diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/hw.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.h | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 3a28cdc19484..a207a70224c0 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -511,6 +511,15 @@ struct ath_gen_timer_table { * @setup_calibration: set up calibration * @iscal_supported: used to query if a type of calibration is supported * @loadnf: load noise floor read from each chain on the CCA registers + * + * @ani_reset: reset ANI parameters to default values + * @ani_lower_immunity: lower the noise immunity level. The level controls + * the power-based packet detection on hardware. If a power jump is + * detected the adapter takes it as an indication that a packet has + * arrived. The level ranges from 0-5. Each level corresponds to a + * few dB more of noise immunity. If you have a strong time-varying + * interference that is causing false detections (OFDM timing errors or + * CCK timing errors) the level can be increased. */ struct ath_hw_private_ops { /* Calibration ops */ @@ -554,6 +563,10 @@ struct ath_hw_private_ops { int param); void (*do_getnf)(struct ath_hw *ah, int16_t nfarray[NUM_NF_READINGS]); void (*loadnf)(struct ath_hw *ah, struct ath9k_channel *chan); + + /* ANI */ + void (*ani_reset)(struct ath_hw *ah); + void (*ani_lower_immunity)(struct ath_hw *ah); }; /** @@ -564,6 +577,11 @@ struct ath_hw_private_ops { * * @config_pci_powersave: * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC + * + * @ani_proc_mib_event: process MIB events, this would happen upon specific ANI + * thresholds being reached or having overflowed. + * @ani_monitor: called periodically by the core driver to collect + * MIB stats and adjust ANI if specific thresholds have been reached. */ struct ath_hw_ops { void (*config_pci_powersave)(struct ath_hw *ah, @@ -604,6 +622,9 @@ struct ath_hw_ops { u32 burstDuration); void (*set11n_virtualmorefrag)(struct ath_hw *ah, void *ds, u32 vmf); + + void (*ani_proc_mib_event)(struct ath_hw *ah); + void (*ani_monitor)(struct ath_hw *ah, struct ath9k_channel *chan); }; struct ath_hw { @@ -934,6 +955,14 @@ void ar9003_hw_attach_calib_ops(struct ath_hw *ah); void ar9002_hw_attach_ops(struct ath_hw *ah); void ar9003_hw_attach_ops(struct ath_hw *ah); +/* + * ANI work can be shared between all families but a next + * generation implementation of ANI will be used only for AR9003 only + * for now as the other families still need to be tested with the same + * next generation ANI. + */ +void ath9k_hw_attach_ani_ops_old(struct ath_hw *ah); + #define ATH_PCIE_CAP_LINK_CTRL 0x70 #define ATH_PCIE_CAP_LINK_L0S 1 #define ATH_PCIE_CAP_LINK_L1 2 |