diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 148 |
1 files changed, 135 insertions, 13 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 1d3231cc471a..7187958e40ca 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -137,9 +137,113 @@ config PCMCIA_RAYCS comment "Wireless 802.11b ISA/PCI cards support" depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) +config IPW2100 + tristate "Intel PRO/Wireless 2100 Network Connection" + depends on NET_RADIO && PCI && IEEE80211 + select FW_LOADER + ---help--- + A driver for the Intel PRO/Wireless 2100 Network + Connection 802.11b wireless network adapter. + + See <file:Documentation/networking/README.ipw2100> for information on + the capabilities currently enabled in this driver and for tips + for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2100.sf.net/>. Once you have the firmware image, you + will need to place it in /etc/firmware. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + If you want to compile the driver as a module ( = code which can be + inserted in and remvoed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ipw2100.ko. + +config IPW2100_MONITOR + bool "Enable promiscuous mode" + depends on IPW2100 + ---help--- + Enables promiscuous/monitor mode support for the ipw2100 driver. + With this feature compiled into the driver, you can switch to + promiscuous mode via the Wireless Tool's Monitor mode. While in this + mode, no packets can be sent. + +config IPW_DEBUG + bool "Enable full debugging output in IPW2100 module." + depends on IPW2100 + ---help--- + This option will enable debug tracing output for the IPW2100. + + This will result in the kernel module being ~60k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/bus/pci/drivers/ipw2100/debug_level + + This entry will only exist if this option is enabled. + + If you are not trying to debug or develop the IPW2100 driver, you + most likely want to say N here. + +config IPW2200 + tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" + depends on IEEE80211 && PCI + select FW_LOADER + ---help--- + A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network + Connection adapters. + + See <file:Documentation/networking/README.ipw2200> for + information on the capabilities currently enabled in this + driver and for tips for debugging issues and problems. + + In order to use this driver, you will need a firmware image for it. + You can obtain the firmware from + <http://ipw2200.sf.net/>. See the above referenced README.ipw2200 + for information on where to install the firmare images. + + You will also very likely need the Wireless Tools in order to + configure your card: + + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + + If you want to compile the driver as a module ( = code which can be + inserted in and remvoed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ipw2200.ko. + +config IPW_DEBUG + bool "Enable full debugging output in IPW2200 module." + depends on IPW2200 + ---help--- + This option will enable debug tracing output for the IPW2200. + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/bus/pci/drivers/ipw2200/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x00000FFO > /sys/bus/pci/drivers/ipw2200/debug_level + + You can find the list of debug mask values in + drivers/net/wireless/ipw2200.h + + If you are not trying to debug or develop the IPW2200 driver, you + most likely want to say N here. + config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on NET_RADIO && ISA && (PCI || BROKEN) + depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN) ---help--- This is the standard Linux driver to support Cisco/Aironet ISA and PCI 802.11 wireless cards. @@ -185,8 +289,8 @@ config APPLE_AIRPORT a non-standard interface config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES help Enable support for PCMCIA cards supported by the "Hermes" (aka orinoco) driver when used in PLX9052 based PCI adaptors. These @@ -195,12 +299,9 @@ config PLX_HERMES 802.11b PCMCIA cards can be used in desktop machines. The Netgear MA301 is such an adaptor. - Support for these adaptors is so far still incomplete and buggy. - You have been warned. - config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES help Enable support for PCMCIA cards supported by the "Hermes" (aka orinoco) driver when used in TMD7160 based PCI adaptors. These @@ -208,12 +309,18 @@ config TMD_HERMES PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that 802.11b PCMCIA cards can be used in desktop machines. - Support for these adaptors is so far still incomplete and buggy. - You have been warned. +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" - depends on PCI && HERMES && EXPERIMENTAL + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES help Enable support for PCI and mini-PCI 802.11b wireless NICs based on the Prism 2.5 chipset. These are true PCI cards, not the 802.11b @@ -268,9 +375,22 @@ config PCMCIA_HERMES configure your card and that /etc/pcmcia/wireless.opts works: <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on NET_RADIO && PCMCIA && HERMES + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at + <http://sourceforge.net/projects/orinoco/> + config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on NET_RADIO && PCMCIA + depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) ---help--- This is the standard Linux driver to support Cisco/Aironet PCMCIA 802.11 wireless cards. This driver is the same as the Aironet @@ -355,6 +475,8 @@ config PRISM54 say M here and read <file:Documentation/modules.txt>. The module will be called prism54.ko. +source "drivers/net/wireless/hostap/Kconfig" + # yes, this works even when no drivers are selected config NET_WIRELESS bool |