diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 56 |
1 files changed, 40 insertions, 16 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 3ef468893b3f..1b243c899bef 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -55,7 +55,7 @@ * type. * * 6. Comment each parameter part of the WMI command/event structure by - * using the 2 stars at the begining of C comment instead of one star to + * using the 2 stars at the beginning of C comment instead of one star to * enable HTML document generation using Doxygen. * */ @@ -180,6 +180,7 @@ enum wmi_service { WMI_SERVICE_MESH_NON_11S, WMI_SERVICE_PEER_STATS, WMI_SERVICE_RESTRT_CHNL_SUPPORT, + WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, WMI_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_PULL, WMI_SERVICE_TX_MODE_DYNAMIC, @@ -305,6 +306,7 @@ enum wmi_10_4_service { WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT, WMI_10_4_SERVICE_PEER_STATS, WMI_10_4_SERVICE_MESH_11S, + WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, WMI_10_4_SERVICE_TX_MODE_DYNAMIC, @@ -402,6 +404,7 @@ static inline char *wmi_service_name(int service_id) SVCSTR(WMI_SERVICE_MESH_NON_11S); SVCSTR(WMI_SERVICE_PEER_STATS); SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT); + SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT); SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY); SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL); SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC); @@ -652,6 +655,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, WMI_SERVICE_PEER_STATS, len); SVCMAP(WMI_10_4_SERVICE_MESH_11S, WMI_SERVICE_MESH_11S, len); + SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, + WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len); SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_ONLY, len); SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL, @@ -2082,7 +2087,7 @@ struct wmi_resource_config { * In offload mode target supports features like WOW, chatter and * other protocol offloads. In order to support them some * functionalities like reorder buffering, PN checking need to be - * done in target. This determines maximum number of peers suported + * done in target. This determines maximum number of peers supported * by target in offload mode */ __le32 num_offload_peers; @@ -2263,7 +2268,7 @@ struct wmi_resource_config { * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event - * and is overriden by the OS shim as required. + * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; @@ -2445,7 +2450,7 @@ struct wmi_resource_config_10x { * Max. number of Tx fragments per MSDU * This parameter controls the max number of Tx fragments per MSDU. * This is sent by the target as part of the WMI_SERVICE_READY event - * and is overriden by the OS shim as required. + * and is overridden by the OS shim as required. */ __le32 max_frag_entries; } __packed; @@ -2739,7 +2744,7 @@ struct wmi_init_cmd { struct wmi_host_mem_chunks mem_chunks; } __packed; -/* _10x stucture is from 10.X FW API */ +/* _10x structure is from 10.X FW API */ struct wmi_init_cmd_10x { struct wmi_resource_config_10x resource_config; struct wmi_host_mem_chunks mem_chunks; @@ -3962,7 +3967,7 @@ struct wmi_pdev_stats_tx { /* illegal rate phy errors */ __le32 illgl_rate_phy_err; - /* wal pdev continous xretry */ + /* wal pdev continuous xretry */ __le32 pdev_cont_xretry; /* wal pdev continous xretry */ @@ -4217,10 +4222,10 @@ struct wmi_10_2_stats_event { */ struct wmi_pdev_stats_base { __le32 chan_nf; - __le32 tx_frame_count; - __le32 rx_frame_count; - __le32 rx_clear_count; - __le32 cycle_count; + __le32 tx_frame_count; /* Cycles spent transmitting frames */ + __le32 rx_frame_count; /* Cycles spent receiving frames */ + __le32 rx_clear_count; /* Total channel busy time, evidently */ + __le32 cycle_count; /* Total on-channel time */ __le32 phy_err_count; __le32 chan_tx_pwr; } __packed; @@ -4456,9 +4461,9 @@ struct wmi_vdev_start_request_cmd { __le32 flags; /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */ struct wmi_ssid ssid; - /* beacon/probe reponse xmit rate. Applicable for SoftAP. */ + /* beacon/probe response xmit rate. Applicable for SoftAP. */ __le32 bcn_tx_rate; - /* beacon/probe reponse xmit power. Applicable for SoftAP. */ + /* beacon/probe response xmit power. Applicable for SoftAP. */ __le32 bcn_tx_power; /* number of p2p NOA descriptor(s) from scan entry */ __le32 num_noa_descriptors; @@ -4686,7 +4691,7 @@ enum wmi_vdev_param { WMI_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_VDEV_PARAM_LISTEN_INTERVAL, - /* muticast rate in Mbps */ + /* multicast rate in Mbps */ WMI_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_VDEV_PARAM_MGMT_TX_RATE, @@ -4817,7 +4822,7 @@ enum wmi_10x_vdev_param { WMI_10X_VDEV_PARAM_BEACON_INTERVAL, /* Listen interval in TUs */ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL, - /* muticast rate in Mbps */ + /* multicast rate in Mbps */ WMI_10X_VDEV_PARAM_MULTICAST_RATE, /* management frame rate in Mbps */ WMI_10X_VDEV_PARAM_MGMT_TX_RATE, @@ -5062,7 +5067,7 @@ struct wmi_vdev_simple_event { } __packed; /* VDEV start response status codes */ -/* VDEV succesfully started */ +/* VDEV successfully started */ #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0 /* requested VDEV not found */ @@ -5378,7 +5383,7 @@ enum wmi_sta_ps_param_pspoll_count { #define WMI_UAPSD_AC_TYPE_TRIG 1 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \ - ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1 << (ac << 1)) : (1 << ((ac << 1) + 1))) + (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1)) enum wmi_sta_ps_param_uapsd { WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0), @@ -6169,6 +6174,20 @@ struct wmi_dbglog_cfg_cmd { __le32 config_valid; } __packed; +struct wmi_10_4_dbglog_cfg_cmd { + /* bitmask to hold mod id config*/ + __le64 module_enable; + + /* see ATH10K_DBGLOG_CFG_ */ + __le32 config_enable; + + /* mask of module id bits to be changed */ + __le64 module_valid; + + /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */ + __le32 config_valid; +} __packed; + enum wmi_roam_reason { WMI_ROAM_REASON_BETTER_AP = 1, WMI_ROAM_REASON_BEACON_MISS = 2, @@ -6296,6 +6315,10 @@ struct wmi_roam_ev_arg { __le32 rssi; }; +struct wmi_echo_ev_arg { + __le32 value; +}; + struct wmi_pdev_temperature_event { /* temperature value in Celcius degree */ __le32 temperature; @@ -6624,5 +6647,6 @@ void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar, char *buf); int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar, enum wmi_vdev_subtype subtype); +int ath10k_wmi_barrier(struct ath10k *ar); #endif /* _WMI_H_ */ |