diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/recv.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/recv.c | 834 |
1 files changed, 834 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c new file mode 100644 index 000000000000..5014a19b0f75 --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -0,0 +1,834 @@ +/* + * Copyright (c) 2008-2009 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ath9k.h" + +static struct ieee80211_hw * ath_get_virt_hw(struct ath_softc *sc, + struct ieee80211_hdr *hdr) +{ + struct ieee80211_hw *hw = sc->pri_wiphy->hw; + int i; + + spin_lock_bh(&sc->wiphy_lock); + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; + if (aphy == NULL) + continue; + if (compare_ether_addr(hdr->addr1, aphy->hw->wiphy->perm_addr) + == 0) { + hw = aphy->hw; + break; + } + } + spin_unlock_bh(&sc->wiphy_lock); + return hw; +} + +/* + * Setup and link descriptors. + * + * 11N: we can no longer afford to self link the last descriptor. + * MAC acknowledges BA status as long as it copies frames to host + * buffer (or rx fifo). This can incorrectly acknowledge packets + * to a sender if last desc is self-linked. + */ +static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_desc *ds; + struct sk_buff *skb; + + ATH_RXBUF_RESET(bf); + + ds = bf->bf_desc; + ds->ds_link = 0; /* link to null */ + ds->ds_data = bf->bf_buf_addr; + + /* virtual addr of the beginning of the buffer. */ + skb = bf->bf_mpdu; + ASSERT(skb != NULL); + ds->ds_vdata = skb->data; + + /* setup rx descriptors. The rx.bufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ + ath9k_hw_setuprxdesc(ah, ds, + sc->rx.bufsize, + 0); + + if (sc->rx.rxlink == NULL) + ath9k_hw_putrxbuf(ah, bf->bf_daddr); + else + *sc->rx.rxlink = bf->bf_daddr; + + sc->rx.rxlink = &ds->ds_link; + ath9k_hw_rxena(ah); +} + +static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) +{ + /* XXX block beacon interrupts */ + ath9k_hw_setantenna(sc->sc_ah, antenna); + sc->rx.defant = antenna; + sc->rx.rxotherant = 0; +} + +/* + * Extend 15-bit time stamp from rx descriptor to + * a full 64-bit TSF using the current h/w TSF. +*/ +static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) +{ + u64 tsf; + + tsf = ath9k_hw_gettsf64(sc->sc_ah); + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + return (tsf & ~0x7fff) | rstamp; +} + +static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len, gfp_t gfp_mask) +{ + struct sk_buff *skb; + u32 off; + + /* + * Cache-line-align. This is important (for the + * 5210 at least) as not doing so causes bogus data + * in rx'd frames. + */ + + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ + skb = __dev_alloc_skb(len + sc->cachelsz - 1, gfp_mask); + if (skb != NULL) { + off = ((unsigned long) skb->data) % sc->cachelsz; + if (off != 0) + skb_reserve(skb, sc->cachelsz - off); + } else { + DPRINTF(sc, ATH_DBG_FATAL, + "skbuff alloc of size %u failed\n", len); + return NULL; + } + + return skb; +} + +/* + * For Decrypt or Demic errors, we only mark packet status here and always push + * up the frame up to let mac80211 handle the actual error case, be it no + * decryption key or real decryption error. This let us keep statistics there. + */ +static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds, + struct ieee80211_rx_status *rx_status, bool *decrypt_error, + struct ath_softc *sc) +{ + struct ieee80211_hdr *hdr; + u8 ratecode; + __le16 fc; + struct ieee80211_hw *hw; + + hdr = (struct ieee80211_hdr *)skb->data; + fc = hdr->frame_control; + memset(rx_status, 0, sizeof(struct ieee80211_rx_status)); + hw = ath_get_virt_hw(sc, hdr); + + if (ds->ds_rxstat.rs_more) { + /* + * Frame spans multiple descriptors; this cannot happen yet + * as we don't support jumbograms. If not in monitor mode, + * discard the frame. Enable this if you want to see + * error frames in Monitor mode. + */ + if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR) + goto rx_next; + } else if (ds->ds_rxstat.rs_status != 0) { + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC) + rx_status->flag |= RX_FLAG_FAILED_FCS_CRC; + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY) + goto rx_next; + + if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) { + *decrypt_error = true; + } else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) { + if (ieee80211_is_ctl(fc)) + /* + * Sometimes, we get invalid + * MIC failures on valid