aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/lmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan/lmc')
-rw-r--r--drivers/net/wan/lmc/Makefile18
-rw-r--r--drivers/net/wan/lmc/lmc.h33
-rw-r--r--drivers/net/wan/lmc/lmc_debug.c65
-rw-r--r--drivers/net/wan/lmc/lmc_debug.h52
-rw-r--r--drivers/net/wan/lmc/lmc_ioctl.h255
-rw-r--r--drivers/net/wan/lmc/lmc_main.c2008
-rw-r--r--drivers/net/wan/lmc/lmc_media.c1206
-rw-r--r--drivers/net/wan/lmc/lmc_proto.c106
-rw-r--r--drivers/net/wan/lmc/lmc_proto.h18
-rw-r--r--drivers/net/wan/lmc/lmc_var.h468
10 files changed, 0 insertions, 4229 deletions
diff --git a/drivers/net/wan/lmc/Makefile b/drivers/net/wan/lmc/Makefile
deleted file mode 100644
index f00fe4491d69..000000000000
--- a/drivers/net/wan/lmc/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Lan Media 21140 based WAN cards
-# Specifically the 1000,1200,5200,5245
-#
-
-obj-$(CONFIG_LANMEDIA) += lmc.o
-
-lmc-objs := lmc_debug.o lmc_media.o lmc_main.o lmc_proto.o
-
-# Like above except every packet gets echoed to KERN_DEBUG
-# in hex
-#
-# DBDEF = \
-# -DDEBUG \
-# -DLMC_PACKET_LOG
-
-ccflags-y := $(DBGDEF)
diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h
deleted file mode 100644
index d7d59b4595f9..000000000000
--- a/drivers/net/wan/lmc/lmc.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LMC_H_
-#define _LMC_H_
-
-#include "lmc_var.h"
-
-/*
- * prototypes for everyone
- */
-int lmc_probe(struct net_device * dev);
-unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned
- devaddr, unsigned regno);
-void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr,
- unsigned regno, unsigned data);
-void lmc_led_on(lmc_softc_t * const, u32);
-void lmc_led_off(lmc_softc_t * const, u32);
-unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned);
-void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned);
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits);
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits);
-
-int lmc_ioctl(struct net_device *dev, struct if_settings *ifs);
-
-extern lmc_media_t lmc_ds3_media;
-extern lmc_media_t lmc_ssi_media;
-extern lmc_media_t lmc_t1_media;
-extern lmc_media_t lmc_hssi_media;
-
-#ifdef _DBG_EVENTLOG
-static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
-#endif
-
-#endif
diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c
deleted file mode 100644
index 2b6051bda3fb..000000000000
--- a/drivers/net/wan/lmc/lmc_debug.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-
-#include "lmc_debug.h"
-
-/*
- * Prints out len, max to 80 octets using printk, 20 per line
- */
-#ifdef DEBUG
-#ifdef LMC_PACKET_LOG
-void lmcConsoleLog(char *type, unsigned char *ucData, int iLen)
-{
- int iNewLine = 1;
- char str[80], *pstr;
-
- sprintf(str, KERN_DEBUG "lmc: %s: ", type);
- pstr = str+strlen(str);
-
- if(iLen > 240){
- printk(KERN_DEBUG "lmc: Printing 240 chars... out of: %d\n", iLen);
- iLen = 240;
- }
- else{
- printk(KERN_DEBUG "lmc: Printing %d chars\n", iLen);
- }
-
- while(iLen > 0)
- {
- sprintf(pstr, "%02x ", *ucData);
- pstr+=3;
- ucData++;
- if( !(iNewLine % 20))
- {
- sprintf(pstr, "\n");
- printk(str);
- sprintf(str, KERN_DEBUG "lmc: %s: ", type);
- pstr=str+strlen(str);
- }
- iNewLine++;
- iLen--;
- }
- sprintf(pstr, "\n");
- printk(str);
-}
-#endif
-#endif
-
-#ifdef DEBUG
-u32 lmcEventLogIndex;
-u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
-
-void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3)
-{
- lmcEventLogBuf[lmcEventLogIndex++] = EventNum;
- lmcEventLogBuf[lmcEventLogIndex++] = arg2;
- lmcEventLogBuf[lmcEventLogIndex++] = arg3;
- lmcEventLogBuf[lmcEventLogIndex++] = jiffies;
-
- lmcEventLogIndex &= (LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS) - 1;
-}
-#endif /* DEBUG */
-
-/* --------------------------- end if_lmc_linux.c ------------------------ */
diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h
deleted file mode 100644
index cfae9eddf003..000000000000
--- a/drivers/net/wan/lmc/lmc_debug.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LMC_DEBUG_H_
-#define _LMC_DEBUG_H_
-
-#ifdef DEBUG
-#ifdef LMC_PACKET_LOG
-#define LMC_CONSOLE_LOG(x,y,z) lmcConsoleLog((x), (y), (z))
-#else
-#define LMC_CONSOLE_LOG(x,y,z)
-#endif
-#else
-#define LMC_CONSOLE_LOG(x,y,z)
-#endif
-
-
-
-/* Debug --- Event log definitions --- */
-/* EVENTLOGSIZE*EVENTLOGARGS needs to be a power of 2 */
-#define LMC_EVENTLOGSIZE 1024 /* number of events in eventlog */
-#define LMC_EVENTLOGARGS 4 /* number of args for each event */
-
-/* event indicators */
-#define LMC_EVENT_XMT 1
-#define LMC_EVENT_XMTEND 2
-#define LMC_EVENT_XMTINT 3
-#define LMC_EVENT_RCVINT 4
-#define LMC_EVENT_RCVEND 5
-#define LMC_EVENT_INT 6
-#define LMC_EVENT_XMTINTTMO 7
-#define LMC_EVENT_XMTPRCTMO 8
-#define LMC_EVENT_INTEND 9
-#define LMC_EVENT_RESET1 10
-#define LMC_EVENT_RESET2 11
-#define LMC_EVENT_FORCEDRESET 12
-#define LMC_EVENT_WATCHDOG 13
-#define LMC_EVENT_BADPKTSURGE 14
-#define LMC_EVENT_TBUSY0 15
-#define LMC_EVENT_TBUSY1 16
-
-
-#ifdef DEBUG
-extern u32 lmcEventLogIndex;
-extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS];
-#define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z))
-#else
-#define LMC_EVENT_LOG(x,y,z)
-#endif /* end ifdef _DBG_EVENTLOG */
-
-void lmcConsoleLog(char *type, unsigned char *ucData, int iLen);
-void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3);
-
-#endif
diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h
deleted file mode 100644
index 8c65e2176e94..000000000000
--- a/drivers/net/wan/lmc/lmc_ioctl.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef _LMC_IOCTL_H_
-#define _LMC_IOCTL_H_
-/* $Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $ */
-
- /*
- * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
- * All rights reserved. www.lanmedia.com
- *
- * This code is written by:
- * Andrew Stanley-Jones (asj@cban.com)
- * Rob Braun (bbraun@vix.com),
- * Michael Graff (explorer@vix.com) and
- * Matt Thomas (matt@3am-software.com).
- */
-
-#define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */
-#define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */
-#define LMCIOCGETLMCSTATS SIOCDEVPRIVATE+5
-#define LMCIOCCLEARLMCSTATS SIOCDEVPRIVATE+6
-#define LMCIOCDUMPEVENTLOG SIOCDEVPRIVATE+7
-#define LMCIOCGETXINFO SIOCDEVPRIVATE+8
-#define LMCIOCSETCIRCUIT SIOCDEVPRIVATE+9
-#define LMCIOCUNUSEDATM SIOCDEVPRIVATE+10
-#define LMCIOCRESET SIOCDEVPRIVATE+11
-#define LMCIOCT1CONTROL SIOCDEVPRIVATE+12
-#define LMCIOCIFTYPE SIOCDEVPRIVATE+13
-#define LMCIOCXILINX SIOCDEVPRIVATE+14
-
-#define LMC_CARDTYPE_UNKNOWN -1
-#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */
-#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */
-#define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */
-#define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */
-
-#define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */
-#define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */
-#define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */
-#define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */
-
-#define LMC_CTL_OFF 0 /* generic OFF value */
-#define LMC_CTL_ON 1 /* generic ON value */
-
-#define LMC_CTL_CLOCK_SOURCE_EXT 0 /* clock off line */
-#define LMC_CTL_CLOCK_SOURCE_INT 1 /* internal clock */
-
-#define LMC_CTL_CRC_LENGTH_16 16
-#define LMC_CTL_CRC_LENGTH_32 32
-#define LMC_CTL_CRC_BYTESIZE_2 2
-#define LMC_CTL_CRC_BYTESIZE_4 4
-
-
-#define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */
-#define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */
-
-#define LMC_CTL_CIRCUIT_TYPE_E1 0
-#define LMC_CTL_CIRCUIT_TYPE_T1 1
-
-/*
- * IFTYPE defines
- */
-#define LMC_PPP 1 /* use generic HDLC interface */
-#define LMC_NET 2 /* use direct net interface */
-#define LMC_RAW 3 /* use direct net interface */
-
-/*
- * These are not in the least IOCTL related, but I want them common.
- */
-/*
- * assignments for the GPIO register on the DEC chip (common)
- */
-#define LMC_GEP_INIT 0x01 /* 0: */
-#define LMC_GEP_RESET 0x02 /* 1: */
-#define LMC_GEP_MODE 0x10 /* 4: */
-#define LMC_GEP_DP 0x20 /* 5: */
-#define LMC_GEP_DATA 0x40 /* 6: serial out */
-#define LMC_GEP_CLK 0x80 /* 7: serial clock */
-
-/*
- * HSSI GPIO assignments
- */
-#define LMC_GEP_HSSI_ST 0x04 /* 2: receive timing sense (deprecated) */
-#define LMC_GEP_HSSI_CLOCK 0x08 /* 3: clock source */
-
-/*
- * T1 GPIO assignments
- */
-#define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */
-#define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */
-
-/*
- * Common MII16 bits
- */
-#define LMC_MII16_LED0 0x0080
-#define LMC_MII16_LED1 0x0100
-#define LMC_MII16_LED2 0x0200
-#define LMC_MII16_LED3 0x0400 /* Error, and the red one */
-#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */
-#define LMC_MII16_FIFO_RESET 0x0800
-
-/*
- * definitions for HSSI
- */
-#define LMC_MII16_HSSI_TA 0x0001
-#define LMC_MII16_HSSI_CA 0x0002
-#define LMC_MII16_HSSI_LA 0x0004
-#define LMC_MII16_HSSI_LB 0x0008
-#define LMC_MII16_HSSI_LC 0x0010
-#define LMC_MII16_HSSI_TM 0x0020
-#define LMC_MII16_HSSI_CRC 0x0040
-
-/*
- * assignments for the MII register 16 (DS3)
- */
-#define LMC_MII16_DS3_ZERO 0x0001
-#define LMC_MII16_DS3_TRLBK 0x0002
-#define LMC_MII16_DS3_LNLBK 0x0004
-#define LMC_MII16_DS3_RAIS 0x0008
-#define LMC_MII16_DS3_TAIS 0x0010
-#define LMC_MII16_DS3_BIST 0x0020
-#define LMC_MII16_DS3_DLOS 0x0040
-#define LMC_MII16_DS3_CRC 0x1000
-#define LMC_MII16_DS3_SCRAM 0x2000
-#define LMC_MII16_DS3_SCRAM_LARS 0x4000
-
-/* Note: 2 pairs of LEDs where swapped by mistake
- * in Xilinx code for DS3 & DS1 adapters */
-#define LMC_DS3_LED0 0x0100 /* bit 08 yellow */
-#define LMC_DS3_LED1 0x0080 /* bit 07 blue */
-#define LMC_DS3_LED2 0x0400 /* bit 10 green */
-#define LMC_DS3_LED3 0x0200 /* bit 09 red */
-
-/*
- * framer register 0 and 7 (7 is latched and reset on read)
- */
-#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */
-#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */
-#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */
-#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */
-#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */
-
-/*
- * Framer register 9 contains the blue alarm signal
- */
-#define LMC_FRAMER_REG9_RBLUE 0x02 /* Blue alarm failure */
-
-/*
- * Framer register 0x10 contains xbit error
- */
-#define LMC_FRAMER_REG10_XBIT 0x01 /* X bit error alarm failure */
-
-/*
- * And SSI, LMC1000
- */
-#define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */
-#define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */
-#define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */
-#define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */
-#define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */
-#define LMC_MII16_SSI_RI 0x0020 /* RI input RO */
-#define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */
-
-/*
- * bits 0x0080 through 0x0800 are generic, and described
- * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET
- */
-#define LMC_MII16_SSI_LL 0x1000 /* LL output RW */
-#define LMC_MII16_SSI_RL 0x2000 /* RL output RW */
-#define LMC_MII16_SSI_TM 0x4000 /* TM input RO */
-#define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */
-
-/*
- * Some of the MII16 bits are mirrored in the MII17 register as well,
- * but let's keep thing separate for now, and get only the cable from
- * the MII17.
- */
-#define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */
-#define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */
-
-/*
- * And T1, LMC1200
- */
-#define LMC_MII16_T1_UNUSED1 0x0003
-#define LMC_MII16_T1_XOE 0x0004
-#define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */
-#define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */
-#define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */
-#define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */
-
-#define LMC_MII16_T1_LED0 0x0100
-#define LMC_MII16_T1_LED1 0x0080
-#define LMC_MII16_T1_LED2 0x0400
-#define LMC_MII16_T1_LED3 0x0200
-#define LMC_MII16_T1_FIFO_RESET 0x0800
-
-#define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */
-#define LMC_MII16_T1_UNUSED2 0xe000
-
-
-/* 8370 framer registers */
-
-#define T1FRAMER_ALARM1_STATUS 0x47
-#define T1FRAMER_ALARM2_STATUS 0x48
-#define T1FRAMER_FERR_LSB 0x50
-#define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */
-#define T1FRAMER_LCV_LSB 0x54
-#define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */
-#define T1FRAMER_AERR 0x5A
-
-/* mask for the above AERR register */
-#define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */
-#define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */
-#define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */
-
-/* 8370 framer register ALM1 (0x47) values
- * used to determine link status
- */
-
-#define T1F_SIGFRZ 0x01 /* signaling freeze */
-#define T1F_RLOF 0x02 /* receive loss of frame alignment */
-#define T1F_RLOS 0x04 /* receive loss of signal */
-#define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */
-#define T1F_RAIS 0x10 /* receive alarm indication signal */
-#define T1F_UNUSED 0x20
-#define T1F_RYEL 0x40 /* receive yellow alarm */
-#define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */
-
-#define LMC_T1F_WRITE 0
-#define LMC_T1F_READ 1
-
-typedef struct lmc_st1f_control {
- int command;
- int address;
- int value;
- char __user *data;
-} lmc_t1f_control;
-
-enum lmc_xilinx_c {
- lmc_xilinx_reset = 1,
- lmc_xilinx_load_prom = 2,
- lmc_xilinx_load = 3
-};
-
-struct lmc_xilinx_control {
- enum lmc_xilinx_c command;
- int len;
- char __user *data;
-};
-
-/* ------------------ end T1 defs ------------------- */
-
-#define LMC_MII_LedMask 0x0780
-#define LMC_MII_LedBitPos 7
-
-#endif
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
deleted file mode 100644
index ed687bf6ec47..000000000000
--- a/drivers/net/wan/lmc/lmc_main.c
+++ /dev/null
@@ -1,2008 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
- /*
- * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
- * All rights reserved. www.lanmedia.com
- * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This code is written by:
- * Andrew Stanley-Jones (asj@cban.com)
- * Rob Braun (bbraun@vix.com),
- * Michael Graff (explorer@vix.com) and
- * Matt Thomas (matt@3am-software.com).
