diff options
Diffstat (limited to 'drivers/net/wan/lmc/lmc_main.c')
| -rw-r--r-- | drivers/net/wan/lmc/lmc_main.c | 2201 |
1 files changed, 2201 insertions, 0 deletions
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c new file mode 100644 index 000000000000..15e545f66cd7 --- /dev/null +++ b/drivers/net/wan/lmc/lmc_main.c @@ -0,0 +1,2201 @@ + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * With Help By: + * David Boggs + * Ron Crane + * Alan Cox + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + * + * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards. + * + * To control link specific options lmcctl is required. + * It can be obtained from ftp.lanmedia.com. + * + * Linux driver notes: + * Linux uses the device struct lmc_private to pass private information + * arround. + * + * The initialization portion of this driver (the lmc_reset() and the + * lmc_dec_reset() functions, as well as the led controls and the + * lmc_initcsrs() functions. + * + * The watchdog function runs every second and checks to see if + * we still have link, and that the timing source is what we expected + * it to be. If link is lost, the interface is marked down, and + * we no longer can transmit. + * + */ + +/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/in.h> +#include <linux/if_arp.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/inet.h> +#include <linux/bitops.h> + +#include <net/syncppp.h> + +#include <asm/processor.h> /* Processor type for cache alignment. */ +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> +//#include <asm/spinlock.h> + +#define DRIVER_MAJOR_VERSION 1 +#define DRIVER_MINOR_VERSION 34 +#define DRIVER_SUB_VERSION 0 + +#define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION) + +#include "lmc.h" +#include "lmc_var.h" +#include "lmc_ioctl.h" +#include "lmc_debug.h" +#include "lmc_proto.h" + +static int lmc_first_load = 0; + +static int LMC_PKT_BUF_SZ = 1542; + +static struct pci_device_id lmc_pci_tbl[] = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_VENDOR_ID_LMC, PCI_ANY_ID }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_ANY_ID, PCI_VENDOR_ID_LMC }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, lmc_pci_tbl); +MODULE_LICENSE("GPL"); + + +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int lmc_rx (struct net_device *dev); +static int lmc_open(struct net_device *dev); +static int lmc_close(struct net_device *dev); +static struct net_device_stats *lmc_get_stats(struct net_device *dev); +static irqreturn_t lmc_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size); +static void lmc_softreset(lmc_softc_t * const); +static void lmc_running_reset(struct net_device *dev); +static int lmc_ifdown(struct net_device * const); +static void lmc_watchdog(unsigned long data); +static void lmc_reset(lmc_softc_t * const sc); +static void lmc_dec_reset(lmc_softc_t * const sc); +static void lmc_driver_timeout(struct net_device *dev); + +/* + * linux reserves 16 device specific IOCTLs. We call them + * LMCIOC* to control various bits of our world. + */ +int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ +{ + lmc_softc_t *sc; + lmc_ctl_t ctl; + int ret; + u_int16_t regVal; + unsigned long flags; + + struct sppp *sp; + + ret = -EOPNOTSUPP; + + sc = dev->priv; + + lmc_trace(dev, "lmc_ioctl in"); + + /* + * Most functions mess with the structure + * Disable interrupts while we do the polling + */ + spin_lock_irqsave(&sc->lmc_lock, flags); + + switch (cmd) { + /* + * Return current driver state. Since we keep this up + * To date internally, just copy this out to the user. + */ + case LMCIOCGINFO: /*fold01*/ + if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t))) + return -EFAULT; + ret = 0; + break; + + case LMCIOCSINFO: /*fold01*/ + sp = &((struct ppp_device *) dev)->sppp; + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + + if(dev->flags & IFF_UP){ + ret = -EBUSY; + break; + } + + if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) + return -EFAULT; + + sc->lmc_media->set_status (sc, &ctl); + + if(ctl.crc_length != sc->ictl.crc_length) { + sc->lmc_media->set_crc_length(sc, ctl.crc_length); + if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) + sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE; + else + sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE; + } + + if (ctl.keepalive_onoff == LMC_CTL_OFF) + sp->pp_flags &= ~PP_KEEPALIVE; /* Turn off */ + else + sp->pp_flags |= PP_KEEPALIVE; /* Turn on */ + + ret = 0; + break; + + case LMCIOCIFTYPE: /*fold01*/ + { + u_int16_t old_type = sc->if_type; + u_int16_t new_type; + + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + + if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) + return -EFAULT; + + + if (new_type == old_type) + { + ret = 0 ; + break; /* no change */ + } + + lmc_proto_close(sc); + lmc_proto_detach(sc); + + sc->if_type = new_type; +// lmc_proto_init(sc); + lmc_proto_attach(sc); + lmc_proto_open(sc); + + ret = 0 ; + break ; + } + + case LMCIOCGETXINFO: /*fold01*/ + sc->lmc_xinfo.Magic0 = 0xBEEFCAFE; + + sc->lmc_xinfo.PciCardType = sc->lmc_cardtype; + sc->lmc_xinfo.PciSlotNumber = 0; + sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION; + sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION; + sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION; + sc->lmc_xinfo.XilinxRevisionNumber = + lmc_mii_readreg (sc, 0, 3) & 0xf; + sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ; + sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc); + sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16); + + sc->lmc_xinfo.Magic1 = 0xDEADBEEF; + + if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo, + sizeof (struct lmc_xinfo))) + return -EFAULT; + ret = 0; + + break; + + case LMCIOCGETLMCSTATS: /*fold01*/ + if (sc->lmc_cardtype == LMC_CARDTYPE_T1){ + lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB); + sc->stats.framingBitErrorCount += + lmc_mii_readreg (sc, 0, 18) & 0xff; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB); + sc->stats.framingBitErrorCount += + (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB); + sc->stats.lineCodeViolationCount += + lmc_mii_readreg (sc, 0, 18) & 0xff; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB); + sc->stats.lineCodeViolationCount += + (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR); + regVal = lmc_mii_readreg (sc, 0, 18) & 0xff; + + sc->stats.lossOfFrameCount += + (regVal & T1FRAMER_LOF_MASK) >> 4; + sc->stats.changeOfFrameAlignmentCount += + (regVal & T1FRAMER_COFA_MASK) >> 2; + sc->stats.severelyErroredFrameCount += + regVal & T1FRAMER_SEF_MASK; + } + + if (copy_to_user(ifr->ifr_data, &sc->stats, + sizeof (struct lmc_statistics))) + return -EFAULT; + + ret = 0; + break; + + case LMCIOCCLEARLMCSTATS: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + memset (&sc->stats, 0, sizeof (struct lmc_statistics)); + sc->stats.check = STATCHECK; + sc->stats.version_size = (DRIVER_VERSION << 16) + + sizeof (struct lmc_statistics); + sc->stats.lmc_cardtype = sc->lmc_cardtype; + ret = 0; + break; + + case LMCIOCSETCIRCUIT: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + if(dev->flags & IFF_UP){ + ret = -EBUSY; + break; + } + + if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) + return -EFAULT; + sc->lmc_media->set_circuit_type(sc, ctl.circuit_type); + sc->ictl.circuit_type = ctl.circuit_type; + ret = 0; + + break; + + case LMCIOCRESET: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + /* Reset driver and bring back to current state */ + printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); + lmc_running_reset (dev); + printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); + + LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16)); + + ret = 0; + break; + +#ifdef DEBUG + case LMCIOCDUMPEVENTLOG: + if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32))) + return -EFAULT; + if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf))) + return -EFAULT; + + ret = 0; + break; +#endif /* end ifdef _DBG_EVENTLOG */ + case LMCIOCT1CONTROL: /*fold01*/ + if (sc->lmc_cardtype != LMC_CARDTYPE_T1){ + ret = -EOPNOTSUPP; + break; + } + break; + case LMCIOCXILINX: /*fold01*/ + { + struct lmc_xilinx_control xc; /*fold02*/ + + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + /* + * Stop the xwitter whlie we restart the hardware + */ + netif_stop_queue(dev); + + if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control))) + return -EFAULT; + switch(xc.command){ + case lmc_xilinx_reset: /*fold02*/ + { + u16 mii; + mii = lmc_mii_readreg (sc, 0, 16); + + /* + * Make all of them 0 and make input + */ + lmc_gpio_mkinput(sc, 0xff); + + /* + * make the reset output + */ + lmc_gpio_mkoutput(sc, LMC_GEP_RESET); + + /* + * RESET low to force configuration. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + + sc->lmc_gpio &= ~LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + sc->lmc_gpio |= LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, 0xff); + + /* Reset the frammer hardware */ + sc->lmc_media->set_link_status (sc, 1); + sc->lmc_media->set_status (sc, NULL); +// lmc_softreset(sc); + + { + int i; + for(i = 0; i < 5; i++){ + lmc_led_on(sc, LMC_DS3_LED0); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED0); + lmc_led_on(sc, LMC_DS3_LED1); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED1); + lmc_led_on(sc, LMC_DS3_LED3); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED3); + lmc_led_on(sc, LMC_DS3_LED2); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED2); + } + } + + + + ret = 0x0; + + } + + break; + case lmc_xilinx_load_prom: /*fold02*/ + { + u16 mii; + int timeout = 500000; + mii = lmc_mii_readreg (sc, 0, 16); + + /* + * Make all of them 0 and make input + */ + lmc_gpio_mkinput(sc, 0xff); + + /* + * make the reset output + */ + lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET); + + /* + * RESET low to force configuration. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + + sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP); + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + /* + * busy wait for the chip to reset + */ + while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 && + (timeout-- > 0)) + ; + + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, 0xff); + + ret = 0x0; + + + break; + + } + + case lmc_xilinx_load: /*fold02*/ + { + char *data; + int pos; + int timeout = 500000; + + if(xc.data == 0x0){ + ret = -EINVAL; + break; + } + + data = kmalloc(xc.len, GFP_KERNEL); + if(data == 0x0){ + printk(KERN_WARNING "%s: Failed to allocate memory for copy\n", dev->name); + ret = -ENOMEM; + break; + } + + if(copy_from_user(data, xc.data, xc.len)) + { + kfree(data); + ret = -ENOMEM; + break; + } + + printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data); + + lmc_gpio_mkinput(sc, 0xff); + + /* + * Clear the Xilinx and start prgramming from the DEC + */ + + /* + * Set ouput as: + * Reset: 0 (active) + * DP: 0 (active) + * Mode: 1 + * + */ + sc->lmc_gpio = 0x00; + sc->lmc_gpio &= ~LMC_GEP_DP; + sc->lmc_gpio &= ~LMC_GEP_RESET; + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET); + + /* + * Wait at least 10 us 20 to be safe + */ + udelay(50); + + /* + * Clear reset and activate programming lines + * Reset: Input + * DP: Input + * Clock: Output + * Data: Output + * Mode: Output + */ + lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET); + + /* + * Set LOAD, DATA, Clock to 1 + */ + sc->lmc_gpio = 0x00; + sc->lmc_gpio |= LMC_GEP_MODE; + sc->lmc_gpio |= LMC_GEP_DATA; + sc->lmc_gpio |= LMC_GEP_CLK; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE ); + + /* + * busy wait for the chip to reset + */ + while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 && + (timeout-- > 0)) + ; + + printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout); + + for(pos = 0; pos < xc.len; pos++){ + switch(data[pos]){ + case 0: + sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */ + break; + case 1: + sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */ + break; + default: + printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]); + sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */ + } + sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */ + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + udelay(1); + + sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */ + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + udelay(1); + } + if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){ + printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name); + } + else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){ + printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name); + } + else { + printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos); + } + + lmc_gpio_mkinput(sc, 0xff); + + sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + kfree(data); + + ret = 0; + + break; + } + default: /*fold02*/ + ret = -EBADE; + break; + } + + netif_wake_queue(dev); + sc->lmc_txfull = 0; + + } + break; + default: /*fold01*/ + /* If we don't know what to do, give the protocol a shot. */ + ret = lmc_proto_ioctl (sc, ifr, cmd); + break; + } + + spin_unlock_irqrestore(&sc->lmc_lock, flags); /*fold01*/ + + lmc_trace(dev, "lmc_ioctl out"); + + return ret; +} + + +/* the watchdog process that cruises around */ +static void lmc_watchdog (unsigned long data) /*fold00*/ +{ + struct net_device *dev = (struct net_device *) data; + lmc_softc_t *sc; + int link_status; + u_int32_t ticks; + unsigned long flags; + + sc = dev->priv; + + lmc_trace(dev, "lmc_watchdog in"); + + spin_lock_irqsave(&sc->lmc_lock, flags); + + if(sc->check != 0xBEAFCAFE){ + printk("LMC: Corrupt net_device stuct, breaking out\n"); + spin_unlock_irqrestore(&sc->lmc_lock, flags); + return; + } + + + /* Make sure the tx jabber and rx watchdog are off, + * and the transmit and receive processes are running. + */ + + LMC_CSR_WRITE (sc, csr_15, 0x00000011); + sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN; + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + if (sc->lmc_ok == 0) + goto kick_timer; + + LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16)); + + /* --- begin time out check ----------------------------------- + * check for a transmit interrupt timeout + * Has the packet xmt vs xmt serviced threshold been exceeded */ + if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && + sc->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd == 0) + { + + /* wait for the watchdog to come around again */ + sc->tx_TimeoutInd = 1; + } + else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && + sc->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd) + { + + LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0); + + sc->tx_TimeoutDisplay = 1; + sc->stats.tx_TimeoutCnt++; + + /* DEC chip is stuck, hit it with a RESET!!!! */ + lmc_running_reset (dev); + + + /* look at receive & transmit process state to make sure they are running */ + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + + /* look at: DSR - 02 for Reg 16 + * CTS - 08 + * DCD - 10 + * RI - 20 + * for Reg 17 + */ + LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17)); + + /* reset the transmit timeout detection flag */ + sc->tx_TimeoutInd = 0; + sc->lastlmc_taint_tx = sc->lmc_taint_tx; + sc->lasttx_packets = sc->stats.tx_packets; + } + else + { + sc->tx_TimeoutInd = 0; + sc->lastlmc_taint_tx = sc->lmc_taint_tx; + sc->lasttx_packets = sc->stats.tx_packets; + } + + /* --- end time out check ----------------------------------- */ + + + link_status = sc->lmc_media->get_link_status (sc); + + /* + * hardware level link lost, but the interface is marked as up. + * Mark it as down. + */ + if ((link_status == 0) && (sc->last_link_status != 0)) { + printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name); + sc->last_link_status = 0; + /* lmc_reset (sc); Why reset??? The link can go down ok */ + + /* Inform the world that link has been lost */ + dev->flags &= ~IFF_RUNNING; + } + + /* + * hardware link is up, but the interface is marked as down. + * Bring it back up again. + */ + if (link_status != 0 && sc->last_link_status == 0) { + printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name); + sc->last_link_status = 1; + /* lmc_reset (sc); Again why reset??? */ + + /* Inform the world that link protocol is back up. */ + dev->flags |= IFF_RUNNING; + + /* Now we have to tell the syncppp that we had an outage + * and that it should deal. Calling sppp_reopen here + * should do the trick, but we may have to call sppp_close + * when the link goes down, and call sppp_open here. + * Subject to more testing. + * --bbraun + */ + + lmc_proto_reopen(sc); + + } + + /* Call media specific watchdog functions */ + sc->lmc_media->watchdog(sc); + + /* + * Poke the transmitter to make sure it + * never stops, even if we run out of mem + */ + LMC_CSR_WRITE(sc, csr_rxpoll, 0); + + /* + * Check for code that failed + * and try and fix it as appropriate + */ + if(sc->failed_ring == 1){ + /* + * Failed to setup the recv/xmit rin + * Try again + */ + sc->failed_ring = 0; + lmc_softreset(sc); + } + if(sc->failed_recv_alloc == 1){ + /* + * We failed to alloc mem in the + * interrupt handler, go through the rings + * and rebuild them + */ + sc->failed_recv_alloc = 0; + lmc_softreset(sc); + } + + + /* + * remember the timer value + */ +kick_timer: + + ticks = LMC_CSR_READ (sc, csr_gp_timer); + LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL); + sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff); + + /* + * restart this timer. + */ + sc->timer.expires = jiffies + (HZ); + add_timer (&sc->timer); + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_watchdog out"); + +} + +static void lmc_setup(struct net_device * const dev) /*fold00*/ +{ + lmc_trace(dev, "lmc_setup in"); + + dev->type = ARPHRD_HDLC; + dev->hard_start_xmit = lmc_start_xmit; + dev->open = lmc_open; + dev->stop = lmc_close; + dev->get_stats = lmc_get_stats; + dev->do_ioctl = lmc_ioctl; + dev->tx_timeout = lmc_driver_timeout; + dev->watchdog_timeo = (HZ); /* 1 second */ + + lmc_trace(dev, "lmc_setup out"); +} + + +static int __devinit lmc_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + lmc_softc_t *sc; + u16 subdevice; + u_int16_t AdapModelNum; + int err = -ENOMEM; + static int cards_found; +#ifndef GCOM + /* We name by type not by vendor */ + static const char lmcname[] = "hdlc%d"; +#else + /* + * GCOM uses LMC vendor name so that clients can know which card + * to attach to. + */ + static const char lmcname[] = "lmc%d"; +#endif + + + /* + * Allocate our own device structure + */ + dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup); + if (!dev) { + printk (KERN_ERR "lmc:alloc_netdev for device failed\n"); + goto out1; + } + + lmc_trace(dev, "lmc_init_one