control frames. + * Remove these mic errors. + */ + ds->ds_rxstat.rs_status &= ~ATH9K_RXERR_MIC; + else + rx_status->flag |= RX_FLAG_MMIC_ERROR; + } + /* + * Reject error frames with the exception of + * decryption and MIC failures. For monitor mode, + * we also ignore the CRC error. + */ + if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) { + if (ds->ds_rxstat.rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | + ATH9K_RXERR_CRC)) + goto rx_next; + } else { + if (ds->ds_rxstat.rs_status & + ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) { + goto rx_next; + } + } + } + + ratecode = ds->ds_rxstat.rs_rate; + + if (ratecode & 0x80) { + /* HT rate */ + rx_status->flag |= RX_FLAG_HT; + if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040) + rx_status->flag |= RX_FLAG_40MHZ; + if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI) + rx_status->flag |= RX_FLAG_SHORT_GI; + rx_status->rate_idx = ratecode & 0x7f; + } else { + int i = 0, cur_band, n_rates; + + cur_band = hw->conf.channel->band; + n_rates = sc->sbands[cur_band].n_bitrates; + + for (i = 0; i < n_rates; i++) { + if (sc->sbands[cur_band].bitrates[i].hw_value == + ratecode) { + rx_status->rate_idx = i; + break; + } + + if (sc->sbands[cur_band].bitrates[i].hw_value_short == + ratecode) { + rx_status->rate_idx = i; + rx_status->flag |= RX_FLAG_SHORTPRE; + break; + } + } + } + + rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp); + rx_status->band = hw->conf.channel->band; + rx_status->freq = hw->conf.channel->center_freq; + rx_status->noise = sc->ani.noise_floor; + rx_status->signal = rx_status->noise + ds->ds_rxstat.rs_rssi; + rx_status->antenna = ds->ds_rxstat.rs_antenna; + + /* at 45 you will be able to use MCS 15 reliably. A more elaborate + * scheme can be used here but it requires tables of SNR/throughput for + * each possible mode used. */ + rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45; + + /* rssi can be more than 45 though, anything above that + * should be considered at 100% */ + if (rx_status->qual > 100) + rx_status->qual = 100; + + rx_status->flag |= RX_FLAG_TSFT; + + return 1; +rx_next: + return 0; +} + +static void ath_opmode_init(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + u32 rfilt, mfilt[2]; + + /* configure rx filter */ + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(ah, rfilt); + + /* configure bssid mask */ + if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) + ath9k_hw_setbssidmask(sc); + + /* configure operational mode */ + ath9k_hw_setopmode(ah); + + /* Handle any link-level address change. */ + ath9k_hw_setmac(ah, sc->sc_ah->macaddr); + + /* calculate and install multicast filter */ + mfilt[0] = mfilt[1] = ~0; + ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]); +} + +int ath_rx_init(struct ath_softc *sc, int nbufs) +{ + struct sk_buff *skb; + struct ath_buf *bf; + int error = 0; + + spin_lock_init(&sc->rx.rxflushlock); + sc->sc_flags &= ~SC_OP_RXFLUSH; + spin_lock_init(&sc->rx.rxbuflock); + + sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN, + min(sc->cachelsz, (u16)64)); + + DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n", + sc->cachelsz, sc->rx.bufsize); + + /* Initialize rx descriptors */ + + error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf, + "rx", nbufs, 1); + if (error != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "failed to allocate rx descriptors: %d\n", error); + goto err; + } + + list_for_each_entry(bf, &sc->rx.rxbuf, list) { + skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL); + if (skb == NULL) { + error = -ENOMEM; + goto err; + } + + bf->bf_mpdu = skb; + bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, + sc->rx.bufsize, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(sc->dev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(skb); + bf->bf_mpdu = NULL; + DPRINTF(sc, ATH_DBG_FATAL, + "dma_mapping_error() on RX init\n"); + error = -ENOMEM; + goto err; + } + bf->bf_dmacontext = bf->bf_buf_addr; + } + sc->rx.rxlink = NULL; + +err: + if (error) + ath_rx_cleanup(sc); + + return error; +} + +void ath_rx_cleanup(struct ath_softc *sc) +{ + struct sk_buff *skb; + struct ath_buf *bf; + + list_for_each_entry(bf, &sc->rx.rxbuf, list) { + skb = bf->bf_mpdu; + if (skb) { + dma_unmap_single(sc->dev, bf->bf_buf_addr, + sc->rx.bufsize, DMA_FROM_DEVICE); + dev_kfree_skb(skb); + } + } + + if (sc->rx.rxdma.dd_desc_len != 0) + ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf); +} + +/* + * Calculate the receive filter according to the + * operating mode and state: + * + * o always accept unicast, broadcast, and multicast traffic + * o maintain current state of phy error reception (the hal + * may enable phy error frames for noise immunity work) + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when operating as a repeater so we see repeater-sta beacons + * - when scanning + */ + +u32 ath_calcrxfilter(struct ath_softc *sc) +{ +#define RX_FILTER_PRESERVE (ATH9K_RX_FILTER_PHYERR | ATH9K_RX_FILTER_PHYRADAR) + + u32 rfilt; + + rfilt = (ath9k_hw_getrxfilter(sc->sc_ah) & RX_FILTER_PRESERVE) + | ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST + | ATH9K_RX_FILTER_MCAST; + + /* If not a STA, enable processing of Probe Requests */ + if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION) + rfilt |= ATH9K_RX_FILTER_PROBEREQ; + + /* + * Set promiscuous mode when FIF_PROMISC_IN_BSS is enabled for station + * mode interface or when in monitor mode. AP mode does not need this + * since it receives all in-BSS frames anyway. + */ + if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) && + (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) || + (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR)) + rfilt |= ATH9K_RX_FILTER_PROM; + + if (sc->rx.rxfilter & FIF_CONTROL) + rfilt |= ATH9K_RX_FILTER_CONTROL; + + if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) && + !(sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC)) + rfilt |= ATH9K_RX_FILTER_MYBEACON; + else + rfilt |= ATH9K_RX_FILTER_BEACON; + + /* If in HOSTAP mode, want to enable reception of PSPOLL frames */ + if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) + rfilt |= ATH9K_RX_FILTER_PSPOLL; + + if (sc->sec_wiphy) { + /* TODO: only needed if more than one BSSID is in use in + * station/adhoc mode */ + /* TODO: for older chips, may need to add ATH9K_RX_FILTER_PROM + */ + rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL; + } + + return rfilt; + +#undef RX_FILTER_PRESERVE +} + +int ath_startrecv(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + struct ath_buf *bf, *tbf; + + spin_lock_bh(&sc->rx.rxbuflock); + if (list_empty(&sc->rx.rxbuf)) + goto start_recv; + + sc->rx.rxlink = NULL; + list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) { + ath_rx_buf_link(sc, bf); + } + + /* We could have deleted elements so the list may be empty now */ + if (list_empty(&sc->rx.rxbuf)) + goto start_recv; + + bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + ath9k_hw_putrxbuf(ah, bf->bf_daddr); + ath9k_hw_rxena(ah); + +start_recv: + spin_unlock_bh(&sc->rx.rxbuflock); + ath_opmode_init(sc); + ath9k_hw_startpcureceive(ah); + + return 0; +} + +bool ath_stoprecv(struct ath_softc *sc) +{ + struct ath_hw *ah = sc->sc_ah; + bool stopped; + + ath9k_hw_stoppcurecv(ah); + ath9k_hw_setrxfilter(ah, 0); + stopped = ath9k_hw_stopdmarecv(ah); + sc->rx.rxlink = NULL; + + return stopped; +} + +void ath_flushrecv(struct ath_softc *sc) +{ + spin_lock_bh(&sc->rx.rxflushlock); + sc->sc_flags |= SC_OP_RXFLUSH; + ath_rx_tasklet(sc, 1); + sc->sc_flags &= ~SC_OP_RXFLUSH; + spin_unlock_bh(&sc->rx.rxflushlock); +} + +static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) +{ + /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ + struct ieee80211_mgmt *mgmt; + u8 *pos, *end, id, elen; + struct ieee80211_tim_ie *tim; + + mgmt = (struct ieee80211_mgmt *)skb->data; + pos = mgmt->u.beacon.variable; + end = skb->data + skb->len; + + while (pos + 2 < end) { + id = *pos++; + elen = *pos++; + if (pos + elen > end) + break; + + if (id == WLAN_EID_TIM) { + if (elen < sizeof(*tim)) + break; + tim = (struct ieee80211_tim_ie *) pos; + if (tim->dtim_count != 0) + break; + return tim->bitmap_ctrl & 0x01; + } + + pos += elen; + } + + return false; +} + +static void ath_rx_ps_back_to_sleep(struct ath_softc *sc) +{ + sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB); +} + +static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb) +{ + struct ieee80211_mgmt *mgmt; + + if (skb->len < 24 + 8 + 2 + 2) + return; + + mgmt = (struct ieee80211_mgmt *)skb->data; + if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0) + return; /* not from our current AP */ + + if (sc->sc_flags & SC_OP_BEACON_SYNC) { + sc->sc_flags &= ~SC_OP_BEACON_SYNC; + DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on " + "timestamp from the AP\n"); + ath_beacon_config(sc, NULL); + } + + if (!