- *
- * With Help By:
- * David Boggs
- * Ron Crane
- * Alan Cox
- *
- * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards.
- *
- * To control link specific options lmcctl is required.
- * It can be obtained from ftp.lanmedia.com.
- *
- * Linux driver notes:
- * Linux uses the device struct lmc_private to pass private information
- * around.
- *
- * The initialization portion of this driver (the lmc_reset() and the
- * lmc_dec_reset() functions, as well as the led controls and the
- * lmc_initcsrs() functions.
- *
- * The watchdog function runs every second and checks to see if
- * we still have link, and that the timing source is what we expected
- * it to be. If link is lost, the interface is marked down, and
- * we no longer can transmit.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hdlc.h>
-#include <linux/in.h>
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/inet.h>
-#include <linux/bitops.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-//#include <asm/spinlock.h>
-
-#define DRIVER_MAJOR_VERSION 1
-#define DRIVER_MINOR_VERSION 34
-#define DRIVER_SUB_VERSION 0
-
-#define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION)
-
-#include "lmc.h"
-#include "lmc_var.h"
-#include "lmc_ioctl.h"
-#include "lmc_debug.h"
-#include "lmc_proto.h"
-
-static int LMC_PKT_BUF_SZ = 1542;
-
-static const struct pci_device_id lmc_pci_tbl[] = {
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
- PCI_VENDOR_ID_LMC, PCI_ANY_ID },
- { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
- PCI_ANY_ID, PCI_VENDOR_ID_LMC },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
-MODULE_LICENSE("GPL v2");
-
-
-static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static int lmc_rx (struct net_device *dev);
-static int lmc_open(struct net_device *dev);
-static int lmc_close(struct net_device *dev);
-static struct net_device_stats *lmc_get_stats(struct net_device *dev);
-static irqreturn_t lmc_interrupt(int irq, void *dev_instance);
-static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size);
-static void lmc_softreset(lmc_softc_t * const);
-static void lmc_running_reset(struct net_device *dev);
-static int lmc_ifdown(struct net_device * const);
-static void lmc_watchdog(struct timer_list *t);
-static void lmc_reset(lmc_softc_t * const sc);
-static void lmc_dec_reset(lmc_softc_t * const sc);
-static void lmc_driver_timeout(struct net_device *dev, unsigned int txqueue);
-
-/*
- * linux reserves 16 device specific IOCTLs. We call them
- * LMCIOC* to control various bits of our world.
- */
-static int lmc_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
- void __user *data, int cmd) /*fold00*/
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- lmc_ctl_t ctl;
- int ret = -EOPNOTSUPP;
- u16 regVal;
- unsigned long flags;
-
- /*
- * Most functions mess with the structure
- * Disable interrupts while we do the polling
- */
-
- switch (cmd) {
- /*
- * Return current driver state. Since we keep this up
- * To date internally, just copy this out to the user.
- */
- case LMCIOCGINFO: /*fold01*/
- if (copy_to_user(data, &sc->ictl, sizeof(lmc_ctl_t)))
- ret = -EFAULT;
- else
- ret = 0;
- break;
-
- case LMCIOCSINFO: /*fold01*/
- if (!capable(CAP_NET_ADMIN)) {
- ret = -EPERM;
- break;
- }
-
- if(dev->flags & IFF_UP){
- ret = -EBUSY;
- break;
- }
-
- if (copy_from_user(&ctl, data, sizeof(lmc_ctl_t))) {
- ret = -EFAULT;
- break;
- }
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
- sc->lmc_media->set_status (sc, &ctl);
-
- if(ctl.crc_length != sc->ictl.crc_length) {
- sc->lmc_media->set_crc_length(sc, ctl.crc_length);
- if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16)
- sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
- else
- sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
- }
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- ret = 0;
- break;
-
- case LMCIOCIFTYPE: /*fold01*/
- {
- u16 old_type = sc->if_type;
- u16 new_type;
-
- if (!capable(CAP_NET_ADMIN)) {
- ret = -EPERM;
- break;
- }
-
- if (copy_from_user(&new_type, data, sizeof(u16))) {
- ret = -EFAULT;
- break;
- }
-
-
- if (new_type == old_type)
- {
- ret = 0 ;
- break; /* no change */
- }
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
- lmc_proto_close(sc);
-
- sc->if_type = new_type;
- lmc_proto_attach(sc);
- ret = lmc_proto_open(sc);
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
- break;
- }
-
- case LMCIOCGETXINFO: /*fold01*/
- spin_lock_irqsave(&sc->lmc_lock, flags);
- sc->lmc_xinfo.Magic0 = 0xBEEFCAFE;
-
- sc->lmc_xinfo.PciCardType = sc->lmc_cardtype;
- sc->lmc_xinfo.PciSlotNumber = 0;
- sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION;
- sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION;
- sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION;
- sc->lmc_xinfo.XilinxRevisionNumber =
- lmc_mii_readreg (sc, 0, 3) & 0xf;
- sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ;
- sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc);
- sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16);
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
-
- if (copy_to_user(data, &sc->lmc_xinfo, sizeof(struct lmc_xinfo)))
- ret = -EFAULT;
- else
- ret = 0;
-
- break;
-
- case LMCIOCGETLMCSTATS:
- spin_lock_irqsave(&sc->lmc_lock, flags);
- if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
- lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
- sc->extra_stats.framingBitErrorCount +=
- lmc_mii_readreg(sc, 0, 18) & 0xff;
- lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
- sc->extra_stats.framingBitErrorCount +=
- (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
- lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
- sc->extra_stats.lineCodeViolationCount +=
- lmc_mii_readreg(sc, 0, 18) & 0xff;
- lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
- sc->extra_stats.lineCodeViolationCount +=
- (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
- lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
- regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
-
- sc->extra_stats.lossOfFrameCount +=
- (regVal & T1FRAMER_LOF_MASK) >> 4;
- sc->extra_stats.changeOfFrameAlignmentCount +=
- (regVal & T1FRAMER_COFA_MASK) >> 2;
- sc->extra_stats.severelyErroredFrameCount +=
- regVal & T1FRAMER_SEF_MASK;
- }
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
- if (copy_to_user(data, &sc->lmc_device->stats,
- sizeof(sc->lmc_device->stats)) ||
- copy_to_user(data + sizeof(sc->lmc_device->stats),
- &sc->extra_stats, sizeof(sc->extra_stats)))
- ret = -EFAULT;
- else
- ret = 0;
- break;
-
- case LMCIOCCLEARLMCSTATS:
- if (!capable(CAP_NET_ADMIN)) {
- ret = -EPERM;
- break;
- }
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
- memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
- memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
- sc->extra_stats.check = STATCHECK;
- sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
- sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
- sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
- ret = 0;
- break;
-
- case LMCIOCSETCIRCUIT: /*fold01*/
- if (!capable(CAP_NET_ADMIN)){
- ret = -EPERM;
- break;
- }
-
- if(dev->flags & IFF_UP){
- ret = -EBUSY;
- break;
- }
-
- if (copy_from_user(&ctl, data, sizeof(lmc_ctl_t))) {
- ret = -EFAULT;
- break;
- }
- spin_lock_irqsave(&sc->lmc_lock, flags);
- sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
- sc->ictl.circuit_type = ctl.circuit_type;
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
- ret = 0;
-
- break;
-
- case LMCIOCRESET: /*fold01*/
- if (!capable(CAP_NET_ADMIN)){
- ret = -EPERM;
- break;
- }
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
- /* Reset driver and bring back to current state */
- printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
- lmc_running_reset (dev);
- printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
-
- LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- ret = 0;
- break;
-
-#ifdef DEBUG
- case LMCIOCDUMPEVENTLOG:
- if (copy_to_user(data, &lmcEventLogIndex, sizeof(u32))) {
- ret = -EFAULT;
- break;
- }
- if (copy_to_user(data + sizeof(u32), lmcEventLogBuf,
- sizeof(lmcEventLogBuf)))
- ret = -EFAULT;
- else
- ret = 0;
-
- break;
-#endif /* end ifdef _DBG_EVENTLOG */
- case LMCIOCT1CONTROL: /*fold01*/
- if (sc->lmc_cardtype != LMC_CARDTYPE_T1){
- ret = -EOPNOTSUPP;
- break;
- }
- break;
- case LMCIOCXILINX: /*fold01*/
- {
- struct lmc_xilinx_control xc; /*fold02*/
-
- if (!capable(CAP_NET_ADMIN)){
- ret = -EPERM;
- break;
- }
-
- /*
- * Stop the xwitter whlie we restart the hardware
- */
- netif_stop_queue(dev);
-
- if (copy_from_user(&xc, data, sizeof(struct lmc_xilinx_control))) {
- ret = -EFAULT;
- break;
- }
- switch(xc.command){
- case lmc_xilinx_reset: /*fold02*/
- {
- spin_lock_irqsave(&sc->lmc_lock, flags);
- lmc_mii_readreg (sc, 0, 16);
-
- /*
- * Make all of them 0 and make input
- */
- lmc_gpio_mkinput(sc, 0xff);
-
- /*
- * make the reset output
- */
- lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
-
- /*
- * RESET low to force configuration. This also forces
- * the transmitter clock to be internal, but we expect to reset
- * that later anyway.
- */
-
- sc->lmc_gpio &= ~LMC_GEP_RESET;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
-
- /*
- * hold for more than 10 microseconds
- */
- udelay(50);
-
- sc->lmc_gpio |= LMC_GEP_RESET;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
-
- /*
- * stop driving Xilinx-related signals
- */
- lmc_gpio_mkinput(sc, 0xff);
-
- /* Reset the frammer hardware */
- sc->lmc_media->set_link_status (sc, 1);
- sc->lmc_media->set_status (sc, NULL);
-// lmc_softreset(sc);
-
- {
- int i;
- for(i = 0; i < 5; i++){
- lmc_led_on(sc, LMC_DS3_LED0);
- mdelay(100);
- lmc_led_off(sc, LMC_DS3_LED0);
- lmc_led_on(sc, LMC_DS3_LED1);
- mdelay(100);
- lmc_led_off(sc, LMC_DS3_LED1);
- lmc_led_on(sc, LMC_DS3_LED3);
- mdelay(100);
- lmc_led_off(sc, LMC_DS3_LED3);
- lmc_led_on(sc, LMC_DS3_LED2);
- mdelay(100);
- lmc_led_off(sc, LMC_DS3_LED2);
- }
- }
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
-
-
- ret = 0x0;
-
- }
-
- break;
- case lmc_xilinx_load_prom: /*fold02*/
- {
- int timeout = 500000;
- spin_lock_irqsave(&sc->lmc_lock, flags);
- lmc_mii_readreg (sc, 0, 16);
-
- /*
- * Make all of them 0 and make input
- */
- lmc_gpio_mkinput(sc, 0xff);
-
- /*
- * make the reset output
- */
- lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET);
-
- /*
- * RESET low to force configuration. This also forces
- * the transmitter clock to be internal, but we expect to reset
- * that later anyway.
- */
-
- sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP);
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
-
- /*
- * hold for more than 10 microseconds
- */
- udelay(50);
-
- sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
- /*
- * busy wait for the chip to reset
- */
- while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
- (timeout-- > 0))
- cpu_relax();
-
-
- /*
- * stop driving Xilinx-related signals
- */
- lmc_gpio_mkinput(sc, 0xff);
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- ret = 0x0;
-
-
- break;
-
- }
-
- case lmc_xilinx_load: /*fold02*/
- {
- char *data;
- int pos;
- int timeout = 500000;
-
- if (!xc.data) {
- ret = -EINVAL;
- break;
- }
-
- data = memdup_user(xc.data, xc.len);
- if (IS_ERR(data)) {
- ret = PTR_ERR(data);
- break;
- }
-
- printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data);
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
- lmc_gpio_mkinput(sc, 0xff);
-
- /*
- * Clear the Xilinx and start prgramming from the DEC
- */
-
- /*
- * Set ouput as:
- * Reset: 0 (active)
- * DP: 0 (active)
- * Mode: 1
- *
- */
- sc->lmc_gpio = 0x00;
- sc->lmc_gpio &= ~LMC_GEP_DP;
- sc->lmc_gpio &= ~LMC_GEP_RESET;
- sc->lmc_gpio |= LMC_GEP_MODE;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
- lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET);
-
- /*
- * Wait at least 10 us 20 to be safe
- */
- udelay(50);
-
- /*
- * Clear reset and activate programming lines
- * Reset: Input
- * DP: Input
- * Clock: Output
- * Data: Output
- * Mode: Output
- */
- lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET);
-
- /*
- * Set LOAD, DATA, Clock to 1
- */
- sc->lmc_gpio = 0x00;
- sc->lmc_gpio |= LMC_GEP_MODE;
- sc->lmc_gpio |= LMC_GEP_DATA;
- sc->lmc_gpio |= LMC_GEP_CLK;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
- lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE );
-
- /*
- * busy wait for the chip to reset
- */
- while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
- (timeout-- > 0))
- cpu_relax();
-
- printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout);
-
- for(pos = 0; pos < xc.len; pos++){
- switch(data[pos]){
- case 0:
- sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */
- break;
- case 1:
- sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */
- break;
- default:
- printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]);
- sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */
- }
- sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */
- sc->lmc_gpio |= LMC_GEP_MODE;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
- udelay(1);
-
- sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */
- sc->lmc_gpio |= LMC_GEP_MODE;
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
- udelay(1);
- }
- if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){
- printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name);
- }
- else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){
- printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name);
- }
- else {
- printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos);
- }
-
- lmc_gpio_mkinput(sc, 0xff);
-
- sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
-
- sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- kfree(data);
-
- ret = 0;
-
- break;
- }
- default: /*fold02*/
- ret = -EBADE;
- break;
- }
-
- netif_wake_queue(dev);
- sc->lmc_txfull = 0;
-
- }
- break;
- default:
- break;
- }
-
- return ret;
-}
-
-
-/* the watchdog process that cruises around */
-static void lmc_watchdog(struct timer_list *t) /*fold00*/
-{
- lmc_softc_t *sc = from_timer(sc, t, timer);
- struct net_device *dev = sc->lmc_device;
- int link_status;
- u32 ticks;
- unsigned long flags;
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
-
- if(sc->check != 0xBEAFCAFE){
- printk("LMC: Corrupt net_device struct, breaking out\n");
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
- return;
- }
-
-
- /* Make sure the tx jabber and rx watchdog are off,
- * and the transmit and receive processes are running.
- */
-
- LMC_CSR_WRITE (sc, csr_15, 0x00000011);
- sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN;
- LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
-
- if (sc->lmc_ok == 0)
- goto kick_timer;
-
- LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
-
- /* --- begin time out check -----------------------------------
- * check for a transmit interrupt timeout
- * Has the packet xmt vs xmt serviced threshold been exceeded */
- if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
- sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
- sc->tx_TimeoutInd == 0)
- {
-
- /* wait for the watchdog to come around again */
- sc->tx_TimeoutInd = 1;
- }
- else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
- sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
- sc->tx_TimeoutInd)
- {
-
- LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
-
- sc->tx_TimeoutDisplay = 1;
- sc->extra_stats.tx_TimeoutCnt++;
-
- /* DEC chip is stuck, hit it with a RESET!!!! */
- lmc_running_reset (dev);
-
-
- /* look at receive & transmit process state to make sure they are running */
- LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
-
- /* look at: DSR - 02 for Reg 16
- * CTS - 08
- * DCD - 10
- * RI - 20
- * for Reg 17
- */
- LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17));
-
- /* reset the transmit timeout detection flag */
- sc->tx_TimeoutInd = 0;
- sc->lastlmc_taint_tx = sc->lmc_taint_tx;
- sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
- } else {
- sc->tx_TimeoutInd = 0;
- sc->lastlmc_taint_tx = sc->lmc_taint_tx;
- sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
- }
-
- /* --- end time out check ----------------------------------- */
-
-
- link_status = sc->lmc_media->get_link_status (sc);
-
- /*
- * hardware level link lost, but the interface is marked as up.
