diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/reset.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reset.c | 230 |
1 files changed, 171 insertions, 59 deletions
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 2abac257b4b4..4aed3a3ab109 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -19,9 +19,9 @@ * */ -/*****************************\ - Reset functions and helpers -\*****************************/ +/****************************\ + Reset function and helpers +\****************************/ #include <asm/unaligned.h> @@ -33,14 +33,36 @@ #include "debug.h" +/** + * DOC: Reset function and helpers + * + * Here we implement the main reset routine, used to bring the card + * to a working state and ready to receive. We also handle routines + * that don't fit on other places such as clock, sleep and power control + */ + + /******************\ * Helper functions * \******************/ -/* - * Check if a register write has been completed +/** + * ath5k_hw_register_timeout() - Poll a register for a flag/field change + * @ah: The &struct ath5k_hw + * @reg: The register to read + * @flag: The flag/field to check on the register + * @val: The field value we expect (if we check a field) + * @is_set: Instead of checking if the flag got cleared, check if it got set + * + * Some registers contain flags that indicate that an operation is + * running. We use this function to poll these registers and check + * if these flags get cleared. We also use it to poll a register + * field (containing multiple flags) until it gets a specific value. + * + * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 */ -int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, +int +ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set) { int i; @@ -64,35 +86,48 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, \*************************/ /** - * ath5k_hw_htoclock - Translate usec to hw clock units - * + * ath5k_hw_htoclock() - Translate usec to hw clock units * @ah: The &struct ath5k_hw * @usec: value in microseconds + * + * Translate usecs to hw clock units based on the current + * hw clock rate. + * + * Returns number of clock units */ -unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) +unsigned int +ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) { struct ath_common *common = ath5k_hw_common(ah); return usec * common->clockrate; } /** - * ath5k_hw_clocktoh - Translate hw clock units to usec + * ath5k_hw_clocktoh() - Translate hw clock units to usec + * @ah: The &struct ath5k_hw * @clock: value in hw clock units + * + * Translate hw clock units to usecs based on the current + * hw clock rate. + * + * Returns number of usecs */ -unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +unsigned int +ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) { struct ath_common *common = ath5k_hw_common(ah); return clock / common->clockrate; } /** - * ath5k_hw_init_core_clock - Initialize core clock - * - * @ah The &struct ath5k_hw + * ath5k_hw_init_core_clock() - Initialize core clock + * @ah: The &struct ath5k_hw * - * Initialize core clock parameters (usec, usec32, latencies etc). + * Initialize core clock parameters (usec, usec32, latencies etc), + * based on current bwmode and chipset properties. */ -static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) +static void +ath5k_hw_init_core_clock(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; struct ath_common *common = ath5k_hw_common(ah); @@ -227,16 +262,21 @@ static void ath5k_hw_init_core_clock(struct ath5k_hw *ah) } } -/* +/** + * ath5k_hw_set_sleep_clock() - Setup sleep clock operation + * @ah: The &struct ath5k_hw + * @enable: Enable sleep clock operation (false to disable) + * * If there is an external 32KHz crystal available, use it * as ref. clock instead of 32/40MHz clock and baseband clocks * to save power during sleep or restore normal 32/40MHz * operation. * - * XXX: When operating on 32KHz certain PHY registers (27 - 31, - * 123 - 127) require delay on access. + * NOTE: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. */ -static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) +static void +ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 scal, spending, sclock; @@ -340,10 +380,19 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) * Reset/Sleep control * \*********************/ -/* - * Reset chipset +/** + * ath5k_hw_nic_reset() - Reset the various chipset units + * @ah: The &struct ath5k_hw + * @val: Mask to indicate what units to reset + * + * To reset the various chipset units we need to write + * the mask to AR5K_RESET_CTL and poll the register until + * all flags are cleared. + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) */ -static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +static int +ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) { int ret; u32 mask = val ? val : ~0U; @@ -357,7 +406,7 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); /* Wait at least 128 PCI clocks */ - udelay(15); + usleep_range(15, 20); if (ah->ah_version == AR5K_AR5210) { val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA @@ -382,12 +431,17 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) return ret; } -/* - * Reset AHB chipset - * AR5K_RESET_CTL_PCU flag resets WMAC - * AR5K_RESET_CTL_BASEBAND flag resets WBB +/** + * ath5k_hw_wisoc_reset() - Reset AHB chipset + * @ah: The &struct ath5k_hw + * @flags: Mask to indicate what units to reset + * + * Same as ath5k_hw_nic_reset but for AHB based devices + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) */ -static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) +static int +ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) { u32 mask = flags ? flags : ~0U; u32 __iomem *reg; @@ -422,7 +476,7 @@ static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) regval = __raw_readl(reg); __raw_writel(regval | val, reg); regval = __raw_readl(reg); - udelay(100); + usleep_range(100, 150); /* Bring BB/MAC out of reset */ __raw_writel(regval & ~val, reg); @@ -439,11 +493,23 @@ static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) return 