(sc->hw->conf.flags & IEEE80211_CONF_PS)) { + /* We are not in PS mode anymore; remain awake */ + DPRINTF(sc, ATH_DBG_PS, "Not in PS mode anymore, remain " + "awake\n"); + sc->sc_flags &= ~(SC_OP_WAIT_FOR_BEACON | SC_OP_WAIT_FOR_CAB); + return; + } + + if (ath_beacon_dtim_pending_cab(skb)) { + /* + * Remain awake waiting for buffered broadcast/multicast + * frames. + */ + DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating " + "buffered broadcast/multicast frame(s)\n"); + sc->sc_flags |= SC_OP_WAIT_FOR_CAB; + return; + } + + if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) { + /* + * This can happen if a broadcast frame is dropped or the AP + * fails to send a frame indicating that all CAB frames have + * been delivered. + */ + DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n"); + } + + /* No more broadcast/multicast frames to be received at this point. */ + ath_rx_ps_back_to_sleep(sc); +} + +static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr; + + hdr = (struct ieee80211_hdr *)skb->data; + + /* Process Beacon and CAB receive in PS state */ + if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) && + ieee80211_is_beacon(hdr->frame_control)) + ath_rx_ps_beacon(sc, skb); + else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) && + (ieee80211_is_data(hdr->frame_control) || + ieee80211_is_action(hdr->frame_control)) && + is_multicast_ether_addr(hdr->addr1) && + !ieee80211_has_moredata(hdr->frame_control)) { + DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to " + "sleep\n"); + /* + * No more broadcast/multicast frames to be received at this + * point. + */ + ath_rx_ps_back_to_sleep(sc); + } else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) && + !is_multicast_ether_addr(hdr->addr1) && + !ieee80211_has_morefrags(hdr->frame_control)) { + sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA; + DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having " + "received PS-Poll data (0x%x)\n", + sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | + SC_OP_WAIT_FOR_CAB | + SC_OP_WAIT_FOR_PSPOLL_DATA | + SC_OP_WAIT_FOR_TX_ACK)); + } +} + +static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb, + struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_hdr *hdr; + + hdr = (struct ieee80211_hdr *)skb->data; + + /* Send the frame to mac80211 */ + if (is_multicast_ether_addr(hdr->addr1)) { + int i; + /* + * Deliver broadcast/multicast frames to all suitable + * virtual wiphys. + */ + /* TODO: filter based on channel configuration */ + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; + struct sk_buff *nskb; + if (aphy == NULL) + continue; + nskb = skb_copy(skb, GFP_ATOMIC); + if (nskb) + __ieee80211_rx(aphy->hw, nskb, rx_status); + } + __ieee80211_rx(sc->hw, skb, rx_status); + } else { + /* Deliver unicast frames based on receiver address */ + __ieee80211_rx(ath_get_virt_hw(sc, hdr), skb, rx_status); + } +} + +int ath_rx_tasklet(struct ath_softc *sc, int flush) +{ +#define PA2DESC(_sc, _pa) \ + ((struct ath_desc *)((caddr_t)(_sc)->rx.rxdma.dd_desc + \ + ((_pa) - (_sc)->rx.rxdma.dd_desc_paddr))) + + struct ath_buf *bf; + struct ath_desc *ds; + struct sk_buff *skb = NULL, *requeue_skb; + struct ieee80211_rx_status rx_status; + struct ath_hw *ah = sc->sc_ah; + struct ieee80211_hdr *hdr; + int hdrlen, padsize, retval; + bool decrypt_error = false; + u8 keyix; + __le16 fc; + + spin_lock_bh(&sc->rx.rxbuflock); + + do { + /* If handling rx interrupt and flush is in progress => exit */ + if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0)) + break; + + if (list_empty(&sc->rx.rxbuf)) { + sc->rx.rxlink = NULL; + break; + } + + bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list); + ds = bf->bf_desc; + + /* + * Must provide the virtual address of the current + * descriptor, the physical address, and the virtual + * address of the next descriptor in the h/w chain. + * This allows the HAL to look ahead to see if the + * hardware is done with a descriptor by checking the + * done bit in the following descriptor and the address + * of the current descriptor the DMA engine is working + * on. All this is necessary because of our use of + * a self-linked list to avoid rx overruns. + */ + retval = ath9k_hw_rxprocdesc(ah, ds, + bf->bf_daddr, + PA2DESC(sc, ds->ds_link), + 