- * Mark it as down.
- */
- if ((link_status == 0) && (sc->last_link_status != 0)) {
- printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name);
- sc->last_link_status = 0;
- /* lmc_reset (sc); Why reset??? The link can go down ok */
-
- /* Inform the world that link has been lost */
- netif_carrier_off(dev);
- }
-
- /*
- * hardware link is up, but the interface is marked as down.
- * Bring it back up again.
- */
- if (link_status != 0 && sc->last_link_status == 0) {
- printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name);
- sc->last_link_status = 1;
- /* lmc_reset (sc); Again why reset??? */
-
- netif_carrier_on(dev);
- }
-
- /* Call media specific watchdog functions */
- sc->lmc_media->watchdog(sc);
-
- /*
- * Poke the transmitter to make sure it
- * never stops, even if we run out of mem
- */
- LMC_CSR_WRITE(sc, csr_rxpoll, 0);
-
- /*
- * Check for code that failed
- * and try and fix it as appropriate
- */
- if(sc->failed_ring == 1){
- /*
- * Failed to setup the recv/xmit rin
- * Try again
- */
- sc->failed_ring = 0;
- lmc_softreset(sc);
- }
- if(sc->failed_recv_alloc == 1){
- /*
- * We failed to alloc mem in the
- * interrupt handler, go through the rings
- * and rebuild them
- */
- sc->failed_recv_alloc = 0;
- lmc_softreset(sc);
- }
-
-
- /*
- * remember the timer value
- */
-kick_timer:
-
- ticks = LMC_CSR_READ (sc, csr_gp_timer);
- LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL);
- sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff);
-
- /*
- * restart this timer.
- */
- sc->timer.expires = jiffies + (HZ);
- add_timer (&sc->timer);
-
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-}
-
-static int lmc_attach(struct net_device *dev, unsigned short encoding,
- unsigned short parity)
-{
- if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
- return 0;
- return -EINVAL;
-}
-
-static const struct net_device_ops lmc_ops = {
- .ndo_open = lmc_open,
- .ndo_stop = lmc_close,
- .ndo_start_xmit = hdlc_start_xmit,
- .ndo_siocwandev = hdlc_ioctl,
- .ndo_siocdevprivate = lmc_siocdevprivate,
- .ndo_tx_timeout = lmc_driver_timeout,
- .ndo_get_stats = lmc_get_stats,
-};
-
-static int lmc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- lmc_softc_t *sc;
- struct net_device *dev;
- u16 subdevice;
- u16 AdapModelNum;
- int err;
- static int cards_found;
-
- err = pcim_enable_device(pdev);
- if (err) {
- printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
- return err;
- }
-
- err = pci_request_regions(pdev, "lmc");
- if (err) {
- printk(KERN_ERR "lmc: pci_request_region failed\n");
- return err;
- }
-
- /*
- * Allocate our own device structure
- */
- sc = devm_kzalloc(&pdev->dev, sizeof(lmc_softc_t), GFP_KERNEL);
- if (!sc)
- return -ENOMEM;
-
- dev = alloc_hdlcdev(sc);
- if (!dev) {
- printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
- return -ENOMEM;
- }
-
-
- dev->type = ARPHRD_HDLC;
- dev_to_hdlc(dev)->xmit = lmc_start_xmit;
- dev_to_hdlc(dev)->attach = lmc_attach;
- dev->netdev_ops = &lmc_ops;
- dev->watchdog_timeo = HZ; /* 1 second */
- dev->tx_queue_len = 100;
- sc->lmc_device = dev;
- sc->name = dev->name;
- sc->if_type = LMC_PPP;
- sc->check = 0xBEAFCAFE;
- dev->base_addr = pci_resource_start(pdev, 0);
- dev->irq = pdev->irq;
- pci_set_drvdata(pdev, dev);
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- /*
- * This will get the protocol layer ready and do any 1 time init's
- * Must have a valid sc and dev structure
- */
- lmc_proto_attach(sc);
-
- /* Init the spin lock so can call it latter */
-
- spin_lock_init(&sc->lmc_lock);
- pci_set_master(pdev);
-
- printk(KERN_INFO "hdlc: detected at %lx, irq %d\n",
- dev->base_addr, dev->irq);
-
- err = register_hdlc_device(dev);
- if (err) {
- printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
- free_netdev(dev);
- return err;
- }
-
- sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
- sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
-
- /*
- *
- * Check either the subvendor or the subdevice, some systems reverse
- * the setting in the bois, seems to be version and arch dependent?
- * Fix the error, exchange the two values
- */
- if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC)
- subdevice = pdev->subsystem_vendor;
-
- switch (subdevice) {
- case PCI_DEVICE_ID_LMC_HSSI:
- printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
- sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
- sc->lmc_media = &lmc_hssi_media;
- break;
- case PCI_DEVICE_ID_LMC_DS3:
- printk(KERN_INFO "%s: LMC DS3\n", dev->name);
- sc->lmc_cardtype = LMC_CARDTYPE_DS3;
- sc->lmc_media = &lmc_ds3_media;
- break;
- case PCI_DEVICE_ID_LMC_SSI:
- printk(KERN_INFO "%s: LMC SSI\n", dev->name);
- sc->lmc_cardtype = LMC_CARDTYPE_SSI;
- sc->lmc_media = &lmc_ssi_media;
- break;
- case PCI_DEVICE_ID_LMC_T1:
- printk(KERN_INFO "%s: LMC T1\n", dev->name);
- sc->lmc_cardtype = LMC_CARDTYPE_T1;
- sc->lmc_media = &lmc_t1_media;
- break;
- default:
- printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
- unregister_hdlc_device(dev);
- return -EIO;
- break;
- }
-
- lmc_initcsrs (sc, dev->base_addr, 8);
-
- lmc_gpio_mkinput (sc, 0xff);
- sc->lmc_gpio = 0; /* drive no signals yet */
-
- sc->lmc_media->defaults (sc);
-
- sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
-
- /* verify that the PCI Sub System ID matches the Adapter Model number
- * from the MII register
- */
- AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
-
- if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
- subdevice != PCI_DEVICE_ID_LMC_T1) &&
- (AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
- subdevice != PCI_DEVICE_ID_LMC_SSI) &&
- (AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
- subdevice != PCI_DEVICE_ID_LMC_DS3) &&
- (AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
- subdevice != PCI_DEVICE_ID_LMC_HSSI))
- printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
- " Subsystem ID = 0x%04x\n",
- dev->name, AdapModelNum, subdevice);
-
- /*
- * reset clock
- */
- LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
-
- sc->board_idx = cards_found++;
- sc->extra_stats.check = STATCHECK;
- sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
- sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
- sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
-
- sc->lmc_ok = 0;
- sc->last_link_status = 0;
-
- return 0;
-}
-
-/*
- * Called from pci when removing module.
- */
-static void lmc_remove_one(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
-
- if (dev) {
- printk(KERN_DEBUG "%s: removing...\n", dev->name);
- unregister_hdlc_device(dev);
- free_netdev(dev);
- }
-}
-
-/* After this is called, packets can be sent.
- * Does not initialize the addresses
- */
-static int lmc_open(struct net_device *dev)
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- int err;
-
- lmc_led_on(sc, LMC_DS3_LED0);
-
- lmc_dec_reset(sc);
- lmc_reset(sc);
-
- LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
- LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
- lmc_mii_readreg(sc, 0, 17));
-
- if (sc->lmc_ok)
- return 0;
-
- lmc_softreset (sc);
-
- /* Since we have to use PCI bus, this should work on x86,alpha,ppc */
- if (request_irq (dev->irq, lmc_interrupt, IRQF_SHARED, dev->name, dev)){
- printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
- return -EAGAIN;
- }
- sc->got_irq = 1;
-
- /* Assert Terminal Active */
- sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
- sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
-
- /*
- * reset to last state.
- */
- sc->lmc_media->set_status (sc, NULL);
-
- /* setup default bits to be used in tulip_desc_t transmit descriptor
- * -baz */
- sc->TxDescriptControlInit = (
- LMC_TDES_INTERRUPT_ON_COMPLETION
- | LMC_TDES_FIRST_SEGMENT
- | LMC_TDES_LAST_SEGMENT
- | LMC_TDES_SECOND_ADDR_CHAINED
- | LMC_TDES_DISABLE_PADDING
- );
-
- if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) {
- /* disable 32 bit CRC generated by ASIC */
- sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
- }
- sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length);
- /* Acknoledge the Terminal Active and light LEDs */
-
- /* dev->flags |= IFF_UP; */
-
- if ((err = lmc_proto_open(sc)) != 0)
- return err;
-
- netif_start_queue(dev);
- sc->extra_stats.tx_tbusy0++;
-
- /*
- * select what interrupts we want to get
- */
- sc->lmc_intrmask = 0;
- /* Should be using the default interrupt mask defined in the .h file. */
- sc->lmc_intrmask |= (TULIP_STS_NORMALINTR
- | TULIP_STS_RXINTR
- | TULIP_STS_TXINTR
- | TULIP_STS_ABNRMLINTR
- | TULIP_STS_SYSERROR
- | TULIP_STS_TXSTOPPED
- | TULIP_STS_TXUNDERFLOW
- | TULIP_STS_RXSTOPPED
- | TULIP_STS_RXNOBUF
- );
- LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
-
- sc->lmc_cmdmode |= TULIP_CMD_TXRUN;
- sc->lmc_cmdmode |= TULIP_CMD_RXRUN;
- LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
-
- sc->lmc_ok = 1; /* Run watchdog */
-
- /*
- * Set the if up now - pfb
- */
-
- sc->last_link_status = 1;
-
- /*
- * Setup a timer for the watchdog on probe, and start it running.
- * Since lmc_ok == 0, it will be a NOP for now.
- */
- timer_setup(&sc->timer, lmc_watchdog, 0);
- sc->timer.expires = jiffies + HZ;
- add_timer (&sc->timer);
-
- return 0;
-}
-
-/* Total reset to compensate for the AdTran DSU doing bad things
- * under heavy load
- */
-
-static void lmc_running_reset (struct net_device *dev) /*fold00*/
-{
- lmc_softc_t *sc = dev_to_sc(dev);
-
- /* stop interrupts */
- /* Clear the interrupt mask */
- LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
-
- lmc_dec_reset (sc);
- lmc_reset (sc);
- lmc_softreset (sc);
- /* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */
- sc->lmc_media->set_link_status (sc, 1);
- sc->lmc_media->set_status (sc, NULL);
-
- netif_wake_queue(dev);
-
- sc->lmc_txfull = 0;
- sc->extra_stats.tx_tbusy0++;
-
- sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
- LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
-
- sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN);
- LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
-}
-
-
-/* This is what is called when you ifconfig down a device.
- * This disables the timer for the watchdog and keepalives,
- * and disables the irq for dev.
- */
-static int lmc_close(struct net_device *dev)
-{
- /* not calling release_region() as we should */
- lmc_softc_t *sc = dev_to_sc(dev);
-
- sc->lmc_ok = 0;
- sc->lmc_media->set_link_status (sc, 0);
- del_timer (&sc->timer);
- lmc_proto_close(sc);
- lmc_ifdown (dev);
-
- return 0;
-}
-
-/* Ends the transfer of packets */
-/* When the interface goes down, this is called */
-static int lmc_ifdown (struct net_device *dev) /*fold00*/
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- u32 csr6;
- int i;
-
- /* Don't let anything else go on right now */
- // dev->start = 0;
- netif_stop_queue(dev);
- sc->extra_stats.tx_tbusy1++;
-
- /* stop interrupts */
- /* Clear the interrupt mask */
- LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
-
- /* Stop Tx and Rx on the chip */
- csr6 = LMC_CSR_READ (sc, csr_command);
- csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */
- csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */
- LMC_CSR_WRITE (sc, csr_command, csr6);
-
- sc->lmc_device->stats.rx_missed_errors +=
- LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
-
- /* release the interrupt */
- if(sc->got_irq == 1){
- free_irq (dev->irq, dev);
- sc->got_irq = 0;
- }
-
- /* free skbuffs in the Rx queue */
- for (i = 0; i < LMC_RXDESCS; i++)
- {
- struct sk_buff *skb = sc->lmc_rxq[i];
- sc->lmc_rxq[i] = NULL;
- sc->lmc_rxring[i].status = 0;
- sc->lmc_rxring[i].length = 0;
- sc->lmc_rxring[i].buffer1 = 0xDEADBEEF;
- if (skb != NULL)
- dev_kfree_skb(skb);
- sc->lmc_rxq[i] = NULL;
- }
-
- for (i = 0; i < LMC_TXDESCS; i++)
- {
- if (sc->lmc_txq[i] != NULL)
- dev_kfree_skb(sc->lmc_txq[i]);
- sc->lmc_txq[i] = NULL;
- }
-
- lmc_led_off (sc, LMC_MII16_LED_ALL);
-
- netif_wake_queue(dev);
- sc->extra_stats.tx_tbusy0++;
-
- return 0;
-}
-
-/* Interrupt handling routine. This will take an incoming packet, or clean
- * up after a trasmit.
- */
-static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
-{
- struct net_device *dev = (struct net_device *) dev_instance;
- lmc_softc_t *sc = dev_to_sc(dev);
- u32 csr;
- int i;
- s32 stat;
- unsigned int badtx;
- int max_work = LMC_RXDESCS;
- int handled = 0;
-
- spin_lock(&sc->lmc_lock);
-
- /*
- * Read the csr to find what interrupts we have (if any)
- */
- csr = LMC_CSR_READ (sc, csr_status);
-
- /*
- * Make sure this is our interrupt
- */
- if ( ! (csr & sc->lmc_intrmask)) {
- goto lmc_int_fail_out;
- }
-
- /* always go through this loop at least once */
- while (csr & sc->lmc_intrmask) {
- handled = 1;
-
- /*
- * Clear interrupt bits, we handle all case below
- */
- LMC_CSR_WRITE (sc, csr_status, csr);
-
- /*
- * One of
- * - Transmit process timed out CSR5<1>
- * - Transmit jabber timeout CSR5<3>
- * - Transmit underflow CSR5<5>
- * - Transmit Receiver buffer unavailable CSR5<7>
- * - Receive process stopped CSR5<8>
- * - Receive watchdog timeout CSR5<9>
- * - Early transmit interrupt CSR5<10>
- *
- * Is this really right? Should we do a running reset for jabber?