in"); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "lmc: pci enable failed:%d\n", err); + goto out2; + } + + if (pci_request_regions(pdev, "lmc")) { + printk(KERN_ERR "lmc: pci_request_region failed\n"); + err = -EIO; + goto out3; + } + + pci_set_drvdata(pdev, dev); + + if(lmc_first_load == 0){ + printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n", + DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION); + lmc_first_load = 1; + } + + sc = dev->priv; + sc->lmc_device = dev; + sc->name = dev->name; + + /* Initialize the sppp layer */ + /* An ioctl can cause a subsequent detach for raw frame interface */ + sc->if_type = LMC_PPP; + sc->check = 0xBEAFCAFE; + dev->base_addr = pci_resource_start(pdev, 0); + dev->irq = pdev->irq; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + /* + * This will get the protocol layer ready and do any 1 time init's + * Must have a valid sc and dev structure + */ + lmc_proto_init(sc); + + lmc_proto_attach(sc); + + /* + * Why were we changing this??? + dev->tx_queue_len = 100; + */ + + /* Init the spin lock so can call it latter */ + + spin_lock_init(&sc->lmc_lock); + pci_set_master(pdev); + + printk ("%s: detected at %lx, irq %d\n", dev->name, + dev->base_addr, dev->irq); + + if (register_netdev (dev) != 0) { + printk (KERN_ERR "%s: register_netdev failed.\n", dev->name); + goto out4; + } + + sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN; + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; + + /* + * + * Check either the subvendor or the subdevice, some systems reverse + * the setting in the bois, seems to be version and arch dependent? + * Fix the error, exchange the two values + */ + if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC) + subdevice = pdev->subsystem_vendor; + + switch (subdevice) { + case PCI_DEVICE_ID_LMC_HSSI: + printk ("%s: LMC HSSI\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_HSSI; + sc->lmc_media = &lmc_hssi_media; + break; + case PCI_DEVICE_ID_LMC_DS3: + printk ("%s: LMC DS3\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_DS3; + sc->lmc_media = &lmc_ds3_media; + break; + case PCI_DEVICE_ID_LMC_SSI: + printk ("%s: LMC SSI\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_SSI; + sc->lmc_media = &lmc_ssi_media; + break; + case PCI_DEVICE_ID_LMC_T1: + printk ("%s: LMC T1\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_T1; + sc->lmc_media = &lmc_t1_media; + break; + default: + printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + break; + } + + lmc_initcsrs (sc, dev->base_addr, 8); + + lmc_gpio_mkinput (sc, 0xff); + sc->lmc_gpio = 0; /* drive no signals yet */ + + sc->lmc_media->defaults (sc); + + sc->lmc_media->set_link_status (sc, LMC_LINK_UP); + + /* verify that the PCI Sub System ID matches the Adapter Model number + * from the MII register + */ + AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4; + + if ((AdapModelNum == LMC_ADAP_T1 + && subdevice == PCI_DEVICE_ID_LMC_T1) || /* detect LMC1200 */ + (AdapModelNum == LMC_ADAP_SSI + && subdevice == PCI_DEVICE_ID_LMC_SSI) || /* detect LMC1000 */ + (AdapModelNum == LMC_ADAP_DS3 + && subdevice == PCI_DEVICE_ID_LMC_DS3) || /* detect LMC5245 */ + (AdapModelNum == LMC_ADAP_HSSI + && subdevice == PCI_DEVICE_ID_LMC_HSSI)) + { /* detect LMC5200 */ + + } + else { + printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n", + dev->name, AdapModelNum, subdevice); +// return (NULL); + } + /* + * reset clock + */ + LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL); + + sc->board_idx = cards_found++; + sc->stats.check = STATCHECK; + sc->stats.version_size = (DRIVER_VERSION << 16) + + sizeof (struct lmc_statistics); + sc->stats.lmc_cardtype = sc->lmc_cardtype; + + sc->lmc_ok = 0; + sc->last_link_status = 0; + + lmc_trace(dev, "lmc_init_one out"); + return 0; + + out4: + lmc_proto_detach(sc); + out3: + if (pdev) { + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + } + out2: + free_netdev(dev); + out1: + return err; +} + +/* + * Called from pci when removing module. + */ +static void __devexit lmc_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + lmc_softc_t *sc = dev->priv; + + printk("%s: removing...\n", dev->name); + lmc_proto_detach(sc); + unregister_netdev(dev); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } +} + +/* After this is called, packets can be sent. + * Does not initialize the addresses + */ +static int lmc_open (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + + lmc_trace(dev, "lmc_open in"); + + lmc_led_on(sc, LMC_DS3_LED0); + + lmc_dec_reset (sc); + lmc_reset (sc); + + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + + if (sc->lmc_ok){ + lmc_trace(dev, "lmc_open lmc_ok out"); + return (0); + } + + lmc_softreset (sc); + + /* Since we have to use PCI bus, this should work on x86,alpha,ppc */ + if (request_irq (dev->irq, &lmc_interrupt, SA_SHIRQ, dev->name, dev)){ + printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq); + lmc_trace(dev, "lmc_open irq failed out"); + return -EAGAIN; + } + sc->got_irq = 1; + + /* Assert Terminal Active */ + sc->lmc_miireg16 |= LMC_MII16_LED_ALL; + sc->lmc_media->set_link_status (sc, LMC_LINK_UP); + + /* + * reset to last state. + */ + sc->lmc_media->set_status (sc, NULL); + + /* setup default bits to be used in tulip_desc_t transmit descriptor + * -baz */ + sc->TxDescriptControlInit = ( + LMC_TDES_INTERRUPT_ON_COMPLETION + | LMC_TDES_FIRST_SEGMENT + | LMC_TDES_LAST_SEGMENT + | LMC_TDES_SECOND_ADDR_CHAINED + | LMC_TDES_DISABLE_PADDING + ); + + if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) { + /* disable 32 bit CRC generated by ASIC */ + sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE; + } + sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length); + /* Acknoledge the Terminal Active and light LEDs */ + + /* dev->flags |= IFF_UP; */ + + lmc_proto_open(sc); + + dev->do_ioctl = lmc_ioctl; + + + netif_start_queue(dev); + + sc->stats.tx_tbusy0++ ; + + /* + * select what interrupts we want to get + */ + sc->lmc_intrmask = 0; + /* Should be using the default interrupt mask defined in the .h file. */ + sc->lmc_intrmask |= (TULIP_STS_NORMALINTR + | TULIP_STS_RXINTR + | TULIP_STS_TXINTR + | TULIP_STS_ABNRMLINTR + | TULIP_STS_SYSERROR + | TULIP_STS_TXSTOPPED + | TULIP_STS_TXUNDERFLOW + | TULIP_STS_RXSTOPPED + | TULIP_STS_RXNOBUF + ); + LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); + + sc->lmc_cmdmode |= TULIP_CMD_TXRUN; + sc->lmc_cmdmode |= TULIP_CMD_RXRUN; + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + sc->lmc_ok = 1; /* Run watchdog */ + + /* + * Set the if up now - pfb + */ + + sc->last_link_status = 1; + + /* + * Setup a timer for the watchdog on probe, and start it running. + * Since lmc_ok == 0, it will be a NOP for now. + */ + init_timer (&sc->timer); + sc->timer.expires = jiffies + HZ; + sc->timer.data = (unsigned long) dev; + sc->timer.function = &lmc_watchdog; + add_timer (&sc->timer); + + lmc_trace(dev, "lmc_open out"); + + return (0); +} + +/* Total reset to compensate for the AdTran DSU doing bad things + * under heavy load + */ + +static void lmc_running_reset (struct net_device *dev) /*fold00*/ +{ + + lmc_softc_t *sc = (lmc_softc_t *) dev->priv; + + lmc_trace(dev, "lmc_runnig_reset in"); + + /* stop interrupts */ + /* Clear the interrupt mask */ + LMC_CSR_WRITE (sc, csr_intr, 0x00000000); + + lmc_dec_reset (sc); + lmc_reset (sc); + lmc_softreset (sc); + /* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */ + sc->lmc_media->set_link_status (sc, 1); + sc->lmc_media->set_status (sc, NULL); + + //dev->flags |= IFF_RUNNING; + + netif_wake_queue(dev); + + sc->lmc_txfull = 0; + sc->stats.tx_tbusy0++ ; + + sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK; + LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); + + sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN); + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + lmc_trace(dev, "lmc_runnin_reset_out"); +} + + +/* This is what is called when you ifconfig down a device. + * This disables the timer for the watchdog and keepalives, + * and disables the irq for dev. + */ +static int lmc_close (struct net_device *dev) /*fold00*/ +{ + /* not calling release_region() as we should */ + lmc_softc_t *sc; + + lmc_trace(dev, "lmc_close in"); + + sc = dev->priv; + sc->lmc_ok = 0; + sc->lmc_media->set_link_status (sc, 0); + del_timer (&sc->timer); + lmc_proto_close(sc); + lmc_ifdown (dev); + + lmc_trace(dev, "lmc_close out"); + + return 0; +} + +/* Ends the transfer of packets */ +/* When the interface goes down, this is called */ +static int lmc_ifdown (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + u32 csr6; + int i; + + lmc_trace(dev, "lmc_ifdown in"); + + /* Don't let anything else go on right now */ + // dev->start = 0; + netif_stop_queue(dev); + sc->stats.tx_tbusy1++ ; + + /* stop interrupts */ + /* Clear the interrupt mask */ + LMC_CSR_WRITE (sc, csr_intr, 0x00000000); + + /* Stop Tx and Rx on the chip */ + csr6 = LMC_CSR_READ (sc, csr_command); + csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */ + csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ + LMC_CSR_WRITE (sc, csr_command, csr6); + + dev->flags &= ~IFF_RUNNING; + + sc->stats.rx_missed_errors += + LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + + /* release the interrupt */ + if(sc->got_irq == 1){ + free_irq (dev->irq, dev); + sc->got_irq = 0; + } + + /* free skbuffs in the Rx queue */ + for (i = 0; i < LMC_RXDESCS; i++) + { + struct sk_buff *skb = sc->lmc_rxq[i]; + sc->lmc_rxq[i] = NULL; + sc->lmc_rxring[i].status = 0; + sc->lmc_rxring[i].length = 0; + sc->lmc_rxring[i].buffer1 = 0xDEADBEEF; + if (skb != NULL) + dev_kfree_skb(skb); + sc->lmc_rxq[i] = NULL; + } + + for (i = 0; i < LMC_TXDESCS; i++) + { + if (sc->lmc_txq[i] != NULL) + dev_kfree_skb(sc->lmc_txq[i]); + sc->lmc_txq[i] = NULL; + } + + lmc_led_off (sc, LMC_MII16_LED_ALL); + + netif_wake_queue(dev); + sc->stats.tx_tbusy0++ ; + + lmc_trace(dev, "lmc_ifdown out"); + + return 0; +} + +/* Interrupt handling routine. This will take an incoming packet, or clean + * up after a trasmit. + */ +static irqreturn_t lmc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) /*fold00*/ +{ + struct net_device *dev = (struct net_device *) dev_instance; + lmc_softc_t *sc; + u32 csr; + int i; + s32 stat; + unsigned int badtx; + u32 firstcsr; + int max_work = LMC_RXDESCS; + int handled = 0; + + lmc_trace(dev, "lmc_interrupt in"); + + sc = dev->priv; + + spin_lock(&sc->lmc_lock); + + /* + * Read the csr to find what interrupts we have (if any) + */ + csr = LMC_CSR_READ (sc, csr_status); + + /* + * Make sure this is our interrupt + */ + if ( ! (csr & sc->lmc_intrmask)) { + goto lmc_int_fail_out; + } + + firstcsr = csr; + + /* always go through this loop at least once */ + while (csr & sc->lmc_intrmask) { + handled = 1; + + /* + * Clear interrupt bits, we handle all case below + */ + LMC_CSR_WRITE (sc, csr_status, csr); + + /* + * One of + * - Transmit process timed out CSR5<1> + * - Transmit jabber timeout CSR5<3> + * - Transmit underflow CSR5<5> + * - Transmit Receiver buffer unavailable CSR5<7> + * - Receive process stopped CSR5<8> + * - Receive watchdog timeout CSR5<9> + * - Early transmit interrupt CSR5<10> + * + * Is this really right? Should we do a running reset for jabber? + * (being a WAN card and all) + */ + if (csr & TULIP_STS_ABNRMLINTR){ + lmc_running_reset (dev); + break; + } + + if (csr & TULIP_STS_RXINTR){ + lmc_trace(dev, "rx interrupt"); + lmc_rx (dev); + + } + if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) { + + int n_compl = 0 ; + /* reset the transmit timeout detection flag -baz */ + sc->stats.tx_NoCompleteCnt = 0; + + badtx = sc->lmc_taint_tx; + i = badtx % LMC_TXDESCS; + + while ((badtx < sc->lmc_next_tx)) { + stat = sc->lmc_txring[i].status; + + LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat, + sc->lmc_txring[i].length); + /* + * If bit 31 is 1 the tulip owns it break out of the loop + */ + if (stat & 0x80000000) + break; + + n_compl++ ; /* i.e., have an empty slot in ring */ + /* + * If we have no skbuff or have cleared it + * Already continue to the next buffer + */ + if (sc->lmc_txq[i] == NULL) + continue; + + /* + * Check the total error summary to look for any errors + */ + if (stat & 0x8000) { + sc->stats.tx_errors++; + if (stat & 0x4104) + sc->stats.tx_aborted_errors++; + if (stat & 0x0C00) + sc->stats.tx_carrier_errors++; + if (stat & 0x0200) + sc->stats.tx_window_errors++; + if (stat & 0x0002) + sc->stats.tx_fifo_errors++; + } + else { + + sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; + + sc->stats.tx_packets++; + } + + // dev_kfree_skb(sc->lmc_txq[i]); + dev_kfree_skb_irq(sc->lmc_txq[i]); + sc->lmc_txq[i] = NULL; + + badtx++; + i = badtx % LMC_TXDESCS; + } + + if (sc->lmc_next_tx - badtx > LMC_TXDESCS) + { + printk ("%s: out of sync pointer\n", dev->name); + badtx += LMC_TXDESCS; + } + LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0); + sc->lmc_txfull = 0; + netif_wake_queue(dev); + sc->stats.tx_tbusy0++ ; + + +#ifdef DEBUG + sc->stats.dirtyTx = badtx; + sc->stats.lmc_next_tx = sc->lmc_next_tx; + sc->stats.lmc_txfull = sc->lmc_txfull; +#endif + sc->lmc_taint_tx = badtx; + + /* + * Why was there a break here??? + */ + } /* end handle transmit interrupt */ + + if (csr & TULIP_STS_SYSERROR) { + u32 error; + printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr); + error = csr>>23 & 0x7; + switch(error){ + case 0x000: + printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name); + break; + case 0x001: + printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name); + break; + case 0x010: + printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name); + break; + default: + printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name); + } + lmc_dec_reset (sc); + lmc_reset (sc); + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + } + + + if(max_work-- <= 0) + break; + + /* + * Get current csr status to make sure + * we've cleared all interrupts + */ + csr = LMC_CSR_READ (sc, csr_status); + } /* end interrupt loop */ + LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr); + +lmc_int_fail_out: + + spin_unlock(&sc->lmc_lock); + + lmc_trace(dev, "lmc_interrupt out"); + return IRQ_RETVAL(handled); +} + +static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc; + u32 flag; + int entry; + int ret = 0; + unsigned long flags; + + lmc_trace(dev, "lmc_start_xmit in"); + + sc = dev->priv; + + spin_lock_irqsave(&sc->lmc_lock, flags); + + /* normal path, tbusy known to be zero */ + + entry = sc->lmc_next_tx % LMC_TXDESCS; + + sc->lmc_txq[entry] = skb; + sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data); + + LMC_CONSOLE_LOG("xmit", skb->data, skb->len); + +#ifndef GCOM + /* If the queue is less than half full, don't interrupt */ + if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2) + { + /* Do not interrupt on completion of this packet */ + flag = 0x60000000; + netif_wake_queue(dev); + } + else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2) + { + /* This generates an interrupt on completion of this packet */ + flag = 0xe0000000; + netif_wake_queue(dev); + } + else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1) + { + /* Do not interrupt on completion of this packet */ + flag = 0x60000000; + netif_wake_queue(dev); + } + else + { + /* This generates an interrupt on completion of this packet */ + flag = 0xe0000000; + sc->lmc_txfull = 1; + netif_stop_queue(dev); + } +#else + flag = LMC_TDES_INTERRUPT_ON_COMPLETION; + + if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1) + { /* ring full, go busy */ + sc->lmc_txfull = 1; + netif_stop_queue(dev); + sc->stats.tx_tbusy1++ ; + LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0); + } +#endif + + + if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */ + flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */ + + /* don't pad small packets either */ + flag = sc->lmc_txring[entry].length = (skb->len) | flag | + sc->TxDescriptControlInit; + + /* set the transmit timeout flag to be checked in + * the watchdog timer handler. -baz + */ + + sc->stats.tx_NoCompleteCnt++; + sc->lmc_next_tx++; + + /* give ownership to the chip */ + LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry); + sc->lmc_txring[entry].status = 0x80000000; + + /* send now! */ + LMC_CSR_WRITE (sc, csr_txpoll, 0); + + dev->trans_start = jiffies; + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_start_xmit_out"); + return ret; +} + + +static int lmc_rx (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc; + int i; + int rx_work_limit = LMC_RXDESCS; + unsigned int next_rx; + int rxIntLoopCnt; /* debug -baz */ + int localLengthErrCnt = 0; + long stat; + struct sk_buff *skb, *nsb; + u16 len; + + lmc_trace(dev, "lmc_rx in"); + + sc = dev->priv; + + lmc_led_on(sc, LMC_DS3_LED3); + + rxIntLoopCnt = 0; /* debug -baz */ + + i = sc->lmc_next_rx % LMC_RXDESCS; + next_rx = sc->lmc_next_rx; + + while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4) + { + rxIntLoopCnt++; /* debug -baz */ + len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER); + if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */ + if ((stat & 0x0000ffff) != 0x7fff) { + /* Oversized frame */ + sc->stats.rx_length_errors++; + goto skip_packet; + } + } + + if(stat & 0x00000008){ /* Catch a dribbling bit error */ + sc->stats.rx_errors++; + sc->stats.rx_frame_errors++; + goto skip_packet; + } + + + if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */ + sc->stats.rx_errors++; + sc->stats.rx_crc_errors++; + goto skip_packet; + } + + + if (len > LMC_PKT_BUF_SZ){ + sc->stats.rx_length_errors++; + localLengthErrCnt++; + goto skip_packet; + } + + if (len < sc->lmc_crcSize + 2) { + sc->stats.rx_length_errors++; + sc->stats.rx_SmallPktCnt++; + localLengthErrCnt++; + goto skip_packet; + } + + if(stat & 0x00004000){ + printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name); + } + + len -= sc->lmc_crcSize; + + skb = sc->lmc_rxq[i]; + + /* + * We ran out of memory at some point + * just allocate an skb buff and continue. + */ + + if(skb == 0x0){ + nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if (nsb) { + sc->lmc_rxq[i] = nsb; + nsb->dev = dev; + sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail); + } + sc->failed_recv_alloc = 1; + goto skip_packet; + } + + dev->last_rx = jiffies; + sc->stats.rx_packets++; + sc->stats.rx_bytes += len; + + LMC_CONSOLE_LOG("recv", skb->data, len); + + /* + * I'm not sure of the sanity of this + * Packets could be arriving at a constant + * 44.210mbits/sec and we're going to copy + * them into a new buffer?? + */ + + if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */ + /* + * If it's a large packet don't copy it just hand it up + */ + give_it_anyways: + + sc->lmc_rxq[i] = NULL; + sc->lmc_rxring[i].buffer1 = 0x0; + + skb_put (skb, len); + skb->protocol = lmc_proto_type(sc, skb); + skb->protocol = htons(ETH_P_WAN_PPP); + skb->mac.raw = skb->data; +// skb->nh.raw = skb->data; + skb->dev = dev; + lmc_proto_netif(sc, skb); + + /* + * This skb will be destroyed by the upper layers, make a new one + */ + nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if (nsb) { + sc->lmc_rxq[i] = nsb; + nsb->dev = dev; + sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail); + /* Transferred to 21140 below */ + } + else { + /* + * We've run out of memory, stop trying to allocate + * memory and exit the interrupt handler + * + * The chip may run out of receivers and stop + * in which care we'll try to allocate the buffer + * again. (once a second) + */ + sc->stats.rx_BuffAllocErr++; + LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); + sc->failed_recv_alloc = 1; + goto skip_out_of_mem; + } + } + else { + nsb = dev_alloc_skb(len); + if(!nsb) { + goto give_it_anyways; + } + memcpy(skb_put(nsb, len), skb->data, len); + + nsb->protocol = lmc_proto_type(sc, skb); + nsb->mac.raw = nsb->data; +// nsb->nh.raw = nsb->data; + nsb->dev = dev; + lmc_proto_netif(sc, nsb); + } + + skip_packet: + LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); + sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4; + + sc->lmc_next_rx++; + i = sc->lmc_next_rx % LMC_RXDESCS; + rx_work_limit--; + if (rx_work_limit < 0) + break; + } + + /* detect condition for LMC1000 where DSU cable attaches and fills + * descriptors with bogus packets + * + if (localLengthErrCnt > LMC_RXDESCS - 3) { + sc->stats.rx_BadPktSurgeCnt++; + LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, + localLengthErrCnt, + sc->stats.rx_BadPktSurgeCnt); + } */ + + /* save max count of receive descriptors serviced */ + if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) { + sc->stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ + } + +#ifdef DEBUG + if (rxIntLoopCnt == 0) + { + for (i = 0; i < LMC_RXDESCS; i++) + { + if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT) + != DESC_OWNED_BY_DC21X4) + { + rxIntLoopCnt++; + } + } + LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0); + } +#endif + + + lmc_led_off(sc, LMC_DS3_LED3); + +skip_out_of_mem: + + lmc_trace(dev, "lmc_rx out"); + + return 0; +} + +static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + unsigned long flags; + + lmc_trace(dev, "lmc_get_stats in"); + + + spin_lock_irqsave(&sc->lmc_lock, flags); + + sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_get_stats out"); + + return (struct net_device_stats *) &sc->stats; +} + +static struct pci_driver lmc_driver = { + .name = "lmc", + .id_table = lmc_pci_tbl, + .probe = lmc_init_one, + .remove = __devexit_p(lmc_remove_one), +}; + +static int __init init_lmc(void) +{ + return pci_module_init(&lmc_driver); +} + +static void __exit exit_lmc(void) +{ + pci_unregister_driver(&lmc_driver); +} + +module_init(init_lmc); +module_exit(exit_lmc); + +unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/ +{ + int i; + int command = (0xf6 << 10) | (devaddr << 5) | regno; + int retval = 0; + + lmc_trace(sc->lmc_device, "lmc_mii_readreg in"); + + LMC_MII_SYNC (sc); + + lmc_trace(sc->lmc_device, "lmc_mii_readreg: done sync"); + + for (i = 15; i >= 0; i--) + { + int dataval = (command & (1 << i)) ? 0x20000 : 0; + + LMC_CSR_WRITE (sc, csr_9, dataval); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + } + + lmc_trace(sc->lmc_device, "lmc_mii_readreg: done1"); + + for (i = 19; i > 0; i--) + { + LMC_CSR_WRITE (sc, csr_9, 0x40000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0); + LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + } + + lmc_trace(sc->lmc_device, "lmc_mii_readreg out"); + + return (retval >> 1) & 0xffff; +} + +void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/ +{ + int i = 32; + int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data; + + lmc_trace(sc->lmc_device, "lmc_mii_writereg in"); + + LMC_MII_SYNC (sc); + + i = 31; + while (i >= 0) + { + int datav; + + if (command & (1 << i)) + datav = 0x20000; + else + datav = 0x00000; + + LMC_CSR_WRITE (sc, csr_9, datav); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000)); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + i--; + } + + i = 2; + while (i > 0) + { + LMC_CSR_WRITE (sc, csr_9, 0x40000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, 0x50000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + i--; + } + + lmc_trace(sc->lmc_device, "lmc_mii_writereg out"); +} + +static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ +{ + int i; + + lmc_trace(sc->lmc_device, "lmc_softreset in"); + + /* Initialize the receive rings and buffers. */ + sc->lmc_txfull = 0; + sc->lmc_next_rx = 0; + sc->lmc_next_tx = 0; + sc->lmc_taint_rx = 0; + sc->lmc_taint_tx = 0; + + /* + * Setup each one of the receiver buffers + * allocate an skbuff for each one, setup the descriptor table + * and point each buffer at the next one + */ + + for (i = 0; i < LMC_RXDESCS; i++) + { + struct sk_buff *skb; + + if (sc->lmc_rxq[i] == NULL) + { + skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if(skb == NULL){ + printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name); + sc->failed_ring = 1; + break; + } + else{ + sc->lmc_rxq[i] = skb; + } + } + else + { + skb = sc->lmc_rxq[i]; + } + + skb->dev = sc->lmc_device; + + /* owned by 21140 */ + sc->lmc_rxring[i].status = 0x80000000; + + /* used to be PKT_BUF_SZ now uses skb since we lose some to head room */ + sc->lmc_rxring[i].length = skb->end - skb->data; + + /* use to be tail which is dumb since you're thinking why write + * to the end of the packj,et but since there's nothing there tail == data + */ + sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data); + + /* This is fair since the structure is static and we have the next address */ + sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]); + + } + + /* + * Sets end of ring + */ + sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */ + sc->lmc_rxring[i - 1].buffer2 = virt_to_bus (&sc->lmc_rxring[0]); /* Point back to the start */ + LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */ + + + /* Initialize the transmit rings and buffers */ + for (i = 0; i < LMC_TXDESCS; i++) + { + if (sc->lmc_txq[i] != NULL){ /* have buffer */ + dev_kfree_skb(sc->lmc_txq[i]); /* free it */ + sc->stats.tx_dropped++; /* We just dropped a packet */ + } + sc->lmc_txq[i] = NULL; + sc->lmc_txring[i].status = 0x00000000; + sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]); + } + sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]); + LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring)); + + lmc_trace(sc->lmc_device, "lmc_softreset out"); +} + +void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in"); + sc->lmc_gpio_io &= ~bits; + LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); + lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out"); +} + +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in"); + sc->lmc_gpio_io |= bits; + LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); + lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out"); +} + +void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_led_on in"); + if((~sc->lmc_miireg16) & led){ /* Already on! */ + lmc_trace(sc->lmc_device, "lmc_led_on aon out"); + return; + } + + sc->lmc_miireg16 &= ~led; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + lmc_trace(sc->lmc_device, "lmc_led_on out"); +} + +void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_led_off in"); + if(sc->lmc_miireg16 & led){ /* Already set don't do anything */ + lmc_trace(sc->lmc_device, "lmc_led_off aoff out"); + return; + } + + sc->lmc_miireg16 |= led; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + lmc_trace(sc->lmc_device, "lmc_led_off out"); +} + +static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_reset in"); + sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + /* + * make some of the GPIO pins be outputs + */ + lmc_gpio_mkoutput(sc, LMC_GEP_RESET); + + /* + * RESET low to force state reset. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + sc->lmc_gpio &= ~(LMC_GEP_RESET); + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, LMC_GEP_RESET); + + /* + * Call media specific init routine + */ + sc->lmc_media->init(sc); + + sc->stats.resetCount++; + lmc_trace(sc->lmc_device, "lmc_reset out"); +} + +static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/ +{ + u_int32_t val; + lmc_trace(sc->lmc_device, "lmc_dec_reset in"); + + /* + * disable all interrupts + */ + sc->lmc_intrmask = 0; + LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask); + + /* + * Reset the chip with a software reset command. + * Wait 10 microseconds (actually 50 PCI cycles but at + * 33MHz that comes to two microseconds but wait a + * bit longer anyways) + */ + LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET); + udelay(25); +#ifdef __sparc__ + sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode); + sc->lmc_busmode = 0x00100000; + sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET; + LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode); +#endif + sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command); + + /* + * We want: + * no ethernet address in frames we write + * disable padding (txdesc, padding disable) + * ignore runt frames (rdes0 bit 15) + * no receiver watchdog or transmitter jabber timer + * (csr15 bit 0,14 == 1) + * if using 16-bit CRC, turn off CRC (trans desc, crc disable) + */ + + sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS + | TULIP_CMD_FULLDUPLEX + | TULIP_CMD_PASSBADPKT + | TULIP_CMD_NOHEARTBEAT + | TULIP_CMD_PORTSELECT + | TULIP_CMD_RECEIVEALL + | TULIP_CMD_MUSTBEONE + ); + sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE + | TULIP_CMD_THRESHOLDCTL + | TULIP_CMD_STOREFWD + | TULIP_CMD_TXTHRSHLDCTL + ); + + LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode); + + /* + * disable receiver watchdog and transmit jabber + */ + val = LMC_CSR_READ(sc, csr_sia_general); + val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE); + LMC_CSR_WRITE(sc, csr_sia_general, val); + + lmc_trace(sc->lmc_device, "lmc_dec_reset out"); +} + +static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/ + size_t csr_size) +{ + lmc_trace(sc->lmc_device, "lmc_initcsrs in"); + sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size; + sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size; + sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size; + sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size; + sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size; + sc->lmc_csrs.csr_status = csr_base + 5 * csr_size; + sc->lmc_csrs.csr_command = csr_base + 6 * csr_size; + sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size; + sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size; + sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size; + sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size; + sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size; + sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size; + sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size; + sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size; + sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size; + lmc_trace(sc->lmc_device, "lmc_initcsrs out"); +} + +static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ + lmc_softc_t *sc; + u32 csr6; + unsigned long flags; + + lmc_trace(dev, "lmc_driver_timeout in"); + + sc = dev->priv; + + spin_lock_irqsave(&sc->lmc_lock, flags); + + printk("%s: Xmitter busy|\n", dev->name); + + sc->stats.tx_tbusy_calls++ ; + if (jiffies - dev->trans_start < TX_TIMEOUT) { + goto bug_out; + } + + /* + * Chip seems to have locked up + * Reset it + * This whips out all our decriptor + * table and starts from scartch + */ + + LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO, + LMC_CSR_READ (sc, csr_status), + sc->stats.tx_ProcTimeout); + + lmc_running_reset (dev); + + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + /* restart the tx processes */ + csr6 = LMC_CSR_READ (sc, csr_command); + LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002); + LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002); + + /* immediate transmit */ + LMC_CSR_WRITE (sc, csr_txpoll, 0); + + sc->stats.tx_errors++; + sc->stats.tx_ProcTimeout++; /* -baz */ + + dev->trans_start = jiffies; + +bug_out: + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_driver_timout out"); + + +} |