi_cmd.u64 = 0; - smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */ + smi_cmd.s.phy_op = op; smi_cmd.s.phy_adr = phy_id; smi_cmd.s.reg_adr = regnum; cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64); do { - /* - * Wait 1000 clocks so we don't saturate the RSL bus + /* Wait 1000 clocks so we don't saturate the RSL bus * doing reads. */ __delay(1000); @@ -197,18 +277,7 @@ void octeon_mdiobus_force_mod_depencency(void) } EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency); -static int __init octeon_mdiobus_mod_init(void) -{ - return platform_driver_register(&octeon_mdiobus_driver); -} - -static void __exit octeon_mdiobus_mod_exit(void) -{ - platform_driver_unregister(&octeon_mdiobus_driver); -} - -module_init(octeon_mdiobus_mod_init); -module_exit(octeon_mdiobus_mod_exit); +module_platform_driver(octeon_mdiobus_driver); MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index abf7b6153d00..2510435f34ed 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -53,6 +53,18 @@ #define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) #define KSZ8051_RMII_50MHZ_CLK (1 << 7) +static int ksz_config_flags(struct phy_device *phydev) +{ + int regval; + + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + regval = phy_read(phydev, MII_KSZPHY_CTRL); + regval |= KSZ8051_RMII_50MHZ_CLK; + return phy_write(phydev, MII_KSZPHY_CTRL, regval); + } + return 0; +} + static int kszphy_ack_interrupt(struct phy_device *phydev) { /* bit[7..0] int status, which is a read and clear register. */ @@ -114,22 +126,19 @@ static int kszphy_config_init(struct phy_device *phydev) static int ksz8021_config_init(struct phy_device *phydev) { + int rc; const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; phy_write(phydev, MII_KSZPHY_OMSO, val); - return 0; + rc = ksz_config_flags(phydev); + return rc < 0 ? rc : 0; } static int ks8051_config_init(struct phy_device *phydev) { - int regval; - - if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { - regval = phy_read(phydev, MII_KSZPHY_CTRL); - regval |= KSZ8051_RMII_50MHZ_CLK; - phy_write(phydev, MII_KSZPHY_CTRL, regval); - } + int rc; - return 0; + rc = ksz_config_flags(phydev); + return rc < 0 ? rc : 0; } #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 @@ -192,6 +201,19 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { + .phy_id = PHY_ID_KSZ8031, + .phy_id_mask = 0x00ffffff, + .name = "Micrel KSZ8031", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ksz8021_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { .phy_id = PHY_ID_KSZ8041, .phy_id_mask = 0x00fffff0, .name = "Micrel KSZ8041", @@ -325,6 +347,7 @@ static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, { PHY_ID_KSZ8021, 0x00ffffff }, + { PHY_ID_KSZ8031, 0x00ffffff }, { PHY_ID_KSZ8041, 0x00fffff0 }, { PHY_ID_KSZ8051, 0x00fffff0 }, { PHY_ID_KSZ8061, 0x00fffff0 }, diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ef9ea9248223..c14f14741b3f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -463,33 +463,6 @@ void phy_stop_machine(struct phy_device *phydev) } /** - * phy_force_reduction - reduce PHY speed/duplex settings by one step - * @phydev: target phy_device struct - * - * Description: Reduces the speed/duplex settings by one notch, - * in this order-- - * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF. - * The function bottoms out at 10/HALF. - */ -static void phy_force_reduction(struct phy_device *phydev) -{ - int idx; - - idx = phy_find_setting(phydev->speed, phydev->duplex); - - idx++; - - idx = phy_find_valid(idx, phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - pr_info("Trying %d/%s\n", - phydev->speed, DUPLEX_FULL == phydev->duplex ? "FULL" : "HALF"); -} - - -/** * phy_error - enter HALTED state for this PHY device * @phydev: target phy_device struct * @@ -818,30 +791,11 @@ void phy_state_machine(struct work_struct *work) phydev->adjust_link(phydev->attached_dev); } else if (0 == phydev->link_timeout--) { - int idx; - needs_aneg = 1; /* If we have the magic_aneg bit, * we try again */ if (phydev->drv->flags & PHY_HAS_MAGICANEG) break; - - /* The timer expired, and we still - * don't have a setting, so we try - * forcing it until we find one that - * works, starting from the fastest speed, - * and working our way down */ - idx = phy_find_valid(0, phydev->supported); - - phydev->speed = settings[idx].speed; - phydev->duplex = settings[idx].duplex; - - phydev->autoneg = AUTONEG_DISABLE; - - pr_info("Trying %d/%s\n", - phydev->speed, - DUPLEX_FULL == phydev->duplex ? - "FULL" : "HALF"); } break; case PHY_NOLINK: @@ -866,10 +820,8 @@ void phy_state_machine(struct work_struct *work) phydev->state = PHY_RUNNING; netif_carrier_on(phydev->attached_dev); } else { - if (0 == phydev->link_timeout--) { - phy_force_reduction(phydev); + if (0 == phydev->link_timeout--) needs_aneg = 1; - } } phydev->adjust_link(phydev->attached_dev); @@ -1188,3 +1140,19 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) return 0; } EXPORT_SYMBOL(phy_ethtool_set_eee); + +int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + if (phydev->drv->set_wol) + return phydev->drv->set_wol(phydev, wol); + + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(phy_ethtool_set_wol); + +void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) +{ + if (phydev->drv->get_wol) + phydev->drv->get_wol(phydev, wol); +} +EXPORT_SYMBOL(phy_ethtool_get_wol); diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c index 5c87eef40bf9..d11c93e69e03 100644 --- a/drivers/net/phy/spi_ks8995.c +++ b/drivers/net/phy/spi_ks8995.c @@ -281,7 +281,7 @@ static int ks8995_probe(struct spi_device *spi) mutex_init(&ks->lock); ks->pdata = pdata; ks->spi = spi_dev_get(spi); - dev_set_drvdata(&spi->dev, ks); + spi_set_drvdata(spi, ks); spi->mode = SPI_MODE_0; spi->bits_per_word = 8; @@ -325,7 +325,7 @@ static int ks8995_probe(struct spi_device *spi) return 0; err_drvdata: - dev_set_drvdata(&spi->dev, NULL); + spi_set_drvdata(spi, NULL); kfree(ks); return err; } @@ -334,10 +334,10 @@ static int ks8995_remove(struct spi_device *spi) { struct ks8995_data *ks8995; - ks8995 = dev_get_drvdata(&spi->dev); + ks8995 = spi_get_drvdata(spi); sysfs_remove_bin_file(&spi->dev.kobj, &ks8995_registers_attr); - dev_set_drvdata(&spi->dev, NULL); + spi_set_drvdata(spi, NULL); kfree(ks8995); return 0; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 2585c383e623..3492b5391273 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -61,7 +61,7 @@ MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); -int vsc824x_add_skew(struct phy_device *phydev) +static int vsc824x_add_skew(struct phy_device *phydev) { int err; int extcon; @@ -81,7 +81,6 @@ int vsc824x_add_skew(struct phy_device *phydev) return err; } -EXPORT_SYMBOL(vsc824x_add_skew); static int vsc824x_config_init(struct phy_device *phydev) { |