- * (being a WAN card and all)
- */
- if (csr & TULIP_STS_ABNRMLINTR){
- lmc_running_reset (dev);
- break;
- }
-
- if (csr & TULIP_STS_RXINTR)
- lmc_rx (dev);
-
- if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) {
-
- int n_compl = 0 ;
- /* reset the transmit timeout detection flag -baz */
- sc->extra_stats.tx_NoCompleteCnt = 0;
-
- badtx = sc->lmc_taint_tx;
- i = badtx % LMC_TXDESCS;
-
- while ((badtx < sc->lmc_next_tx)) {
- stat = sc->lmc_txring[i].status;
-
- LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat,
- sc->lmc_txring[i].length);
- /*
- * If bit 31 is 1 the tulip owns it break out of the loop
- */
- if (stat & 0x80000000)
- break;
-
- n_compl++ ; /* i.e., have an empty slot in ring */
- /*
- * If we have no skbuff or have cleared it
- * Already continue to the next buffer
- */
- if (sc->lmc_txq[i] == NULL)
- continue;
-
- /*
- * Check the total error summary to look for any errors
- */
- if (stat & 0x8000) {
- sc->lmc_device->stats.tx_errors++;
- if (stat & 0x4104)
- sc->lmc_device->stats.tx_aborted_errors++;
- if (stat & 0x0C00)
- sc->lmc_device->stats.tx_carrier_errors++;
- if (stat & 0x0200)
- sc->lmc_device->stats.tx_window_errors++;
- if (stat & 0x0002)
- sc->lmc_device->stats.tx_fifo_errors++;
- } else {
- sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
-
- sc->lmc_device->stats.tx_packets++;
- }
-
- dev_consume_skb_irq(sc->lmc_txq[i]);
- sc->lmc_txq[i] = NULL;
-
- badtx++;
- i = badtx % LMC_TXDESCS;
- }
-
- if (sc->lmc_next_tx - badtx > LMC_TXDESCS)
- {
- printk ("%s: out of sync pointer\n", dev->name);
- badtx += LMC_TXDESCS;
- }
- LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
- sc->lmc_txfull = 0;
- netif_wake_queue(dev);
- sc->extra_stats.tx_tbusy0++;
-
-
-#ifdef DEBUG
- sc->extra_stats.dirtyTx = badtx;
- sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
- sc->extra_stats.lmc_txfull = sc->lmc_txfull;
-#endif
- sc->lmc_taint_tx = badtx;
-
- /*
- * Why was there a break here???
- */
- } /* end handle transmit interrupt */
-
- if (csr & TULIP_STS_SYSERROR) {
- u32 error;
- printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr);
- error = csr>>23 & 0x7;
- switch(error){
- case 0x000:
- printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name);
- break;
- case 0x001:
- printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name);
- break;
- case 0x002:
- printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name);
- break;
- default:
- printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name);
- }
- lmc_dec_reset (sc);
- lmc_reset (sc);
- LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
- LMC_EVENT_LOG(LMC_EVENT_RESET2,
- lmc_mii_readreg (sc, 0, 16),
- lmc_mii_readreg (sc, 0, 17));
-
- }
-
-
- if(max_work-- <= 0)
- break;
-
- /*
- * Get current csr status to make sure
- * we've cleared all interrupts
- */
- csr = LMC_CSR_READ (sc, csr_status);
- } /* end interrupt loop */
- LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr);
-
-lmc_int_fail_out:
-
- spin_unlock(&sc->lmc_lock);
-
- return IRQ_RETVAL(handled);
-}
-
-static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- u32 flag;
- int entry;
- unsigned long flags;
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
-
- /* normal path, tbusy known to be zero */
-
- entry = sc->lmc_next_tx % LMC_TXDESCS;
-
- sc->lmc_txq[entry] = skb;
- sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data);
-
- LMC_CONSOLE_LOG("xmit", skb->data, skb->len);
-
-#ifndef GCOM
- /* If the queue is less than half full, don't interrupt */
- if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2)
- {
- /* Do not interrupt on completion of this packet */
- flag = 0x60000000;
- netif_wake_queue(dev);
- }
- else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2)
- {
- /* This generates an interrupt on completion of this packet */
- flag = 0xe0000000;
- netif_wake_queue(dev);
- }
- else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1)
- {
- /* Do not interrupt on completion of this packet */
- flag = 0x60000000;
- netif_wake_queue(dev);
- }
- else
- {
- /* This generates an interrupt on completion of this packet */
- flag = 0xe0000000;
- sc->lmc_txfull = 1;
- netif_stop_queue(dev);
- }
-#else
- flag = LMC_TDES_INTERRUPT_ON_COMPLETION;
-
- if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
- { /* ring full, go busy */
- sc->lmc_txfull = 1;
- netif_stop_queue(dev);
- sc->extra_stats.tx_tbusy1++;
- LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
- }
-#endif
-
-
- if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */
- flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */
-
- /* don't pad small packets either */
- flag = sc->lmc_txring[entry].length = (skb->len) | flag |
- sc->TxDescriptControlInit;
-
- /* set the transmit timeout flag to be checked in
- * the watchdog timer handler. -baz
- */
-
- sc->extra_stats.tx_NoCompleteCnt++;
- sc->lmc_next_tx++;
-
- /* give ownership to the chip */
- LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry);
- sc->lmc_txring[entry].status = 0x80000000;
-
- /* send now! */
- LMC_CSR_WRITE (sc, csr_txpoll, 0);
-
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- return NETDEV_TX_OK;
-}
-
-
-static int lmc_rx(struct net_device *dev)
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- int i;
- int rx_work_limit = LMC_RXDESCS;
- int rxIntLoopCnt; /* debug -baz */
- int localLengthErrCnt = 0;
- long stat;
- struct sk_buff *skb, *nsb;
- u16 len;
-
- lmc_led_on(sc, LMC_DS3_LED3);
-
- rxIntLoopCnt = 0; /* debug -baz */
-
- i = sc->lmc_next_rx % LMC_RXDESCS;
-
- while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4)
- {
- rxIntLoopCnt++; /* debug -baz */
- len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
- if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */
- if ((stat & 0x0000ffff) != 0x7fff) {
- /* Oversized frame */
- sc->lmc_device->stats.rx_length_errors++;
- goto skip_packet;
- }
- }
-
- if (stat & 0x00000008) { /* Catch a dribbling bit error */
- sc->lmc_device->stats.rx_errors++;
- sc->lmc_device->stats.rx_frame_errors++;
- goto skip_packet;
- }
-
-
- if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
- sc->lmc_device->stats.rx_errors++;
- sc->lmc_device->stats.rx_crc_errors++;
- goto skip_packet;
- }
-
- if (len > LMC_PKT_BUF_SZ) {
- sc->lmc_device->stats.rx_length_errors++;
- localLengthErrCnt++;
- goto skip_packet;
- }
-
- if (len < sc->lmc_crcSize + 2) {
- sc->lmc_device->stats.rx_length_errors++;
- sc->extra_stats.rx_SmallPktCnt++;
- localLengthErrCnt++;
- goto skip_packet;
- }
-
- if(stat & 0x00004000){
- printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
- }
-
- len -= sc->lmc_crcSize;
-
- skb = sc->lmc_rxq[i];
-
- /*
- * We ran out of memory at some point
- * just allocate an skb buff and continue.
- */
-
- if (!skb) {
- nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
- if (nsb) {
- sc->lmc_rxq[i] = nsb;
- nsb->dev = dev;
- sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
- }
- sc->failed_recv_alloc = 1;
- goto skip_packet;
- }
-
- sc->lmc_device->stats.rx_packets++;
- sc->lmc_device->stats.rx_bytes += len;
-
- LMC_CONSOLE_LOG("recv", skb->data, len);
-
- /*
- * I'm not sure of the sanity of this
- * Packets could be arriving at a constant
- * 44.210mbits/sec and we're going to copy
- * them into a new buffer??
- */
-
- if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */
- /*
- * If it's a large packet don't copy it just hand it up
- */
- give_it_anyways:
-
- sc->lmc_rxq[i] = NULL;
- sc->lmc_rxring[i].buffer1 = 0x0;
-
- skb_put (skb, len);
- skb->protocol = lmc_proto_type(sc, skb);
- skb_reset_mac_header(skb);
- /* skb_reset_network_header(skb); */
- skb->dev = dev;
- lmc_proto_netif(sc, skb);
-
- /*
- * This skb will be destroyed by the upper layers, make a new one
- */
- nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
- if (nsb) {
- sc->lmc_rxq[i] = nsb;
- nsb->dev = dev;
- sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
- /* Transferred to 21140 below */
- }
- else {
- /*
- * We've run out of memory, stop trying to allocate
- * memory and exit the interrupt handler
- *
- * The chip may run out of receivers and stop
- * in which care we'll try to allocate the buffer
- * again. (once a second)
- */
- sc->extra_stats.rx_BuffAllocErr++;
- LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
- sc->failed_recv_alloc = 1;
- goto skip_out_of_mem;
- }
- }
- else {
- nsb = dev_alloc_skb(len);
- if(!nsb) {
- goto give_it_anyways;
- }
- skb_copy_from_linear_data(skb, skb_put(nsb, len), len);
-
- nsb->protocol = lmc_proto_type(sc, nsb);
- skb_reset_mac_header(nsb);
- /* skb_reset_network_header(nsb); */
- nsb->dev = dev;
- lmc_proto_netif(sc, nsb);
- }
-
- skip_packet:
- LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
- sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4;
-
- sc->lmc_next_rx++;
- i = sc->lmc_next_rx % LMC_RXDESCS;
- rx_work_limit--;
- if (rx_work_limit < 0)
- break;
- }
-
- /* detect condition for LMC1000 where DSU cable attaches and fills
- * descriptors with bogus packets
- *
- if (localLengthErrCnt > LMC_RXDESCS - 3) {
- sc->extra_stats.rx_BadPktSurgeCnt++;
- LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
- sc->extra_stats.rx_BadPktSurgeCnt);
- } */
-
- /* save max count of receive descriptors serviced */
- if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
- sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
-
-#ifdef DEBUG
- if (rxIntLoopCnt == 0)
- {
- for (i = 0; i < LMC_RXDESCS; i++)
- {
- if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT)
- != DESC_OWNED_BY_DC21X4)
- {
- rxIntLoopCnt++;
- }
- }
- LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0);
- }
-#endif
-
-
- lmc_led_off(sc, LMC_DS3_LED3);
-
-skip_out_of_mem:
- return 0;
-}
-
-static struct net_device_stats *lmc_get_stats(struct net_device *dev)
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
-
- sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
-
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-
- return &sc->lmc_device->stats;
-}
-
-static struct pci_driver lmc_driver = {
- .name = "lmc",
- .id_table = lmc_pci_tbl,
- .probe = lmc_init_one,
- .remove = lmc_remove_one,
-};
-
-module_pci_driver(lmc_driver);
-
-unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/
-{
- int i;
- int command = (0xf6 << 10) | (devaddr << 5) | regno;
- int retval = 0;
-
- LMC_MII_SYNC (sc);
-
- for (i = 15; i >= 0; i--)
- {
- int dataval = (command & (1 << i)) ? 0x20000 : 0;
-
- LMC_CSR_WRITE (sc, csr_9, dataval);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- }
-
- for (i = 19; i > 0; i--)
- {
- LMC_CSR_WRITE (sc, csr_9, 0x40000);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0);
- LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- }
-
- return (retval >> 1) & 0xffff;
-}
-
-void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/
-{
- int i = 32;
- int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data;
-
- LMC_MII_SYNC (sc);
-
- i = 31;
- while (i >= 0)
- {
- int datav;
-
- if (command & (1 << i))
- datav = 0x20000;
- else
- datav = 0x00000;
-
- LMC_CSR_WRITE (sc, csr_9, datav);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000));
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- i--;
- }
-
- i = 2;
- while (i > 0)
- {
- LMC_CSR_WRITE (sc, csr_9, 0x40000);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- LMC_CSR_WRITE (sc, csr_9, 0x50000);
- lmc_delay ();
- /* __SLOW_DOWN_IO; */
- i--;
- }
-}
-
-static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
-{
- int i;
-
- /* Initialize the receive rings and buffers. */
- sc->lmc_txfull = 0;
- sc->lmc_next_rx = 0;
- sc->lmc_next_tx = 0;
- sc->lmc_taint_rx = 0;
- sc->lmc_taint_tx = 0;
-
- /*
- * Setup each one of the receiver buffers
- * allocate an skbuff for each one, setup the descriptor table
- * and point each buffer at the next one
- */
-
- for (i = 0; i < LMC_RXDESCS; i++)
- {
- struct sk_buff *skb;
-
- if (sc->lmc_rxq[i] == NULL)
- {
- skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
- if(skb == NULL){
- printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name);
- sc->failed_ring = 1;
- break;
- }
- else{
- sc->lmc_rxq[i] = skb;
- }
- }
- else
- {
- skb = sc->lmc_rxq[i];
- }
-
- skb->dev = sc->lmc_device;
-
- /* owned by 21140 */
- sc->lmc_rxring[i].status = 0x80000000;
-
- /* used to be PKT_BUF_SZ now uses skb since we lose some to head room */
- sc->lmc_rxring[i].length = skb_tailroom(skb);
-
- /* use to be tail which is dumb since you're thinking why write
- * to the end of the packj,et but since there's nothing there tail == data
- */
- sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data);
-
- /* This is fair since the structure is static and we have the next address */
- sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]);
-
- }
-
- /*
- * Sets end of ring
- */
- if (i != 0) {
- sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
- sc->lmc_rxring[i - 1].buffer2 = virt_to_bus(&sc->lmc_rxring[0]); /* Point back to the start */
- }
- LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */
-
- /* Initialize the transmit rings and buffers */
- for (i = 0; i < LMC_TXDESCS; i++)
- {
- if (sc->lmc_txq[i] != NULL){ /* have buffer */
- dev_kfree_skb(sc->lmc_txq[i]); /* free it */
- sc->lmc_device->stats.tx_dropped++; /* We just dropped a packet */
- }
- sc->lmc_txq[i] = NULL;
- sc->lmc_txring[i].status = 0x00000000;
- sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]);
- }
- sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]);
- LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring));
-}
-
-void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
-{
- sc->lmc_gpio_io &= ~bits;
- LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
-}
-
-void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
-{
- sc->lmc_gpio_io |= bits;
- LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
-}
-
-void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
-{
- if ((~sc->lmc_miireg16) & led) /* Already on! */
- return;
-
- sc->lmc_miireg16 &= ~led;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
-}
-
-void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
-{
- if (sc->lmc_miireg16 & led) /* Already set don't do anything */
- return;
-
- sc->lmc_miireg16 |= led;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
-}
-
-static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
-{
- sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
-
- sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
- lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
-
- /*
- * make some of the GPIO pins be outputs
- */
- lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
-
- /*
- * RESET low to force state reset. This also forces
- * the transmitter clock to be internal, but we expect to reset
- * that later anyway.
- */
- sc->lmc_gpio &= ~(LMC_GEP_RESET);
- LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
-
- /*
- * hold for more than 10 microseconds
- */
- udelay(50);
-
- /*
- * stop driving Xilinx-related signals
- */
- lmc_gpio_mkinput(sc, LMC_GEP_RESET);
-
- /*
- * Call media specific init routine
- */
- sc->lmc_media->init(sc);
-
- sc->extra_stats.resetCount++;
-}
-
-static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
-{
- u32 val;
-
- /*
- * disable all interrupts
- */
- sc->lmc_intrmask = 0;
- LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask);
-
- /*
- * Reset the chip with a software reset command.