0); + if (retval == -EINPROGRESS) { + struct ath_buf *tbf; + struct ath_desc *tds; + + if (list_is_last(&bf->list, &sc->rx.rxbuf)) { + sc->rx.rxlink = NULL; + break; + } + + tbf = list_entry(bf->list.next, struct ath_buf, list); + + /* + * On some hardware the descriptor status words could + * get corrupted, including the done bit. Because of + * this, check if the next descriptor's done bit is + * set or not. + * + * If the next descriptor's done bit is set, the current + * descriptor has been corrupted. Force s/w to discard + * this descriptor and continue... + */ + + tds = tbf->bf_desc; + retval = ath9k_hw_rxprocdesc(ah, tds, tbf->bf_daddr, + PA2DESC(sc, tds->ds_link), 0); + if (retval == -EINPROGRESS) { + break; + } + } + + skb = bf->bf_mpdu; + if (!skb) + continue; + + /* + * Synchronize the DMA transfer with CPU before + * 1. accessing the frame + * 2. requeueing the same buffer to h/w + */ + dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, + sc->rx.bufsize, + DMA_FROM_DEVICE); + + /* + * If we're asked to flush receive queue, directly + * chain it back at the queue without processing it. + */ + if (flush) + goto requeue; + + if (!ds->ds_rxstat.rs_datalen) + goto requeue; + + /* The status portion of the descriptor could get corrupted. */ + if (sc->rx.bufsize < ds->ds_rxstat.rs_datalen) + goto requeue; + + if (!ath_rx_prepare(skb, ds, &rx_status, &decrypt_error, sc)) + goto requeue; + + /* Ensure we always have an skb to requeue once we are done + * processing the current buffer's skb */ + requeue_skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_ATOMIC); + + /* If there is no memory we ignore the current RX'd frame, + * tell hardware it can give us a new frame using the old + * skb and put it at the tail of the sc->rx.rxbuf list for + * processing. */ + if (!requeue_skb) + goto requeue; + + /* Unmap the frame */ + dma_unmap_single(sc->dev, bf->bf_buf_addr, + sc->rx.bufsize, + DMA_FROM_DEVICE); + + skb_put(skb, ds->ds_rxstat.rs_datalen); + skb->protocol = cpu_to_be16(ETH_P_CONTROL); + + /* see if any padding is done by the hw and remove it */ + hdr = (struct ieee80211_hdr *)skb->data; + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; + + /* The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. The general calculation for + * padsize would take into account odd header lengths: + * padsize = (4 - hdrlen % 4) % 4; However, since only + * even-length headers are used, padding can only be 0 or 2 + * bytes and we can optimize this a bit. In addition, we must + * not try to remove padding from short control frames that do + * not have payload. */ + padsize = hdrlen & 3; + if (padsize && hdrlen >= 24) { + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + + keyix = ds->ds_rxstat.rs_keyix; + + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) { + rx_status.flag |= RX_FLAG_DECRYPTED; + } else if (ieee80211_has_protected(fc) + && !decrypt_error && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; + + if (test_bit(keyix, sc->keymap)) + rx_status.flag |= RX_FLAG_DECRYPTED; + } + if (ah->sw_mgmt_crypto && + (rx_status.flag & RX_FLAG_DECRYPTED) && + ieee80211_is_mgmt(fc)) { + /* Use software decrypt for management frames. */ + rx_status.flag &= ~RX_FLAG_DECRYPTED; + } + + /* We will now give hardware our shiny new allocated skb */ + bf->bf_mpdu = requeue_skb; + bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data, + sc->rx.bufsize, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(sc->dev, + bf->bf_buf_addr))) { + dev_kfree_skb_any(requeue_skb); + bf->bf_mpdu = NULL; + DPRINTF(sc, ATH_DBG_FATAL, + "dma_mapping_error() on RX\n"); + ath_rx_send_to_mac80211(sc, skb, &rx_status); + break; + } + bf->bf_dmacontext = bf->bf_buf_addr; + + /* + * change the default rx antenna if rx diversity chooses the + * other antenna 3 times in a row. + */ + if (sc->rx.defant != ds->ds_rxstat.rs_antenna) { + if (++sc->rx.rxotherant >= 3) + ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna); + } else { + sc->rx.rxotherant = 0; + } + + if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON | + SC_OP_WAIT_FOR_PSPOLL_DATA))) + ath_rx_ps(sc, skb); + + ath_rx_send_to_mac80211(sc, skb, &rx_status); + +requeue: + list_move_tail(&bf->list, &sc->rx.rxbuf); + ath_rx_buf_link(sc, bf); + } while (1); + + spin_unlock_bh(&sc->rx.rxbuflock); + + return 0; +#undef PA2DESC +} |