0; } - -/* - * Sleep control +/** + * ath5k_hw_set_power_mode() - Set power mode + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_power_mode + * @set_chip: Set to true to write sleep control register + * @sleep_duration: How much time the device is allowed to sleep + * when sleep logic is enabled (in 128 microsecond increments). + * + * This function is used to configure sleep policy and allowed + * sleep modes. For more information check out the sleep control + * register on reg.h and STA_ID1. + * + * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid + * mode is requested. */ -static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, +static int +ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; @@ -493,7 +559,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); - udelay(15); + usleep_range(15, 20); for (i = 200; i > 0; i--) { /* Check if the chip did wake up */ @@ -502,7 +568,7 @@ static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; /* Wait a bit and retry */ - udelay(50); + usleep_range(50, 75); ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, AR5K_SLEEP_CTL); } @@ -523,17 +589,20 @@ commit: return 0; } -/* - * Put device on hold +/** + * ath5k_hw_on_hold() - Put device on hold + * @ah: The &struct ath5k_hw * - * Put MAC and Baseband on warm reset and - * keep that state (don't clean sleep control - * register). After this MAC and Baseband are - * disabled and a full reset is needed to come - * back. This way we save as much power as possible + * Put MAC and Baseband on warm reset and keep that state + * (don't clean sleep control register). After this MAC + * and Baseband are disabled and a full reset is needed + * to come back. This way we save as much power as possible * without putting the card on full sleep. + * + * Returns 0 on success or -EIO on error */ -int ath5k_hw_on_hold(struct ath5k_hw *ah) +int +ath5k_hw_on_hold(struct ath5k_hw *ah) { struct pci_dev *pdev = ah->pdev; u32 bus_flags; @@ -543,7 +612,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) return 0; /* Make sure device is awake */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); return ret; @@ -563,7 +632,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND | bus_flags); @@ -575,7 +644,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) } /* ...wakeup again!*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to put device on hold\n"); return ret; @@ -584,11 +653,18 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah) return ret; } -/* +/** + * ath5k_hw_nic_wakeup() - Force card out of sleep + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * * Bring up MAC + PHY Chips and program PLL - * Channel is NULL for the initial wakeup. + * NOTE: Channel is NULL for the initial wakeup. + * + * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos */ -int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) +int +ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct pci_dev *pdev = ah->pdev; u32 turbo, mode, clock, bus_flags; @@ -600,7 +676,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { /* Wakeup the device */ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); return ret; @@ -621,7 +697,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); - mdelay(2); + usleep_range(2000, 2500); } else { if (ath5k_get_bus_type(ah) == ATH_AHB) ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | @@ -637,7 +713,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) } /* ...wakeup again!...*/ - ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0); + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); if (ret) { ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); return ret; @@ -739,7 +815,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) /* ...update PLL if needed */ if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); - udelay(300); + usleep_range(300, 350); } /* ...set the PHY operating mode */ @@ -755,8 +831,19 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) * Post-initvals register modifications * \**************************************/ -/* TODO: Half/Quarter rate */ -static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, +/** + * ath5k_hw_tweak_initval_settings() - Tweak initial settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Some settings are not handled on initvals, e.g. bwmode + * settings, some phy settings, workarounds etc that in general + * don't fit anywhere else or are too small to introduce a separate + * function for each one. So we have this function to handle + * them all during reset and complete card's initialization. + */ +static void +ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) { if (ah->ah_version == AR5K_AR5212 && @@ -875,7 +962,16 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, } } -static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, +/** + * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Use settings stored on EEPROM to properly initialize the card + * based on various infos and per-mode calibration data. + */ +static void +ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; @@ -1029,7 +1125,23 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, * Main reset function * \*********************/ -int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, +/** + * ath5k_hw_reset() - The main reset function + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @channel: The &struct ieee80211_channel + * @fast: Enable fast channel switching + * @skip_pcu: Skip pcu initialization + * + * This is the function we call each time we want to (re)initialize the + * card and pass new settings to hw. We also call it when hw runs into + * trouble to make it come back to a working state. + * + * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO + * on failure. + */ +int +ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool fast, bool skip_pcu) { u32 s_seq[10], s_led[3], tsf_up, tsf_lo; @@ -1242,7 +1354,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* * Initialize PCU */ - ath5k_hw_pcu_init(ah, op_mode, mode); + ath5k_hw_pcu_init(ah, op_mode); /* * Initialize PHY |