- * Wait 10 microseconds (actually 50 PCI cycles but at
- * 33MHz that comes to two microseconds but wait a
- * bit longer anyways)
- */
- LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
- udelay(25);
-#ifdef __sparc__
- sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode);
- sc->lmc_busmode = 0x00100000;
- sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET;
- LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode);
-#endif
- sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command);
-
- /*
- * We want:
- * no ethernet address in frames we write
- * disable padding (txdesc, padding disable)
- * ignore runt frames (rdes0 bit 15)
- * no receiver watchdog or transmitter jabber timer
- * (csr15 bit 0,14 == 1)
- * if using 16-bit CRC, turn off CRC (trans desc, crc disable)
- */
-
- sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS
- | TULIP_CMD_FULLDUPLEX
- | TULIP_CMD_PASSBADPKT
- | TULIP_CMD_NOHEARTBEAT
- | TULIP_CMD_PORTSELECT
- | TULIP_CMD_RECEIVEALL
- | TULIP_CMD_MUSTBEONE
- );
- sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE
- | TULIP_CMD_THRESHOLDCTL
- | TULIP_CMD_STOREFWD
- | TULIP_CMD_TXTHRSHLDCTL
- );
-
- LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
-
- /*
- * disable receiver watchdog and transmit jabber
- */
- val = LMC_CSR_READ(sc, csr_sia_general);
- val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE);
- LMC_CSR_WRITE(sc, csr_sia_general, val);
-}
-
-static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/
- size_t csr_size)
-{
- sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size;
- sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size;
- sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size;
- sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size;
- sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size;
- sc->lmc_csrs.csr_status = csr_base + 5 * csr_size;
- sc->lmc_csrs.csr_command = csr_base + 6 * csr_size;
- sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size;
- sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size;
- sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size;
- sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size;
- sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size;
- sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size;
- sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size;
- sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size;
- sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size;
-}
-
-static void lmc_driver_timeout(struct net_device *dev, unsigned int txqueue)
-{
- lmc_softc_t *sc = dev_to_sc(dev);
- u32 csr6;
- unsigned long flags;
-
- spin_lock_irqsave(&sc->lmc_lock, flags);
-
- printk("%s: Xmitter busy|\n", dev->name);
-
- sc->extra_stats.tx_tbusy_calls++;
- if (jiffies - dev_trans_start(dev) < TX_TIMEOUT)
- goto bug_out;
-
- /*
- * Chip seems to have locked up
- * Reset it
- * This whips out all our descriptor
- * table and starts from scartch
- */
-
- LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
- LMC_CSR_READ (sc, csr_status),
- sc->extra_stats.tx_ProcTimeout);
-
- lmc_running_reset (dev);
-
- LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
- LMC_EVENT_LOG(LMC_EVENT_RESET2,
- lmc_mii_readreg (sc, 0, 16),
- lmc_mii_readreg (sc, 0, 17));
-
- /* restart the tx processes */
- csr6 = LMC_CSR_READ (sc, csr_command);
- LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002);
- LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002);
-
- /* immediate transmit */
- LMC_CSR_WRITE (sc, csr_txpoll, 0);
-
- sc->lmc_device->stats.tx_errors++;
- sc->extra_stats.tx_ProcTimeout++; /* -baz */
-
- netif_trans_update(dev); /* prevent tx timeout */
-
-bug_out:
-
- spin_unlock_irqrestore(&sc->lmc_lock, flags);
-}
diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c
deleted file mode 100644
index ec1ac7b1f3fd..000000000000
--- a/drivers/net/wan/lmc/lmc_media.c
+++ /dev/null
@@ -1,1206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* $Id: lmc_media.c,v 1.13 2000/04/11 05:25:26 asj Exp $ */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/inet.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#include <linux/uaccess.h>
-
-#include "lmc.h"
-#include "lmc_var.h"
-#include "lmc_ioctl.h"
-#include "lmc_debug.h"
-
-#define CONFIG_LMC_IGNORE_HARDWARE_HANDSHAKE 1
-
- /*
- * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
- * All rights reserved. www.lanmedia.com
- *
- * This code is written by:
- * Andrew Stanley-Jones (asj@cban.com)
- * Rob Braun (bbraun@vix.com),
- * Michael Graff (explorer@vix.com) and
- * Matt Thomas (matt@3am-software.com).
- */
-
-/*
- * protocol independent method.
- */
-static void lmc_set_protocol (lmc_softc_t * const, lmc_ctl_t *);
-
-/*
- * media independent methods to check on media status, link, light LEDs,
- * etc.
- */
-static void lmc_ds3_init (lmc_softc_t * const);
-static void lmc_ds3_default (lmc_softc_t * const);
-static void lmc_ds3_set_status (lmc_softc_t * const, lmc_ctl_t *);
-static void lmc_ds3_set_100ft (lmc_softc_t * const, int);
-static int lmc_ds3_get_link_status (lmc_softc_t * const);
-static void lmc_ds3_set_crc_length (lmc_softc_t * const, int);
-static void lmc_ds3_set_scram (lmc_softc_t * const, int);
-static void lmc_ds3_watchdog (lmc_softc_t * const);
-
-static void lmc_hssi_init (lmc_softc_t * const);
-static void lmc_hssi_default (lmc_softc_t * const);
-static void lmc_hssi_set_status (lmc_softc_t * const, lmc_ctl_t *);
-static void lmc_hssi_set_clock (lmc_softc_t * const, int);
-static int lmc_hssi_get_link_status (lmc_softc_t * const);
-static void lmc_hssi_set_link_status (lmc_softc_t * const, int);
-static void lmc_hssi_set_crc_length (lmc_softc_t * const, int);
-static void lmc_hssi_watchdog (lmc_softc_t * const);
-
-static void lmc_ssi_init (lmc_softc_t * const);
-static void lmc_ssi_default (lmc_softc_t * const);
-static void lmc_ssi_set_status (lmc_softc_t * const, lmc_ctl_t *);
-static void lmc_ssi_set_clock (lmc_softc_t * const, int);
-static void lmc_ssi_set_speed (lmc_softc_t * const, lmc_ctl_t *);
-static int lmc_ssi_get_link_status (lmc_softc_t * const);
-static void lmc_ssi_set_link_status (lmc_softc_t * const, int);
-static void lmc_ssi_set_crc_length (lmc_softc_t * const, int);
-static void lmc_ssi_watchdog (lmc_softc_t * const);
-
-static void lmc_t1_init (lmc_softc_t * const);
-static void lmc_t1_default (lmc_softc_t * const);
-static void lmc_t1_set_status (lmc_softc_t * const, lmc_ctl_t *);
-static int lmc_t1_get_link_status (lmc_softc_t * const);
-static void lmc_t1_set_circuit_type (lmc_softc_t * const, int);
-static void lmc_t1_set_crc_length (lmc_softc_t * const, int);
-static void lmc_t1_set_clock (lmc_softc_t * const, int);
-static void lmc_t1_watchdog (lmc_softc_t * const);
-
-static void lmc_dummy_set_1 (lmc_softc_t * const, int);
-static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *);
-
-static inline void write_av9110_bit (lmc_softc_t *, int);
-static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32);
-
-lmc_media_t lmc_ds3_media = {
- .init = lmc_ds3_init, /* special media init stuff */
- .defaults = lmc_ds3_default, /* reset to default state */
- .set_status = lmc_ds3_set_status, /* reset status to state provided */
- .set_clock_source = lmc_dummy_set_1, /* set clock source */
- .set_speed = lmc_dummy_set2_1, /* set line speed */
- .set_cable_length = lmc_ds3_set_100ft, /* set cable length */
- .set_scrambler = lmc_ds3_set_scram, /* set scrambler */
- .get_link_status = lmc_ds3_get_link_status, /* get link status */
- .set_link_status = lmc_dummy_set_1, /* set link status */
- .set_crc_length = lmc_ds3_set_crc_length, /* set CRC length */
- .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
- .watchdog = lmc_ds3_watchdog
-};
-
-lmc_media_t lmc_hssi_media = {
- .init = lmc_hssi_init, /* special media init stuff */
- .defaults = lmc_hssi_default, /* reset to default state */
- .set_status = lmc_hssi_set_status, /* reset status to state provided */
- .set_clock_source = lmc_hssi_set_clock, /* set clock source */
- .set_speed = lmc_dummy_set2_1, /* set line speed */
- .set_cable_length = lmc_dummy_set_1, /* set cable length */
- .set_scrambler = lmc_dummy_set_1, /* set scrambler */
- .get_link_status = lmc_hssi_get_link_status, /* get link status */
- .set_link_status = lmc_hssi_set_link_status, /* set link status */
- .set_crc_length = lmc_hssi_set_crc_length, /* set CRC length */
- .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
- .watchdog = lmc_hssi_watchdog
-};
-
-lmc_media_t lmc_ssi_media = {
- .init = lmc_ssi_init, /* special media init stuff */
- .defaults = lmc_ssi_default, /* reset to default state */
- .set_status = lmc_ssi_set_status, /* reset status to state provided */
- .set_clock_source = lmc_ssi_set_clock, /* set clock source */
- .set_speed = lmc_ssi_set_speed, /* set line speed */
- .set_cable_length = lmc_dummy_set_1, /* set cable length */
- .set_scrambler = lmc_dummy_set_1, /* set scrambler */
- .get_link_status = lmc_ssi_get_link_status, /* get link status */
- .set_link_status = lmc_ssi_set_link_status, /* set link status */
- .set_crc_length = lmc_ssi_set_crc_length, /* set CRC length */
- .set_circuit_type = lmc_dummy_set_1, /* set T1 or E1 circuit type */
- .watchdog = lmc_ssi_watchdog
-};
-
-lmc_media_t lmc_t1_media = {
- .init = lmc_t1_init, /* special media init stuff */
- .defaults = lmc_t1_default, /* reset to default state */
- .set_status = lmc_t1_set_status, /* reset status to state provided */
- .set_clock_source = lmc_t1_set_clock, /* set clock source */
- .set_speed = lmc_dummy_set2_1, /* set line speed */
- .set_cable_length = lmc_dummy_set_1, /* set cable length */
- .set_scrambler = lmc_dummy_set_1, /* set scrambler */
- .get_link_status = lmc_t1_get_link_status, /* get link status */
- .set_link_status = lmc_dummy_set_1, /* set link status */
- .set_crc_length = lmc_t1_set_crc_length, /* set CRC length */
- .set_circuit_type = lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */
- .watchdog = lmc_t1_watchdog
-};
-
-static void
-lmc_dummy_set_1 (lmc_softc_t * const sc, int a)
-{
-}
-
-static void
-lmc_dummy_set2_1 (lmc_softc_t * const sc, lmc_ctl_t * a)
-{
-}
-
-/*
- * HSSI methods
- */
-
-static void
-lmc_hssi_init (lmc_softc_t * const sc)
-{
- sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5200;
-
- lmc_gpio_mkoutput (sc, LMC_GEP_HSSI_CLOCK);
-}
-
-static void
-lmc_hssi_default (lmc_softc_t * const sc)
-{
- sc->lmc_miireg16 = LMC_MII16_LED_ALL;
-
- sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN);
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT);
- sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16);
-}
-
-/*
- * Given a user provided state, set ourselves up to match it. This will
- * always reset the card if needed.
- */
-static void
-lmc_hssi_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- if (ctl == NULL)
- {
- sc->lmc_media->set_clock_source (sc, sc->ictl.clock_source);
- lmc_set_protocol (sc, NULL);
-
- return;
- }
-
- /*
- * check for change in clock source
- */
- if (ctl->clock_source && !sc->ictl.clock_source)
- {
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_INT);
- sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT;
- }
- else if (!ctl->clock_source && sc->ictl.clock_source)
- {
- sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT);
- }
-
- lmc_set_protocol (sc, ctl);
-}
-
-/*
- * 1 == internal, 0 == external
- */
-static void
-lmc_hssi_set_clock (lmc_softc_t * const sc, int ie)
-{
- int old;
- old = sc->ictl.clock_source;
- if (ie == LMC_CTL_CLOCK_SOURCE_EXT)
- {
- sc->lmc_gpio |= LMC_GEP_HSSI_CLOCK;
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
- if(old != ie)
- printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS);
- }
- else
- {
- sc->lmc_gpio &= ~(LMC_GEP_HSSI_CLOCK);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
- if(old != ie)
- printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS);
- }
-}
-
-/*
- * return hardware link status.
- * 0 == link is down, 1 == link is up.
- */
-static int
-lmc_hssi_get_link_status (lmc_softc_t * const sc)
-{
- /*
- * We're using the same code as SSI since
- * they're practically the same
- */
- return lmc_ssi_get_link_status(sc);
-}
-
-static void
-lmc_hssi_set_link_status (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_LINK_UP)
- sc->lmc_miireg16 |= LMC_MII16_HSSI_TA;
- else
- sc->lmc_miireg16 &= ~LMC_MII16_HSSI_TA;
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-/*
- * 0 == 16bit, 1 == 32bit
- */
-static void
-lmc_hssi_set_crc_length (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_CTL_CRC_LENGTH_32)
- {
- /* 32 bit */
- sc->lmc_miireg16 |= LMC_MII16_HSSI_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
- }
- else
- {
- /* 16 bit */
- sc->lmc_miireg16 &= ~LMC_MII16_HSSI_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-static void
-lmc_hssi_watchdog (lmc_softc_t * const sc)
-{
- /* HSSI is blank */
-}
-
-/*
- * DS3 methods
- */
-
-/*
- * Set cable length
- */
-static void
-lmc_ds3_set_100ft (lmc_softc_t * const sc, int ie)
-{
- if (ie == LMC_CTL_CABLE_LENGTH_GT_100FT)
- {
- sc->lmc_miireg16 &= ~LMC_MII16_DS3_ZERO;
- sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_GT_100FT;
- }
- else if (ie == LMC_CTL_CABLE_LENGTH_LT_100FT)
- {
- sc->lmc_miireg16 |= LMC_MII16_DS3_ZERO;
- sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_LT_100FT;
- }
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-static void
-lmc_ds3_default (lmc_softc_t * const sc)
-{
- sc->lmc_miireg16 = LMC_MII16_LED_ALL;
-
- sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN);
- sc->lmc_media->set_cable_length (sc, LMC_CTL_CABLE_LENGTH_LT_100FT);
- sc->lmc_media->set_scrambler (sc, LMC_CTL_OFF);
- sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16);
-}
-
-/*
- * Given a user provided state, set ourselves up to match it. This will
- * always reset the card if needed.
- */
-static void
-lmc_ds3_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- if (ctl == NULL)
- {
- sc->lmc_media->set_cable_length (sc, sc->ictl.cable_length);
- sc->lmc_media->set_scrambler (sc, sc->ictl.scrambler_onoff);
- lmc_set_protocol (sc, NULL);
-
- return;
- }
-
- /*
- * check for change in cable length setting
- */
- if (ctl->cable_length && !sc->ictl.cable_length)
- lmc_ds3_set_100ft (sc, LMC_CTL_CABLE_LENGTH_GT_100FT);
- else if (!ctl->cable_length && sc->ictl.cable_length)
- lmc_ds3_set_100ft (sc, LMC_CTL_CABLE_LENGTH_LT_100FT);
-
- /*
- * Check for change in scrambler setting (requires reset)
- */
- if (ctl->scrambler_onoff && !sc->ictl.scrambler_onoff)
- lmc_ds3_set_scram (sc, LMC_CTL_ON);
- else if (!ctl->scrambler_onoff && sc->ictl.scrambler_onoff)
- lmc_ds3_set_scram (sc, LMC_CTL_OFF);
-
- lmc_set_protocol (sc, ctl);
-}
-
-static void
-lmc_ds3_init (lmc_softc_t * const sc)
-{
- int i;
-
- sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5245;
-
- /* writes zeros everywhere */
- for (i = 0; i < 21; i++)
- {
- lmc_mii_writereg (sc, 0, 17, i);
- lmc_mii_writereg (sc, 0, 18, 0);
- }
-
- /* set some essential bits */
- lmc_mii_writereg (sc, 0, 17, 1);
- lmc_mii_writereg (sc, 0, 18, 0x25); /* ser, xtx */
-
- lmc_mii_writereg (sc, 0, 17, 5);
- lmc_mii_writereg (sc, 0, 18, 0x80); /* emode */
-
- lmc_mii_writereg (sc, 0, 17, 14);
- lmc_mii_writereg (sc, 0, 18, 0x30); /* rcgen, tcgen */
-
- /* clear counters and latched bits */
- for (i = 0; i < 21; i++)
- {
- lmc_mii_writereg (sc, 0, 17, i);
- lmc_mii_readreg (sc, 0, 18);
- }
-}
-
-/*
- * 1 == DS3 payload scrambled, 0 == not scrambled
- */
-static void
-lmc_ds3_set_scram (lmc_softc_t * const sc, int ie)
-{
- if (ie == LMC_CTL_ON)
- {
- sc->lmc_miireg16 |= LMC_MII16_DS3_SCRAM;
- sc->ictl.scrambler_onoff = LMC_CTL_ON;
- }
- else
- {
- sc->lmc_miireg16 &= ~LMC_MII16_DS3_SCRAM;
- sc->ictl.scrambler_onoff = LMC_CTL_OFF;
- }
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-/*
- * return hardware link status.
