diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_eeprom.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 52 |
1 files changed, 7 insertions, 45 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 6bb4db052bb0..1188db205e32 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -30,11 +30,6 @@ #define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) #define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) #define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) -#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ -#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */ -#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ -#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ -#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ #define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ @@ -2936,15 +2931,6 @@ static const struct ar9300_eeprom *ar9003_eeprom_struct_find_by_id(int id) #undef N_LOOP } - -static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz) -{ - if (fbin == AR5416_BCHAN_UNUSED) - return fbin; - - return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); -} - static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah) { return 0; @@ -4070,7 +4056,7 @@ static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah, * targetpower piers stored on eeprom */ for (i = 0; i < numPiers; i++) { - freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz); targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; } @@ -4106,7 +4092,7 @@ static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah, * from targetpower piers stored on eeprom */ for (i = 0; i < numPiers; i++) { - freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz); targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; } @@ -4142,7 +4128,7 @@ static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah, * targetpower piers stored on eeprom */ for (i = 0; i < numPiers; i++) { - freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); + freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], is2GHz); targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; } @@ -4167,7 +4153,7 @@ static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah, * targetpower piers stored on eeprom */ for (i = 0; i < numPiers; i++) { - freqArray[i] = FBIN2FREQ(pFreqBin[i], 1); + freqArray[i] = ath9k_hw_fbin2freq(pFreqBin[i], 1); targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; } @@ -4464,7 +4450,7 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah, is2GHz = 1; } - *pfrequency = FBIN2FREQ(*pCalPier, is2GHz); + *pfrequency = ath9k_hw_fbin2freq(*pCalPier, is2GHz); *pcorrection = pCalPierStruct->refPower; *ptemperature = pCalPierStruct->tempMeas; *pvoltage = pCalPierStruct->voltMeas; @@ -4789,30 +4775,8 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, bool is2ghz = IS_CHAN_2GHZ(chan); ath9k_hw_get_channel_centers(ah, chan, ¢ers); - scaledPower = powerLimit - antenna_reduction; - - /* - * Reduce scaled Power by number of chains active to get - * to per chain tx power level - */ - switch (ar5416_get_ntxchains(ah->txchainmask)) { - case 1: - break; - case 2: - if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; - else - scaledPower = 0; - break; - case 3: - if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; - else - scaledPower = 0; - break; - } - - scaledPower = max((u16)0, scaledPower); + scaledPower = ath9k_hw_get_scaled_power(ah, powerLimit, + antenna_reduction); /* * Get target powers from EEPROM - our baseline for TX Power @@ -5060,8 +5024,6 @@ static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, i, targetPowerValT2[i]); } - ah->txpower_limit = regulatory->max_power_level; - /* Write target power array to registers */ ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); ar9003_hw_calibration_apply(ah, chan->channel); |