- * 0 == link is down, 1 == link is up.
- */
-static int
-lmc_ds3_get_link_status (lmc_softc_t * const sc)
-{
- u16 link_status, link_status_11;
- int ret = 1;
-
- lmc_mii_writereg (sc, 0, 17, 7);
- link_status = lmc_mii_readreg (sc, 0, 18);
-
- /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions
- * led0 yellow = far-end adapter is in Red alarm condition
- * led1 blue = received an Alarm Indication signal
- * (upstream failure)
- * led2 Green = power to adapter, Gate Array loaded & driver
- * attached
- * led3 red = Loss of Signal (LOS) or out of frame (OOF)
- * conditions detected on T3 receive signal
- */
-
- lmc_led_on(sc, LMC_DS3_LED2);
-
- if ((link_status & LMC_FRAMER_REG0_DLOS) ||
- (link_status & LMC_FRAMER_REG0_OOFS)){
- ret = 0;
- if(sc->last_led_err[3] != 1){
- u16 r1;
- lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */
- r1 = lmc_mii_readreg (sc, 0, 18);
- r1 &= 0xfe;
- lmc_mii_writereg(sc, 0, 18, r1);
- printk(KERN_WARNING "%s: Red Alarm - Loss of Signal or Loss of Framing\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED3); /* turn on red LED */
- sc->last_led_err[3] = 1;
- }
- else {
- lmc_led_off(sc, LMC_DS3_LED3); /* turn on red LED */
- if(sc->last_led_err[3] == 1){
- u16 r1;
- lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */
- r1 = lmc_mii_readreg (sc, 0, 18);
- r1 |= 0x01;
- lmc_mii_writereg(sc, 0, 18, r1);
- }
- sc->last_led_err[3] = 0;
- }
-
- lmc_mii_writereg(sc, 0, 17, 0x10);
- link_status_11 = lmc_mii_readreg(sc, 0, 18);
- if((link_status & LMC_FRAMER_REG0_AIS) ||
- (link_status_11 & LMC_FRAMER_REG10_XBIT)) {
- ret = 0;
- if(sc->last_led_err[0] != 1){
- printk(KERN_WARNING "%s: AIS Alarm or XBit Error\n", sc->name);
- printk(KERN_WARNING "%s: Remote end has loss of signal or framing\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED0);
- sc->last_led_err[0] = 1;
- }
- else {
- lmc_led_off(sc, LMC_DS3_LED0);
- sc->last_led_err[0] = 0;
- }
-
- lmc_mii_writereg (sc, 0, 17, 9);
- link_status = lmc_mii_readreg (sc, 0, 18);
-
- if(link_status & LMC_FRAMER_REG9_RBLUE){
- ret = 0;
- if(sc->last_led_err[1] != 1){
- printk(KERN_WARNING "%s: Blue Alarm - Receiving all 1's\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED1);
- sc->last_led_err[1] = 1;
- }
- else {
- lmc_led_off(sc, LMC_DS3_LED1);
- sc->last_led_err[1] = 0;
- }
-
- return ret;
-}
-
-/*
- * 0 == 16bit, 1 == 32bit
- */
-static void
-lmc_ds3_set_crc_length (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_CTL_CRC_LENGTH_32)
- {
- /* 32 bit */
- sc->lmc_miireg16 |= LMC_MII16_DS3_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
- }
- else
- {
- /* 16 bit */
- sc->lmc_miireg16 &= ~LMC_MII16_DS3_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-static void
-lmc_ds3_watchdog (lmc_softc_t * const sc)
-{
-
-}
-
-
-/*
- * SSI methods
- */
-
-static void lmc_ssi_init(lmc_softc_t * const sc)
-{
- u16 mii17;
- int cable;
-
- sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000;
-
- mii17 = lmc_mii_readreg(sc, 0, 17);
-
- cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT;
- sc->ictl.cable_type = cable;
-
- lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK);
-}
-
-static void
-lmc_ssi_default (lmc_softc_t * const sc)
-{
- sc->lmc_miireg16 = LMC_MII16_LED_ALL;
-
- /*
- * make TXCLOCK always be an output
- */
- lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK);
-
- sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN);
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT);
- sc->lmc_media->set_speed (sc, NULL);
- sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16);
-}
-
-/*
- * Given a user provided state, set ourselves up to match it. This will
- * always reset the card if needed.
- */
-static void
-lmc_ssi_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- if (ctl == NULL)
- {
- sc->lmc_media->set_clock_source (sc, sc->ictl.clock_source);
- sc->lmc_media->set_speed (sc, &sc->ictl);
- lmc_set_protocol (sc, NULL);
-
- return;
- }
-
- /*
- * check for change in clock source
- */
- if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_INT
- && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_EXT)
- {
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_INT);
- sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT;
- }
- else if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_EXT
- && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_INT)
- {
- sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT);
- sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
- }
-
- if (ctl->clock_rate != sc->ictl.clock_rate)
- sc->lmc_media->set_speed (sc, ctl);
-
- lmc_set_protocol (sc, ctl);
-}
-
-/*
- * 1 == internal, 0 == external
- */
-static void
-lmc_ssi_set_clock (lmc_softc_t * const sc, int ie)
-{
- int old;
- old = ie;
- if (ie == LMC_CTL_CLOCK_SOURCE_EXT)
- {
- sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
- if(ie != old)
- printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS);
- }
- else
- {
- sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK;
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
- if(ie != old)
- printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS);
- }
-}
-
-static void
-lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- lmc_ctl_t *ictl = &sc->ictl;
- lmc_av9110_t *av;
-
- /* original settings for clock rate of:
- * 100 Khz (8,25,0,0,2) were incorrect
- * they should have been 80,125,1,3,3
- * There are 17 param combinations to produce this freq.
- * For 1.5 Mhz use 120,100,1,1,2 (226 param. combinations)
- */
- if (ctl == NULL)
- {
- av = &ictl->cardspec.ssi;
- ictl->clock_rate = 1500000;
- av->f = ictl->clock_rate;
- av->n = 120;
- av->m = 100;
- av->v = 1;
- av->x = 1;
- av->r = 2;
-
- write_av9110 (sc, av->n, av->m, av->v, av->x, av->r);
- return;
- }
-
- av = &ctl->cardspec.ssi;
-
- if (av->f == 0)
- return;
-
- ictl->clock_rate = av->f; /* really, this is the rate we are */
- ictl->cardspec.ssi = *av;
-
- write_av9110 (sc, av->n, av->m, av->v, av->x, av->r);
-}
-
-/*
- * return hardware link status.
- * 0 == link is down, 1 == link is up.
- */
-static int
-lmc_ssi_get_link_status (lmc_softc_t * const sc)
-{
- u16 link_status;
- u32 ticks;
- int ret = 1;
- int hw_hdsk = 1;
-
- /*
- * missing CTS? Hmm. If we require CTS on, we may never get the
- * link to come up, so omit it in this test.
- *
- * Also, it seems that with a loopback cable, DCD isn't asserted,
- * so just check for things like this:
- * DSR _must_ be asserted.
- * One of DCD or CTS must be asserted.
- */
-
- /* LMC 1000 (SSI) LED definitions
- * led0 Green = power to adapter, Gate Array loaded &
- * driver attached
- * led1 Green = DSR and DTR and RTS and CTS are set
- * led2 Green = Cable detected
- * led3 red = No timing is available from the
- * cable or the on-board frequency
- * generator.
- */
-
- link_status = lmc_mii_readreg (sc, 0, 16);
-
- /* Is the transmit clock still available */
- ticks = LMC_CSR_READ (sc, csr_gp_timer);
- ticks = 0x0000ffff - (ticks & 0x0000ffff);
-
- lmc_led_on (sc, LMC_MII16_LED0);
-
- /* ====== transmit clock determination ===== */
- if (sc->lmc_timing == LMC_CTL_CLOCK_SOURCE_INT) {
- lmc_led_off(sc, LMC_MII16_LED3);
- }
- else if (ticks == 0 ) { /* no clock found ? */
- ret = 0;
- if (sc->last_led_err[3] != 1) {
- sc->extra_stats.tx_lossOfClockCnt++;
- printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name);
- }
- sc->last_led_err[3] = 1;
- lmc_led_on (sc, LMC_MII16_LED3); /* turn ON red LED */
- }
- else {
- if(sc->last_led_err[3] == 1)
- printk(KERN_WARNING "%s: Clock Returned\n", sc->name);
- sc->last_led_err[3] = 0;
- lmc_led_off (sc, LMC_MII16_LED3); /* turn OFF red LED */
- }
-
- if ((link_status & LMC_MII16_SSI_DSR) == 0) { /* Also HSSI CA */
- ret = 0;
- hw_hdsk = 0;
- }
-
-#ifdef CONFIG_LMC_IGNORE_HARDWARE_HANDSHAKE
- if ((link_status & (LMC_MII16_SSI_CTS | LMC_MII16_SSI_DCD)) == 0){
- ret = 0;
- hw_hdsk = 0;
- }
-#endif
-
- if(hw_hdsk == 0){
- if(sc->last_led_err[1] != 1)
- printk(KERN_WARNING "%s: DSR not asserted\n", sc->name);
- sc->last_led_err[1] = 1;
- lmc_led_off(sc, LMC_MII16_LED1);
- }
- else {
- if(sc->last_led_err[1] != 0)
- printk(KERN_WARNING "%s: DSR now asserted\n", sc->name);
- sc->last_led_err[1] = 0;
- lmc_led_on(sc, LMC_MII16_LED1);
- }
-
- if(ret == 1) {
- lmc_led_on(sc, LMC_MII16_LED2); /* Over all good status? */
- }
-
- return ret;
-}
-
-static void
-lmc_ssi_set_link_status (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_LINK_UP)
- {
- sc->lmc_miireg16 |= (LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS);
- printk (LMC_PRINTF_FMT ": asserting DTR and RTS\n", LMC_PRINTF_ARGS);
- }
- else
- {
- sc->lmc_miireg16 &= ~(LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS);
- printk (LMC_PRINTF_FMT ": deasserting DTR and RTS\n", LMC_PRINTF_ARGS);
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-
-}
-
-/*
- * 0 == 16bit, 1 == 32bit
- */
-static void
-lmc_ssi_set_crc_length (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_CTL_CRC_LENGTH_32)
- {
- /* 32 bit */
- sc->lmc_miireg16 |= LMC_MII16_SSI_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
- sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4;
-
- }
- else
- {
- /* 16 bit */
- sc->lmc_miireg16 &= ~LMC_MII16_SSI_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
- sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2;
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-/*
- * These are bits to program the ssi frequency generator
- */
-static inline void
-write_av9110_bit (lmc_softc_t * sc, int c)
-{
- /*
- * set the data bit as we need it.
- */
- sc->lmc_gpio &= ~(LMC_GEP_CLK);
- if (c & 0x01)
- sc->lmc_gpio |= LMC_GEP_DATA;
- else
- sc->lmc_gpio &= ~(LMC_GEP_DATA);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
-
- /*
- * set the clock to high
- */
- sc->lmc_gpio |= LMC_GEP_CLK;
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
-
- /*
- * set the clock to low again.
- */
- sc->lmc_gpio &= ~(LMC_GEP_CLK);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
-}
-
-static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r)
-{
- int i;
-
-#if 0
- printk (LMC_PRINTF_FMT ": speed %u, %d %d %d %d %d\n",
- LMC_PRINTF_ARGS, sc->ictl.clock_rate, n, m, v, x, r);
-#endif
-
- sc->lmc_gpio |= LMC_GEP_SSI_GENERATOR;
- sc->lmc_gpio &= ~(LMC_GEP_DATA | LMC_GEP_CLK);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
-
- /*
- * Set the TXCLOCK, GENERATOR, SERIAL, and SERIALCLK
- * as outputs.
- */
- lmc_gpio_mkoutput (sc, (LMC_GEP_DATA | LMC_GEP_CLK
- | LMC_GEP_SSI_GENERATOR));
-
- sc->lmc_gpio &= ~(LMC_GEP_SSI_GENERATOR);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
-
- /*
- * a shifting we will go...
- */
- for (i = 0; i < 7; i++)
- write_av9110_bit (sc, n >> i);
- for (i = 0; i < 7; i++)
- write_av9110_bit (sc, m >> i);
- for (i = 0; i < 1; i++)
- write_av9110_bit (sc, v >> i);
- for (i = 0; i < 2; i++)
- write_av9110_bit (sc, x >> i);
- for (i = 0; i < 2; i++)
- write_av9110_bit (sc, r >> i);
- for (i = 0; i < 5; i++)
- write_av9110_bit (sc, 0x17 >> i);
-
- /*
- * stop driving serial-related signals
- */
- lmc_gpio_mkinput (sc,
- (LMC_GEP_DATA | LMC_GEP_CLK
- | LMC_GEP_SSI_GENERATOR));
-}
-
-static void lmc_ssi_watchdog(lmc_softc_t * const sc)
-{
- u16 mii17 = lmc_mii_readreg(sc, 0, 17);
- if (((mii17 >> 3) & 7) == 7)
- lmc_led_off(sc, LMC_MII16_LED2);
- else
- lmc_led_on(sc, LMC_MII16_LED2);
-}
-
-/*
- * T1 methods
- */
-
-/*
- * The framer regs are multiplexed through MII regs 17 & 18
- * write the register address to MII reg 17 and the * data to MII reg 18. */
-static void
-lmc_t1_write (lmc_softc_t * const sc, int a, int d)
-{
- lmc_mii_writereg (sc, 0, 17, a);
- lmc_mii_writereg (sc, 0, 18, d);
-}
-
-/* Save a warning
-static int
-lmc_t1_read (lmc_softc_t * const sc, int a)
-{
- lmc_mii_writereg (sc, 0, 17, a);
- return lmc_mii_readreg (sc, 0, 18);
-}
-*/
-
-
-static void
-lmc_t1_init (lmc_softc_t * const sc)
-{
- u16 mii16;
- int i;
-
- sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200;
- mii16 = lmc_mii_readreg (sc, 0, 16);
-
- /* reset 8370 */
- mii16 &= ~LMC_MII16_T1_RST;
- lmc_mii_writereg (sc, 0, 16, mii16 | LMC_MII16_T1_RST);
- lmc_mii_writereg (sc, 0, 16, mii16);
-
- /* set T1 or E1 line. Uses sc->lmcmii16 reg in function so update it */
- sc->lmc_miireg16 = mii16;
- lmc_t1_set_circuit_type(sc, LMC_CTL_CIRCUIT_TYPE_T1);
- mii16 = sc->lmc_miireg16;
-
- lmc_t1_write (sc, 0x01, 0x1B); /* CR0 - primary control */
- lmc_t1_write (sc, 0x02, 0x42); /* JAT_CR - jitter atten config */
- lmc_t1_write (sc, 0x14, 0x00); /* LOOP - loopback config */
- lmc_t1_write (sc, 0x15, 0x00); /* DL3_TS - external data link timeslot */
- lmc_t1_write (sc, 0x18, 0xFF); /* PIO - programmable I/O */
- lmc_t1_write (sc, 0x19, 0x30); /* POE - programmable OE */
- lmc_t1_write (sc, 0x1A, 0x0F); /* CMUX - clock input mux */
- lmc_t1_write (sc, 0x20, 0x41); /* LIU_CR - RX LIU config */
- lmc_t1_write (sc, 0x22, 0x76); /* RLIU_CR - RX LIU config */
- lmc_t1_write (sc, 0x40, 0x03); /* RCR0 - RX config */
- lmc_t1_write (sc, 0x45, 0x00); /* RALM - RX alarm config */
- lmc_t1_write (sc, 0x46, 0x05); /* LATCH - RX alarm/err/cntr latch */
- lmc_t1_write (sc, 0x68, 0x40); /* TLIU_CR - TX LIU config */
- lmc_t1_write (sc, 0x70, 0x0D); /* TCR0 - TX framer config */
- lmc_t1_write (sc, 0x71, 0x05); /* TCR1 - TX config */
- lmc_t1_write (sc, 0x72, 0x0B); /* TFRM - TX frame format */
- lmc_t1_write (sc, 0x73, 0x00); /* TERROR - TX error insert */
- lmc_t1_write (sc, 0x74, 0x00); /* TMAN - TX manual Sa/FEBE config */
- lmc_t1_write (sc, 0x75, 0x00); /* TALM - TX alarm signal config */
- lmc_t1_write (sc, 0x76, 0x00); /* TPATT - TX test pattern config */
- lmc_t1_write (sc, 0x77, 0x00); /* TLB - TX inband loopback config */
- lmc_t1_write (sc, 0x90, 0x05); /* CLAD_CR - clock rate adapter config */
- lmc_t1_write (sc, 0x91, 0x05); /* CSEL - clad freq sel */
- lmc_t1_write (sc, 0xA6, 0x00); /* DL1_CTL - DL1 control */
- lmc_t1_write (sc, 0xB1, 0x00); /* DL2_CTL - DL2 control */
- lmc_t1_write (sc, 0xD0, 0x47); /* SBI_CR - sys bus iface config */
- lmc_t1_write (sc, 0xD1, 0x70); /* RSB_CR - RX sys bus config */
- lmc_t1_write (sc, 0xD4, 0x30); /* TSB_CR - TX sys bus config */
- for (i = 0; i < 32; i++)
- {
- lmc_t1_write (sc, 0x0E0 + i, 0x00); /* SBCn - sys bus per-channel ctl */
- lmc_t1_write (sc, 0x100 + i, 0x00); /* TPCn - TX per-channel ctl */
- lmc_t1_write (sc, 0x180 + i, 0x00); /* RPCn - RX per-channel ctl */
- }
- for (i = 1; i < 25; i++)
- {
- lmc_t1_write (sc, 0x0E0 + i, 0x0D); /* SBCn - sys bus per-channel ctl */
- }
-
- mii16 |= LMC_MII16_T1_XOE;
- lmc_mii_writereg (sc, 0, 16, mii16);
- sc->lmc_miireg16 = mii16;
-}
-
-static void
-lmc_t1_default (lmc_softc_t * const sc)
-{
- sc->lmc_miireg16 = LMC_MII16_LED_ALL;
- sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN);
- sc->lmc_media->set_circuit_type (sc, LMC_CTL_CIRCUIT_TYPE_T1);
- sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16);
- /* Right now we can only clock from out internal source */
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
-}
-/* * Given a user provided state, set ourselves up to match it. This will * always reset the card if needed.
- */
-static void
-lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- if (ctl == NULL)
- {
- sc->lmc_media->set_circuit_type (sc, sc->ictl.circuit_type);
- lmc_set_protocol (sc, NULL);
-
- return;
- }
- /*
- * check for change in circuit type */
- if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_T1
- && sc->ictl.circuit_type ==
- LMC_CTL_CIRCUIT_TYPE_E1) sc->lmc_media->set_circuit_type (sc,
- LMC_CTL_CIRCUIT_TYPE_E1);
- else if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_E1
- && sc->ictl.circuit_type == LMC_CTL_CIRCUIT_TYPE_T1)
- sc->lmc_media->set_circuit_type (sc, LMC_CTL_CIRCUIT_TYPE_T1);
- lmc_set_protocol (sc, ctl);
-}
-/*
- * return hardware link status.
- * 0 == link is down, 1 == link is up.
- */ static int
-lmc_t1_get_link_status (lmc_softc_t * const sc)
-{
- u16 link_status;
- int ret = 1;
-
- /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions
- * led0 yellow = far-end adapter is in Red alarm condition
- * led1 blue = received an Alarm Indication signal
- * (upstream failure)
- * led2 Green = power to adapter, Gate Array loaded & driver
- * attached
- * led3 red = Loss of Signal (LOS) or out of frame (OOF)
- * conditions detected on T3 receive signal
- */
- lmc_led_on(sc, LMC_DS3_LED2);
-
- lmc_mii_writereg (sc, 0, 17, T1FRAMER_ALARM1_STATUS);
- link_status = lmc_mii_readreg (sc, 0, 18);
-
-
- if (link_status & T1F_RAIS) { /* turn on blue LED */
- ret = 0;
- if(sc->last_led_err[1] != 1){
- printk(KERN_WARNING "%s: Receive AIS/Blue Alarm. Far end in RED alarm\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED1);
- sc->last_led_err[1] = 1;
- }
- else {
- if(sc->last_led_err[1] != 0){
- printk(KERN_WARNING "%s: End AIS/Blue Alarm\n", sc->name);
- }
- lmc_led_off (sc, LMC_DS3_LED1);
- sc->last_led_err[1] = 0;
- }
-
- /*
- * Yellow Alarm is nasty evil stuff, looks at data patterns
- * inside the channel and confuses it with HDLC framing
- * ignore all yellow alarms.
- *
- * Do listen to MultiFrame Yellow alarm which while implemented
- * different ways isn't in the channel and hence somewhat
- * more reliable
- */
-
- if (link_status & T1F_RMYEL) {
- ret = 0;
- if(sc->last_led_err[0] != 1){
- printk(KERN_WARNING "%s: Receive Yellow AIS Alarm\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED0);
- sc->last_led_err[0] = 1;
- }
- else {
- if(sc->last_led_err[0] != 0){
- printk(KERN_WARNING "%s: End of Yellow AIS Alarm\n", sc->name);
- }
- lmc_led_off(sc, LMC_DS3_LED0);
- sc->last_led_err[0] = 0;
- }
-
- /*
- * Loss of signal and los of frame
- * Use the green bit to identify which one lit the led
- */
- if(link_status & T1F_RLOF){
- ret = 0;
- if(sc->last_led_err[3] != 1){
- printk(KERN_WARNING "%s: Local Red Alarm: Loss of Framing\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED3);
- sc->last_led_err[3] = 1;
-
- }
- else {
- if(sc->last_led_err[3] != 0){
- printk(KERN_WARNING "%s: End Red Alarm (LOF)\n", sc->name);
- }
- if( ! (link_status & T1F_RLOS))
- lmc_led_off(sc, LMC_DS3_LED3);
- sc->last_led_err[3] = 0;
- }
-
- if(link_status & T1F_RLOS){
- ret = 0;
- if(sc->last_led_err[2] != 1){
- printk(KERN_WARNING "%s: Local Red Alarm: Loss of Signal\n", sc->name);
- }
- lmc_led_on(sc, LMC_DS3_LED3);
- sc->last_led_err[2] = 1;
-
- }
- else {
- if(sc->last_led_err[2] != 0){
- printk(KERN_WARNING "%s: End Red Alarm (LOS)\n", sc->name);
- }
- if( ! (link_status & T1F_RLOF))
- lmc_led_off(sc, LMC_DS3_LED3);
- sc->last_led_err[2] = 0;
- }
-
- sc->lmc_xinfo.t1_alarm1_status = link_status;
-
- lmc_mii_writereg (sc, 0, 17, T1FRAMER_ALARM2_STATUS);
- sc->lmc_xinfo.t1_alarm2_status = lmc_mii_readreg (sc, 0, 18);
-
- return ret;
-}
-
-/*
- * 1 == T1 Circuit Type , 0 == E1 Circuit Type
- */
-static void
-lmc_t1_set_circuit_type (lmc_softc_t * const sc, int ie)
-{
- if (ie == LMC_CTL_CIRCUIT_TYPE_T1) {
- sc->lmc_miireg16 |= LMC_MII16_T1_Z;
- sc->ictl.circuit_type = LMC_CTL_CIRCUIT_TYPE_T1;
- printk(KERN_INFO "%s: In T1 Mode\n", sc->name);
- }
- else {
- sc->lmc_miireg16 &= ~LMC_MII16_T1_Z;
- sc->ictl.circuit_type = LMC_CTL_CIRCUIT_TYPE_E1;
- printk(KERN_INFO "%s: In E1 Mode\n", sc->name);
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-
-}
-
-/*
- * 0 == 16bit, 1 == 32bit */
-static void
-lmc_t1_set_crc_length (lmc_softc_t * const sc, int state)
-{
- if (state == LMC_CTL_CRC_LENGTH_32)
- {
- /* 32 bit */
- sc->lmc_miireg16 |= LMC_MII16_T1_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32;
- sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4;
-
- }
- else
- {
- /* 16 bit */ sc->lmc_miireg16 &= ~LMC_MII16_T1_CRC;
- sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16;
- sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2;
-
- }
-
- lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16);
-}
-
-/*
- * 1 == internal, 0 == external
- */
-static void
-lmc_t1_set_clock (lmc_softc_t * const sc, int ie)
-{
- int old;
- old = ie;
- if (ie == LMC_CTL_CLOCK_SOURCE_EXT)
- {
- sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK);
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT;
- if(old != ie)
- printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS);
- }
- else
- {
- sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK;
- LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio);
- sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT;
- if(old != ie)
- printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS);
- }
-}
-
-static void
-lmc_t1_watchdog (lmc_softc_t * const sc)
-{
-}
-
-static void
-lmc_set_protocol (lmc_softc_t * const sc, lmc_ctl_t * ctl)
-{
- if (!ctl)
- sc->ictl.keepalive_onoff = LMC_CTL_ON;
-}
diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
deleted file mode 100644
index e5487616a816..000000000000
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
- /*
- * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
- * All rights reserved. www.lanmedia.com
- *
- * This code is written by:
- * Andrew Stanley-Jones (asj@cban.com)
- * Rob Braun (bbraun@vix.com),
- * Michael Graff (explorer@vix.com) and
- * Matt Thomas (matt@3am-software.com).
- *
- * With Help By:
- * David Boggs
- * Ron Crane
- * Allan Cox
- *
- * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/inet.h>
-#include <linux/workqueue.h>
-#include <linux/proc_fs.h>
-#include <linux/bitops.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/smp.h>
-
-#include "lmc.h"
-#include "lmc_var.h"
-#include "lmc_debug.h"
-#include "lmc_ioctl.h"
-#include "lmc_proto.h"
-
-// attach
-void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/
-{
- if (sc->if_type == LMC_NET) {
- struct net_device *dev = sc->lmc_device;
- /*
- * They set a few basics because they don't use HDLC
- */
- dev->flags |= IFF_POINTOPOINT;
- dev->hard_header_len = 0;
- dev->addr_len = 0;
- }
-}
-
-int lmc_proto_open(lmc_softc_t *sc)
-{
- int ret = 0;
-
- if (sc->if_type == LMC_PPP) {
- ret = hdlc_open(sc->lmc_device);
- if (ret < 0)
- printk(KERN_WARNING "%s: HDLC open failed: %d\n",
- sc->name, ret);
- }
- return ret;
-}
-
-void lmc_proto_close(lmc_softc_t *sc)
-{
- if (sc->if_type == LMC_PPP)
- hdlc_close(sc->lmc_device);
-}
-
-__be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
-{
- switch(sc->if_type){
- case LMC_PPP:
- return hdlc_type_trans(skb, sc->lmc_device);
- case LMC_NET:
- return htons(ETH_P_802_2);
- case LMC_RAW: /* Packet type for skbuff kind of useless */
- return htons(ETH_P_802_2);
- default:
- printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name);
- return htons(ETH_P_802_2);
- }
-}
-
-void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
-{
- switch(sc->if_type){
- case LMC_PPP:
- case LMC_NET:
- default:
- netif_rx(skb);
- break;
- case LMC_RAW:
- break;
- }
-}
diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h
deleted file mode 100644
index e56e7072de44..000000000000
--- a/drivers/net/wan/lmc/lmc_proto.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LMC_PROTO_H_
-#define _LMC_PROTO_H_
-
-#include <linux/hdlc.h>
-
-void lmc_proto_attach(lmc_softc_t *sc);
-int lmc_proto_open(lmc_softc_t *sc);
-void lmc_proto_close(lmc_softc_t *sc);
-__be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb);
-void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb);
-
-static inline lmc_softc_t* dev_to_sc(struct net_device *dev)
-{
- return (lmc_softc_t *)dev_to_hdlc(dev)->priv;
-}
-
-#endif
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
deleted file mode 100644
index 99f0aa787a35..000000000000
--- a/drivers/net/wan/lmc/lmc_var.h
+++ /dev/null
@@ -1,468 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-#ifndef _LMC_VAR_H_
-#define _LMC_VAR_H_
-
- /*
- * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
- * All rights reserved. www.lanmedia.com
- *
- * This code is written by:
- * Andrew Stanley-Jones (asj@cban.com)
- * Rob Braun (bbraun@vix.com),
- * Michael Graff (explorer@vix.com) and
- * Matt Thomas (matt@3am-software.com).
- */
-
-#include <linux/timer.h>
-
-/*
- * basic definitions used in lmc include files
- */
-
-typedef struct lmc___softc lmc_softc_t;
-typedef struct lmc___media lmc_media_t;
-typedef struct lmc___ctl lmc_ctl_t;
-
-#define lmc_csrptr_t unsigned long
-
-#define LMC_REG_RANGE 0x80
-
-#define LMC_PRINTF_FMT "%s"
-#define LMC_PRINTF_ARGS (sc->lmc_device->name)
-
-#define TX_TIMEOUT (2*HZ)
-
-#define LMC_TXDESCS 32
-#define LMC_RXDESCS 32
-
-#define LMC_LINK_UP 1
-#define LMC_LINK_DOWN 0
-
-/* These macros for generic read and write to and from the dec chip */
-#define LMC_CSR_READ(sc, csr) \
- inl((sc)->lmc_csrs.csr)
-#define LMC_CSR_WRITE(sc, reg, val) \
- outl((val), (sc)->lmc_csrs.reg)
-
-//#ifdef _LINUX_DELAY_H
-// #define SLOW_DOWN_IO udelay(2);
-// #undef __SLOW_DOWN_IO
-// #define __SLOW_DOWN_IO udelay(2);
-//#endif
-
-#define DELAY(n) SLOW_DOWN_IO
-
-#define lmc_delay() inl(sc->lmc_csrs.csr_9)
-
-/* This macro sync's up with the mii so that reads and writes can take place */
-#define LMC_MII_SYNC(sc) do {int n=32; while( n >= 0 ) { \
- LMC_CSR_WRITE((sc), csr_9, 0x20000); \
- lmc_delay(); \
- LMC_CSR_WRITE((sc), csr_9, 0x30000); \
- lmc_delay(); \
- n--; }} while(0)
-
-struct lmc_regfile_t {
- lmc_csrptr_t csr_busmode; /* CSR0 */
- lmc_csrptr_t csr_txpoll; /* CSR1 */
- lmc_csrptr_t csr_rxpoll; /* CSR2 */
- lmc_csrptr_t csr_rxlist; /* CSR3 */
- lmc_csrptr_t csr_txlist; /* CSR4 */
- lmc_csrptr_t csr_status; /* CSR5 */
- lmc_csrptr_t csr_command; /* CSR6 */
- lmc_csrptr_t csr_intr; /* CSR7 */
- lmc_csrptr_t csr_missed_frames; /* CSR8 */
- lmc_csrptr_t csr_9; /* CSR9 */
- lmc_csrptr_t csr_10; /* CSR10 */
- lmc_csrptr_t csr_11; /* CSR11 */
- lmc_csrptr_t csr_12; /* CSR12 */
- lmc_csrptr_t csr_13; /* CSR13 */
- lmc_csrptr_t csr_14; /* CSR14 */
- lmc_csrptr_t csr_15; /* CSR15 */
-};
-
-#define csr_enetrom csr_9 /* 21040 */
-#define csr_reserved csr_10 /* 21040 */
-#define csr_full_duplex csr_11 /* 21040 */
-#define csr_bootrom csr_10 /* 21041/21140A/?? */
-#define csr_gp csr_12 /* 21140* */
-#define csr_watchdog csr_15 /* 21140* */
-#define csr_gp_timer csr_11 /* 21041/21140* */
-#define csr_srom_mii csr_9 /* 21041/21140* */
-#define csr_sia_status csr_12 /* 2104x */
-#define csr_sia_connectivity csr_13 /* 2104x */
-#define csr_sia_tx_rx csr_14 /* 2104x */
-#define csr_sia_general csr_15 /* 2104x */
-
-/* tulip length/control transmit descriptor definitions
- * used to define bits in the second tulip_desc_t field (length)
- * for the transmit descriptor -baz */
-
-#define LMC_TDES_FIRST_BUFFER_SIZE ((u32)(0x000007FF))
-#define LMC_TDES_SECOND_BUFFER_SIZE ((u32)(0x003FF800))
-#define LMC_TDES_HASH_FILTERING ((u32)(0x00400000))
-#define LMC_TDES_DISABLE_PADDING ((u32)(0x00800000))
-#define LMC_TDES_SECOND_ADDR_CHAINED ((u32)(0x01000000))
-#define LMC_TDES_END_OF_RING ((u32)(0x02000000))
-#define LMC_TDES_ADD_CRC_DISABLE ((u32)(0x04000000))
-#define LMC_TDES_SETUP_PACKET ((u32)(0x08000000))
-#define LMC_TDES_INVERSE_FILTERING ((u32)(0x10000000))
-#define LMC_TDES_FIRST_SEGMENT ((u32)(0x20000000))
-#define LMC_TDES_LAST_SEGMENT ((u32)(0x40000000))
-#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000))
-
-#define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER 11
-#define TDES_COLLISION_COUNT_BIT_NUMBER 3
-
-/* Constants for the RCV descriptor RDES */
-
-#define LMC_RDES_OVERFLOW ((u32)(0x00000001))
-#define LMC_RDES_CRC_ERROR ((u32)(0x00000002))
-#define LMC_RDES_DRIBBLING_BIT ((u32)(0x00000004))
-#define LMC_RDES_REPORT_ON_MII_ERR ((u32)(0x00000008))
-#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010))
-#define LMC_RDES_FRAME_TYPE ((u32)(0x00000020))
-#define LMC_RDES_COLLISION_SEEN ((u32)(0x00000040))
-#define LMC_RDES_FRAME_TOO_LONG ((u32)(0x00000080))
-#define LMC_RDES_LAST_DESCRIPTOR ((u32)(0x00000100))
-#define LMC_RDES_FIRST_DESCRIPTOR ((u32)(0x00000200))
-#define LMC_RDES_MULTICAST_FRAME ((u32)(0x00000400))
-#define LMC_RDES_RUNT_FRAME ((u32)(0x00000800))
-#define LMC_RDES_DATA_TYPE ((u32)(0x00003000))
-#define LMC_RDES_LENGTH_ERROR ((u32)(0x00004000))
-#define LMC_RDES_ERROR_SUMMARY ((u32)(0x00008000))
-#define LMC_RDES_FRAME_LENGTH ((u32)(0x3FFF0000))
-#define LMC_RDES_OWN_BIT ((u32)(0x80000000))
-
-#define RDES_FRAME_LENGTH_BIT_NUMBER 16
-
-#define LMC_RDES_ERROR_MASK ( (u32)( \
- LMC_RDES_OVERFLOW \
- | LMC_RDES_DRIBBLING_BIT \
- | LMC_RDES_REPORT_ON_MII_ERR \
- | LMC_RDES_COLLISION_SEEN ) )
-
-
-/*
- * Ioctl info
- */
-
-typedef struct {
- u32 n;
- u32 m;
- u32 v;
- u32 x;
- u32 r;
- u32 f;
- u32 exact;
-} lmc_av9110_t;
-
-/*
- * Common structure passed to the ioctl code.
- */
-struct lmc___ctl {
- u32 cardtype;
- u32 clock_source; /* HSSI, T1 */
- u32 clock_rate; /* T1 */
- u32 crc_length;
- u32 cable_length; /* DS3 */
- u32 scrambler_onoff; /* DS3 */
- u32 cable_type; /* T1 */
- u32 keepalive_onoff; /* protocol */
- u32 ticks; /* ticks/sec */
- union {
- lmc_av9110_t ssi;
- } cardspec;
- u32 circuit_type; /* T1 or E1 */
-};
-
-
-/*
- * Careful, look at the data sheet, there's more to this
- * structure than meets the eye. It should probably be:
- *
- * struct tulip_desc_t {
- * u8 own:1;
- * u32 status:31;
- * u32 control:10;
- * u32 buffer1;
- * u32 buffer2;
- * };
- * You could also expand status control to provide more bit information
- */
-
-struct tulip_desc_t {
- s32 status;
- s32 length;
- u32 buffer1;
- u32 buffer2;
-};
-
-/*
- * media independent methods to check on media status, link, light LEDs,
- * etc.
- */
-struct lmc___media {
- void (* init)(lmc_softc_t * const);
- void (* defaults)(lmc_softc_t * const);
- void (* set_status)(lmc_softc_t * const, lmc_ctl_t *);
- void (* set_clock_source)(lmc_softc_t * const, int);
- void (* set_speed)(lmc_softc_t * const, lmc_ctl_t *);
- void (* set_cable_length)(lmc_softc_t * const, int);
- void (* set_scrambler)(lmc_softc_t * const, int);
- int (* get_link_status)(lmc_softc_t * const);
- void (* set_link_status)(lmc_softc_t * const, int);
- void (* set_crc_length)(lmc_softc_t * const, int);
- void (* set_circuit_type)(lmc_softc_t * const, int);
- void (* watchdog)(lmc_softc_t * const);
-};
-
-
-#define STATCHECK 0xBEEFCAFE
-
-struct lmc_extra_statistics
-{
- u32 version_size;
- u32 lmc_cardtype;
-
- u32 tx_ProcTimeout;
- u32 tx_IntTimeout;
- u32 tx_NoCompleteCnt;
- u32 tx_MaxXmtsB4Int;
- u32 tx_TimeoutCnt;
- u32 tx_OutOfSyncPtr;
- u32 tx_tbusy0;
- u32 tx_tbusy1;
- u32 tx_tbusy_calls;
- u32 resetCount;
- u32 lmc_txfull;
- u32 tbusy;
- u32 dirtyTx;
- u32 lmc_next_tx;
- u32 otherTypeCnt;
- u32 lastType;
- u32 lastTypeOK;
- u32 txLoopCnt;
- u32 usedXmtDescripCnt;
- u32 txIndexCnt;
- u32 rxIntLoopCnt;
-
- u32 rx_SmallPktCnt;
- u32 rx_BadPktSurgeCnt;
- u32 rx_BuffAllocErr;
- u32 tx_lossOfClockCnt;
-
- /* T1 error counters */
- u32 framingBitErrorCount;
- u32 lineCodeViolationCount;
-
- u32 lossOfFrameCount;
- u32 changeOfFrameAlignmentCount;
- u32 severelyErroredFrameCount;
-
- u32 check;
-};
-
-typedef struct lmc_xinfo {
- u32 Magic0; /* BEEFCAFE */
-
- u32 PciCardType;
- u32 PciSlotNumber; /* PCI slot number */
-
- u16 DriverMajorVersion;
- u16 DriverMinorVersion;
- u16 DriverSubVersion;
-
- u16 XilinxRevisionNumber;
- u16 MaxFrameSize;
-
- u16 t1_alarm1_status;
- u16 t1_alarm2_status;
-
- int link_status;
- u32 mii_reg16;
-
- u32 Magic1; /* DEADBEEF */
-} LMC_XINFO;
-
-
-/*
- * forward decl
- */
-struct lmc___softc {
- char *name;
- u8 board_idx;
- struct lmc_extra_statistics extra_stats;
- struct net_device *lmc_device;
-
- int hang, rxdesc, bad_packet, some_counter;
- u32 txgo;
- struct lmc_regfile_t lmc_csrs;
- volatile u32 lmc_txtick;
- volatile u32 lmc_rxtick;
- u32 lmc_flags;
- u32 lmc_intrmask; /* our copy of csr_intr */
- u32 lmc_cmdmode; /* our copy of csr_cmdmode */
- u32 lmc_busmode; /* our copy of csr_busmode */
- u32 lmc_gpio_io; /* state of in/out settings */
- u32 lmc_gpio; /* state of outputs */
- struct sk_buff* lmc_txq[LMC_TXDESCS];
- struct sk_buff* lmc_rxq[LMC_RXDESCS];
- volatile
- struct tulip_desc_t lmc_rxring[LMC_RXDESCS];
- volatile
- struct tulip_desc_t lmc_txring[LMC_TXDESCS];
- unsigned int lmc_next_rx, lmc_next_tx;
- volatile
- unsigned int lmc_taint_tx, lmc_taint_rx;
- int lmc_tx_start, lmc_txfull;
- int lmc_txbusy;
- u16 lmc_miireg16;
- int lmc_ok;
- int last_link_status;
- int lmc_cardtype;
- u32 last_frameerr;
- lmc_media_t *lmc_media;
- struct timer_list timer;
- lmc_ctl_t ictl;
- u32 TxDescriptControlInit;
-
- int tx_TimeoutInd; /* additional driver state */
- int tx_TimeoutDisplay;
- unsigned int lastlmc_taint_tx;
- int lasttx_packets;
- u32 tx_clockState;
- u32 lmc_crcSize;
- LMC_XINFO lmc_xinfo;
- char lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */
- char lmc_timing; /* for HSSI and SSI */
- int got_irq;
-
- char last_led_err[4];
-
- u32 last_int;
- u32 num_int;
-
- spinlock_t lmc_lock;
- u16 if_type; /* HDLC/PPP or NET */
-
- /* Failure cases */
- u8 failed_ring;
- u8 failed_recv_alloc;
-
- /* Structure check */
- u32 check;
-};
-
-#define LMC_PCI_TIME 1
-#define LMC_EXT_TIME 0
-
-#define PKT_BUF_SZ 1542 /* was 1536 */
-
-/* CSR5 settings */
-#define TIMER_INT 0x00000800
-#define TP_LINK_FAIL 0x00001000
-#define TP_LINK_PASS 0x00000010
-#define NORMAL_INT 0x00010000
-#define ABNORMAL_INT 0x00008000
-#define RX_JABBER_INT 0x00000200
-#define RX_DIED 0x00000100
-#define RX_NOBUFF 0x00000080
-#define RX_INT 0x00000040
-#define TX_FIFO_UNDER 0x00000020
-#define TX_JABBER 0x00000008
-#define TX_NOBUFF 0x00000004
-#define TX_DIED 0x00000002
-#define TX_INT 0x00000001
-
-/* CSR6 settings */
-#define OPERATION_MODE 0x00000200 /* Full Duplex */
-#define PROMISC_MODE 0x00000040 /* Promiscuous Mode */
-#define RECEIVE_ALL 0x40000000 /* Receive All */
-#define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */
-
-/* Dec control registers CSR6 as well */
-#define LMC_DEC_ST 0x00002000
-#define LMC_DEC_SR 0x00000002
-
-/* CSR15 settings */
-#define RECV_WATCHDOG_DISABLE 0x00000010
-#define JABBER_DISABLE 0x00000001
-
-/* More settings */
-/*
- * aSR6 -- Command (Operation Mode) Register
- */
-#define TULIP_CMD_RECEIVEALL 0x40000000L /* (RW) Receivel all frames? */
-#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */
-#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */
-#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Forward (21140) */
-#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */
-#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */
-#define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */
-#define TULIP_CMD_OPERMODE 0x00000C00L /* (RW) Operating Mode */
-#define TULIP_CMD_PROMISCUOUS 0x00000041L /* (RW) Promiscuous Mode */
-#define TULIP_CMD_PASSBADPKT 0x00000008L /* (RW) Pass Bad Frames */
-#define TULIP_CMD_THRESHOLDCTL 0x0000C000L /* (RW) Threshold Control */
-
-#define TULIP_GP_PINSET 0x00000100L
-#define TULIP_BUSMODE_SWRESET 0x00000001L
-#define TULIP_WATCHDOG_TXDISABLE 0x00000001L
-#define TULIP_WATCHDOG_RXDISABLE 0x00000010L
-
-#define TULIP_STS_NORMALINTR 0x00010000L /* (RW) Normal Interrupt */
-#define TULIP_STS_ABNRMLINTR 0x00008000L /* (RW) Abnormal Interrupt */
-#define TULIP_STS_ERI 0x00004000L /* (RW) Early Receive Interrupt */
-#define TULIP_STS_SYSERROR 0x00002000L /* (RW) System Error */
-#define TULIP_STS_GTE 0x00000800L /* (RW) General Pupose Timer Exp */
-#define TULIP_STS_ETI 0x00000400L /* (RW) Early Transmit Interrupt */
-#define TULIP_STS_RXWT 0x00000200L /* (RW) Receiver Watchdog Timeout */
-#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receiver Process Stopped */
-#define TULIP_STS_RXNOBUF 0x00000080L /* (RW) Receive Buf Unavail */
-#define TULIP_STS_RXINTR 0x00000040L /* (RW) Receive Interrupt */
-#define TULIP_STS_TXUNDERFLOW 0x00000020L /* (RW) Transmit Underflow */
-#define TULIP_STS_TXJABER 0x00000008L /* (RW) Jabber timeout */
-#define TULIP_STS_TXNOBUF 0x00000004L
-#define TULIP_STS_TXSTOPPED 0x00000002L /* (RW) Transmit Process Stopped */
-#define TULIP_STS_TXINTR 0x00000001L /* (RW) Transmit Interrupt */
-
-#define TULIP_STS_RXS_STOPPED 0x00000000L /* 000 - Stopped */
-
-#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receive Process Stopped */
-#define TULIP_STS_RXNOBUF 0x00000080L
-
-#define TULIP_CMD_TXRUN 0x00002000L /* (RW) Start/Stop Transmitter */
-#define TULIP_CMD_RXRUN 0x00000002L /* (RW) Start/Stop Receive Filtering */
-#define TULIP_DSTS_TxDEFERRED 0x00000001 /* Initially Deferred */
-#define TULIP_DSTS_OWNER 0x80000000 /* Owner (1 = 21040) */
-#define TULIP_DSTS_RxMIIERR 0x00000008
-#define LMC_DSTS_ERRSUM (TULIP_DSTS_RxMIIERR)
-
-#define TULIP_DEFAULT_INTR_MASK (TULIP_STS_NORMALINTR \
- | TULIP_STS_RXINTR \
- | TULIP_STS_TXINTR \
- | TULIP_STS_ABNRMLINTR \
- | TULIP_STS_SYSERROR \
- | TULIP_STS_TXSTOPPED \
- | TULIP_STS_TXUNDERFLOW\
- | TULIP_STS_RXSTOPPED )
-
-#define DESC_OWNED_BY_SYSTEM ((u32)(0x00000000))
-#define DESC_OWNED_BY_DC21X4 ((u32)(0x80000000))
-
-#ifndef TULIP_CMD_RECEIVEALL
-#define TULIP_CMD_RECEIVEALL 0x40000000L
-#endif
-
-/* Adapter module number */
-#define LMC_ADAP_HSSI 2
-#define LMC_ADAP_DS3 3
-#define LMC_ADAP_SSI 4
-#define LMC_ADAP_T1 5
-
-#define LMC_MTU 1500
-
-#define LMC_CRC_LEN_16 2 /* 16-bit CRC */
-#define LMC_CRC_LEN_32 4
-
-#endif /* _LMC_VAR_H_ */
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.